Aefr 2019 92 267 2842
Aefr 2019 92 267 2842
Aefr 2019 92 267 2842
net/publication/331631586
Estimation and Analysis of the Output Gap for the Saudi Economy;
Econometric Study (1970-2016)
CITATIONS READS
4 305
2 authors:
Some of the authors of this publication are also working on these related projects:
Estimation and Analysis of the Output Gap for the Saudi Economy; Econometric Study (1970-2016) View project
All content following this page was uploaded by Mohamed Abd Elnaby mohamed Sallam on 12 April 2019.
ABSTRACT
Article History This study highlights the important role plays by the output gap as guidance to the
Received: 16 November 2018 policymakers and macroeconomic decisions. There are two aims for this paper: firstly, it
Revised: 20 December 2018
Accepted: 28 January 2019 measures and estimates the output gap and secondly, it identifies and analyses the
Published: 8 March 2019 determinants of the economic output gap for the Saudi Arabian economy over the
period 1970-2017. This paper uses the HP filter and the new form of production
Keywords function methods to measure the output gap as the production function method gives
Output gap
GDP more accurate results in calculating the output gap by basing the GDP gap on the sum
TFP of production factors gaps. The Autoregressive Distributed Lag (ARDL) cointegration
Cobb-Douglas production
function approach and bounds test was applied to determine the factors responsible for this
The autoregressive distributed output gap and the Error Correction Model indicated the convergence towards long-
Lag (ARDL) co-integration
Technique.
run equilibrium. The findings showed the existence of a positive and negative
cointegration relationship in the long run between the output gap and its estimated
JEL Classification: determinants whereby the public sector investment, import expenditure, and higher
C33, C5, Q4, O40, F43. secondary enrollment have a positive relationship, while the money supply and export
earnings have a negative relationship.
Contribution/ Originality: This study is one of few studies that measures and estimates the output gap in the
Saudi Arabian economy which is currently undergoing structural transformations to diversify income sources
within the Vision 2030 framework. This study has investigated a long-run equilibrium relationship between the
output-gap and its estimated determinants.
1. INTRODUCTION
The concepts of potential output and the output gap are useful to the policy makers in providing guidance to
macroeconomics decisions for all countries over the world. The output gap is a summary measure of the difference
between the economy‘s output level that would be expected if the economy were at its most efficient – that is, at
full capacity (potential GDP) and the actual level of output (real GDP).
The government, public institutions, central banks, and international organizations are all interested in the
estimation of the output gap. This is due to several reasons. The first reason is the financial crisis, which started in
267
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
2008 in the US and spread to EU and many another countries, causing a great recession, with interest rates nearing
zero. Secondly, at the moment many countries are undergoing fiscal consolidation and output gap measures are
needed for cyclical estimates for indicators of fiscal policy, Summers (2014). The third reason is that output gap
estimates are used in the calculation of structural fiscal balance indicators which are subsequently used for
measuring economic growth and stability. Fourthly, the estimation of output gap has an important role in
understanding inflationary dynamics and enhancing its measurement, Alvarez and Gómez-Loscos (2018). The fifth
reason is that, studying the developments in the output gap can predict two effects: (a) a positive output gap which
will create macroeconomic pressures in the form of excess demand in goods and labor markets, eventually
generating upward pressure on the inflation rate or (b) a negative output gap which is usually accompanied by
falling prices, Alkhareif and Alsadoun (2015).
Saudi Arabia is known as the largest oil producer globally and still continues to rely on oil as the primary
source of income. Therefore, it suffers from instability due to world oil price shocks. This requires finding a way to
identify and measure these fluctuations. The output gap is the best way to do this.
This paper has two aims: firstly, it measures and estimates the output gap for the Saudi Arabian economy, and
secondly, it identifies and analyzes the determinants of the economic output gap.
The paper is organized as follows: an introduction in section one, a summary of the theoretical and empirical
literature on the subject in section two, the calculation of the output gap in section three, the methodological
framework and data and variables in section four along with the results and approach and a conclusion in section
five.
