Professional Documents
Culture Documents
Scalar Wave Energy As Weapon
Scalar Wave Energy As Weapon
Chapter 6
Scalar Wave Energy as Weapon
There is a wide confusion on what are “scalar waves” in serious and less serious
literature on electrical engineering. In this chapter we explain that this type of waves
are longitudinal waves of potentials. It is shown that a longitudinal wave is a
combination of a vector potential with a scalar potential. There is a full analog to
acoustic waves. Transmitters and receivers for longitudinal electromagnetic waves
are discussed. Scalar wave was found and used at first by Nikola Tesla in his wireless
energy transmission experiment. The scalar wave is the extension of Maxwell
equation part that we can call it more complete electromagnetic (MCE) equation
as described in this chapter.
6.1 Introduction
It is the purpose of this chapter to discuss a new unified field theory based on the
work of Tesla. This unified field and particle theory explains quantum and classical
physics, mass, gravitation, constant speed of light, neutrinos, wave, and particles, all
can be explained by vortices [1], white to discuss on these unique, various recent
inventions and their possible modes of operation, but to convince those listening of
their value for hopefully directing a future program geared towards the rigorous
clarification and certification, of the specific role the electroscalar domain might play
in shaping a future, consistent, classical, electrodynamics. Also, by extension to
perhaps shed light on current theory conceptual and mathematical inconsistencies do
exist, in the present interpretation of relativistic quantum mechanics. In this regard, it
is anticipated that by incorporating this more expansive electrodynamic model, the
source of the extant problems with gauge invariance in quantum electrodynamics
and the subsequent unavoidable divergences in energy/charge might be identified
and ameliorated.
1
archived by triple7inc
Not only does the electroscalar domain have the potential to address such lofty
theoretical questions surrounding fundamental physics, but also another aim in this
chapter is to show that the protocol necessary for generating these field effects may
not be present only in exotic conditions involving large field strengths and specific
frequencies involving expensive infrastructure such as the Large Hadron Collider
(LHC), but as recent discoveries suggest may be present in the physical manipulation
of ordinary everyday objects. We will also see that nature has been and may be
engaged in the process of using scalar longitudinal waves (SLW) in many ways as
yet unsuspected and undetected by humanity. Some of these modalities of scalar
wave generation we will investigate will include the following: chemical bond
breaking, particularly as a precursor to seismic events (illuminating the study and
development of earthquake early warning system), solar events (related to eclipses),
and sunspot activity and how it impacts the earth’s magnetosphere. Moreover, this
overview of the unique aspects of the electroscalar domain will suggest that many of
the currently unexplained anomalies such as over-unity power observed in various
energy devices, and exotic energy effects associated with low-energy nuclear reac-
tions (LENR), may find some basis in fact.
In regards, to the latter “cold fusion or LENR fusion-type scenarios”, the
electroscalar wave might be the actual agent needed to reduce the nuclear Coulomb
barrier, thus providing the long-sought-out viable theoretical explanation of this
phenomenon. Longitudinal electrodynamic forces in exploding wires, etc. may
actually be due to the operation of electroscalar waves at the subatomic levels of
nature. For instance, the extraordinary energies produced by Ken Shoulder’s charge
clusters (i.e., particles of like-charge repel each other—that is one of the laws
describing the interaction between single subatomic particles) may also possibly
be due to electroscalar mechanisms. Moreover, these observations, spanning as they
do cross many cross-disciplines of science, beg the question as to the possible
universality of the SLW—that the concept of the longitudinal electroscalar wave,
not present in current electrodynamics, may represent a general, key, overarching
principle, leading to new paradigms in other science besides physics. This idea will
also be explored in the talk, showing the possible connection of scalar-longitudinal
(also known as, electroscalar) wave dynamics to biophysical systems. Admittedly,
we’re proposing quite an ambitious agenda in reaching for these goals, but I think
you will see that recent innovations will have proven equal to the task of supporting
this quest.
As you know from classical physics point of view, typically there are three kinds of
waves and wave equations that we can talk about (i.e., soliton wave is an exceptional
case and should be addressed separately).
2
archived by triple7inc
3
archived by triple7inc
4
archived by triple7inc
5
archived by triple7inc
(a)
Compression
B A
(b)
Compression
BA Rarefaction
(c)
Compression Compression
B A Rarefaction Rarefaction
(d)
A moves towards right, it compresses air particles near it, forming a com-
pression as shown in Fig. 6.3b. Due to vibrating air layers, this compression
moves forward as a disturbance.
As the prong A moves back to its original position, the pressure on its right
decreases, thereby forming a rarefaction. This rarefaction moves forward like
compression as a disturbance. As the tuning fork goes on vibrating, waves
consisting of alternate compressions and rarefactions spread in air as shown
in Fig. 6.3c, d. The direction of motion of the sound waves is same as that of
air particles; hence they are classified as longitudinal waves. The longitudinal
waves travel in the form of compressions and rarefactions.
The main parts of the sound wave are as follows:
The main parts of sound wave are listed below with their descriptions:
• Amplitude: The maximum displacement of a vibrating particle of the
medium from the mean position. A shows amplitude in y ¼ A sin(wt).
The maximum height of the wave is called its amplitude. If the sound is
more then the amplitude is more.
• Frequency: Number of vibrations made per second by the particles and is
denoted by f which is given as f ¼ 1/T and its unit: Hz. We can also get the
expression for angular frequency.
6
archived by triple7inc
where
∑ p ¼ increase in pressure at x position at time t
∑ p0 ¼ maximum increase in pressure
ω ¼ 2π f where f is frequency
If ∑ p and ∑ p0 are replaced by P and P0, then Eq. (6.1) has the following
form as
c
P ¼ P0 sin ω t ð6:2Þ
v
I
L ¼ log ð6:3Þ
I0
7
archived by triple7inc
Y ¼ a sin ðω t k xÞ ð6:4Þ
Here in both Eqs. (6.4) and (6.5) the symbol of a is basically designation of
the amplitude of reflected wave.
A sound wave is also reflected if it encounters a rarer medium or free
boundary or low-pressure region. A common example is traveling of a sound
wave in a narrow open tube. On reaching an open end, the wave gets
reflected. So, the force exerted on the particles there due to outside air is
quite small and hence the particles vibrate with increasing amplitude. Due to
this the pressure there tends to remain at the average value. This means that
there is no alteration in the phase of the wave, but the ultimate nature of the
wave has been altered; that is, on the reflection of the wave the compression is
reflected as rarefaction and vice versa.
The amplitude of the reflected wave would be a0 this time and Eq. (6.4)
becomes
y ¼ a0 sin ðω t þ k xÞ ð6:6Þ
3. Wave Interface
When listening to a single sine wave, amplitude is directly related to loudness and
frequency is directly related to pitch. When there are two or more simultaneously
sounding sine waves the wave interference takes place.
8
archived by triple7inc
1
1 Decibel ¼ bel ð6:7Þ
10
5. Timber
Timber can be called as the property which distinguishes two sounds and makes
them different from each other even when they have the same frequency. For
example, when we play violin and guitar on the same note and same loudness the
sound is still different. It is also denoted as tone color.
6. S-Waves
An S-wave is a wave in an elastic medium in which the restoring force is provided
by shear. S-waves are divergence-less:
!
— u¼ 0 ð6:9Þ
!
where u is the displacement of the wave, and comes in two polarizations:
(a) SV (vertical)
(b) SH (horizontal)
The speed of an S-wave is given by
rffiffiffi
μ
υs ¼ ð6:10Þ
ρ
9
archived by triple7inc
P-waves, that is also called pressure waves, are longitudinal waves; that is, the
oscillation occurs in the same direction (and opposite) as the direction of wave
propagation. The restoring force for P-waves is provided by the medium’s bulk
modulus. In an elastic medium with rigidity or shear modules being zero (μ ¼ 0),
a harmonic plane wave has the form
dP
K ¼ V ð6:12Þ
dV
where V is the volume and dP/dV is the derivative of pressure with respect to
volume.
The bulk modulus gives the change in volume of a solid substance as the
pressure on it is changed; then we can write
dP
K V
dV
ð6:13Þ
∂P
ρ
∂ρ
Consider a wave front with surface area A, and then the change in pressure of
the wave is given by the following relationship as
As we did mention above the pressure waves present the behavior and concept of
longitudinal waves; thus many of the important concepts and techniques used to
analyze transverse waves on a string as part of mechanical wave components can
also be applied to longitudinal pressure waves.
10
archived by triple7inc
You can see an illustration of how a pressure wave works in Fig. 6.4. As the
mechanical wave source moves through the medium, it pushes on a nearby segment
of the material, and that segment moves away from the source and is compressed
(that is, the same amount of mass is squeezed into a smaller volume, so the density of
the segment increases). That segment of increased density exerts pressure on adja-
cent segments, and in this way a pulse (if the source gives a single push) or a
harmonic wave (if the source oscillates back and forth) is generated by the source
and propagates through the material.
The “disturbance” of such waves involves three things: the longitudinal displace-
ment of material, changes in the density of the material, and variation of the pressure
within the material. So, pressure waves could also be called “density waves” or even
“longitudinal displacement waves,” and when you see graphs of the wave distur-
bance in physics and engineering textbooks, you should make sure that you under-
stand which of these quantities is being plotted as the “displacement” of the wave.
As you can see in Fig. 6.4, we’re still considering one-dimensional wave motion
(that is, the wave propagates only along the x-axis). But pressure waves exist in a
three-dimensional medium, so instead of considering the linear mass density μ
(as we did for the string in the previous section), in this case it’s the volumetric
mass density ρ that will provide the inertial characteristic of the medium. But just as
we restricted the string motion to small angles and considered only the transverse
component of the displacement, in this case we’ll assume that the pressure and
density variations are small relative to the equilibrium values and consider only
longitudinal displacement (so the material is compressed or rarefied only by changes
in the segment length in the x-direction).
