Professional Documents
Culture Documents
Profile
Profile
COMPANY
OVERVIEW
E-MAIL ID [email protected]
WORKFORCE 50 PERSON
Industrial recovery is recover and recycle scrap from steel plants and
rolling mills, scrap from the steel processing (new scrap), and scrap from products after their
use (old scrap).
New scrap is generated during the initial manufacturing processes. The composition of new
scrap is well known and in principle new scrap does not need any pre-treatment process before
it is re-melted, although cutting to size might be necessary. Even new scrap with paint or
coating (with the exception of cable which does need treatment prior to input into a furnace)
does not generally need any waste-related pre-treatment before being sent to the furnaces, since
many furnaces can melt such new scrap directly if required.
Old scrap is collected after a use cycle, either separately or mixed, and it is often contaminated
to a certain degree, depending highly on its origin and the collection systems used. Since the
lifetime of many metal products can be longer than 10 years and sometimes longer than 50
years, for instance products for building and construction, there is an accumulation of metal in
use since the beginning of the industry.
Another way to classify scrap sources is according to the products in which the metal was used
before it became a waste. The main iron and steel scrap sources in this sense are vehicles
(including ships and aeroplanes), metal products for construction, machinery, electrical and
electronic equipment and packaging.
Packaging material
Steel packaging includes food cans, beverage cans, aerosols, etc.
The structure of the recycling industry, from collectors until using the scrap in steelworks and
foundries, could be described as a pyramid structure (see Figure. 1).
Suppliers
(Scrap Collectors, Sorting)
Trading Treatment
(dismantling, shredding etc)
Steel Works
We will diligently comply with all applicable safety and health laws and regulations. We will take
measures to prevent work related injuries or illness.
a) An healthy and safe working environment for all employees and contractors staff alike
b) Develop and implement ssafe working practices and to provide training to employees in
this regard.
c) Hold each employee accountable for the achievement of the basic objectives.
Each objective plays an important part of our safety and health program and we expect them to be
committed to these objectives and to report any hazards which may lead to accident or illness.
The application of a sound safety and health practice for the protection of our people is an
essential component in the overall success of preventing illnesses.
GUPTAS INDUSTRIAL RECOVERY strives to continue to develop new and enhanced services
locally & internationally to meet the changing needs of its clients and marketplace.
HEALTH & SAFETY
GUPTAS INDUSTRIAL RECOVERY awares that
health and safety is at the
top of its responsibilities.
All dismantling and sorting process of scrap activities, shall be performed to meet client
requirements, contract specifications, other applicable codes, standards and jurisdictional
regulations. Thus the management is committed to take the following measures:
PRECAUTION ASSENT
REPORT
AGILITY
Capacity to gather and disseminate information
about changes in the environment and respond to
that information quickly and expediently
UNITY RESILIENCE
Work together and trust one another, in The ability to cope with the ups and downs
order to feel safe and comfortable in the and bounce back from challenges
workplace
INTEGRITY EMPATHY
Having strong principles and values, which The ability to perceive and relate to the
demonstrate through conduct in the work thoughts, emotions, or experiences of
environment others.
GUPTAS INDUSTRIAL RECOVERY
SDN. BHD
- Ferrous scrap metal is collected either separately or mixed and is then sorted in the scrap
yard and then sold to scrap treatment plants or is sent directly to a steelworks.
- Once the scrap arrives at the scrap treatment plant, different types of metals are further
separated and prepared for shredding/sizing. Shredding and sizing is often needed for a
further stage of separation. While shredding and cutting, magnetic separation is used to
single out the ferrous metal (carbon steel).
- In the case of stainless steel, larger pieces are collected separately or sorted in the scrap
yard before shredding. Smaller particles of stainless steel are separated by multiple-step
separations. After separation by a magnet (where the magnetic ferrous scrap is separated
out), the non-ferrous metals, stainless steel scrap and non-metal fractions need to be
further separated by using combinations of density and eddy current separations. For
example, fluids may be used with different densities to first single out the light metal and
the heavy fraction and then to separate the heavy fraction by another density separation
system. The final heavy fraction which usually contains mixtures of copper, zinc, lead
and stainless steel should be manually hand-picked or sorted by sensors. At the
steelworks, iron and steel scrap is usually charged directly to the furnaces.
Some more details on the processing are presented below according to the main scrap sources.
End-of-life vehicles
When a passenger car (as the main example for end-of-life vehicles) reaches its end
of life, it is brought to a specific collection point, which in some cases could also be a generic
scrap-treatment plant. ELVs are treated (depolluted) according to a certain procedure guided by
DEPARTMENT OF ENVIRONMENT under MINISTRY OF ENVIRONMENT AND WATER,
MALAYSIA.
ELVs are first decontaminated by removing various fluids and parts. The rest of the car,
including the body, the interior, etc. is fed into a shredder. In the shredding process, magnetic
separation is used to remove the magnetic ferrous fraction, leaving non-ferrous metals and
nonmetallic
materials to pass to further stages, i.e. dense media separation and eddy current
separator, for the segregation of one type of material from another. The separated ferrous part
may contain as much as 98 % metal.
- Compacting - Crushing /
Palletizing
- Plastics
B) NON- MARKETABLE
- Domestic Scraps
COMPANY’S LOGISTICS
- Forklifts x(5)
- 40 ft container x(2)
FACILITIES
- Adequate
open yards, closed
storage and open storage
facilities are fully
available and equipped
with basic amenities.
CONTACT US…
Address : Lot 11901, Batu 8, Jalan Kebun, E-mail Id : [email protected] Telephone No : 03 -5166 1135
Bukit Kemandol , Tlk. Panglima
Garang, 42500 Selangor.