The document describes the VIN LMI.PL01 load monitoring and indication system for pipe layers. The system monitors load weight, roll, pitch, boom angle, block position and sends alarms if limits are exceeded to comply with ASME B30.14 safety standards. It uses smart sensors, load cells and an LCD display with data logging, firmware updates, and a 2 year warranty. The customizable wireless system monitors all critical parameters for safe pipe laying operations.
The document describes the VIN LMI.PL01 load monitoring and indication system for pipe layers. The system monitors load weight, roll, pitch, boom angle, block position and sends alarms if limits are exceeded to comply with ASME B30.14 safety standards. It uses smart sensors, load cells and an LCD display with data logging, firmware updates, and a 2 year warranty. The customizable wireless system monitors all critical parameters for safe pipe laying operations.
The document describes the VIN LMI.PL01 load monitoring and indication system for pipe layers. The system monitors load weight, roll, pitch, boom angle, block position and sends alarms if limits are exceeded to comply with ASME B30.14 safety standards. It uses smart sensors, load cells and an LCD display with data logging, firmware updates, and a 2 year warranty. The customizable wireless system monitors all critical parameters for safe pipe laying operations.
LOAD MONITORING AND INDICATION SYSTEM for PIPE LAYERS
complying to ASME B30.14 ( Model : VIN LMI.PL01)
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 [email protected]
Load Monitoring & Indication Systems • User Friendly System which can be used by any skill sets, who understands number • Alarms for Maximum load, Roll , Pitch, Angles as per manufacturer guidelines. Configured as per machine specification. • Complies to the safety requirement of ASME B30.14. • Data logged for evaluation • Over the air FIRMWARE update on availability of internet. • Solid State construction made specifically for Pipe Layers • Wireless and wired options available • Battery Status of the devices • 12-24V connection of device to vehicle power, 7inch LCD monitor
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 ;[email protected]
Load Cell • Factory calibrated, free-rotating load sensing device capable of 360° operation without adjustments. • Each load pin is custom-fitted to the necessary application and is designed for a minimum safety factor of 5:1. Existing Pin will replaced by the LOAD cell pin • Operating Temperature Range : -10 degC to 60 deg C, IP 67, 65mm diameter PIN. • Wireless transmission, 2.4GHz BLE or Wired • Battery life : 5 years( free replacement) or Wired • Serviceable : 10 years • Material Construction : Stainless Steel • Following reading will be derived from this : - Real Time load and www.vin-systems.com Allowed Load Model : VIN LMI.PL01 +966 503850741 [email protected] Smart Level Sensor • Smart Level Sensor indicated the level (within 0.1° accuracy), sending a signal for alarm if necessary. • The sensor is most useful in situations where there may be SANDY ground, sinking mud or extreme wind. • Operating temperature -40°C to +60°C, IP67 • Operating Frequency Range 2.4GHz BLE • Wired and Wireless options available • Reading Derived: -ROLL -PITCH
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 [email protected]
Smart Angle Sensor • SmartAngle Sensor indicated the angle(within 0.1° accuracy), sending a signal for alarm if necessary. • The sensor is most useful in situations to define the angle, overhang and height • Operating temperature -40°C to +60°C, IP67 • Operating Frequency Range 2.4GHz BLE • Wired and Wireless options • Reading Derived: • - Angle of boom • Overhang of boom • Height of boom
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 [email protected]
Anti Two Block
• Sensor to monitor the travelling block and when
the block makes contact with the counterbalance of the A2B it sends signal to the controller /LCD. • Operating temperature -40°C to +60°C, IP67 • Operating Frequency Range 2.4GHz BLE • Wired and Wireless options • Reading Derived: • Block position
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 [email protected]
KEY Unique Features: - Can be installed on ANY pipe layers, Pipelayer need not be modified - Data Required for Calibration : - Approved & recommended Load Chart of the equipment - Calibrated LOAD block - Built for harsh weather condition - Components are IP67, 12 -24V DC - Warranty for 2 years for systems failure ( doesn’t include damages) - with inbuilt QR code to define the calibration status - Replaceable spare parts and Spare parts availably guarantee
www.vin-systems.com Model : VIN LMI.PL01 +966 503850741 [email protected]