Professional Documents
Culture Documents
Chemical Equilibrium
Chemical Equilibrium
CHEMICAL EQUILIBRIUM
THE KEY
CHEMICAL EQUILIBRIUM
Most of the chemical reaction do not go to completion in a closed system and attain a state of equilibrium.
Equilibrium is said to have reached in a physical or chemical system when rate of forward and reverse
processes are equal. At equilibrium macroscopic properties of the system like concentration. Pressure
ect. become constant at constant temperature.
State of chemical equilibrium is characterised by equilibrium constant. Equilibrium constant have constant
value at a given temperature.
UNDERSTANDING EQUILIBRIUM
There are two approaches to understand nature of equilibrium. One stems from kinetics as developed
by Gulberg and Wagge (1863). The other approach comes from thermodynaics. Equilibrium criteria is
explained on the basis of thermodynamic function like H (change in enthalpy), S (change in entropy)
and G (change in Gibb's function).
According to kinetic approaches -The state of equilibrium is characterised by equal rate of forward and
backward process.
At equilibrium
Rate of forward reaction = Rate of backward reaction.
Example : Physical equilibria. Solid liquid equilibria
Solid l liquid
Example: H2O (s) l H2O(l) : 273 K ; 1 atm P.
Solid ice and liquid can coexist at 273 K and 1 atm. Solid form is said to be in equilibrium with liquid
form. At equilibrium, if heat exchanged from surrounding is zero, amount of solid ice and liquid water will
remain unchanged. However it must be noted that, the process of conversion of ice into water and
vica-versa-never ceases. At equilibrium
Net rate of conversion of ice into water = Net rate of conversion of water into ice.
Net rate of condensation of H2O (g) = net rate of evaporation of H2O (l)
[Fe(SCN ) 2 ]
(i) adding Fe3 or SCN– will more = Q less then KC and equilibria will shift in forward
[Fe3 ][SCN ]
direction.
(ii) Removing Fe(SCN)2+will have same effect
(iii) Adding Fe(SCN)2+from outside source in equilibrium mixture will have effect of increasing 'Q' hence
reaction shift in backward direction.
EFFECT OF CHANGE IN PRESSURE
Sometimes we can change the position of equilibrium by changing the pressure on a system. However,
changes in pressure have a measurable effect only in system where gases are involved – and then only
when the chemical reaction produces a change in the total number of gas molecules in the system.
As we increase the pressure of a gaseous system at equilibrium, either by decreasing the volume of the
system or by adding more of the equilibrium mixture, we introduce a stress by increasing the number of
molecules per unit of volume. In accordance with Le Chatelier's principle, a chemical reaction that
reduces the total number of molecules per unit of volume will be favored because this relieves the stress.
The reverse reaction would be favoured by a decrease in pressure.
Consider what happens when we increase the pressure on a system in which NO, O2 and NO2 are in
equilibrium.
Example : 2NO(g) + O2 (g) l 2NO2(g)
The formation of additional amounts of NO2 decreases the total number of molecules in the system,
because each time two molecules of NO2 form, a total of three molecules of NO and O2 react. This
reduces the total pressure exerted by the system and reduces, but does not completely relieve, the stress
of the increased pressure. On the other hand, a decrease in the pressure on the system favors
decomposition of NO2 into NO and O2 which tends to restore the pressure.
Because there is no change in the total number of molecules in the system during reaction, a change in
pressure does not favor either formation or decomposition of gaseous nitric oxide.
Changing concentration or pressure upsets an equilibrium because the reaction quotient is shifted away
from the equilibrium value. Changing the temperature of a system at equilibrium has a different effect: A
change in temperature changes the value of the equilibrium constant. However, we can predict the effect
of the temperature change by treating it as a stress on the system and applying Le Chatelier's principle.
When hydrogen reacts with gaseous iodine, energy is released as heat is evolved.
Increasing the temperature of the reaction increases the amount of energy present. Thus, increasing the
temperature has the effect of increasing the amount of one of the products of this reaction. The reaction
shifts to the left to relieve the stress, and there is an increase in the concentration of H2 and I2 and a
reduction in the concentration of HI. When we change the temperature of a system at equilibrium, the
equilibrium constant for the reaction changes. Lowering the temperature in the HI system increases the
equilibrium constant from 50.0 at 400°C to 67.5 at 357°C. At equilibrium at the lower temperature, the
concentration of HI has increased and the concentrations of H2 and I2 have decreased. Raising the
temperature decreases the value of the equilibrium constant from 67.5 at 357°C to 50.0 at 400°C.
d(nK) H d(nK ) H K2
1
= H
1
(a) = (b) = .Integrated form ln
dT RT 2 d T1 R K1 R T2 T1
A THERMODYNAMIC RELATIONSHIP :
Gº = RTlnK .
EFFECT OF CATALYST ON EQUILIBRIUM
A catalyst has no effect on the value of an equilibrium constant or on equilibrium concentrations. The
catalyst merely increase the rates of both the forward and the reverse reactions to the same extent so that
equilibrium is reached more rapidly.
All of these effects change in concentration or pressure, change in temperature, and the effect of a
catalyst on a chemical equilibrium play a role in the industrial synthesis of ammonia from nitrogen and
hydrogen according to the equation.
N2 + 3H2 l 2NH3
One way to increase the yield of ammonia is to increase the pressure on the system in which N2, H2 and
NH3 are in equilibrium or are coming to equilibrium.
N2 (g) 3H2(g) l 2NH3(g)
The formation of additional amounts of ammonia reduces the total pressure exerted by the system and
somewhat reduces the stress of the increased pressure.
Although increasing the pressure of a mixture of N2 , H2 and NH3 increase the yield ammonia, at low
temperatures the rate of formation of ammonia is slow. At room temperature, for example, the reaction
is so slow that if we prepared a mixture of N2 and H2, no detectable amount of ammonia would form
during our lifetime. Attempts to increase the rate of the reaction by increasing the temperature are
counterproductive. The formation of ammonia from hydrogen and nitrogen is an exothermic process:
N2(g) + 3H2(g) 2NH3(g) H = – 92.2 kJ
Thus increasing the temperature to increase the rate lowers the yield. If we lower the temperature to shift
the equilibrium to the right to favor the formation of more ammonia, equilibrium is reached more slowly
because of the large decrease of reaction rate with decreasing temperature.
Part of the rate of formation lost by operating at lower temperatures can be recovered by using a catalyst
to increase the reaction rate. Iron powder is one catalyst used. However, as we have seen, a catalyst
serves equally well to increase the rate of a reverse reaction in this case, the decomposition of ammonia
into its constituent elements. Thus the net effect of the iron catalyst on the reaction is to cause equilibrium
to be reached more rapidly.
In the commercial production of ammonia, conditions of about 500°C and 150–900 atmosphere are
selected to give the best compromise among rate, yield and the cost of the equipment necessary to
produce and contain gases at high pressure and high temperatures.
Before we consider the applications of equilibrium constants, let us consider its important features:
(i) the expression for equilibrium constant, K is applicable only when concentrations of the reactants and
products have attained their equilibrium values and do not change with time.
