MST Tooling System Vol 3 - Catalog

Individuality and creation
Since its inauguration in 1937, MST has been developing new products with forward-looking creativity.
We have a basic philosophy of "Personality and Creation", and we pursue of originality and try to improve
brand value as we strive to meet the needs of our customers.
■ Fusing humans and machines　　　

The finishing process is carried out by skilled technicians.
Unmanned factory utilizes and automatic guided vehicle system.
By fusing the automated machining proceses and by-hand processes at a high level, we are aiming to
produce even higher quality products.
A new challenge
By making the most of our accumulated knowledge and experience, we are developing new
processing technologies and providing new service.
■ Graphite Machining
Thailand factory
We make graphite elec-

trodes to your specifica-
tions. State-of-the-art facili-
ties and production systems
offer our customers quick
delivery and large-volume
order fulfillment.
■ Micromachining
SLIMLINE UNO finishing process
We meet our customers'

needs using micron-pre-
cision process technology
which have been cultivated
throughout history.
RELIABLE TOOLING
MST's tooling is subject to its own MST's 4 accuracy standards:
taper contact, roundness, surface roughness and heat treatment.
These are more precise than JIS or MAS standards. We provide
trustworthy products under strict quality control.
● MST’s 4 accuracy standards.
1 Taper contact % 90
2 Roundness μm 0.8
3 Surface roughness (Rmax) μm 0.6
4 Heat treatment Material SCM415
Carburized depth mm 0.8 ∼1.0
Hardness HRC 55°± 2°
1
SLIMLINE contributes to the improvement of machining accuracy and cost reduction in 5-axis ma-
chining, micro-precision machining, and heavy duty applications.
If you would like more detailed

information, please contact
MST and ask for a copy of our
specialty catalog.
The shrink-fit Short cutter life.

Small tools
break soon.
holder provides the
perfect solution.
A simple chucking mecha-
nisem without any parts.
・Stable gripping.
Gripping force : 3 times.
・No gaps.
・No parts. Cutter run-out The end mill
・Does not fall off even adjustment is slips or falls off.
if vibrated. troublesome.
Super-slim shape
・Allows the holder to enter a
workpiece. Can be used with a
standard tool.
The workpiece is ruined.
The applicable The coolant

tools are special. leaks.
Long
Short
High accuracy
・Twice the tool life.
・Slim tools are also no problem.
・Anyone can use them...
2
Master Index
ANGLE HEAD HALF 6
STANDARD TYPE 14
DETa-1 Collet Holder 22
Collet Holder 32
Hi-ART milling chuck 40
M/C Tool
SUMMIT 43
FMH RIGID type 46
RED SCREW arbor 48

Cutter arbor with
55
spindle-through coolant
MICRO HEAD 58
Retention knob 67
SET SCREW HOLDER

70
FOR ROUND SHANK
HSK-T Tooling Systems INSERT HOLDERS
72
for Turning Mill FOR SQUARE-SHANK
Universal Facing
75
Boring Head
General Purpose Tool SMART GRIP 77
GOO CHECKER 88
Centering bar 90
TOOL SET UP STATION

6S DESK
JIG 92
TOOL SET UP STATION
CLEAN box
TEST BAR CHECKMATE 96
TOOL CAP 97
Tool set up stand 100

Measuring Equipment
Palette 102
TOOL HOLDER
103
STORING CABINET
ENDMILL HOUSE 104
Maintenance Tool MIDDLE VISE 105
WIRE CUT UNIT 107
PARTS 109
Angle head HALF

111
PARTS LIST
Wire EDM fixture Technical support 120
JIG Tool Instructions for use 121
For high-speed
124
spindle rotation
HSK Shank 125

Technical Information
Technical data 126
OVERSEAS NETWORK 132
3
High-accuracy, and
for
High-efficiency machining
5 Points End-mill Small size drill
1 The shortest 3 Quality
Machining
quality
and speed
Tool holder Length becomes 2 times Replace!

Down
Cutting tool
Deflection becomes 8 times
Do not use worn cutting tools.
Use shrink-fit holders 4 Cleanliness

ip!
with a slim-t Cutting chips and oil are
As short as possible
Deflection amount is proportional to projection length3. your main
enemies.
2 Selection Use a tool holder washing machine,
CLEAN BOX!
Stronger than collet holders
Clamping force 3times Clean your tool holders and cutting tools.
Run-out accuracy within 3microns 5 Accuracy
Check
the spindle condition
Use shrink-fit holders Use a test bar for dedicated
rce machine spindle maintenance,
clamping fo
with strong cy !
cu ra
and high ac CHECKMATE!
Choose a tool holder that can clamp a cut- Machine spindle run-out accuracy
ting tool securely and with high accuracy. should be within 10 microns (.0004”).
The shrink fit holder with the slim design, Tool holder Test bar
superior gripping force and run-out accuracy. washing machine
Ideal for easy machine

spindle run-out accuracy
checks.
P. 96
MST and ask for a copy of our
specialty catalog.
Thickness
3μm (.0001”) 1.5mm (.06”)

Washes tool holders, collets, nuts
and cutting tools thoroughly to
maintain their high accuracy
P.94
4
You can carry out 5-surface machining, such as side face and inside
surface, without needing to change the positioning of the work-piece.
Side face Internal Diagonal End-face machining
machining machining 斜め加工
machining of a long work-piece
Voluminous variety
■ New concept Angle head HALF for drilling and tapping applications Lightweight • Shorter delivery • Affordable !
Intended Chucking MAX. min-1
Type Angle CODE ATC
purpose range (φD) Main spindle(CCW)：Angle shaft
（CW）
(Typical holder)
5600：5000
90°type HFCS6 φ3, 4, 6 FCS6
［1 : 0.88］ 1.8
6000：6000
P. 8 HFD 7 φ1 〜 7 D 7 ［1(CCW)：1(CW)］
Drill 4000：4000
HFD12 φ2.5 〜 13 D12 ［1(CCW)：1(CW)］ 2.9
Endmill
6000：6000
HFA10 φ2.4 〜 10 C10 ［1(CCW)：1(CW)］ 1.8
6000：5000
90° HFA20 φ5.8 〜 20 C20 ［1(CCW)：0.83(CW)］ ○ 4.4
5600：5000
HFCS6 M4, 5, 6 FCS6
［1 : 0.88］ 1.8
6000：6000
HFT 4 M2 〜 8 TA4 ［1(CCW)：1(CW)］ 2.3
Tap 4000：4000
mini type HFT 6 M3 〜 12 TA6 2.9
［1(CCW)：1(CW)］
P. 12
6000：5000
HFT12 M3 〜 16 TA6/12 ［1(CCW)：0.83(CW)］ 4.4
6250(7200)：3000(4000)
UNIVERSAL type HUD 7 φ1 〜 7 D 7 ［1(CCW)：0.48(CW)］ 1.8
(Free setting of cutting
Drill
0° HUA10 Endmill φ2.4 〜 10 C10 6300：3000 3.9
〜
directions) ［1(CW)：0.48(CW)］
HUA20 φ5.8 〜 20 C20 ○ 4.8
P. 10
120° HUT 4 M2 〜 8 TA4 6250(7200)：3000(4000)
3.8
［1(CCW)：0.48(CW)］
Tap 6300：4000
HUT 6 M3 〜 12 TA6 ［1(CW)：0.48(CW)］ 4.8
■ High-rigidity STANDARD type for end-milling applications (※Use the BT30 tooling system with the Quick Change system.)
AHB 5 φ0.5〜 5 ER8 5.5
MODULAR type Drill
(Recombination 90° AHB 7 φ0.5〜 7 ESX12 5.3
Endmill 6000：6000
type) AHB10 φ2.4〜10 C10 ［1(CCW)：1(CW)］ ○ 6.2
P. 15
Drill
45° AHC10
Endmill
3000：2430
SOLID type AHA20 φ5.8〜20 C20 ［1(CCW)：0.81(CW)］ 7.3
Drill
P. 16 90° AHA25 φ5.8〜25 C25 ○ 13.6
Endmill 2500：2400
［1(CCW)：0.96(CW)］
AHD30 BT30※ BT30 14.7
3000：2430
FLANGE type AHA20 φ5.8〜20 C20 ［1(CCW)：0.81(CW)］ 18.0
(Mounting directly Drill
90° AHA25 φ5.8〜25 C25 × 18.5
on machine spindle) Endmill 2500：2400
［1(CCW)：0.96(CW)］
P. 17 AHD30 BT30※ BT30 19.6
3000：4500
UNIVERSAL type 0° AHU10 φ2.4〜10 C10 9.6
〜
Drill ［1(CW)：1.5(CW)］
(Free setting of cutting ○
90° AHU20 Endmill φ5.8〜20 C20 3000：3000
15.8
directions) P. 18 ［1(CW)：1(CW)］
Custom-made products Extra long type

48
800 Slim and extended type

Twin cut type Parallel Head
5
ANGLE HEAD
Drilling and tapping account for 80% of angle head operation.

The Angle head HALF was redesigned to achieve the necessary
rigidity and accuracy, while reducing its weight by 50% and delivery
time in half at an affordable price.
M/C Tool
Speedy Light- Repair it

Affordable weight Compact
2,300USD～ Shorter
φ36~
yourself
delivery kg~
HSK-T Tooling Systems
for Turning Mill
General Purpose
BT30/40/50
9 0 ° U NIV ER SAL type
Tool
BT30/40/50 BT30/40/50
type HSK-A63
DIN40/50, DIN40/50
type DIN40/50
CAT.40/50 Angle can be set CAT.40/50 Extra-compact CAT.40/50
arbitrarily head
HFD / HFA
φ1~20 HUD / HUA HFCS
HFT φ1~20 φ3,4,6
M2~16 HUT 120° 120° M 4,5,6
JIG
M2~12 φ36
15.5
31.5
Equipment
Measuring
Compact d esign 　　 Auto Tool Changer ( A. T. C) is Easy installation

av ailab le on B T3 0 machine. The positioning pin allows an in-use position-
ing block to be used is now a standard feature.
Maintenance Tool
Can be used with a variety of machining centers.

B
Positioning b lock
For the straight pin For the taper pin
Q
A
Wire EDM fixture
Type CODE Q A B
JIG Tool
HF D 7 72 68 38
HF D1 2 98 93 58
HF T 4 75 73 38 Adjustable
pin height
90° HF T 6 97 92 58
Type HF A1 0 90 87 38
B T3 0
Information
HF A2 0 119 111 64 1 .8 k g
Technical
Straight pin Taper pin

97 96
HF T1 2 64 Positioning pin
116 115
miniType HF CS6 36 31.5 31
6
Easy disassembly and assembly Easy to reassemble
ANGLE HEAD
●The number of parts (22 pcs.) is half that of Shaft Drill Tap
conventional angle heads.
●No need for fine matching and adjustment.
●Makes use of commercial items such as Exchange
bearings. Affordable and readily available.
●An informative video and an instruction manual
for disassembly and reassembly are provided. Angle shaft Angle shaft
(For drilling) (For tapping)
Shank
M/C Tool
Exchange
Running cost is reduced by 90% as a result of reduced

repair costs and machine down time.
Positioning block and positioning pin

Groove with
Straight hole Groove Taper hole chamfer
S
for Turning Mill

Positioning block
Positioning block
Positioning pin
Stationary bracket Straight pin Expansion pin Taper pin
●Mainly for ●The gap between 10° ●The spring
Positioning pin drilling and the positioning block force presses
General Purpose
tapping use. and pin has been the pin into the
●Coolant can eliminated to ensure taper hole.
Coolant supply be supplied. tighter engagement.
●ATC is not applicable.
Tool
Straight pin
PT1/8
Adjustable pin height
Stationary bracket
LOC-LINE ●
S dimension can be changed by
(LOC6)
reassembling the stationary bracket.
S
●
The positioning pin can be easily
adjusted in length and replaced. ( 50, 60, 65
) Change
JIG
80, 85, 110
Semi-finished Positioning block for machines

positioning block FANUC
● BROTHER
●
CODE ROBODRILL CODE SPEEDIO CODE NOTE

α-DiA series Tapping center
HB-01 ABF005 ABF213 S300X1 / S500X1 / S700X1
Equipment
Measuring
ABF259 S1000X1
28 45 ABF176 TCーS2, S2A※, S2B, S2C, S2D, R2B※
(14) 7
40〜45
HRC
30 ■Caution
60 30 18 +0.03 S45C MAZAK
●
+0.01
●TC-S2A* (Tapping center),The user needs to confirm whether the positioning Maintenance Tool
SUPER VELOCITY CENTER block can be mounted on the machine (spindle surface) or not.Please contact us.
9 2000L / 120-II 2000L / 200-II ●TC-R2B* (Tapping center) machining area is limited to some extent due to
■Note interference between the positioning block and the internal part cover of the
●Please confirm with the machine machine. For more information, please contact us.
tool manufacturer about the
dimensions of the positioning block. ■A product code example when ordering Angle Head HALF.
●We have a semi-finished ●FANUC ●BROTHER
positioning block with a taper hole BT30ーHFD7ー122ー S65 BT30ーHFD7Lー120ー S50C
available. (→P.19) ● Available from Yamazaki Mazak Corp.
Wire EDM fixture
Kit Package
JIG Tool
CODE
●
Learning Kit to understand gear and bearing mechanism. Contents of kit BT40-HF12-LK BT50-HF12-LK
●
There are only 22 parts and anyone can assemble them Complete unit BT40ーHFD12ー180ーS65 (1pc.) BT50ーHFD12ー195ーS80 (1pc.)
in about 10 min.
Angle shaft(For tapping) FRーT6 (1pc.)
●
Spare/consumable parts and assembly tools are included.
Tap sleeve TA6ー3, 4, 5, 6, 8 (each1pc.)
Information
DETa-1 Collet D12ー4, 6, 8, 10, 12, 13 (each 1pc.)

Technical
Positioning pin HPー50T(1pc.) HPー62T(1pc.)

Spare bearing 7005ADB (1set), 6805 (1pc.), 51106 (1pc.)
7
HALF 9 0 °
ANGLE HEAD
type
Drill・End mill Tap
Fig. 1 6,000 min -1 Fig. 3 6,000 min -1 Fig. 5 6,000 min -1
CCW CCW CCW
HFD7 HFA10 HFT4
( )…HFD7L ( )…HFT4L
55 60
60 L ( 55 ) L
( 55 ) L φD=2.4~10 φD=M2~M8
φD=1~7
46 M 42 ( 46 ) M
42 ( 46 ) M
CW CW CW
6,000 min -1
M/C Tool
6,000 min -1 6,000 min -1
19 19 19
8 1.5
38 38 38
φ72 φ75
φ90
32 36 50 36 38 35
68 86 73
Fig. 2 4,000 min -1 Fig. 4 6,000 min -1 Fig. 6 4,000 min -1

for Turning Mill
CCW CCW CCW

HFD12 60
HFA20 78
HFT6
60
L 62 L L
M M M
CW CW CW
4,000 min -1 5,000 min -1 4,000 min -1
29 32 29
φD=2.5~13 φD=5.8~20 φD=M3~M12
General Purpose
10 3
Tool
58 58
64
φ98 φ97
45 48 φ119 47 45
60 51
93 92
111
Fig. 7 6,000 min -1
CCW
Cutting data HFT12
JIG
P. 13 78
62 L
CW M
BT40ーHFA20ー135
Parts list 5,000 min -1
P. 111 BT40ーHFD12ー120 32
φD=M3~M16
BT30ーHFD7ー122
8 3
Equipment
Measuring
DETa-1 Collet Tap sleev e 64

H1
(Max insertion length) H φ 97 ( M3 〜M12 )
H 42 ( M 3〜M12 ) φ116 ( M14〜M16 )
(Clamping length) 61 ( M14〜M16 ) 54
D D1
Maintenance Tool
96(M3 〜M12)
D D1 L 115(M14〜M16)
L
CODE φD φD1 L H H1
Holder
type
CODE φD L φD1 H
Holder
type
Spring collet
D 7ー 1.5 1 〜 1.5 17 50 7 36 HFD 7 TA 4ーM 2 M 2 67.5 16 19 HFT 4 H
(Clamping length)
ー 2 1.5 〜 2 10 HUD 7 ーM 3 M 3 20 HUT 4
ー 2.5 2 〜 2.5 12 ーM 4 M 4 21
ーM 5 M 5 D D1
Wire EDM fixture
ー 3 2.5 〜 3
ー 4 3 〜 4 14 ーM 6 M 6
L
JIG Tool
ーM 8 M 8
ー 5 4 〜 5 16
TA 6ーM 3 M 3 92 19 21 HFT 6 Holder
ー 6 5 〜 6 CODE φD φD1 L H
ーM 4 M 4 22 HUT 6 type
ー 7 6 〜 7
ーM 5 M 5 HFT12 C10ーD 2.6 2.8 3 ... 17.2 26 16 (φD=2.6〜5) HFA10
D12ー 4 2.5 〜 4 26 70 16 50 HFD12 ーM 6 M 6 (0.2Steps） Except for HUA10
ー 6 4 〜 6 20 ーM 8 M 8 23 ... 9.6 9.8 10 18 ※3, 4
ー 8 6 〜 8 22 ーM10 M10 (φD=3, 4,
ー10 8 〜 10 ーM12 M12 24 20 5.2〜5.8)
Information
ー12 10 〜 12
Technical
TA12ーM14 M14 111.5 25 33 HFT12 (φD=6 〜10 )

ー13 11 〜 13 ーM16 M16 35 C20ーD 6 6.2 6.4 ... 29.5 50 32 (φD=6〜9.8) HFA20
■Note (0.2Steps） 35 (φD=10〜15.8) HUA20
●Above products meet JIS standards. We can produce ... 19.8 20 40 (φD=16〜20)
other standard Tap sleeves, such as ANSI, ISO, DIN
and others. For more information, please contact us. φD
Ex. C10-6
8
ANGLE HEAD
CODE Fig. φD L M CODE Fig. φD L M
BT30ーHFD 7 ー122 1 1 〜 7 122 70 2.3 DN40AーHFD 7ー135 1 1 〜　 7 135 70 3.1

ー182 182 130 3.0 ー195 195 130 3.4
ーHFD 7Lー120 120 57 1.8 ーHFD12ー135 2 2.5〜　13 135 70 3.7
ーHFD12 ー122 2 2.5 〜 13 122 70 2.9 ー195 195 130 5.0
ーHFA10 ー120 3 2.4 〜 10 120 65 1.8 ーHFA20ー150 4 5.8〜　20 150 77 4.7
DIN
ーHFT 4 ー122 5 M2 〜 M 8 122 70 2.3 ー210 210 137 5.8
ー182 182 130 3.0 ーHFT 4ー135 5 M2〜M 8 135 70 3.1

ー195 195 130 3.4
ーHFT 4Lー120 120 57 1.8
ーHFT 6ー135 6 M3〜M12 135 70 3.7
ーHFT 6 ー122 6 M3 〜 M12 122 70 2.9
ー195 195 130 5.0
M/C Tool
BT40ーHFD 7 ー120 1 1 〜 7 120 70 3.0
ーHFT12ー150 7 M3〜M16 150 77 4.7
ー180 180 130 3.3
ー210 210 137 5.8
ーHFD12 ー120 2 2.5 〜 13 120 70 3.6
DN50AーHFD 7ー195 1 1 〜　 7 195 130 5.9
ー180 180 130 4.9 ー255 255 190 6.3
ーHFA20 ー135 4 5.8 〜 20 135 77 4.4 ーHFD12ー135 2 2.5〜　13 135 70 5.8
ー195 195 137 5.6 ー195 195 130 7.1
ーHFT 4 ー120 5 M2 〜 M 8 120 70 3.0 ー255 255 190 8.4

ー180 180 130 3.3 ーHFA20ー150 4 5.8〜　20 150 77 6.6
for Turning Mill

ーHFT 6 ー120 6 M3 〜 M12 120 70 3.6 DIN ー210 210 137 7.8
ー180 180 130 4.9 ー270 270 197 8.9
ーHFT12 ー135 7 M3 〜 M16 135 77 4.4 ーHFT 4ー195 5 M2〜M 8 195 130 5.9
ー195 195 137 5.6 ー255 255 190 6.3
BT50ーHFD 7 ー195 1 1 〜 7 195 130 6.4 ーHFT 6ー135 6 M3〜M12 135 70 5.8
ー255 255 190 6.8 ー195 195 130 7.1
ー255
General Purpose
255 190 8.4
ーHFD12 ー135 2 2.5 〜 13 135 70 6.3
ーHFT12ー150 7 M3〜M16 150 77 6.6
ー195 195 130 7.6
Tool
ー210 210 137 7.8
ー255 255 190 8.9
ー270 270 197 8.9
ーHFA20 ー150 4 5.8 〜 20 150 77 7.1
CT40　ーHFD 7ー135 1 0.4"〜.28" 5.31” 2.75” 6.8
ー210 210 137 8.3
ー195 7.68” 5.11” 7.5
ー270 270 197 9.4 ーHFD12ー135 2 2.5〜　13 5.31” 2.75” 8.2
ーHFT 4 ー195 5 M2 〜 M 8 195 130 6.4 ー195 7.68” 5.11” 11.0
ー255 255 190 6.8 T . ーHFA20ー150 4 .23"〜 .79" 5.91" 3.03" 10.4
CA
JIG
ーHFT 6 ー135 6 M3 〜 M12 135 70 6.3 ー210 8.27" 5.39" 12.9
ー195 195 130 7.6 ーHFT 4ー135 5 M2〜M 8 5.31” 2.75” 6.8
ー255 255 190 8.9 ー195 7.68” 5.11” 7.5
ーHFT12 ー150 7 M3 〜 M16 150 77 7.1 ーHFT 6ー135 6 M3〜M12 5.31” 2.75” 8.2
ー210 210 137 8.3 ー195 7.68” 5.11” 11.0
Equipment
Measuring
ー270 270 197 9.4 ーHFT12ー150 7 ♯4" 〜 5/8" 5.91" 3.03" 10.4
A63 ーHFD 7 ー183 1 1 〜 7 183 130 3.5 ー210 8.27" 5.39" 12.9
ー243 243 190 3.9 CT50　ーHFD 7ー195 1 0.4"〜.28" 7.68” 5.11” 13.0
ーHFD12 ー123 2 2.5 〜 13 123 70 3.3 ー255 10.04” 7.47” 13.8
ーHFD12ー135 2 .10”〜 .51” 5.31” 2.75” 12.8
ー183 183 130 4.7
ー195 7.68” 5.11” 15.6
Maintenance Tool
ー243 243 190 6.0
ー255 10.04” 7.47” 18.5
ーHFA20 ー198 4 5.8 〜 20 198 137 5.4
ーHFA20ー150 4 .23"〜 .79" 5.91" 3.03" 14.7
ー258 258 197 6.5
ー210 8.27" 5.39" 17.3
ーHFT 4 ー183 5 M2 〜 M 8 183 130 3.5 T. ー270 10.63" 7.76" 19.8
CA
ー243 243 190 3.9 ーHFT 4ー195 5 M2〜M 8 7.68” 5.11” 13.0
ーHFT 6 ー123 6 M3 〜 M12 123 70 3.3 ー255 10.04” 7.47” 13.8
ー183 183 130 4.7 ーHFT 6ー135
Wire EDM fixture
6 M3〜M12 5.31” 2.75” 12.8

ー243 243 190 6.0 ー195 7.68” 5.39" 15.6
JIG Tool
ーHFT12 ー198 7 M3 〜 M16 198 137 5.4 ー255 10.04” 7.47” 18.5
ー258 258 197 6.5 ーHFT12ー150 7 ♯4" 〜 5/8" 5.91" 3.03" 14.7
■ A product code example when ordering. ー210 8.27" 5.39" 17.3
ー270 10.63" 7.76" 19.8
B T4 0 -HF D7 -1 2 0 - S 6 5 ■O ption
●DETa-1 Collet (HFD) ●Spring collet (HFA) ●Tap sleeve (HFT)
Information
Technical
●Retention knob→P.67 ●Tools for assembly

Positioning pin type ■Std . Access.
Dimension S
S :Straight pin ●Coolant duct (HSK-A) ●Fixing spanner(Except for HFA10/HFT4L) ●Hexagonal wrench set
W :Expansion pin 50, 60, 65, ●Spanner(HFA) ●Single-ended wrench (HFD7L/HFA10) ●Spanner(HFA)
T :Taper pin 80, 85, 110 … ■Note
●Other shanks are also available upon request.
9
HALF U NIV ER SAL type
ANGLE HEAD
Drill・End mill Tap
Fig. 1 Fig. 2 Fig. 4 6,250 min -1

6,250 min -1 (7,200 min -1)
(7,200 min -1) 6,300 min -1
HU D7 CCW
HU A1 0 CCW HU T4 CCW
( )…BT30 ( )…BT30
φD=1~7 C C
φD=2.4~10 L C
L �� φD=M2~M8 L
M
��
M CW M
M/C Tool
CW CW
3,000 min -1 3,000 min -1 3,000 min -1
(4,000 min -1) 36 (4,000 min -1) 36
44
(32) (32)
E E
�� E
120°〜0° 0°〜-120° 120°〜0° 0°〜-120° 120°〜0° 0°〜-120°
39 42.2 3.5 43 42.5

(30) (45) 59.2 40.5 (1.5) (32) (48)
8 1.5
for Turning Mill
18 18
24 (17) 18 24.5 (17)
32
(25.4) 28 (25.4) 28
28
(35) (35)
30 30
(23) 30
(23)
φ123 φ123
φ123 30 30 30 30 30 30 (120)
(φ120) (26.1)(26.1) (26.1) (26.1)
General Purpose
CCW
Tool
Fig. 3 6,300 min -1 Fig. 5 6,300 min -1

HU A2 0 CCW HU T6 CCW
C C
φD=5.8~20 L φD=M3~M12 L
CW M M
CW
3,000 min -1 4,000 min -1
44 44
JIG
E E
120°〜0° 0°〜-120° 120°〜0° 0°〜-120°
70 49 57 43
BT40ーHUA20ー135
8 3
Equipment
Measuring
25 25
50 36.8
40 40
31 φ150 31 φ150
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
10
※
Moment
ANGLE HEAD
CODE Fig. φD L M φC φE kgf・mm
BT30 ーHUD 7ー102 1 1 〜　 7 102 39 46 64 1.8 116

ーHUT 4ー102 4 M2 〜 M 8
BT40 ーHUD 7ー135 1 1 〜　 7 135 85 60 72 3.8 251
ーHUA10ー135 2 2.4 〜 10 3.9 268
ーHUA20ー135 3 5.8 〜 20 77 78 88 4.8 392
ーHUT 4ー135 4 M2 〜 M 8 85 60 72 3.8 251
ーHUT 6ー135 5 M3 〜 M12 77 78 88 4.8 392
M/C Tool
BT50 ーHUD 7ー150 1 1 〜　 7 150 85 60 72 6.6 277
ーHUA10ー150 2 2.4 〜 10 6.7 295
ーHUA20ー150 3 5.8 〜 20 77 78 88 7.5 440
ーHUT 4ー150 4 M2 〜 M 8 85 60 72 6.6 277
ーHUT 6ー150 5 M3 〜 M12 77 78 88 7.5 440
DN40AーHUD 7ー150 1 1 〜　 7 150 85 60 72 3.8 251

ーHUA10ー150 2 2.4 〜 10 268
for Turning Mill

DIN ーHUA20ー150 3 5.8 〜 20 77 78 88 5.0 392
ーHUT 4ー150 4 M2 〜 M 8 85 60 72
ーHUT 6ー150 5 M3 〜 M12 77 78 88
DN50AーHUD 7ー150 1 1 〜　 7 150 85 60 72 6.6 277
ーHUA10ー150 2 2.4 〜 10 6.7 295
General Purpose
DIN ーHUA20ー150 3 5.8 〜 20 77 78 88 7.0 440
Tool
ーHUT 4ー150 4 M2 〜 M 8 85 60 72 6.6 277
ーHUT 6ー150 5 M3 〜 M12 77 78 88 7.0 440
CT40　ーHUD 7ー150 1 .04 〜 .28 5.91" 3.3" 2.4" 2.8" 8.4 251
ーHUA10ー150 2 .09 〜 .39 3.3" 2.4" 2.8" 8.6 268
CA
T. ーHUA20ー150 3 .23 〜 .79 3.0" 3.1" 3.5" 11.0 392
JIG
ーHUT 4ー150 4 M2 〜 M 8 3.3" 2.4" 2.8" 8.4 251
ーHUT 6ー150 5 ♯4 〜 1/2 3.0" 3.1" 3.5" 11.0 392
CT50　ーHUD 7ー150 1 .04 〜 .28 5.91" 3.3" 2.4" 2.8" 14.6 277
ーHUA10ー150 2 .09 〜 .39 3.3" 2.4" 2.8" 14.8 295
Equipment
Measuring
T. ーHUA20ー150 3 .23 〜 .79 3.0" 3.1" 3.5" 15.4 440
CA
ーHUT 4ー150 4 M2 〜 M 8 3.3" 2.4" 2.8" 14.6 277
ーHUT 6ー150 5 ♯4 〜 1/2 3.0" 3.1" 3.5" 15.4 440
※Distance from a gage line to center of gravity × weight (kg・mm)
■O ption
Maintenance Tool
●DETa-1 Collet (HUD)→P.8 ●Spring collet (HUA)→P.8 Cutting data
●Tap sleeve (HUT)→P.8 ●Retention knob→P.67 ●Tools for assembly P. 13
■Std . Access.
●Fixing spanner ●Hexagonal wrench set ●Spanner (HUA)
■Note Parts list
●Other shanks such as HSK are also available upon request. P. 111
■A product code example when ordering.

Wire EDM fixture
B T5 0 -HU A2 0 -1 5 0 - S 6 5
JIG Tool
Positioning pin type

Dimension S
S : Straight pin
W : Expansion pin 50, 60, 65,
T : Taper pin 80, 85, 110 …
Information
Technical
11
HALF mini type
ANGLE HEAD
N 670 min
5,600 min -1
CCW Cutter mounts in tw o d irections V
F 80 mm
25.5 m / m
A cutting tool can be mounted both ways,

inward or outward, by reassembling the
angle shaft.
Inward Outward
CW
L
M
Inward Outward
M/C Tool
CW L1 Allows maximum tool Minimal interfer-

CW
5,000min -1 holder diameter limita- ence with face
15.5 tion even when using of workpiece.
BT40ーHFCS6ー205
31.5 a long cutting tool.
φD= 3, 4, 6
M4, 5, 6
Collet exchange system
φ36
Shaft exchange
31 system for Shrink-

for Turning Mill
SHRINK-FIT
fit collet for COLLET
carbide cutter
(end-mill, drill) or
Tap collet
Tap collet for Tap.
CODE φD L L1 M
General Purpose
BT30　ーHFCS6ー155 155 50 100 1.8 ■O ption

Tool
Drill Endmill ●Shrink-fit collet ●Tap collet

BT40　ーHFCS6ー160 φ3, 4, 6 160 50 110 2.8 ●Retention knob→P.67 ●Tools for assembly
　ー205 205 95 155 3.0 ■Std . Access.

●Fixing spanner ●Hexagonal wrench set
Tap
BT50　ーHFCS6ー175 M4, 5, 6
175 50 110 5.6 ■Note
　ー220 220 95 155 5.8 ●When shipping, the head direction is inward.
The tool for assembly (pliers for retaining ring)
DN40AーHFCS6ー175 Drill Endmill 175 50 110 3.0 is required to reassemble the collet to allow for
N ー220 φ3, 4, 6 220 95 155 3.2 outward positioning of the cutting tool.
DI ●Other shanks such as HSK are also available upon
JIG
DN50AーHFCS6ー175 Tap 175 50 110 5.1 request.

■Caution
ー220 M4, 5, 6 220 95 155 5.3
●The angle axis rotating direction is different due to
CT40　ーHFCS6ー175 Drill Endmill 6.89" 1.97" 4.33" 6.61 its mounting direction, inward and outward.
T. 　ー220 φ3, 4, 6 8.66" 3.74" 6.10" 7.28

CA
CT50　ーHFCS6ー175 Tap 6.89" 1.97" 4.33" 11.24
Equipment
Measuring
　ー220 M4, 5, 6 8.66" 3.74" 6.10" 11.68
Shrink -F it Collet Tap collet ■A product code example when ordering.

φ14 φ14
3
B T3 0 -HF CS6 -1 5 5 - S 6 5
Maintenance Tool
Positioning pin type

22.5 D 33 D
S : Straight pin
■Caution ■Note W : Expansion pin
CODE φD Holding ●The dedicated shrink- CODE φD Holding T : Taper pin
length length ●Tap collets meet JIS
fit collet for the Angle standards. W e c a n
FCS6ー 3 3 11〜13 Head Half, Mini. FCS6ーM4 M4 16
produce ANSI
ー4 4 ●A shrink-fit heating ーM5 M5 standard tap collet. Dimension S
device is required to
ー6 6 12〜13 ーM6 M6 For more information,
50, 60, 65,
inser t and remove
Wire EDM fixture
please contact us.

cutting tools. 80, 85, 110 …
JIG Tool
■Proced ure of cutter insertion to shrink -fit collet

Carbide cutter
Shrink-fit Heater (HRB-01)
Cutter Stopper 1.Attach the shrink-fit collet to the
adapter(ADH-SLK).
2.Heat the shrink-fit collet with the Cutting data
Shrink-fit collet shrink-fit heater. P. 13
3. Attach a stopper to the carbide cut-
Information
Adapter
Technical
ter. After finishing heating, insert

(ADH-SLK)
the cutter to the shrink-fit collet.
4.Cool the shrink-fit collet with the Parts list
shrink-fit heater. P. 111
12
Cutting d ata Angle head HALF
ANGLE HEAD
n-1
m / min
min 9 0 ° type
S55C φ1 2 Drill S55C M1 2 Tap S50C M6 Tap S55C φ1 0 End mill S50C φ2 0 End mill
2 -flutes 2 -flutes
N 670 min-1 N 184 min-1 N 60 min-1 N 350 min-1 N 158 min-1
F80 mm / min F 322 mm / min F 120 mm / min F 50 mm / min F 32 mm / min
V 25.5 m / min V 7 m / min V 3 m / min V 11 m / min V 10 m / min
f 0.12 mm / rev fz 0.07 mm / t fz 0.10 mm / t
M12 M16 2
2
10 20
18 20 10
M/C Tool
B T4 0 -HF D1 2 -1 2 0 B T4 0 -HF T6 -1 2 0 B T4 0 -HF T1 2 -1 3 5 B T4 0 -HF D1 2 -1 2 0 B T4 0 -HF A2 0 -1 3 5
U NIV ER SAL type

S50C φ1 0 End mill S50C M8 Tap S50C M1 2 Tap SUS304 φ1 0 Drill S50C φ1 6 End mill
2 -flutes 2 -flutes
N 900 min-1 N 250 min-1 N 184 min-1 N 314 min-1 N 140 min-1
F 100 mm / min F 312 mm / min F 322 mm / min F 16 mm / min F 40 mm / min
V 28 m / min V 6.3 m / min V 7 m / min V 9.9 m / min V 7 m / min

fz 0.06 mm / t 60°
f 0.05 mm / rev fz 0.14 mm / t
for Turning Mill

45°
M12 1
5 12 16
20 30
B T5 0 -HU A1 0 -1 5 0 B T4 0 -HU T4 -1 3 5 B T4 0 -HU T6 -1 3 5 B T5 0 -HU A1 0 -1 5 0 B T4 0 -HU A2 0 -1 3 5
General Purpose
mini type
Tool
S50C φ6 S50C φ6 A7075 φ6
Carb id e Carb id e Carb id e
N 5000 min-1 N 3500 min-1 N 5000 min-1
d rill end mill end mill
F 250 mm / min F 210 mm / min F 300 mm / min
2 -flutes 2 -flutes
V 94 m / min V 66 m / min V 94 m / min
f 0.05 mm / rev fz 0.03 mm / t fz 0.03 mm / t
6 6
18 1 1.5
JIG
B T3 0 -HF CS6 -1 5 5 B T4 0 -HF CS6 -2 0 5 B T3 0 -HF CS6 -1 5 5
Equipment
Measuring
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
13
STANDARD type
ANGLE HEAD
Adding a spindle increases work efficiency!
MODULAR type BT40/50

SOLID type BT40/50
Shank and head can The popular type that
be combined freely to can chuck small- to
match the application. large-diameter cutters.
M/C Tool
φ5.8〜25
φ0.5〜10
AHB AHA
AHC AHD
FLANGE type BT50 UNIVERSAL BT40/50

Heavy-duty type type

for Turning Mill
that mounts di- Cutting angle

rectly on the machine can be adjust-
spindle surface. ed arbitrarily.
φ5.8〜25
F-AHA AHU φ2.4〜20
F-AHD
General Purpose
Tool
Use of collet holder Comact design

To chuck a cutting tool, the collet chuck Ideal for internal machining.
Type CODE Q A B
system is used, which has a long his- Q AHB 5 57 46 62
tory of good performance. This product
JIG
is applicable to all the types of machin- MODULAR AHB 7 72 56 76

ing, including drilling and milling. AHB10 88 62 96
B SOLID AHA20 160 88 171
FLANGE AHA25 180 90 193
AHU10 154 27.5 156

Equipment
Measuring
UNIVERSAL
AHU20 188.5 35 192
A
Body-through coolant MST’s Quick Change system(AHD type)

Maintenance Tool
Coolant can be feed from a closer By adopting the BT30 Quick

position to the cutting edge. Change mechanism at the
Prevents heat generation inside angle axis, a large variety of
the body to achieve high-speed machining applications are
rotation. made possible.
(MODULAR type、UNIVERSAL type)
Wire EDM fixture
JIG Tool
Highest Guaranteed Accuracies Type CODE L

All standard type angle heads have passed an accuracy test and rotation test. AHB 5
AHB 7
MODULAR AHB10
Squareness Runout 40
B
L
A
accuracy 15 μm AHC10
L UNIVERSAL AHU10
+8μm
Information
AHA20
Technical
SOLID
AHA25
FLANGE AHD30 50
-8 μm UNIVERSAL AHU20
14
MODULAR type
ANGLE HEAD
Shank and head can be combined freely to AHB
match the application. Shank AHC
BT50 BT40
Various types of shanks and heads
are freely combined to meet your
machining needs.
AHB5 AHB7 AHB10 AHC10
M/C Tool
φ10
φ7
φ5
φ10
Head 45°
Body thru-coolant
Type Chucking range Gear ratio MAX. min-1 φ0.5〜10
Main spindle：Angle shaft Main spindle(CCW)：Angle shaft（CW）

AHB 5 φ0.5〜 5 1：1 5,000：5,000
for Turning Mill

AHB 7 φ0.5〜 7 6,000：6,000
AHB10 φ2.4〜10 (When using
body thru-coolant）
AHC10 BT40-AHB10-255
Fig. 1 L L1 Fig. 2
AHB φ95 Q AHC
General Purpose
CCW
A A
Tool
B 45° B
S
CW M D
D C
C
M G
Positioning pin Stationary bracket
CODE Fig. φD L φC L1 M A B G φQ
JIG
BT40ーAHB5 ー210 1 0.5～ 5 210 12 20 85 25 32 46 62 5.5 ER8
ー270 270 145 6.4
ーAHB7 ー180 0.5～ 7 180 19 22 60 29 43 56 76 5.3 ESX12
ー240 240 120 6.6
Equipment
Measuring
ーAHB10ー195 2.4～10 195 36 29 80 38 50 62 96 6.2 C10
ー255 255 140 7.9
ーAHC10ー230 2 230 － 110 45 32.5 65 ー 6.2
BT50ーAHB5 ー225 1 0.5～ 5 225 12 20 85 25 32 46 62 8.8 ER8
Available for
ー285 285 145 9.7
DIN/ CAT.
Maintenance Tool
ーAHB7 ー195 0.5～ 7 195 19 22 60 29 43 56 76 8.6 ESX12
ー255 255 120 9.9
Cutting data
ーAHB10ー210 2.4～10 210 36 29 80 38 50 62 96 9.5 C10
P. 20
ー270 270 140 11.2
■Option
●Spring collet→P.19 ●Retention knob →P.67 Shank / Head reference list
●Semi-finished positioning block→P.19 CODE Shank Head
Wire EDM fixture
■Std. Access. BT40ーAHB 5ー210 BT40ーMSー98 MB 5ー112

JIG Tool
●A complete set of spanners and wrenches. ー270 ー172

■Note ーAHB 7ー180 MB 7ー 82
●The phase of the drive key and the positioning pin may be set freely. ー240 ー142
●Standard specifications: S = 60 mm, 65 mm (BT40), 80 mm, 85 mm, and 110 mm (BT50). ーAHB10ー195 MB10ー 97
●Other shanks such as HSK are also available upon request.
ー255 ー157
■Caution ーAHC10ー230 MC10ー132
●For the shape and mounting position of the positioning block, contact the machine
BT50ーAHB 5ー225 BT50ーMSー113 MB 5ー112
manufacturer or MST.
●The height of the positioning pin depends on the shape of the positioning block. ー285 ー172
Information
Technical
●The machine spindle and angle shaft should rotate in reverse directions, so make sure ーAHB 7ー195 MB 7ー 82
the spindle rotates in the reverse direction. ー255 ー142
●For precautions and maintenance, refer to page 121. ーAHB10ー210 MB10ー 97
ー270 ー157
ーAHC10ー245 MC10ー132
15
SO LID type
ANGLE HEAD
The popular type that can chuck small- to

large-diameter cutters.
AHA
M/C Tool
AHD
for Turning Mill
φ5.8〜25
BT30 Quick-change type
Gear ratio MAX. min-1

Type Chucking range
General Purpose
AHA 20 φ5.8〜20 1：0.81 3000：2430

AHA 25 φ5.8〜25 1：0.96 2500：2400 BT50-AHA25-195
Tool
AHD 30 BT30 tools
Fig. 1 Fig. 2
AHA AHD
L1
JIG
L
M J
Q
CCW
A
S 95
Equipment
Measuring
B
Gauge line
CW
D C
G BT30 tools
Positioning pin Stationary bracket
Maintenance Tool
CODE Fig. φD L L1 M A B G φC J φQ
BT40ーAHA20 ー160 1 5.8〜20 160 40 86 65 95 88 50 65 171 7.3 C20

BT50ーAHA20 ー195 1 5.8〜20 195 40 92 65 95 88 50 65 171 13.1 C20
ー250 249 14.8
ーAHA25 ー195 5.8〜25 195 44 97 70 110 90 62 70 193 13.6 C25
ー250 249 15.3
Wire EDM fixture
ーAHD30 ー195 2 － 195 44 97 70 112.6 90 66 70 193 14.7 －

JIG Tool
■O ption
●Spring collet→P.19 ●Retention knob →P.67 ●Semi-finished positioning block→P.19
■Std . Access.
●A complete set of spanners and wrenches
■Note
●The phase of the drive key and the positioning pin may be set freely. Av ailab le for
●Standard specifications: S = 60 mm, 65 mm (BT40), 80 mm, 85 mm, and 110 mm (BT50). DIN/ CAT.
Information
●Other shanks such as HSK are also available upon request.

Technical
■Caution
●For the shape and mounting position of the positioning block, contact the machine manufacturer or MST. Cutting data
●The height of the positioning pin depends on the shape of the positioning block.
P. 20
●The machine spindle and angle shaft should rotate in reverse directions, so make sure the spindle rotates in the reverse direction.
●For precautions and maintenance, refer to page 121.
16
F LANGE type
ANGLE HEAD
Heavy cutting is possible by mounting the angle head flange type
directly on the machine spindle surface.
This angle head is applicable to heavy cutting by mounting to
the machine spindle. F-AHA
BT50
φ1 9 0
M/C Tool
( Flange dia. )
F -AHD

for Turning Mill
BT30 Quick-change type φ5.8〜25

Type Chucking range
General Purpose
AHA20 φ5.8〜20 1：0.81 3000：2430
AHA25 φ5.8〜25 1：0.96 2500：2400
Tool
F190-AHA25-350
AHD30 BT30 tools 1：0.96
Fig. 1 Fig. 2
AHA AHD
φ190 L L1
JIG
20 L2
M J
φ122
Q
BT50
A
φ220
CCW 95
Equipment
Measuring
B
Gauge line
φ140
CW
D C
Standard mounting plate
G BT30 tools
Shank
CODE Fig. φD L L1 L2 M A B G φC J φQ
Maintenance Tool
type Kg
F190ーAHA20 ー200 1 5.8〜20 200 40 160 92 65 95 88 50 65 171 － 18 C20

ー350 350 310 28
ーAHA25 ー200 5.8〜25 200 44 160 97 70 110 90 62 70 193 － 18.5 C25
ー350 350 310 28.5
ーAHD30 ー200 2 － 200 160 66 19.6 －
Wire EDM fixture
ー350 350 310 112.6 29.8

JIG Tool
■O ption ■Caution
●Spring collet→P.19 ●Retention knob →P.67 ●For mounting plate shapes and mounting bolt location, contact the machine manufac-
■Std . Access. turer or MST.
●The machine spindle and angle shaft should rotate in reverse directions, so make sure
the spindle rotates in the reverse direction.
●Standard mounting plate(No mounting holes are provided.)
●Mounting bolts for ANGLE HEAD
■Note
Information
●NT50U shank is also available.

