Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

TY-RCUB20(F1V4)

External Remote Control Unit (RCU) for Tongyu Variable Electrical Tilt (VET) base station
antennas with adjustable electrical downtilt and appropriate mechanical interface.

Electrical specifications
Product number TY-RCUB20(F1V4)
Release Version A4
Standard AISG 2.0/3GPP release 8
AISG device type S-RET(0x01)
Input voltage range 10-30V DC (pin 1 or pin 6)
Power consumption (idle) <1W
Power consumption (tilting) <6W @ 12V, <9W @ 24V
2 x 8 pin connector according IEC 60130-9; conforming
to AISG2.0
Connectors
Daisy chain in: male; Daisy chain out: female
Ready for daisy chain connection
RS 485A/B (pin 5, pin 3);
Hardware interfaces power supply (pin 1, pin 6); DC return (pin 7);
conform to AISG2.0
Data rate 9.6 kbps
Firmware Remotely upgradeable by .bin or .xml file
Adjustment time (full range) 40sec (typically, depending on antenna type)
Adjustment cycles > 50,000
Mechanical specifications
Dimensions(mm) 160 × 48.5 × 50
Packing size(mm) 195 × 85 × 75
Weight(kg) 0.36
Profile: Aluminum, coated
Housing Material Connector: Aluminum with polyester powder, coated
varnished housing (RAL 7035, orange gray)
Environmental specifications
Temperature range -40 °C to +65 °C
3KA(8/20μs) @ pin 5 & pin 3;
Lightning protection
5KA(8/20μs) @ pin 1/pin 6 & pin 7
Protection class IP 65 (installed)
Features:
-Suitable for daisy chain connection
-Easy attachment without dismantling antennas
-Accurate adjustable downtilt
-Support customized solution
Notes:
-Install RCU according to installation manual
-Keep the protection cap of the last chain out socket if not used

This publication is issued to provide information only and is not to form part of any order or contract.
Tongyu reserves the right to change specifications without prior notice. A02201811280000000020134016
website: www.tycc.cn Email: [email protected] Fax: +86-760-85594662 Tel: +86-760-85318111

You might also like