Professional Documents
Culture Documents
Iec TR 62278-3-2010
Iec TR 62278-3-2010
®
Edition 1.0 2010-04
TECHNICAL
REPORT
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
colour
inside
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Switzerland
Email: [email protected]
Web: www.iec.ch
TECHNICAL
REPORT
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
colour
inside
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION PRICE CODE
XB
ICS 45.060 ISBN 978-2-88910-660-8
CONTENTS
FOREWORD...........................................................................................................................4
INTRODUCTION.....................................................................................................................6
1 Scope ...............................................................................................................................7
2 Terms and definitions .......................................................................................................8
3 Approach adopted for the guide........................................................................................8
3.1 General ...................................................................................................................8
3.2 Entities involved in the life cycle phases of rolling stock ..........................................8
4 Application of this guide ...................................................................................................8
4.1 Object of the application ..........................................................................................8
4.2 Application of IEC 62278 .........................................................................................9
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
4.2.1 Assessment of the application of IEC 62278 ................................................9
4.2.2 Mandatory requirements for the application of IEC 62278 ............................9
5 Specifying RAM requirements......................................................................................... 10
5.1 Introductory remarks ............................................................................................. 10
5.2 Preliminary RAM analysis ...................................................................................... 10
5.2.1 General ..................................................................................................... 10
5.2.2 Preliminary RAM analysis activities ........................................................... 11
5.3 RAM requirements................................................................................................. 17
5.3.1 General ..................................................................................................... 17
5.3.2 Reliability targets ....................................................................................... 17
5.3.3 Maintainability targets................................................................................ 18
5.3.4 Availability targets ..................................................................................... 22
5.4 Process for choosing RAM figures ......................................................................... 25
5.5 RAM programme ................................................................................................... 25
5.5.1 General ..................................................................................................... 25
5.5.2 Configuration management system ............................................................ 26
5.5.3 RAM programme outline ............................................................................ 27
5.5.4 Example of RAM analyses document template and data ............................ 28
6 RAM assurance during life cycle..................................................................................... 42
6.1 RAM programme and phases of the life cycle ........................................................ 42
6.1.1 General ..................................................................................................... 42
6.1.2 Tender phase ............................................................................................ 43
6.1.3 Design phase ............................................................................................ 44
6.1.4 Demonstration phase................................................................................. 47
7 RAM parameters to be incorporated into LCC model ...................................................... 50
7.1 General ................................................................................................................. 50
7.2 Overview of LCC modelling ................................................................................... 51
7.3 RAM parameters for LCC ...................................................................................... 51
Annex A (informative) Examples of breakdown structure ...................................................... 53
Bibliography.......................................................................................................................... 66
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Figure A.4 – Example of structure using the tree breakdown chart for an EMU
(Electrical Multiple Unit) coach.............................................................................................. 63
RAILWAY APPLICATIONS –
SPECIFICATION AND DEMONSTRATION OF RELIABILITY,
AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) –
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62278-3, which is a technical report, has been prepared by IEC technical committee 9:
Electrical equipment and systems for railways.
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
–6– TR 62278-3 © IEC:2010(E)
INTRODUCTION
IEC 62278 is likely to enhance the general understanding of the issues involved in achieving
RAMS characteristics within the railway field. It defines a comprehensive set of tasks for the
different phases of a generic life cycle for a total rail system. Although some of the examples
given in the annexes of IEC 62278 are for rolling stock, the standard is essentially aimed as a
top level railway system document.
RAMS characteristics for rolling stock (i.e. its long-term operating behaviour performance), as
for any other system, form an important part of its overall performance characteristics. But the
consideration of RAMS, in contractual terms, between a customer / operator and a main
supplier for the procurement of rolling stock has been problematic. Also, in rolling stock
contracts, there is now a greater emphasis on the impact on end customers of service failures
and on the economic and risk considerations of RAMS (i.e. the business perspective).
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Consequently, Life Cycle Cost is being used as a measure of satisfying customer needs and
providing a wider perspective of RAMS importance in terms of the business economics.
Life cycle cost approach represents a holistic, total cost of ownership philosophy for
addressing economic considerations. The contribution of RAMS to the LCC (Life Cycle Cost)
of rolling stock could be used to allow economic considerations to be addressed.
This application guide focuses mainly on the tasks and issues from procurement, engineering
and maintenance, from the tender to the operation/maintenance phase, and is intended to
help in establishing a common approach for capturing the different, time dependant,
performance requirements of rolling stock from an operator/business perspective.
IEC 62278 is a standard, which treats the overall aspects of RAMS in railway applications.
This guide deals with the application of RAM part of IEC 62278 to rolling stock only, as stated
in the scope and clarifies areas where IEC 62278 could be misinterpreted.
TR 62278-3 © IEC:2010(E) –7–
RAILWAY APPLICATIONS –
SPECIFICATION AND DEMONSTRATION OF RELIABILITY,
AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) –
1 Scope
This part of IEC 62278 provides guidance on applying the RAM requirements in IEC 62278 to
rolling stock and for dealing with RAM activities during the system life cycle phases from
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
invitation to tender to demonstration in operation only. All references to IEC 62278 concern
the 2002 issue.
The guide is aimed at the customers/operators and main suppliers of rolling stock. The main
purpose of the guide is to:
Regarding LCC, this application guide is restricted to providing only the key RAM parameters
necessary to be incorporated into an LCC model.
• RAM values connected to the different RAM requirements (however, it contains a simple
guideline of actions for supporting the decision making process and choosing appropriate
values, see 5.4);
• specific RAM documents to be produced and activities to be performed. However, it
provides, only as an example, typical data and document templates for recording the
output of a RAM analysis).
–8– TR 62278-3 © IEC:2010(E)
For the purposes of this document, the terms and definitions given in IEC 62278 and the
following apply:
2.1
part number
the alphanumeric code, generally assigned by the main supplier, to represent a family of
items with the same characteristics of form, fit and function
3.1 General
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
The approach adopted is to raise the following questions, for each phase of the Life Cycle, in
order to successively set up the requirements of IEC 62278 and the basis for satisfying them:
• WHAT: what activities / tasks are to be performed and the supporting documents to be
produced?
• WHO: who has the responsibility for these activities / tasks?
• HOW: which type of method or tool should be used?
This process is adopted for the development of the guide and should be applied in
accordance with the structure of the application guide.
Depending on the organisational and management structure of the railway system concerned,
a number of entities, performing different functions, may be involved within the life cycle
phases of rolling stock. For the purpose of guidance on contractual relations, the entities are
divided into 2 main categories, i.e. customer and supplier.
It is therefore advisable, to identify all the entities that can be a part of this relationship and to
examine how the responsibilities of dealing with these entities are shared between the
customer and supplier relationship. Table 1 gives some typical examples only.
Supplier Customer
Entity
responsibility responsibility
Main supplier of the rolling stock X
Sub-supplier of the rolling stock X
Operator of the rolling stock X
Owner of the rolling stock X
Maintainer of the rolling stock X X
This guide is applicable to rolling stock (train, coach, locomotive, etc.) and to all the
subsystems, assemblies and parts belonging to the rolling stock, according to their boundary
limits.
TR 62278-3 © IEC:2010(E) –9–
Referring to 1.2 of IEC 62278, the guide is for use by Railway Authorities and the railway
support industry and is applicable to:
For use in this document only, the above two bullet point items should be referred to by the
generic term “system”, comprising the complete sequence “system, sub-system, component”
of a rolling stock or the whole rolling stock itself breakdown structure.
Referring to 5.3 of IEC 62278 and taking into account the responsibilities of the different
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
entities involved in the life cycle phases, the following subclause gives a synthesis of the main
actions required to meet the requirements.
According to 5.3.2 of IEC 62278, the assessment of the application of the requirements of
IEC 62278 to rolling stock (system under consideration) shall be defined by the Railway
Authority and according to 5.3.4 of IEC 62278, the assessment shall:
Both the customer and the main supplier should provide documented evidence for the above
specifications and justifications that are within their responsibility.
Where main supplier introduces limitations, they should be discussed and agreed with the
customer.
The following is a synthesis of the mandatory requirements in 5.3.5 of IEC 62278 regarding
RAM only:
• define and agree the responsibilities for carrying out all RAM tasks within each phase
chosen;
• ensure the competence of the personnel involved within RAM tasks;
• establish and implement a RAM programme, where the following should be identified and
managed:
– 10 – TR 62278-3 © IEC:2010(E)
Both the customer and the main supplier should provide evidence by documents about the
fulfilment of these mandatory requirements, within their responsibility.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
5 Specifying RAM requirements
The purpose of this clause is to establish the process to define RAM requirements for rolling
stock and for all the subsystems, assemblies and parts belonging to the rolling stock
according to its boundary limits.
This clause gives detailed information on phases 1, 2, 4 and 5 of system life cycle
requirements described in 6.1, 6.2, 6.4 and 6.5 of IEC 62278.
To start with, as part of the system definition process, all available data and relevant
information about the rolling stock under consideration should be collected.
The final goal is the derivation of RAM targets through the appropriate analysis of all the
information collected and organised in a structured way.
