ICAEW MI - Question Bank
ICAEW MI - Question Bank
Management
Information
Question Bank
For exams in 2022
icaew.com
Management Information
The Institute of Chartered Accountants in England and Wales
ISBN: 978-1-5097-3899-1
Previous ISBN: 978-1-5097-3366-8
e-ISBN: 978-1-5097-3996-7
First edition 2007
Fifteenth edition 2021
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted in any form or by any means, graphic, electronic or
mechanical including photocopying, recording, scanning or otherwise, without the
prior written permission of the publisher.
The content of this publication is intended to prepare students for the ICAEW
examinations, and should not be used as professional advice.
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library.
Contains public sector information licensed under the Open Government Licence
v3.0.
Originally printed in the United Kingdom on paper obtained from traceable,
sustainable sources.
© ICAEW 2021
Contents
The following questions are exam-standard. Unless told otherwise, these questions are the style,
content and format that you can expect in your exam.
Title Page
Question Answer
6 Budgeting 51 213
You need to practise a wide variety of questions in order to be able to identify and apply relevant
technical knowledge and skills to analyse a specific problem. Some questions might require you to
select appropriate decisions based on financial and non-financial data. You need to be able to
recognise which techniques are required to answer the requirement (for example, limiting factor
techniques, inventory valuation techniques etc).
You should get used to analysing your performance in the questions you attempt in order to ensure
you understand why the correct answer is indeed correct. This will help you to identify
inconsistencies and contradictory information the next time you attempt questions from the same
area, so that you are prepared for the exam.
2 Certain types of income and cost are of no interest to the cost accountant.
Requirement
An example of such income or cost is
A indirect labour
B purchase of raw materials
C dividends received
D rent paid on a factory
LO 1a
4 Which of the following costs would not be the concern of the supervisor of a production
department?
A Material costs
B Labour costs
C Maintenance costs for a machine
D Lease payments on a machine
LO 1a
5 A hospital has total costs of £1 million for 20X1. During 20X1, 200,000 patients were treated and
doctors were paid £500,000.
Requirement
What is the most appropriate cost per patient for the hospital to use?
A £0.20
B £2.50
C £5.00
D £7.50
LO 1b
Unavoidable non-productive time is 20% of productive time, and is paid £4 per hour.
Operatives are paid £3.60 per unit of shoe Type A produced and £6 per unit of shoe Type B.
Requirement
What is the monthly cost of operatives’ wages in the factory?
A £13,920
B £33,960
C £36,744
D £50,664
LO 1b
7 If a sales representative is paid a basic salary plus commission for each sale made, this wage cost is
best described as
A a semi-variable cost
B a fixed cost
C a variable cost
D a production cost
LO 1b
8 Prime cost is
A the total of all direct costs
B the total of all costs incurred in manufacturing a product
C the same as the fixed cost of a cost unit
D any cost which does not vary with changes in output levels
LO 1b
9 A cost which contains both fixed and variable components, and so is partly affected by changes in
the level of activity is known as
A a direct cost
B a variable cost
C an indirect cost
D a semi-variable cost
LO 1b
10 Which of the following costs are fixed per unit, but change in total, as production levels change?
A Variable costs
B Direct costs
C Fixed costs
D Step costs
11 If an assembly line supervisor is paid a salary of £100 each week and an additional £0.10 for every
unit of production made in the week, this wage could be described as
A a semi-variable cost
B a fixed cost
C a variable cost
D a step cost
LO 1b
12 A company has a photocopier for which a fixed rental is payable up to a certain number of copies
each period. If the number of copies exceeds this amount, a constant charge per copy is made for all
subsequent copies during that period.
Requirement
Which of the following graphs depicts the cost described?
Graph 1
Total
cost
Level of activity
Graph 2
Total
cost
Level of activity
Graph 3
Total
cost
Level of activity
Level of activity
A Graph 1
B Graph 2
C Graph 3
D Graph 4
LO 1b
13 A factory making soft toys uses a particular machine on each production line. Each machine costs
£1,000 per month to hire. Each production line can make up to 100 toys per month.
Requirement
Which of the following best describes the cost of hiring the machines?
A A step cost
B A variable cost
C A fixed cost
D A semi-variable cost
LO 1b
14 The annual salary paid to a business’s financial accountant would best be described as
A a variable administrative cost
B a fixed production cost
C part of prime cost
D a fixed administrative cost
LO 1b
Level of activity
Requirement
To which of the following costs does the graph correspond?
A Electricity bills made up of a standing charge and a variable charge
B Bonus payments to employees when production reaches a certain level
C Sales representatives’ commissions payable per unit up to a maximum amount of commission
D Bulk discounts on purchases, the discount being given on all units purchased
LO 1b
1400
1200
1000
800
600
400
200
0
0 20 40 60 80
Requirement
In the graph above, the x-axis represents volume of output, and the y-axis represents total costs.
Which of the following could explain the shape of the graph?
A Fixed costs = 500. Variable costs per unit are constant until output is 30, then additional costs
per unit are higher.
B Fixed costs = 500. Variable costs per unit are constant until output is 30, then all costs per unit
(from the first unit onwards) are higher.
C Fixed costs cannot be determined, because the two parts of the line will intersect the y-axis at
different points. Variable costs per unit are constant until output is 30, then additional costs per
unit are higher.
D Fixed costs cannot be determined, because the two parts of the line will intersect the y-axis at
different points. Variable costs per unit are constant until output is 30, then all costs per unit
(from the first unit onwards) are higher.
LO 1b
19 Which of the following would be most useful for monitoring and controlling the costs incurred by a
freight transport organisation?
A Cost per tonne carried
B Cost per kilometre travelled
C Cost per driver hour
D Cost per tonne-kilometre
LO 1a
A The line with the constant upward slope represents fixed costs; D represents variable cost per
unit
B The line with the constant upward slope represents variable costs; D represents fixed costs
C The line with the constant upward slope represents total costs; D represents fixed costs
D The line with the constant upward slope represents total costs; D represents variable cost per
unit
LO 1b
Q
0 Output (level of activity)
A Total fixed costs fall after production reaches Q, but variable costs per unit increase.
B Fixed costs are constant until production reaches Q after which fixed costs step up to a higher
level.
C Variable costs per unit are constant until output reaches Q after which all production (from the
first unit onwards) incurs higher variable costs per unit.
D Variable costs per unit are constant until output reaches Q after which further production incurs
higher variable costs per unit.
LO 1b
26 Adam is responsible for preparing a monthly analysis of total department costs for the Managing
Director of XYZ. Adam’s boss, the Department Manager, has asked Adam to exclude a number of
costs from the monthly analysis to ‘give a better impression’ of the department, and has threatened
to start disciplinary proceedings against Adam for poor work if he fails to do so.
Requirement
Which threat does this represent?
A Familiarity
B Self-interest
C Intimidation
D Self-review
LO 5a
28 Which of the following ICAEW fundamental principles means not allowing bias or conflict of interest?
A Objectivity
B Competence
C Integrity
D Professional behaviour
LO 5a
3 Wage payments for idle time of direct workers within a production department are classified as
A direct labour cost
B prime cost
C administration overhead
D factory overhead
LO 1c
4 Grant Leeve is an assembly worker in the main assembly plant of Gonnaway Co.
Details of his gross pay for the week are as follows.
Basic pay for normal hours worked: 38 hours at £5 per hour £190
Overtime: 8 hours at time and a half £60
Gross pay £250
Although he is paid for normal hours in full, Grant had been idle for 10 hours during the week
because of the absence of any output from the machining department.
Requirement
The indirect labour costs that are included in his total gross pay of £250 are
A £20
B £50
C £70
D £110
LO 1c
5 Which of the following would be classified as indirect costs for a food product manufacturer?
(1) Food label on a tin of beans
6 A small engineering company that makes generators specifically to customers’ own designs has had
to purchase some special tools for a particular job. The tools will have no further use after the work
has been completed and will be scrapped.
Requirement
Which of the following options is the correct cost classification for these tools?
A Variable production overheads
B Fixed production overheads
C Indirect expenses
D Direct expenses
LO 1c
9 A shop carries out repairs on customers’ electrical items, eg, televisions, DVD players.
Requirements
From the point of view of costing individual repair jobs, identify the most appropriate description for
each cost.
Repair person paid a fixed wage per week
A Direct and variable
B Direct and fixed
10 A company pays £1 per unit as a royalty to the designer of a product which it manufactures and sells.
Requirement
When costing units of the company’s product, the royalty charge is classified as a
A direct expense
B production overhead
C administrative overhead
D selling overhead
LO 1c
Requirement
The value of the issue of materials to production is
A £220,000
B £225,000
C £230,000
D £270,000
LO 1c
12 Which three of the following are recognised and possibly acceptable methods of valuing inventory?
A First in, Last out (FILO)
B First in, First out (FIFO)
C Last in, First out (LIFO)
D Future anticipated cost
E Standard cost
LO 1c
Requirement
Using the FIFO valuation method, what was the cost of the units of geronimo sold on 24 February?
A £68,160
B £68,670
C £69,960
D £93,720
LO 1c
14 A wholesaler had an opening inventory of 750 units of product A valued at £80 each on 1 February.
The following receipts and sales were recorded during February.
Requirement
Using the LIFO valuation method (to the nearest £), what was the gross profit earned from the
product A sold on 24 February?
A £17,040
B £23,760
C £69,960
D £93,720
LO 1c
15 A wholesaler had an opening inventory of 330 units of mavis valued at £75 each on 1 February.
The following receipts and sales were recorded during February.
Requirement
Using the cumulative weighted average cost method of valuation, what was the cost of the mavis
sold on 24 February?
A £33,696
B £34,560
C £35,280
D £38,880
LO 1c
17 At the beginning of week 12 there were 500 units of component J held in the stores. 200 of these
components had been purchased for £6.25 each in week 11 and 300 had been purchased for £6.50
each in week 10.
On day 3 of week 12 a further 150 components were received into stores at a purchase cost of £6.60
each.
The only issue of component J occurred on day 4 of week 12, when 90 units were issued to
production.
Requirement
Using the FIFO valuation method, what was the value of the closing inventory of component J at the
end of week 12?
A £585
B £594
C £3,596
D £3,605
LO 1c
18 In a period of falling prices, four students have recorded the cost of sales of commodity X. One
student has used the FIFO method of inventory valuation and one has used the LIFO method. The
other two students have used an average cost method, using the periodic and cumulative weighted
average basis respectively.
The gross profits recorded by the students were as follows:
Requirement
Which student was using the LIFO method of inventory valuation?
A Student A
B Student B
20 For many years Sunny has faced rising prices on his main raw material. He maintains inventories of
this material at a constant volume. He uses the FIFO method of inventory valuation.
Requirement
If he had used the LIFO method this would have resulted in
A higher cost of sales and lower inventory value
B higher cost of sales and higher inventory value
C lower cost of sales and lower inventory value
D lower cost of sales and higher inventory value
LO 1c
Requirements
At 31 March which of the following closing inventory valuations using FIFO is correct?
A £8,000
B £7,500
C £7,000
D £6,500
LO 1c
At 31 March which of the following closing inventory valuations using LIFO is correct?
E £6,500
F £7,000
22 With all average price systems where it is required to keep prices up to date, the average price must
be re-calculated
A each time an issue is made
B each accounting period
C each time a purchase is made
D each time an inventory count is carried out
LO 1c
Receipts Issues
Price per Price per
Date Units unit Value Units unit Value
£ £ £ £
1 June Opening inventory 100 5.00 500
3 June Receipts 300 4.80 1,440
5 June Issues 220
12 June Receipts 170 5.20 884
24 June Issues 300
Requirements
Using the cumulative weighted average price method of inventory valuation, the cost of the materials
issued on 5 June was
A £1,056
B £1,067
C £1,078
D £1,100
LO 1c
Using the cumulative weighted average price method of inventory valuation, the value of closing
inventory on 30 June was
E £248
F £250
G £251
H £260
LO 1c
24 A wholesaler buys and resells a range of items, one of which is the Kay. Each Kay is resold for £3 per
unit and opening inventory for June was 400 units valued at £1.80 per unit. The wholesaler
purchased a further 600 units on 10 June for £2.10 per unit, and sold 800 units on 25 June.
Requirements
What gross profit would be recorded for the sale of Kays during June, using the FIFO method of
inventory valuation?
2 Which of the following is a valid reason for calculating overhead absorption rates?
A To reduce the total overhead expenditure below a predetermined level
B To ensure that the total overhead expenditure does not exceed budgeted levels
C To attribute overhead costs to cost units
D To attribute overhead costs to cost centres
LO 1c
3 Which of the following is known as spreading common costs over cost centres on the basis of benefit
received?
A Overhead absorption
B Overhead apportionment
C Overhead allocation
D Overhead analysis
LO 1c
5 The following information is available for the two production departments (machining and assembly)
and one service department (the canteen) at Wilmslow.
Requirement
After reapportionment of the service cost centre costs, what will be the overhead cost of the
machining department cost centre?
A £3,300
B £17,750
C £18,000
6 The works manager of a company is fully occupied in running the production lines in the factory. The
logistics manager spends some time on production and some time organising distribution.
How would their salaries be dealt with when calculating a fixed overhead absorption rate for the
factory?
Requirements
Works manager
A Allocated to factory
B Apportioned to factory
Logistics manager
C Allocated to factory
D Apportioned to factory
LO 1c
7 The following extract of information is available concerning the four cost centres of EG Limited.
Service cost
Production cost centres centre
Machinery Finishing Packing Canteen
Number of direct employees 7 6 2 –
Number of indirect employees 3 2 1 4
Overhead allocated and
apportioned £28,500 £18,300 £8,960 £8,400
The overhead cost of the canteen is to be re-apportioned to the production cost centres on the basis
of the number of employees in each production cost centre.
Requirement
After the re-apportionment, the total overhead cost of the packing department, to the nearest £, will
be
A £1,200
B £9,968
C £10,080
D £10,160
LO 1c
8 Which three of the following statements on the determination of overhead absorption rates are
correct?
A Costs can be allocated where it is possible to identify which department caused them.
B Supervisors’ salaries are likely to be apportioned rather than allocated.
C Costs need to be apportioned where they are shared by more than one department.
D There is no need for a single product company to allocate and apportion overheads in order to
determine overhead cost per unit.
E Apportionment always produces the correct result.
LO 1c
Overheads for the period are £30,000 and they are absorbed on the basis of labour hours.
Requirement
What is the fixed overhead cost absorbed by a unit of Product B?
A £30.00
B £5.00
C £7.20
D £1.20
LO 1c
11 Budgeted information relating to two departments in JP Ltd for the next period is as follows.
Individual direct labour employees within each department earn differing rates of pay, according to
their skills, grade and experience.
Requirements
What is the most appropriate production overhead absorption rate for department 1?
A 40% of direct material cost
B 200% of direct labour cost
C £10 per direct labour hour
D £0.60 per machine hour
What is the most appropriate production overhead absorption rate for department 2?
E 50% of direct material cost
F 18% of direct labour cost
G £0.72 per direct labour hour
H £60 per machine hour
12 The following information is recorded in the machinery department relating to activity levels and
overheads in period 1.
13 Which of the following statements about overhead absorption rates are true?
(1) They are usually determined in advance for each period.
(2) They are used to charge overheads to products.
(3) They are normally based on actual data for each period.
(4) They are used to control overhead costs.
A (1) and (2) only
B (1), (2) and (4) only
C (2), (3) and (4) only
D (3) and (4) only
LO 1c
14 A product requires four hours of direct labour at £5.25 per hour, and requires direct expenses of
£53.50. In its production, it requires 24 minutes of complex welding.
Possible overhead absorption rates have been calculated to be £7.10 per direct labour hour or
£41.50 per welding machine hour.
Requirement
Using the direct labour hour basis of overhead absorption, calculate to the nearest penny the total
product cost.
A £81.90
B £91.10
C £102.90
D £119.50
LO 1c
15 Lerna Ltd produces hydras in three production departments and needs to apportion budgeted
monthly overhead costs between those departments. Budgeted costs are as follows.
Requirement
The total budgeted monthly overhead cost for Department C is
A £1,837.50
B £4,462.50
C £6,000.00
D £7,000.00
LO 1c
16 A company manufactures two products, J and K, in a factory divided into two production cost
centres, Primary and Finishing. In order to determine a budgeted production overhead cost per unit
of product, the following budgeted data are available.
Primary Finishing
Allocated and apportioned production overhead costs £96,000 £82,500
Direct labour minutes per unit
Product J 36 25
Product K 48 30
Budgeted production is 6,000 units of product J and 7,500 units of product K. Production overheads
are to be absorbed on a direct labour hour basis.
Requirement
The budgeted production overhead cost per unit for product K is
A £10.00
B £13.20
C £14.00
D £14.60
LO 1c
17 Which of the following statements about predetermined overhead absorption rates are true?
(1) Using a predetermined absorption rate avoids fluctuations in unit costs caused by abnormally
high or low overhead expenditure or activity levels.
18 Bumblebee Co absorbs production overhead costs on a unit basis. For the year just ended,
Bumblebee Co’s production overhead expenditure was budgeted at £150,000 but was actually
£148,000 while the budgeted activity level (production units) was 30,000 units and 29,000 units were
actually produced.
Requirement
Which of the following is true?
A Fixed overheads were under absorbed by £5,000, this being the difference between budgeted
expenditure and 29,000 units at £5 per unit.
B Fixed overheads were under absorbed by £5,000, this being the difference between budgeted
and actual production at £5 per unit.
C Fixed overheads were over absorbed by £3,000, this being partly the difference between
budgeted and actual expenditure and partly the production shortfall of 1,000 units.
D Fixed overheads were under absorbed by £3,000, this being partly the difference between
budgeted and actual expenditure and partly the production shortfall of 1,000 units.
LO 1c
Production department Z
Budgeted allocated overhead expenses £61,500
Budgeted service department apportionment £42,000
Budgeted machine capacity (hours) ?
Pre-determined absorption rate per machine hour ?
Actual machine utilisation (hours) 10,000
Over/(under) absorption of overhead £(11,500)
21 The finishing department has budgeted labour hours of 3,250 and budgeted overhead costs of
£14,950.
The actual labour hours were 3,175 and actual overheads were £14,810.
Requirement
The overheads for the period were
A under-absorbed by £140
B over-absorbed by £140
C under-absorbed by £205
D over-absorbed by £205
LO 1c
22 A company absorbs overheads on a machine hour basis. Actual machine hours were 20,000, actual
overheads were £480,000 and there was over absorption of overheads of £95,000.
Requirement
What is the overhead absorption rate?
A £19.25 per unit
B £19.25 per hour
C £28.75 per unit
D £28.75 per hour
LO 1c
23 Budgeted and actual data for the year ended 31 December 20X1 is shown in the following table.
Budget Actual
Production (units) 5,000 4,600
Fixed production overheads £10,000 £9,500
Sales (units) 4,000 4,000
24 Budgeted overheads for a period were £340,000. At the end of the period the actual labour hours
worked were 21,050 hours and the actual overheads were £343,825.
Requirement
If overheads were over absorbed by £14,025, how many labour hours were budgeted to be worked?
A 20,000
B 20,225
C 21,050
D 21,700
LO 1c
25 The budgeted absorption rate for variable production overhead in department X of Wiggipen Ltd’s
factory is £2.50 per direct labour hour and for fixed overhead is £4 per direct labour hour. Actual
direct labour hours worked fell short of budget by 1,000 hours.
Requirement
If expenditures for the actual level of activity were as expected for variable and fixed overheads, the
total under or over absorbed overhead for the period would be
A £4,000 under-absorbed
B £4,000 over-absorbed
C £6,500 under-absorbed
D £6,500 over-absorbed
LO 1c
26 AB produces two products, A and B. Budgeted overhead expenditure for the latest period was
£54,500. Overheads are absorbed on the basis of machine hours. Other data for the period are as
follows:
Product A Product B
Units Units
Actual results:
Opening inventory 400 700
Sales 1,800 2,400
Closing inventory 500 500
Production 1,900 2,200
Budgeted results:
Production 1,700 2,500
Machine hours per unit 2 3
30 Which of the following would not normally result from the adoption of a JIT purchasing system?
A Closer relationship with the suppliers
B Lower levels of inventory
C Lower levels of receivables
D Better quality supplies obtained
LO 1d
33 Which two of the following items used in costing batches are normally contained in a typical batch
cost?
A Actual material cost
B Actual manufacturing overheads
C Absorbed manufacturing overheads
D Budgeted labour cost
LO 1d
34 Which of the following industries would not normally use process costing?
A The brewing industry
B The oil industry
C The steel industry
D The construction industry
LO 1d
36 A firm makes special assemblies to customers’ orders and uses job costing, with overheads being
absorbed based on direct labour cost.
The data for a period are:
Job B was completed during the period, during which actual overheads were the same as the
budgeted figure of £126,000.
Requirement
What was the approximate value of closing work-in progress at the end of the period?
A £58,575
B £101,675
C £217,323
D £227,675
LO 1d
37 For each of the following industries select the appropriate method to establish the cost of products.
Requirements
Oil refining
A Process
B Job/contract
C Batch
Clothing
D Process
E Job/contract
F Batch
Car Repairs
G Process
H Job/contract
I Batch
£ per unit
Variable materials 9.80
Variable labour 8.70
Production overheads
Variable 1.35
Fixed 9.36
Selling and distribution overheads
Variable 7.49
Fixed 3.40
Total cost 40.10
Requirement
In a marginal costing system, the value of a closing inventory of 4,300 units of product MC will be
A £85,355
B £117,562
C £125,603
D £172,430
LO 1c
Product S Product T
Variable labour cost per unit £60 £48
Other variable production costs per unit £70 £50
Budgeted production units 3,400 4,000
Labour hours 17,000 16,000
The value of the closing inventory of product S using absorption costing was £65,000.
Requirement
If marginal costing had been used the value of this inventory would have been
A £52,000
3 Ticktock Ltd makes clocks with a selling price of £50 per clock. Budgeted production and sales
volume is 1,000 clocks per month. During September 1,000 clocks were made and 800 clocks were
sold. There was no opening inventory.
The variable cost per clock is £25. Fixed costs in September were, as budgeted, £5,000.
Requirement
Using marginal costing the contribution and profit for September would be calculated as
A Contribution: £25,000, Profit: £20,000
B Contribution: £20,000, Profit: £15,000
C Contribution: £20,000, Profit: £16,000
D Contribution: £25,000, Profit: £16,000
LO 1c
4 Which three of the following statements concerning marginal costing are true?
A Marginal costing is an alternative method of costing to absorption costing.
B Contribution is calculated as sales revenue minus fixed cost of sales.
C Closing inventories are valued at full production cost.
D Fixed costs are treated as a period cost and are charged in full to the income statement of the
accounting period in which they are incurred.
E Marginal cost is the cost of a unit which would not be incurred if that unit were not produced.
LO 1c
5 Which two of the following statements concerning marginal costing systems are true?
A Such systems value finished goods at the variable cost of production.
B Such systems incorporate fixed overheads into the value of closing inventory.
C Such systems necessitate the calculation of under- and over-absorbed overheads.
D Such systems write off fixed overheads to the income statement in the period in which they were
incurred.
LO 1c
6 A company budgets during its first year of operations to produce and sell 15,900 units per quarter of
its product at a selling price of £24 per unit.
Budgeted costs are as follows:
£ per unit
Variable production costs 8.50
Fixed production costs 2.50
Variable selling costs 6.00
In the first quarter the unit selling price, variable unit cost and expenditure on fixed production costs
were as budgeted. The sales volume was 16,000 units and closing inventory was 400 units.
7 Which of the following statements about profit measurement under absorption and marginal costing
is true (assuming unit variable and fixed costs are constant)?
A Profits measured using absorption costing will be higher than profits measured using marginal
costing.
B Profits measured using absorption costing will be lower than profits measured using marginal
costing.
C Profits measured using absorption costing will be either lower or higher than profits measured
using marginal costing.
D Profits measured using absorption costing may be the same as, or lower than, or higher than
profits measured using marginal costing.
LO 1c
8 If the number of units of finished goods inventory at the end of a period is greater than that at the
beginning, marginal costing inventory will result in (assuming unit variable and fixed costs are
constant)
A less operating profit than the absorption costing method
B the same operating profit as the absorption costing method
C more operating profit than the absorption costing method
D more or less operating profit than the absorption costing method depending on the ratio of
fixed to variable costs
LO 1c
9 Adams Ltd’s budget for its first month of trading, during which 1,000 units are expected to be
produced and 800 units sold, is as follows:
£
Variable production costs 95,500
Fixed production costs 25,800
£
Variable production cost of boats 45,000
Fixed production costs 30,000
Production cost of 750 boats 75,000
Closing inventory of 250 boats (25,000)
Production costs of 500 boats sold 50,000
11 A company produces a single product for which cost and selling price details are as follows:
Last period, 8,000 units were produced and 8,500 units were sold. The opening inventory was 3,000
units and profits reported using marginal costing were £60,000.
Requirement
The profits reported using an absorption costing system would be
A £47,500
B £57,500
C £59,500
D £62,500
LO 1c
Units £
Sales 1,200 24,000
Opening inventory 500
Production 1,000
1,500
Closing inventory (300)
Sold 1,200
Marginal cost per unit £15 (18,000)
Contribution 6,000
Fixed overhead (7,000)
Loss (1,000)
For absorption costing purposes, the fixed overhead absorption rate is set at £7 per unit for 20X8.
Requirement
If absorption costing were to be used in inventory valuation throughout 20X8, what would the profit
(or loss) be for 20X8?
A £400 loss
B £400 profit
C £2,400 profit
D £2,400 loss
LO 1c
13 A company had opening inventory of 48,500 units and closing inventory of 45,500 units. Profits
based on marginal costing were £315,250 and on absorption costing were £288,250.
Requirement
What is the fixed overhead absorption rate per unit?
A £5.94
B £6.34
C £6.50
D £9.00
LO 1c
14 In March, a company had a marginal costing profit of £78,000. Opening inventories were 760 units
and closing inventories were 320 units. The company is considering changing to an absorption
costing system.
Requirement
What profit would be reported for March, assuming that the fixed overhead absorption rate is £5 per
unit?
A £74,200
B £75,800
C £76,400
15 When comparing the profits reported under marginal and absorption costing when the levels of
inventories increased (assuming unit variable and fixed costs are constant)
A absorption costing profits will be lower and closing inventory valuations higher than those under
marginal costing
B absorption costing profits will be lower and closing inventory valuations lower than those under
marginal costing
C absorption costing profits will be higher and closing inventory valuations lower than those under
marginal costing
D absorption costing profits will be higher and closing inventory valuations higher than those
under marginal costing
LO 1c
16 Which two of the following statements are advantages of marginal costing as compared with
absorption costing?
A It complies with accounting standards
B It ensures the company makes a profit
C It is more appropriate for short-term decision-making
D Fixed costs are treated in accordance with their nature (ie, as period costs)
E It is more appropriate when there are strong seasonal variations in sales demand
LO 1c
17 When comparing the profits reported under marginal and absorption costing when the levels of
inventories decreased (assuming unit variable and fixed costs are constant)
A absorption costing profits will be lower and closing inventory valuations higher than those under
marginal costing
B absorption costing profits will be lower and closing inventory valuations lower than those under
marginal costing
C absorption costing profits will be higher and closing inventory valuations lower than those under
marginal costing
D absorption costing profits will be higher and closing inventory valuations higher than those
under marginal costing
LO 1c
Machining Assembly
Fixed overhead costs £120,000 £72,000
Labour hours per unit: Pye 0.5 hours 0.20 hours
Tan 1.0 hours 0.25 hours
Budgeted production is 4,000 units of Pye and 4,000 units of Tan (8,000 units in all) and fixed
overheads are to be absorbed by reference to labour hours.
Requirement
What is the budgeted fixed overhead cost of a unit of Pye?
A £18
B £20
C £24
D £28
LO 1c
20 Norbury plc has just completed its first year of trading. The following information has been collected
from the accounting records:
£
Variable cost per unit:
Manufacturing 6.00
Selling and administration 0.20
Fixed costs:
Manufacturing 90,000
Selling and administration 22,500
Production was 75,000 units and sales were 70,000 units. The selling price was £8 per unit
throughout the year.
Requirement
Calculate the net profit for the year using absorption costing.
A £13,500
B £19,500
C £21,000
D £22,500
LO 1c
General overheads are absorbed into product costs at a rate of 10% of total production cost.
Requirement
If a 20% return on sales is required from product X, its selling price per unit should be
A £271.45
B £282.31
C £286.66
D £298.60
LO 1e
2 A company manufactures two products for which budgeted details for the forthcoming period are as
follows:
Product L Product T
£ per unit £ per unit
Materials 6.00 9.00
Labour (£15 per hour) 30.00 22.50
Production overhead of £61,200 is absorbed on a labour hour basis. Budgeted output is 4,000 units
of product L and 6,000 units of product T.
The company adds a mark up of 20% to total production cost in order to determine its unit selling
prices.
Requirement
The selling price per unit of product L is
A £47.52
B £51.84
C £54.00
D £61.56
LO 1e
3 Print Ltd manufactures ring binders which are embossed with the customer’s own logo. A customer
has ordered a batch of 300 binders. The following data illustrate the cost for a typical batch of 100
binders:
£
Variable materials 30
Wages (paid on a per binder basis) 10
Print Ltd absorbs production overhead at a rate of 20% of variable wages cost. A further 5% is added
to the total production cost of each batch to allow for selling, distribution and administration
overhead.
Print Ltd requires a profit margin of 25% of sales value.
Requirement
The selling price for a batch of 300 binders should be
A £189.00
B £193.20
C £201.60
D £252.00
LO 1e
4 A firm makes special assemblies to customers’ orders and uses job costing.
The data for a period are:
The budgeted overheads for the period were £126,000 and these are absorbed on the basis of
labour cost.
Job B was completed and delivered during the period and the firm wishes to earn a 331/3% profit
margin on sales.
Requirement
What should be the selling price of job B?