The most straightforward route to finding the wave equation for this type of wave
is very similar to the approach used for transverse waves on a string, which means
you can use Newton’s second law to relate the acceleration of a segment of the
material to the sum of the forces acting on that segment. To do that, start by defining
the pressure (P) at any location in terms of the equilibrium pressure (ρ0) and the
incremental change in pressure produced by the wave (dP):
11
archived by triple7inc
P ¼ P0 þ dP ð6:15Þ
Likewise, the density (ρ) at any location can be written in terms of the equilibrium
density (ρ0) and the incremental change in density produced by the wave (aρ):
ρ ¼ ρ0 þ dρ ð6:16Þ
dP
K ð6:17Þ
dρ=ρ0
or
dρ
dP ¼ K ð6:18Þ
ρ0
With this relationship in hand, you are ready to consider Newton’s second law for
the segment of material being displaced and compressed (or rarefied) by the wave.
To do that, consider the pressure from the surrounding material acting on the left and
on the right sides of the segment, as shown in Fig. 6.5.
12
archived by triple7inc
Notice that the pressure (P1) on the left end of the segment is pushing in the
positive x-direction and the pressure on the left end of the segment is pushing in the
negative x-direction. Setting the sum of the x-direction forces equal to the acceler-
ation in the x-direction gives
X
F x ¼ P1 A P2 A ¼ max ð6:19Þ
where m is the mass of the segment. If the cross-sectional area of the segment is
A and the length of the segment is dx, the volume of the segment is Adx, and the mass
of the segment is this volume times the equilibrium density of the material:
m ¼ ρ0 Adx ð6:20Þ
Notice also that the pressure on the right end of the segment is smaller than the
pressure on the left end, since the source is pushing on the left end, which means that
the acceleration at this instant will be towards the right. Using the symbol ψ to
represent the displacement of the material due to the wave, the acceleration in the x-
direction can be written as
2
∂ ψ
ax ¼ ð6:21Þ
∂t 2
Substituting these expressions for m and ax into Newton’s second law Eq. (6.19)
gives
X 2
∂ ψ
F x ¼ P1 A P2 A ¼ ρ0 Adx ð6:22Þ
∂t 2
Writing the pressure P1 at the left end as P0 + dP1 and the pressure P2 at the right
end as P0 + dP2 means that
But the change in dP (that is, the change in the overpressure (or under-pressure)
produced by the wave) over the distance dx can be written as
∂ðdPÞ
Change in overpressure ¼ dP2 dP1 ¼ dx ð6:24Þ
∂x
which means
2
∂ðdPÞ ∂ ψ
dxA ¼ ρ0 Adx 2 ð6:25Þ
∂x ∂t
13
archived by triple7inc
or
2
∂ ψ ∂ðdPÞ
ρ0 ¼ ð6:26Þ
∂t 2 ∂x
But dP ¼ dρK/ρ0, so
h i
2
∂ ψ ∂ K
ρ dρ
ρ0 ¼ ð6:27Þ
0
∂t 2 ∂x
The next step is to relate the change in density (dρ) to the displacements of the left
and right ends of the segment (ψ 1 and ψ 2). To do that, note that the mass of the
segment is the same before and after the segment is compressed. That mass is the
segment’s density times its volume (m ¼ ρV) and the volume of the segment can be
seen in Fig. 6.4 to be V1 ¼ Adx before compression and V2 ¼ A(dx + dψ) after
compression. Thus
ρ0 V 1 ¼ ðρ0 þ dρÞV 2
ð6:28Þ
ρ0 ðAdxÞ ¼ ðρ0 þ dρÞAðdx þ dψ Þ
∂ψ
dψ ¼ dx ð6:29Þ
∂x
so
∂ψ
ρ0 ðAdxÞ ¼ ðρ0 þ dρÞA dx þ dx
∂x
∂ψ
ρ0 ¼ ðρ0 þ dρÞ 1 þ ð6:30Þ
∂x
∂ψ ∂ψ
¼ ρ0 þ dρ þ ρ0 þ dρ
∂x ∂x
Since we are restricting our consideration to the cases, in which the density
change (dρ) produced by the wave is small relative to the equilibrium density (ρ0),
the term dρ(∂ψ/∂x) must be small compared with the term ρ0(∂ψ/∂x). Thus to a
reasonable approximation we can write
∂ψ
dρ ¼ ρ0 ð6:31Þ
∂x
14
archived by triple7inc
! K ∂ψ
2 ∂ ρ0
∂ ψ ρ0 ∂x
ρ0 ¼
∂t 2 ∂x
ð6:32Þ
∂ψ
∂ K
∂x
¼
∂x
Rearranging makes this into an equation with a familiar form of wave equation in
one-dimensional:
2 2
∂ ψ ∂ ψ
ρ0 ¼K 2 ð6:33Þ
∂t 2 ∂x
or
∂ ψ ρ0 ∂ ψ
2 2
¼ ð6:34Þ
∂x 2 K ∂t 2
As in the case of transverse waves on a string, you can determine the phase speed
of a pressure wave by comparing the multiplicative term in the classical wave
equation of Eq. (6.35) below, with that in Eq. (6.34):
2 2
∂ ψ 1 ∂ ψ
¼ 2 ð6:35Þ
∂x 2 υ ∂t 2
1 ρ
¼ 0 ð6:36Þ
υ2 K
or
sffiffiffiffiffi
K
υ¼ ð6:37Þ
ρ0
As expected, the phase speed of the pressure wave depends both on the elastic (K )
and on the inertial (ρ0) properties of the medium. Specifically, the higher the bulk
modulus of the material (that is, the stiffer the material), the faster the components of
the wave will propagate (since K is in the numerator), and the higher the density of
the medium, the slower those components will move (since ρ0 is in the
denominator).
15
archived by triple7inc
Scalar longitudinal waves (SLW) are, conceived as longitudinal waves, as are sound
waves. Unlike the transversal waves of electromagnetism, which move up and down
perpendicularly to the direction of propagation, longitudinal waves vibrate in line
with the direction of propagation. Transversal waves can be observed in water
ripples: the ripples move up and down as the overall waves move outward, such
that there are two actions, one moving up and down, and the other propagating in a
specific direction outward.
Technically speaking, scalar waves have magnitude but no direction, since they
are imagined to be the result of two electromagnetic waves that are 180 out of phase
with one another, which leads to both signals being canceled out. This results in a
kind of “pressure wave.”
Mathematical physicist James Clerk Maxwell, in his original mathematical equa-
tions concerning electromagnetism, established the theoretical existence of scalar
waves. After his death, however, later physicists assumed that these equations were
meaningless, since scalar waves had not been empirically observed and they were
not repeatedly verified among the scientific community at large.
Vibrational or subtle energetic research, however, has helped advance our under-
standing of scalar waves. One important discovery states that there are many
different types of scalar waves, not just those of the electromagnetic variety. For
example, there are vital scalar waves (corresponding with the vital or “Qi” body),
emotional scalar waves, mental scalar waves, causal scalar waves, and so forth. In
essence, as far as we are aware, all “subtle” energies are made up of various types of
scalar waves.
Qi Body Qi can be interpreted as the “life energy” or “life force,” which flows
within us. Sometimes, it is known as the “vital energy” of the body. In
traditional Chinese medicine (TCM) theory, qi is the vital substance consti-
tuting the human body. It also refers to the physiological functions of organs
and meridians.
Some general properties of scalar waves (of the beneficial kind) include the
following:
• Travel faster than the speed of light
• Seem to transcend space and time
• Cause the molecular structure of water to become coherently reordered
• Positively increase immune function in mammals
• Are involved in the formation process in nature
See more details of SLW applications in the next section below.
16
archived by triple7inc
17
archived by triple7inc
Not all scalar waves, or subtle energies, are beneficial to living systems. Electro-
magnetism of the 60 Hz AC variety, for example, emanates a secondary longitudi-
nal/scalar wave that is typically detrimental to living systems.
However, to utilize the SLW as an application in biofield technology effectively,
we need to cancel the detrimental aspect of wave scale and transmit it into a
beneficial wave; therefore this innovative approach qualifies the medical application
of SLW, where we can approach that biomedical folks to suggest such invention and
ask for funding there as well. Last three bullet points are of vital interest in biofield
approach application of SLW.
18
archived by triple7inc
This is an area in which we may or could approach DOE or NRC with some RFP,
in particular Idaho National Laboratory (INL).
The scalar beam weapons were originally invented in 1904 by Nicola Tesla, an
American immigrant from Yugoslavia (1856 or 1857–1943). Since he died in 1943,
many nations have secretly developed his beam weapons, which now further refined
are so powerful that just by satellite one can make a nuclear-like destruction;
earthquake; hurricane; tidal wave; and instant freezing—killing every living thing
instantly over many miles. It can also cause intense heat like a burning fireball over a
wide area; induce hypnotic mind control over a whole population; or even read
anyone on the planet’s mind by remote. Due to the nature of behaving as a pressure
wave and carrying tremendous energy, SLW can remove something right out of its
place in time and space faster than the speed of light, without any detectable warning
by crossing two or more beams with each other. Moreover, any target can be aimed
at even right through to the opposite side of the earth. If either of the major scalar
weapon armed countries, e.g., the United States or Russia, were to fire a nuclear
missile to attack each other this may possibly not even reach the target, because the
missile could be destroyed with scalar technology before it even left its place or
origin. The knowledge via radio waves that it was about to be fired could be
eavesdropped and the target could be destroyed in the bunker, fired at from space
by satellite.