Technical
17
UNIVERSAL type
ANGLE HEAD
Machining at every angle is possible with just this one unit.
Splash coolant-through body

Whatever machining angle is set, coolant is
properly supplied to the cutting edge.
AHU
M/C Tool
Body thru-coolant
90°
for Turning Mill
0°
φ2.4〜20
Type Chucking range
General Purpose
Main spindle：Angle shaft Main spindle(CW)：Angle shaft（CW）
AHU10 φ2.4〜10 1 : 1.5 3000 : 4500

Tool
AHU20 φ5.8〜20 1:1 3000 : 3000 BT50-AHU10-190
L L1
M
K
Q
JIG
CCW
A
S B
CW 0〜90°
Equipment
Measuring
Positioning pin G
D
C
Stationary bracket
G
CODE φD L L1 M A B K G φC φQ
Maintenance Tool
BT40 ーAHU10ー175 2.4～10 175 42 96 49 105 95 55 32 156 9.6 C10

BT50 ーAHU10ー190 2.4～10 190 42 90 49 105 95 55 32 192 13.9 C10
ーAHU20ー200 5.8～20 200 54 112 58.5 130 120 70 50 15.8 C20
■Option
●Spring collet →P.19 ●Retention knob →P.67 ●Semi-finished positioning block →P.19 ●Test bar Test bar
■Std. Access.
Use for super accurate angle adjustment.
Wire EDM fixture
■Note
JIG Tool
●The phase of the drive key and the positioning pin may be set freely. CODE Holder type
●Standard specifications: S = 60 mm, 65 mm (BT40), 80 mm, 85 mm, and 110 mm (BT50).
TBU10 AHU10
●Products other than BT shanks can be manufactured upon request.
■Caution TBU20 AHU20
●For the shape and mounting position of the positioning block, contact the machine manufacturer or MST.
●The machine spindle and angle shaft should rotate in reverse directions, so make sure the spindle rotates
in the reverse direction.
●The machine spindle and angle shaft should rotate in forward directions, so make sure the spindle rotates in the Available for
forward direction. DIN/ CAT.
Information

Technical
Cutting data
P. 20
18
SPR ING CO LLET
ANGLE HEAD
CODE φD φD1 L H Holder type
ER8 ESX12 ER8ーD 1 〜 5 （ 0．5 Steps ） 8.5 13.5 ー AHB 5
ESX12 ーD 1 〜 3 （ 0．5 Steps ） 12 19.5 ー AHB 7
4 〜 7 （ 1．0 Steps ）
C10ーD 0．2 Steps ）
2.6〜 5.8（ 17.2 26 18 AHB10
AHC10
6 〜10 （ 0．2 Steps ） 20 AHU10
C25
C20ーD 0．2 Steps ）
6 〜 9.8（ 29.5 50 29
C10 C20 AHA20
0．2 Steps ）
10 〜15.8（ 33
AHU20
H 16 〜20 （ 0．2 Steps ） 40
(Clamping length)
C25ーD 6 ，8 36.5 68 35 AHA25
M/C Tool
10 〜15 （ 0．5 Steps ） 46
D D１ 15.5〜20 （ 0．5 Steps ） 54
20.5〜25 （ 0．5 Steps） 57
L
■O ption ●Collet remover (C10 , C20) →P.38
Semi-finished positioning b lock

The semi-finished positioning block must be modified to the

CODE A B C W H d Main spindle Material
for Turning Mill

appropriate shape by the customer after delivery. Determine ABー15 15 43 58 92 58 20 BT40 S50C
the shape and dimensions as follows, and then modify the ー12 20 63 120 63 28 BT50
positioning block as necessary. 1. Obtain the machine manufacturer's drawing for the positioning block and modify
the positioning block in accordance with that drawing.
W H
2. Determine the dimensions as shown in the instruction and then modify.
W/2 W/2 50〜55HRC ●This block may not be applicable for dimensional reasons. Carefully check to see
whether the positioning block is applicable.
A ●The positioning block exclusively for your machine may also be available on request.
G d　
General Purpose
C ●For further information, please contact MST.
B
10°
Tool
Custom-mad e prod ucts
We are proud of our over 30 years of experience custom making products for
our customers. We can produce the best product for you depending on your
applications such as O.D and I.D machining thanks to our accumulated know-how.
JIG
ANGLE ATTACHMENT
SPECIAL DESIGN
1 2 months
〜6 1 6 ,2 0 0
特殊設計のノウハウ
SPECIAL DESIGN EXPERIENCE
特殊タイプ　 670台
製造実績 1台から製造納期標準タイプ 12,130台
30
years
1
unit
3 ～6
months
12,800
units
75°
Manufacturing Production Delivery Specially designed
History starting from 670 units
just 1 unit Standard type
unit units
12,130 units
な
加工 g 加工様々ョンons
外周 mac hinin 内面machinin
g
ーシ
リケ applicati
Exte
rnal
Inter
nal
アプ kinds of
us
Vario
Equipment
Measuring
Production starting Delivery Manufacturing
1211JE
For more information, please

from just 1 unit history contact MST Corporation.
75° ANGLE HEAD
Dual sid e machining ANGLE HEAD Medical Sid e face machining ANGLE HEAD
equip- □330
ment
Maintenance Tool
AL
M16 1
180
1
Hole・tap 1 0.57
762
MAX MAX
1500min-1 400min-1
φ200 Direct
BT50
Wire EDM fixture
210 mount
JIG Tool
Internal b ore surface machining ANGLE HEAD Internal b ore surface machining
ANGLE HEAD
AL 565 22
φ73.9
194 27 1 1
1.76
235 3
Information
φ60
Technical
MAX MAX
2650min-1 4500min-1
φ7 Direct
BT50
267 φ8 397 mount
19
Cutting d ata ANGLE HEAD ( STANDAR D TY PE)
ANGLE HEAD
MO DU LAR type
SUS304 φ1 0 A2017 φ1 0 S50C φ1 0
End mill Carb id e End mill
N 640 min -1 N 4000 min -1 N 640 min -1
2 flutes end mill 2 flutes
F 60 mm / min F 400 mm / min 2 flutes F 60 mm / min
V 20 m / min V 126 m / min V 20 m / min
fz 0.05 mm / t fz 0.05 mm / t fz 0.05 mm / t
2 2 5
M/C Tool
B T4 0 -AHB 1 0 -1 9 5 B T4 0 -AHB 1 0 -1 9 5 B T5 0 -AHB 1 0 -2 1 0
SO LID type
A2017 φ1 6 SUS304 φ1 2 SUS304 φ1 6 S55C φ1 2 FC30 φ1 2
End mill End mill End mill Drill End mill
N 1800 min -1 2 flutes N 527 min -1
2 flutes N 570 min -1
2 flutes
F 130 mm / min F 20 mm / min F 40 mm / min F 39 mm / min F 60 mm / min
V 90 m / min V 60 m / min V 29 m / min V 20 m / min V 31 m / min
fz 0.04 mm / t fz 0.06 mm / t fz 0.04 mm / t f 0.07 mm / rev fz 0.04 mm / t

for Turning Mill
5 2 3 4
3 0
B T5 0 -AHD3 0 -1 9 5
+
B T5 0 -AHA2 5 -1 9 5 B T4 0 -AHA2 0 -1 6 0 B T5 0 -AHA2 5 -1 9 5 B T4 0 -AHA2 0 -1 6 0 B T3 0 -CTA2 0 - 4 5
S50C φ1 6
End mill
N 630 min -1
General Purpose
2 flutes
F 80 mm / min
V 32 m / min
Tool
fz 0.06 mm / t
5
B T5 0 -AHA2 5 -1 9 5
JIG
U NIV ER SAL type

A2017 φ1 0 S50C φ2 0
End mill Carb id e
N 2000 min -1 N 350 min -1
end mill
F 200 mm / min F 70 mm / min
2 flutes
V 63 m / min V 22 m / min
Equipment
Measuring
f 0.07 mm / t fz 0.1 mm / t
1 5 5
B T5 0 -AHU 1 0 -1 9 0 ( 4 5 ° ) B T5 0 -AHU 2 0 -2 0 0 ( 4 5 ° )
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
20
M / C Tool
Pull collet type collet chuck DTA Retension knob
DETa-1 DTB
　Collet Holder DTE
P. 22 P. 77
Taper collet chuck CTH

Collet Holder CTA
P. 32
Needle-roller type chuck ART

Hi-ART
　milling chuck
P. 40
End-mill holder for ultra-heavy duty application SLZ

SUMMIT
P. 43
The face mill arbor for through-spindle coolant FMH-H

FMH RIGID type
d
an de
s exp ny
Serie lude ma hs.
Carbide
c core
to in nt lengt
re P. 46
diffe
The arbor for Indexable End Mill RSG

RED SCREW arbor
d
an de
s exp ny
Serie lude ma hs. Carbide
c integral
to in nt lengt type
re P. 48
diffe
Cutter arbor with spindle- FMH

through coolant
P. 55
Fine adjustment boring holder MFA

MICRO HEAD MBH
MBJ
P. 58
21
DETa-1 Collet Holder
ANGLE HEAD
Pull collet type COLLET HOLDER
2mm collapsibility with just one collet !!

DETa-1 COLLET HOLDER
Just 6 collets is all it takes to chuck 106 sizes of drills.

Pull collet design　
Slim design due to no tightening nut at the tip of holder.
Collet guide
Compatible with synchronized tapping.
Provides simple tooling lay-out.
Collapsibility The elastic deformation

M/C Tool
DETa-1
2mm portion that achieves
large collapsibility
12 segments
Drill Endmill Tap precise chucking

for Turning Mill
DTA DTB Wrench

DTE
Nut-tightening type of For high-speed cutting, Fully applicable
Wrench
easy operation High cost performance for coolant-through
General Purpose
Tool
JIG
Equipment
Measuring
Spanner
3 types of coolant-
through systems
available using
coolant cap & spacer
Maintenance Tool
P. 30
Coolant-through Coolant-through
Retention knob
Wire EDM fixture
with hole
JIG Tool
Ring Draw bolt D

φD
Pin DTE 7 29
Draw nut Rod Rod DTE12 40
Information
Technical
DETa-1 Collet DETa-1 Collet
22
DETa-1 Collet Using a high-precision Slim and compact without the nut at the tip.
ANGLE HEAD
collet will increase the life
of your tools.
P. 123 DTA DTB
Highest guaranteed accuracies throughout

entire chucking range (100% inspection). Size φD
Both large collapsibility and precise 3 type 10

chucking achieved by the pull collet
7 type 21
design.
φD 12 type 30
Run-out accuracy(μm)
Collet
D3 D7/D12 φD
Precision Collet 3 (6) 5 (10)

Standard Collet 5 (10) 10 (15)
※Accuracy of collet alone, ( ) means collapsibility usable.
Pre-balanced design (DTE type)
M/C Tool
D D L The collet holder is pre-balanced by previously designing the
～10 4×D holder to be as axisymmetrical as possible. When used with
L

10～13 40 the precision collet, it enables stable machining during high-
for Turning Mill

speed machining.
Reduces the number of conventional

collets needed by 90% (in-house comparison)
φ6～8 (D12-8)
General Purpose
Tool
es
t yp
o l l et c oll et
er c ier
Few ns eas nt ! Longer cutter life using
a
m e ag e m e through-spindle capability
n
ma P. 123
Pressure
Ten collets Only one collet OK! Coolant-through system 7 Mpa
JIG
Multiple coolant systems.
D3 Collet The best methods can be chosen from three options.
DTA3
DTB3
40 Coolant-through cutter
e el.
i n g st s For a cutting tool with oil holes. The
Equipment
Measuring
r a g l a s t e. shank of the cutting tool is sealed
ma y
e s a cur ac of t im with an O-ring, enabling reliable
s
U al ac i o d φ0.5～3.175 8pcs.
i er
I ni t long p coolant supply.
a Compatible with small-diameter
for
cutting tools starting from 3 mm.
Maintenance Tool
DTE
D7 Collet
DTA7
“SUKIMA-through”
DTB7 coolant-around tool
DTE7 50 High-pressure coolant performance
can be obtained even when using a
cutting tool without oil holes.
φ1～7 8pcs.
Wire EDM fixture
JIG Tool
DTE
D12 Collet Coolant-through collet
DTA12
DTB12
Coolant is supplied through the slits
DTE12 in the collet. No dedicated optional
70 parts are required.
Information
Technical
φ2.5～13 6 pcs. DTB

DTE
23
DETa-1 COLLET HOLDER A type (DTA)
ANGLE HEAD
Fig. 1 Fig. 2
C2 C1 φ60 C2 C1
C C
D D
L3 L2 L1 60 L3 L2 L1
Imbalance L L
value(g・mm) N
P. 124
BT50ーDTA12ー135
Fig. 3 Fig. 4
C2 C1
C2 C1
C C
D
M/C Tool
D1 D
L1
L2 L
L3 L2 L1
L
BT30ーDTA3ー90
for Turning Mill
S32ーDTA12ー100
General Purpose
CODE Fig. φD L φC L1 L2 L3 φC1 φC2 φD1

Tool
BT30－DTA 3－ 90 1 0.5～ 3.175 90 10 27 26 15 22 25 ー 0.5 2.4

－DTA 7－ 90 1 ～ 7 21 30 37 1 38 42 0.7 6.7
－120 120 60 0.8 7.9
－DTA12－120 2.5 ～13 30 52.5 42 3.5 45 45 1.0 10.4
BT40－DTA 3－ 95 1 0.5～ 3.175 95 10 27 26 15 22 25 ー 1.1 3.9
－125 125 45 1.2 4.3
JIG
－DTA 7－105 1 ～ 7 105 21 38 37 3 38 60 1.3 8.5

－135 135 60 11 43 1.4 9.5
－165 165 41 1.7 10.8
－195 195 71 2.1 12.1
－DTA12－120 2.5～13 120 30 52.5 40 0.5 45 58 1.5 11.6
Equipment
Measuring
－150 150 75 8 50 1.7 13.8

－180 180 38 2.1 15.5
－210 210 68 2.6 17.1
BT50－DTA 7－105 1 1 ～ 7 105 21 30 37 ー 38 ーー 3.8 15.5
－135 135 60 3.9 16.6
Maintenance Tool
－165 165 30 43 4.0 18.0

－195 195 60 4.4 19.5
－255 255 120 5.0 18.2
－315 2 315 5.9 19.1
－DTA12－135 1 2.5～13 135 30 52.5 40 4.5 45 50 4.1 19.4
－165 165 75 12 4.3 21.6
－195 195 42 4.7 23.4
Wire EDM fixture
－255 255 102 5.5 22.3

JIG Tool
－315 2 315 6.6 23.3

A63 －DTA 3－ 90 3 0.5～ 3.175 90 10 27 26 11 22 25 ー 0.8 3.0
－120 120 41 1.0 3.4
－DTA 7－105 1 ～ 7 105 21 30 37 12 38 50 1.1 17.3
－120 120 38 19 1.3 18.3
－150 150 60 27 1.7 20.3
Information
Technical
－DTA12－120 2.5～13 120 30 52.5 40 1.5 45 1.2 21.9

－150 150 75 9 1.4 25.2
－180 180 39 1.8 27.7
24
CODE Fig. φD L φC L1 L2 L3 φ C1 φC2 φD1
ANGLE HEAD
A100 −DTA 7−135 3 1.0∼ 7 135 21 30 37 39 38 50 ー 2.7 33.8
−165 165 60 2.8 35.5
−225 225 99 3.7 33.6
−DTA12−135 2.5∼13.000 135 30 52.5 40 13.5 45 2.7 37.1

−165 165 75 21 2.9 40.4
−225 225 81 3.8 39.7
E32 −DTA 3− 75 3 0.5∼ 3.175 75 10 27 26 2 22 25 ー 0.2 1.8
E40 −DTA 3− 75 3 0.5∼ 3.175 75 10 27 26 2 22 25 ー 0.3 1.7
E50 −DTA 3− 80 3 0.5∼ 3.175 80 10 27 26 1 22 25 ー 0.5 2.1
F63 −DTA 3− 90 3 0.5∼ 3.175 90 10 27 26 11 22 25 ー 0.8 2.3
−120 120 41 27 26 0.9 2.7
DN40A −DTA 3− 95 1 0.5∼ 3.175 95 10 27 26 10.8 22 25 ー 1.1 4.6
M/C Tool
DIN −125 125 40.8 1.2 5.0
DN40A −DTA 7−105 1 1.0∼ 7 105 21 30 43.8 12.1 38 45 ー 1.2 11.9
−135 135 60 37 18.9 1.3 14.4

DIN
−DTA12−130 2.5∼13 130 30 52.5 56.9 ー 45 ー 1.5 18.0
for Turning Mill

−160 160 75 66.4 1.7 20.0
DN50A −DTA 7−135 1 1.0∼ 7 135 21 60 37 3 38 50 ー 3.4 20.1
−165 165 33 43 3.6 20.0
DIN
−195 195 63 3.9 20.6
−DTA12−135 2.5∼13 135 30 52.5 40 7.5 45 50 3.6 21.5
General Purpose
−165 165 75 15 3.8 25.8
−195 195 45 4.2 26.4
Tool
CT40 −DTA 3− 95 1 .02∼.13 3.74 0.39 1.06 1.02 .28 .87 .98 ー 2.4 4.4
−125 4.92 1.46 2.7 4.8
DIN
−DTA 7−102 .04∼.28 4.01 0.83 1.18 1.46 .63 1.49 1.75 2.8 8.1
−132 5.19 2.36 2.9 9.3
−DTA12−130 .10∼.51 5.11 1.18 2.08 1.57 1.77 3.3 11.7
−152 5.98 2.95 .61 3.8 13.5
JIG
CT50 −DTA 7−102 1 .04∼.28 4.01 0.83 1.18 1.46 .63 1.49 2.75 ー 7.1 11.8
−132 5.19 2.36 7.3 13.0
T.
CA
−152 5.98 .71 1.69 7.7 13.9
−203 7.87 2.71 8.6 14.0
−DTA12−130 .10∼.51 5.11 1.18 2.08 1.57 .73 1.77 ー 7.7 15.6
Equipment
Measuring
−152 5.98 2.95 .71 7.9 17.5
−203 7.87 2.09 1.97 9.3 18.3
ST16 −DTA 3 4 0.5∼ 3.175 60 10 27 60 ー 22 25 16 ーー
ST20 −DTA 3 4 0.5∼ 3.175 60 10 27 60 ー 22 ー 20 ーー Maintenance Tool
ST32T −DTA 7− 75 4 1.0∼ 7 75 21 31.5 100 ー 38 ー 32 ーー
−105 105 61.5
−DTA12−105 2.5∼13 30 52.5 45
−135 135 75
S32 −DTA 7− 75 4 1.0∼ 7 75 21 31.5 70 ー 38 ー 32 ーー
−DTA12−100 2.5∼13 100 30 52.5 45
Wire EDM fixture
■Option
JIG Tool
●DETa-1 collet→P.31 ●Spanner→P.31 ●Retention knob ( BT) →P.67 Cutting data

●Cleaning tool→P.31
P. 32
■Std. Access. Rod (DTA3 Type)
●Coolant duct (Fixed)( HSK-A )→P.110 ●Rod ( DTA3 )
■Note These are necessary when attaching a collet to
●Swing type coolant ducts are available upon request(HSK-A). the holder (DTA3).
For details, please contact us.
●ATC may not be possible for some machining centers with BT30-DTA12-120. M4
Rod Collet
5
Information
■Caution
Technical
●HSK-E and F shank don't come with a coolant duct and cannot be attached. 19
CODE Holder type Q’ty
PRーDTA3 DTA3 2pcs.
Holder
25
DETa-1 COLLET HOLDER B type (DTB)
ANGLE HEAD
Fig. 1 C1 Fig. 2 φ70 C1

C C
D D
Imbalance L3 L2 L1 L4 L3 L2 L1
N
value(g・mm) L L
P. 124
BT40ーDTB7ー105 Fig. 3 Fig. 4

C1
C1 C
C
D D
L2 L1 L3 L2 L1
L3
L L
M/C Tool
E40ーDTB3ー70 Fig. 5 Fig. 6

C C
D1 D D1 D
for Turning Mill
L1
L2 L
L1 L
S32ーDTB7ー15
General Purpose
CODE Fig. φD L φC L1 L2 L3 L4 φC1 φD1
BT30－DTB 3－ 90
Tool
1 0.5～ 3.175 90 10 27 13 28 ー 25 ー 0.6 1.7

－DTB 7－ 75 1 ～ 7 75 21 53 ーーー 0.5 2.4
－105 105 83 3.4
－DTB12－ 75 75 30 53
－105 2.5～13 105 83 0.7 5.6
BT40－DTB 3－ 80 1 0.5～ 3.175 80 10 27 13 13 ー 25 ー 1.3 2.8
－110 110 43 1.4 3.2
JIG
－110L 57 13 1.3 2.8

－DTB 7－ 60 1 ～ 7 60 21 33 ーーー 1.0 3.7
－105 105 78 1.1 4.8
－135 135 75 11.8 21.2 30 1.3 5.2
－165 165 75.5 35.3 27.2 40 1.6 5.4
Equipment
Measuring
－195 195 57.2 1.9 5.6

－DTB12－ 90 2.5～13 90 30 63 ーーー 1.2 5.3
－120 120 93 1.3 7.6
－150 150 105 11.8 6.2 40 1.5 8.4
－180 180 36.2 1.8 8.7
Maintenance Tool
－210 210 66.2 2.1 8.9

BT50－DTB 7－ 75 1 1 ～ 7 75 21 37 ーーーーー 3.5 11.7
－105 105 67 3.7 12.3
－135 135 75 11.8 10.2 30 3.8 18.6
－195 195 58.8 23.2 50 4.6 25.0
－255 255 75.5 82.3 59.2 60 6.1 27.6
Wire EDM fixture
－315 2 315 75 58.8 43.7 99.5 50 7.4 33.9

JIG Tool
－DTB12－ 75 1 2.5 ～13 75 30 37 ーーーー 3.7 12.5

－105 105 67 3.9 14.8
－135 135 97 4.0 15.3
－195 195 105 35.3 16.7 50 4.7 24.3
－255 255 58.8 53.2 60 5.9 28.4
－315 2 315 50.2 63 7.5 34.1
Information
Technical
A63 －DTB 3－ 75 3 0.5～ 3.175 75 10 27 13 4 ー 25 ー 0.8 6.9

－105 105 34 0.9 7.5
－105L 57 4 0.8 7.0
26
CODE Fig. φD L φC L1 L2 L3 L4 φ C1 φD1
ANGLE HEAD
E25 －DTB 3－ 58 3 0.5～ 3.175 58 10 27 16 4.6 ー 18 ー 0.1 0.4
E32 －DTB 3－ 65 3 0.5～ 3.175 65 10 27 16 4.5 ー 20 ー 0.2 0.6
－DTB 7－ 65K 4 1 ～ 7 21 30 14.2 10.8 26 0.9
E40 －DTB 3－ 70 3 0.5～ 3.175 70 10 27 13 ーー 20 ー 0.3 0.9
－DTB 7－ 95 4 1 ～ 7 95 21 50 11.8 13.2 30 0.4 1.6

－DTB12－110 2.5～13 110 30 90 ーーー 0.5 2.8
E50 －DTB 3－ 75 3 0.5～ 3.175 75 10 27 16 1.5 ー 20 ー 0.5 1.7
－DTB 7－100 4 1 ～ 7 100 21 50 11.8 12.2 30 0.6 3.2
－DTB12－115 2.5～13 115 30 89 ーーー 0.8 4.2
F63 －DTB 3－ 75 3 0.5～ 3.175 75 10 27 13 4 ー 25 ー 0.8 2.1
－105 105 34 0.9 2.5
－105L 57 4 0.8 2.1
F63M－DTB 7－100 4 1 ～ 7 100 21 50 11.8 12.2 ー 30 ー 0.9 3.3
－DTB12－120 2.5～13 120 30 70 40 1.1 4.8
M/C Tool
DN40AD－DTB 3－ 80 1 0.5～ 3.175 80 10 27 13 18.8 25 ーー 1.2 3.5
－110 110 38.8 1.3 3.6
DIN
－110L 57 18.8 1.2 3.9

－DTB 7－105 1 ～ 7 105 21 74 ー 12.1 ー 44.45 1.1 4.8
for Turning Mill

－135 135 75 11.8 17 30 1.2 5.0
－DTB12－105 2.5～13 105 30 74 ー 12.1 44.45 1.2 5.7
－135 135 104 1.3 8.0
DN50AD－DTB 7－135 1 1 ～ 7 135 21 75 11.8 13.2 15.9 30 ー 3.3 14.9
－195 195 58.8 26.2 50 4.1 21.5
DIN
－DTB12－135 2.5～13 135 30 100 ーーー 3.5 11.7
General Purpose
－195 195 105 35.3 19.7 50 4.2 20.8
Tool
CT40 －DTB 3－ 80 1 .02～.13 3.15 .39 1.06 .51 .20 .98 ーー 2.4 3.3
－110 4.33 1.38 2.7 3.7
T.
CA
－110L 2.24 .20 2.4 3.3
－DTB 7－105 .04～.28 4.13 .83 2.76 ー .63 ー 1.75 ー 2.4 4.6
－135 5.31 2.95 .46 .52 ー 1.18 ー 2.9 5.2
－DTB12－120 .10～.51 4.72 1.18 3.34 ー .63 ー 1.75 ー 1.3 7.5
－150 5.91 3.66 .88 .62 ーー 3.5 8.5
JIG
CT50 －DTB 7－135 1 .04～.28 5.31 .83 2.91 .46 .52 ー 1.18 ー 7.3 14.8
－195 7.68 2.31 1.03 ー 1.97 ー 9.0 21.4
T.
CA
－DTB12－135 .10～.51 5.31 1.18 3.94 ー .63 ー 2.75 ー 7.7 11.6
－195 7.68 4.13 1.39 .78 ー 1.97 ー 9.0 20.8
ST12 －DTB 3 5 0.5～ 3.175 29 10 25 61 ーーー 12 ーー
Equipment
Measuring
ST16 －DTB 3 5 0.5～ 3.175 38.5 10 27 81.5 ーーー 16 ーー
ST20 －DTB 3 5 0.5～ 3.175 48 10 27 102 ーーー 20 ーー
ST25T－DTB 7－ 15 6 1 ～ 7 15 21 110 ーーーー 25 ーー
－ 45 45
－ 75 75 Maintenance Tool
ST32T－DTB 7－ 15 6 1 ～ 7 15 21 92 ーーーー 32 ーー
－ 45 45
－ 75 75
－DTB12－ 15 2.5～13 15 30
－ 45 45
－ 75 75
S32 －DTB 7－ 15 6 1 ～ 7 15 21 70 ーーーー 32 ーー
Wire EDM fixture
－DTB12－ 40 2.5～13 40 30
JIG Tool
■Option
●DETa-1 collet→P.31 ●Wrench→P.31 ●Retention knob ( BT ) →P.67 Retention knob for BT30-DTB12
●Cleaning tool→P.31
■Std. Access. 62 CODE φD φd θ Note
●Coolant duct(Fixed)( HSK-A ) →P.110 5 13 5 In accordance
Pー538 8 4 45
■Note with MAS-1
●Swing type coolant ducts are available upon request(HSK-A). 11 d In accordance
For details, please contact us. ー535 7.5 2.5 60
Information
M8 with MAS-2
Technical
●BT30-DTB12 requires the dedicated retention knob, which has the feature of θ D
draw bolt. Please order P-333 or P-334.
Please use a commercially available 13mm single -ended wrench.
Cutting data
●For the E32-DTB7-65K, collet collapsibility is not available. The clamping
diameter applies only to nominal end-mill shank size. P. 29
●HSK-E shank doesn't come with a coolant duct and cannot be attached.
■Caution
27
DETa-1 COLLET HOLDER E type (DTE)
ANGLE HEAD
Fig. 1 Coolant cap Fig. 2 C2 Coolant cap

C1 C C1 C
D D
L2
Imbalance L2
value(g・mm) N L3 L1 DTE 7=3

L1 DTE 7=3
P. 124 L DTE12=4.5
L DTE12=4.5
BT40ーDTE7ー120
Fig. 3 Coolant cap Fig. 4 C2 Coolant cap

C1 C C1 C
D D
L2 L2
L1 DTE 7=3 L3 L1 DTE 7=3
L DTE12=4.5 L DTE12=4.5
M/C Tool
A63ーDTE12ー120
CODE Fig. φD L φC L1 L2 L3 φC1 φC2

BT30－DTE 7－ 60－MAS1 1 1 ～7 60 24 38 11.5 ー 29 ー 0.6 3.2

for Turning Mill
－MAS2
－DTE12－ 75－MAS1 2.5～ 13 75 34 53 14 40 0.9 4.9
－MAS2
BT40－DTE 7－ 90 1 1 ～ 7 90 24 63 11.5 ー 29 ー 1.3 4.9
－120 2 120 70 23 40 1.5 6.2
－150
General Purpose
150 53 50 1.9 7.2

－180 180 83 2.4 8.9
Tool
－210 210 113 2.9 9.8

－DTE12－ 90 1 2.5～ 13 90 34 63 14 ー 40 ー 1.5 6.1
－120 120 93 1.8 7.4
－150 150 123 2.1 9.4
－180 2 180 140 13 50 2.5 9.6
－210 210 43 2.9 11.7
BT50－DTE 7－105
JIG
1 1 ～ 7 105 24 67 11.5 ー 29 ー 3.9 15.6

－135 2 135 70 27 40 4.2 16.5
－165 165 57 50 4.6 18.7
－225 225 117 60 6.0 24.4
－285 285 177 7.3 30.1
Equipment
－DTE12－105
Measuring
1 2.5～ 13 105 34 67 14 ー 40 ー 4.2 16.6

－135 135 97 4.5 18.9
－165 165 127 4.8 21.0
－225 2 225 140 47 60 5.7 24.5
－285 285 107 70 7.6 27.1
A40 －DTE 7－ 95 3 95 24 75 11.5 ー 29 ー 0.6 4.4
Maintenance Tool
1 ～ 7
－DTE12－105 2.5～ 13 105 34 85 14 40 0.9 14.4
A50 －DTE 7－105 3 1 ～ 7 105 24 79 11.5 ー 29 ー 0.7 9.8
－DTE12－120 2.5～ 13 120 34 94 14 40 1.1 12.5
A63 －DTE 7－105 4 1 ～ 7 105 24 70 11.5 9 29 40 1.1 12.3
－120 120 24 1.2 12.8
－150 150 54 50 1.7 14.3
Wire EDM fixture
－180 180 84 2.1 15.7

JIG Tool
－DTE12－120 3 2.5～ 13 120 34 94 14 ー 40 ー 1.5 14.9

－150 150 124 1.8 16.0
－180 4 180 140 14 50 2.3 19.1
A100－DTE 7－135 4 1 ～ 7 135 24 70 11.5 36 29 40 2.7 31.0
－165 165 66 50 3.2 32.4
－225 225 126 60 4.7 35.7
Information
Technical
－DTE12－135 3 2.5～ 13 135 34 106 14 ー 40 － 3.0 33.1

－165 165 136 3.3 36.2
－225 4 225 140 56 60 4.4 40.3
28
CODE Fig. φD L φC L1 L2 L3 φC1 φC2
ANGLE HEAD
DN40AD－DTE 7－ 90 2 1.0～ 7 90 24 58　 11.5 12.9 29 45 1.2 5.4
－120 120 70　 30.9 1.4 6.4
DIN
－DTE12－ 90 2.5～13 90 34 58.8 14　 12.1 40 1.3 6.1
－150 150 118.8 1.9 9.3
DN50AD－DTE 7－105 2 1.0～ 7 105 24 70　 11.5 15.9 29 70 3.4 12.0
－165 165 60　 50 4.2 15.1
DIN

－DTE12－105 2.5～13 105 34 14　 15.9 40 70 3.6 12.6
－165 165 130　 4.2 17.0
CT40 －DTE 7－ 90 1 .04”～.28” 3.54” .94 2.17” .45” .63” 1.14” 1.75” 2.7 5.2
T.
－120 2 4.72” 2.75” 1.22” 3.3 6.2
CA
－DTE12－ 90 1 .10”～.51” 3.54” 1.34 2.17” .55” .63” 1.57” 3.1 6.1
－150 5.91” 4.53” 4.2 9.6
CT50 －DTE 7－105 1 .04”～.28” 4.13” .94 2.75” .45” 63” 1.14” 2.75” 7.5 11.8
T.
－165 2 6.50” 2.36” 1.97” 9.0 15.0
CA
－DTE12－105 1 .10”～.51” 4.13” 1.34 .55” .63” 1.57” 2.75” 7.9 12.9
－165 6.50” 5.12” 9.3 17.3
M/C Tool
■Option ■Note
●DETa-1 collet→P.31 ●Wrench→P.31 ●Retention knob ( BT40 / 50 )→P.67 ●Swing type coolant ducts are available upon request(HSK-A).
●Tap rod（DTE12）→P.30 ●Spacer ●Coolant cap For details, please contact us.
●Spacer set ●Coolant-through system ■Caution
■Std. Access. ●A dedicated retention knob is supplied with the BT30-DTE as a standard

●Coolant duct (Fixed)( HSK-A ) →P.110 ●Retention knob ( BT30 ) accessory. When ordering, specify whether a MAS-1 or MAS-2 retention
for Turning Mill

knob is required. To replace the retention knob, please contact us.
Cutting data ●For precautions and maintenance, refer to page 121.
DTA
S50C S50C Aluminum
φ3 Carbide drill φ3 Carbide drill φ8.5 Carbide
3 flutes 3 flutes drill
General Purpose
N 9000 min-1 N 6000 min-1 N 10000 min-1
Tool
F 900 mm/min F 150 mm/min F 5000 mm/min
V 85 m/min V 60 m/min V 267 m/min
f 0.1 mm/rev fz 0.013 mm/t f 0.5 mm/rev
0.6
9 30
E32-DTA3-75 E32-DTA3-75 BT40-DTA12-165
DTB
A6061 A5052 S50C S50C
JIG
φ0.8 Straight φ0.8 Straight R1.5 Carbide φ3 Carbide
drill drill ball endmill Square endmill
N 6000 min-1 N 10000 min-1 N 12500 min-1 2 flutes
F 60 mm/min F 400 mm/min F 1560 mm/min N 6000 min-1
V 15 m/min V 25 m/min V 120 m/min F 150 mm/min
Equipment
Measuring
f 0.125 mm/rev V 60 m/min
4 3 0.15 6
fz 0.013 mm/t
0.65
0.21
BT40-DTB3-110L ※234 pcs. A63-DTB3-75 E32-DTB3-65 E32-DTB3-65
S50C STAVAX(42HRC) SKD61(46HRC) SKD61(46HRC)

R1.5 Carbide φ0.6 Carbide R3 Carbide ball φ10 Carbide
Maintenance Tool
ball endmill straight drill endmill 2 flutes endmill 2 flutes

N 12500 min-1 N 3715 min-1 N 5000 min-1 N 4500 min-1
F 1560 mm/min F 30 mm/min F 1500 mm/min F 1500 mm/min
V 120 m/min V 7 m/min V 94 m/min V 141 m/min
f 0.125 mm/rev f 0.01 mm/rev fz 0.15 mm/t fz 0.17 mm/t
0.15 0.2
11
0.4
0.2
E32-DTB3-65 F63-DTB3-75 BT40-DTB7-105 BT40-DTB12-90
Wire EDM fixture
DTE
JIG Tool
S50C SKD61(53HRC)
φ6 Carbide drill R5 Carbide ball
endmill 2 flutes
N 6369 min-1 N 20000 min-1
F 1592 mm/min F 6000 mm/min
Information
V 120 m/min V 628 m/min

Technical
f 0.25 mm/rev fz 0.15 mm/t

18
0.5
A63-DTE7-105 A63-DTE12-120
29
Tap rod ( DTE12 )
ANGLE HEAD
CODE Applicable taps φD W

To be used as a stopper for synchronized tapping.
TRー5 JIS M 8 10.5 5
31
ー5.5 JIS M10 5.5
φ6 D W M 8
ー6 OSG M10 6
4 Cutting data
ー6.5 JIS M12 6.5
12 32 ー8 OSG M12 12 8 P. 29
Tap rod
44 JIS M14
COOLANT-THROUGH SYSTEM (OPTION)

Spacer
O-ring
EA type EBM type
(groove-type)
D D
M/C Tool
3.4mm2 DTE
Clearance area Holder
CODE Holder type φD Q’ty CODE Holder type φD Q’ty
7EAー 3.5ー3 DTE 7 3 ～ 3.5 3pcs. 7EBMー 3ー3 DTE 7 3 3pcs.

for Turning Mill
1set ー 4ー3 4 1set

ー 4 ー3 3.5～ 4
ー 6ー3 6
ー 4.5ー3 4 ～ 4.5
12EBMー 3ー3 DTE12 3 3pcs.
ー 5 ー3 4.5～ 5 ー 4ー3 4 1set
ー 5.5ー3 5 ～ 5.5 ー 6ー3 6 DETa-1
ー 8ー3 8 Collet
ー 6 ー3 5.5～ 6
ー 6.5ー3 6 ～ 6.5 ー10ー3 10 P. 31
ー12ー3 12
General Purpose
ー 7 ー3 6.5～ 7
12EAー 3.5ー3 DTE12 3 ～ 3.5 3pcs.
Tool
1set
ー 4 ー3 3.5～ 4 EBS type
ー 4.5ー3 4 ～ 4.5 ( round-type) D
ー 5 ー3 4.5～ 5 Spacer
S㎜ 2 EA type
ー 5.5ー3 5 ～ 5.5
Clearance area
ー 6 ー3 5.5～ 6 Pin point coolant Coolant-
CODE Holder type φD S Q’ty
ー 6.5ー3 6 ～ 6.5 supply, around tool,
7EBSー 3.6ー3 DTE 7 3 3.1 3pcs.
ー 7 ー3 6.5～ 7 1set
Spacer Spacer
JIG
ー 4.5ー3 4 3.3
ー 8 ー3 7.0～ 8.0
EBM type EBS type
ー 6.4ー3 6 3.9
ー 9 ー3 8.0～ 9.0 12EBSー 3.6ー3 DTE12 3 3.1 3pcs.
ー 4.5ー3 4 3.3 1set
ー10 ー3 9.0～10.0
ー 6.4ー3 6 3.9
ー11 ー3 10.0～11.0
ー 8.4ー3 8 4.6
ー12 ー3 11.0～12.0 ー10.3ー3 10 4.8
Equipment
Measuring
ー13 ー3 12.0～13.0 ー12.3ー3 12

Coolant cap
Spacer blank type
Depend on cutter or application, CODE Holder type Q’ty
please modify. 7EBFーBLー5 DTE 7 5pcs. Cutter with
Maintenance Tool
12EBFーBLー5 DTE12 1set oil hole

Spacer set Cutter without
oil hole
Holder Contents of set
CODE
type Spacer Q’ty Coolant cap Q’ty
DTE 7 　7EA ー3.5～7 (1 ea.) CLPー 7E 1pcs.
7ESーA 　7EBMー3 , 4 , 6 total
Wire EDM fixture
　7EBS ー3.6 , 4.5 , 6.4 14pcs.
DTE12 12EA ー3.5～13 (1 ea.) CLPー12E 1pcs.
Coolant-through
JIG Tool
12ESーA 12EBMー3～12 total cutter SUKIMA-through

■Std. Access.
12EBS ー3.6～12.3 26pcs.
●Collet driver
Coolant cap
Information
CODE Holder type φD φC H

Technical
O-ring
CLPー 7E DTE 7 21 29 14
C D
CLPー12E DTE12 30 40 18
30
DETa-1 COLLET
ANGLE HEAD
CODE Holder Collap-
φD φD1 L H1 H2
Standard Collet Precision Collet type sibility
D3 D 3ー 0.6 0.5 ～ 0.6 DTA 3 0.1 7 40 30 6.9

DTB 3
D7
ー 0.8 0.6 ～ 0.8 0.2
ー 1 0.8 ～ 1.0 7.0

D12
L ー 1.5 1 ～ 1.5 0.5 7.2
H1 ー 2 1.5 ～ 2.0 7.3
( Max insertion length )
H2
( minimum insertion length )
ー 2.5 2 ～ 2.5 7.4
ー 3 2.5 ～ 3.0 7.5
ー 3.175 2.7 ～ 3.175 7.6
D D1
D 7ー 1.5 1 ～ 1.5 DTA 7 0.5 17 50 36 7.0
Add “-P” after the DTB 7
ー 2 1.5 ～ 2.0 10.0
standard type item DTE 7
Highest Guaranteed ー 2.5 code. 2 ～ 2.5 12.0
ー 3
M/C Tool
Accuracies throughout 〈 Example 〉
2.5 ～ 3.0
entire chucking range ー 4 D12ー6ーP

3 ～ 4.0 1 14.0
ー 5 4 ～ 5.0 16.0
Run-out accuracy (μm)
Collet ー 6 5 ～ 6.0

D3 D7 / D12
ー 7
for Turning Mill

Precision Collet 3 (6) 5 (10) 6 ～ 7.0
Standard Collet 5 (10) 10 (15) D12ー 4 2.5 ～ 4.0 DTA12 1.5 26 70 50 16.0
DTB12
※ Accuracy of collet alone, ( ) means ー 6 4 ～ 6.0 2 20.0
collapsibility usable. DTE12
ー 8 6 ～ 8.0 22.0
D L
～10 4×D D
ー10 8 ～ 10.0
10～13 40
L ー12 10 ～ 12.0
ー13
General Purpose
11 ～ 13.0
Tool
Spanner・ Wrench
CODE Holder type Fig. B R L Tightening torque (kgf)
F ー 22 DTA 3 1 ー 22
Adjustable torque wrench
110
0.2～0.3 The nut-tightening torque can be adjusted more properly.
DW ー 2.5 ー110 DTB 3 2 2.5 ー
JIG
F ー 38 DTA 7 3 ー 19 148.5 2.0～4.0
ー 45 DTA12 22.5 225 7.0
TW ー 4 E32 ー DTB 7 4 4 ー 77 1.4
ー 5 DTB 7 5 153
ー 6 DTB12 6 173 3.4 Spanner for Adjustable Holder type
torque wrench torque wrench
DTE 7 5 5 110 1.4
F - 38AW
Equipment
DTA 7
Measuring
DTE12 1.8 AWー1
E40 ー DTB12 -45AW DTA12
W ー135DR
E50 ー DTB12
F63 ー DTB 7 1.4
F63 ー DTB12 1.8
Attaching a cutting tool(DTB, DTE)
■Std. Access.
If a retention knob with hole is used, direct
Maintenance Tool
●Collet driver F-38, F-45, TW-5, TW-6, W135-DR
tightening of cutting tools is possible.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
Diameter of machining
L L Retention knob
L L DTB 3 ：Φ4 ～
R L DTB 7, DTE ：Φ6 ～
B R B DTB12 ：Φ7 ～
B
Wire EDM fixture
JIG Tool
Collet driver Cleaning tool

The DETa-1 collet can be attached/detached with ease. Apply this tool to clean the hard-to-clean inside portion of DTA3 and DTB3 holders.
The initial accuracy of tool holders can be made to last a long time by keeping the
internal bore clean.
CODE Q’ty
D12 CODE Q’ty
DRー1 2pcs.
Information
PCT01ー10 10 pcs.
Technical
ー25 25 pcs.
D7
31
COLLET HOLDER
ANGLE HEAD
Taper collet chuck
The optimum holder choices for a variety of applications

COLLET HOLDER
M/C Tool
for Turning Mill
CTA
coolant-through
General Purpose
Tool
Coolant- “SUKIMA” Coolant-

CTH
Through
Cutter
Coolant
Around Tool
Through
Collet
For high-speed
Precision spring collet Ideal taper angle

JIG
The increased number of slits Since the collet angle is smaller than that of typical collets, the
ensures the uniform tightening collapsibility is also small. However, because the collet can be
and high accuracy of the collet. inserted deeper into the main body, the gripping area increases,
it provides stable run-out accuracy and high gripping force and
rigidity for end milling. This collet as a taper angle of 6°, the ideal
Equipment
Measuring
angle for run-out accuracy, gripping force and rigidity.

Slits Thick!
6 to 12 segments MST
Using a high-precision
6° taper
Maintenance Tool
collet will increase the Long

life of your tools.
P. 123 Small
Highest guaranteed accuracies Overhang short

throughout entire chucking
range(100% inspection) True clamping length
Wire EDM fixture
Run-out When the taper angle decreases, the

Collet
JIG Tool
accuracy(μm) collapsibility decreases; however, the

true clamping length increases.
Precision Collet 5
Standard Collet 10 Others Overhang long
※Accuracy of collet alone
Information
16°taper
Technical
D L
Short
D less than 10 4×D
10　～20 40
L
20.5～42 60 Large
Thin
32
Thick and highly rigid body Nut for high accuracy
ANGLE HEAD
・ Thick body. ・ Because steel ball bearings are Steel ball
built into the nut, the collet does
・ The nut part is compact not get twisted when tightened.
and has less interference. Retainer
・ The threaded area and the
・ Short holder length. ball bearing grooves for steel
COLLET HOLDER
bearings are finished using the
same process after heat treat-
Thick ment, thus providing high accu-
High rigidity racy with no distortion.
・ St able t ightening forc e and
smoothly rotation achieve high
MIN. 45L
accuracy.
Compact
Less interference
M/C Tool
Five main body types based on cutting tool size

CTH10 CTH20 CTH25 CTH32 CTA40
for Turning Mill

CTA10 CTA20 CTA25 CTA32
φ36 φ50 φ62 φ74 φ90
φ2.4〜10 φ5.8〜20 φ5.8〜25 φ24.8〜32 φ31.8〜42
General Purpose
C10 C20 C25 C32 C40
Tool
A variety of holder lengths
JIG
60L 75L 90L 105L 120L 135L 150L 165L 180L 195L 210L 255L
45L
315L
Equipment
Measuring
Maintenance Tool
Longer cutter life using

Pre-balanced by previously designing (CTHtype) through-spindle capability
P. 123
The collet holder (CTH
type) is pre-balanced by
previously designing the
Coolant-through system
holder to be as axisym- Pressure
The spindle-through feature can be used
metrical as possible.
7 Mpa
Wire EDM fixture
whether the cutting tool has oil holes or not.