5.2.1 General
This subclause complements 6.1.3.4, 6.2.3.1, 6.2.3.2, 6.4.3.1 and Clause A.2 of IEC 62278
and gives further details.
The purpose of the preliminary RAM analysis is to identify the application environment and
the operating conditions of the rolling stock, in order to recognise the fundamental concepts
for basing the overall RAM requirements.
Deliverables of the preliminary RAM-related activities constitute the necessary background for
defining the overall RAM requirements specification in terms of:
TR 62278-3 © IEC:2010(E) – 11 –
– RAM requirements.
– Demonstration and acceptance criteria.
– RAM programme requirements.
5.2.2.1 General
• System identification: where the rolling stock has to be identified in terms of its boundary
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
limits, operational conditions, functions, interfaces, system breakdown structure, logistics
and maintenance conditions.
• Failure conditions: where the failures of the rolling stock have to be identified and
categorised in order to define appropriate requirements.
This subclause provides a general overview of the main features identifying a rolling stock
(see IEC 62278, Clause A.2).
The identification process is carried out to gain assurance that the rolling stock is correctly
analysed and all the factors influencing its RAM performance have been identified.
These characteristics define the conditions under which the rolling stock is required to
accomplish its mission and constitute the reference conditions for:
The main characteristics and features necessary to describe a rolling stock are its mission
profile, route profile, operating conditions, environmental conditions and maintenance
conditions (including logistics). Items contained in each of these are listed below:
a) Mission profile:
• Reference route,
• Commercial speed (mission duration / mission length),
• Mean length of a run,
• Mean distance between train stops,
• Operating time or distance per year,
• Revenue operating time or distance per year,
• Stand-by time per day,
• Idle time per day (i.e. time when the rolling stock is neither in operation nor stand-by),
• Planned total time of use (life expectancy in years).
b) Route profile:
• Number of tunnels related to reference route,
• Number of viaducts related to reference route,
• Cumulative distance in tunnels,
– 12 – TR 62278-3 © IEC:2010(E)
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Time of presence of catenary power, for each voltage,
• Time during which a trainset is awake (i.e. in operation or standby),
• Operating time for Heating Ventilation and Air Conditioning, in heating mode and in air
conditioning mode,
• Average speed and maximum speed,
• Potential use in multiple units,
• Total time of coupled operation,
• Frequency of coupling and de-coupling,
• Internal temperature range of the rolling stock,
• Mechanical (shock and vibration),
• Electrical (power supplies),
• Electromagnetic compatibility (e.g. EMC – train to train or system to system),
• Signalling interfaces (e.g. on-board and way-side),
• Ergonomics.
d) Environmental conditions:
• Outside air temperatures (OAT),
• Maximum height above the sea level,
• Solar radiation,
• Humidity,
• Wind and pressure pulses,
• Water and precipitation,
• Pollutants and contaminants,
• Resistance to corrosion.
e) Maintenance conditions:
• Indicative maintenance plan (i.e. minimum preventive maintenance interval, maximum
contemporary number of personnel required for maintenance interval tasks, maximum
standstill time to complete maintenance interval tasks, etc.),
• Number, location and description of the sites for maintenance,
• Description of the standard equipment, tools and resources at the maintenance sites.
TR 62278-3 © IEC:2010(E) – 13 –
5.2.2.3.1 General
Breakdown structure of the rolling stock is the most important baseline of the identification
process. Establishing a breakdown structure of the rolling stock, gives a clear reference
outline for all the activities and analyses for supporting RAM programme through the life
cycle.
Generally, the scope of the breakdown structure is to set up the borders of a system by listing
all the items belonging to that system and, by using an appropriate number of discrete
breakdown levels for the system, to draw out the relationships existing between the different
items of the rolling stock.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Functional breakdown structure,
• Physical breakdown structure.
The functional breakdown is used to perform preliminary criticality analyses. The last
functional level allows consequences of functional failure modes to be developed and the next
physical level allows the critical item list to be developed.
The physical breakdown is used to perform maintainability analyses. The last level of this
breakdown is the LRU (Line Replaceable Unit), as defined in 5.5.4.4. This breakdown is
sometimes called the logistic breakdown structure.
For setting up a breakdown structure, a decomposition process is carried out starting from the
first level to the other levels identified and being able to represent all the items and their
functional relationships.
At each level identified in the hierarchy, every system identified becomes the next system
under consideration and can be further decomposed into lower levels, as necessary.
There are several methods and tools to set up a breakdown structure. The following are
recommendations to be followed in order to develop an appropriate and suitable breakdown
structure for RAM purposes:
• Avoid the use of "large number of levels" and limit these to a reasonable number (three or
four are suggested),
• Last item identified along a branch shall be a LRU,
• Force the use of the same terms and definitions for identical items,
• Ensure that the terms and definitions used for every item are the same in all the design
documents (drawings, outlines, diagrams, specifications, etc.),
• After the first issue of the structure avoid continuous modifications,
• Avoid the use of vague or unclear definitions.
Every breakdown structure shall be presented together with a set of drawings, diagrams, and
functional outlines in order to meet the target of identifying the rolling stock and all its
subsystems, assemblies and parts, clarifying at least:
A minimum set of data is used to represent and to manage the breakdown structure.
This kind of data is the baseline of the different analyses that should be carried out during the
life cycle.
Every breakdown structure should be represented with a header containing at least the following
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
(see Table 2):
Table 2 – Example of minimum set of data of the header for a form representing
a breakdown structure
Subject Details
The following (see Table 3) are the minimum set of data to represent a breakdown structure:
Subject Details
NOTE 1 The use of quantity information is suggested for breakdown structure where the product is defined.
NOTE 2 As appropriate, it is recommended to use the Part Number for every item of the breakdown structure.
This subclause complements 4.5.2.2 and 6.4.3.2 of IEC 62278 and gives further details.
The following general failure conditions are defined for the rolling stock based on general
failure categories, which may be experienced by a generic railway transport:
• Immobilising failures,
• Service failures,
TR 62278-3 © IEC:2010(E) – 15 –
• Minor failures.
Table 4 shows the failure categories indicated in IEC 62278 and defines them in terms of their
application to rolling stock.
A failure that:
Significant – prevents train movement or causes a delay to service greater than a specified
(Immobilising failure) time and/or
– generates a cost greater than a specified level
A failure that:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Major – must be rectified for the rolling stock to achieve its specified performance and
(Service failure)
– does not cause a delay or cost greater than the minimum threshold specified for
a significant failure
A failure that:
Minor – does not prevent rolling stock achieving its specified performance and
– does not meet criteria for significant or major failures
In order to better define the above mentioned failure categories the following conditions are
applicable to rolling stock and to all its subsystems, assemblies and parts:
• Significant failure (immobilising failure): Any failure occurring on rolling stock and leading,
at least, to one of the following conditions:
– A delay greater than a specified time,
– Train stopped on the track,
– Train not allowed to enter service,
– Withdrawal of the train from service,
– A cost greater than a specified threshold.
• Major failure (service failure): Any failure occurring on the rolling stock and leading, at
least, to one of the following conditions:
– A delay less than a specified time,
– Loss of specific functions or their performance threshold falling below the specified
minimum acceptable level,
– A cost less than a specified threshold.
• Minor failure:
– Any failure occurring on the rolling stock, that is not classified as significant or major,
leading to a maintenance task, even if this failure has no impact on service.
According to the above mentioned definitions and conditions of failures, the customer should
state:
• The number of minutes of delay for significant failures and major failures,
• The threshold cost for significant failures and major failures,
• The method for counting the delay (i.e. at the end of the run only, cumulated during all the
stops, the maximum between two stops, etc.),
• Specific service conditions which are deemed to result in stopping the train on the track or
withdrawing the train from service in case of significant failure,
– 16 – TR 62278-3 © IEC:2010(E)
• Functions and their performance thresholds, which are deemed to be classed as Major
Failures (e.g. the failure of the passenger air-conditioning, the failure of driver’s cab air-
conditioning, the failure of door system per side, the failure of a specified number of toilet
system, the failure of the coach lighting system, etc.).
Failure Threshold
Conditions Specification requested
category dimension
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Train stopped on the track Rolling stock unable to proceed under
or its own power.
SIGNIFICANT
(immobilising Withdrawal of the train from Specify special service conditions
failure) service/Train not allowed to under which the customer decides that
Fail I enter service the train is withdrawn from service or
or stopped from entering service
Threshold
Failure category Conditions Specification requested
dimension
Threshold
Failure category Conditions Specification requested
dimension
It should be noted that one or more conditions for each table of failure category might be
applied.
TR 62278-3 © IEC:2010(E) – 17 –
5.3.1 General
This subclause complements 4.5.2.2 and 6.4.3.2 of IEC 62278 and gives further additional
details.
The aim of this subclause is to give an overview of the most commonly used RAM
requirements in order to help the customer choose the most appropriate requirements for his
rolling stock, and also take into account any possible legal requirements, when existing.
In choosing the appropriate RAM requirements, the customer is strongly advised to consider
the following:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
requested, etc.),
• Economic implications,
• Practicalities of being able to measure RAM performance from his field operations,
depending on his organisational and logistical structure and service procedures.
The customer should document his process for choosing RAM requirements stating the
consideration given to address each requirement chosen.