Above 60 Hz Ac frequency, this wave can be very detrimental in nature. A scalar
beam can be sent from a transmitter to the target, coupled with another sent from
another transmitter, and as they cross an explosion can be made. This interference
grid method could enable scalar beams to explode the missile before launch, as well
as en route with knowing the right coordinates. If the target does manage to launch,
what are known as Tesla globes or Tesla hemispheric shields can be sent to envelop a
missile or aircraft. These are made of luminous plasma, which emanates physically
from crossed scalar beams and can be created in any size, even over 100 miles
across. Initially detected and tracked as it moves on the scalar interference grid, a
continuous electromagnetic pulse (EMP) Tesla plasma globe could kill the electron-
ics of the target. More intensely hot Tesla “fireball” globes could vaporize the
missile. Tesla globes could also activate a missile’s nuclear warhead en route by
creating a violent low-order nuclear explosion. Various parts of the flying debris can
be subjected to smaller and more intense Tesla globes where the energy density to
destroy is more powerful than the larger globe first encountered. This can be done in
pulse mode with any remaining debris given maximum continuous heating to
vaporize metals and materials. If anything still rains down on Russia or the United
States, either could have already made a Tesla shield over the targeted area to block it
from entering the airspace.
Other useful aspect of SLW in military application: There is a community in the
United States that believes the scalar waves are realizable in its nature of
19
archived by triple7inc
! ! !
S ¼E B W=m2 ð6:38Þ
The energy per second crossing a unit area whose normal is pointed in
!
direction of S is the energy in the electromagnetic wave.
! !
A scalar wave has no time varying B field. In some cases, it also has no E field.
Thus, it has no energy propagated in the EM wave form. It must be realized
however that any vector could be added that may be integrated to zero over a
closed surface and Poynting theorem still applies. Thus, there is some ambiguity
in even stating the relationship that is given by Eq. (6.38), and that is the total EM
energy flow.
! ! !
2. The scalar wave could be accompanied by a vector potential A , and yet E and B
remain zero in the far field.
From EM theory, we can write as follows:
8 !
>
<! ! 1∂ A
E¼ — ϕ ð6:39Þ
> c ∂t
:! ! !
B¼— A
!
In this case ϕ is the scalar (electric) potential and A is the (magnetic) vector
potential. The Maxwell’s equations then predict the following mathematical
relation as
20
archived by triple7inc
2
1 ∂ ϕ
— 2ϕ ¼0 ðScalar Potential WavesÞ ð6:40Þ
c2 ∂t 2
!
2
1 ∂ A
!
— A 2
2
¼0 ðVector Potential WavesÞ ð6:41Þ
c ∂t 2
! ! !
A solution appears to exist for the special case of E¼ 0, B¼ 0, and — A¼ 0,
for a new wave satisfying the following relations:
8
! !
>
< A¼∇ S
1 ∂S ð6:42Þ
>
:ϕ ¼
c ∂t
2
1 ∂ S
— 2S ð6:43Þ
c2 ∂t 2
21
archived by triple7inc
This is the area where there are a lot of speculations among scientists, around the
community of electromagnetic and utilization of scalar wave as a weapon applica-
tion, and you find a lot of good as well as nonsense approaches in the Internet, by
different folks.
The present approach uses several approaches:
1. One is acoustic signals that travel slowly (1500 m/s in seawater).
2. A second is blue-green laser light that has a typical range of 270 m, and is readily
scattered by seawater particulates.
3. A third is high-frequency radio waves that are limited to a range of 7–10 m in
seawater at high frequencies.
4. A fourth is extremely low-frequency radio signals that are of long range (world-
wide) but transmit only a few characters per second for one-way, bell-ring calls to
individual submarines.
The new feature of this proposed work is the use of a novel electrodynamic
wave that has no magnetic field, and thus is not so severely constrained by the high
conductivity of seawater, as regular radio waves are. We have demonstrated the low
loss property of this novel (scalar longitudinal) wave experimentally by sending a
video signal through two millimeters of solid copper at 8 GHz.
If one has a background in physics or electrical engineering you know that
unquestionably our knowledge of the properties and dynamics of electromagnetic
systems is believed to be the most solid and firmly established in all classical
physics. By its extension, the application of quantum electrodynamics, describing
accurately the interaction of light and matter at the subatomic realms, has resulted in
the most successful theoretical scientific theory to date, agreeing with corresponding
experimental findings to astounding levels of precision. Accordingly, these devel-
opments have led to the belief among physicists that the theory of classical electro-
dynamics is complete and that it is essentially a closed subject.
22
archived by triple7inc
However, at least as far back to the era of Nikola Tesla, there have been continual
rumblings of discontent stemming from occasional physical evidence from both
laboratory experimental protocols and knowledge obtained from observation of
natural phenomena such as the dynamics of atmospheric electricity to suggest that
in extreme situations involving the production of high energies at specific frequen-
cies, there might be some cracks exposed in the supposed impenetrable monolithic
fortress of classical/quantum electrodynamics, implying possible key missing theo-
retical and physical elements. Unfortunately, some of these experimental phenom-
ena have been difficult to replicate and produce on-demand. Moreover, some have
been shown to apparently violate some of the established principles underlying
classical thermodynamics. On top of that, many of those courageous individuals
promoting the study of this phenomenon have couched their understanding of the
limited reliable experimental evidence available from these sources, in language
unfamiliar to the legion of mainstream technical specialists in electrodynamics,
preventing clear communication of these ideas. Also, the various sources that have
sought to convey this information have at times delivered contradictory statements.
It is therefore no wonder that for many decades, such exotic claims have been
disregarded, ignored, and summarily discounted by mainstream physics. However,
due to important developments over the past 2 years, there has been a welcome
resurgence of research in this area, bringing back renewed interest towards the
certification of the existence of these formerly rejected anomalous energy phenom-
ena. Consequently, this renaissance of the serious enterprise in searching for specific
weaknesses that currently plague a fuller understanding of electrodynamics has
propelled the proponents of this research to more systematically outline in a clearer
fashion the possible properties of these dynamics, how inclusion could change our
current understanding of electricity and magnetic, as well as implications for poten-
tial, vast, practical ramifications to the disciplines of physics, engineering, and
energy generation.
It is the purpose of this book and particularly this chapter to report on these
unique, various recent inventions and their possible modes of operation, but also to
convince those listening of their value for hopefully directing a future program
geared towards the rigorous clarification and certification, of the specific role the
electroscalar domain might play in shaping a future, consistent, classical, electrody-
namics—also by extension to perhaps shed light on current thorny conceptual and
mathematical inconsistencies that do exist, in the present interpretation of relativistic
quantum mechanics. In this regard, it is anticipated that by incorporating this more
expansive electrodynamic model, the source of the extant problems with gauge
invariance in quantum electrodynamics and the subsequent unavoidable divergences
in energy/charge might be identified and ameliorated.
Not only does the electroscalar domain have the potential to address such lofty
theoretical questions surrounding fundamental physics, but also another aim of this
chapter is to show that the protocol necessary for generating these field effects may
not be present only in exotic conditions involving large field strengths and specific
frequencies involving expensive infrastructure such as the large Hadron Collider
(LHC), but as recent discoveries suggest may be present in the physical manipulation
23
archived by triple7inc
of ordinary everyday objects. We will also see that nature has been and may be
engaged in the process of using scalar longitudinal waves (SLW) in many ways as
yet unsuspected and undetected by humanity. Some of these modalities of scalar
wave generation we will investigate will include the following: chemical bond
breaking, particularly as a precursor to seismic events (illuminating the study and
development of earthquake early warning system), solar events (related to eclipses),
and sunspot activity and how it impacts the earth’s magnetosphere. Moreover, this
overview of the unique aspects of the electroscalar domain will suggest that many of
the currently unexplained anomalies such as over-unity power observed in various
energy devices, and exotic energy effects associated with low energy nuclear
reactions (LENR), may find some basis in fact.
As we did mention at the beginning of this chapter, under Sect. 6.0, in regards to
the latter “cold fusion”-type scenarios, the electroscalar wave might be the actual
agent needed to reduce the nuclear Coulomb barrier, thus providing the long-sought-
after viable theoretical explanation of this phenomenon [4]. Longitudinal electrody-
namic forces in exploding wires, etc. may actually be due to the operation of
electroscalar waves at the subatomic levels of nature. For instance, the extraordinary
energies produced by Ken Shoulder’s charge clusters may also possibly be due to
electroscalar mechanisms. Moreover, these observations, spanning as they do cross
many cross-disciplines of science, beg the question as to the possible universality of
the SLW—that the concept of the longitudinal electroscalar wave, not present in
current electrodynamics, may represent a general, key, overarching principle, lead-
ing to new paradigms in other science besides physics. This idea will also be
explored in the talk, showing the possible connection of scalar longitudinal (also
known as electroscalar) wave dynamics to biophysical systems. Admittedly, we’re
proposing quite an ambitious agenda in reaching for these goals, but I think you will
see that recent innovations will have proven equal to the task of supporting this
quest.
Insight into the incompleteness of classical electrodynamics can begin with the
Helmholtz theorem, which states that any sufficiently smooth three-dimensional
vector field can be uniquely decomposed into two parts. By extension, a generalized
theorem exists, certified through the recent scholarly work of physicist-
mathematician Dale Woodside [5] (see Eq. (6.44) above as well) for unique decom-
position of a sufficiently smooth Minkowski four-vector field (three spatial dimen-
sions, plus time) into four-irrotational and four-solenoidal parts, together with the
tangential and normal components on the bounding surface. With this background,
the theoretical existence of the electroscalar wave can be attributed to failure to
include certain terms in the standard, general, four-dimensional, electromagnetic,
Lagrangian density that are related to the four-irrotational parts of the vector field.
Here, ε is electrical permittivity—not necessarily of the vacuum. Specifically, the
electroscalar field becomes incorporated in the structure of electrodynamics, when
we let Eq. (6.44) above for γ ¼ 1, and k ¼ (2π m c/h) ¼ 0. As we can see in this
representation as it is written for Eq. (6.44), it is the presence of the third term that
describes these new features.
