T4 21 PDF
T4 21 PDF
T4 21 PDF
T4-21
CRUSH TEST APPARATUS 100 N (IEC 60598-2-8, Fig. 3)
KEYWORDS
T4-21, CRUSH TEST APPARATUS 100 N, IEC 60598-2-8, Fig. 3
COMPLIANCE
T4-21 CRUSH TEST APPARATUS 100 N is constructed in compliance with IEC 60598-2-8,
Fig. 3
INTRODUCTION
T4-21 CRUSH TEST APPARATUS 100 N is intended for checking the adequate resistance of
handlamps to heat.
The apparatus comprises two steel jaws, having a cylindrical face of 25 mm radius, a width of
15 mm, corners are rounded with a radius of 2,5 mm. It is wider then 50 mm that is
requested by standard, because some handlamps have larger dimensions.
The specimen should be clamped between the jaws in such a way that these press against it in
the area where it is gripped in normal use, the centre line of the jaws coinciding as nearly as
possible with the centre of this area. The force applied through the jaws is 100 N. It is equipped
with screw and handle that enables lifting such a heavy weight.
DESIGN
The jaws are made of stainless hardened steel all other parts are galvanically protected.
It is equipped with inscription plate that indicate conformity with standard. Calibration certificate
is enclosed and included in the price.
OTHER CONDITIONS
Warranty: 2 years
Support by E-mail: [email protected]
On line Skype VIDEO Support: Testing_support, matejsimonic
We will be glad to help you solve your problems and to hear any feedback from you.
The equipment described here is subject to redesign without notice. The change will not impair the function of apparatus its characteristics or the price.