(ii) The value of equilibrium constant is independent of initial concentration of the reactants and product.
Equilibrium constant has one unique value for a particular reaction represented by a balanced equation at
a given temperature.
(iii) The equilibrium constant for the reverse reaction is equal constant for the forward reaction.
(iv) The equilibrium constant, K for a reaction is related to the equilibrium constant of the corresponding
reaction whose equation is obtained by multiplying or dividing the equation for the original reaction by a
small integer.
Now we will consider some applications of equilibrium constant and use it to answer question like:
(i) predicting the extent of a reaction on the basis of its magnitude.
(ii) predicting the direction of the reaction, and
(iii) calculating equilibrium concentration.
Predicting the extent of a reaction
The magnitude of equilibrium constant is very useful especially in reactions of industrial importance. An
equilibrium constant tells us whether we can expect a reaction mixture to contain a high or low concentration
of product(s) at equilibrium. (It is important to note that an equilibrium constant tells us nothing about the
rate at which equilibrium is reached). In the expression of KC or KP, product of the concentrations of
products is written in numerator and the product of the concentrations of reactants is written in denominator.
High value of equilibrium constant indicates that product(s) concentration is high and its low value
indicates that concentration of the product(s) in equilibrium mixture is low.
For reaction, H2 (g) + Br2(g) l 2HBr(g), the value of
( PHBr ) 2
KP = 18
( PH )( PBr ) = 5.4 × 10
2 2
The large value of equilibrium constant indicates that concentration of the product, HBr is very high and
reaction goes nearly to completion.
Similarly, equilibrium constant for the reaction H2(g) + Cl2(g) l 2HCl(g) aty 300 K is very high and
reaction goes virtually to completion.
[ HCl ]2
KC = = 4.0 × 1031
[ H 2 ][Cl 2 ]
Thus, large value of KP or KC (larger than about 103), favour the products strongly. For intermedicate
values of K (approximately in the range of 10–3 to 103), the concentrations of reactants and products
are comparable. Small values of equilibrium constant (smaller than 10–3), favour the reactants strongly.
At 298 K for reaction, N2(g) + O2(g) l 2NO(g)
[ NO ]2
KC = = 4.8 × 10–31
[ N 2 ][ O 2 ]
The very small value of KC implies that reactants N2 and O2 will be the predominant species in the
reaction mixture at equilibrium.
Q.2 Among the solubility rules is the statement that all chlorides are soluble except Hg2Cl2, AgCl, PbCl2, and
CuCl.
(a) Write the expression for the equilibrium constant for the reaction represented by the equation.
AgCl (s) l Ag+(aq) + Cl– (aq)
Is K greater than 1, less than 1, or about equal to 1? Explain your answer
(b) Write the expression for the equilibrium constant for the reaction represented by the equation
Pb2+ (aq) + 2Cl– (aq) l PbCl2 (s)
Is K greater than 1, less than 1, or about equal to 1? Explain your answer.
Q.3 Among the solubility rules is the statement that carbonates, phosphates, borates, arsenates, and arsenites,
except those of the ammonium ion and the alkali metals are insoluble.
(a) Write the expression for the equilibrium constant for the reaction represented by the equation
CaCO3 (s) l Ca2+ (aq) + CO32– (aq)
Is K greater than 1, less than 1, or about equal to 1? Explain your answer
(b) Write the expression for the equilibrium constant for the reaction represented by the equation.
3Ba2+ (aq) + 2PO43– (aq) l Ba3(PO4)2 (s)
Is K greater than 1, less than 1, or about equal to 1? Explain your answer.
Q.4 Benzene is one of the compounds used as octane enhancers in unleaded gasoline. It is manufactured by
the catalytic conversion of acetylene to benzene.
3C2H2 C6H6
Would this reaction be most useful commercially if K were about 0.01, about 1, or about 10? Explain
your answer.
Q.5 Show the complete chemical equation and the net ionic equation for the reaction represented by the
equation
KI (aq) + I2 (aq) l KI3 (aq)
give the same expression for the reaction quotient. KI3 is composed of the ions K+ and I3–.
Using the equilibrium constant
Q.6 Which of the following reactions goes almost all the way to completion, and which proceeds hardly at
all?
(a) N2(g) + O2(g) l 2NO (g); Kc = 2.7 × 10–18
(b) 2NO(g) + O2(g) l 2NO2 (g); Kc = 6.0 × 1013
Q.7 For which of the following reactions will the equilibrium mixture contain an appreciable concentration of
both reactants and products?
(a) Cl2(g) l 2Cl (g) ; Kc = 6.4 × 10–39
(b) Cl2(g) + 2NO (g) l 2NOCl (g) ; Kc = 3.7 × 108
(c) Cl2(g) + 2NO2 (g) l 2NO2Cl (g) ; Kc = 1.8
Q.8 The value of Kc for the reaction 3O2 (g) l 2O3 (g) is 1.7 × 10–56 at 25°C. Do you expect pure air at
25°C to contain much O3 (ozone) when O2 and O3 are in equilibrium? If the equilibrium concentration
of O2 in air at 25°C is 8 × 10–3 M, what is the equilibrium concentration of O3?
Q.9 At 1400 K, Kc = 2.5 × 10–3 for the reaction CH4 (g) + 2H2S l CS2(g) + 4H2(g). A 10.0 L reaction
vessel at 1400 K contains 2.0 mol of CH4, 3.0 mol of CS2, 3.0 mol of H2 and 4.0 mol of H2S. Is the
reaction mixture at equilibrium? If not, in which direction does the reaction proceed to reach equilibrium?
Q.10 The first step in the industrial synthesis of hydrogen is the reaction of steam and methane to give water
gas, a mixture of carbon monoxide and hydrogen.
H2O (g) + CH4(g) l CO (g) + 3H2(g) Kc = 4.7 at 1400 K
A mixture of reactants and product at 1400 K contains 0.035 M H2O, 0.050M CH4, 0.15 M CO, and
0.20 M H2. In which direction does the reaction proceed to reach equilibrium?
Q.11 An equilibrium mixture of N2, H2, and NH3 at 700 K contains 0.036 M N2 and 0.15 M H2. At this
temperature, Kc for the reaction N2(g) + 3H2(g) l 2NH3(g) is 0.29. What is the concentration of NH3?
Q.12 The air pollutant NO is produced in automobile engines from the high temperature reaction
N2(g) + O2(g) l 2NO (g) ; Kc = 1.7 × 10–3 at 2300 K. If the initial concentrations of N2 and O2 at
2300 K are both 1.40 M, what are the concentrations of NO, N2, and O2 when the reaction mixture
reaches equilibrium?
Q.13 At a certain temperature, the reaction PCl5(g) l PCl3(g) + Cl2(g) has an equilibrium constant
Kc = 5.8 ×10–2. Calculate the equilibrium concentrations of PCl5, PCl3 and Cl2 if only PCl5 is present
initially, at a concentration of 0.160 M.