This subclause provides guidance on description of reliability targets required for the failure
categories significant (Immobilising), major (Service) and minor failure. (i.e. MTBF in hours,
failure rate per million hours, or failure rate per million km).
The reliability targets are applicable to the total rolling stock and all its subsystems,
assemblies and parts according to the boundary limits defined.
Using the above definition the customer should specify the reliability targets for each one of
the failure categories in terms of:
MTBF requirement is intended for repairable units and MTTF is intended for non-repairable units.
If the real service operating time for the rolling stock and for its subsystems, assemblies and
parts could not be measured, the customer can choose, as appropriate, the following:
In addition, the customer could specify reliability targets for important systems/subsystems. In
such a case the customer could apply the following definition for failures affecting important
systems/subsystems:
The customer should specify the failure conditions in which the defined system/subsystem
does not accomplish its specified performances.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
System/ Max accepted failure rate Or FR I/S/M
subsystem 1 Number / Million hours
MTBF/MTTF/MDBF hours or km MTBF I/S/M /MTTF I/S/M /MDBF I/S/M
Number / Million km
System/ Max accepted failure rate Or FR I/S/M
subsystem 2 Number / Million hours
MTBF/MTTF/MDBF hours or km MTBF I/S/M /MTTF I/S/M /MDBF I/S/M
Number / Million km
System/ Max accepted failure rate Or FR I/S/M
subsystem … Number / Million hours
MTBF/MTTF/MDBF hours or km MTBF I/S/M /MTTF I/S/M /MDBF I/S/M
Number / Million km
System/ Max accepted failure rate Or FR I/S/M
subsystem n Number / Million hours
MTBF/MTTF/MDBF hours or km MTBF I/S/M /MTTF I/S/M /MDBF I/S/M
The customer can establish different tables for each failure category specifying the
requirements applicable for each table and adding an index I, S or M for indicating the
different failure categories (Immobilising, Service, Minor).
It should be noted that converting MTBF into MDBF, a predefined average speed is
necessary, where the average speed is based on specific requirements of the mission profile
(see 5.2.2.2).
This subclause provides guidance on description of the maintainability targets required for
rolling stock and for all its subsystems, assemblies and parts according to the boundary limits
defined.
For a rolling stock and for its subsystems, assemblies and parts according to the boundary
limits defined, there are different types of maintainability targets:
The qualitative requirements for maintainability should consider at least the following (see
Table 9), as an example:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
– 20 – TR 62278-3 © IEC:2010(E)
Accessibility The equipment layout, including their relevant connections, should be arranged in such a way
as to make it possible to easily perform inspections, repairs, revisions, replacement, etc.,
taking into consideration the dimensions of the tools that may be necessary to perform these
operations, the working area necessary for the maintenance personnel, the safety standards
and possible need for localised illumination.
All fastening points of the equipment and interfacing points between it and its infrastructures
(e.g. ventilation channels, fans, filters, etc.) should, as a rule, be accessible without the need
for special tools.
Dismounting It must be possible to remove any piece of equipment if needed for recovery from failure or
for scheduled maintenance, without having to operate on other pieces of equipment not
directly involved with the specific maintenance action.
Evaluation of removability of an item should also take into account the possible need for
removing parts of the rolling stock structure (e.g. hatches, casings, etc.) and the ease of
removing or opening and handling them.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Modularity In designing equipment every opportunity should be applied to increase the modularity of the
object so as to reduce intervention time, the specialisation of the personnel required and the
stocks to be kept on hand.
Modularity should make it possible to divide maintenance activities into two levels: primary
maintenance (rapid replacement of the unit), secondary maintenance (repair the unit off the
train, e.g. in the workshop).
Handling Every piece of equipment, device and item of furnishing subject to dismantling for
replacement, repair or programmed maintenance should not exceed the weight supportable
by a single person and should be capable of being manually handled by a single person.
This maximum weight may be doubled when the conditions of accessibility make it possible
for two persons to work together. The external features of the shape of the unit in question
should make it easy to handle and not hazardous or capable of injuring the personnel.
In the case of objects that have to be removed using mechanical hoisting equipment and/or
transportation, the layout and construction should provide for making available the necessary
provisions for hooking, fastening, hoisting with a forklift (eyebolts, hooks, feet, etc.). If the
hooking, hoisting or transportation equipment is not available on the market, it shall be
designed, constructed and supplied under the responsibility of the main supplier.
The connections existing between the unit and the structure and between the unit and other
interconnected units should be accessible, able to be disconnected and reconnected and not
subject to corrosion or rust in relation to the environment in which they are located.
Ease of cleaning All environments, apparatus, flooring and coverings should be designed in such a way as to
facilitate all operations of cleaning to the utmost. In particular as regards passenger vehicles
and environments, textile coverings that can be cleaned efficiently should be used. Carpeting
and wall-to-wall textile flooring should be designed for easy replacement for cleaning off the
rolling stock by providing appropriate breaks especially in the environments subject to heavy
traffic (corridors, vestibules, etc.).
The main supplier should indicate the cleaners compatible with the materials and coverings used.
As a general rule, in the visible environments, all efforts should be made to avoid sharp
corners, indentations, complicated relief patterns or hollows where dirt could accumulate or
that could be difficult to clean. This should be verified on the mock-up.
Standardisation Solutions used should, to the maximum extent, make it possible to interchange parts with
others already in use by the customer and installed on other rolling stock. In particular, for
elementary objects, commercial or unified solutions should be used, or parts already in use
by the customer as classified replacement parts.
For parts already in use by the customer, he should supply a list. For parts unique to the
customer, he may reserve the right, if necessary, for such parts to be restricted for his sole
use.
There should also be a close match between the drawings and the effective realisation of the
pneumatic and electric circuits for all rolling stock of the same supply.
Interchangeability It should be possible to remove an item and install another one in its place without affecting
any equipment characteristics.
The replacement should be compatible in form, fit and function.
Testability Objects should be designed in such a way as to make it possible to identify their condition
clearly and rapidly. This means that it should be possible to perform, as far as practicable,
preventive diagnostics so as to check the condition of the object before a failure occurs and
to be able to perform corrective diagnostics in order to identify clearly which item may be
malfunctioning or damaged.
TR 62278-3 © IEC:2010(E) – 21 –
Examples of general and specific requirements are as follows (see Table 10):
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Maximum allowed number of personnel employed for
dimensionless MaxANP m
maintenance
Maximum man-hours for a specific maintenance action time MaxMMH
Maximum allowed time for dismounting/mounting time MaxAT d-m
Maximum allowed time for detecting/isolating/replacing faulty
time MaxAT d-i-r
items
Fault coverage dimensionless FC
Mean time to restore (corrective maintenance) time MTTR
Mean time to maintain (preventive maintenance) time MTTPM
Mean time to maintain (corrective maintenance) time MTTCM
Mean time between maintenance (preventive maintenance) Time, distance, cycles MTBPM
Mean time between maintenance (corrective maintenance) Time, distance, cycles MTBCM c
NOTE If it is not possible to measure time to reach maintenance site or to plan maintenance actions, contractual
fixed times can be used.
One way to consider maintenance cost is to require maximum allowed values within an
agreed period of time.
– 22 – TR 62278-3 © IEC:2010(E)
In this case the customer should specify which items are counted as maintenance cost and
the agreed period of time for counting.
Examples of items for maintenance cost are as follows (see Table 12):
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Preventive (scheduled) maintenance actions (including cost for
Money PM c
spare parts, for software and for personnel employed)
Also in this case customer should specify what this cost includes, detailing the items counted.
As appropriate, the customer may specify targets for important sub-systems of the rolling
stock (e.g., bogie, supply power module, doors, air conditioning system, toilet, etc.).
This subclause provides guidance on description of the availability targets required for rolling
stock and for all its subsystems, assemblies and parts according to the boundary limits
defined.
Based on Annexes A and C of IEC 62278, availability A of a rolling stock is specified as the
time for which a rolling stock is in a state to perform its mission.
MUT
A= ; with 0 ≤ A ≤ 1
MUT + MDT
where,
Availability over a predefined time interval T can then be calculated by stating the following
items:
The resulting down time d (T) within a time interval T (e.g., 1 year) is:
TR 62278-3 © IEC:2010(E) – 23 –
d (T) = (1 – A) × T
Depending on the definitions of MUT and MDT, it is possible to have different types of
availability using the same formula:
• Inherent availability, Ai
• Achieved (technical) availability, Aa
• Operational (logistic) availability, Ao
For Inherent availability, Ai , the definitions used for MUT and MDT are:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
MDT=MTTR=Mean Time To Restore (hours).
MTBF
Ai =
MTBF + MTTR
For Achieved (technical) availability, Aa , the definitions for MUT and MDT are:
In this case, MTTM a takes into account the mean time required to maintain rolling stock both
for preventive and corrective maintenance.
MTBM
Aa =
MTBM + MTTM a
For Operational (logistic) availability, Ao , the definitions for MUT and MDT are:
In this case, MTTM o takes into account the mean time required to maintain rolling stock both
for preventive and corrective maintenance, including logistical and administrative delays.
MTBM
Ao =
MTBM + MTTM o
Another measure for availability that could be considered is the ratio of the number of rolling
stock available for service in the monitored period and the whole fleet.
