IJCRT1704210
IJCRT1704210
ABSTRACT: In India, the cement industry is the second most consumed material on the planet. The
cement companies have seen a net profit growth rate of 85 per cent. With this huge success, the cement
industry in India has contributed almost 8 per cent to India’s economic development.
ACC (ACC Limited) is India's foremost manufacturer of cement and concrete. ACC's operations are
spread throughout the country with 17 modern cement factories, more than 40 Ready mix concrete plants,
21 sales offices, and several zonal offices. ACC has a unique record of accomplishment of innovative
research, product development and specialized consultancy services.
The study is about the financial performance of the ACC LIMITED. The primary objective is to
study the financial performance of the cement industry and the secondary objectives are to evaluate the
profitability, liquidity and the operational position of the industry. The secondary data is used for the
research. It has been collected from the company’s annual report and balance sheet. Tools such as Ratio
analysis and trend analysis have been used for analyzing the data. The results of the study indicate that the
company’s liquidity position and solvency are in comfortable position.
INTRODUCTION:
Cement is a global commodity, manufactured at thousands of local plants. The cement industry in
India is dominated by around 20 companies, which account for almost 70 per cent of the total cement
production in India. Because of its weight, cement supply via land transportation is expensive, and generally
limited to an area within 300 km of any one-plant site. The industry is consolidating globally, but large,
international firms account for only 30 per cent of the worldwide market. China is the fastest growing
market today. Because it is both global and local, the cement industry faces a unique set of issues, which
attract attention from communities near the plant, at a national and an international level.
Financial analysis refers to the purpose of examining minutely and evaluating the financial condition
and the results of operations (i.e., the performance) of a business enterprise. In other words, financial
analysis is an in-depth study of a firm's financial position (i.e., capital, assets and liabilities of a firm at a
point of time) and its financial performance (i.e., income, profitability, solvency, earnings per share,
dividend payout etc.,) over a period.
Ratio analysis is a technique of analysis and interpretation of financial statement. It is the process of
establishing and interpreting various ratios for helping in making certain decisions. It is the only means of
better understanding of financial strengths and weakness of a firm.
There are various ratios, which can be calculated from the information given in the financial
statements, but in the study, we select the appropriate data and calculate only a few appropriate ratios. The
important ratios taken are liquidity ratio, long-term solvency activity and profitability ratios.
REVIEW OF LITERATURE
A review of past studies and theory relating to the problem of research helps not only definition of
concepts, problem focus, objectives and hypotheses, but also the choice of tools of analysis with attention to
their assumption and limitation. The several past studies related to cement industry and methods of
evaluating its performance and some of the reviews are:
Petia (2004) discussed in his study about performance of India’s non-financial corporate sector
since 1989, by using firm level data and evaluated its financial vulnerabilities. He has found that promising
trends in liquidity, profitability and leverage of the sector emerged in the early 1990s; he has experienced a
reversal after 1996. Nevertheless, most indicators were still at comfortable levels, and there was evidence of
improvement in 2002. The study also revealed that a number of firms still face problems servicing their debt
obligations, posing a risk to lenders. He has concluded that aggregate interest 37 coverage of the corporate
sector indicated that potential non-performing loans of the corporate sector remain high and this
underscores the need of the corporate sector remain high. He suggested this underscores the need for close
monitoring of the corporate sector in the future.
Jayant Sathaye (2005) the study revealed that, the Indian cement industryhas grown rapidly
over the past few decades and there have been significant investments in new cement kilns and associated
production equipment. This has led to a situation where India’s cement industry in made up of both some of
the world’s most energy-inefficient plants as well as some of the world’s best practice facilities. The
challenge for the Indian cement industry is to modernize or phase out the older, inefficient plants while
acquiring the best possible cement production technology as production inevitably expands in the coming
decades.
RESEARCH METHODOLOGY
Research Design
A research design is the arrangement of condition for collection and analysis data in a manner that
aims to combine relevance to the research purpose with economy in procedure. Research design is the
conceptual structure with in which research in conducted. It constitutes the blueprint for the collection
measurement and analysis of data. Research design includes and outline of what the researcher will do form
writing the hypothesis and it operational implication to the final analysis of data. A research design is a
frame work for the study and is used a guide in collection and analyzing the data. It is a strategy specifying
which approach will be used for gathering and analyzing the data.
The research applied in the study is Analytical Research Design. Analytical study is a system of
procedures and techniques of analysis applied to quantitative data. It may consist of a system of
mathematical models or statistical techniques applicable to numeric data.
