Professional Documents
Culture Documents
40pfh4201 88 Dfu Eng
40pfh4201 88 Dfu Eng
www.philips.com/welcome
User Manual
32PHH4201
32PHT4201
32PHT4201
40PFH4201
40PFT4201
Contents
8 TV guide 26
8.1 What you need 26
8.2 Using the TV guide 26
10 Sources 30
10.1 Switch to a device 30
10.2 From standby 30
10.3 EasyLink 30
2
1
TV Tour
1.1
1.2
EasyLink
With EasyLink you can operate a connected device,
like a Bluray Disc player, with the remote control of
the TV.
EasyLink uses HDMI CEC to communicate with the
connected devices.
3
2 accident or injury.
Setting up 2.3
2.1 Tips on placement
Read safety - Position the TV where light does not shine directly
on the screen.
Read the safety instructions first before you use the
- Position the TV up to 15 cm away from the wall.
TV.
- The ideal distance to watch TV is 3 times its
In Help, go to Safety and care > Safety. diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
2.2
4
Use this antenna connection for DVB-T and DVB-C
input signals.
2.6
Satellite dish
- For PHK/PFK models
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
5
3
Connect devices
3.1
About connections
Copy protection
Connectivity guide HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
Always connect a device to the TV with the highest that prevents copying content from a DVD disc or Blu-
quality connection available. Also, use good quality ray Disc. Also referred to as DRM (Digital Rights
cables to ensure a Management).
good transfer of picture and sound.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The HDMI ARC
guide offers information on how to connect and
which cables to use. HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home
Go to www.connectivityguide.philips.com Theatre System (HTS), also has the HDMI ARC
connection, connect it to HDMI 1 on this TV. With the
HDMI ARC connection, you do not need to connect
Antenna port the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
If you have a Set-top box (a digital receiver) or combines both signals.
Recorder, connect the antenna cables to run the
In case you prefer to switch off ARC on the HDMI
antenna signal through the Set-top box and/or
connections, press and select Setup and
Recorder first before it enters the TV. In this way, the
press OK. Select TV
antenna and the Set-top box can send possible
settings > Sound > Advanced > HDMI 1 - ARC.
additional channels to the Recorder to record.
EasyLink
HDMI ports
HDMI quality
6
Viera Link. Not all brands are fully compatible with
DVI to HDMI
EasyLink.
Example HDMI CEC branding names are property of If you still own a device that only has a DVI
their respective owners. connection, you can connect the device to any of
the HDMI connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a
Operate devices DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
To operate a device connected to HDMI and set up Audio In for sound, on the back of the TV.
with EasyLink, select the device - or its activity - in
the list of TV connections. Press SOURCES , select
a device connected to an HDMI connection and
Copy protection
press OK.
Once the device is selected, the TV remote control DVI and HDMI cables support HDCP (High-bandwidth
can control the device. Digital Content Protection). HDCP is a copy protection
However and OPTIONS keys and some signal that prevents copying content from a DVD disc
other TV keys are not forwarded to the device. or Blu-ray Disc. Also referred to as DRM (Digital
If the key you need is not on the TV remote control, Rights Management).
you can select the key in the Options menu.
Press OPTIONS and select Controls in the
menu bar. On the screen, select the device key you Audio Out - Optical
need and press OK.
Some very specific device keys might not be available Audio Out - Optical is a high quality sound
in the Controls menu. connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Note: Only devices that support EasyLink Remote
Theatre System (HTS), has no HDMI ARC connection,
Control function will respond to the TV remote
you can use this connection with the Audio In -
control.
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.
EasyLink On or Off
7
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
3.3
CAM
3.4
Insert a CAM module
Switch off the TV before inserting a CAM.
Satellite receiver
Look on the CAM for the correct method of insertion. Connect the dish antenna cable to the Satellite
Incorrect insertion can damage the CAM and TV. receiver.
Next to the antenna connection, add an HDMI cable
to connect the device to the TV.
8
Connect with HDMI
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
9
1. Press and select Setup and press OK. No sound
2. Select TV
settings > Sound > Advanced > Audio out offset. If you cannot hear the sound from the TV on your
3. Use the slider bar to set the sound offset and Home Theatre System, check the following . . .
press OK. - Check if you connected the HDMI cable to a HDMI
4. Press , repeatedly if necessary, to close the 1 connection on the Home Theatre System.
menu.
- Check if the HDMI ARC setting on the TV is
switched On.
Go to > Setup > TV
Audio Out format settings > Sound > Advanced > HDMI 1 -ARC.
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
3.6
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can Blu-ray Disc player
send the compressed multichannel sound signal from
a TV channel or connected player to the Home Use a High speed HDMI cable to connect the Blu-ray
Theatre System. If you have a Home Theatre System Disc player to the TV.
without multichannel sound processing, select Stereo.
To set the Audio Out format . . .
1. Press and select Setup and press OK.
2. Select TV
settings > Sound > Advanced > Audio out format.
3. Select Multichannel or Stereo.
4. Press , repeatedly if necessary, to close the
menu.
Audio Out levelling If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
Use the Audio Out leveling setting to level the volume
control.
(loudness) of the TV and the Home Theatre System
when you switch over from one to another. Volume
differences can be caused by differences in sound
processing.
3.7
To level the difference in volume . . .
1. Press and select Setup and press OK. DVD player
2. Select TV
Use an HDMI cable to connect the DVD player to the
settings > Sound > Advanced > Audio out
TV.
leveling.
3. If the volume difference is large, select More. If the
volume difference is small, select Less.
Press , repeatedly if necessary, to close the menu.
Audio Out leveling affects both the Audio Out -
Optical and HDMI ARC sound signals.
10
3.8 you can check if you can record digital TV channels in
your country.
Game console Press TV GUIDE on the remote control. If there is
a Record button on the TV guide page, you can
HDMI record.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
1. Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB
device to the other USB ports when formatting.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
Best Setting connected permanently.
11
press (Pause). Trying to pause will start the 3.12
formatting. Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
Computer
connected permanently.
Connect
3.10 You can connect your computer to the TV and use
the TV as a PC monitor.
USB flash drive With HDMI
You can view photos or play your music and videos Use an HDMI cable to connect the computer to the
from a connected USB flash drive. TV.