The main advantages and disadvantages of each group of methodologies are discussed below. Special attention
is given to the production function, which is based on the economic theory approach and adopted by many
institutions like the European Commission for the surveillance of the EU member states, Central Bank of Japan and
other Central Banks in the rest of world.
Many applied studies have been concerned with estimating and analyzing the output gap as an important tool
of economic policy. The following are some of these studies:
268
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
By examining and testing methods based on univariate and multivariate statistical filters and principal
components analysis and identifying plausible estimates of Ireland‘s output gap that are relevant for fiscal policy,
Casey (2018) finds that the results produce more plausible estimates than the commonly agreed methodology‘s
estimates. The findings of this paper state that the estimates has a similar explanatory power when incorporating
price expectations and inflation-targeting or when considering wage inflation instead of price inflation.
Kawamoto et al. (2017) explained the new methodology for calculating Japan's output gap and the potential
growth rate. This study has revised the method of estimation by accounting for: (1) the time series of Japan's GDP
statistics; (2) the newly available capital stock data according to 2008 SNA guidelines; and (3) structural changes
taking place in labor and capital markets that should be reflected in these estimated trends.
This study has changed estimation methodology in three ways. Firstly, it revised the estimation method of the
"labor force participation rate gap". Secondly, it adjusted the method for calculating the manufacturing "utilization
gap" in order to reflect the economic depreciation of equipment and structures more appropriately. Finally it
identified the persistent decline in working hours over recent years as more of a structural development possibly
due to changes in people's working styles which revised the estimation method of the "hours worked gap,". It also
showed that the result of the potential growth rate shows a significant upward revision for the last few years,
mainly reflecting a rise in the TFP growth rate associated with the revision of the GDP statistics.
Shahrier and Lian (2014) estimated Malaysia‘s Output Gap and presented three methods to estimate the output
gap for the Malaysian economy: univariate, multivariate and structural. They attempted to also contribute more by
providing an evaluation of each model in estimating potential output and the output gap, and the usefulness of each
model in terms of assessing the drivers of future potential output, predicting price trends and identifying sources of
inflation in the economy. The study‘s findings show, that by predicting long-term drivers of growth, the CDPF
framework which is supported by theory, appears to be a more useful model. The SVAR method can be utilized to
identify the source of inflation so that appropriate policies can be implemented to control inflation. In the paper,
Shahrier and Lian (2017) find that the diversity in the results produced by the different models offers policymakers
different perspectives on the dynamics of growth and the degree of excess capacity and price pressure in the
economy. The structural model shows that input driven growth is not sustainable going forward. This study
recommended, that Malaysia like other ASEAN economies will need to focus on productivity driven growth.
To estimate the output gap for Pakistan economy, Tahir and Ahmad (2017) had a comprehensive review and
study conducted to estimate the potential output and the output gap, while avoiding the shortcomings found
existing relevant literature. The study‘s findings indicate a decline in the potential output growth of Pakistan from
2009 to 2013 which has increased the economy‘s vulnerability by making it more susceptible to demand shocks.
Forecasts for the output gap on quarterly and annual frequencies for 2017 is also presented as portraying an upbeat
aggregate demand going forward.
Alkhareif et al. (2017) aimed to estimate annual potential output growth and the output gap for the Saudi
Arabian economy over the period 1980 to 2015, looking at both total output and non-oil output. It also aimed to
study the progress of diversifying the economy and measure the possible impact of diversification on potential
output. It used three methods for estimating potential output: the Hodrick-Prescott filter, the Kalman filter and the
production function approach. The study‘s findings suggest that the output gap is positive on the average over the
entire period; however, the gap has turned negative and has shrunk in recent years. The findings also proved that
growth in both potential GDP and total factor productivity has accelerated in the 2011-2015 period. On the other
hand, the growth of these factors has declined in many other countries, especially developed economies.
