Scribd Logo
Upload

Welcome to Scribd!

  • Sea Sovereign: Test Specification and Protocol FOR Deck Crane

    Uploaded by

    PT INDORAD MEGA BINTANG
    21 views4 pages
    This document provides the technical specifications, testing procedures and results for load testing a deck crane on a vessel called the Sea Sovereign. The crane's specifications include a maximum lifting capacity of 2.2 tons at 12.2 meters or 5.9 tons at 6 meters. The test procedures involve lifting 125% of the crane's rated capacity at different boom lengths and radii to test stability. The results section documents the actual loads lifted compared to the load chart capacities at various boom configurations and angles.

    Original Description:

    Original Title

    Untitled

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides the technical specifications, testing procedures and results for load testing a deck crane on a vessel called the Sea Sovereign. The crane's specifications include a maximum lifting capacity of 2.2 tons at 12.2 meters or 5.9 tons at 6 meters. The test procedures involve lifting 125% of the crane's rated capacity at different boom lengths and radii to test stability. The results section documents the actual loads lifted compared to the load chart capacities at various boom configurations and angles.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    21 views4 pages

    Sea Sovereign: Test Specification and Protocol FOR Deck Crane

    Uploaded by

    PT INDORAD MEGA BINTANG
    This document provides the technical specifications, testing procedures and results for load testing a deck crane on a vessel called the Sea Sovereign. The crane's specifications include a maximum lifting capacity of 2.2 tons at 12.2 meters or 5.9 tons at 6 meters. The test procedures involve lifting 125% of the crane's rated capacity at different boom lengths and radii to test stability. The results section documents the actual loads lifted compared to the load chart capacities at various boom configurations and angles.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    of 4

    P/NO : Protocol /14

    REV. : 00
    SEA SOVEREIGN
    PAGE : 1 of 5

    TEST SPECIFICATION AND PROTOCOL

    FOR

    DECK CRANE
    P/NO : Protocol /14
    REV. : 00
    SEA SOVEREIGN
    PAGE : 2 of 5

    A. TECHNICAL SPECIFICATION

    DECK CRANE
    Qty : 1 unit
    Type : Marine Telescopic Boom Crane
    Make/Model : North American Crane / MCT 1040
    Max Lifting Capacity : 2.2 t @ 12.2 m
    5.9 t @ 6 m
    Slewing : 360 deg
    Slewing Speed : 0 - 1 rpm
    Luffing Speed : 40 sec
    Hoisting Speed : 10 m/min
    Winch : Planetary hyd winch
    Winch Capacity : 14mm of 66m wire rope
    Operator Console : Pedestal mounted
    Serial No. : MCT 1040-05-1715
    Supplier : Zicom Pte Ltd

    B. PROCEDURES

    NO. DESCRIPTION RESULT REMARK


    1. . – THE CRANE TO BE TESTED IN MAXIMUM
    LOAD AND MOMENT DURING THE BOOM
    RETRACTED, BOOM EXTENDED AND TO BE
    TESTED ON THE LOAD TEST CONSISTS OF
    LIFTING 125% OF LOAD CHART RATING. THIS
    TEST TO BE LOADED FOR 5 MINUTE. (SEE TABLE
    1)
    2. . – CHECK STABILITY OF THE VESSEL, WHICH IS
    LOAD WEIGHT OF 100 % OF RATED CAPACITY OF
    CRANE AT MAXIMUM LOAD RADIUS,
    INTERMEDIATE LOAD RADIUS AND MINIMUM
    LOAD RADIUS.
    . – CHECK PERFORM THE STABILITY OF THE
    VESSEL TO DETERMINE IF ANY AREAS OF THE
    P/NO : Protocol /14
    REV. : 00
    SEA SOVEREIGN
    PAGE : 3 of 5

    VESSEL INSTABILITY OCCUR WITH RESPECT TO


    CRANE SLEWING AT RATED LOAD. STARTING
    WITH BOOM RETRACTED, HOIST MAXIMUM
    LOAD RADIUS TEST WEIGHT 6" OF DECK.
    INCREASE LOAD RADIUS TO MAXIMUM, KEEP
    LOAD 6" ABOVE DECK BY PAYING OUT WITH
    WINCH. CONTINUE TO INCREASE LOAD RADIUS
    UNTIL THE TELESCOPE (EXTEND) BOOM
    CYLINDER IS FULLY EXTENDED OR UNTIL
    VESSEL HAS A 5O PITCH, WHICHEVER OCCURS
    FIRST. IF VESSEL PRODUCES A 5O PITCH FIRST,
    NOTE LOAD RADIUS WHEN THIS OCCURS.
    . – CAREFULLY SLEW CRANE ATHWART SHIP
    BOTH DIRECTION UNTIL BOOM IS
    PERPENDICULAR TO SHIP ' AXIS' OR UNTIL
    VESSEL LISTS 5O EITHER SIDE, WHICHEVER
    OCCURS FIRST. IF VESSEL PRODUCES A 5 O LIST
    FIRST, NOTE BEARING AND DISTANCE FROM
    SHIP AXIS.
    3 PERFORMANCE DECK CRANE
    (SATISF/UNSATISFY)
    P/NO : Protocol /14
    REV. : 00
    DEA OLYMPIAN
    PAGE : 4 of 4

    C. RESULT

    CRANE LOAD/OVER LOAD TESTING


    Boom Load 125 %
    Load Actual test Pressure
    No Description Boom length Chart Load Chart Angle Remark
    (Ton) (Psi.)
    (m) (Ton) (Ton)
    1 Load I 3 5.9 7.4 (6.0+1.60=7.60) 71 Load No 13 & 11
    2 Load II Retracted 7.5 4.8 6.0 6.0 23 Load No 13
    3 Load III 7.9 3.7 4.6 (1.8+2.5+0.25=4.55) 0 Load No 9,10,15
    4 Load VI 10.5 3.2 4.0 (2.5+1.8=4.3) 40 Load No 9 & 10
    Extended
    5 Load V 12.2 2.2 2.75 (2.5+0.25=2.75) 0 Load No 9 & 15
    Extended
    6 Load VI 10.32 2.2 - 2.5 0 Load No 9
    Slewing

    D. COMMENTS AND ENDOSMENT


    REMARKS: ………………………………………………………………………….

    ACCEPTANCE BY NAME SIGNATURE DATE

    QA Rep.

    ABS Surveyor

    Owner Rep.

    You might also like