This is defined as Fleet Availability, FA, and the number of rolling stock available for service
is determined by the difference between the number of rolling stock in the whole fleet and the
number of rolling stock not available for service due to maintenance actions (preventive and
corrective maintenance).
– 24 – TR 62278-3 © IEC:2010(E)
Fop Ftot − Fm
FA = =
Ftot Ftot
where:
F op = number of rolling stock available for service
F m = number of rolling stock not available for service due to corrective and preventive
maintenance
F tot = total number of rolling stock in the fleet.
Yet another type of availability is the Schedule Adherence (respect of the schedule), SA,
measured as ratio of the number of journeys running according to schedule and the total
number of scheduled journeys.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
The number of journeys running to schedule can be determined by the difference between the
total number of scheduled journeys and the number of journeys not running to schedule due
to rolling stock related causes.
Fs Ftot _ s − Fns
SA = =
Ftot _ s Ftot _ s
where:
Fs= number of journeys running to schedule
F ns = number of journeys not running to schedule due to causes concerning rolling stock
F tot_s = total number of scheduled journeys
MTBF
Ai = Inherent availability Dimensionless
MTBF + MTTR
MTBM
Aa = Achieved (technical) availability Dimensionless
MTBM + MTTM a
MTBM
Ao = Operational (logistic) availability Dimensionless
MTBM + MTTM o
Fop Ftot − Fm
FA = = Fleet availability Dimensionless
Ftot Ftot
Fs Ftot _ s − Fns
SA = = Schedule adherence Dimensionless
Ftot _ s Ftot _ s
TR 62278-3 © IEC:2010(E) – 25 –
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Wait for spare parts,
• Time to prepare maintenance actions,
• Time necessary to shunt rolling stock.
This subclause complements 4.5.2.2 and 6.4.3.2 of IEC 62278 and gives further details.
The aim of this subclause is to provide simple guide line to help customers choose
appropriate figures for RAM requirements.
Considering the deliverables of the previous subclauses of the guide the customer should:
The above actions would enable the customer to make better choices with substantial
supporting documentation.
The customer should document his process for choosing RAM figures stating the
consideration given to address each figure chosen.
5.5.1 General
This subclause complements 6.1.3.5, 6.2.3.2, 6.2.3.3, 6.4.3.3 and 6.5.3.2 of IEC 62278 and
gives further details.
RAM programme is a set of activities to be performed along the system life cycle for ensuring
that the RAM requirements stated for the rolling stock are fulfilled at each development
phase.
– 26 – TR 62278-3 © IEC:2010(E)
An efficient RAM programme should be established and maintained over the whole life cycle
by both, main supplier and customer, taking into account the whole range, including
variations, of operational possibilities to be chosen during the life time of the rolling stock.
Within RAM programme, each entity involved should define and plan activities, for each
phase, that are within their responsibility.
RAM programme tasks should be managed in conjunction with the management of the
general functional and technical tasks, over the life cycle, through periodic reviews. The
review should ensure that the RAM requirements are being effectively addressed by providing
substantive information / visibility of the tasks through appropriate RAM analysis.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
A suitable configuration management system should be established and maintained by the
main supplier. This should identify and document modifications to specific characteristics of a
functional or physical item of the rolling stock. It should record and report the processing and
implementation status of the modifications and the verification of their compliance with stated
RAM requirements.
The main supplier is responsible for providing visibility of the configuration management
process through documented activities and periodic reviews.
During the periodic reviews the main supplier should provide reports specifying, as a
minimum, the following:
Since configuration control applies to all project phases (see IEC 62278 Figure 9, Note 1),
when the project progresses through Phase 10 to Phases 11 and beyond, a suitable
configuration management system should also be established by the customer.
TR 62278-3 © IEC:2010(E) – 27 –
An example of typical outline of RAM programme is shown below along with a list of contents:
1. INTRODUCTION:
1.1. PURPOSE
1.2. SCOPE
1.3. REFERENCE DOCUMENTS
1.4. DEFINITIONS AND ACRONYMS
2. DESCRIPTION OF THE SYSTEM
2.1. GENERAL DESCRIPTION:
2.2. SYSTEM BREAKDOWN:
3. RAM CONTRACTUAL REQUIREMENTS:
3.1. QUALITATIVE REQUIREMENTS
• Reliability requirements
• Maintainability requirements
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Availability requirements
3.2. QUANTITATIVE REQUIREMENTS
• Reliability requirements
• Maintainability requirements
• Availability requirements
4. RAM MANAGEMENT:
4.1. IMPLEMENTATION OF RAM
4.2. MANAGEMENT OF THE INTERACTIONS BETWEEN RAM ANALYSES AND
QUALITY PLAN
4.3. CONFIGURATION MANAGEMENT PROCESS
4.4. ORGANISATION AND RESPONSIBILITIES
4.5. RAM MAIN ACTIVITIES:
• System Life Cycle Phases
• RAM activities during life cycle
• RAM documentation
5. RAM PROGRAMME PLAN:
5.1 ASSUMPTIONS AND SCOPE OF ANALYSES
5.2 METHODS AND TOOLS USED
5.3 RAM DETAILED ACTIVITIES, ANALYSES AND DOCUMENTS
• Periodical RAM Programme reviews
• System Condition and Mission Profile
• Reliability Modelling, prediction and apportionment
• FMECA analysis and Reliability Block Diagram
• Fault Tree Analysis
• Software Reliability analysis
• Corrective Maintenance Analysis
• Preventive Maintenance Analysis
• Fault isolation and trouble shooting actions Plan
• Reliability development/growth testing programme
• Maintainability preliminary tests
• Reliability demonstration tests
• Maintainability demonstration tests
• Failure data collection from field
5.4 FOLLOW UP OF RAM CRITICAL ITEMS
6. RAM DELIVERABLE DOCUMENTS AND SCHEDULE
6.1 LIST OF RAM DELIVERABLES
6.2 SCHEDULE FOR RAM ANALYSES
6.3 PERIODICAL RAM ACTIVITIES REPORT
The RAM programme plan establishes all the programme management tasks, in terms of
timing and implementation details of the programme activities and documentation to
accomplish the RAM programme requirements.
– 28 – TR 62278-3 © IEC:2010(E)
The RAM programme plan includes declarations for the procedures, tools and time schedule
foreseen for implementing the RAM programme.
It should be noted that the main supplier is responsible for establishing the content of the
RAM programme, for the RAM programme plan and for submitting these documents to the
Customer for acceptance within the timescale agreed by the parties, in accordance with
System Quality Plan.
5.5.4.1 General
The aim of this subclause is to provide an overview of RAM analyses document templates and
data in order to give the user of the guide the ability to handle, with more practice, all the
issues related to the RAM programme.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
The following are examples of templates for the most common RAM documentation and
analyses to be provided by the main supplier in order to give substantive information/visibility
of the RAM activities carried out and to show that the rolling stock is likely to satisfy the RAM
requirements in each phase of the life cycle from the tender to the operation phase.
A list of tools suitable for use to perform the different analyses and to manage all RAM
activities is given in Clause B.5 of IEC 62278.
This refers to a set of data for the identification of the object being analysed. These types of
data are common through the different analyses and levels of the breakdown structure.
In order to simplify the common understanding, a three level breakdown structure has been
considered in these examples and the third level is the LRU level.
Generally, as a minimum, the kinds of data are as follows (see Table 14):
Table 14 – Example of minimum set of data of the header for RAM analyses template
Reliability prediction sheets should contain the following information (see Table 15 and Figure
1):
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Qty Amount of LRU in L2 assembly
Total failure rate Total failure rate, obtained as the product between the failure rate of the
(in failures/Mh) LRU and the qty of the LRUs in the L2 assembly
Total MTBF (h) Total MTBF referred to the total failure rate
Total failures rate Total failures per million km of the LRU
(in failures/Mkm)
Total Qty Total no. of LRUs in the whole rolling stock
Source of failure Origin of the failure rate indicated (also codes of data sources used)
rate
Notes Any possible clarifications on the origin of the failure rate and correction
factors introduced
It should be noted that where failure rate is expressed in Failures/Mkm, MDBF (Mean
Distance Between Failures) is used.
As in the following example (see Figure 1), the header also contains data for L2 assembly
(total failure rate and MTBF).
Reliability Prediction Sheets
Doc. N.
Version Number
Rolling Stock Code L2 Date of version
Code L1 L2 Assy
Drawn up by
L1 Assy Drwg or Diagr Ref
Page n/N
File name
Total Failure
Code Part Failure Rate Qty Total F. Rate Total MTBF Total MKBF Total Failure Rate
LRU Description MTBF (h) Rate Notes
Number (f/10^6 h) (f/10^6 h) (h) (km) Qty Source
LRU (f/Mkm )
– 30 –
IEC 644/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TR 62278-3 © IEC:2010(E) – 31 –
5.5.4.4 Maintenance attributes (maintenance levels, skill level and LRU definition)
Within railway field there are several definitions and attributes of maintenance.
The purpose of this subclause is to address every practical maintenance action in order to
clarify the issues affecting RAM requirements and also to give an example of a maintenance
organisation/modelling.