When used with the pre-
JIG Tool
P. 39
cision collet, it enables
stable machining during Coolant-Through “SUKIMA” Coolant-Through
high-speed machining. Cutter Coolant Around Tool Collet
Comparison in imbalance value

Spring collet Cutter used Imbalance value
Holder code
used Diameter Overhang (g・mm)
Information
Technical
Precision collet
BT30ーCTH10ー75 3.3
C10ー10ーP
φ10 40
Standard collet
ーCTA10ー75 13.1
C10ー10
33
COLLET HOLDER for high-speed (CTH)
ANGLE HEAD
Fig. 1 C Fig. 2 C
D D
L1 L1
COLLET HOLDER
Imbalance L L
value(g・mm) N
P. 124
　BT40ーCTH20ー90 Fig. 3 Fig. 4 φ55

C C
D D
L1 21 L1
L L
M/C Tool
A63ーCTH20ー90
CODE Fig. φD L φC L1
for Turning Mill
BT30ーCTH10ー 45 1 2.4～10 45 36 23 0.5 2.6

ー 75 75 53 0.6 2.7
ーCTH20ー 60 5.8～20 60 50 38 4.3
ー 90 90 68 0.9 4.7
BT40ーCTH10ー 60
General Purpose
1 2.4～10 60 36 33 1.1 3.8

ー 90 90 63 1.3 4.0
Tool
ー120 120 93 1.4 4.4

ー150 150 123 1.6 4.6
ーCTH20ー 60 5.8～20 60 50 33 1.2 6.4
ー 90 90 63 1.4 7.0
ー120 120 93 1.7 7.3
JIG
ー150 150 123 2.0 7.6

ーCTH25ー 75 5.8～25 75 62 48 1.5 8.9
ー105 105 78 2.0 9.8
BT50ーCTH10ー105 1 2.4～10 105 36 67 3.8 5.3
ー135 135 97 4.0 5.7
Equipment
Measuring
ー165 165 127 4.1 6.1

ーCTH20ー105 5.8～20 105 50 67 4.2 8.3
ー135 135 97 4.6 9.0
ー165 165 127 4.9 9.4
Maintenance Tool
ーCTH25ー 75 5.8～25 75 62 37 3.8 10.3

ー105 105 67 4.4 11.0
ーCTH32ー 90 24.8～32 90 74 52 4.1 14.4
A40 ーCTH10ー 55 3 2.4～10 55 32 35 0.4 3.6
ー 75 75 55 0.5 3.9
Wire EDM fixture
ー 90 90 70 0.6 4.0
JIG Tool
ーCTH20ー 75 5.8～20 75 50 55 0.7 7.3

ー 90 90 70 0.8 7.0
ーCTH25ー 95 5.8～25 95 55 75 0.9 10.7
A50 ーCTH10ー 55 3 2.4～10 55 36 29 0.6 6.6
ー 75 75 49 0.7 6.9
Information
Technical
A50MーCTH20ー 80 5.8～20 80 50 54 0.9 10.2

ー105 105 79 1.2 11.1
ーCTH25ー105 5.8～25 62 1.3 14.7
34
ANGLE HEAD
A63 ーCTH10ー 75 3 2.4～10 75 36 49 0.9 10.2
ー 90 90 64 1.0 10.4
ー120 120 94 1.2 10.7
ー150 150 124 1.4 11.0
COLLET HOLDER
ーCTH20ー 90 5.8～20 90 50 64 1.2 14.1
ー120 120 94 1.5 14.0
ー150 150 124 1.9 14.9
ーCTH25ー105 5.8～25 105 62 79 1.6 17.1
A100ーCTH10ー135 3 2.4～10 135 36 106 2.7 25.1
ー165 165 136 2.9 25.4
ー225 4 225 175 3.4 26.0
ーCTH20ー135 3 5.8～20 135 50 106 3.2 28.5
ー165 165 136 3.6 29.5
M/C Tool
ー225 225 196 4.3 31.1
ーCTH25ー135 5.8～25 135 62 106 3.7 31.4
ー165 165 136 4.3 32.7

ー195 195 166 4.8 34.1
for Turning Mill

E32 ーCTH10ー 55 3 2.4～10 55 32 35 0.2 1.2
ーCTS10ー 50※ 2 50 26 30 0.9
E40 ーCTH10ー 55 3 2.4～10 55 32 34 0.4 1.4
E50 ーCTH10ー 60 3 2.4～10 60 36 34 0.7 2.1
ー 90 90 64 0.9 2.3
ーCTH20ー 75 5.8～20 75 50 49 3.8
General Purpose
F63 ーCTH10ー 60 3 2.4～10 60 36 34 0.9 2.2
Tool
ー 90 90 64 1.1 2.4
ーCTH20ー 75 5.8～20 75 50 49 3.9
DN40ADーCTH20ー 75 1 5.8～20 75 50 56 1.1 5.4
ー135 135 116 1.7 5.9
DIN
ーCTH25ー 75 5.8～25 75 62 56 1.4 7.2
DN50ADーCTH20ー105 1 5.8～20 105 50 70 3.6 9.1
ー165 165 130 4.4 9.9
JIG
DIN
ーCTH25ー105 5.8～25 105 62 70 3.8 10.9
■Option ■Caution
●Spring collet(Precison collet) →P.38 ●Spanner→P.38 ●Adjust screw→P.37 ●The undercut area of the A50M is different from the standards. Please be careful
●Retention knob ( BT ) →P.67 ●Adjustable torque wrench→P.38 to check for interference with the ATC arm.
●Coolant screw→P.39 ●SUKIMA nut→P.39 ●Collet remover→P.38 ●※CTS10 ＝ Collapsibility cannot be used. The collet can only chuck a tool of the
■Std. Access. reference diameter.
Equipment
Measuring
●Nut ( NUA-CTH ) →P.37 ●Coolant duct(Fixed) ( HSK-A ) →P.110 ●HSK-E and F shank don't come with a coolant duct and cannot be attached.
■Note
●Swing type coolant ducts are available upon request (HSK-A).
●Applicable for coolant-through methods →P.56
●Be sure to use precision-type spring collet.
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
35
COLLET HOLDER ( CTA )
ANGLE HEAD
Fig. 1 Fig. 2 C1
C C
D D
COLLET HOLDER
L1 L2 L1
L L
BT50ーCTA20ー135
Fig. 3 C Fig. 4 C
D1 D D1 D
L1 L L1 L
ST32TーCTA20ー90
M/C Tool
CODE Fig. φD L φC L1 L2 φC1

Kg
BT30ーCTA10ー 45 1 2.4～10 45 36 23 ーー 0.5

for Turning Mill
ー 75 75 53 0.7
ー105 105 83 0.9
ーCTA20ー 60 5.8～20 60 50 38 0.6
ー 90 90 68 0.9
BT40ーCTA10ー 60 1 2.4～10 60 36 33 ーー 1.1
ー 90 90 63 1.3
General Purpose
ー120 120 93 1.5

ー150 150 123 1.7
Tool
ー180 180 153 1.9

ー210 2 210 155 28 44 2.1
ーCTA20ー 60 1 5.8～20 60 50 33 ーー 1.1
ー 90 90 63 1.4
ー120 120 93 1.7
ー150 150 123 2.1
ー180 180 153 2.5
JIG
ー210 210 183 2.9

ーCTA25ー 75 5.8～25 75 62 48 1.2
ー105 105 78 1.6
ー135 135 108 2.0
ーCTA32ー105 24.8～32 105 74 78 1.8
BT50ーCTA10ー105 1 2.4～10 105 36 67 ーー 3.8
Equipment
Measuring
ー135 135 97 3.9

ー165 165 127 4.0
ー195 195 157 4.2
ー255 2 255 155 62 55 4.9
ー315 315 122 5.8
ーCTA20ー105 1 5.8～20 105 50 67 ーー 4.0
Maintenance Tool
ー135 135 97 4.4

ー165 165 127 4.8
ー195 195 157 5.2
ー255 2 255 180 37 65 6.3
ー315 315 97 7.7
ーCTA25ー 75 1 5.8～25 75 62 37 ーー 3.6
ー105 105 67 4.2
Wire EDM fixture
ー135 135 97 4.8

JIG Tool
ー165 165 127 5.4

ー195 195 157 6.0
ー255 255 217 7.2
ー315 2 315 225 52 70 8.7
ーCTA32ー 90 1 24.8～32 90 74 52 ーー 4.0
ー120 120 82 4.7
Information
ー150 150 112 5.4

Technical
ー180 180 142 6.1

ーCTA40ー 90 31.8～42 90 90 52 4.0
ー120 120 82 5.0
36
CODE Fig. φD L φC L1 φ D1 G
ANGLE HEAD
DN40ADーCTA20ー 75 1 5.8～20 75 50 56 ーー 1.1
ー135 135 116 1.9
DIN
ーCTA25ー 75 5.8～25 75 62 56 1.7
DN50ADーCTA20ー105 2 5.8～20 105 50 70 ーー 2.3
ー165 165 130 3.0
COLLET HOLDER
DIN
ーCTA25ー105 5.8～25 105 62 70 2.9
CT40 ーCTA20ー 75 1 .23～.79 2.95 1.97 2.20 ーー 2.65
T.
　　　　　　　　　　　　　ー135 5.31 4.57 3.75
CA
　　　　　　ーCTA25ー 75 .23～.98 2.95 2.44 2.20 3.09
CT50 ーCTA20ー105 1 .23～.79 4.13 1.97 2.68 7.94
　　　　　　　　　　　　　ー165 6.50 5.12 9.70
T.
CA
　　　　　　ーCTA25ー105 .23～.98 4.13 2.44 2.68 8.60
ST20TーCTA10 3 2.4～10 35 36 110 20 ーー
ST25TーCTA10 3 2.4～10 35 36 110 25 ーー
M/C Tool
ーCTA20 5.8～20 60 50
ST32TーCTA10ー 30 3 2.4～10 30 36 100 32 ーー
　　　　　　　　　　　　　ー 60 60

　　　　　　　　　　　　　ー 90 90
for Turning Mill

　　　　　　　　　　　　　ー120 120
　　　　　　ーCTA20ー 60 5.8～20 60 50
　　　　　　　　　　　　　ー 90 90
　　　　　　　　　　　　　ー120 120
ST42TーCTA25ー 90 3 5.8～25 90 62 110 42 ーー
　　　　　　　　　　　　　ー120 120
S 32　ーCTA10
General Purpose
4 2.4～10 30 36 70 32 ーー
　ーCTA20 5.8～20 60 50
Tool
S 42　ーCTA10 4 2.4～10 30 36 80 42 ーー
　ーCTA20 5.8～20 35 50
　ーCTA25 5.8～25 80 62
■Option ■Note
●Spring collet→P.38 ●Spanner→P.38 ●Retention knob(BT) →P.67 ●Applicable for coolant-through methods. Please contact us for more information.
●Adjustable torque wrench→P.38 ■Caution
■Std. Access. ●For precautions and maintenance, refer to page 122.
●Nut ( NUA-CTA )
JIG
Nut Adjust screw
The overhang of the cutting tool can be
The overhang of the cutting
adjusted.
tool can be adjusted.
Equipment
Measuring
Fig. 1 Fig. 2
K K
G
J G
Fig. 1 Fig. 2 Fig. 3 D
D J
Adjust screw
L1 L1
C C C
L
Maintenance Tool
H L
H H
CODE Fig. φC H Holder type CODE Fig. L φD L1 J K G Holder type

NUAーCTA10 1 36 18 CTA10 AJCーM14 1 22 10 8 1.5 3 M14×1.5 CTA10
ーCTA20 50 25 CTA20 ST25T－CTA20
ーCTA25 62 28.5 CTA25 ーM24 27 20 13 5 4 M24×1.5 CTA20 (※1)

ーCTA32 74 32 CTA32 BT40－CTA25－ 75
BT40－CTA32－105
Wire EDM fixture
ーCTA40 90 36 CTA40
ーM28 25 M28×1.5 CTA25 (※2)
JIG Tool
ーCTH10 2 36 18 CTH10
ーM18 24 15 8 M18×1.5 BT30－CTA20 ,
ーCTH20 50 25 CTH20 ST32T－CTA20
ーCTH25 62 28.5 CTH25
ーM18L 2 43 23 BT50－CTA32 , CTA40
ーCTH25ー55 55 CTH25 (A40)
※1 : Except BT30, H40, SE30M, ST25T and ST32T
ーCTH32 74 32 CTH32 ※2 : Except BT40−CTA25−75
ーCTH10ー32 32 18 CTH10 (A40, E32, E40)
ーCTS10 3 26 21 CTS10
Information
Technical
37
SPRING COLLET
ANGLE HEAD
H
( Clamping Length )
C10 D D1
C20
C25
COLLET HOLDER
C32 L
C40
CODE Holder Collapsi-

D ( Diameter ) L φD1 H
Standard Collet Precision Collet type bility
0.2 26 17.2 D＝2.6～5(Except 3,4) → 16

2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4
CTH10 3, 4, 5.2 ～ 5.8 → 18
4.6 4.8 5 5.2 5.4 5.6 5.8 6 6.2 6.4
C10-D CTA10 6 ～10 → 20
6.6 6.8 7 7.2 7.4 7.6 7.8 8 8.2 8.4
CTS10※
8.6 8.8 9 9.2 9.4 9.6 9.8 10
6 6.2 6.4 6.6 6.8 7 7.2 7.4 7.6 7.8 8 0.2 50 29.5 D＝ 6 ～ 9.8 → 32

8.2 8.4 8.6 8.8 9 9.2 9.4 9.6 9.8 10 10 ～15.8 → 35
M/C Tool
10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 16 ～20 → 40
Add “-P” after 11.8 12 12.2 12.4 12.6 12.8 13 13.2

CTH20
C20ーD the standard 13.4 13.6 13.8 14 14.2 14.4 14.6 14.8
CTA20
type item code. 15 15.2 15.4 15.6 15.8 16 16.2 16.4
16.6 16.8 17 17.2 17.4 17.6 17.8 18
for Turning Mill
18.2 18.4 18.6 18.8 19 19.2 19.4 19.6
〈 Example 〉 19.8 20
C10 ー 6 ー P
C25ーD 6 8 10 10.5 11 11.5 12 12.5 13 13.5 0.2 68 36.5 D＝ 6 ～ 8 → 38
14 14.5 15 15.5 16 16.5 17 17.5 18 CTH25 10 ～15 → 48
18.5 19 19.5 20 20.5 21 21.5 22 22.5 CTA25 15.5～20 → 54
23 23.5 24 24.5 25 20.5～25 → 57
CTH32 D＝25 ～28 → 66
C32ーD 25 28 30 32 0.2 80 46
General Purpose
CTA32 30 ～32 → 68

D＝32 ～40 → 65
Tool
C40ーD 32 40 42 CTA40 0.2 80 56

42 → 70
φD
CODE D Holder Collapsi- Ex. C10 - 6 - P
L φD1 H
Standard Collet ( Diameter ) type bility
1/4　5/16　3/8 CTA20 .008 1.97“ 1.16“ 1.14“
C20-D Highest Guaranteed Accuracies
7/16　1/2　 1.30“
5/8　3/4
1/4　5/16　3/8
1.57“
1.38“
Throughout Entire Chucking Range
CTA25 .008 2.67“ 1.44“
C25-D
7/16　1/2　 1.81“
JIG
5/8　3/4 2.12“
Collet Run-out accuracy（μm）
1IN 2.24“
Precision Collet 5
●Collet remover ●※CTS10 ＝ Collapsibility cannot be used.
The collet can only chuck a tool of the
Standard Collet 10
■Note
reference diameter. ※Accuracy of collet alone
●Please contact us if you need a size
that is not mentioned above, and we
Equipment
Measuring
will manufacture it for you (standard

D L
accuracy collets only).
D less than10 4×D
Spanner・ Wrench L
10　～20
20.5～42
40
60
Fig. 1 Fig. 2
R Spring collet standard set

Maintenance Tool
L L
Tightening
CODE Fig. Holder type R L
torque( kgf・m )
FCー32 1 CTH10 (A40, E32, E40) 16 120 4～6 C10ーA set
ー36 CTA10, CTH10 18 208
ー50 CTA20, CTH20 25 281 12 CODE Collet inner diameter Q'ty Holder type
ー55 CTH25 (A40) 27.5 284 15 C10ーA set 3, 4, 5, 6, 8, 10 6pcs. (1ea.) CTA10
ー62 CTA25, CTH25 31 312 C20ーA set 6, 8, 10, 12, 16, 20 CTA20
Wire EDM fixture
ー74 CTA32, CTH32 37 364 C25ーA set 6, 8, 10, 12, 16, 20, 25 7pcs. (1ea.) CTA25

ー90 CTA40 45
JIG Tool
RCー26 2 CTS10 ー 240 ー ■Std. Access.

●Collet remover（C10ーA set）
Adjustable torque wrench Collet remover

The nut-tightening torque can be adjusted more properly. The collet can be attached/
detached with ease.
Collet remover
Information
CODE Holder type

Technical
C10ーRM C10
Spanner for Adjustable Spring collet
Holder type C20ーRM C20
torque wrench torque wrench
CE-CTS10 CTS10
FCー36AW AWー1 CTA10, CTH10
ー50AW ー2 CTA20, CTH20 For collet holder nut
38
COOLANT-THROUGH SYSTEM
ANGLE HEAD
BT HSK
Coolant-through cutter SUKIMA through
CODE Retention knob with hole Coolant screw H SUKIMA nut
Retention knob with hole
BT30 ーCTH10ー 45 CSAーM14 22～38 NUBーCTH10
ー 75 22～68 Option→P.67
ーCTH20ー 60 ※1 ーーCTH20
ー 90
COLLET HOLDER
Coolant duct
BT40 ーCTH10ー 60 CSAーM14 22～54 NUBーCTH10
Standard accessories
ー 90 22～67
→P.110
ー120
ー150
ーCTH20ー 60 ーM24S 44～54 ーCTH20
ーM24L 36～46
ー 90 ーM24S 44～79
ーM24L 36～71
ー120 ーM24S 44～83
ーM24L 36～75
Model no. of
ー150 ーM24S 44～89
retention knob Coolant screw
ーM24L 36～81
depends on the
M/C Tool
ーCTH25ー 75 ーM24S 61～73 ーCTH25 Option
machine model.
ーM24L 53～65
ー105 ーM28　 61～80 H SUKIMA nut
BT50 ーCTH10ー105 ーM14　 22～49 NUBーCTH10 Option
ー135 22～67

ー165 Cutter with oil hole
for Turning Mill

ーM24S 44～81 ーCTH20
ーCTH20ー105 Cutter without oil hole
ーM24L 36～73
ーM24S 44～89
ー135
ーM24L 36～81
ーM24S 44～89
ー165
ーM24L 36～81
Coolant-through cutter SUKIMA through
ーCTH25ー 75 ーM28　 61～79 ーCTH25
ー105 61～89 *SUKIMA through =
General Purpose
ーCTH32ー 90 ※1 ーーCTH32 Coolant Around Tool
A40 ーCTH10ー 55 CD 40ー01 CSRー　14 21.7 NUBーCTH10
ー 75 CSAーM14　 22～ 24
Tool
ー 90 21～ 44
ーCTH20ー 75
ー 90
ー03
ー01
Unnecessary
CSAーM24S
53
41.9
ーCTH20 Coolant screw
ーCTH25ー 95 ー04 Unnecessary 72 ーCTH25 G
A50 ーCTH10ー 55 CD 50ー01 Unnecessary ー NUBーCTH10 d (Cutter shank)
ー 75 CSAーM14　 21～ 22
A50M ーCTH20ー 80 Unnecessary ーーCTH20 D1
D
ー105 CSAーM24S 42～ 47 L W
ー03 Unnecessary 80 ーCTH25
JIG
ーCTH25ー105
ー04※2 60
A63 ーCTH10ー 75 CD 63ー02 CP　ー　14M 21～ 28 NUBーCTH10 CODE D d L G W
ー 90 ー01 CSAーM14　 22～ 31 CSRー 14 3 4～10 14 ーー
ー120 22～ 52 CP ー 14M 7～10 53 M14×1.5 3
ー150 CSAーM14 2.4 4～10 26 2
ー03 Unnecessary 65 ーCTH20 CSAーM24S 7 10～20 30 M24×1.5 6
ーCTH20ー 90 CSAーM24L 3.4 6～12 38 3
ー04※2 44
Equipment
Measuring
ー01 CSAーM24S 44～ 54 CSAーM28 6 10～25 40 M28×1.5 5
ー120
ーM24L 36～ 46
ーM24S 44～ 77
ー150
ーM24L 36～ 69
ー03 Unnecessary 80 ーCTH25
ーCTH25ー105
ー04※2 59 SUKIMA nut
A100 ーCTH10ー135 CD100ー01 CSAーM14　 22～ 67 NUBーCTH10
ー165 L Smm2
Maintenance Tool
d (Cutter shank)
ー225 Clearance area
ーM24S 44～ 65 ーCTH20 C d1
ーCTH20ー135
ーM24L 36～ 57
ーM24S 44～ 89
ー165
ーM24L 36～ 81
CODE φC L φd φd1 S
ーM24S 44～ 89
ー225 NUBーCTH10ー 3.6 36 23 3 3.6 3.1
ーM24L 36～ 81
ー 4.5 4 4.5 3.3
ーCTH25ー135 ー02 ※1 ーーCTH25
ー 5.5 5 5.5 3.7
Wire EDM fixture
ー165 ー01 CSAーM28　 61～ 75

ー 6.4 6 6.4 3.9
ー195 61～105 ー 8.4 8 8.4 4.6
JIG Tool
CSAーM24S 44～ 69 ーCTH20 ー10.3 10 10.3 4.8

DN40ADーCTH20ー 75
ーM24L 36～ 61 ーCTH20ー 6.4 50 30 6 6.4 3.9
ーM24S 44～ 89 ー 8.4 8 8.4 4.6
ー135
ーM24L 36～ 81 ー10.3 10 10.3 4.8
Model no. of ーM24S 61～ 73 ーCTH25 ー12.3 12 12.3
ーCTH25ー 75
retention knob ーM24L 53～ 65 ー16.2 16 16.2 .1
5
depends on the ーM24S 44～ 89 ーCTH20 ー20.2 20 20.2 5.7
DN50ADーCTH20ー105 machine model. ーM24L 36～ 81 ーCTH25ー20.2 62 34.5
Information
ーM24S 44～ 89 ーCTH20 ー25.2 25 25.2 5.9

Technical
ー165
ーM24L 36～ 81 ーCTH32ー25.2 74 38
ーCTH25ー105 ーM28　 61～ 90 ーCTH25 ー32.1 32 32.1 6.0
■Note ●For information on the asterisked (※) coolant screw for the coolant-through cutter capability, please contact MST. ■Caution ●Only the reference cutter size can be used.
●A coolant duct is built into every tooling holder. However, the coolant ducts marked with ※2 are optional.
●Applicable for CTA type too. Please contact us for more information.
39
Hi-ART MILLING CHUCK
ANGLE HEAD
Needle-roller type chuck
The Hi-ART milling chuck achieves the accuracy,

rigidity and torque required of a milling chuck.
Ideal for use as the end-milling base holder.
Thanks to the shrinker, the

M/C Tool
cutter shank is chucked

Shrinker
evenly from the bottom
to the top of the gripping
range, ensuring high rigid-
ART
ity and gripping force.

for Turning Mill
coolant-through
Coolant- Nozzle-
Through through
Cutter
General Purpose
Tool
The shortest holder length Memory line clearly con- Keeps chips and coolant
is 85mm (BT40). firms tightness of the nut. out completely ng er Lo
The shorter holder length means increased Memory line clearly confirms tightness Dust-proof cover keeps chips li f e
rigidity. The rigidity of the tool holder is of the nut. and coolant out completely.
inversely proportional to the cube of the
length, meaning the deflection of this hold- Dust-proof cover
er is about half that of a 105mm holder.
JIG
Before After
tightening tightening Shut
Out!!
Memory line
Seal
85
Equipment
Measuring
Applicable for coolant-through version

Nozzle-through Coolant-Through Cutter
Maintenance Tool
Longer cutter life

using through-spindle
30° 30° capability P. 123
set screw
Wire EDM fixture
(Commercial item)
Nozzle (Option)
( BT40 / A63 …M4
)
JIG Tool
P. 42 BT50 / A100…M6
Applicable as a base holder for various applications
SLIMLINE Straight DTA CTA MFA MBH45 FMA MTA SCA JTA
straight collet DTB
Information
Technical
arbor
40
Hi-ART MILLING CHUCK (ART)
ANGLE HEAD
Dust-proof
Fig. 1 Fig. 2 cover C
C
D D

L1
L L
BT50ーART32ー105
Dust-proof
Fig. 3 C Fig. 4 cover C
D D
M/C Tool
L1 L
L
A100ーART32ー135

for Turning Mill
Cutter insertion MAX.
length Kg min-1
BT40ーART32ー 85 1 32 85 72 37 66～ 88 1.9 6,000

ー 95 95 47 2.1
ー105 105 57 2.3
General Purpose
ー135 135 87 3.0
BT50ーART32ー105
Tool
2 32 105 82 ー 66～ 98 5.1 5,000
ー135 135 6.4
ー165 165 7.7
ー180 180 8.4
ーART42ー105 42 105 97 76～108 5.4 3,000
ー135 135 7.1
A50MーART32ー100 3 32 100 72 44 66～ 71 1.7 6,000
JIG
A63 ーART32ー100 3 32 100 72 44 71 2.0 6,000
A100ーART32ー135 4 32 135 82 ー 66～ 98 5.3 5,000
ーART42ー135 42 97 76～ 98 6.1 3,000
● Straight collet→P.42 ●Nozzle→P.42 ●Spanner with ejection hook→P.42 ● For BT40 type, the outer diameter of the nut is larger than that of the V-flange.
Equipment
Measuring
● Adjust screw→P.42 ●Retention knob(BT)→P.67 Therefore, pay close attention to possible interference with the ATC arm.
●When using the straight arbor in BT40, use the S type (ex.S32-CTA10).
■Std. Access.
● For A50M and A63, the coolant-through system is not available for straight collets.
● Coolant duct (Fixed)( HSK-A ) →P.110
● Cutter-through coolant is not available for straight collets.
■Note ● For precautions and maintenance, refer to page 122.
●To utilize the coolant-through nozzle capability, the retention knob with hole and
nozzle are required.

●Swing type coolant ducts are available upon request(HSK-A). Maintenance Tool
Increased rigidity with the Face Lock system

For face milling applications, combining a holder and
a face mill arbor, with backup screw (ST32B, ST42B-
Wire EDM fixture
FMA), will achieve strong gripping (Face Lock) and

improve the rigidity during transverse feed milling.
JIG Tool
Backup screw
ST32B / 42B
Face mill arbor
Information
Technical
Face Lock
41
Straight collet
ANGLE HEAD
Standard type CODE

φD L φD1 H Holder type
Standard type F type
S32ー 6 S32ー 6F 6 75 32 30～68 ART32
ー 8 ー 8F 8
ー10 ー10F 10 40～68
Hi-ART MILLIMG CHUCK
Ftype Notch for nozzle ー12 ー12F 12

ー16 ー16F 16 50～68
ー20 ー20F 20
ー25 ー25F 25 55～68
S42ー 6 S42ー 6F 6 80 42 30～73 ART42
ー 8 ー 8F 8
H 120° ー10 ー10F 10 45～73
(Cutter insertion length) 8.5 ー12 ー12F 12
ー16 ー16F 16 50～73
ー20 ー20F 20
M/C Tool
D1 D ー25 ー25F 25 55～73

ー32 ー32F 32 60～73
L Standard type F type
■Caution
Adjust stopper ●Remove the adjust stopper when using a straight collet with A50M/ A63.
for Turning Mill
●When a straight collet with nozzles is used, use the F type.

■Std. Access.
●Adjust stopper
Spanner with ejection hook Nozzle

This spanner can be used to both tighten a nut and remove
General Purpose
±30°
a straight collet.
D
Tool
G L W
L CODE L G W φD Shank type Q’ty

R
NOZーM4ー12 6.3 M4 4.5 1.2 BT40, A50M, 12pcs.
ー60 A63 60pcs.
Clamping ーM6ー12 8.5 M6 7 1.8 BT50, 12pcs.
CODE R L Holder type
torque( kgf・m ) ー60 A100 60pcs.
FMー72 36 204 ART32 ( BT40, A50M, A63 ) 6
ー82 41 234 ART32 ( BT50, A100 ) 7 ■Std. Access.
● Wrench for attachment
JIG
ー97 48.5 239 ART42 ( BT50, A100 )
Adjust screw
The overhang of the cutting tool can be adjusted.
Equipment
Measuring
M18×1.5 8
The overhang of the cut-
23 ting tool can be adjusted.
5
L
CODE L Shank type Qʼty

Maintenance Tool
AJNーM18L 38 BT40, A63 Adjust screw

5pcs.
AJNーM18 63 BT50, A100
Cutting data
Wire EDM fixture
JIG Tool
S55C S55C
φ32 roughing φ 32 roughing
end mill 4 flutes end mill 4 flutes
N 350 min-1 N 350 min-1

Information
Technical
fz 0.11 mm/t fz 0.13 mm/t

32
20
32 32
BT40-ART32-85 BT50-ART32-105
42
SUMMIT
ANGLE HEAD
End-mill holder for ultra-heavy duty application
coolant-through
The ace for heavy-duty cutting!
The set screw holder that doesn’t need
SUMMIT
a whistle notch. Nozzle-through
Accuracy → Less than 20μm / 100L

Gripping power → 400kgf・m (φ42)
SLZ Round shank
M/C Tool
for Turning Mill
φ 25, 32, 42
Straight Shank
Whistle notch
End-mill
General Purpose
end mill
Tool
Adjustable projection of cutting tool Applicable for coolant-through version (A100)
Our original tightening pad system allows a round shank, Nozzle-through
as well as a whistle notch shank end mill, to be used. The
projection of the cutting tool, which is critical for heavy-duty
cutting, can be made as short as possible.
JIG
Tightening pad
Equipment
Measuring
Longer cutter life
using through-
spindle capability
Shortest P. 123
length
Sufficient
Maintenance Tool
thickness
28mm
Applicable to high-speed cutting

Wire EDM fixture
Pre-balanced design High accuracy thanks to its eccentric bore design

JIG Tool
Cutting tool mounting

hole center
Eccentricity
Information
Technical
Center of holder
43
SUMMIT (SLZ)
ANGLE HEAD
H1 H1
Fig. 1 Fig. 2
H G C1 C H G C
D
SUMMIT
L1 L1
L
L
BT50ーSLZ32ー105
Fig. 3 H1
H G C1 C
D
M/C Tool
L1
L
A100ーSLZ32－135
CODE Fig. φD L L1 φC φC1 H H1 G Kg

for Turning Mill
BT50ーSLZ25ー 90 1 25 90 ー 66 ー 45 70 4ーM12 4.6

ー120 120 45 75 5.6
ー150 150 6.5
ーSLZ32ー105 32 105 ー 88 ー 65 100 6ーM16 5.9
ー135 135 62 95 7.5
General Purpose
ー165 165 9.1

ーSLZ42ー105 42 105 ー 98 ー 70 110 6.1
Tool
ー135 135 7.8

ー165 165 9.5
A100ーSLZ25ー135 2 25 135 66 66 75 45 70 4ーM12 4.9
ーSLZ32ー135 3 32 88 88 ー 65 100 6ーM16 6.1
ーSLZ42ー135 42 98 98 70 6.6
JIG
■Option ■Note
●Wrench ●Adjust screw ( BT50 ) ●Nozzle ( HSK-A100 ) ●Retention knob( BT50 )→P.67 ●Swing type coolant ducts are available upon request(HSK-A).
■Std. Access. For details, please contact us.
●Coolant duct (Fixed) ( HSK-A100 ) →P.110 ■Caution
●If the dedicated wrench is not used, use a wrench with a minimum
handle length of 30 cm for the M16 or 20 cm for the M12.
Equipment
Measuring
Wrench Nozzle Adjust screw

L 7
The overhang of the cutting tool can be adjusted.
±30° CODE Shank type Q’ty
1.8 AJCーM18L BT50 5pcs.
M6 8.5
B
Maintenance Tool
43 The overhang of the cutting

Holder Tightening CODE Q’ty
CODE
type
B L
torque( kgf・m ) 8 tool can be adjusted.
NOZーM6ー12 12pcs.
Wー206 SLZ25 6 200 　4 ー60 60pcs. 23
SLZ32 5
ー308 8 300 10 ■Std. Access.
SLZ42 M18×1.5
●Wrench for attachment
Adjust screw
Cutting data
Wire EDM fixture
JIG Tool
A2017 S50C S50C

φ38 end mill φ40 roughing φ45 roughing
4 flutes end mill 6 flutes end mill 6 flutes
N 5000 min-1 N 280 min-1 N 190 min-1

F 5000 mm/min F 168 mm/min F 114 mm/min
V 597 m/min V 35 m/min V 25 m/min
Information
Technical
55 fz 0.25 mm/t fz 0.1 mm/t fz 0.1 mm/t

50 55
4 40 45
BT50-SLZ32-105 BT50-SLZ32-105 BT50-SLZ42-105
44
The solution for high-efﬁcient
ANGLE HEAD
machining of deep cavity application.
1 FMH RIGID TYPE

with a solid carbide core
P. 46
Ideal for heavy duty roughing application at shallow and deep machining
Roughing
using a face milling arbor with a large size solid carbide core.
-
t y rough
y du on
Heav pplicati
0
ing a
160
40
[6.3"]
X.
MA
M/C Tool
400
[15.7"] Large
size solid
carbide

for Turning Mill
φ50～100
( FMH standard )
2 RED SCREW ARBOR P. 48
General Purpose
for Indexable end-mills
Tool
Less vibration at a corner and pocket machining g
terin
Semi-finishing
thanks to a solid design using a carbide shaft. hat

No c
RSG
5 0
FMH
JIG
26 .40
X
MA
Long
X.
MA
Long
Carbide
Equipment
Measuring
φ16～40
( Indexable cutter )
3
Maintenance Tool
Superior Accessibility.
hing
Finishing
Slim tip design of Curve minimizes cutter s

projection. f ini
rior
Supe ur face.
s
Wire EDM fixture
5
JIG Tool
29
X.
Thick
MA
Information
Short
Technical
Slim

φ4～20 information, please contact
( Carbide cutter ) MST and ask for a copy of our
specialty catalog.
45
ed
FMH RIGID
and
exp any
type i e s m
S er clu d e g t h s.
ANGLE HEAD
to in ent l en
er
with a solid carbide core di f f
Achieves higher efficiency during long

gauge length machining.
FMH RIGID type
FMH强力型
Achieves stable machining during long,
continuous operation.
FMH-H
Machining efficiency 2 times（Compared to
conventional holders）
M/C Tool
oy
Thick body shrinks
all
～6
strongly around
de
=3
the carbide core
bi
D
for Turning Mill
L/
ar
.C
RIGID
a
di
e
rg
La
coolant-through
General Purpose
Under-cut design makes it

Ideal for vertical wall cutting
Tool
φ50~100(FMH standard)
JIG
Large dia. Carbide alloy FMH standard

The large-diameter carbide core is Available for FMH standard cutting tools that supplies coolant to
integrated into the thick body by shrink- the cutting edge properly.
fitting. Achieves less deflection and
higher efficiency during long-gauge Works with these manufacturers’ cutting tools
Equipment
Measuring
machining. Vibration-free machining OSG KYOCERA DIJET INDUSTRIAL Tungaloy

leads to longer insert life and achieves MITSUBISHI MATERIALS Mitsubishi Hitachi Tool Engineering
stable machining during long and
continuous operation.
Comparison test
Maintenance Tool
Thickness Cutting depth ap (mm) 0.5 1.0 1.5 2.0

Carbide alloy
FMH RIGID type
Even greater efficiency! BT50-FMH22-60-315H
Shorter and longer gauge length models

added to our current line up. Ideal for
deep cavity mold applications. Makes
Conventional
×
Wire EDM fixture
Chattering Double the Machining

BT50-FMH22-60-300
more efficient roughing possible. efficiency
JIG Tool
● Application Shouldering
● Material S50C (Raw material)
● Cutting speed 220 m/min ( S1,112 min -1)
d ● Feed rate 1,112 mm/min
nd e
s expa any
ie m
110
S er clu d e g t h s. Cutter dia. Φ 63
to in ent l en 4-flutes
er
Information
di f f
Round insert Effective
Technical
360
ap length
310 mm
44
46
FMH RIGID type with a solid carbide core (FMH-H)
ANGLE HEAD
Fig. 1 L
M Clamp bolt
FMH standard D C
D G
FMH强力型
FMH RIGID type

Carbide
d W
A100ーFMH22ー47ー265Ｈ
L K
Fig. 2
H
nd ed
i e s expa any
Ser e m s.
clu d h D C Clamp bolt
to in nt l eng t
e r e
di f f
Carbide
M/C Tool
CODE Fig. Cutter dia. ΦＤ L Ｍ ΦＣＨＷＫ Φd G Clamp bolt Moment
kgf • m

BT50ーFMH22 ー47ー165Ｈ 1 50 / 52 22 165 110 47 18 10 5 3 Ｍ10 5.7 Ｍ10 ※ 0.1
for Turning Mill

ー215Ｈ 215 160 6.5 0.2
ー265Ｈ 265 210 7.3 0.3
ー315Ｈ 315 260 8.2 0.6
ー365Ｈ 365 310 9.0 0.8
ー60ー165Ｈ 63 / 66 165 110 60 6.9 0.2
ー215Ｈ 215 160 8.1 0.3
General Purpose
ー265Ｈ 265 210 9.3 0.6
Tool
ー315Ｈ 315 260 10.7 1.0
ー365Ｈ 365 310 11.9 1.3
ー415Ｈ 415 360 13.1 1.7
ーFMH31.75ー76ー215Ｈ 80 31.75 215 160 76 30 12.7 7 4 M16 10.6 MBF-M16 0.6
ー265Ｈ 265 210 12.7 1.0
ー315Ｈ 315 260 15.3 1.5
JIG
ー365Ｈ 365 310 17.6 2.3
A100ーFMH22 ー47ー165Ｈ 1 50 / 52 22 165 110 47 18 10 5 3 Ｍ10 4.2 Ｍ10 ※ 0.1
ー215Ｈ 215 160 5.1 0.3
ー265Ｈ 265 210 5.9
ー315Ｈ 315 260 6.8 0.6
Equipment
ー365Ｈ 365 310 7.6 0.8
Measuring
ー60ー165Ｈ 63 / 66 165 110 60 5.9 0.2
ー215Ｈ 215 160 7.2 0.5
ー265Ｈ 265 210 8.4 0.7
ー315Ｈ 315 260 9.8 1.1
ー365Ｈ 365 310 11.1 1.4
Maintenance Tool
ー415Ｈ 415 360 12.4 1.8

ーFMH31.75ー76ー215Ｈ 80 31.75 215 160 76 30 12.7 7 4 M16 9.7 MBF-M16 0.7
ー265Ｈ 265 210 11.8 1.2
ー315Ｈ 315 260 14.0 1.7
ー365Ｈ 365 310 16.3 2.4
ー96ー250Ｈ 2 100 2 50 ー 96 13.6 1.3
Wire EDM fixture
300Ｈ 300 16.3 2.0

JIG Tool
350Ｈ 350 17.4 2.6

■Option
● Retention knob ( BT50 ） →P.67
Available for
■Std. Access.
● Coolant duct(Fixed) ( HSK - A100 ) →P.110 Clamp bolt (unless marked with in the list) ● Stopper key
●
DIN/ CAT.
■Note
●
Swing type coolant ducts are available upon request(HSK-A). For details, please contact us.
Information
Technical
● The clamp bolt marked with ※ in the list is a hexagonal socket bolt.
Use a market standard bolt.

● Contact us to find out what manufacturers' cutters can be used with this product.
■Caution
● The required clamp bolt design depends on the cutter manufacturer and the type of cutter.
47
d
nd e
xpa any
RED SCREW arbor s e m
ie e
S e r inclu d e f f e c t iv
ANGLE HEAD
to rent e s.
e h
The arbor for Indexable End Mill di f f l eng t
Displaying the highest cutting

performance of any indexable end mill !
RED screw arbor
Highly rigid design makes the best use of carbide

alloy properties ( high Young's modulus ).
Ideal for deep standing-wall machining.
RSG
M/C Tool
Carbide
integral
type
for Turning Mill
Carbide alloy
coolant-through Carbide
Under-cut design
General Purpose
Indexable tool
Tool
Works with these manufacturers' tools
M 8
JIG
OSG KYOCERA SUMITOMO DIJET TUNGALOY Mitsubishi

~
M16 ELECTRIC Materials
Mitsubishi Hitachi ISCAR Sandvik Seco Tools TaeguTec

Equipment
Tool Engineering
Measuring
Many effective lengths for machining Machining example

RED screw arbor A general holder +A steel shank
BT50-RSG12-215-M100
Maintenance Tool
φ45 φ82
Carbide
integral type Steel
25 Effective
135 135
50 length for
Deflection Deflection
machining
75 （M）
amount amount
100 1μm 3μm
Wire EDM fixture
Series expanded 125

JIG Tool
to include many 150 7

6
7
6
different effective 175 ae 5 ae 5
lengths. (mm) 4 (mm) 4
200 3 3
225 2 2
1 1
Deep standing-wall
Heavy cutting
machining 60 90 120 150 180 60 90 120 150 180
V (m/min) V (m/min)
Information
Technical
Excellent Cutting 2-flutes end-mill

φ25
Chattering condition Climb milling
6 mm Feed： 0.1mm/tooth
ae Material ： S50C
48
RED SCREW arbor (RSG)
ANGLE HEAD
C1 C
Available for
BT C2 ■Option DIN/ CAT.
●Retention knob→ P.67
■Caution
●Some of the indexable end mills cannot be attached
to the RED screw arbor. Please check your indexable
RED screw arbor

end mills for conformance to the dimensions, or please
5 contact MST.
L1 M ●Because cutting resistance is greater than the tool holder
connection force associated with the machine spindle,
L please reduce the recommended cutting conditions by
50% for the RED screw arbors marked with ※.
Otherwise, the tool holder shank may experience
fretting corrosion or fall out of the machine spindle.
H
S The rigidity value
10
S
A rigidity value represents the amount of deflection for the

BT50ーRSG16ー400ーM225
BT50 G H1 entire holder and tool when a bending load of 1 kgf (9.8 N)
ed
and is applied to the tip of the tool. The smaller the numerical
s exp many value is, the higher the rigidity and the more accurate the
M/C Tool
i e e e
S e r inclu d f f e c t iv machining.
1kg (9.8N)
to rent e s. D
e h
di f f l eng t
S (μm)
Dimensions for the indexable

end mill mounting.
for Turning Mill

CODE G φD H H1 φC L M L1 φC1 φC2
S
kg
BT40ーRSG 8ー105ーM 25 M 8 8.5 18 6.5 15 105 25 80 30 32 1.4 0.6

ー135ーM 25 135 110 1.8 0.7
ー165ーM 25 165 140 2.1 0.8
General Purpose
ー130ーM 50 130 50 80 1.4 1.5
ー160ーM 50 160 110 1.8 1.7
Tool
ー190ーM 50 190 140 2.1 1.8
ー155ーM 75 155 75 80 1.5 3.1
ー185ーM 75 185 110 1.9 3.4
ー215ーM 75 215 140 2.2 3.5
ー170ーM 90 170 90 80 1.5 4.5
ー200ーM 90 200 110 1.9 4.8
JIG
ー230ーM 90 230 140 2.2 4.9
ー185ーM105 185 105 80 1.6 6.2
ー215ーM105 215 110 2.0 6.7
ー245ーM105 245 140 2.3 6.8
BT40ーRSG10ー125ーM 25 M10 10.5 22 6.5 19 125 25 100 36 38 1.8 0.4
Equipment
Measuring
ー155ーM 25 155 130 2.2 0.5
ー185ーM 25 185 160 2.4 0.7
ー150ーM 50 150 50 100 1.9 0.8
ー180ーM 50 180 130 2.3 1.0 Maintenance Tool
ー210ーM 50 210 160 2.5 1.2
ー175ーM 75 175 75 100 2.0 1.6
ー205ーM 75 205 130 2.4 1.8
ー235ーM 75 235 160 2.6 2.0
ー200ーM100 200 100 100 2.0 2.7
ー230ーM100 230 130 2.4 3.0
Wire EDM fixture
ー260ーM100 260 160 2.6 3.3

JIG Tool
ー220ーM120 220 120 100 2.1 4.0

ー250ーM120 250 130 2.5 4.3
ー280ーM120 280 160 2.7 4.6
BT40ーRSG12ー125ーM 25 M12 12.5 22 6 24 125 25 100 43 45 2.0 0.3
ー155ーM 25 155 130 2.4 0.4
ー185ーM 25 185 160 2.7 0.5
Information
Technical
ー150ーM 50 150 50 100 2.1

ー180ーM 50 180 130 2.5 0.7
ー210ーM 50 210 160 2.8 0.9
49
S
ANGLE HEAD
kg
BT40ーRSG12ー175ーM 75 M12 12.5 22 6 24 175 75 100 43 45 2.3 0.9

ー205ーM 75 205 130 2.7 1.1
ー235ーM 75 235 160 3.0 1.3
ー200ーM100 200 100 100 2.4 1.4
RED screw arbor
ー230ーM100 230 130 2.8 1.6

ー260ーM100 260 160 3.1 1.9
ー225ーM125 225 125 100 2.6 2.1
ー255ーM125 255 130 3.0 2.4
ー285ーM125 285 160 3.3 2.8
BT40ーRSG16ー125ーM 25 M16 17 25 6 29 125 25 100 52 54 2.6 0.2
ー150ーM 50 150 50 2.8 0.3
ー175ーM 75 175 75 3.0 0.5
M/C Tool
ー200ーM100 200 100 3.2 0.8

ー225ーM125 ※ 225 125 3.4 1.2
BT50ーRSG 8ー120ーM 25 M 8 8.5 18 6.5 15 120 25 95 30 32 4.0 0.6
ー150ーM 25
150 125 4.3 0.7

for Turning Mill
ー180ーM 25 180 155 4.8

ー145ーM 50 145 50 95 4.0 1.5
ー175ーM 50 175 125 4.3 1.7
ー205ーM 50 205 155 4.8
ー170ーM 75 170 75 95 4.1 3.1
ー200ーM 75 200 125 4.4 3.4
General Purpose
ー230ーM 75 230 155 4.9 3.4

Tool
ー185ーM 90 185 90 95 4.1 4.4

ー215ーM 90 215 125 4.4 4.8
ー245ーM 90 245 155 4.9
ー200ーM105 200 105 95 4.2 6.2
ー230ーM105 230 125 4.5 6.6
ー260ーM105 260 155 5.0
BT50ーRSG10ー140ーM 25
JIG
M10 10.5 22 6.5 19 140 25 115 36 38 4.3 0.4

ー170ーM 25 170 145 4.6 0.5
ー200ーM 25 200 175 5.6
ー165ーM 50 165 50 115 4.4 0.8
ー195ーM 50 195 145 4.7 0.9
Equipment
Measuring
ー225ーM 50 225 175 5.7 1.0

ー190ーM 75 190 75 115 4.5 1.6
ー220ーM 75 220 145 4.8 1.7
ー250ーM 75 250 175 5.8 1.8
ー215ーM100 215 100 115 4.5 2.7
Maintenance Tool
ー245ーM100 245 145 4.8 2.9

ー275ーM100 275 175 5.8
ー235ーM120 235 120 115 4.6 3.9
ー265ーM120 265 145 4.9 4.2
ー295ーM120 295 175 5.9
ー255ーM140 255 140 115 4.7 5.5
Wire EDM fixture
ー285ーM140 285 145 5.0 5.8

JIG Tool
ー315ーM140 315 175 6.0

BT50ーRSG12ー140ーM 25 M12 12.5 22 6 24 140 25 115 43 45 4.6 0.2
ー170ーM 25 170 145 5.0 0.3
ー200ーM 25 200 175 5.8 0.4
ー165ーM 50 165 50 115 4.7 0.5
Information
ー195ーM 50 195 145 5.1 0.6

Technical
ー225ーM 50 225 175 5.9
50
S
ANGLE HEAD
kg
BT50ーRSG12ー190ーM 75 M12 12.5 22 6 24 190 75 115 43 45 4.9 0.8

ー220ーM 75 220 145 5.3 1.0
ー250ーM 75 250 175 6.1
ー215ーM100 215 100 115 5.0 1.3
RED screw arbor

ー245ーM100 245 145 5.4 1.5
ー275ーM100 275 175 6.2 1.6
ー240ーM125 240 125 115 5.2 2.1
ー270ーM125 270 145 5.6 2.3
ー300ーM125 300 175 6.4 2.4
ー265ーM150 265 150 115 5.3 3.0
ー295ーM150 295 145 5.7 3.3
ー325ーM150 325 175 6.5 3.4
M/C Tool
ー290ーM175 290 175 115 5.5 4.2
ー320ーM175 320 145 5.9 4.6
ー350ーM175 350 175 6.7

BT50ーRSG16ー140ーM 25 M16 17 25 6 29 140 25 115 52 54 4.8 0.2
for Turning Mill

ー170ーM 25 170 145 5.4
ー200ーM 25 200 175 6.6
ー165ーM 50 165 50 115 5.0 0.3
ー195ーM 50 195 145 5.6 0.4
ー225ーM 50 225 175 6.8
General Purpose
ー190ーM 75 190 75 115 5.3 0.5
ー220ーM 75 220 145 5.9 0.6
Tool
ー250ーM 75 250 175 7.0
ー215ーM100 215 100 115 5.5 0.7
ー245ーM100 245 145 6.1 0.9
ー275ーM100 275 175 7.2
ー240ーM125 240 125 115 5.7 1.1
ー270ーM125 270 145 6.3 1.3
JIG
ー300ーM125 300 175 7.4
ー265ーM150 265 150 115 5.9 1.6
ー295ーM150 295 145 6.5 1.8
ー325ーM150 325 175 7.7
ー290ーM175 290 175 115 6.1 2.2
Equipment
Measuring
ー320ーM175 320 145 6.7 2.4
ー350ーM175 350 175 7.9 2.5
ー315ーM200 315 200 115 6.3 3.0
ー345ーM200 345 145 6.9 3.2 Maintenance Tool
ー375ーM200 375 175 8.1 3.3
ー340ーM225 340 225 115 6.5 3.9
ー370ーM225 370 145 7.1 4.1
ー400ーM225 400 175 8.3 4.2
　
Wire EDM fixture
JIG Tool
Information
Technical
51
■Std. Access.
●Coolant duct(Fixed type) → P.67
-A ■Note
HSK
ANGLE HEAD
C1 C ● Swing type coolant ducts are available upon
request(HSK-A). For details, please contact us.

