Professional Documents
Culture Documents
E0289
E0289
Salient features :
1. A complete book for understanding the syllabus of Chemistry XII.
2. Chapter Outline, Important Terms, Units, Laws, Formulae, Properties and Reactions given at
the beginning of each chapter.
3. Model answers to all the textual questions as well as additional questions for understanding
basic and advanced concepts given in the Textbook.
4. Answers to inquisitive and brain stimulating questions under the titles ‘Can you tell ?’,
‘Just think’, ‘Use your brain power’, etc. are given in each chapter.
5. Includes important questions from NCERT book for reference.
6. Includes well-formulated ample number of Multiple Choice Questions (MCQs).
7. Simple and lucid language.
8. Neat fully-labelled, authentic and easily-reproducible diagrams.
9. Very useful book to understand the subject well and to prepare thoroughly for HSC Board
Examination as well as other competitive examinations like NEET, JEE MAIN, MHT-CET, etc.
By
NAVNEET
New Edition : 2020
E0289
Visit us at : www.navneet.com
e-mail : [email protected]
--------------------------------------------------------------------------------------------------------
★ Navneet Bhavan, 1302, Shukrawar Peth,
Bajirao Road, Near Sanas Plaza,
Pune – 411 002.
Phone : (020) 2443 1007
e-mail : [email protected]
--------------------------------------------------------------------------------------------------------
★ 63, Opp. Shivaji Science College,
Congress Nagar,
Nagpur – 440 012.
Phone : (0712) 242 1522
e-mail : [email protected]
--------------------------------------------------------------------------------------------------------
★ Nirman Inspire, 2nd Floor,
Kanhere Wadi, Opp. Old CBS,
Nashik – 422 001.
Phone : (0253) 259 6950 ● Fax : (02531) 259 6950
e-mail : [email protected]
© All rights reserved. No part of this book may be copied, adapted, abridged or translated, stored in any retrieval
system, computer system, photographic or other system or transmitted in any form or by any means without a prior
written permission of the copyright holders, M/s. Navneet Education Limited. Any breach will entail legal action and
prosecution without further notice.
2
PREFACE
It gives us great pleasure to present you this first edition of Navneet Chemistry Digest (Part II) for
Standard XII. This book is prepared according to the Maharashtra Board’s New Textbook and latest
question pattern.
We understand that the Higher Secondary Examination is very crucial in a student’s career. As in the
past, this Navneet Digest will help you to triumph.
Each chapter of the Digest begins with important Terms, Units, Laws, Formulae, Properties, Reactions,
etc. for instant revision. This book includes all the questions given in the Board’s Textbook as well as
important questions from NCERT book and also many additional questions with their model answers
so as to cover every concepts given in the Textbook.
Besides these, all the other questions or informations given in various boxes in the textbook such as
'Can you tell?', ‘Do you know?’, 'Use your brain power', 'Observe and discuss', etc. are also included.
Ample number of Multiple Choice Questions (MCQs) have been given to enable the students to prepare
for any type of competitive examination, such as NEET, JEE MAIN, MHT-CET, etc.
Neat, accurate and easily reproducible diagrams are given in each chapter.
In short, this Chemistry Digest contains a lucid and clear explanation of the subject matter in simple
language.
We hope this Digest will help the students to master the subject. Besides it will also help them to secure
excellent marks in the examination and pave the way for realising their dreams of a bright and fruitful
career.
We have taken utmost care to see that this Digest proves to be very useful to the students as well as
the teachers. Suggestions for improvement of the Digest are most welcome and will be gratefully
acknowledged and appreciated.
—The Publishers
3
CONTENTS
Page No.
4
9 COORDINATION COMPOUNDS
COORDINATION COMPOUNDS
CHAPTER OUTLINE
Page No.
.... Important Terms … 6
.... Exercises
9.1 Introduction … 7
9.2 Types of ligands … 7
9.2.1 Monodentate ligands … 7
9.2.2 Polydentate ligands … 7
9.2.3 Ambidentate ligand … 7
9.3 Terms used in coordination chemistry … 9
9.3.1 Coordination sphere … 9
9.3.2 Charge number of complex ion and oxidation state of metal ion … 9
9.3.3 Coordination number (C.N.) of central metal ion … 9
9.3.4 Double salt and coordination complex … 9
9.3.5 Werner theory of coordination complexes … 9
9.4 Classification of complexes … 13
9.4.1 Classification on the basis of types of ligands … 13
9.4.2 Classification on the basis of charge on the complex … 13
9.5 IUPAC nomenclature of coordination compounds … 15
9.6 Effective Atomic Number (EAN) Rule … 17
9.7 Isomerism in coordination compounds … 19
9.7.1 Stereoisomers … 19
9.7.2 Structural isomers (Constitutional isomers) … 19
9.8 Stability of the coordination compounds … 30
9.8.1 Factors which govern stability of the complex … 30
9.9 Theories of bonding in complexes … 31
9.9.1 Valence Bond Theory (VBT) … 31
9.9.2 Octahedral complexes … 33
9.9.3 Tetrahedral complexes … 33
9.9.4 Square planar complex … 33
9.9.5 Limitations of VBT … 33
9.9.6 Crystal Field Theory (CFT) … 38
9.9.7 Factors affecting Crystal Field splitting parameter ( ) … 38
9.9.8 Colour of the octahedral complexes … 38
9.9.9 Splitting of d-orbitals in tetrahedral and octahedral complexes … 38
9.10 Applications of coordination compounds … 46
.... Multiple Choice Questions … 47
9. COORDINATION COMPOUNDS 5
1. Coordination compound : It consists of a central metal atom or ion surrounded by atoms, molecules or
anions called ligands bonded by coordinate bonds, e.g. cisplatin, Pt (NH ) Cl , [Cu(NH ) ]SO .
2. According to Werner’s theory, metal atom or ion in the complex has primary valence (outer sphere) and
secondary valence (inner sphere).
3. Coordination number (C.N.) : The number of ligand donor atoms directly bonded to the central metal atom
or ion by coordination bonds or number of electron pairs involved in the coordinate bonds is coordination
number (C.N.).
; (i) Monodentate ligands (Cl\, OH\, NH , H O, etc.)
; (ii) Bidentate (en, C O\ etc.)
4. Ligands : IIIII; (iii) Tridentate (dien)
; (iv) Tetradentate (trien)
; (v) Hexadentate (EDTA)
5. Classification of complexes on the basis of types of ligands :
(1) Homoleptic complexes Ni(CO) , [Co(NH ) ]Cl
(2) Heterleptic complexes [Co(NH ) Cl H O]Cl
6. Classification of complexes on the basis of charge :
(1) Cationic sphere complexes, [Zn(NH ) ]>, [Co(NH ) Cl]>
(2) Anionic sphere complexes, [Ni(CN) ]\, [Fe(CN) ]\
(3) Neutral sphere complexes, [Pt(NH ) Cl ], [Ni(CO) ]
7. Effective atomic number : EAN:Z9X;Y
8. Isomerism in complexes : (1) Stereoisomerism : (i) Geometrical isomerism
(ii) Optical isomerism
(2) Structural isomerism : (i) Ionisation isomerism
(ii) Linkage isomerism
(iii) Coordination isomerism
(iv) Solvate isomerism
; (i) Valence bond theory (VBT)
; (ii) Crystal field theory (CFT)
9. Bonding in complexes : IIIIIII
; (iii) Ligand field theory (LFT)
; (iv) Molecular orbital theory (MOT)
10. Valence bond theory (VBT) : A central metal atom or ion undergoes hybridisation like sp, dsp, dsp, etc.
forming hybridised orbitals to accommodate the lone pairs of electrons from the ligands.
11. (1) Inner complex : (n91) d orbitals of metal are used
(2) Outer complex : nd orbitals of metal are used.
12. Crystal field theory (CFT) :
Degenerate d-orbitals : dxy , dyz , dzx , d(x9y) and dz
14. Factors affecting stability of the complex : (1) Charge to size ratio of the metal ion
(2) Nature of ligands
; (1) In biology
; (2) In medicines
15. Applications of the coordination compounds : ––
; (3) To estimate hardness of water
; (4) In electroplating
Units
9.1 Introduction
9.2 Types of ligands
9.2.1 Monodentate ligands
9.2.2 Polydentate ligands
9.2.3 Ambidentate ligand
★ Q. 5. Name the Lewis acids and bases in the complex [Pt Cl (NH ) ]. (1 mark)
Ans. Lewis acid : Pt2;
Lewis bases : Cl\ and NH ■
★ Q. 6. What are ligands ? What are their types ? Give one example of each type. (4 marks)
Ans. Ligands : The neutral molecules or negatively charged anions (or rarely positive ions) which are bonded by
coordinate bonds to the central metal atom or metal ion in a coordination compound are called ligands or donor
groups. For example in [Cu(CN) ]\, four CN\ ions are ligands coordinated to central metal ion Cu>.
Ligands can be classified on the basis of number of electron donor atoms in the ligand i.e. denticity.
(1) Monodentate or unidentate ligand : A ligand molecule or an ion which has only one donor atom with a lone pair
of electrons forming only one coordinate bond with metal atom or ion in the complex is called monodentate or
unidentate ligand. For example NH , Cl\, OH\, H O, etc.
(2) Polydentate or multidentate ligand : A ligand molecule or an ion which has two or more donor atoms with the
lone pairs of electrons forming two or more coordinate bonds with the central metal atom or ion in the complex is
called polydentate or multidentate ligand. For example, ethylene diamine, H N–(CH ) –NH .
According to the number of donor atoms they are classified as follows :
(i) Bidentate ligand : This ligand has two donor atoms in the molecule or ion. For example, ethylenediamine,
H N–(CH ) –NH .
(ii) Tridentate ligand : This ligand molecule has three donor atoms or three sites of attachment.
.. .. ..
E.g. Diethelene triamine, H N –CH –CH – NH –CH –CH – NH . This has three N donor atoms.
(iii) Tetradentate (or quadridentate) ligand : This ligand molecule
has four donor atoms.
Eg. Triethylene tetraamine which has four N donor atoms.
(iv) Hexdentate ligand : This ligand molecule has six donor atoms. E.g. Ethylenediamine tetracetato.
(3) Ambidentate ligand : A ligand molecule or an ion which has two or more donor atoms, however in the formation
of a complex, only one donor atom is attached to the metal atom or an ion is called ambidentate ligand. For
example, NO\ which has two donor atoms N and O forming a coordinate bond, M < ONO (nitrito) or M < NO
(nitro).
Q. Draw Lewis structures of the following ligands and identify the donor atom in them :
NH , H O.
Ans.
Ligand Lewis dot structure Donor atom
NH N
H O O
Units
9.3 Terms used in coordination chemistry
9.3.1 Coordination sphere
9.3.2 Charge number of complex ion and oxidation state of metal ion
9.3.3 Coordination number (C.N.) of central metal ion
9.3.4 Double salt and coordination complex
9.3.5 Werner theory of coordination complexes
Try this …
(Textbook page 193)
Q. Can you write ionisation of [Ni (NH ) ] Cl ?
Ans. [Ni (NH ) ] Cl IIIIIJ [Ni (NH ) ]2; ;2Cl 9
Q. Identify coordination sphere and counter ions.
Ans. Coordination sphere : [Ni (NH ) ]>
Counter ions : Cl\
9. COORDINATION COMPOUNDS 9
Q. 9. Define and explain charge number of a complex ion. (2 marks)
Ans. Charge number of a complex ion : The net charge carried by a complex ion or a coordination entity is called
its charge number.
Explanation :
(i) Charge number is equal to the algebraic sum of the charges carried by central metal atom or ion and all the ligands
attached to it.
(ii) E.g. consider anionic complex, [Fe(CN) ]\.
Charge number of [Fe(CN) ]\:Charge on Fe> ions;6;charge on CN\:(;2);6(91):94
Hence charge number of [Fe(CN) ]\ is 94. ■
Q. 10. Explain the oxidation state of a metal in a complex. (2 marks)
Ans.
(i) The oxidation state of a metal atom or ion in the complex is the apparent charge carried by it in the complex.
(ii) It depends upon the atomic number and electronic configuration of the metal atom or ion.
(iii) The coordination number, the formula and geometry of a complex depend upon the oxidation state of the metal
atom or ion. ■
Q. 11. What is the charge on a monodentate ligand X in the complex, [NiX ]\ ? (2 marks)
Ans. The charge number of the complex ion is 92. Nickel being divalent, its oxidation state is ;2. If the charge on
monodentate ligand X is y, then
Charge number:charge on Ni>;charge on 6X
92: ;2;4;y
y: 91
Hence the charge on ligand X is 91. ■
Q. 14. Mention primary valence, secondary valence and coordination number in the following complexes :
(a) [Cu(NH ) ]Cl (b) [Co(NH ) Cl ] (c) K [Fe(CN) ] (d) [CoF ]\
(e) [Pt(NH ) Cl ] (f) [Pt(NH ) (Py) Cl ] (g) Cr(CO) (h) [Ni(CN) ]\ (2 marks each)
Ans.
Primary valence /
Complex Secondary valence Coordination number
Valency of metal
Q. Coordination number used in coordination of compounds is somewhat different than that used in solid
state. Explain.
Ans.
● In a coordination compound the coordination number is the number of donor atoms of ligands directly attached
to metal atom or ion.
● In a solid state, the number of closest constituent atoms or ions in contact with a particular atom in the crystal
lattice is called coordination number.
● In a coordination compound, coordination number depends upon nature of metal atom or ion, and its electronic
configuration.
● In a solid state, the coordination number depends upon the crystalline structure of the unit cell.
9. COORDINATION COMPOUNDS 11
★ Q. 15. What is the coordination number and oxidation state of metal ion in the complex [Pt (NH ) Cl ]\ ?
Ans. Coordination number:6
Oxidation state of Pt:;4. ■
Q. What is the coordination number of (a) Co in [CoCl (en) ]>, (b) Ir in [Ir(C O ) Cl ]> and (c) Pt in
[Pt(NO ) (NH ) ] ?
Ans. (a) Coordination number of Co in [CoCl (en) ]>:6
(b) Coordination number of Ir in [Ir (C O ) Cl ]>:6
(c) Coordination number of Pt in [Pt (NO ) (NH ) ]:4
★ Q. 16. What is the difference between a double salt and a complex ? Give an example. (2 marks) OR
Illustrate with example, the difference between a double salt and a coordination compound (complex).
(2 marks)
(1) Double salts exist only in the solid state and (1) Coordination compounds exist in the solid state as
dissociate into their constituent ions in the aqueous well as in the aqueous or non-aqueous solutions.
solutions.