Insert a USB flash drive in one of the USB
connections on the TV while the TV is switched on.
Best Setting
3.11
Ideal monitor setting
Camcorder - HDMI
If your computer is added as a Computer type of
For best quality, use an HDMI cable to connect the device in the Source menu (the list of connections),
camcorder to the TV. the TV is set to the ideal Computer setting
automatically.
If you use your computer to watch movies or use it to
play games, you might want to set the TV back to the
ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1. Press and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Activity style.
3. Select Game, Computer or TV. The
setting TV returns to the picture settings for
watching TV.
4. Press , repeatedly if necessary, to close the
menu.
Remember to set the Game or computer setting back
to Computer when you stop playing the game.
12
3.13
Headphones
Side
You can connect a set of headphones
to connection on the TV. The connection is a mini-
jack 3.5mm. You can adjust the volume of the
headphones separately.
To adjust the volume . . .
1. Press and select Setup and press OK.
2. Select TV settings > Sound > Headphone
volume and press OK.
3. Press (up) or (down) to adjust the volume.
4. Press , repeatedly if necessay, to close the
menu.
13
4 key.
Switch on 4.3
4.1 Sleep timer
On, Standby or Off With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
For 4100, 4200, 4101, 4111, 4201 series To set the sleep timer . . .
Before you switch on the TV, make sure you plugged 1. Press and select Setup and press OK.
in the mains power in the POWER connector on the 2. Select TV settings > General settings > Sleep
back of the TV. timer.
To put the TV in Standby when the indicator light is With the slider bar you can set the time to up to 180
off, press the small joystick key on the back of the TV. minutes in increments of 5 minutes. If set to 0
The indicator will light up. minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
With the TV in standby, press on the remote during the countdown.
control to switch the TV on. 3. Press , repeatedly if necessary, to close the
menu.
Switch to standby
To switch the TV to Standby, press on the remote
control. 4.4
14
5 1. SOURCES
To open or close the Sources menu - the list of
Remote control connected devices.
2. Colour keys
5.1 The buttons function follow the on-screen
instructions.
Key overview (For 4000,
3. INFO
4100, 4200, 4101, 4111, 4201, To open or close programme infomation.
Middle 1. Volume
To adjust the volume level.
2. Number keys and text keypad
To select a TV channel directly or to enter text.
3. SUBTITLE
To switch subtitles on, off or Automatic.
4. Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
5. Mute
To mute the sound or to restore it.
15
6. TEXT
To open or close Text / Teletext.
5.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
5.3
Batteries
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type AAA-LR03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3. Reposition the battery door.
4. Slide it back until it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
5.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
16
6 select All, Favourites, Radio, and New channels.
TV channels 6.2
6.1 Watching TV channels
Channel Lists
Watching channels
About channel lists
Tune to a channel
After a channel installation, all channels appear on
To watch TV channels, press . The TV tunes to the
the channel list. Channels are shown with their name
TV channel you last watched.
and logo if this information is available.
With a channel list selected, press the Switch channels
arrows (up) or (down) to select a channel, - To switch channels, press or .
then press OK to watch the selected channel. You - If you know the channel number, type in the
only tune to the channels in that list when number with the number keys. Press OK after you
using or keys. entered the number to switch immediately.
Channel icons Previous channel
After an Automatic Channel Update of the channel - To switch back to the previously tuned channel,
list, newly found channels are marked with press .
a (star).
If you lock a channel, it will be marked with Channel list
a (lock). While watching a TV channel, press LIST to open
the channel lists.
Radio stations
The channel list can have several pages with
If digital broadcasting is available, digital radio
channels. To view the next or previous page,
stations are installed during installation. Switch to a
press + or .
radio channel just like you switch to a TV channel. A
To close the channel lists without switching channel,
Cable (DVB-C) channel installation usually places
press LIST again.
radio stations from channel number 1001 onwards.
This TV can receive digital television standard DVB . Radio channels
TV may not work properly with some operators of If digital broadcasting is available, digital radio station
digital television , non-compliance with requirements are installed during installation. Switch to a radio
of the standard in full. channel just like you switch to a TV channel.
17
To unlock a channel, select the locked channel in the 1. While watching a channel, press OPTIONS.
channel list, press OPTIONS , then 2. Press OPTIONS again to close.
select Unlock channel. You will need to enter the
Child lock code.
Subtitles and subtitle language
To prevent children from watching a programme not To switch on Subtitles, press SUBTITLE.
suitable for their age, you can use an age rating. You can set subtitles to Subtitles off, Subtitles
Some digital broadcasters have age rated their on, or Automatic.
programmes. When the age rating of a programme is
Automatic
equal to or higher than the age you have set as age
rating for your child, the programme will be locked. If language information is part of the digital broadcast
To watch a locked programme you must enter the and the broadcasted programme is not in your
child lock code. The parental age rating is set for all language (the language set on TV), the TV can show
channels. subtitles automatically in one of your preferred
subtitle languages. One of these subtitle languages
To set an age rating . . .
must also be part of the broadcast.
1. Press and select Setup and press OK.
You can select your preferred subtitle languages
2. Select Channel settings > Child lock > Parental
in Subtitle Language.
rating and press OK.
3. Enter a 4-digit Child lock code. Enter a 4-digit
Child lock code and confirm. Now you can set an age
rating. Preferred subtitle languages
4. Set the age and press OK.
5. Press , repeatedly if necessary, to close the Subtitles for digital channels
menu. There is no need to set subtitles in Text for digital
6. To switch off the parental age rating, channels.
select None as age setting. Digital channels can offer several subtitle languages
The TV will ask for the code to unlock the programme. for a programme. You can set a preferred primary and
For some broadcasters / operators, the TV only locks secondary subtitle language. If subtitles in one of
programmes with a higher rating. these languages are available, the TV will show them.
If none of the preferred subtitle languages are
Set or change the lock code available, you can select another subtitle language
To set the lock code or to change the current code . . . which is available.
1. Press and select Setup and press OK. To set the primary and secondary subtitle language . .
2. Select Channel settings > Child lock > Change .
code and press OK. 1. Press and select Setup and press OK.
3. If a code is set already, enter the current Child lock 2. Select Channel settings and select Languages.
code and then enter the new code twice. 3. Select Primary subtitle language or Secondary
The new code is set. subtitle language and press OK.