C2
■Caution
●Some of the indexable end mills cannot be attached
to the RED screw arbor. Please check your indexable
end mills for conformance to the dimensions, or
please contact MST.
5 ●Because cutting resistance is greater than the
tool holder connection force associated with the
RED screw arbor
L1 M
machine spindle, please reduce the recommended
L cutting conditions by 50% for the RED screw arbors
marked with ※. Otherwise, the tool holder shank
S may experience fretting corrosion or fall out of the
machine spindle.
A63ーRSG10ー175ーM75
A63
H S
10
The rigidity value
A rigidity value represents the amount of deflection for
ed
and G H1 the entire holder and tool when a bending load of 1 kgf
e s exp many (9.8 N) is applied to the tip of the tool. The smaller the
i e
S e r inclu d e f f e c t iv numerical value is, the higher the rigidity and the more
to rent e s. accurate the machining.
e h
di f f l eng t D 1kg (9.8N)
M/C Tool
S (μm)
Dimensions for the indexable
end mill mounting.
S
CODE G φD H H1 φC L M L1 φ C1 φC2
kg
for Turning Mill
A63ーRSG 8ー105ーM 25 M 8 8.5 18 6.5 15 105 25 80 30 32 1.3 0.6

ー135ーM 25 135 110 1.4 0.7
ー165ーM 25 165 140 1.9 0.8
ー130ーM 50 130 50 80 1.3 1.5
General Purpose
ー160ーM 50 160 110 1.4 1.7

ー190ーM 50 190 140 1.9
Tool
ー155ーM 75 155 75 80 1.4 3.1

ー185ーM 75 185 110 1.5 3.4
ー215ーM 75 215 140 2.0
ー170ーM 90 170 90 80 1.4 4.4
ー200ーM 90 200 110 1.5 4.8
JIG
ー230ーM 90 230 140 2.0 4.9

ー185ーM105 185 105 80 1.5 6.2
ー215ーM105 215 110 1.6 6.6
ー245ーM105 245 140 2.1 6.7
Equipment
Measuring
A63ーRSG10ー125ーM 25 M10 10.5 22 6.5 19 125 25 100 36 38 1.6 0.4

ー155ーM 25 155 130 1.9 0.5
ー185ーM 25 185 160 2.3 0.6
ー150ーM 50 150 50 100 1.7 0.8
Maintenance Tool
ー180ーM 50 180 130 2.0 1.0

ー210ーM 50 210 160 2.4 1.2
ー175ーM 75 175 75 100 1.8 1.6
ー205ーM 75 205 130 2.1 1.8
ー235ーM 75 235 160 2.5 2.0
ー200ーM100 200 100 100 1.8 2.7
Wire EDM fixture
ー230ーM100
JIG Tool
230 130 2.1 2.9

ー260ーM100 260 160 2.5 3.2
ー220ーM120 220 120 100 1.9 4.0
ー250ーM120 250 130 2.2 4.2
ー280ーM120 280 160 2.6 4.5
Information
Technical
ー240ーM140 240 140 100 2.0 5.6

ー270ーM140 270 130 2.3 5.9
ー300ーM140 300 160 2.7 6.2
52
S
ANGLE HEAD
kg
A63 ーRSG12ー125ーM 25 M12 12.5 22 6 24 125 25 100 43 45 1.9 0.3

ー155ーM 25 155 130 2.3 0.4
ー185ーM 25 185 160 2.7 0.5
ー150ーM 50 150 50 100 2.0
ー180ーM 50 180 130 2.4 0.6
RED screw arbor

ー210ーM 50 210 160 2.8 0.8
ー175ーM 75 175 75 100 2.2 0.9
ー205ーM 75 205 130 2.6 1.0
ー235ーM 75 235 160 3.0 1.3
ー200ーM100 200 100 100 2.3 1.4
ー230ーM100 230 130 2.7 1.6
ー260ーM100 260 160 3.1 1.9
ー225ーM125 225 125 100 2.5 2.1
M/C Tool
ー255ーM125 255 130 2.9 2.4
ー285ーM125 285 160 3.3 2.7
ー250ーM150 250 150 100 2.6 3.1

ー280ーM150 280 130 3.0 3.4
for Turning Mill

ー310ーM150 310 160 3.4 3.8
A63 ーRSG16ー140ーM 25 M16 17 25 6 29 140 25 115 52 54 2.6 0.2
ー165ーM 50 165 50 2.8 0.4
ー190ーM 75 190 75 3.0 0.6
ー215ーM100 215 100 3.2 0.9
ー240ーM125 ※ 240 125 3.4 1.3
General Purpose
ー265ーM150 ※ 265 150 3.7 1.9
ー290ーM175 ※ 290 175 3.9 2.5
Tool
A100ーRSG 8ー120ーM 25 M 8 8.5 18 6.5 15 120 25 95 30 32 2.6 0.6
ー150ーM 25 150 125 2.9 0.8
ー180ーM 25 180 155 3.4
ー145ーM 50 145 50 95 2.6 1.5
ー175ーM 50 175 125 2.9 1.7
ー205ーM 50 205 155 3.4
JIG
ー170ーM 75 170 75 95 2.7 3.1
ー200ーM 75 200 125 3.0 3.4
ー230ーM 75 230 155 3.5
ー185ーM 90 185 90 95 2.7 4.5
ー215ーM 90 215 125 3.0 4.9
Equipment
Measuring
ー245ーM 90 245 155 3.5 4.8
ー200ーM105 200 105 95 2.8 6.3
ー230ーM105 230 125 3.1 6.7
ー260ーM105 260 155 3.6 6.6
A100ーRSG10ー140ーM 25 M10 10.5 22 6.5 19 140 25 115 36 38 3.1 0.4 Maintenance Tool
ー170ーM 25 170 145 3.5 0.5
ー200ーM 25 200 175 4.4
ー165ーM 50 165 50 115 3.2 0.8
ー195ーM 50 195 145 3.6 1.0
ー225ーM 50 225 175 4.5
ー190ーM 75 190 75 115 3.3 1.6
ー220ーM 75 220 145 3.7 1.8
Wire EDM fixture
ー250ーM 75 250 175 4.6

JIG Tool
ー215ーM100 215 100 115 3.3 2.7

ー245ーM100 245 145 3.7 2.9
ー275ーM100 275 175 4.6 2.9
ー235ーM120 235 120 115 3.4 4.0
ー265ーM120 265 145 3.8 4.2
Information
ー295ーM120 295 175 4.7

Technical
ー255ーM140 255 140 115 3.5 5.6

ー285ーM140 285 145 3.9 5.8
ー315ーM140 315 175 4.8
53
S
ANGLE HEAD
kg
A100ーRSG12ー140ーM 25 M12 12.5 22 6 24 140 25 115 43 45 3.4 0.3

ー170ーM 25 170 145 3.7 0.4
ー200ーM 25 200 175 4.7
ー165ーM 50 165 50 115 3.5 0.5
RED screw arbor
ー195ーM 50 195 145 3.8 0.6

ー225ーM 50 225 175 4.8
ー190ーM 75 190 75 115 3.7 0.8
ー220ーM 75 220 145 4.0 1.0
ー250ーM 75 250 175 5.0
ー215ーM100 215 100 115 3.8 1.4
ー245ーM100 245 145 4.1 1.6
ー275ーM100 275 175 5.1
ー240ーM125 240 125 115 4.0 2.1
M/C Tool
ー270ーM125 270 145 4.3 2.4

ー300ーM125 300 175 5.3
ー265ーM150 265 150 115 4.1 3.0
for Turning Mill
ー295ーM150 295 145 4.4 3.4

ー325ーM150 325 175 5.4
ー290ーM175 290 175 115 4.3 4.3
ー320ーM175 320 145 4.6 4.6
ー350ーM175 350 175 5.6
A100ーRSG16ー140ーM 25 M16 17 25 6 29 140 25 115 52 54 4.0 0.2
General Purpose
ー170ーM 25 170 145 4.5

ー200ーM 25 200 175 5.7
Tool
ー165ーM 50 165 50 115 4.2 0.3

ー195ーM 50 195 145 4.7 0.4
ー225ーM 50 225 175 5.9
ー190ーM 75 190 75 115 4.5 0.5
ー220ーM 75 220 145 5.0 0.6
ー250ーM 75 250 175 6.1
JIG
ー215ーM100 215 100 115 4.7 0.8

ー245ーM100 245 145 5.2 0.9
ー275ーM100 275 175 6.3
ー240ーM125 240 125 115 4.9 1.1
Equipment
Measuring
ー270ーM125 270 145 5.4 1.3

ー300ーM125 300 175 6.5
ー265ーM150 265 150 115 5.1 1.6
ー295ーM150 295 145 5.6 1.8
ー325ーM150 325 175 6.7
Maintenance Tool
ー290ーM175 290 175 115 5.3 2.2

ー320ーM175 320 145 5.8 2.4
ー350ーM175 350 175 7.0 2.5
ー315ーM200 315 200 115 5.5 3.0
ー345ーM200 345 145 6.0 3.2
ー375ーM200 375 175 7.2 3.3
Wire EDM fixture
ー340ーM225 340 225 115 5.7 3.9

JIG Tool
ー370ーM225 370 145 6.3 4.2

ー400ーM225 400 175 7.4
Information
Technical
54
Cutter arbor with spindle-through coolant ( FMH )
ANGLE HEAD
Fig. 1 Dimensions for the
L cutter mounting
Comes Clamp bolt
in many D G
sizes d
Cutter arbor with spindle-through

coolant (FMH)
D C1 W
MAX. D1
300L K
H
BT50ーFMH31.75ー76ー300
Cutter
CODE φD L φC1 H W K φD1 φd G Clamp bolt
dia. kg
BT40ーFMH16 ー29ー 45 32 16 45 29 17 8 5 12 2 M 8 1.1 M 8※
M/C Tool
ー 90 90 1.4
ー 120 120 1.5
ー37ー 45 40 45 37 1.2
ー 90 90 1.6

for Turning Mill
ー 120 120 1.9
BT40ーFMH22 ー47ー 45 50 / 52 22 45 47 18 10 5 16 3 M10 1.3 M10※
ー 90 90 1.9
ー 150 150 2.7
ー 200 200 3.3
ー60ー 45 63 / 66 45 60 1.4
ー 90 90 2.2
General Purpose
ー 150 150 3.2
Tool
ー 200 200 4.1
BT40ーFMH22.225ー47ー 45 50 / 52 22.225 45 47 17 8 3.5 16 3 M10 1.3 M10※
ー 90 90 1.9
ー 150 150 2.7
ー 200 200 3.3
ー60ー 45 63 / 66 45 60 1.4
ー 90 90 2.2
JIG
ー 150 150 3.2
ー 200 200 4.1
BT40ーFMH25.4 ー70ー 60 80 25.4 60 70 22 9.5 5 18.5 3.5 M12 1.9 MBFーM12
ー 90 90 2.4
ー 150 150 3.4
Equipment
Measuring
BT40ーFMH31.75ー76ー 60 80 31.75 60 76 30 12.7 7 24 4 M16 2.1 MBFーM16
ー 90 90 2.6
ー 150 150 3.6
ー 200 200 4.4
ー96ー 60 100 60 96 2.4
ー 90 90 3.1
Maintenance Tool
ー 150 150 4.1

ー 200 200 4.9
BT50ーFMH16 ー29 ー 90 32 16 90 29 17 8 5 12 2 M 8 3.9 M 8※
ー 150 150 4.3
ー37 ー 90 40 90 37 4.1
ー 150 150 4.7
Wire EDM fixture
ー 200 200 5.3

BT50ーFMH22 ー47 ー 90
JIG Tool
50 / 52 22 90 47 18 10 5 16 3 M10 4.4 M10※

ー150 150 5.4
ー 200 200 6.2
ー 250 250 7.2
ー 300 300 8.3
ー60 ー 90 63 / 66 90 60 18 10 5 16 3 M10 4.8 M10※
Information
ー 150 150 6.4

Technical
ー 200 200 7.8

ー 250 250 9.2
ー 300 300 10.8
55
Cutter
CODE φD L φC1 H W K φD1 φd G Clamp bolt
ANGLE HEAD
dia. kg
BT50ーFMH22.225ー47 ー 90 50 / 52 22.225 90 47 17 8 3.5 16 3 M10 4.4 M10※

ー 150 150 5.4
ー 200 200 6.2
ー 250 250 7.2
ー 300 300 8.3
coolant (FMH)
ー60 ー 90 63 / 66 90 60 4.8
ー 150 150 6.4
ー 200 200 7.7
ー 250 250 9.2
ー 300 300 10.8
BT50ーFMH25.4 ー70 ー 60 80 25.4 60 70 22 9.5 5 18.5 3.5 M12 4.4 MBFーM12
ー 90 90 5.3
M/C Tool
ー 150 150 7.0

BT50ーFMH31.75 ー76 ー 60 80 31.75 60 76 30 12.7 7 24 4 M16 4.5 MBFーM16
ー 90 90 5.6
ー 150 150 7.6
ー 200 200 9.3
ー 250 250 11.0

for Turning Mill
ー 300 300 12.8

ー96 ー 60 100 60 96 5.0
ー 90 90 6.4
ー 150 150 9.2
ー 200 200 11.5
ー 250 250 13.8
General Purpose
ー 300 300 16.2

BT50ーFMH38.1 ー100ー 60 125 38.1 60 100 34 15.9 9 29 5 M20 5.2 MBFーM20
Tool
ー 90 90 6.6
ー 150 150 9.4
ー 200 200 11.7
ー 250 250 13.9
BT50ーFMH50.8 ー100ー 60 160 50.8 60 100 36 19.05 10 37.5 7 M24 5.4 MBFーM24
ー 90 90 6.9
JIG
ー 150 150 9.6

ー 200 200 11.8
ー 250 250 14.1
A63 ーFMH16 ー29ー 45 32 16 45 29 17 8 5 12 2 M 8 0.8 M 8※
ー 90 90 1.1
Equipment
ー 120
Measuring
120 1.3
ー37ー 45 40 45 37 0.9
ー 90 90 1.3
ー 120 120 1.6
A63 ーFMH22 ー47ー 45 50 / 52 22 45 47 18 10 5 16 3 M10 1.0 M10※
ー 90 90 1.6
Maintenance Tool
ー 150 150 2.6

ー 200 200 3.5
ー60ー 60 63 / 66 60 60 1.4
ー 90 90 1.9
ー 150 150 2.9
ー 200 200 3.8
Wire EDM fixture
A63 ーFMH22.225ー47ー 45 50 / 52 22.225 45 47 17 8 3.5 16 3 M10 1.0 M10※

ー 90
JIG Tool
90 1.6
ー 150 150 2.6
ー 200 200 3.4
ー60ー 60 63 / 66 60 60 1.4
ー 90 90 1.9
ー 150 150 2.9
Information
ー 200 200 3.8

Technical
A63 ーFMH25.4 ー70ー 60 80 25.4 60 70 22 9.5 5 18.5 3.5 M12 1.6 MBFーM12
ー 90 90 2.1
ー150 150 3.1
56
Cutter
CODE φD L φC1 H W K φD1 φd G kg Clamp bolt
dia.
ANGLE HEAD
A63 ーFMH31.75ー76ー 60 80 31.75 60 76 18 12.7 7 24 4 M16 1.7 MBFーM16
ー 90 90 2.3
ー150 150 3.3
ー200 200 4.1
ー96ー 60 100 60 96 2.1
ー 90 90 2.9

coolant (FMH)
ー150 150 3.8
ー200 200 4.6
A100ーFMH16 ー29ー 90 32 16 90 29 17 8 5 12 2 M 8 2.4 M 8※
ー150 150 2.8
ー37ー 90 40 90 37 2.6
ー150 150 3.3
ー200 200 3.9
A100ーFMH22 ー47ー 90 50 / 52 22 90 47 18 10 5 16 3 M10 2.9 M10※
ー150 150 3.9
M/C Tool
ー200 200 4.8
ー250 250 5.8
ー300 300 6.9
ー60ー 90 63 / 66 90 60 3.5

ー150 150 5.1
for Turning Mill

ー200 200 6.4
ー250 250 7.9
ー300 300 9.5
A100ーFMH22.225ー 47ー 90 50 / 52 22.225 90 47 17 8 3.5 16 3 M10 2.9 M10※
ー150 150 3.9
ー200 200 4.8
General Purpose
ー250 250 5.8
ー300 300 6.9
Tool
ー 60ー 90 63 / 66 90 60 3.4
ー150 150 5.0
ー200 200 6.4
ー250 250 7.9
ー300 300 9.5
A100ーFMH25.4 ー 70ー 60 80 25.4 60 70 22 9.5 5 18.5 3.5 M12 3.1 MBFーM12
ー 90 90 4.0
JIG
ー150 150 5.7
A100ーFMH31.75ー 76ー 60 80 31.75 60 76 30 12.7 7 24 4 M16 3.3 MBFーM16
ー 90 90 4.3
ー150 150 6.4
ー200 200 8.1
ー250 250 9.8
Equipment
Measuring
ー300 300 11.5
ー 96ー 90 100 90 96 5.3
ー150 150 8.1
ー200 200 10.4
ー250 250 12.7
ー300 300 15.1
Maintenance Tool
A100ーFMH38.1 ー100ー 90 125 38.1 90 100 34 15.9 9 29 5 M20 5.5 MBFーM20

ー150 150 8.2
ー200 200 10.5
ー250 250 12.8
A100ーFMH50.8 ー100ー 90 160 50.8 90 100 36 19.05 10 37.5 7 M24 5.7 MBFーM24
ー150 150 8.4
ー200 200 10.7
Wire EDM fixture
ー250 250 12.9

JIG Tool
■Option ■Note
●Retention knob→P.67 ●The clamp bolt marked with ※ in the list is a hexagonal socket bolt.
■Std. Access. Use a market standard bolt.
●Swing type coolant ducts are available upon request. For details, please contact us.
●Coolant duct(Fixed) ( HSK-A )→P.110
●Clamp bolt (unless marked with ※ in the list) ●Stopper key ■Caution
●The required clamp bolt design depends on the cutter manufacturer and the
type of cutter.
Clamp bolt W
Information
CODE L φC1 φC2 H1 H2 W G Shank type

Technical
MBF ー M12 30 33 23 10 11 10 M12 FMH25.4

C2 C1
ー M16 40 40 14 M16 FMH31.75
ー M20 50 50 27 14 16 17 M20 FMH38.1
G H1 ー M24 59 65 37 19 M24 FMH50.8
H2
L
57
MICRO HEAD
ANGLE HEAD
Fine adjustment boring holder
Applicable for all applications, from finishing to roughing.

MICRO HEAD
MFA coolant-
through
MBH coolant-
through
MBJ
Finishing Roughing Option Semi-finishing
Semi-finishing Finishing
M/C Tool
Finishing
for Turning Mill
φ20～102 φ50～380 φ5.5～205

General Purpose
Super precision Finishing and heavy duty Wide range and multi-
Tool
finishing boring holder boring holder purpose boring holder
Super precision finishing boring holder MFA P. 60

Rigid design thanks to the square sliding head
JIG
The square slide system can achieve greater rigidity against cutting force compared to
a round slide system since it has 2-face contact.
U n sta b l e
Insert area
Equipment
Measuring
MST square slide Competitors'

round slide
Available for spindle-through
Guaranteed fine adjustment coolant as standard.
Maintenance Tool
It allows 0.01mm
dia. fine adjustment
easily and precisely.
φ0.01
The setting diameter
doesn't change when
you clamp the head.
Wire EDM fixture
JIG Tool
system Adjustable effective length

Using the extension allows for
CODE Boring dia.
increased effective length
MFA20 φ20 ~ 24.5 extension
CODE Length（mm）
MFA24 φ24 ~ 30
MFA20 30 ・ 35 ・ 40 ・ 45
Information
MFA29 φ29 ~ 38
Technical
MFA24
MFA36 φ36 ~ 52 MFA29 30 ・ 40 ・ 50 ・ 60
MFA36 40 ・ 50 ・ 60 ・ 70 Length
MFA50 φ50 ~ 77
MFA50 45 ・ 60 ・ 75 ・ 90
MFA75 φ75 ~ 102 MFA75 45 ・ 60 ・ 75 ・ 90
58
Applicable for all applications, from finishing to roughing.
ANGLE HEAD
MBH P. 62
Sliding rack design … Dovetail clamping …
Wide adjusting range High rigidity and accuracy
MICRO HEAD
The micro head, Holder The dovetail clamping capability holds the slide
MBH provides Dovetail portion firmly without needing to change the set-
a wide adjusting design ting diameter when clamping the slide. It is ideal
range and secure for high-rigidity, high-accuracy boring applications.
clamping by mak-
Worm
ing use of the slid-
ing rack design for
fine adjustment in
Rack
combination with
dovetail clamping
capability. Dovetail design
M/C Tool
Slide φ0.01

for Turning Mill
φ0.002
(Vernier scale)
MBH50 MBH75 MBH115 MBH180 MBH245 MBH310
General Purpose
φ50～80 φ75～120 φ115～185 φ180～250 φ245～315 φ310～380
Tool
Wide range and multi-purpose boring holder MBJ P. 64
The combination of two kinds of boring bars allows for a wide range of boring applications from
5.5mm to 205mm dia.
JIG
MBJ45 MBJ70
Equipment
Measuring
φ0.01
φ70
Maintenance Tool
φ45
45 φ0.002
(Vernier scale)
φ18
φ12
Wire EDM fixture
JIG Tool
φ100~205
φ12
φ48~80 Side hole
Inclined hole
φ18 φ18
Information
Technical
Center hole Off-set hole

Center hole
φ22~67 φ67~107
φ5.5~48
59
MICRO HEAD MFA type ( MFA )
ANGLE HEAD
L L
Fig. 1 Fig. 2
M M
Extension Extension
D D
MICRO HEAD
C1 C1
BT50ーMFA36ー165 C2
L L
Fig. 3 M Fig. 4 M
D D
C1 C1
C2
A100ーMFA29ー165
M/C Tool
L1 L
Fig. 5
M
D1 D
for Turning Mill
C1
S32ーMFA24ー90
CODE Fig.
Boring dia.
L M φC1 φ C2 Extension
Extension
(φD)
D
BT30ーMFA20ー 90 1 20～ 24.5 90 63 19 ーー 0.6
ーMFA24ー 90 24～ 30 22 L
ーMFA29ー105 29～ 38 105 78 27.6 0.7
General Purpose
ーMFA36ー105 36～ 52 34.4 0.9 CODE Applicable head φD L

Tool
BT40ーMFA20ー120 2 20～ 24.5 120 65 19 46 ー 1.4 MS0ー30 MFA20 19 30 0.1

ー150 150 81 1.5 MS0ー35 35 0.1
MS0ー40 40 0.1
ーMFA24ー150 24～ 30 62 22 1.7
MS0ー45 45 0.1
ー180 180 92 30 1.8 MS1ー30 MFA24 22 30 0.1
ーMFA29ー150 29～ 38 150 82 27.6 ー 1.7 MS1ー35 35 0.1
ー180 180 112 30 1.8 MS1ー40 40 0.1
ーMFA36ー150 36～ 52 150 97 34.4 62 ー 1.9 MS1ー45 45 0.1
JIG
ー195 195 142 45 2.2 MS2ー30 MFA29 27.6 30 0.1

MS2ー40 40 0.2
ーMFA50ー150 50～ 77 150 102 46 ー 2.4
MS2ー50 50 0.2
ー195 195 147 45 3.0 MS2ー60 60 0.3
ーMFA75ー150 75～102 150 102 51 ー 2.5 MS3ー40 MFA36 34.4 40 0.3
ー195 195 147 45 3.1 MS3ー45 45 0.3
Equipment
Measuring
BT50ーMFA20ー165 2 20～ 24.5 165 54 19 62 ー 4.9 MS3ー50 50 0.3

MS3ー60 60 0.4
ー195 195 84 30 5.0
MS3ー70 70 0.5
ー240 240 64 ー 6.3
MS4ー45 MFA50 46 45 0.6
ーMFA24ー165 24～ 30 165 52 22 4.9 MS4ー60 MFA75 60 0.7
ー195 195 82 30 5.0 MS4ー75 75 0.9
ー240 240 62 ー 6.3 MS4ー90 90 1.1
Maintenance Tool
ー270 270 92 30 6.4 ■Caution

●Longer projection length causes chattering and
ーMFA29ー165 29～ 38 165 82 27.6 70 ー 4.7 reduced rigidity
ー195 195 112 30 4.8
ー240 240 82 ー 6.7 Insert
ー270 270 112 30 6.9 2.5 4.76
ーMFA36ー165 36～ 52 165 97 34.4 ー 4.6
R t = 2.38
Wire EDM fixture
ー210 210 142 45 4.9

CODE R Insert material Qʼty Work material
JIG Tool
ー255 255 97 80 ー 7.9

TPA082ーPA 0.2 Cermet 10pcs. Steel
ー300 300 142 45 8.2
TPA084ーPA 0.4
ーMFA50ー165 1 50～ 77 165 122 46 ーー 4.9 TPA082ーMA 0.2 Carbide Stainless
ー210 210 167 45 5.5 TPA084ーMA 0.4
ー255 2 255 147 86 ー 7.6 TPA082ーKA 0.2 Cast iron
ー300 300 192 45 8.2 TPA084ーKA 0.4
Information
ーMFA75ー165 1 75～102 165 122 51 ーー 5.0

Technical
TPA082ーNA 0.2 Aluminum

ー210 210 167 45 5.6 TPA084ーNA 0.4
ー255 2 255 147 86 ー 7.7 TPA082ーND 0.2 Polycrystalline 1pc.
ー300 300 192 45 8.3 TPA084ーND 0.4 diamond
60
Boring dia.
CODE Fig. L M φC1 φC2 Extension D1 L1
ANGLE HEAD
(φD) Kg
A40 ーMFA20ー 90 3 20～ 24.5 90 65 19 ーーーー 0.4

ーMFA24ー 90 24～ 30 22
ーMFA29ー105 29～ 38 105 82 27.6 0.6
ーMFA36ー105 36～ 52 34.4 0.8
ーMFA50ー105 50～ 77 46 1.2
MICRO HEAD
A50 ーMFA20ー120 4 20～ 24.5 120 69 19 41 ーーー 0.8
ーMFA24ー120 24～ 30 22 0.9
ーMFA29ー120 29～ 38 82 27.6
ーMFA36ー120 3 36～ 52 91 34.4 ー 1.1
ーMFA50ー120 50～ 77 46 1.6
ーMFA75ー120 75～102 51 1.7
A63 ーMFA20ー150 4 20～ 24.5 150 81 19 46 ーーー 1.3
ーMFA24ー150 24～ 30 62 22 1.5
ー180 180 92 30 1.6
ーMFA29ー150 29～ 38 150 82 27.6 ー 1.5
M/C Tool
ー180 180 112 30 1.6
ーMFA36ー150 36～ 52 150 97 34.4 52 ー 1.7
ー195 195 142 45 2.0

ーMFA50ー150 50～ 77 150 102 46 ー 2.2
for Turning Mill

ー195 195 147 45 2.7
ーMFA75ー150 75～102 150 102 51 ー 2.3
ー195 195 147 45 2.8
A100 ーMFA20ー165 4 20～ 24.5 165 54 19 62 ーーー 3.8
ー195 195 84 30 3.9
ー240 240 64 ー 5.3
ーMFA24ー165 24～ 30 165 52 22 3.8
General Purpose
ー195 195 82 30 3.9
ー240 240 62 ー 5.4
Tool
ー270 270 92 30 5.5
ーMFA29ー165 29～ 38 165 82 27.6 70 ー 3.7
ー195 195 112 30 3.8
ー240 240 82 ー 5.8
ー270 270 112 30 6.0
ーMFA36ー165 36～ 52 165 97 34.4 80 ー 3.7
ー210 210 142 45 4.0
JIG
ー255 255 97 ー 7.2
ー300 300 142 45 7.5
ーMFA50ー165 3 50～ 77 165 131 46 ーー 3.6
ー210 210 176 45 4.2
ー255 4 255 147 85 ー 6.7
Equipment
ー300 300 192 45 7.3
Measuring
ーMFA75ー165 3 75～102 165 131 51 ーー 3.7
ー210 210 176 45 4.3
ー255 4 255 147 85 ー 6.8
ー300 300 192 45 7.4
F63 ーMFA20ー150 4 20～ 24.5 150 81 19 46 ーーー 1.3 Maintenance Tool
ーMFA24ー150 24～ 30 62 22 1.5
ー180 180 92 30 1.6
ーMFA29ー150 29～ 38 150 82 27.6 ー 1.5
ー180 180 112 30 1.6
ーMFA36ー150 36～ 52 150 97 34.4 52 ー 1.7
ー195 195 142 45 2.0
ーMFA50ー150 50～ 77 150 102 46 ー 2.2
Wire EDM fixture
ー195 195 147 45 2.7

ST25TーMFA20ー 75 5 20～ 24.5 75 75 19 ーー 25 70 ー
JIG Tool
ーMFA24ー 90 24～ 30 90 85 22
ーMFA29ー105 29～ 38 105 105 27.6
S 32 ーMFA20ー 90 5 20～ 24.5 90 75 19 ーー 32 70 ー
ーMFA24ー 90 24～ 30 80 22
ーMFA29ー105 29～ 38 105 95 27.6
ーMFA36ー105 36～ 52 34.4
Information
Technical
ーMFA50ー105 50～ 77 46
■Option ■Note
●Insert ●Retention knob ( BT ) →P.67 ●Swing type coolant ducts are available upon request. For details, please contact us.
■Std. Access. ●Drive key slot and cutting direction are in alignment.
●The extension mentioned in the list is set between shank and head. The number
●T wrench ●Insert clamping screw ●Coolant duct(Fixed) ( HSK-A )→P.110
refers to the extension length.
●Torx wrench
61
MICRO HEAD MBH type (MBH)
ANGLE HEAD
Fig. 1 L Fig. 2 L Fig. 3 L (M)

L1 M M
D D
D
MICRO HEAD
φ70 C C
C
BT50ーMBH180ー225
Fig. 4 L Fig. 5 L Fig. 6 L (M)

M M
φ70 C
D D
M/C Tool
A100ーMBH75ー165 C
C
for Turning Mill
Boring dia.
CODE Fig. L M φC L1 Cartridge
(φD) Kg
BT40ーMBH 50ー150 2 50～ 80 150 118 45 ー PTC10 2.1

ー210 1 210 155 28 STGP10 3.0
ーMBH 75ー165 3 75～120 165 165 70 ー 4.0
PTC12
ーMBH115ー165 115～185 110
STGP12
5.9
General Purpose
ーMBH180ー165 180～250 153 6.6

BT50ーMBH 50ー150 2 50～ 80 150 107 45 ー 4.5
Tool
PTC10
ー180 180 137 STGP10 5.6
ー240 1 240 155 47 6.3
ー300 300 107 7.0
ーMBH 75ー165 3 75～120 165 127 70 ー PTC12 6.7
ー225 225 187 STGP12 8.5
ー285 285 247 10.3
JIG
ー315 315 277 11.2

ーMBH115ー165 115～185 165 165 110 8.6
ー225 225 225 10.4
ー285 285 285 12.2
ー315 315 315 13.1
Equipment
ーMBH180ー165 180～250 165 165 153 9.3

Measuring
ー225 225 225 11.1

ー285 285 285 12.9
ーMBH245ー165 245～315 165 165 200 10.0
ー225 225 225 11.8
ー285 285 285 13.6
Maintenance Tool
ーMBH310ー165 310～380 165 165 255 11.0

ー225 225 225 12.8
A50MーMBH 50ー135 5 50～ 80 135 109 45 ー PTC10/STGP10 1.6
ーMBH 75ー175 75～120 175 149 70 PTC12/STGP12 3.4
A63 ーMBH 50ー150 5 50～ 80 150 119 45 ー PTC10 1.9
ー210 210 179 STGP10 2.6
Wire EDM fixture
ーMBH 75ー195 6 75～120 195 195 70 4.5

PTC12
ーMBH115ー195 115～185 110 6.5
JIG Tool
STGP12
ーMBH180ー195 180～250 153 7.2
A100ーMBH 50ー150 5 50～ 80 150 116 45 ー 3.3
ー180 180 146 PTC10 3.6
ー240 4 240 155 56 STGP10 5.2
ー300 300 116 6.8
Information
ーMBH 75ー165 6 75～120 165 131 70 ー PTC12 5.3

Technical
ー225 225 191 STGP12 6.9

ー285 285 251 8.6
ー315 315 281 9.4
62
Boring dia.
CODE Fig. L M φC L1 Cartridge
ANGLE HEAD
(φD) Kg
A100ーMBH115ー165 4 115～185 165 165 110 ー PTC12 7.2

ー225 225 225 STGP12 8.9
ー285 285 285 10.5
ー315 315 315 11.4
ーMBH180ー165 180～250 165 165 153 7.9
MICRO HEAD
ー225 225 225 9.6
ー285 285 285 11.2
ーMBH245ー165 245～315 165 165 200 8.7
ー225 225 225 10.3
ー285 285 285 12.0
ーMBH310ー165 310～380 165 165 255 9.6
ー225 225 225 11.2
■Option ■Note
● Insert Cartridge
● Coolant-through
● Retention knob( BT ) →P.67
● ● Swing type coolant ducts are available upon request. For details, please contact us.
M/C Tool
● Drive key slot and cutting direction are in alignment.
■Std. Access. ● Add "C" after the MBH model no. for through-spindle coolant when you order.
● T wrench ● Coolant duct(Fixed) ( HSK-A )→P.110
(Example: BT50-MBH75C-165)
■Caution
● Each slide part is produced to match precisely with its corresponding slide, so

such parts are not interchangeable with each other.
for Turning Mill

● The undercut area of the A50M is different from the standards. Please be careful
to check for interference with the ATC arm.
General Purpose
Tool
Cartridge Insert
JIG
PTC10 STGP10 PTC12 STGP12
MBH50 2.26 6.35 3.5 6.35 3.81 9.525 4.4 9.525
PTC10 STGP10
R R R R
3.18 3.18 11° 4.76 3.18 11°
Equipment
Measuring
Negative Positive
CODE R Insert material Work-piece material Application Q'ty Cartridge
TNB114ーPB 0.4 Carbide coating Steel Semi-finishing 10pcs. PTC10
ーMB Carbide stainless
ーKB Cast iron
ーPMA Cermet Steel･stainless Finishing
MBH75～310
Maintenance Tool
ーKA Carbide Cast iron
PTC12 STGP12 TPC112ーPA 0.2 Cermet Steel Finishing 10pcs. STGP10
TPC114ーPA 0.4
TPC112ーMA 0.2 Carbide stainless
Negative Positive TPC114ーMA 0.4
TPC112ーKA 0.2 Cast iron
TPC114ーKA 0.4
TPC112ーNA 0.2 Aluminum
Wire EDM fixture
TPC114ーNA 0.4
TPC112ーND 0.2 Polycrystalline 1pcs.
JIG Tool
CODE Work-piece material Holder type TPC114ーND 0.4 diamond

PTC10 Steel・Cast Iron・Stainless TNB168ーPB 0.8 Carbide coating Steel Semi-finishing 10pcs. PTC12
MBH50 ーMB stainless
Steel・Cast Iron
STGP10 ーKB Carbide Cast iron
Stainless・Aluminum
TNB164ーPMA 0.4 Cermet Steel･stainless Finishing
PTC12 Steel・Cast Iron
MBH75 ーKA Carbide Cast iron
Steel・Cast Iron TPC164ーPA 0.4 Cermet
STGP12 ～310 Steel Finishing 10pcs. STGP12
Information
Stainless・Aluminum
Technical
ーMA Carbide coating stainless

■Note ーKA Carbide Cast iron
● PTC : Pin lock type ーNA Aluminum
● STGP : Clamp-on type
ーND Polycrystalline diamond 1pcs.
63
MICRO HEAD MBJ type (MBJ45)
ANGLE HEAD
Fig. 1 L Fig. 2 L
M M
60° 60°
D D
MICRO HEAD
Inclined Center Inclined Center

A100ーMBJ45ー150 φ45 hole(φ12) hole(φ12) φ45 hole(φ12) hole(φ12)
Fig. 3 Inclined hole(φ12)

70 105
φ32 D
5 φ45 Center hole(φ12)
S32ーMBJ45ー105
■Option
Boring dia.
CODE Fig. L M ●Insert ●Insert holder
(φD) Kg
●Insert and insert holder set ●Retention knob ( BT ) →P.67
M/C Tool
BT30ーMBJ45ー120 1 5.5～80 120 98 1.3 ■Std. Access.

●Wrench set
BT40ーMBJ45ー150 1 5.5～80 150 123 2.2 ●Coolant duct(Fixed) (HSK-A) →P.110
BT50ーMBJ45ー150 1 5.5～80 150 112 4.6 ■Note
● Swing type coolant ducts are available upon request.

ー180 180 142 5.6
for Turning Mill

A63 ーMBJ45ー150 2 5.5～80 150 124 2.0 ●Drive key slot and cutting direction are in alignment.
A100ーMBJ45ー150 2 5.5～80 150 121 3.3

ー180 180 151 3.7
S32 ーMBJ45ー105 3 5.5～80 ーーー
General Purpose
Insert holder, Insert

Tool
For center hole STV-C1208 STV-C1216
Boring diameter φ5.5～8 Boring diameter φ8～10

Insert holder Insert Insert holder Insert
CODE CODE R Insert material Q'ty Work material CODE CODE R Insert material Q'ty Work material
STVーC12055 TPE042ーPA 0.2 Cermet 10pcs. Steel STVーC1208 TPE032ーPA 0.2 Cermet 10pcs. Steel
TPE034ーPA 0.4
JIG
ーMKA Carbide coating Stainless

Carbide shank Cast iron
Carbide shank TPE032ーMKA 0.2 Carbide coating Stainless
ーNA Carbide Aluminum 48 TPE034ーMKA 0.4 Cast iron
34
TPE032ーNA 0.2 Carbide Aluminum
30 2.3 44
3.97 TPE034ーNA 0.4
2.3 3.97
R
t = 1.59 R
Equipment
Measuring
t = 1.59
Boring diameter φ10～12 Boring diameter φ12～14

STVーC1210 TPE082ーPA 0.2 Cermet 10pcs. Steel STVーC1212 TPE112ーPA 0.2 Cermet 10pcs. Steel
TPE114ーPA 0.4
Maintenance Tool
TPE084ーPA 0.4 Carbide shank

Carbide shank TPE082ーMA 0.2 Carbide Stainless TPE112ーMA 0.2 Carbide coating Stainless
TPE084ーMA 0.4 70 TPE114ーMA 0.4
59 TPE082ーKNA 0.2 Cast iron 66 TPE112ーKNA 0.2 Carbide Cast iron
TPE084ーKNA 0.4 Aluminum TPE114ーKNA 0.4 Aluminum
55
2.3 4.76 2.8 6.35
R R
t = 2.38 t = 2.38
Wire EDM fixture

JIG Tool

STVーC1214 TPE112ーPA 0.2 Cermet 10pcs. Steel STV1216 TPC092ーPA 0.2 Cermet 10pcs. Steel
TPE114ーPA 0.4 TPC094ーPA 0.4
Carbide shank TPE112ーMA 0.2 Carbide coating Stainless Steel shank TPC092ーMA 0.2 Carbide Stainless
81 TPE114ーMA 0.4 52 TPC094ーMA 0.4
TPC092ーKNA 0.2 Cast iron
TPE112ーKNA 0.2 Carbide Cast iron
TPC094ーKNA 0.4 Aluminum
Information
TPE114ーKNA 0.4 Aluminum

Technical
TPC092ーND 0.2 Polycrystalline 1pcs. Aluminum

2.8 6.35 TPC094ーND 0.4 diamond
3.0 5.56
R
t = 2.38 R t = 2.38
64
For inclined hole S-STA12
ANGLE HEAD
Insert and insert holder set
Boring diameter φ48～80
Insert Work
CODE Q'ty Insert Q'ty
Insert holder Insert holder material
CODE CODE R Insert material Q'ty Work material STV1216 1pcs. TPC094ーPA 1pcs. Steel
PJー45
SーSTA12 TPC112ーPA 0.2 Cermet 10pcs. Steel SーSTA12 1pcs. TPC114ーPA 1pcs.
TPC114ーPA 0.4 STV1216 1pcs. TPC094ーKNA 1pcs. Cast iron
MICRO HEAD
Steel shank KJー45
SーSTA12 1pcs. TPC114ーKA 1pcs. Aluminum
TPC112ーMA 0.2 Carbide Stainless
TPC114ーMA 0.4
TPC112ーKA 0.2 Cast iron
TPC114ーKA 0.4
TPC112ーNA 0.2 Aluminum TPC094
TPC114ーNA 0.4
TPC112ーND 0.2 Polycrystalline 1pcs.
3.5 6.35 TPC114ーND 0.4 diamond
R TPC114
M/C Tool
t = 3.18
STV1216 S-STA12
MICRO HEAD MBJ type ( MBJ70 )

for Turning Mill
Fig. 1 Fig. 2
L Offset hole(φ18) L Offset hole(φ18)
22.5 Center hole(φ18) 22.5 Center hole(φ18)
D 20 20
D
φ70 φ70
General Purpose
BT50ーMBJ70ー165
Side hole(φ18) Side hole(φ18)
Tool
■Option
Chucking
CODE Fig. L ●Insert ●Insert holder ●Insert and insert holder set
range(φD) Kg ●Clamping sleeve ●Retention knob ( BT ) →P.67
■Std. Access.
BT40 ーMBJ70ー165 1 22～205 165 4.2 ●Wrench set ●Coolant duct (Fixed) ( HSK-A ) →P.110
BT50 ーMBJ70ー165 1 22～205 165 6.5 ■Note
● Swing type coolant ducts are available upon request. For details,
A63 ーMBJ70ー195 2 22～205 195 4.6 please contact us.

●Drive key slot and insertion direction are in alignment.
A100ーMBJ70ー165 2 22～205 165 5.4
JIG
●The throw-away insert for aluminum is a diamond insert.
Sales unit is per 1 piece
Insert holder, Insert

S-STV1822
For center hole・inclined hole For side hole
Equipment
Measuring
STH18
SーSTV1822 TPC112ーPA 0.2 Cermet 10pcs. Steel STH18 CCD094ーPA 0.4 Carbide coating 10pcs. Steel Maintenance Tool
TPC114ーPA 0.4 CCD094ーMA Stainless
Steel shank Steel shank
TPC112ーMA 0.2 Carbide Stainless CCD094ーKA Carbide Cast iron
Center hole 4
TPC114ーMA 0.4 CCD094ーNA Aluminum
70
TPC112ーKA 0.2 Cast iron CCD094ーND Polycrystalline
A 1pcs.
TPC114ーKA 0.4 diamond
TPC112ーNA 0.2 D
Aluminum
Boring diameter TPC114ーNA 0.4 9.525 4.4
φ22〜67 TPC112ーND 0.2 Polycrystalline 1pcs.
Offset hole TPC114ーND 0.4 diamond
70 R
Wire EDM fixture
A φD t = 3.97
3.5 6.35 15 100～145
JIG Tool
35 140～185
Boring diameter R 45 160～205
φ67〜107 t = 3.18
Insert and insert holder set

CODE Insert holder Q'ty Insert Q'ty
Work
material
Information
Technical
SーSTV1822 1pcs. TPC114ーPA 10pcs. Steel TPC114

PJー70
STH18 1pcs. CCD094ーPA 10pcs.
SーSTV1822 1pcs. TPC114ーKA 10pcs. Cast iron
KJー70
STH18 1pcs. CCD094ーKA 10pcs.
S-STV1822 STH18 CCD094
65
Cutting data
ANGLE HEAD
MFA type
S45C ー Finishingー SUS304 ー Finishingー FC250 ー Finishingー A5056 ー Finishingー
Insert：TPA084-PA Insert：TPA084-MA Insert：TPA084-KA Insert：TPA084-NA
(Nose R0.4) (Nose R0.4) (Nose R0.4) (Nose R0.4)
MICRO HEAD
N 3317 min-1 N 1326 min-1 N 636 min -1 N 3538 min -1

f 0.1 mm/rev f 0.1 mm/rev f 0.1 mm/rev f 0.1 mm/rev
0.1 0.1 0.1 0.1

φ24 φ24 φ50 φ36
BT50-MFA24-270 BT50-MFA24-240 BT50-MFA50-300 BT50-MFA36-300
MBH type
M/C Tool
S45C ー Semi-finishingー SUS304 ー Semi-finishingー FC250 ー Semi-finishingー A5056 ー Semi-finishingー

Insert ：TNB168-PB (Nose R0.8) Insert ：TNB168-MB (Nose R0.8) Insert ：TNB168-KB (Nose R0.8) Insert ： TPC164-NA (Nose R0.4)
Cartridge：PTC12 Cartridge：PTC12 Cartridge： PTC12 Cartridge： STGP12

for Turning Mill
N 575 min -1 N 383 min-1 N 383 min-1 N 806 min-1

4 4 4 2
φ75 φ75 φ75 φ75
General Purpose
BT50-MBH75-315 BT50-MBH75-315 BT50-MBH75-315 BT50-MBH75-315

Tool
S45C ー Finishingー SUS304 ー Finishingー

Insert ：TPC164-PA (Nose R0.4) Insert ： TPC164-MA (Nose R0.4)
Cartridge： STGP12 Cartridge： STGP12
N 1057 min-1 N 507 min-1
f 0.1 mm/rev f 0.1 mm/rev Micro Head for
JIG
engraving
0.15 0.15
φ75 φ75
BT50-MBH75-315 BT50-MBH75-315
FC250 ー Finishingー A5056 ー Finishingー

Equipment
Measuring
Insert ： TPC164-KA (Nose R0.4) Insert ：TPC164-NA (Nose R0.4)

Cartridge： STGP12 Cartridge：STGP12
N 507 min-1 N 1693 min-1
f 0.1 mm/rev f 0.1 mm/rev
Maintenance Tool

0.15 0.1 MST and ask for a catalog.
φ75 φ75
BT50-MBH75-315 BT50-MBH75-315
MBJ type
Wire EDM fixture
JIG Tool
S45C ー Finishingー SUS304 ー Finishingー FC250 ー Finishingー A5056 ー Finishingー

Insert ：TPE032-PA（Nose R0.2） Insert ：TPE032-MKA（Nose R0.2） Insert ：TPE032-MKA（Nose R0.2） Insert ：TPE032-NA（Nose R0.2）
Cartridge：STV-C1208 Cartridge： STV-C1208 Cartridge：STV-C1208 Cartridge：STV-C1208
N 3107 min-1 N 1165 min -1 N 3107 min -1 N 6602 min-1
Information
Technical
φ8 0.1 φ8 0.1 φ8 0.1 φ8 0.1

0.1
BT40-MBJ45-150 BT40-MBJ45-150 BT40-MBJ45-150 BT40-MBJ45-150
66
Retention knob
ANGLE HEAD
Caution
■ Retention knobs in this catalog are typical models for various machine tool
companies. Confirm the correct retention knob design refer to the machine
specification sheet.
Retention knob
■ We manufacture other kinds of retention knobs. Please contact us for the
details.
Standard type For through spindle coolant type

BT30 BT40 BT50
Compatible
BT30 BT40 BT50
manufacturers Standard Standard type with
a through hole Standard Standard type with
a through hole standard Standard type with
a through hole
P40Tー2 Pー339 Pー499

OKUMA ー（MB series） P50Tー2 Pー419 ー Pー419
M/C Tool
P40Tー1 Pー297
(MILLAC series)
OKK ー P40Tー1 ー Pー143 ーーーー

OHTORI ー P40Tー1 Pー297 P50Tー1 Pー299 ーーー
for Turning Mill

KITAMURA P30Tー1 Pー445 Pー348 Pー323ー1 Pー400 ー Pー323ー1 Pー400
Pー399(Mycenter-1Xi)
KIRA P30Tー1 Pー445 P40Tー1 Pー297 ーー Pー323ー1 ー
KIWA P30Tー1 Pー445 Pー348 Pー323ー1 Pー400 ー Pー323ー1 Pー400
KURASHIKI ー P40Tー1 Pー297 P50Tー1 Pー299 ーーー
KOMATSU NTC P30Tー1 Pー445 P40Tー1 Pー297 P50Tー1 Pー299 Pー522 Pー505 Pー384
General Purpose
JTEKT ー P40Tー1 Pー297 P50Tー1 Pー299 ー Pー297 Pー299
SHIZUOKA P30Tー1 Pー445 Pー141 Pー498 Pー143 Pー402 ーーー
Tool
SNK ー P40Tー2 Pー339 P50Tー2 Pー419 ーーー
SUGINO P30Tー2 Pー497 ーーーーー
DMG MORI P30Tー1 Pー445 Pー141 ー Pー143 ーー Pー435 Pー513
TOSHIBA MACHINE ーー P50Tー1 Pー299 ーーー
NIIGATA MACHINE TECHNO ーー P50Tー2 Pー419 ーーー
FANUC P30Tー1 Pー522 ーー Pー522 ーー
JIG
BROTHER P30Tー2 Pー511 ーー Pー511 ーー
HOWA P30Tー1 Pー445 P40Tー1 Pー297 P50Tー1 Pー299 ーーー
MAKINO ー P40Tー1 Pー297 P50Tー1 Pー299 ー Pー323ー1 Pー299
(V series) (A, MCC, V series)
Pー348 Pー323ー1 Pー400

(a series, D series) (A series, a series)
Equipment
Measuring
MATSUURA P30Tー2 Pー511 Pー348 Pー323ー1 P50Tー2 Pー419 ー Pー323ー1 ー
Pー399 Pー400
MITSUI SEIKI ー Pー007 ー Pー008 Pー250 ーーー
MITSUBISHI ー P40Tー1 ー P50Tー2 ーーーー
YASDA ー Pー348 Pー438 P50Tー1 Pー299 ー Pー509 Pー459 Maintenance Tool
P-400 ー
Pー288ー1
(YBM1218V) (YBM1218V)
YAMAZAKI GIKEN ー P40Tー1 Pー297 P50Tー2 Pー419 ーーー
MAZAK ー Pー227 Pー514 ー Pー227 Pー514
■BT30 13
43
13.4
43
5 5 5 5
Wire EDM fixture
JIG Tool
11 d 12 4
θ D M12 8 M12
75°
CODE φD φd θ Note CODE Note

P30Tー1 7 ー 45 MASー1 Pー399 JIS30P
Pー445 3 P30Tー1 through hole
Information
P30Tー2 ー
Technical
60 MASー2
Pー497 2 P30Tー2 through hole
ー522 8 4 45 FANUC center-through
ー511 7.5 2.5 60 BROTHER center-through
67
■BT40
ANGLE HEAD
60 54 50
7 22 6 6 16 7 7 13 5
15 d 19 d 15
Retention knob
θ 10 M16 M16 10 M16

14 90°
75°
CODE φd θ Note CODE φd Note CODE Note
P40Tー1 ー 45 MAS ー 1 Pー348 ー JIS40P Pー007 MITSUI SEIKI

Pー297 4 P40Tー 1 through hole ー323ー1 7 P ー 348 through hole
P40Tー2 ー 60 MAS ー 2 ー499 4 OKUMA center-through
Pー339 4 P40Tー 2 through hole ー438 7 YASDA through hole
ー141 ー 90 ーー509 YASDA center-through
M/C Tool
ー498 4 P ー 141 through hole

ー505 3 45 KOMATSU NTCcenter-through
44.106 54
for Turning Mill
5.08 11.026 3 6 14.5 4

4.5
18.796 19 7
7
45° M16 14 M16

12.446 75°
General Purpose
CODE Note CODE Note

Tool
Pー227 MAZAK Pー435 DMG MORI center-through
■BT50
JIG
85 74 71
10 25 10 9 18 7 8 18 5
85
23 d 28 d 24 d
Equipment
Measuring
17 M24 M24
θ 21 90° 18 M24
75°
CODE φd θ Note CODE φd Note CODE φd Note
P50Tー1 ー 45 MAS ー 1 Pー400 10 JIS50P Pー008 ー MITSUI SEIKI

Maintenance Tool
Pー299 6 P50Tー 1 through hole ー288ー1 6 P ー 400 through hole ー250 8 P ー 008 through hole
P50Tー2 ー 60 MAS ー 2
Pー419 6 P50Tー 2 through hole
ー143 ー 90 ー 65.2
ー402 7 P ー 143 through hole 7.62 12.58 5
ー459 45 YASDA center-through
Wire EDM fixture
ー513 8 90 DMG MORI center-through

JIG Tool
ー384 5.5 45 KOMATSU NTC center-through

28.956 10
M24
20.828
45°
CODE Note
Information
Technical
Pー514 MAZAK
68
HSK-T TOOLING SYSTEMS
for TURNING MILL
World
standard
SET SCREW HOLDERS FOR ROUND SHANK P. 71
For through-spindle coolant For nozzle-coolant

CC type CN type
ISO
for Turning Mill
INSERT HOLDERS FOR SQUARE-SHANK P. 72
For external turning and cutting off For external / face turning For external / face turning
SV type SA type SB type
For external/ face turning For external/ face turning For face turning
SC type SN type SH type
BLANK TOOL CHECKING ARBOR
P. 73 P. 73
69
HSK-T TOOLING SYSTEMS for TURNING MILL
ANGLE HEAD
The obvious choice for ISO standard,

HSK-T specs turning mill spindles!
A full range of milling tool holders, covering 70% of
multi-tasking machine applications!
Compatible with machining center holders!
Supplied by tool holder manufacturer world wide!
M/C Tool
Extensive line-up and reasonable price!
Standardized by many machine tool manufacturers!