(2) Double salts lose their identity in the solution. (2) They do not lose their identity completely.
(3) The properties of double salts are same as those of (3) The properties of coordination compounds are
their constituents. different from their constituents.
(4) Metal ions in the double salts show their normal (4) Metal ions in the coordination compounds show
valence. two valences namely primary valence and second-
ary valence satisfied by anions or neutral molecules
called ligands.
(5) For example in K SO . K SO . Al (SO ) . 24H O. (5) In K [Fe(CN) ], ions K> and [Fe(CN) ]\ ions
The ions K>, Al> and SO\ show their properties. show their properties.
■
Remember …
(Textbook page 194)
When a complex is dissolved and a solution is formed, it does not dissociate into simple metal ions. When
[Co(NH ) ]Cl , is dissolved in water it does not give the test for Co> or NH . However, on reacting with AgNO
a curdy white precipitate of AgCl corresponding to 3 moles is observed.
Units
9.4 Classification of complexes
9.4.1 Classification on the basis of types of ligands
9.4.2 Classification on the basis of charge on the complex
9. COORDINATION COMPOUNDS 13
Use your brain power !
(Textbook page 195)
Q. Classify the complexes as homoleptic and heteroleptic : (a) [Co (NH ) Cl]SO , (b) [Co (ONO)(NH ) ]Cl ,
(c) [CoCl (NH )(en) ]> and (d) [Cu (C O ) ]\.
Ans. Homoleptic Complexes : (d) [Cu (C O ) ]\
Heteroleptic Complexes : (a) [Co (NH ) Cl]SO
(b) [Co (ONO)(NH ) ]Cl , (c) [CoCl (NH )(en) ]>
★ Q. 19. What are cationic, anionic and neutral complexes ? Give one example of each. (3 marks)
Ans.
(1) Cationic sphere complexes : A positively charged coordination sphere or a coordination compound having a
positively charged coordination sphere is called cationic sphere complex.
For example : [Zn(NH ) ]> and [Co(NH ) Cl]SO are cationic complexes. The latter has coordination sphere
[Co(NH ) Cl]>, the anion SO \ makes it electrically neutral.
(2) Anionic sphere complexes : A negatively charged coordination sphere or a coordination compound having
negatively charged coordination sphere is called anionic sphere complex. For example, [Ni(CN) ]\ and
K [Fe(CN) ] have anionic coordination sphere; [Fe(CN) ]\ and three K> ions make the latter electrically
neutral.
(3) Neutral sphere complexes : A neutral coordination complex does not possess cationic or anionic sphere.
[Pt(NH ) Cl ] or [Ni(CO) ] are neither cation nor anion but are neutral sphere complexes. ■
Use your brain power !
(Textbook page 195)
Q. Classify the complexes as cationic, anionic or neutral : Na [Fe(CN) ], Co(NH ) Cl ,
Cr(H O) (C O ) \, PtCl (en) and Cr(CO) .
Ans. Cationic complexes : [Co(NH ) ]Cl
Anionic complexes : Na [Fe(CN) ], [Cr(H O) (C O ) ]\
Neutral complexes : Cr(CO) , Pt Cl (en)
★ Q. 20. Is the complex [CoF ] cationic or anionic if the oxidation state of cobalt is ;3 ? (1 mark)
Ans. In the complex, Co carries ;3 charge while 6F\ carry 96 charge. Hence the net charge on the complex is 93.
Therefore it is an anionic complex. ■
9. COORDINATION COMPOUNDS 15
★ Q. 23. Write the formula for tetraamineplatinum(II) chloride. (1 mark)
Ans. Formula of tetraamineplatinum(II) chloride : [Pt(NH ) ]Cl
Table 9.1 : IUPAC names of anionic and neutral ligands
Unit
9.6 Effective Atomic Number (EAN) Rule
9. COORDINATION COMPOUNDS 17
Try this …
(Textbook page 197)
Q. Find out the EAN of (a) [Zn(NH ) ]>
(b) [Fe(CN) ]\
Ans. (a) For the complex ion, [Zn(NH ) ]> :
(b) For the complex ion, [Fe(CN) ]\ :
Atomic number of Zn:Z:30
For Fe, Z:26 (Atomic number)
Charge on metal ion: ;2
X:2 (Due to ;2 charge on Fe)
Number of electrons lost by Zn atom:X:2
Y:12 (Due to 6 CN\ ligands)
Total number of electrons donated by 4NH
EAN:Z9X;Y
ligands:Y:2;4:8
:2692;12
EAN:Z9X;Y
:36
:3092;8
:36
(Note : This is atomic number of the nearest
inert element Kr.)
Q. Do the following complexes follow the EAN rule (a) Cr(CO) , (b) Ni(CO) , (c) Mn(CO) ,
(d) Fe(CO) ?
Ans. (a) Cr(CO) : EAN:Z9X;Y (b) Ni(CO) : EAN:Z9X;Y
:2490;8 :2890;8
:32 :36
(c) Mn(CO) : EAN:Z9X;Y (d) Fe(CO) : EAN:Z9X;Y
:2590;10 :2690;10
:35 :36
Conclusion : (a) Cr(CO) and (c) Mn(CO) do not follow EAN Rule.
2H O:4
(1) [Cr(H O) (NH ) (en)]Cl Cr 24 3 2NH :4 12 2493;12:33
en:4
Units
9.7 Isomerism in coordination compounds
9.7.1 Stereoisomers
9.7.2 Structural isomers
9. COORDINATION COMPOUNDS 19
(B) Structural isomerism is further classified as :
(i) Ionisation isomerism
(ii) Linkage isomerism
(iii) Coordination isomerism
(iv) Solvate (or hydrate) isomerism ■
Q. 32. Define, in coordination compounds : (1) Stereoisomerism (2) Stereoisomers. (1 mark each)
Ans.
(1) Stereoisomerism : The phenomenon of isomerism in the coordination compounds arising due to different spatial
positions of the ligands in the space around the central metal atom or ion is called stereoisomerism.
(2) Stereoisomers : The coordination compounds having same molecular formula but different stereoisomerism
due to different spatial arrangements of the ligand groups in the space around the central metal atom or ion are
called stereoisomers. ■
Q. 33. Define : (1) Geometrical isomerism and (2) Geometrical isomers. (1 mark each)
Ans.
(1) Geometrical isomerism : The phenomenon of isomerism in the heteroleptic coordination compounds with the
same molecular formula but different spatial arrangement of the ligands in the space around the central metal atom
or ion is called geometrical isomerism.
(2) Geometrical isomers : The heteroleptic coordination compounds having same molecular formula but different
geometrical isomerism due to different spatial arrangements of the ligands in the space around the central metal
atom or ion are called geometrical isomers. ■
Q. 34. Define cis and trans isomers in the coordination compounds. (2 marks)
Ans.
(1) Cis-isomer : A heteroleptic coordination compound in which two similar
ligands are arranged adjacent to each other is called cis-isomer. For
example,
Cis-Diamminedichloroplatinum(II)
Trans-Diamminedichloroplatinum(II)
■
Cis-Diamminebromochloroplatinum(II) Trans-Diamminebromochloroplatinum(II) ■
Q. 36. Explain the geometrical isomerism of the octahedral complex of the type [MA B ] with suitable example.
(2 marks)
Ans.
(1) Consider an octahedral complex of a metal M with coordination number six and monodentate ligands a and b
having formula [MA B ].
(2) Cis-isomer is obtained when both the B ligands occupy adjacent (1, 2) positions.
(3) Trans-isomer is obtained when the ligands B occupy the opposite (1, 6) positions.
(4) For example, consider a complex [Co(NH ) Cl ]>. The structures of cis and trans isomers are
(a)
(b)
Fig. 9.1 (a) and (b) : Cis and trans-isomers of [CoCl (NH ) ]> ■
Try this ...
(Textbook page 199)
● Draw structures of cis and trans isomers of [Fe(NH ) (CN) ] 9
9. COORDINATION COMPOUNDS 21
Q. 37. Explain the geometrical isomerism of the octahedral complex of the type [M(AA) B ]n< with a suitable
example. (3 marks)
Ans.
(1) Consider an octahedral complex of metal M with coordination number six and a bidentate ligand AA and
monodentate ligand B having molecular formula [M(AA) B ]n< .
(2) Bidentate ligand AA has two identical coordinating atoms.
(3) Cis-isomer is obtained when two bidentate AA ligands as well as two ‘B’ ligands are at adjacent positions.
(4) Trans-isomer is obtained when two AA ligands and two B ligands are at opposite positions.
(5) For example, consider a complex [Co(en) Cl ]>.
(a)
(b)
Fig. 9.2 (a) and (b) : cis and trans-isomers of [CoCl (en) ]> ■
Q. 38. Explain the geometrical isomerism of the octahedral complex of the type [MA BC] with suitable example.
(3 marks)
Ans.
(1) Consider an octahedral complex of metal M with coordination number six and monodentate ligands A, B
and C.
(2) Cis-isomer is obtained when both the ligands B and C occupy adjacent (1, 2) positions.
(3) Trans-isomer is obtained when the ligands B and C occupy opposite positions.
(4) For example, consider a complex [Pt(NH ) BrCl] of the type [MA BC].
(b)
Q. 39. Define : (1) Optical isomerism (2) Optical isomers. (1 mark each)
Ans.
(1) Optical isomerism : The phenomenon of isomerism in which different coordination compounds having same
molecular formula have different optical activity is called optical isomerism.
(2) Optical isomers : Different coordination compounds having same molecular formula but different optical activity
are called optical isomers. ■
Q. 40. Explain : (1) Plane polarised light (2) Optical activity. (1 mark each)
Ans.
(1) Plane polarised light : A monochromatic light having vibrations only in one plane is called a plane polarised
light. This light is obtained by passing monochromatic light through NICOL prism.
(2) Optical activity : A phenomenon of rotating a plane of a plane polarised light by an optically active substance is
called optical activity. This substance is said to be optically active. ■
Q. 41. Explain : (1) Dextrorotatory substance (2) Laevorotatory substance. (1 mark each)
Ans.
(1) Dextrorotatory substance : An optically active substance which rotates the plane of a plane polarised light to
right hand side is called dextrorotatory or d isomer denoted by d.
(2) Laevorotatory substance : An optically active substance which rotates the plane of a plane polarised light to the
left hand side is called laevorotatory or l isomer and denoted by l. ■
Q. 42. What are the conditions for the optical isomerism in coordination compounds ? (2 marks)
Ans.
(1) Optical isomerism is exhibited by those coordination compounds which possess chirality.
(2) There should not be the presence of element of symmetry which makes the complex optically inactive.
(3) The mirror images of the complex molecule or ion must be non-superimposable with the molecule or ion. ■
9. COORDINATION COMPOUNDS 23
Q. 43. What are enantiomers ? (1 mark)
Ans. Enantiomers : The two forms of the optical active complex molecule which are mirror images of each other
are called enantiomers.
There are two forms of enantiomers, d form and l form. ■
Remember ...
(Textbook page 199)
Our hands are non superimposable mirror images. When you hold your left hand up to a mirror the image
looks like right hand.
Q. 44. Draw diagrams for the optical isomers of a complex, [Co(en) ]>. (2 marks)
Ans. The complex [Co(en) ]> has two optical isomers.
Fig 9.4 : Optically active (cis) and optically inactive (trans) forms of the complex [CoCl (en) ]> ■
(2) Draw (A) enantiomers and (B) cis and trans isomers of [Cr(H O) (OX) ]\ :
(A) Enantiomers :
9. COORDINATION COMPOUNDS 25
Q. 46. When are optical isomers called chiral ? (1 mark)
Ans. When the mirror images of optical isomers of the complex are nonsuperimposable they are said to be chiral.
For example, [Co(en) (NH ) ]>. ■
★ Q. 47. Predict whether the [Cr(en) (H O) ]> complex is chiral. Write structure of its enantiomers.
(2 marks)
Ans. (i) Complex is chiral.
(ii) The following are its enantiomers
(b) [Ru(NH ) Cl ]
Geometric isomers :
Geometric isomers :
9. COORDINATION COMPOUNDS 27
Optical isomers of [Pt(en) ClBr]>
Q. 55. Define : (1) Coordination isomerism (2) Coordination isomers. (1 mark each)
Ans.
(1) Coordination isomerism : The phenomenon of isomerism in the ionic coordination compounds having the same
molecular formula but different complex ions involving the interchange of ligands between cationic and anionic
spheres of different metal ions is called coordination isomerism.
(2) Coordination isomers : The ionic coordination compounds having same molecular formula but different complex
ions due to interchange of ligands between cationic and anionic spheres of different metal ions are called
coordination isomers.
For example, (I) [Co(NH ) ]>[Cr(CN) ]\ and (II) [Cr(NH ) ]>[Co(CN) ]\
(cationic) (anionic) (cationic) (anionic) ■
9. COORDINATION COMPOUNDS 29
Q. 58. Define solvate or hydrate isomers. OR
What are hydrate isomers ? Explain with examples. (2 marks)
Ans. Solvate or Hydrate isomers : The coordination compounds having the same molecular formula but differ in the
number of solvent or H O molecules inside the coordination sphere and outer sphere of the complexes are called
solvate or hydrate isomers.
For example : [Cr(H O) ] Cl ; [Cr(H O) Cl]Cl · H O; and [Cr(H O) Cl ] Cl·2H O. ■
Q. 59. A coordination compound has formula CoCl · 6H O. Write the hydrate isomers of the complex.
(2 marks)
Ans. The possible hydrate isomers of the coordination compounds having molecular formula CoCl · 6H O are
as follows :
(1) [Co(H O) ]Cl ; (2) [Co(H O) Cl] Cl ·H O
(3) [Co(H O) Cl ] Cl· 2H O (4) [Co(H O) Cl ] · 3H O. ■
★ Q. 60. Consider the complexes [Cu(NH ) ] [PtCl ] and [Pt(NH ) ] [CuCl ]. What type of isomerism these two
complexes exhibit ?
Ans. Since in these two given complexes, there is an exchange of ligands between cationic and anionic constituents, they
exhibit coordination isomerism. ■
Units
9.8 Stability of the coordination compounds
9.8.1 Factors which govern stability of the complex
★ Q. 61. How can stability of the coordination compounds be explained in terms of equilibrium constants ?
(2 marks)
Ans. Stability of the coordination compounds : The stability of coordination compounds can be explained on the
basis of their stability constants. The stability of coordination compounds depends on metal-ligand interactions. In
the complex, metal serves as electron-pair acceptor (Lewis acid) while the ligand as Lewis base (since it is electron
donor). The metal-ligand interaction can be realized as the Lewis acid-Lewis base interaction. Stronger the
interaction greater is stability of the complex.
