Engine Spec Sheet 3 - 6DWD-235A Rev B2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Engine Model 6DWD- 235A

DWD Series for Diesel Generator application

POWER RATING
Engine Gross Power
Engine Speed Type of Operation
kW PS
Prime Power 186 253
1500 rpm
Standby Power 206 280
Prime Power 195 265
1800 rpm
Standby Power 215 292

- The engine performance is as per ISO 3046. Type of operation is based on ISO 8528.
- Prime power is available for an unlimited number of hours per year in a variable load application.
- The permissible average power output over 24 hours of operation shall not exceed 80% of the prime power rating.
------------------------------------------------------------------------------------------------------------------------------------------------------
Engine Specifications Fuel Consumption Data
( Liter/ Hour )
ㅇ Engine Type In-Line type, 4 strokes, Speed 1500 rpm 1800 rpm
water-cooled Turbocharged Rating Prime Standby Prime Standby
air-to-air intercooled 186 kW 206 kW 195 kW 215 kW
ㅇ Combustion type Direct injection 100% Load 47.5 51.5 51.0 55.5
ㅇ Cylinder Type Wet liner 75% Load 33.0 35.5
ㅇ No. of Cylinders 6 50% Load 24.0 26.0
ㅇ Bore × stroke 126 ×130 mm 25% Load 15.5 16.5
ㅇ Displacement 9.726 liter
ㅇ Compression ratio 16 : 1
ㅇ Firing order 1–5–3–6–2–4 Fuel System
ㅇ Injection timing 14.5 °BTDC ㅇ Injection pump Direct Injection type
ㅇ Dry weight Approx. 980 kg ㅇ Governor Electronic type
ㅇ Dimension(LxWxH) 1772 × 864 × 1220 mm ㅇ Feed pump Mechanical type
ㅇ Rotation Anti-clockwise ㅇ Injection nozzle Multi-hole type
(Face to the flywheel) ㅇ Opening pressure 250 kg/cm2 (3556 psi)
ㅇ Fly wheel housing SAE NO. 1 ㅇ Fuel filter Full Flow, Cartridge type
ㅇ Fly wheel SAE NO.14 ㅇ Used fuel Diesel fuel oil
ㅇ Ring Gear Tooth 160 EA

Mechanism Lubrication System


ㅇ Type Overhead valve ㅇ Lub. Oil Grade CF-4 oil
ㅇ Number of valve Intake 1, exhaust 1 per ㅇ Lub. Oil Pan Capacity 28 liter
Cylinder ㅇ Max. allowable Oil Temp 115 degree C.
ㅇ Valve lashes at cold Intake. 0.3~0.4 mm ㅇ Low pressure warning 200 kPa
Exhaust 0.4~0.5 mm ㅇ Low pressure Shutdown 160 kPa
ㅇ Oil Consumption Rate ≤ 0.82 g/kWh

6DWD-235A Revision B2. Aug. 2019


Cooling System Engineering Data
ㅇ Cooling method Fresh water forced type 1500 rpm 1800 rpm
ㅇ Water Pump Centrifugal, Belt driven ㅇ Media Flow Prime S/B Prime S/B
ㅇ Water capacity 28 liter (engine only) Combustion Air m3/min 15.0 16.6 15.7 17.3
ㅇ Max. Water Temp 99 degree C. Exhaust Gas m3/min 29.5 32.6 31.0 34.1
ㅇ Thermostat Open 71°C / Full 82°C Cooling Fan m3/min 346 346
ㅇ Water in/outlet Dia 45 mm
ㅇ Heat Rejection
to Exhaust kW
to Coolant kW
to Intercooler kW
Intake & Exhaust System to radiation kW
ㅇ Max air restriction Clean 2 kPa / Dirty 5 kPa
ㅇ Exhaust back pressure Max 6 kPa

Electric System Conversion Table


ㅇ Charging generator 28 V × 54 A (1500 W) in. = mm × 0.0394 lb/ft = N.m × 0.737
ㅇ Voltage regulator Build-in type IC regulator PS = kW × 1.3596 U.S. gal = lit. × 0.264
ㅇ Starting motor 24 V ×.7.5 kW psi = kg/cm2 × 14.2233 kW = 0.2388 kcal/sec
ㅇ Battery Voltage 24 V in3 = lit. × 61.02 lb/PS.h = g/kW.h × 0.00162
ㅇ Battery Capacity 200 AH HP= PS x 0.98635 Cfm = m3/min x 35.336
Ib = kg x 2.20462

Engine Layout & Dimension

6DWD-235A Revision B2. Aug. 2019

You might also like