19c43b2f b1bd

TIME WELDER
TIME GROUP INC.

FAMOUS BRAND OF CHINA
Catalog of welder
TIME Welder
Famous Brand of China
ISO9001 Quality System Certificated

ISO14001 Environmental Management System Certificated
OHSAS18001 Occupational Health and Safety Management System Certificated
CHINA CCC Certificated
1
CHINA Energy Conservation Product Certificated
Company Profile
BEIJING TIME TECHNOLOGIES CO.,LTD.
Beijing Time Technologies Co., Ltd was established in 2001. It was a new company initiated by TIME Group with cooperation with
Tsinghua unisplendour, Lenovo Group, Daheng Group, Stone Group and other companies, mainly engaged in development, production and
sale of the inverter welder, large welding equipments, welding machine for special purpose, CNC cutting machines and arc welding robots.
On March 31, 2006, Beijing Time Technologies Co., Ltd was listed on the Shenzhen Stock Exchange through agency share transfer system,
which is the first listed company among the welder manufacturing industry in China. On October 26, 2006, Beijing Time initiated Third Market
financing for implementation of target placement, providing better opportunities and conditions for rapid development of the company.
TIME Group Inc. adheres to the key principle "Technology, Industry and export are the lifeblood of TIME Group Inc." the State
Secretary. Through development for many years, the company has formed a set of strict management system for technological development,
products manufacturing, quality control, financial operation, marketing and customer service. At present, our welding machines passed the
national "3C" certification and named "Beijing Famous Brand" for four consecutive years. In 1995, we passed the ISO9001 quality system
certification. In 2008, we passed Environmental Management System (ISO14001:2004) and Occupational Health and Safety Management
System (OHSMS18001:2001) certification. Therefore TIME Group Inc. becomes the first corporation in welder manufacturing industry in
China who had passed the certification of above management systems. Among the welder enterprises in China, TIME Group Inc. is the only
one who established the mobile postdoctoral center. There are more than 40 sale and service subsidiaries, sales and service network all
over the country.
TIME Group Inc. started development, production and sales of IGBT inverter welder in 1993. Now all our produces are IGBT inverter
welders. Adhere to the product development objective of "Domestic first-class, advanced in the world, seeking the first instead of the only"
and along the development route of constantly digital, green, automation and innovative, TIME Group Inc. provides high-quality perfect
welders to the society. Currently the IGBT inverter welders of TIME Group Inc. ranks for the first of domestic total sales. TIME Group Inc.
has become the largest inverter welder R&D, manufacturing and sales enterprises for many years. There are over ten series and more than
70 kinds of welding machines. In 2003, TIME Group Inc. adopted digital DSP technology in the field of domestic welders, occupying the
commanding heights of domestic welding technology. In October 2007, we formed the Jinan Times New ERA Technology Co., Ltd, which is
now a wholly owned subsidiary of TIME Group Inc., mainly engaged in the development, production and sales of large welding equipment,
special welders, CNC cutting machine. The large welding equipment of TIME Group Inc. has been widely used in wind power, boilers,
pressure vessels and other industries. In 2013, our third generation TD series digital welders were pushed to the market by batch, occupying
the commanding heights of the domestic digital welders.
In 2009, we invested several hundred million RMB in Jinan Hi-tech Development Zone for hundreds of acres of land for construction
of the world's most advanced welder manufacturing base with annual output of 300,000 units. The base was officially put into production in
2013. After continuous exploration and research, the TIME welding robots went debut in 2010 Essen Welding Show, which got the market
and user's attention at once. With years of experience in manufacturing of welders and auxiliary machinery, the reliability, integration
capabilities of our robots and spare parts supply can be effectively guaranteed. TIME welder robots are perfect combination of sophisticated
welding skills and efficient automation. In the same year, we promoted the development of civil welder market, introducing a full line of light
and durable small welders, which reinforces TIME brand position in the field of civilian welder, broadening the application of TIME products.
Under the quality policy of "outstanding high-tech products, high quality, customer satisfaction," our welders provide a guarantee in
electricity, water, shipbuilding, metallurgy, chemical industry, bridges, oil and gas, installation and many other construction industry, and were
widely used in the "Three Gorges Project", " South-to-north Water Transfer Project", "Olympic Venue Construction" and other key projects.
Benefiting from high technology and competition compared with similar foreign products, our welder have been exported to over 40 countries
such as Russia, Netherlands, Australia, Thailand, Malaysia, Brazil, South Africa, Israel, India and so on since 2003.
2
TIME WELDER FAMOUS BRAND OF CHINA
Overview
Technology, Industry and export are the lifeblood of TIME Group Inc.
Self Design Cooperation Creativity

3
Qualification
4
TIME course
of development
2015 Intelligent plant initially completed.
2013 TD series digital welders batch into the market.
TIME welding industrial park with annual output of 300,000

units built and put into use
2010 TIME welding robots debut in 2010 Essen Welding Show which
got the market and user's attention.
2008 Passed Environmental Management System (ISO14001:

2004) and Occupational Health and Safety Management
System (OHSMS18001: 2001) certification
2007 TIME welding laboratory established to provide users

comprehensive welding technology. Jinan Times New ERA
Technology Co., Ltd established.
2006 Beijing Time Technologies Co., Ltd. listed on the Shenzhen

Stock Exchange and the successful implementation of target
placement
2002 TIME large CNC cutting machines and automatic welding

equipment launched. TIME welders with DSP digital control
technology developed, enhancing technology of TIME welder
2001 TIME Group founded Beijing Time Technologies Co., Ltd

which cooperated with several shareholders (Lenovo Group,
Tsinghua unisplendour, Daheng Group, Stone Group, etc.)
1995 First company passed ISO9001 quality system certification in

welding industry
1993 Started independent development, production and sales of

IGBT inverter welder
Our client
After development for over twenty years, TIME's equipments have been widely used in
the boiler pressure vessel, nuclearelectricity, thermal power generation, water conservancy,
shipbuilding, bridge, steel structure, wind power generation andother industries. We have
clients all over the world, and TIME products play important roles in many giant projects.
Steel structure Oil and natural

industry gas industry
Electric power
construction Water conservancy and
hydroelectricity industry
Engineering
machinery
Wind Petrochemical
power generation industry Bridge engineering
Metallurgy Shipping industry
The container The automotive Transport

industry industry machinery
Machine Gas industry

South-to-north manufacturing
water diversion industry
Quality testing
High temperature test
EMC Test
Raining test
Dust test
Tension test
Impact test
PRODUCT CONTENTS
Welding Power Source

A Common Industrial Welding Machine 01
TD-Series Whole Digital Welding
Machine 29
　　　
TIME Arc Welding

B
Robot System 37
Auto-Welding and CNC Cutting

C Equipment 　　　 41
Sheet of Available Metal Materials

Product Type Carbon steel Stainless steel Aluminum and alloy Magnesium and alloy Copper and alloy Cast iron
Manual DC Arc Welding Machine ★ ★ ★ ★ ★ ★

DC TIG/MMA Welding Machine ★ ★ ★ ★
AC/DC Pulse TIG/
MMA Square Wave Welding Machine ★ ★ ★ ★ ★ ★
DC Pulse-TIG/ ★ ★
★ ★
MMA Welding Machine
Semi-automatic Gas Shielded ★ ★ ★ ★
(CO2/MIG/MAG) Welding Machine ★
Semi-automatic Gas Shielded
★ ★ ★ ★ ★ ★
(CO2/PMIG/PMAG) Welding Machine
Air Plasma Arc Cutting Machine ★ ★ ★ ★
Automatic Submerged Arc
★ ★ ★ ★
Welding Machine
Welding Equipment ★ ★ ★ ★ ★ ★
Longitudinal Seam Welding Machine ★ ★ ★ ★ ★ ★
CNC Cutting Machine ★ ★ ★ ★
The pictures in this book are only for reference. The objects will apply for ordering. Any modification to the specification, design and
configuration will not be informed in advance.
Unique Multi-Voltage Technology
● The welding machines made by TIME can be used in different countries with different input power.
● Almost welding machines are with input power: 3 phase 380V.
● The welding machines with input power 3 phase 220v, 3 phase 415v, 3 phase 440V even 3 phase
460 can be customized.
The welding machines with different input power are listed below to choose.
1.The welding machines with input power single phase 220V
Model Company type Power input Welding Mode Details in page
TAZ2100 　 single phase 220V MMA Page 3
WSM-200 PNE20-200P single phase 220V TIG Pulse/MMA Page 12
2.The welding machines with input power 3 phase 220V
ZX7-400 PE60-400 3 phase 220V MMA Page 4
ZX7-400 PE60-400E 3 phase 220V MMA Page 4
ZX7-400 PE60-400F 3 phase 220V MMA Page 4
NB-500 A160-500B/BC/R 3 phase 220V MIG/MAG Page 19
MZ-1000 A310-1000 3 phase 220V SAW Page 27
3.The welding machines with input power (Multi-voltage)
single phase
TAZ1600 　 MMA Page 3
220V/110V
TDN-5000K 3 phase 220V/440V MIG/MAG Page 32

Common Industrial
Welding Machine
Features:
● Most mature competitive industrial inverter welding
machine with 25 years experience in China
● Welding performance is recognized by the industry
experts
● Soft switch technology, international energy-saving
products with "energy star" title
Application:
● For the user who is in the field of steel structure,
coal, shipbuilding, machinery manufacturing etc.
heavy industry
● Petrochemical, hydropower, thermal power and so
on on-site construction industry
● Preferred brand for vocational colleges
Specialized Industrial welder
1
ZX7
Manual DC Arc Welding
Machine
Suitable for Welding: carbon steel, stainless steel, cast iron,
copper, titanium and other metals
Air carbon arc gouging
Main features
IGBT inverter technology Table of Welding machine model and the electrode diameter
Arc ignition with high success rate Electrode diameter
Model (recommend)
Simple TIG
TAZ 1600/2100 φ1.6~φ3.2
Wide range of power supply
ZX7-400 φ3.2~φ5.0
Stable arc, molten pool is easy to control ZX7-500 φ5.0~φ6.0
Small splash, electrode non-stick ZX7-630 φ5.0~φ6.0
Arc force current adjustable to ensure the
best performance Remote controller
Arc current adjustable to ensure the best Type of Remote
performance controller Welding machine suitable
Electrode rod with acid, basic, alkali, heat H028 PE60-400、PE60-500
resistant steel and so on can be used.
RC-6 PE61-315、PE61-400、PE61-500
Digital display meter for current to accurate
preset welding current before welding RC-9 PE61-315、PE61-400、PE61-500
Selection Tip
TAZ 1600/2100 Portable ZX7-630(PE52-630) Special for air carbon arc
gouging
ZX7-400(PE60-400) Over 200 m long welding 6/4×ZX7-400/500 Save space
cable can be used
ZX7-400(PE60-400E) Cellulose welding ZX7-400(PE60-3×400) Suitable for narrow space
ZX7-400(PE60-400F) S u i t a b l e t o u s e w i t h ZX7-315(PE61-315) Whole digital welding

generator machine
ZX7-500(PE60-500S) Over 200 m long welding ZX7-400(PE61-400) Whole digital welding
cable can be used machine
ZX7-500(PE50-500) Metal case ZX7-500(PE61-500) Whole digital welding
machine
ZX7-630(PE60-630S) MMA and air carbon arc
gouging
2
Manual DC Arc Welding Machine
Standard outfits
Accessories Code TAZ1600 TAZ2100

