Professional Documents
Culture Documents
TP Handbook Pair Skating 2020-21 - Final
TP Handbook Pair Skating 2020-21 - Final
Technical Panel
Handbook
Pair Skating
2020/2021
July 20, 2020
2020-2021 1
Calling procedure
In both Short Program and Free Skating whenever possible we should call
the elements really performed and not the elements that are required.
Any wrong elements will receive an “*” that will result in “No Value”.
Any element in Short Program and Free Skating started after the required
time (plus the ten (10) seconds allowed) must not be identified by the
Technical Panel and will have no value.
2020-2021 2
Step Sequence
Rules
General: The Step Sequence is included in the Short Program every season; there is no
Short Program Step Sequence in the Free Skating program.
All step sequences should be executed according to the character of the music.
Step sequence should be executed together or close together and may include
any unlisted jumps. Short stops in accordance with the music are permitted. Step
sequences must fully utilize the ice surface. Turns and steps must be balanced
in their distribution throughout the sequence.
Credit will be given to a pair which changes places and holds or uses difficult
skating moves together during a step sequence. The workload between both
partners must be even to be taken into account for a possible higher Level.
Level features
1) Minimum variety (Level 1), simple variety (Level 2), variety (Levels 3–4) of difficult turns and steps of both
partners throughout (compulsory)
2) Rotations in either direction (left and right) with full body rotation covering at least 1/3 of the pattern in total
for each rotational direction
3) Use of body movements for at least 1/3 of the pattern
4) Changes of position (crossing at least three times while doing steps and turns) for at least 1/3 of the
sequence, but not more than 1/2 of the sequence The partners must maintain not more than approximately
three meters distance between each other throughout the crossing feature or not separating at least half
of the pattern (changes of holds are allowed)
5) Two different combinations of 3 difficult turns (rockers, counters, brackets, twizzles, loops) executed by
both partners with continuous flow within the sequence
Clarifications
Pattern There is no prescribed pattern of the Step Sequence, however it must fully utilize
the ice surface. The Step Sequence must be visible and identifiable and should
be performed by using the full ice surface (e.g. straight line, serpentine, circle,
oval or similar shape). Failure to achieve the above description will result in no
value.
In features 2 – 5 “pattern” and “sequence” means the pattern actually executed
by the skater.
Beginning and end of This is when the skaters actually start and conclude the Sequence.
the pattern
Definition of Turns Turns: twizzles, brackets, loops, counters, rockers, three turns.
and Steps Steps: toe steps, chasses, mohawks, choctaws. change of edge, cross rolls.
Definition of choctaw Choctaw is a step from one foot to the other in which the curve of the exit edge is
opposite to that of the entry edge. The change of foot is directly from outside edge
to inside edge or vice versa and from forward to backward or vice versa.
Definition of Difficult Difficult Turns and Steps: brackets, loops, twizzles, counters, rockers, сhoctaws.
Turns and Steps Turns and Steps must be executed on clean edges. If a turn is “jumped”, it is not
counted as performed.
Minimum variety Must include at least 5 difficult turns and steps, executed by both partners, none
of the types can be counted more than twice.
2020-2021 3
Simple variety Must include at least 7 difficult turns and steps, executed by both partners, none
of the types can be counted more than twice.
Variety Must include at least 9 difficult turns and steps, executed by both partners, none
of the types can be counted more than twice.
No minimum variety, If skaters (or one of the partners) does not perform a minimum variety in steps
no simple variety, and turns throughout the sequence, the Level cannot be higher than Basic. If
only simple variety skaters (or one of the partners) does not perform a simple variety in steps and
turns throughout the sequence, the Level cannot be higher than 1. If one or both
skaters perform only simple variety in steps and turns throughout the sequence,
the Level cannot be higher than 2.
Balance & workload Turns and steps must be balanced in their distribution throughout the sequence.
The workload between both partners must be even.
If one or both of these requirements are not fulfilled, the Level cannot be higher
than Basic.
Rotations in either This feature means that the skaters rotate with any listed and unlisted turns and
direction steps continuously in one direction for at least 1/3 of the sequence and then
continuously for at least 1/3 of the sequence in the opposite direction (clockwise
and anti-clockwise) or over the length of the step sequence the skaters are
rotating with any listed and unlisted steps and turns for at least 1/3 of the
sequence in total (not continuous) in one rotational direction and at least 1/3 of
the sequence in total (not continuous) in the opposite direction (clockwise and
anti-clockwise). “Full body rotation” means one complete rotation. The skaters
should not just turn half a rev. back and forth.
Use of body Use of body movements means the visible use by both skaters for a combined
movement total of at least 1/3 of the pattern of the step sequence any movements of the
arms, and/or head and/or torso and/or hips and/or legs that have an effect on the
balance of the main body core.
Having an effect on the balance of main body core can also be understood as
having an effect on the balance of the body as a whole and influencing the
balance on the blade.
Two combinations of Difficult turns are rockers, counters, brackets, twizzles, loops. In the
difficult turns combinations:
- three turns are not allowed;
- changes of edges are not allowed;
- a jump/hop is not allowed;
- changes of feet are not allowed;
- the free foot must not touch the ice.
- at least one turn in the combination must be of a different type than the others.
The exit edge of a turn is the entry edge of the next turn.
The combination must be executed by both partners with continuous flow within
the sequence.
A combination of A combination of difficult turns can consist of turns that are not the same for Man
difficult turns and Lady but must be done by the partners at the same time.
executed by both
partners
What makes the Two combinations of difficult turns are considered to be the same if they consist
combinations same or of the same turns done in the same order, on the same edges and the same foot.
different
2020-2021 4
Jump with more than Unlisted jumps, independent of their number of revolutions can be included in the
half a revolution step sequence without a deduction or any other consequence.
executed in the step Listed jumps with more than half revolution will be ignored in SP as an element,
sequence but will force the Judges to reduce GOE by 1 grade for “Listed jumps with more
than ½ rev. included”.
In any case this does not influence the determination of Level of difficulty of the
Step sequence.
Changes of positions Before and after the cross partners must clearly separate while each performing
(crossing) steps and/or turns. There must be at least 3 crosses. The distance from the first
cross to the third cross must be more than 1/3, but not more than 1/2 of the
sequence. The partners must maintain not more than approximately three meters
distance between each other throughout the crossing feature.
Not separating at “Not separating at least half of the pattern” presumes that the skaters do not
least half of the separate without any breaks for at least half of the sequence pattern.
pattern Changes of holds are allowed which may include a brief moment when partners
are not touching as they change holds.
