Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    Metis Datasheet

    Uploaded by

    bhasker sharma
    The Metis intelligent controller is used in HVAC and building management systems to control devices like chillers, pumps, cooling towers, and air handling units. It features chiller plant management using add-on cards, pump control via variable frequency drives based on sensor feedback, and cooling tower operation control according to wet bulb temperature. The Metis has inputs and outputs for analog, digital and relay signals and is powered by 12VDC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Metis Datasheet

    Uploaded by

    bhasker sharma
    50 views4 pages
    The Metis intelligent controller is used in HVAC and building management systems to control devices like chillers, pumps, cooling towers, and air handling units. It features chiller plant management using add-on cards, pump control via variable frequency drives based on sensor feedback, and cooling tower operation control according to wet bulb temperature. The Metis has inputs and outputs for analog, digital and relay signals and is powered by 12VDC.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Metis intelligent controller is used in HVAC and building management systems to control devices like chillers, pumps, cooling towers, and air handling units. It features chiller plant management using add-on cards, pump control via variable frequency drives based on sensor feedback, and cooling tower operation control according to wet bulb temperature. The Metis has inputs and outputs for analog, digital and relay signals and is powered by 12VDC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    50 views4 pages

    Metis Datasheet

    Uploaded by

    bhasker sharma
    The Metis intelligent controller is used in HVAC and building management systems to control devices like chillers, pumps, cooling towers, and air handling units. It features chiller plant management using add-on cards, pump control via variable frequency drives based on sensor feedback, and cooling tower operation control according to wet bulb temperature. The Metis has inputs and outputs for analog, digital and relay signals and is powered by 12VDC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    METWG-RY22

    METISDATA SHEET

    PRODUCT DESCRIPTION

    Metis is an Intelligent controller that is used in HVAC and BMS devices such
    as Chiller, Pumps, Cooling towers, AHU, STP, WTP etc. This device is smart
    enough to control all devices with its inbuilt algorithm.

    FEATURES

    HVAC
    CHILLER PLANT MANAGEMENT (CPM) using multiple add-on cards using
    wired/wireless peer-peer integration.

    Pump integration modulates the speed of the pump based on the sensor
    feedback, differential pressure transmitters, and flow meters.

    According to the wet bulb temperature and ambient conditions, the


    CONTROLLER decides the operation of cooling towers and their running
    speed by controlling the associated VFDs.

    Temperature sensor-based actuator controller with an efficient energy


    management system using Delta T and water balancing algorithms
    ZBMETWG-RY22
    METIS
    DATA SHEET

    GENERAL SPECIFICATIONS

    DIMENSIONS 160 X 91 X 62 MM (LXWXH)

    APPLICATION HVAC (Low-Side, High-Side Integration)


    Building Management System (BMS)

    INSTALLATION din rail mounting following din 43880


    (top hat rail en50022)

    OPERATING CONDITION 0°C to 50 °C, 10–90 % RH, non-condensing,


    Degree of protection: IP40, IP20 (terminals)

    INTERFACE 1x RS‑485 Modbus RTU (Master or Slave)


    1x RS‑485 Modbus RTU (ext-BMS integration)
    1x Wireless EXT-Cards Integration
    1x WIFI (Cloud)
    1x GSM (Cloud)

    DISPLAY 1.8-Inch TFT Display


    Membrane switch for local operation

    MAX N: OF EXT-CARD 18 Nos (Peat to pear)


    Up to 256 Nos of wireless IO

    SPECIFICATIONS

    MODEL NUMBER ZBMETWG-RY22

    MEMORY 16MB Flash memory


    7 Days data backup in case of network failure

    POWER SUPPLY 12 VDC/2 AMPS

    NTC 4 Nos-3K

    DI 6 Nos-5VDC

    DO 3 Nos-24VDC/5AMPS

    AI 4 Nos-4-20mA
    4 Nos-0-10VDC

    AO 3 Nos-10V@50mA Max
    ZBMETWG-RY22
    METIS
    DATA SHEET

    DIMENSION

    IO DETAILS
    ZBMETWG-RY22
    METISDATA SHEET

    CONNECTOR DESCRIPTION

    +V +12VDC Input power supply


    -V Power supply reference
    G Power supply common
    B (-)Terminal for RS485 connection to IO card
    A (+)Terminal for RS485 connection to IO card
    B1 (-)Terminal for RS485 connection to EXT-BMS
    A1 (+)Terminal for RS485 connection to EXT-BMS
    G1 Common for analog Output/Input
    AO1 Analog Output.1 ,0 TO 10V
    AO2 Analog Output.2 ,0 TO 10V
    AO3 Analog Output.3 ,0 TO 10V
    AI1 Analog Input.1 ,4 TO 20ma
    AI2 Analog Input.2 ,0 TO 10V
    AI3 Analog Input.3 ,0 TO 10V
    AI4 Analog Input.4 ,0 TO 10V
    AI5 Analog Input.5 ,0 TO 10V
    AI6 Analog Input.6 ,4 TO 20ma
    AI7 Analog Input.7 ,4 TO 20ma
    AI8 Analog Input.8 ,4 TO 20ma
    C1 Common for relay.1
    NC1 Normally close contact for relay.1
    NO1 Normally open contact for relay.1
    C2 Common for relay.2
    NC2 Normally close contact for relay.2
    NO2 Normally open contact for relay.2
    C3 Common for relay.3
    NC3 Normally close contact for relay.3
    NO3 Normally open contact for relay.3
    V 5 V for Digital inputs
    DI1 Digital input.1 ,5 VDC
    DI2 Digital input.2 ,5 VDC
    DI3 Digital input.3 ,5 VDC
    DI4 Digital input.4 ,5 VDC
    DI5 Digital input.5 ,5 VDC
    DI6 Digital input.6 ,5 VDC
    V1 2.5V For NTC Inputs
    NT1 Passive Analog Input.1(NTC-3K)
    NT2 Passive Analog Input.2(NTC-3K)
    NT3 Passive Analog Input.3(NTC-3K)
    NT4 Passive Analog Input.4(NTC-3K)

    You might also like