Alichi (2015) estimated the output gap in the United States, by adopting an extension of the methodology
developed by Blagrave et al. (2015) for the U.S. economy. The study‘s findings show that the output gap has greatly
reduced since the Great Recession but still remains negative. Although this study has achieved better results than
its predecessor, there is still considerable uncertainty surrounding the estimates. This study used a methodology
269
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
consisting of filtering techniques, the use of reduced-form economic relationships, and the use of survey data on
growth and inflation expectations. Its findings were more robust than simple SV filtering techniques, as the end-of-
sample problems were largely tackled in the MV filtering model used. Alichi (2015) recommended that: ―Future
work could focus on introducing global and financial imbalances into this MV filtering model, because large and
persistent imbalances indeed imply that a closed-economy model could provide gravely incorrect paths of potential
output‖.
To identify the output gap in the Polish economy, Hulej and Grabek (2015) used the indicator of resource
utilization (RU) based on survey and labor market data. And it gives a similar picture of the historical developments
of the resource strain in the Polish economy to the other gap measures used at the Narodowy Bank Polski. By using
a real-time dataset, this paper found that the output gap constructed in this way is revised to a similar or (in recent
years) lesser extent than a measure based on the structural approach and Hodrick Prescott filter. This paper also
proved that the output gap based on the RU indicator performs comparably to other approaches as a proxy of
inflation pressure.
Berger (2011) aimed to estimate potential output, the natural rate of unemployment, the core inflation rate, and
the corresponding gaps for the Euro area. The study used an empirical model consisting of a Phillips curve linking
inflation to unemployment and to link the output gap to cyclical unemployment in a relationship; it used an Okun-
law model. This model is also based on new developments in the models of unobserved components by allowing: (1)
the correlation between shocks at normal rates and corresponding gaps and (2) structural restraints in the deviation
of potential output and the normal rate of unemployment. The results of the study showed that there is a one-time
large shift in the growth rate of potential output in 1974‗s first quarter. The results presented here are also in line
with the production function approach in estimating natural rates.
Economic literature has several theoretical and applied studies dealing with measuring the output gap because
of its importance as a tool in economic decision-making. We note from the previous studies on the output gap in
many countries that most of the studies were limited to measure the output gap using several methods. Most of
those studies preferred the method of the production function, which was used by most recent studies related to
measuring the output gap. We also note the paucity of studies that dealt with output gap analysis and research on
determinants. Thus, we were interested in running this study to estimate the output gap of Saudi Arabia using
production function and to analyze its determinants based on the ARDL approach of co-integration relationships.
The output gap (OutGapt) is an economic measure of the difference between the actual output ( ) and potential
output ( ). A positive output gap means that growth is above the trend rate and is inflationary. A negative output
gap means that there is an economic downturn with unemployment. As considered by Berger (2011) the output gap
is modelled according to Watson (1986) and Clark (1987); Berger (2011) as follows:
(1)
270
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
Adding in both side of Equation 1 as and applying the logarithm1 we obtain the
Equation 2.
(2)
Where ,
3.1. Output Gap Calculation by Using H-P Filter and Production Function.
Two categories of the methodology are used in economic literature: the non-structural methodologies, based on
statistical procedures and the structural methodologies, based on economic foundations. The main advantages and
disadvantages of each group of methodologies are discussed in the economic literature Benes and N'Diaye (2004);
Shahrier and Lian (2017). Special attention is given first to the HP filter (Hodrick and Prescott, 1997) than the
production function methodologies, which are based on economic theory approach and adopted by many institutions
likes the European Commissions for the surveillance of the EU member states, the Central Bank of Japan, and many
other institutions (Kawamoto et al., 2017); (Shahrier and Lian, 2017).
(3)
Where; is the long-run tendency of the variable . The coefficient λ is an exogenous detrending parameter
that sets the degree of smoothness of the trend (i.e. how responsive potential output ( ) is to movements of actual
output ( )). Because the HP filter is used for annual data, λ takes the value 1002.
These methods of estimation used Saudi Arabian data such as total GDP, oil sector GDP, and non-oil sector
GDP, at constant prices (2010=100) (Million Riyals). The result was summarized in Table 1 (in the appendices) and
presented in the Figure 1 and Figure 2 below.
1Using here, the relationship that ln(1 + x) ≈ x if x is close to zero, to calculate the left-hand side of Equation 1.
2The standard in the literature shows that the λ value for the HP filter can often be selected freely depending on the desirable smoothness of the final trend. The λ
value equal to 1 600, if the HP filter is used for quarterly data, and from 100 to 10 for annual data.