Changes of positions If the requirements are fulfilled, skaters can get one of these two features, but not
or not separating both.
2020-2021 5
Choreographic Sequences
Rules
Free Skating A Choreographic Sequence consists of any kind of movements like steps, turns,
spirals, arabesques, spread eagles, Ina Bauers, hydroblading, any jumps with
maximum of 2 revolutions, spins, small lifts etc. Listed elements included in the
Choreographic Sequence will not be called and will not occupy a box. The pattern
is not restricted, but the sequence must be clearly visible.
The Technical Panel identifies the Choreographic Sequence which commences
with the first skating movement and is concluded with the preparation to the next
element (if the Choreographic Sequence is not the last element of the program).
The Choreographic Sequence is included in Free Skating. The Choreographic
Sequence has a base value and will be evaluated by the Judges in GOE only.
Clarifications
How to call the The call should be “Choreo Sequence confirmed” (if the Sequence will be counted)
Choreographic or “Choreo Sequence no value” in the opposite case.
Sequence
Listed single and Listed single and double jumps included in the Choreographic Sequence will not be
double jumps called and will not occupy an element’s box.
Jumps with more A jump with more than 2 revolutions is called and counted. The Choreo Sequence
than 2 revolutions ends the moment this jump is executed.
Spins Any spin included in the Choreographic Sequence will not be called and will not
occupy an element’s box.
Pattern Any pattern is allowed, however the Sequence must be clearly visible.
2020-2021 6
Solo Spin Combination
Rules
General The minimum number of revolutions required in a position is two (2). In case this
requirement is not fulfilled, the position is not counted.
If the skater falls when entering a spin, a spin or a spinning movement is allowed
immediately after this fall (for filling time purpose) with this spin/movement not being
counted as an element.
Variations of positions of the head, arms or free leg, as well as fluctuations of speed
are permitted.
The Solo Spin combination must have a minimum of two different basic position
with 2 revolutions in each of these positions by both partners anywhere within the
spin. To receive full value, a Spin combination must include all three basic positions
by both partners the number of revolutions in positions that are non-basic is
counted in the total number of revolutions. Changing to a non-basic position is not
considered as a change of position. A change of foot may be executed in the form
of a step over or a jump. The change of foot and the change of position may be
made either at the same time or separately.
The spin must have a required minimum number of revolutions, the lack of which
must be reflected by the Judges in their marking, however a spin with less than
three (3) rotations is considered as a skating movement and not a spin.
Short Program – The solo spin combination in the Short Program must have at least two (2)
Solo Spin revolutions in two basic positions (to receive full value, a Spin combination must
combination with include all three basic positions by both partners). Minimum of five (5) revolutions on
only one change of each foot. The change of foot may be executed in the form of a step over or a jump
foot and the change of foot and the change of position may be made either at the same
time or separately.
Level features
1) Difficult variations (count as many times as performed with limitations specified below)
2) Change of foot executed by jump
3) Jump within a spin without changing feet
4) Difficult change of position on the same foot
5) Difficult entrance or difficult exit
6) Clear change of edge in sit (only from backward inside to forward outside), camel, Layback, Biellmann or
difficult variation of an upright position
7) All 3 basic positions on the second foot
8) Both directions immediately following each other in sit or camel spin
9) Clear increase of speed in camel, sit, layback or Biellmann or difficult variation of an upright position (except
in crossfoot spin)
10) At least 6 rev. without changes in pos./variation, foot and edge (camel, layback, difficult variation of any
basic or non-basic position)
If 6 revs are executed on both feet, any one of these executions can be taken in favour of the skaters.
Features 2 to 10 and any category of difficult spin variation count only once per program (first time
attempted).
Any category of difficult spin variation counts only once per program (first time it is attempted). In any
spin with change of foot the maximum number of features attained on one foot is two (2).
2020-2021 7
All features must be performed by both skaters at the same time in order for the feature to be awarded
(e.g. for Feature 1, both skaters must perform the same difficult variation at the same time).
Clarifications
Positions .
Basic Positions There are 3 basic positions: camel, sit and upright positions. Non-basic positions are
all other positions.
Camel: free leg backwards with the knee higher than the hip level, however Layback,
Biellmann and similar variations are still considered as upright spins.
Sit: the upper part of the skating leg at least parallel to the ice.
Upright: any position with extended or slightly bent skating leg which is not a camel
position.
Non-basic positions All the other positions not fulfilling the requirements of any basic positions.
The number of revolutions in non-basic positions is counted in the total number of
revolutions; non-basic positions can be considered as difficult variations in
accordance with the definition of such positions, but going to one of these positions is
not considered as a change of position which can only be from one basic position to
another basic position.
Positions at the Both skaters must do the same basic or non-basic position at the same time in order
same time for the position to count.
Less than 2 If any spin does not have at least 2 continuous revolutions in a basic position, no
revolutions in every Level has to be given.
basic position
Less than 2 A spin combination executed with only 1 position with at least 2 revolutions by both
revolutions in basic partners (according to requirements) and in all other positions less than 2 revolutions
positions (not according to requirements) receives no Level in the Short Program.
All 3 basic positions In the spin combination, in order to be counted as a Level feature, all three basic
executed on the positions must be executed by both partners on the second foot. This feature can be
second foot awarded only if its execution is not interrupted by a change of foot
Only two basic A spin combination with and without change of foot which includes only two basic
positions positions with not less than 2 revolutions will have a lower base value in comparison
with a spin combination with all three basic positions with not less than 2 revolutions.
The corresponding base values are listed in the SOV.
Abbreviation and
Calling procedure For a spin combination with and without change of foot with 2 or 3 basic positions
(e.g. Level 4) the abbreviation will be CCoSp4V and CoSp4V or CCoSp4 and CoSp4
in case of 2 or 3 basic positions and the call will be “Solo spin combination
with/without change of foot, Level 4, V (if only 2 positions)”.
Difficult change of Change from a basic position to a different basic position without establishing a non-
position on the same basic position, requiring significant strength, skill and control and having an impact on
foot the ability to execute the position change. Continuous movement must be performed
throughout the change. May not include a jump to execute the change. The
basic positions before and after the change must be held for 2 revolutions.
2020-2021 8
Entrance and Exit
Difficult entrance or Only one of the two can be counted as a level feature.