Interpretation
From the above table, it is understood that the current ratio of the company ranges minimum of 0.88
during the year 2015 and maximum of 1.42 during the year 2012. The ideal norm is 2:1 of current ratio
which means that one rupee of current liability is approximately covered by the two rupees of current assets
and it also depicts more consistency level.
Current Ratio
1.6
1.42
1.4 1.36 1.35
1.2
0.96
1 0.88
0.8
0.6
0.4
0.2
0
201 201 201 20
2011 2 3 4 15
Quick Ratio
The quick ratio is an indicator of a company’s short-term liquidity. The quick ratio measures a
company’s ability to meet its short-term obligations with its most liquid assets.
Quick Ratio
Ratios Formula 2011 2012 2013 2014 2015
Quick Ratio Current Asset-Inventory÷ 1.03 1.09 1.01 0.63 0.57
Current Liability
Interpretation
From the above table, it is understood that the quick ratio of the company ranges minimum of 0.57
during the year 2015 and maximum of 1.09 during the year 2012.The ideal norms of quick ratio is 1:1
which means that one rupee of current liability is approximately covered by the one rupee of liquid asset,
and it also depicts more consistency level.
Quick Ratio
1.2
1.09
1.03 1.01
1
0.8
0.63
0.57
0.6
0.4
0.2
0
Dec'11 Dec'12 Dec'13 Dec'14 Dec'15
Current Liability
Current liabilities are a company's debts or obligations that are due within one year, appearing on the
company's balance sheet and include short term debt, accounts payable, accrued liabilities and other debts.
Current Liability
Data 2011 2012 2013 2014 2015
Current Liability 100 103.84 99.64 115.46 116.21
Interpretation: There is an increase in current liability. This is not a good sign for the firm.
CURRENT LIABILITY
Current Liability
Fixed Asset
Fixed asset is a long-term tangible piece of property that a firm owns and uses in the production
of its income and is not expected to be consumed or converted into cash any sooner than at least one
year's time.
Fixed Asset
140
114.29 116.47
120 100
93.94 96.2
100
80
60
40
20
0
2011 2012 2013 2014 2015
FINDINGS
The ideal current ratio is 2:1 and the study period of current ratio of the company is satisfactory.
Quick ratio of the company is satisfactory as it is up to the standard norm 1:1. The firm has the
ability to meet its current liability.
In the inventory turnover ratio, it indicates the number of times stock is turned during the year. Thus,
the ratio of the firm is much satisfactory.
SUGGESTIONS
The financial performance of ACC LIMITED, doing the study period (2011-2015) is in satisfactory
position, with the available data in the annual report, is able to give opinion with regard to the company’s
performance from the researchers point of view.
The current asset and fixed asset may be utilized to optimum level.
The company can increase its profit margin.
The company may try to maintain good cash position. o The effective utilization of sales may be
improved.
CONCLUSION
The analysis of financial performance of ACC LIMITED is performed in this project report. The
liquidity position of the company is satisfactory hence, the company can meet out its short –term liabilities.
The solvency ratios indicate that the company is also strong in solvency as there may not be a problem in
fulfilling their long-term liabilities. However the profitability position is not that much attractive. The
company may improve its profitability by measures like cost reduction, control and modernization of the
production. Over all the ACC LIMITED is efficient as far as per the performance. The firm should
consolidate to become strong, vibrant and also, they have to concentrate on export market besides
maintaining a good supply chain management (SCM) strategy.
REFERENCES
1. Jayant Sathaye (2005) Assessment of Energy Use and Energy Savings Potential in Selected Industrial
Sectors in India U.S. Environmental Protection Agency through the U.S. Department of Energy. [Reference]
2. Alovsat Muslumov (2005), The financial and operating performance of privatized companies in the
Turkish cement industry, METU Studies in Development, 32 (June), 2005, 59-1012. [Reference]
3. 'Global Cement Directory 2013,' PRo Publications International Ltd., Epsom, UK, November 2012.
4. Sharma R K and Shashi K Gupta, “Management accounting – Principles and practice”, Kalyani
publishers, 7th Edition, 1998.
5. Back issues of 'Global Cement Magazine,' PRO Pubications International Ltd., Epsom, UK, January 2012
- January 2013.
6. Brigham E.F., “Fundamental of financial management”, The Dryden press Hinsdale, Illinois, 1978.
7. Wright M.G., “Financial Management”, Tata McGraw-Hill publishing Co. New Delhi, 1978.
8. Annual reports of select cement company.
9. Media Reports, India in Business, Cement Corporation of India, Department of Industrial Policy and
Promotion (DIPP), Cement Manufacturers Association (CMA).