OKUMA DMG MORI NAKAMURA-TOME YAMAZAKI MAZAK
・MULTUS SERIES ・NT (NTX) Series Precision Industry ・INTEGREX
・MACTURN SERIES ・FD Series ・Super N TJ X Series 　 i Series
・MU SERIES etc ・CTX Series ・Super NTMX Series etc J Series
e Series etc
for Turning Mill
MATSUURA MACHINERY HERMLE HORKOS

CORPORATION ・MT Series ・NS70 Version
・CUBLEX Series
Turning tools ( HSKーT standard )

General Purpose
Maintains high precision during turning operation High bending rigidity

By using an ICTM tool holder, which minimizes the gap between During turning, the cutting force of
Tool
ort
the machine spindle drive key and tool holder drive key way, a spindle axis becomes very large. Sh
the height of the cutting edge is maintained precisely and Therefore, a rigid, two-face-contact
variation in workpiece diameter is minimized. clamping system performs very well.
Light-weight
Drive key way (Holder) Drive key of (hollow)
machine spindle
e
ac c t
2- f n t a
JIG
The gap of the height co

of cutting edge
Variation in
workpiece diameter Minimizing the gap
as small as possible. Designed to shorten undercut area
Tolerance of drive key We made an undercut area thicker and as short as possible in
Equipment
Measuring
Tolerance 12.25 12.35 order to increase the holder rigidity.

Min. gap 0.15 Tolerance of
of drive key way
HSK-A63 Max. gap 0.33 12.5 12.58
Improved Undercut area
rigidity Width 4.0 mm
12.2 12.3 12.4 12.5 12.6
12.385 12.41
Depth 0.5 mm
Tolerance Min. gap 0.015
of
Maintenance Tool
HSK-T63 12.425 12.46 Short

Max. gap 0.075
Rotating tools ( HSKーA standard )　　

Compatible with machining center Pre-balanced design
Needless to say, the holder of a machining center and a The HSK-A-type shank is unbalanced in its standard form, but
turning mill machine can be shared. at MST we have applied our original pre-balancing to make the
Wire EDM fixture
tool holders applicable for high-speed machining.

JIG Tool
According to DIN standards, only the area marked with ※ in

the hollow shank needs to be finished. However, MST pro-
vides perfect finishing for all areas after heat treatment in
Turning mill order to improve balance.
Sharable ※ Pre-balanced
design
Information
Technical
Voluminous variety
G HSK Shank
P. 125
Machining center
70
SET SCREW HOLDERS FOR ROUND SHANK
ANGLE HEAD
CC type for through-spindle coolant
L
H1
M
D C
T63ーCC32ー90
M/C Tool
■Option
CODE L φD φC H1 M Kg ●Sleeve for set screw holder ( SS )
■Std. Access.
T40 ーCC32ー 90 90 32 58 62 M12 1.2 ●Coolant duct→P.110
T50 ーCC32ー 85 85 32 62 62 M12 1.4 ■Note
●Available for both boring bar and indexable drill.
T63 ーCC32ー 90 90 32 62 62 M12 1.6
ーCC40ー100 100 40 68 72 2
T100ーCC40ー105 105 40 82 72 M12 4.5

ーCC50ー115 115 50 92 82 M14 5.3
for Turning Mill

CN type for nozzle-coolant
L
H1 Detent plug A
General Purpose
M10
Tool
D C
Detent plug B
T63ーCN32ー95
■Option
CODE L φD φC H1 M Kg ●Sleeve for set screw holder ( SS )
■Std. Access.
T40 ーCN32ー 95
JIG
95 32 70 62 M12 2 ●Coolant duct→P.110　
●Detent plug for a nozzle A ＝Set screw ( M5ー12L )
T50 ーCN32ー100 100 32 70 62 M12 2.1 ●Detent plug for Center through B ＝Set screw( M5ー5L )
T63 ーCN32ー 95 95 32 70 62 M12 2.2 ■Note
　　ーCN40ー105 105 40 78 71 2.7 ●The coolant nozzle direction is adjustable. 　
●Nozzle-coolant type is available for through-spindle coolant
T100ーCN40ー115 115 40 82 72 M12 4.9 ●Available for both boring bar and indexable drill.
ーCN50ー125 125 50 92 82 M14 5.8
Equipment
Sleeve for set screw holders Measuring
Maintenance Tool
L 6
G M4
C2 D C1
H1
CODE L φD φC1 φC2 H1 G

SS32ー 8 55 8 38 32 35 M　6
Wire EDM fixture
ー10 10 40 M　8
ー12 12 45
JIG Tool
ー16 16 50
ー20 20
ー25 25 58 ※
SS40ー 8 60 8 46 40 35 M　6
ー10 10 40 M　8
ー12 12 45
ー16 16 50
ー20 20 M10
Information
Technical
ー25 25 58
ー32 32 62 ※
■Note
●Items marked with * in the G section of the list means they are screw-tightening type.
●Available for both boring bar and indexiable drill.
71
INSERT HOLDERS FOR SQUARE-SHANK
ANGLE HEAD
SV type for external turning and cutting off

(LA) A1 A2
L L1 M A3
Q
B3
B1
B2
T63ーSV2525Rー105 L2
(LB)
M/C Tool
CODE L L1 L2 (LA) (LB) A1 A2 A3 B1 B2 B3 M Q
T40 ーSV2020Rー 90 90 15 60 120 90 24.5 39 20 25 22 20 M10 78 1.5

ーSV2020Lー 90
T50 ーSV2020Rー 95 95 15 60 125 90 25 43.5 20 25 25 20 M10 87 1.9
ーSV2020Lー 95
T63 ーSV2020Rー105 105 20 70 135 100 32 45 20 33 32 20 M12 90 2.7
ーSV2020Lー105
for Turning Mill
ーSV2525Rー105※ 53.5 25 38 25 108 3.1

ーSV2525Lー105※
ーSV2525Rー105D 105 135 45 28 90 2.7
ーSV2525Lー105D
ーSV2525Rー115 115 145 53.5 38 108 3.3
General Purpose
ーSV2525Lー115
T100ーSV2525Rー150 150 20 70 190 150 37 59 25 48 43 25 M12 118 9.1
Tool
ーSV2525Lー150
ーSV3232Rー150 25 100 195 145 40 68.5 32 47 32 M14 137 9.3
ーSV3232Lー150
■ Std. Access. ■Caution
●Coolant duct→P.110 ●The maximum coolant pressure for the nozzle on the holder is 1.5MPA.
■ Note ●The holder marked with ※ in the chart cannot be installed on the Mazak
JIG
●The coolant nozzle direction is adjustable. INTEGREX I and J series.
SA type for external / face turning

The multi-inserts type holder reduces using holders quantity, it saves A.T.C. magazine pot.
Equipment
Measuring
(LA) A1 A2
L M12 25
L1
25 B1
Maintenance Tool
B2
T63ーSA2525ー105
(LB) Q
CODE L L1 (LA) (LB) A1 A2 B1 B2 Q
T63 ーSA2525ー105※ 105 70 135 100 32 54 38 38 108 3.7

　　　　　　ー115
Wire EDM fixture
115 145
T100ーSA2525ー150
JIG Tool
150 70 185 105 37 59 48 48 118 9.3

●Coolant duct→P.110 ●The maximum coolant pressure for the nozzle on the holder is 1.5MPa.
●Detent plug for a nozzle＝Set screw（M5ー12L) (Ex.) When using only ●The holder marked with ※ in the chart cannot be installed on the Mazak
right-hand, plug the nozzle on the left-hand side. INTEGREX I and J series.
■ Note
●The coolant nozzle direction is adjustable.
Information
Technical
72
SB type for external / face turning
ANGLE HEAD
82
32 40
L 25 120
60 M12
44.5
44.5
T63ーSB2525ー95
90
M/C Tool
■ Std. Access.
CODE L Kg ●Coolant duct→P.110
（M5ー12L) (Ex.) When using only right-hand, plug the nozzle on
●Detent plug for a nozzle＝Set screw
T63ーSB2525ー 95※ 95 3.2
the left-hand side.
■ Note
ー105 105 ●The coolant nozzle direction is adjustable.
■Caution
●The maximum coolant pressure for the nozzle on the holder is 1.5MPa.
●The holder marked with ※ in the chart cannot be installed on the Mazak INTEGREX I and J series.

for Turning Mill
SC type for external / face turning
(A1) (A2)
(LA) M A3 Q
(LB)
B3
General Purpose
B1
Tool
B2
L1
T63ーSC2020Rー105
L
CODE L L1 (LA) (LB) (A1) (A2) A3 B1 B2 B3 M Q
T40 ーSC1616Rー 90 90 60 110 80 38 38 16 30 38.5 16 M10 77 1.7

T50 ーSC2020Rー 95 95 60 125 90 44.5 44.5 20 35 45 20 M10 90 2.4
JIG
T63 ーSC2020Rー105 105 70 140 105 44.5 44.5 20 35 45 20 M12 90 3.0
T100ーSC2525Rー150 150 70 185 105 59 59 25 48 59 25 M12 108 9.7
■ Std. Access. ■ Note ■Caution
●Coolant duct→P.110 ●The coolant nozzle direction is ●The maximum coolant pressure for the
●Detent plug for a nozzle＝Set screw(M5ー12L) adjustable. nozzle on the holder is 1.5MPa.
Equipment
Measuring
SN type for external / face turning
(LA) A1 A2
L A3
Q
Maintenance Tool
B1
(L
B)
T63ーSN2525Rー110 B2
M B3
■ Std. Access.
CODE L (LA) (LB) A1 A2 A3 B1 B2 B3 M Q ●Coolant duct→P.110
Wire EDM fixture
■ Note
T40 ーSN2020Rー100 100 125 80 25 40 20 32 32 20 M10 80 1.7 ●The coolant nozzle
JIG Tool
T50 ーSN2020Rー110 110 135 85 25 45 20 35 35 20 M10 90 2.2 direction is adjustable.

■Caution
T63 ーSN2020Rー110 110 135 85 25 45 20 35 35 20 M10 90 2.5 ●The maximum coolant
　　ーSN2020Lー110 pressure for the nozzle
on the holder is 1.5MPa.
　　ーSN2525Rー110 140 105 32 53 25 39 39 25 M12 106 3.2
　　ーSN2525Lー110
T100ーSN2525Rー135 135 165 105 32 54 25 43 43 25 M12 108 6.1
Information
Technical
　　ーSN2525Lー135
　　ーSN3232Rー135 175 120 37 68.5 32 48 32 M14 137 7.2
　　ーSN3232Lー135
73
SH type for face turning
ANGLE HEAD
(LA) A1 A2
L
(LB)
M
B1
(LB)
B3
B2 Q
T63ーSH2525ー90
CODE L (LA) (LB) A1 A2 B1 B2 B3 M Q
T40 ーSH2020ー 75 75 79 70 25 20 25 25 20 M12 80 1.2

M/C Tool
　　　　　　ー120 120 124 1.6

T50 ーSH2020ー 90 90 94 75 25 20 27.5 27.5 20 M12 90 1.8
　　　　　　ー120 120 124 2.3
T63 ーSH2020ー 90 90 94 80 32 20 30 30 20 M12 90 2.5
ーSH2525ー 90 97 100 25 40.5 40.5 25 108 2.9
　　　　　　ー120 120 127 3.6
T100ーSH2525ー105 105 112 120 32 25 48 48 25 M12 118 6.1

for Turning Mill
　　　　　　ー150 150 157 8.8

ーSH3232ー105 105 113 145 40 32 57 57 32 M14 148 7.7
●Coolant duct→P.110 ●Detent plug for a nozzle＝Set screw(M5ー12L) (Ex.) ●The maximum coolant pressure for the nozzle on the holder is 1.5MPa.
When using only right-hand, plug the nozzle on the left-hand side.
■ Note
General Purpose
●The coolant nozzle direction is adjustable.

Tool
BLANK TOOL CHECKING ARBOR

(For additional machining)
L±0.05 L1 0±0.01
L
JIG
±0.002 A
L1
A° A
A
C T63ーCAAX52ー150
D±0.05
T63ーBL75ー200
Equipment
Measuring
CODE L L1 φC A° CODE L L1 φD A
Kg Kg
T40 ーBL 32ー 35 35 15 32 0 0.3 T40 ーCAAX32ー150 150 10 32 60 1.1

　　ーBL 48ー120 120 97 48 15 1.6 T50 ーCAAX40ー150 150 10 40 70 1.7
　　ーBL 95ー 75 75 52 95 2.9 T63 ーCAAX52ー150 150 10 52 90 2.9
Maintenance Tool
T50 ーBL 40ー 42 42 16 40 0 0.6 T100ーCAAX60ー250 250 12 60 110 7.2

　　ーBL 62ー150 150 120 62 15 3.3 ■Std. Access.
●Coolant duct→P.110
　　ーBL105ー 90 90 60 105 4.3 ●Special case
T63 ーBL 52ー 45 45 19 52 0 1.0 ■Usage
1. Measure the concentricity of the spindle using cylinder area.
　　ーBL 75ー200 200 168 75 15 6.6 2. When using a flat surface, adjustment of the insert position can be verified.
3. Confirm and adjust the absolute dimension in the X direction.
　　ーBL115ー 90 90 58 115 5.5
Wire EDM fixture
4. Measure the bending of the spindle using flange surface area.

5. Can be used with tool presetter.
T100ーBL 87ー 45 45 16 87 0 2.8
JIG Tool
■Note
　　ーBL100ー200 200 166 100 12.6 ●ATC repeatability can be observed.
●Flatness of square test bar for the datum A is within ±0.01mm.
　　ーBL118ー120 120 86 118 15 9.7
■Std. Access.
●Coolant duct→P.110
■Note
●Material: SNCM439 , Heat treatment hardness： 43HRC±2
Information
Technical
●Hardening depth indicates depth to the center.

■Caution
●If heat treatment is applied again to a holder produced from a blank tool, the
original taper area may be deformed. Therefore, please do not apply heat
treatment.
74
Universal Facing Boring Head
ANGLE HEAD
Universal Boring Head allows any
applications just using this holder. Shank
MU H50-MU-S4 / S5
Grooving Facing Inversed spot Boring

facing
M/C Tool
Boring head
MUーS5
Automatic feeding using the machine spindle rotation.
General Purpose HSK-T Tooling Systems

High accuracy and Long life
for Turning Mill

After grinding process is completed, a worker
scrapes the work-piece by hand, which leads to
higher accuracy and longer life.
Max. Boring diameter : φ920
Tool
Specification
We guarantee a slide traverse accuracy of 5μm squareness at 50L, and we provide thorough overhaul and repair after-service.
Max. Boring Max. slide Automatic Fine adjustment Fast return Max. rotation
Type
diameter movement feed speed (one graduation) screw min -1 Kg
0.005
JIG
MU φ260 　48 0.05 / Rotation Vernier scale ー 600 2.1
0.001
MUーS4 φ400 　52 0.005 3.0 / Rotation 400 7

0.02～0.24
　 / Rotation
Equipment
Measuring
12 speeds
MUーS5 φ620 112 8.7
MUーS6H φ800 140 250 21

Maintenance Tool
MUーS6 φ920 210 23.3
Parts name
MU type MU- S type MU type MUー S type
Wire EDM fixture
JIG Tool
Retainer ring
Fast release pin Stop rod
Release ring Feed pin
Fine adjustment dial Fast return Feed control ring
screw
Feed control ring Feed adjusting pin
Feed pin Slide adjusting screw

Stopper
Slide tightening screw
Information
Technical
Stop pin Insert clamping screw

Bore for insert
Stop pin Slide
75
Combination of shank and head
ANGLE HEAD
g
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6
Cotter slot
Shank
L L
L L L L
*Please inform us when the cotter slot is needed

(please tell us the machine brand and model).
CODE Fig. L g CODE Fig. L g CODE Fig. L

BT40 ーMU 1 49 ー BT50 ーMUーS4/S5 1 73.5 ー BT50 ーMUーS6H/S6 1 77
H 40 ーMU 2 34 H 50 ーMUーS4/S5 2 44.5 NT50UーMUーS6H/S6 2 28.2
M/C Tool
NT40UーMU 3 15 NT40UーMUーS4/S5 3 17.1 MT 6 ーMUーS6H/S6 (Tang type) 3 35

MT 3 ーMU (Tang type) 4 18 NT50UーMUーS4/S5 18.7
MT 4 ーMU (Tang type) 19.5 MT 4 ーMUーS4/S5 (Tang type) 4 28
MT 3 ーMU (Screw type) 5 18 M12 MT 5 ーMUーS4/S5(Tang type)
MT 4 ーMU (Screw type) 19.5 M16 MT 6 ーMUーS4/S5(Tang type) 29.5
S 32 ーMUー20 6 20 ー MT 4 ーMUーS4/S5 (Screw type) 5 27 M16
S 42 ーMUー20
Adaptation flange
13
General Purpose HSK-T Tooling Systems
for Turning Mill
CODE
Adaptation flange
MU MU-S4 MU-S5 MU-S6H MU-S6
Boring 83 191 191

141 141
head
99.75 99.75
Tool
φ85 110
160 210 286
(φ115)
(φ170) (φ224) (φ297 )
Set content
Boring head
Accessories (set) MU MU-S4 MU-S5 MU-S6H MU-S6
JIG
Boring head MUーH MUーS4ーH MUーS5ーH MUーS6HーH MUーS6ーH
Boring bar Effective Effective Effective Effective

Diameter×length length Q'ty Diameter×length length Q'ty Diameter×length length Q'ty Diameter×length Effective length Q'ty Diameter×length length Q'ty
18× 60 30 1 22× 85 45 1 22× 85 45 1 30×120 70 1 30×120 70 1
18× 90 60 1 22×125 85 1 22×125 85 1 30×200 150 1 30×200 150 1
18×120 90 1 22×165 125 1 22×165 125 1 30×260 210 1 30×260 210 1
Equipment
Measuring
Boring bar holder Diameter×Shank length Q'ty Diameter×Shank length Q'ty Diameter×Shank length Q'ty Diameter×Shank length Q'ty Diameter×Shank length Q'ty
18× 82 1 22× 98 3 22× 98 2 30×120 2 30×120 2
18×120 1 22×180 1 22×130 1 30×220 1 30×220 1
ーー 22×229 1 30×360 1 30×360 1
Adjustment collar for Inner diameter×Thickness Q'ty Inner diameter×Thickness Q'ty Inner diameter×Thickness Q'ty Inner diameter×Thickness Q'ty
boring bar holder 22×10 1 22×10 1 30×10 1 30×10 1
22×20 1 22×20 1 30×20 1 30×20 1
Maintenance Tool
ー
22×60 1 22×45 1 30×40 1 30×40 1
ー 22×60 1 30×70 1 30×70 1
ーー 30×80 1 30×80 1
Draw bolt for boring Diameter×length Q'ty Diameter×length Q'ty Diameter×length Q'ty Diameter×length Q'ty
ー
bar holder M12×40 1 M12×89 1 M16×80 1 M16×120 1
Clamping sleeve Outer dia.× Inner dia. Q'ty Outer dia.× Inner dia. Q'ty Outer dia.× Inner dia. Q'ty Outer dia.× Inner dia. Q'ty Outer dia.× Inner dia. Q'ty
18× 8 1 22× 8 1 22× 8 1 22×12 1 22×12 1
Wire EDM fixture
18×10 1 22×10 1 22×10 1 22×14 1 22×14 1

JIG Tool
18×12 1 22×12 1 22×12 1 22×18 1 22×18 1

18×14 1 22×14 1 22×14 1 30×22ーA 1 30×22ーA 1
ー 22×18 1 22×18 1 30×22ーB 1 30×22ーB 1
Insert Material □ × length Q'ty □ × length Q'ty □ × length Q'ty □ × length Q'ty □ × length Q'ty
HSS □ 6×30LーH 3 □ 6×40LーH 3 □ 6×40LーH 3 □ 10×60LーH 3 □10×60LーH 3
Carbide □ 6×30LーC 1 □ 6×30LーC 1 □ 6×30LーC 1 □ 10×60LーC 1 □10×60LーC 1
Other accessories ●Stop rod ●Stop rod ●L wrench ●Stop rod ●Auxiliary bar
Information
Technical
●Spanner ●T handle wrench ●Spanner ●T handle wrench ●L wrench

●Knocking rod ●Connection for wrench ●Connection for wrench ●Spanner
●L wrench
■Note
● It is possible to purchase only the head part.
76
SMART GRIP
The award for excellence of the 29th
29th
ANGLE HEAD
medium and small-sized enterprises
Award excellent new innovative technologies
For metalworking WORK HOLDER SYSTEM and products.
This work-piece clamping system maximizes the

performance of your 5-axis machining center.
The HSK interface (between the head and the work-holder) and the dovetail clamping (between the
work-holder and the work-piece) create a compact design with less interference and high rigidity
for metal machining applications.
M/C Tool
The rigid system developed for metal machining.
No interference and superior accessibility!
Changing the work-piece is easy using a general-purpose robot.

for Turning Mill
General Purpose
Tool
Work-piece
Dovetail clamping
JIG
2-face
Equipment
Measuring
Support various work-
clamping Work holder
piece shapes.
HSK interface
Maintenance Tool
Head
Wire EDM fixture
JIG Tool
Information
Technical
77
2-face
clamping
ANGLE HEAD
Dovetail clamping system

Dovetail Conventional
■ Strong clamping with small clamping method
clamping
clamping area.
・Buy minimizing the clamping surface
of the work-piece, optimum tool holder
accessibility is possible.
3mm Clamping area
・It allows stable and powerful machin- Large
ing from various directions without the
work-piece rising.
M/C Tool
・Clamps two faces of a work-piece strongly with dovetail.

Dovetail clamping ・Cost savings due to minimum clamping area.
HSK interface
Work holder ■Superior bending rigidity
■ Strong clamping The dovetail clamping work-holder with the HSK head works
Uses the HSK-A type, time-proven with heavy-duty milling.
tool holder shank to connect the 6300N

for Turning Mill
head and the work-piece holder.

300
Head Work holder Carbide
drill
Clamping
CODE
force ( KN )
General Purpose
S45C 25
HSK-A40 10
φ25
Tool
HSK-A63 20 N ：1273min-1
HSK two Dovetail F ：190mm/min
HSK-A100 30 Head
face contact clamping
For Automation (Hydraulic automatic clamping head)

The hydraulic clamping design allows for automated work-piece changing, and makes it possible for you to combine your machining
centers with robots to create a fully-automated system.
JIG
・HSK interface allows stable and continuous operation.

・Fully-automated systems can be built using the
general-purpose robot.
Equipment
・Improve operation availability of 5-axis machine.

Measuring
Hydraulic automatic
clamping head
Quick work-piece changing (Manual clamping head )

.
Off-line setup in advance allows quick work-piece changing. 10-sec
Maintenance Tool
Minimizing machine downtime.
Clamping
Unclamping
Wire EDM fixture
JIG Tool
High positioning accuracy Offsetting the work-piece position in the rotating

direction using a touch probe
Concentricity Rotating direction
Measuring two locations along the work-piece side face using a touch
2μm/L 0.1~0.3mm/D
probe enables you to offset the machine table angle easily.
Z axis direction
L Y Y
1μm
Information
Technical
D
L= A40 40 Correcting BLUM
3×D A63 63 angle High accuracy
D
A100 100 touch probe
X X
78
System
ANGLE HEAD
Work-piece
Dovetail
Direct
clamping
M/C Tool
P.86
Work holder
Dovetail clamping Dovetail Vise Flange clamping Collet holder

P.82 P.84 P.83 P.32
Dovetail clamping

for Turning Mill
Automatic Manual
clamping clamping
P.80 P.81
Head
SIZE:
HSK-A40
A63 Hydraulic automatic The manual Flange clamping
General Purpose
A100 clamping head clamping head
Tool
Mounting plate
JIG
Machine table
Overview of automation The system development with the system integrator.
Equipment
Measuring
Clamping / Seating confirmation / Unclamping
Seating confirmation signal
Robot 5-axis machining center

Maintenance Tool
Work-piece Operation unit
shelf
Loading and unloading
of the work holder Tool
Robot holder
finger Control
unit
SMART
GRIP
Wire EDM fixture
JIG Tool
Robot
control unit
Pump
Clamping / Unclamping unit
● We can provide the Smart Grip operation unit, pump unit,work-
stocker, robot finger and tool holder.
Seating / Blow
Information
Technical
● Required specifications at 5-axis machining center, plumbing of 2 Air

channels of hydraulic and 2 channels of pneumatic are required. Hydraulic
● Contact us for details. Signal
79
Hydraulic automatic clamping head (Automatic exchange)
ANGLE HEAD
Hydraulic un-clamping
connection port P.C.D. 1
Air-sensor P.C.D. 2
connection port Air purge
Work holder Air-sensor connection port
blowing hole
8-G ( Clamp bolt ) 6-air purge hole

Hydraulic clamping
connection port
M/C Tool
D ( HSK size )
F L1
C
10 L
HSK- A40 HSK- A63 HSK- A100 S
F70S45ーA40ー64 F100S65ーA63ー89 F140S100ーA100ー139 S - 0.4
Shank Clamping force Max. loading

CODE L φD φD1 φS (g6) L1 G P.C.D. ① P.C.D. ② 3.5MPa Hydraulic weight
for Turning Mill
type （kN）（kg）
F70S45 ーA40 ー 64 HSKーA40 64 40 70 45 35 M 5×20 55 35 6 50 1.1

F100S65 ーA63 ー 89 HSKーA63 89 63 100 65 50 M 6×30 80 55 24 140 3.1
F140S100ーA100ー139 HSKーA100 139 100 140 100 80 M 8×45 120 88 55 640 9.7
■Note
General Purpose
● Hydraulic capacity: 3.5MPa

Tool
Specification
Clamping Unclamping
3.5 MPa
Work holder
Seating confir- HSK two face Low-pressure hydraulic (3.5MPa)

JIG
mation surface contact system for clamping/unclamping.

Can be used with an air booster pump.
Head
Seating
Mounting plate detection air
Detecting poor work

Equipment
Measuring
Clamping holder seating

(Hydraulic) Unclamping
(Hydraulic)
Air blow
Seating
confirmation Prevents the intake of cutting
Maintenance Tool
(pneumatic) chips into the head.

Blow
( pneumatic)
Mounting plate
A mounting plate is required for the hydraulic clamping-type auto- Hydraulic automatic
head. The mounting plate is the adapter for installation on the clamping head
machine table and for connecting the hydraulic and pneumatic lines.
Wire EDM fixture
JIG Tool
Mounting plate
■Note
● Please provide us with a detailed drawing of your machine table and the
Machine table
plumbing drawing of your hydraulic and pneumatic lines. We can design and
produce an exclusive mounting plate, so please contact us for more information.
Information
Technical
80
The Manual clamping head (Manual exchange)
ANGLE HEAD
Work holder
Manual
clamping
hole
8-G
P.C.D
D1（HSK size)
M/C Tool
L
L1
HSK- A40 HSK- A63 HSK- A100
F100H21-A40-50 F125H34-A63-70 F200H53-A100-110
D1

Clamping
CODE Shank type L φD φD1 L1 G P.C.D.
for Turning Mill

force ( kN )
F 100H21ーA40 ー 50 HSKーA40 50 50 100 25 M 6×30 55～ 85 10 1.7

F 125H34ーA63 ー 70 HSKーA63 70 80 125 30 M 8×35 80～100 20 3.8
F 200H53ーA100ー110 HSKーA100 110 125 200 50 M12×50 125～160 30 14
■Option
● Mounting plate
General Purpose
■Std access.
● T-handle wrench　● Mounting bolt×4pcs.
Tool
■Note
● The manual clamping hole on the work holder is required for mounting.
● When you can't install it directly on the machine table, please use the mounting plate.
● Contact us about the custom-made mounting plate for your machine table.
Mounting plate
JIG
In the case where you can’t mount the head directly to your machine table, please use this mounting plate.
We can supply a blank that is customizable and also manufacture a special mounting plate just for you.
For more information, please feel free to contact us.
Fig. 1 Fig. 2
Equipment
Measuring
8-M6 22 4-G1 8-M8 2 2 °3 0
°3 0 ' '
P.C.D 8-M12 45
8-M8 ° 4-G1
4-G2 P.C.D
P.C.D 4 5° 4-G2
4 5°
P.C.D
D H
Maintenance Tool
F200H50ーA63
The Manual clamping head

T
Applicable
CODE Fig. T φD φH G1 G2 P.C.D
head type
F160H32ーA40 HSK-A40 1 20 160 32 M 5×20 M 6×20 80～125 2.6
F200H32ーA40 25 200 M 8×25 M10×25 100～160 5
Wire EDM fixture
F160H50ーA63 HSK-A63 1 20 160 50 M 5×20 M 6×20 80～125 2.4

JIG Tool
F200H50ーA63 25 200 M 8×25 M10×25 100～160 4.7

F250H50ーA63 2 30 250 50 M10×30 M12×30 140～200 9.4
F250H80ーA100 HSK-A100 2 30 250 80 M10×30 M12×30 140～200 8.7 Mounting plate
Information
Technical
81
Work holder
ANGLE HEAD
Dovetail clamping
SW
L1
L
G
W C
M/C Tool
A63ーDOC25ー65
Example of work-piece mounting.

H2
CODE L L1 φC W H2 G SW 　
A40 ーDOC 17.5ー55 55 25 30 17.5 2 M 5 4 0.4

　ーDOC 25 ー55 28 40 25 3 M 6 5 0.6
　ーDOC 35 ー55 25 50 35 0.7

for Turning Mill
　ーDOC 50 ー60 60 30 70 50 5 M 8 6 1.2

A63 ーDOC 25 ー65 65 27 40 25 3 M 6 5 1.2
　ーDOC 35 ー65 50 35 1.3
　ーDOC 50 ー70 70 30 70 50 5 M 8 6 1.8
　ーDOC 70 ー75 75 35 100 70 M10 8 3
A100ーDOC 35 ー70
General Purpose
70 27 50 35 3 M 6 5 3.3
　ーDOC 50 ー75 75 32 70 50 5 M 8 6 3.8
Tool
　ーDOC 70 ー75 35 100 70 M10 8 5

　ーDOC100 ー85 85 40 140 100 10 7.7
■Note
● Dovetail grooving of the work-piece clamping area using an angular cutter is required prior to machining.
Angular cutter
For more information, please contact us.
Procedures for machining a work-piece

JIG
［Pre-machining］［Cut off the dovetail of the work-piece］

Equipment
Measuring
①Pre-machining a dovetail ②Inser t the dovetail into the ③ Cut off unnecessary portion.
on the work-piece using the dovetail groove, tighten it and
angular cutter. you are ready to machine.
Maintenance Tool
Dovetail grooving Details of dovetail dimensions
Angular P Holder type W H P SW SD

cutter W±0.1
SW(width) DOC 17.5 17.5 2.5 2.5 4 2
60°
SD(depth) DOC 25 25 3.5 6 2.5
H
DOC 35 35 5.5 8
Wire EDM fixture
DOC 50 50 5.5 9 10 4

JIG Tool
DOC 70 70 18 12
DOC100 100 10.5 26 15
Information
Technical
82
Dovetail vise A
ANGLE HEAD
Clamping jaw
12
W 15 42 S
L1 3 15 G
A63ーDOV110I
L
M/C Tool
CODE □S W G (depth) L L1
A63 ーDOV110I 110 36～ 80 24ーM8(10) 90 35 5.7 Angular cutter

A100ーDOV140I 140 36～110 52ーM8(10) 100 35 9.9 For more information, please contact us.
■Std.access.
● 8mm hex rench
■Note

● Work-piece clamping jaws move individually.
for Turning Mill

● Please use screw hole on the top face as necessary.
Dovetail vise B
General Purpose
Clamping jaw
Tool
G
90 110
W
L1 3 20 (4.5)
L B
JIG
A63ーDOV90 25×(Number of grooves- 1)
CODE Number of B W G (depth) L L1

grooves
A63 ーDOV 90 3 90 12～73 20ーM4(6) 85 35 3.8 Angular cutter

A100ーDOV140 5 140 12～73 30ーM4(6) 100 35 7.7
Equipment
Measuring
For more information, please contact us.
■Std.access.
● 8mm hex rench
■Note
● Work-piece clamping jaws move individually.
● Please use screw hole on the top face as necessary. Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
83
Flange clamping
ANGLE HEAD
L Fig. 1 Fig. 2 Fig. 3

6-d3
3-G 2 3-T3 6-d2
3-G 2 3-T2
D3 3-G 2 9-T1
D2
D1
h1
d D
h2
M/C Tool
G1
A63ーFP85ー50
CODE Fig. L φD φD1 φD2 φD3 φd h1 h2 T1 T2 T3 φd2 φ d3 G1 G2
A40 ーFP40 ー35 3 35 40 32 ーー 25 12 4 M4× 6 ーーーー M 6×15 M4× 8 0.3

＋0.053
　ーFP63 ー40 2 40 63 50 ＋0.020 M5 5.5 M 6×20 0.5
A63 ーFP63 ー45
3 45 63 50 ーー 40 13 5 M5× 8 ーーーー M10×20 M6×10 0.9

for Turning Mill
＋0.064
　ーFP85 ー50 2 50 85 73 ＋0.025 M6 6.6 M10×25 1.2
　ーFP110ー55 1 55 110 95 M6×9 M 8 9 M10×30 1.7
A100ーFP100ー55 3 55 100 85 ーー 70 17 7 M8×12 ーーーー M12×25 M8×16 3.0
＋0.076
　ーFP130ー65 2 65 130 115 ＋0.030 M8 9 M12×35 4.2
　ーFP160ー70 1 70 160 140 M8×12 M10 11 M12×40 5.3
General Purpose
■Std access.
● Center screw (G1) ×1pc. ● Set screw (G 2) ×3pcs.
Tool
● M6 special small head bolt (the head diameter size is the same as the M5 bolt. ) ×3 pcs. ( A63-FP85-50 / A63-FP110-55 )
※Regular M6 cap screw doesn't fit.

■Option
● Adapter →P.85 ● Positioner boss
■Note
● Use the G2 set screw when you use the center blot to clamp the work-piece.
When you need whirl-stop machining of a work-piece, make a flat surface on the work-piece and clamp it using a set screw (G2).
JIG
Positioner boss (Flange clamping)

Use it when you need centering.
Work-piece
Equipment
Measuring
CODE Holder type φD4 φD5 h D5

h Set screw (G 2)
IR15ーA40 FP HSK-A40 15 25 15 0.05 3 D4
0
-0.027
IR25ーA63 FP HSK-A63 25 40 16 0.1

0
-0.033 Chamfering surface (B 1)
Positioner boss
Maintenance Tool
IR40ーA100FP HSK-A100 40 70 20 0.5

0
-0.039
Work holder Center bolt(G 1)
IR15-A40-FP
■Note
● When you do not want the work-piece to rotate, make a flat surface on the
O.D. (B1) of the boss, and fix it using a set screw (G2).
Work-piece mounting methods

Wire EDM fixture
JIG Tool
①Center bolt type ②Flange bolt type ③Flange tap type ④Using a adapter
Adapter
Information
Technical
The center bolt clamps the work- Bolts clamp the work-piece The work-piece is clamped using The small work-piece is mounted
piece from behind the work through the work holder bolt the thread on the work holder. using a adapter with a large
holder taper shank. holes. Tapping is required on the Tapping is required on the work- diameter holder.
work-piece. piece.
84
Work-piece
Adapter (Flange clamping) Adapter
ANGLE HEAD
・Used with the flange clamping work holder.　
・Minimizing clamping area for a small-size work-piece reduces the machining interference area. Work holder
( Flange
Fig. 1 Fig. 2 Center clamping )
Set screw ( G2 ) bolt ( G1)
H2 9-T1
9-T1 H2 D1
D D1
D
H1 H1 d
d
Center Fixing
RSーA63ーA40 Fixing H bolt( G3 )
bolt ( G1 ) H
M/C Tool
bolt ( G3 )
Work Holder Work Holder
■Std.access.
● Center screw ( G1 ）
CODE Work holder Fig. φD φD1 φd H1 H2 H T1 G1 G2 G3 × 1pc.
● Set screw ( G 2 ） × 3pcs.
● Fixing bolt ( G 3 ）× 3pcs.
RSーA63 ーA40 A63 ーFP 63ー45 1 40 32 25 12 4 50 M4×6 M 6×20 M4× 8 M5×16 0.5
ーFP 85ー50 ＋0.053 ■Note
＋0.020 ● Affix the work-piece with the
ーFP110ー55
center bolt(G1). When you do
RSーA100ーA40 A100ーFP100ー55 2 40 32 25 12 4 60 M4×6 M 6×20 M4× 8 M8×25 1.5 not want the work-piece to
ーFP130ー65 ＋0.053 rotate, secure the chamfering

＋0.020 surface using a set screw.
ーFP160ー70
for Turning Mill

RSーA100ーA63 A100ーFP100ー55 1 63 50 40 13 5 55 M5×8 M10×20 M6×10 M8×25 1.7
ーFP130ー65 ＋0.064
＋0.025
ーFP160ー70
L
Side clamp A L1
G3
General Purpose
G1 B
Tool
G2
C
H1 W
H
W1
A63ーSCS10ー55
W2
JIG
■Std.access.
CODE W W1 W2 Ｂ L L1 φC H H1 Ｇ1 Ｇ2 Ｇ3 ● Large screw(G1)
( Bolt ) ×2 pcs.
A40 ーSCS10ー40 5 ∼ 10 13 18.6 30 40 11 39 4.5 ー M 6× L10 ー M 6 0.5

A63 ーSCS10ー55 5 ∼ 10 20 23.5 50 55 21 62 7.5 17 M10 × L15 M5 M10 1.1
ーSCS20ー55 15 ∼ 20 25 28.5
Equipment
Measuring
A100ーSCS20ー70 12 ∼ 20 29.5 34 80 70 26 99 9 20 M12 × L20 M5 M12 3.6
ーSCS30ー70 22 ∼ 30 34.5 39
Side clamp B
H
Maintenance Tool
φC H2
G1(Large screw) H1
□W ( Size of work-piece )
A63ーSCD30ー70 L1 G2(Small screw)

L G1 ( Adjust screw )
Wire EDM fixture
■Std.access.
JIG Tool
CODE □W L L1 φC ＨＨ1 Ｈ2 Ｇ1 Ｇ2 Ｇ3 ● Large screw(G1)
×4 pcs.
A40 ーSCD20ー55 15 ∼ 20 55 30 49 25 11 ー M 8×16 M4 12 M10 0.5
A63 ーSCD20ー65 15 ∼ 20 65 30 49 25 11 ー M 8×16 M4×12 M10 1.2
ーSCD25ー70 20 ∼ 25 70 35 56 30 8 20 1.3
ーSCD30ー70 25 ∼ 30 44 62 35 9 24 M10×20 M5×12 1.4
ーSCD40ー85 35 ∼ 40 85 52 76 45 12 30 M12×20 M6×12 1.9
Information
A100ーSCD20ー70
Technical
15 ∼ 20 70 30 49 25 11 ー M 8×16 M4×12 M10 3

ーSCD25ー75 20 ∼ 25 75 35 56 30 8 20 3.4
ーSCD30ー80 25 ∼ 30 80 62 35 9 24 M10×20 M5×12 3.5
ーSCD40ー90 35 ∼ 40 90 45 76 45 12 30 M12×20 M6×12 3.9
85
Maximum cutting force
ANGLE HEAD
Using the chart below, please confirm the machining load limits for your work-piece size (length L and dia R.). When you start
machining using the Smart Grip, reduce the machining load 60～80% based upon the chart. Please choose the optimum work
16000
holder for your machining conditions.
HSK-A100
14000 HSK-A63
L (mm) R(mm) HSK-A40
12000
F [N] F [N]
10000
8000
6000
M/C Tool
4000
2000
0 50 100 150 200 250 300

L (mm)
16000 100000
HSK-A100 HSK-A100
for Turning Mill
14000 HSK-A63 90000 HSK-A63

HSK-A40
Maximum cutting force ( N )

HSK-A40
80000
12000
70000
10000
60000
8000 50000
40000
General Purpose
6000
30000
4000
Tool
20000
2000
10000
0 50 100 150 200 250 300 0 25 50 75 100 125 150

L (mm) R (mm)
(mm)
L (mm) R
100000
JIG
HSK-A100
90000
(ex) The value of maximum cutting force
HSK-A63
HSK-A40
80000 16000
Maximum cutting force?
HSK-A100
70000 14000 HSK-A63
HSK-A40
60000 175mm 12000
Equipment
Measuring
50000 10000
40000 8000
30000 6000
20000 4000
4000
10000 2000
Maintenance Tool
0 25 50 75 100 125 150 0 50 100 150 175 200 250 300
R (mm) L L(mm)
(mm)
Work holder Please

100000 confirm the machining load limit value (N) of the
( HSK-A63 ) HSK-A63
90000 with L=175mm from the chart. HSK-A100
HSK-A63
Head ⇒ Max.
80000
4,000N (please start at 2,400～3,200N)
HSK-A40
70000
Wire EDM fixture
60000
JIG Tool
50000
40000
30000
20000
10000
0 25 50 75 100 125 150

Information
Technical
R (mm)
86
Direct clamping (Direct-mounting type on the machine table)
ANGLE HEAD
・It clamps a work-piece with the shortest length thanks to direct
mounting on the table, and provides a larger machining area.
Ideal for clamping
high work-piece
The shortest
Dovetail clamping
55
Dovetail clamping
H2
M/C Tool
φ140 4-M10 φ80
P.C.D. 120 W C
F140S80-DOC50-55 H1
10 H
■Option

CODE H H1 H2 φC W ● Mounting plate
for Turning Mill

■Std Access.
F140S80ーDOC 17.5ー60 60 45 2 30 17.5 2.5 ● Fixing bolt×4 pcs.
ーDOC 25 ー60 3 40 25 2.6 ■Note

● Dovetail grooving of the work-piece clamping area using an
ーDOC 35 ー55 55 40 50 35 2.8

●
angular cutter is required prior to machining.
When you can't install it directly on the machine table, please use
ーDOC 50 ー55 5 70 50 3.4 the mounting plate.
ーDOC 70 ー55 100 70 4.7 Angular cutter
General Purpose
ーDOC100 ー55 10 140 100 5.5 For more information, please contact us.
Tool
Flange clamping Fig. 1 Fig. 2 Fig. 3
3-G2 6-d3 3-T3
h1 3-G2 6-d2 3-T2
D3 3-G2 9-T
D2
D1
JIG
4-M10
φ140 P.C.D. φ80 d C
120
H1
10 H
F140S80-FP85-50
Equipment
Measuring
CODE Fig. H H1 φC φD1 φ D2 φD3 φd h1 T1 T2 T3 d2 d3 G2
F140S80ーFP 63ー50 3 50 25 63 50 ーー 40 13 M5× 8 ーーーー M6×10 2.6

ーFP 85ー50 2 85 73 M6 6.6 3.1
ーFP110ー70 1 70 45 110 95 M6×9 M8 9 3.7
Maintenance Tool
ーFP130ー75 2 75 130 85 115 ー 70 17 M8×12 M8 ー 9 ー M8×16 5.5

■Option ■Note
● Mounting plate ● Positioner boss →P.84 ● Adapter →P.85 ● When you can't install it directly on the machine table, please use the mounting plate.
● Contact us about the custom-made products for your machining table.

■Std Access.
● Fixing bolt×4 pcs.
Mounting plate
Wire EDM fixture
JIG Tool
The mounting plate is required to install the direct clamping type, Smart Grip, on the machine table. We can design and produce an exclusive
mounting plate to meet your needs, so please contact us for more information.
4-M12
P.C.D.170
25
4-M10
P.C.D.160
Information
Technical
φ200 φ80
CODE
8-M10
F200H80ーMP140ー25 4.3 P.C.D.120
87
Goo Checker
ANGLE HEAD
Set up the original point on the Z axis / measuring tool for reference position
Easy and accurate Z-axis origin setting!

It is easy to accurately set the Z-axis origin of the machining ZPB
center, the reference surface of work-piece, and the jig fixture.
ZPM
M/C Tool
t
l en
tua e m
A c a su r
me
for Turning Mill
Actual
measurement
Measuring the steps are easy

General Purpose
Accurate measuring of the distance from the Z-axis origin to

the reference surface of the work-piece and jig fixture is easy.
Tool
Z-axis origin X ----.----

Y ----.----
120.001
Machine Z -200.345
Distance from traveling
Z-axis origin to amount
ce. work-piece
fe re n datum surface.
ter
s in Master block 200.345+120.001= 120.001
Les
120.001
JIG
320.346 Actual
measurement
Fiducial surface
Available for using 5-axis machine. workpiece
Equipment
Measuring
Sharable Z-axis origin for several

machining centers Flatness check Step measurement
After measuring the distance from the Z-axis origin to the Precise measurement Measurement for steps on
table surface of each machining center and correcting any for flatness. the work-piece.
Maintenance Tool
variations, multiple machining centers can share the tool

holders and programming.
s
ol d er
to ol h
ing
ー? +?
r
Sh a
to ur
Wire EDM fixture
n eed all yo
No sure ？
JIG Tool
mea hines workpiece

Correcting actual m ac
measurement
ra m
variations p rog
ring
Sh a
le
rab
Information
Sha
Technical
88
Goo Checker ZPM type ( ZPM )
ANGLE HEAD
Thanks to its compact design, interference
Easy confirmation of actual value (self-check function)
is reduced , making it the optimum holder
1. Attach the master block to
for compact machining centers.
the holder, and tighten the Actual
screw until it stops. 120.001
measurement
2. Adjust the dial gauge to "0". 0 Actual

measurement
CODE Fig. L L1
M/C Tool
Master block
BT30 ーZPMー130 1 130 100 1.0 (Origin setting block)
　　　　　　ー165 165 135 1.2
BT40 ーZPMー150 2 150 120 1.3 Fig. 1
　　　　　　ー210 210 180 1.5 48
BT50 ーZPMー180 2 180 150 2.9
L1 16 20
　　　　　　ー240 240 210 4.1 36
L
A63 ーZPMー150

3 150 120 1.2
for Turning Mill

　　　　　　ー210 210 180 1.5
A100 ーZPMー180 3 180 150 2.5
Fig. 2
　　　　　　ー240 240 210 3.8
48
E32 ーZPMー120 3 120 90 0.7
　　　　　　ー165 165 135 1.0 L1 16 20
E40 ーZPMー120 3 120 90 0.8 L 36
General Purpose
　　　　　　ー180 180 150 1.1
E50 ーZPMー150 3 150 120 1.0
Tool
　　　　　　ー195 195 165 1.3 Fig. 3
F63 ーZPMー150 3 150 120 1.1 48

　　　　　　ー210 210 180 1.3
L1 16 20
DN40 ーZPMー150 2 150 120 1.3 36
L
DN50 ーZPMー180 180 150 2.9
CT40 ーZPMー150 2 150 120 1.3
JIG
CT50 ーZPMー240 240 210 4.1
●Retention knob ( BT/DIN/CAT. ) → P.67 ●A.T.C is not available. (except for BT30)
■Std. Access.
●Master block　
●Indicator, 1/ 1000 reading
Equipment
Measuring
Goo Checker ZPB type (ZPB)
High reliability due to its machined solid structure
φ3~190 Maintenance Tool
70 φ60
MAX.330
Actual
measurement Actual measurement
200.003
Wire EDM fixture

JIG Tool
Indicator 200m±0.005
Master cap
CODE
BT40ーZPBー200 3.3
Centering arm BT50ーZPBー200 5.2
Information
Technical
■Option
Test indicator ●Retention knob→P.67　
Usage example for ■Std. Access.
test indicator ●Indicator, 1/ 1000 reading ●Test Indicator, 2/ 1000 reading
●Centering arm　●Master cap　 ●Wooden box
89
Centering bar
ANGLE HEAD
To identify workpiece datum position
CODE
φ6
ST6ーCEB102
25
φ5
68
φ2
M/C Tool
φ10 4.5
Usage
①Rotate a spindle in low-speed rotation ② Contact the stylus carefully with a work- ③You can find the alignment between the
(450~600 min-1) piece by micro feeding until it doesn't have a machine spindle center and the work-piece
swing. edge face after the stylus moves another
1mm(the radius of dia.2mm stylus).
Measuring
instrument tool
for Turning Mill
holder Rapid eccentricity
Centering Bar
General Purpose
Stylus 1mm
Tool
Measuring instrument tool holder(HSK-E25)

Use when centering a workpiece.
The spring collet (C10-6-P) and the centering bar (ST6-CEB102)
are required and sold separately. Tighten nuts by hand.
JIG
■Option
CODE
●Centering bar
E25ーCEH10ー37 ●Spring collet(C10-6-P)→P.38　
■Caution
●Not usable for machining.
Equipment
Measuring
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
90
ANGLE HEAD
MAINTENANCE TOOL
■ Tool Clinic
Our engineers are here to improve your productivity by demonstrating the correct
usage and maintenance of tool holders.
M/C Tool
for Turning Mill
TOOL SET UP STATION TEST BAR CMA
General Purpose
Work table 6SD Tool washing machine CBX CHECKMATE CMB
Tool
6S DESK CLEAN BOX
JIG
P. 92 P. 94 P. 96
TOOL CAP TCA TOOL SET UP STAND Petit-Ball
Equipment
Measuring
TCB MY CUBE
TCC HFseries
Maintenance Tool
P. 97 P. 100
Wire EDM fixture
Collet stand PA TOOL HOLDER HBX ENDMILL HOUSE EMO

PALETTE STORING CABINET
JIG Tool
Information
Technical
P. 102 P. 103 P. 104
91
TOOL SET UP STATION
ANGLE HEAD
Work table
Ensure safe and comfortable

tool settings! 1
Improves the work Upper lighting
Spotlight
environment in the factory
Air gun
M/C Tool
Sorting 2
Sorting
Systematizing
Systematizing
Tool insert stand 5
Sweeping
Sweeping 5S S Safety 3
Sanitizing
Sanitizing
Self-discipline
Self-discipline
Ensure safe and comfortable tool settings. 7

for Turning Mill
4
Compact and space saving. 6
Do-it-yourself style allows you to do the assembly.
6SD
General Purpose
Tool
*This image includes the options.
White board and Punched board Shelf

JIG
1 2
Useful as a bulletin board or Two-position angle

message board, and for attaching White Punched adjustment and
board board
drawings. (freely moveable) arbitrary attaching
300
300
430
430 location.
Equipment
Measuring
255
Back side
3 Hook base panel 4 Safety stopper
Arbitrary Prevents dropping of
attachment and cutters and tools.
Maintenance Tool
recombination, and
the back side can
also be used.
100V
5 Lower lighting 6 Tabletop
Safety light cover. The tool setup stand (sold separately) can
be installed anywhere using the tabletop
Wire EDM fixture
holes. No need to put your own holes in

JIG Tool
the tabletop.
7 Lighting switch and socket 100V 8 Storage Cabinet

Freely
replaceable
Electric power tools and The see-through box allows easy
Information
notebook PC can use this organizing.