Q.14 At 700 K, Kp = 0.140 for the reaction ClF3 (g) l ClF (g) + F2(g). Calculate the equilibrium partial
pressure of ClF3, ClF, and F2 if only ClF3 is present initially, at a partial pressure of 1.47 atm.
Q.15 The degree of dissociation of N2O4 into NO2 at 1.5 atmosphere and 40°C is 0.25. Calculate its
Kp at 40°C.Also report degree of dissociation at 10 atmospheric pressure at same temperature.
Q.16 At 46°C, Kp for the reaction N2O4(g) l 2NO2(g) is 0.667 atm . Compute the percent dissociation
of N2O4 at 46° C at a total pressure of 380 Torr .
Q.17 When 36.8g N2O4 (g) is introduced into a 1.0-litre flask at 27°C . The following equilibrium
reaction occurs : N2O4 (g) l 2NO2 (g) ; Kp = 0.1642 atm.
(a) Calculate Kc of the equilibrium reaction.
(b) What are the number of moles of N2O4 and NO2 at equilibrium?
(c) What is the total gas pressure in the flask at equilibrium?
(d) What is the percent dissociation of N2O4?
Q.18 At some temperature and under a pressure of 4 atm , PCl5 is 10% dissociated . Calculate the
pressure at which PCl5 will be 20% dissociated , temperature remaining same.
Q.19 In a mixture of N2 and H2 in the ratio of 1:3 at 64 atmospheric pressure and 300°C, the percentage of
ammonia under equlibrium is 33.33 by volume. Calculate the equilibrium constant of the reaction using
the equation . N2(g) + 3H2(g) l 2NH3(g).
Q.20 The system N2O4 l 2 NO2 maintained in a closed vessel at 60º C & a pressure of 5 atm has an average
(i.e. observed) molecular weight of 69, calculate Kp. At what pressure at the same
temperature would the observed molecular weight be (230/3) ?
Q.21 The vapour density of N2O4 at a certain temperature is 30. Calculate the percentage dissociation of
N2O4 at this temperature. N2O4(g) l 2NO2 (g).
Q.22 In the esterfication C2H5OH (l) + CH3COOH (l) l CH3COOC2H5 (l) + H2O (l) an equimolar
mixture of alcohol and acid taken initially yields under equilibrium, the water with mole
fraction = 0.333. Calculate the equilibrium constant.
Hetrogeneous equilibrium
Q.23 Solid Ammonium carbamate dissociates as: NH2 COONH4 (s) l 2NH3(g) + CO2(g). In a closed
vessel solid ammonium carbamate is in equilibrium with its dissociation products. At equilibrium, ammonia
is added such that the partial pressure of NH3 at new equilibrium now equals the original total pressure.
Calculate the ratio of total pressure at new equilibrium to that of original total pressure.
Q.24 A sample of CaCO3(s) is introduced into a sealed container of volume 0.821 litre & heated to 1000K
until equilibrium is reached. The equilibrium constant for the reaction CaCO3(s) l CaO(s) + CO2(g) is
4 × 102 atm at this temperature. Calculate the mass of CaO present at equilibrium.
Q.25 Anhydrous calcium chloride is often used as a dessicant. In the presence of excess of CaCl2,, the
amount of the water taken up is governed by Kp = 6.4 × 1085 for the following reaction at room
temperature, CaCl2(s) + 6H2O(g) l CaCl2 .6H2O(s) . What is the equilibrium vapour pressure of
water in a closed vessel that contains CaCl2(s) ?
Q.26 20.0 grams of CaCO3(s) were placed in a closed vessel, heated & maintained at 727º C under
equilibrium CaCO3(s) l CaO(s) + CO2(g) and it is found that 75 % of CaCO3 was decomposed.
What is the value of Kp ? The volume of the container was 15 litres.
Q.30(a) Water gas, a mixture of H2 and CO, is an important industrial fuel produced by the reaction of steam
with red-hot coke, essentially pure carbon. Write the expression for the equilibrium constant for the
reversible reaction.
C(s) + H2O (g) l CO (g) + H2 (g) H = 131.30 kJ
(b) Assume that equilibrium has been established and predict how the concentration of each reactant and
product will differ at a new equilibrium if (1) more C is added. (2) H2O is removed. (3) CO is added.
(4) the pressure on the system is increased. (5) the temperature of the system is increased.
Q.31 Ammonia is a weak base that reacts with water according to the equation
NH3 (aq) + H2O (l) l NH4+ + OH– (aq)
Will any of the following increase the percent of ammonia that is converted to the ammonium ion in
water? (a) Addition of NaOH. (b) Addition of HCl. (c) Addition of NH4Cl.
Q.32 Suggest two ways in which the equilibrium concentration of Ag+ can be reduced in a solution of Na+,
Cl–, Ag+ and NO3–, in contact with solid AgCl.
Na+ (aq) + Cl– (aq) + Ag+ (aq) + NO3– (aq) l AgCl (s) + Na+ (aq) + NO3– (aq) H = –65.9 kJ
Q.33 Additional solid silver sulfate, a slightly soluble solid, is added to a solution of silver ion and sulfate ion in
equilibrium with solid silver sulfate. Which of the following will occur? (a) The Ag+ and SO42– concentration
will not change. (b) The added silver sulfate will dissolve. (c) Additional silver sulfate will form and
precipitate from solution as Ag+ ions and SO42– ions combine. (d) The Ag+ ion concentration will increase
and the SO42– ion concentration will decrease.
Kinetics and equilibrium constant
Q.34 Consider a general, single-step reaction of the type A + B l C. Show that the equilibrium constant is
equal to the ratio of the rate constant for the forward and reverse reaction, Kc = kf/kr.
Q.35 Which of the following relative values of kf and kr results in an equilibrium mixture that contains large
amounts of reactants and small amounts of product?
(a) kf > kr (b) kf = kr (c) kf < kr
Q.40 Forward and reverse rate constant for the reaction CO2(g) + N2(g) l CO(g) + N2O (g) exhibit the
following temperature dependence.
Temperature (K) kf (M–1s–1) kr (M–1s–1)
1200 9.1 × 10–11 1.5 × 105
1500 2.7 × 10 –9 2.6 × 105
Is the reaction endothermic or exothermic? Explain in terms of kinetics.
Q.41 The equilibrium constant Kp for the reaction PCl5(g) l PCl3(g) + Cl2(g) is 3.81 × 102 at 600 K and
2.69 × 103 at 700 K. Calculate rH.
Q.43 Variation of equilibrium constant 'K' with temperature 'T' is given by equation
H
log K = log A – 2.303 RT
A graph between log K and 1/T was a straight line with slope of 0.5 and intercept 10. Calculate
(a) H°
(b) Pre exponential factor
(c) Equilibrium constant at 298 K
(d) Equilibrium constant at 798 K assuming H° to be independent of temperature.
Q.45 The KP for reaction A + B l C + D is1.34 at 60°C and 6.64 at 100°C. Determine the free energy
change of this reaction at each temperature and H° for the reaction over this range of temperature?