Consider the equilibrium for the metal-ligand interaction :
M a;
;nLx\ & [MLn]a>(9nx)
where a, x, [a;(9nx)] denote the charge on the metal, ligand and the complex, respectively. Now, the
equilibrium constant K is given by
[MLn][a;(9nx)]
K:
[Ma>] [Lx\]n
Stability of the complex can be explained in terms of K. Higher the value of K larger is the thermodynamic
stability of the complex hence K is called stability constant, and denoted by Kstab.
The equilibria for the complex formation with the corresponding K values are given below.
Ag>;2CN\ & [Ag(CN) ]\ K:5.5;10
Cu>;4CN\ & [Cu(CN) ]\ K:2.0;10
Co>;6NH & [Co(NH ) ]> K:5.0;10
From the above data, the stability of the complexes is [Co(NH ) ]> [Cu(CN) ]\ [Ag(CN) ]\. ■
30 NAVNEET CHEMISTRY DIGEST : STANDARD XII (PART II)
★ Q. 62. Name the factors governing the equilibrium constants of the coordination compounds. (2 marks)
Ans. The equilibrium constant of the complex depends on the following factors :
(a) Charge to size ratio of the metal ion : Higher the ratio greater is the stability. For the divalent metal ion
complexes their stability shows the trend : Cu> Ni> Co> Fe> Mn> Cd>. The above stability
order is called Irving-William order. In the above list both Cu and Cd have the charge ;2, however, the ionic
radius of Cu> is 69 pm and that of Cd> is 97 pm. The charge to size ratio of Cu> is greater than that of Cd>.
Therefore the Cu> forms stable complexes than Cd>.
(b) Nature of the ligand : A second factor that governs stability of the complexes is related to how easily the ligand
can donate its lone pair of electrons to the central metal ion that is, the basicity of the ligand. The ligands those are
stronger bases tend to form more stable complexes. ■
Units
9.9 Theories of bonding in complexes
9.9.1 Valence Bond Theory (VBT)
Q. 63. Explain the steps involved in describing the bonding in coordination compounds using valence bond
theory. (3 marks)
Ans.
(1) Vacant d-orbitals of metal ion form coordination bonds with ligands.
(2) s, p orbitals along with vacant d-orbitals of metal ion take part in hybridisation.
(3) The number of vacant hybrid orbitals formed is equal to number of hybridising orbitals which is equal to the
number of ligand donor atoms or coordination number of the metal.
(4) The metal-ligand coordination bonds are formed by the overlap between the vacant hybrid orbitals of metal
and the filled orbitals of the ligands.
(5) The hybrid orbitals used by the metal ion point in the direction of the ligands.
(6) When inner (n91) d orbitals of metal ion are used in the hybridisation then the complex is called (a) inner orbital
complex while when outer nd orbitals are used, complexes are called (b) outer orbital complexes. ■
9. COORDINATION COMPOUNDS 31
Q. 65. What are the salient features of valence bond theory (VBT) ? (3 marks)
Ans. The salient features of valence bond theory (VBT) are as follows :
(1) According to this theory, a central metal atom or ion present in a complex provides a definite number of vacant
orbitals (s, p, d and f ) to accommodate the electrons from the ligands for the formation coordinate bonds with the
metal ion / atom.
(2) The number of vacant orbitals provided by the central metal atom or ion is the same as the coordination number of
the metal. For example : Cu> provides 4 vacant orbitals in the complex. [Cu(NH ) ]>.
(3) The vacant orbitals of metal atom or ion undergo hybridisation forming the same number of hybridised orbitals,
since the bonding with the hybrid orbitals is stronger.
(4) Each ligand has one or more orbitals containing one or more lone pairs of the electrons.
(5) The shape or geometry of the complex depends upon the type of hybridisation of the metal ion / atom.
(6) When inner orbitals namely (n91) d orbitals in transition metal atom or ion hybridise, the complex is called inner
complex and when outer orbitals i.e., nd orbitals hybridise then the complex is called outer complex.
(7) When the central metal atom or ion in the complex contains one or more unpaired electrons the complex is
paramagnetic while if all the electrons are paired, the complex is diamagnetic. ■
★ Q. 66. What is the shape of a complex in which the coordination number of central metal ion is 4. (1 mark)
Ans. A complex with the coordination number of central metal ion equal to 4 may be tetrahedral or square planar.
■
★ Q. 67. What are strong field and weak field ligands ? Give one example of each.
Ans. The ligands are then classified as (a) strong field and (b) weak field ligands. Strong field ligands are those in which
donor atoms are C,N or P. Thus CN\, NC\, CO, HN , EDTA, en (ethylenediammine) are considered to be strong
ligands. They cause larger splitting of d orbitals and pairing of electrons is favoured. These ligands tend to form
low spin complexes. Weak field ligands are those in which donor atoms are halogens, oxygen or sulphur. For
example, F\, Cl\, Br\, l\, SCN\, C O \. In case of these ligands the R parameter is smaller compared to the
energy required for the pairing of electrons, which is called as electron pairing energy. The ligands then can be
arranged in order of their increasing field strength as
I\ Br\ Cl\ S\ F\ OH\ C O \ H O NCS\ EDTA NH en CN\ CO.
■
★ Q. 68. [CoCl ]\ is a tetrahedral complex. Draw its box orbital diagram. State which orbitals participate in
hybridisation. (2 marks)
Ans. Co [Ar] 3d 4s
Oxidation state of Co: ;2
Co> [Ar] 3d 4s
Since Cl\ is a weak ligand, there is no pairing of electrons. Since C.N. is 4, there is sp hybridisation.
Since (en) is a strong field ligand there is pairing of electrons. The electrons occupy the t g orbitals of lower energy.
It has one unpaired electron. Due to d-d transition, it is coloured. ■
Q. 70. What is the spin pairing process in the coordination compound ? (3 marks)
Ans. When the ligands approach the metal atom or ion for the formation of a complex, they influence the valence
electrons of metal atom or ion. Accordingly the ligands are classified as (A) strong ligands and (B) weak ligands.
(A) Strong ligands :
(i) They cause the pairing of unpaired electrons present in the metal atom or ion.
(ii) Spin pairing process :
(a) The process of pairing of unpaired electrons in metal atom or ion due to the presence of ligands in the
complex is called spin pairing process.
(b) This spin pairing process decreases the number of unpaired electrons and hence decreases the
paramagnetic character of the complex.
(c) The strong ligands also promote the outer ns electrons to the vacant inner (n91)d orbitals.
(B) Weak ligands : The weak ligands have no effect on the electrons in the valence shell of a metal atom or ion.
\ , ethylenediammine (en), NH , EDTA, etc.
Strong ligands : CO, CN
Weak ligands : Cl\, I\, OH\, etc.
[Note : If a complex has n number of unpaired electrons then the magnetic moment, is given by ‘spin only’ formula :( n(n;2) B.M.
where B.M. (Bohr Magneton) is the unit of magnetic moment. Hence from the magnitude of , the number of unpaired electrons in the complex
and its structure can be evaluated.] ■
Units
9.9.2 Octahedral complexes
9.9.3 Tetrahedral complexes
9.9.4 Square planar complex
9.9.5 Limitations of VBT
Q. 71. Explain the structure of octahedral complex, [CO(NH ) ]> on the basis of valence bond theory.
(3 marks)
Ans.
(1) Hexaamminecobalt(III) ion, [CO(NH ) ]> is a cationic complex, the oxidation state of cobalt is ;3 and the
coordination number is 6.
(2) Electronic configuration : Co [Ar] 3d 4s
Electronic configuration : Co> [Ar] 3d 4s 4p
3d 4s 4p
Co> (Ground state)
(5) 6 lone pairs of electrons from 6NH ligands are accommodated in the six vacant dsp hybrid orbitals. Thus six
hybrid orbitals of Co> overlap with filled orbitals of NH forming 6 coordinate bonds giving octahedral geometry
to the complex.
Co> NH NH NH NH NH NH
[Co(NH ) ]> ;; ;; ;; ;; ;; ;;
3d dsp hybrid orbitals
Since the complex has all electrons paired, it is diamagnetic.
[Co(NH ) ]>
Q. 72. Explain the geometry of [CoF ]\ on the basis of valence bond theory. (3 marks)
Ans.
(1) Hexafluorocobaltate(III) ion, [CoF ]\ is an anionic complex, the oxidation state of cobalt is ;3 and the
coordination number is 6.
(2) Electronic configuration : Co [Ar] 3d 4s 4p 4d
Electronic configuration : Co> [Ar] 3d 4s 4p 4d
3d 4s 4p 4d
Co> (Ground state)
ZIIIIII spd hybridisation IIIIIIJ
(3) Since F\ is a weak ligand, there is no spin pairing effect and Co> possesses 4 unpaired electrons.
(4) Since the coordination number is 6, the Co> ion gets six vacant orbitals by hybridisation of one 4s orbital, three 4p
orbitals and two 4d orbitals forming six spd hybrid orbitals giving octahedral geometry.
Co>
3d spd hybrid orbitals
[CoF ]\
Q. 73. Explain the structure of tetrachloronickelate(II) [NiCl ]\ on the basis of valence bond theory.
(3 marks)
Ans.
(1) Tetrachloronickelate(II) ion is an anionic complex, oxidation state of Ni is ;2 and the coordination number is 4.
(2) Electronic configuration : Ni [Ar] 3d 4s 4p
Electronic configuration : Ni> [Ar] 3d 4s 4p
3d 4s 4p
Ni> (Ground State)
sp hybridisation
(3) Since the coordination number is 4, it gets 4 vacant hybrid orbitals by sp-hybridisation of one 4s and three
4p orbitals giving tetrahedral geometry to the complex.
Ni>
3d sp hybrid orbitals
(4) As Cl\ is a weak ligand, 2 unpaired electrons in Ni> remain undisturbed.
(5) 4 lone pairs of electrons from 4Cl\ ligands are accommodated in the vacant four sp hybrid orbitals. Thus four
sp hybrid orbitals of Ni> overlap with filled orbitals of Cl\ forming 4 coordination bonds, giving tetrahedral
geometry to the complex.
Ni> Cl\ Cl\ Cl\ Cl\
[NiCl ]\ ;; ;; ;; ;;
3d sp hybrid orbitals
9. COORDINATION COMPOUNDS 35
Magnetic moment is, :(n(n;2):(2(2;2):2.83 B.M.
Q. 74. Explain the structure of [Ni(CN) ]\ on the basis of valence bond theory. (3 marks)
Ans.
(1) Tetracyanonickelate (II) ion, [Ni(CN) ]\ is an anionic complex, oxidation state of Ni is ;2 and the coordination
number is 4.
(2) Electronic configuration : Ni [Ar] 3d 4s 4p
Electronic configuration : Ni> [Ar] 3d 4s 4p
3d 4s 4p
Ni> (Ground state)
(3) Since CN\ is a strong ligand, one of the unpaired electrons in 3d orbital is promoted giving two paired electrons
and one vacant 3d orbital.
3d 4s 4p
Ni> (Excited state)
< dsp hybridisation ;
(4) Since the coordination number is 4, Ni> gets 4 vacant hybrid orbitals by hybridisation of one 3d, one 4s and two
4p orbitals forming four dsp hybrid orbitals. This has square planar geometry.
Ni>
3d dsp hybrid orbitals
(5) 4 lone pairs from 4CN\ ligands are accommodated in the vacant four dsp hybrid orbitals. Thus four dps hybrid
orbitals of Ni> overlap with filled orbitals of CN\ forming 4 coordinate bonds giving square planar geometry to
the complex. It is an inner complex.
Ni> CN\ CN\ CN\ CN\
[Ni(CN) ]\ ;; ;; ;; ;;
3d dsp hybrid orbitals
Since the complex ion has all electrons paired, it is diamagnetic.
4 Tetrahedral sp
6 Octahedral dsp/spd
(Note : The missing entries are underlined.)
Try this …
(Textbook page 204)
Q. Based on the VBT predict structure and magnetic behaviour of the [Ni(NH ) ]> complex.
Ans. Ni [Ar] 3d 4s
Ni> [Ar] 3d 4s
Hybridisation : spd
Geometry : Octahedral
Magnetic property : Paramagnetic
9. COORDINATION COMPOUNDS 37
Units
9.9.6 Crystal field theory (CFT)
9.9.7 Factors affecting Crystal Field splitting parameter ( )
9.9.8 Colour of the octahedral complexes
9.9.9 Splitting of d-orbitals in tetrahedral and octahedral complexes
Q. 76. What are the assumptions of Crystal Field Theory (CFT) ? (3 marks)
Ans. Bethe and van Vleck developed Crystal Field Theory (CFT) to explain various properties of coordination
compounds. The salient features of CFT are as follows :
(1) In a complex, the central metal atom or ion is surrounded by various ligands which are either negatively charged
ions (F\, Cl\, CN\, etc.) or neutral molecules (H O, NH , en, etc.) and the most electronegative atom in them
points towards central metal ion.
(2) The ligands are treated as point charges involving purely electrostatic attraction between them and metal ion.
(3) (i) The central metal ion has five, (n91) d degenerate orbitals namely d , d , d , d(x9y) and dz.
VW WX XV
(ii) When the ligands approach the metal ion, due to repulsive forces, the degeneracy of d-orbitals is destroyed
and they split into two groups of different energy, t g and eg orbitals. This effect is called crystal field splitting
which depends upon the geometry of the complex.
(iii) The d-orbitals lying in the direction of ligands are affected to a greater extent while those lying in between
the ligands are affected to a less extent.
(iv) Due to repulsion, the orbitals along the axes of ligands acquire higher energy while those lying in between the
ligands acquire less energy.
(v) Hence repulsion by ligands give two sets of split up orbitals of metal ion with different energies.
(vi) The energy difference between two sets of d-orbitals after splitting by ligands is called crystal field splitting
energy (CFSE) and represented by or by arbitrary term 10Dq. The value of or 10Dq depends upon the
geometry of the complex.
(4) The electrons of metal ion occupy the split d-orbitals according to Hund’s rule, aufbau principle and those orbitals
with minimum repulsion and the farthest away from the ligands.
(5) CFT does not account for overlapping of orbitals of central metal ion and ligands, hence does not consider covalent
nature of the complex.
(6) From the crystal field stability energy, the stability of the complexes can be known.
Try this …
(Textbook page 202)
Q. Give VBT description of bonding in each of following complexes. Predict their magnetic behaviour.
(a) [ZnCl ]\
(b) [Co(H O) ]> (high spin)
(c) [Pt(CN) ]\ (square planar)
(d) [CoCl ]\ (tetrahedral)
(e) [Cr(NH ) ]>
Ans.
