Nptel How To Access

Introduction to Internet of Things - - Unit 1 - Ho... https://onlinecourses.nptel.ac.in/noc18_cs46/uni...
[email protected] ▼
Courses » Introduction to Internet of Things
Announcements Course Ask a Question Progress Mentor FAQ
Unit 1 - How to
access the portal
Course
outline
Assignment 0
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-07-31, 23:59 IST.
the portal assignment.
Lesson 1: How 1) Internet of Things (IoT) can be integrated with which of these separate domains: 1 point
to access the
home page?
a. Cloud-based storage and computing.
Lesson 2: How
to access the b. Cyber Physical Systems.
course page?
c. Big-data networks.
Lesson 3: How
d. All of these.
to access the
MCQ, MSQ No, the answer is incorrect.
and
Score: 0
Programming
assignments? Accepted Answers:
d. All of these.
Quiz :
Assignment 0
2) In the current market scenario, IoT captures the maximum share in which one of these? 1 point
Week 1
a. Industry
Week 2 b. Security
Week 3 c. Healthcare
d. Home automation
Week 4
No, the answer is incorrect.
Week 5 Score: 0
Accepted Answers:
Week 6 a. Industry
Week 7 3) The paging operation of a Bluetooth device is used for: 1 point
Week 8 a. Forming a connection between two Bluetooth devices.
b. Trying to discover other devices near it.

Week 9
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -

A project of In association with
Funded by
1 of 3 Friday 09 November 2018 07:27 AM

4) The main function

Powered ofby
the IoT Gateway can be summarized as: 1 point
Download Video
a. Forwarding packets between LAN and WAN on the IP layer.

Assignment
Solution b. Performs application layer functions between IoT nodes and other entities.
c. Enables local, short-range communication between IoT devices.
d. All of these

Score: 0
Accepted Answers:
a. Forwarding packets between LAN and WAN on the IP layer.
5) MANETs are: 1 point
a. Infrastructure oriented
b. Infrastructure less
c. Partially infrastructure oriented
d. Partially infrastructure less

Score: 0
Accepted Answers:
b. Infrastructure less
6) The approximation of the measured property sensed by a digital sensor induces: 1 point
a. Quantization error
b. Hysteresis error
c. Aliasing error
d. All of these

Score: 0
Accepted Answers:
a. Quantization error
7) Nested loop in Arduino is: 1 point
a. Loops in the same function
b. Loop inside a Loop
c. Infinte loop
d. Not supported

Score: 0
Accepted Answers:
b. Loop inside a Loop
8) A DC motor is a type of : 1 point
a. Pneumatic actuators
b. Hydraulic actuators
c. Electrical actuators
d. Mechanical actuator


Score: 0
Accepted Answers:
9) In SDN-based sensor network, one can manage: 1 point
a. Sensor nodes
b. Sensing delay
c. Network connectivity
d. All of the above

Score: 0
Accepted Answers:
d. All of the above
10)Which of these is NOT related to IoT scalability? 1 point
a. Flexibility within Internet.
b. Large scale deployment.
c. Real-time connectivity of billions of devices.
d. Range of each sensor node.

Score: 0
Accepted Answers:
d. Range of each sensor node.
Previous Page End

Introduction to Internet of Things - - Unit 2 - Week 1 https://onlinecourses.nptel.ac.in/noc18_cs46/uni...
Unit 2 - Week
1
Course
outline
Week 1 : Assignment 1
Week 1 1) Internet of Things (IoT) can be integrated with which of these separate domains: 1 point
Lecture 1: a. Cloud-based storage and computing.

Introduction to
IoT- Part-I b. Cyber Physical Systems.
Lecture 2: c. Big-data networks.
Introduction to
IoT- Part-II d. All of these.
Lecture 3: No, the answer is incorrect.

Sensing Score: 0
Lecture 4: Accepted Answers:
Actuation d. All of these.
Lecture 5: 2) Which of the following is true? 1 point
Basics of IoT
Networking-
Part- I a. IoT is a subset of M2M
Week 1: b. M2M is a subset of IoT

Lecture
c. IoT is a subset of CPS
Material
Quiz : Week 1 :
d. CPS is a subset of Web of Things (WoT)
Assignment 1
Feedback for Score: 0
Week 1
Accepted Answers:
b. M2M is a subset of IoT
Week 2
3) IoT Proxy operates in: 1 point
Week 3
a. Application layer
Week 4
b. Network layer
Week 5
Funded by

4) Which one Powered

of these is
bythe first technology in the chronological order of the evolution of IoT? 1 point
Week 9
a. ATM
Week 10
b. Web
Week 11
c. Smart City
Week 12 d. Smart healthcare
Download Video No, the answer is incorrect.