Difficult exit The entrance is defined as the preparation immediately preceding a spin and may
include the beginning phase of a spin. The entrance must have a significant impact on
the balance, control and execution of the spin and must be performed on the first
spinning foot.
The intended basic spin position must be reached within the first 2 revolutions. The
position can be non-basic in spin combinations only.
A regular backward entry is not considered as a difficult entry.
The exit out of the spin is defined as the last phase of the spin and includes the phase
immediately following the spin.
Difficult exit: Any movement or jump that makes the exit significantly more difficult.
The exit must have a significant impact on the balance, control and execution of the
spin.
If the entrance or exit of a spin is not considered “difficult” by the Technical Panel, it is
considered as a transition and the feature can still be awarded in a later spin.
Simple variation A simple variation of position is a movement of a body part, leg, arm, hand or head,
which enhances but does not change the basic position of the main body core. A
simple variation does not increase the Level.
Difficult variation A difficult variation is a movement of a body part, leg, arm, hand or head, which
requires more physical strength or flexibility and has an effect on the balance of the
main body core. Only these variations can increase the level. All difficult variations
rules for singles also apply to pairs. Difficult variations relate to both partners.
Cross foot spin “Cross foot Spin” must be executed on both feet with the weight equally divided on
both feet. A Cross foot Spin is considered as a difficult variation of the Upright
position (US) and will receive, if correctly executed, a feature. It is not required to stay
on one foot for three revolutions before the cross. Increase of speed during a
crossfoot spin is not considered as a feature.
Sit Side The Sit Side position must also include a difficult variation which is a movement of a
body part/leg/arm/hand/head, which requires more physical strength or flexibility and
has an effect on the balance of the main body core.
Biellmann position “Biellmann position” is a difficult variation of the Upright position (UB) when the
skaters’ free leg is pulled from behind to a position higher than and towards the top of
the head, close to the spinning axis of the skaters .
2020-2021 9
Repetitions Any category of difficult spin variation in a basic position and a difficult variation in a
non-basic position counts only once (first time it is attempted).
Features in repeated Once a difficult spin variation has been attempted and a difficult variation of the same
variations category is executed, the variation cannot be counted, but any additional feature in
this difficult variation can still be counted.
What is an attempt? A difficult variation is considered as attempted when this variation is clearly visible,
independent of the fact this variation was counted or not.
Similar variations in If a difficult variation in a non-basic position is quite similar to one of the executed
basic and in non- difficult variation in a basic position, the last performed of these two variations will not
basic positions be counted as a Level feature.
Free leg drops If the free leg drops down for a long time while preparing for a difficult camel variation,
the corresponding Level feature is still awarded, but the Judges will apply the GOE
reduction.
Too long to reach The reduction will also be applied if it takes a long time for the skater(s) to reach the
basic position necessary basic position in spins in one position.
Jump on the same In any spin a clear jump started and landed on the same foot will be counted as a
foot within a Spin feature only if the skater reaches the basic position within the first 2 revolutions after
the landing.
This jump has no requirements to the air position, but there must be a clear jump.
The jump is considered as a Level feature only when it “requires significant strength”.
This jump can be performed even before the required minimum number of revolutions
in a spin in order to be considered as a feature in Short Program.
Increase of speed For camel, sit, layback, Biellmann or difficult variation of upright position (except
crossfoot spin), once the position has been established, a clear increase of speed by
both partners will be considered as a Level feature. Increase of speed counts only in
a basic position or while going within a basic position into its variation. It is not valid
as a feature if the increase of speed happens while going from one basic position to
another basic position.
Clear change of A clear change of edge can only be counted as a feature in:
edge − Sit position from backward inside to forward outside edge
− Camel position
− Layback position
− Biellmann position
− Difficult variation of Upright position
Any other attempt of a change of edge will be ignored, not blocking the possibility to
credit it elsewhere. Not considered as an attempt of a change of edge is the short phase
following a landing of a fly or a step-in (mostly from flat to edge, or executing a three
turn, etc).
A clear change of edge can only be counted as a feature, if there are at least 2
continuous revolutions on one edge followed by at least 2 continuous revolutions on
the other edge in the same position (sit, camel, Layback, Biellmann or difficult variation
of upright position).
A change of edge within a normal upright or non-basic position does not count as a
feature.
Spinning in both Spinning in both directions (clockwise & counter clockwise or visa-versa) in sit or camel
directions position or in a combination of the two immediately following each other can be counted
as a feature. A minimum of 3 revolutions in each direction is required. A spin executed
in both directions (clockwise & counter clockwise) is considered as one spin.
2020-2021 10
Number of Revolutions
Change of foot To be considered, a change of foot in a spin requires at least three (3) revolutions
before and after the change (these revolutions can be in any positions, including non-
basic positions). If there are not three (3) revolutions before or after the change, this
results in the following:
Short Program - the spin is not fulfilling the requirements, no Level & value will be
given.
Staying on the A change of foot in a spin means spinning on each foot. Any spin in which skaters
same foot remains spinning on the same foot is not considered as a change of foot spin.
Simple change of A simple change of foot, e.g. a step or a small hop does not require significant
foot strength and skill and does not increase the Level.
Change of foot Such change of foot can be counted as a feature only if the skater reaches the basic
executed by jump position within the first 2 revolutions after the landing.
This jump has no requirements to the air position, but there must be a clear jump.
The jump is considered as a Level feature only when it “requires significant strength”.
Toe Arabian as This change of foot is allowed, will be considered as a change of foot executed by
change of foot jump and will count as a feature.
Spin with a second The second change of foot (if attempted) in a spin with change of foot is not allowed
change of foot in Short Program (wrong element).
Spinning centres If the spinning centres (before and after the change of foot) are too far apart and the
too far apart criteria of “two spins” is fulfilled (there is a curve of exit after the first part and the
curve of entry into the second part), the second part of the spin will not be called and
will not be valid for the Level features. That results in the following:
Short Program- the spin is not fulfilling the requirements, no Level & value are given;
If there is only a curve of exit after the first part or the curve of entry into the second
part, this will result in GOE reduction for “Change of foot poorly executed” (this
reduction does not relate to change of foot together with change of direction).
Number of features The maximum number of features that a skater can get on one foot is 2.
on one foot for spin The features for difficult entry will be counted in the quota of the foot before the
combinations with change. The features “Change of foot executed by jump”,” Spinning in both
change of foot directions” and “All 3 basic positions on the second foot” will be counted in the quota
of the foot after the change. The feature for a cross foot spin will be counted in the
quota of the foot on which the cross position was started.