Complex ion Hybridisation Geometry Magnetic property
Q. 79. Explain the factors affecting Crystal Field Splitting parameter ( ). (2 marks)
Ans. Crystal Field Splitting parameter ( ) depends on, (a) Strength of the ligands and (b) Oxidation state of
the metal.
(a) Strength of the ligands : Since strong field ligands like CN\, en, etc. approach closer to the central metal ion, it
results in a large crystal field splitting and hence has higher values.
(b) Oxidation state of the metal : A metal ion with the higher positive charge draws the ligands closer to it which
results in large separation of t g and eg set of orbitals. The complexes involving metal ions with low oxidation state
have low values of . For example [Fe(NH ) ]> has higher than [Fe(NH ) ]>.
■
Q. 80. Explain the octahedral geometry of complexes using crystal field theory. (3 marks)
Ans.
(1) In an octahedral complex [MX ]n<, the metal atom or ion is placed at the centre of regular octahedron while six
ligands occupy the positions at six vertices of the octahedron.
(2) Among five degenerate d-orbitals, two orbitals namely dx9y and dz are axial and have maximum electron density
along the axes, while remaining three d-orbitals namely dxy, dyz and dzx are planar and have maximum electron
density in the planes and in-between the axes.
9. COORDINATION COMPOUNDS 39
(3) Hence, when the ligands approach a metal ion, the orbitals dx9y and dz
experience greater repulsion and the orbitals dxy, dyz and dzx experience less
repulsion.
(4) Therefore the energy of dx9y and dz increases while the energy of dxy, dyz and
dzx decreases and five d-orbital lose degeneracy and split into two point groups.
The orbitals dxy, dyz and dzx form t g group of lower energy while dx9y and dz
form eg group of higher energy.
Thus t has three degenerate orbitals while eg has two degenerate orbitals.
g
(5) Experimental calculations show that the energy of t g orbitals is lowered by
Fig. 9.10 : Octahedral geometry
0.4o or 4Dq and energy of eg orbital is increased by 0.6o or 6Dq. Thus energy
having central metal (M) at the
difference between t g and eg orbitals is or 10Dq which is crystal field
centre and six ligands (L) at the
splitting energy. vertices of the octahedron.
(6) CFSE increases with the increasing strength of ligands and oxidation state of central metal ion. ■
Q. 81. Explain the tetrahedral geometry of complexes using crystal field theory. (3 marks)
Ans.
(1) In the tetrahedral complex, [MX ]n<, the metal atom or ion is placed at the centre of the regular tetrahedron and the
four ligands, are placed at four corners of the tetrahedron.
(2) The ligands approach the central metal atom or ion in-between the three coordinates x, y and z. The orbitals dxy , dyz
and dzx are pointed towards ligands and experience greater repulsion while the axial orbitals dx–y and dz lie
in-between metal –ligand bond axes and experience comparatively less experience.
(a) (b)
Fig. 9.12 (a) and (b) : Tetrahedral geometry having central metal atom (M) at the centre and four ligands (L) at the four corners
(3) Therefore energy of dxy , dyz and dzx orbitals is increased while that of dx-y and dz is lowered. Hence 5d-orbitals lose
their degeneracy and split into two point groups, namely t g of higher energy (dxy, dyzand dzx ) and eg of lower energy
(dx9y and dz ).
9. COORDINATION COMPOUNDS 41
Table 9.5 : d-orbital diagrams for high spin and low spin complexes
d-orbital
High spin Low spin
electronic
configuration
d eg
t
g
d eg
t
g
d eg
t
g
d eg
t
g
(Only the electronic configurations d to d render the high spin and low spin complexes)
Try this...
(Textbook page 206)
Q. Sketch qualitatively crystal field d orbital energy level diagrams for each of the following complexes :
(a) [Ni(en) ]> (b) [Mn(CN) ]\ (c) [Fe(H O) ]>
Predict whether each of the complexes is diamagnetic or paramagnetic.
Ans.
(a) The complex ion, [Ni(en) ]> is octahedral.
Ni [Ar] 3d 4s
Ni> [Ar] 3d 4s
★ Q. 83. Give valence bond description for the bonding in the complex [VCl ]\. Draw box diagrams for free
metal ion. Which hybrid orbitals are used by the metal ? State the number of unpaired electrons. (3 marks)
9. COORDINATION COMPOUNDS 43
Geometry of complex ion:Tetrahedral
The complex ion is paramagnetic. ■
★ Q. 84. (A) Draw qualitatively energy-level diagram showing d-orbital splitting in the octahedral environment.
(B) Predict the number of unpaired electrons in the complex [Fe(CN) ]\. (C) Is the complex diamagnetic
or paramagnetic ? (D) Is it coloured ? Explain. (4 marks)
Ans. (A) d-orbital splitting in the octahedral environment :
Q. 86. Explain the purple colour of the complex, [Ti(H O) ]> with the help of crystal field theory. (3 marks)
Ans.
(1) [Ti(H O) ]> is an octahedral complex, oxidation state of titanium is ;3 (Ti>) and the coordination
number is 6.
(2) Electronic configuration: Ti [Ar] 3d 4s
Electronic configuration:Ti> [Ar] 3d OR
Fig. 9.15 : Photon absorption and the absorption spectrum of [Ti(H O) ]>
(6) The wavelength of the absorbed radiation will be,
hC
: E:h:
Js ms\
hC 6.63;10\;3;10
: :
E 3.99;10\
J / ion
:4.98;10\ m :498 nm
(7) Hence the complex [Ti(H O) ]> absorbs the green radiation of wavelength 498 nm in the visible region and
transmits the complementary purple light. Therefore the complex is purple coloured. ■
Q. 87. An octahedral complex absorbs the radiation of wavelength 620 nm. Find the crystal field splitting energy.
(2 marks)
Ans. Crystal field splitting energy is given by,
Js ms\
hC 6.63;10\;3;10
: E: :
620;10\
m
:3.2;10\ J ■
9. COORDINATION COMPOUNDS 45
Unit
9.10 Applications of coordination compounds
Q. 88. What are the applications of coordination compounds ? (1 mark for each application)
Ans.
(1) In biology : Several biologically important natural compounds are metal complexes which play an important role
in number of processes occurring in plants and animals.
For example, chlorophyll in plants is a complex of Mg> ions, haemoglobin in blood is a complex of iron, vitamin
B is a complex of cobalt.
(2) In medicine : The complexes are used on a large scale in medicine. Many medicines in the complex form are more
stable, more effective and can be assimilated easily.
For example, platinum complex [Pt(NH ) Cl ] known as cisplatin is effectively used in cancer treatment.
EDTA is used to treat poisoning by heavy metals like lead.
(3) To estimate hardness of water :
(1) The hardness of water is due to the presence Mg> and Ca> ion in water.
(2) The strong field ligand EDTA forms stable complexes with Mg> and Ca>. Hence these ions can be removed
by adding EDTA to hard water.
Similarly these ions can be selectively estimated due to the difference in their stability constants.
(4) Electroplating : This involves deposition of a metal on the other metal. For smooth plating, it is necessary to
supply continuously the metal ions in small amounts.
For this purpose, a solution of a coordination compound is used which dissociates to a very less extent. For
example, for uniform and thin plating of silver and gold, the complexes K[Ag(CN) ] and K [Au(CN) ] are used.
■
(Note : Students are supposed to carry out these activity on their own.)
9. COORDINATION COMPOUNDS 49
10. HALOGEN DERIVATIVES
10 HALOGEN DERIVATIVES
CHAPTER OUTLINE
Page No.
.... Important Definitions and Reactions … 51
.... Exercises
!D !D !D !D
Halogen derivatives
!
!D !D !D
!D !D !D
Alkyl halides (Based on halogen atom bonded to sp, sp and sp hybridised carbon)
!
!D !D !D !D !D
X RCOOAg
Alkanes
IIIIIII IIIIIIIIIIJ RX IIIIIIIIIIJ
IIIIIIIIIIIIIIIIIIJ R9COOR Ester
light
Alkyl halide NH
R9NH Amine
IIIIIIIIIIIIIIIIIIJ
HX excess
Alkenes IIIIII
aq. KCN
IIIIIIIIIIIIIIIIIIJ R9CN Alkyl cyanide
Alkyl halide NaI
AgCN
IIIIIIIIIIIJ R9NC Alkyl isocyanide
KO9N:O
IIIIIIIIIIIIIIIIIIIIIJ R9O9N:O Alkyl nitrite
;
Ag9O9N:O O
IIIIIIIIIIIIIIIIIIIIIIIIIIJ R9N 9Nitroalkane
O
Alc. KOH
IIIIIIIIIIIIIIIIIJ Olefins (alkenes)
Mg, ether
IIIIIIIIIIIIIIIIIJ RMgX (Grignard reagent)
Na, dry ether
IIIIIIIIIIIIIIIIIIIIIIJ R9R Higher alkane (Wurtz reaction)
4. Reactions of chlorobenzene :
(ii)
(iii)
Unit
10.1 Classification of halogen derivatives
!D !D
!D !D !D
!D !D
Vicinal Geminal
dihalides dihalides
by three halogen atoms are called trihalogen derivatives. E.g. CHCl , CH 9CH 9CH ,
Cl Cl Cl
(iii) Tetrahalogen derivatives : The compounds formed by the substitution of four hydrogen atoms of an alkane
by four halogen atoms are called tetrahalogen derivatives. E.g. CCl . ■
Unit
10.1.1 Classification of monohalogen compounds
CH C H
° °
CH – C –Br CH – C –CH
CH Cl
tert-butyl bromide tert-pentyl chloride
R
They are represented by the general formula R– C–X (R, R and R may be same or different) ■
R
(2) Allylic halides : In allylic halides, halogen atom is bonded to a sp hybridized carbon atom next to a
carbon-carbon double bond.
Example :
CH :CH9CH 9Br
Allyl bromide
(3) Benzylic halide : In benzylic halides, halogen atom is bonded to a sp hybridized carbon atom which is further
bonded to an aromatic ring.
Example :
(4) Vinylic halides : In vinylic halides, halogen atom is bonded to a sp hybridized carbon atom of aliphatic chain.
Vinylic halide is a haloalkene.
Example : CH :CH9Br
Vinyl bromide
Example :
■
Unit
10.2 Nomenclature of halogen derivatives
(1) CH – Br Bromomethane
(2) CH – CH – Br Bromoethane
(3) CH – CHCl 1,1-Dichloroethane
(4) Cl – CH – CH – Cl 1,2-Dichloroethane
(5) CH Cl Dichloromethane
(6) Cl – CH – CH – CH – Cl 1,3-Dichloropropane
(7) CHCl Trichloromethane
(8) CHI Triiodomethane
CH
(9) (CH ) C – Cl OR CH 9C9Cl 2-Chloro-2-methylpropane
CH
4 3 2 1
(10) CH – CH – CH – CH – Br 1-Bromobutane
1 2 3 4 5
(11) CH – CH – CH – CH – CH 2-Chloropentane
Cl
CH
(12) (CH ) CH – CH – Cl OR CH 9 CH9CH 9Cl 1-Chloro-2-methylpropane
(13) CH – Cl
(13) CH – CH – CH 2-Chloropropane
1 2 3 4 5
(14) CH – CH – CH – CH – CH 3-Bromo-2-chloropentane
Cl Br
(15) CH – CH – CH – CH 2,3-Dichlorobutane
Cl Cl
CH
(23) Tertiary butyl iodide CH 9 C9 I 2-Iodo-2-methylpropane
CH
CH
(24) neo pentyl bromide CH – C–CH –Br 1-Bromo-2, 2-dimethyl propane
CH
(25) CH :CH–Cl Chloroethene
(26) 1,3,5-tribromobenzene
H
(1) Dibromomethane Br9 C9 Br (CH Br )
H
(2) 3-Bromopentane CH – CH – CH – CH – CH
Br
CH – Br
(3) 2-Bromo-2-methylpropane CH – C – CH
CH
CH – Cl
(4) 2,2-Dichloropropane CH – C – CH
Cl
(5) Iodoethane CH – CH – I
(6) 1,1-Dibromopropane CH – CH – CHBr
(7) 1,1,1-Trichloroethane CH – CCl
(8) 1,2-Dichloropropane Cl – CH – CH – CH
Cl
1 2 3 4 5
(9) 1-Bromo-4-methylpentane Br – CH – CH – CH – CH – CH
CH
(10) 2-Chlorobutane CH – CH – CH – CH
Cl
(11) 1,2-Diiodoethane I – CH – CH – I
(12) Tetrachloromethane CCl
(13) 1,2,3-Trichloropropane Cl – CH – CH – CH – Cl
Cl
(14) 1-Iodobutane CH – CH – CH – CH – I
(15) n-Butyl bromide CH – CH – CH – CH – Br
(16) isobutyl bromide CH – CH – CH Br
CH
CH – CH
(17) 1-Chloro-2, 2-dimethylpropane CH – C – CH – Cl
CH
CH – CH
C – CH – CH
C–
5
4 3 2 1
(18) 1-Bromo-2, 2, 4, 4-tetramethylpentane CH – C – CH – C – CH – Br
CH CH
CH – CH
(19) 2-Chloro-2-methylpropane CH – C – CH
Cl
CH – CH
(20) 1-Chloro-3, 3-dimethylbutane CH – C – CH – CH – Cl
CH
CH – CH
C – CH – CH
C–
(21) 1-Iodo-2, 2, 4, 4-tetramethylpentane CH – C – CH – C – CH – I
CH CH
CH – Br
(22) tertiary butyl bromide CH – C – CH
CH
CH – I
(23) isopropyl iodide CH – CH – CH
(24) sec-butyl chloride CH – CH – CH – CH
Cl
CH
(25) 3-Bromo-2-methyl pentane CH –CH –CH– CH–CH
Br
CH C H
(26) 2-Bromo-3-ethyl-2-methyl hexane CH – C—– CH–CH –CH –CH
Br
(28) p-dichlorobenzene
Cl
(29) 1,1,1-trichloroethane CH – C–Cl
Cl
■
Q. 7. Write the structure of –
(a) 3-chloro-3-ethylhex-1-ene (b) 1-Iodo-2, 3-dimethylbutane (c) 1, 3, 5-tribromobenzene (3 marks)
Ans.
