TL494
TL494
, LTD
TL494 LINEAR INTEGRATED CIRCUIT
DESCRIPTION
The UTC TL494 incorporates all the functions required in the
construction of a pulse-width modulation switching circuit.
Designed primarily for switching power supply control or DC-DC
convectors, it offers the systems engineer the flexibility to tailor
control circuitry to its own application.
FEATURES
*Complete PWM power control circuitry
*Uncommitted outputs for 200mA sink or source current Lead Free:TL494L
*Output control selects single ended or push pull operation Halogen Free:TL494G
*Internal circuitry prohibits double pulses over total range
*Easy synchronization
ORDERING INFORMATION
Ordering Number
Package Packing
Normal Lead Free Plating Halogen Free
TL494-D16-T TL494L-D16-T TL494G-D16-T DIP-16 Tube
TL494-S16-R TL494L-S16-R TL494G-S16-R SOP-16 Tape Reel
www.unisonic.com.tw 1 of 7
Copyright © 2009 Unisonic Technologies Co., Ltd QW-R103-004,F
TL494 LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
BLOCK DIAGRAM
13
Input
control
Pulse Steering
8 C1
Flip-Flop
RT Q Q1
9 E1
6 T
CT oscillator 11 C2
5 Q2
Q
10 E2
Vcc=15V
2W 150 2W 150
12
TEST
INPUTS 4 Vcc 8
DEAD-TIME C1
3 9
OUTPUT 1
FEEDBACK E1
12k
6
RT
5 11
CT C2
0.01 F 1 10
OUTPUT 2
E2
2
16 ERROR AMPLIFIER
15
50k GND
7
VOLTAGE at C1
VOLTAGE at C2
VOLTAGE at CT
THRESHOLD VOLTAGE
FEEDBACK
TEST CIRCUIT(Cont.)
ERROR
1 AMPLIFIER
Vin
FEEDBACK
2 TERMINAL
16
Vref 15
ERROR
AMPLIFIER
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.