2020-2021 11
Pair Spin Combination
Pair Spin (Novice)
Rules
General The pair spin combination must consist of at least one change of foot and
Pair Spin Combination one change of position (sit, camel, upright or any variation thereof) of both
partners The Pair spin combination must have a minimum of two different
basic positions with 2 revolutions in each of these positions by both partners
anywhere within the spin. To receive full value, a Spin combination must
include all three basic positions by both partners.
The pair spin combination should have not less than eight (8) revolutions in
total. The lack of revolutions is penalized by the Judges in GOE.
A spin combination executed with less than two (2) revolutions in all
executed basic positions receives no Level and therefore no value.
A spin with less than three (3) rotations is considered as a skating movement
and not a spin.
The rotation must be continuous and no stop is permitted, except a short
stop when changing direction.
If one or both skaters fall when entering a spin, a spin or a spinning
movement is allowed immediately after this fall (for filling time purpose) with
this spin/ movement not being counted as an element.
Pair Spin - Novice If there is no change of foot or no change of position by both partners the
element will be called a pair spin.
Free Skating A well balanced Free Skating program for Seniors & Juniors must contain
one Pair Spin Combination.
There must be at least one change of foot of both partners not necessarily
executed by both partners at the same time. Spin can commence with a fly.
Level features
1) 2 changes of basic positions of both partners
2) 3 difficult variations of positions of partners, two of which can be in non-basic position (each variation of
each partner counts separately, each partner must have at least one difficult variation)
3) Difficult entrance or any flying entrance by one of both partners.
4) Difficult exit
5) Both directions immediately following each other.
6) At least 6 revolutions without any changes in position/variation and foot (camel, sit, difficult upright)
2020-2021 12
Clarifications
Positions There are 3 basic positions:
Camel (free leg backwards with the knee higher than the hip level);
Sit (the upper part of the skating leg at least parallel to the ice; if in a pair sit
spin the Lady’s free leg is behind and the Man’s free leg is in front, her basic sit
position is considered to be achieved, when her skating leg knee is bent 90
degrees or more);
Upright (any position with extended or slightly bent skating leg which is not a
camel position) and
Non-basic positions (all positions that according to the above definitions are
not camel, sit or upright).
The number of revolutions in non-basic positions is counted in the total number
of revolutions; non-basic positions can be considered as difficult variations in
accordance with the definition, but going to one of these positions is not
considered as a change of position.
Less revolutions in a The minimum number of revolutions required in a position/variation is two (2).
position/variation If one or both skaters perform less than two (2) revolutions in a position/
variation, this position or variation will not be counted.
Change of position A change of position is counted when it is from one basic position to another
basic position (may go through non-basic position) with a minimum of two (2)
rev. of both partners in each of these positions.
Change of foot To be considered, a change of foot in a spin requires at least three (3)
revolutions before and after the change (these revolutions can be in any
positions, including non-basic positions). If there are not 3 revolutions before or
after the change of foot executed by both partners, the PCoSp will be marked with a “V”.
If there is no attempt of a change of foot by either partner or there are less than 3
revolutions on both feet by either partner, the spin will have “No Value”.
No change of foot If there is no change of foot or no change of position by one or both partners,
and/or position the spin will be called a “Pair Spin Combination no Value.“
Number of changes of The first 2 changes of basic positions of both partners (may be through non-
positions basic positions) will be counted as one Level feature.
Number of difficult Any difficult variation can be counted if it lasts for at least two (2) revolutions.
variations executed
Each variation of each partner is counted separately.
For one Level feature the spin must contain 3 difficult variations (two can be in a
non-basic position). Each partner must have at least one difficult variation.
2020-2021 13
Fly/Jump entrance Fly/Jump into spin can be executed by one or both partners. One partner can
execute fly/jump and other partner can enter the spin in any position doesn’t
need to be difficult.
Difficult Entrance Entrance into a spin is defined as the preparation immediately preceding a spin
and may include the beginning phase of a spin. The entrance must have a
significant impact on the balance, control and execution of the spin. Must be
executed by both partners.
Entrance from The skaters should skate both backward outside or both backward inside right
backward outside or before they begin rotating and enter the spin without assistance of free leg.
inside edge There are no three turns or any other turns before skaters start the actual spin.
The entrance from backward outside/inside edge requires the first two
revolutions of each partner to be done on backward outside edge or the first
two revolutions of each partner to be done on backward inside edge. Only such
a backward entrance is counted as a Level feature.
Difficult Exit Exiting in a lift or spinning movement, an innovative move that makes the exit
significantly more difficult. The exit must have significant impact on the
balance, control and execution of the spin.
Lady lifted during the The lady is allowed to be lifted from the ice during the spin but the man must
pair spin stay one foot. This is not considered as a feature but allows creativity. The
revolutions executed while the lady is being lifted count in the total number of
revolutions.
Spinning in both Execution of spins in both directions (clockwise and counter clockwise) that
directions immediately follow each other will be rewarded by counting this as an additional
feature in all Levels. A minimum of 3 revolutions in each direction is required. A
Spin executed in both directions (clockwise and counter clockwise) as above is
considered as one Spin.
At least 6 revolutions This feature can be granted only when there are at least 6 revolutions
(executed simultaneously by both partners) without any changes in camel, sit
or difficult upright position or its variation.
Short stop The rotation must be continuous, and no stop is permitted except a short stop
when changing direction together with the change of foot. If there is a stop with
the toe or blade, that will be the end of the spin.
Spin combination with A spin combination which includes only two basic positions by one or both
only two basic partners with not less than 2 revolutions will have a lower base value in
positions comparison with a spin combination with all three basic positions by both
partners with not less than 2 revolutions. These base values are indicated in the
SOV.
Abbreviation and
Calling procedure For a PCoSp with 2 or 3 basic positions (e.g. Level 4) the abbreviation will be
PCoSp4V or PCoSp4 and the call will be “Pair spin combination, Level 4” V (if
only 2 positions).
Free Skating A well balanced Free Skating program for Seniors & Juniors must contain
- maximum of 1 Solo Jump and
- maximum of 1 Jump Combination or Sequence.
All jumps executed with more than 2 revolutions (double Axel and all triple and quadruple
jumps) must be of different nature (different name), however the jump combination or
sequence can include two same such jumps.
Short Program Jumps which do not satisfy the requirements (including wrong number of revolutions)
will have no value, but will block a jumping box, if one is empty.