271
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
Notes Fig1a to Fig1c: (i.e. Output Gap = Real GDP - Potential GDP) and (Real and potential GDP, at constant prices of 2011, in millions of SAR. Using HP-filter
approach, with smoothing parameter λ =100.)
272
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
The result obtained by using HP method and showed in Table 1 (in the appendix) and presented in Figure 1 a,
b, c agrees with the main hypothesis of the study: that there are negative and positive output gaps in Saudi Arabia
during the period (1980-2017). These gaps are more clearly present in the oil sector Figure 1 b than the non-oil
sector Figure 1 c. This result can be explained by the volatility in the oil price.
In the last decades, the widening of the gap between potential and actual output especially for the non-oil
sector has been increased due to volatility in oil prices. Lower oil prices cause less government oil revenue and
consequently lower levels of capital investment and infrastructure development. Ultimately, this leads to a
reduction in the rate of growth. For more details and precise calculations about output gap measurement, we use
the second method of estimation mentioned before (production function approach).
3.3: Output gap for the Saudi Arabian economy: a model-based production function approach
The calculation of the output gap in Saudi Arabia is based on the production factors as used by Danielsen et al.
(2017). The two classic production factors used are capital stock and labor. The capital stock is the buildings,
machines and other equipment used in production, while labor is the number of people in employment (Fox and
Zurlinden, 2006).
According to the production function in macroeconomics, GDP is obtained from the interrelations of three
variables: (i) labor input (L); (ii) capital input (𝐾); and (iii) the efficiency with which these factors are used, namely
TFP (𝐴). We assume the following relationship for convenience:
(4)
Taking the logarithm of both sides of the equation provides the following relationship:
(5)
Under the assumption of the Cobb–Douglas production function, it is known that elasticity 𝛼 of labor input to
GDP equals labor share in equilibrium3. Therefore, using Equation 5, it is easy to calculate the change in 𝛼𝑡, TFP
3 The notation is standard: Yt is output, Lt labour, Kt capital, At characterizes Total Factor Productivity, and 𝛼, β are the elasticities of labour and capital,
respectively. Given that, typically, the sum of the values of 𝛼 and β are set equal to unity, Billmeier (2004).
273
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
growth or the growth rate of total factors productivity, from the observed change in 𝑦𝑡, 𝑙𝑡, 𝑘𝑡, which is the growth
rate of 𝑌𝑡, 𝐿𝑡, K𝑡.
As already mentioned, the physical capital stock (Kt) is calculated using the investment data available through
the permanent Inventory Method as follow:
(6)
Where is the annual capital stock depreciation rate. In this study ( = 0.05) similar in many other studies4 .
The initial capital stock (K0) is calculated for the first year, for which gross fixed capital formation data is
available (I0) (Sallam and Neffati, 2016). We used the hypothesis that capital stock at time zero is positively
correlated with investments in the following year and inversely related to the average annual growth rate of GDP
and depreciation rate. It was calculated in the same way as in formula:
(7)
Where g is the average annual growth rate of the aggregate product and δ the depreciation rate.
The Human capital stock term was constructed following Barro and Lee (1994) methodology based on
educational attainment, then used by Senhadji (1999) to estimate Sources of Economic Growth. According to
these researches, Ht is written as follows:
(8)
Where; Ht: human stock, Lt: labor force (persons employed, in thousands of persons), Pt: participation rate, r:
average years of schooling, and s: schooling rate (education index).
According to Table 2, the output estimation indicates that the elasticity of labor factors (L) of productions is 𝛼
= 0.4514.
The same formulation of the production function can be applied to the potential GDP, i.e., the aggregate
average supply capacity obtained by smoothing out the business cycle.
(9)
Taking the logarithm of both sides of the equation provides the following relationship:
274
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
(10)
Here, a change in Equation 5 gives the potential growth rate and then subtracting Equation 10 from 5, we
obtain:
(11)
Combining Equations 2 and 11, we arrive at the output gap time series as follows5:
(12)
(13)
The result of the Equation 13 was given in Table 2 (in the appendix). The different gaps which compound the
total output gap are presented in Figure 3 and Figure 4.