24
archived by triple7inc
We can see more clearly how this term arises by writing the Lagrangian density in
terms of the standard electromagnetic scalar (ϕ) (see Eq. 6.45 above) and magnetic
vector potentials (A), without the electroscalar representation included. This equa-
tion has zero divergence of the potentials (formally called solenoidal), consistent
with classical electromagnetics, as we see here. The second class of four-vector
fields has zero curl of the potentials (irrotational vector field), which will emerge
once we add this scalar factor. Here we see that it is represented by the last term,
which is usually zero in standard classical electromagnetics. The expression in the
parentheses, when set equal to zero, describes what is known as the Lorentz
condition, which makes the scalar potential and the vector potential in their usual
form, mathematically dependent on each other. Accordingly, the usual electromag-
netic theory then specifies that the potentials may be chosen arbitrarily, based on the
specific, so-called, gauge that is chosen for this purpose. However, the MCE theory
allows for a nonzero value for this scalar-valued expression, essentially making the
potentials independent of each other, where this new scalar-valued component (C in
Eq. 6.45 that we may call it Lagrangian density) is a dynamic function of space and
time. It is from this new idea of independence of the potentials which the scalar value
(C) is derived, and from which the unique properties and dynamics of the scalar
longitudinal electrodynamic (SLW) wave arise.
To put all these in perspective, a more complete electrodynamic model may be
derived from this last equation of the Lagrangian density. The Lagrangian expres-
sion is important in physics, since invariance of the Lagrangian under any trans-
formation gives rise to a conserved quantity. Now, as is well known, conservation
of charge current is a fundamental principle of physics and nature. Conventionally,
!
in classical electrodynamics charged matter creates an E field. Motion of charged
!
matter creates a magnetic B field from an electrical current which in turn influences
! !
the B and E fields.
Before we continue further, let us write the following equations as
!
! ∂A
E ¼ — ϕ Relativistic Covariance ð6:46Þ
∂t
! ! ! !
B ¼— A Classical fields B and E
in terms of usual classical ð6:47Þ
! !
potentials A and ϕ
!
1 ∂ϕ ! ! !
C¼ 2 þ — A Classical wave equation for A , B ð6:48Þ
c ∂t
!
!1 ∂E ! ! !
— B 2 —C ¼ μ J E and ϕ without the use of a gauge ð6:49Þ
c ∂t
25
archived by triple7inc
! ∂C ρ
— E þ ¼ Condition the MCE theory produces
∂t ε
!
cancellation of ∂C=∂t and ∇C in the ð6:50Þ
! !
classical wave equation for ϕ and A ,
thus eliminating the need for a gauge condition
These effects can be modeled by Maxwell’s equations. Now, exactly how and to
what degree do these equations change when the new scalar-valued C field is
incorporated. Those of you who are knowledgeable of Maxwellian theory will
notice that the two homogeneous Maxwell’s equations—representing Faraday’s
! !
law and ∇ B (standard Gauss law equation for divergence-less magnetic field)—
are both unchanged from the classical model. Notice that the last three equations
incorporate this new scalar component which is labeled C. This formulation as
defined by Eq. (6.48) creates a somewhat revised version of Maxwell’s equations,
!
with one new term ∇ C in Gauss law (Eq. 6.50), where ρ is the charge density, and
one new term (∂C/∂t) in Ampere’s law (Eq. 6.49), where J is the current density. We
see that these new equations lead to some important conditions. First, relativistic
! !
covariance is preserved. Second, unchanged are the classical fields E and B in terms
! !
of the usual classical potentials A and ϕ . We have the same classical wave
! ! ! !
equations for A , ϕ , E , and B without the use of a gauge condition (and its attendant
incompleteness) since the MCE theory shows cancellation of ∂C/∂t and — C, the
! !
classical wave equations for ϕ and A ; and a scalar longitudinal wave (SLW) is
revealed, composed of the scalar and longitudinal electric fields.
A wave equation for C is revealed by use of the time derivative of Eq. (6.50),
added to divergence of Eq. (6.49). Now, as is known, matching conditions at the
interface between two different media are required to solve Maxwell’s equations.
The divergence theorem on Eq. (6.51) below will yield interface matching in the
normal component (“^ n ”) of — C/μ as shown in Eq. (6.15):
2
∂ C ∂ρ !
— C¼□ C¼μ
2 2
þ — J ð6:51Þ
∂c2 t 2 ∂t
—C —C
¼ ð6:52Þ
μ 1n μ 1n
Note: The above sets of Eqs. (6.51) and (6.52) present wave equation for scalar
factor C matching condition in normal component of — C/μ; spherically symmetric
2
wave solution for C; and the operator □2 ¼ ∂c∂2 t2 — 2 , and it is called d’Alembert
operator.
26
archived by triple7inc
! ð6:54Þ
>
> — J¼ 0 ! J ¼ —k
>
>
:
Gradient-Driven Current ! SLW
!
The sets of Eq. (6.54) are established for wave equation for B resulting gradient-
driven current in more complete electrodynamic (MCE) for generating scalar longi-
tudinal wave (SLW).
Notice again that the source of the magnetic field (right-hand side (RHS)) is a
!
nonzero value of — J , which signifies solenoidal current density, as is the case in
! ! !
standard Maxwellian theory. When B is zero, so is ∇ J . This is an important
result. Then the current density is irrotational, which implies that J ¼ — k. Here κ is a
scalar function of space and time. Thus, in contrast to closed current paths generated
in ordinary Maxwell theory which result in classical waves that arise from a
! !
solenoidal current density ∇ J 6¼ 0 , J for the scalar longitudinal wave (SLW)
is gradient driven and may be uniquely detectable. We also see from this result that a
27
archived by triple7inc
zero value of the magnetic field is a necessary and sufficient condition for this
gradient-driven current. Now, since in linearly conductive media the current density
! !
J is directly proportional to the electric field intensity E that produced it, where
!
σ is the conductivity, this gradient-driven current will then produce a longitudinal E
field.
!
Based on so far calculations, we can establish wave equation for E solution for
! ! !
longitudinal E in MCE spherically symmetric wave solutions for E and J in linearly
conductive media:
!
2 ! 2 !
∂ E ! ∂ ! !∂ J —ρ
— 2 E¼ —2 E □ E ¼ μ
2
ð6:55Þ
∂c t
2 2 ∂c2 t 2 ∂t ε
_
E ¼ E r r exp½jðkr ωt Þ=r ð6:56Þ
! ! !
J¼ σ E ! □2 J ¼ 0 ð6:57Þ
We can also see this from examining the standard vectorial wave equation for the
!
electric field. The wave equation for E (Eq. 6.55) arises from the curl of Faraday’s
! !
law, use of — B from Ampere’s law Eq. (6.49), and substitution of — E from
Eq. (6.50) with cancellation of the terms — (∂C/∂t) ¼ (∂/∂t)— C. When the RHS
of Eq. (6.50) is zero, the lowest order outgoing spherical wave is
_ _
E ¼ E r r exp½jðkr ωt Þ=r, where r represents the unit vector in the radial direction
and r represents the radial distance. The electrical field is also longitudinal. Substi-
! ! ! !
tution of J ¼ σ E into □2 E ¼ 0 results in □2 J ¼ 0, meaning that current density is
also radial. The SLW equations for E and J are remarkable for several reasons. First,
! !
the vector SLW equations for E and J are fully captured in one wave equation for the
scalar function (κ), □2κ ¼ 0. Second, these forms are like □2C ¼ 0. Third, these
equations have zero on the RHS for propagation in conductive media. This arises
! !
since B ¼ 0 for the SLW, implying no back electromagnetic field from ∂ B =∂t in
Faraday’s law which in turn gives no circulating eddy currents. Experimentation has
shown that the SLW is not subject to the skin effect in media with linear electric
conductivity, and travels with minimum resistance in any conductive media.
This last fact affords some insight into another related ongoing conundrum in
condensed matter physics—the mystery surrounding high-temperature supercon-
ductivity (HTS). As we know, the physical problem of high HTS is one of the
major unsolved problems in theoretical condensed matter physics, in part, because
the materials are somewhat complex, multilayered crystals.
28
archived by triple7inc
Here the more complete electrodynamic (MCE) theory may provide an explana-
tion on the basis of gradient-driven currents between (or among) the crystal layers.
The new MCE Hamiltonian (Eq. 6.16) includes the SLW due to gradient-driven
currents among the crystalline layers as an explanation for high temperature super-
conductivity (HTS).
The electrodynamic Hamiltonian for more complete electrodynamic (MCE) is
written as
2 ! !
εE B2 ! ! ! ! ! C 2 C ∇ A
H EM ¼ þ þ ρε ∇ E ϕJ Aþ þ ð6:58Þ
2 2μ 2μ μ
29
archived by triple7inc
of the rapidly approaching time where many of the encrusted and equally
ill-conceived still accepted paradigms of science, thought to underpin our sentient
reality, will fall by the wayside. On a grander panoramic scale, our expanding
knowledge gleaned from further examining the electroscalar wave concept, as
applied to areas of investigation such as cold fusion research and over-unity power
sources, will explicitly shape the future of society as well as science, especially
concerning our openness to phenomena that challenge our current belief systems.
To the point, the incompleteness in our received understanding of the properties
of electrodynamical systems can be attributed to the failure to properly incorporate
what can be termed the electroscalar force in the structural edifice of electrodynam-
ics. Unbeknownst to most specialists in the disciplines mentioned, over the last
decade in technological circles of development, there has quietly but inexorably
emerged bona fide physical evidence of the demonstration of the existence of scalar
longitudinal wave dynamics in recent inventions and discoveries. As technology
leads to new understanding, at this point we are certainly rapidly approaching a time
in which these findings can no longer be pushed aside or ignored by orthodox
physics, and physics must come to terms with their potential physical and philo-
sophical impacts on our world society. By the time you read this book, this author
thinks you might agree with the fact that we could be on the brink of a new era in
science and technology, the likes of which this generation has never seen before.
Despite what mainstream physics may claim, the study of electrodynamics is by no
means a closed book. Further details are provided in the following sections of this
chapter.
!
6.3 Description of B ð3Þ Field
During the investigation of the theory optically induced line shifts in nuclear
magnetic resonance (NMR), people have come across the result that the antisym-
metric part of the intensity tensor of light is directly proportional in free space to an
!
entirely novel, phase-free, magnetic field of light, which was identified as B ð3Þ field,
and which is defined in the following such as Eq. (6.59a–6.59c). The presence of
!
