HCF22 PDF
HCF22 PDF
HCF22 PDF
DELIVERY
The HCF 22 room temperature sensor is supplied with two
batteries (type LR6, AA or AM3).
PLEASE NOTE
The radio transmission of the HCF 22 may be disrupted
by interference from metal objects in the building (metal
cabinets and doors, mirrors, radio transmitters or
concrete ceilings and iron grills).
− Establish and check radio communication of the
HCF 22 as to interference (see Start-up).
− If interference occurs, select alternative location for
installation.
START-UP
1. Remove cover of housing of the room temperature sensor
as shown in Figure 2.
Red LED
Transmission
button
INSTALLATION
1. Remove batteries again.
2. Mark drill holes according to drilling template.
CHANGING BATTERIES
Change batteries when the red LED of the room temperature
sensor blinks.
1. Remove housing cover of the room temperature sensor (see
Figure 2).
2. Insert 2 new batteries (type LR6, AA or AM3) of 1.5 Volt
each (see Figure 3).
3. Return cover to housing by placing top edge against back
plate and snap lower part of cover onto housing (see
Figure 5).
Home and Building Control Products
Honeywell AG
Böblinger Strasse 17
D-71101 Schönaich
Phone: (49) 7031 637 01
Fax: (49) 7031 637 493
http://europe.hbc.honeywell.com
EN1H-0137 GE51R1099