4. Select a language and press OK.
Forgotten your code? 5. Press , repeatedly if necessary, to close the
menu.
To override and enter a new child lock code in case
you forget it, enter 8888.
18
Subtitles for analogue channels Dual I-II
For analogue channels, you need to make the
If an audio signal contains two audio languages but
subtitles available for each channel manually.
one language — or both — has no language
1. Switch to a channel and press TEXT to open Text. indication, this option is available.
2. Enter the page number for subtitles, usually 888.
3. Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching Common Interface
this analogue channel, subtitles will be shown if
If prepaid premium content is available from a CAM,
available.
you can set the provider settings with this option.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
MHP applications
Audio language Enable or disable the MHP applications.
Video selection You can only reorder channels in the Favourites list.
Digital TV channels can offer multi video signals (multi- 1. In the channel list Favourites, highlight the channel
feed broadcast), different camera viewpoints or you want to reposition.
angles of the same event or different programmes on 2. Press (green).
one TV channel. The TV shows a message if any such 3. Select the channel to reorder and press OK.
TV channels are available. 4. Press the Navigation buttons to move the
19
highlighted channel to another location and 2. Select a word or number with the arrow keys.
press OK. 3. Press OK again to jump immediately to the next
5. Once complete, press EXIT to exit from occurence of this word or number.
the Favourite channel list. 4. Press OK again to jump to the subsequent
occurence.
5. To stop searching, press (up) until nothing is
Rename channels selected.
You can rename channels in the channel list. Text from a connected device
1. Select the channel you want to rename in one of Some devices that receive TV channels can also offer
the channel lists. Text.
2. Press (red). To open Text from a connected device . . .
3. You can enter text with the the on-screen 1. Press , select the device and press OK.
keyboard. 2. While watching a channel on the device, press
OPTIONS , select Show device keys and select
the key and press OK.
Text / Teletext 3. Press to hide the device keys.
4. To close Text, press again.
Text pages Digital Text (UK only)
To open Text (Teletext) while you are watching TV Some digital broadcasters offer dedicated Digital Text
channels, press TEXT. or interactive TV on their digital TV channels. This
To close Text, press TEXT again. includes normal Text using the number, colour and
arrow keys to select and navigate.
Select a Text page
To close Digital Text, press .
To select a page . . .
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate. Text options
3. Press a colour key to select a colour-coded subject
at the bottom of the screen. In Text, press OPTIONS to select the following . . .
Search Text
You can select a word and scan Text for all
occurences of this word.
1. Open a Text page and press OK.
20
Text setup Copy channel list
Text language To copy a channel list . . .
Some digital TV broadcasters have several Text 1. Switch on the TV which has its channels installed.
languages available. Plug in a USB memory device.
To set your primary and secondary Text language . . . 2. Press and select Setup and press OK.
1. Press and select Setup and press OK. 3. Select TV settings > General settings > Copy
2. Select Channel settings > Languages. channel list > Copy to USB and press OK. To copy
3. Select Primary Teletext or Secondary Teletext. the channel list from this TV, you might be asked to
4. Select your preferred Text languages. enter the Child lock code you entered during the
5. Press , repeatedly if necessary, to close the installation.
menu. 4. When copying is done, unplug the USB memory
device.
Text 2.5
Now you can upload the copied channel list onto
If available, Text 2.5 offers more colours and better another Philips TV.
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5 . . .
Upload channel list
1. Press TEXT.
2. While watching the teletext, press OPTIONS. To not Installed TVs
3. Select Text 2.5 > Off.
4.Press , repeatedly if necessary, to close the Depending on whether your TV is already installed or
menu. not, you must use a different method to upload a
channel list.
21
channels. Finish the installation. When done, continue
with step 2.
2. Plug in the USB memory device that holds the
channel list of the other TV.
3. To start the channel list upload, press and
select Setup and press OK.
4. Select TV settings > General settings > Copy
channel list > Copy to TV and press OK. You might
be asked to enter the Child lock code of this TV.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
22
7 them.
23
Symbol rate mode Free / Scrambled
If your cable provider did not give you a specific If you have a subscription and a CAM - Conditional
symbol rate value to install the TV channels, leave the Access Module for pay TV services, select Free +
Symbol rate mode setting on Automatic. scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
If you received a specific symbol rate value, select
only.
Manual. However, the value you received could be in
the predefined list of symbol rates already. Select
Predefined symbol rates to check if your value is
available automatically. Reception Quality
24
To fine tune a channel, select Fine tune and
press OK. You can fine tune the channel
with or .
If you want to store the channel found,
select Done and press OK.
- Store
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new
channel.
You can redo these steps until you found all available
analogue TV channels.
25
8
Change day
TV guide The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
8.1
If the TV guide information comes from the
What you need broadcaster, you can press + to view the schedule
of one of the next days. Press to go back to the
With the TV guide you can view a list of the current previous day.
and scheduled TV programmes of your channels. Alternatively, you can press OPTIONS and select
Depending on where the TV guide information (data) Change day.
is coming from, analogue and digital channels or only Select Previous day, Today or Next day and press
digital channels are shown. Not all channels offer TV OK, to select the day of the schedule.
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed Set a reminder
from a digital receiver.
You can set a reminder for a programme. A message
will alert you at the start of the programme. You can
8.2 tune to this channel immediately.
List of Reminders
To open the list of reminders…
1. Press TV GUIDE.
2. Press the colour key Recordings .
26
3. At the top of the screen, select Scheduled and
press OK.
4. In the list of scheduled recordings and reminders,
select the tab Reminders and press OK to view the
reminders only.
5. Press the colour key Remove to remove the
selected reminder. Press the colour
key Record to record the selected programme.
Set a Recording
You can set a recording in the TV Guide*.
In the TV Guide, a programme set to be recorded is
marked with .
To see the recording list, press Recordings , a
programme set to be recorded is marked with
a (red dot) on the front of the programme name.
To record a programme…
1. Press TV GUIDE and select a future or ongoing
programme.
2. Press the colour key Record .
To cancel a recording…
1. Press TV GUIDE and select the programme set
for recording.
2. Press the colour key Clear Recording .
27
9 1. Press TV GUIDE.