Score: 0
Assignment Accepted Answers:
Solution a. ATM
5) The protocol IKEv2 stands for: 1 point
a. Information Key Exchange version 2
b. Internet Key Exchange version 2
c. Internet Key Exclusion version 2
d. Inter-Key Exclusion version 2

Score: 0
Accepted Answers:
b. Internet Key Exchange version 2
6) The phenomenon of the output signal slowly changing, independent of the measured 1 point
property is called:
a. Aliasing
b. Drift
c. Hysteresis
d. None of these

Score: 0
Accepted Answers:
b. Drift
7) Which of these statements regarding sensors is TRUE? 1 point
a. Sensors are input devices.
b. Sensors can be analog as well as digital
c. Sensors respond to some external stimuli.
d. All of these

Score: 0
Accepted Answers:
d. All of these
8) Light activated polymers (LAPs) are a special type of: 1 point
a. Light dependent resistors
b. Shape memory polymers
c. Solar cells
d. None of these


Score: 0
Accepted Answers:
b. Shape memory polymers
9) Which of these is a part of the Sensing Layer of the IoT Service Oriented Architecture? 1 point
a. Service integration
b. Service repository
c. Business logic
d. Data sensing and actuation protocols.

Score: 0
Accepted Answers:
d. Data sensing and actuation protocols.
10)A DC motor is a type of : 1 point
a. Pneumatic actuators
b. Hydraulic actuators
d. Mechanical actuator

Score: 0
Accepted Answers:
Previous Page End

Unit 3 - Week
2
Course
outline
Week 1 1) Which of the following controls the publish-subscribe messaging pattern in MQTT. 1 point
Week 2 a. MQTT broker
Lecture 6: b. MQTT client

Basics of IoT
Networking-Part
c. MQTT server
II d. None of these
Lecture 7:
Basics of IoT
Networking-Part- Score: 0
III Accepted Answers:
Lecture 8: a. MQTT broker
Basics of IoT
2) AMQP is designed for connecting: 1 point
Networking-
Part-IV
a. Constrained networks
Lecture 9:
Connectivity b. LANs and WANs
Technologies-
Part-I c. Systems and Business processes
Lecture 10: d. None of these

Connectivity
Technologies-
Part-II Score: 0
Week 2:
Accepted Answers:
Lecture c. Systems and Business processes
Material
3) The MQTT publish-subscribe protocol is: 1 point
Quiz : Week 2 :
Assignment 2 a. Event driven
Feedback for b. Broker driven
Week 2

Funded by

4) REST stands for: by

Powered 1 point
Week 6
a. Representational State Transfer

Week 7
b. Resourceful Sensor Transfer
Week 8
c. Resourceful State Transport
Week 9 d. None of these
Week 10 No, the answer is incorrect.

Score: 0
Week 11 Accepted Answers:
a. Representational State Transfer
Week 12
5) Which of these is TRUE for XMPP? 1 point
Download Video
a. It is decentralized
Assignment
b. It supports interoperability
Solution
c. It does not guarantee QoS
d. All of these

Score: 0
Accepted Answers:
d. All of these
6) Which of these is a routing protocol for low-power lossy networks over IPv6? 1 point
a. RPL
b. OSPF
c. Both a and b
d. None of these

Score: 0
Accepted Answers:
a. RPL
7) In AMQP, link initiation in order to send and receive messages is done by which frame 1 point
type?
a. OPEN
b. ATTACH
c. BEGIN
d. FLOW

Score: 0
Accepted Answers:
b. ATTACH
8) RPL supports: 1 point
a. Message confidentiality
b. Loop detection in the routes
c. Data path validation
d. All of these


Score: 0
Accepted Answers:
d. All of these
9) Which statement is TRUE with respect to the IEEE 802.15.4 standard? 1 point
a. It is a low data-rate standard.
b. Used for architecting wireless PANs
c. Uses only two layers – PHY and MAC
d. All of these

Score: 0
Accepted Answers:
d. All of these
10)In the network layer, Zigbee follows which routing scheme? 1 point
a. AODV
b. DSDV
c. RIPv2
d. OSPF

Score: 0
Accepted Answers:
a. AODV
Previous Page End

Unit 4 - Week
3
Course
outline
Week 1 1) The HART protocol was designed for: 1 point
Week 2 a. Home automation networking
b. Networked Smart Field devices

Week 3
c. Vehicular networking
Lecture
11:Connectivity d. All of these
Technologies-
Part-III No, the answer is incorrect.
Score: 0
Lecture 12:
Connectivity Accepted Answers:
Technologies- b. Networked Smart Field devices
Part- IV
2) Channel hopping is performed at which HART layer? 1 point
Lecture 13:
Connectivity
Technologies- a. Physical
Part- V
b. Data link
Lecture 14:
c. Network
Sensor
Networks- Part- d. Application
I
Lecture 15:
Score: 0
Sensor
Networks- Part- Accepted Answers:
II b. Data link
Week 3: 3) Which amongst these is NOT a NFC mode of communication? 1 point
Lecture
Material
a. Peer to peer
Quiz : Week 3 :
Assignment 3 b. Read/write
Feedback for c. Card emulation

Week 3 © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
d. Beacon
Score: 0
Week 5
Accepted Answers: Funded by
d. Beacon

4) Bluetooth isPowered
a technology
by with : 1 point
Week 6
a. Full duplex links