5 Because of the lack of data, the Labor input gap could not be calculated in the following manner: Labor input gap (𝑙𝑡 − 𝑙𝑡∗) can be calculated as the sum of labor force
input gap (𝑝𝑡 − 𝑝𝑡∗), employment rate gap (𝑒𝑡 − 𝑒𝑡∗) and hours worked gap (ℎ𝑡 − ℎ𝑡∗). For more details look Kawamoto, Ozaki, Kato and Maehashi (2017)..
275
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
The result obtained by using Cobb-Douglas method and showed in Table 2 (in the appendix) and presented in
Figures 3, 4, and 5 agrees with the main hypothesis of the study and also emphasizes the results obtained by HP-
filter method.
Figures 3 and 4 shows that the Saudi Arabian economy achieved positive gaps which mean that there was
inflation throughout the study period (1970-2017) except for two years of 1975 and 1978 respectively and two
periods 1982-1989 and 2001-2011 that have negative gaps due to an economic downturn.
To explain these positive and negative gaps we need to test the relationship between the output gap and some
macroeconomic variables that may be influencing those gaps. This is the objective for the next section of this paper.
(14)
Where, is the output gap given by Equation 13 using production function method,
v. = money supply
(15)
To analyze the determinants of output gaps (OGt), many methods have been suggested in the econometric
literature for investigating the long-run equilibrium relationship between variables. To choose the suitable methods
of estimation, we first do a unit root test for all variables to choose the suitable model for estimation based on the
variable's integration degrees.
276
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
According to the stationarity analysis results of variables in Table 3 the ARDL approach is the appropriate
method for output gap estimation.
The autoregressive distributed lag (ARDL) modeling approach, was originally proposed by Pesaran and Shin
(1998). The main advantage of ARDL modeling lies in its flexibility when the variables are of a different order of
integration. The ARDL model used in this study is expressed as:
(16)
Where; the dependent variable (OGt) is explained by exogenous variables through the short and long run
relationship. , represent the long-run parameters, while, , are the short run parameters. T is a time trend and (μ)
277
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
The empirical results in Table 4 refer to a long standing relationship between OG and the other variables of
the model and because the F‐statistic for the Bounds Test is 7.842966, it clearly exceeds even the 1% critical value
for the upper bound I(1). So, we reject the hypothesis of "no long‐run relationship" or agree on the hypothesis that
there is a long‐run relationship.
After selecting the appropriate number of lags using Akaike's Information Criterion (AIC) and it was
confirmed, by the bound test, that they have a cointegration relationship between variables of the study. We moved
on to estimation with the ARDL model.
278
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
According to Table 5 a,b which illustrate the results of ARDL Error Correction Regression, the value of the
coefficient of the error correction model is negative and significant (-0.479658). It confirms the existence of a long-
run equilibrium relationship at a significant level of 5%. This means that 0.4796 short-term errors are corrected
automatically over time to achieve long-term equilibrium, and that the output gap requires approximately two years
and one month (1/ 0.4796= 2.08 years) to be adjusted and corrected so that the gap between real and potential
GDP will reach equilibrium.
The Regression for the underlying ARDL equation fits very well at , meaning that over 89% of
279
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
The diagnostic test results, from the Table 6 show that the models pass the tests for functional form and
normality (Jarque-Bera=0.765910& Prob.= 0.681843). However, the results indicate that no serial correlation (F-
statistic=5.546340 & Prob.= 0.0116) and heteroscedasticity (F-statistic=0.00227 & Prob.=0.9622) exists.
To determine whether the model is stable or not, we used the cumulative sum (CUSUM) and the cumulative
sum of squares (CUSUM) tests. The testing results as shown in (Fig 6) prove the stability of long-run coefficients
over the sample period because the graphs of the cumulative sum of squares (CUSUM) and (CUSUMsq) do not
exceed the critical boundaries of both the figures at 5% level of significance. These results indicate that all the
coefficients of the estimated model are stable during the period of study.