Fast plug red 7509000160 ● ●
Fast plug black 7509000160 ● ●
●stand for available
TAZ 1600/2100
Technical Specifications
Model TAZ1600 TAZ2100

Rated input voltage(V) AC220V±10% / AC110V±10% AC220V±10% 50~60Hz
Rated input current (A) 22 / 23 32
No-load voltage (V) 63 63
Output current adjusting range(A) 30～160 / 30～100 30～210
Duty cycle (40℃) 35% / 50% 35%

Efficiency 85% 85%
Insulation grade H H
Case protection grade IP21 IP21
Cooling Wind Wind
Dimensions (mm) 325×180×280 325×180×280
Net weight (kg) 5 5
Description Dual power input adaptive
3
Standard outfits
Accessories Code PE60-400 PE60-400E PE60-400F
300A Electrode holder 7857030000 ● ● ●
400A Earth clamp 7858040000 ● ● ●
Fast plug red 7500070011 ● ● ●
Fast plug black 7500070010 ● ● ●
● stand for available
MMA
1 1
0 0
CURRENT A
ZX7-400(PE60-400/E/F)
Model ZX7-400 ZX7-400 ZX7-400

Company type PE60-400 PE60-400E PE60-400F
Rated input voltage(V) 3 phase 380V±(15-20)% 50~60Hz
Rated input current (A) 26 26 26
Rated Input capacity (KW) 14.4 14.4 14.4
No-load voltage (V) 76±5% 76±5% 76±5%
Output current adjusting range(A) 25～400 25～400 25～400
Arc force adjusting range(A) 0～200 0～200 0～200
Ignition current adjusting range(A) 0～200 0～200 0～200
Carbon rod Φ4.0-Φ6.0 Φ4.0-Φ6.0 Φ4.0-Φ6.0
Duty cycle (40℃) 60% 60% 60%
Power factor(cosΦ) ≥85% ≥85% ≥85%
Efficiency (η) 0.93 0.93 0.93
Insulation grade F F F
Case protection grade IP23S IP23S IP23S
Cooling Wind Wind Wind
Dimensions (mm) 560×300×530 560×300×530 560×300×530
Net weight (kg) 33 33 33
Plastic case;
Wireless / wire remote controller is optional;
Modular design;
Description MMA / gouging(400A);
PE60-400E : Cellulose welding;
PE60-400F : Used with generator
Input power : 3 phase 220V is optional
4
Standard outfits
Accessories Code PE50-500 PE60-500S PE60-630S PE52-630
300A Electrode holder 7857030000 ● ●
400A Earth clamp 7858040000 ● ●
Fast plug red 7500070011 ● ●
Fast plug black 7500070010 ● ●
500A Earth clamp 7858050000 ● ●
BendingTerminal(KDZ 120B) 7530120010 ●
MMA
Alarm1 Alarm2 Power

Gouging
Voltage V
Off On
Short
Mid
Long
Current A Arc Length
Arc Current Arc Force Switch
ZX7-500(PE60-500S) ZX7-630(PE52-630)
Model ZX7-500 ZX7-630
Company type PE50-500 PE60-500S PE60-630S PE52-630
Rated input voltage(V) 3 phase 380V±15% 50~60Hz 3 phase 380V±15% 50~60Hz
Rated input current (A) 41 41 55.7 50
Rated Input capacity (KW) 23 23 34.6 33
No-load voltage (V) 68±5% 76±5% 76±5% 83±5%
Output current adjustingrange(A) 30~500 30~500 50~630 50~630
Arc force adjusting range(A) 0~400 0~400 0~200 -
Ignition current adjusting range(A) 0~200 0~200 0~400 -
Carbon rod Φ4.0 -Φ8.0 Φ4.0-Φ14 Φ4-Φ16
Duty cycle (40℃) 60% 35% 35% 100%
Power factor(cosΦ) 85% 85% 88% 85%
Efficiency (η) 0.93 0.93 0.93
Case protection grade IP21S IP23S IP23S IP23
Dimensions (mm) 700×360×700 660×300×530 700×360×700 700×360×783
Net weight (kg) 53 50 57 75
Metal case； Plastic case MMA/ air carbon arc gouging ; Air carbon arc
Wired remote control Wire remote controller is Air carbon arc gouging with high gouging with high
is optional； optional； efficiency; efficiency;
Description Weldig cable can be Welding cable can be Wheel is optional; Duty cycle 100%;
lengthened lengthened; Wire remote controller is optional MMA/GOUGING
Cellulose welding is
optional
5
Container Type Welding Machine
Main features
6 sets or 4 sets of ZX7-400/500, WS-400 install centralized in
one container
Excellent shape, cables are tidy
Easy to arc striking. Arc is stable. Good welding seam
Container with lock, it is convenient to manage
The container’s ventilation is good due to the persian blinds
structure on its sides except the door and it is waterproof
The covers can be opened with angle adjustable
Welding cable leads from the bottom of the power so the power
structure is simple and easy to connect
The remote control socket is placed in one side of the container
so it is tidy
Suitable for shipyard and other field environment, installation
convenient and easy to manage
400A Welding Machine
ITEM Container with 4 sets of welding machine Container with 6 sets of welding machine
Input voltage（V） 3 phase 380V±15% 50~60Hz 3 phase 380V±15% 50~60Hz
Rated input power (KW) 56 87
Dimension (L* W * H) (mm) 1070×720×1640 1430×750×1640
Container body net weight (kg) 125 195
Total weight (kg) 281 429
500A Welding Machine

ITEM Container with 4 sets of welding machine Container with 6 sets of welding machine
Input voltage（V） 3 phase 380V±15% 50~60Hz 3 phase 380V±15% 50~60Hz
Rated input power (KW) 92 130
Dimension (L* W * H) (mm) 1070×750×1980 1430×750×1980
Container body net weight (kg) 150 220
Total weight (kg) 360 530
Triple welding machine

Model ZX7-3X400 Duty cycle (40℃) 60%
Company type PE60-3X400
Power factor(cosΦ) 85%
3 phase 380V±(15~20)% Efficiency (η) 0.93
Rated input voltage(V)
50~60Hz
Insulation grade F
Rated input current (A) 3×28
Rated Input capacity (KW) 43 Case protection grade IP21S
No-load voltage (V) 76±5% Cooling Wind
Output current adjusting Dimensions (mm) 788×327×1056
30~400
range(A)
Arc force adjusting Net weight (kg) 120
0~200
range(A) It can be used
Ignition current adjusting as three welder
0~400 Description independence and
range(A)
500A electrode holder, widely used in the
outfits 400A earth clamp, field of shipbuilding
ZX7-3x400
bending terminal 6 pcs
6
Standard outfits
Accessories Code PE61-315 PE61-400 PE61-500
500A Electrode holder 7857050000 ●
400A Earth clamp 7858040000 ● ● ●
Fast plug (red) 7500070011 ● ● ●
Fast plug (black) 7500070010 ● ● ●
A/s
ZX7-315/400/500
Model ZX7-315 ZX7-400 ZX7-500
Company type PE61-315 PE61-400 PE61-500
Rated input voltage(V) 3 phase 266~456V 50~60Hz
Rated input current (A) 20 28 34
Rated Input capacity (KW) 12.1 17 23.5
No-load voltage (V) 60±5% 76±5% 76±5%
Output current adjusting range(A) 5~325 5~410 5~510
Arc force adjusting range(A) 0~150A/ms
Ignition current adjusting range(A) 15~315 15~400 15~500
Ignition time range(s) 0.01~1
Ignition voltage adjusting range(v) 20~80
Duty cycle (40℃) 60%
Efficiency 85%
Power factor 0.93
Insulation grade F
Case protection grade IP23S
Cooling Wind
Dimensions (mm) 560×300×530 560×300×530 660×300×530
Plastic case;
DSP technology;
RS-485 communication socket match RC-6,RC-7 remote controller;
Description Simple TIG;
Realization of remote setting and supervision by TIME TWPM
Cellulose welding
welding process management system
7
DC TIG/MMA Welding Machine
Suitable for welding various of metals except for Al, Mg and its
alloys，Including: carbon steel, stainless steel, cast iron, copper,
titanium and other metals
Main features
WS
IGBT inverter technology Remote controller
Good product consistency
Type of Remote controller Welding machine suitable
H028 PNE60-400、PNE60-500
With a variety of TIG operation mode
PNE60-500、PNE61-315、
High frequency arc ignition, welding RC-6
penetration well PNE61-400、PNE61-500
Performance stable, strong anti- RC-8A PNE60-400
interference ability PNE60-500、PNE61-400、
RC-9
Thermal design is reasonable to PNE61-500
protect the machine perfectly
Digital display meter for current to
accurate preset welding current before
welding
With MMA function (200A above
model)
The welding cables 2can be lengthened
to 50~100M/50mm
Selection Tip
WS-400(PNE60-400) Over 200m length welding cable can be used in MMA
WS-400(PNE60-400E) Cellulose welding
WS-400(PNE60-400F) Suitable to use with generator
WS-400(PNE61-400) Whole digital welding machine
WS-500(PNE61-500) Whole digital welding machine
8
Standard outfits
Accessories Code PNE60-400 PNE60-400E PNE60-400F
WP-26 TIG torch 7852002600 ● ● ●
300A electrode holder 7857030000 ● ● ●
400A earth clamp 7858040000 ● ● ●
Fast plug red 7500070011 ● ● ●
Fast plug black 7500070010 ● ● ●
2T MMA
1 1 1 1
0 0 0 0
4T TIG
CURRENT A
WS-400
Model WS-400 WS-400 WS-400
Company type PNE60-400 PNE60-400E PNE60-400F
Rated input voltage(V) 3 phase 380V±15% 50~60Hz 3 phase 380V±15% 50~60Hz 3 phase 380V±20% 50~60Hz
No-load voltage (V) 76±5% 76±5% 76±5%
Output current adjusting
15~400 15~400 15~400
range(A)
Slope up time (s) 0~10 0~10 0~10
Slope down time (s) 0~10 0~10 0~10
Pre-flow time (s) 0.5 0.5 0.5
Post-flow time (s) 5,10,15,30 adjustable 5,10,15,30 adjustable 5,10,15,30 adjustable
Ignition time (s) 0.05, 0.1, 0.2, 0.5 adjustable 0.05, 0.1, 0.2, 0.5 adjustable 0.05, 0.1, 0.2, 0.5 adjustable
Duty cycle (40℃) 60% 60% 60%
Efficiency 85% 85% 85%
Power factor 0.93 0.93 0.93
Case protection grade IP21S IP21S IP21S
Dimensions (mm) 560×300×530 560×300×530 560×300×530
Net weight (kg) 34 / 35 / 34 34 / 35 / 34 34 / 35 / 34
Plastic case;
Wireless/wire remote controller is optional;
Modular design;
Description Output current, high stability;
Ignition success rate 100%, it is suitable for auto-welding.
PNE60-400E：Cellulose welding
PNE60-400F：Used with generator
9
Standard outfits
Accessories Code PNE61-400 PNE61-500
WP-26 TIG torch 7852002600 ● ●
400A Earth clamp 7858040000 ● ●
Fast plug (DKJ50-70) (red) 7500070011 ●
Fast plug (DKJ50-70) (black) 7500070010 ●
Fast plug (DKJ70-95) (red) 7500095011 ●
Fast plug (DKJ70-95) (black) 7500095010 ●
A/s
WS-400/500
Model WS-400 WS-500
Company type PNE61-400 PNE61-500
Rated input voltage(V) 3 Phase 266~456V 50~60Hz
Rated Input capacity (KW) 17 23.5
No-load voltage (V) 76±5% 78±5%
Output current adjusting
5~410 5~510
range(A)
Slope up time (s) 0.1~99.9
Slope down time (s) 0.1~99.9
Pre-flow time (s) 0~13
Post-flow time (s) 0.1~50
Ignition time (s) 0.01~1s
Efficiency (η) 85%
Power factor(cosΦ) 0.93
Insulation grade F
Cooling Wind
Dimensions (mm) 560×300×530 660×300×530
Net weight (kg) 34 41
DSP technology;
Cellulose welding.
Description RS-485 communication socket match RC-6,RC-7 remote controller;
Realization of remote setting and supervision by TIME TWPM welding process management system
Plastic case， excellent shape
10
DC TIG/MMA Pulse Welding Machine
WSM
Suitable for Welding various of metals except for Al, Mg and its
alloys
Especially suitable for welding sheet metal or metal of strong
thermal sensitivity, welding quality is excellent.
Main features
IGBT inverter technology Remote controller
Wide range of power supply Type of Remote controller Welding machine suitable
Good product consistency RC-6 PNE61-400P
Pulse frequency is adjustable RC-9 PNE61-400P
With variety of TIG operation mode
High frequency arc ignition, welding penetration well
Performance stable, strong anti-interference ability
Thermal design is reasonable to protect the machine perfectly
Digital display meter for current to accurate preset welding current before welding
With MMA function (200A above model)
Two TIG mode: DC TIG or Pulse TIG
The welding cables can be lengthened to 50~100M/50mm2
Selection Tip
WSM-200(PNE20-200P) Compact, portable
WSM-200(PNE30-200P) Compact, portable, Power input: 3 phase 380V
WSM-315(PNE61-315P) Whole digital Pulse TIG welding machin
WSM-400(PNE61-400P) Whole digital Pulse TIG welding machine
11
Standard outfits
Accessories Code PNE20-200P PNE30-200P
WP-17 TIG torch 7852017035 ● ●
400A Earth clamp 7858040000 ● ●
Fast plug (K6B) red 7500006010 ● ●
Fast plug (K6B) black 7500006011 ● ●
4 4
1 2 3
1 2 3
0
0
4 4
1 2 3
1 2 3
0
0
WSM-200
Model WSM-200 WSM-200
Company type PNE20-200P PNE30-200P
Rated input voltage(V) Single phase 220v 50~60Hz 3 phase 380V 50~60Hz
Rated Input capacity (KW) 6.6 3.6
No-load voltage (V) 57±5% 54
Output current adjusting range(A) 5~200（TIG） 5~200（TIG）
Pulse frequency (Hz) 0.5~15 0.5~15
Thrust current range(A) 0~100A/ms 0~100A/ms
Slope up time (s) 0.1~99.9 0.1~99.9
Slope down time (s) 0.1~99.9 0.1~99.9
Spot time (s) 0.01~9.99 0.01~9.99
Pre-flow time (s) 0~13 0~13
Post-flow time (s) 0.1~50 0.1~50
Pulse ratio range 0.1%~99.9% 0.1%~99.9%
Duty cycle (40℃) 35% 35%
Power factor 0.93 0.93
Efficiency 85% 85%
Insulation grade F F
Case protection grade IP21S IP21S
Cooling Wind Wind
Dimensions (mm) 455×214×340 455×214×340
Widely used in the field of maintenance;