Cl
(a) 3-Chloro-3-ethylhex-1-ene : CH – CH – H C– C– CH:CH
CH – CH
CH CH
(b) 1-Iodo-2, 3-dimethylbutane : CH – CH – CH – CH – I
(c) 1, 3, 5-Tribromobenzene :
Q. 9. Write structures of
(a) 2-iodo-3-methyl pentane (b) 3-chlorohexane
(c) 1-chloro-2, 2-dimethyl propane (d) 1-chloro-4-ethyl cyclohexane. (1 mark each)
Ans. (a) H C–HC–CH–H C–CH (b) H C–H C–HC–H C–H C–CH
I CH Cl
2-iodo-3-methyl pentane 3-chlorohexane
CH
(c) H C– C–CH –Cl (d)
CH
1-chloro-2, 2-dimethyl propane
1-chloro-4-ethyl cyclohexane
Q. 10. Write the possible isomers of monochloroderivatives of 2,3-Dimethylbutane and write their IUPAC
names. (2 marks)
Ans. The given parent hydrocarbon has molecular formula, C H . The monochloroderivative of this compound has
molecular formula C H Cl.
The parent hydrocarbon is,
CH 9CH9CH9CH 2,3-Dimethylbutane
CH CH
Hence the structures of isomers of monochloroderivative are,
(1) CH 9CH9CH9CH Cl 1-Chloro-2, 3-dimethylbutane
CH CH
Cl
(2) CH – C 9 CH – CH 2-Chloro-2, 3-dimethylbutane
CH CH
Hence C H Cl has two isomers. ■
Br
(2) CH 9CH9CH 9CH 9CH 2-Bromopentane (2°) Secondary alkyl halide
2°
Br
(3) CH 9CH 9CH9CH 9CH 3-Bromopentane (2°) Secondary alkyl halide
2°
Br
(4) CH 9CH9CH 9CH 1-Bromo-2-methylbutane (1°) Primary alkyl halide
1°
CH
Br
3°
(5) CH 9C9CH 9CH 2-Bromo-2-methylbutane (3°) Tertiary alkyl halide
CH
Br
(6) CH 9CH9CH9CH 2-Bromo-3-methylbutane (2°) Secondary alkyl halide
2°
CH
1°
(7) CH 9CH9CH 9CH 9Br 1-Bromo-3-methylbutane (1°) Primary alkyl halide
CH
CH
1°
(8) CH 9C9CH 9Br 1-Bromo-2, 2-dimethylpropane (1°) Primary alkyl halide
CH
(v) Bromobenzene
Unit
10.3 Methods of preparation of alkyl halides/aryl halides
10.3.1 From alcohol
conc.
ethyl alcohol chloroethane
anhydrous ZnCl
(2) CH 9CH 9CH ; HCl CH 9CH 9CH ; H O
J
conc.
OH Cl
isopropyl alcohol isopropyl chloride
CH CH
tert-butyl alcohol tert-butyl chloride
The order of reactivity of alcohols with a given halo acid is 3°2°1°. ■
Do you know ?
(Textbook page 212)
Zinc chloride is a Lewis acid and consequently can coordinate with the alcohol, weakening R-O bond. Mixture of
concentrated HCl and anhydrous ZnCl is called Lucas reagent.
Q. 13. How are following compounds prepared from alcohols :
(1) ethyl bromide (C H Br) (2) isopropyl bromide (CH 9CHBr9CH )
(3) tert-butyl bromide (CH ) C–Br ? (1 mark each)
Ans.
(1) Ethyl alcohol on heating with conc. hydrobromic acid (48%) forms ethyl bromide. OR
When ethyl alcohol is treated with a mixture of NaBr and H SO , ethyl bromide is formed. Here HBr is generated
in situ.
NaBr;conc. H SO
C H 9OH ; HBr C H 9Br ; H O
IIIIIIIIIIIIIIIIIIIIIIIIJ
(2) Isopropyl alcohol, on reaction with NaBr and dil. H SO forms isopropyl bromide.
NaBr;H SO
CH 9CH 9CH ; HBr CH 9CH9 CH ; H O
IIIIIIIIIIIIIIIIIIJ
conc.
OH Br
isopropyl alcohol isopropyl bromide
(3) Tertiary alcohol on reaction with sodium bromide and dil. H SO forms tert-butyl bromide.
CH CH
NaBr;dil. H SO
CH – C–OH ; HBr CH – C–Br ; H O
IIIIIIIIIIIIIIIIIIIIIIJ
CH CH
tert-butyl alcohol tert-butyl bromide ■
reflux
ethyl alcohol ethyl chloride
(2) Isopropyl chloride (2-chloropropane) from isopropyl alcohol using (i) PCl (ii) PCl (iii) SOCl .
Ans. When isopropyl alcohol is refluxed with phosphorus trichloride, isopropyl chloride is formed.
(i) 3CH –CH–CH ;PCl 3CH –CH–CH ;H PO
IIIIIJ
phosphorus acid
OH Cl
isopropyl alcohol isopropyl chloride
When isopropyl alcohol is refluxed with phosphorus pentachloride, isopropyl chloride is formed.
(ii) CH –CH–CH ;PCl CH –CH–CH ;POCl ;HCl
IIIIIJ
OH Cl
isopropyl alcohol isopropyl chloride
When isopropyl alcohol is refluxed with thionyl chloride, in the presence of pyridine, isopropyl chloride is formed.
The by-products obtained are gases. Therefore, this method is preferred for preparation of alkyl chloride.
pyridine
(iii) CH –CH–CH ;SOCl CH –CH–CH ;SO !;HCl !
IIIIIIIIIJ
reflux
OH Cl
isopropyl alcohol isopropyl chloride
(3) Ethyl bromide (bromoethane) from ethyl alcohol.
Ans. When ethyl alcohol is treated with a mixture of red phosphorus and bromine or hydrobromic acid (phosphorus
tribromide is generated in situ), ethyl bromide is formed.
2P ; 3Br 2PBr
IIIIIJ
3CH CH OH ;PBr 3CH CH Br ; H PO
IIIIIJ
(excess) methyl
methane chloride
(major product)
(2) When excess of chlorine is used, tetrachloro methane, a major product is obtained. When excess of methane is
used, chloromethane, a major product is obtained. The order of reactivity of halogens towards alkane is
F Cl Br I .
UV light
CH ;Cl CH Cl;CH Cl ;CHCl ; CCl ; HCl
or
IIIIIIIIIIIIIIJ
(3) Iodination :
CH ;I & CH –I;HI
methyl iodide
However, iodination reaction is a reversible reaction. HI being a strongest reducing agent reduces methyl iodide
back to methane.
(4) Fluorination : A reaction of alkane with fluorine is explosive and also hydrofluoric acid is poisonous and
corrosive. Hence, alkyl fluorides are not prepared by halogenation of alkane. ■
n-Butane Br
1-Bromobutane (2%)
2-Bromobutane (98%)
(3) Bromination of 2-Methyl propane
CH CH CH
Br
H C9 CH9CH H C9 CH9CH 9Br ; H C9 C9 CH
UV light
IIIIIIIIIIIJ
2-Methylpropane 1-Bromo-2-methylbutane Br
(trace) 2-Bromo-2-methylpropane (over 99%)
■
(excess) Chloroethane
ethane
(2) Bromination of ethane : When ethane is heated with Br in the presence of anhydrous AlBr , bromoethane is
obtained.
Anhydrous AlBr
C H ;Br C H 9Br ; HBr
IIIIIIIIIIIIIIIIIIIIIIJ
ethane Bromoethane
(3) Iodination : When ethane is reacted with I in the presence of suitable oxidising agents like–HgO or HIO or
dilute HNO iodoethane is obtained.
2 C H ;2I ;HgO ; 2C H 9I ; HgI ; H O
ethane
mercuric Iodoethane
oxide
5C H ;2I ;HIO ; 5C H 9I ; 3H O
ethane iodic acid Iodoethane
8C H ;4I ;HNO ; 8 C H 9I ; 3H O ; NH
ethane Iodoethane ■
Q. 19. Explain :
(1) Halogenation of alkanes is not a good method of preparation of alkyl halides. (2 marks)
Ans.
(1) Direct fluorination of alkanes is highly exothermic, explosive and invariably leads to polyfluorination and
decomposition of the alkanes. It is difficult to control the reaction.
(2) Direct iodination of alkanes is highly reversible and difficult to carry out.
(3) In direct chlorination and bromination, the reaction is not selective. It can lead to different isomeric
monohalogenated alkanes (alkyl halides) as well as polyhalogenated alkanes.
Hence, halogenation of alkanes is not a good method of preparation of alkyl halides.
but-2-ene
I 2-iodobutane ■
Isopropyl bromide is the major product, since the negative part (Br\) of HBr is attached to carbon atom of a
double bond with less number of hydrogen atoms. ■
Benzoyl peroxide
Propene 1-Bromopropane ■
Q. 23. Write the structure of alkyl halide obtained by the action hydrogen bromide on 2-Methylprop-
1-ene in the presence of peroxide. (1 mark)
Ans. In the presence of peroxide, HBr to 2-Methyl prop-1-ene forms 1-Bromo-2-methylpropane.
CH CH
(C H CO) O
H C9 C:CH ;H9Br H C9 C9 CH 9Br
IIIIIIIIIIIIIIIIIIIIJ
Benzoyl peroxide
Z-Methylprop-1-ene H
1-Bromo-2-methylpropane ■
(major) (minor)
peroxide
(3) CH 9CH:CH ;HBr ……;……
IIIIIIIIIIIIJ
(major) (minor)
Ans.
2-methyl but-2-ene
Br Br
2-bromo-3-methyl butane 2-bromo-2-methyl butane
(major) (minor)
Do you know ?
(Textbook page 213)
Alkenes form addition product, vicinal dihalide, with chlorine or bromine usually in inert solvent like CCl at room
temperature.
(X:Cl, Br)
Do you know ?
(Textbook page 214)
When alkenes are heated with Br or Cl at high temperature, hydrogen atom of allylic carbon is substituted with
halogen atom giving allyl halide.
CH :CH9CH ;Cl ; CH :CH9CH Cl;HCl
Unit
10.3.3 Halogen exchange
Q. 24. How are alkyl iodides prepared from alkyl chlorides/bromides ? (2 marks)
Ans. Alkyl iodide is prepared by treating alkyl chloride or alkyl bromide with sodium iodide, in the presence of dry
acetone, sodium chloride or sodium bromide precipitates from the solution and can be separated by filtration.
This reaction is known as Finkelstein reaction.
dry ether
RX;NaI IIIIIIIIIIJ RI;NaX
dry acetone
R–Cl ; NaI IIIIIIIIIIIIIIIJ RI ; NaCl
alkyl chloride alkyl iodide
dry acetone
R–Br ; NaI IIIIIIIIIIIIIIIJ RI ; NaBr
alkyl bromide alkyl iodide
dry acetone
C H Br ; NaI C H I ; NaBr
IIIIIIIIIIIIIIIJ
Q. 25. How are alkyl fluorides prepared with alkyl chlorides / alkyl bromides ? (2 marks)
Ans. When alkyl chloride or alkyl bromide is heated with metallic fluorides like AgF, CaF , CoF or Hg F , alkyl
fluoride is formed.
R–X;AgF IIIIIJ R–F;AgX
CH –Cl ; AgF CH F ; AgCl
IIIIIJ
methyl methyl
chloride fluoride
This reaction is known as Swarts reaction. ■
Ortho and para isomers can be easily separated as there is large difference in melting points of ortho and para
isomers. ■
When benzene diazonium salt is mixed with potassium iodide, iodobenzene is formed.
Units
10.4 Physical properties
10.4.1 Nature of intermolecular forces
10.4.2 Boiling point
10.4.3 Solubility
Ans.
(1) In alkyl halide, the halogen atom is more electronegative than carbon atom, the C9X bond is polar.
(2) Though alkyl halide is polar, it is insoluble in water because alkyl halide is not able to form hydrogen bonds with
water. Attraction between alkyl halide molecule is stronger than attraction between alkyl halide and water.
(2) C–F bond in CH F is the strongest bond and C–I bond in CH I is the weakest bond. Explain.
Ans.
(1) Methyl fluoride (CH F) is highly polar molecule and has the shortest C–F bond length (139 pm) and the strongest
C–F bond due to greater overlap of orbitals of the same principal quantum number i.e., overlap of 2sp orbital of
carbon with 2pz orbital of fluorine.
(2) Methyl iodide (CH I) is much less polar and has the longest (C–I) bond length (214 pm) and the weakest C–I bond
due to poor overlap of 2sp orbital carbon with 5pz orbital of iodine i.e., 2sp orbital of carbon cannot penetrate into
larger p-orbitals.
(3) The boiling point of alkyl iodide is higher than that of alkyl fluoride.
Ans. For a given alkyl group, the boiling point increases with increasing atomic mass of the halogen, because magnitude
of van der Waals force increases with increase in size and mass of halogen. Therefore, boiling point of alkyl iodide
is higher than that of alkyl fluoride.
(4) The boiling point of isopropyl bromide is lower than that of n-propyl bromide.
Ans. For isomeric alkyl halides (isopropyl bromide and n-propyl bromide), the boiling point decreases as the branching
increases, surface area decreases on branching and van der Waals forces decrease, therefore, the boiling point of
isopropyl bromide is lower than that of n-propyl bromide.
(5) p-Dichlorobenzene
has m.p. higher than those of o-and m-isomers.
Ans. p-Dichlorobenzene has higher melting point than those of o-and m-isomers. This is because of its symmetrical
structure which can easily fits in crystal lattice. As a result intermolecular forces of attraction are stronger and
therefore greater energy is required to overcome its lattice energy. ■
Do you know ?
(Textbook page 217)
Nicol prism is a special type of prism made from pieces of calcite, a crystalline form of CaCO , arranged in a
specific manner. Nicol prism is also called polarizer.
Q. 33. How many optical isomers are possible for glucose ? (1 mark)
Ans. The number of optical isomers : 16. ■
Remember ...
(Textbook page 217)
The phenomenon of optical isomerism in organic compounds was observed first and its origin in molecular
chirality was recognized later
Q. 34. Draw the structures and indicate the chiral carbon atoms in (1) Lactic acid (2) 2-Chlorobutane.
(2 marks each)
Ans.
*
(1) In lactic acid structure, CH – CH – COOH, the starred carbon atom is chiral carbon atom as it is attached to
the starred OH
four different substituents, COOH, OH, CH and H.
Cl
(2) In 2-chlorobutane structure, CH – CH – CH – CH the starred carbon atom is chiral carbon atom as it is
*
attached to four different substituents, – CH – CH (ethyl), CH (methyl), Cl and H.
(The carbon atom marked with an asterisk (*) is an asymmetric carbon atom.) ■
■
★ Q. 36. Explain optical isomerism in 2-chlorobutane. (3 marks)
Ans.