1.4 15
1.2
10
1.0
0.8 5
0.6
0
0.4
0.2 -5
0.0
-10
-0.2
-0.4 -15
96 98 00 02 04 06 08 10 12 14 16 96 98 00 02 04 06 08 10 12 14 16
280
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
5. CONCLUSIONS
The output gap is defined as the difference between real and potential GDP. It is considered a useful tool for
policymakers in providing guidance for macroeconomic decision making in countries across the world. By using
annual time series data of Saudi Arabia economy (1970 -2017) based on the SAMA statistics and the World Bank
database measuring output gap and using both HP filter and production function of Cobb- Douglas, this paper was
able to determine the output gap and relationships between determinants.
The results obtained show there are negative and positive output gaps. This can be explained by the volatility
of the oil price because the gaps occur more in the oil sector than in the non-oil sector. Investigations based on the
ARDL model and bounds test for a long run co-integration relationship were done to identify the determinants of
the output gap. The result of the ECM reveals that public sector investment, export earnings, import expenditure,
higher secondary enrolment, and money supply are determinants of the output gap in Saudi Arabia. The significant
and negative coefficient of lagged error correction term is an indication of the convergence towards long-run
equilibrium. The output gap requires more than two years to be automatically corrected over time in order to
achieve long-term equilibrium.
5.1. Highlights
This paper highlights the important role plays by the output gap as a tool for policymakers and macroeconomic
decision making. It measures and estimates the output gap for the Saudi Arabian economy, and it identifies and
analyses the determinants of the economic output gap. It investigates whether a long-run equilibrium relationship
exists between the output gap and the determinants, using the bound testing approach to cointegration and error
correction models, developed within an autoregressive distributed lag (ARDL) framework.
Funding: The authors would like to express their very great appreciation and acknowledge to financial
support received from the Sheikh Mohammed Al-Fawzan, Research Chair for Saudi Arabian Macroeconomic
Expectations (SMF Chair) at Al-Imam Mohamed ibn Saud Islamic University (IMSIU), Saudi Arabia, for
financially supporting this paper.
Competing Interests: The authors declare that they have no competing interests.
Contributors/Acknowledgement: The authors would like to express our very great appreciation to
Professor Khaled Mishaal (Director of SMF Chair) for his valuable and constructive suggestions during the
planning and development of this research.
REFERENCES
Afzal, M., M.E. Malik, A.R. Butt and K. Fatima, 2013. Openness, inflation and growth relationships in Pakistan: An application
of ARDL bounds testing approach. Pakistan Economic and Social Review, 51(1): 13-53.
Alichi, A., 2015. A new methodology for estimating the output gap in the United States (No. 15-144). International Monetary
Fund.
Alkhareif, R.M. and N.A. Alsadoun, 2015. Estimating the output gap for Saudi Arabia. SAMA Quarterly Workshop, Riyadh.
Alkhareif, R.M., W. Barnett and N. Alsadoun, 2017. Estimating the output gap for Saudi Arabia. International Journal of
Economics and Finance, 9(3): 81-90.Available at: https://doi.org/10.5539/ijef.v9n3p81.
Alvarez, L.J. and A. Gómez-Loscos, 2018. A menu on output gap estimation methods. Journal of Policy Modeling, 40(4): 827-
850.Available at: https://doi.org/10.1016/j.jpolmod.2017.03.008.
Barro, R.J. and J.W. Lee, 1994. Sources of economic growth. In Carnegie-Rochester conference series on public policy. North-
Holland, 40: 1-46.
Benes, J. and P.M.B. N'Diaye, 2004. A multivariate filter for measuring potential output and the NAIRU application to the Czech
Republic (No. 4-45). International Monetary Fund.
Berger, T., 2011. Estimating Europe‘s natural rates. Empirical Economics, 40(2): 521-536.Available at:
https://doi.org/10.1007/s00181-010-0342-2.
Billmeier, M.A., 2004. Ghostbusting: Which output gap measure really matters? (No. 4-146). International Monetary Fund.
281
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
Blagrave, P., M.R. Garcia-Saltos, M.D. Laxton and F. Zhang, 2015. A simple multivariate filter for estimating potential output
(No. 15-79). International Monetary Fund.