Description
Pointer type current meter
12
Standard outfits
Accessories Code PNE61-315P PNE61-400P
WP-26 TIG torch 7852002600 ● ●
400A Earth clamp 7858040000 ● ●
Fast plug (black) 7500070010 ● ●
Fast plug (red) 7500070011 ● ●
A/s/Hz/％
WSM-315/400
Model WSM-315 WSM-400
Company type PNE61-315P PNE61-400P
Rated input voltage(V) 3 phase 266~456V 50~60Hz
Rated Input capacity (KW) 17
No-load voltage (V) 60±5% 76±5%
Output current adjusting range(A) 5~315 5~410
Pulse frequency (Hz) 0.1~500
Thrust current range(MMA) 0~1500A/ms
Slope up time (s) 0.1~99.9
Slope down time (s) 0.1~99.9
Spot time (s) 0.01~9.99
Pre-flow time (s) 0~13
Post-flow time (s) 0.1~50
Pulse ratio range 0.1%~99%
Power factor 0.93
Efficiency 85%
Insulation grade F
Cooling Wind
Dimensions (mm) 560×300×530
Net weight (kg) 34
DSP digital welding machine;
Description RS-485 communication socket match RC-6,RC-7 remote controller;
Plastic case， excellent shape
13
AC/DC Pulse TIG/MMA Square Wave
WSE
Welding Machine
AC Square Wave TIG / Pulse TIG / DC TIG / MMA;
Suitable for welding of Al, Mg and its alloys, carbon steel,
stainless steel, cast iron, copper, titanium and other
metal
Main features
IGBT inverter technology
Microcomputer control technology
Welding parameter automatically stores
Five operating mode for AC Square wave TIG welding
Parameters in panel are set by coordinate-type touch key and the single knob for adjustment
Eight operating mode both for DC TIG, DC pulse TIG
AC Square Wave TIG / Pulse TIG / DC TIG / Spot TIG/MMA in this machine
Mainly be used for welding of aluminum, magnesium aluminum alloy and its alloys in the field of aviation,
aerospace, air separation equipment, radiator, aluminum pipe, bicycle, pressure vessel, furniture industry
and so on
Selection Tip
WSE-315(PNE30-315ADP) suitable to welding 0.5mm~18mm thickness aluminum alloy plate, double-sided
butt welding function, duty cycle 60%
butt welding function, duty cycle 100%
butt welding function, foot switch is optional
WSE-500(PNE31-500ADP) suitable to welding aluminum alloy plate with thickness below 25mm, double-
sided butt welding function, foot switch is optionalDuty cycle 100%
WSE-630(PNE30-630ADP) suitable to welding aluminum alloy plate with thickness below 35mm
14
AC/DC Pulse TIG/MMA Square Wave Welding Machine
Standard outfits
Accessories Code WSE-315 WSE-500 WSE-630
WP-18 TIG torch 7851018043 ●
WP-12 TIG torch 7851012041 ● ●
400A Earth clamp 7858040000 ●
500A Earth clamp 7858050000 ●
630A Earth clamp 7858063000 ●
Fast plug ( DKJ70) 7500070011/10 ●
Fast plug ( DKJ95) 7500095011/10 ●
OT terminal (OT50-10) 2PCS 7530050100 ●
WSE-315 OT terminal (OT35-8) 2PCS 7530035080 ●
OT terminal (OT95-10) 1PC 7530095101 ●
Bending terminal KDE120B 7530120010 ●
WSE-500/630
Model WSE-315 WSE-500 WSE-630
Company type PNE30/32-315ADP PNE30/31-500ADP PNE30-630ADP
Rated input voltage(V) 3 phase 380V±(15~20)% 50~60Hz
No-load voltage (V) 66±5% 76±6% 83±6%
Output current adjusting range(A) 12～315 12～510 20～630
Pulse frequency (Hz) 0.5～200
Pulse ratio range 10%～90%
Slope up time (s) 0～10
Slope down time (s) 0～10
Spot time (s) 0.2～5 0.2～5 0.2～5
Pre-flow time (s) 0.1～1.5
Post-flow time (s) 1～15
Surge current range(MMA) 0.01～0.5
AC frequency (Hz) 20～100 20～70
AC balance 10%～50%
Duty cycle (40℃) 60% / 100% 60% / 100% 60%
Efficiency ≥85%
Power factor 0.93
Insulation grade F
Cooling Wind
Net weight (kg) 63 68/72 72
Current output with Quasi sinusoidal waveform;
Welding cable can be lengthened to 60 meters (automatically alarm when the cable wings on welding
mode);
Description Double welding function is optional;
Foot switch is optional;
Current displays effective value in AC TIG mode;
Interface for the alarm function of water shortage
15
NB
Semi-Automatic Gas Shielded
(CO2/MIG/MAG) Welding Machine
It adopts waveform control technology for CO2/MIG/MAG function
Suitable for welding: carbon steel, stainless steel, Al,Mg and its
alloy with solid/flux cored wire
Main features
Welding operation mode is divided into 2 step and 4 step
Digital display of welding voltage, welding current
Wire feeding slowly to improve the success rate of arc ignition at welding start
Wire feeding mechanism is two driven wheels so wire feeding is stable
Arc ignition easy, arc crater function
Microcomputer control, performance is stable and reliable
It adopts waveform control to make welding process stable and little splash
Real-time waveform control for whole welding process to make the dynamic performance excellent
The welding voltage, wire feed speed and wire diameter and other functions can be preset
Selection Tip
NB-200(A150-200Y) Compact, Portable NB-500(A160-500A) Duty cycle 100%
NB-250(A150-250Y) Compact, Portable NB-500(A160-500B) MMA/MIG/MAG
NB-250(A160-250) Suitable for welding thin sheet NB-500(A160-500R) Use with robot
NB-350(A160-350S) Wire feeder is single driven NB-630(A160-630A) Duty cycle 100% (wind cooled or
NB-350(A160-350) Wire feeder is double driven water cooled is optional)
NB-400(A160-400) Wire feeder is double driven
NB-400(A160-400B) MMA/ MIG/MAG
NB-500(A160-500S) Wire feeder is double driven, suitable for welding wire Ф1.2
NB-500(A160-500) Wire feeder is double driven, mainly used for welding wire Ф1.2 and Ф1.6
16
Semi-Automatic Gas Shielded (CO2/MIG/MAG) Welding Machine
Standard outfits
Accessories Code A150-200Y A150-250Y
Welding torch MB15KD 7852050032 ● ●
35mm2 Earth cable 4 meter 7710000350 ● ●
400A Earth clamp 7858040000 ● ●
Fast plug ( DKJ35-50) (red) 7500050021 ● ●
Fast plug ( DKJ35-50) (black) 7500050020 ● ●
Plug for flow meter 7356000001 ● ●
5 6
4 7
3 8
2 9
1 10
5 6
4 7
3 8
2 9
1 10
5 6
4 7
3 8
2 9
1 10
NB-200(A150-200Y) NB-250(A150-250Y)
Model NB-200 NB-250
Company type A150-200Y A150-250Y
Rated input voltage single phase 220V±15% 50~60Hz 3~380V ±15% 50~60Hz
Rated input current（A） 29 14
Rated input power（KW） 4.3 6.6
Voltage adjusting range（V） 15 ~ 26 15 ~ 29
No-load voltage（V） 50 50
Current adjusting range（A） 50 ~ 200 50 ~ 250
Wire feed rate range（m/min） 15 ~ 16 18 ~ 20
Suitable welding wire Dia.（mm） Φ0.8/Φ1.0 （steel） Φ0.8/Φ1.0 （steel）
Suitable welding wire type solid solid
Duty cycle 60% 60%
Efficiency（η） 90% 90%
Power factor（cosΦ） 0.93 0.93
Insulation grade F F
Case protection grade IP21S IP21S
Dmiensions（mm） 500×273×500 500×273×500
Power source net weight（Kg） 24 27
Description The wire feeder is built-in. The wire feeder is built-in.
17
Standard outfits
Accessories Code A160-250 A160-350 / 350S A160-400 / 400B
Welding torch MB15KD 7852050032 ●
Welding torch MB36KD 7852050032 ● ●
35mm2 Earth cable 4 meter 7710000350 ●
50mm2 Earth cable 4 meter 7710000500 ● ●
400A Earth clamp 7858040000 ● ● ●
Fast plug ( DKJ35-50) (red) 7500050021 ●
Fast plug ( DKJ35-50) (black) 7500050020 ●
Fast plug ( DKJ50-70) (red) 7500070011 ● ●
Fast plug ( DKJ50-70) (black) 7500070010 ● ●
Plug for flow meter 7356000001 ● ● ●
NB-250/350/400
Model NB-250 NB-350 NB-400
Company type A160-250 A160-350/350S A160-400 / 400B
Rated input voltage(V) 3 phase 380V±10% 50~60Hz
Rated input current(A) 12.5 22 27
Rated input power(KW) 8.3 14.5 18
Voltage adjusting range(V) 15~30 15~40 15~40
No-load voltage(V) 46±5% 66±5% 66±5%
Current adjusting range(A) 20~250 20~350 20~400
Wire feeding speed range (m/min) 2~15 2~25 2~25
Suitable welding wire dia.(mm) Ф0.8/Ф1.0(Carbon steel) Ф0.8/Ф1.0/Ф1.2(steel) Ф0.8/Ф1.0Ф/1.2(Carbon steel)
Welding wire type Solid/flux-core
Duty cycle （40℃） 100％ 35％ / 60％ 60％
Efficiency 85％
Power factor 0.93
Insulation grade F
Case protection grade IP23 IP23S
Cooling Wind
Dimensions (mm) 500×300×530 560×300×530 560×300×530
Weight of power source (kg) 40 41
Weight of wire-feeder (kg) 9
Inching function for wire Strong adaptability of dry extension of electrode change；
feeding；Welding cable can The comprehensive cable is 50mm2 wire；
be lengthened to 30M;The Plastic case, humanized design
Description comprehensive cable is 35mm2 A160-350s: Wire feeder sigle driven and duty cycle 35%
wire；wire feeder is double A160-350:Wire feeder double driven and duty cycle 60%
driven A160-400:Wire feeder double driven
A160-400B:Wire feeder double driven and MMA function
18
Standard outfits
A160-500B/
Accessories Code A160-500S A160-500 A160-500A
A160-500R
Welding torch MB40KD 7852050032 ● ● ● ●
60mm2 Earth cable 4 meter 7710000600 ● ● ● ●
500A Earth clamp 7858050000 ● ● ● ●
Bendig Terminal（KDZ95B） 7532950000 ● ● ● ●
Plug for flow meter 7356000001 ● ● ● ●
NB-500
Model NB-500
Company type A160-500S A160-500 / A A160-500B/BC/R
Rated input voltage(V) 3 phase 380V±10% 50~60Hz
Rated input current(A) 34
Rated input power(KW) 25 23 23
Voltage adjusting range(V) 15~45
No-load voltage(V) 64±5% 76±5% 73±5%
Current adjusting range(A) 30~500 30~500 30~500
Wire feeding speed range (m/min) 2~22 2~25 2~22
Φ0.8/Φ1.0/Φ1.2 Φ1.0/Φ1.2/Φ1.6 Φ1.0/Φ1.2/Φ1.6
Suitable welding wire dia.(mm)
（Carbon steel）（Carbon steel）（Carbon steel）
Welding wire type Solid/flux-core
Duty cycle （40℃） 60% (25℃) 60% / 100% 60%
Efficiency 85%
Power factor 0.93
Insulation grade F
Cooling Wind
Weight of power source (kg) 45 49 49
Weight of wire-feeder (kg) 9
The comprehensive cable is 60mm2 Strong adaptability of wire extension Wire feeding inching function;
wire change; The comprehensive cable is 60mm2
Welding cable can be lengthened to Welding cable can be lengthened to wire;
50 meter; 50 meter; Wire feeder is double driven;
wire feeder is double driven； The comprehensive cable is 60mm2 Welding cable can be lengthened to
Strong adaptability of wire extension wire; 50 meter ;
change Wire feeder is double driven A160-500B:MMA function and its
Description A160-500A：Duty cycle 100% arc force current and ignition current
is adjustable;
Strong adaptability of wire extension
change;
Power input :3 phase 220v is
optional
A160-500R:can be equipped with
welding robot
19
Standard outfits
Accessories Code A160-630A
Welding torch MB40KD 7852050032 ●
70mm2 Earth cable 4 meter 7710000700 ●
500A Earth clamp 7858063000 ●
Bendig termi（KDZ120B） 7530120010 ●
Plug for flow meter 7356000001 ●
NB-630
Model NB-630
Company type A160-630A
Rated input voltage(V) 3 phase 380V ±（15~20）% 50 ~ 60Hz
Rated input power(KW) 40

