MTL-1X: Key Features
MTL-1X: Key Features
Key Features:
Dual Horn-Loaded EVX-180B 18 LF Transducers for Reliable, Extended Low Frequency Output 1200W Continuous (4800W Peak) Power Handling High-Efficiency Sub-ScoopTM Design Horn Loading Provides Increased Throw Rugged, Road-Ready Cabinet with Metal Grille and Black Carpet Finish Neutrik Speakon Inputs Rear Casters for Improved Portability
General Description:
The Electro-Voice MTL-1X is a 1,200-watt subwoofer loudspeaker system which combines the attributes of both horn-loaded and vented box designs. The MTL-1X design utilizes the unique double SubScoop cabinet construction with two EVX-180B woofers, as used in XArrayTM concert systems. The design behaves like a horn over much of its range, but without the time delay and weight problems usually associated with conventional designs. Vented-box principles take over for the lowest octave and assist in producing exceptionally high levels of clean, punchy bass from a modest-sized box. The reverse woofer orientation has been used to optimize the rear chamber volume and decrease the horn flare rate for extended low end performance. When used with the MTH-1 mid/high module, the MTL-1X provides high-output sound reinforcement for clubs, large halls, or outdoor events in a compact package which can be moved easily by a two-person crew. Although the MTL-1X was designed for use with the MTH-1 system, it may be used to augment the bass performance of any Electro-Voice stage system.
Technical Specifications:
Freq. Response1 (-3 dB): 52 Hz - 160 Hz Freq. Range1 (-10 dB): 46 Hz - 200 Hz Axial Sensitivity: 101 dB (1W/1m) Max Calculated SPL1: 138 dB Horizontal Coverage: Omnidirectional Vertical Coverage: Omnidirectional Rated System Power: 1200W Continuous, 4800W Peak LF Transducers: (2) EVX-180B, 18 in. (457mm) Drivers Recommended Crossover 80 Hz - 160 Hz Frequency: Nominal Impedance: 4 Ohms Connectors: (2) Neutrik Speakon NL4's Enclosure Material: 3/4" Plywood with Black Carpet Grille: Polyester Powder Coated, Full-Length Steel with Rotatable Logo Dim (H x W x D): 1163mm x 572mm x 758mm (45.8" x 22.50" x 29.85) Net Weight: 75.0 kg (165 lbs) Shipping Weight: 86.4 kg (190 lbs)
1
Dimension Drawings:
Frequency Response:
110
100
SPL in dB
90
80
Top View
FREQUENCY IN HERTZ
Performance Match
D170401 D170312 D170348
Front View
Right View
Diagram Note: This wiring results in positive acoustic pressure with a positive voltage at the input because the woofers are physically reversed.
Diagram Note: This wiring results in positive acoustic pressure with a positive voltage at the input because the woofers are physically reversed.
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
Telex Communications, Inc. 7/2006 Part Number 534861 Rev. B
U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.