Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    PA 4112-En - 1

    Uploaded by

    ashfaq shaikh
    This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    PA 4112-En - 1

    Uploaded by

    ashfaq shaikh
    23 views2 pages
    This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

    Original Description:

    Original Title

    PA 4112-en_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    23 views2 pages

    PA 4112-En - 1

    Uploaded by

    ashfaq shaikh
    This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Material

    PA 4112

    revision index revision date


    1 3/26/2012 page 1/2

    Physical properties nominal range typical


    values
    Density --- 1.40 g/cm³
    DIN EN ISO 1183-1, 23 °C
    Tensile modulus --- 11500 MPa
    DIN EN ISO 527-1/-2
    stress at break --- 210 MPa
    DIN EN ISO 527-1/-2
    Elongation at break --- 3 %
    DIN EN ISO 527-1/-2
    Flexural strength --- 300 MPa
    ISO 178
    Temperature range to 135°C

    Declarations of conformity
    This overview is purely informative and does not constitute a declaration of conformity. Please refer to the actual
    declaration of conformity (DoC) including the conditions and its validity period.
    Country Part Remark Expires
    Conflict Mineral Free see certificate see DoC
    RoHS conform including EU 2011/65 and EU2015/863 see DoC
    (ROHS III)

    Freudenberg
    Freudenberg FST GmbH
    Technology&Innovation
    Material Compliance
    Telefon: -
    Fax: -
    Email: [email protected]
    Material
    PA 4112

    revision index revision date


    1 3/26/2012 page 2/2

    No ASTM D2000 properties available

    The given values are based on a limited number of tests on standard test pieces (2mm sheets) produced in the laboratory. The data from
    finished parts can deviate from above values depending on the manufactories process and the component geometry.
    The data represents our present empirical values. It is incumbent on the person placing the order to examine whether it is suitable for its
    intended purpose, before using the product. All questions regarding the guarantee of this product are in line with our terms and conditions,
    inasmuch as statutory provisons do not plan for something else.

    Freudenberg
    Freudenberg FST GmbH
    Technology&Innovation
    Material Compliance
    Telefon: -
    Fax: -
    Email: [email protected]

    You might also like