Technical
power source.
Max. 1,500W voltage,
including lighting (32W and
20W).
92
CODE
ANGLE HEAD
6SDー01
1200 ■Std. Access.
CODE Description Q'ty Description Q'ty
6SDーFBP Hook base panel 12pcs. Shelf board 1pc.
680
ーFS Short hook 3pcs. Lighting set
(Upper lighting/Lower lighting) 1 ea.
ーFL Long hook 2pcs. ※Select 50Hz or 60Hz
U-type short Power code set
ーUFS 3pcs. 1set
hook (Socket/Lighting/switch/Power code)
ーUFL U-type long hook 1pc. White board
1212
Marker pen for whiteboard

ーFSP Hook for spanner 1pc. Whiteboard eraser
Magnet pocket
1set
ーFDR Hook for driver 1pc.
M/C Tool
2012
Punched board
CN ー103 3pcs. Name seal set
Container box
ー150 6pcs. Magnets (3 pcs)
Memo book 1set
132 ㎏ 6SDーAIR Air gun set 1set Name seal set
800
Uniformity ■Caution
with stand load ●Assembly by buyer. ●Customers pay the shipping cost.
100kg ●100V electric power supply (transformer is required)

Option
for Turning Mill

100V
Side table Dust Shooter Spotlight
CODE Easy trash separation(comes with two kinds CODE
6SDーSTB 650 460 of sign seals). 6SDーSPT
■Std. Access. ※Trash cans are not provided. ※100V-4W
●Container box ( CNー103 ) ( 1pc. ) Please prepare it by yourself.
General Purpose
●Container box ( CNー150 ) ( 2pc. )
●Lid for Container Box ( 3pc. ) CODE
800
Tool
6SDーDST
Uniformity with stand load : 40kg
Tool insert stand Air gun
JIG
The most frequently used tools can be stored Attachable on either right or left side
without using a hook, and tools can be removed
CODE
from the stand easily. Comes in a movable model 6SDーAIR
(5 pockets) and a fixed model (16 pockets).
CODE Attachment q'ty
Equipment
Measuring
6SDーIS16 16 5-pocket movable 16-pocket fixed
ーIS 5 5 （6SDーIS5）
model model（6SDーIS16）
Consumables / Replacement parts

Maintenance Tool
Container box Lid for container box Dividers for storage cabinet Hook base panel
291 424(364)
(242) 490
h 119
119
70
※( ) : inner dimension ※Lockable
CODE h Capacity Q'ty CODE Q'ty CODE Required box Q'ty CODE Q'ty
Wire EDM fixture
CNー103ー3 103 ( 88) 8ℓ 3pcs. CNーFTー3 3pcs. CNーS 84ー3 CNー103 9 pieces (for 6 rooms) 6SDーFBP 2pcs.
JIG Tool
ー150ー3 150 (135) 12ℓ ーS135ー3 ー150 (Container box 3 pcs / set)
Short hook U-type long hook Long hook Hook for spanner U-type short hook Hook for driver
CODE Q'ty CODE Q'ty CODE Q'ty CODE Q'ty CODE Q'ty CODE Q'ty
6SDーFS 5pcs. 6SDーUFL 5pcs. 6SDーFL 5pcs. 6SDーFSP 1pc. 6SDーUFS 5pcs. 6SDーFDR 1pc.
Information
22 170
Technical
97 250
97 20
7
9
100
35 12
20
93
TOOL SET UP STATION
ANGLE HEAD
Tool washing machine
Wash the tooling holders, col-

1
lets, nuts, cutting tools, and small
work-pieces thoroughly to main- 2
tain their high precision.

4
Compact type with built-in sink.
M/C Tool
No plumbing required.
Safe cleaning system using water.
Comes with a washing water heater for 3
ensuring comfortable working condi-
tions even in the winter.
CBX
6
for Turning Mill
5
7
wa t er!
m
War
General Purpose
Tool
*This image includes the options.

JIG
1 Top cover 2 Outer sink cover 3 Sink

Compact built-in sink
The upper cover Prevents splashing of
of the washing unit the washing cleaner.
can be opened and
c losed with one
hand. Comes with
Equipment
Measuring
an automatic stop
f unc t i o n fo r t he
washing shower. Automatic washing space Hand washing space
Shoots cleaning fluid Heavy dirt can be washed
from 18 location nozzles. off using the hand nozzle.
Presoaking is also possible.
Maintenance Tool
4 Hand nozzle 5 Timer

Heavy dirt can be Operation can be
washed off by hand. stopped automatically
The hand washing using the clock timer.
noz zle provides (The time can be set
easy operation with arbitrarily, up to 12 min.)
free positioning and
Wire EDM fixture
removal.
JIG Tool
Attach Remove
6 Filter 7 Tank
Can be changed 65 liter tank.
easily when it be- Comes with built-in heater
comes dirty. (3Kw) standard.
The use of heated cleaning
Information
Technical
fluid (40°C) increases the

cleaning power and makes
cleaning easy even in the Tank can be removed Built-in heater
Main filter Sub-filter winter. for washing.
94
CODE
ANGLE HEAD
CBXー01
Specification ■Std. Access.
SU304 (Sink、 Tank、

Cleaning CODE Description Q'ty
Material
570
515
unit)SS 400 (Base frame)
360
CBXーHNZ Hand nozzle 1pc.

approx. 65L (Level gauge with
515
Tank
thermometer is standard accessory.) ーMFIL Main filter 2pcs.
0.3～0.51kw ( 50/60Hz )
320 335 Pump ーSFIL Sub-filter 2pcs.
(Produced by Grundfos )
280 830 3kw ーTRP Drain trap 1pc.
Heater
（with temperature control）
M/C Tool
ーGSTP Rubber drain plug 1pc.
approx. 100kg
Weight
(165kg, including cleaning fluid) ーWBSK Washing basket 1pc.
300
Voltage 3-phase 200V (Rated 15A) ーWTBL Washing table 1pc.
Sink outer cover 1set

200
1400
Hook 2pcs.
1470
1255
135～175
Bamboo brush 1pc.
Primary power code ( plug attached ) 15m

755

■Option
for Turning Mill

●Draining basket ●Cleaning fluid.
■Caution
●Be sure to use water-soluble cleaning fluid.
●Customers pay the shipping cost.
●200V electric power supply (transform-
er is required)
Option
General Purpose
Draining basket Cleaning fluid
Tool
Used for draining, air blowing, rust-proofing, etc. CODE
Can be attached to either the right or left side of the unit. CBXーEKI
●Capacity 18ℓ
CODE ●Product name: "Clean Super 285" weak alkaline cleaner
CBXーSBX
■Std. Access.
●Triple hook
JIG
MAX :40kg
150 297
(148)
Example of usage
Equipment
Measuring
310 526 1)
(305) (52 ※ (　) Inside diameter
Replacement parts
Maintenance Tool
Washing basket Hand nozzle Main filter Sub-filter
CODE Collet and small parts can be washed. CODE CODE Q'ty CODE Q'ty
CBXーWBSK CBXーHNZ CBXーMFIL 5pcs. CBXーSFIL 3pcs.
116
Wire EDM fixture
78
JIG Tool
202
Washing table Drain trap Rubber drain plug

CODE Used in a sink as an auxiliary table when CODE CODE
CBXーWTBL washing by hand. CBXーTRP CBXーGSTP
Information
Sink
Technical
95
TEST BAR CHECKMATE
ANGLE HEAD
For machine spindle maintenance
Ideal for checking machine spindle run-out

accuracy easily.
Managing spindle accuracy will maximize tool
holder performance and increase productivity.
Light-weight, hollow design makes it easy to use.
M/C Tool
Ideal for setting Z axis origin.

Reasonable price.
You can recognize the exact run-out accuracy and the highest
run-out of the spindle. Runout accuracy Length
(Actual measurement) (Actual measurement)
The actual measurement values Phase Diameter

are marked on the body. (every 45°) (Actual measurement)
for Turning Mill
It can be installed into the spindle in every phase.

Drive-key less design allows you to
HSK NT
install the test bar in every phase, making Handy CMA type
the run-out check easier than ever.
Allows you to check the
No drive key ways. dynamic accuracy thanks
to optional balance
The name ring and scale ring protect it from scratches and dents.
General Purpose
adjustment.
The taper area and straight area do not Name ring Full-fledged
Tool
touch the table surface even if they are Scale ring CMB type
placed horizontally.
Z-axis deflection and
spindle travel accuracy
can be measured.
L
Fig. 1
CODE Fig. φD φD1 L L1 L2 L3 L1 L2 L3
JIG
NT30ーCMA20ー125 1 20 32 125 45 65 15 0.7

BT / DIN / CAT.
NT40ーCMA25ー175 2 25 42 175 50 110 1.3

NT50ーCMA30ー225 30 53 225 65 145 3.5
NT30ーCMB30ー175 1 30 32 175 45 115 15 1.0 D1 D
NT40ーCMB40ー325 2 40 42 325 265 2.8

NT50ーCMB50ー325 50 53 60 250 5.7 L
Equipment
Measuring
Fig. 2
HSK32ーCMA20ー125 3 20 26 125 35 75 15 0.4 L1 L2 L3
HSK40ーCMA20ー125 32 45 65 0.5
HSK50ーCMA25ー175 25 42 175 50 110 1.0
HSK63ーCMA25ー175 1.2
HSK80ーCMA30ー225 30 53 225 65 145 2.2 D1 D
Maintenance Tool
HSK100ーCMA30ー225 3.0
HSK- A / - E
L
HSK125ーCMA30ー225 4.1 Fig. 3
L1 L2 L3
HSK32ーCMB25ー175 3 25 26 175 35 125 15 0.7
HSK40ーCMB30ー175 30 32 40 120 0.9
HSK50ーCMB40ー225 40 42 225 45 165 1.8
HSK63ーCMB40ー325 325 265 2.7
D1 D
HSK80ーCMB50ー325 50 53 60 250 4.4
Wire EDM fixture
HSK100ーCMB50ー325 5.2
Exclusive retention knob
HSK125ーCMB50ー325 6.3
JIG Tool
HSK63FーCMA25ー175 3 25 42 175 50 110 15 1.2 CODE Shank

HSK80FーCMA30ー225 30 53 225 65 145 2.3 Pー576 CAT.40
HSK- F
ー575 CAT.50
HSK63FーCMB40ー325 40 42 325 45 265 2.7 ー578 DIN40
HSK80FーCMB50ー325 50 53 60 250 4.5 ー577 DIN50
■Std. Access. ■Note
● Accuracy inspection sheet ● NT type is available for BT/CAT. and DIN spindle by changing the retention knob.
Information
● HSK type is available for both HSK-A and HSK-E spindles. ●HSK-F type is available only for HSK-F spindle.
Technical
■Option
●A special design retention knob is required for CAT./DIN spindle. A market standard retention knob
● Coolant duct(HSK-A) ●Retention knob(BT)
for ANSI/DIN/ISO is not available. Contact us for the details.
● Special retention knob(CAT. / DIN)
● Balance adjustment (only for CMA type) less than G2.5 /30000min -1 ■Caution
*Please order by adding "BL" to the end of the code. ● Use a market standard retention knob for the BT spindle.
(Ex. : HSK63-CMA25-175 BL ) ● NT30 type can be installed into a spindle at 0°and 180°.
● A.T.C is not available. (except for NT30)
96
TOOL CAP
ANGLE HEAD
Cutting tool cover
See-through tool cover.

You can take care of your tools safely and simply.
Prevent cutting tools from coming into contact TCC
with each other and being damaged or chipped. Attached by de-
forming its cap.
Prevent getting injured when taking the tool holder
M/C Tool
in and out or when carrying.
Easy to put on and take off.
Applicable for various shapes
TCB
Attaches directly
or brands. to the tip of the
cutting tool.

for Turning Mill
TCA
Attaches to the tip
of a tool holder.
General Purpose
Tool
The tool is visible Prevents chipping and damage to cutting tools
The cutting tools can be stored with the caps on. By placing the Storing cutters with caps will prevent them from hitting each other
cap on the tip of the tool holder, the cutter doesn't receive any and being chipped. This will minimize grinding costs for recondition-
JIG
stress, alleviating any worries over the cutters breaking. ing and lead to reduced operating costs.
Equipment
Measuring
Maintenance Tool
Will not slip off! It can be used with every configuration

Can be put on with one touch, and won't fall off when turned and brand.
upside down.
Wire EDM fixture
JIG Tool
Conventional
Information
Technical
97
TCA type
ANGLE HEAD
H
h (MAX) d (MAX) h1 h2
C D
Code system
2030 50
TCA (Min.～MAX.)
ー (pc)
TCA2022 TCA2830 TCA3436 TCA4043 TCA4650 D dimension Q’ty

M/C Tool
CODE φD φC φd H h h1 h2 Type Qʼty List price Note
TCA2022 20～22 29 8 100 70 30 70 DTA7/DTB7 10 pcs. ¥　3,000

TCA2830 28～30 34 14 130 90 40 90 DTA12/DTB12/DTE7 50 pcs. ¥ 10,000 Please order by
adding Q'ty to the
TCA3436 34～36 41 135 45 CTA10/CTH10 100 pcs. ¥ 15,000
end of the code.
TCA4043 40～43 47 20 152 105 47 105 DTE12 300 pcs. ¥ 40,000 Ex. TCA2022ー10
TCA4650 46～50 54 167 120 120 CTA20/CTH20 500 pcs. ¥ 60,000
for Turning Mill
Cap dispenser
Tool caps can be easily removed from the dispenser. sy
ea
Dispenser exclusively for storing TCA-type tool caps. Made of to u c h
One - l.
transparent acrylic resin, allowing you to confirm which caps are va
rem o
still in the dispenser.
General Purpose
Take in
Tool
Take out
Cap dispenser Cap dispenser

CODE Type Qʼty List price
CAP2022 TCA2022 31ヶ ¥6,000
JIG
CAP2830 TCA2830 20ヶ Dedicated bracket

CAP3436 TCA3436
CAP4043 TCA4043 22ヶ
CAP4650 TCA4650
Dedicated bracket
Equipment
Measuring
CODE List price Five cap servers can be attached.

SRVー01 ¥10,000 Attach the bracket to a wall using bolts.
TCB type
Maintenance Tool
H
h1 h2
C D
Code system
Wire EDM fixture
2042 300
TCB ー (pc)
JIG Tool
(Min.～MAX.)
TCB0820 TCB2042 D dimension Q'ty
Price list
CODE( Master holder) φD φC H h1 h2 Qʼty List price Note
TCB0820 8〜20 33 82 52 30 10 pcs. ¥ 4,000

Information
Please order by adding

Technical
TCB2042 20～42 54 102 62 40 50 pcs. ¥ 13,000

Q'ty to the end of the
■Note
100 pcs. ¥ 20,000
code.
●The bristles of the brush may become deformed during use. If such deformation 300 pcs. ¥ 53,000
Ex. TCB0820 ー 10
occurs, remove the brush and immerse it in hot water (60°C to 80°C). 500 pcs. ¥ 80,000
This should restore the deformed bristles to their original state.
98
TCC type
ANGLE HEAD
H
D h1
TCC0607 TCC0709 TCC0911 TCC1113 TCC1418
Code 2228 100

system
TCC (Min.～MAX.)
ー (pc)
D dimension Q’ty
M/C Tool
TCC1822 TCC2228 TCC2836 TCC3646 TCC4760
CODE φD h1 H Q'ty List price Variety set

TCD03ー50 3 ー 25 50pcs. ¥ 1,400 CODE Qʼty List price
TCD04ー50 4 ー 32 50pcs. ¥ 1,500
TCC0607ー 50 5.4～ 6.7 35 40 50pcs. ¥ 1,600 2 pieces per cutting tool cover
　　　　ー100 TCCーF size for TCC0607 to 4760 ¥2,700

100 pcs. ¥ 2,400
(Total of 20 pieces / set)
for Turning Mill

　　　　ー500 500 pcs. ¥ 9,500
TCC0709ー 50 6.8～ 8.9 35 40 50 pcs. ¥ 2,100
　　　　ー100 100pcs. ¥ 3,200 Usage
　　　　ー500 500pcs. ¥ 12,500
1.Hold the mouth of the tool cap vertically, and then press it
TCC0911ー 50 8.9～10.9 65 70 50pcs. ¥ 2,650
so that its oval shape becomes round.
　　　　ー100 100pcs. ¥ 4,000
　　　　ー500 2.Once the mouth of the tool cap becomes round, push it
General Purpose
500pcs. ¥ 16,000
into the cutting tool or tool holder.
TCC1113ー 50 10.9～13.4 65 70 50 pcs. ¥ 3,150
Tool
　　　　ー100 100 pcs. ¥ 4,800
　　　　ー500 500 pcs. ¥ 19,000
TCC1418ー 25 13.8～17.8 100 110 25pcs. ¥ 2,400
　　　　ー 50 50 pcs. ¥ 3,200
1
　　　　ー250 250 pcs. ¥ 10,750
2
TCC1822ー 25 17.8～22.4 100 110 25pcs. ¥ 3,000
　　　　ー 50 50 pcs. ¥ 4,000
JIG
　　　　ー250 250 pcs. ¥ 13,500
TCC2228ー 25 22.3～28 135 150 25pcs. ¥ 3,750
　　　　ー 50 50pcs. ¥ 5,000
　　　　ー250 250pcs. ¥ 19,000
TCC2836ー 10 28 ～36 130 150 10pcs. ¥ 2,000
Equipment
Measuring
　　　　ー 20 20pcs. ¥ 2,700
　　　　ー 50 50pcs. ¥ 5,100
　　　　ー200 200pcs. ¥ 18,000
TCC3646ー 10 36.2～47 165 190 10pcs. ¥ 2,600
　　　　ー 20 20pcs. ¥ 3,400
Maintenance Tool
　　　　ー 50 50pcs. ¥ 6,500
　　　　ー200 200pcs. ¥ 22,800
TCC4760ー 10 46 ～60 160 190 10pcs. ¥ 3,300
　　　　ー 20 20pcs. ¥ 4,400
　　　　ー 50 50pcs. ¥ 8,400
　　　　ー200 200pcs. ¥ 29,600
■Note
Wire EDM fixture
●The cover can be cut to the required length.

JIG Tool
Information
Technical
99
Tool set up stand
ANGLE HEAD
Tool tightening stand
The setup time can be shortened.

Not only can you mount cutting tools simply and quickly without
using other tools, but also clamping collets and retention knobs!
M/C Tool
Vise clamping type

et
ly s r
Freecally o y
i ll
BT40/DIN40 / CAT.40 ver t izonta BT50/DIN50 / CAT.50 BT30 / BT40 / BT50
ho r le
HSK�A40 / A50 / A63 / A100
rdab
E32 / E40 / E50 / F63 Af fo
HSK-A100 / T100
for Turning Mill
General Purpose
Tool
Usable either vertically or horizontally (PETIT BALL, MYCUBE)

JIG
The tool can be placed either vertically or horizontally, whatever angle is most convenient for you.
Equipment
Measuring
Maintenance Tool
Nut tightening Clamping DETa-1 Collet( DTB ) Retention knob tightening Clamping SlIMLINE collet
Multi-purpose usage Accuracy assured

By using adaptors, various tool holder shank types, including The taper is the most crucial part for maintaining the accuracy of
straight arbor DTB holders, can be used. a tool holder. A special resin is applied to the taper contact area
Wire EDM fixture
to prevent scratches on the tool holder.

JIG Tool
Information
Technical
100
Petit Ball
ANGLE HEAD
CODE Shank type Name plate
A specially finished name plate
Petit Ball40 BT40/DIN40/CAT.40 6.1 is provided, on which your com-
190
pany name is inscribed.
■Option Up to 12 characters (upper-case
●Adapter Pot Hanger
alphabetic characters, numeric
■Std. Access.
characters, and/or hyphens).
●Name plate
■Caution
●No mounting bolts are provided.
135 Adapter（ PETIT BALL)
Use two M8 bolts for mounting. 25.5
12 Adapter for Adapter for pot
M/C Tool
155 pot Adapter for CODE Shank type
Name plate
hanger AP40ーT30V BT30
132
Adapter for hanger
CODE Shank type
10 10 80
AP40ーT30H BT30
ーS25H ST25TーDTB7
ーS32H ST32TーDTB7 , 12

for Turning Mill
MY CUBE
Name plate
CODE Shank type
A specially finished name plate
MY CUBE 50 BT50/DIN50/CAT.50 9.7 is provided, on which your com-
General Purpose
pany name is inscribed.
MY CUBE100 HSKーA100, T100 9.6 Up to 12 characters (upper-case
Tool
■Option
alphabetic characters, numeric
250 characters, and/or hyphens).
●Adapter　
Pot Hanger
■Std. Access.
●Name plate
■Caution Adapter（ MY CUBE50 )
●No mounting bolts are provided.
150 Adapter
125
Use two M8 bolts for mounting.
for pot
Adapter for pot
12
CODE Shank type
JIG
Adapter
Name plate AP50ーT30V BT30
for hanger
ーT40V BT40/DIN40/CAT.40
ーA63V HSKーA63, T63
13 185 52
ーF63V HSKーF63
110 14
44 Adapter for hanger
Equipment
Measuring
29 CODE Shank type
AP50ーT30H BT30
110 140 φ14
ーT40H BT40
ーA63H HSKーA63, T63
ーF63H HSKーF63
ーS25H ST25TーDTB7 Maintenance Tool
ーS32H ST32TーDTB7, 12
HF series
Fig. 1 Fig. 2 Fig. 3
CODE Fig. Shank type H W t
Clamping Lever
HFーBT30 1 BT30 77 70 30 0.8

ーBT40 BT40 90 90 37 1.2
Wire EDM fixture
ーBT50 2 BT50 ーーー 2.2

JIG Tool
HFーA40 1 HSKーA40, T40 72 60 30 0.8

H
120 H
12
ーA50 ーA50, T50 77 70 37 1.0
ーA63 ーA63, T63 87 90 1.2 45 11 45 11
W 125 W
ーA100 2 ーA100, T100 ーーー 2.1
HFーE32 3 HSKー E32 98 64 ー 1.0
Information
14 47
Technical
t 26
ーE40 ー E40 100 70 1.1 R7
22
ーE50 ー E50 106 80 1.3
ーF63 ー F63 120 90 1.6
101
ANGLE HEAD
Collet stand
This pallet neatly houses collets. PAーR

Uniquely designed by an industrial designer.
Protects the collets from damage to
maintain their accuracy.
M/C Tool
Both top side and back side are usable.

Affixing labels allows easy storage by size.
Has standard outer dimensions ensuring
applicability to various types of drawers
and shelves.
Applicable regardless of manufacturer.

PAーB Neatly arranged by size
for Turning Mill
General Purpose
Tool
A stand for the SLIMLINE 2-piece type

collets is also available.
PAーR PAーB
JIG
Equipment
Measuring
38 38
15
15
0
200
200
Maintenance Tool
Storage side of Spring collet(C10) Storage side of Spring collet(C20)

16.8 27
×17pcs.
×31pcs. 4° 3°
16 16
Wire EDM fixture
11 90° 11 90°
JIG Tool
×31pcs. ×17pcs.
12.2 17.2
Storage side of Deta-1 collet(D7)

CODE Qʼty List price Storage side of Deta-1 collet(D12)
PAーRー 1 1pcs. ¥　1,800 CODE Qʼty List price

Information
Technical
ー 5 5pcs. ¥　6,000
PAーBー 1 1pcs. ¥　1,800
ー10 10pcs. ¥　9,000
ー 5 5pcs. ¥　6,000
ー10 10pcs. ¥　9,000
102
TOOL HOLDER STORING CABINET
ANGLE HEAD
Compact Storage Box with Anti-
Rust Treatment for tool holders.
Orderly storing with name plate!
M/C Tool
t
ns paren
Tra !
!
Name Plate
case
Freely arrangeable HBX
Can be used with a variety of holders

by changing the pins and combining as
for Turning Mill

you wish. Three types of container boxes.
Max holder length

222
127
80
Horizontal type Vertical type
General Purpose
CNー103 CNー150 CNー245
Tool
Standard Set
Container
CODE max. Qʼty Pin Shank type
box Qʼty
HBXーA40 24 CNー 150 HBXーPNE40 18pcs. HSKーA40
ーA50 15 ー 245 ーPNE50 15pcs. ーA50
JIG
ーE25 40 ー 150 ー PNE25 32pcs. ーE25
■Contents of set
ーE32 ーPNE32 ーE32 ●Base plate ●Container box ●Pin
ーE40 24 ーPNE40 18pcs. ーE40 ■Option
ーE50 15 ー 245 ーPNE50 15pcs. ーE50 ●Rail ●Name plate
●Lid for container box ●Eyenut
ーF63 10 ーF63
■Note
ー15T 40 ー 150 ーPN15T 16pcs. 15T(BROTHER)
Equipment
Measuring
●Knock-down type. A wrench (5mm) is required.
ー20T ーPN20T RS20 / 20T (SUGINO)
Base plate Container box Pin

A multi-hole base plate is employed. H CODE Qʼty Size
Supports a variety of holder specifi- CODE Shank type HBXーPNE25 10 pcs. φ13.5 × H20
Outside Inside
cations using pins that can be freely diameter diameter ーPNE32 φ16.5 × H25
Maintenance Tool
changed and relocated.
CNー103 103 88 ーーPNE40 5 pcs. φ20.5 × H29
CODE ー150 150 135 E25, 32, 40/15T/20T ーPNE50 φ25.5 × H36
HBXーBP01 ー245 245 230 A50, E50, F63 ーPN15T φ26.5 × H54
424 ーPN20T φ30.5 × H62
291 (364 ) ( ) : Inside diameter Pin
(242 ) ■Std. Access.
●Mounting bolt（M6）
238
Wire EDM fixture
H
360
JIG Tool
Eyenut Rail (for name plate) Name plate Lid for container box
CODE Qʼty CODE Qʼty L Note CODE Qʼty CODE
HBXーEN M 6 2pcs. HBXーR210 6pcs. 210 Vertical type HBXーNP01 40 pcs. CNーFT
■Std. Access. ーR330 4pcs. 330 Horizontal type Useful for organizing tools.
●Mounting bolt （M6） Attaches easily to the rail.
■Std. Access.
Information
Technical
●Mounting bolt (M5)
33 Required for attaching

name plate. 58
58 Freely cut to required
Rail
overall length
103
ENDMILL HOUSE
ANGLE HEAD
Cutter protection box
Are you having trouble storing your cutting tools ?

ng s
took
Dro
ppi
y c u tting rage
o
?
ing Man ssy st
n Chipp me
lisio
Col
Cutting tool expenses increase due to cutting edge chipping. The required cutting tool cannot be found easily.
M/C Tool
Save cutting tool expenses and time with Cutter shank dia.
the optimum working environment. φ3~25
Compact A4 size
Cutting tool life is extended because
the cutting edge is not dulled from
striking other cutters. Free combination of sizes.
You can find the required cutting
tool immediately.
for Turning Mill
General Purpose
Tool
Value set
This is a convenient value set that can be immediately used and handles tool shank diameters of 3 mm to 12 mm. (Stores 156 cutting tools)
Stand Base TOOL CAP TOOL CAP storage box CODE

Cutter dia Q'ty Q'ty Stand
JIG
Cutter dia Q'ty
φ 3 1 1 φStand
3 50 Q'ty
EMOーSETー01
φ 4 2 φ 4 50 1
φ 6 3 φ 6 50
φ 8 2 φ 8 50Base
φ 10 2 φ 10 50 φ3:13 pcs. φ4 :26 pcs. φ6 :39 pcs.
φ 12 2 Base φ 12 50 φ8:26 pcs. φ10 :26 pcs. φ12 :26 pcs.
Equipment
Measuring
Stand Base
Parts for storing and securing cutting tools. It is possible to identify Container for holding the stands.
the cutting tool size by color, and the cutting tool you need can be Stands can be arranged by changing the combination of stands freely.
found at a glance. Use this stand inserting it into the base.
CODE Q'ty
298
EMOーBASー1 1 ize
A4 s
Maintenance Tool
ー3 3
W
■ Note 57
φd ●12 rows for the stands of 3mm
to 12mm diameter or 6 rows for

CODE φd Q'ty Color max. Qʼty W the stands of 16mm to 25mm
EMOーSTD 3ー2 3 2 diameter. 185
Black 300
ー5 5 The left-right orientation of the
●
ーSTD 4ー2 4 2 stands can be set.

Brown
ー5 5
Wire EDM fixture
ーSTD 6ー2 6 2
Gray
ー5 5 13 pcs. /cutting 15 mm Example of stand arrangment
JIG Tool
(φd )
ーSTD 8ー2 8 2 tools/stand （1W）
Yellow …　3
ー5 5
1W …　4
ーSTD10ー2 10 2
Orange …　6
ー5 5
…　8
ーSTD12ー2 12 2 … 10
Black
ー5 5 12W … 12
ーSTD16ー2 16 2
Blue … 16
Information
ー5 5 2W
Technical
7 pcs. / cutting
ーSTD20ー2 20 2 30 mm
Orange tools/stand … 20
ー5 5 （2W）
ーSTD25ー2 25 2 … 25
Gray
ー5 5
φd
104
MIDDLE VISE
ANGLE HEAD
Work Holding Fixtures for W-EDM
A work-piece fixture jig with high-accuracy

positioning and short setup time.
Suitable for small work-pieces.
High flexibility in choosing installation place Height adjusting bolt
±0.3 mm
compact design.
M/C Tool
±0.3mm
Leveling bolts
After the work-piece is attached, horizontal Rotating bolts
and parallel adjustments are possible due to the
independent fine adjustment functionality.
Two sliders makes it easy use to use.
0.3 mm
Compact design

±
This product does not use a table corner,
for Turning Mill

allowing it to be installed in any place.
Multiple pieces may be installed.
Height adjusting mechanism
General Purpose
1mm
The clearance between the zero level of the

table and the level of the workpiece can be
Tool
set to 0 or 1 mm. The Two-slider system allows you to
set it up anywhere.
Workpiece
Level of workpiece Slider
Mounting plate
Zero level of table Table
0～1mm
JIG
Standard set
CODE
MDVー501
Equipment
Measuring
Description
1. A complete set of main body
(including 2 sliders and 1 jaw)
2. Allen wrench (1 each: 2.5, 4, and 6 mm)
3. 10 mm spanner (1) Maintenance Tool
4. M8 mounting bolts and washers (25 ea.)
Specification Height 230

Wire EDM fixture
adjusting 150
This unit uses stainless steel that is highly bolt 29
100 Leveling bolt
JIG Tool
resistant to corrosion and wear. Matching mark

Mounting bolt Swing bolt
Maximum dimensions of work-piece 130×100
Maximum weight of work-piece (㎏) 3
100
56
Weight of main body (㎏) 5 Slider lock bolt

2.6
Material SUS420J2
170
Hardness 50HRC
11
Workpiece
2
Information
Technical
Leveling bolt lock bolt

70
Jaw Slider
Locating rail Level of Table
workpiece zero line
40 MIN.0〜 MAX.130 20
105
Optional accessories
ANGLE HEAD
Name Model no. Dimensions Max. work-piece size
28 40
76
~170
Extension Jaw ~100
170
JAEー501
For large work-pieces.
94
171818
70
M5 tap
M/C Tool
8 2
2.6 20 25 MIN.0~MAX.170
10
93
70
16
69
2 15~60
L Slider
45
SRLー501 10 2 10
15~40
For small work-pieces 20 25 6~30

60
for Turning Mill
10
28
10
2.6
110
General Purpose
φ20~70
83
V Slider
60
42
158
Tool
SRVー501 2 90°
8~30
For round work-pieces 55
bolt
bolt 16 2.6
120 28
35
JIG
~60
Sandwich Slider
15
58
35
~60
SRSー501
For small and
thin work-pieces 6~20
2
Equipment
Measuring
10 2.6
28
Clamp on Slider
Maintenance Tool
~130
The work-piece M5 tap
~130
93
can be clamped to SRCー501

70
the jaw using the

55
28
clamper. 18~35
The extension plate 2.6 17 8
18
can also be used. 28 40

Extension plate
Wire EDM fixture
JIG Tool
Information
Technical
106
Wire Cut Unit
ANGLE HEAD
Work Holding Fixtures for W-EDM
A work-piece off-line set-up system

with high-accuracy positioning and
short setup time. Leveling bolts
1mm
1mm
A work-piece having a datum surface
M/C Tool
can be accurately attached by merely
affixing it to the wire cut unit body.
You can clamp a work-piece quickly.
After the work-piece is attached,
horizontal and parallel adjustments
1mm
are possible due to the independent

fine adjustment functionality.
for Turning Mill

Leveling bolts
General Purpose
Wire Cut Unit set
Tool
WCU - A set
JIG
WCU - B set
Equipment
Measuring

Maintenance Tool
WCU - C set
Wire EDM fixture
JIG Tool
*The right side is the state where set contents are stored in the case.
Extension Plate (optional accessories) Case is not included.
PTE-001 95 PTE-002 140

Information
Technical
80 120
40 80
55
100
107
Examples of use
ANGLE HEAD
Leveling bolt
(3 locations) Base plate
Clamper
Datum face A
Mounting bolt,
Disc spring Locate rail
Extension plate Datum face B
Small round work-piece – Side

M/C Tool
Large work-piece - Clamp on Square work-piece - Side Clamp

Clamp with the extension plate
Extension plate
Set Contents
for Turning Mill
Extension plate
A set B set C set
Name Model No. ( Option )
WCUーA WCUーB WCUーC PTEー001 PTEー002
Base plate ー 1 pc. 1 pc. 1 pc. ーー

PTEー001
General Purpose
Extension plate 1 pc. 1 pc. 2 pcs. 1 pc. ー

(only plate) ー002 ー 1 pc. 2 pcs. ー 1 pc.
Tool
CLPー101 4 pcs. 6 pcs. 10 pcs. 2 pcs. 2 pcs.

Clamper ー102 4 pcs. 6 pcs. 10 pcs. 2 pcs. 2 pcs.
ー201 1 pc. 2 pcs. 3 pcs. ー 1 pc.
Grip GRPー002 2 pcs. 2 pcs. 2 pcs. ーー
AJBーM6ーL
Adjusting bolt 1 ea. 2 ea. 3 ea. ー 1 ea.
( L= 30, 50, 80 )
JIG
STBーM6ーL
Stud bolt 1 ea. 2 ea. 3 ea. ー 1 ea.
( L= 40, 50, 70, 90 )
L=16, L=16, L=16, L=16, L=16,
20, 20, 20, 20, 20,
Cap bolt 25, 25, 25, 25, 25,
ー 30, 30, 30, 30, 30,
M6 × L
Equipment
35 4 ea. 35 6 ea. 35 10 ea. 35 2 ea. 35,

Measuring
L=40, L=40, L=40, 40,

50 2 ea. 50 4 ea. 50 6 ea. 50 2 ea.
Set screw (Kultopp)
M6×30
ー 1 ea. 2 ea. 3 ea. ー 1 pc.
Nut, Washer M6 ー 2 ea. 4 ea. 6 ea. ー 2 ea.

Maintenance Tool
Hexagonal wrench,
spanner ー 1 set 1 set 1 set ーー
240 Mounting bolt

Specification 30 45 50 55 3-M8
Wire EDM fixture
25
This unit uses stainless steel that is 44 80
13 55
highly resistant to corrosion and wear. 25 25 25 25 25 13
JIG Tool
15
115
30
Max. work-piece dimensions 160mm(6.30”)×160mm(6.30”) 240 10-M6tap
5
72
25 10
Max. work-piece weight 15kgs(33lbs) 25
25
160 25
Main body weight 4.3kgs(9.5lbs) 65 25
25
25
Material SUS420J2(Stainless steel)
5-M6 tap
Hardness 50HRC 13 5
Information
44
Technical
25 55
Datum surface squareness 160
80
5μm(.0002”)/100mm(3.94”) 13 15 58 25 25 5-M6 tap
20 Work-piece bottom surface = Zero level of table
Locate rail
108
PARTS
ANGLE HEAD
Spanner・ Wrench
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
L B L
B B
R L L1
L L
B
CODE Fig. L R B L1 Holder type

DWー2.5ー110 5 110 ー 2.5 ー DTB 3
M/C Tool
F ー 22 1 110 22 ーー DTA 3
ー 38 148.5 19 DTA 7
ー 45 225 22.5 DTA12
FCー 32 1 120 16 ーー CTH10 ( A40, E32, E40 ) , HUD, HUA10, AHU10, HUT4
ー 36 208 18 CTA10, CTH10
ー 50 281 25 CTA20, CTH20
ー 55 284 27.5 CTH25 ( A40 )
ー 62 312 31 CTA25, CTH25
ー 74 364 37 CTA32, CTH32

ー 90 45 CTA40
for Turning Mill

F F ー 50 1 165 22.5 ーー FMA25.4 ( ST32B )
ー 60 195 26 FMA25.4 ( ST42B ) , FMA31.75
FMー 72 1 204 36 ーー ART32 ( BT40, A50M, A63, NT40, H50 )
ー 82 234 41 ART32 ( BT50, A100, NT50 )
ー 97 239 48.5 ART42 ( BT50, A100, NT50 )
RCー 26 4 240 ー 24 ー CTS10 ( E32 )
TWー 4 2 77 ー 4 ー DTB 7 ( E32 )
ー 5 153 5 DTB 7
General Purpose
ー 6 173 6 DTB12
W ー135 3 132.5 ー 5 110 SLK12 (SLIMLINE 2 PIECE TYPE )
Tool
ー135 DR DTB 7 ( F63M ) , DTB12 ( E40, E50, F63M ) , DTE7, DTE12
ー206 200 6 30 SLZ25
ー308 300 8 SLZ32, SLZ42
Adjustable torque wrench
JIG
R
Spanner for Adjustable Holder type

R
torque wrench torque wrench Recommended tightening torque
F ー38AW AWー1 19 DTA 7 D7-1.5 : 　　　　 2kgf・m
D7-2.0～7.0 :　　　 4kgf・m
Equipment
Measuring
ー45AW 22.5 DTA12 D12 ( All sizes ) : 7kgf・m
FCー36AW AWー1 18 CTA10 / CTH10 C10-2.6～5.0 :　　　 4kgf・m
C10-5.2～5.8 :　　 5kgf・m
C10-6～10 :　　　 6kgf・m
ー50AW AWー2 25 CTA20 / CTH20 C20 ( All sizes ) : 12kgf・m
Maintenance Tool
Nozzle
±30°
D
G L W
Wire EDM fixture
CODE L G W φD Holder type Qʼty

JIG Tool
NOZーM4ー12 BT40ーART 12pcs.

6.3 M4 4.5 1.2 A63 ーART
ー60 ーSLK 60pcs.
ーM6ー12 BT50 ーART 12pcs.
8.5 M6 7 1.8 A100ーART
ー60 ーSLZ 60pcs.
■Std. Access.
Information
Technical
● Wrench for attachment
■Caution
● Four nozzles are necessary for one tool holder.
109
Nut (For collet holder) SUKIMA nut (For collet holder)
ANGLE HEAD
CODE Fig. φC H Holder type Holder

CODE φC H φd φd1 S type
NUAーCTA10 1 36 18 CTA10, AHB10 NUBーCTH10ー 3.6 36 23 3 3.6 3.1 CTH10
ーCTA20 50 25 CTA20, AHA20, d ( Cutter ー 4.5 4 4.5 3.3
Fig. 1
AHU20 shank ) ー 5.5 5 5.5 3.7
ーCTA25 62 28.5 CTA25, AHA25 ー 6.4 6 6.4 3.9
C C d1 ー 8.4 8 8.4 4.6
ーCTA32 74 32 CTA32
ー10.3 10 10.3 4.8
H ーCTA40 90 36 CTA40 H
ーCTH20ー 6.4 50 30 6 6.4 3.9 CTH20
Fig. 2 ーCTH10 2 36 18 CTH10 ー 8.4 8 8.4 4.6
Smm2
ーCTH20 50 25 CTH20 ー10.3 10 10.3 4.8
(Clearance
C ーCTH25 62 28.5 CTH25 area) ー12.3 12 12.3
M/C Tool
ー16.2 16 16.2 5 .1
ーCTH25ー55 55 CTH25 ( A40 )
H ー20.2 20 20.2 5.7
ーCTH32 74 32 CTH32
ーCTH25ー20.2 62 34.5 CTH25
Fig. 3 ーCTH10ー32 32 18 CTH10 ( A40, E32, E40 ) , ー25.2 25 25.2 5.9
AHU10 ーCTH32ー25.2 74 38 CTH32
C
ーCTS10 3 26 21 CTS10 ー32.1 32 32.1 6.0
H
Adjust screw
for Turning Mill
Fig. 1 Fig. 2 CODE Fig. L φD φd L1 J K G Holder type
K G 1 22 10 ー 8 1.5 3 M14×1.5 CTA10 (※1)

G AJCーM14 ST25T －CTA20
J
SE30M －CTA20
d 5 D
D 27 20 13 5 4 M24×1.5 CTA20 (※2)
L1 BT40 －CTA25－ 75
ーM24 BT40 －CTA32－105
L1 L
L NT40U －CTA25
ーM28 25 M28×1.5 CTA25 (※3)
General Purpose
24 15 8 M18×1.5 BT30 －CTA20, ST32T－CTA20
Use this to adjust the cutter projection length. ーM18 H40 －CTA20, CTA25
MT4 －CTA20, CTA25
Tool
※ 1 MT2 is excluded.
※2 BT30 , H40 , SE30M, ST25T , ST32T and MT4 are excluded. 2 43 23 BT50 －CTA32, CTA40
※ 3 BT40−CTA25−75 , NT40U , H40 and MT4 are excluded. ーM18L H50 －CTA32, CTA40
BT50 －SLZ25, SLZ32, SLZ42
AJNーM18L 2 38 23 10 8 ーー M18×1.5 BT40 －ART32
ーM18 63 BT50 －ART32, ART42
Coolant duct
Coolant duct（ Fixed ）
JIG

W G O-ring W
G O-ring W
G
O-ring
C D C D
D
L L L
Equipment
Measuring
■Note
CODE Fig. φC φD L G W Shank type ● Comes as a standard feature with our holders. However, for the CD50-03 and
CD40 ー01 1 8 4 29.5 M12×1 4 A40, T40 the CD63-03, CD50-04 and CD63-04 come as options, respectively.
ー03 3 35.5 A40ーCTH10ー75
ー04 36.5 A40ーCTH25ー95
CD50 ー01 1 10 5 33 M16×1 5 A50, T50
ー03 3 39 A50ーCTH25ー105
ー04 59
Maintenance Tool
CD63 ー01 1 12 6 36.5 M18×1 6 A63, T63

ー02 2 A63ーCTH10ー75
ー03 3 39.5 5 A63ーCTH20ー90
ー04 60.5 A63ーCTH25ー105
CD100ー01 1 16 8 44 M24×1.5 8 A100, T100
ー02 2 10.3 A100ーCTH25ー135
Coolant duct (Adjustable) Dummy duct

Wire EDM fixture
Fig. 1 Fig. 2 W L Evacuation(2 places)

L O-ring L 5
JIG Tool
C C C
D G D
G G
CODE Fig. φC L φD G Replaceable coolant duct CODE φC L G W Replaceable coolant duct

CD63 ー01F 1 12 36.5 7 M18×1 CD 63-01 CD40 ーA1 8 29.5 M12×1 4 CD 40-01
ー03F 2 45.5 6.5 CD 63-03 CD50 ーA1 10 33 M16×1 5 CD 50-01
Information
Technical
CD100ー01F 1 16 44 10 M24×1.5 CD100-01

CD63 ーA1 12 36.5 M18×1 6 CD 63-01
■Note CD100ーA1 16 44 M24×1.5 8 CD100-01
● For some machines, the use of a coolant duct (Adjustable) is recommended. The
existing coolant duct is replaced with an adjustable one at your request only when you
have placed an order for the holder.
● If the replacement of the coolant duct is needed after the purchase, use the wrench
CD63-01F-RNT.
110
PARTS LIST
ANGLE HEAD
HFD7 / HFT4 ( BT30 / 40 / 50, A63 , DN40 / 50, CT40 / 50) 27 Positioning pin
BT30 / 40, A63
1 2 8 9 19
CODE CODE Fig. Pin type φD L
Washer
( Master holder ) Orienta- for inter- Inter- HPー50S 1 Straight pin 18 50
Shank mediate mediate Head
tion Ring bearing ー50W Expansion pin
B bearing
ー50T 3 Taper pin 20
BT30 ーHFD7ー122 BT30ー FSAー7S ORRー30 ーー FBAー7S
ーHFT4ー122 DN40, CT40
ーHFD7ー182 BT30ー FSAー7L FZー7 6804ZZ FBAー7L HPー62S 1 Straight pin 18 62
ーHFT4ー182 ー62W Expansion pin
BT40 ーHFD7ー120 BT40ーFSAー7S ORRー40 ーー FBAー7S ー50TL 3 Taper pin 20 65
M/C Tool
ーHFT4ー120
1 Shank BT50, DN50, CT50
ーHFD7ー180 BT40ーFSAー7L FZー7 6804ZZ FBAー7L
ーHFT4ー180 HPー62S 1 Straight pin 18 62
BT50 ーHFD7ー195 ー62Sー20 2 20
BT50ーFSAー7L ORRー40
ーHFT4ー195 ー62W 1 Expansion pin 18
ーHFD7ー255 ー62Wー20 2 20
BT50ーFSAー7XL FBAー7XL
ーHFT4ー255 ー62T 3 Taper pin 28
A63 ーHFD7ー183 A63ーFSAー7L ORRー40 FZー7 6804ZZ FBAー7L Fig. 1 Fig. 2 Fig. 3
ーHFT4ー183
ーHFD7ー243 D D D
A63ーFSAー7XL FBAー7XL 10°
ーHFT4ー243

DN40AーHFD7ー135 2 Orientation
ーー
for Turning Mill

DN40AーFSAー7S ORRー40 FBAー7S
ーHFT4ー135 ring L L
L
ーHFD7ー195 DN40AーFSAー7L FZー7 6804ZZ FBAー7L
ーHFT4ー195
ɸ18 ɸ18
DN50AーHFD7ー195 DN50AーFSAー7L 3 Angular bearing
ーHFT4ー195 CODE 7005ADB
ーHFD7ー255 DN50AーFSAー7XL FBAー7XL
28 Bracket
ーHFT4ー255 BT30 / 40, A63
CT40 ーHFD7ー135 CT40ーFSAー7S ORRー40 ーー FBAー7S S
CODE S
ーHFT4ー135
General Purpose
ーHFD7ー195 FKAー60 60
CT40ーFSAー7L FZー7 6804ZZ FBAー7L 4 Housing ー65 65
ーHFT4ー195
Tool
CODE FHA-S
CT50 ーHFD7ー195 CT50ーFSAー7L DN40, CT40
ーHFT4ー195 FKAー60-L 60
ーHFD7ー255 CT50ーFSAー7XL FBAー7XL ー65-L 65
ーHFT4ー255
5 Dovetail nut
■Std. Access. CODE FDN-M6 BT50, DN50, CT50
● Fixing spanner ( KS−23 ) ● Hexagonal wrench set ( W−1550S ) FKAー 80 80
● Single-ended wrench 13mm( SN-13 )
ー 85 85
※ 3 , 9 , 11 , 14 and 22 are able to use standard commercial items. 6 Collar A ー110 110
CODE FHC-S
JIG
The tools for assembly
Wrench (for shank) 3
To be used for tightening 11 . 27 Positioning pin
CODE 10 Collar F
FC-32 FHC-7F
Equipment
CODE
Measuring
Wrench (for head) 28 Bracket
To be used for tightening 12 and 13 . 11 Nut and washer
for bearing
CODE CODE AN04/AW04
TSHーHF7
8 Washer for
intermediate Maintenance Tool
bearing B
9 Intermediate
bearing
7 Drive gear
HFD7 23 Angle shaft ( for drilling ) CODE GRI-7
CODE FR-D7L 26 Draw bolt
Drill CODE 14 Bearing for angle shaft
FR-7BL
(ɸ1～7)
Wire EDM fixture
CODE 7903A5
JIG Tool
19 Head 12 Fixation nut for