B ð3Þ in free space shows that the usual, propagating, transverse waves of electro-
!
magnetic radiation are linked geometrically to the spin field B ð3Þ , which indeed
emerges directly from the fundamental, classical equation of motion of a single
electron in a circularly polarized light beam [6]:
! ! !
B ð1Þ B ð2Þ ¼ i Bð0Þ B ð3Þ ð6:59aÞ
! ! !
B ð2Þ B ð3Þ ¼ i Bð0Þ B ð1Þ ð6:59bÞ
30
archived by triple7inc
!ð3Þ
6.3 Description of B Field 353
! ! !
B ð3Þ B ð1Þ ¼ i Bð0Þ B ð2Þ ð6:59cÞ
Note that the symbol of ( ) means conjugate form of the field, and super-scribe
(1), (2), and (3) can be permuted to give the other two equations in Eq. (6.1); hence
! ! !
the fields B ð1Þ , B ð2Þ , and B ð3Þ are simply components of the magnetic flux density of
free space electromagnetism in a circular, rather than in a Cartesian, basis. In the
!
quantum field theory, the longitudinal component B ð3Þ becomes the fundamental
photomagnetic of light, and operator defined by the following relationship as [7–12]
_
_ð3Þ ð0Þ P
B ¼B ð6:60Þ
h
_
where P is the angular momentum operator of one photon. The existence of the
_
longitudinal Bð3Þ in free space is indicated experimentally by optically induced NMR
shifts and by several well-known phenomena of magnetization by light, for example
the inverse Faraday effects.
The core logic of Eqs. (6.59a–6.59c) asserts that there exists a novel cyclically
symmetric field algebra in free space, implying that the usual transverse solutions of
Maxwell’s equations are tied to the longitudinal, nonzero, real, and physical mag-
!
netic flux density B ð3Þ , which we name the spin field. This deduction changes
fundamentally our current appreciation of electrodynamics and therefore the princi-
ples on which the old quantum theory was derived, for example the Planck law [13]
and the light quantum hypothesis proposed in 1905 by Einstein. The belated
!
recognition of B ð3Þ implies that there is a magnetic field in free space which is
associated with the longitudinal space axis, z, which is labeled (3) in the circular
basis. Conventionally, the radiation intensity distribution is calculated using only
two, transverse, degrees of freedom, right and left circular, corresponding to (1) and
(2) in the circular basis.
!
The B ð3Þ field of vacuum electromagnetism introduces a new paradigm of the field
theory, summarized in the cyclically symmetric equations linking it to the usual
! !
transverse magnetic plane wave components B ð1Þ ¼ B ð2Þ [3, 6, 14, 15].
!
The B ð3Þ field was first and obliquely inferred in January 1992 at Cornell
University from a careful, re-examination of known magneto-optics phenomena
[16, 17] which had previously been interpreted in orthodoxy through the conjugate
! ! ! !
product E ð1Þ E ð2Þ of electric plane wave components E ð1Þ E ð2Þ . In the inter-
vening three and a half years its understanding has developed substantially into
monographs and papers [3, 6, 14, 15] covering several fundamental aspects of field
theory.
!
The B ð3Þ field produces magnetization in an electron plasma which is proportional
to the square root of the power density dependence of the circularly polarized electro-
!
magnetic radiation, conclusive evidence for the presence of the phase-free B ð3Þ in the
31
archived by triple7inc
vacuum. There are many experimental consequences of this finding, some of which are
of practical utility, such as optical NMR. However, the most important theoretical
consequence is that there exist longitudinal components in free space of electromag-
netic radiation, a conclusion which is strikingly reminiscent of that obtained from the
theory of finite photon mass. The two ideas are interwoven throughout the volume. The
!
characteristic square root light intensity dependence of B ð3Þ dominates and is theoret-
ically observable at low cyclotron frequencies when intense, circularly polarized
electromagnetic radiation interacts with a single electron, or in practical terms an
electron plasma or beam. The magnetization induced in such an electron ensemble
by circularly polarized radiation is therefore expected to be proportional to the square
root of the power density (i.e., the intensity in watts per square meter) of the radiation.
This result emerges directly from the fundamental, classical, equation of motion of one
electron in the beam, the relativistic Hamilton-Jacobi equation.
!
To establish the physical presence of B ð3Þ in the vacuum therefore requires the
observation of this magnetization as a function of the beam’s power density, a
!
critically important experiment. Other possible experiments to detect B ð3Þ , such as
the optical equivalent of the Aharonov-Bohm effect, are suggested throughout the
volume.
More details about the subject in this section can be found in the references that
are mentioned in the count of this section and above and further details are beyond
the scope of this book. Thus, we encourage the readers to refer themselves to those
references from [3, 6–12, 14–17].
What is a “scalar wave” exactly? Scalar wave (SW) is just another name for a
longitudinal wave (LW). The term “scalar” is sometimes used instead because the
hypothetical source of these waves is thought to be a “scalar field” of some kind
similar to the Higgs field for example.
In general, definition of longitudinal wave falls into the following description:
A wave motion in which the particles of the medium oscillate about their mean
positions in the direction of propagation of the wave is called longitudinal wave.
For longitudinal wave the vibration of the particles of the medium is in the
direction of wave propagation. A longitudinal wave proceeds in the form of com-
pression and rarefaction which is the stretch and compression in the same direction
as the wave moves. For a longitudinal wave at places of compression the pressure
and density tend to be maximum, while at places where rarefaction takes place the
pressure and density are minimum. In gases only longitudinal wave can propagate.
Longitudinal waves are known as compression waves.
A longitudinal wave travels through a medium in the form of compressions or
condensations C and rarefaction R. A compression is a region of the medium in
32
archived by triple7inc
Transverse wave
Wavelength
Compression Expansion
which particles are compressed, i.e., particles come closer, i.e., distance between the
particles becomes less than the normal distance between them. Thus, there is
temporary decrease in volume and as a consequence increase in density of the
medium in the region of compression. A rarefaction is a region of the medium in
which particles are rarefied, i.e., particles get farther apart than what they normally
are. Thus, there is temporary increase in volume and a consequence decrease in
density of the medium in the region of rarefaction. See Fig. 6.6.
There is nothing particularly controversial about longitudinal waves (LW) in
general. They are a ubiquitous and well-acknowledged phenomenon in nature.
Sound waves traveling through the atmosphere (or underwater) are longitudinal, as
are plasma waves propagating through space (also known as Birkeland currents).
Longitudinal waves moving through the earth’s interior are known as “telluric
currents.” They can all be thought of as pressure waves of sorts.
SW/LW are quite different from “transverse” waves. You can observe transverse
waves (TW) by plucking a guitar string or watching ripples on the surface of a pond.
They oscillate (vibrate, move up and down, or side to side) perpendicular to their
arrow of propagation (directional movement). Comparatively SW/LW oscillate in
the same direction as their arrow of propagation. See Fig. 6.6.
In modern-day electrodynamics (both classical and quantum), electromagnetic
waves (EMW) traveling in “free space” (such as photons in the “vacuum”) are
generally considered to be TW. But this was not always the case. When the
preeminent mathematician James Clerk Maxwell first modeled and formalized his
unified theory of electromagnetism in the late nineteenth century neither the EM
SW/LW nor the EM TW had been experimentally proven, but he had postulated and
calculated the existence of both.
After Heinrich Hertz demonstrated experimentally the existence of transverse
radio waves in 1887, theoreticians (such as Heaviside, Gibbs, and others) went about
33
archived by triple7inc
revising Maxwell’s original equations (who was now deceased and could not
object). They wrote out the SW/LW component from the original equations because
they felt the mathematical framework and theory should be made to agree only with
experiment. Obviously, the simplified equations worked—they helped make the
AC/DC electrical age engineerable. But at what expense?
Then in 1889 Nikola Tesla, a prolific experimental physicist and inventor of
alternative current (AC), threw a proverbial wrench in the works when he discovered
experimental proof for the elusive electric scalar wave. This seemed to suggest that
SW/LW, opposed to TW, could propagate as pure electric waves or as pure magnetic
waves. Tesla also believed that these waves carried a hitherto-unknown form of
excess energy he referred to as “radiant.” This intriguing and unexpected result was
said to have been verified by Lord Kelvin and others soon after.
However, instead of merging their experimental results into a unified proof for
Maxwell’s original equations, Tesla, Hertz, and others decided to bicker and squab-
ble over who was more correct. In actuality they both derived correct results. But
because humans (even “rational” scientists) are fallible and prone to fits of vanity
and self-aggrandizement, each side insisted dogmatically that they were right, and
the other side was wrong.
The issue was allegedly settled after the dawn of the twentieth century when:
(a) The concept of the mechanical (passive/viscous) ether was purportedly
disproven by Michelson-Morley and replaced by Einstein’s relativistic space-
time manifold.
(b) Detection of SW/LWs proved much more difficult than initially thought (mostly
due to the wave’s subtle densities, fluctuating frequencies, and orthogonal
directional flow). As a result, the truncation of Maxwell’s equations was upheld.
SW/LW in free space however are quite real. Beside Tesla, empirical work
carried out by electrical engineers such as Eric Dollard, Konstantin Meyl, Thomas
Imlauer, and Jean-Louis Naudin (to name only some) have clearly demonstrated
their existence experimentally. These waves seem able to exceed the speed of light,
pass through EM shielding (also known as Faraday cages), and produce over-unity
(more energy out than in) effects. They seem to propagate in a yet-unacknowledged
counter-spatial dimension (also known as hyperspace, pre-space, false-vacuum,
Aether, implicit order, etc.).
Because the concept of an all-pervasive material ether was discarded by most
scientists, the thought of vortex-like electric and/or magnetic waves existing in free
space, without the support of a viscous medium, was thought to be impossible.