Week 7
b. Half duplex links
Week 8
c. Both a and b

Score: 0
a. Full duplex links
Week 12
5) The PHY and MAC layers in ISA 100.11A are based upon; 1 point
Download Video
a. IEEE 802.11a
Assignment
b. IEEE 802.15.4
Solution
c. IEEE 802.15.6
d. IEEE 802.11g

Score: 0
Accepted Answers:
b. IEEE 802.15.4
6) The modulation scheme followed by Z-wave is: 1 point
a. BPSK
b. QPSK
c. GFSK
d. O-QSK

Score: 0
Accepted Answers:
c. GFSK
7) Which of these is NOT a part of sensor web? 1 point
a. Observations & measurements (O&M)
b. Energy efficiency
c. Sensor model language (sensorml)
d. Transducer model language (transducerml or TML)

Score: 0
Accepted Answers:
b. Energy efficiency
8) Which topology is supported by Z-wave: 1 point
a. Star
b. Mesh
c. Tree
d. All of these


Score: 0
Accepted Answers:
b. Mesh
9) Event aware topology management in WSNs include: 1 point
a. Timely detection of an event of interest
b. Monitoring the event
c. Adapting with the changes of event state
d. All of these

Score: 0
Accepted Answers:
d. All of these
10)WBAN stands for: 1 point
a. Wireless Buffer Area Networks
b. Wireless Body Area Networks
c. Wired Body Area Networks
d. Wired Buffer Area Networks

Score: 0
Accepted Answers:
b. Wireless Body Area Networks
Previous Page End

Unit 5 - Week
4
Course
outline
Week 1 1) With respect to WSN coverage problems, the OGDC algorithm is an acronym for: 1 point
Week 2 a. Optimal Geographic Density Control
b. Optimal Geographic Distance Control

Week 3
c. Optimal Geographic Distance Coverage
Week 4
d. Optimal geographic Density Coverage
Lecture 16:
Sensor
Networks- Score: 0
Part-III Accepted Answers:
Lecture 17: a. Optimal Geographic Density Control
Sensor
Networks- Part- 2) Which of these can be regarded as the salient feature(s) of a 3D UWSN architecture? 1 point
IV
a. Silent & energy-efficient scheme for mobile UWSNs
Lecture 18:
Sensor b. Iterative approach with less initiators nodes (anchors) required
Networks- Part-
V c. Mobility prediction
Lecture 19: d. All of these

UAV Networks
Lecture 20: Score: 0
Machine to
Machine Accepted Answers:
Communication d. All of these
Week 4: 3) EM communication for Nano-networks centers around: 1 point

Lecture
Material
a. 0.1-10 Terahertz channel
Quiz : Week 4 :
b. 0.1-10 Gigahertz channel
Assignment 4
c. 10-100 Terahertz channel
Feedback for
Week 4 d. 10-100 Gigahertz channel
Score: 0
Week 6
a. 0.1-10 Terahertz channel

4) WMSNs stand for: by

Powered 1 point
Week 7
a. Wired Multimedia Sensor Networks

Week 8
b. Wireless Multimedia Sensor Networks
Week 9
c. Wireless Mobile Sensor Networks
Week 10 d. Wireless Machine Sensor Network

Score: 0
b. Wireless Multimedia Sensor Networks
Download Video
5) UAV-VANETS link-up may be used for: 1 point
Assignment
Solution a. Visual guidance
b. Data-muling
c. Coverage enhancement
d. All of these

Score: 0
Accepted Answers:
d. All of these
6) Sensor coverage in WSNs deal with: 1 point
a. Sensor placement
b. Density control
c. Both a and b
d. None of these

Score: 0
Accepted Answers:
c. Both a and b
7) In WSN area coverage problem, which is TRUE? 1 point
a. Energy-efficient random coverage
b. Connected random coverage
c. A network is connected if any active node can communicate with any other active nodes
d. All of these

Score: 0
Accepted Answers:
d. All of these
8) In Human-centric sensing, which of these is NOT a constraint? 1 point
a. Energy of sensing devices
b. Privacy of users
c. Participant selection
d. Network size


Score: 0
Accepted Answers:
d. Network size
9) Which of these topologies cannot be a reliable UAV network topology 1 point
a. Star
b. Flat mesh
c. Hierarchical mesh
d. Tree

Score: 0
Accepted Answers:
d. Tree
10)Low-end M2M nodes are: 1 point
a. Mobile
b. Energy efficient
c. Complex
d. Costly

Score: 0
Accepted Answers:
b. Energy efficient
Previous Page End

Unit 6 - Week
5
Course
outline
Week 1 1) In what type of pin, data pin of DHT sensor should be connected? 1 point
Week 2 a. analog pin
b. digital pin
Week 3
c. any one of (a) and (b)
Week 4
d. None of this
Score: 0
Lecture 21 :
Interoperability Accepted Answers:
in Internet of b. digital pin
Things
2) Why interoperability is required? 1 point
Lecture 22 :
Introduction to
Arduino- I a. Heterogeneous wireless communication protocols
Lecture 23 : b. Different programming languages