DETa-1 Collet angle shaft
21 Collar C 18 Passive gear 16 Collar E
( D7 )→P.8 CODE FBN-7
CODE FBC-7C CODE GRO-7 CODE FBC-7E
HFT4 25 Draw nut and spring

CODE FR-T4NS
Tap sleeve
Information
20 Collar B
Technical
( TA4 )→P.8
22 Bearing for angle shaft CODE FBC-7B 17 Collar D 15 Wave washer 13 Cover
CODE 71804 CODE
CODE FBC-7D FWW-7 CODE FBK-7
Tap ※It is already
( M2～8 ) 　installed in head
24 Angle shaft ( for tapping )
CODE FR-T4
111
HFD7L / HFA10 / HFT4L（ BT30 )
ANGLE HEAD
■Std. Access.
CODE ( Master Holder ) ● Fixing spanner ( KS−23 ) ( HFD7L )
● Hexagonal wrench set ( W−1550S )
BT30ーHFD7Lー120 ● Single-ended wrench ( SN-13 ) ( HFD7L / HFA10 ）
● Fook spanner ( FC−32 ) （ HFA10 ）

ーHFA10ー120
ーHFT4Lー120 ※ 3 , 4 , 9 , 15 and 16 are able to use standard commercial items.
D
28 Positioning pin
1 Shank
CODE Pin type φD L
M/C Tool
CODE BT30-FSA-7
L
HPー45S Straight pin 12 45
HPーE50S Straight pin 18 50
φ14
29 Bracket
CODE S S 2 Orientation ring
FKCー50 50 CODE ORR-30L
FKCー65 65
for Turning Mill
■Note
● Be sure to use positioning pin
3 Angular bearing
(HP-45S) and the bracket (FKC-
CODE 7904C
50) in a combination, and the
positioning pin (HP-E50S)
and the bracket ( FKC-65 ) in
combination.
6 Collar A
28 Positioning pin
CODE FHC-7L
General Purpose
Tool
29 Bracket
5 Housing
CODE FHA-7L
7 Dovetail nut
JIG
CODE FDN-E7

Wrench (for shank)
4 Angular bearing To be used for tightening 9 . It can also be
CODE 7903C used as a wrench for head of HFD12.
CODE
HFD7L 12 Angle shaft ( for drilling )
Equipment
Measuring
8 Collar F TSSーHF7L
CODE FR-D7L
Drill CODE FHC-7LF
( ɸ1～7 )
Wrench (for head)
To be used for tightening 23 and 24 .
DETa-1 Collet 25 Draw bolt 9 Nut and washer for bearing CODE
( D7 )→P.8 CODE FR-7BL CODE AN03/AW03 TSHーHF7
Maintenance Tool
HFA10 13 Angle shaft 10 Drive gear

( for drilling・ CODE GRI-7
26 Nut endmilling )
CODE NUA-CTA10 CODE FR-A10
Drill
Wire EDM fixture
( ɸ2.4～10 )
11 Head
JIG Tool
Spring collet CODE FBA-7

Endmill ( C10 ) →P.8 18 Collar C 2
( ɸ2.4～10 ) 17 Collar B 20 Collar D 22 Wave washer 23 Fixation nut for
CODE FBC-7C CODE FBC-7B CODE FBC-7D CODE
angle shaft
FWW-7
CODE FBN-7
HFT4L 14 Angle shaft
( for tapping )
Tap CODE FR-T4
( M2～8 )
Information
Technical
24 Cover
19 Passive gear 21 Collar E
27 Draw nut and 15 Angular bearing for angle shaft CODE FBK-7
CODE GRO-7 CODE FBC-7E
Tap sleeve spring CODE 71804
( TA4 )→P.8 CODE FR-T4NS 16 Bearing for angle shaft
CODE 7903A5
112
HFD12 / HFT6 ( BT30 / 40 / 50, A63 , DN40 / 50, CT40 / 50)
ANGLE HEAD
1 2 3 4
25 Positioning pin
6 7 8
CODE BT30 / 40, HSK-A63
Shank Orienta- Angular Housing Collar A Collar Intermediate
( Master Holder ) tion Ring bearing AXL bearing CODE Fig. Pin type φD L
BT30 ーHFD12ー122 BT30ー FSAー12S ORRー30 7005ADB FHAーS FHCーS ーー HPー50S 1 Straight pin 18 50
ーHFT 6ー122 ー50W Expansion pin
BT40 ーHFD12ー120 BT40ーFSAー12S ORRー40
ーHFT 6ー120 DN40, CT40
ーHFD12ー180 FHAーL FHCーL 1 Shank
BT40ーFSAー12L HPー62S 1 Straight pin 18 62
ーHFT 6ー180
ー62W Expansion pin
BT50 ーHFD12ー135 BT50ーFSAー12S FHAーS FHCーS
ー50TL 3 Taper pin 20 65
ーHFT 6ー135
ーHFD12ー195 BT50ーFSAー12L FHAーL FHCーL BT50, DN50, CT50
ーHFT 6ー195 HPー62S 1 Straight pin 18 62
M/C Tool
ーHFD12ー255 BT50ーFSAー12XL 7906A5DB FHAーXL FHCーXL1 FHCーXL2 6005VV ー62Sー20 2 20
ーHFT 6ー255 (※) (※) ー62W 1 Expansion pin 18
A63 ーHFD12ー123 A63ーFSAー12S ORRー40 7005ADB FHAーS FHCーS ーーー62Wー20 2 20
ーHFT 6ー123 Fig. ー62T
1 Fig. 23 Fig. 3pin
Taper 28
ーHFD12ー183 A63ーFSAー12L FHAーL FHCーL 2 Orientation
ring
D D D
ーHFT 6ー183 10°
ーHFD12ー243 A63ーFSAー12XL 7906A5DB FHAーXL FHCーXL1 FHCーXL2 6005VV
ーHFT 6ー243 (※) (※)
DN40AーHFD12ー135 ーー L L L
DN40AーFSAー12S ORRー40 7005ADB FHAーS FHCーS
ーHFT 6ー135
ーHFD12ー195 FHAーL FHCーL 3 Angular
DN40AーFSAー12L

bearing ɸ18 ɸ18
ーHFT 6ー195
for Turning Mill

DN50AーHFD12ー135 DN50AーFSAー12S FHAーS FHCーS
ーHFT 6ー135
ーHFD12ー195 DN50AーFSAー12L FHAーL FHCーL 26 Bracket
ーHFT 6ー195 BT30 / 40, HSK-A63
ーHFD12ー255 S
DN50AーFSAー12XL 7906A5DB FHAーXL FHCーXL1 FHCーXL2 6005VV
ーHFT 6ー255 (※) (※) 4 Housing CODE S
CT40　ーHFD12ー135 ORRー40 7005ADB FHAーS FHCーS ーー FKAー60 60
CT40ーFSAー12S
ーHFT 6ー135 ー65 65
ーHFD12ー195 CT40ーFSAー12L FHAーL FHCーL
General Purpose
DN40, CT40
ーHFT 6ー195 5 Dovetail nut
CT50　ーHFD12ー135 FHAーS FHCーS
FKAー60-L 60
CT50ーFSAー12S CODE FDN-M6
ー65-L
Tool
ーHFT 6ー135 65
ーHFD12ー195 CT50ーFSAー12L FHAーL FHCーL BT50, DN50, CT50
ーHFT 6ー195
6 Collar A FKAー 80 80
ーHFD12ー255 CT50ーFSAー12XL 7906A5DB FHAーXL FHCーXL1 FHCーXL2 6005VV
ー 85 85
ーHFT 6ー255 (※) (※)
ー110 110
(※) FHC-XL1/XL2FHC-XL1/XL2 Set 2pcs-each
■Std. Access.
● Fixing spanner ( KS−30 ) ● Hexagonal wrench set ( W−1550S )
7 Collar AXL
● Single-ended wrench 17mm ( SN-17 )
JIG
※ 3 , 8 , 10 , 13 and 16 are able to use standard commercial items.
3
25 Positioning pin
Wrench (for shank)
To be used for tightening 10 .
Equipment
Measuring
8 Intermediate
CODE bearing
TSSーHF12 26 Bracket
Wrench ( for head )

9 Drive gear
To be used for tightening 11 and 12 . CODE GRI-12
CODE
Maintenance Tool
TSHーHF12
10 Nut and washer for bearing

CODE
AN02
21 Angle shaft (for drilling) AW02
HFD12 CODE FR-D12
Drill 24 Draw bolt
( ɸ2.5〜13)
CODE FR - 12BL 11 Fixation nut
17 Head 15 Collar D 13 Thrust bearing for angle shaft
Wire EDM fixture
CODE CODE FBC-12D CODE 51106

FBA-12 CODE FBN-12
19 Collar C
JIG Tool
DETa-1 CODE FBC-12C

Collet(D12) → P.8
23 Draw nut
HFT6 and spring
CODE FR-T6NS
Tap sleeve
(TA6)→P.8 18 Collar B
16 20 Wave washer 16 Bearing for 14 Passive gear 12 Cover
Information
Technical
CODE FWW-12
CODE FBC-12B angle shaft CODE GRO-12 CODE FBK-12
CODE 6805
※It is already
Tap 　installed in head
( M3〜12) 22 Angle shaft
(for tapping)
CODE FR-T6
113
HFA20 / HFT12 ( BT40 / 50, A63, DN40 / 50, CT40 / 50 )
ANGLE HEAD
1 3 5 6 7 8 Positioning pin・ Bracket

CODE
Shank Needle Angular Collar A Housing Angular 27 Positioning pin
( Master Holder )
bearing bearing bearing BT 40, HSK-A63
BT40ーHFA20ー135 BT40ーFSAー20S ー 7906A5 FHCー20S FHAー20S 7905A5
CODE Fig. Pin type φD L
ーHFT12ー135
HPー50S 1 Straight pin 18 50
ーHFA20ー195 BT40ーFSAー20L FHCー20L FHAー20L
ー50W Expansion pin
ーHFT12ー195
BT50ーHFA20ー150 BT50ーFSAー20S FHCー20S FHAー20S
ーHFA20ー210 BT50ーFSAー20L FHCー20L FHAー20L HPー62S 1 Straight pin 18 62
ーHFT12ー210 ー62W Expansion pin
ーHFA20ー270 BT50ーFSAー20XL TAF374720 7905A5DBFHCー20XL FHAー20XL ー 1 Shank ー50TL 3 Taper pin 20 65
M/C Tool
ーHFT12ー270
A63 ーHFA20ー198 A63ーFSAー20L ー 7906A5 FHCー20L FHAー20L 7905A5 BT50, DN50, CT50
ーHFT12ー198 HPー62S 1 Straight pin 18 62
ーHFA20ー258 A63ーFSAー20XL TAF374720 7905A5DBFHCー20XL FHAー20XL ーー62Sー20 2 20
ーHFT12ー258 ー62W 1 Expansion pin 18
DN40AーHFA20ー150 DN40AーFSAー20S ー 7906A5 FHCー20S FHAー20S 7905A5 ー62Wー20 2 20
ーHFT12ー150 ー62T 3 Taper pin 28
ーHFA20ー210 DN40AーFSAー20L FHCー20L FHAー20L Fig. 1 Fig. 2 Fig. 3
ーHFT12ー210
DN50AーHFA20ー150 DN50AーFSAー20S FHCー20S FHAー20S 2 Orientation ring D D D
CODE
10°
ーHFT12ー150 ORR-40
ーHFA20ー210 DN50AーFSAー20L FHCー20L FHAー20L

for Turning Mill
ーHFT12ー210 L L L
ーHFA20ー270 DN50AーFSAー20XL TAF374720 7905A5DB FHCー20XL FHAー20XL ー 3 Needle bearing(XL)
ーHFT12ー270
CT40　ーHFA20ー150 CT40ーFSAー20S ー 7906A5 FHCー20S FHAー20S 7905A5 ɸ18 ɸ18
ーHFT12ー150
ーHFA20ー210 CT40ーFSAー20L FHCー20L FHAー20L 4 Ring A ( XL )
CODE
28 Bracket
ーHFT12ー210 FHR-A
CT50　ーHFA20ー150 CT50ーFSAー20S FHCー20S FHAー20S BT40, HSK-A63,

General Purpose
ーHFA20ー210 CT50ーFtSAー20L FHCー20L FHAー20L 5 Angular bearing CODE S S

ーHFT12ー210 FKBー60 60
Tool
ーHFA20ー270 CT50ーFSAー20XL TAF374720 7905A5DB FHCー20XL FHAー20XL ーー65 65

ーHFT12ー270
BT50, DN50, CT50
6 Collar A
■Std. Access.
● Fixing spanner ( KS−41 ) ● Hexagonal wrench set (W−1550S )
FKAー 80 80
● Fook spanner ( FC−50 ) ( HFA20 )
ー 85 85
ー110 110
※ 3 , 5 , 8 , 16 , 18 and 21 are able to use standard commercial items.
7 Housing

JIG
Wrench (for shank and head) 8 Angular bearing

To be used for tightening 11 and 17 .
CODE
TSーHA20
9 Ring B
CODE FHR-B
Equipment
Measuring
Assembling tool for needle bearings

27 Positioning pin
10 Drive gear
CODE CODE GR1-20
TPNーHA20
11 Shank lock nut
CODE FHN-20 28 Bracket
Maintenance Tool
HFA20
24 Nut 23 Angle shaft ( for drilling ) 12 Dovetail nut
CODE CODE FDN-20
NUT-CTA20 CODE FR-A20
Drill
( ɸ5.8～20 ) 20 Collar B
CODE FBC-20B
14 Passive gear 18 Thrust bearing
Wire EDM fixture
Endmill Spring collet CODE GRO－20 CODE CRT10-20

( ɸ5.8～20 ) 22 Collar C 16 Deep-groove
( C20 ) →P.8 ※Only for HFA20
bearing
JIG Tool
CODE FBC-20C
CODE 6905
HFT12
25 Angle shaft
Tap (for tapping)
Tap sleeve
( M14,16 ) CODE FR-T12
21 Needle bearing 13 Head
( TA12 ) →P.8 17 Fixation nut for
Information
CODE CODE FBA-20 angle shaft

TAF324230P6
Technical
CODE FBN-20
Tap Tap sleeve
( M3～12 ) ( TA6 ) →P.8 15 Bearing supporter
CODE FBK2-20 19 Cover (for drilling)
CODE FBK-A20
26 Draw nut and spring
Cover (for tapping)
CODE FR-T12NS
CODE FBK-T12
114
HUD7 / HUT4 ( BT30 )
ANGLE HEAD
■Std. Access.
CODE ( Master Holder ) ● Fixing spanner ( KS−23 ) ( HUD7 )

BT30ーHUD7ー102
ーHUT4ー102 ※ 3 , 4 , 17 , 23 and 30 are able to
use standard commercial items.
ーHFT4ー102
1 Shank
CODE BT30-FSA-E7
D
32 Positioning pin
CODE Pin type φD L
L
M/C Tool
HPー45S Straight pin 12 45
HPーE50S Straight pin 18 50 2 Orientation ring
CODE ORR-30L
φ14
32 Positioning pin
33 Bracket 3 Angular bearing
CODE 7904A5
CODE S S
FKCー50 50
5 Spacer A
FKCー65 65 CODE FHS-E7A

■Note
for Turning Mill

33 Bracket
(HP-45S) and the bracket (FKC- 7 Collar A
50) in a combination, and the CODE FHC-E7
positioning pin (HP-E50S)
combination.
6 Housing
CODE FHA-E7
General Purpose
21 Cover 2 8 Dovetail nut
CODE FBK-E7 CODE FDN-E7
Tool
4 Angular bearing
CODE 7901A5
22 Fixation nut for angle shaft
CODE FBN-E7
9 Spacer B / Retaining ring
CODE FHS-E7B
23 Bearing
CODE 6901VV 10 Spindle fixation nut
CODE FHN-E7
JIG
24 Collar D 15 Gear 1B
CODE FBC-E7D CODE GR1B-E7
11 Gear 1A
CODE GR1A-E7
27 Gear 2B 16 Collar C
CODE GR2B-E7 CODE FCC-E7C
20 Central shaft fixation nut
2 18 Wave washer
Equipment
Measuring
CODE FCN-E7
27 Head CODE FWW-E7
19 Collar B
CODE FBA-E7 CODE FCC-E7B
14 Gear 2A 13 Cover 1
CODE GR2A-E7 17 Bearing
12 Casing 17 Bearing
Maintenance Tool
CODE FCK-E7
CODE 698
CODE FCA-E7 CODE 698
26 Draw nut and
washer
CODE UR-ET4NS 30 Shell-type needle bearing
CODE TLA1812Z
28 Angle shaft ( for drilling)

29 Angle shaft
Wire EDM fixture
(for tapping) CODE UR-E7

CODE UR-ET4
JIG Tool
Wrench (for shank and head)

To be used for tightening 10 , 20 and 22 .
Tap sleeve 25 Collet draw nut CODE
( TA4 )→P.8 CODE UR-ND7
TS-E7
DETa-1 Collet
( D7 )→P.8
Wrench (for head)・Assembling tool for
Information
Technical
needle bearings
Tap
Drill To be used for tightening 30 .
( M2∼8 ) ( 1∼7 )
CODE
HUT4 HUD7 TPーU7
115
HUD7 / HUA10 / HUT4 ( BT40 / 50, DN40 / 50, CT40 / 50 )
ANGLE HEAD
CODE 1
34 Positioning pin
（ Master Holder ） Shank BT 40
BT40 ーHUD 7ー135 BT40ー FSAーU7 CODE Fig. Pin type φD L
ーHUA10ー135 HPー50S 1 Straight pin 18 50
ーHUT 4ー135 ー50W Expansion pin
BT50 ーHUD 7ー150 BT50ーFSAーU7
ーHUA10ー150 DN40, CT40
ーHUT 4ー150 HPー62S 1 Straight pin 18 62
1 Shank ー62W Expansion pin
DN40AーHUD 7ー150 DN40Aー FSAーU7
ー50TL 3 Taper pin 20 65
ーHUA10ー150
ーHUT 4ー150 BT50, DN50, CT50
DN50AーHUD 7ー150 HPー62S 1 Straight pin 18 62
M/C Tool
DN50AーFSAーU7
ーHUA10ー150 ー62Sー20 2 20
ー62W 1 Expansion pin 18
ーHUT 4ー150
ー62Wー20 2 20
CT40　ーHUD 7ー150 CT40ー FSAーU7 ー62T 3 Taper pin 28
ーHUA10ー150 2 Orientation ring
ーHUT 4ー150 CODE ORR-40
CT50　ーHUD 7ー150 D D D
CT50ーFSAーU7 10°
ーHUA10ー150
ーHUT 4ー150 3 Angular bearing
CODE 7005ADB L L L
■Std. Access.
● Fixing spanner ( KS−21)

for Turning Mill
● Hexagonal wrench set ( W−1550S ) ɸ18 ɸ18

● Fook spanner ( FC−32 )（ HUA10 ）
4 Housing
※ 3 , 8 , 13 , 16 , 21 and 27 are able to
CODE FHA-S 35 Bracket
use standard commercial items. BT40
CODE S S
The tools for assembly FKAー60 60
ー65 65
Wrench (for shank) 5 Dovetail nut
General Purpose
CODE FDN-M6 DN40, CT40

CODE To be used for tightening 8 . FKAー60-L 60
FCー32 ー65-L 65
Tool
6 Collar A BT50, DN50, CT50

Wrench (for head)・ CODE FHC-S FKAー 80 80
ー 85 85
Assembling tool for needle bearings ー110 110
To be used for tightening 16 , 22 and 27 .
3
CODE
TPーU7
JIG
23 Cover 2 7 Collar F 34 Positioning pin

CODE FBK-U7 CODE FHC-7F
22 Fixation nut for 8 Nut and washer

angle shaft for bearing
HUD7 28 D7 type angle shaft CODE CODE AN04/AW04
35 Bracket
FBN-U7
CODE UR-D7
Equipment
Measuring
31 Collet draw nut

21 Angular bearing
CODE UR-ND7
Drill CODE 7901A5DB 9 Gear 1A
16 Nut and washer
( ɸ1～7 ) CODE GR1A-U7 for bearing
CODE AN00/AW00
20 Head
DETa-1 Collet
CODE FBA-U7
( D7 ) →P.8
10 Casing 14 Collar B
Maintenance Tool
CODE FCA-U7 CODE FCC-U7B
HUA10 19 T nut 12 Wave washer

CODE FCT-U7 CODE FWW-U7
Drill
( ɸ2.4～10 ) 30 CTA10 type 13
angle shaft
CODE UR-A10
Wire EDM fixture
15 Gear 1B
24 Collar D 18 Gear 2A 11 Collar C
Endmill Spring collet CODE GR1B-U7
CODE GR2A-U7 CODE FCC-U7C
JIG Tool
( ɸ2.4～10 ) ( C10 )→P.8 CODE FBC-U7D
33 Nut
CODE 25 Gear 2B 13 Angular bearing
NUA-CTH10-32
CODE GR2B-U7 CODE 7900A5DB
17 Cover 1
32 Draw nut and CODE FCK-U7
washer 26 Collar E
CODE UR-T4NS CODE FBC-U7E
HUT4
Information
Technical
Tap 27 Shell-type needle

( M2～8 ) bearing
CODE TLA1812Z
Tap sleeve 29 T4 type angle shaft

( TA4 )→P.8 CODE UR-T4
116
HUA20 / HUT6 ( BT40 / 50, DN40 / 50, CT40 / 50 )
ANGLE HEAD
■Std. Access.
CODE 1 ● Fixing spanner ( KS−33 )
（ Master Holder ） Shank ● Hexagonal wrench set ( W−1560S )
● Fook spanner ( FC−50 ) ( HUA20 )
BT40 ーHUA20ー135 BT40 ー FSAーU20

ーHUT 6ー135 ※ 3 , 7 , 10 , 14 , 17 , 25 , 27 and 29
are able to use standard commercial items.
BT50 ーHUA20ー150 BT50 ー FSAーU20
ーHUT 6ー150
DN40AーHUA20ー150 DN40Aー FSAーU20
ーHUT 6ー150
DN50AーHUA20ー150 1 Shank
DN50Aー FSAーU20
ーHUT 6ー150
CT40 ーHUA20ー150 CT40 ー FSAーU20
M/C Tool
35
ーHUT 6ー150 2 Orientation ring Positioning
CT50 ーHUA20ー150 CT50 ー FSAーU20 CODE ORR-40 pin
ーHUT 6ー150
3 Angular bearing 36
CODE 7906A5
35 Positioning pin Fig.1 Fig.2
Bracket
BT 40 D D 4 Collar A
CODE Fig. Pin type φD L CODE FHC-U20S

ー50W Expansion pin L

L
for Turning Mill

5 Housing
DN40, CT40 ɸ18 CODE FHA-U20
Fig.3
ー62W Expansion pin D 6 Dovetail nut
ー50TL 3 Taper pin 20 65 10° CODE
27 Thrust bearing FDN-20
BT50, DN50, CT50 CODE CRT12-23
HPー62S 1 Straight pin 18 62 L 7 Angular bearing
CODE 7905A5
ー62Sー20 2 20
26 Fixation nut for
General Purpose
ー62W 1 Expansion pin 18 angle shaft
ɸ18 8 Ring B
ー62Wー20 2 20 CODE FBN-U20 CODE FHR-B
Tool
25 Bearing 9 Washer
CODE 6904 CODE TWSSB30-20-1.0
36 Bracket 24 Collar D 10 Nut and washer for bearing

CODE AN04/AW04
BT40, DN40, CT40 CODE FBC-U20D
S
CODE S
FKBー60 60 23 Gear 2B 11 Gear 1A
ー65 65
JIG
CODE GR2B-U20 CODE GR1A-U20
BT50, DN50, CT50

15 Collar B
FKAー 80 80 CODE FCC-U20B
ー 85 85
ー110 110 13 Wave washer 17 Nut and washer
19 T nut CODE FWW-U20 for bearing
22 Head
CODE FCT-U20 CODE AN01/AW01
CODE FBA-U20
14
Equipment
Measuring
21 Gear 2A 20 Collar C 16 Gear 1B
12 Casing
CODE GR2A-U20 CODE FCC-U20C CODE GR1B-U20
CODE FCA-U20
Maintenance Tool
29 Shell-type needle bearing 14 Angular bearing 18 Cover 1

CODE TLA3018Z CODE CODE FCK-U20
TLA3018Z
30 Spacer
CODE FEG-U20
Wire EDM fixture
31 Angle shaft (for drilling ) 33 Angle shaft The tools for assembly
JIG Tool
( for tapping )
CODE UR-U20 CODE UR-T6
34 Draw nut
and washer
Wrench (for shank) Wrench (for head)
CODE
To be used for tightening To be used for tightening 26 .
UR-T6NS
10 and 17 .
Spring collet
( C20 ) →P.8 Tap sleeve CODE CODE
( TA6 )→P.8 TSSーHU20 TSHーHF12
Information
32 Nut
Technical
CODE NUA-CTA20 Assembling tool for needle bearings

Drill・Endmill Tap
CODE
( ɸ5.8～20 ) ( M3～12 )
HUA20 HUT6 TPNーHU20
117
HFCS6 ( BT30 )
ANGLE HEAD
CODE（ Master Holder ） D

29 Positioning pin
BT30ーHFCS6ー155
CODE Pin type φD L
L
■Std. Access. HPー45S Straight pin 12 45
● Fixing spanner ( PS−21 )

HPーE50S Straight pin 18 50
φ14
※ 3 , 7 , 9 , 14 , 15 and 20 are able to use
standard commercial items. 30 Bracket
CODE S S
FKCー50 50
M/C Tool
1 Shank FKCー65 65
CODE BT30-FSA-G6-30
Wrench (for shank) ■Note
To be used for tightening 9 . (HP-45S) and the bracket (FKC-

It can also be used as a wrench for 50) in a combination, and the
head of HFD12. 2 Orientation ring positioning pin (HP-E50S)
CODE CODE ORR-30L
combination.
TSHーHF12
3 Angular bearing
Pliers for Retaining ring
CODE 7904C
for Turning Mill

CODE 29 Positioning pin
TSHーG6 4 Collar A
CODE FHC-7L
30 Bracket
General Purpose
5 Housing
CODE FHA-7L
Tool
6 Dovetail nut
CODE FDN-E7
7 Angular bearing
CODE 7903C
JIG
8 Collar F
CODE FHC-7LF

Equipment
Measuring
CODE AN03/AW03
10 Collar 1
CODE CA1-G6
Maintenance Tool
11 Drive gear
CODE GR1-G6
12 Head
CODE FBA-G6-30 16 Collar 2 18 Gear 1 20 Bearing
CODE CA2-G6 CODE GR3-G6 CODE 688AZZ1
17 Passive gear1 19 Idler shaft 1 26 Back plate

Shrink-fit 15 Bearing CODE GR2-G6 CODE ES1-G6 CODE FBP-G6-30
Drill collet CODE MR126ZZ
Wire EDM fixture
( ɸ3, 4, 6 ) ( FCS ) →P.12 28 Retaining ring

CODE SW17
JIG Tool
14 Bearing
CODE 6803ZZ
Endmill 14
( ɸ3, 4, 6 )
20 18 20
21 Collar 3 25 Collar 5 27 Cover

Information
Technical
CODE CA3-G6 CODE

13 Angle shaft CA5-G6 CODE KA-G6
CODE FR-CS6 23 Collar 4 22 Idler shaft 2
Tap
CODE CA4-G6 CODE ES2-G6
( M4, 5, 6 ) Tap collet
( FCS-M ) →P.12 24 Gear 2
CODE GR4-G6
118
HFCS6（ BT40 / 50 , DN40 / 50, CT40 / 50 )
ANGLE HEAD
CODE（ Master Holder ）
1 28 Positioning pin
Shank
BT40
BT40　ーHFCS6ー160 BT40 ー FSAーG6
CODE Fig. Pin type φD L
　ー205
BT50　ーHFCS6ー175 BT50 ー FSAーG6 ー50W Expansion pin
　ー220 ー50T 3 Taper pin 20
DN40AーHFCS6ー175 DN40Aー FSAーG6 DN40, CT40
ー220
DN50AーHFCS6ー175 DN50Aー FSAーG6 ー62W Expansion pin
ー220 ー50TL 3 Taper pin 20 65
CT40　ーHFCS6ー175 CT40 ー FSAーG6 BT50, DN50, CT50
　ー220
M/C Tool
CT50　ーHFCS6ー175 CT50 ー FSAーG6 1 Shank ー62Sー20 2 20
　ー220 ー62W 1 Expansion pin 18
■Std. Access. ー62Wー20 2 20
● Fixing spanner ( PS−21 )
※ 3 , 8 , 13 , 14 and 19 are able to use 2 Orientation ring D D D
standard commercial items. CODE ORR-40L 10°
※ 17 Gear 3 is a component for BT40-

HFCS6-205 and BT50-HFCS6-220. L L L

3 Angular bearing
for Turning Mill

CODE 7005ADB
ɸ18 ɸ18
4 Collar A 29 Bracket
CODE FHC-S 28 Positioning BT40, DN40, CT40
pin
CODE S
FKAー60 60 S
General Purpose
29 Bracket ー65 65
5 Housing DN40, CT40
Tool
CODE FHA-S FKAー60-L 60
ー65-L 65
BT50, DN50, CT50
6 Dovetail nut
FKAー 80 80
CODE FDN-M6
ー 85 85
ー110 110
3
JIG
7 Collar F
CODE FHC-7F

CODE AN04/AW04
Equipment
Measuring
9 Collar 1
CODE CA1-G6
10 Drive gear
CODE GR1-G6
17 Gear 1 19 Bearing Maintenance Tool
CODE GR3-G6 CODE 688AZZ1
11 Head 14 Bearing
Gear 3 (Long )
CODE MR126ZZ
CODE FBA-G6 CODE GR5-G6
Head (Long ) 15 Collar 2 25 Back plate
CODE FBA-G6L CODE
CODE CA2-G6 FBP-G6
Back plate ( Long )
CODE FBP-G6L
16 Passive gear 1 18 Idler shaft1
CODE GR2-G6 CODE ES1-G6
Drill Shrink-fit collet
Wire EDM fixture
( ɸ3, 4, 6 ) ( FCS )→P.12

27 Retaining ring
JIG Tool
CODE SW17
13 Bearing
CODE 6803ZZ
Endmill 13
( ɸ3, 4, 6 ) 19 19
17
Information
12 Angle shaft 20 Collar 3 24 Collar 5 26 Cover

Technical
CODE CA3-G6 CODE

CODE FR-CS6 CA5-G6 CODE KA-G6
Tap ※ With a draw bolt 22 Collar 4 21 Idler shaft 2
( M4, 5, 6 ) CODE CA4-G6 CODE ES2-G6
Tap collet
( FCS-M )→P.12 23 Gear 2
CODE GR4-G6
119
Technical support
ANGLE HEAD
At MST, we provide the long-term support that allows you to use our products safely and to maintain the
high accuracy of our products for your machining.
1 Pre-sales Provide wide-ranging technical support.

M/C Tool
Tool selection Interference check with 3D drawings Designing manufacturing jig fixtures
for Turning Mill
2 On delivery You will receive instructions.

General Purpose
Tool
Instructions for a heater Maintenance instruction
3 Post-sales
JIG
Our Tool Clinic experts can visit your factory to demonstrate the correct usage, maintenance and give seminars.
Equipment
Measuring
Maintenance Tool
Seminar Evaluation Consulting
Substantial peripheral equipment

Wire EDM fixture
JIG Tool
Test bar
TOOL CAP CHECKMATE
Tool set up stand
P. 97 P. 96
P. 100
Information
Technical
Holder,
Work table Tool washing machine TOOL HOLDER Cutter protection box
6S DESK CLEAN BOX STORAGE CABINET ENDMILL HOUSE Cleaning tool
P. 92 P. 94 P. 103 P. 104 P. 31
120
Instructions for use
ANGLE HEAD
“To ensure optimum, trouble-free performance, please read this operation manual carefully before us-
ing the unit. Please contact us if your holder is damaged. We are ready to help you.”
Instructions for using tool holder

Pay attention to scratches and rust. Tool holder shank.
Before using, be sure to remove anti-rust oil on the holder. If you insert holder shanks with scratches and dust into ma-
M/C Tool
Scratches and dust can reduce performance and accuracy. chine spindles, the accuracy of the spindle is reduced and the
Please keep your holders clean with rags.Our CLEAN BOX spindle can be damaged. For shank maintenance, use an oil
is available for your cleaning needs. grinding stone or sandpaper to remove scratches and rust.
We cannot re-grind shank since it changes the position of
gauge line, so we recommend you to purchase new holders.

CLEAN BOX
P. 94
for Turning Mill

Storage. Retention knob is comsumable.
Please use tool protection covers if you store holders with Exchange the retention knob regularly.(Usage period is de-
cutters.Cutting edges may be damaged by coming in contact pend on the frequency and cutting condition. Approximately 6
with each other, and you may get injured by sharp cutting edges. months for heavy duty cutting. 18months for standard cutting.）
General Purpose
Tool
TOOL CAP
P. 97
ANGLE HEAD
JIG
・The gear and bearing in the angle head are consumables.
Periodic maintenance is required. The inside of the head can
be checked by taking off the aluminum cover and the name plate.
・Be careful about the spindle rotating direction. If used in a wrong
Equipment
Measuring
rotating direction, it will damage the gears.

Tighten with the proper torque. Firmly attach the DETa-1 collet to a rod.
Maintenance Tool
・Excessive tightening will reduce the accuracy and damage Use a collet driver when screwing in the collet all the way
the internal components. until it stops. If the collet is not screwed in enough, the rod
・An adjustable torque wrench, which can tighten the nut with might break.The rod is replaceable.
the appropriate torque, is available for DTA type holders.
Rod
Adjustable torque wrench P. 31
The nut-tightening torque can be adjusted more DETa-1
Wire EDM fixture
COLLET
properly.
JIG Tool
Collet driver
・For the DTB3, the torque is adequate when the wrench
starts to bend.Do not use T-type or L-type wrenches for
tightening. If a commercially-available torque wrench is used,
use a screwdriver type.
Information
Technical
121
COLLET HOLDER
ANGLE HEAD
Do not use a collet that has a notch or nick (flaw) Precautions for collet tightening.
on its tapered surface. First set the collet into the nut. Do not first put the collet into
In order to maintain the accuracy of the tool holder. The collet might get stuck in the tool holder
the main unit, the hardness of the col- Flaw when tightened by the nut.
let is less than that of the main unit.
① ②
If the collet is used with its tapered
surface having a notch or nick (flaw)
in it, poor accuracy or insufficient Nut
tightening can cause an accident.
Replacing the collet will allow you Spring
M/C Tool
collet
to restore the holder to more or
less its initial precision level.
Tighten with the proper torque. Be sure to keep the clamping length of the cutter
Excessive tightening will damage the holder. Clean the tool insertion to a minimum.
holder thoroughly inside and out when setting it up. Not clamping the cutter with the entire clamping length will
When coolant or chips remain on the thread of the tool holder cause degradation of accuracy, slipping out of the cutter, and
or the nut, the frictional resistance decreases. This will cause breakage of the tool holder and the nut.
the torque to be similar to the torque experienced when over-

for Turning Mill
Min. holding
Collet inner diameter length
HOLDER CODE
tightening. Therefore, even if the tightening torque is correct,
it might lead to breakage. φ 2.6～10 20 CTA10, CTH10
Crack φ 6 ～20 40 CTA20, CTH20
φ 6 ～ 9.5 38 CTA25, CTH25
Adjustable torque wrench P. 38 φ10 ～15 48
The nut-tightening torque can be adjusted more properly. φ15.5～25 57
General Purpose
φ25, 28, 30, 32 68 CTA32, CTH32

φ32, 40, 42 70 CTA40
Tool

Do not tighten the collet without inserting a Use the holder within the allowable spindle speed.
cutting tool. HOLDER MAX.min-1
Tightening the nut without inserting BT40, A 63ーART32 6000
JIG
a cutter will cause the clamping por- BT50, A100ーART32 5000

tion of the holder to change shape and BT50, A100ーART42 3000
make it difficult to insert a cutter.
Be sure to insert the cutter shank deeper than After removing the tool, loosen the nut by an-
the minimum clamping depth. other one turn or more.
Equipment
Measuring
If the internal bore gets damaged, accuracy degradation, Otherwise, the next time the tool is clamped, the component
gripping torque degradation and unable insertion of the cutter of the nut might be damaged. This will also prevent you from
might occur. Refer to "Cutter insertion length" on the chart. being able to grip the tool with sufficient strength, causing
Min. holding length the tool to slip during machining.
Cutter shank dia.
ART32 ART42
Maintenance Tool
φ 6,　φ 8 30 35
φ10,　φ12 40 45
φ16,　φ20 50
φ25 55
φ32 66 60
φ42 ー 76
Loosen the nut by

RED screw arbor another one turn or
Wire EDM fixture
more.
JIG Tool
Confirm if an indexable tool can be used.

Some of the indexable end mills cannot be attached to the RED screw arbor. Please check your indexable end mills for confor-
mance to the dimensions, or please contact MST.
φd1
M Holder type M φd1 A B
Information
RSG8 M8 8.5 10 18
Technical
RSG10 M10 10.5 10 22

RSG12 M12 12.5 10 22
A RSG16 M16 17 10 25
B
122
SUMMIT
ANGLE HEAD
Tighten the all bolts at least twice. Precautions for tightening the bolts.
Tighten the bolts in the order of the numbers marked on them. If you are unable to loosen the last one or two bolts, tighten all
the bolts again and then try to loosen all the bolts again little
by little.
2 4 6 2 5 （This occurs when the bolts are not loosened equally and little
by little from the first step.）
1 3 3 1 4 When loosened slowly, the wrench might bend, so loosen the
bolts with instantaneous torque.
SLZ25 SLZ32, 42
M/C Tool
for Turning Mill
General Purpose
Tool
Cutter life comparison depending on different run-out accuracy
JIG
When the cutter run-out accuracy is 10μm, cutter life is 2.2 times longer than with 40μm run-out accuracy.
3000
l li f e 2612 pcs.
e r too
Lo n g
2. 2
2500
s
t ime
2000
Equipment
Measuring
1500 Cutting condition
1000 1182 pcs. Cutting tool ： φ0.1 mm drill
Material ： NAK80 (40HRC)
500 Coolant ： Water solubility
coolant
0 Revolution ： 20,000min -1 Maintenance Tool
Feed ： 60 mm/min
Step feed ： Non-step
Depth ： 0.4 mm
10μm 1μm
Cutter life comparison when using cutter-through coolant and external coolant
Wire EDM fixture
Applying the cutter-through coolant improves the tool life 3.7 times higher than when external coolant is used.
JIG Tool
Cutter-through
coolant Cutter with oil hole
fe
ol li
r to
Information
ge
Technical
External coolant Lo n
3.7
s
t ime
0 50 100 150 Cutting length(m)
123
For high-speed spindle rotation
ANGLE HEAD
Imbalance value of a machine tool spindle and a tool holder

A tool holder imbalance value (G grade) focuses at high-speed spindle rotation of a machining center. However, it is important
to consider the entire rotation body, including the spindle, holder and cutter to determine the high-speed spindle rotation. This is
because the holder and cutter weight is much lighter than the spindle weight (less than approx. 1/20th), and thus the effect of a
tool holder on the spindle rotating equipment (spindle, tool holder and cutter) becomes significantly smaller.
Tool holder
Mass：1.3kg
Imbalance value：10g• mm
M/C Tool
Spindle
Mass：20kg
Imbalance value：28g • mm
for Turning Mill
Points to keep in mind at high-speed rotation.

● Minimize the length of a tool holder and cutting tool as short as possible.
● Use high accuracy and compact design tool holders.
● Optimize the cutting condition(rpm, feed and depth of cut).
Spending time and money on balance corrections to the holder alone will not result in significant improvement.
General Purpose
Tool
PRE-BALANCED DESIGN
MST has applied our original pre-balancing to make the tool holders applicable for high-speed spindle rotation. Balancing correc-
tions for our products is not required.
Pre-balanced design
JIG
Equipment
Measuring
● Counter-balancing at imbalanced design areas.

● O.D finish grinding after heat treatment.
Unbalancing in terms of tolerable residual ration against the balancing grade(G grade value)
Maintenance Tool
20000
10000 G1
00
5000
2000
1000
G4
0
Balance value / Weight (g・mm/kg)
500
Wire EDM fixture
200 G1
6
JIG Tool
100
50 G6
.3
20
G2
10 .5
5
2
G1
1
Information
Technical
0.5 G0
.4
0.2
0.1
30 50 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000
Rotation speed (min -1)
124
HSK SHANK
ANGLE HEAD
MST uses DIN-HSK standard shanks, which are widely used in Japan and other countries as
“2-face contact tooling” for high-speed, high-efficiency machining.
The close contact of the end faces (2-face contact) of the HSK shank results in high rigidity for transverse feed, which
minimizes vibrations during machining and improves the operating life of the cutting tool and the finished surface.
Even if the spindle expands during high-speed rotations, the tapered hollow portion comes up with that expansion,
thereby maintaining high precision.
M/C Tool
A type E type F type T type

The most common type This type has no drive This type uses a combination This type is for
for Turning Mill

in use today. keyway and is suitable for of different sizes of tapers turning with multiple
high-speed machining. and flanges. machining
Pre-Balanced design Three times stronger clamping force

The HSK-A-type shank is unbalanced in its standard form, but HSK uses a clamping mechanism, which utilizes the wedge
General Purpose
at MST we have applied our original pre-balancing to make the effect, to provide a tool gripping power 2.5 to 3.0 times greater
tool holders applicable for high-speed machining. According to than in the retention knob system (BT40 and BT50), thereby
Tool
DIN standards, only the area marked with * in the hollow shank increasing rigidity.
needs to be finished. However, MST provides perfect finishing Tensile Tool
for all areas after heat treatment in order to improve balance. strength clamping
of draw bar force
Unclamping
Pre-balanced
※
design BT40 10～15kN 10～15kN
DIN
MST A63 5.8kN 18.4kN
standard
G Clamping
A63 15 g・mm 75g・mm BT50 20～25kN 20～25kN
JIG
A100 28 g・mm 170g・mm A100 14.5kN 45.9kN
Rigidity comparison with BT shank Taper gauge

The HSK shank is effective when longer overhang or higher MST establishes the optimal value within the tolerance in accor-
Equipment
Measuring
transverse feed rigidity is required. The higher rigidity greatly dance with the DIN standard and manufacturers master gauges
contributes to improve the operating life of the cutting tool for tool shanks and those for spindle tapers accordingly.
and the smoothness of the finished surface.
A63 A100
φ63 φ100
Maintenance Tool
more rigidity
BT40
φ44.45
1.4times BT50
φ69.85
1/10 taper 1/10 taper Detection gauge

ring gauge plug gauge for end face position
Coolant duct TOOLING SYSTEMS for HSK-T

Wire EDM fixture
This is a coolant feed part exclusively for the HSK-A type.