However later experiments carried out by Dayton Miller, Paul Sagnac,
E.W. Silvertooth, and others have contradicted the findings of Michelson and
Morley. More recently Italian mathematician-physicist Daniele Funaro, American
physicist-systems theorist Paul LaViolette, and British physicist Harold Aspden
have all conceived of (and mathematically formulated) models for a free space
ether that is dynamic, fluctuating, and self-organizing, and allows for the formation
and propagation of SW/LW.
34
archived by triple7inc
35
archived by triple7inc
be longitudinal. For lower frequencies, the electric field between the capacitor plates
remains quasi-static and therefore longitudinal too.
We do not want to go deeper into this subject here. Having given hints for the
possible existence of longitudinal electric and magnetic fields, we leave this area and
concentrate on mechanisms which allow transmission of signals even without any
detectable electromagnetic fields.
Before we move on with more details of scalar wave we need to lay ground about
the types of waves, where the scalar wave falls under that category; thus we need to
have some idea about transverse wave and longitudinal wave and what their
descriptions are. This is the subject that was discussed in previous section of this
chapter quite extensively; however, we talk furthermore about the subject of longi-
tudinal potential wave in the next section here.
!
E¼ 0 ð6:61Þ
!
B¼ 0 ð6:62Þ
! !_
E ¼ — U A ð6:63Þ
! ! !
B ¼∇ A ð6:64Þ
! !
with electric scalar potential U and magnetic vector potential A . The dot above the A ,
in Eq. (6.63), denotes the time derivative. For the vacuum, conditions as stated in
Eq. (6.61) and Eq. (6.62) will lead to the following sets of equations:
36
archived by triple7inc
!_
— U ¼ A ð6:65Þ
! !
∇ A¼ 0 ð6:66Þ
From Eq. (6.66), it follows immediately that the vector potential is vortex free,
representing a laminar flow. The gradient of the scalar potential is coupled to the
time derivative of the vector potential, so both are not independent of one another. A
general solution of these equations was derived in [22]. This is a wave solution
!
where A is in the direction of propagation, i.e., this is a longitudinal wave. Several
wave forms are possible, which may even result in a propagation velocity different
from the speed of light c. As a simple example we assume a sine-like behavior of
!
vector potential A as
! ! ! !
A ¼ A sin k x ωt ð6:67Þ
0
! !
with direction of propagation k (wave vector), space coordinate vector x , and time
frequency ω. Then it follows from Eq. (6.66) that
! ! !
— U ¼ A ω cos k x ωt ð6:68Þ
0
This condition has to be met for any potential U. We make the approach as
! !
U ¼ U 0 sin k x ωt ð6:69Þ
To find that
! !
— U ¼ kU 0 cos k x ωt ð6:70Þ
!
which, compared to Eq. (6.68), defines the constant A to be as
0
! ! U0
A ¼k ð6:71Þ
0 ω
!
Obviously, the waves of A and U have the same phase. Next, we consider the
energy density of such a combined wave. This is in general given by
37
archived by triple7inc
1 ! 1 !2
w ¼ ε0 E 2 þ B ð6:72Þ
2 2μ0
From Eqs. (6.65) and (6.66), it is seen that the magnetic field disappears identi-
cally, but the electric field is a vanishing sum of two terms, which are different
from zero.
These two terms evoke an energy density of space where the wave propagates.
This cannot be obtained out of the force fields (these are zero) but must be computed
from the constituting potentials. As discussed in the paper by (Eckardt and
Lindstrom) [20], we have to write
1 !_
2
w ¼ ε 0 A þ ð— U Þ
2
ð6:73Þ
2
! !
w ¼ ε0 k2 U 20 cos 2 k x ωt ð6:74Þ
This is an oscillating function, meaning that the energy density varies over space
and time in phase with the propagation of the wave. All quantities are depicted in
Fig. 6.8. Energy density is maximal where the potentials cross the zero axis.
There is a phase shift of 90 between both plots that can be observed in Fig. 6.8.
There is an analogy between longitudinal potential waves and acoustic waves. It
is well known that acoustic waves in air or solids are mainly longitudinal too. The
!
Fig. 6.8 Phases of potentials A and U, and energy density w
38
archived by triple7inc
! !_ —p
F¼ u þ ð6:75Þ
ρ
!
In Eq. (6.75), the term u is the velocity field, p is the pressure, and ρ is the density
of the medium.
This is in full analogy to Eq. (6.63). In particular we see that in the electromag-
netic case space-time must be “compressible”; otherwise there will be no gradient of
the scalar potential. As a consequence, space itself must be compressible, leading us
to the principles of general relativity.
A sender for longitudinal potential waves has to be a device which avoids producing
! !
E and B fields but sends out oscillating potential waves. We discuss two propositions
on how this can be achieved technically. In the first case, we use two ordinary
transmitter antennas (with directional characteristic) with distance of half a wave-
length (or an odd number of half-waves). This means that ordinary electromagnetic
waves cancel out, assuming that the near field is not disturbing significantly. Since
39
archived by triple7inc
the radiated energy cannot disappear, it must propagate in space and is transmitted in
the form of potential waves. This is depicted in Fig. 6.10.
A more common example is a bifilar flat coil, for example from the patent of Tesla
[23]; see Fig. 6.10, second drawing. The currents in opposite directions affect
annihilation of the magnetic field component, while an electric part may remain
due to the static field of the wires. See Fig. 6.11.
Construction of a receiver is not so straightforward. In principle no magnetic field
!
can be retrieved directly from A due to Eq. (6.66). The only way is to obtain an
electrical signal by separating both contributing parts in Eq. (6.63) so that the
equality [22] is out weighted and an effective electric field remains which can be
detected by conventional devices. A very simple method would be to place two
plates of a capacitor in distance of half a wavelength (or odd multiples of it). Then
the voltage in space should have an effect on the charge carriers in the plates, leading
to the same effect as if a voltage had been applied between the plates. The real
voltage in the plates or the compensating current can be measured (Fig. 6.12). The
“tension of space” operates directly on the charge carriers while no electric field is
!_
induced. The A part is not contributing because the direction of the plates is
perpendicular to it, i.e., no significant current can be induced.
Another possibility of a receiver is to use a screened box (Faraday cage). If the
mechanism described for the capacitor plates is valid, the electrical voltage part of
the wave creates charge effects which are compensated immediately due to the high
conductivity of the material. As is well known, the interior of a Faraday cage is free
of electric fields. The potential is constant because it is constant on the box surface.
Therefore, only the magnetic part of the wave propagates in the interior where it can
be detected by a conventional receiver; see Fig. 6.13.
40
archived by triple7inc
41
archived by triple7inc
Fig. 6.13 Suggestion for a receiver of longitudinal potential waves (Faraday cage)
engineered through chemical vapor deposition of carbon. In the process you get
strong lightweight crystalline shapes that can handle lots of heat and stress by high
currents. For detecting longitudinal waves, the excitation of the electronic system
has to be measured, for example by photoemission or other energetic processes in the
crystal.
All these are suggestions for experiments with longitudinal waves. Additional
experiments can be performed for testing the relation between wave vector k and
frequency ω to check if this type of waves propagates with ordinary velocity of light
c as
ω
c¼ ð6:76Þ
k
2π
k¼ ð6:77Þ
λ
As pointed out in the paper by Eckhardt [22], the speed of propagation depends
on the form of the waves.
This can even be a nonlinear step function. The experimental setup of Fig. 6.11
!
can directly be used for finding the ω k relation because the wavelength and
frequency are measured at the same time. There are rumors that Eric P. Dollard [24]
found a propagation speed of longitudinal waves of (π/2) c, which is 1.5 times the
speed of light, but there are no reliable experiments on this reported in the literature.
42
archived by triple7inc
The ideas worked out in this write-up in this section may not be the only way how
longitudinal waves can be explained and technically handled. As mentioned in the
introduction, electrodynamics derived from a unified field theory (Evens et al.) [19]
predicts effects of polarization in all space and time dimensions and may lead to a
discovery of even richer and more interesting effects.
The basic scalar communication system indicates that the communications antenna
does not make any sense according to normal electromagnetic theory. The goal of a
scalar antenna is to create powerful repulsion/attraction between two magnetic fields,
to create large scalar bubbles/voids. This is done by using an antenna with two
opposing electromagnetic coils that effectively cancel out as much of each other’s
magnetic field as possible. An ideal scalar antenna will emit no electromagnetic field
(or as little as possible), since all power is being focused into the repulsion/attraction
between the two opposing magnetic fields. Normal electromagnetic theory suggests
that since such a device emits no measurable electromagnetic field, it is useless and
will only heat up.
A scalar signal reception antenna similarly excludes normal electromagnetic
waves and only measures changes in magnetic field attraction and repulsion. This
will typically be a two-coil-powered antenna that sets up a static opposing or
attracting magnetic field between the coils, and the coils are counter-wound so that
any normal RF signal will be picked up by both coils and effectively cancel itself out.
It has been suggested that scalar fields do not follow the same rules as electro-
magnetic waves and can penetrate through materials that would normally slow or
absorb electromagnetic waves. If true, a simple proving method is to design a scalar
signal emitter and a scalar signal receiver and encasing each inside separate shielded
and grounded metal box, known as Faraday cages. These boxes will absorb all
normal electromagnetic energy and will prevent any regular non-scalar signal trans-
missions from passing from one box to the other.
Some people have suggested that organic life may make use of scalar energies in
ways that we do not yet understand. Therefore, caution is recommended when
experimenting with this fringe technology. However, keep in mind that if scalar
fields do exist, we are likely already deeply immersed in an unseen field of scalar
noise all the time, generated anywhere two magnetic fields oppose or attract.
Common scalar field noise sources include AC electric cords and powerlines
carrying high current, and electric motors which operate on the principle of powerful
spinning regions of repulsion and attraction.
43
archived by triple7inc
It can be shown that scalar waves, normally remaining unnoticed, are very interest-
ing in practical use for information and energy technology for reason of their special
attributes. The mathematical and physical derivations are supported by practical
experiments. The demonstration will show:
1. The wireless transmission of electrical energy
2. The reaction of the receiver to the transmitter
3. Free energy with an over-unity effect of about 3
4. Transmission of scalar waves with 1.5 times the speed of light
5. The inefficiency of a Faraday cage to shield scalar waves
Here is shown extraordinary science, five experiments, which are incompatible with
textbook physics. Following short courses, that were given by Meyl [25], show the
transmission of longitudinal electric waves.