A £69,435
B £75,523
C £84,963
D £258,435
LO 1e
5 An item priced at £90.68, including local sales tax at 19%, is reduced in a sale by 20%.
Requirement
The new price before sales tax is added is
A £58.76
B £60.96
C £72.54
D £76.20
6 Three years ago a retailer sold electronic calculators for £27.50 each. At the end of the first year he
increased the price by 5% and at the end of the second year by a further 6%. At the end of the third
year the selling price was £29.69 each.
Requirement
The percentage price change in Year 3 was a
A 2.7% decrease
B 3.0% increase
C 3.0% decrease
D 3.4% decrease
LO 1e
7 At a sales tax rate of 12%, an article sells for £84, including sales tax.
Requirement
If the sales tax rate increases to 17.5%, the new selling price will be
A £75.00
B £86.86
C £88.13
D £88.62
LO 1e
8 A greengrocer sells apples either for 45p per kg, or in bulk at £9 per 25 kg bag.
Requirement
The percentage saving per kg from buying a 25 kg bag is
A 9%
B 11.25%
C 20%
D 25%
LO 1e
9 A skirt which cost a clothes retailer £50 is sold at a profit of 25% on the selling price.
Requirement
The profit is therefore
A £12.50
B £16.67
C £62.50
D £66.67
LO 1e
11 A company calculates the prices of jobs by adding overheads to the prime cost and then adding
30% to total costs as a profit mark up. Job number Y256 was sold for £1,690 and incurred overheads
of £694.
Requirement
What was the prime cost of the job?
A £489
B £606
C £996
D £1,300
LO 1e
12 A company prices its product at the full cost of £4.75 per unit plus 70%. A competitor has just
launched a similar product selling for £7.99 per unit. The company wishes to change the price of its
product to match that of its competitor.
Requirement
The product mark up percentage should be changed to
A 1.1%
B 1.8%
C 40.6%
D 68.2%
LO 1e
13 Details from a retailer’s records concerning product D for the latest period are as follows.
£
Sales revenue 60,000
Purchases 40,000
Opening inventory 12,000
Closing inventory 2,000
Requirement
The profit margin for product D is
A 16.7%
B 20.0%
C 33.3%
D 50.0%
LO 1e
15 A company determines its selling prices by adding a mark up of 100% to the variable cost per unit.
If the selling price is increased by 50%, the quantity sold each period is expected to reduce by 40%
but the variable cost per unit will remain unchanged.
Requirement
Which of the following statements is correct?
A The total revenue will increase and the total contribution will increase.
B The total revenue will increase and the total contribution will decrease.
C The total revenue will decrease and the total contribution will increase.
D The total will decrease and the total contribution will decrease.
LO 1e
A 2% increase in selling price would not alter the number of units sold each period but the profit
would increase by £5,000.
Requirement
The current selling price per unit is
A £0.08
B £10.00
C £12.50
D £12.75
LO 1e
17 A contract is agreed between a supplier and a buyer. The contract will take four weeks to complete
and the price to be charged will be agreed upon at the point of sale as the actual costs incurred plus
an agreed percentage mark up on actual costs. The buyer is to be granted four weeks credit from the
point of sale.
Requirement
Which of the following best describes how the risk caused by inflation will be allocated between the
supplier and the buyer?
A The supplier and the buyer will each bear some of the inflation risk but not necessarily equally.
19 The following data relate to Bailey plc, a manufacturing company with several divisions. Division X
produces a single product which it sells to division Y and also to external customers.
20 Which two of the following criteria should be fulfilled by a transfer pricing system?
A Should encourage dysfunctional decision-making
B Should encourage output at an organisation-wide profit-maximising level
C Should encourage divisions to act in their own self interest
D Should encourage divisions to make entirely autonomous decisions
E Should enable the realistic measurement of divisional profit
LO 1f
22 Division P produces plastic mouldings, all of which are used as components by Division Q. The cost
schedule for one type of moulding, item 103, is shown below.
Requirement
The transfer price per unit of item 103 transferred to Division Q using both of the transfer pricing
methods listed above is:
A (1): £12.60; (2): £9
B (1): £12.60; (2): £19
C (1): £21.00; (2): £9
D (1): £21.00; (2): £19
LO 1f
23 A and B are two divisions of company C. A manufactures two products, the X and the Y. The X is sold
outside the company. The Y is sold only to division B at a unit transfer price of £410. The unit cost of
the Y is £370 (variable cost £300 and absorbed fixed overhead £70). Division B has received an offer
from another company to supply a substitute for product Y at a price of £330 per unit. Assume
Division A and B have spare operating capacity.
Requirement
Which of the following statements is correct with regard to the offer from the other company?
A The offer is not acceptable from the point of view of company C and the manager of Division B
will make a sub-optimal decision.
B The offer is not acceptable from the point of view of company C and the manager of Division B
will not make a sub-optimal decision.
C The offer is acceptable from the point of view of company C and the manager of Division B will
make a sub-optimal decision.
D The offer is acceptable from the point of view of company C and the manager of Division B will
not make a sub-optimal decision.
LO 1f
25 In a contract to sell a commodity the selling price is agreed between the supplier and the buyer to
be the actual costs incurred by the supplier plus a profit mark-up using a fixed percentage on actual
costs. No credit period is offered by the supplier.
Requirement
Which of the following best describes how the risk caused by inflation will be allocated between the
supplier and the buyer?
A The supplier and the buyer will each bear some of the inflation risk but not necessarily equally
B Only the supplier will bear the inflation risk
C Only the buyer will bear the inflation risk
D The supplier and the buyer will each bear equal amounts of the inflation risk
LO 1e
26 F and G are two divisions of a company. Division F manufactures one product, Rex. Unit production
cost and the market price are as follows:
£
Variable materials 24
Labour 16
Variable fixed overhead 8
48
Prevailing market price £64
Product Rex is sold outside the company in a perfectly competitive market and also to division G. If
sold outside the company, Rex incurs variable selling costs of £8 per unit.
Requirement
Assuming that the total demand for Rex is more than sufficient for division F to manufacture to
capacity, what is the price per unit (in round £s) at which the company would prefer division F to
transfer Rex to division G?
A £64
B £56
C £40
D £48
27 A company estimates indirect costs to be 40% of direct costs and it sets its selling prices to recover
the full cost plus 50%.
Requirement
What percentage represents the mark-up on direct costs that would give rise to the same selling
price as using the method described above?
A 90%
B 110%
C 190%
D 210%
LO 1e
28 The master budget for Serse Ltd, a single-product firm, for the current year is as follows:
£ £
Sales 480,000
Serse Ltd has substantial excess production capacity. A sales enquiry has been received, late in the
year, which will increase sales and production for the year by 25% over budget.
The extra requirement for 5,000 tonnes of material will enable the firm to purchase 7,000 tonnes at a
discount of 5% on its normal buying price. The additional 2,000 tonnes will be used to complete the
year’s budgeted production.
Requirement
What price should Serse Ltd charge for the special order in order to earn the same budgeted net
profit for the year of £64,000?
A £83,500
B £100,500
C £82,500
D £101,500
LO 1e
29 Gabba sets up in business to clean carpets. She will charge £30 per carpet cleaned and estimates the
direct variable and fixed costs per carpet cleaned to be £9 and £6 respectively. She also estimates
her variable and fixed advertising costs per carpet cleaned to be £2 and £3 respectively.
Requirement
What is the contribution per carpet cleaned and the mark up on total costs?
A Contribution: £21; Mark-up: 50%
£ £
Sales of 1,200 units 600,000
Manufacturing costs:
Variable 216,000
Fixed 60,000
Selling costs:
Variable 132,000
Fixed 78,000
Administration costs (fixed) 36,000
(522,000)
Net profit 78,000
The company’s variable manufacturing cost per unit is now expected to increase by 10%, but all
other costs remain unchanged.
Requirement
Assuming an unchanged volume of sales, calculate the selling price per unit that would maintain the
contribution ratio.
A £531
B £733
C £550
D £518
LO 1e
31 Delta and Gamma are two divisions of a company. Delta manufactures two products X and Y. X is
sold outside the company. Y is sold only to division Gamma at a unit transfer price of £176. Unit costs
for product Y are:
£
Variable materials 60
Variable labour 40
Variable overhead 40
Fixed overhead 20
160
Division Gamma has received an offer from another company to supply a substitute for Y for £152
per unit.
Requirement
Assuming division Delta is only operating at 80% of capacity, if Gamma accepts the offer the effect
on profits will be
32 Delta and Gamma are two divisions of a company. Delta manufactures two products X and Y. X is
sold outside the company. Y is sold only to division Gamma at a unit transfer price of £176. Unit costs
for product Y are:
£
Variable materials 60
Variable labour 40
Variable overhead 40
Fixed overhead 20
160
Division Gamma has received an offer from another company to supply a substitute for Y for £152
per unit.
Requirement
Assuming division Delta can sell as much of Product X as it can produce and the unit profitability of X
and Y are equal, what will be the effect on profits if Gamma accepts the offer?
A Division Delta profit: No change; Overall company profit: Decrease
B Division Delta profit: Decrease; Overall company profit: No change
C Division Delta profit: No change; Overall company profit: Increase
D Division Delta profit: Increase; Overall company profit: No chance
LO 1f
33 A company currently sets its selling price at £10, which achieves a 25% mark-up on variable cost.
Annual production and sales volume is 100,000 units and annual fixed costs are £80,000.
Requirement
By how much would the selling price need to be increased in order to double profit if costs,
production and sales volume remain unchanged?
A 12%
B 17%
C 20%
D 25%
LO 1e
4 When preparing the master budget, which of the following tasks would normally be carried out first?
A Calculate the overhead absorption rate
B Establish the organisation’s long-term objectives
C Identify the principal budget factor
D Prepare the sales budget
LO 2d
9 For a company that does not have any production resource limitations, which of the following sets
out the correct sequence for budget preparation?
A Production budget, finished goods inventory budget, sales budget, then materials usage budget
B Sales budget, finished goods inventory budget, production budget, then materials usage
budget
C Sales budget, production budget, finished goods inventory budget, then materials usage
budget
D Sales budget, finished goods inventory budget, materials usage budget, then production
budget
LO 2d
10 Which two of the statements below correctly complete the following sentence?
The master budget
A will include a budgeted balance sheet and a budgeted income statement prepared on the
accruals basis
B will include a cash budget
C is usually prepared before the functional budgets
D details the timetable for the preparation of the various budgets
E includes the instructions for the completion of the budget forms and the responsibilities of the
personnel involved
LO 2e
12 A company is preparing its production budget for product Z for the forthcoming year.
Budgeted sales of product Z are 1,500 units. Opening inventory is 120 units and the company wants
to reduce inventories at the end of the year by 10%.
Requirement
The budgeted number of units of product Z to be produced is
A 1,392
B 1,488
C 1,500
D 1,512
LO 2d
13 Research Ltd purchases a chemical and refines it before onward sale. Budgeted sales of the refined
chemical are as follows.
Litres
January 40,000
February 50,000
March 30,000
(1) The target month-end inventory of unrefined chemical is 30% of the chemical needed for the
following month’s budgeted production.
(2) The targeted month-end inventory of refined chemical is 30% of next month’s budgeted sales.
Requirement
Calculate the budgeted purchases of unrefined chemical for January.
A 56,200 litres
B 49,750 litres
C 48,250 litres
D 43,300 litres
LO 2d
14 When preparing a material purchases budget, which of the following is the quantity to be
purchased?
A Materials required for production – opening inventory of materials – closing inventory of
materials
B Materials required for production – opening inventory of materials + closing inventory of
materials
C Opening inventory of materials + closing inventory of materials – materials required for
production
15 Barlow plc manufactures two products, Vip and Bip. It intends to produce 2,000 units of each product
in the next year to meet the sales budget.
Each Vip requires 2 kg of material Z and 1 kg of material Y and each Bip requires 3 kg of material Z
and 4 kg of material Y.
At present there are 200 kg of Z and 500 kg of Y in inventory.
Barlow plc intends to increase the inventory levels of these materials by the end of the year to 600 kg
of Z and 800 kg of Y.
Material Z costs £4 per kg and material Y costs £5 per kg.
Requirement
What is the total materials purchases for the next year?
A £86,900
B £90,000
C £93,100
D £96,400
LO 2d
16 A retailing company makes a gross profit of 25% on sales. The company plans to increase inventory
by 10% in June. The budgeted sales revenue for June is £25,000. Opening inventory on 1 June is
valued at £5,000.
Requirement
What are the budgeted inventory purchases for June?
A £18,250
B £19,125
C £19,250
D £25,500
LO 2d
17 Budgeted sales of X for December are 18,000 units. At the end of the production process for X, 10%
of production units are scrapped as defective. Opening inventories of X for December are budgeted
to be 15,000 units and closing inventories will be 11,400 units. All inventories of finished goods must
have successfully passed the quality control check.
Requirement
The production budget for X for December, in units, is
A 12,960
B 14,400
C 15,840
D 16,000
LO 2d
18 The quantity of material in the material purchases budget is greater than the quantity of material in
the material usage budget.
19 George has been asked by his bank to produce a budgeted income statement for the six months
ending on 31 March 20X4.
He forecasts that monthly sales will be £3,000 for October, £4,500 for each of November and
December and £5,000 per month from January 20X4 onwards.
Selling price is fixed to generate a margin on sales of 331/3%.
Overhead expenses (excluding depreciation) are estimated at £800 per month.
He plans to purchase non-current assets on 1 October costing £5,000, which will be paid for at the
end of December and are expected to have a five-year life, at the end of which they will possess a nil
residual value.
Requirement
The budgeted net profit for the six months ending 31 March 20X4 is
A £3,200
B £3,700
C £3,950
D £8,200
LO 2d
20 At the beginning of March 20X2, a company has an opening balance of £60,000 on its receivables
ledger. Sales of £160,000 have been budgeted for March and it is budgeted that 60% of these will
be settled in March after a cash discount of 2.5%.
Requirement
If 23% of the opening receivables are still outstanding at the end of March, what will be the
budgeted receivables figure at that date?
A £76,200
B £77,800
C £80,200
D £110,200
LO 2d
21 A retailing company budgets to maintain inventories at the end of each month which are sufficient to
meet the budgeted sales requirements for the following month. Two months’ credit will be received
from suppliers of inventory.
Budgeted sales, which earn a gross profit margin of 20% of sales value, are as follows:
£
January 28,300
February 26,100
March 33,800
Requirement
The budgeted balance sheet as at the end of March will show a payables balance of
A £47,920
B £51,592
C £59,900
D £64,490
LO 2d
£ £
Sales revenue (5,000 units) 120,000
Variable materials cost 24,000
Variable labour cost 32,500
Variable overhead 13,000
Fixed overhead 41,000
110,500
Budgeted net profit 9,500
The company’s management are considering a change in the materials specification. This would
reduce the materials cost per unit by 10%. The reduced product quality would necessitate a 2%
reduction in the selling price and the sales volume would fall by 5%.
Requirement
The revised budgeted net profit for the period would be
A £3,620
B £6,975
C £9,025
D £9,375
LO 2d
24 A company has recorded the following costs over the last six months.
Requirement
Using the high-low method, which of the following represents the total cost equation?
A Total cost = 61,250 + (1.25 × quantity)
B Total cost = 65,000 + (3 × quantity)
C Total cost = 65,000 + (1.25 × quantity)
D Total cost = 61,250 + (3 × quantity)
LO 2a
25 A company has recorded the following costs over the last four months.
Requirement
Using the high-low method, the expected cost of producing 950 units is
A £17,030
B £18,700
C £20,625
D £23,343
LO 2a
26 The following estimates of possible sales revenue and cost behaviour for a one-year period relate to
one of AB Company’s products:
The budgeted level of activity for the current year is 60,000 units, and fixed costs are incurred evenly
throughout the year.
There was no inventory of the product at the start of the first quarter, in which 16,500 units were
made and 13,500 units were sold. Actual fixed costs were the same as budgeted.
AB Company uses absorption costing. You may assume that sales revenue and variable costs per unit
are as budgeted.
Requirement
What is the value of the fixed production costs that were absorbed by the product in the first
quarter?
A £33,750
B £37,500
C £41,250
D £66,000
LO 2a
27 The following data have been extracted from the budget working papers of BL Ltd.
Requirement
The total fixed cost and variable cost per unit is
A Total fixed cost: £3,600; Variable cost per unit: £9.90
B Total fixed cost: £4,000; Variable cost per unit: £11.70
C Total fixed cost: £7,600; Variable cost per unit: £7.50
D Total fixed cost: £7,600; Variable cost per unit: £9.90
LO 2a
28 Which two of the following are underlying assumptions of forecasts made using regression analysis?
A A curvilinear relationship exists between the two variables
B The value of one variable can be predicted or estimated from the value of one other variable
C A perfect linear relationship between the two variables
D What has happened in the past will provide a reliable guide to the future
LO 2a
29 A company’s weekly costs (£C) were plotted against production level (P) for the last 50 weeks and a
regression line calculated to be C = 100 + 20P.
Requirement
Which of the following statements about the breakdown of weekly costs is true?
X
(b) Y
Requirement
Which of the following statements is correct?
A Diagram (a) represents perfect positive correlation; diagram (b) represents negative correlation.
B Diagram (b) represents perfect positive correlation; diagram (a) represents negative correlation.
C Diagram (a) represents perfect negative correlation; diagram (b) represents imperfect positive
correlation.
D Diagram (b) represents perfect negative correlation; diagram (a) represents perfect positive
correlation.
LO 2a
34 The correlation coefficient between advertising expenditure and sales revenue is calculated to be
0.85.
Requirement
Which of the following statements is true?
A There is a weak relationship between advertising expenditure and sales revenue.
B 85% of the variation in sales revenue can be explained by the corresponding variation in
advertising expenditure.
C 72% of the variation in sales revenue can be explained by the corresponding variation in
advertising expenditure.
D Sales revenue will increase by 85% more than advertising expenditure will increase
LO 2a
35 The linear relationship between advertising in thousands of pounds (X) and sales in tens of
thousands of pounds (Y) is given by Y = 5 + 2X.
Requirement
Which two of the following statements are correct?
A For every £1,000 spent on advertising, sales revenue increases by £50,000 on average.
B When nothing is spent on advertising the average level of sales is £50,000.
C For every £1,000 spent on advertising, sales revenue increases by £20,000 on average.
D When nothing is spent on advertising, the average level of sales is £20,000.
LO 2a
42 Three separate newly-formed companies are currently designing their budgetary planning and
control systems.
Company A will manufacture a wide range of products of varying flexibility. Some of the products
will be mass produced, others will be low volume. The degree of non-production support required
for each product differs widely.
Company B will manufacture a single product and has employed a specialist to manage each of its
production and non-production activities.
Company C will manufacture a small range of diverse products and the cost and revenue
responsibilities will differ for each product.
Requirements
Indicate which budget structure would be most appropriate for each organisation.
Product based budget
A Company A
B Company B
C Company C
Responsibility based budget
D Company A
E Company B
F Company C
Activity-based budget
G Company A
H Company B
I Company C
LO 2e
46 An extract from next year’s budget for a manufacturing company is shown below.
Month 3 Month 4
£
Closing inventory of raw
materials 22,000 12,000
The manufacturing cost of production is £116,000 in both Month 3 and Month 4. Materials costs
represent 40% of manufacturing cost.
Requirement
The budgeted material purchases for Month 4 are
A £36,400
B £42,400
C £46,400
D £56,400
LO 2d
47 You are given the following budgeted cost information for Verlaine plc for January.
Sales £120,000
Unit selling price £2
Gross profit 30% margin on sales
Opening inventory 6,000 units
Sales volumes are increasing at 20% per month and company policy is to maintain 10% of next
month’s sales volume as closing inventory.
Requirement
The budgeted cost of production for January is
A £84,000
B £85,680
C £120,000
D £122,400
LO 2d
49 Fashn Ltd runs a chain of fashion retail stores. A key element of its commercial success comes from
being able to identify customer trends, and responding to them, more quickly than its competitors.
Requirement
Which two of the following are potential sources of big data for Fashn Ltd?
A Online video clips of clothes being shared by customers
B Daily transactions records from stores
C Inventory records from the chain’s central warehouse
D Keywords from conversations about fashion on social media
E The number, and level, of discounts Fashn Ltd has to offer on its products
LO 2b
51 Teecee Ltd operates a chain of coffee shops. It has an interactive website where customers can leave
feedback, and has recently introduced a customer loyalty card that is swiped at the till whenever a
purchase is made. Teecee is keen to make use of this new data.
Requirement
Which two of the following are suitable uses of the data that is collected from Teecee’s website and
its customer loyalty cards?
A Understanding individual customer preferences
B Updating inventory records
C Analysing the take-up of targeted promotions
D Rewarding branch managers for the achievement of sales targets
LO 2b
52 The number of specialist data analytics firms has risen in recent years with the increase in the
collection of big data.
Requirement
Which two of the following explain this?
A Privacy concerns mean that it is prudent to give data to analytics firms who are better able to
protect it.
B Cybersecurity risks can be avoided by the use of data specialists.
C There is a lack of employees within the organisation with appropriate data analytics skills.
D Big data is often incorrect and data analysts are quicker to detect errors and inaccuracies.
E Traditional data management systems cannot readily process unstructured data.
LO 2b
55 Traditional budgeting methods are known to have problems in the modern business environment.
Requirements
Indicate which solution would be most appropriate for each problem.
Traditional methods are inflexible
A Big data analytics
B Rolling budgets
C Use of machine learning
Forecasts are inaccurate
D Big data analytics
E Rolling budgets
F Use of machine learning
Businesses have lost sight of what is important to customers
G Big data analytics
H Rolling budgets
I Use of machine learning
LO 2e
56 There is a constant, flat trend in the sales of Product HH. Using time series analysis, the quarterly
seasonal variations are as follows:
Quarter 1 2 3 4
57 What is the reason for seasonally adjusting the data in a time series?
A To calculate moving averages
B To estimate the seasonal variations
C To remove the cyclical variation
D To find the trend
2a
58 Product 43X is produced by Factory A in the south of the country and Factory B in the north of the
country. They each produce 5,000 units a month. The main production machine in the South is older
than the one in the North. The last 12 months’ data shows that the South consistently produces 25%
more faulty Product 43Xs per month than the North.
Requirement
Which of the following statements is true?
A The cause of the faulty products is the age of the machine.
B There is a correlation between the number of faulty products and the machine used.
C A confounding variable could not be the cause of the greater fault level.
D The reason for the higher number of faulty products in the south could be pure chance.
2c
59 Arnutt Ltd’s sales volume (Y) shows a trend described by the linear regression equation Y = 560 + 9X,
where X is the month number (with January 20X1 being month 1). The seasonal variation for April is
104% of the trend.
Requirement
What are the forecast sales for April in 20X2 (to the nearest whole unit)?
A 677
B 704
C 732
D 620
2a
60 Which of the following are necessary if forecasts obtained from a multiplicative time series analysis
are to be reliable?
(1) The trend must neither be increasing, nor decreasing.
(2) There must be no unforeseen events.
(3) The pattern of seasonal variation must continue as it has in the past.
A (3) only
B (2) and (3) only
62 TiMo Ltd has been monitoring the number of product defects for 18 months and has collected a
substantial amount of data. It has established that there is a coefficient of determination of 90%
between material cost and the number of product defects.
Requirement
Which two of the following statements are true?
A The coefficient of determination proves that variations in material cost cause variations in the
number of defects.
B Any correlation between material cost and the number of defects is likely to be because of
chance.
C If there is causation between material cost and the number of defects then there is also
correlation.
D There is a strong correlation between the cost of materials and the number of defects.
2c
63 In order to save time on design work, Great Adverts Ltd, an advertising agency, invested in a new
automated design system. This system enabled copywriters for adverts to design and format copy at
the same time, leaving the separate design team free to focus on larger and more complex projects.
The system was expensive to install and took a few years to implement, but was ready to test at the
end of 20X8. At this point, three copywriters were trained to use the system and tested it with a new
advertising campaign. Two of the copywriters found that it took more time than usual to complete
the work for a project of this size, whilst the third reported no change. Management concluded that
the new system successfully saved time for the design team without impacting the time that most
copywriters would spend on their projects. All copywriters were trained to use the system by the end
of 20X8.
Great Adverts Ltd is beginning to budget its copywriter time for 20X9 and management believes the
copywriters will take the same time for an average project as they did in 20X8.
Requirement
Which of the following statements is/are true?
(1) Zero-based budgeting can be used to help avoid anchoring.
(2) Based on the data available, management is displaying confirmation bias.
(3) The new system caused the two copywriters to take longer than usual to complete their work.
A (1), (2) and (3)
B (1) and (2) only
C (3) only
D (1) only
2c
765
764
763
762
761
760
1 June 1 July 1 August
Requirement
Which of the following statements are true?
(1) Mid-July to August was much wetter than an average month.
(2) Sales will be lower than average mid-July to August.
(3) Rainfall on 1st June was average for the time of year.
A (1) and (2) only
B (2) and (3) only
C (1) and (3) only
D (3) only
2c
65 Hollivy Ltd introduced a store loyalty card and analysed all sales data after a year. It noticed that the
loyalty card holders spent, on average, five times more per week than non-loyalty card holders. It
concluded that the loyalty card scheme was a success and budgeted to spend 25% more next year
on persuading customers to sign up for a loyalty card.
Requirement
Which of the following areas would not require more thought and professional scepticism?
A The data set
B The conclusion
C The data analysis
D The additional budget spend
2c
66 Sparrk Ltd uses artificial intelligence (AI) to help prepare sales budgets for its divisions in regions
across the country.
Requirement
Which two of the following can help reduce data bias in the AI system?
A Using training data from all areas of the country.
B Monitoring performance of the system against real data.
67 Monkie Ltd compared its advertising spend with its sales volumes for last year. It incorrectly
concluded that sales volumes are down because the advertising campaign was poor and sacked the
marketing director. It failed to account for the new competitor on the market that has lower sales
prices and higher-quality similar products.
Requirement
Which two types of bias could explain this?
A Self-selection
B Confirmation
C Survivorship
D Omitted variable
2c
Requirement
The closing cash balance for March is budgeted to be
A £5,800
B £12,450
C £17,750
D £18,250
LO 2f
3 A machine that was bought in January 20X1 for £44,000 and has been depreciated by £8,000 per
year, is expected to be sold in December 20X3 for £17,600.
Requirement
What is the net cash inflow or (outflow) that will appear in the cash budget for December 20X3?
A £9,000 inflow
B £15,200 inflow
C £17,600 inflow
D £17,600 outflow
LO 2f
£
April 40,000
May 30,000
June 20,000
July 25,000
How much should Jason budget to collect from customers during July?
A £19,750
B £20,000
C £22,000
D £26,000
LO 2f
5 Lotsa plc has budgeted that sales will be £101,500 in January 20X2, £580,500 in February, £215,000
in March and £320,500 in April.
Half of sales will be credit sales. 80% of customers are expected to pay in the month after sale, 15%
in the second month after sale, while the remaining 5% are expected to be bad debts.
Customers who pay in the month after sale can claim a 4% early settlement discount.
Requirement
What level of sales receipts should be shown in the cash budget for March 20X2 (to the nearest £)?
A £338,025
B £347,313
C £568,550
D £587,125
LO 2f
6 A company has a two-month receivables cycle. It receives in cash 45% of the total gross sales value in
the month of invoicing.
Bad debts are 7% of total gross sales value and there is a 10% discount for settling accounts within
30 days.
Requirement
What percentage of the first month’s sales will be received as cash in the second month?
A 38%
B 43%
C 48%
D 58%
LO 2f
8 A company anticipates that 10,000 units of product Z will be sold during August.
Each unit of Z requires two litres of raw material W.
Actual inventories as at 1 August and budgeted inventories as at 31 August are:
1 August 31 August
Product Z (units) 14,000 15,000
Raw materials W (litres) 20,000 15,000
Requirement
A litre of W costs £1.50. If the company pays for all purchases in the month of acquisition, what is the
payment for August purchases of W?
A £17,000
B £25,500
C £33,000
D £34,500
LO 2f
9 Sam is a trading company that holds no inventories. Each month the following relationships hold:
£
January 60,000
February 75,000
March 84,000
April 90,000
May 90,000
June 87,000
Bendy Ltd (Bendy) wishes to maintain inventory levels, as at the end of each month, to cover sales for
the following three months. Purchases are made at the beginning of each month, and suppliers are
to be paid after two months. Bendy will operate a 40% mark-up on costs.
Requirement
The payment to be made to suppliers in May is (to the nearest £)
A £52,200
B £62,143
C £64,286
D £87,000
LO 2f
Sales £520,000
Gross profit on sales 30%
Increase in trade payables over the month £15,000
Decrease in cost of inventory held over the month £22,000
Requirement
The budgeted payment to trade payables is
A £327,000
B £357,000
C £371,000
D £401,000
LO 2f
12 A company is preparing the budget for a product, and the following data has been provided:
Closing inventory in each month must be 50% of the next month’s sales. Suppliers are paid in the
month following purchase. The standard cost of materials is £4 per unit.
Requirement
What is the budgeted payment to suppliers in Month 3?
A £8,200
B £9,400
13 Each unit of product Zeta requires 3 kg of raw material and four direct labour hours. Material costs £2
per kg and the direct labour rate is £7 per hour.
The production budget for Zeta for April to June is as follows:
14 Aaron Products is considering the implementation of a revised receivables policy, which will result in
an increase in the average collection period from the current 60 days to 90 days. This is expected to
lead to a 20% increase in annual sales revenue, currently £960,000, resulting in additional inventories
and trade payables of £30,000 and £15,000 respectively. It is expected that all customers will take
advantage of the extended credit period.
Requirement
The net increase in working capital investment that would result from the change in policy, assuming
a 360-day year, is
A £31,000
B £95,000
C £113,000
D £143,000
LO 2f
16 Which two of the following actions would be appropriate if the cash budget identified a short-term
cash deficit?