Q.46 If Kc = 7.5 × 10–9 at 1000 K for the reaction N2 (g) + O2 (g) l 2NO (g), what is Kc at 1000 K for the
reaction 2NO (g) l N2 (g) + O2 (g)?
Q.47 An equilibrium mixture of PCl5, PCl3 and Cl2 at a certain temperature contains 8.3 × 10–3 M PCl5,
1.5 × 10–2 M PCl3, and 3.2 × 10–2 M Cl2. Calculate the equilibrium constant Kc for the reaction
PCl5 (g) l PCl3 (g) + Cl2 (g).
Q.48 A sample of HI (9.30 × 10–3 mol) was placed in an empty 2.00 L container at 1000 K. After equilibrium
was reached, the concentration of I2 was 6.29 × 10–4 M. Calculate the value of Kc at 1000 K for the
reaction H2 (g) + I2 (g) l 2HI (g).
Q.49 The vapour pressure of water at 25°C is 0.0313 atm. Calculate the values of Kp and Kc at 25°C for the
equilibrium H2O (l) l H2O (g).
Q.50 For each of the following equilibria, write the equilibrium constant expression for Kc. Where appropriate,
also write the equilibrium constant expression for Kp.
(a) Fe2O3 (s) + 3CO (g) l 2Fe (l) + 3CO2 (g) (b) 4Fe (s) + 3O2 (g) l 2Fe2O3 (s)
(c) BaSO4 (s) l BaO (s) + SO3 (g) (d) BaSO4 (s) l Ba2+ (aq) + SO42– (aq)
General problems
Q.51 When 0.5 mol of N2O4 is placed in a 4.00 L reaction vessel and heated at 400 K, 79.3% of the N2O4
decomposes to NO2.
Calculate Kc and Kp at 400 K for the reaction N2O4 (g) l 2NO2(g)
Q.52 What concentration of NH3 is in equilibrium with 1.0 × 10–3 M N2 and 2.0 × 10–3 M H2 at 700K? At
this temperature Kc = 0.291 for the reaction N2(g) + 3H2 (g) l 2NH3 (g).
Q.53 At 100 K, the value of Kc for the reaction C (s) + H2O (g) l CO (g) + H2 (g) is 3.0 × 10–2. Calculate the
equilibrium concentrations of H2O, CO2, and H2 in the reaction mixture obtained by heating 6.0 mol of steam
and an excess of solid carbon in a 5.0 L container. What is the molar composition of the equilibriummixture?
Q.54 When 1.0 mol of PCl5 is introduced into a 5.0 L container at 500 K, 78.5 % of the PCl5 dissociates to
give an equilibrium mixture of PCl5, PCl3, and Cl2.
PCl5(g) l PCl3(g) + Cl2(g)
(a) Calculate the values of Kc and Kp.
(b) If the initial concentrations in a particular mixture of reactants and products are [PCl5] = 0.5 M,
[PCl3] = 0.15 M, and [Cl2] = 0.6 M, in which direction does the reaction proceed to reach equilibrium?
What are the concentrations when the mixture reaches equilibrium?
Q.55 The equilibrium constant Kc for the gas-phase thermal decomposition of cyclopropane to propene is
1.0 × 105 at 500 K.
Q.56 -D-Glucose undergoes mutarotation to -D-Glucose in aqueous solution. If at 298 K there is 60%
conversion. Calculate G° of the reaction.
-D-Glucose l -D-Glucose
Q.58 The equilibrium constant of the reaction 2C3H6(g) l C2H4(g) + C4H8(g) is found to fit the expression
1088 K
lnK = –1.04 –
T
Calculate the standard reaction enthalpy and entropy at 400 K.
PROFICIENCY TEST
1. K for the reaction 2A + B l 2C is 1.5 × 1012. This indicates that at equilibrium the concentration of
______ would be maximum.
4. Compared to K for the dissociation, 2H2S l 2H+ + 2HS–, then K' for the H+ + HS– l H2S would have
_______.
5. The equilibrium constant for a reaction decreases with increase in temperature, the reaction must be
______.
6. For the reaction, PCl5(g) l PCl3(g) + Cl2(g), KP and KC are related as ______.
7. For the reactions, N2O4(g) l 2NO2(g), at equilibrium, increase in pressure shifts the equilibrium in
_______ direction.
11. Dimensions of equilibrium constant, Kc for the reaction 2NH3 l N2 + 3H2, are _______.
14. The degree of dissociation of PCl5 [PCl5(g) l PCl3(g) + Cl2(g)], _________ with increase in pressure
at equilibrium.
15. If concentration quotient, Q is greater than KC, the net reaction in taking place in _____ direction.
19. Introduction of inert gas at constant volume to a gaseous reaction at equilibrium results in formation of
______ product.
20. The product is more stable than reactants in reaction having ______K.
21. Van't Hoff's equation gives the quantitative relation between change in value of K with change in
temperature.
22. The larger value of K indicates that the product is more stable relative to reactants.
23. The value of equilibrium constant changes with change in the initial concentration of the reactants.
26. Introduction of inert gas at a gaseous reaction (ng 0) at equilibrium keeping pressure constant has no
effect on equilibrium state.
28. For a reaction the value of Q greater than K indicates that the net reaction is proceeding in backward
direction.
33. A catalyst increases the value of the equilibrium constant for a reaction.
34. If concentration quotient of reaction is less than K, the net reaction is proceeding in the backward
direction.
35. In case of endothermic reactions, the equilibrium shifts in backward direction on increasing the temperature.
38. The reaction 2SO2(g) + O2(g) l 2SO3(g), H = –X kJ, is favoured by high pressure and high temperature.
39. A very high value of K indicates that at equilibrium most of the reactants are converted into products.
40. The value of K for the reaction, N2 + 2H2 l 2NH3, can be increased by applying high pressure or by
using a catalyst.
EXERCISE II
Q.1 At high temperatures phosgene, COCl2 decompose to give CO & Cl2. In a typical experiment 9.9 × 104 kg
of COCl2 is injected into a flask of volume 0.4105 dm3 at 1000 K. When equilibrium is established it
is found that the total pressure in the flask is 3.039 × 105 pascals. Calculate the equilibrium constant
(Kp) for this reaction at 1000 K.
Q.2 2 moles of A & 3 moles of B are mixed in 1 litre vessel and the reaction is carried at 400°C according
to the equation; A + B l 2 C. The equilibrium constant of the reaction is 4. Find the number of moles
of C at equilibrium.
Q.3 2 NOBr (g)l 2 NO (g) + Br2 (g). If nitrosyl bromide (NOBr) is 33.33% dissociated at 25° C &
a total pressure of 0.28 atm . Calculate Kp for the dissociation at this temperature.
Q.5 The equilibrium constant for the reaction is 9.40 at 900°C S2(g) + C(s) l CS2(g) . Calculate the
pressure of two gases at equilibrium, when 1.42 atm of S2 and excess of C(s) come to equilibrium.