Introduction to
c. Different control models
Arduino- II
Lecture 24 :
d. All of the above
Integration of
Sensors and
Actuators with Score: 0
Arduino- I Accepted Answers:
Lecture 25 : d. All of the above
Integration of
3) What type of Arduino pin is used to give command to Servo motor? 1 point
Sensors and
Actuators with
Arduino- II a. Analog pin
Week 5: b. Digital pin

Lecture
Material c. Any one of (a) and (b)
Quiz d. None of this
A project of : Week 5 : In association with
Assignment 5
Feedback for Score: 0
Week 5
b. Digital pin

4) Arduino boards support

Powered by output supply voltage of: 1 point
Week 6
a. 5V only
Week 7
b. 3.3 V only
Week 8
c. 9 V only
Week 9 d. 5V, 3.3V

Score: 0
d. 5V, 3.3V
Week 12
5) Arduino UNO supports these numbers of PWM pins: 1 point
Download Video
a. 1
Assignment
b. 5
Solution
c. 6
d. 14

Score: 0
Accepted Answers:
c. 6
6) 1 point
a. Prints the value from sensor to console every 1000 miliseconds
b. Prints the value from the sensor to console every 100 miliseconds
c. Prints the value from the sensor to console if it is more than 1000, every 100 miliseconds
d. Prints the value from the sensor to console if it is delayed by 1000 seconds

Score: 0
Accepted Answers:
c. Prints the value from the sensor to console if it is more than 1000, every 100 miliseconds
7) What is the servo library command to move the shaft of Servo motor back and forth across 1 point
180 degree?
a. Knob()
b. Sweep()
c. write()
d. detach()

Score: 0
Accepted Answers:
c. write()
8) Arduino setup requires: 1 point

a. Arduino board and IDE
b. Arduino board, programmer board, IDE
c. Both A and B
d. None

Score: 0
Accepted Answers:
a. Arduino board and IDE
9) Which of the following library functions can be used to generate a random number in 1 point
Arduino?
a. randomize()
b. ran()
c. rand()
d. random()

Score: 0
Accepted Answers:
d. random()
10)Which pin of Arduino should be connected with the pin 3 of the 4-pin DHT sensor? 1 point
a. Pint 5V
b. Pin 3.3V
c. Pin GND
d. None of the these

Score: 0
Accepted Answers:
d. None of the these
Previous Page End

Unit 7 - Week
6
Course
outline
Week 1 1) Which one is correct for the nested controlling statements in Python? 1 point
Week 2 a. Elseif
b. Elif
Week 3
c. Ifwhile
Week 4
d. none
Score: 0
Week 6
Accepted Answers:
Lecture 26: b. Elif
Introduction to
Python 2) Which of the following datatype is correct for the object below? D = ['python', 3.43, 'p', 100] 1 point
Programming- I
a. Array
Lecture 27:
Introduction to b. Dictionary
Python
Programming- c. Tuple
II
d. List
Lecture 28:
Introduction to No, the answer is incorrect.
Raspberry Pi- I Score: 0

Introduction to d. List
Raspberry Pi- II
3) Which of the following is mutable object in python? 1 point
Lecture 30:
Implementation
a. Tuple
of IoT with
Raspberry Pi- I b. Bool
Week 6 :
c. Int
Lecture © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
Material d. List
Quiz : Week 6 : No, the answer is incorrect.
Assignment 6
Score: 0
Feedback for Accepted Answers: Funded by
Week 6
d. List

4) What is thePowered
maximumbyperipheral current draw allowed in Raspberry pi 3? 1 point
Week 7
a. 1200mA
Week 8
b. 700mA
Week 9
c. 500mA
Week 10 d. 100mA

Score: 0
a. 1200mA
Download Video
5) What does the method isatty() return for an existing interactive file stream in Python: 1 point
Assignment
Solution a. Int
b. String
c. Bool:True
d. Bool:False

Score: 0
Accepted Answers:
c. Bool:True
6) Relay is a kind of: 1 point
a. Sensor
b. Actuator
c. Hub
d. Router

Score: 0
Accepted Answers:
b. Actuator
7) What are the mode/modes used for addressing the pins in Raspberry Pi? 1 point
a. GPIO
b. BCM
c. BOARD and BCM
d. GPIO, BCM and CAN

Score: 0
Accepted Answers:
c. BOARD and BCM
8) The BCM 14 pin of Raspberry Pi is: 1 point
a. Physical pin 8
b. UART
c. Transmitter pin
d. All of these


Score: 0
Accepted Answers:
d. All of these
9) Internet of Things refers to: 1 point
a. Interconnection of devices in a network
b. Exchange of data between devices in a network
c. An ecosystem of devices, accessible through internet
d. All of the above

Score: 0
Accepted Answers:
d. All of the above
10)Devices in IoT support: 1 point
a. Sensing
b. Actuating
c. Data Collection
d. All of the above

Score: 0
Accepted Answers:
d. All of the above
Previous Page End

Unit 8 - Week
7
Course
outline
Week 7: Assignment 7
Week 1 1) Opening a file in append mode in Python: 1 point
Week 2 a. Overrides the existing data in the file
b. Adds the new data to the end of the existing file