A Issue shares
B Pay suppliers early
C Arrange an overdraft
D Implement better credit control procedures
E Replace non-current assets
LO 2i
17 A company’s cash budget for the next six months is shown below.
18 A telephone business has annual sales of £1.1 million and a gross profit margin of 10%. It is currently
experiencing short-term cash flow difficulties and intends to delay its payments to trade suppliers by
one month.
Requirement
To the nearest £, the amount by which the cash balance will benefit in the short term from this
change in policy, assuming sales are spread evenly over the year, and inventory levels remain
constant throughout, is
A £82,500
B £83,333
C £91,667
D £100,833
LO 2f
20 A company has annual sales of £3 million and its gross profit is 60% of sales. Inventory turnover is 60
days, customers take an average of 35 days to pay and the company pays its suppliers after 25 days.
Requirement
Defining working capital as average inventories plus average receivables minus average trade
payables and using a 365-day year for your calculations, to the nearest £1,000, the company’s
working capital will be
A £280,000
B £403,000
C £567,000
D £699,000
LO 2g
Requirement
What is the working capital (operating) cycle of the business?
A 6 weeks
B 7 weeks
C 17 weeks
D 29 weeks
LO 2g
22
£
Inventories: Raw materials 250,000
Work in progress 115,000
Finished goods 186,000
Purchases 1,070,000
Cost of goods sold 1,458,000
Sales 1,636,000
Receivables 345,000
Trade payables 162,000
Requirement
Using the table above and a 365-day year, calculate the length of the working capital cycle
(operating cycle).
A 174 days
B 182 days
C 193 days
D 293 days
LO 2g
23 Which two of the following might be associated with a lengthening cash cycle?
A Lower net operating cash inflow
B Lower investment in working capital
C Taking longer to pay trade suppliers
D Slower inventory turnover
E Higher net asset turnover
LO 2g
24 The following information is available for a wholesale business for the latest year.
The cost of goods sold during the year was £2 million and the company earns a margin of 20% of
sales. Half of all sales are credit sales and the remainder are cash sales.
Requirement
Using a 365-day year in your calculations, what is the length of the cash operating cycle in respect of
credit sales?
A 65 days
B 66 days
C 68 days
D 118 days
LO 2g
25 A company has liquidity ratio (receivables divided by payables and bank overdraft) equal to 0.5. The
directors believe that the company has to reduce its bank overdraft and have agreed to alter the
company’s credit terms to customers from two months to one month.
Requirement
What would be the effects on the company’s cash operating cycle and liquidity ratio if this change
were to be achieved?
A Cash operating cycle: Decrease; Liquidity ratio: Decrease
B Cash operating cycle: Decrease; Liquidity ratio: No change
C Cash operating cycle: Decrease; Liquidity ratio: Increase
D Cash operating cycle: Increase; Liquidity ratio: Increase
LO 2g
26
£m £m
Assets
Non-current assets 10.5
Inventories 4.2
Receivables 2.8
Cash in hand 0.3
7.3
Liabilities 17.8
Trade payables 2.6
Other short-term payables 0.8
Loan repayable in five years 6.5
9.9
27 A company’s liquidity (quick or acid test) ratio, which includes receivables, cash and payables, is 0.5.
Consideration is being given to two changes:
Proposal 1: Offer a 2% cash discount to customers for early settlement.
Proposal 2: Delay payment to all suppliers.
Requirements
All other things being equal, what will be the effects of the proposed change on the liquidity ratio?
Proposal 1
A Increase
B Decrease
C No change
Proposal 2
D Increase
E Decrease
F No change
LO 2f
28 If an increase in inventory levels is funded by an increase in the bank overdraft, what will be the effect
on the quick (liquidity) ratio?
A Increase
B Decrease
C Remain the same
D Increase, decrease or remain the same depending on the initial size of the quick ratio
LO 2f
29 A company has a current ratio greater than 1:1 and a quick (liquidity) ratio less than 1:1.
Requirements
If the company uses cash to reduce trade payables, how will these payments affect each of the
ratios?
Current ratio
A Increase
B Decrease
C No change
Quick (liquidity) ratio
D Increase
E Decrease
F No change
30 A retailing company’s current assets and current liabilities consist of inventory at cost £2,100,
receivables, cash and trade payables. Its financial ratios include the following:
Quick (liquidity) ratio = 2:1
Rate of inventory turnover = 10 times p.a.
Gross profit margin = 30%
Receivables collection period = 1 month
Payables payment period = 1.6 months
The opening inventory, receivables and payables balances are the same as the closing balances.
Requirement
The closing cash in hand balance will be
A £3,100
B £2,170
C £1,000
D £100
LO 2f
31 Fenton Ltd’s projected revenue for 20X1 is £350,000. It is forecast that 12% of sales will occur in
January and remaining sales will be equally spread among the other 11 months. All sales are on
credit. Receivables accounts are settled 50% in the month of sale, 45% in the following month, and
5% are written off as bad debts after two months.
Requirement
The budgeted cash collections for March are
A £24,500
B £26,600
C £28,000
D £32,900
LO 2f
32 A retail company extracts the following information from its accounts at 30 June 20X6:
£
Average inventory 490,000
Average receivables 610,000
Average payables 340,000
Cost of sales 4,500,000
Purchases 4,660,000
Gross profit margin 32%
Requirement
The number of days in the company’s cash operating cycle is
A 34 days
B 44 days
C 47 days
33 Fraser Ltd manufactures leather bags. The company buys raw materials from suppliers that allow the
company 2.5 months credit. The raw materials remain in inventory for 1 month and it takes Fraser Ltd
2 months to produce the goods, which are sold immediately production is completed. Customers
take an average 1.5 months to pay.
Requirement
Fraser Ltd’s cash operating cycle is
A 1 month
B 1.5 months
C 2 months
D 6 months
LO 2g
35 Merlion plc is an international company based in Malaysia. It manufactures and sells items for a wide
variety of outdoor leisure pursuits including wind surfing, camping and mountain biking. A summary
of the ratios provided by the chief accountant is as follows:
Requirements
What are the figures for Merlion plc’s cash operating cycle for each of the three years?
Cash operating cycle in 20X4
A 21 days
B 28 days
C 34 days
Cash operating cycle in 20X5
D 21 days
E 28 days
F 34 days
Cash operating cycle in 20X6
36 Shrier plc is trying to decide on its optimal level of current assets. The company’s management face a
trade-off between
A profitability and risk
B liquidity and risk
C equity and debt
D short-term and long-term borrowing
LO 2h
37 If a business is suffering from liquidity problems, the aim must be to reduce the length of the cash
operating cycle.
Which three of the following actions would achieve this?
A Reducing the credit period extended to receivables
B Reducing the payables payment period
C Extending the period of credit taken from suppliers
D Reducing the production period
E Extending the inventory holding period
LO 2h
38 Albert’s Autos is a small garage providing car servicing. Business is good, there is a steady stream of
income from repeat customers and breakdown recoveries. There are no significant cash reserves and
there is no need for an overdraft. Now the organisation that passes on most of the breakdown
recovery work offers Albert a contract to supply recovery services over a 50-mile radius. It is seeking
60 days credit rather than Albert’s usual 30 days. Albert is keen but has been warned to look for signs
of overtrading.
Requirement
Which two of the following are most likely to be symptoms of overtrading?
A A lengthening of the cash operating cycle
B A rapid reduction in sales
C Increase in the level of the current ratio
D A rapid increase in sales
E A shortening of the cash operating cycle
LO 2h
39 Apart from the actual cost of buying inventory, there are other inventory costs to consider.
Requirement
Which two of the following are inventory holding costs?
A Clerical and administrative expenses
B Insurance
C Opportunity cost of capital tied up
D Production stoppages due to lack of raw materials
40 The different functions within a company (finance, production, marketing, etc) often have differing
views about what is an ‘appropriate’ level of inventory. Essentially, two inventory problems need to
be answered – how much to order and when to order?
Requirement
If we order inventory more frequently which of the following can we expect?
A Lower ordering costs and lower average inventory
B Lower ordering costs and higher average inventory
C Higher ordering costs and lower average inventory
D Higher ordering costs and higher average inventory
LO 2h
2cd
h
Requirement
What does h describe in this formula?
A The cost of holding one unit of inventory for one period
B The cost of placing one order
C The cost of a unit of inventory
D The customer demand for the item
LO 2h
42 Fruit & Nut Ltd is re-evaluating its inventory control policy. Its daily demand for wooden boxes is
steady at 40 a day for each of the 250 working days (50 weeks) of the year. The boxes are currently
bought weekly in batches of 200 from a local supplier for £2 each. The cost of ordering the boxes
from the local supplier is £64 per order, regardless of the size of the order. The inventory holding
costs, expressed as a percentage of inventory value, are 25% pa. The Economic Order Quantity
(EOQ) can be expressed as follows:
2cd
h
Requirement
Identify the correct EOQ.
A 101 boxes
B 253 boxes
C 1,600 boxes
D 2,262 boxes
LO 2h
43 Kate Osmond works for a company manufacturing industrial fasteners, so the company has several
thousand types of inventory item. The company wants to introduce a new inventory control system
and Kate is reviewing what is available.
44 The key trade-off that lies at the heart of working capital management is that between
A business stability and solvency
B debtors and creditors
C current assets and current liabilities
D liquidity and profitability
LO 2h
45 Identify whether the following tasks are normally undertaken by the treasury department of a large
business.
Requirements
Credit control
A Yes
B No
Short-term investment
C Yes
D No
Capital investment appraisal
E Yes
F No
LO 2h
46 Total usage of one item of Archer Ltd’s inventory for the next month is estimated to be 100,000 units.
The costs incurred each time an order is placed are £180. The carrying cost per unit of the item each
month is estimated at £2. The purchase price of each unit is £4. The economic order quantity formula
is:
(2cd)/h
Requirements
When using this formula to find the optimal quantity to be ordered, identify the amounts that are
included in the calculation.
Cost per order (£180)
A Included
B Not included
Carrying cost per unit per month (£2)
C Included
D Not included
Purchase price per unit (£4)
47 Rust Ltd invoices customers at the beginning of the month following the month in which a sale is
made. All of the cash to be received in respect of these invoices occurs within two calendar months
of invoicing. The company receives in cash 45% of the total gross sales value in the month of
invoicing. Because Rust Ltd operates in a market where there is poor creditworthiness bad debts are
20% of total gross sales value, but there is a 10% discount for settling accounts within a calendar
month of invoicing.
Requirement
What percentage of the sales invoiced in the first month will be received as cash in the second
month by Rust Ltd?
A 55.0%
B 35.0%
C 39.5%
D 30.0%
LO 2h
48 Youri plc has the following opening and closing balances on its trade receivables budget for next
year, 20X7:
£
Opening balance on trade receivables (invoiced on 31 December 20X6) 56,000
Closing balance on trade receivables (invoiced on 30 November 20X7) 72,000
In 20X7 credit sales are expected to be £276,000. The company offers a 10% discount on all amounts
paid within one month of the invoice date. In 20X7 the company expects 50% of eligible trade
customers to take advantage of this discount.
Requirement
How much cash does Youri plc expect to receive from customers during the year?
A £247,000
B £243,400
C £260,000
D £276,000
LO 2h
Measure
Resources Operations
outputs
Control action
Monitor
X
and control
Requirement
What should be in the box marked ‘X’?
A Feedback
B Fixed costs
C Activity levels
D Budgets and standards
LO 3a
4 Which two of the following statements about management control reports are correct?
A Reports should be completely accurate.
B Reports should be clear and comprehensive.
C Reports should not include information about uncontrollable items.
D Based on the information contained in reports, managers may decide to do nothing.
LO 3a
5 Which of the following is not a style of performance evaluation identified in Hopwood’s studies?
A Budget constrained
B Non-accounting
C Revenue focused
6 Select which of the following styles of using budgetary information is most likely to lead to each of
the situations described.
Requirements
Job-related tension is caused by which of the following styles:
A Budget constrained
B Profit conscious
C Non-accounting
Less focus on cost control is caused by which of the following styles:
D Budget constrained
E Profit conscious
F Non-accounting
Incidence of budget bias is caused by which of the following styles:
G Budget constrained
H Profit conscious
I Non-accounting
LO 3a
7 A company have recently implemented a new budgetary planning and control system after several
years of trading.
Requirement
Having made a significant investment in the new system, the company’s management team were
surprised to learn that it is not designed to do which of the following?
A Improve control of actual performance
B Improve coordination of activities
C Improve gross profit
D Improve communication of ideas and plans
LO 3a
8 Which of the following is a reason for adopting a decentralised rather than a centralised
organisational structure?
A Improved goal congruence between the goals of divisional management and the goals of the
organisation
B Rapid management response to changes in the trading environment
C Availability of objective performance measures
D Improved communication of information between the group’s managers
LO 3a
9 Division P is an investment centre within PC Ltd. Over which of the following is the manager of
division P likely to have control?
(1) Transfer prices
(2) Level of inventory in the division
(3) Discretionary fixed costs incurred in the division
10 The manager of a trading division has complete autonomy regarding the purchase and use of non-
current assets. The division operates its own credit control policy in respect of its customers but the
group operates a central purchasing function through which the division places all orders with
suppliers and invoices are paid by head office.
Inventories of goods for sale are kept in central stores, from which local divisions call off
requirements for local sales on a monthly basis into a local inventory.
Divisional performance is assessed on the basis of controllable residual income. The company
requires a rate of return of ‘R’.
Using the following symbols:
Requirement
Which of the following formulae calculates the division’s controllable residual income?
A [C – F] – [(N + D + B) × R]
B [C – F] – [(N + D + I + B) × R]
C C – [(N + D) × R]
D G – (T × R)
LO 3b
11 Division D of Distan Ltd is considering a project which will increase annual profit by £15,000 but will
require average receivables levels to increase by £100,000. The company’s target return on
investment is 10% and the imputed interest cost of capital is 9%. Division D currently earns a return
on investment of 13%.
Requirements
Would the return on investment (ROI) and residual income (RI) performance measures motivate the
manager of Division D to act in the interest of the Distan company as a whole?
12 Division B of a national house-building group is projected to earn profits of £4.5 million in the current
year on capital employed at the year end of £25 million. The division has been set a target return on
investment (ROI) of 20%.
The manager of division B is considering disposing of some slow-moving houses which have a full
market value of £16 million, but are held in the books at cost of £12 million, for a reduced figure of
£14 million.
Requirement
Which of the following statements is true?
A The revised divisional ROI will be below 20% and the manager will make a goal congruent
decision.
B The revised divisional ROI will be above 20% and the manager will not make a goal congruent
decision.
C The revised divisional ROI will be below 20% and the manager will not make a goal congruent
decision.
D The revised divisional ROI will be above 20% and the manager will make a goal congruent
decision.
LO 3b
13 On the last day of the financial year a division has net assets with a total carrying amount of
£300,000. The return on investment for the division is 18%.
The division manager is considering selling a non-current asset immediately before the year end. The
non-current asset has a carrying amount of £15,000 and will sell for a profit of £5,000.
Requirement
What would be the division’s return on investment (ROI) immediately after the sale of the asset at the
end of the year?
A 17.7%
B 19.3%
C 20.3%
D 20.7%
LO 3b
14 Which of the following is not a perspective that is monitored by the balanced scorecard approach to
performance measurement?
A Financial
B Customer
C Supplier
D Innovation and learning
LO 3b
18 A company manufactures a single product and has drawn up the following flexed budget for the
year.
19 Within decentralised organisations there may be cost centres, investment centres and profit centres.
Which of the following statements is true?
A Cost centres have a higher degree of autonomy than profit centres.
B Investment centres have the highest degree of autonomy and cost centres have the lowest.
C Investment centres have the lowest degree of autonomy.
D Profit centres have the highest degree of autonomy and cost centres have the lowest.
LO 3a
20 A manager of a trading division of a large company has complete discretion over the purchase and
use of non-current assets and inventories. Head Office keeps a central bank account, collecting all
cash from receivables and paying all suppliers. The division is charged a management fee for these
services. The performance of the manager of the division is assessed on the basis of her controllable
residual income. The company requires a rate of return of ‘R’. Using the following symbols:
Requirement
Which of the following is the correct formula for calculating the controllable residual income of the
division?
A P – [(F + S) × R]
B N – [(F + S) × R]
C N – (Z × R)
D P – (Z × R)
LO 3b
21 Which of the following sentences best describes what is necessary for a responsibility accounting
system to be successful?
A Each manager should know the criteria used for evaluating his or her own performance.
Requirement
Select the percentage that is the highest rate for the imputed cost of capital that would produce the
same ranking for these three divisions using residual income instead of return on investment.
A 11.9%
B 13.9%
C 17.9%
D 23.9%
LO 3b
23 Division X of Martext Ltd produced the following results in the last financial year:
£’000
Net profit 400
Average net assets 2,000
For evaluation purposes all divisional assets are valued at original cost. The division is considering a
project which will increase annual net profit by £30,000, but will require average inventory levels to
increase by £100,000 and fixed assets to increase by £100,000. Martext Ltd imposes a 16% capital
charge on its divisions.
Requirement
Given these circumstances, will the evaluation criteria of return on investment (ROI) and residual
income (RI) motivate division X managers to accept the project?
A ROI: No; RI; Yes
B ROI: Yes; RI: Yes
C ROI: No; RI: No
D ROI: Yes; RI: No
LO 3b
24 Ulster plc estimates that the net cash flows associated with a new piece of equipment will be equal in
each of the five years of the asset’s life.
In assessing performance, Return on Investment (ROI) is used, but the figures for capital employed
and accounting profit have come under scrutiny.
26 Which two of the following are true when management information is provided by a shared service
centre (SSC)?
A Management information quality is improved as best practice can be implemented
B There is a more consistent management of business data
C Specific finance issues affecting individual departments will be taken into account
D The costs of providing management information will increase
LO 3f
27 When a company decides to use cloud accounting, which of the following does it no longer need?
A Accounting software update manager
B Trained accounts staff
C Management reporting timetables
D Internet access
LO 3e
28 The shared service centre (SSC) of Oilspill Ltd operates its payroll, finance and project management
functions. It has adopted the balanced scorecard for measuring its performance.
Requirement
Which two of the following would be appropriate for the SSC to use as performance measures in the
‘customer perspective’ quadrant?
A Cost per accounting transaction processed
29 Ashbyrn Ltd is analysing customer services in all divisions. For the last six months, it has asked all of
its customers to rate the service anonymously using a scoring system of 1 to 3, with 3 being happy, 2
being neither happy nor unhappy and 1 being unhappy. The data collected was presented using a
table:
A 65 58
B 70 70
C 35 85
D 50 40
Ashbyrn Ltd concluded that Division C was providing the best customer service.
Requirement
Which of the following statements is/are true?
(1) The way the data was collected has introduced bias.
(2) The data was presented in a way to mislead.
(3) The conclusion reached is flawed.
A (1) and (2) only
B (2) and (3) only
C (1) and (3) only
D (3) only
3d
30 A manager read on the internet that sales of its product are expected to increase by 40% next year.
They then read a different article that said that sales of its product are expected to increase by 25%
next year, and another that suggested 22%. They decided to budget for an increase in 40%. A year
later it was confirmed that sales had increased by 22%.
Requirement
What type of bias affected the manager’s decision making?
A Survivorship
B Anchoring
C Self-selection
D Omitted variable
3d
31 Sprowt Ltd has produced the following chart showing sales for the last quarter by division:
Requirement
Which of the following statements is/are true?
(1) Division 2’s sales are twice as much as Division 3’s for the quarter.
(2) There is insignificant difference between the sales for each division.
(3) Division 1’s sales are five times as much as Division 3’s for the quarter.
A (1) and (3) only
B (1) only
C (2) only
D (1), (2) and (3)
3d
2 Which of the following statements about budgets and standards is/are correct?
(1) Budgets can be used in situations where output cannot be measured but standards cannot be
used in such situations.
(2) Budgets can include allowances for inefficiencies in operations but standards use performance
targets which are attainable under the most favourable conditions.
(3) Budgets are used for planning purposes, standards are used only for control purposes.
A 1, 2 and 3
B 1 and 2 only
C 1 only
D 2 and 3 only
LO 3c
Budget Actual
Production 520 units 560 units
Variable production overhead
cost £3,120 £4,032
Labour hours worked 1,560 2,240
Requirement
The variable production overhead total variance for June is
A £240 adverse
B £672 adverse
C £672 favourable
D £912 adverse
LO 3c
9 The following information is available for Mentamint Ltd, which makes one product.
Requirement
What is the fixed overhead expenditure variance?
A £1,200 adverse
B £800 favourable
C £1,200 favourable
D £800 adverse
LO 3c
10 To reconcile the budgeted contribution to the actual contribution, which of the following must be
accounted for?
A All sales variances and all marginal cost variances
B All sales variances
C All marginal cost variances
D Neither sales nor marginal cost variances
LO 3c
11 A company budgets to make and sell 83,000 units of its product each period. The standard
contribution per unit is £8.
The following variances (A = adverse; F = favourable) were reported for the latest period.
Variances £
Sales volume contribution 42,400 (A)
Sales price 7,310 (F)
Material total 7,720 (F)
Material price 10,840 (F)
Labour total 6,450 (A)
Variable overhead total 4,250 (A)
Fixed overhead expenditure 8,880 (F)
The budgeted fixed overhead expenditure for the period was £210,000.
Requirement
The actual profit for the period was
A £424,810
B £435,650
C £483,190
D £634,810
LO 3c
12 During a period, 17,500 labour hours were worked at a standard cost of £6.50 per hour. The labour
efficiency variance was £7,800 favourable.
Requirement
How many standard hours should have been worked?
13 The following information relates to material costs for the latest period.
Requirement
What was the standard materials price per kg?
A £1.50
B £1.70
C £1.80
D £2.04
LO 3c
15 Variances which are simply random deviations can be described as which of the following?
A Controllable
B Uncontrollable
C Either controllable or uncontrollable
D Marginal costs
LO 3c
17 Which of the following would not help to explain a favourable materials usage variance?
A Using a higher quality of materials than specified in the standard
B Achieving a lower output volume than budgeted
C A reduction in quality control checking standards
D A reduction in materials wastage rates
LO 3c
18 Select the likely impact of the following actual events on the materials price variance.
Requirements
The standard material price was set too low.
A Adverse
B Favourable
C No impact
Discounts were taken from suppliers for early settlement of invoices.
D Adverse
E Favourable
F No impact
The material purchased was of a higher quality than standard.
G Adverse
H Favourable
I No impact
LO 3c
19 Which of the following could cause a favourable variable overhead efficiency variance?
A Using less material than the flexed materials usage budget predicts
B Working fewer hours than the flexed labour hours budget predicts
C Variable overhead cost per hour being less than the standard variable overhead cost per hour
D Fixed overhead expenditure being less than budgeted
LO 3c
20 The labour total variance for the latest period was favourable.
Requirement
Which of the following are, together, certain to have caused this variance?
A Lower hourly rates than standard and higher than budgeted labour hours
B Lower hourly rates than standard and lower than budgeted labour hours
21 A business has a budgeted materials cost of £7 per kg. During the month of June 2,500 kg of the
material was purchased and used at a cost of £18,750 in order to produce 1,250 units of the product.
The budgeted materials cost of £14,000 had been based upon budgeted production of 1,000 units
of the product.
Requirement
What was the materials total variance?
A £1,250 adverse
B £1,250 favourable
C £4,750 adverse
D £4,750 favourable
LO 3c
22 A business has a budgeted labour cost per unit of £15.50. During the month of December
production details were as follows
Budget 12,600 units
Actual 12,000 units
The actual labour cost for the month was £199,400
Requirement
What was the labour total variance as a percentage of the flexed budgeted figure?
A 2.1% adverse
B 2.1% favourable
C 7.2% adverse
D 7.2% favourable
LO 3c
23 A company’s actual output for the period was 22,000 units and variable overhead costs were in line
with budget. The budgeted variable overhead cost per unit was £3 and total overhead expenditure
of £108,000 meant that fixed overheads were £8,000 under budget.
Requirement
What was the budgeted level of fixed overheads for the period?
A £34,000
B £50,000
C £66,000
D £116,000
LO 3c
24 When absorbing variable overheads on the basis of machine hours, the total variable overhead
variance can be worked out by comparing actual variable overheads in a period with the product of
the absorption rate and which of the following?
A (Planned output) × (Standard machine hours per unit)
B (Actual output) × (Actual machine hours per unit)
25 A product requires raw material with a standard cost of 50p per kg. In February, 2,500 kg of raw
material were purchased at a cost of £1,500 of which 2,300 kg of raw material were used in that
month’s production.
Requirement
If raw material inventory is valued at standard cost and there was no opening inventory of raw
material, which of the following represents the material price variance for February?
A £250 adverse
B £230 adverse
C £230 favourable
D £250 favourable
LO 3c
£
Budgeted contribution (10,000 units) 172,000
The purchasing manager decided to buy a superior quality material that was more expensive than
the standard material for use in October. This superior material causes less waste. Labour was able to
convert this superior material into the final product in less than the standard time. A wage rise,
agreed in July and implemented at the beginning of October, also impacted on the results.
The decision to buy the superior quality materials caused the profit in October to change
Requirement
Select which of the following best describes that change.
A Fall by £1,600
B Rise by £4,800
C Fall by £6,000
D Rise by £2,000
LO 3c
27 The following data are available with regard to a product for a given period:
Requirement
The favourable sales volume variance was
A £1,020
B £1,040
C £180
D £160
LO 3c
28 The following information relates to a firm’s labour costs for the year:
Requirement
The standard number of labour hours for actual output were
A 125,000 hours
B 127,500 hours
C 132,500 hours
D 135,000 hours
LO 3c
29 Would each of the following actual events during the year lead to a sales volume variance being
adverse or favourable or have no impact on it?
Requirements
Sales prices increased
A Adverse
B Favourable
C No impact
Successful advertising campaign
D Adverse
E Favourable
F No impact
Increased labour pay rates
G Adverse
H Favourable
31 Diff Ltd has produced an operating statement showing last month’s variances, using its new software.
Some of the figures had to be manually entered as the system isn’t fully integrated. All of the
variances are favourable. Industry standards have been added to the operating statement, taken
from the internet.
Requirement
Which of the following is/are cause for professional scepticism?
(1) The fact that all of the variances are favourable.
(2) The source and validity of the industry standards.
(3) The data used to create the operating statement.
A (2) only
B (1) and (3) only
C (2) and (3) only
D (1), (2) and (3)
3d
2 Which two of the following show how the breakeven point in units can be calculated?
A Total fixed costs/contribution per unit
B Contribution required to break even/contribution per unit
C Contribution/sales
D Fixed costs/costs to sales ratio
LO 4a
3 A company makes a single product and incurs fixed costs of £30,000 per month. Variable cost per
unit is £5 and each unit sells for £15. Monthly sales demand is 7,000 units.
Requirement
The breakeven point in terms of monthly sales units is
A 2,000 units
B 3,000 units
C 4,000 units
D 6,000 units
LO 4a
4 A company manufactures a single product for which cost and selling price data are as follows:
Requirement
The margin of safety, expressed as a percentage of budgeted monthly sales, is
A 20%
B 25%
C 73%
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 107
D 125%
LO 4a
5 A company has calculated its margin of safety to be 20% of budgeted sales. Budgeted sales are
5,000 units per month and budgeted contribution is £25 per unit.
Requirement
What are the budgeted fixed costs per month?
A £25,000
B £100,000
C £125,000
D £150,000
LO 4a
6 Doer Ltd makes a single product, the Whizzo. This product sells for £15, and makes a contribution of
£5 per unit. Total fixed costs per annum are £11,125.
Requirement
If Doer Ltd wishes to make an annual profit of £11,875 how many Whizzos do they need to sell?
A 1,533 units
B 2,225 units
C 2,375 units
D 4,600 units
LO 4a
7 Jackson plc expects a new venture to yield a gross profit of 50% on sales.
Fixed salary costs are expected to be £23,520 per month and other expenses are expected to be 8%
of sales.
Requirement
Calculate the sales revenue necessary to yield a monthly profit of £58,800.
A £56,000
B £140,000
C £164,640
D £196,000
LO 4a
8 Bandido Ltd manufactures and sells a single product, with the following estimated costs for next year.
Unit cost
150,000 units of
100,000 units of output output
£ £
Variable materials 20.00 20.00
Variable labour 5.00 5.00
Production overheads 10.00 7.50
Marketing costs 7.50 5.00
9 Xena Ltd generates a 12% contribution on its weekly sales of £280,000. A new product, Z, is to be
introduced at a special offer price in order to stimulate interest in all the company’s products,
resulting in a 5% increase in weekly sales of the company’s other products. Product Z will incur a
variable unit cost of £2.20 to make and £0.15 to distribute. Weekly sales of Z, at a special offer price
of £1.90 per unit, are expected to be 3,000 units.
Requirement
The effect of the special offer will be to increase the company’s weekly profit by:
A £330
B £780
C £5,700
D £12,650
LO 4a
10 JJ Ltd manufactures a product which has a selling price of £14 and a variable cost of £6 per unit. The
company incurs annual fixed costs of £24,400. Annual sales demand is 8,000 units.
New production methods are under consideration, which would cause a 30% increase in fixed costs
and a reduction of £1 in the variable cost per unit. The new production methods would result in a
superior product and would enable the sales price to be increased to £15 per unit.
Requirement
If the organisation implements the new production methods and wishes to achieve the same profit as
that under the existing method, the number of units to be produced and sold annually would be
A 3,960
B 4,755
C 7,132
D 8,915
LO 4a
11
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 109
£
100,000
80,000
30,000
12 Which two of the following statements about traditional breakeven charts are correct?
A The fixed costs are depicted by a straight line parallel to the vertical axis.
B The sales revenue line passes through the origin.
C The total cost line cuts the vertical axis at the point which is equal to the period fixed costs.
D The breakeven point is the point where the sales revenue line crosses the fixed cost line.
LO 4a
13 When using limiting factor analysis in order to calculate maximum profit, which three of the following
assumptions should be made?