Jump Combination
Free Skating In a jump combination the landing foot of a jump is the take-off foot of the next jump. One
full revolution on the ice between the jumps (free foot can touch the ice, but no weight
transfer) keeps the element in the frame of the definition of a jump combination.
However (Euler) (landing backwards) when used in between two listed jumps in a
combination is considered as a listed jump. When executed separately Euler stays as
unlisted jump.
1Eu can only be downgraded by the technical panel. The Judges will reflect 1Eu if there is
a step over, no clear jump as a GOE reduction.
If in the opinion of the TP the intended Waltz jump (Axel) is used only as the preparation
to the next jump, this Waltz jump will not be called.
The TP has the authority not to call a single jump which is more similar to a hop than a
jump that is a result of a bad landing of the previous jump. The Judges will reflect the mistake
in the GOE.
Jump Sequence
Free Skating A jump sequence consists of 2 (two) jumps of any number of revolutions, beginning with
any jump, immediately followed by an Axel type jump with a direct step from the landing
curve of the first jump to the take-off curve of the Axel jump.
Clarifications
Calling quarter, The TP must call the attempted jump even if it is clear that it is landed on the quarter,
under-rotated and under-rotated or downgraded. All these jumps will count as the intended jump in the
downgraded jumps application of the Well Balanced Program regulations.
The quarter/half mark of landing are the border lines to identify cheated jumps.
The camera angle is important to consider when deciding upon a cheated jump
particularly when the jump is at the opposite end of the rink than the camera.
In all doubtful cases the Technical Panel should act to the benefit of the skater.
Landed on the A jump will be considered as “quarter” if it is missing rotation of a ¼. This jump will be
quarter indicated by the Technical Panel to the Judges and in the protocols with a “q” symbol after
the element code.
Under-rotated A jump will be considered as “Under-rotated” if it has missing rotation of more than a ¼,
jumps but less than ½ revolution.
An under-rotated jump will be indicated by the Technical Panel to the Judges and in the
protocols with a “<” symbol after the element code. Jumps identified as under-rotated will
receive reduced base values which are listed in the SOV chart.
2020-2021 15
Downgraded jumps A jump will be considered as “Downgraded” if it has “missing rotation of ½ revolutions or
more”.
A downgraded jump will be indicated by the Technical Panel to the Judges and in the
protocols with a “<<” symbol after the element code.
A jump identified as downgraded will be evaluated using the scale of values (SOV chart)
for the element of one rotation less (i.e. a downgraded triple will be evaluated with the
scale of values for the corresponding double).
If a jump is over-rotated more than a quarter revolution, it is called as a jump with the
Over-rotated jumps higher revolution. For example, 2T with more than a quarter revolution will be called as 3T
downgraded (<<) by the technical panel.
Cheated take off A clear forward (backward for Axel type jump) take off will be considered as a downgraded
jump. The toe loop is the most commonly cheated on take-off jump. The Technical Panel
may only watch the replay in regular speed to determine the cheat and downgrade on the
take-off (more often in combinations or sequences).
Taking off from Flip take-off is from a backward inside edge, Lutz take-off is from a backward outside edge.
wrong edge If the take-off edge is not clean correct, the TP indicates the error to the Judges using the
(Flip/Lutz) signs “e” (edge) and “!” (attention). The TP may watch the replay in slow motion. The TP
uses the sign “e” if the take-off edge is definitely wrong. The Base values of the jumps with
the sign “e” are listed in the SOV chart. The TP uses the sign “!” if the take-off edge is not
clear. In this case the Base value is not reduced. Both mistakes are reflected in the GOE of
the Judges.
Under-rotated If both signs “e” and “<” are applied for the same jump, the Base value is indicated in the
jumps taken off SOV chart.
from wrong edge
(Flip/Lutz)
Popped listed The attempt will count as one jump element. However, a small hop or jump with up to one-
jumps half revolution performed as a kind of “decoration” is not to be considered as a jump and
will be marked within the component “Transitions”.
Non-listed jumps Jumps that are not listed in the SOV (e.g. walley, split jump, Inside Axel with any number
of revolutions taking off from the forward inside edge etc.) will not count as a jump
element, but might be used as a special entrance to the jump to be considered in the mark
for Transitions.
A Toe Walley, however, will be called and count as a Toe loop.
Attempted Jump What is an attempt? In principle, a clear preparation for a take-off for a jump, stepping to
the entry edge or placing the toe pick into the ice and leaving the ice with or without a turn
is considered an attempt of a jump, receives no value and blocks a box.
In some cases, which need to be decided by the Technical Panel, the preparation for the
take off without leaving the ice might be also called an attempt, e.g. a loop-jump take off
when the skater falls before leaving the ice, or a skater steps onto the forward take off
edge of an Axel and pulls back the free leg and arms, starts the forward movement to
jump into the air with the free leg and arms passing through forward, but at the last
moment does not leave the ice, etc.
Unequal number of In case of unequal number of revolutions of partners in a jump performed as a solo jump
revolutions or part of a combo or a sequence, this jump will be called as a jump with lesser amount of
revolutions executed by the partners. The Judges will reflect the mistake in their GOE.
Different Jumps If the partners definitely perform different types of jumps, the result is no Value. The
performed name of the jump will be “jump with a lesser value” without any signs. Only this jump will
be blocked from repetition. Example: 3T by one partner, 3S by the other partner will result
in 3T*.
2020-2021 16
Spin and jump back If skaters perform a spin, immediately followed by a jump or vice versa, the two elements
to back are called separately with credit given to difficult take off/entry (GOE). A listed jump that is
called and executed immediately after a spin is not considered as difficult exit of a spin.
Short Program
Element other than If a Junior Pair performs a different solo jump than required, the element will receive no
required value, but will block the jumping box.
Free Skating
Repeated jump A repeated jump with more than 2 revolutions of the same name and number of
revolutions will occupy a jumping box but will be given no value. However, within the jump
combination or jump sequence the two jumps may be the same.
If any jump of a combination/sequence is not according to the requirements, only the jump
not according with the requirements will be deleted and not the entire
combination/sequence. Jumps are considered in the order of their execution.
Second jump If a second jump combination/sequence is executed, only the jump not according with the
combination/ requirements will be deleted and not the entire combination.
sequence
Two solo jumps If both partners execute two (2) solo jumps during the program, the second jump will be
marked with the sign “+REP” and will receive 70% Base Value with result rounded to two
decimal places.
Fall or step out after If one or both skaters fall/step out of the first jump and immediately after that execute
first jump another jump, this continuation will be ignored by the Technical Panel.