Week 3
c. Adds the new data at the beginning of the existing file
Week 4
d. Cannot write data to a file in append mode
Score: 0
Week 6
Accepted Answers:
b. Adds the new data to the end of the existing file
Week 7
2) Control message from a switch to controller in SDN is termed as: 1 point
Lecture 31 :
Implementation
of IoT with a. Flow-rule message
Raspberry Pi- II
b. PACKET-IN message
Lecture 32 :
Implementation c. Control message
of IoT with
d. Data message
Raspberry Pi-
III No, the answer is incorrect.
Lecture 33 : Score: 0
Software Accepted Answers:
Defined
b. PACKET-IN message
Networking-
Part- I 3) Bind() function in Python socket programming is used to: 1 point
Lecture 34 :
Software a. Specify the port for service on the specified host
Defined
Networking- b. Read data from the socket
Part- II
c. Send data to the socket
Lecture 35 : © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
d. Initiate the connection
Software
Defined IoT
Networking-
Part- I Score: 0
Week 7:
a. Specify the port for service on the specified host

Lecture 4) Protocol used for connectionless

Powered by socket programming: 1 point
Material
Quiz : Week 7: a. TCP

Assignment 7
b. UDP
Feedback for
Week 7 c. Both
d. None
Week 8
Week 9 Score: 0
Accepted Answers:
Week 10
b. UDP
Week 11 5) When does a switch send PAKCET-IN message to a controller in SDN? 1 point
Week 12 a. Flow-rule associated with a received flow does not exist
b. All the time

Download Video
c. After deleting a flow-rule
Assignment
Solution d. None of the above

Score: 0
Accepted Answers:
a. Flow-rule associated with a received flow does not exist
6) Which one is an SDN controller: 1 point
a. POX
b. OpenDayLight
c. ONOS
d. All of the above

Score: 0
Accepted Answers:
d. All of the above
7) Give the output of the following snippet: 1 point

Name= “Split-this-string”
Name.split(“-”)
a. [“Split”, “this”, “string”]
b. Split, this, string
c. [“Split-“, “this-“, “string”]
d. Split this string

Score: 0
Accepted Answers:
a. [“Split”, “this”, “string”]
8) Application program interface (API) used between application and control planes is known 1 point
as:
a. Northbound API
b. Eastbound API

c. Southbound API
d. Westbound API

Score: 0
Accepted Answers:
a. Northbound API
9) An SDN Controller can be placed based on: 1 point
a. Hierarchical manner
b. Star-topology
c. Mesh topology
d. All of the above

Score: 0
Accepted Answers:
d. All of the above
10)Which of the following is not a function in matplotlib library of Python: 1 point
a. Display()
b. Show()
c. Subplot()
d. Title()

Score: 0
Accepted Answers:
a. Display()
Previous Page End

Unit 9 - Week
8
Course
outline
Week 1 1) The major challenge(s) in Software Defined IoT is(are): 1 point
Week 2 a. Mobility of devices
b. Heterogeneity of devices
Week 3
c. Resource-constraint
Week 4
d. All of the above
Score: 0
Week 6
Accepted Answers:
d. All of the above
Week 7
2) From the below given options, which is not a characteristic of cloud computing? 1 point
Week 8
Lecture 36 :
a. Low management effort
Software b. Low level generalization of computation
Defined IoT
Networking- II c. On-demand network access
Lecture 37 : d. Configurable computing resources
Cloud
Computing- No, the answer is incorrect.
Fundamental Score: 0
Lecture 38 : Accepted Answers:
Cloud b. Low level generalization of computation
Computing-
Service Model 3) Pre-configure facility for allocation of virtualized resources comes under 1 point
Lecture 39 :
Cloud a. Availability and reliability
Computing-
b. Scalability and elasticity
Service
Management c. Manageability and interoperability
and Security © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
d. Measured Services
A project of 40 :
Lecture In association with
Cloud No, the answer is incorrect.
Computing- Score: 0
Case Studies
Week 8 : c. Manageability and interoperability

Lecture 4) If the devices are highly

Powered by mobile in IoT, one of the disadvantage of using SDN can be: 1 point
Material
Quiz : Week 8 : a. High control overhead

Assignment 8
b. Low data rate
Feedback for
Week 8 c. All of the above
d. None of the above

Week 9
Week 10 Score: 0
Accepted Answers:
Week 11
a. High control overhead
Week 12 5) Broad network access in cloud deals with 1 point
Download Video a. Dynamic allocation for scale out
b. Recorded resource usage

Assignment
Solution c. Availability of cloud resources over the network
d. All of the above

Score: 0
Accepted Answers:
c. Availability of cloud resources over the network
6) Mice flows have: 1 point
a. Large duration
b. Short duration
c. Moderately large duration

Score: 0
Accepted Answers:
b. Short duration
7) What is the full form of HDFS? 1 point
a. Hadoop distributed file system
b. Hadoop database file system
c. Half-duplex file system
d. Hadoop decentralized file system

Score: 0
Accepted Answers:
a. Hadoop distributed file system
8) Which of the following is not a part of Hadoop? 1 point
a. HDFS
b. YARN
c. Both the above