Generally, most railway operators would have an existing depot for the rolling stock with
trained personnel, resources, and a minimum set of spare parts, tools and equipment to carry
out maintenance. The target for the depot is to minimise standstill time for the rolling stock in
order to release it, ready for service, following completion of maintenance within the lowest
possible time.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Where the complexity of maintenance actions, related to the trained personnel, resources,
minimum set of spare parts, tools and equipment available within the depot, does not meet
this target, the maintenance actions need to be carried out elsewhere, e.g. within a
specialised depot/workshop, and the rolling stock would be out of service for the duration.
The first situation is commonly referred to as "In-Service Maintenance" and the second one as
"Out-of-Service Maintenance".
Considering the above situations and as the main purpose of the analyses is to meet RAM
requirements, there are 2 possibilities for carrying out preventive maintenance:
a) In-service maintenance: In this case two choices can be considered for addressing the
target of minimising standstill time:
• All the scheduled maintenance actions are carried out in the depot,
• Only removing/installing of items (replacing an item with a spare) is carried out in the
depot. Other maintenance actions are carried out on the removed items in a
specialised depot/workshop.
b) Out-of-service maintenance: In this case only one choice can be considered:
• All the scheduled maintenance actions are carried out in a specialised
depot/workshop.
For these situations, the preventive maintenance analysis templates and data sheets can be
used with the following two codes as "Maintenance Level Codes":
A similar situation occurs when corrective maintenance is considered, but in this case
besides the resources of the depot (personnel, tools, equipment, and so on), also the failure
mode shall also be taken into account as an attribute affecting the RAM requirements and
then considering "repairable failure mode" and "not repairable failure mode the following
cases are possible:
a) In-service maintenance: In this case two choices may be considered for addressing the
target of minimising standstill time:
• Repairable failure mode: All maintenance actions for the repair are carried out in the
depot,
• Not repairable failure mode: Only removing/installing items is carried out in the depot
(replacing a failed item with a spare).
b) Out-of-service maintenance: In this case only one choice can be considered:
– 32 – TR 62278-3 © IEC:2010(E)
• Repairable failure mode: Both the removing/installing of items (replacing a failed item
with a spare), and the other maintenance actions for the repair of the failed item are
carried out in the depot/workshop
For these situations, the corrective maintenance analysis template and data sheets can be
used with the following three codes as "Maintenance Level Codes":
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Repairable Not repairable
failure mode failure mode
In-service All the Only All the Only replacing
(depot) scheduled removing/installing maintenance failed item with
maintenance of items actions to repair spare items
actions
Out-of- All the scheduled maintenance All the maintenance actions to repair
service actions
(workshop)
Several definitions of maintenance levels are known and usually "In-Service" maintenance is
quite similar to "Light maintenance" or "first level maintenance" and also "Out-of-Service"
maintenance is quite similar to "Heavy maintenance" or "second level maintenance".
Depending on the definition of in-service maintenance, the LRU (Line Replaceable Unit) may
also be defined as follows:
LRU is the item on which in-service maintenance (both preventive or corrective) actions are
carried out.
This definition could be used where the depth of the Breakdown Structure has been defined
(see 5.2.2.3).
As an aid to establish "Skill Level Codes", the following are suggested as examples:
• Low skill level (Code "L"): Personnel with basic knowledge of the systems/subsystems and
able to perform simple and easy tasks such as:
– tasks where the item is directly visible (easily accessible without complex
disassembling actions) and the task can be performed using standard tools
(screwdriver, wrench, etc.);
• Intermediate skill level (Code "I"): Personnel with specific knowledge of the
systems/subsystems and able to perform more advanced tasks such as:
– searching for the item needing maintenance, using non standard tools/equipment
(multimeter, gauge, tester, etc.) and performing disassembling tasks with the aid of
diagrams and maintenance manuals;
• High skill level (Code "H"): Personnel with complete and specialised knowledge of the
systems/subsystems and able to carry out complex tasks such as:
– searching for the item needing maintenance, using sophisticated tools for technical
measures (oscilloscope, logic state analyser, etc.) and performing fine tuning and
disassembling tasks with the aid of drawings, diagrams and maintenance manuals.
TR 62278-3 © IEC:2010(E) – 33 –
Preventive maintenance analysis sheets should contain the following information (see Table
16 and Figure 2):
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Spare parts and Description of the special equipment (not provided by the depot or workshop and in any case
special tools not easily available on the market) and materials necessary (consumables and spares)
Frequency Frequency of the maintenance task (time or km)
Maintenance level Codes of the maintenance levels used by the maintainer
Personnel Number of persons necessary at the same time for the maintenance task described
Skill level Code of the Skill level requested for the personnel to carry out the maintenance task
Spare parts cost Unit cost of materials expressed in monetary unit
Man hours Time required for the maintenance task multiplied by the number of persons necessary
Standstill time Standstill time for the rolling stock during the maintenance task
Total qty Total no. of LRUs in the whole rolling stock
Notes Any notes, comments or remarks on the logistics or other (e.g. references to the maintenance
manual)
The customer should define the man-hour cost to enable the cost calculation to be carried out
in the sheets if the costumer requires labour costs.
As in the following example (see Figure 2), the header also contains data for L2 Assembly
(Total cost for spare parts and man-hour).
Preventive Maintenance Sheets
Doc. N.
Rolling Stock Code L2 Version Number
Code L1 L2 Assy Date of version
L1 Assy Drwg or Diagr Ref Drawn up by
Page n/N
Spare Parts Man-hour
Total Cost
Cost Cost File name
(€/1000km)
(€/1000km) (€/1000km)
L2 Assy total Data
Spare
Step Maintenance Parts and Maintenance Spare Parts Man- Standstill
Code LRU Part Qty Frequency Personnel Skill Total Qty Notes
N° Task Special Level Cost hour Time
LRU Description Number
Tools N.
Level
– 34 –
IEC 645/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TR 62278-3 © IEC:2010(E) – 35 –
As an aid to establish the maintenance plan the following sheet "Preventive maintenance
sheet for a single frequency" contains rearranged data already contained within "Preventive
maintenance analysis sheet" (Figure 3) and further data needed for logistic organisation.
This sheet only contains preventive maintenance data for an LRU maintained during the same
frequency interval.
The frequency (time or km) under analysis has to be indicated in the header.
It also contains indications for future logistic organisation of the maintainer within the
"Frequency total data", where the main supplier should indicate the following data for the
frequency interval analysed:
• spare parts cost needed to complete all the maintenance tasks of the frequency interval,
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• man-hour requested to complete all the maintenance tasks of the frequency interval,
• standstill time for the rolling stock to complete all the maintenance tasks of the frequency
interval,
• maximum number of persons simultaneously involved to complete all the maintenance
tasks of the frequency.
Preventive Maintenance Sheets for Frequency
Doc. N.
Rolling Stock Code L2 Version Number
Code L1 L2 Assy Date of version
L1 Assy Drwg or Diagr Ref Drawn up by
Spare
Spare
Step Maintenance Parts and Maintenance Stand-
Code LRU Part Qty Personnel Skill Parts Man-hour Total Qty Notes
N° Task Special Level still
Description Number Cost
Tools Time
– 36 –
LRU N. Level
IEC 646/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TR 62278-3 © IEC:2010(E) – 37 –
The corrective maintenance analysis sheets should contain the following information (see
Table 17):
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Spare parts and special tools Description of the special equipment (not provided by the depot or workshop and
in any case not easily available on the market) and materials necessary
(consumables and spares)
Failure rate (in failures/Mh) Failure rate of the failure mode of the LRU expressed in number of failures per
million hours
Maintenance level Codes of the maintenance levels used by the maintainer
Personnel Number of persons necessary at the same time for the maintenance task
described
Skill level Code of the skill level requested for the personnel to carry out the maintenance
task
Spare parts cost Unit cost of materials expressed in monetary unit
Man hours Time required for the maintenance task multiplied by the number of persons
necessary
Standstill time Standstill time for the rolling stock during the maintenance task
Total quantity Total no. of LRUs in the whole rolling stock
Notes Any notes, comments or remarks on the logistics or other (e.g. references to the
maintenance manual)
The customer should define the man-hour cost to enable the calculation of costs to be carried
out in the sheets if the costumer requires labour costs.
As in the following example (see Figure 4), the header also contains data for L2 Assembly
(Total cost for spare parts and man-hour).
Corrective Maintenance Sheets
Doc. N.
Page n/N
Spare Parts Cost Man-hour Cost Total Cost
File name
(€/1000km) (€/1000km) (€/1000km)
IEC 647/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TR 62278-3 © IEC:2010(E) – 39 –
5.5.4.7 Failure mode effects and criticality analysis template and data sheets
FMECA can be carried out to examine functions or items; the following example (see Table
18) shows an items analysis. The items FMECA sheets should contain the following
information as shown in Figure 5:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Failure mode The predicted or observed results of a failure cause on the LRU in relation to the
operating conditions at the time of the failure
Failure cause The circumstances which have led to a failure
Failure rate (in failures/Mh) Failure rate of the failure mode of the LRU expressed in number of failures per
million hours
Local effects Worst effects of the failure mode on the LRU
Effect on next higher assy. Worst effects of the failure mode on the L1/L2 assembly
Effects on rolling stock Worst effects of the failure mode on the rolling stock, also considering its
possible effects on other assemblies or subassemblies
Criticality Code of the category of criticality of the failure mode according to a stated table
of reference considered on the basis of its effects, affecting safety and/or service
Failure category description Codes and description of the failure category according to the failure categories
established
Diagnosis Description of the method of detecting and identifying the failure mode, including
diagnostics used to detect and identify
Preventive/corrective actions Description of the measures or compensatory means suggested to prevent the
failure mode or minimise its criticality or reduce/eliminate its effects.