No-load voltage(V) 73±5%
Duty cycle （40℃） 100%
Current adjusting range(A) 100~630
Suitable welding wire dia.(mm) Φ1.0/Φ1.2/Φ1.6 (Carbon steel) solid wire
Efficiency 85%
Power factor 0.93
Insulation grade F
Case protection grade IP23
Cooling Wind
Weight of power source (kg) 82
The comprehensive cable is 70mm2 wire;
Wire feeder is double driven;
Description Wire feeding inching function;
Welding cable can be lengthened to 50 meter;
Wind cooling or water cooling
20
ⅠWire feeder (optional)
Double driven wire feeder Single driven wire feeder
ⅡWire feeder SB-10F-1(optional)
Voltage for wire feeding DC24V DC18.3V
Rated current 5A/5.5A
Wire feeding speed 1.5-18 m / min
Dia. of wire Φ0.8-Φ1.6mm Solid/flux-cored
20kg
Load capacity of wire
Ф300 ×Ф50 × 103mm
Dimensions 635 × 250 × 390mm
Weight 15kg SB-10F-1
ⅢLight CO 2/MIG/MAG wire feeder tractor

Input voltage of the travel mechanism (V) DC 110V (SERVO MOTOR)
Input current of the travel mechanism (A) 0.4
Input voltage of the wire feeding mechanism (V) DC18.3/DC24 （Printed motor）
Input current of the wire feeding mechanism (A) 5/5.5
Wire feeding mothod Continuous
Welding speed range (m/min) 0.2~2.2
Wire feeding speed range (m/min) 1.5~15/1.5~20
Suitable for rated welding current (A) 500
Application of wire diameter (mm) 1.0/1.2/1.6/2.0
Welding wire type Solid/flux-cored wire
Welding torch swing angle. ±90°
Deflection angle of torch ±45°
50×60 (longitudinal * transverse) (not
Distance adjustable for Torch
including coarse adjustment)
Wire spools capacity (kg) 20
Dimension (L×W×H)(mm) 480×480×680
Weight(Kg) 32 FD60-500NB
21
Mobile Cartridge Welding Fume Extractors
Main features
● Adopt barrel type filter with high filtration efficiency (up to 99.9%), filter area is large (15m2),
filter replacement cycle longer and the replacement cost lower
● Small volume, it is with four foot wheels so as to move easily
● With flexible arm which can rotate 360° so as to absorb dust from the source
● Suitable for MIG/MAG welding, SAW welding, TIG welding, MMA and so on
● Energy saving, low power, strong suction, low noise
TA-001 TA-002 TA-003
Model TA-001 TA-002 TA-003
Air flow rate 1200m3 / hour 1200m3 / hour 1200m3 / hour
Filtration >99.9% (welding fume) >99.9% (welding fume) >99.9% (welding fume)
efficiency
Motor power 0.75kw 0.75kw 0.75kw
Filter easy to clean and replace easy to clean and replace easy to clean and replace
Dimension 610×520×1020 550×1030×560 1000×580×560

（mm）
Power supply 220V 50Hz 220V 50Hz 220V 50Hz
Filter replacement cycle is long and Filter replacement cycle is long and it Filter replacement cycle is long and
it is about 2-3 years to replace is about 4 years to replace according it is about 2-3 years to replace
according to 8 workhours a day. to 8 workhours a day. according to 8 workhours a day.
Description
Cleaning valve connects to the Cleaning valve connects to the
compression air to clean conveniently. compression air to clean conveniently.
22
LGK
Air Plasma Cutting Machine
Suitable for cutting carbon steel, stainless steel, copper,
aluminum and other metals
Main features
Inverter technology
High efficiency and energy saving
Cutting current can be adjusted continuously
Post gas function
Suitable for large CNC cutting machine
Neat incision, smooth without polishing
High successful rate of arc ignition, performance stable
Selection Tip
TDL 600/800/1000/1200 Intelligent digital plasma cutting machine
LGK-200(PG10-200) High frequency arc striking, suitable for cutting sheet (Thickness below 50mm)
LGK-200(PG20-200) Precision plasma cutting machine
LGK-400(PG20-400) Precision plasma cutting machine
23
Standard outfits
Accessories Code TDL 600 TDL 800 TDL 1000 TDL 1200
SC120 cutting gun （6m） 7854SC1200 ●
P-80-LF cutting gun （5m） 78520P8050 ● ● ●
16mm2 cable (4 m) 7710000160 ● ●
25mm2 cable (4 m) 7710000250 ● ●
Φ8 oxygen tube (3 m) 7813000080 ● ● ● ●
400A Earth clamp 7858040000 ● ● ● ●
Fast plug ( DKJ16-1) (black) 750DKJ1010 ● ● ● ●
Filter pressure reducing valve
7358200000 ● ● ● ●
AFR2000-0.5\8BA
TDL 600/800/1000/12000
Model TDL 600 TDL 800 TDL 1000 TDL 1200
Rated input voltage Three-phase AC 380V±15% 50/60Hz
Rated input current (A) 9.8A 13.4A 22.4A 29.4A
Rated input powerb（kw） 6.5 9 13.8 17.7
Rated output capacity (X=60%) 60A/104V 80A/112V 100A/120V 120A/128V
Rated no-load voltage (V) 307±5% 307±5%
Rated no-load current (A) ＜1
Energy efficiency grade Grade 2
Power factor (COSφ) 0.89 0.89 0.90 0.91
Efficiency (η) 90% 90% 90% 90%