It is a historical experiment, because already 100 years ago the famous experi-
mental physicist Nikola Tesla has measured the same wave properties, as me. From
him stems a patent concerning the wireless transmission of energy (1900) [26]. Since
he also had to find out that at the receiver arrives more energy very much, than the
transmitter takes up, he spoke of a “magnifying transmitter”.
By the effect back on the transmitter Tesla sees if he has found the resonance of
the earth and that lies according to his measurement at 12 Hz. Since the Schumann
resonance of a wave, which goes with the speed of light, however, lies at 7.8 Hz,
Tesla comes to the conclusion that his wave has 1.5 times the speed of light c [27].
As founder of the diathermy Tesla already has pointed to the biological effec-
tiveness and to the possible use in medicine. The diathermy of today has nothing to
do with the Tesla radiation; it uses the wrong wave and as a consequence hardly has
a medical importance.
The discovery of the Tesla radiation is denied and isn’t mentioned in the
textbooks anymore. For that there are two reasons:
1. No high school ever has rebuilt a “magnifying transmitter.” The technology
simply was too costly and too expensive. In that way the results have not been
reproduced, as it is imperative for an acknowledgement. I have solved this
problem using modern electronics, by replacing the spark gap generator with a
function generator and the operation with high tension with 2–4 V low tension.
Meyl [25] sells the experiment as a demonstration set so that it is reproduced as
often as possible. It fits in a case and has been sold more than 100 times. Some
universities already could confirm the effects. The measured degrees of effec-
tiveness lie between 140% and 1000%.
44
archived by triple7inc
2. The other reason why this important discovery could fall into oblivion is to be
seen in the missing of a suitable field description. The Maxwell equations in any
case only describe transverse waves, for which the field pointers oscillate per-
pendicular to the direction of propagation.
The vectorial part of the wave equation derived from the Maxwell equation is
presented here as
8 !
>
> ∂B
>! !
>
>
> ∇ E¼
>
> ∂t
>
> !
>
>
< ∇ H¼ J þ ∂ D
> ! ! !
∂t ð6:78Þ
>
> ! !
>
> B¼ μ H
>
>
>
> ! !
>
> D¼ ε E ) In Linear Media
>
>
>
:!
J¼ 0
and
! ! !
2 !
! ! ! ∂ ∇H ∂ E
∇ ∇ E ¼ μ ¼ με ð6:79Þ
∂t ∂t 2
Then, from the result of Eqs. (6.78) and (6.79), we obtain the wave equation as
( !
! ! ! !
! ! ! 1 ∂2 E 1
— E ¼∇ ∇ E ∇ ∇ E ¼ c2 ∂t 2 με ¼ c2
2 ð6:80Þ
See Chap. 4 of this book for more details on derivation of wave equations from
Maxwell’s equation.
Note that in all these calculations, the following symbols do apply:
!
E ¼ Electric filed or electric force
!
H ¼ Auxiliary field or magnetic field
! ! !
D ¼ Electric displacement (D¼ ε E in linear medium)
!
B ¼ Magnetic intensity or magnetic induction
!
J ¼ Current density
45
archived by triple7inc
Now breaking down the first equation in the sets of Eq. (6.80) will be as follows:
! ! ! 2 !
! ! ! ! 1 ∂ E
—ffl{zffl
|ffl
2
E
ffl} ¼ ∇ ∇E ∇ ∇E ¼ 2 ∂t 2
ð6:81Þ
|fflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl{zfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl} c|fflfflfflffl{zfflfflfflffl}
Laplace ! ! c is speed of light
! If ∇ E ¼ 0 then we have Transversal Wave
operator over E ! !
If ∇ E ¼ 0 then we have Longitudinal Wave
! !
Note that in Eq. (6.81) if ∇ E 6¼ 0, then we have situation that is providing the
scalar wave conditions, while the following relationships do apply as well:
8 " #
2
> ! ! ! 1 ∂ ϕ
>
>
!
= 2 2
= ∇ E ¼ ∇
! ! < ð 1Þ ∇ c ∂t
E ¼ ∇ ϕ :
>
> ! ! ! !
ð6:82Þ
>
: ð2Þ ∇ E ¼ ∇ ∇ϕ
! ! ! ! ρ
∇ D¼ ρ : ð3Þ ∇ E ¼
ε
The results found in Eq. (6.81) through Eq. (6.82) are the scalar part of the wave
equation describing the longitudinal electric waves, which ends up with deviation of
plasma waves, as it is seen in Eq. (6.83). In these equations symbol of ϕ is
representation of scalar field, as described in Chap. 4 of this book.
If we derive the field vector from a scalar potential ϕ, then this approach
immediately leads to an inhomogeneous wave equation, which is called plasma
wave. Solutions are known, like the electron plasma waves, which are longitudinal
oscillations of the electron density (Langmuir waves).
The Tesla experiment and my historical rebuild however show more. Such longitu-
dinal waves obviously exist even without plasma in the air and even in vacuum. The
!
question thus is asked: What the divergence E describes in this case?
1. How is the impulse passed on, so that a longitudinal standing wave can form?
2. How should a shock wave come about, if there are no particles which can push
each other?
46
archived by triple7inc
We have solved this question, by extending Maxwell’s field theory for vortices of
the electric field. These so-called potential vortices are able to form structure and they
propagate in space for reason of their particle nature as a longitudinal shock wave. The
model concept is based on the ring vortex model of Hermann von Helmholtz, which
Lord Kelvin did make popular. In Volume 3 of the Meyl book under the title of
Potential Vortex [1], the mathematical and physical derivation is described.
In spite of the field theoretical set of difficulties every physicist at first will seek
for a conventional explanation. We will try three approaches as follows:
1. Resonant circuit interpretation
2. Near-field interpretation
3. Vortex interpretation
The details of these two approaches are given in the two following subsections.
Tesla had presented his experiment to, among others, Lord Kelvin, and 100 years
ago Tesla had spoken of a vortex transmission. In the opinion of Kelvin, however,
vortex transmission by no means concerns a wave but rather radiation. Kelvin had
recognized clearly that every radio-technical interpretation had to fail, because alone
the course of the field lines is a completely different one.
It presents itself to assume a resonant circuit, consisting of a capacitor and an
inductance (refer to Fig. 6.14). If both electrodes of the capacitor are pulled apart,
then between both stretches an electric field. The field lines start at one sphere, the
transmitter, and they bundle up again at the receiver. In this manner, a higher degree
of effectiveness and a very tight coupling can be expected. In this manner, without
doubt some, but not all, of the effects can be explained.
The inductance is split up in two air transformers, which are wound in a
completely identical fashion. If a fed in sinusoidal tension voltage is transformed
up in the transmitter, then it is again transformed down at the receiver. The output
voltage should be smaller or, at most, equal to the input voltage, but it is substantially
bigger!
An alternative wiring diagram can be drawn and calculated, but in no case does
the measurable result that light-emitting diodes at the receiver glow brightly
(U > 2 V) occur, whereas at the same time the corresponding light-emitting diodes
at the transmitter go out (U < 2 V)! To check this result, both coils are exchanged.
The measured degree of effectiveness lies despite the exchange at 1000%. If the
law of conservation of energy is not to be violated, then only one interpretation is
left: The open capacitor withdraws field energy from its environment. Without
consideration of this circumstance, the error deviation of every conventional
model calculation lies at more than 90%. In this case, one should do without the
calculation.
The calculation will concern oscillating fields, because the spherical electrodes
change in polarity with a frequency of approximately 7 MHz. They are operated in
47
archived by triple7inc
resonance. The condition for resonance reads as identical frequency and opposite
phase. The transmitter obviously modulates the field in its environment, while the
receiver collects everything that fulfills the condition for resonance.
Also, in the open question regarding the transmission velocity of the signal, the
resonant circuit interpretation fails. But the HF technician still has another explana-
tion on the tip of his tongue.
At the antennae of a transmitter in the near field (a fraction of the wavelength), only
scalar waves (potential vortex) exist. They decompose into electromagnetic (EM) in
the far field and further. The near field is not described by Maxwell’s equations and
48
archived by triple7inc
Fig. 6.15 The coming off of the electric field lines of the dipole
the theory is only postulated. It is possible to pick up only scalar waves from radio
transmissions. Receivers which pick up EM waves are actually converting those
waves into potential vortices which are conceived as “standing waves.”
It presents itself to assume a resonant circuit, consisting of a capacitor and an
inductance (refer to Fig. 6.15). If both electrodes of the capacitor are pulled apart,
then between both stretches an electric field. The field lines start at one sphere, the
transmitter, and they bundle up again at the receiver. In this manner, a higher degree
of effectiveness and a very tight coupling can be expected. In this manner, without
doubt some, but not all, of the effects can be explained.
In the near field of an antenna effects are measured, which on the one hand go as
inexplicable, because they evade the normally used field theory, which on the other
hand it shows scalar wave effects very close. Everyone knows a practical applica-
tion: e.g., at the entrance of department stores, where the customer has to go through
in between of scalar wave detectors.
In Meyl’s experiment [25] the transmitter is situated in the mysterious near zone.
Also, Tesla always worked in the near zone. But who asks for the reasons will
discover that the near-field effect is nothing else but the scalar wave part of the wave
equation. Meyl’s explanation goes as follows:
The charge carriers which oscillate with high frequency in an antenna rod form
longitudinal standing wave. As a result, also, the fields in the near zone of a Hertzian
dipole are longitudinal scalar wave fields. The picture shows clearly how vortices
are forming and how they come off the dipole.
Like for the charge carriers in the antenna rod the phase angle between current
and tension voltage amounts to 90 , in the near field also the electric and the
magnetic field phase shifted for 90 . In the far field however, the phase angle is
zero. In my interpretation the vortices are breaking up, they decay, and transverse
radio waves are formed.
