06 Isaac
06 Isaac
EASY TO
Heroes of Faith
BUILD PAPER
CRAFT
I saa c
B i b le
M i n i Wo r l d
Old
Testament
General Assembly Instructions
TOOLS • Sharp scissors.
NEEDED
• Paper-cutting knife (recommended: X-Acto knife with a #11 blade).
• Sturdy tweezers with smooth edges. (Tweezers with rough edges or teeth
will mar the surface of the pieces.)
• Metal ruler to make a straight cut or score.
glue • Toothpicks for reaching into tiny corners and spreading drops of glue.
• White glue and glue stick.
• Cutting surface (recommended: a cutting mat).
• Dry pen (no ink) or blunt knife for scoring.
• Print pages 8 to 10 on White Card Stock paper (sometimes called Cover Paper or
Bristol), 160 grammes (recommended) or 190-200 grammes (110 lbs) preferably non
glossy but with a mat finish.
Cutting
Usually, a piece for a card stock model is cut out in two stages.
First, the piece is separated from the rest of the pieces by cutting roughly around it with scissors.
Don’t cut along the lines at this step.
Once the piece is separated, you can work on it without damaging other pieces. It’s best to do
the scoring and folding before proceeding to the fine cutting.
Work on one piece at a time:
• Score along the dotted lines.
• Cut along the solid lines.
• Fold along the dotted lines, but don’t add glue to any pieces yet.
VERY IMPORTANT: Try out the pieces to be glued before applying the glue. This will
help you understand how the pieces fit together, and you will be able to take note of
any adjustments that might be needed. Then apply a small amount of glue on the tab
indicated by a black dot.
Scoring
There are two kinds of folds:
Score the fold lines to make a crisp straight fold. It’s
Mountain especially important for the smallest pieces to be
fold scored before folding. To score, place a metal ruler
along the fold line, and then press with a dull point (a
dry pen or dull knife) along the fold line to compress
Valley the paper. This will help to achieve a crisp fold.
fold
Most pieces on the model require a mountain fold,
Mountain fold generally though a few use a valley fold. Valley folds will be
means that the texture is on the indicated on the model pieces with the valley fold
outside, while on a valley fold symbol.
the texture is usually inside.
www.mylittlehouse.org
Copyright © 2022 by Didier Martin. All rights reserved. No parts of this product may be reproduced in any form, by any
electronic or mechanical means without permission in writing from the author.
Heroes of Faith - Isaac - page 2
Follow the steps for assembling described in the following pages. Some parts
may seem to be complex, but none are complicated to assemble. Simply create
one part at a time while following the order of assembly, and always try out the
pieces first without glue to understand how they fit together.
Look at the final photos and the different illustrations, and with patience you will
be able to create a great model.
Use a toothpick to apply a small drop of glue and a tweezer to hold the small
pieces. There are a few tips added to the instructions to help you along the way.
An important key for a well-assembled model is to score neatly every piece along
the dotted line, then to prefold everything before gluing.
And remember,
there is no hurry.
TAKE YOUR
TIME!
Optional:
Before gluing the
bottom piece, glue
in a small coin to
add weight to the
mini-people.
Floor tile
Heroes of Faith
Isaa
c