2. On the TV Guide, select the channel and
Recording and programme you wish to record. Press (right)
or (left) to scroll through the programmes of a
channel. Use the colour key Day to select the
pause TV day you need.
3. With the programme highlighted, press the colour
9.1 key Record . The programme is scheduled for
recording. A warning will show automatically when
Recording overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
What you need leave the TV switched to Standby and the USB Hard
Drive switched on.
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need… List of recordings
- a connected USB Hard Drive formatted on this TV You can view and manage your recordings in the list
- digital TV channels installed on this TV of recordings. Next to the list of recordings, there is a
- to receive channel information for the on screen TV separate list for scheduled recordings and reminders.
Guide
To open the list or recordings…
- a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail. 1. Press TV GUIDE.
2. Press the colour key Recordings .
You cannot record when you are using Pause TV.
3. In the list of recordings, select the
In terms enforcement of copyright legislation, some tabs New, Watched or Expired and press OK to
DVB providers can apply different restriction by filter your view.
means of DRM (Digital Right Management) 4. With a recording selected in the list, you can
technology. In case of broadcasting protected remove the recording with the colour
channels, recording, record validity or number of key Remove or stop an ongoing recording
views may be restricted. Recording may be with the colour key Stop Recording . You can
completely prohibited. In case of trying to record a rename a recording with the colour key Rename .
protected broadcasting or play back an expired
Broadcasters can limit the number of days a recording
recording, , an error message can appear.
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list can show the number of days before it expires.
Record a programme When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
Record now
recording is marked as Failed.
To record the programme you are watching right now,
press (Record) on the remote control. The
recording will start immediately. Recording Conflicts
To stop the recording, press (Stop). When two scheduled recordings are overlapping in
When TV Guide data is available, the programme you time, there is a recording conflict. To solve a recording
are watching will be recorded from the moment you conflict, you can adjust the start and end time of one
pressed the recording key until the programme or both scheduled recordings.
ends. If no TV Guide data is available, the recording To adjust the start or end time of a scheduled
will only last 30 minutes. You can adjust the end time recording…
of the recording in the list of Recordings.
1. Press TV GUIDE.
2. Press the colour key Recordings .
3. At the top of the screen, select Scheduled and
Schedule a recording
press OK.
You can schedule a recording of an upcoming 4. In the list of scheduled recordings and reminders,
programme for today or a few days from today select the tab Recordings and press OK to view
(maximum of 8 days away). The TV will use the data the scheduled recordings only.
from the TV Guide to start and end the recording. 5. Select the scheduled recording that conflicts with
another scheduled recording and press the colour
To record a programme…
28
key Adjust Time . With the USB Hard Drive connected and formatted,
6. Select the start or end time and change the time the TV continuously stores the TV broadcast you are
with the (up) or (down) keys. watching. When you switch to another channel, the
Select Apply and press OK. broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
Manual Recording You cannot use Pause TV when you are recording.
You can schedule a recording that is not linked to a
TV programme. You set the tuner type, channel and
the start and end time yourself. Pause a programme
To schedule a recording manually… To pause and resume a broadcast…
1. Press TV GUIDE. To pause a broadcast, press (Pause). A progress
2. Press the colour key Recordings . bar at the bottom of the screen appears briefly.
3. At the top of the screen, select Scheduled and To call up the progress bar, press (Pause) again.
press OK. To resume watching, press (Play).
4. Press OPTIONS, select Schedule and
press OK. With the progress bar on screen, press (Rewind)
5. Select the tuner from where you want to record or press (Forward) to select from where you want
and press OK. to start viewing the paused broadcast. Press these
6. Select the channel to record from and press OK. keys repeatedly to change speed.
7. Select the day of the recording and press OK. You can pause a broadcast for a maximum time span
8. Set the start and end time of the recording. Select a of 90 minutes.
button and use the (up) or (down) keys to set
the hours and minutes. To switch back to the live TV broadcast,
9. Select Schedule and press OK to schedule the press (Stop).
manual recording.
The recording will appear in the list of scheduled
recordings and reminders. Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
Watch a Recording seconds.
9.2
Pause TV
What you need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
29
10
Sources
10.1
Switch to a device
In the list of connections - the Source menu - you can
find the devices connected to the TV. From this
Source menu, you can switch to a device.
Sources menu
To open the Sources menu, press SOURCES .
To switch to a connected device, select the device
with the arrows (left) or (right) and press OK.
To close the Source menu without switching to a
device, press SOURCES again.
10.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press (play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press SOURCES on the TV remote control.
10.3
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
30
11 3. Press , repeatedly if necessary, to close the
menu.
Timers and clock
11.1
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Press and select Setup and press OK.
2. Select TV settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press , repeatedly if necessary, to close the
menu.
11.2
Clock
To know what time it is, press TV GUIDE to find
the time in the TV guide.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock . . .
1. Press and select Setup and press OK.
2. Select TV settings > General settings >
Clock > Auto clock mode and select Country
dependent.
3. Select Daylight saving and select the appropriate
setting.
11.3
31
12 To show the progress bar when a video is playing
(playhead position, duration, title, date, etc.),
Videos, Photos and press INFO.
Press again to hide the info.
Music
12.1
Video options
From a USB connection During the video playback, press OPTIONS to…
- Subtitles
You can view your photos or play your music and Display the subtitles if available.
videos from a connected USB flash drive or USB Hard
Drive. - Audio language
With the TV switched on, plug in a USB flash drive or a Play the audio language if available.
USB Hard Drive to one of the USB connections. The
TV detects the device and will list your media files. - Repeat, Play once
Play videos repeatedly or once.
If the list of files does not appear automatically…
1. Press SOURCES, select USB and - Shuffle on, Shuffle off
press OK. Play videos in sequence or at random.
2. Select USB Devices and press (right) to
select the USB device you need. - Show info
Display the file name.
You can browse your files in the folder structure you
have organised on the drive. - Subtitle settings
To stop playing videos, photos and music, Set subtitle colour and position if available.
press EXIT.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format 12.3
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
View your photos
View photos
12.2
How you open the list of your media files on TV
Play your videos depends on the type of device where the files are
stored. See the chapters above.
Play videos To view all photos on TV…
How you open the list of your media files on TV Select Photos , and select All and press OK.
depends on the type of device where the files are To view a photo on TV…
stored. See the chapters above.