A Fixed costs per unit are not changed by increases or decreases in production volume.
B Fixed costs in total are not changed by increases or decreases in production volume.
C Variable costs per unit are not changed by increases or decreases in production volume.
D Variable costs in total are not changed by increases or decreases in production volume.
E Estimates of sales demand, prices and resources required for each product are known with
certainty.
LO 4a
14 A company produces a single product for which standard cost details are as follows.
15 A company makes three products to which the following budget information relates:
B A T
£ per unit £ per unit £ per unit
Selling price 100 120 145
Labour at £20 per hour 40 40 60
Materials at £10 per kg 10 20 30
Fixed overheads 30 40 20
Profit 20 20 35
The marketing department says the maximum annual demand is for 1,000 units of Product B, 1,200
units of product A and 1,500 units of product T, and the factory has budgeted to produce that
number of units. It has just been discovered that next year materials will be limited to 5,000 kg and
labour to 10,000 hours.
Requirement
If the company wishes to maximise profit, the priority in which the products should be made and sold
is
A B then A then T
B A then B then T
C T then A then B
D T then B then A
LO 4b
16 A company makes three products and has produced the following standard cost cards.
X Y Z
£ per unit £ per unit £ per unit
Selling price 100 80 70
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 111
X Y Z
£ per unit £ per unit £ per unit
Variable costs:
Material 20 30 5
Labour 30 10 5
Fixed overheads 40 10 40
Profit 10 30 20
The same labour is used to make all three products, but in different quantities.
Assume that the company can make and sell any combination of products.
Requirement
In a month where expenditure on labour is restricted to £50,000, what is the maximum contribution
and profit that can be earned?
A Contribution: insufficient information to calculate, Profit: insufficient information to calculate
B Contribution: Insufficient information to calculate, Profit: £200,000
C Contribution: £600,000, Profit: Insufficient information to calculate
D Contribution: £600,000, Profit: £200,000
LO 4b
17 Using the following data Chin has correctly selected the plan which will maximise profit for next
month, assuming 15,000 labour hours are available.
Product M Product Q
£ per unit £ per unit £ per unit £ per unit
Selling price 171 235
Less: Variable costs
Materials 26 45
Labour (at £10 per hour) 60 80
86 125
Contribution 85 110
Maximum demand (units) 1,000 1,200
Requirement
If an extra 48 hours were available (at the normal hourly rate of £10) and allocated optimally, profit
for next month would be expected to increase by
A £180
B £660
C £680
D £880
LO 4b
18 MNP plc produces three products from a single raw material that is limited in supply. Product details
for period 6 are as follows:
The planned production optimises the use of 6,000 kg of raw material that is available from MNP
plc’s normal supplier at the price of £0.50 per kg. However, a new supplier has been found that is
prepared to supply a further 1,000 kg of the material.
Requirement
The maximum price that MNP plc should be prepared to pay for the additional 1,000 kg of the
material is
A £1,740
B £1,800
C £2,240
D £2,300
LO 4b
19 Green Ltd manufactures two components, the Alpha and the Beta, using the same machines for
each. The budget for next year requires the production of 4,000 units of each component.
The variable production cost per component is as follows:
Only 16,000 machine hours will be available next year. A sub-contractor has quoted the following
unit prices to supply components: Alpha £29; Beta £40.
Requirement
The optimum plan to obtain the components required is
A Alpha: produce 0 units, purchase 4,000 units; Beta: produce 0 units, purchase 4,000 units
B Alpha: produce 2,000 units, purchase 2,000 units; Beta: produce 0 units, purchase 4,000 units
C Alpha: produce 2,666 units, purchase 1,334 units; Beta: produce 4,000 units, purchase 0 units
D Alpha: produce 4,000 units, purchase 0 units; Beta: produce 2,000 units, purchase 2,000 units
LO 4b
20 Blue plc manufactures two components, the Aura and the Venta, using the same machines for each.
The budget for next year requires the production of 400 units of each component.
The variable production cost per component is as follows:
A maximum of 15,000 machine hours will be available next year. A sub-contractor has quoted the
following unit prices to supply components: Aura £390; Venta £400.
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 113
Requirement
The optimum plan to obtain the components required is
A Aura: produce 400 units, purchase 0 units; Venta: produce 150 units, purchase 250 units
B Aura: produce 250 units, purchase 150 units; Venta: produce 375 units, purchase 25 units
C Aura: produce 233 units, purchase 167 units; Venta: produce 400 units, purchase 0 units
D Aura: produce 0 units, purchase 400 units; Venta: produce 0 units, purchase 400 units
LO 4b
21 A company has only 6,000 kg of an irreplaceable raw material called Grunch. Grunch can be used to
make three possible products X, Y and Z, details of which are given below:
X Y Z
Maximum demand (units) 4,000 3,000 5,000
Constant unit selling price (£/unit) £3.00 £4.00 £5.00
Constant unit variable cost (£/unit) £1.50 £2.40 £2.60
Fixed costs (£/unit) £1.80 £2.20 £2.40
Quantity of raw material Grunch to make one unit of product (kg) 0.30 0.40 0.80
Requirement
If the company’s objective is to maximise profit, which of the following production schedules should
be chosen?
A X: 2,666 units; Y: 3,000 units; Z: 5,000 units
B X: 4,000 units; Y: 3,000 units; Z: 5,000 units
C X: 4,000 units; Y: 2,000 units; Z: 5,000 units
D X: 4,000 units; Y: 3,000 units; Z: 4,500 units
LO 4b
22 A company makes large plastic containers for storing chemicals. An extract from the 20X7 budget
based on a sales volume of 10,000 units is given below.
Actual results for 20X7 were in line with this budget except that 12,000 units were produced and
sold.
For 20X8 all costs are expected to increase by 10%, although selling price increases are expected to
be restricted to 5%.
Requirement
What level of sales must be achieved in 20X8 in order to maintain the actual profit at the 20X7 level?
A 12,400 units
B 11,639 units
C 12,000 units
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 115
116 Management Information ICAEW 2022
Chapter 11: Investment appraisal techniques
1 A company is considering investing £46,000 in a machine that will be operated for four years, after
which time it will sell for £4,000. Depreciation is charged on the straight-line basis. Forecast
operating profits/(losses) to be generated by the machine are as follows:
Year £
1 16,500
2 23,500
3 13,500
4 (1,500)
Requirement
What are the Payback Period (PP) and the Accounting Rate of Return (ARR), calculated as average
annual profits divided by the average investment?
A PP = 1.56 years; ARR = 52.0%
B PP = 2.44 years; ARR = 56.5%
C PP = 2.44 years; ARR = 52.0%
D PP = 1.56 years; ARR = 56.5%
LO 4c
2 A company is currently evaluating a project which requires investments of £5,000 now, and £2,000 at
the end of Year 1. The cash inflow from the project will be £7,000 at the end of Year 2 and £6,000 at
the end of Year 3.
The cost of capital is 16%.
Requirement
What are the Discounted Payback Period (DPP) and the Net Present Value (NPV)?
A DPP = 2.0 years; NPV = £3,013
B DPP = 2.4 years; NPV = £2,323
C DPP = 2.0 years; NPV = £2,323
D DPP = 2.4 years; NPV = £3,013
LO 4c
3 A leasing agreement is for five years. £10,000 must be paid at the beginning of the first year, to be
followed by four equal payments at the beginning of Years 2, 3, 4 and 5. At a discount rate of 8%, the
present value of the four equal payments is £26,496.
Requirement
The total amount to be paid during the lease period is
A £8,000
B £32,000
C £32,480
D £42,000
LO 4c
5 Which of the following statements about Net Present Value (NPV) and Internal Rate of Return (IRR)
methods are correct?
(1) An investment with a positive NPV is financially viable.
(2) NPV is a superior method to IRR.
(3) The graph of NPV against discount rate has a negative slope for most projects.
(4) NPV is the present value of expected future net cash receipts less the cost of the investment.
A (1) and (3) only
B (2) and (4) only
C (1), (2) and (3) only
D (1), (2), (3) and (4)
LO 4d
6 A company is considering investing £160,000 in a project which will generate the following positive
cash flows.
Requirement
The Net Present Value of the project’s cash flows, at a cost of capital of 24%, is (to the nearest £500)
A £167,500
B –£84,000
C £38,500
D £7,500
LO 4c
£
Initial cost (400,000)
12 months later 300,000
24 months later 200,000
The cost of capital is estimated at 15% per annum during the first year and 17% per annum during
the second year.
8 For a company with the objective of maximising net present value, what is the validity of the
following statements for a conventional investment project?
(1) The accounting rate of return (ARR) method of project appraisal usually gives too little weight to
cash flows which occur late in the project’s life.
(2) For a project with a (unique) IRR greater than the opportunity cost of capital, the IRR method of
project appraisal usually gives too little weight to cash flows which occur late in the project’s life.
A Statement (1) = True; Statement (2) = True
B Statement (1) = True; Statement (2) = False
C Statement (1) = False; Statement (2) = False
D Statement (1) = False; Statement (2) = True
LO 4d
9 Which of the following statements about Net Present Value (NPV) are correct?
(1) An investment with a positive NPV is viable.
(2) NPV is a superior appraisal method to Internal Rate of Return.
(3) NPV is the present value of expected future net cash receipts less the cost of the investment.
A (1) and (2) only
B (1) and (3) only
C (1) only
D (1), (2) and (3)
LO 4d
10 Which of the following is not an advantage of the payback method of investment appraisal?
A Focus on a short payback period enhances liquidity
B Investment risk is reduced if the payback period is shorter
C It quantifies the effect of the timing of cash flows through the investment
D It is useful as an initial screening device
LO 4d
11 Which two of the following are not advantages of the accounting rate of return (ARR) method of
investment appraisal?
A It is based on objective accounting profits
B The calculation method of ARR is universally agreed
C It involves a familiar concept of a percentage return
D It takes account of returns over the entire project life
LO 4d
13 A company has identified two mutually-exclusive projects which have an equivalent effect on the risk
profile of the company.
Project I Project II
Discounted payback period 2.8 years 3.2 years
Net present value £17,200 £15,700
Internal rate of return 18% 22%
Average accounting rate of return 19% 21%
14 A group of projects all involve the same initial outflow followed by a series of constant annual cash
inflows. The projects all have the same lives.
Requirement
What is the validity of the following statements?
(1) A ranking of the projects by NPV gives the same order as ranking by payback.
(2) A ranking of the projects by IRR gives the same order as ranking by payback.
A Statement (1) = True; Statement (2) = True
B Statement (1) = True; Statement (2) = False
C Statement (1) = False; Statement (2) = False
D Statement (1) = False; Statement (2) = True
LO 4d
16 Kennett plc is about to undertake a project requiring an investment of £305,000 to generate equal
annual inflows of £61,000 in perpetuity.
Requirement
If the first inflow from the investment arises at the same time as the initial investment, what is the IRR
of the project?
A 20%
B 25%
C 400%
D 500%
LO 4c
17 A company is considering investing £400,000 in equipment that will produce annual savings of
£116,300 for five years.
Requirement
If the investment is made on 1 January 20X0 and the savings are receivable from 31 December 20X1
to 31 December 20X5, the internal rate of return of the investment is approximately
A 10%
B 14%
C 16%
D 29%
LO 4c
18 Devereaux Ltd is considering investing in a project with the following cash flows:
The project has a negative net present value of £3,401 at a 5% discount rate, and a positive net
present value of £945 at 15%.
Requirement
Which of the following is the approximate internal rate(s) of return of the project?
A 10% only
B 13% only
C 10% and 20%
19 A company is considering a project which has an initial outflow followed by several years of cash
inflows, with a cash outflow in the final year.
Requirement
How many internal rates of return could there be for this project?
A Only two
B Either one or two
C Either zero or two
D Zero, one or two
LO 4d
A Seven years
B Six years
C Five years
D Four years
LO 4c
21 Given a cost of capital of 10%, what is the discounted payback period of the following investment?
A 5.25 years
B 6.00 years
C 6.25 years
D 7.00 years
LO 4c
22 A project analyst has just completed the following evaluation of a project which has an initial cash
outflow followed by several years of cash inflows:
Internal rate of return (IRR) = 15% pa
Discounted payback period (DPP) = 7 years
She then realises that the company’s annual cost of capital is 12% not 10% and revises her
calculations.
23 For a project with a normal pattern of cash flows (ie, an initial outflow followed by several years of
inflows), the internal rate of return is the interest rate that equates the present value of expected
future cash inflows to
A the project’s cost of capital
B zero
C the terminal (compounded) value of future cash receipts
D the initial cost of the investment outlay
LO 4d
24 A project has an initial cash outflow followed by a series of positive future cash inflows where the
internal rate of return is unique and the net present value is positive at the opportunity cost of capital.
Requirement
Which of the following statements is true for this project?
A The internal rate of return is always greater than the opportunity cost of capital.
B The internal rate of return is sometimes lower than the opportunity cost of capital.
C The internal rate of return is always lower than the opportunity cost of capital.
D The internal rate of return is sometimes greater than the opportunity cost of capital.
LO 4d
25 A company has identified three independent projects, X, Y and Z. It has estimated the cash flows and
positive internal rates of return (IRRs) as follows:
26 A company is to spend £60,000 on a machine that will have an economic life of 10 years and no
residual value. Depreciation is to be charged using the straight-line method. Estimated operating
cash flows are:
Year £
1 –2,000
2 +13,000
3 +20,000
4–6 +25,000 each year
7–10 +30,000 each year
Requirement
What is the average accounting rate of return (ARR), calculated as average annual profits divided by
the average investment?
A 75%
B 55%
C 38%
D 28%
LO 4c
27 A project has an initial investment cost of £200,000. It is expected to generate a net cash inflow of
£20,000 at the end of its first year. This will rise to £25,000 at the end of the second year and remain
at £25,000 per annum in perpetuity. The relevant cost of capital is expected to be 8% in the first year
and 10% in the second and subsequent years.
Requirement
What is the net present value of the project (to the nearest £100)?
A £29,000
B £45,800
C £50,000
D £68,500
LO 4c
28 A project can be expected to generate 10 annual cash inflows of £30,000 starting immediately. The
project requires an initial cash outlay of £150,000 and a final cash outlay at the end of 10 years of
£50,000.
Requirement
If the annual cost of capital is 10%, what is the net present value of the project (to the nearest £100)?
29 A conventional project has a payback period of 5 years and yields a constant annual cash flow. The
cost of capital is 20%.
Requirement
Which of the following statements is true?
A The net present value of the project must always be positive.
B The net present value of the project must always be negative.
C The internal rate of return of the project must equal 20%.
D The average accounting rate of return is never less than zero.
LO 4d
30 Soyuz Ltd is considering two separate investment projects. Both projects involve an initial outlay and
both are expected to produce positive annual net cash flows throughout their expected lives. The
projects are not mutually exclusive. The company uses the net present value (NPV) method and
internal rate of return (IRR) method to evaluate its investment projects.
The following statements have been made in relation to the above projects:
(1) The IRR method may produce multiple solutions for one or both of the projects.
(2) The IRR method and NPV method may not give the same decision concerning acceptance or
rejection of the projects.
(3) The IRR method and NPV method may not rank the projects in the same order of acceptability.
Requirement
Which of the above statements are correct?
A (1) and (2)
B (1) and (3)
C (2) and (3)
D (3) only
LO 4d
31 Projects X and Y both have an initial outflow followed by a series of inflows. At an interest rate of 15%
project Y has the greater Net Present Value (NPV). The discount rate at which both projects have the
same NPV is greater than 15%, but less than the Internal Rates of Return of either individual project.
Requirement
Which diagram best represents the relationship between the NPVs of the projects and the discount
rate?
i i
Y
Y
X X
i i
X X
Y
Y
A Diagram A
B Diagram B
C Diagram C
D Diagram D
LO 4d
33 A project has an initial cash outflow followed by three annual positive cash inflows and has a payback
period of two years.
34 A project with an initial cash outflow of £55,000 was expected to have the following cash inflows
which arise at the end of each year:
Year 1 £19,000
Year 2 £19,000
Year 3 £19,000
Year 4 £19,000
Subsequently it was discovered that the cash inflow at the end of Year 3 had been underestimated by
£6,000.
Requirement
What would be the effect on the project’s internal rate of return (IRR) and its payback period?
A IRR = Increase; Payback period = No change
B IRR = Increase; Payback period = Decrease
C IRR = Decrease; Payback period = No change
D IRR = Decrease; Payback period = Decrease
LO 4c
35 A company is considering undertaking a cost reduction project which will require an outlay in one
year’s time (t1) of £900,000. Savings in costs are likely to amount to £400,000 at t2, and £600,000 at t3.
The company’s cost of capital is 10% p.a.
Requirement
If all cash savings are deemed to arise at the end of each year, what (to the nearest £1,000) is the NPV
of the project?
A £(41,000)
B £(37,000)
C £41,000
D £37,000
LO 4c
36 A company has £75,000 in a bank account as at 31 December 20X0. The company then deposits
£4,000 in the account at the end of each of the next three years (ie, 20X1, 20X2, 20X3).
Requirement
If all amounts in the account earn annual interest at 8% per annum, what will be the balance on the
account at 1 January 20X3?
A £82,133
1 Sunshine Ltd
Sunshine Ltd (Sunshine) manufactures and sells a range of three umbrellas – the Standard, the Easy
Opener and the Dome. Production and sales data for April was as follows:
The variable labour cost is £10 per hour and Sunshine’s fixed overheads for April were £88,000.
Requirement
1.1 Calculate the total value of the closing inventory for each product under marginal costing:
Standard £
Easy Opener £
Dome £
1.3 During May the fixed overhead absorption rate was calculated as £15 per labour hour and the
value of the closing inventory under marginal costing, and the number of units, was as below.
The labour cost per hour and per unit remained at their April values.
Requirement
Calculate the total value of the closing inventory for May for each product under absorption
costing.
Standard: £
Dome: £
1.4 During June, Sunshine sold all of the opening inventory and all the units it manufactured
during the month. Sales price and marginal cost information for June was as follows:
Requirement
Assuming the same actual production data and fixed production overheads in June as for
April, complete the table below which calculates Sunshine’s gross profit for June under
marginal costing and absorption costing.
Standard
Easy opener
Dome
Gross profit
1.5 During July sales matched production and Sunshine was again left holding no inventories for
any of its products.
Requirement
Assuming the same actual production data and costs in July as for April, select whether the
gross profit in July was
A Higher under marginal costing
B Higher under absorption costing
C Exactly the same under marginal and absorption costing
Total: 20 marks
2 Kingsman Ltd
Kingsman Ltd (Kingsman) started business on 1 September manufacturing a single product, the
A356. The budgeted production cost per unit of the A356 is as follows:
£
Variable materials 78
Variable labour 12
Variable production overheads 6
Fixed production overheads 18
Absorption Marginal
£ £ £ £
Sales
Opening inventory
Closing inventory
Under/over absorption
Variable selling,
administration and
distribution
Fixed selling,
administration and
distribution
Profit/loss
2.2 In the second six months of the year Kingsman plans to introduce the B786, a deluxe version
of the A356. The budgeted total absorption cost for the B786 is £420 per unit including £40
per unit for fixed overheads. In order to set a selling price Kingsman plans to use a margin of
25% on the absorption cost.
Requirements
Select the correct answer.
If there is no inventory of the B786 at the end of the first six months of production, the profits
calculated under marginal costing will be those calculated under
absorption costing.
• Higher than
• Lower than
• The same as
2.3 Calculate the percent mark-up for the B786 using marginal costing and the planned selling
price.
3 Numan Ltd
Numan Ltd (Numan) began manufacturing a new product named Gazza in March. The budgeted
data per unit of Gazza was as follows:
3.2 The budgeted cost and resource requirements for March were all met except for materials
price and usage. Owing to higher quality supplies, only 4.5m2 of material were actually used
per Gazza but at a cost of £52 per m2. Numan absorbs fixed overheads into all its products
using a rate of 115% of actual materials cost.
Requirement
Calculate the actual absorption cost per Gazza for March.
3.3 During April the actual absorption cost per Gazza was £592 and Numan set a target of a
33.33% margin on the selling price per Gazza.
Requirement
Calculate the selling price per Gazza in April.
3.4 During May Numan changed the production process. This resulted in a saving of 30 minutes of
labour time per Gazza compared with March. Materials actual price and usage were as in
March. Actual labour and variable production overhead costs were as March’s budget. Numan
decided to absorb fixed overheads at a rate of 60% of prime cost.
Requirement
Calculate the actual absorption cost per Gazza in May.
3.5 In June, the materials usage and labour and variable overhead costs were as the March
budget, but materials were 10% cheaper per m2. The labour time per unit was the same as in
May. The fixed overhead absorption rate was £56 per Gazza and 1,400 units were produced.
Requirement
Calculate the actual marginal cost per Gazza in June.
3.6 Before finalising the selling price for July, which was to be based on the June costs, the
accountant noticed an error in the costing information and this resulted in the actual marginal
cost per unit for June being corrected. The fixed overhead per Gazza remained at its June
level. A target mark-up on absorption cost was now set.
3.7 Numan’s accountant decided to experiment with different ways of calculating the fixed
overhead absorption rate in August. In particular she wanted to see the effect of using a
blanket absorption rate (based on all of Numan’s products) on selling prices. The target mark-
up remained at 22%.
The following actual data from August is available:
Requirement
Calculate the difference in the selling price of Gazzas that results from switching from a fixed
overhead absorption rate based on Gazza’s labour hours to a blanket fixed overhead
absorption rate based on all of Numan’s products.
3.8 The budgeted blanket fixed overhead absorption rate for August was £66.25 per unit of
output.
Requirement
Calculate the total under or over absorption of fixed overheads for all of Numan’s products
using the blanket rate in August.
£ absorption
Total: 20 marks
4 Oaklea plc
Oaklea plc manufactures high quality dining tables. The standard cost per table is as follows:
£
Materials 4 kg @ £10/kg 40
Labour 12 hours @ £16/hour 192
Variable overheads 12 hours @ £4/hour 48
Fixed overheads 12 hours @ £2.50/hour 30
Total absorption cost 310
The budgeted production and sales for each month are 400 tables selling for £600 each.
In April everything went according to budget except that only 380 tables were sold.
Difference £
Favourable Adverse
£ £ £
Budgeted profit
Materials price
Materials usage
Labour rate
Labour efficiency
Total variances
Actual profit
Total: 20 marks
5 Basket Ltd
Basket Ltd (Basket) produces a range of three picnic products: Large Hampers, Medium Hampers
and Small Hampers. The budgeted data per Large Hamper for January was as follows:
5.2 In January a total of 2,400 labour hours were worked, shared equally between the three types
of hamper. The actual cost of Medium Hampers was the same as the January budgeted cost of
Large Hampers, except for materials usage. Owing to their smaller size Medium Hampers used
4 kg of material per hamper. During January Basket incurred fixed production overheads of
£85,000 of which £24,000 related to the manufacture of Medium Hampers. The other two sizes
of hampers shared the remaining fixed production overhead equally. The accountant at Basket
absorbed each hamper’s fixed overheads into output using a rate per labour hour based upon
actual labour hours worked.
Requirement
Calculate the actual absorption cost per Medium Hamper in January.
5.3 During January the actual absorption cost per Large Hamper was £165 and Basket’s
accountant recommended setting all its selling prices using a target mark-up of 40% on the
actual absorption cost per unit.
Requirement
Calculate the selling price per Large Hamper in January.
5.4 During February, Basket took delivery of new weaving equipment that resulted in a 22%
reduction in the labour time per unit for each hamper size from the January level. However, as
a result of the new equipment, February’s fixed production overheads were 10% higher than
their level in January. Material costs and usage and variable overheads were at the same level
as budgeted for January, as was the volume of output for all products.
Requirement
Calculate the fixed overhead absorption rate per labour hour in February for Large Hampers.
5.5 During March, the materials usage and variable overhead costs for Large Hampers were the
same as February but due to movements in foreign exchange rates the materials cost was 15%
higher per kg. The labour time per unit was the same as the January budget adjusted for the
saving made in February. The fixed overhead absorption rate was £48 per hamper.
Requirement
Calculate the absorption cost per Large Hamper in March.
5.6 When preparing the monthly cost reports for March, Basket’s accountant calculated the
absorption cost per Small Hamper to be £84. In order to stimulate demand a target margin of
20% was set.
Requirement
Calculate the selling price per Small Hamper for March.
5.7 Basket’s board asked the accountant to demonstrate the effect of calculating the fixed
overhead absorption rate in different ways. In particular it wanted to see the effect of using a
blanket absorption rate (based on all of Basket’s hampers) on selling prices. The target margin
remained at 20%.
5.8 The budgeted company-wide blanket fixed overhead absorption rate for April was £38 per
hamper.
Requirement
Calculate the total under or over absorption of fixed overheads for all three hamper sizes using
Basket’s wide blanket absorption rate in April.
£ absorption
Total: 20 marks
6 Geartop plc
Geartop plc (Geartop) manufactures components for the car industry. Data for three of its products
for July was as follows:
Closing inventory (in units) for each product was 10% of July’s production. The variable labour rate is
£12 per hour and Geartop’s fixed overheads for these three products for July were £80,000. There
was no opening inventory of any of the products.
Requirement
6.1 Calculate the total value of the cost of sales for each product for July using marginal costing.
AVX12: £
PUH78: £
YTF65: £
Requirement
Calculate the total value of the closing inventory for each product line for August using
marginal costing.
AVX12 £
PUH78 £
YTF65 £
6.4 During September Geartop sold all the units it produced during the month together with the
entire opening inventory of the three product lines. Sales price, absorption cost, production
and inventory information for September was as follows:
Requirement
Assuming fixed production overheads of £81,300 were incurred during September and that
there was a total of £4,950 of fixed production overheads included in the absorption costing
value of opening inventory, complete the table below which calculates Geartop’s profit for
September under marginal costing and absorption costing.
AVX12
PUH78
YTF65
Gross profit
6.5 In October Geartop sold all the units of each product that it produced.
7 Borehole Ltd
Borehole Ltd (Borehole) is a specialist manufacturer of water pumps for the water extraction industry.
Borehole produces three types of pumps and data for these for May was as follows:
7.1 Borehole has a variable labour rate of £10 per hour and its fixed overheads for these three
pumps for May totalled £22,000. There was no opening inventory of any of the pumps.
Requirement
Calculate the total value of the cost of sales for each pump for May using marginal costing.
High load: £
Standard load: £
Low load: £
7.2 The board of directors of Borehole has decided to stop using marginal costing and instead
adopt absorption costing.
Requirement
Calculate the fixed overhead absorption rate as a percentage of the labour cost for May.
7.3 During June Borehole’s accountant calculated the company’s fixed overhead absorption rate
as £6 per labour hour. She also calculated the value of the closing inventory for each pump
type using absorption costing as below. The labour cost remained at £10 per hour.
Requirement
Calculate the total value of the closing inventory for each pump type for June using marginal
costing.
High load: £
Standard load: £
Low load: £
7.4 July was a very dry month with almost no rainfall and as a consequence Borehole sold all the
pumps it could produce during the month together with the entire opening inventory of the
three pump types. Fixed production overheads for July were £31,000 and the sales price,
absorption cost, production and inventory information for July was as follows:
Requirement
Assuming there was a total of £1,170 of fixed production overheads included in the
absorption costing value of opening inventory, complete the table below which calculates
Borehole’s profit for July under both marginal costing and absorption costing.
High load
Standard load
Low load
Gross profit
7.5 In August the dry weather ended and Borehole did not sell all the pumps that it produced but
the month’s production data and costs were the same as in July.
Requirement
Select the correct answer.
8 Jitinder plc
Jitinder plc (Jitinder) started business on 1 January manufacturing a single product, the Gromett. The
budget includes the following for production costs per Gromett:
Variable materials: 4 kg @ £15/kg
Variable labour: 2.5 hours @ £16/hour
Variable production overheads: £10/unit
The budgeted production and sales for the first year is 4,800 Grometts, selling for a budgeted price
of £300 each. Budgeted fixed production overheads are £192,000 per annum. Jitinder uses a pre-
determined fixed overhead absorption rate.
Selling, administration and distribution costs are partly fixed and partly variable as follows:
Fixed: £27,000 per quarter
Variable: £7 per unit
8.1 Inventory at the end of January was 55 Grometts. In February Jitinder sold 440 Grometts and
manufactured 420. Budgeted fixed costs are incurred evenly over the year. Actual costs and
the selling price were as budget except for the fixed selling, administration and distribution
costs, which were 12% higher than budgeted and fixed production overheads, which were
£16,374.
Requirement
Calculate the profit or loss for February using both absorption costing and marginal costing.
Enter costs as negative values.
Absorption Marginal
£ £ £ £
Sales
Variable production
costs
Fixed production costs
absorbed
Opening inventory
Closing inventory
Under/over absorption
Variable selling, admin
and distribution
Fixed selling, admin and
distribution
Profit/loss
8.2 In its second year of business, Jitinder plans to introduce a basic version of its product known
as the Salis, which is budgeted to have a far greater volume of sales than the Gromett and will
£
Total: 20 marks
9 Flag Ltd
Flag Ltd (Flag) has been trading for many years and manufactures just one product, the Standard.
Flag’s accountant has prepared a budget, for its next quarter (September to November) that shows
the following production cost information per unit of Standard:
£
Variable materials 3.50
Variable labour 6.50
Variable production overheads 1.00
Fixed production overheads 4.00
15.00
Budgeted sales and production are to equal 4,400 units at a budgeted selling price of £35 per
Standard.
Flag’s accountant is aware from past experience that the company’s sales, administration and
distribution costs are partly fixed and partly variable as follows:
Variable element: £3.00 per unit
Fixed element: £12,000 per quarter
9.1 Inventory at the end of August was 115 Standards. In the quarter September to November,
Flag manufactured 4,200 Standards and sold 4,215. Flag’s budgeted fixed costs are incurred
evenly throughout its financial year. Flag’s actual costs and the selling price were as budget
except for the fixed element of the sales, administration and distribution costs, which were 4%
higher than budgeted.
