Professional Documents
Culture Documents
PIT Oe 4S Operat Man 1005257-EN-02
PIT Oe 4S Operat Man 1005257-EN-02
Operating Manual-1005257-EN-02
Preface
This document is the original document.
Where unavoidable, for reasons of readability, the masculine form has been selected when
formulating this document. We do assure you that all persons are regarded without discrim-
ination and on an equal basis.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made
for the user's internal purposes. Suggestions and comments for improving this documenta-
tion will be gratefully received.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,
SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks
of Pilz GmbH & Co. KG in some countries.
Introduction ............................................................................................................................ 4
Validity of documentation.......................................................................................................... 4
Using the documentation .......................................................................................................... 4
Definition of symbols................................................................................................................. 4
Overview ................................................................................................................................. 5
Device features ......................................................................................................................... 5
Device view............................................................................................................................... 5
Safety ...................................................................................................................................... 6
Intended use ............................................................................................................................. 6
Safety regulations ..................................................................................................................... 6
Use of qualified personnel ........................................................................................................ 6
Warranty and liability ................................................................................................................ 6
Disposal .................................................................................................................................... 7
Installation .............................................................................................................................. 7
Dimensions in mm .................................................................................................................... 7
Wiring ...................................................................................................................................... 8
Terminal configuration .............................................................................................................. 8
Connect the device ................................................................................................................... 8
General wiring guidelines ......................................................................................................... 8
Connect cable........................................................................................................................... 9
Disconnect cable ...................................................................................................................... 9
Connection to PIT m4SEU........................................................................................................ 10
Introduction
Validity of documentation
This documentation is valid for the product PIT oe 4S. It is valid until new documentation is
published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
NOTICE
This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Device features
} Control and signal device with 4 illuminatable pushbuttons as N/O contacts
} For mounting cutouts D22 (diameter 22.3 mm +0.4 mm/-0.0 mm) in accordance with
EN 60947-5-1 with anti-rotation device
Device view
[1]
[2]
Legend
[1] Front view
[2] Rear view
Safety
Intended use
The PIT oe 4S enables you to switch and display 4 digital inputs and outputs.
The PIT oe 4S was designed for use with devices with digital inputs, e.g. PIT m4SEU.
The following is deemed improper use in particular
} Any component, technical or electrical modification to the product,
} Use of the product outside the areas described in this operating manual,
} Use of the product outside the technical details (see Technical details).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Safety regulations
Disposal
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
Function description
The PIT oe 4S enables you to switch and display 4 digital inputs and outputs.
Installation
} Install the device in the front panel of a control cabinet or in a control console.
Material thickness: 2 … 8 mm.
} Provide the front panel of the control cabinet or control console with a mounting cutout (Ø
22.3 mm +0.4 mm/-0.0 mm, D22 in accordance with EN 60947-5-1) and give the cutout a
recess for the latch (to protect against twisting):
24,50
} Guide the PIT oe 4S into the mounting cutout and fix it from the other side using the
plastic nut (M22). Note the torque setting of 1.3 ... 2.1 Nm. We recommend that you use
the installation wrench "PIT es wrench" for fixing the plastic nut (see Order
reference [ 13]).
Dimensions in mm
30.261 8.623
31.76
23
22
Wiring
Terminal configuration
-1234
+5 6 78
Legend
+/- (24 V/0 V) Supply voltage connections
1 … 4 Inputs of the PIT oe 4S for pushbutton illumination
5 … 8 Outputs of the PIT oe 4S
NOTICE
The power supply must meet the regulations for extra low voltages with pro-
tective separation (SELV, PELV).
The cables for the device's supply voltage must be fitted with a 250 mA slow
acting fuse.
} Provide strain relief for the connection cables, e.g: by attaching them to the control cab-
inet door or control console.
Connect cable
6 mm
[1] [2]
Disconnect cable
} Using the flat-head screwdriver, press the actuator element and pull the cable out of the
terminal point.
We recommend you use a flat-head screw driver with a 0.4 x 2.0 mm blade!