Select Photos , and select the file name and
To play a video on TV… press OK.
Select Videos , and select the file name and To start a slide show on TV…
press OK.
If there are several photos in a folder, you can start a
- To pause the video, press OK. Press OK again to slide show.
continue.
- To rewind or go fast forward, press or . Press To start a slide show…
the keys several times to speed up - 2x, 4x, 8x, 16x, 1. Select the folder with photos.
32x. 2. Press the colour key Slide Show .
- To jump to the next video in a folder, press OK to
- To jump to the next or previous
pause and select on screen and press OK.
photo, press (right - next) or (left - previous).
- To stop the video playback, press (Stop).
- To pause the slide show, press OK. To start again,
- To go back to the folder, press .
press OK again.
Progress Bar - To stop the slide show, press OK and press .
32
Info 12.4
To view info on a photo (size, creation date, file path, Play your music
etc.), select a photo and press INFO.
Press again to hide the info.
Play music
How you open the list of your media files on TV
Slideshow with music depends on the type of device where the files are
stored. See the chapters above.
You can watch a slideshow of your photos and listen
To play a song on TV…
to your music at the same time. You must start the
usic before you start the photo slideshow. Select Music , and select the file name and
press OK
To play music with the slide show…
If there are several songs in a folder, you can listen to
1. Select a song or a folder with songs and press OK.
them one after the other.
2. Press INFO to hide file info and progress bar.
3. Press . - To pause a song, press OK. Press OK again to
4. Now use the navigation arrows to select the folder continue.
with photos. - To rewind or go fast forward, press or . Press
5. Select the folder with photos and press Slide the keys several times to speed up - 2x, 4x, 8x, 16x,
Show. 32x.
6. To stop the slideshow, press . - To jump to the next song in a folder, press OK to
pause and select on screen and press OK.
- To go back to the folder, press , the music will
keep on playing.
Photo options - To stop the music playback, press (Stop).
With a photo on screen, press OPTIONS to… Progress Bar
- Start slideshow, Stop slideshow To show the progress bar when a song is playing
Start or stop slideshow. (playhead position, duration, title, date, etc.),
press INFO .
- Slideshow transitions Press again to hide the info.
Set the transition from one picture to the next.
- Slideshow frequency
Select the display time for each photo. Music options
Options for playing music...
- Repeat, Play once
View the pictures repeatedly or once only. - Stop playback
Stop music play.
- Shuffle off, Shuffle on
View the pictures in sequential order, or at random. - Repeat, Play once
Play songs repeatedly or once.
- Rotate image
Rotate photo. - Shuffle on, Shuffle off
Play songs in sequence or at random.
- Show info
Display the picture name, date, size and next picture - Show info
in the slide show. Display the file name.
- Stop music
Stop the music playing in the background.
33
13 1. Press and select Setup and press OK.
2. Select TV settings > General
Settings settings > Location and press OK.
3. Select Home and press OK.
13.1 4. Press , repeatedly if necessary, to close the
menu.
Picture
Picture style Picture settings
Select a style Colour
For easy picture adjustment, you can select a preset With Colour, you can adjust the colour saturation of
Picture Style. the picture.
1. Press and select Setup and press OK. To adjust the colour ...
2. Select TV settings > Picture > Picture style, and
select one of the styles in the list. 1. Press and select Setup and press OK.
3. Select a style and press OK. 2. Select TV settings > Picture > Colour.
3. Press (right) and adjust the value with (up)
The available Picture styles are ...
or (down).
4. Press , repeatedly if necessary, to close the
- Personal - The picture preferences you set during
menu.
the first start up.
- Vivid - Ideal for daylight viewing
- Natural - Natural picture settings
- Standard - Most energy conscious setting - Contrast
Factory setting
With Contrast, you can adjust the brightness of the
- Movie - Ideal for watching movies
display backlight.
- Photo - Ideal for viewing photos
- Energy saving - Energy-efficient settings To adjust the level ...
The selected style will store the changes you made. With Sharpness, you can adjust the level of
We recommend to adjust the picture settings for the sharpness in fine detail of the picture.
style Personal only. The Picture style - Personal can
To adjust the sharpness ...
save its settings for each individual connected device
in Sources menu.
1. Press and select Setup and press OK.
To restore the style to its original setting… 2. Select TV settings > Picture > Sharpness.
3. Press (right) and adjust the value with (up)
1. Press and select Setup and press OK.
or (down).
2. Select TV settings > Picture > Restore style, and
4. Press , repeatedly if necessary, to close the
select the Picture Style you want to restore.
menu.
3. Press OK. The style is restored.
34
Game or computer Custom colour temperature
When you connect a device, the TV recognizes its With Custom colour temperature, you can set a
type and gives each device a correct type name. You colour temperature yourself. To set a custom colour
can change the type name if you wish. If a correct temperature, first select Custom in the Colour
type name for a device is set, the TV automatically temperature menu. Custom colour temperature is a
switches to the ideal TV settings when you switch to setting intended for expert users.
this device in the Sources menu.
To set a custom colour temperature…
If you have a game console with a built-in Blu-ray
1. Press and select Setup and press OK.
Disc player, you might have set the type name to Blu-
2. Select TV
ray Disc. With Activity style you can switch to the
settings > Picture > Advanced > Colour.
ideal settings for gaming manually. Don't forget to
3. Select Custom Colour Temperature and
switch to TV, when you return to watch TV.
press OK.
To switch the setting manually… 3. Press the arrows (up) or (down) to adjust
the value. WP is white point and BL is black
1. Press and select Setup and press OK.
level. You can also select one of the presets in this
2. Select TV
menu.
settings > Picture > Advanced > Activity style.
4. Press , repeatedly if necessary, to close the
3. Select Game, Computer or TV. The
menu.
setting TV returns to the picture settings for
watching TV.
4. Press , repeatedly if necessary, to close the
menu. Contrast Settings
Contrast modes
Colour settings With Contrast Mode, you can set the level at which
power consumption can be reduced by dimming the
Colour enhancement intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours. To adjust the level…
To adjust the level… 1. Press and select Setup and press OK.
2. Select TV
1. Press and select Setup and press OK.
settings > Picture > Advanced > Contrast >
2. Select TV
Contrast mode.
settings > Picture > Advanced > Colour.