The vortex decay however depends on the velocity of propagation. Calculated at the
speed of light the vortices already have decayed within half the wavelength. The
49
archived by triple7inc
faster the velocity, the more stable they get to remain stable above 1.6 times the
velocity. These very fast vortices contract in the dimensions. They now can tunnel.
Therefore, speed faster than light occurs at the tunnel effect. Therefore, no Faraday
cage is able to shield fast vortices.
Since these field vortices with particle nature following the high-frequency
oscillation permanently change their polarity from positive to negative and back,
they do not have a charge on the average over time. As a result, they almost
unhindered penetrate solids. Particles with this property are called neutrinos in
physics. The field energy which is collected in my experiment is that which stems
from the neutrino radiation which surrounds us. Because the source of this radiation,
all the same if the origin is artificial or natural, is far away from receiver, every
attempt of a near-field interpretation goes wrong. After all, does the transmitter
installed in the near-field zone supply less than 10% of the received power? The 90%
however, which it concerns here, cannot stem from the near-field zone!
6.7.3 Experiment
In Meyl’s experimental setup he also takes few other steps in order to conduct his
experiment that is reported here [25].
At the function generator he adjusts frequency and amplitude of the sinusoidal
signal, with which the transmitter is operated. At the frequency regulator I turn so
long, till the light-emitting diodes at the receiver glow brightly, whereas those at the
transmitter go out. Now an energy transmission takes place.
If the amplitude is reduced so far, till it is guaranteed that no surplus energy is
radiated, then in addition a gain of energy takes place by energy amplification.
If we take down the receiver by pulling out the earthing, then the lighting up of
the LED signals (light-emitting diode) the mentioned effect back on the transmitter.
The transmitter thus feels if its signal is received.
The self-resonance of the Tesla coils, according to the frequency counter, lies at
7 MHz. Now the frequency is running down and at approx. 4.7 MHz the receiver
again glows, but less brightly, easily shieldable, and without discernible effect back
on the transmitter. Now we unambiguously are dealing with the transmission of the
Hertzian part and that goes with the speed of light. Since the wavelength was not
changed, does the proportion of the frequencies determine the proportion of the
velocities of propagation? The scalar wave according to that goes with (7/4.7¼) 1.5
times the speed of light.
If we put the transmitter into the aluminum case and close the door, then nothing
should arrive at the receiver. Expert laboratories for electromagnetic compatibility in
this case indeed cannot detect anything and in spite of that the receiver lamps glow!
By turning off the receiver coil, it can be verified that an electric and not a magnetic
coupling is present although the Faraday cage should shield electric fields. The scalar
wave obviously overcomes the cage with a speed faster than light, by tunneling. We
can summarize what we have discussed so far in respect to scalar wave in the next
subsection of this chapter as follows.
50
archived by triple7inc
6.8 Summary
Konstantin Meyl is a German professor who developed a new unified field theory
based on the work of Tesla. Meyl’s unified field and particle theory explains
quantum and classical physics, mass, gravitation, constant speed of light, neutrinos,
waves, and particles, all explained by vortices. The subatomic particle characteristics
are accurately calculated by this model. Well-known equations are also derived by
the unified equation. He provides a kit replicating one of Tesla’s experiments which
demonstrates the existence of scalar waves. Scalar waves are simply energy vortices
in the form of particles. Here is an interview with Konstantin Meyl on his theory and
technologies.
The unified field theory describes the electromagnetic, eddy current, potential
vortex, and special distributions. This combines an extended wave equation with a
Poisson equation. Maxwell’s equations can be derived as a special case where
Gauss’s law for magnetism is not equal to 0. That means that magnetic charges do
exist in Meyl’s theory [25]. That electric and magnetic fields are always generated by
motion is the fundamental idea which this equation is derived from. The unipolar
generator and transformer have conflicting theories under standard theories. Meyl
splits them into the equations of transformation of the electric and magnetic fields
separately which describes unipolar induction and the equation of convection,
relatively.
Meyl says that the field is always first, which generates particles by decay or
conversion. Classical physics does not recognize energy particles aka potential
vortices, so they were not included in the theory. Quantum physics effectively
tried to explain everything with vortices, which is why it is incomplete. The
derivation of Schrodinger’s equation from the extended Maxwell equations means
they are vortices. For example, photons are light as particle vortices and electro-
magnetic (EM) light is in wave form which depends on the detection method which
can change the form of light.
Gravitation is from the speed of light difference caused by proximity, which
proportional to field strength decreases the distance of everything for the field
strength. This causes the spin of the earth or other mass to move quicker farther
away from the greatest other field influence and thus orbit the sun or larger mass. The
closest parts of the bodies have smaller distances because of larger total fields and
thus slower speeds of light. These fields are generated by closed field lines of
vortices and largely matter. Matter does not move as energy because the speed of
light is 0 in the field of the vortex due to infinite field strength within the closed field.
The more mass in proximity something has the greater the field strength and the
shorter the distances, which causes larger groups of subatomic particles to individ-
ually have smaller sizes.
The total field energy in the universe is exactly 0, but particle and energy forms of
vortices divide the energy inside and outside the vortex boundary. When particles
are destroyed no energy is released. No energy was produced when large amount of
matter was destroyed at MIT with accelerated natrium atoms. This is what Tesla
51
archived by triple7inc
References
1. http://www.k-meyl.de/xt_shop/index.php?cat¼c3_Books-in-English.html
2. B. Zohuri, Directed energy weapons: physics of high energy lasers (HEL), 1st edn. (Springer
Publishing Company, New York, 2016)
52
archived by triple7inc
References 375
3. L.M. Hively, G.C. Giakos, Toward a more complete electrodynamic theory. Int. J. Signals
Imaging Syst. Engr. 5, 2–10 (2012)
4. B. Zohuri, Plasma physics and controlled thermonuclear reactions driven fusion energy
(Springer Publishing Company, New York, 2016)
5. D.A. Woodside, Three vector and scalar field identities and uniqueness theorems in Euclidian
and Minkowski space. Am. J. Phys. 77, 438 (2009)
6. M.W. Evans, J.-P. Vigier, The enigmatic photon, Volume 1: The field B(3) (Kluwer Academic,
Dordrecht,. Springer; Softcover Reprint of the Originated, 1994)
7. M.W. Evans, Physics B 182, 237 (1992); 183, 103 (1993)
8. M.W. Evans, in Waves and particles in light and matter, ed. by A. Garuccio, A. Van der Merwe,
(Plenum, New York, 1994)
9. M.W. Evans, The photon’s magnetic field (World Scientific, Singapore, 1992)
10. A.A. Hasanein, M.W. Evans, Quantum chemistry and the photomagnetic (World Scientific,
Singapore, 1992)
11. M.W. Evans, Mod. Phys. Lett. 7, 1247 (1993); Found. Phys. Lett. 7, 67 (1994)
12. M.W. Evans, S. Kielich eds., Modern nonlinear optics, Vols. 85(1), 85(2), 85(3) of Advances in
Chemical Physics, I. Prigogine and S. A. Rice, eds. (Wiley Interscience, New York, 1993/
1994). Volume 85(2) contains a discussion of the cyclic algebra
13. A. Einstein, Zur Elektrodynamik bewegter Körper. Annalen der Physik 17(1). 891–921;
910–911)
14. M.W. Evans, J.-P. Vigier, The enigmatic photon, Volume 2: Non-Abelian electrodynamics
(Kluwer Academic, Dordrecht, 1995)
15. M.W. Evans, J.-P. Vigier, The enigmatic photon, Volume 3: B(3) theory and practice (Kluwer
Academic, Dordrecht, 1995)
16. J.P. van der Ziel, P.S. Pershan, L.D. Malmstrom, Optically-induced magnetization resulting
from the inverse Faraday effect. Phys. Rev. Lett. 15(5), 190–193 (1965)
17. W. Happer, Optical pumping. Rev. Mod. Phys. 44, 169 (1972)
18. Horst Eckardt, What are “scalar waves”? A.I.A.S. and UPITEC, www.aias.us, www.
atomicprecision.com, www.upitec.org
19. M.W. Evans et al., Generally covariant unified field theory (Abramis, Suffolk, 2005 onwards),
vol. 1–7 (www.aias.us, section UFT papers)
20. H. Eckardt, D.W. Lindstrom, Reduction of the ECE theory of electromagnetism to the Maxwell-
Heaviside theory, part I–III, www.aias.us, section publications
21. M.W. Evans, The enigmatic photon (Kluwer Academic, Dordrecht, 1994 onwards), vol. 1–5
(www.aias.us, section omnia opera)
22. H. Eckardt, D.W. Lindstrom, Solution of the ECE vacuum equations, in Generally covariant
unified field theory, vol. 7, (Abramis, Suffolk, 2011), pp. 207–227. (see also www.aias.us,
section publications)
23. Nikola Tesla, Coil for electro-magnets, U.S. Patent 512,340 (1894)
24. http://ericpdollard.com/free-papers/
25. Ing Konstantin Meyl, Scalar waves, theory and experiments, http://www.k-meyl.de/go/
Primaerliteratur/Scalar-Waves.pdf
26. Nikola Tesla, Apparatus for transmission of electrical energy, U.S. Patent 645,576 (1900),
http://en.wikipedia.org/wiki/Wardenclyffe_Tower#Theory_of_wireless_transmission
27. Nikola Tesla, Art of transmitting electrical energy through the natural medium, U.S. Patent
787,412, N.Y. 18.4.1905
28. http://www.cheniere.org/books/part1/teslaweapons.htm
29. http://www.cheniere.org/images/people/moray%20pics.htm
30. http://www.prahlad.org/pub/bearden/Columbia_attack.htm
31. http://www.cheniere.org/books/excalibur/moray.htm
32. T.W. Barrett, H. Wohltjen, A. Snow, Electrical conductivity in phthalocyanines modulated by
circularly polarized light. Nature 301, 694 (1983)
53
View publication stats