(1) 2-Chlorobutane contains an asymmetric.
Cl
CH – CH–CH –CH carbon atom (the starred
*
carbon atom) which is attached to four different
groups, i.e., ethyl (– CH – CH ), methyl (CH ),
chloro (Cl) and hydrogen (H) groups.
(2) Two different arrangements of these groups
around the carbon atom are possible as shown in
the figure. Hence, it exists as a pair of enanti-
omers. The two enantiomers are mirror images of
each other and are not superimposable.
(3) One of the enantiomers will rotate the plane of Fig. Enantiomers of 2-Chlorobutane
(with structural and Fischer’s projection formula)
plane-polarized light to the left hand side and is
called the laevorotatory isomer (l-isomer). The
other enantiomer will rotate the plane of plane-polarized light to the right hand side and is called the dextrorotatory
isomer (d-isomer).
Q. 37. Complete the following reactions and explain optical activity of the products formed : (1 mark each)
(i) Pent-1-ene with HBr
Ans. CH –CH –CH –CH:CH ;HBr CH –CH –CH –CH–CH
IIIIIJ
Pent-1-ene Br
2-bromopentane
H
CH –CH –H C– C–CH
Br
2-bromopentane
(Optically active)
(ii) Pent-2-ene with HBr
Ans. CH –CH –CH:CH–CH ;HBr CH –CH –CH–CH –CH
IIIIIJ
Pent-2-ene
Br
3-bromopentane
H
H C–H C– C–CH –CH
Br
3-bromopentane
(Optically inactive) ■
Q. 38. C H (A) on treatment with HCl produced a compound Y. Which is optically active, what is structure A?
(2 marks)
Ans. CH –CH –CH:CH–CH –CH ;HCl CH –CH –CH–CH –CH –CH
IIIIIJ
hex-3-ene Cl
3-chloro hexane
The structure of A:CH –CH –CH:CH–CH –CH
hex-3-ene
Unit
10.5.5 Representation of configuration of molecules
Conventionally the horizontal lines of the cross represent bonds projecting up from the carbon and the vertical lines
represent the bonds going below the carbon. ■
Q. 42. Explain Wedge formula with illustration OR Write a note on Wedge formula. (3 marks)
Ans. Wedge formula : When a tetrahedral carbon is imagined to be
present in the plane of paper all the four bonds at this carbon cannot
lie in the same plane. The bonds in the plane of paper are represented
by normal lines, the bonds projecting above the plane of paper are
represented by solid wedges (or simply by bold lines) while bonds
going below the plane of paper are represented by broken wedges
(or simply by broken lines).
■
CH 9CH9COOH
(1) Draw structures of enantiomers of lactic acid using Fischer projection formulae.
OH
Units
10.6 Chemical properties
10.6.1 Laboratory test of haloalkanes
10.6.2 Nucleophilic substitution reaction of haloalkanes
Q. 43. Give a laboratory test to confirm the presence of halogen in the original organic compound. (1 mark)
Ans. Haloalkanes are of neutral type in aqueous medium. On warming with aqueous sodium or potassium hydroxide the
covalently bonded halogen in haloalkane is converted to halide ion.
R9X;OH*
9
IIIIIJ R9OH;X*
9
When this reaction mixture is acidified by adding dilute nitric acid and silver nitrate solution is added a precipitate
of silver halide is formed which confirms presence of halogen in the original organic compound.
Ag*
;
(aq);X*
9
(aq) IIIIIIIJ AgX (s)
silver halide ■
(aq)
ethyl bromide ethanol
(2) Isopropyl bromide : When isopropyl bromide (2-bromopropane) is boiled with aqueous potassium hydroxide,
isopropyl alcohol is formed.
CH – CH – CH ; KOH boil CH – CH – CH ; KBr
(aq) J
Br OH
isopropyl bromide isopropyl alcohol
(3) Tert-butyl chloride : When tert-butyl chloride is refluxed with aqueous potassium hydroxide, tert-butyl alcohol is
formed.
CH CH
boil
CH – C – Cl ; KOH CH – C – OH ; KCl
J
(aq)
CH CH
tert-butyl chloride tert-butyl alcohol
(4) Methyl bromide : When methyl bromide (bromomethane) is heated with aq. KOH, it is hydrolysed to methyl
alcohol (methanol).
boil
CH – Br ; KOH CH – OH ; KBr
J
(aq)
methyl bromide methyl alcohol
(5) 2-chlorobutane : When 2-Chlorobutane is boiled with aqueous KOH, Butan-2-ol is obtained.
Cl OH
boil
CH – CH – CH – CH ; KOH CH – CH – CH – CH ; KCl
J
Q. 46. Describe the action of sodium ethoxide on (1) ethyl bromide (2) methyl bromide : OR
Write a note on Williamson’s synthesis. (2 marks) OR How are ethers prepared from alkyl halides ?
(2 marks)
Ans. Williamson’s synthesis : When an alkyl halide (R9X) is heated with sodium alkoxide (R9O9Na), an ether
is obtained. In this reaction halide (–X) of alkyl halide is replaced by an alkoxy group (–OR). This reaction is
known as Williamson’s synthesis. This method is used to prepare simple (or symmetrical) ethers and mixed
(or unsymmetrical) ethers.
Sodium alkoxide is obtained by a reaction of sodium with an alcohol.
9 ;
2R9OH ; 2Na 2R9O Na ; H
IIIIIJ
9 ;
E.g. 2C H OH ; 2Na 2 C H O Na ; H
IIIIIJ
(1) Simple (symmetrical) ether : When an alkyl halide and sodium alkoxide having similar alkyl groups are heated,
symmetrical ether is obtained.
R9O9Na ; RX IIIIJ R9O9R ; NaX
e.g., When ethyl bromide is heated with sodium ethoxide, diethyl ether is formed.
When ethyl bromide is heated with sodium methoxide, ethyl methyl ether is formed.
CH –O–Na;C H Br C H –O–CH ;NaBr
IIIIJ
ethyl
Sodium methoxide ethyl methyl ether ■
bromide
Q. 47. What is the action of silver salt of carboxylic acid on alkyl halide ? (1 mark)
Ans. When an alkyl halide (R9X) is heated with silver salt of carboxylic acid (R9COOAg), an ester is obtained.
R9COOAg;RX IIIIIIIIIJ R9COOR;Agx
alcohol
silver salt of Ester
■
carboxylic acid
Q. 48. Describe the action of alcoholic silver acetate on (1) methyl bromide (2) ethyl bromide. (1 mark each)
Ans.
(1) Methyl bromide : When methyl bromide is heated with an alcoholic silver acetate, methyl acetate is formed.
CH – COOAg;CH – Br CH – COO – CH ;AgBr
IIIIIIIIIIJ
alcohol
silver acetate methyl acetate
(2) Ethyl bromide : When ethyl bromide is heated with an alcoholic silver acetate, ethyl acetate is formed.
CH – COOAg ; CH – CH – Br CH – COO9CH 9CH ;AgI
IIIIIIIIIIJ
alcohol
silver acetate ethyl acetate ■
Q. 49. What is the action of alcoholic silver propionate on ethyl bromide ? (1 mark)
Ans. When ethyl bromide is heated with an alcoholic silver propionate, ethyl propionate is formed.
C H –Br;C H COOAg C H –COO–C H ;AgBr ■
IIIIIIIIJ
alcohol
Q. 50. Describe the action of excess of ammonia on (1) ethyl bromide (2) n-propyl bromide. (1 mark each)
Ans.
(1) Ethyl bromide : When ethyl bromide is boiled under pressure with an excess of alcoholic ammonia, ethylamine
(ethanamine) is formed. This is known as ‘ammonolysis’ of ethyl bromide.
413 K
CH – CH – Br ; NH CH – CH – NH ; HBr
IIIIIIIIIIIIJ
pressure
(alc.)
ethyl bromide ethyl amine
(excess)
(2) n-propyl bromide : When n-propyl bromide is boiled under pressure with an excess of ammonia, n-propyl amine
(propanamine) is formed.
pressure
n-propyl bromide (alc.) n-propyl amine
(excess) ■
Q. 51. What is ammonolysis ? Give a suitable example for the reaction. (2 marks)
Ans. When an alkyl halide is boiled under pressure with an excess of alcoholic solution of ammonia (NH ),
corresponding (primary amine) alkyl amine is formed. This reaction is known as ammonolysis of alkyl halide.
pressure
R9X ; NH R9NH ; HX
J
(alc.)
alkyl halide alkyl amine
(excess) (primary amine)
Q. 52. Describe the action of aqueous alcoholic potassium cyanide on (1) ethyl bromide (2) methyl iodide.
(2 marks)
Ans.
(1) Ethyl bromide : When ethyl bromide (bromoethane) is boiled with alcoholic solution of potassium cyanide
in aqueous ethanol, ethyl cyanide (ethyl nitrile) is formed.
boil
CH – CH – Br ; KCN CH – CH – CN ; KBr
J
(alc.)
ethyl bromide ethyl cyanide
(2) Methyl iodide : When methyl iodide is boiled with alcoholic solution of potassium cyanide, methyl cyanide is
formed.
boil
CH –I;KCN CH –CN;KI
IIIIIJ
Q. 53. Describe the action of alcoholic silver cyanide on (1) ethyl bromide (2) methyl chloride. OR
Explain isocyanide reaction of (1) ethyl bromide (2) methyl chloride. (2 marks)
Ans.
(1) Ethyl bromide : When ethyl bromide is heated with alcoholic silver cyanide, ethyl isocyanide is formed.
heat
CH – CH – Br;AgCN CH – CH – NC;AgBr
J
(alc.)
methyl chloride methyl isocyanide
The above reactions (1) and (2) are called isocyanide reaction. ■
Q. 54. Describe the action of potassium nitrite on (i) ethyl bromide. (ii) methyl chloride. (2 marks)
Ans.
(1) Ethyl bromide : When ethyl bromide is treated with potassium nitrite, ethyl nitrite is formed.
;9
CH 9CH 9Br ; K O 9N:O CH 9CH 9O9N:O;KBr
IIIIIJ
(2) Methyl chloride : When methyl chloride is treated with potassium nitrite, methyl nitrite is formed.
;9
CH 9CH 9Cl ; K O 9N:O CH 9 O9N:O;KCl
IIIIIJ
(2) n-Propyl bromide : When n-propyl bromide is treated with silver nitrite, nitropropane is obtained.
Do you know ?
(Textbook page 220)
Cyanide ion is capable of attacking through more than one site (atom).
Such nucleophiles are called ambident nucleophiles. KCN is predominantly ionic (K* ; *
C9 Y N) and provides
cyanide ions. Both carbon and nitrogen are capable of donating electron pair. C9C Bond being stronger than C–N
bond, attack occurs through carbon atom of cyanide group forming alkyl cyanides as major product. However
AgCN (Ag9C Y N) is mainly covalent compound and nitrogen is free to donate pair of electron. Hence attack
occurs through nitrogen resulting in formation of isocyanide.
Another ambident nucleophile is nitrite ion, which can attack through ‘O’ or ‘N’.
Both nitrogen and oxygen are capable of donating electron pair. C9N bond, being stronger than N9O bond,
attack occurs through C atom from alkyl halide forming nitroalkane.
However, sodium nitrite (NaNO ) is an ionic compound and oxygen is free to donate pair of electrons. Hence,
attack occurs through oxygen resulting in the formation of alkyl nitrite.
★ Q. 56. Write structure and IUPAC name of the major product in each of the following reaction. (1 mark each)
Ans. Structure and IUPAC name
Acetone
(1) CH 9CH9CH Cl;NaI CH 9CH9CH I;NaCl
IIIIIIIIIIIIJ
CH CH
1-Iodo-2-methyl propane
1,1-difluoro-2-bromoethane
Peroxide
(3) CH 9CH9CH:CH ;HBr CH 9CH9CH 9CH 9Br
IIIIIIIIIIIIJ
CH CH
1-Bromo-3-methyl butane
(4)
(5)
Q. 59. Explain, the mechanism of alkaline hydrolysis (reaction with aqueous KOH) of tert-butyl bromide
(2-Bromo-2-methylpropane) with energy profile diagram. (4 marks) OR
Explain only reaction mechanism for alkaline hydrolysis of tert-butyl bromide. (2 marks)
Ans.
(i) Consider alkaline hydrolysis of tert-butyl bromide (2-Bromo-2-methylpropane) with aqueous NaOH or KOH.
CH CH
9
CH – C – Br ; OH CH – C – OH ; Br9
IIIIIIJ
CH CH
tert-butyl bromide nucleophile tert-butyl alcohol
(substrate)
(ii) Kinetics of the reaction : Due to steric hindrance of voluminous three methyl groups around carbon, nucleophile
OH9 cannot attack carbon atom directly. Hence, the reaction takes place in two steps.
Step I : This involves heterolytic fission of C9Br covalent bond in the substrate forming carbocation and Br9.
This is a slow process.
CH CH
slow
CH – C – Br CH – C ; ; Br9
RDS
CH CH
Carbonium ion
Step II : This step involves attack of nucleophile OH9 or carbocation forming C9OH bond and product tert-butyl
alcohol. Since it involves ionic charge neutralisation, it is a fast step.
CH CH
fast
; 9
CH – C ; OH CH – C – OH
IIIIIIJ
CH CH
Rate Determining Step (R.D.S.) : Since the first step is a slow step, it is R.D.S., and therefore the rate of the
reaction depends on the concentration of only one reactant, (CH ) C9Br.
Rate:R:k [(CH ) C9Br] where k is a rate constant of the reaction.
SN reaction : The reaction between tert.butyl bromide and hydroxide ion to form tert.butyl alcohol follows
a first – order kinetics. The rate of this reaction depends only on the concentration of one substance (tert-butyl
In this transition state, C9Br bond is partially broken, so that carbon atom carries partial positive charge
(;) and Br carries partial negative charge (9) which further breaks forming carbocation and Br9. Tert-butyl
cation (carbocation) has a planar structure and the CH –C–CH bond angle is 120°. It is the intermediate of the
reaction. It is unstable. In this step, hybridisation of carbon atom changes from sp (tetrahedral geometry) to sp
(planar geometry).
T.S. – II for second step :
In this transition state, C9OH bond is partially formed so that carbon atom carries partial positive charge
(; ) and OH carries partial negative charge (9 ) which further forms tert-butyl alcohol.