Score: 0
Accepted Answers:
9) GreenCloud Simulator is designed based on 1 point
a. NS-3
b. NS-2
c. CloudSim
d. DCSim

Score: 0
Accepted Answers:
b. NS-2
10)The disadvantage(s) of private cloud is/are: 1 point
a. Total control over the system and data
b. Regular maintenance
c. Minimum security concerns
d. All of the above

Score: 0
Accepted Answers:
b. Regular maintenance
Previous Page End

Introduction to Internet of Things - - Unit 10 - ... https://onlinecourses.nptel.ac.in/noc18_cs46/uni...
Unit 10 - Week
9
Course
outline
Week 1 1) Resource usage information in service accounting is obtained in the form of 1 point
Week 2 a. Data set
b. Tables
Week 3
c. Records
Week 4
d. Any form
Score: 0
Week 6
Accepted Answers:
c. Records
Week 7
2) We normally take snapshot in Openstack, _______. 1 point
Week 8
a. After the installation of an instance
Week 9
b. Before the installation of an instance
Lecture 41 :
Cloud c. It is an inbuilt image in Openstack
Computing-
Practical
d. It should be downloaded from the internet
Lecture 42 : No, the answer is incorrect.

Sensor-Cloud- I Score: 0

Sensor-Cloud- a. After the installation of an instance
II
3) Sensor-Cloud deals with 1 point
Lecture 44 :
Fog
a. Sensor-for-Service
Computing- I
b. Sensor-as-a-Service
Lecture 45 :
Fog c. Sensor-in-Cloud
Computing- II © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
d. None of these
A project
Weekof 9: In association with
Lecture No, the answer is incorrect.
Material Score: 0
Quiz : Week 9 : Accepted Answers: Funded by
Assignment 9 b. Sensor-as-a-Service

Feedback for 4) Which of the following

Powered bystatement is TRUE in sensor-cloud 1 point
Week 9
a. End user procures sensors and lends these to sensor-cloud service provider
Week 10
b. Sensor-cloud is based only on dumping the sensor data to the cloud
Week 11 c. Single sensor nodes is shared dedicatedly with only one end user

Download Video
Score: 0
Assignment Accepted Answers:

Solution d. None of these
5) Blue Pill attack on hypervisor is a threat example of: 1 point
a. Host security at PaaS level
b. Host security at SaaS level
c. Host security at IaaS level

Score: 0
Accepted Answers:
c. Host security at IaaS level
6) Why data volume is a problem in IoT-based cloud computing? 1 point
a. because data are encrypted and hard to analyze
b. because data coming from IoT devices are always in raw format and difficult to store
c. because the density of IoT devices is increasing each day and in turn the volume of
generated data is growing very fast
d. because IoT device density is decreasing each day and in turn the volume of generated
data are decreasing very fast

Score: 0
Accepted Answers:
c. because the density of IoT devices is increasing each day and in turn the volume of generated data is
growing very fast
7) Which layer is responsible for user authentication in cloud computing 1 point
a. IaaS layer
b. PaaS layer
c. SaaS layer
d. Both IaaS and PaaS layer

Score: 0
Accepted Answers:
b. PaaS layer
8) What is a good approach to reduce latency? 1 point
a. Analyzing data close to the data source
b. Analyzing data in cloud

c. Increasing number of nodes
d. Decreasing number of nodes

Score: 0
Accepted Answers:
a. Analyzing data close to the data source
9) What are less time-sensitive data? 1 point
a. Data which can be analyzed after seconds or minutes
b. Data which should be analyzed within fraction of a second
c. Data which can be wait for hours, days, weeks
d. Data which can be wait for months

Score: 0
Accepted Answers:
a. Data which can be analyzed after seconds or minutes
10)How many layers exist in CloudSim architecture? 1 point
a. 4
b. 1
c. 3
d. 2

Score: 0
Accepted Answers:
c. 3
Previous Page End

Unit 11 - Week
10
Course
outline
Week 1 1) Which of these can be considered as the skeleton for smart cities? 1 point
Week 2 a. Buildings
b. Transportation
Week 3
c. Banks
Week 4
d. Sensors
Score: 0
Week 6
Accepted Answers:
a. Buildings
Week 7
2) Which company first coined fog computing? 1 point
Week 8
a. IBM
Week 9
b. HP
Week 10
c. Dell
Lecture 46 : d. CISCO
Smart Cities
and Smart No, the answer is incorrect.
Homes- I Score: 0
Smart Cities d. CISCO
and Smart
Homes- II 3) Smart Agriculture incorporates: 1 point
Lecture 48 :
Smart Cities a. Alert generation in case of above-threshold pollutants in the air or water.
and Smart
Homes- III b. Scheduling harvesting and arranging proper transfer of harvests to warehouses or
markets.
Lecture 49 :
Connected © 2014c.NPTEL - Privacy
Both the above& Terms - Honor Code - FAQs -
Vehicles-
A project of I In association with
d. None of these
Lecture 50 :
Connected No, the answer is incorrect.
Vehicles- II Score: 0
Funded by
Accepted Answers:

Week 10: b. SchedulingPowered

harvesting
by and arranging proper transfer of harvests to warehouses or markets.
Lecture
Material 4) Heterogeneity for IoT in smart cities stands for: 1 point
Quiz : Week 10 a. Integration of varying hardware platforms and specifications.