Q.6 A mixture of 2 moles of CH4 & 34 gms of H2S was placed in an evacuated container, which was then
heated to & maintained at 727º C. When equilibrium was established in the gaseous reaction
CH4 + 2 H2S l CS2 + 4 H2 the total pressure in the container was 0.92 atm & the partial pressure of
hydrogen was 0.2 atm. What was the volume of the container ?
Q.7 At 817° C, Kp for the reaction between pure CO2 and excess hot graphite to form 2 CO(g) is 10 atm.
(a) What is the analysis of the gases at equilibrium at 817°C & a total pressure of 4.0 atm ? What is the
partial pressure of CO2 at equilibrium ?
(b) At what total pressure will the gas mixture analyze 6%, CO2 by volume ?
Q.8 The equilibrium mixture SO2 + NO2 l SO3 + NO was found to contain 0.6 mol of SO3, 0.40 mol of
NO, 0.8 mol of SO2 & 0.1 mol of NO2 in a 1L vessel. One mole of NO was then forced into the
reaction vessel with V & T constant. Calculate the amounts of each gas in the new equilibrium mixture.
Q.9 For the reaction N2O4 l 2NO2, equilibrium mixture contains NO2 at P = 1.1 atm & N2O4 at
P = 0.28 atm at 350 K. The volume of the container is doubled. Calculate the equilibrium pressures of
the two gases when the system reaches new equilibrium.
Q.10 In the preceding problem, calculate the degree of dissociation, at both pressures corresponding to
mean molar masses of 65 & 76.667. Use data from the preceding problem.
Q.11 PCl5 dissociates according to the reaction PCl5 l PCl3(g) + Cl2(g) . At 523 K, Kp = 1.78 atm. Find
the density of the equilibrium mixture at a total pressure of 1 atm .
Q.12 The reaction 3/2H2(g) + 1/2 N2(g) l NH3(g) was carried out at T = 620 K & P = 10 atm with an
initial mixture of H2 : N2 = 3 : 1, the mixture at equilibrium contained 7.35 % NH3. Find Kp and Kc.
Q.13 For the reaction SO2(g) + 1/2 O2(g) l SO3(g) H°298 = 98.32 kJ/mole,
S°298 = 95.0 J/K/mole . Find the Kp for this reaction at 298 K.
Q.14 The following data for the equilibrium composition of the reaction
2Na(g) l Na2(g)
at 1.013 MPa pressure and 1482.53 K have been obtained.
mass % Na (monomer gas) = 71.3
mass % Na2 (dimer gas) = 28.7
Calculate the equilirium constant Kp.
Q.15 The degree of dissociation of HI at a particular temperature is 0.8 . Find the volume of 1.5M sodium
thiosulphate solution required to react completely with the iodine present at equilibrium in acidicconditions,
when 0.135 mol each of H2 and I2 are heated at 440 K in a closed vessel of capacity 2.0 L.
Q.16 A reaction system in equilibrium according to the equation 2 SO2 + O2 l 2 SO3 in 1 litre reaction vessel
at a given temperature was found to contain 0.11 mol of SO2, 0.12 mol of SO3 and 0.05 mol of O2.
Another 1 litre reaction vessel contains 64 g of SO2 at the same temperature. What mass of O2 must be
added to this vessel in order that at equilibrium half of SO2 is oxidised to SO3 ?
Q.17 A mixture of hydrogen & iodine in the mole ratio 1.5 : 1 is maintained at 450º C. After the attainment of
equilibrium H2(g) + I2(g) l 2 HI(g), it is found on analysis that the mole ratio of I2 to HI is 1 : 18.
Calculate the equilibrium constant & the number of moles of each species present under equilibrium, if
initially, 127 grams of iodine were taken.
Q.18 In a closed container nitrogen and hydrogen mixture initially in a mole ratio of 1:4 reached equilibrium. It
is found that the half hydrogen is converted to ammonia. If the original pressure was 180 atm, what will
be the partial pressure of ammonia at equilibrium. (There is no change in temperature)
Q.19 The equilibrium constant for the reaction CO(g) + H2O(g) l CO2(g) + H2(g) is 7.3 at 450º C & 1atm
pressure . The initial concentration of water gas [CO + H2] & steam are 2 moles & 5 moles respectively.
Find the number of moles of CO, H2, CO2 & H2O (vapour) at equilibrium.
Q.20 At 1200°C, the following equilibrium is established between chlorine atoms & molecule:
Cl2(g) l 2Cl (g)
The composition of the equilibrium mixture may be determined by measuring the rate of effusion of the
mixture through a pin hole. It is found that at 1200°C and 1 atm pressure the mixtureeffuses 1.16 times
as fast as krypton effuses under the same condition. Calculate the equilibrium constant Kc.
Q.21 Two solids X and Y disssociate into gaseous products at a certain temperature as follows:
X(s) l A(g) + C(g), and Y(s) l B(g) + C(g). At a given temperature, pressure over excess
solid X is 40 mm and total pressure over solid Y is 60 mm. Calculate:
(a) the values of Kp for two reactions (in mm)
(b) the ratio of moles of A and B in the vapour state over a mixture of X and Y.
(c) the total pressure of gases over a mixture of X and Y.
Q.22 SO3 decomposes at a temperature of 1000 K and at a total pressure of 1.642 atm. At equilibrium, the
density of mixture is found to be 1.28 g/l in a vessel of 90 literes. Find the degree of dissociation of SO3
for SO3 lSO2 + 1/2O2.
Q.23 Consider the equilibrium: P(g) + 2Q(g) lR(g). When the reaction is carried out at a certain temperature,
the equilibrium conceentration of P and Q are 3M and 4M respectively. When the volume of the vessel
is doubled and the equilibrium is allowed to be reestablished, the concentration of Q is found to be 3M.
Find (A) Kc (B) concentration of R at two equilibrium stages.
Q.24 When PCl5 is heated, it dissociates into PCl3 and Cl2. The vapor density of the gaseous mixture at
200°C and 250°C is 70.2 and 57.9 respectively. Find the % dissociation of PCl5 at 200°C and 250°C.
Q.25 The density of an equilibrium mixture of N2O4 and NO2 at 101.32 KPa is 3.62g dm3 at 288 K and
1.84 g dm3 at 348K. What is the heat of the reaction for N2O4 l 2NO2 (g) .
Q.26 Two solid compounds A & C dissociates into gaseous productat temperature as follows
A(s) B(g) + E (g)
C(s) D(g) + E (g)
At 20° C pressure over excess solid A is 50atm & that over excess solid C is 68atm. Find the total
pressure of gases over the solid mixture.
Q.28 A saturated solution of iodine in water contains 0.33g I2 / L. More than this can dissolve in a KI solution
because of the following equilibrium : I2(aq) + I aq)l I3 aq. A 0.10 M KI solution (0.10 M I)
actually dissolves 12.5 g of iodine/L, most of which is converted to I3. Assuming that the concentration
of I2 in all saturated solutions is the same, calculate the equilibrium constant for the above reaction.
What is the effect of adding water to a clear saturated of I2 in the KI solution ?