3. Select Standard, Best power, Best picture,
3. Select Colour enhancement and press OK.
or Off.
3. Select Maximum, Medium, Minimum or Off.
4. Press , repeatedly if necessary, to close the
4. Press , repeatedly if necessary, to close the
menu.
menu.
Dynamic contrast
Colour temperature
With Dynamic Contrast, you can set the level at
With Colour temperature, you can set the picture to a
which the TV automatically enhances the details in
preset colour temperature or select Custom to set a
the dark, middle and light areas of the picture.
temperature setting yourself with Custom colour
temperature. Colour temperature and Custom colour To adjust the level…
temperature are settings intended for expert users.
1. Press and select Setup and press OK.
To select a preset… 2. Select TV
settings > Picture > Advanced > Contrast >
1. Press and select Setup and press OK.
Dynamic contrast.
2. Select TV
3. Select Maximum, Medium, Minimum or Off.
settings > Picture > Advanced > Colour.
4. Press , repeatedly if necessary, to close the
3. Select Colour Temperature and press OK.
menu.
3. Select Normal, Warm or Cool. Or
select Custom if you want to customise a colour
temperature yourself.
4. Press , repeatedly if necessary, to close the
menu.
35
1. Press and select Setup and press OK.
Brightness
2. Select TV
With Brightness, you can set the level of brightness settings > Picture > Advanced >
of the picture signal. Brightness is a setting intended Sharpness > Super resolution.
for expert users. We recommend non-expert users to 3. Select On or Off.
adjust the brightness of the picture with 4. Press , repeatedly if necessary, to close the
the Contrast setting. menu.
To adjust the level…
1. Press and select Setup and press OK. Noise reduction
2. Select TV
settings > Picture > Advanced > Contrast > With Noise reduction, you can filter out and reduce
Brightness. the level of image noise.
3. Press (right) and adjust the value with (up) To adjust the noise reduction…
or (down).
4. Press , repeatedly if necessary, to close the 1. Press and select Setup and press OK.
menu. 2. Select TV
settings > Picture > Advanced >
Sharpness > Noise reduction.
3. Select Maximum, Medium, Minimum or Off.
Video contrast
4. Press , repeatedly if necessary, to close the
With Video Contrast, you can decrease the range of menu.
the video contrast.
To adjust the level…
MPEG artefact reduction
1. Press and select Setup and press OK.
2. Select TV With MPEG artefact reduction, you can smoothen
settings > Picture > Advanced > the digital transitions in the picture. MPEG artefacts
Contrast > Video contrast. are mostly visible as small blocks or jagged edges in
3. Press (right) and adjust the value with (up) images.
or (down). To reduce the MPEG artefacts…
4. Press , repeatedly if necessary, to close the
menu. 1. Press and select Setup and press OK.
2. Select TV
settings > Picture > Advanced >
Sharpness > MPEG artefact reduction.
Gamma
3. Select Maximum, Medium, Minimum or Off.
With Gamma, you can set a non-linear setting for 4. Press , repeatedly if necessary, to close the
picture luminance and contrast. Gamma is a setting menu.
intended for expert users.
To adjust the level…
Format and edges
1. Press and select Setup and press OK.
2. Select TV Picture format
settings > Picture > Advanced > Contrast >
Gamma. If black bars appear on top and bottom or on both
3. Press (right) and adjust the value with (up) sides of the picture, you can adjust the picture format
or (down). to a format that fills the screen.
4. Press , repeatedly if necessary, to close the To change the picture format ...
menu.
1. Press and select Setup and press OK.
2. Select TV settings > Picture > Format and
edges > Picture format.
Sharpness settings
3. Select a format from the list and press OK.
4. Press , repeatedly if necessary, to close the
Super resolution
menu.
With Super Resolution, you switch on a superior To change the picture format while watching TV ...
sharpness in line edges and contours.
1. While watching a TV channel, press to open
To switch on or off… the Picture format menu.
36
2. Select a format from the list and press OK.
Restore a style
37
menu.
Headphones volume
38
the volume difference is small, select Less.
5. Press , repeatedly if necessary, to close the Menu language
menu.
To change the language of the TV menus and
messages…
Audio out delay 1. Press and select Setup and press OK.
2. Select TV settings > General settings > Menu
With a Home Theatre System (HTS) connected to the language.
TV, the picture on TV and the sound from the HTS 3. Select on the language you need.
should be synchronised. 4. Press , repeatedly if necessary, to close the
menu.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is automatically synchronised and
always correct.
Clock
Audio sync delay Date and Time
39
4. Press , repeatedly if necessary, to close the
menu. TV placement
As part of the first installation, this setting is set to
either On a TV stand or On the Wall. If you have
Sleep timer changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time. 1. Press and select Setup and press OK.
2. Select TV settings > General settings > TV
To set the sleep timer . . . Placement and press OK.
1. Press and select Setup and press OK. 3. Select On a TV stand or On the Wall.
2. Select TV settings > General settings > Sleep 4. Press , repeatedly if necessary, to close the
timer. menu.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can Factory settings
always switch off your TV earlier or reset the time
during the countdown. You can set the TV back to the original TV settings
3. Press , repeatedly if necessary, to close the (the factory settings).
menu.
To switch back to the original settings…
1. Press and select Setup and press OK.
2. Select TV settings > General settings > Factory
Switch off timer Settings and press OK.
If the TV receives a TV signal but you don't press a 3. Press , repeatedly if necessary, to close the
key on the remote control during a 4 hour period, the menu.
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off Reinstall TV
automatically.
You can redo a full TV installation. The TV is
If you use the TV as a monitor or use a digital receiver
completely reinstalled.
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should To redo a full TV installation…
deactivate this automatic switch off.
1. Press and select Setup and press OK.
To deactivate the Switch off timer … 2. Select TV settings > General settings > Reinstall
TV and press OK.
1. Press and select Setup and press OK.
3. Follow the instructions on screen. The installation
2. Select TV settings > General settings > Switch
may take a few minutes.
off timer.
3. Select inside the slider bar to adjust the value. The
value 0 (Off) deactivates the automatic switch off.
4. Press , repeatedly if necessary, to close the
menu.