0
Rated duty cycle(40 C) 60% 60% 60% 60% / 100%
insulation grade F
Case Protection Class IP23S
Output current (A) 20 ～ 60 25 ～ 80 30 ～ 100 30 ～ 120
Arc striking current (A) Non high frequency
Maximum cutting through thickness (mm) 35 40 45 50
Quality cutting(mm)(Carbon steel) 20 25 30 35
Quality cutting (mm)(Stainless steel) 15 20 25 30
Piercing cutting thickness (mm) 10 12 15 20
Dimension (L×W×G)(mm) 592×290×503 650×326×567
24
Standard outfits
Accessories Code PG10-200 PG20-200 PG20-400
SC120 cutting gun （6m） 7854SC1200 ● ● ●
25mm2 cable (3 m) 7710000250 ● ● ●
Φ8 oxygen tube (3 m) 7813000080 ● ● ●
500A Earth clamp 7858050000 ● ● ●
Fast plug (black) 750DKJ5010 ● ● ●
LGK-200
Model LGK-200 LGK-200 LGK-400
Company Type PG10-200 PG20-200 PG20-400
input voltage 3 phase 380V±10% 50~60Hz 3 phase 380V±10% 3 phase 380V±10%
Rated input power(KW) 37.5 37.5 75
No-load voltage (V) 280 280 280
Current adjustment range(A) 40～200 40-200 40-400
Rated output voltage (V) 150 150 150
Rated duty cycle（40℃） 100% 100% 100%
Efficiency 85%
Power factor 0.93
Maximum cutting through
64 64 100
thickness (mm)
Quality cutting thickness
50 50 80
（mm）
insulation grade F
Case Protection Class IP21
Cooling Wind
Dimension (L×W×G)(mm) 1130×670×905 1130×670×905 （1130×670×905）×2
weight (kg) 480 480 960
Gas flow (L/min) 40～200 40～200 40～200
Water-cooled cutting gun: Gas Controller uses touch screen,Expert database integrated ;
handheld / used for CNC Multi gas control technology to cut the stainless steel without Oxygen
Description
machine;Applicable for cutting so as to save money.
plate
25
MZ
Automatic Submerged Arc
Welding Machine
Suitable for welding carbon steel, stainless steel and other metal
Suitable for surfacing, MIG (thick wire), carbon arc gouging
Main features
Welding current, welding voltage and the velocity of trolley can be preset and displayed digitally.
The tractor’s mechanical adjustment is convenient. The tractor moves stable to adapt a variety of
working conditions
Arc ignition/arc withdraw adopt automatic ‘retracting’ control
MMA and air carbon arc gouging
Welding thickness is not less than 3mm
Model of tractor
Variety of tractor is optional. tractor for flat
FD10/11/12/13-200TS position welding FD13-150T tractor for fillet
and fillet welding welding
in the flat position
FD10/11/12/13-200TZ tractor for flat tractor for
position welding FD11/12-200TU surfacing
FD10/11/12/13-200TQ Light duty tractor FD21/22-200T tractor with
digital control
FD10/11/12-200TH heavy duty tractor
Selection Tip
MZ-630 (A310-630) Suitable for welding sheet (Thickness more than 3mm)
MZ-800 (A310-800) Suitable for welding plate (Thickness more than 5mm)
Z type machine can also be used for carbon arc gouging if the user outfits the
wire feeding system by self
A311-1000 / A311-1250 is digital submerged arc welding machine
26
Automatic Submerged Arc Welding Machine
Standard outfits
A310-1000/ A310-1250/
A310-630 A310-800
Accessories Code A311-1000 A311-1250
1pc 95mm2 cable (5m) 24H0820050 ● ●
2pcs 70mm2 cable (5m) 24H1020050 ● ●
1pc 95mm2 cable (15m) 24H0820150 ● ●
2pcs 70mm2 cable (15m) 24H1020150 ● ●
15m control cable 24H082A150 ● ● ● ●
1pc tractor 1131H10212 ● ● ● ●
MZ-630/800/1000/1250
Model MZ-630 MZ-800 MZ-1000 MZ-1250
Company type A310-630 A310-800 A310-1000/A311-1000 A310-1250/A311-1250
Input voltage 3 phase 380V±(15%-20%) 50~60Hz
Rated input current(A) 50 64 80 100
Rated input power(kw) 33 42 52 65
Current adjusting range(A) 120~630 150~800 150~1000 150~1250
Duty cycle(40℃) 100% 100% 100% 60% / 100%
Welding tractor travel speed range(m/h) 6~72
Wire feeding rate range(m/min) 1~6.5 0.5~2.5 0.5~2.5 0.5~2.5
Suitable welding wire dia.(mm) φ1.6~φ2.4 φ3.2~φ5.0 φ3.2~φ5.0 φ3.2~φ5.0
Efficiency 92%
Power factor 0.92
Insulation grade F
Case protection grade IP23
Cooling mode Wind
Dimensions of power source (mm) 810×345×1022
Net weight of power source (kg) 90 90 98 98
Dimensions of welding tractor (mm) 1038×480×628
Net weight of welding tractor (kg) 51
Z Type machine: PS10- Z Type machine: PS10-
1000Z 1000Z
It can be used for SAW It can be used for SAW
welding and surfacing and welding and surfacing
Description Suitable for sheet Suitable for sheet carbon arc gouging if the and carbon arc gouging
welding welding
user outfits the wire feeding if the user outfits the wire
system by self feeding system by self
A310-1000 : Power input
3 phase 220V is optional
27
Automatic submerged arc welding tractor
FD13-150T submerged arc welding fillet tractor

Welding gun with special hose, the welding seam of straight and larger
curvature radius can be done by the gun through the spring of the gun.
Welding speed range: 15m/h ~ 98m/h.
Wire feeding speed range: 0.9m/min ~ 6.3m/min.
Wire diameter range: Ф1.6 ~ Ф2.5
Four wheel drive for tractor to move smoothy.
Press the wire elastic so as to ensure wire feeding stable.
Guide rod is optional to realize the profiling welding.
FD13-150T
Mainly used in crane industry, container truck, steel structure industry etc.
FD10/11/12-200TS welding tractor

Welding speed range: 15m/h ~ 98m/h.
Wire feed speed range: 0.9m/min ~ 2m/min.
Wire diameter range : 2.4 ~4.0mm (FD10);
3 ~5.0mm (FD11);
3 ~6.0mm (FD12);
Four wheel drive for tractor to improve the stability of walking.
Column hinge is optional to realize the column tilted about to meet the
requirements of fillet welding in the downhand position.
Welding head can be adjusted by six degree freedom conveniently.
Tapered wire feeding gear makes that wire feeding is stable and reliable
and effectively reduce the load of the motor.
Press the wire elastic so as to ensure wire feeding stable.
FD10/11/12-200TS
The wire disc is open or closed.
The length of the beam has a variety of options.
Contract tip: straight type(standard), roller type.
Clip type, narrow gap type.
Rail: heavy rail (standard outfits), light rail.
FD10/11/12-200TQ light submerged arc welding tractor
Compact size. It is used to weld the cylinder ring which diameter is larger than
800mm and the cylinder longitudinal seam which diameter greater than 600mm.
Combined cone wire feeding gear makes wire feeding stability and reliability and
improve the service life of the wire feed wheel for the welding of inner longitudinal seam
and inner ring seam of cylinder type workpiece.
FD10/11/12-200TQ
28
Digital intelligent
Welding Machine
Features:
● Three-core whole-digital control technology (man-machine
interface, motor control, process control)
● Excellent process performance, user experience improved
● Universal data transfer interface, easy to expand peripheral
functions and upgrade program by USB interface
● Digital management of welding site information
Application:
● Best choice for the welding workshop of large industrial
customers
● Essential equipment for intelligent welding plant
● For automatic welding equipment and arc welding
robot products
Intelligent welder
Perfect experience
29
TD
TD-Series Whole Digital
Welding Machine
Suitable for welding various of metals except for Al, Mg and its alloys
Main features
Intelligent power source (New model) by whole digital microprocessor control bases on the digital
platform of DSP (hardware main control circuit) and ARM (digital communication panel). It adopts
modular design concept and with characteristics of digital, intelligent, automation, network and
green to provide a new experience for the user. The welder can be upgraded conveniently and add
new functions by software without the hardware change.
Power input : 3 phase 220V is optional for all TD-Series welding machines.
JOB mode
Fault self-diagnosis
Extensible ports for automatic welding
Group control
Trolley optional
Selection Tip
TDW 4000/5000 Intelligent digital TIG welding machine
TDW 4000M/5000M/6000M Intelligent digital pulse TIG welding machine
TDN 3500 5000 6000 Intelligent digital MIG/MAG welding machine
TDN 3500B/Y 5000B/Y 6000B/Y Intelligent digital MIG/MAG welding machine
TDN 5000M Intelligent digital pulse MIG/MAG welding machine
TDN 3501M/5001M Intelligent digital pulse MIG/MAG welding machine
Welding Process Management(TWPM) Welding management software system
30
TDW-Series DC TIG/MMA Welding Machine
Main features
MMA, TIG, Pulse TIG
5A arc ignition and welding stably
HF ignition and Lift arc ignition
Dual-core digital control
11 kinds of welding operation mode
Remote control
Welding current: Welding current: I = 130A

I peak = 220A
I base = 50A
DC TIG/MMA TDW 4000 TDW 5000
Model
DC Pulse-TIG/MMA TDW 4000M TDW 5000M TDW 6000M
Rated input voltage (UI) (V) Three-phase AC
Rated input current (I1eff)(A) 22.0 34.9 43.5
Rated input power (kw) 17 23.5 33
Rated output MMA 400A/36V 500A/40V 630A/44V
capacity(X=60%) TIG 400A/26V 500A/30V 630A/34V
Rated no-load voltage (U0)(V) 76±5%
Rated no-load current (I0)(A) ＜1
Energy efficiency rating Grade 2
Cycle 10
Power factor (COSφ) ≥ 0.85
Efficiency (η) ≥ 85%
insulation grade F
Case protection Class IP23S
Rated duty cycle 60%
Arc striking current (A) 0 ～ 400 0 ～ 500 0 ～ 630
Thrust force (A/ms) 0 ～ 150
MMA
Welding current (A) 10 ～ 400 10 ～ 500 50 ～ 630
Arc striking time (s) 0.1 ～ 2
Welding current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Initial current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Maintain current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Secondary current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Slope up time (s) 0 ～ 10
Slope down time (s) 0 ～ 10
Pre-flow time (s) 0 ～ 10
TIG
Post-flow time (s) 0 ～ 25
TIG spot welding time 0.1 ～ 25
Spot welding current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Peak current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Base current (A) 5 ～ 400 5 ～ 500 20 ～ 630
Pulse Frequency (Hz) 0.1 ～ 500
Pulse duty cycle 0.1 ～ 99％
Dimensions (L×W×H)(mm) 610×290×503 650×320×567 650×340×614
31
TDN-Series Semi-Automatic Gas Shielded (CO2/MIG/MAG) Welding Machine
Main features
MMA, MIG/MAG, Single TIG
Three-cores digital control
Welding process expert database
Digital waveform control algorithm to reduce welding splash
Detail parameter setting to customize welding process
Wireless Remote control by mobile phone APP
(optional) Carbon steel I=135A