Q.29 The equilibrium pXyloquinone + methylene white l pXylohydroquinone + methylene blue may be
studied convinently by observing the difference in color methylene white and methylene blue. One mmol
of methylene blue was added to 1L of solution that was 0.24 M in pXylohydroquinone and 0.012 M in
pXyloquinone. It was then found that 4% of the added methylene blue was reduced to methylene
white. What is the equilibrium constant of the above reaction? The equation is balanced with one mole
each of 4 substances.
Q.30 A mixture of N2 & H2 are in equilibrium at 600 K at a total pressure of 80 atm. If the initial ratio of N2
and H2 are 3:1 and at equilibrium NH3 is 10% by volume. Calculate KP of reaction at given temperature.
Q.31 Gº (298 K) for the reaction 1/2 N2 + 3/2 H2 NH3 is 16.5 kJ mol1 . Find the equilibrium
constant (K1) at 25°C .What will be the equilibrium constants K2 and K3 for the following reactions:
N2 + 3H2 2NH3
the gas obeys the approx. equation PV 1 (n 1)K c where K c A n & V is the volume of the
RT V n 1
n
A
conatiner. Assume that initially one mole of A was taken in the container.
Q.33 103 mol of CuSO4.5H2O is introduced in a 1.9 L vessel maintained at a constant temperature of 27°C containing
moist air at relative humidity of 12.5%. What is the final molar composition of solid mixture?
For CuSO4.5H2O(s) l CuSO4(s) + 5H2O(g), Kp(atm) = 10–10. Take vapor pressure of water at 27°C as 28 torrs.
Q.34 When 1 mol of A(g) is introduced in a closed 1L vessel maintained at constant temperature, the following
equilibria are established.
A(g) l B(g) + 2C(g) ; KC = ?
1
13
The pressure at equilibrium is times the initial pressure.
6
[C]eq 4
Calculate K C1 & K C 2 if [A] = .
eq 9
Q.35 When NO & NO2 are mixed, the following equilibria are readily obtained;
2NO2 l N2O4 Kp = 6.8 atm–1
NO + NO2 l N2O3 Kp = ?
In an experiment when NO & NO2 are mixed in the ratio of 1 : 2, the total final pressure was 5.05 atm
& the partial pressure of N2O4 was 1.7 atm. Calculate
(a) the equilibrium partial pressure of NO.
(b) Kp for NO + NO2 l N2O3
Q.36 Solid NH4I on rapid heating in a closed vessel at 357°C develops a constant pressure of
275 mm Hg owing to partial decomposition of NH4I into NH3 and HI but the pressure gradually increases
further (when the excess solid residue remains in the vessel) owing to the dissociation of HI. Calculate
the final pressure developed at equilibrium.
NH4I (s) l NH3(g) + HI(g)
2HI (g) l H2(g) + I2(g), Kc = 0.065 at 357°C
Q.37 Given are the following standard free energies of formation at 298K.
CO(g) CO2(g) H2O(g) H2O(l)
rG° / kJ mol –1 –137.17 –394.36 –228.57 –237.13
(a) Find rG° and the standard equilibrium constant Kp0 at 298 K for the reaction
CO(g) + H2O(g) l CO2(g) + H2(g)
(b) If CO, CO2 and H2 are mixed so that the partial pressure of each is 101.325 kPa and the mixture is
brought into contact with excess of liquid water, what will be the partial pressure of each gas when
equilibrium is attained at 298K. The volume available to the gases is constant.
80 mol of N2(inert) is passed over a dehydrogenation catalyst at 900K, what is the equilibrium percentage
composition of the effluent gas mixture? The total pressure is kept at 0.5 bar. Given : rS° = 135.143 J
K–1 mol–1 at 300K. Calculate rG° at 300K. (Assume rCp = 0)
Q.39(a) The equilibrium H2 (g) + CO2(g) H2O(g) + CO(g) is established in an evacuated vessel at 723
K starting with 0.1 mole of H2 & 0.2 mole of CO2 . If the equilibrium mixture contains 10 mole per
cent of water vapour, calculate Kp , given that the equilibrium pressure is 0.5 atm. Calculate the
partial pressures of the component species & the volume of the container.
(b) If now, into the flask (mentioned in the preceding problem), solid CoO & solid Co are introduced
two new equilibria are established.
CoO(s) + H2 (g) lCo(s) + H2 O(g) ; CoO(s) + CO(g) lCo(s) + CO2 (g)
The new equilibrium mixture contains 30 mole precent of water vapour. Calculate the equilibrium
constants for the new equilibria.
Q.40 Some iodine is dissolved in an aqueous solution of KI of concentration 0.102 mole/1, and the solution is
then shaken with equal volume of CCl4 until equilibrium is reached (at 15°C). The total amount of iodine
(present as I3 (aq) or as I2 (aq) ) at equilibrium is found to be 0.048 mol/1 in the aqueous layer and
0.085 mol/1 in the CCl4 layer. The distribution coefficient of iodine between CCl4 and water is 85.
Calculate the equilibrium constant at 150C for the reaction:
I3 (aq) l I2 (aq) + I (aq)
EXERCISE III
Q.1 Consider following reactions in equilibrium with equilibrium concentration 0.01 M of every species
(I) PCl5 (g) l PCl3(g) + Cl2(g) (II) 2HI(g) l H2(g) + I2 (g)
(III) N2(g) + 3H2(g) l 2NH3(g)
Extent of the reactions taking place is:
(A) I > II > III (B) I < II < III (C) II < III < I (D) III < I < II
Q.2 For the reaction 3 A (g) + B (g) l 2 C (g) at a given temperature , Kc = 9.0 . What must be the
volume of the flask, if a mixture of 2.0 mol each of A , B and C exist in equilibrium?
(A) 6L (B) 9L (C) 36 L (D) None of these
Q.3 Sulfide ion in alkaline solution reacts with solid sulfur to form polysulfide ions having formulas
S22, S32, S42 and so on. The equilibrium constant for the formation of S22 is 12 ( K1) & for the
formation of S32 is 132 (K2 ), both from S and S2.What is the equilibrium constant for the formation
of S32 from S22 and S?
(A) 11 (B) 12 (C) 132 (D) None of these
Q.4 For the following gases equilibrium. N2O4 (g) l 2NO2 (g)
Kp is found to be equal to Kc. This is attained when
(A) 0°C (B) 273 K (C) 1 K (D) 12.19 K
Q.5 1 mole N2 and 3 mol H2 are placed in a closed container at a pressure of 4 atm. The pressure falls to 3
atm at the same temperature when the following equilibrium is attained.
N2(g) + 3H2(g) l 2NH3(g). The equilibrium constant KP for dissociation of NH3 is:
1 0.5 (1.5)3 3 3
(A) × (1.5)3 atm–2 (B) 0.5 ×(1.5)3 atm2 (C) atm2 (D) atm–2
0. 5 3 3 0.5 (1.5)3
Q.6 One mole of N2O4 (g) at 300 K is left in a closed container under one atm . It is heated to 600 K
when 20 % by mass of N2O4 (g) decomposes to NO2 (g) . The resultant pressure is :
(A) 1.2 atm (B) 2.4 atm (C) 2.0 atm (D) 1.0 atm
Q.7 For the reaction : 2Hl (g) l H2(g) + I2(g), the degree of dissociated () of Hl(g) is related to equilibrium
constant KP by the expression
1 2 Kp 1 2K p 2K p 2 Kp
(A) (B) (C) 1 2K p (D) 1 2 K
2 2 p
Q.8 The vapour density of N2O4 at a certain temperature is 30. What is the % dissociation of N2O4 at this
temperature?
