www.cet-power.

com
TSI ALTO

20-480
kVA

TELECOM DATACOM MASS TRANSIT OIL & GAS POWER UTILITIES

MODULAR INVERTER
POWER 20 kVA - 16 kW
INPUT 48 Vdc
OUTPUT 3x400 Vac + N

DESCRIPTION
ALTO is a compact and scalable modular inverter providing
a pure sine wave AC supply. Leveraging the existing DC
Power system, it provides an excellent high power AC
backup solution. It uses the latest inverter technology,
providing superior energy efficiency in a compact size.
The “Twin Sine Innovation” (TSI) technology eliminates all
single points of failure with full scalability; up to 32 modules
in parallel and high efficiency of up to 96% reducing
operating costs.
MAIN FEATURES
APPLICATIONS  ual input sources (AC & DC) with wide AC input
D
All high power business critical applications and all types range 150 Vac to 265 Vac
of AC loads. The design is modular and scalable with hot- High efficiency
swappable inverter modules which ensures low Mean Time Transfer time reduced to 0
to Repair (MTTR), reduction in service costs and meets the 20 kVA in 3 U
changing needs for future expansion. up to 120 kVA per cabinet

Illustrations are non-binding and may include customized fittings.

www.cet-power.com
TSI ALTO
ALTO MODULE ALTO 120
GENERAL
EMC (immunity) EN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-8
EMC (emission) (class) EN 55022 (A)
Safety EN 62040-1
Cooling / Isolation Forced / Doubled
MTBF > 200 000 hrs (MIL-217-F)
Efficiency (Typical): Enhanced power conversion / on line 96% / 93%
Dielectric strength DC/AC 4300 Vdc
3 disconnection levels on AC out and DC in power ports
True Redundant Systems – compliant 4 disconnection levels on AC in port
RoHS Compliant
Vibration GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100 Hz 0.5 g 100 to 500 hz-1.5 g / Drop test
Designed for installation in an IP20 or IP21 environment.
Operating conditions When installed in a dusty or corrosive environment, appropriate measures (air filtering, …) must be taken.
Altitude above sea without de-rating < 1500 m / derating > 1500 m – 0.8 % per 100 m
Ambient / storage temperature / relative humidity -20 to 40 ° C / -40 to 70 ° C / 95 %, non-condensing
Material (casing) Coated steel-ALU ZINC
AC OUTPUT POWER
Nominal Output power (VA) / (W) Per module 20 kVA-16 kW Per cabinet 120 kVA-96 kW
Short time overload capacity max 130% 15 s
Admissible load power factor Full power rating from 0 inductive to 0 capacitive
Internal temperature management and switch off Yes
DC INPUT SPECIFICATIONS
Nominal voltage (DC) 48 Vdc
Voltage range (DC) 40 - 60 Vdc
Nominal current (at 40 Vdc and 14,5 kW output per module) 385 A per module 3x770 A per cabinet (6 modules) 2 modules per DC feed
Maximum input current (for 15 second) 500 A per module 3x1000 A per cabinet (6 modules) 2 modules per DC feed
Voltage ripple (resistive load 54 Vdc) < 2 mV
Input voltage boundaries User selectable
AC INPUT SPECIFICATIONS
Nominal voltage (AC) 3x 380 Vac + N - 3x400 Vac + N - 3x415 Vac + N
Voltage range (AC) 3 x (150 Vac – 265 Vac phase to neutral with derating below 185 Vac)
Conformity range before transfer to DC Adjustable
Power factor > 99%
Frequency range (selectable) / synchronization range 50Hz - 60Hz / Ajustable : 30Hz to 70 Hz synchronization range
AC OUTPUT SPECIFICATIONS
Nominal voltage (AC*) 3x 380 Vac + N - 3x400 Vac + N - 3x415 Vac + N
Frequency / frequency accuracy 50 - 60 Hz / 0.03 %
Total harmonic distortion (resistive load) < 1.5 %
Load impact recovery time < 0,5 s
Turn on delay 20 to 40 s
Nominal current. Protected against reverse current 28.9 A per phase per module 175 A per cabinet
Crest factor at nominal power
3:1
With short circuit management and protection
Short circuit clear up capacity per phase 53 A 20 mS - 38 A 15 Sec. 6 x 53 A 20 mS - 38 A 15 Sec.
IN TRANSFER PERFORMANCE
Max. voltage interruption / total transient voltage duration (max) 0s/0s
SIGNALING & SUPERVISION
Display Synoptic LED
carmeldesign.be 04/2014

Alarms output / supervision Dry contacts on T4S / MODBUS, TCP-IP, SNMP

Remote on / off On terminal in the cabinet
TSI ALTO – Datasheet v1.4 Specifications can change without notice. New data will be updated on our Web site: www.cet-power.com. The present equipment is protected by several international patents, trademarks and copyrights. *Operation within lower voltage
networks leads to de-rating of
power performances.

532 / 571 mm

2100 mm
3U Net weight 350 kg
/ 6 modules
30 kg

565 mm
800 mm
Illustrations are non-binding and may include customized fittings. 700 mm