V=19.5V
Model TDN 3500 TDN 5000/K TDN 6000
Input voltage Three-phase AC 380V±15% 50/60Hz

Rated input current (A) 23.5 42.0 53.3
Rated input power (kW) 14 23.5 35
No-load voltage (V) 76±5%
No-load current (A) 0.7~0.9

No-load consumption (W) 300 300 350
Voltage adjustment range (V) 10~40 10~45 10~50
Current output range (A) 30~350 30~500 30~630
Spot Welding Time 0 ～ 10.0

Pre-flow time 0 ～ 10.0
Post-flow time 0 ～ 10.0

Type of wire Solid/flux core carbon steel and stainless steel
Wire diameter Φ0.8/Φ1.0/Φ1.2 Φ1.0/Φ1.2/Φ1.4/Φ1.6 Φ1.0/Φ1.2/Φ1.4/Φ1.6
Gas type CO2：100%；Ar(80%)+ CO2(20%); Ar(98%)+ CO2(2%)
　60%（350A，31.5V）　60%（500A，39V）　60%（630A，44V）

Duty cycle
100%（270A，27.5V） 100%（390A，33.5V） 100%（500A，39V）
Energy efficiency Grade 2
Case protection Class IP23

Insulation grade F
Cooling method Thermostat air cooling

Dimension (mm) 603×290×503 660×326×567 598×336×613
Weight (Kg) 35 48 60
Weight of wire feeder (Kg) 9 9 9

TDN 5000K: Input Power
Remark
3phase 220V/440V is optional
32
TDN B/Y Series Gas Shielded (CO2/MIG/MAG) Welding Machine
Main features
MMA, MIG/MAG, Single TIG
Digital waveform control algorithm to reduce welding splash
Detail parameter setting to customize welding process
Wireless Remote control by mobile phone APP
Carbon steel I=135A

V=19.5V
Model TDN 3500(B、Y)* TDN 5000(B、Y)* TDN 6000(B、Y)*
Input voltage Three-phase AC 380V±15% 50/60Hz
Rated input current (A) 23.5 42.0 53.3
Rated input power (kW) 14 23.5 35
No-load voltage (V) 76±5%
No-load current (A) 0.7~0.9
No-load consumption (W) 300 300 350
Voltage adjustment range (V) 10~40 10~45 10~50
Current output range (A) 30~350 30~500 30~630

Spot Welding Time 0 ～ 10.0
Pre-flow time 0 ～ 10.0
Post-flow time 0 ～ 10.0

Type of wire Solid/flux core carbon steel and stainless steel
Wire diameter Φ0.8/Φ1.0/Φ1.2 Φ1.0/Φ1.2/Φ1.4/Φ1.6 Φ1.0/Φ1.2/Φ1.4/Φ1.6

Gas type CO2：100%；Ar(80%)+ CO2(20%); Ar(98%)+ CO2(2%)
　60%（350A，31.5V）　60%（500A，39V）　60%（630A，44V）

Duty cycle
100%（270A，27.5V） 100%（390A，33.5V） 100%（500A，39V）
Energy efficiency Grade-2

Case Protection Class IP23
Insulation grade F
Cooling mothod Thermostat air cooling

Dimension (mm) 603×290×503 660×326×567 598×336×613
Weight of power source (Kg) 35 48 60

Weight of wire feeder (Kg) 11 11 11
Weight of water cooler (Kg) 21 21 21
Weight of trolley(Kg) 15 15 15
Note: B TYPE for LED Y TYPE for integrated machine including water cooler and trolley.
33
TDN Pulse MIG/MAG Welding Machine
Main features
MMA, Single TIG, MIG/MAG, Pulse MIG/MAG
Digital arc length control algorithm to ensure welding stability
MODBUS or DEVICENET digital communication interface
LCD operator panel wire feeder optional
Stainless steel I =140A V=21.5V
Aluminum I=160A V=23.8V
TDN 5000M
Model TDN 5000M carbon steel/stainless steel/

Material of wire
Aluminum magnesium alloy
Three-phase
Input voltage Welding mode MMA, Pulse-MIG/MAG
AC 380V±15% 50/60Hz
Rated input current(A) 42.0 Duty cycle 60％（500A/39V）
Rated input power (kW) 23.5 Efficiency (η) 80%~85%
No-load voltage (V) 76±5% Power factor λ= 0.7~ 0.9
No-load current (A) 0.7~0.9 Case Protection Class IP21
No-load consumption(W) 300 insulation grade F
Voltage adjustment range (V) 10~45 Cooling mothod Thermostat air cooling
Current output range (A) 30~500 Dimension of power source (mm) 660×326×567
Current output range for Dimension of wire feeder (mm) 670×240×405

30~500
MMA(A)
Weight of power source (Kg) 48
Type of wire Solid wire
Weight of wire feeder (Kg) 11
Wire diameter Φ1.0/Φ1.2/Φ1.6
34
TDN Pulse MIG/MAG Welding Machine
Main features
Digital DSP control and inverter technology
Professional welding process database and synergic operation
Easy to update by software
Can be controlled using an robot interface JOB mode
Functions: MIG/MAG, Pulse MIG/MAG, MMA, DC TIG, Carbon arc gouging
Operation mode: 2-step mode, 4-step mode
Digital display: wire feeding speed, current, voltage, base metals etc
Base metals: carbon steel, stainless steel, nickel base alloy, Al、Mg and its
alloy and some other special metals
Protection functions: undervoltage, overvoltage, under current, over-current,
overheat etc. （Basic outfits）（Optional）
Power source, wire feeder, water-cooler and trolley can be composed of TDN 3501M / 5001M
one machine
Model TDN 3501M TDN 5001M
Input voltage 3Phase, AC380V±15%, 50Hz/60Hz
Rated input current I1 (A) 30 47
Rated input power P1 (kW) 14.6 24.5
No-load voltage UO (V) 76±5 76±5
No-load current IO (A) 0.7~0.9 0.7~0.9
No-load consumption PL (W) 300 300
Voltage adjustable range U2 (V) 10~40 10~45
Current output range I2 (A) 30~350 30~500
Current adjustable range(MMA) (A) 30~350 30~500
* Suitable welding wire type Solid/Flux-cored welding wire
* Suitable welding wire dia.(mm) Φ0.8/Φ1.0/Φ1.2/Φ1.6
* Suitable welding wire material Carbon Steel / stainless steel / Al / AL, Mg alloy / AL, Si alloy / Cu, Si alloy
Welding methods Pulsed MIG / Pulsed MAG / MAG / CO2 / MMA（Lift TIG）
Duty cycle (X) 60％ (350A/34V) 60％ (500A/40V)
Efficiency (η) 80%~90% (Rated output conditions)
Power factor (λ) 0.7~ 0.9
Insulation grade (Y) F
Cooling method Thermal control wind cooling
Power source dimensions (L×W×H) (mm) 603×290×503 660×326×567
Weight of power source (kg) 35 48
35
TWPM Welding Process Management System
Features
Industrial equipment digital and information network is no longer a new topic. Network age has come in the
industry. The digital, network and intelligent TIME welding machine is no longer a mere production machine,
but part of digital welding site, to provide a new management tool for welding production manager, manager of
welding processes, welding equipment managers via acquisition, statistics and analysis of data during welding.
The TIME TWPM 3.0 (TIME Welding Process Management) is based on TIME welding machines, which combines
information technology and production management technology, to provide an effective means for production
management, quality management, cost management, equipment management for production manager, providing
an effective solution for digital management of welding site.
Advantages
Flexible networking:
Adhering to the principle of "Customer First", offer various centralized control solutions for welding equipments for
various welding sites and customer needs, including those based on RS485, which can control 64 devices centrally
with communication distance up to 100m; those based on industrial bus CAN-BUS, which can control 100 devices with
communication distance up to 500m; whose based on WIFI, which can control 100 devices with communication distance
up to 100m, and can be extended through a network relay; Android-based point-to-point control scheme and other
special networking.
Powerful data processing capabilities:

Single centralized control station for real-time data processing and historical data processing for 100 welding equipments, featuring
automatic disconnection reconnection and loss retransmission to ensure the accuracy and completeness of production data,
providing powerful data base for analysis of historical data.
Production management automation and networking:
Convenient shift scheduling, automated welding production management, paperless management of production scheduling; powerful
database management, data reporting queries within a local network, providing welding equipment work hours sheet and welder
work statements.
Professional quality management:
Process parameters management for 5 kinds of welding equipments and 9 kinds of operating mode, an expert database
established to meet the requirements of versatility and reusability of process parameters, eliminating complex and
duplicated work of welding process manager.
Rich friendly interface:
Optional English/Chinese display of various area, pleasant and friendly graphical software interface, intuitive and dynamic
UI, improving friendliness. Including clear status of all devices in the site, graphical editing of process parameters, while
viewing the work curves of eight devices.
36
TIME Arc Welding

Robot System
Through continuous exploration and research, TIME arc welding robot system
provides the users a comprehensive and professional arc welding robot solutions
which rely on TIME company strong ability of design, research, manufacturing
and services
Six Characteristics of TIME Industrial Robots

● The core components with independent intellectual property rights completely-----TIME robot controller
adopts the cost-effective IPC platform and Intime real-time System to achieve trajectory teaching and
reproduction. It is with interfaces of high-speed industrial Ethernet, RS485 and other field bus and clear
advantages in the function expansion, servo selection, sensor matching and upgrade and so on.
● TIME industrial robots, TIME positioner and digital welding machine builds up an eight-axis robot
system whose closed-loop control cycle is 200us to achieve complex welding.
● The robot main body is calibrated by the Dynalog robot performance test and evaluation system and the
robot calibration system from US, which improves the accuracy and trajectory precision of the robot.
● TIME company has strong ability of precision machining, heat treatment, casting, materials fatigue
testing on manufacturing and testing to ensure that TIME industrial robots with high quality, high
precision and high reliability.
● TIME company has more than 20 years of welding equipment manufacturing and welding technology
accumulation which combines with the perfect technology of TIME industrial robots to form the unique
technical advantages of TIME arc welding robot system.
● TIME company has the core technology of industrial robots to meet the user’s personalized custom
needs of the robot control system, mechanical body, welding and cutting, the system integration
and so on.
Equipped welder
The TIME arc welding Robot system outfits with TIME welding power source mainly. Some
international-renowned brand of welding power source can be outfits with TIME robots according to
user needs.
37
TIME Arc Welding Robot System
TIME R3-660 Welding Robot System
Item Technical parameters