(A) 53.3% (B) 106.6% (C) 26.7% (D) None
Q.9 For the reaction PCl5(g) l PCl3(g) + Cl2(g), the forward reaction at constant temperature is favoured by
(A) introducing an inert gas at constant volume
(B) introducing chlorine gas at constant volume
(C) introducing an inert gas at constant pressure
(D) increasing the volume of the container
(E) introducing PCl5 at constant volume.
Q.10 When N2O5 is heated at temp. T, it dissociates as N 2 O5 l N 2 O 3 O 2 , Kc = 2.5. At the same time
N2O3 also decomposes as : N2O3 l N2O + O2. If initially 4.0 moles of N2O5 are taken in 1.0 litre flask
and allowed to attain equilibrium, concentration of O2 was formed to be 2.5 M. Equilibrium concentration
of N2O is
(A) 1.0 (B) 1.5 (C) 2.166 (D) 0.334
Q.11 Densities of diamond and graphite are 3.5 and 2.3 gm/mL.
C (diamond) l C (graphite) rH = –1.9 kJ/mole
favourable conditions for formation of diamond are
(A) high pressure and low temperature (B) low pressure and high temperature
(C) high pressure and high temperature (D) low pressure and low temperature
Q.12 When NaNO3 is heated in a closed vessel, oxygen is liberated and NaNO2 is left behind. At equilibrium
(A) addition of NaNO2 favours reverse reaction
(B) addition of NaNO3 favours forward reaction
(C) increasing temperature favours forward reaction
(D) increasing pressure favours reverse reaction
Q.13 The equilibrium SO2Cl2(g) l SO2(g) + Cl2(g) is attained at 25°C in a closed rigid container and an inert
gas, helium is introduced. Which of the following statements is/are correct.
(A) concentrations of SO2, Cl2 and SO2Cl2 do not change
(B) more chlorine is formed
(C) concentration of SO2 is reduced
(D) more SO2Cl2 is formed
Q.14 For the gas phase reaction, C2H4 + H2 l C2H6 (H = – 32.7 kcal), carried out in a closed vessel, the
equilibrium concentration of C2H4 can be increased by
(A) increasing the temperature (B) decreasing the pressure
(C) removing some H2 (D) adding some C2H6
Q.16 The correct relationship between free energy change in a reaction and the corresponding equilibrium
constant K is
(A) –G° = RT ln K (B) G = RT ln K (C) –G = RT ln K (D) G° = RT ln K
o
Q.17 The value of G f of gaseous mercury is 31 K J/mole. At what total external pressure mercury start
boiling at 25°C. [R = 8.3]
(A) 10–5.44 (B) 10–12.5 (C) 10–6.52 (D) 10–3.12
Q.18 What is rG (KJ/mole) for synthesis of ammonia at 298 K at following sets of partial pressure:
N2(g) + 3H2(g) l 2NH3(g) ; rG° = –33 KJ/mole. [Take R = 8.3 J/K mole, log2 = 0.3; log3 = 0.48]
Gas N2 H2 NH3
Pressure (atm) 1 3 0.02
(A) + 6.5 (B) – 6.5 (C) + 60.5 (D) – 60.5
Q.19 In a 7.0 L evacuated chamber , 0.50 mol H2 and 0.50 mol I2 react at 427°C .
H2(g) + I2(g) l 2HI(g) . At the given temperature, KC=49 for the reaction.
(i) What is the value of Kp ?
(A) 7 (B) 49 (C) 24.5 (D) None
Q.20 Equilibrium constants are given (in atm) for the following reactions at 0° C:
SrCl2 6H2O(s) l SrCl2 2H2O (s) + 4H2O(g) Kp = 5 × 1012
Na2HPO4 12 H2O(s) l Na2HPO4 7 H2O (s) + 5H2 O(g) Kp = 2.43 × 1013
Na2SO4 10 H2O(s) l Na2SO4 (s) + 10 H2O (g) Kp = 1.024 × 1027
The vapor pressure of water at 0°C is 4.56 torr.
(i) Which is the most effective drying agent at 0°C?
(A) SrCl2 2H2O (B) Na2HPO47 H2O (C) Na2SO4 (D) all equally
(ii) At what relative humidities will Na2SO4 10 H2O be efflorescent when exposed to air at 0°C?
(A) above 33.33% (B) below 33.33 % (C) above 66.66% (D) below 66.66%
(iii) At what relative humidities will Na2SO4 be deliquescent (i.e. absorb moisture) when exposed to the air
at 0°C?
(A) above 33.33% (B) below 33.33 % (C) above 66.66% (D) below 66.66%
EXERCISE IV
Q.1 A sample of air consisting of N 2 and O 2 was heated to 2500K until the equilibrium
N2(g) + O2(g)l 2NO was established with an equilibrium constant Kc = 2.1 × 103. At equilibrium,
the mol% of NO was 1.8. Estimate the initial composition of air in mol fraction of N2 and O2.
[JEE 1997]
Q.2 For the reaction CO(g) + H2O l CO2(g) + H2(g) at a given temperature the equilibrium amount of
CO2(g) can be increased by :
(A) adding a suitable catalyst (B) adding an inert gas
(C) decreasing the volume of the container (D) increasing the amount of CO(g) .
[JEE 1998]
Q.3 For the reaction, N2O5(g) = 2 NO2(g) + 0.5 O2(g), calculate the mole fraction of N2O5(g) decomposed
at a constant volume & temperature, if the initial pressure is 600 mm Hg & the pressure at any time is
960 mm Hg. Assume ideal gas behaviour . [JEE 1998]
Q.4 The degree of dissociation is 0.4 at 400K & 1.0 at m for the gasoeus reaction
PCl5 l PCl3 + Cl2(g). Assuming ideal behaviour of all gases. Calculate the density of equilibrium
mixture at 400K & 1.0 atm pressure. [JEE 1999]
Q.5 When 3.06g of solid NH4HS is introduced into a two litre evacuated flask at 27°C, 30% of the solid
decomposes into gaseous ammonia and hydrogen sulphide.
(i) Calculate KC & KP for the reaction at 27°C.
(ii) What would happen to the equilibrium when more solid NH4HS is introduced into the flask?
[JEE 2000]
Q.6 When 1-pentyne (A) is treated with 4N alcoholic KOH at 175°C, it is converted slowly into an equilibrium
mixture of 1.3% 1-pentyne (A), 95.2% 2–pentyne (B) & 3.5% of 1, 2,–pentadiene (C). The equilibrium
was maintained at 1750C. Calculate G° for the following equilibria.