: Assignment
10 b. Integration of different radio specifications.
Feedback for c. Integration of various software platforms.

Week 10
d. All of these
Week 11
Score: 0
Week 12
Accepted Answers:
Download Video d. All of these
5) What are the main characteristics of a fog node? 1 point

Assignment
Solution
a. Storage
b. Storage and computing capability
c. Computing and networking capability
d. Storage, computing and networking capability

Score: 0
Accepted Answers:
d. Storage, computing and networking capability
6) Which of these connects cable-based networks with wireless networks for increased 1 point
sharing of media, control and access and can share network media resources?
a. UPnP
b. DLNA
c. LAN
d. WiFi

Score: 0
Accepted Answers:
b. DLNA
7) Which of these can be categorized as probability based mathematical model for data 1 point
fusion?
a. ANN
b. Machine learning
c. Bayesian analysis
d. Belief networks

Score: 0
Accepted Answers:
c. Bayesian analysis
8) X-10 protocol is characterized by: 1 point
a. Low-speed and low data rate.
b. Low speed and high data rate

c. High speed and low data rate
d. High speed and high data rate

Score: 0
Accepted Answers:
a. Low-speed and low data rate.
9) A smart home consists of: 1 point
a. Sensor networks
b. Communication network infrastructure
c. Intelligent control and management
d. All of these

Score: 0
Accepted Answers:
d. All of these
10)UPnP stands for: 1 point
a. United Protocol and Plugs
b. Universal Protocol and Plugs
c. Universal Plug and Play
d. United Plug and Play

Score: 0
Accepted Answers:
c. Universal Plug and Play
Previous Page End

Unit 12 - Week
11
Course
outline
Week 1 1) Renewable energy is generated from – 1 point
Week 2 a. Natural resources
b. Artificial resources
Week 3
c. Nuclear resources
Week 4
d. All of the above
Score: 0
Week 6
Accepted Answers:
a. Natural resources
Week 7
2) Smart grid enables – 1 point
Week 8
a. Distributed energy management
Week 9
b. Centralized energy management
Week 10
c. Both distributed and centralized energy management

Smart Grid- I Score: 0

Smart Grid- II a. Distributed energy management
Lecture 53: 3) Self-healing in smart grid can be done using – 1 point

Industrial
Internet of
a. Dampening unwanted power oscillations
Things- I
Lecture 54:
b. Avoiding unwanted flows of current through the grid
Industrial
c. Rerouting power flows in order to avoid overloading in a transmission line
Internet of © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
Things- II d. All of these
Data Handling
Score: 0
and Analytics- I
Week 11 :
d. All of these

Lecture 4) 4. Connected vehicles

Powered by are capable of: 1 point
Material
Quiz : Week 11 a. Communicating with other devices within the vehicle

: Assignment
b. Communicating with other similar vehicles
11
Feedback for c. Communicating with fixed infrastructure

Week 11
d. All of these

Score: 0
Download Video
Accepted Answers:
d. All of these
Assignment
Solution 5) The V2X paradigm follows: 1 point
a. A distributed architecture
b. A centralized architecture
c. Both a and b
d. None of these

Score: 0
Accepted Answers:
a. A distributed architecture
6) IIoT is mainly focused on 1 point
a. Convenience of individuals
b. Efficiency, safety and security of operation and individuals.
c. Efficiency of the system.
d. Data security.

Score: 0
Accepted Answers:
b. Efficiency, safety and security of operation and individuals.
7) What is the key technology to enable V2V and V2R communication? 1 point
a. RFID Communication
b. Dedicated Short Range Communication
c. Long Range Communication
d. Medium Range Communication

Score: 0
Accepted Answers:
b. Dedicated Short Range Communication
8) RSUs are connected to the Internet by: 1 point
a. Relays
b. Routers
c. Gateways
d. None of these


Score: 0
Accepted Answers:
c. Gateways
9) In smart grid, electricity flow is – 1 point
a. Unidirectional
b. Bi-directional
c. Multi-directional
d. All of the above

Score: 0
Accepted Answers:
b. Bi-directional
10)What are the risks associated with IIoT? 1 point
a. Lack of vision and leadership
b. Cheap sensors
c. Confident workforce
d. Both cheap sensors and confident workforce

Score: 0
Accepted Answers:
a. Lack of vision and leadership
Previous Page End

Unit 13 - Week
12
Course
outline
Week 1 1) Passive and omnidirectional sensor is 1 point
Week 2 a. Temperature
b. Water-level
Week 3
c. Soil moisture
Week 4
d. All of the above
Score: 0
Week 6
Accepted Answers:
d. All of the above
Week 7
2) If all the data points are same, statistical dispersion becomes – 1 point
Week 8
a. 1
Week 9
b. 10
Week 10
c. 100
Week 11 d. None