Location
To set the TV for Home use…
1. Press and select Setup and press OK.
2. Select TV settings > General
settings > Location and press OK.
3. Select Home and press OK.
4. Press , repeatedly if necessary, to close the
menu.
40
14
European energy label
Specifications The European Energy Label informs you on the
energy efficiency class of this product. The greener
14.1 the energy efficiency class of this product is, the
lower the energy it consumes.
Environmental On the label, you can find the energy efficiency class,
the average power consumption of this product in use
Saving energy and the average energy consumption for 1 year. You
can also find the power consumption values for this
The Eco settings bundle the settings that help the product on the Philips website for your country at
environment. www.philips.com/TV
While you are watching TV channels, press to
open Eco settings.
Press again to close Eco settings .
Product Fiche
Energy saving
This Picture style sets the picture, in the most ideal For 4201 series
energy conscious setting.
32PHx4201
Screen off
- Energy Efficiency Class : A+
If you only listen to music, you can switch off the TV
- Visible Screen Size : 80 cm / 32 inch
screen to save energy.
- On Mode Power Consumption (W) : 30 W
Select Screen off and press OK. To switch the
- Annual Energy Consumption (kWh) * : 44 kWh
screen back on, press any key on the remote control.
- Standby Power Consumption (W) **: 0.30 W
Auto switch off - Off Mode Power Consumption (W) : 0.30 W
- Display Resolution (Pixels) : 1366x768p
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10 40PFx4201
minutes, the TV switches off automatically to save
- Energy Efficiency Class : A+
energy.
- Visible Screen Size : 102 cm / 40 inch
If you use the TV as a monitor or use a digital receiver
- On Mode Power Consumption (W) : 42 W
to watch TV (a Set-top box - STB) and you do not use
- Annual Energy Consumption (kWh) * : 61 kWh
the remote control of the TV, deactivate the
- Standby Power Consumption (W) **: 0.30 W
automatic switch off.
- Off Mode Power Consumption (W) : 0.30 W
In addition to the Eco settings, your TV also has - Display Resolution (Pixels) : 1920x1080p
environmentally friendly technology with regard to
* Energy consumption kWh per year, based on the
power consumption.
power consumption of the television operating 4
Inactive devices off hours per day for 365 days. The actual energy
consumption depends on how the television is used.
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are ** When the TV is turned off with the remote control
inactive. and no function is active.
Power management
The advanced power management of this TV ensures End of use
the most efficient use of energy. You can check how
your personal TV settings, the level of brightness in Disposal of your old product and batteries
current onscreen pictures, and the surrounding light
conditions determine the relative power Your product is designed and manufactured with high
consumption. quality materials and components, which can be
To check the relative power consumption . . . recycled and reused.
41
covered by the European Directive 2002/96/EC.
Display resolutions
Computer formats - HDMI (Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
Please inform yourself about the local separate 1280 X 720 - 60 Hz
collection system for electrical and electronic 1280 X 768 - 60 Hz
products. 1280 x 1024 - 60 Hz
Please act according to your local rules and do not 1360 x 768 - 60 Hz
dispose of your old products with your normal 1680 x 1050 - 60 Hz*
household waste. Correct disposal of your old 1920 x 1080 - 60 Hz*
product helps to prevent potential negative
consequences for the environment and human Computer formats - VGA (Resolution - refresh rate)
health. 640 x 480 - 60 Hz
800 x 600 - 60 Hz
Your product contains batteries covered by the 1024 x 768 - 60 Hz
European Directive 2006/66/EC, which cannot be 1280 x 1024 - 60 Hz
disposed with normal household waste. 1360 x 768 - 60 Hz
1920 x 1080 - 60 Hz*
models 14.4
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband; S-Channel; UHF; VHF
Power
- DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K; Product specifications are subject to change without
DVB-T2 : only for TV types '. . . T/12'; DVB-C (cable) notice. For more specification details of this product,
QAM see www.philips.com/support
- Analogue video playback : NTSC; SECAM; PAL
- Digital video playback : MPEG2 SD/HD (ISO/IEC Power
13818-2); MPEG4 SD/HD (ISO/IEC 14496-10)
- Mains power : AC 220-240V +/-10%
- Digital audio playback (ISO/IEC 13818-3)
- Ambient temperature : 5°C to 35°C
- Standby power consumption : less than 0.3W
- Power saving features : Eco mode, Picture mute
14.3
(for radio), Auto switch off , Eco settings menu.
Display The power rating stated on the product typeplate is
the power consumption for this product during
Type normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
For 4201 series used for electrical safety (IEC 60065 Ed. 7.2).
42
14.5 - TV ANTENNA: 75 ohm coaxial (IEC)
Multimedia
14.6
Note: Multimedia file names must not exceed 128
Connectivity characters.
Supported multimedia connections
For 4101, 4111, 4201 series - USB (FAT / FAT 32 / NTFS): only connect USB
devices that consume 500 mA of power or less.
For PxK4101, PxK4201
Supported image files
TV Rear
- JPEG: *.jpg, *.jpeg
- HDMI 1 ARC: HDMI Audio Return Channel - PNG: *.png.jpg
- HDMI 2
Supported audio files
- SERV. U: Service port
- MPEG1: *.mp3
- SCART (RGB/CVBS): SCART adaptor
- AUDIO IN (DVI): Stereo 3.5mm mini-jack Supported video files
- DIGITAL AUDIO OUT: SPDIF - *.avi, *.mp4, *.mov, *.mkv, *.mpg, *.mpeg
- TV ANTENNA: 75 ohm coaxial (IEC)
Supported subtitle format
- Satellite
- SRT: multiple language support
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
For
PxH4101/PxT4101, 40PFT4111, PxH4201/PxT4201
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- SERV. U: Service port
- SCART (RGB/CVBS): SCART adaptor
- AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack
- DIGITAL AUDIO OUT: SPDIF
43
15 15.3
44
3-0 layers, not only on top of the Linux Framebuffer
Device.
It is a complete hardware abstraction layer with
libpng software fallbacks for every graphics operation that is
not supported by the underlying hardware. DirectFB
libpng is the official PNG reference library. It supports
adds graphical power to embedded systems and sets
almost all PNG features.
a new standard for graphics under Linux.