Notes Any notes, comments or remarks useful for the analysis
• the designer when the FMECA is carried out during the design phase in order to improve
the design of the rolling stock,
• the “on board” and maintenance personnel and then included in the maintenance and user
manuals in order to improve the service of the rolling stock.
It should be noted that “Function reference” in the example of FMECA sheet to examine
functions represents the identification number of the functional block diagram where the
function under consideration is detailed and the "N°" column represents the function reference
number of the function under consideration within the functional block diagram (N° is only
used where a functional block diagram contains more than one function).
Items FMECA Sheets
Doc. N.
Rolling Stock Code L2 Version Number
Code L1 L2 Assy Date of version
L1 Assy Drwg or Diagr Ref Drawn up by
Page n/N
File name
Rolling
LRU (F/Mh) Local Assy
Stock
IEC 648/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Doc.N.
FUNCTIONS FMECA Sheet Version Number
Date
Rolling Stock Page n/N
Function Reference Drawn up by
Filename
TR 62278-3 © IEC:2010(E)
Effects on
Failure Failure Failure Preventive/Corrective
N° Function Sub function Phase Criticality Diagnosis Notes
mode cause Category Actions
Local Rolling Stock Operation
– 41 –
IEC 649/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
– 42 – TR 62278-3 © IEC:2010(E)
6.1.1 General
This subclause provides information supporting overall and preliminary RAM requirements.
It also gives information about activities and documentation during the life cycle phases
supporting detailed specifications and requirements for the rolling stock including its systems
and sub-systems.
Also, this subclause aims to define which phases of the system life cycle the RAM Programme
deals with and provides more information about:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• activities to be managed,
• analysis and tools to be implemented,
• documentation to be provided
Based on the above considerations, the RAM programme could be defined as shown in Figure
7.
1 Concept
3 Risk Analysis
7 M anufacture
8 Installation
9 System validation
10 System acceptance
IEC 650/10
Figure 7 – RAM programme and life cycle phases
All the entities involved in the rolling stock life cycle phases should also be established.
The following example (Figure 8) shows the integration process and the programme
implementation when:
TR 62278-3 © IEC:2010(E) – 43 –
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Call for tender • Feasability analysis • Feasability analysis
• Risk analysis • Risk analysis
• Negociation • Answer to the tender • Answer to the tender
• Decision • Negociation • Negociation
PROGRAMME IMPLEMENTATION
• Mission profile • Apportionment of RS performances • Apportionment for equipment
• Operating rules • Definition of mission profile • Definition of mission profile
RAM Programme Plan
• RAM Preliminary analyses
Preliminary Design Review • Detailed analyses
• RAM Detailed analyses RAM synthesis reports
• Consolidation of RAM analyses
Final Design Review • Performance growth monitoring • Implementation of action plans
• RAM Demonstration
RAM Synthesis Report
Final acceptance
IEC 651/10
As stated within each phase of IEC 62278, deliverables of each phase form inputs to
subsequent phases.
This consideration implies that the results of each phase shall be confirmed during successive
phases.
The customer prepares tender phase (see Figure 7, life cycle phases 1 to 5) and the resultant
call for tender document sent to the potential main suppliers.
Call for tender contains data about concept, definition and specification of rolling stock and
RAM requirement to be fulfilled, according to Clause 5 of this technical report.
The customer should ask the potential main suppliers for RAM data and analysis during
tender phase. This documentation is useful to enable the customer to compare the different
offers on the same basis.
Examples of documentation to be requested during tender phase can be taken from design
phase documentation (see 5.5.4).
– 44 – TR 62278-3 © IEC:2010(E)
Before responding to the call for tender, the main supplier has to perform relevant tasks,
given below, to ensure that all risks related to the compliance with each requirement have
been taken into consideration:
• Feasibility analysis: Enables determination of the best reasonable performances that can
be achieved based on current experiences and past data, taking into account any
differences in the new mission profile and/or the new system definition. This task is
performed at rolling stock level, using current experience on similar applications and using
analysis models like fault tree analysis or reliability block diagrams,
• Commercial risk analysis: Referring to the resulting best reasonable performances
achievable from feasibility analysis, this task enables calculation of the probability of
incurring penalties taking into account the gap between required and achievable
performances,
• Response to the tender: Produce the RAM documents requested by the customer and
write the RAM relevant sections of the offer and,
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Negotiation: Respond to queries/questions raised by the customer and/or support the
negotiation team during the negotiation phase.
After receiving offers the customer evaluates the documents and chooses the best offer.
Usually a short phase of negotiation between the customer and the potential main supplier is
planned, where contractual agreements are confirmed.
This subclause gives details and practical information on phase 6 of system life cycle
requirements described in 6.6 of IEC 62278.
The following flow chart (Figure 9) shows an example of the different RAM programme tasks
to be implemented after contract award or notice to proceed.
The input documentation of this phase is the tender documentation presented by the main
supplier and the contractual agreements confirmed during negotiation.
TR 62278-3 © IEC:2010(E) – 45 –
RAM RAM
specification programme
Contractual Contractual
agreements requirements
Preliminary
Allocation analyses
Product
Functional definition
Tender
documentation specifications Preliminary Design
Review
Mission
Detailed analyses
profile
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Points
CRITICA Identificatio
COMMISSIONING
L ITEMS
ACCEPTANCE &
RAM Growth monitoring Data
from
test
No and
Action Plan Satisfactory field
Yes
Final acceptance
Demonstration phase
IEC 652/10
Figure 9 – Flow diagram representing activities/documentations of design phase
RAM specification After contract award, the first step is for the rolling stock main supplier to
specify to the sub contractors, partners or equipment suppliers the
contractual requirements related to the subsystems, functions or
equipment in their scope of supply.
Generally, it also includes the RAM programme delivery requirements for
approval.
Preliminary The inputs of this task are the tender documents and the contractual
analyses agreements.
Implemented at functional level, this task aims to highlight the critical
RAM functions on which further detailed analyses should focus.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
During this phase, functions should be classified using the failure
categories defined by the main supplier and adapted for the specific
requirements of the contract.
This task is performed using functional FMECAs to identify critical RAM
functions and using reliability block diagrams.
The deliverable of this task is a set of preliminary analysis to cover all the
RAM requirements.
Generally, the depth of analyses is limited to the level of breakdown
structure for which, data and specification of the technical and functional
design is available in sufficient detail.
Preliminary design This design process milestone is to check that design has progressed to
review preliminary stage. The RAM documentation should be reviewed at this
milestone to ensure that RAM activities are in step with design progress,
RAM requirements are being properly achieved and to examine any
problems arising.
Detailed analyses This task aims to perform detailed analyses highlighted during the
preliminary analyses.
During this task the main supplier should have progressed the design to
sufficient detail corresponding to the LRU level of the rolling stock
breakdown structure.
Consequently, the analyses from the previous phase should be updated
and detailed considerations given to the RAM.
The final scope of such analyses is to ensure that the rolling stock design
satisfies all the RAM requirements and the following:
resolve any problems identified during previous analysis or review,
verify the completeness of the set of documents,
prepare activities for tests and for collection of field data.
During this phase the main supplier should also collect detailed analyses
carried out by sub contractors in order to:
• Ensure a good consistency between them,
• Integrate, in the analysis model, the predictions provided by
them at equipment level, in order to get the predictions at
rolling stock level,
• Integrate interface mismatches in the model for the
predictions.
TR 62278-3 © IEC:2010(E) – 47 –
Table 19 (continued)
Final design This design process milestone is to check that design has progressed to
review completion. RAM documentation should be reviewed at this milestone to
ensure that all the RAM requirements have been properly achieved and
to examine any problems arising.
The final scope of this review is to:
check the fulfilment of RAM requirements,
resolve any outstanding problems
verify the completeness of the set of documents,
prepare activities for tests and collection of field data.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
RAM growth This task aims to monitor RAM growth (essentially reliability growth) so
monitoring that the time to get steady state level is the shortest possible in revenue
service.
This task consists in the implementation of a problem solving process
involving all the subcontractors and the main supplier in order to:
Identify the problems occurring during the earliest operation phase,
Highlight the top most problem contributors affecting contractual
service performances,
Implement an action plan to eradicate the problems or to mitigate
their effects,
Follow up the impact of such action plan to decide whether to carry
on the iterative process or to stop it.
Follow up of This task is a specific management task implemented all along the design
critical items process from preliminary analysis to service operation.
