Professional Documents
Culture Documents
ICSE Class 10 Physics Previous Year Question Paper 2018
ICSE Class 10 Physics Previous Year Question Paper 2018
Paper 2018
PHYSICS
SCIENCE Paper – 1
(Two hours)
The time given at the head of this Paper is the time allowed for writing the answers.
The intended marks for questions or parts of questions are given in brackets [ ].
(ii) How is the unit horse power related to the S.I. unit of power?
(b) State the energy changes in the following cases while in use: [2]
(ii) Without changing the dimensions of the lever, if the load is shifted towards
the fulcrum what happens to the mechanical advantage of the lever?
Turn over
(d) (i) Why is the ratio of the velocities of light of wavelengths 4000Å and 8000Å [2]
in vacuum 1:1?
(e) (i) Why is the motion of a body moving with a constant speed around a [2]
circular path said to be accelerated?
2𝐾
(ii) Name the unit of physical quantity obtained by the formula .
𝑉2
Where K: kinetic energy, V: Linear velocity.
Question 2
(a) The power of a lens is –5D. [2]
(b) State the position of the object in front of a converging lens if: [2]
(c) (i) State the relation between the critical angle and the absolute refractive [2]
index of a medium.
(ii) Which colour of light has a higher critical angle? Red light or Green light.
2
(e) The following diagram shows a 60o, 30o, 90o glass prism of critical angle 42o. [2]
Copy the diagram and complete the path of incident ray AB emerging out of the
prism marking the angle of incidence on each surface.
Question 3
(a) Displacement distance graph of two sound waves A and B, travelling in a [2]
medium, are as shown in the diagram below.
(b) You have three resistors of values 2Ω, 3Ω and 5Ω. How will you join them so [2]
that the total resistance is more than 7Ω?
3 Turn Over
(c) (i) What do you understand by the term nuclear fusion? [2]
(ii) Nuclear power plants use nuclear fission reaction to produce electricity.
What is the advantage of producing electricity by fusion reaction?
(ii) Why does the amplitude of a vibrating body continuously decrease during
damped vibrations?
(e) (i) How is the e.m.f. across primary and secondary coils of a transformer [2]
related with the number of turns of coil in them?
Question 4
(a) (i) How can a temperature in degree Celsius be converted into S.I. unit of [2]
temperature?
(ii) A liquid X has the maximum specific heat capacity and is used as a coolant
in Car radiators. Name the liquid X.
(b) A solid metal weighing 150 g melts at its melting point of 800 oC by providing [2]
heat at the rate of 100 W. The time taken for it to completely melt at the same
temperature is 4 min. What is the specific latent heat of fusion of the metal?
(ii) The wire is connected to the top terminal of a three pin socket.
(e) State any two advantages of electromagnets over permanent magnets. [2]
4
SECTION II (40 Marks)
Attempt any four questions from this Section
Question 5
(a) (i) Derive a relationship between S.I. and C.G.S. unit of work. [3]
(ii) A force acts on a body and displaces it by a distance S in a direction at an
angle θ with the direction of force. What should be the value of to get the
maximum positive work?
(b) A half metre rod is pivoted at the centre with two weights of 20 gf and 12 gf [3]
suspended at a perpendicular distance of 6 cm and 10 cm from the pivot
respectively as shown below.
50 cm
20gf 12gf
6 cm 10 cm
(i) Which of the two forces acting on the rigid rod causes clockwise moment?
(c) (i) Draw a diagram to show a block and tackle pulley system having a velocity [4]
ratio of 3 marking the direction of load(L), effort(E) and tension(T).
(ii) The pulley system drawn lifts a load of 150 N when an effort of 60 N is
applied. Find its mechanical advantage.
5 Turn Over
Question 6
(a) A ray of light XY passes through a right angled isosceles prism as shown below. [3]
(i) What is the angle through which the incident ray deviates and emerges out
of the prism?
(ii) Name the instrument where this action of prism is put into use.
(b) An object AB is placed between O and F1 on the principal axis of a converging [3]
lens as shown in the diagram.
Copy the diagram and by using three standard rays starting from point A, obtain
an image of the object AB.
(c) An object is placed at a distance of 12 cm from a convex lens of focal length [4]
8 cm. Find:
6
Question 7
(a) Draw the diagram of a right angled isosceles prism which is used to make an [3]
inverted image erect.
(b) [3]
The diagram above shows a wire stretched over a sonometer. Stems of two
vibrating tuning forks A and B are touched to the wooden box of the sonometer.
It is observed that the paper rider (a small piece of paper folded at the centre)
present on the wire flies off when the stem of vibrating tuning fork B is touched
to the wooden box but the paper just vibrates when the stem of vibrating tuning
fork A is touched to the wooden box.
(i) Name the phenomenon when the paper rider just vibrates.
(ii) Name the phenomenon when the paper rider flies off.
(iii) Why does the paper rider fly off when the stem of tuning fork B is touched
to the box?
(c) A person is standing at the sea shore. An observer on the ship which is anchored [4]
in between a vertical cliff and the person on the shore, fires a gun. The person
on the shore hears two sounds, 2 seconds and 3 seconds after seeing the smoke
of the fired gun. If the speed of sound in the air is 320 ms-1 then calculate:
(i) the distance between the observer on the ship and the person on the shore.
(ii) the distance between the cliff and the observer on the ship.
7 Turn Over
Question 8
(a) (i) A fuse is rated 8A. Can it be used with an electrical appliance rated 5 KW, [3]
200 V? Give a reason.
(ii) Name two safety devices which are connected to the live wire of a
household electric circuit.
(ii) State whether the resistivity of a wire changes with the change in the
thickness of the wire.
(i) If the iron is used for 2h daily find the cost of running it for one week if it
costs ` 4.25 per kWh.
Question 9
(a) (i) Heat supplied to a solid changes it into liquid. What is this change in phase [3]
called?
(ii) During the phase change does the average kinetic energy of the molecules
of the substance increase?
(iii) What is the energy absorbed during the phase change called?
(b) (i) State two differences between “Heat Capacity” and “Specific Heat [3]
Capacity”.
(ii) Give a mathematical relation between Heat Capacity and Specific Heat
Capacity.
8
(c) The temperature of 170g of water at 50°C is lowered to 5°C by adding certain [4]
amount of ice to it. Find the mass of ice added.
Given: Specific heat capacity of water = 4200 J kg-1 ⁰C-1 and Specific latent
heat of ice = 336000 J kg-1
Question 10
(a) [3]
The diagram shows a coil wound around a U shape soft iron bar AB.
(i) What is the polarity induced at the ends A and B when the switch is
pressed?
(ii) Suggest one way to strengthen the magnetic field in the electromagnet.
(iii) What will be the polarities at A & B if the direction of current is reversed
in the circuit?
(b) The ore of Uranium found in nature contains 92U238 and 92U235. Although both [3]
the isotopes are fissionable, it is found out experimentally that one of the two
isotopes is more easily fissionable.
(iii) Write a nuclear reaction when Uranium 238 emits an alpha particle to form
a Thorium (Th) nucleus.
9 Turn Over
(c) Radiations given out from a source when subjected to an electric field in a [4]
direction perpendicular to their path are shown below in the diagram. The
arrows show the path of the radiation A, B and C. Answer the following
questions in terms of A, B and C.
B
A
(iii) Which among the three causes the least biological damage externally?
10