The element will be identified as follows:
If both skaters fall/step out, only the executed solo jump will be called.
If one skater falls/steps out and the other executes a Jump Sequence, the call should be
“First Jump + Sequence”.
If one skater falls/steps out and the other executes a Jump Combination, the call should
be “First Jump + Combo”.
Touch down with The element remains a Jump Combination even when there are 2 three turns (or no three
free foot without turns) between the jumps with a slight touch down (without weight transfer by both
weight transfer partners). In case of more than 1 full revolution on the ice the call will be the jumps
performed prior to this revolution + combo/sequence the same way as above.
Touch down with Touch down with free foot (with weight transfer) after the first jump and 2 three turns or
free foot with no turns between the jumps. The element will be called by the Technical Panel as follows:
weight transfer “First jump + Combo/Sequence” depending on the other partner’s execution (in other
cases).
Jump Combination: If the first/second jump by one or both partners of a two-jump combination fails to succeed
first/second jump is and turns out into a “non-listed jump”, but the other jump is a listed jump, the unit will be
a “non-listed” jump considered as a jump combo with only the listed jump receiving value.
One partner with If one partner performs a jump combination, but the other partner a jump sequence, the
combo, the other jump sequence will be called.
one with sequence
2020-2021 17
Throw Jumps
Rules
General Throw jumps are partner assisted jumps in which the Lady is thrown into the air
by the Man on the take-off and lands without assistance from her partner on a
backward outside edge.
Short Program Short Program for the season 2020-2021 must include one throw jump:
- Any double or triple for Seniors
- Double or triple Loop for Juniors
Short Program Throw jumps which do not satisfy the requirements (including wrong number
of revolutions) will receive No value and will block the corresponding box if one is
empty.
Free Skating A well balanced Free Skating program must contain maximum of 2 different Throw
Jumps (different name and/or different number of revolutions).
Clarifications
Calling quarter, The TP must call the attempted jump even if it is clear that it is landed on the
under-rotated and quarter, under-rotated or downgraded. All these jumps will count as the intended
downgraded jumps jump in the application of the Well Balanced Program regulations.
The quarter/half mark of landing are the border lines to identify cheated jumps.
The camera angle is important to consider when deciding upon a cheated jump
particularly when the jump is at the opposite end of the rink than the camera.
In all doubtful cases the Technical Panel should act to the benefit of the skater.
Landed on the A jump will be considered as “quarter” if it is missing rotation of a ¼. This jump
quarter will be indicated by the Technical Panel to the Judges and in the protocols with a
“q” symbol after the element code.
Under-rotated A throw jump will be considered as “Under-rotated” if it has missing rotation of
throw jumps more than a ¼ revolution, but less than ½ revolution.
An under-rotated throw jump will be indicated by the Technical Panel to the
Judges and in the protocols with a “<” symbol after the element code.
Throw Jumps identified as under-rotated will receive reduced base values which
are listed in the SOV chart.
Downgraded throw A throw jump will be considered as “Downgraded” if it has “missing rotation of ½
jumps revolutions or more.
A downgraded throw jump will be indicated by the Technical Panel to the Judges
and in the protocols with a “<<” symbol after the element code.
A throw jump identified as downgraded will be evaluated using the scale of
values (SOV chart) for the element of one rotation less (i.e., a downgraded triple
will be evaluated with the scale of values for the corresponding double).
If a throw jump is over-rotated more than a quarter revolution, it is called as a
Over-rotated throw jump with the higher revolution. For example, 2TTh with more than a quarter
jumps revolution will be called as 3TTh downgraded (<<) by the technical panel.
Repetition A repeated throw jump of the same number of revolutions and name (Junior or
(Free Skating) Senior), will occupy a throw box, but will be given no value, no GOE.
Flip/Lutz Throw These two throw jumps are considered as the same for the purpose of a Well
Jumps Balanced Free Skating program; these throws have the same Base value and
the same GOE additions and reductions. If these two throws with the same
number of revolutions are performed in a FS program, the second one will have
no value.
2020-2021 18
Lifts
Rules
General Pair lifts are classified as follows:
Group One - Armpit Hold position (See below variations of hold positions allowed)
Group Two - Waist Hold position
Group Three -
Hand to Hip or upper part of the leg (above the knee)
position
Group Four - Hand to Hand position (Press Lift type)
Group Five - Hand to Hand position (Lasso Lift type)
In any Group one hand hold may increase the difficulty of the lift.
Short Program The Short Program of the season 2020-2021 must include:
- Any Hip lift take off (Group Three) for Juniors and Seniors.
Only the prescribed overhead lift take-off is permitted.
The Lift in the Short Program can include a carry. If a carry is included it will
not receive a level feature.
2020-2021 19
Level features
Features 1), 2), 3) and 5) must be significantly different from lift to lift and if similar, will only count first
time attempted.
All the features can be counted only if executed in the first 3.5 revs. For both take-off and landing feature
there is an additional allowance of ½ rev. The additional ½ rev on take-off and landing (total 1 rev) allows
the take-off/landing feature to be considered at any point up to 4.5 revs.
Clarifications
Basic holds, positions Holds – Hand-to-Armpit, Hand-to-Waist, Hand-to-Hip or
upper part of the leg (higher than the knee), Hand-to-
Hand/Arm.
Positions – Upright (Lady’s upper body vertical), Star
(Lady’s position sideways with upper body parallel to the
ice) and Platter (Lady’s position flat, facing up or down
with upper body parallel to the ice).
If in a Lift the Lady’s position is changed from Upright
(head up) to Upright (head down) or from Platter to
Platter, Star to Star with half a rotation of the lady in any
direction this also is considered as a change of position.
Take off Simple – Includes but not limited to change of hand hold
on ascent of lift;
Difficult – Includes but is not limited to: somersault take
off, dance lift going immediately into a Pair Lift take off
without the lady touching the ice between the two lifts, one
hand take off, spread-eagle, Ina-Bauer, spirals by one or
both partners as the entry curve. Inside Axel take-off in 5ALi
and 5SLi is considered as a difficult variation of the take-off
(feature only awarded if take-off is from a forward inside
edge).
2020-2021 20
Take-off and landing A Senior Pair Difficult variation of take-off and landing
A Junior Pair Simple variation of take-off and landing
This feature can be awarded in several lifts only if its
execution is significantly different from lift to lift.