Requirement
Calculate Flag’s profit or loss for the quarter September to November under both marginal
costing and absorption costing.
Enter costs as negative values.
Absorption Marginal
£ £ £ £
Sales
Variable
Profit/loss
9.2 Following extensive market research, Flag has decided to launch a low-cost product called the
Substandard. The budgeted total absorption cost is £9 per Substandard including £2 per unit
for fixed costs. In order to set a selling price Flag’s accountant plans to apply a mark up of 60%
to the total absorption cost. During the first year of manufacture the Substandard will not be
marketed, with all production going into inventory. By the end of the second year of
manufacture the aim is to keep inventory levels as close to zero as possible, with production
more or less keeping pace with sales.
Requirements
If there is a high inventory of the Substandard at the end of the first year it is manufactured, but
no inventory at the end of the second year, will the profits calculated under absorption costing
for the second year be higher or lower than those calculated under marginal costing?
They will be .
• Higher
• Lower
9.3 Calculate the % margin for the Substandard using marginal costing and the planned selling
price.
%
Total: 20 marks
£
Plastic material 2 kg @ £12/kg 24.00
Labour 3 hours @ £22/hour 66.00
Variable overheads 3 hours @ £5.50/hour 16.50
Budgeted production and sales for August are 1,200 units selling for £199.50 each. Budgeted fixed
overheads are £300,000 per quarter incurred evenly each month.
Actual results for August are as follows:
1,290 units were produced and sold at a price that was £10 per unit less than the budget. The cost of
material was £29,025 and there was a favourable usage variance of 0.2 kg per unit because better
quality plastic was used. Labour worked 3,600 hours and received a 3% pay rise at the start of
August. Fixed and variable overheads were £98,765 and £21,600 respectively.
Requirement
Complete the table below to generate the operating statement for August.
Make one entry (adverse or favourable) for each variance and enter a zero or dash in the other
column.
Enter the net total of adverse and favourable variances as either a positive number (favourable total)
or negative number (adverse total) in the final column.
Operating statement for August
Favourable Adverse
£ £ £
Budgeted contribution
Materials price
Materials usage
Labour rate
Labour efficiency
Actual profit
Total: 20 marks
£
Skilled labour 4 hours @ £10/hour 40
Raw material 4 metres @ £6/metre 24
Variable overheads 4 hours @ £4/hour 16
Yarn’s budget for November is to manufacture and sell 1,200 units of Knit at a selling price of £105
per unit. Yarn has budgeted fixed overheads of £72,000 per annum, which are incurred evenly
throughout the year.
Yarn’s actual results for November are as follows:
In total 110% of the budgeted number units of Knit were manufactured and sold, although the
average selling price achieved was £5 per unit below budget.
The total skilled labour variance was £2,200 adverse, with 5,200 hours worked. The total materials
variance was also £2,200 adverse with raw materials usage of 5,100m. Yarn’s fixed and variable
overheads were £5,500 and £23,400 respectively.
Requirement
Complete the operating statement table below for the month of November.
Make one entry (adverse or favourable) for each variance and enter a zero or dash in the other
column.
Enter the net total of adverse and favourable variances as either a positive number (favourable total)
or negative number (adverse total) in the final column.
Favourable Adverse
£ £ £
Budgeted contribution
Materials price
Materials usage
Total variances
Actual profit
Total: 20 marks
12.2 In 20X1 Johnson & Redmond worked 30,000 labour hours, split as follows:
Labour hours
Small 8,000
Medium 12,000
Large 10,000
During the year the company incurred fixed production overheads of £336,000 of which
£216,000 related to the manufacture of Large cartons. Small and Medium cartons shared the
remaining fixed production overhead equally. All fixed overheads are absorbed into output
using a rate per labour hour based upon actual labour hours worked. Each carton took two
hours to produce.
Requirement
Calculate the actual absorption cost per unit of output for Medium cartons in 20X1.
12.3 During 20X1 the actual absorption cost per Large carton was £44 and the accountant of
Johnson & Redmond decided to set all its selling prices using a target mark up of 25% on the
absorption cost per unit.
Requirement
Calculate the selling price of Large cartons in 20X1.
12.4 During the following year, 20X2, Johnson & Redmond introduced a streamlined manufacturing
process that resulted in a reduction of 10% in labour time per carton from the level in 20X1.
However, as a result of other changes, the fixed production overheads were 5% higher than
their level in 20X1. Material costs and usage and variable overheads were at the same level as
for 20X1, as was the volume of output for all products.
Requirement
Calculate the fixed overhead absorption rate per labour hour for Large cartons in 20X2.
12.6 When the actual cost reports for 20X3 became available they showed that the absorption cost
per unit for Small cartons was £40. In order to stimulate sales demand for 20X4 a target margin
of 15% was set.
Requirement
Using this data for Small cartons for 20X3 and the target margin, calculate the selling price for
20X4.
12.7 Johnson & Redmond’s managing director asked to see the effect of calculating the fixed
overhead absorption rate in different ways. In particular she wanted to see the effect of using a
blanket absorption rate (based on all of the company’s products) on selling prices. The target
margin remained at 15%.
During 20X4 the company manufactured 5,000 cartons of each size and the variable cost for a
Medium carton was £50. In 20X4 total fixed overheads were £350,000 of which 35% were
attributable to Medium cartons. Labour hours per unit remained in line with the 20X3 budget.
Requirement
Calculate the decrease in the selling price of a Medium carton achieved by switching from a
fixed overhead rate absorption rate based on the specific carton’s labour hours to a single
blanket fixed overhead absorption rate based on all three carton sizes.
12.8 The budgeted company-wide blanket fixed overhead absorption rate for 20X4 was £22.50 per
carton.
Requirement
Calculate the total under or over absorption of fixed overheads for all three carton sizes using
the company-wide blanket absorption rate in 20X4.
£ absorption
Total: 20 marks
13 Kaytering plc
Kaytering plc is a multinational business that has many subsidiaries operating in various parts of the
catering industry. Data relating to two of these subsidiaries is shown below.
Restaurants subsidiary
The average weekly trading results in August for one restaurant are shown below:
£ £
Sales 42,000
Meat, fruit, vegetables and
drinks 23,100
Power 4,200
13.1 The average selling price of each meal was £60. All costs may be regarded as varying with the
number of meals served except for staff costs that are semi-variable with a fixed element of
£3,000 per week and premises costs that are fixed.
Requirement
Calculate the number of meals (to the nearest whole meal) that would need to be sold to earn
a profit of £4,000 per week.
13.2 In October the restaurant’s head chef proposes that take-away meals are offered in addition to
those served in the restaurant. He estimates 1,080 take-away meals could be sold at £18 each
per week at a variable cost of £10.50 each. Incremental fixed costs per week would be £9,150.
All other cost and revenue data for existing restaurant meals is the same as in August.
Requirement
Calculate the additional profit or loss that the restaurant would earn per week from
introducing take-away meals.
13.3 The restaurant manager points out that the head chef has ignored the following three items in
her calculation:
• Volume purchasing discounts would result in a saving of 12.5% on meat, fruit, vegetable
and drinks costs per existing restaurant meal.
• Recyclable packaging costs would amount to £0.75 per take-away meal.
• The take-away meals service would need to be advertised at a cost of £200 per week.
Requirement
Fill in the blanks below using either “profit” or “loss” and calculating the figure to the nearest £.
If the three additional items are allowed for in the appraisal of the take-away meals proposal,
they alone would result in an additional of £ per week.
13.4 In December the restaurant manager has budgeted the following data:
Because of Christmas, labour time for cooking both types of meal is limited to a total of 450
hours per week.
Requirement
Calculate the maximum contribution that can be earned per week in December.
years
13.6 Calculate the net terminal value at the end of year 3 for the arc welder (to the nearest £1,000)
compounding at an 8% cost of capital.
13.7 Calculate the net present value of the gloss painter (to the nearest £100) using a 15% cost of
capital.
13.8 Calculate the accounting rate of return (to the nearest whole %) of the mixing machine using
the average investment.
13.9 Interpolate the internal rate of return of the rapid baker using costs of capital of 10% and 15%
(to the nearest whole %).
%
Total: 20 marks
14 Baybee plc
Baybee plc (Baybee) manufactures hand-made cots for babies and is currently preparing its budget
for February and has provided the following information:
Standard
Materials per unit at £8/metre 17 metres
Labour per unit at £22/hour 14 hours
Variable overheads (total for 310 units) £6,510
Because of holidays one quarter of the labour time required for the production of the Standard will
be overtime which is paid at a premium of 40% above the normal rate.
Actual total overhead costs for the Deluxe in the last 6 months
Units produced £
August 52 16,300
September 51 16,020
October 50 16,200
November 60 16,440
December 70 16,680
January 55 16,300
14.1 Baybee wishes to use this data to budget fixed and variable overheads for February.
Requirements
Calculate the budgeted total sales revenue for February.
14.2 Calculate the budgeted production for February of the Basic and the Deluxe.
Basic Deluxe
Production (units)
14.3 Calculate the budgeted total direct cost of the 310 units of the Standard to be produced in
February.
14.4 If the budgeted fixed overhead absorption rate per labour hour for the Standard is £23,
calculate the budgeted total fixed overheads for the Standard for February.
14.5 Using the high low method, calculate the budgeted total fixed overheads and variable
overheads per unit for the Deluxe.
14.6 Baybee is also preparing its cash budget for the period May to July. Total sales of the Basic,
Standard and Deluxe are budgeted to be £700,000 in each month from March to May,
£750,000 in June and £800,000 in July.
25% of sales in any month are for cash. Cash customers receive a 1.5% discount.
The balance of sales is made on credit. 70% of credit customers pay after a month, 25% pay
after two months and the remainder is written off as bad debts.
Sales of the Standard are budgeted to be 320 units per month in the period March to May,
rising to 330 units in June, 350 units in July and 380 units in August.
Production takes place in the month before sale. Labour and materials costs per unit of the
Standard are budgeted at the same level as for February above. No overtime will be necessary
after February. Materials are purchased in the month before production and are paid for two
months later. Baybee receives a 2% settlement discount on these purchases. Half of labour
costs are paid for in the month of production, with the balance the month after.
Requirement
Prepare the following cash budget extracts for the period May to July.
You should make an entry in every box in the cash budget. Enter a zero or dash where
applicable. Do not leave any boxes blank. All figures should be entered to the nearest £.
Total: 20 marks
15 McCarthy plc
McCarthy plc (McCarthy) manufactures a number of products, one of which is Product Z. Estimated
costs for March for Product Z are as follows:
£ £
Variable materials 40 40
£ £
Variable labour 30 30
Production overheads 15 10
Other overheads 10 8
95 88
15.1 Total fixed costs are unaffected by the volume of output. McCarthy has budgeted to sell
35,000 units in March at a price of £120 each.
Requirement
Calculate the breakeven number of units (to the nearest whole unit) for March.
Breakeven (units):
15.2 In April, McCarthy is considering a new production method for Product Z. Using the existing
production method, the budget for April for Product Z shows a variable cost of £80 per unit, a
selling price of £150 per unit, total fixed costs of £1,400,000 and sales demand of 35,000
units.
The new production method would cause the total fixed costs to increase by 15% and the
variable cost per unit to reduce by 10%. Owing to an increase in Product Z’s quality with the
new production method, the selling price per unit would be increased by 12%.
Requirement
Calculate how many fewer units (to the nearest 100) would need to be sold using the new
production method to give the same budgeted profit for April as the existing production
method.
15.3 In May, McCarthy’s budget shows it generating a contribution equal to 40% of monthly sales of
Product Z of £3,000,000. McCarthy is considering introducing a new special edition version of
Product Z in order to stimulate demand and this will cause the budgeted sales of the original
version of Product Z to increase by an estimated 10%. The special edition version is expected
to have a variable production cost of £100 per unit and packaging and distribution costs of
£20 per unit. Sales of the special edition version, at a price of £110 per unit, are expected to be
6,000 units in May.
Requirement
Calculate how much the introduction of the special edition version of Product Z will increase
McCarthy’s budgeted profit by in May.
Increase in profit: £
15.4 In June, the single raw material from which McCarthy manufactures Products X, Y and Z is
expected to be in short supply. Product details for June are budgeted to be as follows:
Product X (units):
15.5 In July, McCarthy decides to replace the machine that manufactures Product Z. Two alternative
machines have been identified.
Machine L7
Machine L7 has the following cash flows:
Requirements
Calculate (to the nearest whole year) the payback period for machine L7.
Payback: years
15.6 Calculate (to the nearest whole %) the Internal Rate of Return (IRR) of machine L7, using
discount rates of 10% and 20% pa.
IRR: %
15.7 Machine M8
Machine M8 generates the following cash flows and profits:
Requirements
Calculate the Accounting Rate of Return (ARR), to the nearest whole %, based on the initial
investment machine M8.
ARR: %
15.8 Calculate the net present value (NPV) (to the nearest £1,000) for machine M8 at a discount rate
of 15% pa.
NPV: £
Total: 20 marks
May June
£ £
Sales revenue 21,000 22,000
General expenses 3,400 3,200
• Sales revenue and general expenses for July to September are budgeted to be:
• It has been determined from the customer collection records of Glasstop that cash sales account
for 30% of total sales. The credit sales customers pay two months after sale. One credit customer,
who bought goods for £300 in May, was declared bankrupt a few days after the sale and will not
be able to pay Glasstop.
• Glasstop wishes to set up a general bad debt provision of £500 for September.
• General expenses are paid in the month following the month in which they were incurred.
• The cost of purchases is 25% of sales revenue each month. Glasstop currently pays for purchases
two months later. However, for purchases made in June and purchases thereafter, Glasstop has
agreed with the supplier that it will take three months to pay.
• From July, Glasstop will be renting new premises. The rent and rates will be £5,000 per month
payable in the month in which they are incurred. Staff will be expected to work longer hours and
therefore current staff costs of £3,000 per month will increase by 10% from July. Staff costs are
paid in the month in which they are incurred.
• Taxable profit for last year amounted to £8,200 and the tax on this (at a rate of 20%) is due to be
paid in September.
• New machinery will be purchased on 1 June at a cost of £12,000, payable in three equal
instalments in June, July and August. The scrap value is estimated to be £2,000 in three years’
time. Old machinery with a net book value of £5,000 is to be disposed of in July for a cash receipt
of £1,000.
• New fixtures and fittings will be purchased for £10,000 and will be paid for in full in July. The
estimated scrap value is £1,500 in four years’ time.
• Monthly depreciation on the new machinery and the new fixtures and fittings is calculated on a
straight-line basis.
• Glasstop’s loan from the bank of £20,000 was received on 30 June. Interest of 0.3% on the
£20,000 is paid monthly.
Requirement
Prepare the cash budget for each of the three months ending 30 September.
You should make an entry in every box in the cash budget. Enter a zero or dash where applicable. Do
not leave any boxes blank. All figures should be entered to the nearest £.
Cash sales
Credit sales
Loan
Payments
General expenses
Purchases
Staff costs
Tax
Machinery purchase
Loan interest
Net surplus/(deficit)
Opening balance
Closing balance
Total: 20 marks
17 Treeze Ltd
Treeze Ltd (Treeze) manufactures a product called the Barc. For the first quarter of the year (quarter
1), the following budgeted information is available for the Barc:
£ per unit
Budgeted selling price 35.00
Budgeted variable production cost 10.00
Budgeted variable selling cost 4.50
60% of the administration costs are fixed costs and the remainder are variable costs.
17.1
Requirement
Calculate the breakeven point for quarter 1 (to the nearest whole unit).
units
17.2 New production methods are under consideration for quarter 2 that would lead to a total
variable cost per unit of £14 and total fixed costs of £18,300. Budgeted sales volume is
expected to be 5,200 units for the quarter.
Requirement
Calculate the sales price per unit (to the nearest whole pound) required to achieve a profit of
£80,000 in quarter 2.
17.3 In quarter 3 the budgeted contribution ratio is 45% and total fixed costs are budgeted to be
£16,000. Treeze has a target profit of £95,000 for quarter 3.
Requirement
Calculate the total sales revenue required to achieve the target profit in quarter 3 (to the
nearest £100).
17.4 Treeze is considering the manufacture of an additional product, the Leaffe, for Quarter 4.
However, labour time is restricted to 1,500 hours in total for the quarter. Product details for the
quarter are budgeted to be as follows:
Barc Leaffe
Maximum demand (units) 6,500 4,000
Variable production cost per unit £15 £20
Labour hours per unit 0.25 0.40
A subcontractor has quoted Treeze £17 per unit to supply Barc and £23 per unit to supply
Leaffe.
Requirement
Calculate how many units of Barc and Leaffe should be purchased from the subcontractor in
order to meet total demand and minimise total cost.
Barc: units
Leaffe: units
17.5 Treeze is considering purchasing a new machine, the X5, to manufacture the Leaffe. It would
have a four-year life. Cash flows and profits relating to the new machine are as follows:
years
17.6 Calculate the accounting rate of return (ARR), to the nearest whole %, based on the initial
investment for the machine.
17.7 Calculate the net present value (to the nearest £10,000) of the machine.
17.8 The original estimates for the operating cash inflows for the machine have been revised and
the NPV has been correctly calculated as £67,840 using a cost of capital of 15% throughout the
full four-year period. Treeze is also considering an alternative machine with an economic life of
four years, an immediate outlay of £274,800 in year 0 and no residual value. The machine is
expected to generate constant annual cash inflows at the end of years 1–4.
Requirement
Calculate the constant annual cash inflow (to the nearest £1,000) that the alternative machine
should generate in order to be indifferent between the two machines.
£
Total: 20 marks
£
Selling price 30
Additional information:
• Unit sales of frames are budgeted to be:
• Credit sales account for 80% of total sales. Credit customers are expected to pay in the month
following sale for which there will be a discount of 2% given. One credit customer who bought 20
frames on 3 September was declared bankrupt on 27 September, with no prospect of being able
to pay their creditors. DeeSplay also wishes to make a general provision for bad debts of £1,000
in October.
• Inventory levels will be such that production takes place the month before sale.
• Materials are purchased one month before production takes place.
• Suppliers of materials are paid two months after purchase.
• DeeSplay has some obsolete materials in inventory which cost £1,200. These will be sold on one
month’s credit in October for £250.
• Labour costs are paid in the month in which they are incurred. All other expenses are paid in the
month following that in which they are incurred.
• Fixed expenses incurred are £1,000 per month for the months of September and October and
£1,500 per month for the months of November, December and January. All fixed expenses are
paid in the month following that in which they are incurred. The fixed expenses include £200 for
depreciation of buildings per month. The buildings were revalued by a surveyor in September
and are worth £5,000 more than the net book value shown in September’s accounts. This
additional value is to be recorded in October’s accounts.
• The company is also planning to purchase a new delivery vehicle costing £25,000, which will be
paid in full in October. The estimated scrap value is £4,000 in 3 years’ time.
• On 1 November, additional machinery will be purchased at a cost of £15,000 payable in three
equal installments in November, December and January. The estimated scrap value is £1,000 in
four years’ time.
• Depreciation is calculated straight line per month and a full month’s depreciation is charged in the
month of purchase.
Cash sales
Credit sales
Sale of obsolete
materials
Revaluation of buildings
Payment to suppliers
Loss on sale of obsolete
materials
Labour
Variable production
overheads
Fixed expenses
Machinery purchase
Delivery vehicle plus
machinery total
depreciation
Tax paid
Overdraft interest
Net surplus/(deficit)
Opening balance
Closing balance
3 A business has ascertained that its total costs (TC) can be estimated for any level of production (P)
and sales (S) according to the following equation:
TC = (£5 × P + £1,000) + (£2 × S + £500)
Requirement
If the production level was 500 units and sales were 400 units, what would be the company’s fixed
costs?
A £1,500
B £4,800
C £3,500
D £3,300
LO 1b
4 At the beginning of week 5 there were 600 units of material M held in inventory, valued at £6 per
unit.
The following purchases and issues occurred during the subsequent four-week period.
Issues to
Purchases production
Week Units Cost per unit Units
£
5 – 350
6 400 8 –
7 – – 300
8 100 9 –
Inventory is valued using a periodic weighted average price calculated at the end of each four-week
period.
Requirement
To the nearest £, the value of the inventory at the end of week 8 is
A £3,150
B £3,431
C £3,450
D £3,690
5 Budgeted fixed overheads for cost centre 1 during the last accounting period were £64,800 for
apportioned overheads and £95,580 for allocated overheads. A predetermined machine hour rate is
used to absorb fixed overheads into product costs. Budgeted machine hours during the period were
1,800. Actual fixed overheads were £178,200 and actual machine hours for the period were 1,782.
Requirement
What was the fixed overhead absorption rate per machine hour?
A £89.10
B £90.00
C £99.00
D £100.00
LO 1c
7 Job number 352 requires 270 hours of active labour. It is expected that 10% of labour’s total time will
be idle time. The wage rate is £8 per hour.
Requirement
What is the labour cost for the job?
A £300
B £2,160
C £2,376
D £2,400
LO 1d
8 Halcow Ltd operates a job costing system and its standard net profit margin is 20% of sales value.
The estimated costs for job 173 are as follows:
• Direct materials: 5 metres @ £20 per metre
• Direct labour: 14 hours @ £8 per hour
Variable production overheads are recovered at the rate of £3 per direct labour hour.
Fixed production overheads for the year are budgeted to be £200,000 and are to be recovered on
the basis of the total of 40,000 direct labour hours for the year.
Other overheads, in relation to selling, distribution and administration, are recovered at the rate of
£80 per job.
Requirement
The selling price to be quoted for job 173 is
The capital invested in manufacturing and distributing 953 units of the Super per annum is estimated
to be £136,200.
Requirement
If the required annual rate of return on capital invested in each product is 14%, the selling price per
unit of the Super must be
A £102.62
B £153.14
C £163.79
D £163.91
LO 1e
10 A company has two divisions, A and B. Division A transfers one third of its output to B and sells the
remainders to the external market for £14 per unit. The transfers to division B are made at the
transfer price of cost plus 20%.
Division B incurs costs of £4 per unit in converting the transferred units before selling them to
external customers for £20 per unit.
Division A costs amount to £10 per unit and the budgeted total output for the period is 270 units.
There is no budgeted change in inventories for either division.
Requirement
The reported profits for the period will be
A Division A: £900 profit; Division B: £360 profit
B Division A: £900 profit; Division B: £720 profit
C Division A: £900 profit; Division B: £1,440 profit
D Division A: £1,332 profit; Division B: £72 loss
LO 1f
11 The ICAEW Code of Ethics exemplifies which of the following theoretical approaches to ethical
codes?
A A rules-based approach
B A framework-based approach
C A compliance-based approach
D A tick box approach
12 Sales data for Product H4 follows a pattern of peaks and troughs that last three months.
1 240
2 270
3 210
4 250
Requirement
Using the additive model, which of the following are true for month 2?
A The trend is 240 and the seasonal variation is –30.
B The trend is 720 and the seasonal variation is –450.
C The trend is 240 and the seasonal variation is +30.
D The trend is 720 and the seasonal variation is +450.
16 A division has a residual income of £480,000 and a net profit before imputed interest of £1,280,000.
Requirement
If it uses a rate of 10% for computing imputed interest on its invested capital, what is its return on
investment?
A 10%
B 22%
C 6%
D 16%
LO 3b
17 A division currently has an annual return on investment (ROI) of 20% on its investment base of
£1,200,000. The following additional projects are being considered:
Investment
Project outlay Annual profit ROI
£’000 £’000 %
K 300 100 33
L 700 210 30
M 500 130 26
N 200 44 22
Requirement
Which combination of investments will maximise the division’s return on investment assuming
unlimited capital is available?
A K, L, M and N
B K, L and M only
C K and L only
D K only
LO 3b
18 In a period, 11,280 kg of material were used at a total standard cost of £46,248. The material usage
variance was £492 adverse.
Requirement
What was the standard allowed weight of material for the production achieved?
A 10,788 kg
B 11,160 kg
C 11,280 kg
D 11,400 kg
LO 3c
20 The following information relates to Product M, made and sold by Nan Ltd.
Nan Ltd budgeted for a sales volume of 1,000 units, but actually sold 100 units less than this.
Requirement
Which of the following shows the correct calculation of the sales price and contribution volume
variances?
A Sales price variance = £1,800 favourable; Sales volume variance = £2,000 adverse
B Sales price variance = £2,000 favourable; Sales volume variance = £900 adverse
C Sales price variance = £2,000 favourable; Sales volume variance = £2,000 adverse
D Sales price variance = £1,800 favourable; Sales volume variance = £900 adverse
LO 3c
21 The materials price variance was favourable in June because the purchases manager found a new,
cheaper materials supplier. In July, the production manager was blamed for the large adverse labour
efficiency variance.
Requirement
What type of bias has occurred?
A Survivorship
B Cognitive
C Omitted variable
D Confirmation
23 The shared service centre (SSC) of Brilliant Job Ltd contains its human resource management,
payroll, accounting and IT functions. It has developed a service level agreement (SLA) with its internal
clients in the various business units of Brilliant Job Ltd. This SLA places great importance on service
quality, and particularly focuses on the accuracy of the work that the SSC performs.
Requirement
Which of the following performance measures reflects this focus on accuracy?
A Percentage of employment contracts sent out without errors
B Speed in dealing with IT user queries
C Number of sales invoices raised
D Timely removal of ex-employees from the payroll database
LO 3f
24 Uula plc makes a single product, which it sells for £16 per unit. Fixed costs are £76,800 per month
and the product has a contribution ratio of 40%.
Requirement
In a month when actual sales were £224,000, Uula plc’s margin of safety, in units, was
A 2,000
B 12,000
C 14,000
D 32,000
LO 4a
25 A company has budgeted sales revenue of £500,000 for Period 1, with an associated contribution of
£275,000. Fixed production costs are £137,500 and fixed selling costs are £27,500.
Requirement
What is the breakeven sales revenue?
A £165,000
B £250,000
C £300,000
D £366,667
LO 2a
Labour
Product Unit contribution requirement
£ Hours
Scratch 6 2
Purr 7 3
Buzz 8 3
Due to industrial action only 2,600 labour hours are available next period, when expected demand is
700 units of each product. Fixed costs are £1,700 for the period.
Requirement
What is the maximum profit that can be achieved next period?
A £5,062
B £5,700
C £6,100
D £13,000
LO 4b
27 Jethro Ltd manufactures three products, the selling prices, maximum demand and cost details of
which are as follows.
X Y Z
£ £ £
Unit selling price 150 190 190
Unit costs
Materials (£10/kg) 20 10 30
Labour (£8/hr) 32 48 40
Variable overheads 16 24 20
Fixed overheads 48 72 60
Maximum demand (units) 590 840 660
In the forthcoming period direct materials are restricted to 1,400 kg and the company has contracted
to supply 100 units of Z and 130 units of Y to a customer (included in the maximum demand figures
above).
Requirement
What is the profit-maximising production plan?
A X: 130 units; Y: 840 units; Z: 100 units
B X: 280 units; Y: 840 units; Z: Nil units
C X: Nil units; Y: 2 units; Z: 466 units
D X: 1 unit; Y: 840 units; Z: 186 units
LO 4b
28 An investment will generate cash flows of £1,800 each year in Years 3 to 7 (ie, first amount to be
received three years from now). The discount rate is 15% per annum.
29 Alesme Ltd needs to replace a major item of capital equipment in five years’ time. The estimated
replacement cost will be £750,000. Funds for the replacement will be provided by setting aside five
equal annual sums and investing them at 10%. The first amount will be invested immediately, the last
in four years’ time.
Requirement
What is the annual amount to set aside (to the nearest £100)?
A £111,700
B £122,800
C £179,900
D £197,800
LO 4c
30 A project has a normal pattern of cash flows (ie, an initial outflow followed by several years of
inflows).
Requirement
What would be the effects on the internal rate of return (IRR) of the project and its discounted
payback period (DPP) of an increase in the company’s cost of capital?
A IRR: Increase; DPP: Decrease
B IRR: Increase; DPP: Increase
C IRR: No change; DPP: Increase
D IRR: No change; DPP: Decrease
LO 4c
31 A company is considering a two-year project which has two annual internal rates of return, namely
10% and 25%. The sum of the undiscounted cash flows is positive.
Requirement
The project will necessarily have a positive net present value, when the annual cost of capital is:
A More than 25%
B More than 10%
C Between 10% and 25%
D Less than 25%
LO 4c
32 In a comparison of the Net Present Value (NPV) and Internal Rate of Return (IRR) techniques, which of
the following statements is true?
A Both methods give the same accept or reject decision, regardless of the pattern of the cash
flows.
2 Correct answer(s):
C dividends received
Dividends received are not related to the production process. This is income received from
investments. Cost accountants are only interested in income and costs relating to production (or
manufacturing).
Indirect labour is incorrect. The cost accountant is interested in the cost of indirect labour as it affects
the cost per unit of production.
Purchase of raw materials is incorrect. The cost accountant is interested in the cost of raw materials as
it affects the cost per unit of production.
Factory rent is incorrect. The cost accountant is interested in factory rent as it affects the cost per unit
of production.
3 Correct answer(s):
B be constant per unit of output
Variable costs are constant per unit of output. As output changes, total variable costs will vary in
direct proportion to the level of activity.
Variable costs are not conventionally deemed to be constant in total when the production volume
changes. This is a definition of fixed costs, ie, costs which do not change as outputs change.
Variable costs are also not deemed to vary per unit of output as production volumes change.
Variable costs are constant per unit regardless of output levels.
Variable costs do not vary, in total, from period to period when production is constant. If production
is constant, variable costs will also be constant.
4 Correct answer(s):
D Lease payments on a machine
The decision to take out a lease would have been made by the finance function and not be of
relevance to production.
A supervisor would be concerned with material costs because he or she is responsible for the
efficiency with which materials are used.
A supervisor would be concerned with labour costs because he or she is responsible for the
efficiency with which labour work.