Casey, E., 2018. Inside the ―upside down‖: Estimating Ireland‘s output gap. Irish Fiscal Advisory Council, Working Paper No.5.
Clark, P.K., 1987. The cyclical component of US economic activity. The Quarterly Journal of Economics, 102(4): 797-
814.Available at: https://doi.org/10.2307/1884282.
Danielsen, T.K., C.W.N. Jorgensen and R.M. Jensen, 2017. Revisiting potential output in Denmark (No. 111). Danmarks
National bank Working Papers.
Engle, R.F. and C. Granger, 1987. Co-integration and error correction: Representation, estimation, and testing. Econometrica,
55(2): 251-276.Available at: https://doi.org/10.2307/1913236.
Fox, K.J. and M. Zurlinden, 2006. On understanding sources of growth and output gaps for Switzerland. Working Papers 2006-
10, Swiss National Bank.
Hodrick, R. and E. Prescott, 1997. Postwar US business cycles: An empirical investigation. Journal of Money, Credit and
Banking, 29(1): 1-16.Available at: https://doi.org/10.2307/2953682.
Hulej, M. and G. Grabek, 2015. Output gap measure based on survey data (No. 200). Narodowy Bank Polski, Economic Research
Department.
Johansen, S. and K. Juselius, 1990. Maximum likelihood estimation and inference on cointegration—with applications to the
demand for money. Oxford Bulletin of Economics and Statistics, 52(2): 169-210.Available at:
https://doi.org/10.1111/j.1468-0084.1990.mp52002003.x.
Kawamoto, T., T. Ozaki, N. Kato and K. Maehashi, 2017. Methodology for estimating output gap and potential growth rate: An
update. Tokyo: Bank of Japan Research Paper, Bank of Japan.
Pesaran, H.H. and Y. Shin, 1998. Generalized impulse response analysis in linear multivariate models. Economics Letters, 58(1 ):
17-29.Available at: https://doi.org/10.1016/s0165-1765(97)00214-0.
Polycarpou, A., 2015. Methodologies for estimating the output gap with an application to Cyprus. Economic Analysis Papers No.
10-15, Economics Research Centre, University of Cyprus.
Sallam, M.A., 2016. Factors promoting economic growth in Egypt: Evidence from ARDL approach. Journal of Business and
Economics, 7(11): 1842-1852.
Sallam, M.A.M. and M.R. Neffati, 2016. Human capital externality and sensitivity of TFP growth. International Journal of
Development Research, 6(7): 8544-8549.
Senhadji, A.S., 1999. Sources of economic growth; an extensive growth accounting exercise (No. 99/77). International Monetary
Fund.
Shahrier, N.A. and C.L. Lian, 2014. Estimating Malaysia‘s output gap: Have we closed the gap? Bank Negara Malaysia Working
Papers No. WP4/2014.
Shahrier, N.A. and C.L. Lian, 2017. Estimating Malaysia‘s output gap: Have we closed the gap? The Singapore Economic
Review: 1-27.Available at: https://doi.org/10.1142/s0217590817500217.
Sherbaz, S., F. Amjad and N.Z. Khan, 2009. Output gap and its determinants: Evidence from Pakistan (1964-05). Journal of
Economic Cooperation and Development, 30(3): 75-98.
Summers, L.H., 2014. Reflections on the ‗new secular stagnation hypothesis. Secular Stagnation: Facts, Causes, and Cures: 27-38.
Tahir, M.A. and W. Ahmad, 2017. Estimation of output gap for Pakistan (No. 85). State Bank of Pakistan, Research Department.
Watson, M.W., 1986. Univariate detrending methods with stochastic trends. Journal of Monetary Economics, 18(1): 49-
75.Available at: https://doi.org/10.1016/0304-3932(86)90054-1.
282
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
APPENDIX
283
© 2019 AESS Publications. All Rights Reserved.
Asian Economic and Financial Review, 2019, 9(2): 267-284
Views and opinions expressed in this article are the views and opinions of the author(s), Asian Economic and Financial Review shall not be responsible or
answerable for any loss, damage or liability etc. caused in relation to/arising out of the use of the content.
284
© 2019 AESS Publications. All Rights Reserved.