Degrees of freedom 6
Maximum load capacity 3Kg
Repeat positioning accuracy ±0.05mm
Maximum motion radius 700mm
Drive mode AC servo motor
Installation On ground，Pendant or hoisting
Protection grade IP54
Ambient temperature 0-45℃
Environmental Relative humidity 20-80RH non-condensing
conditions Vibration ≤0.49g
Others Keep away from flammable or corrosive liquids
Power capacity 1.5KVA
Weight 30Kg

Ambient temperature 0～45℃
Environmental Relative humidity 20～80RH non-condensing
Power capacity 1.5KVA
Weight 160Kg

Ambient temperature 0-45℃
Power capacity 2KVA
Weight 280Kg
38

Installation On ground
Ambient temperature 0～45℃
Power capacity 5KVA
Weight 750Kg

Installation On ground
Ambient 0～45℃
temperature
Others Keep away from flammable
or corrosive liquids
Power capacity 220/380V，50~60HZ
Weight 1350Kg
TIME robot teach pendant
1、7 inch VGA color LCD touch screen Item Technical parameters
2、Local high-speed I / O interface to support Display size 7-inch TFT color LED
PS2, USB,RS232 protocol Display pixels 800×600
3、Teach pendant is light due to ABS engineering Display color 32 bit true color
plastic case 3-bit enable switch hand hold enable switch
4、Independent real-time 3D simulation Power DC24V
software easily to simulate teach security
Case material ABS
monitoring: position, speed, acceleration,
Emergency stop, teaching, pause, mode
error, communication, parameter etc. to Function buttons
selection, 49 operation keys
ensure the operation of the system safety Dimensions 393×226×82mm
Operating
0℃～40℃
environment
39
Data exchange controller
For different interface protocols, TIME specially
designed data exchange controllers, including the
following types of controllers, and the models, features
and welders are as shown in the table below:
Data exchange controller
Model Functions (Interface type and protocol) Model of supporting welders
TDW 4000/5000/6000
TFW 6000KA IO interfaces RS485 port (ModBus protocol)
TDW 4000M/5000M/6000M
TFN 6000KA IO interfaces RS485 port (ModBus protocol) TDN 3500/5000/6000

TDN 3500B/5000B/6000B
Built-in controller TDN 3501M/5001M
CAN interface (DeviceNet protocol)
(With welding robot)
Built-in controller IO interface (analog signal)

TDL 600/800/1000/1200
TFL 2000KA IO interfaces RS485 port (ModBus protocol)
Application
40
Auto-Welding and CNC Cutting Equipment

This series of products is auxiliary welding equipment which outfits with welding power source for
all position welding processing of large workpieces.
The series of products are widely used in the industrial field of wind power, steel structure, pressure
vessels, boilers, piping, vessels, surfacing and so on.
Main features
Many kinds of metal material can be cut and weld
Humanized design, safety protection facilities
Convenient operation, accurate control, high degree of automation
Welding quality stable, accurate positioning, high reliability
Smooth transmission, low noise, welding and cutting high precision
The product structure designs reasonable, integration and good rigidity
Large capacity, action is accurate, wide range of speed regulation, high production efficiency
Whole solutions can be realized from the sheet cutting to the product welding
The equipments can be customized according to user’s requirement
Selection Tip
TZ Series Manipulator Automatic welding manipulator can realize the automatic welding
TR1 Series Rotator Self aligning welding rotator for group workpiece welding.
TR2 Series Rotator Adjustable welding rotator for group workpiece welding.
TB1 Series Positioner Welding positioner can adjust the welding position easily
ZF Series Welding machine Longitudinal seam automatic welding machine can achieve the
straight seam welding with high quality and low deformation
TDCⅡ TDCⅢ TDCⅣ TDCV Automatic CNC cutting machine is good tool for the metal sheet
CNC cutting machine cutting in the field of industry
41
TZ Series Automatic Welding Manipulator (Column and Boom)
Main features
Multiform building block system

A whole profile for main body
Fitting cable with plastic pulling
Built-in weight balance
Hoist and lower parts reliable and safety
Machine tool rail design
According to the different configuration, this
series of products can be divided into five types:
TZ: fixed without rotation
TZ1: fixed and manual rotation
TZ2: fixed and electric rotation
TZ3: Fixed and electric moving
TZ4: electric rotation and electric moving
Specification 2x2 3x3 4x4 5X5 6X6 7X7 8X8
Vertical movement distance of boom (m) 2 3 4 5 6 7 8
Horizontal movement distance of boom (m) 2～4 2.5 ～ 5 3～7 3～8 4～8 4～8 4～8
0
Rotating angle of column(°) ±180
Vertical speed of the boom(mm/min) 850 1150
Horizontal speed of the boom(mm/min) 140 ～ 1400
Rotating speed of column(r/min) 0.2
The total equally distributed load of the boom 100 200 300 400 500 500 500
Rail type/Center distance of the rail (optional) P43/2000
Note: If the parameters and appearance of the equipment change, please refer to the actual product.
FD10-200 submerged arc welding head (electric trailing bar)
Main features Technical Specifications

Type of trailing bar
Single wire（dia. Φ3~Φ6mm） Model Up/down stroke Left/right stroke
/M
Casting parts, beautiful
/M
appearance, light weight /M
Advanced PWM to control the Type of SAW welding head

ITEM Model welding workpiece
speed of the wire feeding
welding head Cylinder diameter ≥ 700mm
Mini welding head Cylinder diameter ≥ 400mm
42
TR1 Series Self Aligning Welding Rotator
Main features
The roller angle automatic regulates according to the workpiece size, without manual adjustment
The drive adopts gear transmission to realize the four wheel drive
Steel plastic composite roller, high capacity, strong drive ability
Inverter for stepless speed regulation, adjustment range wide, starting torque large, high precision
The operation of control box is simple and reliable and it can connect to the control system of manipulator by
the linkage interface in electrical box to realize linkage operation
Drive mode: Cycloidal reducer drive or the worm reducer drive
Model TR1- TR1- TR1- TR1- TR1- TR1- TR1- TR1- TR1- TR1- TR1-
5T 10T 20T 30T 40T 50T 60T 80T 100T 150T 200T
Load capacity (t) 5 10 20 30 40 50 60 80 100 150 200
Diameter (mm) - - - 340 340 390 390 490 490 540 -

Two Steel
Roller Width (mm) - - - 30 30 40 40 60 60 100 -
group Diameter (mm) 250 250 300 350 350 400 400 500 500 550 600
One Rubber Width (mm) 120 120 140 120 120 120 120 120 120 120 400
Diameter Min. (mm) 350 350 600 600 600 750 800 900 900 1000 2000
of work
piece Max. (mm) 2500 2500 4000 4500 4500 5000 5000 5500 5500 6300 7000
Roller speed (mm/min) 100-1000
Motor power 1×0.25 2×0.25 2×0.37 2×0.37 2×0.55 2×0.75 2×0.75 2×1.1 2×1.5 2×2.2 2×5.5
Speed regulating mode Stepless speed regulation
M 1220 1220 1740 1980 1980 2240 2240 2540 2540 3050 4610
Length (mm)
S 1220 1220 1740 1980 1980 2240 2240 2540 2540 3050 3720
Overall M 850 885 920 1080 1100 1180 1280 1640 1640 1910 1720
size Width (mm)
S 310 310 400 480 480 540 540 620 620 760 1150
Height (mm) 685 685 890 1070 1070 1050 1050 1280 1280 1610 1665
Note: If parameters and appearance change, please take actual goods as final. “-” depends upon customers’ request.
Model TR1(XZ)-5T TR1(XZ)-10T TR1(XZ)-20T TR1(XZ)-30T TR1(XZ)-40T TR1(XZ)-50T TR1(XZ)-60T TR1(XZ)-80T TR1(XZ)-100T
Motor power
2X0.37 2X0.37 2X0.55 2X0.75 2X0.75 2X1.5 2X1.5 2X2.2 2X2.2
（kw）
Moving Speed
800～8000
（mm/min）
Note: Parameters above are for moving Rotators
43
TR2 Series Adjustable Welding Rotator
Main features
The distance of roller center is adjustable through the reserved screw-hole to adapt to the
change of the diameter of workpiece
All rubber roller or steel plastic composite roller, high capacity, strong drive ability
Inverter for stepless speed regulation, adjustment range wide, starting torque large, high precision
The operation of control box is simple and reliable and it can connect to the control system of manipulator
by the linkage interface in electrical box to realize linkage operation
Drive mode: Cycloidal reducer drive or the worm reducer drive
Model no. TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2- TR2-
5T 10T 20T 30T 40T 50T 60T 80T 100T 150T 200T 300T 400T 600T
Load capacity (t) 5 10 20 30 40 50 60 80 100 150 200 300 400 600
Diameter(mm) - - - 340 340 390 440 510 510 620 700 700 800 800
two Steel
Roller Width(mm) - - - 30 30 40 50 240 240 240 250 300 300 350
group Diameter(mm) 250 250 300 350 350 400 450 - - - - - - -
One Rubber
Width(mm) 120 120 140 120 120 120 120 - - - - - - -
Diameter Min(mm) 250 300 350 600 600 850 850 850 1000 1000 1000 1000 1000 1000
of work
piece Max(mm) 1800 3000 3600 4200 4200 5000 5000 5000 5500 6000 6500 6500 6500 7000
Roller speed (mm/min) 100-1000
Motor power(kw) 1×0.25 2×0.25 2×0.37 2×0.55 2×0.55 2×0.75 2×0.75 2×1.1 2×1.5 2×2.2 2×5.5 2×5.5 2×7.5 2×11
Speed regulating mode Stepless speed regulation
M 1200 1710 1870 2310 2310 2700 2700 3070 3070 3570 5200 5330 5380 6690
Length (mm)
S 1200 1710 1870 2310 2310 2700 2700 3070 3070 3570 4710 4980 4770 5390
Overall
size M 680 680 770 850 850 1030 1120 1420 1440 1650 1110 1080 1450 1510
Width (mm)
S 270 270 320 400 400 500 500 570 570 600 720 1080 1110 1110
Height (mm) 460 460 530 610 610 680 720 820 820 1000 1065 1300 1420 1690
Note: If parameters and appearance change, please take actual goods as final. “-” depends upon customers’ request.
Model TR2(XZ)-5T TR2(XZ)-10T TR2(XZ)-20T TR2(XZ)-30T TR2(XZ)-40T TR2(XZ)-50T TR2(XZ)-60T TR2(XZ)-80T TR2(XZ)-100T
Motor power
2X0.37 2X0.37 2X0.55 2X0.75 2X0.75 2X1.5 2X1.5 2X2.2 2X2.2
（kw）
Moving Speed
800～8000
（mm/min）
Note: Parameters above are for moving Rotators
44
TB Series Welding Positioner
Main features
Special auxiliary equipment for welding, it makes the work-piece in the best position for welding by the
rotation of positioner’s worktable.
The worktable makes by steel through fine processed, positioning lines are equally marked on the table,
and several of T type grooves are available for installationof all kinds of orientating and tightening device
The operation of control box is simple and reliable and it can connect to the control system of manipulator
by the linkage interface in electrical box to realize linkage operation
Worm wheel-worm decelerating device is adopted on the turnover process to obtain a constant turnover
speed with the angle range of 120°. It has the advantages of large turnover torque, self-lock and
orientation reliable
The rotary table adopts imported frequency converter to realize stepless speed regulation, speed regulation
range is wide and operation stable
The machine adopts seat type structure with high stability for the whole equipment so it doesn’t general
be fixed in the ground and easy to move
The machine adopts seat type structure with high stability for the whole equipment so it doesn’t general
be fixed in the ground and easy to move
Suitable for welding various of shaft, disk, cylinder type of workpiece
Model TB1-6 TB1-12 TB1-20 TB1-30 TB1-40 TB1-50 TB1-80 TB1-100 TB1-150 TB1-200 TB1-250 TB1-500
load capacity(kg) 600 1200 2000 3000 4000 5000 8000 10000 15000 20000 25000 50000
Rotating speed r/min 0.1-1 0.09-0.9 0.09-0.9 0.06-0.6 0.06-0.6 0.05-0.5 0.05-0.5 0.05-0.5 0.02-0.2 0.04-0.4 0.04-0.4 0.02-0.4
Turning speed r/min 0.73 0.35 0.36 0.27 0.24 0.24 0.25 0.24 0.15 0.15 0.15 0.15
Turning angle (°) 0-120 0-120 0-120 0-120 0-120 0-120 0-120 0-120 0-90 45-90 45-90 45-90
Diameter of work table 800 1100 1200 1300 1400 1600 1800 2000 2200 2500 3000 5000
(mm)
Height of work table 830 1100 1200 1490 1500 1520 1800 2030 2300 2400 2400 3225
(mm)
Max
Allowable load 150 200 200 200 200 200 200 200 200 200 200 200
work piece eccentrity
off-center (mm) Max
200 250 300 300 300 300 350 400 500 500 500 500
load
Rotating motor power 0.37 1.5 1.1 1.5 1.5 2.2 3 4 4 2×2.2 23 2×7.5
(kw)
Turning motor power (kw) 0.37 0.75 1.5 2.2 2.2 3 4 5.5 7.5 2×3 2×5.5 2×11
Note: If the parameters and appearance of the equipment change, please refer to the actual product.。
45
Longitudinal Seam Automatic Welding Machine
Main features
Work-piece clamp adopts the keys pressed type mechanism to provide uniform and stable work holding and
cooling effect
Applied in high quality, low-distortion and linear seam welding
PLC control, DC motor drive, stepless speed regulation and a linear oscillator is optional
The welding seam can be 100% welding with back protection bushing and the line groove for different
welding grooveand one side welding double side formation
Work-piece thickness: 0.4~8mm, welding speed is 0.2 ~ 2.2m/min
Longitudinal seam automatic welding system can be integrated with:
GTAW；PAW；GMAW；FCAW
SAW； YAG and so on
Model Welding length (mm) Min. diameter (mm) Max. diameter (mm) Workpiece thickness (mm) Welding speed (m/min)
ZF-500 525 φ75 φ730
ZF-1000 1125 φ115 φ730
ZF-1500 1650 φ150 φ730