Week 12
Score: 0
Data Handling
d. None
and Analytics-
II 3) Which of the following can be the reasons for packet drop in IoT network? 1 point
Lecture 57:
Case Study: a. Dense foliage
Agriculture
b. High temperature
Lecture 58:
Case Study: c. Rain
Healthcare © 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
d. All of the above
Lecture 59:
Case Study: No, the answer is incorrect.
Activity Score: 0
Monitoring - I
Lecture 60: d. All of the above

Case Study: 4) The characteristics

Poweredof bya sensor node are 1 point
Activity
Monitoring - II
a. Energy-efficiency
Week 12 :
b. Distributed sensing
Lecture
Material c. Low-cost
Quiz : Week 12
d. All of the above
: Assignment
12 No, the answer is incorrect.
Score: 0
Download Video
Accepted Answers:
Assignment d. All of the above
Solution
5) What is the network topology of Ambusens WBAN devices 1 point
a. Bus topology
b. Star Topology
c. Mesh Topology

Score: 0
Accepted Answers:
b. Star Topology
6) Long term trend tracking and preventive care in IoT healthcare is possible due to 1 point
a. ability of smart devices to collect data autonomously
b. ubiquitous connectivity
c. smart algorithms and analytics
d. all of the above

Score: 0
Accepted Answers:
d. all of the above
7) IoT-based sensing layer devices typically communicate with each other using which of the 1 point
following?
a. Short range communication technologies such as Bluetooth and Zigbee
b. Long range communication technologies such as WLAN, WiMAX and LTE
c. Both may be used
d. Devices do not communicate with each other

Score: 0
Accepted Answers:
a. Short range communication technologies such as Bluetooth and Zigbee
8) Activity monitoring in smart homes: 1 point
a. Provides better quality of life
b. Provides information accurately in a reliable manner
c. Provides continuous monitoring support.
d. All of these


Score: 0
Accepted Answers:
d. All of these
9) Which of these sensors can be most cheaply used for activity monitoring in wearables? 1 point
a. Accelerometer
b. Cameras
c. LIDARs
d. LED

Score: 0
Accepted Answers:
a. Accelerometer
10)Network-based activity recognition is: 1 point
a. Larger and processing intensive
b. Low power consumption
c. Dependent on network connection
d. All of these

Score: 0
Accepted Answers:
d. All of these
Previous Page End

Nptel How To Access

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nptel How To Access

Uploaded by

Copyright:

Available Formats

Introduction to Internet of Things - - Unit 1 - Ho... https://onlinecourses.nptel.ac.in/noc18_cs46/uni...

Courses » Introduction to Internet of Things

Announcements Course Ask a Question Progress Mentor FAQ

Week 7 3) The paging operation of a Bluetooth device is used for: 1 point

Week 8 a. Forming a connection between two Bluetooth devices.

b. Trying to discover other devices near it.

© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -

1 of 3 Friday 09 November 2018 07:27 AM

4) The main function

a. Forwarding packets between LAN and WAN on the IP layer.

c. Enables local, short-range communication between IoT devices.

No, the answer is incorrect.

5) MANETs are: 1 point

c. Partially infrastructure oriented

d. Partially infrastructure less

No, the answer is incorrect.

No, the answer is incorrect.

7) Nested loop in Arduino is: 1 point

a. Loops in the same function

b. Loop inside a Loop

No, the answer is incorrect.

8) A DC motor is a type of : 1 point

2 of 3 Friday 09 November 2018 07:27 AM

No, the answer is incorrect.

9) In SDN-based sensor network, one can manage: 1 point

d. All of the above

No, the answer is incorrect.

10)Which of these is NOT related to IoT scalability? 1 point

a. Flexibility within Internet.

b. Large scale deployment.

c. Real-time connectivity of billions of devices.

d. Range of each sensor node.

No, the answer is incorrect.

Previous Page End

3 of 3 Friday 09 November 2018 07:27 AM

Courses » Introduction to Internet of Things

Announcements Course Ask a Question Progress Mentor FAQ

Lecture 1: a. Cloud-based storage and computing.

Lecture 3: No, the answer is incorrect.

Week 1: b. M2M is a subset of IoT

1 of 3 Friday 09 November 2018 07:27 AM

4) Which one Powered

Download Video No, the answer is incorrect.

5) The protocol IKEv2 stands for: 1 point

a. Information Key Exchange version 2

b. Internet Key Exchange version 2

c. Internet Key Exclusion version 2

d. Inter-Key Exclusion version 2

No, the answer is incorrect.

No, the answer is incorrect.

7) Which of these statements regarding sensors is TRUE? 1 point

a. Sensors are input devices.

b. Sensors can be analog as well as digital

c. Sensors respond to some external stimuli.

No, the answer is incorrect.

8) Light activated polymers (LAPs) are a special type of: 1 point

a. Light dependent resistors

b. Shape memory polymers

2 of 3 Friday 09 November 2018 07:27 AM

No, the answer is incorrect.

d. Data sensing and actuation protocols.

No, the answer is incorrect.

10)A DC motor is a type of : 1 point