A supervisor would be concerned with maintenance costs because he or she is responsible for the
manner in which machines are operated.
SAMPLE EXAM
5 Correct answer(s):
C £5.00
Cost per unit = Total cost/Number of patients treated
6 Correct answer(s):
C £36,744
7 Correct answer(s):
A a semi-variable cost
The basic salary is fixed, but the sales representative also receives commission, which increases as
sales increase. The cost is therefore best described as semi-variable.
A fixed cost is incorrect. As the salary is made up of both fixed and variable elements it is a semi-
variable cost.
A variable cost is incorrect. The commission is variable, but the sales representative also receives a
basic salary which is fixed.
A production cost is incorrect. This cost relates to sales not to production.
8 Correct answer(s):
A the total of all direct costs
In other words, prime cost is the total of all the costs that can be directly attributed to a cost unit.
Total manufacturing cost would include overheads in addition to the costs that are directly
attributable to a cost unit.
Fixed costs attributed to a cost unit are not the prime cost because the variable costs have not been
considered.
Any cost which does not vary with changes in output levels is a description of a fixed cost.
10 Correct answer(s):
A Variable costs
For example, fixed costs do not vary with output levels.
11 Correct answer(s):
A a semi-variable cost
As the salary contains both a fixed element (the basic wage) and a variable element (the £0.10 paid
per unit) the wage expense is a semi-variable cost.
It is not a fixed cost, because the total amount paid each week varies with the amount produced
during the week, nor a variable cost, as even if no units were produced the supervisor would still
receive the basic salary (£100).
And finally it is not a step cost, because it does not remain constant for a given range of output, and
then ‘step up’ to a new level, but increases (by £0.10) for each additional unit produced.
12 Correct answer(s):
B Graph 2
The cost consists of a fixed amount up to a certain level of activity which is represented by a straight
horizontal line on the graph. At a certain point a variable element is introduced and the cost line
slopes upwards at a constant rate as the level of activity increases.
13 Correct answer(s):
A A step cost
As the hiring cost remains fixed within certain activity levels it is a step cost.
Although the cost may increase with output it remains constant for certain activity levels. It is
therefore not a variable cost.
If the factory made between 1 and 100 toys in one month the cost would be £1,000. However, if they
made 101 toys they would need two production lines, and therefore two machines. The cost would
then be £2,000. As this cost can be seen to increase with output it cannot be fixed.
This cost remains constant within a range of activity levels. It is therefore not a semi-variable cost.
14 Correct answer(s):
D a fixed administrative cost
As the salary paid to the financial accountant is unlikely to change if output levels change the cost is
fixed, and as the expense relates to the business’s administration it is an administrative cost.
A variable administrative cost is incorrect. This cost is unlikely to vary as output changes, therefore
this cost is more likely to be a fixed cost.
A fixed production cost is incorrect. An accountant’s salary is incurred as part of the business’s
administration not production.
15 Correct answer(s):
A Electricity bills made up of a standing charge and a variable charge
The cost shown in the graph has a basic fixed element which is payable even at zero activity, with a
variable element being added at a constant rate as activity increases. Therefore, the correct answer is
where electricity bills are made up of a standing charge and a variable charge. The cost depicted is
known as a semi-variable cost.
16 Correct answer(s):
A C = 480 + 0.01T
A standing charge of £40/month is £480 per year. Costs then increase by £0.01/minute.
SAMPLE EXAM
17 Correct answer(s):
A Fixed costs = 500. Variable costs per unit are constant until output is 30, then additional costs
per unit are higher.
The fixed costs are 500 because this is the single point at which the line crosses the y-axis (the cost
incurred at zero activity). The gradient of the total cost line becomes steeper when output exceeds
30 units, which indicates a higher cost per unit for output above 30 units.
18 Correct answer(s):
C Management accounts are usually prepared for internal use by an organisation’s managers.
The management accounts provide information to managers within a business to help them to
manage the business by making planning and control decisions. In contrast, the financial accounts
are usually prepared for stakeholders external to the organisation.
The use of cost accounting systems is not restricted to manufacturing operations. Cost accounting
information is also used in service industries, public sector bodies and not-for-profit organisations.
The format of management accounts is not regulated by accounting standards. No strict rules govern
the way the management accounts are prepared or presented: the format is entirely at managers’
discretion.
The financial accounting and cost accounting records are not prepared from different sets of basic
data. Both systems record the same basic data for income and expenditure. However, each system
has a different purpose and each therefore analyses the data in a different way.
19 Correct answer(s):
D Cost per tonne-kilometre
The most useful cost unit from those described is a tonne-kilometre. This is a composite cost unit
which takes account of both the weight carried and the distance travelled.
The cost per tonne carried is not as useful because it is affected by distance travelled. For example, it
would not be possible to compare for control purposes the cost per tonne transported on a journey
of 500 kilometres with the cost per tonne transported for 10 kilometres.
Similarly, the cost per kilometre travelled would be affected by the weight transported. It would not
be as useful as the cost per tonne-kilometre for control by comparison.
The cost per driver hour would not be as useful as a cost per tonne-kilometre because it is distorted
both by the weight carried and the distance travelled.
21 Correct answer(s):
C The line with the constant upward slope represents total costs; D represents fixed costs
The line with the constant upwards slope represents the total of fixed costs and variable costs, ie,
total costs.
The point where the total costs line cuts the y-axis, D, represents the cost incurred at zero activity, ie,
the fixed costs.
22 Correct answer(s):
D Variable costs per unit are constant until output reaches Q after which further production incurs
higher variable costs per unit.
The line representing fixed costs remains horizontal for all levels of output, therefore the first two
statements are incorrect.
The increase in the gradient of the total cost line at Q indicates that each unit, from that level of
output onwards only, incurs a higher variable cost. Therefore, the third statement is incorrect.
23 Correct answer(s):
B Variable
Labour costs will vary directly in proportion to the number of hours worked and therefore are a true
variable cost
Correct answer(s):
D Fixed
The factory rent will not vary even if output levels change and is therefore a fixed cost.
Correct answer(s):
I Semi-variable
Salary plus profit related pay will contain a fixed element, the basic salary, plus an element that will
vary depending upon the profits of the enterprise. Therefore, this will be a semi-variable cost.
24 Correct answer(s):
B An operating theatre in a hospital
D A branch of a high street bank
A, C and E are all elements of cost.
25 Correct answer(s):
D Labour used in assembling a car
E Wood used in making a chair
A, B and C are all cost objects.
26 Correct answer(s):
27 Correct answer(s):
D The principle of professional behaviour means complying with relevant laws and regulations
Objectivity means having no bias, conflict of interest or undue influence of others. Valuing inventory
so as to maximise a period’s profit is unethical. ICAEW’s ethical guidance applies to members
working in practice and in business.
28 Correct answer(s):
A Objectivity
Fundamental principle 1 – Integrity – means fair dealing, truthfulness and being straightforward
Fundamental principle 2 – Objectivity – means having no bias, conflict of interest or undue influence
of others
Fundamental principle 3 – Professional competence and due care – means having appropriate
knowledge and skill
Fundamental principle 4 – Confidentiality – means not disclosing information to third parties without
authority
Fundamental principle 5 – Professional behaviour – means complying with relevant laws and
regulations
2 Correct answer(s):
A factory overheads
Overtime premium payments are always classed as factory overheads unless the overtime is worked
at the specific request of a customer (in order to complete the specific job more quickly) or worked
regularly by a production department in the normal course of operations.
3 Correct answer(s):
D factory overhead
Idle time is usually treated as an overhead because it cannot be identified with a specific cost unit. In
this case the cost is incurred within the production department and is therefore a factory overhead.
4 Correct answer(s):
C £70
The indirect labour costs are made up of idle time costs and overtime premiums.
If you selected £20 you calculated the overtime premium correctly but did not add on the cost of idle
time payments. Wages paid for idle time cannot be traced to a specific cost unit and are therefore a
part of indirect labour cost.
If you selected £50 you classified the idle time payments correctly but did not add on the cost of the
overtime premium. If the overtime had been worked for a specific cost unit then the premium could
have been a direct labour cost of that unit, but this is not the case here.
If you selected £110 you included all of the overtime cost as an indirect labour cost. However, the
basic pay for overtime hours can be traced to specific cost units and is therefore a direct labour cost.
6 Correct answer(s):
D Direct expenses
The cost of the tools is a direct cost of the job because it can be specifically identified with the job.
7 Correct answer(s):
C 1, 2 and 4 only
Statement 1 is correct. Direct costs are specific and traceable to the relevant product, service or
department.
Statement 2 is correct. For example, a departmental manager’s salary is a direct cost of the
department but it is an indirect cost of the individual cost units passing through the department.
Statement 3 is incorrect. This describes an indirect cost which much be apportioned between several
cost objects because it cannot be specifically identified with any single one.
Statement 4 is correct. It is likely that if activity changes so will the expenditure on direct costs, as
direct costs are usually costs such as materials, labour and other direct expenses.
8 Correct answer(s):
B Indirect costs are alternatively called overheads.
Total direct costs are not always greater than total indirect costs. The relative size of direct and
indirect costs varies according to the type of output, the industry, the technology and so on. For
example, in highly automated service industries the direct material and direct labour costs are likely
to be small relative to the indirect costs.
The fixed costs per unit are not the same at all levels of production. The total fixed cost will remain
the same but the fixed cost per unit will reduce as output increases.
A direct cost will often be a variable cost, but it will not always be a variable cost. For example, the
cost of hiring a special machine for a job is a direct cost of that job but it is also a fixed cost which
remains the same irrespective of the level of output.
9 Correct answer(s):
B Direct and fixed
The repair person’s wages can be analysed between specific jobs and accordingly would usually be
classified as a direct cost. The cost is fixed because it does not vary with the level of activity.
Correct answer(s):
D Direct and variable
The cost of electrical components can be traced as a direct cost of each job and the cost will increase
as the level of activity increases.
Correct answer(s):
I Indirect and fixed
The rent of the repair shop is an indirect cost because it cannot be traced to a specific repair job. It is
a fixed cost because it does not vary with the level of activity.
11 Correct answer(s):
A £220,000
MATERIALS CONTROL ACCOUNT
£ £
263,000 263,000
12 Correct answer(s):
B First in, First out (FIFO)
C Last in, First out (LIFO)
E Standard cost
First in, Last out (FILO) and future anticipated cost are not recognised methods of valuing inventory.
13 Correct answer(s):
B £68,670
The FIFO method uses the cost of the older batches first.
If you answered £68,160 you valued all of the units sold at the opening inventory cost of £80 per
unit. However, there are only 750 units held at this cost. The cost of the remainder of the units sold
must be taken from the next batch received.
The option of £69,960 uses the LIFO basis rather than the required FIFO basis.
The option of £93,720 uses the sales revenue, not the cost of the units sold.
14 Correct answer(s):
B £23,760
The LIFO method uses the cost of the most recent batches first.
The option of £17,040 values all the units sold at the cost of the latest batch received. However, there
are only 90 units at this cost. The remaining units must be valued at the cost of earlier batches
received.
If you selected the option of £69,960 you calculated the correct cost of goods sold, but the question
asks for the gross profit earned.
The option of £93,720 is the sales revenue of the units sold, not the gross profit earned.
15 Correct answer(s):
A £33,696
16 Correct answer(s):
B £590.85
£
60 pixies received on day 3 of week 15 @ £7.96 477.60
15 pixies received in week 14 @ £7.55 113.25
75 590.85
If you selected £566.25 you ignored the receipts on day 3 of week 15 and based your calculations on
the opening inventory. However, the LIFO method uses the cost of the latest batch first.
17 Correct answer(s):
D £3,605
Components issued on day 4 = 90 from week 10 receipts
Closing inventory week 12:
£
Remaining 210 components from week 10 @ £6.50 1,365
200 components from week 11 @ £6.25 1,250
150 components from week 12 @ £6.60 990
560 3,605
If you answered £585 you selected the cost of the issues rather than the value of the closing
inventory.
The answers of £594 and £3,596 are the cost of the issues and the closing inventory respectively,
using the LIFO valuation method.
18 Correct answer(s):
D Student D
The LIFO method charges the latest prices paid to cost of sales. In a period of falling prices the latest
prices will be the lowest prices. Therefore, the student using the LIFO method would record the
lowest cost of sales and the highest gross profit.
19 Correct answer(s):
D 1, 2, 3 and 4
With FIFO, the oldest prices are charged first to cost of sales and inventory is valued at the latest
prices paid, which will be close to replacement cost.
With LIFO, the most recent prices are charged first to cost of sales, therefore inventories are issued at
a price which is close to the current market value.
20 Correct answer(s):
A higher cost of sales and lower inventory value
The LIFO method charges the latest prices paid to cost of sales. In a period of rising prices the cost
of sales will be higher than with FIFO. The remaining items in inventory will be valued at the older,
lower prices.
21 Correct answer(s):
C £7,000
If you selected the wrong option then check your working carefully against the Workings table.
Correct answer(s):
G £7,500
WORKING
22 Correct answer(s):
C each time a purchase is made
Each time a purchase is made this is likely to change the average price of the items held in inventory.
If it is required to keep prices up to date, the average price must be re-calculated each time a
purchase is made at a different price.
Each time an issue is made is incorrect because the average price of remaining inventory items is not
altered when an issue is made at the average price.
Re-calculating the average price at the end of each accounting period would not keep prices up to
date.
An inventory count is verification of physical quantities and does not require the re-calculation of
average prices.
23 Correct answer(s):
B £1,067
24 Correct answer(s):
C £840
£ £
Sales value £3 × 800 2,400
Less cost of sales:
400 × £1.80 720
400 × £2.10 840
(1,560)
Gross profit 840
£ £
Sales value £3 × 800 2,400
Less cost of sales:
600 × £2.10 1,260
200 × £1.80 360
(1,620)
Gross profit 780
2 Correct answer(s):
C To attribute overhead costs to cost units
‘To attribute overhead costs to cost centres’ describes overhead allocation and apportionment.
‘To reduce the total overhead expenditure below a predetermined level’ and ‘To ensure that the total
overhead expenditure does not exceed budgeted levels’ are more concerned with cost planning
and control than with the costing of individual products or services.
3 Correct answer(s):
B Overhead apportionment
Overhead absorption is the final process of absorbing the total cost centre overheads into product
costs.
Overhead allocation is the allotment of whole items of overhead costs to a particular cost centre or
cost unit.
Overhead analysis is the general term used to describe all of the tasks of processing overhead cost
data.
4 Correct answer(s):
D common costs are shared among cost centres
‘Costs may be controlled’ is not correct because costs are controlled using budgets and other
management information.
‘Cost units gather overheads as they pass through cost centres’ describes overhead absorption, not
overhead apportionment.
‘Whole items of cost can be charged to cost centres’ describes overhead allocation, not overhead
apportionment.
5 Correct answer(s):
D £18,300
The overheads of the canteen department are reapportioned on the basis of the number of staff
working in the production departments only.
Reapportionment of canteen overheads
If you answered £3,300 you calculated the correct amount of canteen costs to be apportioned to
machining. However, you then forgot to add on the original budgeted overheads of £15,000.
6 Correct answer(s):
A Allocated to factory
The whole of the works manager’s salary can be allocated to the factory since the manager is fully
occupied in the factory cost centre.
Correct answer(s):
D Apportioned to factory
Part of the logistics manager’s salary must be apportioned to the factory since some time is spent on
production tasks.
7 Correct answer(s):
D £10,160
If you selected £1,200 you forgot to include the original overhead allocated and apportioned to the
packing department.
If you selected £9,968 you included the four canteen employees in your calculation, but the question
states that the basis for apportionment is the number of employees in each production cost centre.
If you selected £10,080 you based your calculation on the direct employees only.
8 Correct answer(s):
A Costs can be allocated where it is possible to identify which department caused them.
C Costs need to be apportioned where they are shared by more than one department.
D There is no need for a single product company to allocate and apportion overheads in order to
determine overhead cost per unit.
Although supervisors’ salaries might be apportioned over more than one department or cost centre,
it is more likely that a supervisor would work in a single cost centre. Therefore, supervisors’ salaries
are likely to be allocated rather than apportioned.
The process of apportioning overhead costs is arbitrary. There is no single ‘correct’ result.
10 Correct answer(s):
C £7.20
Total labour hours = (1,000 × 4) + (2,000 × 6) + (3,000 × 3) = 25,000 hours
Overhead per labour hour = £30,000/25,000 = £1.20 per hour
Overhead content per unit of Product B = £1.20 × 6 = £7.20
If you selected £1.20 you calculated the correct absorption rate per labour hour. However, you
should then have applied this rate to the number of labour hours per unit of product B.
A fixed overhead cost of £5 per unit is incorrect because it is calculated by simply determining a
single rate per unit for all 6,000 units produced. However, the different number of labour hours for
each unit of product indicates that each places a different burden on resources. This is reflected in
the absorption of overheads on the basis of labour hours.
If you selected £30 you calculated the simple rate of £5 per unit as described above. However, you
then went on to take account of the six hours worked on product B and so created a ‘hybrid’
absorption method which mixes two bases.
11 Correct answer(s):
D £0.60 per machine hour
Department 1 appears to undertake primarily machine-based work, therefore a machine-hour rate
would be most appropriate.
£27,000/45,000 = £0.60 per machine hour
A rate of 40% of direct material cost is not the most appropriate because it is not time-based, and
most items of overhead expenditure tend to increase with time.
The two rates based on direct labour are not the most appropriate because labour activity is
relatively insignificant in department 1, compared with machine activity.
Correct answer(s):
G £0.72 per direct labour hour
Department 2 appears to be labour-intensive, therefore a direct labour-hour rate would be most
appropriate.
£18,000/25,000 = £0.72 per direct labour hour
The rate of 18% of direct labour cost is based on labour therefore it could be suitable. However,
differential wage rates exist and this could lead to inequitable overhead absorption. The machine
hour rate is not suitable because machine activity is not significant in department 2.
12 Correct answer(s):
D £20.91
Overhead absorption rate = £460,000/22,000 = £20.91 per hour
Remember overhead absorption rates are based on budgeted information.
13 Correct answer(s):
14 Correct answer(s):
C £102.90
£
Direct labour £5.25 × 4 hours 21.00
Direct expenses 53.50
Total direct cost 74.50
Overhead absorbed
£7.10 × 4 hours 28.40
Total production cost 102.90
The answer of £81.90 does not include a direct labour cost. The direct cost is not affected by the
basis chosen for the absorption of overheads.
If you selected £91.10 you based the overhead absorption on the rate per welding machine hour,
rather than using the direct labour hour basis as requested.
The answer of £119.50 includes too much overhead cost. It uses both bases of absorption together,
but only one basis of overhead absorption can be used.
15 Correct answer(s):
B £4,462.50
The option of £1,837.50 apportions all of the costs on the basis of area. More appropriate
apportionment bases are available for some of the costs.
Similarly, the option of £6,000 apportions all of the costs on the basis of the number of employees,
and suffers from the same inadequacy.
If you selected £7,000 you simply apportioned the overhead costs evenly between the departments.
More appropriate apportionment bases are available.
16 Correct answer(s):
D £14.60
Budgeted production
overheads £96,000 £82,000
Production overhead
absorption rate £10 per hour £13.20 per hour
£ per unit
Primary cost centre (£10 × 48/60) 8.00
Finishing cost centre (£13.20 × 30/60) 6.60
Total budgeted production overhead cost 14.60
If you selected £10.00 or £13.20 you calculated the correct absorption rate but you should have then
applied it to the labour hours worked on product K.
If you selected £14.00 you calculated an absorption rate based on the 13,500 total budgeted
production units. This rate takes no account of the different amounts of time taken to produce one
unit of each product, and hence of the different resources consumed by each.
17 Correct answer(s):
A (1) and (2) only
Statement (1) is correct because a constant unit absorption rate is used throughout the period.
Statement (2) is correct because ‘actual’ overhead costs, based on actual overhead expenditure and
actual activity for the period, cannot be determined until after the end of the period. Statement (3) is
incorrect because under/over absorption of overheads is caused by the use of predetermined
overhead absorption rates.
18 Correct answer(s):
D Fixed overheads were under absorbed by £3,000, this being partly the difference between
budgeted and actual expenditure and partly the production shortfall of 1,000 units.
Overhead absorption rate = £150,000/30,000 = £5 per unit
£
Absorbed overhead (29,000 units × £5) 145,000
Actual overheads 148,000
Under-absorbed overhead 3,000
The effect of the production shortfall was partly offset by the difference between budgeted and
actual expenditure.
19 Correct answer(s):
D Budgeted capacity 11,250 hours, absorption rate per hour of £9.20
Department Z £
Actual overhead expenditure (same as budget, £61,500 + £42,000) 103,500
Under-absorbed overhead (11,500)
Overhead actually absorbed into production costs 92,000
Actual machine hours 10,000 hrs
Absorption rate per hour £9.20
20 Correct answer(s):
C £2,250.00
When expenditures are as budgeted, but actual and budgeted production activity levels are
different, only fixed overhead can be under or over absorbed.
Over-absorbed overhead = 500 hrs × £4.50 = £2,250
Variable overhead absorbed = (500 × £3.00) = £1,500 more than budgeted in the original budget.
However, variable overhead incurred would be £1,500 more as well, leaving neither under nor over
absorbed variable overheads.
21 Correct answer(s):
C under-absorbed by £205
The overhead is under absorbed because the actual overhead expenditure exceeded the amount
absorbed.
If you calculated the under or over absorption as £140 you simply determined the difference
between the budgeted and actual overheads. However, the amount of overhead absorbed will
depend on the actual level of activity achieved.
22 Correct answer(s):
D £28.75 per hour
£
Actual overheads incurred 480,000
Over absorbed overheads 95,000
Overheads absorbed 575,000
23 Correct answer(s):
C The company produced fewer units than expected.
£
Overhead absorbed = 4,600 units × £2 9,200
Overhead incurred 9,500
Under absorption 300
The company sold fewer units than it produced is incorrect. It is the levels of production which bring
about under/over absorption.
The company sold fewer units than it produced and spent less than expected on fixed overheads is
incorrect. The company has under absorbed production overheads because of lower production
levels than expected.
Spending less than expected on fixed overheads would, in isolation, lead to over absorption rather
than to the under absorption that occurred.
The company produced fewer units than expected and spent less on fixed overheads is incorrect.
The company has under absorbed overheads because of lower production levels than expected.
24 Correct answer(s):
A 20,000
If the absorbed overheads = £357,850 then the budgeted overhead absorption rate = Absorbed
overheads/actual labour hours = £357,850/21,050 = £17 per labour hour.
If budgeted overheads for the period were £340,000 and the budgeted overhead absorption rate is
£17 per labour hour, then the budgeted labour hours = budgeted overheads/overhead absorption
rate = £340,000/£17 = 20,000 hours.
If you selected 20,225 hours you calculated the correct absorption rate but then you divided this into
the actual overhead cost. You should have divided it into the budgeted overhead cost.
If you selected 21,700 hours you subtracted the over absorption to derive the absorbed overheads.
However, if overheads are over absorbed then the amount of overhead absorbed must be greater
than the actual overhead incurred.
25 Correct answer(s):
A £4,000 under-absorbed
When expenditures are as budgeted, but actual and budgeted production activity levels are
different, only fixed overhead can be under or over absorbed.
Under-absorbed overhead = 1,000 hours × £4 = £4,000.
26 Correct answer(s):
C £3,400 under-absorbed
Overhead absorption rate = £54,500/((1,700 × 2) + (2,500 × 3))
= £5 per machine hour
Overhead absorbed by actual production achieved:
£
Product A 1,900 units produced × £5 × 2 hours 19,000
Product B 2,200 units produced × £5 × 3 hours 33,000
52,000
Actual overhead incurred 55,400
Under absorbed overhead 3,400
If you calculated the under or over absorption as £900 you calculated the difference between the
budgeted and actual overheads without taking account of overhead absorbed by the units
produced.
27 Correct answer(s):
C A factor which causes the costs of an activity
The cost driver is the factor which causes the costs of an activity to increase or decrease. For
example, a cost driver for materials handling costs could be the number of production runs: the
higher the number of production runs, the higher will be the cost of material handling.
‘A mechanism for accumulating the costs of an activity’ is a description of a cost pool.
‘An overhead costs that is caused as a direct consequence of an activity’ is a description of an
overhead cost that is attributable to a particular activity.
‘A cost relating to more than one product or service’ describes a common cost that must be
apportioned.
28 Correct answer(s):
D Activity based costing (ABC) involves tracing resource consumption and costing final outputs.
E Just-in-time (JIT) systems are referred to as ‘pull’ systems because demand from a customer pulls
products through the production process
JIT purchasing requires that materials are delivered by the supplier, in small quantities not large
quantities, just as they are needed in the production process.
ABC is concerned with all types of overhead cost, including the cost of non factory-floor activities
such as quality control and customer service. It therefore takes cost accounting beyond its traditional
factory floor boundaries.
ABC does not eliminate the need for arbitrary cost apportionment. Some apportionment may still be
required at the pooling stage for items such as rent and rates.
29 Correct answer(s):
B (1), (2), (3) and (4)
30 Correct answer(s):
C Lower levels of receivables
A lower level of receivables is not the result of the adoption of a JIT system and is more to do with
credit control procedures.
31 Correct answer(s):
A Process
Brewing involves a continuous flow of processes.
Correct answer(s):
F Contract
Each motorway would be a separately identifiable cost unit of relatively long duration. Therefore,
contract costing is appropriate.
Correct answer(s):
H Job
Each plumbing repair would be a separately identifiable cost unit of relatively short duration.
Therefore, job costing is most appropriate.
Correct answer(s):
L Batch
In shoe manufacturing a number of identical shoes would be manufactured in separately identifiable
batches.
32 Correct answer(s):
A In process and batch costing the cost per unit of output is found indirectly by dividing total costs
by the number of units produced.
D The procedures used to calculate unit costs in manufacturing industries can equally be applied
to service industries.
It is incorrect to state that in process and job costing the cost per unit of output is found directly by
accumulating costs for each unit. This applies only to job costing since it is not possible to identify
individual units in a process costing environment.
It is incorrect to state that costing is irrelevant. Both financial accounts and cost accounts use the
same basic data. However, the cost accounting analyses the data in a more detailed way and in a
manner that is useful for management planning, decision-making and control.
33 Correct answer(s):
A Actual material cost
C Absorbed manufacturing overheads
The actual material cost for a batch can be determined from the material recording system.
Actual manufacturing overheads cannot be determined for a specific batch because of the need for
allocation and apportionment of each item of overhead expenditure, and the subsequent calculation
of a predetermined overhead absorption rate. Therefore, actual manufacturing overheads is
incorrect and absorbed manufacturing overheads is correct.
34 Correct answer(s):
D The construction industry
The construction industry would be more likely to use contract costing, not process costing.
The brewing industry, the oil industry and the steel industry would all use process costing.
35 Correct answer(s):
B (1) and (3) only
Statement (2) is not correct. Contract costing often applies to projects which are based on sites away
from the contractor’s premises.
36 Correct answer(s):
C £217,323
£58,575 is the direct cost of job A, with no addition for overhead. £101,675 is the direct cost of both
jobs in progress, but with no addition for overhead.
£227,675 is the result of charging all of the overhead to the jobs in progress, but some of the
overhead must be absorbed by the completed job B.
SAMPLE EXAM
37 Correct answer(s):
A Process
Oil refining involves a continuous manufacturing process of homogeneous output and therefore is
ideally suited to process costing.
Correct answer(s):
F Batch
Clothing would be manufactured using batches of material, for example of a certain texture or
colour. Production would be halted before the next batch of items of a particular style is produced.
The most appropriate costing method would therefore be batch costing.
Correct answer(s):
H Job/contract
Car repair work would be very varied and each repair would be bespoke. Therefore, neither process
nor batch costing would be appropriate but job/contract costing would be a suitable costing
method.
SAMPLE EXAM
£ per unit
Variable materials 9.80
Variable labour 8.70
Variable production overheads 1.35
Variable production cost per unit 19.85
If you selected £117,562 you included the variable selling and distribution overheads in the
inventory valuation. The inventory should be valued at variable production cost.
The value of £125,603 includes fixed production overheads. In a marginal costing system these
overheads would be charged against the revenue as a period cost and would not be included in the
inventory valuation.
If you selected £172,430 you valued the inventory units at total cost. Selling and distribution
overheads should not be included in inventory valuation and fixed production overheads should not
be included in a marginal costing inventory valuation.
2 Correct answer(s):
A £52,000
The value of this inventory using marginal costing would have been £52,000.
You should have been able to eliminate the options of £260,000 and £442,000 since the inventory
valuation using marginal costing will always be lower than with absorption costing.
If you selected £53,150 you re-calculated the fixed overhead absorption rate on a per unit basis
rather than using a rate per labour hour.
3 Correct answer(s):
B Contribution: £20,000, Profit: £15,000
The contribution figures of £25,000 relate to a sales volume of 1,000 clocks but this was the
production volume.
The profit figure of £16,000 is the absorption costing profit for September.
4 Correct answer(s):
A Marginal costing is an alternative method of costing to absorption costing.
D Fixed costs are treated as a period cost and are charged in full to the income statement of the
accounting period in which they are incurred.
E Marginal cost is the cost of a unit which would not be incurred if that unit were not produced.
Contribution is calculated as sales revenue minus all variable costs (and not fixed cost of sales).
Closing inventories are valued at marginal production cost (and not full production cost).
5 Correct answer(s):
A Such systems value finished goods at the variable cost of production.
D Such systems write off fixed overheads to the income statement in the period in which they were
incurred.
Under- or over-absorbed overheads cannot arise with marginal costing because fixed overhead is
written off in full as it is incurred.
6 Correct answer(s):
D £113,250
£
Gross profit (16,000 units × £(24.00 – 8.50 – 2.50)) 208,000
Selling costs (16,000 units × £6) (96,000)
112,000
Over absorbed fixed production costs
(16,400 units produced – 15,900 budgeted) × £2.50 1,250
Absorption costing profit 113,250
If you answered £110,750 you deducted the over absorption instead of adding it to the calculated
profit. The option of £112,000 makes no allowance for the over absorption and £112,250 is the
marginal costing profit for the quarter.