1~8 0.2~1.6
ZF-2000 2025 φ180 φ850
ZF-2500 2550 φ200 φ850
ZF-3000 3075 φ270 φ850

The minimum diameter can be changed upon customer's request.
The maximum diameter can use standard accessory to increase hight.
46
CNC Cutting Machine

TDC II CNC Cutting Machine
Main features
Gantry structure with both side drive
Good rigidity, small inertia, track width: 4~7m
Used for fuel cutting also widely in plasma cutting
The longitudinal and transverse direction guides by high
precision linear.
There are mechanical and electrical safety devices on both sides
of the cross and vertical rails, so that the security is high.
Servo driven by Panasonic servo drive system, with position
detecting function, high precision
Track width (mm) 4000 4500 5000 5500 6000 6500 7000
Working width (mm) 3200 3700 4200 4700 5200 5700 6200
Overall width (mm) 4800 5300 5800 6300 6800 7300 7800
CNC system Time I / II MicroEDGE Pro
Plasma power According to the demand of the users
Torch lifting distance(mm) 200、300 available
Idle speed (mm/min) 0-10000
Cutting speed (mm/min) 0-6000
Flame cutting thickness (mm) 6-160 / 6-300
Fuel gas category Ethyne or natural gas, propane
Base category H-steel or cement base, standard configuration is H-steel base
Longitude chain Up chain or down chain, standard is down chain.
TDC III Desktop CNC Cutting Machine

Main features
Integrated design, good rigidity. Installation convenient, small space.
The longitudinal and transverse direction guides by high precision linear.
There are mechanical and electrical safety devices on both sides of the
cross and vertical rails, so that the security is high.
Using different of plasma power source to meet different user's
requirements of cutting
Fume treatment device is optional with compact structure
Servo driven by Panasonic servo drive system, with position detecting
function, high precision
Latitude with bilateral synchronous drive system, transmission smooth
Model 1830 1840

Cutting width (mm） 1800 1800
Overall width (mm） 2400 2400
Cutting length (mm) 3000 4000
Overall length (mm） 4620 5620
CNC system Mirco EDGE Pro or Time I / II
Cutting thickness Refer to plasma supply power
Cutting work table Normal or dust proof work table （not covered in standard type）
47
CNC Cutting Machine
TDC Ⅳ-A Unlimited rotary type CNC Cutting Machine

Main features
Groove CNC cutting machine is also called ship

plate cutting machine. It is mainly used in shipbuilding
industry and other heavy industry to cut the groove parts
with arbitrary shape.
TDC Ⅳ-B Fixed-Angle Bevel CNC Cutting Machine

Main features
TDC IV-B Fixed-angle Bevel CNC cutting machine

is designed by TIME with fixed bevel angle during cutting.
Its groove direction changes automatically following the
contour of the part. The bevel angle is preset manually in
accordance with the drawings before cutting and remains
during cutting. The CNC cutting system can adjust the
direction of torch automatically in real-time following the
contour of the part so that the bevel angle direction is
always perpendicular to the tangential direction of the part
contour.
Track width (mm) 4000 4500 5000 5500 6000
Working width (mm) 3100 3600 4100 4600 5100
CNC system Hypertherm Edge pro
Plasma power Hypertherm、KjellbergHigh Precision Plasma FineFocus
Nesting software Australia Fast CAM full automatic nesting software
48
Activities 企业活动
公司领导参观巴顿焊接研究所
Visited Paton Electric Welding 公司领导访问英国焊接研究所
Visited TWI
内部会议
公司组织的用户会 21世纪中国焊接技术研讨会
Beijing Essen Exhibition Brazil Industrial Exhibition
公司参加德国埃森国际焊接展
Essen Show in Germany 观者如潮
TIME evening party 时代焊接机器人亮相国际焊接展
TIME Welding robot show in exhibion
骏马驰骋
时代之夜优秀焊工表演赛
Automation Welding in Greece SAW in Indonesia

49
www.timewelder.com
TIME GROUP INC.

Beijing Time Technologies CO., Ltd.
Add: 17# Shangdi Kaituo Road, Haidian District, Beijing, 100085 China
Tel: 0086 10 62980812
Fax: 0086 10 62980814
Website:http://www.timewelder.com
E-mail: [email protected]
50
Print in Beijing August 2017

19c43b2f b1bd

Uploaded by

Copyright:

Available Formats

19c43b2f b1bd

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

19c43b2f b1bd

Uploaded by

Copyright:

Available Formats

TIME WELDER

TIME GROUP INC.

ISO9001 Quality System Certificated

Self Design Cooperation Creativity

2015 Intelligent plant initially completed.

2013 TD series digital welders batch into the market.

TIME welding industrial park with annual output of 300,000

2008 Passed Environmental Management System (ISO14001:

2007 TIME welding laboratory established to provide users

2006 Beijing Time Technologies Co., Ltd. listed on the Shenzhen

2002 TIME large CNC cutting machines and automatic welding

2001 TIME Group founded Beijing Time Technologies Co., Ltd

1995 First company passed ISO9001 quality system certification in

1993 Started independent development, production and sales of

Steel structure Oil and natural

Metallurgy Shipping industry

The container The automotive Transport

Machine Gas industry

Welding Power Source

TIME Arc Welding

Auto-Welding and CNC Cutting

Sheet of Available Metal Materials

Manual DC Arc Welding Machine ★ ★ ★ ★ ★ ★

1.The welding machines with input power single phase 220V

Model Company type Power input Welding Mode Details in page

TAZ2100 single phase 220V MMA Page 3

WSM-200 PNE20-200P single phase 220V TIG Pulse/MMA Page 12

2.The welding machines with input power 3 phase 220V

Model Company type Power input Welding Mode Details in page

ZX7-400 PE60-400 3 phase 220V MMA Page 4

ZX7-400 PE60-400E 3 phase 220V MMA Page 4

ZX7-400 PE60-400F 3 phase 220V MMA Page 4

NB-500 A160-500B/BC/R 3 phase 220V MIG/MAG Page 19

MZ-1000 A310-1000 3 phase 220V SAW Page 27

3.The welding machines with input power (Multi-voltage)

Model Company type Power input Welding Mode Details in page

TDN-5000K 3 phase 220V/440V MIG/MAG Page 32

Specialized Industrial welder

ZX7-400(PE60-400F) S u i t a b l e t o u s e w i t h ZX7-315(PE61-315) Whole digital welding

Manual DC Arc Welding Machine

Accessories Code TAZ1600 TAZ2100

Model TAZ1600 TAZ2100

Output current adjusting range(A) 30～160 / 30～100 30～210

Duty cycle (40℃) 35% / 50% 35%

Model ZX7-400 ZX7-400 ZX7-400

Manual DC Arc Welding Machine

● stand for available

Alarm1 Alarm2 Power

500A Welding Machine

Triple welding machine

Manual DC Arc Welding Machine

● stand for available

DC TIG/MMA Welding Machine

DC TIG/MMA Pulse Welding Machine

Widely used in the field of maintenance;

DC TIG/MMA Pulse Welding Machine

AC/DC Pulse TIG/MMA Square Wave Welding Machine

● stand for available

TAZ2100 　 single phase 220V MMA Page 3

　60%（350A，31.5V）　60%（500A，39V）　60%（630A，44V）

　60%（350A，31.5V）　60%（500A，39V）　60%（630A，44V）