Formation of a racemic mixture : Since OH9 has equal probability of the attack on carbocation from
frontside and from backside, the products obtained are equal. In case of optical active alkyl halide, a racemic
mixture is obtained. ■
Q. 60. Discuss SN mechanism of methyl bromide using aqueous KOH. Draw energy profile diagram. OR
Discuss the mechanism of alkaline hydrolysis of methyl bromide or Bromomethane. (4 marks)
Ans.
(1) Consider alkaline hydrolysis of methyl bromide (Bromomethane), CH Br with aqueous NaOH or KOH.
CH 9Br ; OH 9 ; CH 9OH ; Br 9
Bromomethane nucleophile Methanol
substrate
(2) Stereochemistry and Kinetics of the reaction (R.D.S.) : This hydrolysis reaction takes place only in one step
which is a rate determining step i.e. R.D.S. The rate of hydrolysis reaction depends on the concentration of CH Br
and OH 9 which are present in the R.D.S. of the reaction.
Rate:R:k [CH Br] [OH 9 ]
where k is rate constant of the reaction.
n– C H n– C H n– C H
I II
(Racemic mixture)
CH CH
Ans. H9 C9Cl ;OH*
9
IIIIIIIJ HO9 C9H ;Cl 9
C H C H
Unit
10.6.4 Factors influencing SN1 and SN2 mechanism
Q. 61. Discuss the factors influencing SN1 and SN2 mechanism. (4 marks)
Ans.
(1) Nature of substrate : SN2 : The transition state (T.S.) of SN2 mechanism < is pentacoordinate, it is crowded. As a
result SN2 mechanism is favoured in primary halides and least favoured in tertiary halides.
SN1 : A planar carbocation intermediate is formed in SN1 reaction. Bulky alkyl groups can be easily accommodated
in planar carbocation and it has no steric crowding. As a result SN1 mechanism is favoured in tertiary halides and
least favoured in primary halides.
The carbocation intermediate is stabilized by;effect of alkyl substituents and also by hyperconjugation
effect of alkyl substituents containing -hydrogens. As a result, SN1 mechanism is favoured in tertiary halides and
least favoured in primary halides.
SN1 rate increases
CH 9X
IIIIIIIIIIIIIIIIIIIIIIIIIJ
1° 2° 3°
ZIIIIIIIIIIIIIIIIIIIIII
Do you know ?
(Textbook page 224)
1. A negatively charged nucleophile is more powerful than its conjugate acid. For example, R9O*
9
is better
nucleophile than R9OH.
2. When donor atoms are from same period of periodic table, nucleophilicity decreases from left to right in a
period. For example, H O is less powerful nucleophile than NH .
3. When donor atoms are from same group of the periodic table, nucleophilicity increases down the group. For
example, 1*
9
is better nucleophile than Cl*
9
.
(3) Reaction rate Depends upon concentration of one reacting Depends upon concentration of two
species reacting species
(4) Attack of a nucleo- Back side attack and front side attack on a Only back side attack on a substrate
phile substrate with equal probability
(5) Transition state Two steps, two transition states One step, one transition state
(6) Type of substrate Mainly tertiary (3°) substrate Mainly primary (1°) substrate
(7) Stereochemistry 50% inversion and 50% retention of configur- 100% inversion of configuration
ation
(10) Energy of activation Two values of energies of activation One value of energy activation
Q. 63. How does relative reactivity for alkaline hydrolysis with respect to SN2 and SN1 vary in the following alkyl
halides :
(1) Bromomethane (2) Bromoethane (3) 2-Bromopropane (4) 2-Bromo-2-methylpropane ?
(2 marks each)
Ans.
(A) Relative reactivity for SN2 mechanism decreases in the order of :
Bromomethane Bromoethane 2-Bromopropane 2-Bromo-2-methyl propane
CH
CH Br CH 9CH 9Br CH 9CHBr9CH CH – C – Br
CH
(B) Relative reactivity for SN1 mechanism decreases in the order of :
2-Bromo-2-methylpropane 2-Bromopropane Bromoethane Bromomethane
CH
CH – C – Br CH 9CHBr9CH CH 9CH 9Br CH Br
CH
■
Q. 65. Which one of the following is more easily hydrolysed in SN1 and SN2 reaction by aqueous KOH,
C H CHCl C H and C H CH Cl ? (1 mark each)
Ans. In SN1 reaction C H CHCl C H will be more easily hydrolysed than C H CH Cl
In SN2 reaction C H CH Cl will be more easily hydrolysed than C H CHCl C H . ■
★ Q. 66. Which one compound from the following pairs would undergo SN2 faster ? (2 marks)
(1)
(2) CH CH CH I and CH CH CH Cl
Ans.
(1) Since is a primary halide it undergoes SN2 reaction faster than .
(2) Since iodine is a better leaving group than chloride, 1-iodo propane (CH CH CH I) undergoes SN2 reaction faster
than 1-chloropropane (CH CH CH Cl). ■
Q. 67. Choose the member that will react faster than the following pairs by SN1 mechanism. (2 marks each)
(1) 1-bromo-2, 2-dimethyl propane or 2-bromopropane.
CH
CH – C— CH –Br CH – CH–CH
CH Br
1-bromo-2, 2-dimethyl propane 2-bromopropane
Ans. The reactivity of SN1 reaction depends on the steric hindrance, in 2-bromopropane, -carbon atom is attached to
two methyl groups suffers greater steric hindrance to nucleophilic attack than 1-bromo-2, 2-dimethyl propane.
Hence, 2-bromopropane react faster by SN mechanism.
(2) 2-Iodo-2-methyl butane or 2-iodio-3-methyl butane.
CH CH
CH –CH – C–CH CH – CH–CH–CH
I I
2-Iodo-2-methyl butane 2-Iodo-3-methyl butane
★ Q. 68. Observe the following and answer the questions given below :
;
*
CH :CH9 X:* 9
CH 9CH:X:
(1) Name the type of halogen derivative
(2) Comment on the bond length of C9X bond in it
(3) Can react by SN1 mechanism ? Justify your answer.
Ans.
(1) Vinyl halide
(2) C9X bond length shorter in vinyl halide than alkyl halide. Vinyl halide has partial double bond character due to
resonance.
In vinyl halide, carbon is sp hybridised. The bond is shorter and stronger and the molecule is more stable.
(3) Yes, It reacts by SN1 mechanism. SN1 mechanism involves formation of carbocation intermediate. The vinylic
carbocation intermediate formed is resonance stabilized, hence SN mechanism is favoured. ■
Unit
10.6.5 Elimination reaction : Dehydrohalogenation
(alc.)
For example,
CH 9CH 9Br ; KOH H C:CH ;KBr;H O
J
CH – C– CH ; KOH CH – C:CH ;KBr;H O
(alc.)
IIIIIJ
isobutylene
Br
Remember ...
(Textbook page 225)
The carbon bearing halogen is commonly called -carbon (alpha carbon) and any carbon attached to -carbon is
-carbon (beta carbon). Hydrogens attached to
-carbon are
-hydrogens.
(2) n-Propyl bromide : When n-propyl bromide is heated with alcoholic potassium hydroxide, propene is formed.
heat
CH –CH –CH –Br;KOH CH – CH:CH ;KBr;H O
J
(3) Isopropyl bromide : When isopropyl bromide (2-bromopropane) is boiled with alcoholic potassium hydroxide,
propene is formed.
heat
CH – CH – CH ; KOH CH – CH:CH ; KBr ; H O
J
(alc.) propene
Br
isopropyl bromide
(4) Tert-butyl chloride : When tert-butyl chloride (2-chloro-2-methyl propane) is heated with alcoholic KOH,
2-methyl propene is formed.
CH CH
heat
CH – C – Cl;KOH
CH – C :CH ;KBr;HO
J
2CH – CH – CH –CH ;2KOH H C–CH:CH–CH ;H C:CH–CH –CH ;2KBr;2H O
IIIIJ
Do you know ?
(Textbook page 225)
Elimination versus substitution :
Alkyl halides undergo substitution as well as elimination reaction. Both reactions are brought about by basic
reagent, hence there is always a competition between these two reactions. The reaction which actually
predominates depends upon following factors.
(a) Nature of alkyl halides : Tertiary alkyl halides prefer to undergo elimination reaction whereas primary alkyl
halides prefer to undergo substitution reaction.
(b) Strength and size of nucleophile : Bulkier electron rich species prefers to act as base by abstracting proton,
thus favours elimination. Substitution is favoured in the case of comparatively weaker bases, which prefer to
act as nucleophile.
(c) Reaction conditions : Less polar solvent, high temperarture favours elimination whereas low temperature,
polar solvent favours substitution reaction.
Cl
(A) (B)
2-methyl propene tert.butyl chloride
CH CH
CH 9 C9CH ;aq.KOH H C9 C9CH
IIIIIIIIJ
Cl OH
(B) tert. butyl alcohol
(C)
CH CH CH
A:CH 9 C:CH B:CH 9 C9CH C:CH 9 C9OH
Cl CH
★ (2) Complete the following reaction sequences by writing the structural formulae of the organic compounds
‘A’, ‘B’ and ‘C’.
alc.KOH
(1) 2-Bromobutane IIIIIIIIIIIIIJ A IIIIIIIIIIIIJ B IIIIIIIIIIIIJ C (3 marks)
Br NaNH
(2) Isopropyl alcohol IIIIIIIIIJ A IIIIIIIIIIIIIIIJ B (2 marks)
PBr NH excess
Ans.
alc. KOH
(1) CH 9CH9CH 9CH CH 9CH:CH9CH ;CH 9CH 9CH:CH ;2KBr;2H O
IIIIIIIIIIIIIIJ
80% 20%
Br
But-2-ene But-1-ene
2-Bromobutane
(A)
Br Br
2,3-Dibromobutane
(B)
Br Br NH NH
2,3-diaminobutane
(C)
A:CH 9CH:CH9CH
B:CH 9CH9CH9CH C:CH 9CH9CH9CH
Br Br NH NH
94 NAVNEET CHEMISTRY DIGEST : STANDARD XII (PART II)
NH
(2) CH 9CH9CH CH 9CH9CH CH 9CH9CH
IIIIIIIIIIIJ IIIIIIIIIIIJ
PBr excess
OH Br NH
(A) (B)
isopropyl bromide isopropyl amine
CH 9CH 9CH 9Br;aq. KOH CH 9CH 9CH 9OH;KBr
IIIIIIIJ
Propan-1-ol
alc.
CH 9CH 9Br;KCN CH 9CH 9CN;KBr
IIIIIIIIJ
Propane nitrile
Butan-1-ol
red P/I
3CH 9CH 9CH 9CH 9OH;PI 3CH 9CH 9CH 9CH I;H PO
IIIIIIIIIIIIJ
n-butyl iodide
Ans. CH 9CH9CH ;alc.KOH CH 9CH:CH ;KCl;H O
IIIIIJ
Propene
Cl
Propan-1-ol
(6) tert. butyl bromide to isobutyl bromide. (2 marks)
CH CH
Ans. CH 9 C9 Br;alc.KOH CH 9 C:CH ;KBr;H O
IIIIIIIJ
2-Methyl prop-1-ene
CH
tert. butyl bromide
CH CH
Peroxide
CH 9 C:CH ;HBr CH 9 C9CH Br
IIIIIIIIIIIIJ
isobutyl bromide
Propene 1-bromopropane
CH 9CH 9CH 9Br;AgNO CH 9CH 9CH 9NO ;AgBr(s)
9NaCl
IIIIIIIIIJ
1-nitropropane ■
Unit
10.6.6 Reaction with active metals
R 9 Mg 9 X
alkyl halide alkyl magnesium halide
When an alkyl halide like CH I is added from a dropping funnel to a flask containing pieces of pure Mg in pure
and dry ether (diethyl ether) and a trace of iodine, Grignard reagent, CH 9Mg9I is formed.
dry ether \ > \
\ > \
CH 9I ; Mg CH 9 Mg 9 I OR ( CH 9 Mg9 I )
IIIIIIIIIIIJ
Ethyl iodide when treated with magnesium in presence of dry ether forms ethyl magnesium iodide.
dry ether \ 2
> \
C H I;Mg C H –Mg–I OR ( C H 9 Mg9 I )
IIIIIIIIIIIJ
ethyl magnesium
iodide ■
Do you know ?
(Textbook page 226)
Carbon-magnesium bond in Grignard reagent is a polar covalant bond. The carbon pulls electrons from the
electropositive magnesium. Hence carbon in Grignard reagent has negative polarity and acts as a nucleophite.
Victor Grignard received Nobel Prize in 1912 for synthesis and study of organomagnesium compounds. Grignard
reagent is a very versatile reagent used by organic chemist. Vinyl and aryl halides also form Grignard reagent.
Q. 78. Describe the action of water on (1) methyl magnesium iodide (2) ethyl magnesium iodide. (2 marks)
Ans.
(1) Methyl magnesium iodide : When methyl magnesium iodide is treated with water, methane is obtained
OH
CH 9Mg9I;H9OH CH ;Mg
IIIIIIJ
I
Methane
(2) Ethyl magnesium iodide : When ethyl magnesium iodide is treated with water, ethane is obtained.
OH
CH 9CH 9Mg9I;H9OH CH 9CH ;Mg
I
IIIIIIIJ
Ethane ■
NH
ammonia Ethane
(2) n-Propyl magnesium chloride : When n-propyl magnesium chloride is treated with ammonia, propane is formed.
Br
CH 9CH 9CH 9Mg9Br;H9NH CH 9CH 9CH ;Mg
IIIIIIIJ
NH
ammonia Propane ■
Q. 80. Explain Wurtz reaction. (2 marks) OR Explain the action of sodium with alkyl halides. (2 marks)
Ans.
(1) When an alkyl halide is treated with metallic sodium in dry ether, the corresponding higher alkane is formed. This
is called Wurtz reaction or Wurtz coupling reaction.
ether
R – X ; 2Na ; X – R IIIIIIIJ R – R ; 2NaX
alkane
(2) In this reaction the alkyl radicals from two molecules of the reacting alkyl halide combine or couple to form the
higher alkane.
(3) Thus, methyl bromide reacts with sodium in ether to form ethane (C H ), while ethyl bromide under the same
conditions forms n-butane (C H ).
ether
2 CH – Br ; 2Na CH – CH ; 2NaBr
IIIIIIIIJ
Unit
10.6.7 Reaction of haloarenes
Q. 81. Explain the reaction of haloarene with alkyl halide and sodium metal. OR
Write a note on Wurtz–Fittig reaction. (2 marks)
Ans. When an alkyl halide and an aryl halide is treated with sodium metal in dry ether the corresponding alkylarene
(alkyl benzene) is formed. The reaction is known as Wurtz-Fittig reaction. This reaction allows alkylation of alkyl
halides.