One hand hold in the dismount One hand hold counts as a Level feature only when the
Man uses one hand, the Lady uses either one hand or no
hands and she is not touching the partner with any part of
the upper body.
This hold can be counted as “a difficult landing variety”
only once per program.
Carry feature Simple – Duration at least 3 sec.
Difficult – includes at least one of the following features:
during the carry the Man for at least 3 seconds
- skates on one foot;
- holds the partner on one arm;
- performs crossovers;
- performs spread eagles or a similar move.
Allowed in both programs, but in SP does not count as
a Feature and in FS counts only the first time executed.
Break in rotation longer than 3 sec. Any break in the continuous rotation longer than 3 sec. will
be considered as a carry attempt.
2020-2021 21
Group 5 (Lasso) Lifts In a Lasso, or Group 5 Lift, the lady rotates around the
man/in relation to the man during the lifting process
between the take-off and the fully extended position. This
rotation must be visible by way of shoulders and or
hips. During the lifting process one of the man’s hands
must remain clearly above his shoulders. If not, the
group is identified as group 4 lift the different Types of
Group 5 Lifts can be identified by the take-off of the lady,
the relative position of the partners at the moment of take-
off, and the hand grip.
Identifying the number of revolutions The revolutions of the Man are counted from the moment
the Lady leaves the ice until the moment the Man’s arm(s)
begin to bend after full extension and consequently the
Lady begins to descend.
If during the Lady’s take off the Man is in a spread-eagle
or in some other position sideways, the rotation of the
Man will be determined by the position of his front foot at
the moment the Lady leaves the ice.
Illegal Lift (illegal grip etc.) If the Pair executes an illegal grip, the Level cannot be
higher than Base. The deduction for an illegal element will
apply.
2020-2021 22
Man starts bending the arm (s) When the Man begins to bend the arm after full extension,
the lift is concluded (excluding while changing
hold/position).
Any part of the lift, executed after the new extension will
be ignored for the Level features and also for the number
of revolutions of the Man.
Identifying the Level features Except features for take-off and landing, the lift Level
features will be counted from the moment the Man’s
arm(s) are fully extended till the moment he starts bending
the arm(s).
Change of hold Change of hold requires one full revolution before and
after this change. Change of hold means the Man’s hands
change from one lift group hold to another lift group hold.
If the Man changes hold for less than one (1) revolution, it
is not considered as a “change of hold”. However, change
from right arm hold to left arm hold or vice-versa with at
least one (1) revolution in each of these holds is also
considered as a change of hold.
In order to avoid counting one feature twice going from a
two-hand hold to a one hand hold or vice versa is not
counted in the number of hold changes.
Change of hold and of Lady’s position If a change of hold and a change of Lady’s position are
executed at the same time, only one Level feature will be
awarded.
The feature for “change of hold and/or Lady’s position”
can be awarded in several lifts only if it’s execution is
significantly different from lift to lift.
There are various holds (hand-to-hand, hand-to-arm,
hand-to body and hand to upper part of the leg (above the
knee)) and lady’s positions (Upright, Star and Platter. Rule
619 defines a change of hold/lady’s position as going from
one of these holds/positions to another hold/position.
If the same two holds/ positions are executed more than
once in the same order, these executions will be
considered as similar. Any other types of changes are
considered as “significantly different”, including repetition
of two same holds/positions in a different order.
Difficult variation of Only if the variation of the Lady significantly impacts the balance of the Lady in
Lady’s position the lift or requires specific strength and/or flexibility, this variation will influence
the Level. The feature “Difficult variation of the lady” can be awarded in
several lifts only if the variations are significantly different from lift to lift.
Change of rotational Requires one revolution before and after the change, counts only once per
direction by the Man program (first time it’s attempted)
Wrong take-off If the take-off is of a different nature then the required take-off, the lift will
(Short Program) receive no Level and no value.
All lifts of Group 5 If in a Free Skating program for Seniors or Juniors all Lifts are from Group 5,
(Free Skating) the last performed lift will be deleted.
2020-2021 23
Definition of a “small Any lift with a sustained/stabilized lady’s position in which the man’s hands
lift” remain not higher than his shoulder line. This lift can be with or without
rotation.
One-hand-hold of the Two rotations of the Man in total using one hand hold will count as a Level
Man feature. The third revolution with one hand hold will not count as an additional
Level feature in SP and will count as an additional Level feature only in one lift
(the first time it is performed) in FS. Parts on one hand shorter than one
revolution will not count.
This feature is awarded only if the Lady does not use her arms or uses only one
For Junior arm for support. It is not awarded if both arms of the Lady are touching the Man.
-lifts with more than one point of contact which require exceptional balance and
control. The majority of the lady’s weight must clearly be off the axis of the man’s
body core.
2020-2021 24
Twist Lifts
Rules
General The Lady must be caught in the air at the waist by the Man prior to landing and be
assisted to a smooth landing on the ice on a backward outside edge on one foot.
In the twist lift, a split position by the Lady, prior to rotating, is not mandatory, but
will be one of the features that might increase the Level of this element.
Short Program The Short Program must include one twist lift. A twist lift take-off is limited to a
Lutz/Flip take-off by the Lady. The number of revolutions of the Lady rotating
freely in the air is two (2) or three (3) for Seniors and Juniors.
Short Program Twist lifts which do not satisfy the requirements (including wrong number of
revolutions) will receive No value and will block the corresponding box if one is
empty.
Free Skating In Free Skating the take-off can be different from Lutz/Flip take-off by the Lady
(toe loop, axel). The number of revolutions in the twist lift is not limited. For
Seniors and Juniors, a Well Balanced Free Skating program must contain 1
twist lift.
Level features
1) Lady’s split position (each leg at least 45° from the body axis and Lady’s legs are straight or almost
straight)
2) Catching the Lady at the side of the waist without her hand(s)/arm(s)/any part of upper body touching the
Man
3) Lady’s position in the air with arm(s) above the head (minimum one full revolution)
4) Difficult take-off: turns, steps, movements, small lifts immediately preceding the take-off, executed with
continuous flow.
5) Man’s arms sideways, being straight or almost straight, reaching at least shoulder level after release of
the lady.
Clarifications
Cheating on landing Twist Lifts with lacking intended rotation on the landing can be downgraded if they
have “missing rotation of ½ revolutions or more”. A downgraded Twist Lift will be
indicated by the Technical Panel to the Judges and in the protocols with a “<<”
symbol after the element code.