JIG Tool
Collaborative development with 17 Japanese manufacturers has resulted

MST's HSK-A type holder comes standard with each coolant in an interface for mill-turning machines based on the HSK-A type. With its
duct. 2008 ISO accreditation, it has become popular standard around the world.
HSK-A Rotating tools

Information
Technical
For some machines, the use of a coolant

duct (Adjustable) is recommended. The
existing coolant duct is replaced with an
adjustable one at your request only when
you have placed an order for the holder.
HSK-T Turning tools Turning mill machine
Coolant duct P. 110
125
Technical data
ANGLE HEAD
The shank dimensions

HSK-A ( Extracts from DIN 69893- 1;1993- 07 )
ℓ3 ℓ2 f3
Shank A40 A50 A63 A100 A125
60°±15
b1 (H10) 8 10.5 12.5 20 25 f4
1/10taper
b2 (H10) 9 12 16 20 25
b3 (H10) 11 14 18 22 28
d1 40 50 63 100 125
M/C Tool
(h10)
30 38 48 75 95 d4 d1
d2 +0.007 +0.009 +0.011 +0.015 +0.018 d2
d3
+0.005 +0.006 +0.007 +0.009 +0.011
29.05 36.9 46.53 72.6 91.95
d3 +0.005 +0.006 +0.007 +0.009 +0.011
+0.003 +0.003 +0.003 +0.003 +0.004 ℓ1 f1
d4 (max.) 34 42 53 85 105 b2 f2
d8 (H10) 21 26 34 53 67 b1
d9 (H11) 25.5 32 40 63 80
h2
d10 23 29 37 58 73
for Turning Mill
ℓ5
d11 M12 × 1 M16 × 1 M18 × 1 M24 × 1.5 M30 × 1.5
r3
d14 (max.) 5 6.8 8.4 12 14
e1 10.88 13.797 17.862 27.329 35.324 e1 h2
h1
f1 ( 　0　
− 0.1 ) 20 26 26 29 29 d9 d10 d8 d14
f2 (min.) 35 42 42 45 45 h1
f3 ( ± 0.1) 16 18 18 20 20
General Purpose
f4 ( ＋　0 0.15 ) 2 3.75 3.75 3.75 3.75 ℓ4

d11
h1 ( 　0　
− 0.2 ) 17 21 26.5 44 55.5 b3
Tool
30°-30°
0
h2 ( 　0　
− 0.3 ) 12 15.5 20 31.5 39.5
ℓ6 ℓ7 ℓ8
ℓ 1 ( 　0　
− 0.2 ) 20 25 32 50 63
ℓ2 4 5 6.3 10 12.5
ℓ3 9.5 11 14.7 24 30.5
ℓ 4 ( ＋　00.2 ) 6 7.5 10 15 19
ℓ 5 ( ＋　00.2 ) 3.5 4.5 6 10 12
ℓ 6 (JS10) 11.42 14.13 18.13 28.56 36.27
JIG
ℓ 7 ( 　0　
− 0.1 ) 8 10 10 12.5 16
ℓ 8 ( 　0　
− 0.3 ) 8 10 12 16 18
ℓ 12 12 19 21 24 24
r3 ( ＋ー 0.05
0.05
) 1.88 2.38 2.88 4.88 5.88
r8 4.5 6 8 10 5
Equipment
Measuring
HSK-E ( Extracts from DIN 69893- 1;1993- 07 )

ℓ2
Shank E25 E32 E40 E50 ℓ3 f3
60°±15
d1 (h10) 25 32 40 50 f4
19 24 30 38 1/10taper
Maintenance Tool
d2 +0.006 +0.007 +0.007 +0.009

+0.004 +0.005 +0.005 +0.006
18.15 23.27 29.05 36.90
d3 +0.004 +0.005 +0.005 +0.006
d4 d1
+0.002 +0.003 +0.003 +0.003 d3
d4 (max.) 20 26 34 42 d2
d8 (H10) 14 17 21 26
d9 16.4 21 25.5 32
Wire EDM fixture
(H11)
ℓ1 f1
d10 15 19 23 29
JIG Tool
f2
d11 (max.) 3 4.2 5 6.8
ℓ 1 ( 　0　
− 0.2 ) 13 16 20 25
ℓ2 2.5 3.2 4 5
ℓ3 8.5 7.3 9.5 11
ℓ 4 (JS10) 7.21 8.92 11.42 14.13 d9 d10 d8 d11
ℓ 5 ( 　0　
− 0.1 ) 6 8 8 10
Information
Technical
f1 ( 　0　
− 0.1 ) 10 20 20 26
f2 (min.) 20 35 35 42
f3 ( ± 0.1) 4.5 16 16 18
30°-30°
0
f4 ( ＋　0
0.15
) 2 2 2 3.75 ℓ4 ℓ5
126
HSK-F ( Extracts from DIN 69893- 1;1993- 07 )
ANGLE HEAD
Shank F63 F80
d1 (h10) 63 80 ℓ2
ℓ3 f3
38 48
d2 +0.009 +0.011
60°±15
f4
+0.006 +0.007
36.9 46.53 1/10 taper
d3 +0.006 +0.007
+0.003 +0.003
d4 (max.) 53 67
d4 d1
d8 (H10) 26 34 d2
d3
d9 (H11) 32 40
M/C Tool
d10 29 37
f1 　0　
( − 0.1 ) 26 26 ℓ1 f1
f2 (min.) 42 42 f2
f3 ( ± 0.1) 18 18
f4 ＋ 0.15
( 　0 ) 3.75 3.75
ℓ 1 　0　
( − 0.2 ) 25 32
ℓ2 5 6.3
ℓ3 11 14.7 d10 d8 φ5 φ12 +0.027

d9 0
for Turning Mill

ℓ 4 (Js10 ) 14.13 18.13 3 0°
ℓ 5 　0　
( − 0.1 ) 10 10
f1 26 26 30°-30°
0
　0　
( − 0.1 ) 1.5
ℓ4
f2 (min.) 42 42 ℓ5 7+0.2
0
f3 ( ± 0.1) 18 18
f4 ＋ 0.15
( 　0 ) 3.75 3.75
General Purpose
Tool
HSK-T ( Extracts from DIN 69893- 1;1993- 07 ) For turning with turning mill machines
ℓ2 f3
Shank T40 T50 T63 T100 T125 1/10 taper 60°±15
b1 (＋0.04
ー0.04 ) 8.05 10.54 12.54 20.02 25.02 f4
(2°52' 05")
b2 (H10) 9 12 16 20 25
b3 (H10) 11 14 18 22 28
JIG
7.932 10.425 12.425 19.91 24.915
b5 +0.03 +0.035 +0.04 d9 d1
0 0 0 d2
d1 (h10) 40 50 63 100 125
d2 30.007 38.009 48.010 75.013 95.016
b2
d3 21 26 34 53 67
Equipment
Measuring
(H10) ℓ1 f1
b1
d4 (H11) 25.5 32 40 63 80
h2
f2
d5 23 29 37 58 73 ℓ4
d6 (max.) 5 6.8 8.4 12 14
r3
d9 (max.) 39 49 62 99 124
h1
d15 M12 × 1 M16 × 1 M18 × 1 M24 × 1.5 M30 × 1.5 e1 h2
Maintenance Tool
e1 11 13.88 17.99 27.37 35.37 d 4 d 5 d3 d6
f1 (　0　
−0.1 ) 20 26 26 29 29 h1
f2 (min.) 23 30 30 34 34
ℓ3
f3 ( ± 0.1) 16 18 18 20 20 d15
b5
f4 ( ＋ 0.15
　0 ) 2 3.75 3.75 3.75 3.75 30°-30°
0
h1 ( 　0　
− 0.2 ) 17 21 26.5 44 55.5 b3 ℓ5 ℓ6 ℓ9
Wire EDM fixture
h2 ( 　0　
− 0.3 ) 12 15.5 20 31.5 39.5
ℓ 1 20 25 32 50 63
JIG Tool
( 　0　
− 0.2 )
ℓ2 4 5 6.3 10 12.5
ℓ 3 (+0.2
　0 ) 6 7.5 10 15 19
ℓ 4 ( +0.2
　0 ) 3.5 4.5 6 10 12
ℓ 5 (JS10) 11.42 14.13 18.13 28.56 36.27
ℓ 6 ( 　0　
− 0.1 ) 8 10 10 12.5 16
Information
ℓ 9
Technical
(　0　
−0.3 ) 8 10 12 16 18
ℓ 12 12 19 21 24 24
r3 (ー 0.05 )
＋ 0.05
1.88 2.38 2.88 4.88 5.88
r9 4.5 6 8 10 5
127
BT ( Extracts from MAS 403 )
ANGLE HEAD
0
3 0° 0
Shank BT30 BT40 BT50 －1
3 0°
5'
－1
5'
D1 31.75 44.45 69.85 7/24 taper

ℓ 1 ( ± 0.15) 48.4 65.4 101.8
d2 (H8) 12.5 17 25
g (6H) M12 M16 M24
b d2 D5
ℓ 2 (min.) 24 30 45 D1 ℓ5
ℓ 3 (min.) 34 43 62
g
ℓ 4 7 9 13 ℓ4
b (H12) 16.1 16.1 25.7 t t ℓ2 v
ℓ 5 (min.) 17 21 31 ℓ3
t (
　0　
− 0.2 ) 16.3 22.6 35.4 ℓ1
M/C Tool
f
D5 (h8) 46 63 100 Gauge line
y
f 20 25 35
v ( ± 0.1) 13.6 16.6 23.2
y ( ± 0.4) 2 2 3
DIN (DIN69871-1)
Shank DN40 DN50

b1
for Turning Mill
D1 44.45 69.85
D2 63.55 97.5
D3 56.25 91.25 t1
D4 50 80
t3 t 2
L1 68.4 101.75
L3 3.75 6.495 7/24 taper
b1 16.1 25.7
General Purpose
t3
d1 17 25
Tool
t1 22.8 35.5
t2 25 37.7
t3 18.5 30
CAT.
b1
Shank CT40 CT50
JIG
D1 1.75” 2.75”
D2 2.5” 3.88” t1
D3 2.22” 3.59”
D4 1.75” 2.75” t2
L1 2.69” 4”
b1 .65” 1.06” 7/24 taper
Equipment
Measuring
d1 .64” 1.03”
t1 .99” 1.49”
t2 .84” 1.39”
Maintenance Tool
Wire EDM fixture
JIG Tool
Information
Technical
128
Drill hole size in metric Drill hole size in Drill hole size in screw Dia. of tap shank
ANGLE HEAD
coarse screw thread unified screw threads for pipe
D1 D2
Nominal size Drill Nominal size Drill Nominal
Rc ( PT ) Rp ( PS ) G ( PF )
x pitch hole dia. x pitch hole dia. size
1/8 Unified Gas
M 1 ×0.25 0.75 NO. 1 ー 64UNC 1.55 8.2 8.5 8.8 Metric screw
screw screw
NO. 2 ー 56UNC 1.8 1/4 10.9 11.4 11.87 threads
M 1.2×0.25 0.95 threads φD
2
threads
NO. 3 ー 48UNC 2.1 3/8 14.4 14.9 15.38
M 1.6×0.35 1.25 φD1
NO. 4 ー 40UNC 2.3 1/2 18 18.5 19.1
M 2 ×0.4 1.6 M 1～M 2.6 UNo. 0～ 4 3
NO. 5 ー 40UNC 2.6 5/8 ーー 21
M 2.5×0.45 2.1 M 3・M 3.5 UNo. 5 ・ 6 4
NO. 6 ー 32UNC 2.8 3/4 23 24 24.6
M 3 ×0.5 2.5 7/8
M 4・M 4.5 UNo. 8 5
NO. 8 ー 32UNC 3.4 ーー 28.3
M 4 ×0.7 3.3 M 5・M 5.5 UNo.10 ・12 5.5
NO.10 ー 24UNC 3.9 1 29 30 30.9
M 5 ×0.8 4.2 M 6 U 1/　4 6
NO.12 ー 24UNC 4.5 1 1/8 ーー 35.5
U 5/16 6.1
M/C Tool
M 6 ×1 5 1/　4 ー 20UNC 5.1 1 1/4 38 39 39.4
M 8 ×1.25 6.8 M 7・M 8 6.2
5/16 ー 18UNC 6.6 1 1/2 44 45 45.4
M 9・M10 U 3/　8 7
M10 ×1.5 8.5 3/　8 ー 16UNC 8
7/16 ー 14UNC
M11 U 7/16 P1/16・1/8 8
M12 ×1.75 10.3 9.4
1/　2 ー 13UNC
M12 8.5
M16 ×2 14 10.8
9/16 ー 12UNC
U 1/　2 9
M20 ×2.5 17.5 12.2
5/　8 ー 11UNC
M13 9.5
M24 ×3 21 13.6
3/　4 ー 10UNC
M14・M15 U 9/16 10.5
16.5
M30 ×3.5 26.5 P 1/4 11
7/　8 ー　9UNC 19.5
M33 ×3.5 29.5 U 5/　8 12
1 　ー　8UNC 22.2

M36 ×4 32 M16 12.5
1 1/　8 ー　7UNC 25
for Turning Mill

M39 ×4 35 M17 13
1 1/　4 ー　7UNC 28.2
M42 ×4.5 37.5 M18 U 3/　4 P 3/8 14
1 3/　8 ー　6UNC 30.8
M45 ×4.5 40.5 M20 15
1 1/　2 ー　6UNC 34
M22 U 7/　8 17
M48 ×5 43 1 3/　4 ー　5UNC 39.5
P 1/2 18
M24・M25 P 5/8 19
M26・M27 U1 20
Dimensional tolerance of typically used mating (JIS B 0401) M28 21
General Purpose
U1 1/　8 22
The class of The tolerance of the hole The tolerance of the shaft
M30 P 3/4 23
Tool
dimension ( mm ) dimension ( μm ) dimension ( μm )
M32 U1 1/　4 P 7/8 24
More Less
H4 H5 H6 H7 H8 H9 h4 h5 h6 h7 h8 h9 M33 25
than than
M35 U1 3/　8 P1 26
+3 +4 +6 +10 +14 +25 0 0 0 0 0 0
ー 3 M36・M38 P1 1/8 28
0 0 0 0 0 0 -3 -4 -6 -10 -14 -25
+4 +5 +8 +12 +18 +30 0 0 0 0 0 0 M39・M40 U1 1/　2 30
3 6 M42 U1 5/　8 P1 1/4 32
0 0 0 0 0 0 -4 -5 -8 -12 -18 -30
+4 +6 +9 +15 +22 +36 0 0 0 0 0 0 M45 U1 3/　4 P1 3/8 35
6 10
0 0 0 0 0 0 -4 -6 -9 -15 -22 -36 M48 P1 1/2 38
JIG
+5 +8 +11 +18 +27 +43 0 0 0 0 0 0 M50 U2 P1 5/8 40
10 18
0 0 0 0 0 0 -5 -8 -11 -18 -27 -43
M52 P1 3/4 42
+6 +9 +13 +21 +33 +52 0 0 0 0 0 0
18 30
0 0 0 0 0 0 -6 -9 -13 -21 -33 -52
+7 +11 +16 +25 +39 +62 0 0 0 0 0 0
30 50
0 0 0 0 0 0 -7 -11 -16 -25 -39 -62
+8 +13 +19 +30 +46 +74 0 0 0 0 0 0
50 80
Equipment
Measuring
0 0 0 0 0 0 -8 -13 -19 -30 -46 -74
+10 +15 +22 +35 +54 +87 0 0 0 0 0 0
Conversion table for Interna-
80 120
0 0 0 0 0 0 -10 -15 -22 -35 -54 -87 tional System of Units
+12 +18 +25 +40 +63 +100 0 0 0 0 0 0
120 180
0 0 0 0 0 0 -12 -18 -25 -40 -63 -100
Force
+14 +20 +29 +46 +72 +115 0 0 0 0 0 0 N kgf・m
180 250 1 1.01972×10-1
0 0 0 0 0 0 -14 -20 -29 -46 -72 -115
+16 +23 +32 +52 +81 +130 0 0 0 0 0 0 9.80665 1
250 315
Maintenance Tool
0 0 0 0 0 0 -16 -23 -32 -52 -81 -130
+18 +25 +36 +57 +89 +140 0 0 0 0 0 0 Pressure
315 400
0 0 0 0 0 0 -18 -25 -36 -57 -89 -140 Pa kgf / mm2
+20 +27 +40 +63 +97 +155 0 0 0 0 0 0 1 1.01972×10-7
400 500
0 0 0 0 0 0 -20 -27 -40 -63 -97 -155 9.80665×106 1
Stress
Pa kgf / cm2
1 1.01972×10-5
Wire EDM fixture
9.80665×104 1
JIG Tool
Information
Technical
129
INDEX
ANGLE HEAD
CODE NAME Page CODE NAME Page

ABー15 Semi-finished positioning block 19 F ー 38 Spanner・Wrench 109
ABF005 Positioning block list for machines 7 F ー 38AW Spanner for torque wrench 109
F190ーAHA20ー200 Angle head SOLID type 15 F160 H32 ー A40 Mounting plate (SMART GRIP) 81
BT40ーAHA20ー160 Angle head FLANGE type 17 The Manual clamping head

F160 H32 ー A40 ー 50 81
(SMART GRIP)
BT50ーAHB5ー225 Angle head MODULAR type 15
Hydraulic automatic clamping head
F100S65 ー A63 ー 89 80
BT50ーAHC10ー245 (SMART GRIP)
F190ーAHD30ー200 Angle head SOLID type 16 FC ー 32 Spanner 109
A BT50ーAHD30ー195 Angle head SOLID type 16

F FC ー 36AW Spanner for torque wrench 109
BT40－AHU10－175 Angle head UNIVERSAL type 18 FCS6 ー 3 Shrink-fit collet 12
AJBーM6ーL Adjust screw (Wire cut unit) 108 FCS6 ー M4 Tap collet 12
M/C Tool
FKA ー 60 Stationary bracket 111～

AJCーM14 Adjust screw(Coller holder) 37
(ANGLE HEAD HALF)
FKB ー 60
AJNーM18L Adjust screw(Summit) 44
FKC ー 50
AP40ーT30V Adapter 101
Spanner with ejection hook
BT50ーART32ー105 Hi-ART MILLING CHUCK 41 FM ー 72 109
(Hi-ART MILLING CHUCK)
AWー1 Adjustable torque wrench 109
CUTTER ARBOR WITH
BT40 ー FMH16 ー 29 ー 45 55
B T50ーBL40ー42 BLANK TOOL (Tool for turning mill) 74 SPINDLE-THROUGH COOLANT
C10 ー 6 SPRING COLLET 8, 38 BT50 ー FMH 22 ー 47 ー 165H FMH Rigid type 47
C10 ー A set SPRING COLLET Standard set 38 A40 ー FP40- 35 Flange clamping (SMART GRIP) 84
for Turning Mill
C10 ー RM Collet remover 38 G GRP ー 002 Grip 108
T63 ー CAAX52 ー 150 CHECKING ARBOR 74

Semi-finished positioning
HB ー 01 7
block (ANGLE HEAD HALF)
CAP2022 Cap dispenser 98
HBX ー A40 TOOL HOLDER STORING CABINET 111
CBX ー 01 CLEAN BOX 93
HF ー BT30 Tool set up stand (Vice clamping type) 101
T63 － CC32 － 90 SET SCREW HOLDERS FOR ROUND SHANK 71
BT30 ー HFA10 ー 120 Angle head 90 type 8
CCD094 ー PA Throw-away tip 65 BT30 ー HFCS6 ー 155 Angle head mini type 12
General Purpose
CD40 ー 01 Coolant duct ( fixed) 110 H BT40 ー HFD7 ー 120 ANGLE HEAD HALF 90 type 8
Tool
CD50 ー A1 Coolant duct (Dummy duct) 110 BT30 ー HFT4 ー 122
CD63 ー 01F Coolant duct (Adjustable) 110 HP-50S Positioning pin (ANGLE HEAD HALF) 111 ～
CE-CTS10 Collet remover 38 BT40 ー HUA10 ー 135 Angle head (UNIVERSAL HALF) 10
CF12-4-35 SLIMLINE collet ※ BT30 ー HUD7 ー 102

C
CLP ー 7E Coolant cap 30 BT30 ー HUT4 ー 102
CLP ー 101 Clamper (Wire Cut Unit) 108 I IR 15 ー A40FP Positioner boss (SMART GRIP) 84
NT30 ー CMA ー 20 ー 125 TEST BAR CHECKMATE 96 J JAE ー 501 Extension Jaw 106
JIG
HSK32 ー CMB ー 25 ー 175 K KJ ー 45 Insert and insert holder set 65
MB5 ー 112 Head 15

CN ー 103 Container box 103
Clamp bolt (CUTTER ARBOR WITH
T100 ー CN40 ー 115 Nozzle-coolant 71 MBF-M12 57
SPINDLE-THROUGH COOLANT)
CP ー 14M Coolant screw 39
BT40 ー MBH50 ー 150 MICRO HEAD MBH type 62
CR12-6-55 SLIMLINE collet ※ BT30 ー MBJ45 ー 120 MICRO HEAD MBJ type 64
Equipment
Measuring
CS12-3-80 BT50 ー MBJ70 ー 165 MICRO HEAD MBJ 70type 65
CSA ー M14 Coolant screw 39 M MC10 ー 132 Head 15
CSR ー 14 Coolant screw (Collet Holder) 39 MDV ー 501 MIDDLE VISE 105
BT50 ー MFA20 ー 165 MICRO HEAD MFA type 60

BT30 ー CTA10 ー 45 Collet Holder 36
BT40 ー MS ー 98 Shank 15
BT50 ー CTH10 ー 105 COLLET HOLDER 34
MS2 ー 30 Extension 60
Maintenance Tool
E32 ー CTS10 ー 50
for high-speed 35
MU ー S6H Universal Facing Boring Head 75
D7 ー 1.5 DETa-1 Collet 31
MY CUBE50 MY CUBE 101
A40 ー DOC17.5 ー 55 Dovetail clamping (SMART GRIP) 82
NOZ ー M6 ー 12 Nozzle 42, 44, 109
A63 ー DOV110I Dovetail vise A,B(SMART GRIP) 83
N NUA ー CTA10 Nut 37, 110
DR ー 1 Collet driver 31 NUB ー CTH10 ー 3.6 SUKIMA nut 39, 110

D
BT40 ー DTA3 ー 95 DETa-1 Collet Holder A type 24 P30T ー 1 RETENTION KNOB 67
DETa-1 Collet Holder B type P ー 445

Wire EDM fixture
BT50 － DTB7 － 75 26
A50 － DTE7 － 105 DETa-1 Collet Holder E type 28 P ー 535/538 BT30ーDTB12 Retention knob 27
JIG Tool
DW ー 2.5 ー 110 Wrench 31, 109 PA ー R ー 1 PALETTE 102
PCT01 ー 10 Cleaning tool 31

7EA ー 3.5 ー 3 Spacer 30 P
PETIT BALL40 PETIT BALL 101
12EBF ー BL ー 5
PJ ー 45 Insert and insert holder set 65
12EBM ー 3 ー 3
PR ー DTA3 Rod (DETa-1 Collet Holder DTA3 type) 25
12EBS ー 3.6 ー 3
E PTC10 Cartridge (MICRO HEAD MBH type) 63
Information
Technical
EMO ー STD3 ー 2 ENDMILL HOUSE 104

PTE ー 001 Extension Plate 108
ER8 ー 4 SPRING COLLET 19 RC ー 26 CTS Special wrench 38, 109
7ES ー A Spacer set 30

R RS ー A63 ー A40 Adapter(SMART GRIP) 85
ESX12 ー 6 SPRING COLLET 19 BT40 ー RSG8 ー 105 ー M25 RED SCREW arbor 49
130
CODE NAME Page
ANGLE HEAD
S42 ー 6F Straight collet 42
S ー STA12 Insert 65
S ー STV1822
T63 ー SA2525 ー 105 INSERT HOLDERS 72
T63 ー SB2525 ー 95
FOR SQUARE-SHANK 73
T50 ー SC2020R ー 95
T40 ー SH2020 ー 75 INSERT HOLDERS FOR SQUARE-SHANK 74
A40 ー SCD 20 ー 55 Side clamp B(SMART GRIP ) 85
A40 ー SCS 10 ー 40 Side clamp A(SMART GRIP ) 85
BT50 ー SLFB4 ー 90 ー M22 SLIMLINE MONO series ※

BT50 ー SLK12 ー 75 SLIMLINE 2PIECE type Master holder ※
M/C Tool
BT50 ー SLRA4 ー 110 ー M42 SLIMLINE MONO series ※
BT50 ー SLRB8 ー 110 ー M42 SLIMLINE STRAIGHT ARBOR
BT50 ー SLSA4 ー 140 ー M42
S
BT50 ー SLSB8 ー 140 ー M42
A100 ー SLZ25 ー 135 SUMMIT 44
T50 ー SN2020R ー 110 INSERT HOLDERS FOR SQUARE-SHANK 73
SRC ー 501 Clamp on Slider 106
SRL ー 501 Slider

SRS ー 501 Sandwich Slider
for Turning Mill

SRV ー 501 Slider
SRV ー 01 Dedicated bracket 98
SS32 ー 8 Sleeve for a set screw holder 71
STB ー M6 ー L Stud bolt 108
STGP10 Cartridge 63
STH18 Insert 65
General Purpose
STV ー C12055 Insert 64
T40 ー SV2020R ー 90 INSERT HOLDERS FOR SQUARE-SHANK 72
Tool
TA4 ー M2 Tap sleeve 8
TBU10 TEST BAR 18
TCA2022 ー 10 TOOL CAP　TCA type 98
TCB0820 ー 10 TOOL CAP　TCB type 98
TCC0607 ー 50 TOOL CAP　TCC type 99
TCC ー F Variety set 99

T
TNB114 ー PB MICRO HEAD MBH type 63
JIG
TPA082 ー PA MICRO HEAD MFA type 60
TPC112 ー PA MICRO HEAD MBJ/MBH type 65
TPE042 ー PA MICRO HEAD MBJ type 64
TR ー 5 Tap rod (DETa-1 COLLET HOLDERDTEtype) 30
TW ー 4 Wrench 31, 109
W ー 206 Wrench 44, 109
Equipment
Measuring
W W ー 135DR Spanner・Wrench 31, 109
WCU ー A WIRE CUT UNIT 108

BT40 ー ZPB ー 200 Goo CHECKER 89
Z (Set up the original point on the Z axis /
BT40 ー ZPM ー 150 measuring tool for reference position)
1 2 3 6SD ー 01 6S DESK 92

Maintenance Tool
※See our dedicated catalog for shrink-fit holder SLIMLINE.
Wire EDM fixture
JIG Tool
Information
Technical
131
OVERSEAS NETWORK
Logistic center (J-COMPO) ●USA / Chicago ●Germany / Nuremburg ●China / Hong Kong ●Thai
< Europe> 1709
BELGIUM 2 distributors FINLAND 1 distributor
DIATOOL BVBA MachinImmo BVBA OY FMS TOOLS AB

TURNHOUT LOKEREN HELSINKI
MR. GELDHOF TEL 32-14401830 MR. MANU COPPENS TEL 32-93288811 [email protected] TEL 358-98190950
[email protected] FAX 32-14438880 [email protected] FAX 358-981909550
CZECH REPUBLIC 2 distributor GERMANY 4 distributors
Creative Tools s.r.o. Precision Tools Service Czech s.r.o. Aura Frästechnik GMBH
SKALKA PRAHA BREIDENBACH
MR. PETR CHYTIL TEL 420-725588988 [email protected] TEL 420-225020413 MR. MAIK BRADO TEL 49-646591119414
[email protected] FAX 420-582384485 FAX 420-225020444 [email protected] FAX 49-646591119429
DENMARK 2 distributors HSC TECHNIK

SCHNELLDORF
Balling Maskiner ApS OSG SCANDINAVIA A/S MR. LANGOHR TEL 49-79502132
KOLDING ROSKILDE [email protected] FAX 49-79501302
MR. MICHAEL BALLING PETERSEN TEL 45-24790300 [email protected] TEL 45-46756555
[email protected] FAX 45-46756700 MAKINO GMBH
TEL 49-7021503201
FRANCE 2 distributors
DOGA S.A. OSG France s.a.r.l. OSG GMBH

MAUREPAS ROISSY Göppingen
MR. ANTY TEL 33-130664141 MR. MICHAEL LINANT TEL 33-149901010 [email protected] TEL 49-716160640
[email protected] FAX 33-130664199 [email protected] FAX 33-149901015 FAX 49-71616064444
ITALY 6 distributors
FEBAMETAL S.P.A. MAKINO ITALIA S.R.L. MMC ITALIA SRL

TORINO Cavenago di Brianza MILANO
[email protected] TEL 39-0117701412 TEL 39-0295948290 [email protected] TEL 39-029377031
FAX 39-0117701524 FAX 39-0295948240 FAX 39-0293589093
MMC EMILIA ROMAGNA SRL OSG ITALIA SRL TECNOR MACCHINE SPA
MODENA TORINO MILANO
MR. GIOVANNI FACCHINI TEL 39-0536946687 MR. VINCENZO RAGO TEL 39-0117705211 [email protected] TEL 39-028242851
NETHERLANDS 2 distributors NORWAY 1 distributor
PRODUTEC BV SVM AS NOR-SWISS

MEERKERK VALKENSWAARD OSLO
MR. ANDRE VERBURG TEL 31-183600560 MR. HANS SMITS TEL 31-402040923 MR. JAN EGE TEL 47-23241020
[email protected] FAX 31-183600647 [email protected] FAX 31-402047968 [email protected] FAX 47-23241021
POLAND 3 distributors
Aura Frästechnik GMBH MB Michał Rzepka MMC HARDMETAL POLAND Sp. z o.o.
OBORNIKI WROCLAW
MR. KRZYSZTOF KOSLA TEL 48-666011225 MR. BARTOSZ RZEPKA TEL 48-504647666 MR. BOGUMIŁ ŁOZOWICKI TEL 48-655467284
PORTUGAL 2 distributors ROMANIA 1 distributor
AMTOOLS SIMPLEFER-COMERCIO DE FERRAMENTAS, LDA. MAZAROM IMPEX SRL

MARINHA GRANDE MARINHA GRANDE BUCHAREST
[email protected] TEL 351-244560456 MR. CARLOS ALVES TEL 351-244575350 MR. ADRIAN TOTU TEL 40-212328001
FAX 351-244560668 [email protected] FAX 351-244575359 [email protected] FAX 40-212328002
RUSSIA 2 distributors SWITZERLAND 1 distributors
SodicoM-Center SOLDREAM SPB STREULI TECHNOLOGIES AG

MOSCOW SAINT-PETERSBURG BIRMENSDORF
[email protected] TEL 7-4957870970 [email protected] TEL 7-8123737456 MR. STREULI TEL 41-17394070
[email protected] FAX 41-17394077
SLOVAKIA 2 distributors SWEDEN 2 distributor
MAKINO S.R.O. OSG OSG SCANDINAVIA A/S

BRATISLAVA BRATISLAVA ROSKILDE
TEL 421-249612100 MR. KENSUKE HIKOSAKA TEL 421-911775678 [email protected] TEL 45-46756555
FAX 421-249612400 [email protected] FAX 421-249612400 FAX 45-46756700
SLOVENIA 2 distributors RAVEMA AB

VARNAMO
BTS COMPANY d.o.o. MJM Maruša Brinovec s.p. MR. ROGER HOGLUND TEL 46-37048800
LJUBLJANA Litija [email protected] FAX 46-37049064
MR. BORIS POZAR TEL 386-15841400 MR. METOD PETRIC TEL 386-31335760
[email protected] FAX 386-15249224 [email protected]
132 1709
SPAIN 3 distributors
DELFIN COMPONENTES S.L. JANA TOOLS SL UTILTALL S.A.

VIZCAYA SONDIKA BARCELONA
MR. JON AZCUE TEL 34-944105544 MR. JUAN JOSE JORDE TEL 34-944538224 [email protected] TEL 34-934984465
TURKEY 3 distributors
FORM TEKNIK TANDEM TAKIM TEZGAHLARI TEKNIKA HIRDAVAT SANAVI VE TICARET LTD. STL.
ISTANBUL ISTANBUL ISTANBUL
MR. ISMAIL CINAR TEL 90-2122973397 MR. TANKUT KOCAK TEL 90-2163131413 MR. MEHMET AKKAYA TEL 90-2126742864
UK 4 distributors
MATSUURA MACHINERY LTD MMC HARDMETAL U.K. LTD OSG UK LTD.

LEICESTERSHIRE TAMWORTH ESSEX
MR. DAVID SPENCER TEL 44-1530511400 MR. ADRIAN BARNACLE TEL 44-1827312312 [email protected] TEL 44-8453051066
KYOCERA SGS PRECISION TOOLS EUROPE LTD.

BERKSHIRE
[email protected] TEL 44-1189795200
FAX 44-1189795295
< North America>
U.S.A 9 distributors
MITSUBISHI MATERIALS USA CORP. ON TARGET TOOLING LLC OSG TAP & DIE, INC.
ILLINOIS WISCONSIN ILLINOIS
TECHNICAL SERVICE TEL 1-800-486-2341 MR. SCOTT SHIPPELL TEL 1-847-628-9942 MR. DAN VOLPE TEL 1-630-790-5141
[email protected] FAX 1-847-519-1732 [email protected] FAX 1-847-628-1987 [email protected] FAX 1-630-800-837-3334
SINGLE SOURCE TECHNOLOGIES, INC.

MICHIGAN ILLINOIS WISCONSIN
MR. RICK GRABAREK TEL 1-248-232-6268 MR. VICTOR ROVEDO TEL 1-847-340-3781 MR. STEVE KLUG TEL 1-262-212-3825
[email protected] FAX 1-248-232-6261 [email protected] FAX 1-847-468-1271 [email protected] FAX 1-262-574-7551
SOUTH CAROLINA ALABAMA
MS. CARA KELSO TEL 1-704-896-6000 MR. BOB ASH TEL 1-256-301-0040
[email protected] FAX 1-704-896-6002 [email protected] FAX 1-256-301-0059
PRECISION TOOLS SERVICE INC. TECNARA TOOLING SYSTEMS, INC.

INDIANA LOS ANGELES EAST COAST
MR. PAUL SCHNEPP TEL 1-812-342-1234 MR. DAVID TAKAHASHI TEL 1-562-941-2000 MR. MATT GENOVESE TEL 1-203-912-8906
YAMAZEN INC. INC.

ILLINOIS LOS ANGELES INDIANA
MR. RYAN JACOBSON TEL 1-800-228-2969 MR. MARK O’DONNELL TEL 1-800-882-8558 MR. BOBBY WHITE TEL 1-800-882-8558
CONNECTICUT MICHIGAN
MR. JON MORASUTTI TEL 1-800-882-8558 MR. ALBERTO SAENZ TEL 1-800-882-8558
TOMITA USA INC. VEGA TOOL CORP..

OHIO ILLINOIS
TEL 1-614-873-6509 MR. TADASHI KURASHIMA TEL 1-800-228-2969
FAX 1-614-873-6806 [email protected] FAX 1-847-882-9056
CANADA 2 distributors
OSG CANADA LTD. SINGLE SOURCE TECHNOLOGIES, INC.

ONTARIO, Burlington ONTARIO, Windsor ONTARIO, Mississauga
MR. ROB ADKINS TEL 1-905-632-8032 MR. SHAWN LESPERANCE TEL 1-519-737-8999 MR. ROBERT KMIECIK TEL 1-905-565-6886
MEXICO 5 distributors
AHNSA TOOLS s.a. MMC METAL DE MEXICO S.A. DE C.V OSG /ROYCO, S.A. DE C.V.
MONTERREY QUERETARO MEXICO CITY
MR. HORACIO CAMPOS TEL 52-81-8126-1000 MR. GUILLERMO ORTIZ TEL 52-442 192 6800 MR. TOSHITAKA YOSHIZAKI TEL 52-55-51-19-3363
[email protected] FAX 52-81-8126-1001 [email protected] FAX 52-442 221 6134 [email protected] FAX 52-55-51-19-3370
SINGLE SOURCE TECHNOLOGIES, de R.L.de C.V. YAMZEN MEXICANA SA DE CV

QUERETARO MONTERREY LEON
MR. MANUEL RUIZ TEL 52-442-1016000 MS. JUTZILL MANON TEL 52-442-101-6000 MR. GERARDO PLASCENCIA TEL 52-477-3910280
[email protected] FAX 52-442-2531355 [email protected] [email protected] FAX 52-477-3910278
< South America> < Oceania>
BRAZIL 1 distributor New Zealand 2 distributors
OSG FERRAMENTAS DE PRECISAO LTDA. HeadlandMT Ltd TOTAL CNC PRODUCTS

SAN PAULO Auckland AUCKLAND
MR. YUJI KONDA TEL 55-11-6190-0900 TEL 64-2152265 MS. MARGARET WILLIAMS TEL 64-92745890
[email protected] FAX 55-11-6190-0901 [email protected] FAX 64-92745867
133
<East Asia>
CHINA 21 distributors
AUTOFACT MACHINERY LTD. BBPC CO., LTD

亞動機械有限公司上海阪商機床刀具有限公司
DONGGUAN 東莞 SHANGHAI 上海 BEIJIN 北京
MS. LILY GUAN 关星 TEL 86-769-81157228 MR. AMAYAMA 天山 TEL 86-21-6253-1219 MS. CHANG YAOHUA 常耀华 TEL 86-10-6348-5150
[email protected] FAX 86-769-81157229 [email protected] FAX 86-21-6256-3539 [email protected] FAX 86-10-6348-5152
DIJET INDUSTRIAL CO.,LTD. Dongguan Integrity Precision Machinery Co.,Ltd. DONGGUAN YAJIYA Precision machinery Co., Ltd
黛傑工業株式會社东莞市诚晋精密机械有限公司東莞八字屋精密機械有限公司
SHANGHAI 上海 DONGGUAN 東莞 DONGGUAN 東莞
MR. GAO YONGMING 高永明 TEL 86-21-5058-1698 MR. YANG YABIN 楊亞兵 TEL 86-769-82288607 MR. Jason lee 李忠信 TEL 86-769-8530-7420
[email protected] FAX 86-21-5058-1699 [email protected] FAX 86-769-82288609 [email protected] FAX 86-769-8530-7470
Fineness Corporation DONGLI MACHINE CO.,LTD.

匯穎國際貿易(上海)有限公司東立機械有限公司
SHANGHAI 上海 DONGGUAN 東莞 DALIAN 大連
MR. STEVE HU 胡上千/ MR. ROY LU 呂旺勳 TEL 86-21-64282885 MR. ALAN CHEN 陳宏儒 TEL 86-769-82284785 MS. ZHOU PING 周　萍 TEL 86-411-87324719
[email protected] FAX 86-21-64391906 [email protected] FAX 86-769-82284797 [email protected] FAX 86-411-87324721
TIANJIN 天津 CHENGDU 成都
MR. YANG JIAN 楊建 TEL 86-22-87395825 MR. JASON HUANG 黃琳琳 TEL 86-28-83112969
GALAXY PRECISION MACHINERY LTD
[email protected] FAX 86-22-87395827 [email protected] FAX 86-28-8311-2969
佳力精密机械有限公司
HONGKONG 香港
JECO PRECISION LTD. MR. KENNETH NG 吴志良 TEL 852-31505889
捷高精機有限公司 [email protected] FAX 852-23729093
HONGKONG 香港 SHENZHEN 深圳
MS. CATHY WONG 黄玉珍 TEL 852−2428−8328 MR. ERIC CHOW 周弈行 TEL 86-755-6116-2522 JIANZE MACHINERY TECHNOLOGY CO.,LTD
[email protected] FAX 852−2428−3683 [email protected] FAX 86-755-6116-2533 上海建澤機械技術有限公司
SHANGHAI 上海
KUNSHAN KUNQIAO TRADING CO.,LTD. MR. XUE JIANMING 薛建明 TEL 86-21-51557657
坤僑貿易有限公司 [email protected] FAX 86-21-51557668
KUNSHAN 昆山 SHENZHEN 深圳
MR. CHOU TING SHENG 周廷升 TEL 86-512-57507151 MR. GHENG-NAN,YEH 葉正男 TEL 86-755-81786391~2 MAKINO CHINA CO.,LTD.
[email protected] FAX 86-512-57507153 [email protected] FAX 86-755-8178-6670 牧野機床(中國)有限公司
KUNSHAN 昆山
PRO-TECHNIC MACHINERY LTD. RSE (DALIAN) INTERNATIONALTRADING CO LTD MR. LIU HAORAN 劉浩然 TEL 86-512-5777-8000
寶力機械有限公司美立吉（大連）国際貿易有限公司 [email protected] FAX 86-512-5777-9900
HONG KONG 香港 DALIAN
MR. ALDO, S.K. CHEUNG 張四継 TEL 852-2428-2727 MR. LI GANG 李剛剛 TEL 86-411-8750-8552 OSG SHANGHAI
[email protected] FAX 852-2480-4764 [email protected] FAX 86-411-8750-8553 歐士機(上海)精密工具有限公司
SHANGHAI 上海
SONDER TOOLS & MACHINERY(HK)LTD. MS. JI MIN 嵇敏 TEL 86-21-5888-6600
晨達(香港)有限公司 [email protected] FAX 86-21-5888-3300
HONG KONG 香港 DONGGUAN 東莞
MR. JOHNNY NG 吳偉良 TEL 852-2-964-0233 MR. JOHNNY NG 吳偉良 TEL 86-769-22699687 SHANGHAI HERLY INTERNATIONAL TRADING CO.,LTD.
[email protected] FAX 852-2-964-0604 [email protected] FAX 86-769-22699487 上海賀立國際貿易有限公司
SHANGHAI 上海 BEIJIN 北京 SHANGHAI 上海
MR. VICTOR LAU 劉晓炎 TEL 86-21-5109-6048 MS. LILIAN WANG ZHE 王浙 TEL 86-10-5862 2040 MR. YOU JUNHA 由俊哈 TEL 86-21-3921-5609
[email protected] FAX 86-21-5111-3216 [email protected] FAX 86-10-5862 2037 [email protected] FAX 86-21-3921-5606
TOJU MACHINE-ELECTRICITY CO.,LTD TOP CEL INTERNATIONAL TRADING(SHANGHAI)CO.,LTD. SHANGHAI REBAR CUTTINGTOOLS CO., LTD
上海東住機電科技有限公司拓賽爾國際貿易(上海)有限公司上海鋭覇切削工具有限公司
SHANGHAI 上海 SHANGHAI 上海 SHANGHAI 上海
MR. TIAN JUN 田军 TEL 86-21-6413-8038 MR. TOM LEI 雷德耀 TEL 86-21-6441-3330 MR. CUI YANJUN 崔岩軍 TEL 86-21-5108-5980
YAMAZEN CORPORATION SICHENG Electromechanical Technology Co., Ltd

山善(上海)貿易有限公司思誠機電科技有限公司
SHANGHAI 上海 SHENZHEN 深圳 DONGGUAN 東莞
MR. KOZAWA 小澤 TEL 86-21-5445-2266 MR. YASUNO 安野 TEL 86-755-8280-5000 MR. Fly ZHONG　鐘飛泰 TEL 86-769-22186189
[email protected]. FAX 86-21-5445-2066 [email protected] FAX 86-755-8280-5100 [email protected] FAX 86-769-22186191
DALIAN CHONGQING ZHE JIANG RI JIN CNC TOOLS CO., LTD.
MR. ZHUANG 庄震 TEL 86-411-8762-6323 MR. HIROSE 廣瀬 TEL 86-23-8906-1951 浙江日進數控刀具有限公司
[email protected] FAX 86-411-8762-6332 [email protected] FAX 86-23-8906-1953 ZHEJIANG 浙江
GUANGZHOU 广州 TIANJIN 天津 MS. YE LI HONG 叶丽红 TEL 86-576-84232178
MR. YAMASHITA 山下 TEL 86-20-8732-1601 MR. ESHIRO 江城 TEL 86-22-2840-8710 [email protected] FAX 86-576-84115612
TAIWAN 3 distributors
KUNJUNG CORPORATION
TAIPEI 台北 KAOSHUNG 高雄 TAICHUNG 台中

MR.CHUNG-WEI,HUANG 黄崇維 TEL 886-2-22902500 MR. TSUNG-LIEH, HO 何宗烈 TEL 886-7-7231101 MR. MING-CHIEH,YEN 顏明傑 TEL 886-4-27026477
CENTURY TRADING CORPORATION TAIHO TOOL MFG. CO.,LTD.

世紀貿易股份有限公司
TAIPEI 台北 KAOSHUNG 高雄
MR. YAN YUNGTA 顔永達 TEL 886-2-2298-8336 [email protected] TEL 886-7-621-6136
[email protected] FAX 886-2-2298-8338 FAX 886-7-621-6140
134
KOREA 9 distributors
KUK SUNG INTERNATIONAL CO.,LTD. DOO REE TRADING CO.,LTD. IGPNET CO.,LTD.
국성인터내셔널주식회사 (유)두리무역 주식회사 아이지피넷
DAEGU 대구 CHANGWON 창원 SEOUL 서울
MR. CHOI BYUNG HOON 최병훈 TEL 82-53-604-0521 MR. J.K. CHO 조재관 TEL 82-55-286-5310 MR. KIM MOON KI 김문기 TEL 82-2-2026-5100
KAMI CO.,LTD. MIRAE TECHNO NS KOREA

미래테크노 앤에스코리아
SEOUL 서울 GWANGMYEONG 광명 ANYANG 안양
MR. YOUNG L. , KIM, PH. D. 김영립 TEL 82-2-6670-4114 MR. PARK HO SUNG 박호성 TEL 82-31-479-5301 MR. BAI JAMES 배성진 TEL 82-31-479-1207
OSG KOREA CORPORATION SEJONG M.T YAMAZEN (KOREA) LTD.

한국OSG주식회사 세종엠티 (주)야마젠코리아
DAEGU 대구 BUSAN 부산 SEOUL 서울
MR. JANG JUN YOUNG 장준영 TEL 82-53-589-2054 MR. KANG YOUNG JIN 강영진 TEL 82-51-313-1148 MR. KIM SUNG JONG 김성종 TEL 82-2-864-1755
<South Asia>
INDIA 7 distributors
MAKINO INDIA PVT LTD.

BANGALORE Delhi Pune
MR. B.V. SRIDHAR TEL 91-8067419500 MR. SHASHANK TOMAR TEL 91-1244652200 [email protected] TEL 91-2138673600
ASSOCIATED ENGINEERING SERVICES CO.,LTD. MMC HARDMETAL INDIA PVT. LTD. Orion Innotech Pvt. Limited
CHENNAI BANGALORE GURGAON
MR. N MURALI TEL 91-4423821581 [email protected] TEL 91-802308-3400 MR. VISHAL VERMA TEL 91-1244225210
[email protected] FAX 91-4423821584 [email protected] FAX 91-1244225211
OSG (INDIA) PVT. LTD. VALIANT INDIA Yamazen Machinery & Tools India Pvt. Ltd.
GURGAON PUNE Bangalore / Chennai / Gurgaon / Pune
TEL 91-1244009737 MR. VIRENDRA MAYNALE TEL 91-9371672785 [email protected] TEL 91-1244605900
FAX 91-1244207761 [email protected] FAX 91-1244605921
INDONESIA 4 distributors PHILIPPINES 2 distributors
PT. JAVATEC TRIMITRA UTAMA PT. JAVATEC TRIMITRA MACHINERY YAMAZEN MACHINERY & TOOLS PHILIPPINES, INC.
JAKARTA JAKARTA LAGUNA
MR. STEFANUS DIBYO TEL 62-21-458-77288 MR. JONATAN ARIF SANTOSO TEL 62-21-4584-9988 MR. SHIN ISHIDA TEL 63-49-543-1958
PT. RUKUN SEJAHTERA TEKNIK PT. YAMAZEN INDONESIA KAMOGAWA LAGUNA PHILIPPINES.INC
JAKARTA JAKARTA LAGUNA
MR. HERI RISWANTO TEL 62-21-628-1615 MR. MASASHI HAGIHARA TEL 62-21-451-3345 MR. TAKAHIRO FUNAKUBO TEL 63-49-576-4931
SINGAPORE 5 distributors
A-TECH MARKETING PTE LTD MAKINO ASIA PTE LTD. NOBELTECH PTE LTD
MR. IAN SOH TEL 65-6773-3148 MR. V.M KUMAR TEL 65-6861-5722 MR. ERIC CHAN TEL 65-6749-3636
OSG ASIA PTE LTD. YAMAZEN (SINGAPORE)PTE LTD.

MR. KAZUMASA KOIKE TEL 65-6844-4350 MR. TAKURO MATSUI TEL 65-6276-9488
[email protected] FAX 65-6844-4351 [email protected] FAX 65-6276-9688
THAILAND 5 distributors
FACTORY MAX CO.,LTD. MAKINO (THAILAND) CO.,LTD. OSG (THAILAND) CO.,LTD.

BANGKOK BANGKOK BANGKOK
MR. S. TANGTARATORN TEL 66-2-759-9100 MR. JUNYA YOSHIMURA TEL 66-2-971-5750 MR. MASAKAZU SEIKE TEL 66-3-898-9035
PRECISION TOOLS SERVICE (THAILAND) CO.,LTD. YAMAZEN (THAILAND) CO.,LTD.

BANGKOK BANGKOK
MR. YOSHIAKI KATO TEL 66-2-308-2470 MR. KENICHI YASUNO TEL 66-2-374-5522 MALAYSIA 2 distributors
NEWLINE MACHINE TOOL SDN.BHD.
VIETNAM 2 distributors KUALA LUMPUR
MR. JEFFREY P.W CHOON TEL 60-3-8961-1973
KAMOGAWA VIETNAM CO.,LTD [email protected] FAX 60-3-8961-1971
Hanoi Ho Chi Minh
MR. TOMOHIRO YAMAMOTO TEL 84-24-378-550-22/23 MR. SHINJI KUSUMOTO TEL 84-28-391-054/77/78/79 YAMAZEN (MALAYSIA) SDN.BHD.
[email protected] FAX 84-24-378-550-23 [email protected] FAX 84-28-3910-5480 KUALA LUMPUR
MR. AKIRA KATO TEL 60-3-5569-5099
YAMAZEN VIETNAM CO.,LTD [email protected] FAX 60-3-5569-5011
Hanoi Ho Chi Minh PENANG
MR. DAISUKE TOCHIGI TEL 84-4-3728 6292 MR. TAKEHITO NAKAJIMA TEL 84-8-54179 229 MR. CHENG TEL 60-4-399-4021
135

MST Tooling System Vol 3 - Catalog

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MST Tooling System Vol 3 - Catalog

Uploaded by

Copyright:

Available Formats

Individuality and creation

■ Fusing humans and machines

We make graphite elec-

SLIMLINE UNO finishing process

We meet our customers'

If you would like more detailed

The shrink-fit Short cutter life.

The applicable The coolant

DETa-1 Collet Holder 22

FMH RIGID type 46

RED SCREW arbor 48

SET SCREW HOLDER

General Purpose Tool SMART GRIP 77

TOOL SET UP STATION

Tool set up stand 100

Maintenance Tool MIDDLE VISE 105

WIRE CUT UNIT 107

Angle head HALF

HSK Shank 125

1 The shortest 3 Quality

Tool holder Length becomes 2 times Replace!

Use shrink-fit holders 4 Cleanliness

Ideal for easy machine

3μm (.0001”) 1.5mm (.06”)

Custom-made products Extra long type

800 Slim and extended type

Drilling and tapping account for 80% of angle head operation.

Speedy Light- Repair it

Compact d esign Auto Tool Changer ( A. T. C) is Easy installation

Can be used with a variety of machining centers.

Straight pin Taper pin

Running cost is reduced by 90% as a result of reduced

Positioning block and positioning pin

HSK-T Tooling Systems

for Turning Mill

Semi-finished Positioning block for machines

CODE ROBODRILL CODE SPEEDIO CODE NOTE

DETa-1 Collet D12ー4, 6, 8, 10, 12, 13 (each 1pc.)

Positioning pin HPー50T(1pc.) HPー62T(1pc.)

Fig. 2 4,000 min -1 Fig. 4 6,000 min -1 Fig. 6 4,000 min -1

CCW CCW CCW

DETa-1 Collet Tap sleev e 64

TA12ーM14 M14 111.5 25 33 HFT12 (φD=6 〜10 )

BT30ーHFD 7 ー122 1 1 〜 7 122 70 2.3 DN40AーHFD 7ー135 1 1 〜 7 135 70 3.1

ー182 182 130 3.0 ーHFT 4ー135 5 M2〜M 8 135 70 3.1

HSK-T Tooling Systems

for Turning Mill

6 M3〜M12 5.31” 2.75” 12.8

●Retention knob→P.67 ●Tools for assembly

Drill・End mill Tap

Fig. 1 Fig. 2 Fig. 4 6,250 min -1

39 42.2 3.5 43 42.5

Fig. 3 6,300 min -1 Fig. 5 6,300 min -1

BT30 ーHUD 7ー102 1 1 〜 7 102 39 46 64 1.8 116

HSK-T Tooling Systems

for Turning Mill

■A product code example when ordering.

Positioning pin type

A cutting tool can be mounted both ways,

CW L1 Allows maximum tool Minimal interfer-

31 system for Shrink-

BT30 ーHFCS6ー155 155 50 100 1.8 ■O ption

■ Fusing humans and machines　　　

Compact d esign 　　 Auto Tool Changer ( A. T. C) is Easy installation

BT30ーHFD 7 ー122 1 1 〜 7 122 70 2.3 DN40AーHFD 7ー135 1 1 〜　 7 135 70 3.1

BT30 ーHUD 7ー102 1 1 〜　 7 102 39 46 64 1.8 116

BT30　ーHFCS6ー155 155 50 100 1.8 ■O ption

　ー205 205 95 155 3.0 ■Std . Access.

T. 　ー220 φ3, 4, 6 8.66" 3.74" 6.10" 7.28

　ー220 M4, 5, 6 8.66" 3.74" 6.10" 11.68