Source: www.libpng.org
Source: http://directfb.org/
OpenSSL (1.0.0.d)
libTomMath (0.42.0)
The OpenSSL Project is a collaborative effort to
LibTom Projects are open source libraries written in
develop a robust, commercial-grade, full-featured,
portable C under WTFPL. The libraries supports a
and Open Source toolkit implementing the Secure
variety of cryptographic and algebraic primitives
Sockets Layer (SSL v2/v3) and Transport Layer
designed to enable developers and students to
Security (TLS v1) protocols as well as a full-strength
pursue the field of cryptography much more
general purpose cryptography library. The project is
efficiently.
managed by a worldwide community of volunteers
that use the Internet to communicate, plan, and Source: http://libtom.org/
develop the OpenSSL toolkit and its related
documentation.
Source: www.openssl.org MTD utility (1.5.0)
45
libexpat
libdrm
FFMpeg (0.6)
46
16 Philips startup screen
General
The TV does not switch on Picture
- Disconnect the power cable from the power outlet. No picture / distorted picture
Wait for one minute then reconnect it.
- Make sure that the power cable is securely - Make sure that the antenna is properly connected
connected. to the TV.
- Make sure that the correct device is selected as the
Creaking sound at startup or switch off display source.
- Make sure that the external device or source is
When you are turning the TV on, off or to standby,
properly connected.
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and Sound but no picture
contraction of the TV as it cools and warms up. This
does not affect performance. - Make sure that the picture settings are set correctly.
The TV requires some time to start up. During this - Make sure that the antenna is properly connected
time, the TV does not respond to the remote control to the TV.
or TV controls. This is normal behaviour. - Loud speakers, unearthed audio devices, neon
If the TV continues to be unresponsive to the remote lights, high buildings and other large objects can
control, you can check if the remote control is working influence reception quality. If possible, try to improve
by means of a mobile phone camera. Put the phone the reception quality by changing the antenna
in camera mode and point the remote control to the direction or moving devices away from the TV.
camera lens. If you press any key on the remote - If reception on only one channel is poor, fine-tune
control and you notice the infra red LED flicker this channel.
through the camera, the remote control is working. Poor picture from a device
The TV needs to be checked.
If you do not notice the flickering, the remote control - Make sure that the device is connected properly.
might be broken or its batteries are low. - Make sure that the picture settings are set correctly.
This method of checking the remote control is not
Picture settings change after a while
possible with remote controls which are wirelessly
paired with the TV. Make sure that Location is set to Home . You can
change and save settings in this mode.
The TV goes back to standby after showing the
A commercial banner appears
47
EasyLink does not work
Make sure that Location is set to Home. - Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
Picture does not fit the screen
that are HDMI-CEC compatible.
Change to a different picture format. Press .
No volume icon shown
Picture format keeps changing with different
- When a HDMI-CEC audio device is connected this
channels
behaviour is normal.
Select a non 'Auto' picture format.
Photos, videos and music from a USB device do not
Picture position is incorrect show
Picture signals from some devices may not fit the - Make sure that the USB storage device is set to
screen correctly. Check the signal output of the Mass Storage Class compliant, as described in the
connected device. storage device's documentation.
- Make sure that the USB storage device is
Computer picture is not stable
compatible with the TV.
Make sure that your PC uses the supported resolution - Make sure that the audio and picture file formats
and refresh rate. are supported by the TV.
48
16.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our colaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
16.5
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV or
void your warranty.
49
17
Risk of injury or damage to the TV
Safety and care - Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
17.1
- If you mount the TV on a stand, only use the
Safety supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
Important
- When wall mounted, ensure that the wall mount
Read and understand all safety instructions before can safely bear the weight of the TV set. TP Vision
you use the TV. If damage is caused by failure to bears no responsibility for improper wall mounting
follow instructions, the warranty does not apply. that results in accident, injury or damage.
- Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Secure the TV from falling over
Risk of damage to the TV !
Always use the supplied wall bracket to secure the TV Before you connect the TV to the power outlet,
from falling over. Mount the bracket and secure the ensure that the power voltage matches the value
TV onto the bracket, even if you put the TV on the printed on the back of the TV. Never connect the TV
floor. to the power outlet if the voltage is different.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide from
www.philips.com
Risk of injury
Use the product type number of the TV to look for the Follow these precautions to prevent the TV from
Quick Start Guide to download. toppling over and causing injury:
- Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
Risk of electric shock or fire
- Ensure that no part of the TV hangs over the edge
- Never expose the TV to rain or water. Never place of the mounting surface.
liquid containers, such as vases, near the TV. - Never place the TV on tall furniture, such as a
If liquids are spilt on or into the TV, disconnect the TV bookcase, without anchoring both the furniture and
from the power outlet immediately. TV to the wall or a suitable support.
Contact Philips TV Consumer Care to have the TV
checked before use. - Teach children about the dangers of climbing on
furniture to reach the TV.
- Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning Risk of swallowing batteries !
candles, naked flames or other heat sources, The remote control may contain coin-type batteries
including direct sunlight. which can easily be swallowed by small children.
- Never insert objects into the ventilation slots or Keep these batteries out of reach of children at all
other openings on the TV. times.
- Never place heavy objects on the power cord.
- Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
Risk of overheating
exerted on the power cord when you swivel the TV Never install the TV in a confined space. Always leave
screen. a space of at least 10 cm or 4 inches around the TV
- To disconnect the TV from the mains power, the for ventilation. Ensure curtains or other objects never
power plug of the TV must be disconnected. When cover the ventilation slots on the TV.
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
50
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Low temperatures
If the TV is transported in temperatures below 5
degrees Celsius or 41 degrees Fahrenheit, unpack
the TV and wait until the TV temperature reaches
room temperature before connecting the TV to the
power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
17.2
Screen care
- Never touch, push, rub or strike the screen with any
object.
- Unplug the TV before cleaning.
- Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
- To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
51
18 property of the display (within common industry
standards) and is not a malfunction.
Terms of use, CE compliance
Hereby, TP Vision Europe B.V. declares that this
copyrights and television is in compliance with the essential
requirements and other relevant provisions of
52
Dolby
Dolby®
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
MHEG software
The copyright in MHEG software (the Software)
comprised in this television (this product) and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
(the Owner). You are permitted to use the Software
only in conjunction with this product.
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
53
Index
54
55