It consists of:
Identifying, as part of the RAM analysis process (preliminary and
detailed analysis), critical scenarios (i.e., failures effecting service or
safety),
Classifying these scenarios in a hierarchy based on the combination
of their estimated frequency of occurrence and their effects on the
level of safety or service,
Proposing or asking the designers to propose actions or provisions to
eliminate the scenarios or to mitigate their effects,
Estimating the impact of the action plan,
Following up application of these actions during the latest design
phases or during manufacturing,
This task is performed using problem solving techniques.
Note that the provisional calculation of RAM parameters described in this subclause is usually
based on the use of probabilistic figures.
6.1.4.1 General
This subclause gives details and practical information on phases 9, 10, 11 of system life cycle
requirements described in 6.9, 6.10 and 6.11 of IEC 62278.
This subclause deals with the operation period in which the customer should check the
fulfilment of RAM contractual targets for the rolling stock under consideration by conducting
RAM demonstration tests and collection of field data.
Also, collection of data from field enables the main supplier to:
Also, for long term operation, the objective is to find out weak points in the management
process (operation and maintenance phases) in order to form a basis for further performance
improvement and cost reduction and to optimise maintenance and/or operation.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
The definition of test procedures has to be consistent with the system identification process
and definition given in Clause 5.
All the RAM documents provided during the design phase, according to the RAM programme,
are intended to be proof of compliance with RAM requirements for the rolling stock.
On the basis of the RAM requirements chosen, the customer should define the RAM
acceptance criteria for the field.
The definition of reliability acceptance criteria should also specify the conditions under which
a failure is classified as "chargeable", i.e. under main supplier responsibility, or alternatively is
classified as "not-chargeable".
Note that accidental events are intended to be events in which the system performances are
degraded due to external causes which are not coming from the system itself, its normal
operation, or the supplier staff.
In the same way the customer should define, before the beginning of the checking period and
for each RAM requirement, detailed acceptance criteria in order to establish clear rules to be
followed.
The customer is responsible for defining an appropriate duration for the checking period.
For defining a checking period, the customer should consider that usually RAM targets may
not be achieved in the first period of operation but after a burn-in period, during which a
reliability growth monitoring process should have been implemented.
Generally, the steady state level is achieved at least after two years of revenue service.
TR 62278-3 © IEC:2010(E) – 49 –
Reliability growth monitoring process is a continuous monitoring of the field data, successive
RAM analysis and matching of the results against the targets for contractual requirements.
Additional requirements may be agreed between customer and supplier.
Where results from field data fall short of contractual requirements, the main supplier should
undertake corrective actions .
• Within the reliability growth process, the corrective actions shall be managed as described
in 5.5, with a corrective action plan, as appropriate.
• Before start of the RAM checking period, reliability growth process should be concluded.
• In order to manage a coherent field data collection, the rolling stock configuration status
should have been stable and frozen. If technical modifications are necessary, the supplier
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
should precisely quantify the consequences of modified configuration (e.g. software
update).
• In choosing the duration of the checking period, the following should be taken into
account:
– number of rolling stock in the fleet and the cumulative annual kilometres of service,
– maintenance plan of the rolling stock,
– RAM requirements chosen by the customer,
– duration of the contractual relationship between the customer and the main supplier
(i.e. duration of warranty period).
The customer should also consider, as appropriate, whether the checking period and field
data collection should cover
Field data collection, within the checking period, comprises of gathering data on failures and
the whole processing of the fault, such as:
Also, reports about repair and cause of failure are necessary to address the correct corrective
actions.
Identification data has should be collected to enable traceability for further investigations,
such as:
Usually, the customer and the main supplier agree for a RAM demonstration plan to contain
specification for, at least, the following:
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
• Field data collection sites (depots, workshops),
• Reference documents (i.e. RAM analyses and breakdown structure),
• RAM contractual targets,
• Acceptance criteria,
• Procedure for collecting data,
• Detection of all data source and any disturbances,
• Schedule of periodical field data collection reviews,
• Procedure to resolve problems and to address corrective actions,
• Procedure for implementing corrective action plan.
It is important to note that the corrective action plan should also contain the assessment of
the impact of the corrective actions on the configuration management process as explained in
5.5.2.
7.1 General
The aim of this subclause is to give an overview of life cycle cost, pointing out the RAM
parameters to be incorporated into a LCC model for rolling stock.
Life cycle costing is the process of economic analysis to assess the total cost of acquisition
and ownership of a product. This analysis provides important inputs in the decision making
process with regard to product design, development and use.
Railway customers and operators require railway products that are reliable, safe and can be
easily maintained over their useful lives.
Using LCC, main suppliers can optimize their designs by evaluating alternative designs and/or
configurations and by performing trade-off studies. In this way, they can evaluate various and
different operating and maintenance strategies to optimize LCC.
Also, the LCC technique can be used to give a value to compare different offers and
alternatives and to control the project.
As RAM requirements influence cost of rolling stock, they are the basis of any life cycle cost
calculation.
TR 62278-3 © IEC:2010(E) – 51 –
Life cycle cost is the cumulative cost generated by the rolling stock during its lifetime in
respect to a LCC model. LCC modelling is a simplified representation of the main features of
the rolling stock translating them into cost figures.
• The physical structure of the rolling stock and its mission profile,
• The relevant phases of the lifetime to be considered,
• The relevant cost categories to be considered.
Regarding the first bullet item, consideration should be given to 5.2.2.3, breakdown structure
and boundary limits, and its subclauses 5.2.2.3.1, 5.2.2.3.2 and 5.2.2.3.3, and to 5.2.2.2,
system identification.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
The second bullet item is well explained within IEC 62278 and, depending on the phases
chosen, it also addresses the third bullet item.
In any case the total costs incurring during the main phases can be grouped under the
following three categories:
• Acquisition costs,
• Ownership costs,
• Disposal costs.
Following this simple outline, the derivation of detailed sub-categories and costs can be easily
carried out and so it makes modelling of LCC possible.
The completion of a suitable model is outside the scope of this guide but the above
information is useful to give an overview and to better introduce the RAM parameters for
inclusion into an LCC model.
For more detailed consideration for developing an LCC Model see IEC 60300-3-3.
Starting from reliability parameters, Table 5 and Table 6 already contain, under column
"conditions", parameters that can have direct impact on LCC.
Also, failure rate (or MTBF/MTTF/MDBF, see Table 8) has an impact on LCC. But this impact
can be evaluated considering maintenance cost.
Maintenance cost is one of the most significant costs of the whole LCC.
Corrective maintenance is larger for older rolling stocks than new ones, once the early failure
period of new rolling stock has been overcome.
The proportion spent on preventive maintenance peaks in years when expensive actions are
carried out (i.e., major inspections, replacement of expensive parts, refurbishing and
overhaul, etc.). As these actions are only carried out two to five times throughout the service
life, consideration should be given to these when preventive maintenance costs are
evaluated. This should be considered to ensure that maintenance costs from different
operators or from different rolling stock main supplier are compared on the same equal basis.
– 52 – TR 62278-3 © IEC:2010(E)
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Derivation of the parameters related to availability is quite difficult, because they depend on
the consequences caused by the lack of use of the rolling stock in service.
The immediate cost consequences due to unavailability of the rolling stock can be the
following:
Estimation of these costs is typically a commercial or marketing matter and then the
derivation of costs related to unavailability could not have any relationship with the elements
contained in 5.3.4. But when the estimate is to be based on the time (expressed in hour or
days) during which the rolling stock is in a "down state" or alternatively when it is to be based
on the journeys not operated, the parameters of Table 13 can be easily applied.
TR 62278-3 © IEC:2010(E) – 53 –
Annex A
(informative)
A.1 General
This annex is intended to give a generalised illustration to the text describing the RAMS
processes. It is not intended to conflict with nor should it be confused with EN 15380 which is
a designation system for railway vehicles.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
Two possible ways of representing a structure are highlighted below:
The following gives an example of the organisation chart for a rolling stock "EMU (Electrical
Multiple Unit) COACH", where for visual purposes only two branches have been developed.
TREE BREAKDOWN STRUCTURE
Page n/N
File name
EMU
Coach
Code:1 Code:2 Code:3 Code:4 Code:5 Code:6 Code:7 Code:8 Code:9 Code:10
Def: Carbody Def: Door Def: Pneum. and Def: Lighting Def: Fittings Def:Autom. fire Def:Compart air Def:Service Def:Toilet Def:Electrical
braking system system Qty: 1 extinguishing conditioning functions Qty: 1 equipment
Qty: 1 Qty: 1 Qty: 1 Qty: 1 Qty: 1 Qty: 1 Qty: 1 Qty: 1
– 54 –
IEC 653/10
Figure A.1 – Example of physical structure using organisation chart for an Electrical Multiple Unit Coach
TR 62278-3 © IEC:2010(E)
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TREE BREAKDOWN STRUCTURE
Page n/N
File name
TR 62278-3 © IEC:2010(E)
EMU
Coach
Code:3 Code:6
Code:1 Code:4 Code:7 Code:10
Code:2 Def: Pneum. Def:Autom. Code:8
Def: Def: Code:5 Def:Compart Code:9 Def:Electrica
– 55 –
Code:1.2 Code:8.1
Code:1.4 Code:1.6
Code:1.1 Def: Side Code:1.3 Code:1.5 Def: Code:8.2
Def: Side Def:
Def: Heat window Def: Floor Def: Roof Passenger Def: Video
wall Underframe
Insulation passenger inf. system surveillance
panelling
Qty: 1 room Qty: 1 Qty: 1 Qty: 1
Qty: 2 Qty: 1
Qty: 10
Code:8.2.3
Code:8.1.2 Code:8.1.3 Code:8.1.4 Code:8.2.2
Code:8.1.1 Code:8.2.1 Def:
Def: Def: Def: Def:
Def: Power Def: Power Interconn/peri
Control/monitori Data/memory Interconnection Control/monitori
supply Supply system pherals
ng system unit system s/peripherals ng system
IEC 654/10
Figure A.2 – Example of functional structure using organisation chart for an Electrical Multiple Unit Coach
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
– 56 – TR 62278-3 © IEC:2010(E)
The following represents an example of an EMU traction vehicle breakdown structure using a
tree diagram.
