Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

MB15(W) / 25(W) / 35(W)

HIGH CURRENT SILICON BRIDGE RECTIFIER

NOT RECOMMENDED FOR NEW DESIGN, USE


Features GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES
MB
· High Conductivity H
· Metal Case
· Superior Thermal Design B
E
· Terminals Solderable per MIL-STD-202, Method 208 Dim Min Max
· Universal Terminals; Snap-on, Solder or P.C. Board Mounting A 28.40 28.70
· Lead Free Finish, RoHS Compliant (Date Code 0514+) B 10.97 11.23
(Note 2) A
C H
C 15.50 17.60
E 22.86 25.40
Mechanical Data (AC)
G 13.30 15.30
· Terminals: 0.25" Faston Terminals J
(+)
C A
H Hole for #10 screw
· Case material - UL Flammability Rating Classification 94V-0 (-) (AC)

· Moisture sensitivity: Level 1 per J-STD-020C 4.85Æ 5.59Æ

· Approx Weight: 29 grams G


J 17.10 19.10
· Mounting Position: Bolt Down on Heat-sink with Silicone MB-W
K 10.40 12.40
Thermal Compound Between Bridge and Mounting Surface for L 0.97Æ
H 1.07Æ
Maximum Heat Transfer Efficiency Nominal
· Mounting Torque: 20 in. lb. Max. N M 30.50 ¾
· Polarity: Polarity Symbols Marked on Case M
N 10.97 11.23
L P 17.10 19.10

A
P H
(AC)
(+)

P K A

(-) (AC)

Maximum Ratings and Electrical Characteristics


Rating at 25°C ambient temperature unless otherwise specified. Suffix “W” denotes wire leads

Characteristic Symbol -05 -1 -2 -4 -6 -8 -10 Units


Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average MB15 15.0
Rectified Output Current MB25 25.0 A
I(AV)
@ TC = 55°C MB35 35.0
Peak Forward Surge Current Single MB15 300
Half Sine-Wave Superimposed on MB25 IFSM 300 A
Rated Load MB35 400
Maximum Instantaneous @ 7.5A MB15 1.1
Forward Voltage Drop per @12.5A MB25 VF 1.1 V
Rated Load @17.5A MB35 1.2
Maximum Reverse DC current at Rated @TA = 25°C IR 10 µA
DC Blocking Voltage (per Element) @TA = 100°C 1.0 mA
I2t rating for fusing (8.3ms) MB15 373
MB25
I2 t 373 A2 s
MB35 664
Typical Thermal Resistance (Note 1) RqJC 2.5 °C/W
Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C

Notes: 1. Thermal Resistance from junction to case


2. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex
Notes 5 and 7.
DS21303 Rev. 7 - 3 1 of 4 MB15(W)/25(W)/35(W)
www.diodes.com ã Diodes Incorporated
40 40
AVERAGE OUTPUT CURRENT (AMPERES)

AVERAGE FORWARD OUTPUT CURRENT


23 X 9 X 11.8 cm Wing Plate
MB35
35 MB35
35
RthS-A = 0.5ºC/W

30 30
MB25
25 25

(AMPERES)
20 MB25 20
RthS-A = 0.5ºC/W
MB15
15 15

MB15
10 RthS-A = 1.0ºC/W 10

5 5
60 Hz Resistive or Inductive
60Hz Resistive or Inductive Load
0 0
0 20 40 60 80 100 0 50 100 150 200
AMBIENT TEMPERATURE (ºC) CASE TEMPERATURE (ºC)
Fig. 1 Maximum Output Rectified Current Fig. 2 Maximum Output Rectified Current

PEAK FORWARD SURGE CURRENT (AMPERES)


INSTANTANEOUS REVERSE CURRENT (mA)

10 500

TC = 100ºC

400

1.0
300
MB35

200
0.1
MB25, MB15
100
TA = 25ºC

0.01
0 20 40 60 80 100 120 140 0
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 1.0 10 100
Fig. 3 Typical Reverse Characteristics NUMBER OF CYCLES AT 60 Hz
Fig. 4 Maximum Non-Repetitive Peak Forward
Surge current

NOT RECOMMENDED FOR NEW DESIGN, USE


GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES

DS21303 Rev. 7 - 3 2 of 4 MB15(W)/25(W)/35(W)


www.diodes.com
Ordering Information (Note 3)

Device Packaging Shipping


MB1505 MB 100/Bulk
MB151 MB 100/Bulk
MB152 MB 100/Bulk
MB154 MB 100/Bulk
MB156 MB 100/Bulk
MB158 MB 100/Bulk
MB1510 MB 100/Bulk
MB1505W MB-W 100/Bulk
MB151W MB-W 100/Bulk
MB152W MB-W 100/Bulk
MB154W MB-W 100/Bulk
MB156W MB-W 100/Bulk
MB158W MB-W 100/Bulk
MB1510W MB-W 100/Bulk
MB2505 MB 100/Bulk
MB251 MB 100/Bulk
MB252 MB 100/Bulk
MB254 MB 100/Bulk
MB256 MB 100/Bulk
MB258 MB 100/Bulk
MB2510 MB 100/Bulk
MB2505W MB-W 100/Bulk
MB251W MB-W 100/Bulk
MB252W MB-W 100/Bulk
MB254W MB-W 100/Bulk
MB256W MB-W 100/Bulk
MB258W MB-W 100/Bulk
MB2510W MB-W 100/Bulk
MB3505 MB 100/Bulk
MB351 MB 100/Bulk
MB352 MB 100/Bulk
MB354 MB 100/Bulk
MB356 MB 100/Bulk
MB358 MB 100/Bulk
MB3510 MB 100/Bulk
MB3505W MB-W 100/Bulk
MB351W MB-W 100/Bulk
MB352W MB-W 100/Bulk
MB354W MB-W 100/Bulk
MB356W MB-W 100/Bulk
MB358W MB-W 100/Bulk
MB3510W MB-W 100/Bulk

Notes: 3 . For packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf

DS21303 Rev. 7 - 3 3 of 4 MB15(W)/25(W)/35(W)


www.diodes.com
IMPORTANT NOTICE

Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhance-
ments, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein;
neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such
use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.

LIFE SUPPORT

The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the
component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated.

NOT RECOMMENDED FOR NEW DESIGN, USE


GBPC15 SERIES, GBPC25 SERIES, OR GBPC35 SERIES

DS21303 Rev. 7 - 3 4 of 4 MB15(W)/25(W)/35(W)


www.diodes.com

You might also like