Ans. Due to partial double bond character in chlorobenzene, the bond cleavage in chlorobenzene is difficult and
are less reactive. Hence, during the conversion of chlorobenzene to phenol by aq. NaOH requires high
temperature & high pressure.
Ans.
Remember ...
(Textbook page 228)
The 9I effect of Cl is more powerful than its ;R effect. Therefore Cl is o-/p- directing but ring deactivating
group.
The resonance structure (III) shows that the electron withdrawing nitro group (9NO ) in the p-position
extends the conjugation. As a result, the intermediate carbanion is better stabilized which favours nucleophilic
substitution reaction.
(2) Nitration : When chlorobenzene is heated with nitrating mixture (conc. nitric acid;conc. sulphuric acid) a
mixture of 1-chloro-4-nitro benzene (major product) and 1-chloro-2-nitrobenzene is formed.
(3) Sulphonation : When chlorobenzene is heated with concentrated sulphuric acid, a mixture of 4-chlorobenzene
sulphonic acid (major product) and 2-chlorobenzene sulphonic acid is formed.
(2) Acetyl chloride in the presence of anhydrous AlCl : When chlorobenzene is reacted with acetyl chloride in the
presence of anhydrous AlCl , a mixture of 2-chloro acetophenone and 4-chloro acetophenone (major product) is
formed. Since, the acetyl group is introduced in the benzene ring, the reaction is termed as Friedel Craft’s acylation.
Q. 87. Give reasons : ★ (1) Haloarenes are less reactive than haloalkanes. (3 marks)
Ans. Haloarenes (Aryl halides) are less reactive than (alkyl halides) haloalkanes due to the following reasons :
(1) Resonance effect : In haloarenes, the electron pairs on halogen atom are in conjugation with -electrons of the
benzene ring. The delocalization of these electrons C-Cl bond acquires partial double bond character.
Due to partial double bond character of C-Cl bond in aryl halides, the bond cleavage in haloarene is difficult and
are less reactive. On the other hand, in alkyl halides, carbon is attached to chlorine by a single bond and it can be
easily broken.
(2) Aryl halides are stabilized by resonance but alkyl halides are not. Hence, the energy of activation for the
displacement of halogen from aryl halides is much greater than that of alkyl halides.
Due to partial double bond character of C-Cl bond in aryl halides, the bond cleavage in haloarene is difficult
and are less reactive towards nucleophilic substitution.
(2) Sp hybrid state of C : Different hybridization state of carbon atom in C-X bond : In aryl halides, the carbon of
C-X bond is sp-hybridized with more s-character and shorter bond length of 169 pm which requires more energy
to break C-X bond. It is difficult to break a shorter bond than a longer bond, in alkyl chloride (bond length 178 pm)
therefore, aryl halides are less reactive towards nucleophilic substitution reaction.
(3) Instability of phenyl cation : In aryl halides, the phenyl cation formed due to self ionisation will not be stabilized
by resonance which rules out possibility of SN1 mechanism. Also backside attack of nucleophile is blocked by the
aromatic ring which rules out SN2 mechanism. Thus cations are not formed and hence aryl halides do not undergo
nucleophilic substitution reaction easily.
(4) As any halides are electron rich molecules due to the presence of -bond, they repel electron rich nucleophilic.
attack. Hence, aryl halides are less reactive towards nucleophilic substitution reactions. However, the presence of
electron withdrawing groups at o/p position activates the halogen of aryl halides towards substitution.
The attack of electrophile (Y) on haloarenes at ortho and para positions are more stable due to formation of
chloronium ion. The chloronium ion formed is comparatively more stable than other hybrid structures of
carbonium ion.
★ (4) Reactions involving Grignard reagent must be carried out under anhydrous condition. (2 marks)
Ans.
(1) Grignard reagent (R Mg X) is an organometallic compound. The carbon-magnesium bond is highly polar and
magnesium halogen bond is in ionic in nature. Grignard reagent is highly reactive.
(2) The reactions of Grignard reagent are carried out in dry conditions because traces of moisture may spoil the
reaction and Grignard reagent reacts with water to produce alkane. Hence, reactions involving Grignard reagent
must be carried out under anhydrous condition.
★ (5) Alkyl halides are generally not prepared by free radical halogenation of alkane. (2 marks)
Ans.
(1) Free radical halogenation of alkane gives a mixture of all different possible Monohaloalkanes as well as
polyhalogen alkanes.
(2) In this method, by changing the quantity of halogen the desired product can be made to predominate over the other
products. Hence, alkyl halides are generally not prepared by free radical halogenation of alkane. ■
HBr alc.KOH
Ans. CH 9CH :CH CH 9CH 9CH 9Br CH 9CH:CH ;KBr;H O
Peroxide
IIIIIIIIIIIJ IIIIIIIIIIIIJ
(A) (B)
1-Bromopropane Propene
(major product)
A:CH 9CH 9CH 9Br
B:CH 9CH:CH
OH
OH OH OH
(A) (B)
CH
CH CH CH
Na/dry ether
Ans. CH 9 C9 CH 9Cl CH 9 C9 CH 9CH 9 C9 CH
IIIIIIIIIIIIIIIJ
CH CH CH
(A)
2,2,5,59tetramethylhexane
CH CH
A:CH 9 C9 CH 9CH 9 C9 CH
CH CH
(4) (1 mark)
Ans.
Q. 89. Name the reagent used to bring about the following conversions.
★ (1) Bromoethane to ethoxyethane ★ (2) 1-Chloropropane to 1 nitropropane ★ (3) Ethyl bromide to ethyl
isocyanide ★ (4) Chlorobenzene to biphenyl (5) Ethyl iodide to ethyl magnesium iodide (6) Ethyl chloride to
ethyl iodide (7) Toluene to a mixture of ortho and para bromo toluene. (1 mark each)
(1) Bromoethane IIIIIIIIIIIIIIIIIIIJ ethoxy ethane
Sodium alkoxide
Silver nitrite
(2) 1-Chloropropane IIIIIIIIIIIIIIIIIIIJ 1-nitropropane
alcohol
Alcohol
(3) Ethyl bromide IIIIIIIIIIIIIIIIIIIJ Ethyl isocyanide
AgCN
Na
(4) Chlorobenzene IIIIIIIIIIIIIIIIIIIJ Biphenyl
dry ether
Mg
(5) Ethyl iodide IIIIIIIIIIIIIIIIIIIJ Ethyl magnesium iodide
dry ether
NaI
(6) Ethyl chloride IIIIIIIIIIIIIIIIIIIJ Ethyl iodide
acetone
Fe
(7) Toluene;Br ortho and para bromo toluene
IIIIIIIIIIIIIIIIIIIJ
dark
1-chlorobutane butan-1-ol
1-chlorobutane butan-1-ol
red P;I
(ii) 3CH –CH –CH –CH –OH;PI 3–CH –CH –CH –CH –I;H PO
IIIIIIIIIIIIIJ
butan-1-ol 1-iodobutane
Product : C H
n-octane
1-chloropropane propan-1-ol
Product : Propan-1-ol
Ans. Product :
Peroxide
(2) C H –CH:CH ;HBr C H –CH –CH –Br
IIIIIIIIIIIJ
CH CH CH
(3) CH – C: C–CH ;HBr CH – C–CH –CH
IIIIIJ
2,3-dimethyl but-2-ene Br
2-Bromo-2-methyl butane
(Product)
Br
2-Methyl but-2-ene 2-Bromo-3-methyl butane
(Product)
(5)
(1)
Ans.
(2)
Ans.
Na C H Br
(3) C H OH A B.
IIIIIJ IIIIIIIIIIJ
C H Br
Ans. 2C H OH;2Na C H ONa C H OC H ;NaBr
IIIIIIJ IIIIIIIIIIJ
–H
(A) C H ONa (B) C H OC H
Sodium ethoxide Diethyl ether
Ag C H Br
(4) CH COOH A B.
IIIIIJ IIIIIIIIIIJ
Ans. 2CH OOH;2Ag CH COOAg ; C H Br CH COOC H ;AgBr
IIIIIIJ IIIIJ
–H
(A) CH COOAg (B) CH COOC H
silver acetate ethyl acetate
Cl
Ans. 2CH –CH –CH –Cl;2Na C H C H Cl
–2NaCl\
IIIIIIIIIIJ IIIIIIJ
(A) C H (B) C H Cl
n-Hexane n-Hexyl chloride
HBr alc. KOH
(6) CH –CH:CH A B.
IIIIIIJ IIIIIIIIIIIIIJ
alc. KOH
Ans. CH –CH:CH ;HBr CH –CH–CH CH –CH:CH ;KBr
IIIIIJ IIIIIIIIIIIIJ
Br
(A) CH –CH–CH (B) CH –CH:CH
propene
Br
isopropyl bromide ■
Column I Column II
(1) CH 9CH9CH (a) vinyl halide Ans. (1) CH 9CH9CH – (b) alkyl halide
(b) alkyl halide
X X
(c) allyl halide
(2) CH :CH9CH X (2) CH :CH9CH X – (c) allyl halide
(d) benzyl halide
(3) CH :CH9X (3) CH :CH9X – (a) vinyl halide
(e) aryl halide
■
Units
10.7 Uses and environmental effects of some polyhalogen compounds
10.7.1 Uses of some polyhalogen compounds
Do you know ?
(Textbook page 230)
How do CFC destroy the ozone layer in the atmosphere ?
When ultraviolet radiation (UV) strikes CFC (CFC13) molecules in the upper atmosphere, the carbon-chlorine
bond breaks and produces highly reactive chlorine atom (Cl).
This reactive chlorine atom decomposes ozone (O ) molecule into oxygen molecule (O ).
O ;Cl O ;ClO
IIIIIJ
ClO;O O ;Cl
IIIIIJ
Do you know ?
(Textbook page 230)
DDT, the first chlorinated organic insecticides, was originally prepared in 1873, but it was not until 1939 that
Paul Muller of Geigy Pharmaceuticals in Switzerland discovered the effectiveness of DDT as an insecticide. Paul
Muller was awarded the Nobel Prize in Medicine and Physiology in 1948 for this discovery. The use of DDT
increased enromously on a worldwide basis after World War II, primarily because of its effectiveness against the
mosquito that spreads malaria and lice that carry typhus. Many species of insects developed resistance to DDT, and
it was also discovered to have a high toxicity towards fish. DDT is not metabolised very rapidly by animals;
instead, it is deposited and stored in the fatty tissues. The use of DDT was banned in the United States in 1973,
although it is still in use in some other parts of the world.
Ans.
(1) Dichloromethane (CH Cl ) :
(1) Higher levels of dichloromethane in air causes nausea, numbness in fingers and toes, dizziness.
(2) Lower levels of dichloromethane causes impaired vision and hearing.
(3) Direct contact with eyes can damage cornea.
(2) Trichloromethane or chloroform (CHCl ) :
(1) When chloroform is exposed to air in the presence of sunlight, it slowly oxidised to phosgene, a poisonous
compound, therefore it is stored in dark, amber coloured bottles.
(2) Chloroform vapour when inhaled for a short time causes dizziness, headache and fatigue and if inhaled for a
long time affects central nervous system.
(3) Tetrachloromethane or carbon tetrachloride (CCl ) :
(1) Exposure to carbon tetrachloride causes eye irritation, damages nerve cells, vomiting sensation, dizziness,
unconciousness or death. Long exposure to chloroform may affect liver.
(2) When mixed with air it causes depletion of the ozone layer, which affects human skin leading to cancer.
(4) Iodoform (CHI ) : Iodoform has a strong smell. It causes irritation to skin and eyes. It may cause respiratory
irritation or breathing difficulty, dizziness, nausea, depression of central nervous system, visual disturbance.
(5) Freons (CCl F , CCl F, CHClF ) :
(1) Freon as refrigerant causes ozone depletion.
(2) Freons have low toxicity and low biological activity.
(3) Freons from propane group are more toxic in nature.
(4) Regular large inhalation of freon results in breathing problems, organ damage, loss of consciousness.
(6) DDT :
The major product of the above reaction is, (c) Free radical fluorination
(a) I9CH 9CH:CH
(d) Sandmeyer’s reaction
(b) CH 9CH 9CH I
★ 5. Identify the chiral molecule from the following :
(c) CH 9CH 9CH
(a) 1-Bromobutane
I
(b) 1, 1-Dibromobutane
(d) CH 9CH 9CH
(c) 2, 3-Dibromobutane
I OH (d) 2-Bromobutane
(a) 6 (b) 8 (c) 10 (d) 7 (c) Gatterman’s reaction (d) Fittig reaction
52. Which of the following carbocations is least stable ?
41. The lowest stability of carbocation among the
(a) CH 9CH 9CH 9CH
compounds
(a) CH 9CH 9 C>
CH 9CH
(b) CH 9CH 9>CH9CH 9CH
114 NAVNEET CHEMISTRY DIGEST : STANDARD XII (PART II)
chloride with KCN 8. (c) 2-iodo-2-methyl butane
(c) CH 9CH 9>CH
(d) CH 9CH 9>CH9H 9. (d) 10. (b) chloroform 11. (c) both
the substrate and the reagent 12. (b) the inversion of
(d) CH 9CH 9>CH9C9CH
configuration 13. (b) SN2 14. (b) Complete inver-
CH sion of configuration 15. (b) Ammonium ion
16. (d) benzyl chloride 17. (d) ClCH –CH:CH
53. But-1-ene on reaction with HCl in the presence of
sodium peroxide yields 18. (b) 3° 2° 1° 19. (c) n-butane 20. (d) All of
(a) n-butyl chloride (b) isobutyl chloride these 21. (c) isopropyl alcohol 22. (d) 8
(c) secondary butyl chloride (d) tertiary butyl chloride 23. (a) equal amount of d and l isomers
54. Carbon tetrachloride is used as 24. (c) n-propyl iodide 25. (c) sec-butyl chloride
Na
D 30. (b) CH F CH Cl CH Br CH I
IIIIIIJ
Ether
31. (c) optically inactive 32. (c) 4 33. (b) planar
(a) 2, 2-dimethyl butane (b) 2, 3-dimethyl butane
(c) hexane (d) 2, 4-dimethylpentane
34. (a) Vinyl chloride 35. (d)
56. The preparation of alkyl fluoride from alkyl chlor-
ide, in presence of metallic fluorides is known as
36. (b) CH CH CH CH Cl 37. (b) Resonance
(a) Williamson’s reaction
CH
(b) Finkelstein reaction
(c) Swarts reaction 38. (c) CH – C–Cl 39. (a) CH X 40. (a) 6
(d) Wurtz reaction CH
57. IUPAC name of the following compound is