Page n/N
File name
Code L1 - System Qty Code L2 - Sub-system or LRU Qty Code L3 - LRU Qty
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
1 Carbody 1
1.1 Heat insulation 1
1.2 Front panel 1
1.3 Side window, passenger 14
room
1.4 Side window, driver's cab 2
1.5 Floor 1
1.6 Side wall, panelling 2
1.7 Roof 1
1.8 Nose cover 1
1.9 Obstacle deflector 1
1.10 Energy absorbtion elements 2
1.11 Aerodynamic front nose 1
structure
1.12 Underframe 1
2 Motor bogie 1
2.1 Bogie frame 1
2.2 Carrier 1
2.2.1 Steering rod 1
IEC 655/10
Figure A.3 – Example of structure using the tree breakdown chart for an EMU
(Electrical Multiple Unit) traction vehicle
TR 62278-3 © IEC:2010(E) – 57 –
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
bogie (set)
2.14 Earthing contacts 2
3 Trailer bogie 1
3.1 Bogie frame 1
3.2 Carrier 1
3.2.1 Steering rod 1
IEC 656/10
4 Auxiliary elements on 1
the bogie
4.1 Sanding device 2
4.1.1 Sanding trap 1
4.1.2 Sanding pipe and nozzles 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
4.2.2 Pump 1
4.2.3 Magnetic valve 1
4.2.4 Turbolub distributer 1
4.2.5 Nozzle 2
4.2.6 Control unit 1
5 Door 1
5.1 Passenger door 2
5.1.1 Drive/motor unit 1
5.1.2 Roller swing arm, right 1
5.1.3 Roller swing arm, left 1
5.1.4 Emergency egress device 1
(inside)
5.1.5 Bowden cable, emergency 1
egress device (inside)
5.1.6 Emergency egress device 1
(outside)
5.1.7 Bowden cable, emergency 1
egress device (outside)
5.1.8 Doorleaf, right 1
5.1.9 Doorleaf, left 1
5.1.1 Lock box 1
0
5.1.1 Light barrier 1
1
5.1.1 Control unit 1
2
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
6.1.1 Supplies 1
1
6.1.1 Earthing 1
2
6.1.1 Coupler head, electrical part 1
3
7 Articulation 1
7.1 Articulated damper, rolling 1
7.2 Articulated damper, pitching 1
7.3 Articulated damper, yawing 1
7.4 Intercommunicating gangway 1
7.4.1 Bellows 1
7.4.2 Bellows frame 2
7.4.2 Step board 1
8 Electrical equipment 1
8.1 Traction 1
8.1.1 Propulsion inverter boxes 1
8.1.2 Electric traction motor 2
8.1.3 Speed sensor for traction 4
control
8.1.4 Traction control unit 1
8.1.5 Rheostatic breaking 1
resistors
IEC 658/10
9 Pneumatic and 1
braking system
9.1 Brake control device 1
9.2 Direct brake control device 1
9.3 Electronic control unit 1
9.4 Signalling repetition plate 1
9.5 Antiskid redounded (1 per 1
axe)
9.6 Pneumatic group 1
9.7 Brake devices group 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
9.8 Motor bogie secondary 1
suspension reservoir
9.9 Trailer bogie secondary 1
suspension reservoir
9.10 Passenger alarm brake 1
10 Lighting system 1
10.1 Compartment lights 1
10.2 Driving cab lights 1
10.3 External lights 1
10.3. White lights 2
1
10.3. Red lights 2
2
10.3. Green lights 1
3
10.3. Central lights 2
4
11 Fittings 1
11.1 Compartment fittings 1
11.1. Passenger seat 61
1
11.1. Foldable seat 2
2
11.1. Manual curtain 18
3
11.1. Dresshanger (set) 1
4
11.1. Luggage rack 1
5
11.1. Hand rails (set) 1
6
11.1. Litter box 1
7
11.1. Ticket vending machine 1
8
11.1. Fire extinguisher 1
9
IEC 659/10
12 Automatic fire 1
extinguishing
13 Driving cab air 1
conditioning
13.1 Ventilation 1
13.2 Cooling 1
13.3 Heating 1
14 Compart air 1
conditioning
14.1 Ventilation 1
14.2 Cooling 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
14.3 Heating 1
14.4 Heaters 45
15 Tachograph device 1
16 Dead man device 1
17 Driver's desk 1
17.1 Light rack 1
17.2 Instruments rack 1
17.3 Video surveillance monitor 1
17.4 Console 1
17.5 Radio equipment 1
17.6 ATP equipment 1
18 Service functions 1
18.1 Passenger information 1
system
18.1. Loudspeaker 8
1
18.1. Controller 1
2
18.1. Cab Control Unit 1
3
18.1. Emergency speech unit 4
4
18.1. Internal information display 2
5
18.1. External side display 2
6
18.1. Handset 1
7
IEC 660/10
IEC 661/10
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
TR 62278-3 © IEC:2010(E) – 63 –
The following (Figure A.4) represents an example of an EMU (Electrical Multiple Unit) coach
breakdown structure using a tree diagram.
Page n/N
File name
Code L1 - System Qty Code L2 - Sub-system or LRU Qty Code L3 - LRU Qty
1 Carbody 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
1.1 Heat insulation 1
1.2 Side window, passenger 10
room
1.3 Floor 1
1.4 Side wall, panelling 2
1.5 Roof 1
1.6 Underframe 1
2 Door 1
2.1 Passenger Door 2
2.1.1 Drive/motor unit 1
2.1.2 Roller swing arm, right 1
2.1.3 Roller swing arm, left 1
2.1.4 Emergency egress device (inside) 1
2.1.5 Bowden cable, emergency egress 1
device (inside)
2.1.6 Emergency egress device 1
(outside)
2.1.7 Bowden cable, emergency egress 1
device (outside)
2.1.8 Doorleaf, right 1
2.1.9 Doorleaf, left 1
2.1.10 Lock box 1
2.1.11 Light barrier 1
2.1.12 Control unit 1
2.2 Ramp 2
3 Pneumatic and 1
braking system
3.1 Production/treatment air 1
group
3.2 Brake devices group 1
3.3 Passenger alarm brake 1
3.4 Main reservoir 1
IEC 662/10
Figure A.4 – Example of structure using the tree breakdown chart for an EMU
(Electrical Multiple Unit) coach
– 64 – TR 62278-3 © IEC:2010(E)
4 Lighting system 1
4.1 Compartment lights 1
5 Fittings 1
5.1 Compartment fittings 1
5.1.1 Passenger seat 37
5.1.2 Foldable seat 12
5.1.3 Manual curtain 12
5.1.4 Dresshanger (set) 1
5.1.5 Luggage rack (set) 1
5.1.6 Hand rails (set) 1
5.1.7 Litter box 1
5.1.8 Fire extinguisher 1
6 Automatic fire 1
extinguishing
7 Compart air 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
conditioning
7.1 Ventilation 1
7.2 Cooling 1
7.3 Heating 1
7.4 Heaters 45
8 Service functions 1
8.1 Passenger information 1
system
8.1.1 Loudspeaker 10
8.1.2 Emergency speech unit 5
8.1.3 Internal information display 2
8.1.4 External side display 2
9 Toilet 1
9.1 Vacuum flush toilet system 1
9.2 Water level sensor (Max and 2
Min)
9.3 Command button 1
9.4 Photoelectric sensor 2
9.5 Double contact lighting 2
button
9.6 Piezoresistive sensor 1
9.7 Contact probe for liquid level 1
contouring
IEC 663/10
10 Electrical equipment 1
10.1 Auxiliary electrical energy 1
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
10.1.1 LV and MV contactors, relay 1
contactors, fuses, automatic circuit
breaker
IEC 664/10
Bibliography
IEC 60300-3-3, Dependability management – Part 3-3: Application guide – Life cycle costing
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
EN 15380, Railway Applications – Designation system for railway vehicles
EN 15380-2, Railway Applications – Designation system for railway vehicles – Part 2: Product
groups
___________
___________
1 In preparation.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
LICENSED TO MECON LIMITED - RANCHI/BANGALORE,
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
3, rue de Varembé
PO Box 131
CH-1211 Geneva 20
Switzerland
Tel: + 41 22 919 02 11
Fax: + 41 22 919 03 00
[email protected]
www.iec.ch