The Technical Panel will identify any twist lift cheated by one half or more turn on
the landing as the lift of the lower value. For example, if in a triple twist lift the
Man is supporting the majority of the Lady’s weight when her upper body turns
only 2.5 revolutions, this will be called as a triple attempt and downgraded to a
double twist lift. The camera angle is important to consider when deciding upon a
cheated twist lift particularly when the twist lift is at the opposite end of the rink.
2020-2021 25
Lady’s split This feature is awarded only if each Lady’s leg, being straight or almost straight,
position is at least 45 degrees from her body axis.
Man’s arms After the Man releases the lady, his arms must change position going to the side
sideways, being of his body at least as low as his shoulders before he catches the Lady in the air.
straight or almost The arms of the Man must be straight or almost straight. If the Lady is not
straight, reaching at caught in the air, the feature is not awarded. However, the feature will be
least shoulder level awarded in case of any catch in the air (not necessarily at the waist).
after release of the
lady
Difficult take-off The feature is awarded only when there is (are) steps, turns, movement(s), small
lifts immediately preceding the take-off and executed with continuous flow); in
case of a break, no feature will be granted.
2020-2021 26
Death Spirals
Pivot Figure (Novice)
Rules
General In the final position while the Lady is performing the actual death spiral, both
Death Spiral the Man and the Lady must execute a minimum of one (1) revolution with the
knees of the Man clearly bent and in full pivot position. For a possible higher
Level, the Man should stay in a low pivot position. The Lady simultaneously
must skate on a clean edge with her body and head close to the ice surface,
however she must not touch the ice with her head or assist herself with the
free hand or any part of the body. The Lady’s body weight is supported by the
force of the spiralling edge and the hold of the Man. The Man must be in a
centred position with a fully extended arm. Any kind of position is counted as a
feature if Skaters’ hold lasts for at least one continuous revolution.
Pivot Figure The man performs a pivot holding the lady, who is following him with hand to
hand grip. The lady can be in a spiral, spreadeagle or have an extended leg
position.
For both Seniors & Juniors Short Program for the season 2020-2021 must
include Forward Inside Death Spiral.
Free Skating For both Seniors & Juniors a Well Balanced Free Skating program must
contain 1 Death Spiral. In Seniors this death spiral must be a different type
from the Short Program. Variations of arm holds are possible.
2020-2021 27
Level features
1) Difficult entry (immediately preceding the death spiral) and/or exit
2) Full revolution(s) of the lady when both partners are in “low” positions (counts as many times as
performed)
Clarifications
Positions Lady’s “low position”:
- for inside Death Spirals the lowest hip or buttock and head should not be
higher than her skating knee;
- for outside Death Spirals head should not be higher than her skating knee
and bodyline between knee of skating leg and head should be flat or shallow
arch.
Man’s “low pivot position”: buttocks not higher than the knee of his anchored
foot.
The Level of a death spiral without one full revolution in the described Man’s
and Lady’s simultaneous position cannot be more than 1.
Number of Any part of the Death Spiral with a higher Lady’s or Man’s position than
revolutions in “low” described above is not valid for Level features 2). The counting starts only
positions when the Lady and the Man are in the actual low death spiral position.
Loss of “low” In order to get features 2), the “low” position of both partners has to be
position (s) continuous. If the “low” position is lost, features 2) can be counted only if
performed prior to the loss.
Lady not in the If Lady’s head (for all death spirals) and/or lowest hip (for inside death spirals)
prescribed position is (are) higher then skating leg knee, the Level cannot be higher than 1.
If during the Death Spiral the lowest part of the Lady’s head never reaches the
level of her skating knee, the Death Spiral will have no value.
Execution of a In Short Program the death spiral is prescribed. If the Lady performs a different
different death spiral edge or direction, no Level and value will be given, but the box will be blocked.
(Short Program)
Lady skates on boot If the Lady loses the edge and goes to the boot or knee, this is considered as
the conclusion of the death spiral and no other features will be considered.
The TP must decide if this is a fall,
No pivot position or If the Man does not reach the pivot position at all or does not stay in this position
Man’s knee not bent for one revolution, or if the knee of his leg with toe pick in the ice is not clearly
or his arm not fully bent for one revolution, or if his holding arm is not fully extended for one
extended revolution, there will be no Level called and the death spiral will have no value.
2020-2021 28
Change of pivot In Short Program only the traditional pivot position of the Man is allowed in
position which he skates on a backward outside edge, holding the hand of the Lady
with fully extended arm with both knees clearly bent and in full pivot position.
No variation of this pivot position is allowed element will receive no value.
In Free Skating any death spiral will be considered as ended, once the Man
changes the pivot position. Consequently, only that part, in which the Man is in
the proper pivot position as to the text above, will be taken to determine the
Level.
Opposite hand-hold The opposite hand-hold of the Man is not allowed in the Short Program, is
(entry of death spiral) allowed in Free Skating, but is not considered as a Level feature. Opposite
hand-hold of the Lady is allowed both in Short Program and in Free Skating
but is not considered as a Level feature.
Change of arm hold In both SP and FS change(s) of arm hold of the Man and/or Lady is allowed at
any moment but is no longer a Level feature.
Whose revolutions For features 2) only the Ladies revolutions are counted. It is possible that the
are counted? Man does less full revolutions in the low position than the Lady if the Lady
passes behind the Man during the death spiral. This would require changes of
hold.
When does the death Entry commences at the beginning of the entry curve when one partner is on
spiral start? one foot on the edge of the death spiral and the other partner is also on one
foot or in a position such as spread eagle, shoot the duck etc.
When does the exit The exit from the death spiral starts when the Man starts bending his
start and end? “holding” arm in the elbow and ends when the Lady comes to the vertical
position.
When do the death They begin when the Man’s toe for the pivot is stationary (anchored) on the
spiral revolutions ice. They end when either the Man’s pivot ends or when the Lady begins to
start and end? rise in order to exit the death spiral. Whichever is first, will indicate the
conclusion.
Difficult *Entry, Exit Skater(s) must demonstrate positions that affect the main body core and
balance. The difficult entry position must be performed while both partners are
on the entry curve and the Lady and/or the Man are moving from a difficult entry
position directly and without delay to a Death Spiral position.
An example of a difficult exit: Lady exits immediately into a lift (dance or other)
or into a jump. *The feature for the Entry is awarded only if the low position is
reached by both partners within the first revolution after the man’s toe is
anchored in the ice.
2020-2021 29
Elements with no value or maximum Level B/1/2/3 in PAIRS SP & FS
2020-2021
2020-2021 30