B =A G10 = ?
B= C G20 = ?
From the calculated value of G10 & G20 indicate the order of stability of A, B & C. Write a reasonable
reaction mechanism sharing all intermediate leading to A, B & C. [JEE 2001]
Q.7 N2O4(g) l 2NO2(g)
This reaction is carried out at 298 K and 20 bar. 5 mol each of N2O4 and NO2 are taken initially.
Given: G oN 2O 4 = 100 kJ mol–1; G oNO2 = 50 kJ mol–1
(i) Find G for reaction at 298 K under given condition.
(ii) Find the direction in which the reaction proceeds to achieve equilibrium. [JEE 2004]
Q.8 N2 + 3H2 l 2NH3
Which is correct statement if N2 is added at equilibrium condition?
(A) The equilibrium will shift to forward direction because according to II law of thermodynamics the
entropy must increases in the direction of spontaneous reaction.
(B) The condition for equilibrium is G N 2 3G H 2 2G NH 3 where G is Gibbs free energy per mole of the
gaseous species measured at that partial pressure. The condition of equilibrium is unaffected by the
use of catalyst, which increases the rate of both the forward and backward reactions to the same
extent.
(C) The catalyst will increase the rate of forward reaction by and that of backward reaction by .
(D) Catalyst will not alter the rate of either of the reaction. [JEE 2006]
ANSWER KEY
EXERCISE I
Q.1 (a) 25, shifts left, (b) 0.22, shifts right, (c) , shifts left, (d) 1, shifts right, (e) 0, shift right, (f) 4, shifts left
Q.2 (a) K = [Ag+][Cl–] is less than 1. AgCl is insoluble thus the concentration of ions are much less than 1 M
(b) K = 1/[Pb2+][Cl–] 2 is greater than one because PbCl2 is insoluble and formation of the solid will
reduce the concentration of ions to a low level
Q.4 K about 10 Q.6p (a) incomplete (b) almost complete Q.7 c Q.8 ~ 9× 10 –32 mol/L
Q . 9 The reaction is not an equilibrium because Qc > Kc. The reaction will proceed from right to left to reach
equilibrium
Q.11 5.9 × 10–3 M Q.12 [NO] = 0.056 M, [N2] = [O2] = 1.37 M
Q.13 [PCl3] = [Cl2] = 0.071 M, [PCl5] = 0.089
Q.14 PCIF = PF2 = 0.389 atm, PClF3 = 1.08 atm
Q . 1 5 KP = 0.4, a ~ 0.1 Q . 1 6 50%
–3 –1
Q.17 (a) 6.667 × 10 mol L ; (b) n (N 2 O 4 ) = 0.374 mol; n (NO 2 ) = 0.052 mol ;
(c) 10.49 atm (d) 6.44 %
Q.18 0.97 atm Q.19 KP = 1.3 × 10-3 atm-2
Q.20 Kp = 2.5 atm, P = 15 atm Q . 2 1 53.33%
Q.22 K = 4 Q.23 31/27 Q.24 22.4 mg
Q.25 PH 2O = 5 × 1015 atm Q.26 0.821 atm
Q.27 add N2, add H2, increase the pressure , heat the reaction
Q.28 (a) shift right, shift left, (b) shift right, no effect, (c) shift left, shift left, (d) shift left, shift right
Q.29 (a) K = [CH3OH]/[H2]2[CO] ,
(b) 1. [H2] increase, [CO] decrease, [CH3OH] increase ; 2. [H2] increase, [CO] decrease, [CH3OH]
decrease ; 3. [H2] increase, [CO] increase, [CH3OH] increase ; 4. [H2] increase, [CO] increase,
[CH3OH] increase ; 5. [H2] increase, [CO] increase, [CH3OH] decrease ; 6. no change
Q.30 (a) K = [CO][H2]/[H2O] ;
(b) in each of the following cases the mass of carbon will change, but its concentration (activity) will not
change. 1. [H2O] no change, [CO] no change, [H2] no change ; 2. [H2O] decrease, [CO] decrease,
[H2] decrease ; 3. [H2O] increase, [CO] increase, [H2] decrease; 4. [H2O] increase, [CO] increase,
[H2] increase ; 5. [H2O] decrease , [CO] increase , [H2] increase
Q.31 b
Q.32 Add NaCl or some other salt that produces Cl– in the solution. Cool the solution.
Q.33 a
kf [C ]
Q.34 kf [A][B] = kr [C] ; k [A][B] = kc Q.36 216
r
Q.38 (i) 2; (ii) 1.2 mol/L; (iii) 0.1 moles/hr
Q.39 kr increase more than kf, this means that Ea (reverse) is greater than Ea (forward). The reaction is
exothermic when Ea (reverse) > Ea (forward).
Q.43 (a) –9.574 J/mol, (b) A = 1010, (c) 9.96 ×109, (d) 9.98 × 109
Q.44 16.06 kJ Q.45 –810 J/mol ; – 5872 J/mol and 41.3 kJ / mol
Q.46 1.3 × 108 Q.47 0.058
Q.48 29.0 Q.49 Kp = 0.0313 atm, Kc = 1.28 × 10–3
[CO 2 ]3 (PCO )3 1 1
2
Q.50 (a) Kc = , Kp = , (b) K = , K = P
[CO]3 (PCO )3 c [O 2 ]3 p (PO )3 , (c) Kc = [SO3], Kp = SO 3
2
Kc = [Ba2+] [SO42–]
Q.51 Kc = 1.51k Kp = 49.6 Q.52 1.5 × 10–6 M
Q.53 [CO] = [H2] = 0.18 M ; [H2O] = 1.02 M
Q.54 (a) Kc= 0.573 and Kp= 23.5; (b) to the right, [PCl5] =0.365 M; [PCl3] = 0.285 M, ; [Cl2] = 0.735 M
Q.56 –1.005 kJ/ mol Q.57 G° = 0 ; K = 1
Q.58 H°= 9.04 kJ/mol; S°= –8.64 J/mol K–1–1
PROFICIENCY TEST
1 1
1. C 2. high 3. 4.
10 K
5. exothermic 6. KP = KC (RT) 7. backward 8. G° = – RT lnK
K2 H T2 T1
9. log K = 2.303 R T T 10. zero 11. mol2L–2
1 2 1
12. temperature 13. Guldberg and Waage 14. decreases
15. backward 16. high 17. KP = KC (RT)n
18. decreases 19. same amount of 20. larger value of
21. T 22. T 23. F 24. F
25. T 26. F 27. T 28. T
29. F 30. T 31. T 32. T
33. F 34. F 35. F 36. F
37. T 38. F 39. T 40. F
EXERCISE II
EXERCISE IV
Q.1 XN2= 0.79, XO2= 0.21 Q.2 D
Q.3 Fraction decomposed = 0.4
Q.4 4.54 g dm–3 Q.5 (i) kc= 8.1 × 10–5 mol2 L2 ; kp = 4.91 × 10–2 atm2 (ii) Noeffect;
Q.6 15991 J mol , 12304 J mol–1 ; B > C > A
–1