+
-
F
4 O4
3 O3
Inputs Outputs
2 O2
1 O1
8 I4
7 I3
Outputs Inputs
6 I2
5 I1
Technical details
General
Certifications CE, UKCA, UL Recognized Component
Electrical data
Supply voltage
Voltage 24 V
Kind DC
Voltage tolerance -15 %/+20 %
Duty cycle 100 %
Status indicator LED
LEDs
Quantity 4
Input current per LED at 24 V 3 mA
Input current at signal level "0" 0 mA
Input current at signal level "1" 3 mA
Pushbutton
Utilisation category
Min. current 1 mA
Max. current 20 mA
Environmental data
Climatic suitability EN 60068-2-1, EN 60068-2-14, EN 60068-2-2
Ambient temperature
In accordance with the standard EN 60068-2-1, EN 60068-2-2
Temperature range -20 - 60 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2
Temperature range -40 - 85 °C
Climatic suitability
In accordance with the standard EN 60068-2-78
Humidity 93 % r. h. at 40 °C
Max. operating height above sea level 2000 m
EMC EN 61131-2 (Zone B)
Vibration
In accordance with the standard EN 60068-2-6
Frequency 8,4 - 150 Hz
Acceleration 10 m/s²
Shock stress
In accordance with the standard EN 60068-2-27
Number of shocks 6
Acceleration 150 m/s²
Duration 11 ms
Environmental data
Airgap creepage
In accordance with the standard EN 61131-2
Overvoltage category II
Pollution degree 2
Protection type
In accordance with the standard EN 60529
Housing IP20
In accordance with UL Type 1 Enclosure
Front IP65, IP67
Mounting area (e.g. control cabinet) ≥ IP54
Mechanical data
Mounting position Any
Connection type Spring-loaded terminal
Max. torque setting for fixing screws 1,3 - 2,1 Nm
Conductor cross section with spring-loaded terminals
1 core flexible without crimp connector 0,2 - 0,5 mm², 26 - 20 AWG
1 conductor flexible with crimp connector without
plastic collar 0,25 - 0,5 mm²
Stripping length with spring-loaded terminals 6 mm
Dimensions
Height 32 mm
Width 32 mm
Depth 40 mm
Weight 17 g
Where standards are undated, the 2019-05 latest editions shall apply.
NOTICE
You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.
NOTICE
The B10d value only applies when the PIT oe 4S is used in conjunction with
the systems "PITmode fusion" and "PITmode flex".
Order reference
Product
Accessories
Support
and the scope of the equipment. We accept no responsibility for the validity, accuracy and entirety of the text and graphics presented in this information. Please contact our Technical Support
PMD®, PMI®, PNOZ®, PRBT®, PRCM®, Primo®, PRTM®, PSEN®, PSS®, PVIS®, SafetyBUS p®, SafetyEYE®, SafetyNET p®, THE SPIRIT OF SAFETY® are registered and protected trademarks
+52 55 5572 1300 Europe The Netherlands
of Pilz GmbH & Co. KG in some countries. We would point out that product features may vary from the details stated in this document, depending on the status at the time of publication
CECE®, CHRE®, CMSE®, InduraNET p®, Leansafe®, Master of Safety®, Master of Security®, PAS4000®, PAScal®, PASconfig®, Pilz®, PIT®, PLID®, PMCprimo®, PMCprotego®, PMCtendo®,
USA (toll-free) Austria +31 347 320477
+1 877-PILZUSA (745-9872) +43 1 7986263-0 Turkey
Belgium, Luxembourg +90 216 5775552
Asia +32 9 3217570 United Kingdom
China France +44 1536 462203
+86 21 60880878-216 +33 3 88104003
Japan Germany You can reach our
+81 45 471-2281 +49 711 3409-444 international hotline on:
South Korea Ireland +49 711 3409-222
+82 31 778 3300 +353 21 4804983 [email protected]
Italy, Malta
+39 0362 1826711
Headquarters: Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected], Internet: www.pilz.com