7 Correct answer(s):
D Profits measured using absorption costing may be the same as, or lower than, or higher than
profits measured using marginal costing.
Whether profits under absorption costing are the same as, lower than or higher than profits under
marginal costing depends entirely on opening and closing inventory figures. For example, if there is
no opening or closing inventory, then the two measures of profit will be the same.
8 Correct answer(s):
A less operating profit than the absorption costing method
9 Correct answer(s):
B £5,160 higher
Since production exceeded sales the inventory of 200 units carried forward to the next period would
include fixed production costs of (200 × (£25,800/1,000)) = £5,160 with absorption costing.
Under marginal costing these fixed costs would be charged against the revenue for the period. Thus
the absorption costing profit would be £5,160 higher.
If you selected £24,260 higher or lower you calculated the profit difference as the total production
cost of the 200 units in inventory. However, the difference in inventory valuation is caused by the
differing treatment of the fixed costs only.
10 Correct answer(s):
B £10,000 lower
The marginal costing profit is lower because with absorption costing some of the fixed production
costs would be carried forward in the inventory valuation.
If you calculated the profit difference as £22,500 you included the fixed selling costs. However,
selling costs are not included in the inventory valuation, which should include production costs only.
11 Correct answer(s):
B £57,500
Sales volume exceeded production volume by 500 units, therefore inventories reduced. The
absorption costing profit will be lower than the marginal costing profit because fixed overheads were
‘released’ from inventory.
If you selected £47,500 you based your calculation of the profit difference on the closing inventory of
2,500 units. The answer of £59,500 is calculated as £7 profit per unit × 8,500 units sold, however, this
takes no account of the actual level of fixed overhead cost.
If you selected £62,500 you calculated the correct profit difference, but you added it to the marginal
costing profit instead of subtracting it.
12 Correct answer(s):
D £2,400 loss
13 Correct answer(s):
D £9.00
If you selected one of the other options, you attempted various divisions of all the data available in
the question.
14 Correct answer(s):
B £75,800
Inventories decreased, therefore the absorption costing profit would be lower as overheads are
‘released’ from inventory.
If you selected options A or C you based your calculation of the profit difference on only the opening
inventory or closing inventory respectively.
If you selected option D you calculated the correct profit difference, but you added it, instead of
subtracting it from the marginal costing profit.
15 Correct answer(s):
D absorption costing profits will be higher and closing inventory valuations higher than those
under marginal costing
Closing inventory valuations are always higher with absorption costing because of the inclusions of
fixed overhead. Therefore, the statements that closing inventory valuations are lower are incorrect.
If inventories increase, absorption costing profits are higher because of the fixed overhead being
carried forward in inventory.
16 Correct answer(s):
C It is more appropriate for short-term decision-making
D Fixed costs are treated in accordance with their nature (ie, as period costs)
17 Correct answer(s):
A absorption costing profits will be lower and closing inventory valuations higher than those under
marginal costing
Closing inventory valuations are always higher with absorption costing because of the inclusions of
fixed overhead. Therefore, the statements that closing inventory valuations are lower are incorrect.
If inventories decrease, absorption costing profits are lower because of the fixed overhead being
released from inventory.
18 Correct answer(s):
C When closing inventory levels are higher than opening inventory levels and overheads are
constant, absorption costing gives a higher profit than marginal costing.
D In a multi-product company, smaller volume products may cause a disproportionate amount of
set up overhead cost.
The statement ‘Absorption unit cost information is the most reliable as a basis for pricing decisions’ is
not true because short term changes in activity levels can result in unit costs being artificially high or
low, because overheads will be absorbed over the unrepresentative number of units. This could
make prices set using this cost basis artificially high or low.
The statement ‘A product showing a loss under absorption costing will also make a negative
contribution under marginal costing’ is not true because a product could earn a contribution under
marginal costing which then becomes a gross loss under absorption costing only because of the
increase in cost from absorbing overheads.
The statement ‘Marginal unit cost information is normally the most useful for external reporting
purposes’ is not true because external reporting will need to take account of unit costs right across
an operation not just unit costs when incremental (marginal) changes in activity levels are made.
The statement ‘When closing inventory levels are higher than opening inventory levels and
overheads are constant, absorption costing gives a higher profit than marginal costing’ is true
because an increase in inventory levels will mean that with absorption costing more overhead is
being carried forward at the end of the period than at the start of the period. This means that
overheads charged against profit in the period would be lower than under marginal costing thereby
increasing the reported profit.
The statement ‘In a multi-product company, smaller volume products may cause a disproportionate
amount of set up overhead cost’ is true because overheads would normally be apportioned based
on the time a product spends on the production line. For smaller volume products the time taken to
set up the product run becomes a larger proportion of the total time spent in production than for
higher volume products.
SAMPLE EXAM
19 Correct answer(s):
A £18
Number of hours in Machining are:
Hours
Pye 4,000 × 0.5 = 2,000
Tan 4,000 × 1.0 =
Total Machining overhead is £120,000 or £120,000/6,000 per hour = £20 per hour
Machining overhead cost of a unit of Pye is £20 × 0.5 = £10
Number of hours in Assembly are:
Hours
Pye 4,000 × 0.20 = 800
Tan 4,000 × 0.25 = 1,000
1,800
Total Assembly overhead is £72,000 or £72,000/1,800 per hour = £40 per hour
Assembly overhead cost of a unit of Pye is £40 × 0.2 = £8
Total overhead cost of a unit of Pye is therefore £10 (Machining) + £8 (Assembly) = £18
If you calculated £20 you incorrectly either just used the total Machining overhead per hour or
added together the Machining overhead cost of a Pye and the Assembly overhead cost of a Tan.
If you calculated £28 you incorrectly added together the Machining overhead cost of a Tan and the
Assembly overhead cost of a Pye.
£24 was just an incorrect answer.
20 Correct answer(s):
B £19,500
The manufacturing cost per unit, on an absorption costing basis, is:
£6.00 + (£90,000/75,000) =
£6.00 + £1.20 = £7.20
The cost of sales is therefore 70,000 × £7.20 = £504,000
The sales revenue is 70,000 × £8 = £560,000
The profit before selling and administration costs is therefore £560,000 – £504,000 = £56,000
The selling and administration costs are (70,000 × £0.20) + £22,500 = £36,500
The net profit is therefore £56,000 – £36,500 = £19,500
If you calculated the profit as £13,500 then you calculated the net profit using marginal costing. Total
variable costs on this basis would be 70,000 × £6.20 = £434,000 and total overheads £90,000 +
£22,500 = £112,500. The net profit would therefore (incorrectly) be calculated as £560,000 –
£434,000 – £112,500 = £13,500
If you calculated the net profit as £21,000 or £22,500 then you probably followed the right method
but made an arithmetical error.
SAMPLE EXAM
If you selected £271.45 you did not add the general overhead to determine the total cost per unit.
If you selected £282.31 you simply added 30% (20% + 10%) to the total production cost in order to
determine the selling price. The two percentages should be added separately and the 20% margin
should be determined as a percentage of the selling price, not as a percentage of cost.
The option of £286.66 is the price derived using a 20% mark up on a cost, rather than a 20% margin
on the selling price.
2 Correct answer(s):
B £51.84
Production overhead absorption rate per direct labour hour is:
£61,200/(4,000 × 2 hours + 6,000 × 1.5 hours) = £3.60
Product L
£ per unit
Materials 6.00
Labour 30.00
Production overhead (2 hours × £3.60) 7.20
Total production cost 43.20
Profit mark up (20% × £43.20) 8.64
Selling price 51.84
If you selected £47.52, you calculated the correct production overhead absorption rate per hour, but
you forgot to multiply this by 2 to derive the overhead to be absorbed by product L.
If you selected £54.00, you added a margin of 20% based on the selling price, rather than a mark up
of 20% based on the cost.
If you selected £61.56 you calculated the production overhead absorption rate based only on the
output of product L. However, some of the production overhead will be absorbed by product T.
£
Variable materials (£30 × 3) 90.00
Variable wages (£10 × 3) 30.00
Machine set up 3.00
Design and artwork 15.00
Production overhead (£30 × 20%) 6.00
Total production cost 144.00
Selling, distribution and administration overhead (£144 × 5%) 7.20
Total cost 151.20
Profit margin (£151.20 × 25/75) 50.40
Selling price for a batch of 300 201.60
If you selected £189.00 you calculated the cost correctly, but added a profit mark up of 25% of cost,
instead of a margin of 25% of selling price.
If you selected £193.20 you failed to absorb the appropriate amount of fixed overhead. If you
selected £252.00 you treated all of the costs as variable costs, even though the machine set up and
design costs are fixed regardless of batch size.
4 Correct answer(s):
C £84,963
£
Opening work in progress 42,790
Labour for period 3,500
Overheads (£3,500/£42,600) × £126,000 10,352
Total cost 56,642
Profit (331/3% on sales) 28,321
84,963
5 Correct answer(s):
B £60.96
Selling price = £90.68
= 119% of pre-tax price
6 Correct answer(s):
C 3.0% decrease
Selling price at end of Year 2 = £27.50 × 1.05 × 1.06
= £30.61
Change in selling price in Year 3 is therefore £(30.61 – 29.69) = £0.92 (reduction)
Percentage change in Year 3 was therefore (–0.92/30.61) × 100% = –3%
If you selected a 2.7% decrease, you calculated the price at the end of Year 2 as being 11% of the
initial price. You should have compounded the two increases at 6% and 5%, rather than simply
adding them together.
If you calculated the year three price change to be a 3.4% decrease, you calculated the correct
absolute value of the price change. However, you then expressed this as a percentage of the original
price, rather than as a percentage of the price at the beginning of Year 3.
7 Correct answer(s):
C £88.13
Let x = price of article before sales tax
Then, 1.12 x = £84
Therefore: x = £84/1.12
= £75
New selling price = 1.175 × £75
= £88.13
If you selected £75, you calculated the correct pre-tax price but then forgot to add the revised sales
tax.
If you selected a price of £86.86 you calculated the sales tax as 12% of the current selling price, but
this price includes the tax which is based on the pre-tax price.
If you calculated a price of £88.62, you simply added an extra 5.5% tax to the current selling price.
However, the total sales tax is based on the pre-tax price. Therefore, the current level of tax must first
be deducted to derive the basis on which to calculate the new 17.5% tax.
8 Correct answer(s):
C 20%
25 kg costs £9.00
∴ 1 kg costs = £9.00/25
= £0.36
∴ Percentage saving = (0.45 – 0.36)/0.45 × 100%
= 20%
9 Correct answer(s):
B £16.67
Cost = 75% of selling price
And cost = £50
Therefore, selling price = £50/75 × 100
= £66.67
Profit = (£66.67 – £50.00)
= £16.67
If you selected £12.50, you calculated the profit as 25% of the cost rather than 25% of the selling
price.
If you selected £62.50, you calculated a profit mark up of 25% of the cost and then added the profit
to the cost to derive the (incorrect) selling price.
The option of £66.67 is the correct selling price but this was not the requirement of the question.
10 Correct answer(s):
A £40
Cost + mark up = sales price
Assume cost = £100, then mark up is £20 and sales price = £120 (100 + 20 = 120)
Actual selling price = £240
The profit (mark up) is therefore £240/120 × 20 = £40
If you selected £48, you calculated the profit margin of 20% of the selling price. The mark-up is
expressed as a percentage of cost.
11 Correct answer(s):
B £606
£
Selling price of job 1,690
Less profit mark up (30/130) 390
Total cost of job 1,300
Less overhead 694
Prime cost 606
If you selected £489, you deducted 30% from the selling price to derive the total cost of the job.
£996 is the result of deducting the overhead from the selling price, but omitting to deduct the profit
margin.
£1,300 is the total cost of the job; you needed to deduct the overhead to derive the prime cost.
12 Correct answer(s):
D 68.2%
13 Correct answer(s):
A 16.7%
Cost of goods sold = purchases + opening inventory – closing inventory
= £40,000 + £12,000 – £2,000
= £50,000
Profit for period = £60,000 – £50,000
= £10,000
Percentage margin = (£10,000/£60,000) × 100%
= 16.7%
If you selected 20.0%, you calculated the percentage mark up on cost rather than the percentage
margin on the selling price.
If you selected 33.3% or 50.0%, you calculated the margin and the mark up respectively, using the
purchases figure as the cost of goods sold, without adjusting for the change in inventory.
14 Correct answer(s):
D 233%
%
Marginal cost 60
Fixed cost 100
Full/total cost 160
Margin (160 × 20/80) 40
Selling price 200
15 Correct answer(s):
C The total revenue will decrease and the total contribution will increase.
Let the current selling price be £P and the current sales volume be V units.
16 Correct answer(s):
C £12.50
Profit = contribution – fixed costs
Therefore contribution = £10,000 + £160,000 = £170,000
If a 2% increase in selling price is £5,000 then the sales revenue before the increase was: £5,000/0.02
= £250,000
The variable costs are sales revenue less contribution, ie, £250,000 – £170,000
= £80,000
Number of units sold = £80,000/(variable cost per unit = £4)
= 20,000
Current selling price per unit is therefore:
£250,000/20,000 = £12.50
If you selected £0.08, you made a mistake at the last step and performed the final division ‘upside
down’.
If you selected £10.00, you deducted the profit from the fixed costs to determine the contribution,
instead of adding it.
The option of £12.75 is the revised selling price, including the 2% increase.
17 Correct answer(s):
A The supplier and the buyer will each bear some of the inflation risk but not necessarily equally.
The supplier will bear the inflation risk during the credit period, since the price is fixed during that
time.
The buyer will bear the inflation risk during the time that the contract is being completed, since the
actual costs incurred are to be passed to the buyer.
Despite the fact that both intervals are four weeks the buyer and seller do not bear the inflation risk
equally because the risk applies to two different time periods.
18 Correct answer(s):
C The percentage mark up with full cost plus pricing will always be smaller than the percentage
mark up with marginal cost-plus pricing.
The percentage mark up with marginal cost-plus pricing must be large enough to cover the fixed
costs as well as to earn the required profit.
19 Correct answer(s):
B £30,000 decrease
The company will be buying 5,000 units at £18 each from the external supplier, rather than making
the units for £12 each in division X. Profit will therefore fall by 5,000 × £(18 – 12) = £30,000.
If you calculated a change in profit of £10,000 you calculated the difference of £2 between the
transfer price of £20 and the external price of £18 and interpreted this as a saving for the company
as a whole. However, the transfer price of £20 is not an actual cost to the company. It is an external
charge made for goods or services supplied between divisions.
20 Correct answer(s):
B Should encourage output at an organisation-wide profit-maximising level
E Should enable the realistic measurement of divisional profit
An effective transfer pricing system should discourage dysfunctional decision-making and should not
encourage divisions to act in their own self-interest. Instead it should encourage goal congruence
where divisions do not make entirely autonomous decisions and there is an alignment between
divisional goals and corporate goals.
By providing the supplying division with a realistic profit and the receiving division with a realistic
cost, it is possible to measure the divisional profit and to encourage output at an organisation-wide
profit-maximising level.
21 Correct answer(s):
C The receiving division is charged with the standard variable cost of transfers made and the
supplying division is credited with the market value.
The use of standard cost ensures that efficiencies and inefficiencies are not transferred to the
receiving division. The use of variable cost avoids the situation where the receiving division perceives
the supplying division’s fixed costs to be variable costs of the organisation as a whole. This could
lead to sub-optimal decisions.
Crediting the supplying division with the market value reduces the likelihood of sub-optimal
decision-making and improves goal congruence.
22 Correct answer(s):
C (1): £21.00; (2): £9
£
Direct material cost per unit 3.00
Direct labour cost per unit 4.00
Variable overhead cost per unit 2.00
9.00
If you calculated a full production cost-plus transfer price of £12.60, you did not include any
absorbed fixed production overhead.
If you selected a two-part tariff price of £19, you added £10 per unit for fixed overhead, based on the
fixed fee of £200,000 divided by the expected number of 20,000 units to be transferred.
However, the fixed fee is not unitised in a two-part tariff system. The charge of £200,000 is made
regardless of the number of units actually transferred.
23 Correct answer(s):
A The offer is not acceptable from the point of view of company C and the manager of Division B
will make a sub-optimal decision.
The manager of division B accepts the offer, the company as a whole pays £330 per unit but saves
only £300 per unit, which are the variable costs of division A. Thus, overall, the company’s costs
increase by £30 per unit and the offer is not acceptable.
Division B will pay £330 per unit but saves £410 per unit and so will decide to accept the offer. Thus,
the manager of Division B will make a sub-optimal decision from the point of view of the company as
a whole.
24 Correct answer(s):
B £55.50
The total demand for product K exceeds the capacity of division J therefore internal transfers will
displace external sales.
Optimum transfer price = external market price – cost savings with internal transfer.
Cost savings with internal transfer = 5% × total variable cost
= 5% × (100/190 × £57)
= £1.50
Optimum transfer price per unit = £57 – £1.50
= £55.50
If you selected £54.50 per unit, you calculated the cost savings on internal transfers as 5% of the total
cost of £50, rather than as 5% of the total variable cost.
If you selected £56.72 per unit, you calculated the variable costs as 10% of the selling price of £57.
This misinterprets the meaning of the 90% mark up on marginal cost.
If you selected £57.00 per unit, you simply opted for a transfer price equal to the external market
price. However, this makes no allowance for the cost savings which arise on internal transfers.
25 Correct answer(s):
C Only the buyer will bear the inflation risk
Because the selling price is agreed to be the actual costs incurred by the supplier plus a profit mark-
up using a fixed percentage, then any inflation adjustment to costs would also affect the selling price.
The supplier can pass on all inflation increases to the buyer and will also earn a mark-up on the cost
increase.
In this case:
26 Correct answer(s):
B £56
Because the demand for Rex is more than sufficient for division F to manufacture to capacity, the
price that the product should be transferred to division G should represent the same profit margin as
if the product were sold externally. The external selling price is £64 but if an external sale is made
then additional selling overhead of £8 would be incurred. The net transfer price is therefore £56.
The £64 price doesn’t reflect the saving in selling costs. £40 and £48 give lower profit margins for the
producing division F, hence they would want to sell outside.
SAMPLE EXAM
27 Correct answer(s):
B 110%
If it is assumed that the direct cost of the product is £100, then the indirect costs would be £40 and
the total cost £140. The selling price is set to recover the full cost (£140) plus 50%, ie, plus £70. This
makes the selling price £210 (£140 + £70).
The mark-up on direct costs is therefore £210 (selling price) less £100 (direct cost) = £110.
The percentage mark-up is therefore £110/£100 = 110%.
If you calculated the mark-up as 210% you probably calculated the selling price (£210) as a
percentage of the direct cost in error.
If you calculated the mark-up as 190% or 110% you probably made calculation errors.
28 Correct answer(s):
C £82,500
The total sales will use 25,000 tonnes of material, at a cost of: (18,000 × £10) + (7,000 × £10 × 95%)
= (£180,000) + (£70,000 × 95%)
= £246,500
The variable labour and overhead cost for this level of production would increase to:
(£96,000 + £48,000) × 125% = £144,000 × 125% = £180,000
The fixed costs remain at £72,000.
Total costs are therefore (£246,500 + £180,000 + £72,000) = £498,500.
The requirement is to earn the same budget profit of £64,000. This means the total required sales
income will be (£498,500 + £64,000) = £562,500.
The sales revenue without the extra order is £480,000 and therefore the revenue to be generated
from the extra order is (£562,500 – £480,000) = £82,500.
If you calculated the answer as £100,500, then you probably incorrectly increased the fixed costs by
25% as well, from £72,000 to £90,000, meaning an extra £18,000 would need to be recovered
through the selling price.
If you calculated the answer as either £83,500 or £101,500, then you either followed the correct logic
or the incorrect logic set out above, and also made an arithmetical error.
SAMPLE EXAM
30 Correct answer(s):
A £531
Contribution is defined as sales revenue less variable costs. The current contribution ratio is therefore
(600,000 – 216,000 – 132,000)/600,000 = 42%.
The variable manufacturing cost is expected to increase by 10% to £237,600 and therefore total
variable costs will be (£237,600 + £132,000) = £369,600. If the contribution ratio is maintained at
42% then these costs would represent 58% of sales revenue. Sales revenue is therefore
£369,600/0.58 = £637,241.
As the sales volume remains at 1,200 units the unit selling price must be £637,241/1,200 = £531.
If you incorrectly calculated the selling price as £550 then you either calculated the contribution as
sales revenue less manufacturing variable costs only (64%) and incorrectly ignored variable selling
costs or alternatively increased both manufacturing and selling variable costs by 10%.
If you incorrectly calculated the selling price as £518 then you probably calculated the current
contribution correctly but then inflated the selling variable costs by 10% rather than the
manufacturing variable overheads.
31 Correct answer(s):
D Division Delta profit: Decrease; Overall company profit: Decrease
Delta loses a contribution of £(76 – 140) = £36/unit so its profits fall. The company is paying £152 for
a unit which costs £140 to make internally (fixed costs are fixed) so its profits fall.
Gamma’s profit would increase (paying £152 not £176). If you selected an increase in the company’s
profits then you forgot that fixed costs are fixed and the relevant cost per unit in Delta is £140 not
£160.
32 Correct answer(s):
C Division Delta profit: No change; Overall company profit: Increase
For every Y not sold internally, Delta would sell an equally profitable X externally, so there would be
no change in its profits. For the company, it gains £(176 – 140) = £36/unit on an X and pays £(152 –
140) = £12/unit more on a Y so gains overall (fixed costs are fixed).
Gamma’s profits would increase as it pays less per unit for Y. If you thought the company profits
would fall then you probably allowed for the extra cost of a Y but not the gain from an X.
2 Correct answer(s):
C To inform shareholders of performance in meeting targets
Budgets are prepared for internal use and are not usually communicated to shareholders.
3 Correct answer(s):
B The budget committee coordinates the preparation and administration of budgets.
D A budget manual will contain instructions governing the preparation of budgets.
A budget is set within the framework of the long term or strategic plan but is not itself used for
strategic planning. It acts as one step towards the achievement of the long term or strategic plan.
The budget committee is responsible for coordinating the preparation and administration of
budgets but not for actually preparing the individual functional budgets.
Shareholders (unless also managers) would not usually be involved in budget preparation.
4 Correct answer(s):
B Establish the organisation’s long-term objectives
Since each budget is set within the framework of the long-term plan, the long-term plan must be
established before any of the other budget tasks can be undertaken. The (usually annual) budget
acts as the first step towards the achievement of the organisation’s long-term plans.
Calculation of the overhead absorption rate is unlikely to be the first task undertaken. It will depend
on other budgets being prepared first, for example the production budget and the production
overheads budget.
The principal budget factor is important because it is the limiting factor which must be identified
before the other budgets can be prepared. The limiting factor may be affected by the organisation’s
long-term objectives, however, and so its identification is not the first task to be undertaken.
The sales budget may be the first budget to be prepared, if sales are the principal budget factor. The
establishment of the long-term plans and identification of the principal budget factor must come
first, however.
6 Correct answer(s):
B A factor which limits the activities of an undertaking
The factor which limits the activities of an undertaking will drive the budget and is called the
principal budget factor.
The highest value item of cost will not drive the budget unless they are limited in some way.
Both a factor common to all budget centres and a factor controllable by the manager of the budget
centre are incorrect. These factors will not drive the budget unless it is limited in some way.
7 Correct answer(s):
B (1), (2), (3) and (4)
Sales demand is usually the principal budget factor. However, the identification of a principal budget
factor depends on what factor limits the organisation’s activities and so is the limiting factor.
All of the factors listed could therefore be the principal budget factor in certain circumstances.
8 Correct answer(s):
B Cash budget
The cash budget is not a functional budget but part of the overall master budget.
9 Correct answer(s):
B Sales budget, finished goods inventory budget, production budget, then materials usage
budget
Sales would be the principal budget factor (as there are no production resource limitations) and so
this is the first budget to be prepared.
Inventory adjustments in the finished goods inventory budget indicate the production requirements
for the production budget. Once the level of production is known, the materials usage budget can
be prepared.
10 Correct answer(s):
A will include a budgeted balance sheet and a budgeted income statement prepared on the
accruals basis
B will include a cash budget
The master budget consists of a budgeted balance sheet, a budgeted income statement and a cash
budget. It is prepared from the information in the functional budgets, and is therefore the last to be
prepared.
Instructions for the preparation of the budgets will be contained in the budget manual.
A budget timetable is drawn up at the start of the budgetary process, and is not included in the
master budget.
12 Correct answer(s):
B 1,488
Units
Budgeted sales 1,500
Less inventory reduction (120 × 10%) (12)
Budgeted production 1,488
If you selected 1,392 units you deducted the budgeted opening inventory from the budgeted sales
volume and then added the budgeted reduction in inventory. This is double-counting.
The option of 1,500 units is the budgeted sales volume. This would only be the correct answer if
there was no budgeted change in inventory. Because a reduction in inventory is budgeted it is
possible to produce fewer units in order to satisfy the sales demand.
If you selected 1,512 units you added the inventory reduction instead of deducting it. As mentioned
earlier, a budgeted reduction in inventory means that it is possible to produce fewer units in order to
satisfy the sales demand.
13 Correct answer(s):
D 43,300 litres
14 Correct answer(s):
B Materials required for production – opening inventory of materials + closing inventory of
materials
It may help if you think in terms of the inputs to a material purchases budget (opening inventory plus
purchases) and the outputs (closing inventory and the quantity used in production). Inputs should
15 Correct answer(s):
C £93,100
Material Z Material Y
kg kg
Vip 2,000 × 2 kg of Z 4,000
Vip 2,000 × 1 kg of Y 2,000
Bip 2,000 × 3 kg of Z 6,000
Bip 2,000 × 4 kg of Y 8,000
Total usage 10,000 10,000
Increase in inventory 400 300
Materials purchases budget 10,400 10,300
Cost per kg £4 £5
Cost of material purchases £41,600 £51,500
16 Correct answer(s):
C £19,250
£
Cost of sales for June (£25,000 × 0.75) 18,750
Increase in inventory (£5,000 × 0.10) 500
Budgeted inventory purchases 19,250
If you selected £18,250, you deducted the inventory increase instead of adding it. A budgeted
increase in inventory means that a higher level of purchases are required to satisfy the sales demand
as well as leaving sufficient inventory for the forthcoming period.
If you selected £19,125, you deducted a profit margin from the £5,000 value of the inventory. This is
incorrect because inventory is valued at cost.
If you selected £25,500, you did not deduct the profit margin from the sales revenue figure for June.
This is incorrect because purchases are valued at cost.
17 Correct answer(s):
D 16,000
If you selected 12,960, you deducted a 10% allowance for defective units, instead of adding it.
If you selected 14,400, then this makes no allowance for defective units at all.
If you selected 15,840 then you added 10% to the required completed units to allow for the
defective units, but then 10% should be based on the total number of units output, ie, 10% of 16,000
= 1,600 units.
18 Correct answer(s):
C Raw materials inventories are budgeted to increase.
Once the material usage budget has been prepared, based on the budgeted production volume,
the usage is adjusted for the budgeted change in materials inventories in order to determine the
required budgeted purchases. If purchases exceed production requirements this means that raw
material inventories are being increased.
The first statement is incorrect because wastage would have been allowed for in determining the
material usage budget. A budgeted increase in finished goods inventory would have been allowed
for in determining the production budget and hence the material usage budget.
19 Correct answer(s):
B £3,700
£ £
Sales (3,000 + (2 × 4,500) + (3 × 5,000)) 27,000
Cost of sales (2/3 × £27,000) 18,000
Gross profit 9,000
Running expenses (6 × £800) 4,800
Depreciation (£5,000 × 20% × 6/12) 500
5,300
Net profit 3,700
If you selected £3,200, you charged a full year’s deprecation on the non-current assets, instead of
only six months.
If you selected £3,950, you charged depreciation only from the date that the non-current assets are
paid for. However, depreciation should have been charged for all of the six months that the assets
were in use.
If you selected £8,200, you calculated the gross profit as 50% of the selling price, instead of one
third.
20 Correct answer(s):
B £77,800
Note that an adjustment does not have to be made for the settlement discount in this case as the
question states that 60% of the sales will be settled, rather than that 60% of the gross invoice value
will be received.
21 Correct answer(s):
B £51,592
Payables balance at end of March = February and March purchases
The purchases for each month are equal to the sales requirement for the following month.
If you selected £64,490 you calculated the sales value for March and April, rather than the cost of
sales for which credit is obtained.
22 Correct answer(s):
B £6,975
£ £
Sales revenue £120,000 × 0.98 × 0.95 111,720
Variable materials cost £24,000 × 0.9 × 0.95 20,520
Variable labour cost £32,500 × 0.95 30,875
Variable overhead £13,000 × 0.95 12,350
Fixed overhead 41,000
104,745
Budgeted net profit 6,975
If you selected £3,620, you made the common mistake of failing to reduce all of the variable costs by
5% in line with the reduction in sales volume.
If you selected £9,025, you reduced the budgeted fixed costs by 5%. The fixed costs do not alter
when activity levels change.
If you selected £9,375, you did not take account of the reduction in the selling price.
23 Correct answer(s):
B A budget must be quantified if it is to be useful for planning and control purposes.
E An organisation’s long term plan provides the framework within which an annual budget is set.
If a budget is not quantified then it is merely a general statement of intention rather than a quantified
plan of action that the organisation will aim to achieve.
The long-term plan does provide the framework for the annual budget. Each budget is a step
towards the achievement of the long-term plan.
24 Correct answer(s):
B Total cost = 65,000 + (3 × quantity)
£
Highest production 3,000 units 74,000
Lowest production 1,500 units 69,500
1,500 4,500
SAMPLE EXAM
25 Correct answer(s):
B £18,700
Units £
Highest output 1,090 19,540
Less lowest output 700 17,200
390 2,340
£
Variable cost (950 × £6) 5,700
Fixed cost 13,000
18,700
Be careful when you begin these calculations to ensure that you base them on the highest and
lowest production/output, and not the highest and lowest costs. This could lead to a different answer,
as the highest and lowest outputs do not necessarily correspond to the highest and lowest costs.
The rate of absorption of fixed production overheads will therefore be £150,000/60,000 = £2.50 per
unit.
The fixed production overhead absorbed by the product would be 16,500 units produced × £2.50 =
£41,250.
If you selected £33,750, you based the overhead absorption on the number of units sold, rather than
on the number of units produced.
If you selected £37,500, you calculated the correct value of the fixed production overhead incurred
during the quarter, but this is not the same as the overhead absorbed.
If you selected £66,000, you absorbed the fixed sales, distribution and administration costs in
addition to the fixed production costs.
27 Correct answer(s):
D Total fixed cost: £7,600; Variable cost per unit: £9.90
Department 1
Units £
Total production overhead cost for 1,000 = 1,000 × £6 = 6,000
Total production overhead cost for 2,000 = 2,000 × £4.20 = 8,400
Increase 1,000 2,400
Department 2
Units £
Total production overhead cost for 1,000 = 1,000 × £4 = 4,000
Total production overhead cost for 2,000 = 2,000 × £2 = 4,000
Summary
If you selected £3,600 and £9.90, you omitted the fixed cost for department 2.
The combination of £4,000 and £11.70 treats the unit rate for 2,000 in department 1 as wholly
variable, but it is a semi-variable cost.
If you selected £7,600 and £7.50, you forgot to include the variable cost per unit for department 1.
28 Correct answer(s):
B The value of one variable can be predicted or estimated from the value of one other variable
D What has happened in the past will provide a reliable guide to the future
Regression analysis assumes that a linear relationship exists (not a curvilinear relationship).
Two variables may have a perfect linear relationship (r = +1 or r = –1) but this is not necessary for
forecasting purposes.
29 Correct answer(s):
A Fixed costs are £100. Variable costs per unit are £20.
If C = 100 + 20P, then fixed costs are the constant, £100, and variable costs are £20 per unit.
30 Correct answer(s):
A Positive correlation means that low values of one variable are associated with low values of the
other, and high values of one variable are associated with high values of the other.
D Negative correlation means that low values of one variable are associated with high values of the
other, and high values of one variable are associated with low values of the other.
Positive correlation means that both variables move together from low to high. Negative correlation
means that as one variable increases, the other decreases.
31 Correct answer(s):
C Diagram (a) represents perfect negative correlation; diagram (b) represents imperfect positive
correlation.
Diagram (a) shows perfect correlation because all the points lie on the line. The correlation is
negative because as X increases, Y decreases.
Diagram (b) shows imperfect correlation because not all the points lie on the line. The correlation is
positive because as X increases, Y increases.
33 Correct answer(s):
A The coefficient of determination must always fall between 0 and +1.
B The correlation coefficient must always fall between –1 and +1.
The correlation coefficient (r) can take any value from –1 (perfect negative correlation) to +1 (perfect
positive correlation).
The coefficient of determination (r2) must therefore lie between 0 and +1.
A major disadvantage of the high-low method is that it does not take into account the full range of
available data. Only two pairs of historical cost data are used in the cost estimation.
A cost estimate produced using the high-low method cannot be used to reliably predict the cost for
any level of activity. It can reasonably be used to estimate a cost within the range of activity covered
by the data available. Although managers are often forced to use this data as a basis for prediction
outside this range, the results will be unreliable.
34 Correct answer(s):
C 72% of the variation in sales revenue can be explained by the corresponding variation in
advertising expenditure.
Correlation coefficient, r = 0.85
Coefficient of determination, r2 = 0.852 = 0.72
The coefficient of determination tells us that 72% of the variation in sales revenue can be explained
by the corresponding variation in advertising expenditure.
35 Correct answer(s):
B When nothing is spent on advertising the average level of sales is £50,000.
C For every £1,000 spent on advertising, sales revenue increases by £20,000 on average.
When nothing is spent on advertising, X = 0.
Y = 5 + (2 × 0) = 5
Therefore, sales revenue is £5 × 10,000 = £50,000 on average.
If £1,000 extra is spent on advertising, then sales increase by 20 × £1,000.
Therefore, the increase in sales revenue when an extra £1,000 is spent on advertising is £20,000 (2 ×
£10,000).
36 Correct answer(s):
B Top management prepare a budget with little or no input from operating personnel.
A ‘top-down’ budgeting process is an imposed style of budgeting. This style of budgeting has its
advantages, but it can cause motivational problems.
38 Correct answer(s):
C (2), (3) and (4) only
Starting each budget from scratch is not a criticism of incremental budgeting as this is a feature of
zero-based budgeting.
39 Correct answer(s):
C The budget for each period is based on the current year’s results, modified for changes in
activity levels.
Increments of expenditure are compared with the expected benefits to be received in a zero-based
budgeting system, not in an incremental budgeting system.
The regular updating of the budget by adding the budget for a further accounting period occurs
with a system of rolling budgets.
40 Correct answer(s):
B A new accounting period, such as a month or a quarter, is added as each old one expires.
C The budget is more realistic and certain as there is a short period between the preparation of
budgets.
The other characteristics relate to annual budgets and zero-based budgets (where each item of
expenditure has to be justified from scratch).
41 Correct answer(s):
B A method of budgeting whereby all activities are re-evaluated each time a budget is formulated.
Zero-based budgeting builds up a budget from scratch. It rejects the assumption that this year’s
activities will continue at the same level next year.
42 Correct answer(s):
C Company C
A product-based budget is most appropriate for company C because a separate budget would be
prepared for each of the diverse products.
Correct answer(s):
E Company B
43 Correct answer(s):
A A forecast is an attempt to predict what will happen.
B A budget is a plan of what is intended to happen.
A forecast is a prediction by management of the expected outcome whereas a budget represents a
set of targets of what management intend to happen. A budget is usually set just once a year
whereas forecasts and re-forecasts can be carried out much more frequently.
The statement ‘All budgets are prepared in financial terms’ is incorrect as often a budget could
include, for example, tonnage of raw material needed or quantity (in units) of finished product.
The statement ‘The master budget consists of a budgeted income statement and a budgeted
balance sheet’ is incorrect as a master budget would also contain a cash flow budget.
The statement ‘A flexible budget adjusts both fixed and variable costs for the level of activity’ is
incorrect as a flexible budget adjusts just variable costs for the level of activity and not fixed costs.
SAMPLE EXAM
44 Correct answer(s):
A zero as the starting point for budgeting the coming year’s overheads
Zero-based budgeting, by its very definition, starts from zero and is built upwards.
The statement ‘a zero variance between budgeted and actual overhead’ is incorrect as this merely
refers to the comparison of actual performance with budgeted performance.
The statement ‘an assumed sales level of zero as the starting point for budgeting the coming year’s
overheads’ is a meaningless statement as an overhead budget would be based on budgeted sales
not zero sales.
The statement ‘an overhead budget of zero’ is incorrect.
SAMPLE EXAM
45 Correct answer(s):
A calculating the budgeted cost for the actual activity
The high-low method of cost estimation is a method of linear extrapolation or interpolation between
two actual data points. It is a method for flexing a budget by calculating the budgeted cost for the
actual activity.
The high-low method uses the highest and lowest costs in the budget period for the extrapolation
process itself.
The measurement of actual cost for the budgeted activity is irrelevant.
The high-low method estimates a single cost at a certain level of activity and not a range of costs.
SAMPLE EXAM
46 Correct answer(s):
A £36,400
47 Correct answer(s):
B £85,680
As sales are increasing at 20% per month the expected sales for February are £120,000 × 120% =
£144,000. As the gross margin is 30% on sales the cost of sales for February is expected to be
£144,000 × 70% = £100,800.
The company policy is to maintain closing inventory at 10% of the expected next month’s sales. The
closing inventory for January is therefore £10,080. The cost of a unit is £2 × 70% = £1.40, meaning
the closing inventory for January is £10,080/£1.40 = 7,200 units.
The budgeted cost of production for January would therefore need to cover January sales
(£120,000/£2 per unit = 60,000 units) plus an increase in inventory from 6,000 to 7,200 units, ie, a
total of 61,200 units. This is a cost of 61,200 × £1.40 = £85,680.
If you incorrectly calculated the cost of production as £84,000 then you calculated the production
volume as 60,000 units (the number sold in January) and did not allow for an increase in inventory
levels.
If you incorrectly calculated the cost of production as £120,000 then you again calculated the
production volume as 60,000 units in error and made a further error in valuing this volume at the
selling price of £2 per unit rather than the cost price.
If you incorrectly calculated the cost of production as £122,400 then you correctly calculated the
production volume as 61,200 units but in error valued this volume at the selling price of £2 per unit
rather than the cost price.
SAMPLE EXAM
48 Correct answer(s):
C (3) only
Big data is relevant to long term as well as short-term decision making and it is updated in real time
so is not out of date. It is often used to predict consumer preferences successfully.
49 Correct answer(s):
A Online video clips of clothes being shared by customers
D Keywords from conversations about fashion on social media
Although the data obtained from sources B, C and E could all be valuable to Fashn Ltd’s managers in
analysing the company’s performance they are all data sets which we would expect to be available
from ‘traditional’ database software within the company.
One of the key benefits big data can provide for a business is the insights it can give in terms of
identifying trends and patterns, and gaining a deeper understanding of customer requirements.
Social media (Options A and D) can be a key source of such data – for example, by identifying what
sorts of designs customers are commenting on favourably and which are receiving less favourable
feedback.
50 Correct answer(s):
C Volume, velocity, variety, veracity
51 Correct answer(s):
A Understanding individual customer preferences
C Analysing the take-up of targeted promotions
Teecee can use information from the interactive website and loyalty cards to track individual
purchases and see which customers are taking advantage of the offers that are targeted at them. The
updating of inventory records would take place as part of the standard point of sale and inventory
accounting systems. Rewarding branch managers for the achievement of sales targets will also use
standard sales information that is already available.
52 Correct answer(s):
C There is a lack of employees within the organisation with appropriate data analytics skills.
E Traditional data management systems cannot readily process unstructured data.
Privacy concerns and cybersecurity risks (A,B) are not avoided by the use of data analytics firms – who
is in control of the data will still be an issue, and all companies with access to such data need to
ensure that they are not infringing the security of other organisations and customers. It is however
true that there is increasing demand for staff who are able to make full use of the data, and specialist
firms will be able to supply this (C). It is not true to say that unstructured data is ‘incorrect’ (D) – it is
more accurate to say that it needs to be analysed to uncover trends and preferences that are not
initially obvious. The sheer volume, complexity and speed of big data means that traditional
forecasting tools and systems cannot readily process it (E).
53 Correct answer(s):
B Resources should be made available when needed throughout the year
D Each employee’s job should be connected with customer needs
Option B relates to the management process principle ‘Resource allocation’. Option D relates to the
leadership principle ‘Customers’.
Option A is incorrect. The management process principle ‘Targets’ suggests that cascaded targets
should be avoided. Option C is incorrect. The management process principle ‘Rhythm’ suggests that
management processes should be organised around events rather than the calendar year.
54 Correct answer(s):
B (1) and (2) only
The beyond budgeting leadership principle ‘purpose’ suggests that people should be inspired by
noble causes; not around short-term financial targets.
55 Correct answer(s):
B Rolling budgets
Rolling budgets are particularly useful during times of uncertainty when businesses need to be
flexible.
Correct answer(s):
F Use of machine learning
Machine learning can be used to obtain more accurate forecasts (and more accurate forecasts lead
to more informed decision making).
Correct answer(s):
G Big data analytics
56 Correct answer(s):
C 110 units
TS = T × S
Quarter 2: T × 150% = 330
T = 330 ÷ 1.5 = 220
Quarter 3 SV = –50%
predicted sales = 220 × 50% = 110
57 Correct answer(s):
D To find the trend
Seasonally adjusting data removes the seasonal element, leaving the underlying trend value.
58 Correct answer(s):
B There is a correlation between the number of faulty products and the machine used.
A correlation between two variables (such as the number of faulty products and the machine used)
does not necessarily mean that the relationship is causal. Therefore, we cannot say definitively that
the cause of the faulty products is the age of the machine. The reason for the faulty products could
be due to an additional variable, known as a confounding variable, such as the labour involved.
We have 12 months’ of data showing a 25% difference in the number of faulty products and this level
of data is unlikely to be because of pure chance.
59 Correct answer(s):
C 732
January 20X1 to December 20X1 are months 1 to 12. April in 20X2 is month 16.
Y = 560 + 9X
Y = 560 + (9 × 16) = 704. This is the trend.
Forecast sales = trend × seasonal variation = 704 × 1.04 = 732
60 Correct answer(s):
B (2) and (3) only
Provided that the multiplicative method is used, it is fine for the trend to be increasing or decreasing.
It is assumed that what happened in the past will happen in the future ie, previous seasonal variations
will continue and there will be no unforeseen events.
61 Correct answer(s):
C Two variables may be correlated because of a confounding variable.
Correlation between two variables does not necessarily mean that a change in one variable causes a
change in the other variable. There could be a third variable, called a confounding variable, that
causes both to change. If a data set is small, then correlation occurring by chance is more likely than
if the data set was large. High levels of correlation are useful for making predictions.
62 Correct answer(s):
63 Correct answer(s):
B (1) and (2) only
There is very little data here (just three individual tests) and so it is difficult to draw any conclusions.
However, based on this small data set, it would appear that management is displaying confirmation
bias; although two out of three copywriters took longer, management is focusing on the positive
result from the copywriter who took the same amount of time. Management is ignoring the data that
disagrees with its belief.
Anchoring refers to being ‘stuck’ on last year’s numbers and so ZBB can be used to help avoid this.
There isn’t enough data to confirm correlation or causation between the two variables (use of new
system and time taken). Even if there were correlation, the relationship might not be causal. There
could be a third, omitted variable, such as each copywriter’s computer memory size, which affects the
time taken.
64 Correct answer(s):
D (3) only
When we see a graph, we tend to accept the way it has been drawn without question. However, in
this case, we need to apply some professional scepticism and think about what the graph is showing.
The scale on the y axis is in mm. Therefore, the difference between the actual level of rainfall in
August and the average level was 766 – 763 = 3 mm ie, 0.3 cm and 0.3cm of rain is not very much
rain at all. Therefore, sales are unlikely to have been affected. The scale used on the y axis of the
graph has created a bias.
65 Correct answer(s):
A The data set
The data set is fine because they covered all sales during the year (ie, the whole population).
The conclusion is not valid. It’s not necessarily the card that is making people spend more. The
customers who chose to own a loyalty card might have spent more anyway.
The data analysis is not clear. For example, use of a loyalty card allows Hollivy Ltd to monitor each
individual shopper and how much they spend. For non-card holders, this is not possible and
estimates have to be made.
The additional budget spend doesn’t seem worth it if there is not a cause and effect relationship
between owning a loyalty card and weekly spend. It is more likely that people who spend more own
a loyalty card, rather than the loyalty card leading people to spend more.
66 Correct answer(s):
A Using training data from all areas of the country.
B Monitoring performance of the system against real data.
Implicit bias in the rules created by humans can allow bias to creep into AI; therefore, using a diverse
team to implement AI can help reduce bias. Data outliers can significantly distort results and so
67 Correct answer(s):
B Confirmation
D Omitted variable
The competitor is likely to have influenced the sales volume and yet this variable has been omitted.
If Monkie Ltd believed that the marketing director was failing before last year, then the latest results
could have created a confirmation bias where people only see data that confirms their beliefs.
68 Correct answer(s):
C Graphs can be manipulated to introduce bias.
The axes on graphs can be manipulated or data can be omitted from the graph.
The first option refers to confirmation bias.
The second option refers to cognitive bias.
The last option is incorrect. AI can contain bias if the training data is biased or the humans who write
the rules introduce bias.
2 Correct answer(s):
D £18,250
3 Correct answer(s):
C £17,600 inflow
Depreciation and profits and losses on sales are accounting entries only. The only amount that will
appear in the cash budget is the receipt of the £17,600 sale proceeds.
4 Correct answer(s):
B £20,000
July receipts
(Ignore the discounts: the percentages add to 100 so discounts have already been accounted for)
20% July sales = £5,000
60% June sales = £12,000
10% May sales = £3,000
Total = £20,000
5 Correct answer(s):
A £338,025
Receipts for March:
If you selected £347,313, you forgot that receivables who pay in the month after sale are entitled to a
4% discount.
If you selected £568,550 you calculated the amount to be received from credit customers as 80%
and 15% respectively of total sales, rather than of the credit sales.
The option of £587,125, combines both of the errors discussed.
6 Correct answer(s):
B 43%
Suppose the total gross invoiced sales is £100.
Cash received 45%.
But these customers have taken a 10% discount before paying, hence the gross value of bills settled
is 45/0.9 = £50
Bad debts 7% = £7
Balancing figure ie, received in month two = £43
Total = £100
If you selected 38% or 58%, you did not deal correctly with the early settlement discount. If you
selected 48%, you made no allowance at all for the discount.
7 Correct answer(s):
A £211,475
If you selected £215,675, you forgot to allow for the 4% settlement discount.
The option of £290,284 calculates the receipts on the assumption that the first customers pay in the
month of sale rather than in the month after sale.
If you selected £299,500, you combined both errors.
8 Correct answer(s):
B £25,500
Production of Z Units
Sales requirement 10,000
Closing inventory 15,000
25,000
Purchases of W Litres
Purchase requirement (11,000 units × 2 litres) 22,000
Closing inventory 15,000
37,000
Opening inventory (20,000)
17,000
Cost at £1.50 per litre £25,500
If you selected £17,000, you forgot to value your answer in litres at a cost of £1.50 per litre.
If you selected £33,000, you made no allowance for the reduction in materials inventory.
If you selected £34,500, you reversed both the adjustments for changes in inventory.
9 Correct answer(s):
D £24,060
If you selected £19,740, you deducted the change in payables balance from the cost of sales. The
reduction in the payables balance should have been added, since this means that higher payments
were made to suppliers to reduce the balance owed.
The option of £21,900 is the cost of sales, which takes no account of the change in the payables
balance.
If you selected £23,340, you took the cost of sales to be 40% of the sales value, instead of 60%.
10 Correct answer(s):
B £62,143
Bendy will pay for March’s purchases in May.
In March, he will top up inventories by those required for June’s sales.
Cost of goods sold in June = £87,000 × 100/(100 + 40) = £62,143
The more traditional approach to calculating this would be:
If you selected £52,200 you deducted a profit margin of 40% to determine the cost of goods sold,
instead of deducting a 40% mark-up.
If you selected £64,286 you misinterpreted the timings of purchases and calculated the payments as
being the cost of goods sold in May.
If you selected £87,000 you interpreted the timings of purchases correctly but then you forgot to
deduct the profit mark up.
11 Correct answer(s):
A £327,000
£’000
Cost of sales for month = £520,000 × 70% 364
Increase in trade payables (15)
Decrease in inventory (22)
Budgeted payment to trade payables 327
If you selected an incorrect option, you did not deal correctly with the change in trade payables and
inventory balances.
An increase in trade payables will reduce the amount paid to suppliers, since more credit is being
taken. A decrease in inventory will also reduce the amount paid to suppliers because required
purchases will be lower.
12 Correct answer(s):
B £9,400
Month 1 2 3 4
Units Units Units Units
Sales 2,000 2,200 2,500 2,600
Closing inventory 1,100 1,250 1,300
Opening inventory (1,000) (1,100) (1,250) (1,300)
Purchases 2,100 2,350 2,550
Payments (£) 8,400 9,400 10,200
If you selected £8,200, you reversed the opening and closing inventory figures for Month 2.
The cost of sales of £10,000 for Month 3 is the incorrect figure.
If you selected £10,200, you have calculated the purchases figure for Month 3. However, the question
asks for the budgeted payment for Month 3, which represents Month 2 purchases.
13 Correct answer(s):
C £50,200
May
Production requirements (8,400 units × 3 kg) 25,200 kg
Closing inventory 4,100 kg
29,300 kg
Less opening inventory 4,200 kg
Purchase budget 25,100 kg
25,100 kg × £2 per kg = payment for purchases in June £50,200
If you selected £25,100, this is the figure for quantity of material to be paid for, not its value.
The option of £48,800 is the value of June purchases, which will be paid for in July.
If you selected £50,600, your adjustments for opening and closing material inventories were the
wrong way round.
Correct answer(s):
F £231,000
£
75% × May wages cost = 75% × 8,400 × £7 × 4 hours 176,400
25% × April wages cost = 25% × 7,800 × £7 × 4 hours 54,600
Wage payments for May 231,000
If you selected £222,600, you calculated the payment the wrong way round as 25% of May wages
cost and 75% of April wages cost.
If you selected £233,800, you calculated the payment as 75% to be paid in the month and 25% in
advance for the following month.
The option of £235,200 is the labour cost for May, which makes no allowance for the timing of cost
payments.
14 Correct answer(s):
D £143,000
£
Average receivables after change in policy 90/360 × £960,000 × 120% 288,000
Less: current average receivables 60/360 × £960,000 (160,000)
Increase in receivables 128,000
Increase in inventories 30,000
Increase in payables (15,000)
Net increase in working capital investment 143,000
If you selected £31,000, you calculated the effect of the 30 days increase in the collection period
based on only the increase in the sales revenue, rather than on all of the sales revenue.
If you selected £95,000, you took no account at all of the increase in sales revenue and if you
selected £113,000 you reversed the adjustments for the changes in inventories and trade payables.
An increase in inventories means that more money will be invested in working capital and the reverse
applies for payables.
16 Correct answer(s):
C Arrange an overdraft
D Implement better credit control procedures
Arranging short-term finance in the form of an overdraft and encouraging receivables to pay sooner
will alleviate the short-term cash deficit problem.
Paying payables early would exacerbate the situation and issuing shares is most appropriate for long-
term finance.
Replacing non-current assets would not provide any extra cash with immediate effect, thereby
making the situation worse in the short term.
17 Correct answer(s):
D Maximum: £12,000; End of June: £8,000
18 Correct answer(s):
A £82,500
19 Correct answer(s):
B Buy back the company’s shares
C Increase payables by delaying payments to suppliers
Buying back the company’s shares would be a suitable use of a long-term surplus (but not short-
term), by returning surplus cash to the shareholders.
Increasing payables would increase the surplus still further because additional credit would be taken
from suppliers.
SAMPLE EXAM
20 Correct answer(s):
B £403,000
£
Inventories 60/365 × 40% of £3m 197,260
Receivables 35/365 × £3m 287,671
484,931
Trade payables 25/365 × 40% of £3m (82,192)
402,739
If you selected £280,000 or £699,000, you valued the trade payables and the inventories respectively
at sales value. However, as far as the company’s working capital is concerned, their investment
amounts to the cost value of these elements.
If you selected £567,000, you added the trade payables figure, but the availability of trade credit
reduces the required investment in working capital.
21 Correct answer(s):
C 17 weeks
Weeks
Raw materials 3
Payables (6)
Production 2
Finished goods 7
Receivables 11
If you selected 29 weeks you added the payables period instead of deducting it. However, the
availability of credit from suppliers reduces the cash operating cycle.
22 Correct answer(s):
B 182 days
Days
Raw material inventory turnover (250/1,070 × 365 days) 85.3
Less payables: average payment period (162/1,070 × 365) (55.3)
30.0
Production cycle (WIP turnover) (115/1,458 × 365) 28.8
Finished goods inventory turnover (186/1,458 × 365) 46.6
Debt collection period (345/1,636 × 365) 77.0
Full operating cycle 182.4
If you calculated the operating cycle to be 174 days, you made the common mistake of basing the
calculation for raw materials inventory and payables on the figure for cost of goods sold. If the
purchases figure is not available, then this might be acceptable but the use of the purchases figure is
more accurate.
23 Correct answer(s):
A Lower net operating cash inflow
D Slower inventory turnover
When the cash cycle lengthens, there will be a slow-down in operating cash inflows, and net cash
inflow will be lower. The reasons for a longer cash cycle could be a slower inventory turnover, a
lengthening of the average credit period taken by customers and/or paying suppliers sooner. Net
assets will be either increased or remain the same, depending on how the extra working capital is
financed. Net assets should not decrease, however, and so net asset turnover should not rise.
24 Correct answer(s):
B 66 days
If you selected 65 days, you based your payables calculation on the cost of goods sold. Since credit
is received on the purchases for the year, this should be the basis of the calculation.
If you selected 68 days, you miscalculated the sales revenue using a 20% mark up rather than a 20%
margin.
If you selected 118 days, you added together the days for each element of working capital. However,
the payables period, during which the company takes credit from suppliers, reduces the length of
the cycle and hence should be deducted.
25 Correct answer(s):
A Cash operating cycle: Decrease; Liquidity ratio: Decrease
The reduction in the amount of time taken for customers to pay their bills would reduce the cash
operating cycle.
The reduction in receivables and in the overdraft mean that the numerator and denominator of the
liquidity ratio would both reduce by the same amount. Therefore, the ratio would decrease.
26 Correct answer(s):
B 0.91
Quick ratio = Current assets excluding inventories/current liabilities
= (2.8 + 0.3)/(2.6 + 0.8)
= 0.91
If you selected 0.31, you included the loan repayable in five years in the denominator. Since the ratio
is concerned with short-term liquidity this long-term loan should have been excluded.
If you selected 1.80, you included non-current assets, inventories and the long-term loan in your
calculation. All of these should be excluded for the same reason as stated above.
If you selected 2.15, you included inventory in the numerator. This would have been the correct
calculation for the current ratio, but not the quick ratio.
27 Correct answer(s):
B Decrease
Correct answer(s):
D Increase
Let receivables = 100
Cash = 50
Therefore payables = 300
Proposal 1
Receivables = 0
Cash = 50 + 98 (100 less 2%) = 148
Therefore current ratio = 148/300
= 0.493
Proposal 2
Cash and payables will both rise at same rate, say, by 50.
Therefore current ratio = 200/350
= 0.57
29 Correct answer(s):
A Increase
Correct answer(s):
E Decrease
The quick ratio is current assets (excluding inventory) divided by current liabilities. If cash is used to
reduce trade payables then both the numerator and denominator will reduce. As the quick ratio is
less than 1:1 the denominator is larger than the numerator. This means that the same absolute
change to the numerator would represent a smaller proportionate change to the denominator than
the numerator, thereby reducing the ratio.
30 Correct answer(s):
A £3,100
The inventory value is £2,100. The rate of inventory turnover is 10 times pa, therefore the annual cost
of sales is £21,000 (we are told opening inventory equals closing inventory). The gross profit margin
is 30% which means annual sales are £21,000/0.7 = £30,000.
The receivables collection period is 1 month, which means closing receivables are £30,000/12 =
£2,500.
The payables payment period is 1.6 months, which means closing payables are £21,000/12 × 1.6 =
£2,800.
The quick ratio is 2:1 which means current assets (excluding inventory) are £2,800 × 2 = £5,600. As
receivables are £2,500 the cash balance must be (£5,600 – £2,500) = £3,100.
If you calculated incorrectly the cash balance as £1,000 then you probably incorrectly calculated
closing payables as £21,000/12 = £1,750 which would mean current assets (excluding inventory) of
£3,500 and cash of (£3,500 – £2,500) = £1,000.
If you calculated incorrectly the cash balance as £100 then you probably incorrectly calculated
closing receivables as £2,100/12/0.7 = £250 and closing payables as £2,100/12 = £175 and
therefore current assets (excluding inventory) of £350.
SAMPLE EXAM
31 Correct answer(s):
B £26,600
January sales are £350,000 × 12% = £42,000. Sales in each of the other months are (£350,000 –
£42,000)/11 = £28,000.
March cash collections will be:
50% of March sales = £28,000 × 50% = £14,000
45% of February sales = £28,000 × 45% = £12,600
Total = (£14,000 + £12,600) = £26,600
32 Correct answer(s):
C 47 days
The company’s cash operating cycle is calculated as:
(Inventory days + receivables days – payables days)
Inventory days = £490,000/£4,500,000 × 365 = 39.7 days
Receivables days = £610,000/(£4,500,000/0.68) × 365 = 33.6 days
Payables days = £340,000/£4,660,000 × 365 = 26.6 days
Note: The cost of sales value is used for the inventory days and also to calculate sales (using the
gross margin of 32%). However, the purchases figure is used to calculate the payables days.
The answer is therefore (39.7 + 33.6 – 26.6) days = 46.7 days (rounded to 47).
If you incorrectly calculated the answer as 34 days, then you probably rounded up the inventory days
to 40 days, added the payables days in error (also rounded up at 27 days) and then deducted the
receivables days (rounded down to 33 days).
If you incorrectly calculated the answer as 44 days, then you probably used the purchases figure of
£4,660,000 in the calculations for inventory days and receivables days rather than the cost of sales
figure.
If you incorrectly calculated the answer as 51 days, you probably calculated the inventory days and
payables days correctly but used the wrong gross margin to calculate the sales figure in the
receivables days formula (using 22% margin rather than 32%).
SAMPLE EXAM
33 Correct answer(s):
C 2 months
Months
The average time the raw materials are in inventory 1.0
Less the time taken to pay suppliers (2.5)
Time taken to produce the goods 2.0
Time taken by customers to pay for the goods 1.5
Total 2.0
34 Correct answer(s):
D Current assets and current liabilities
The purchase of goods increases inventory (current assets) while the taking of credit in respect of the
purchase increases payables (current liabilities).
35 Correct answer(s):
A 21 days
Correct answer(s):
E 28 days
36 Correct answer(s):
A profitability and risk
All businesses face a trade-off between being profitable and being liquid. Less liquidity may yield
greater profitability, but less liquidity equals greater risk (A). Liquidity and risk (B) are not the trade-off
– they are on the same side of the trade-off. The equity and debt (C) trade-off is concerned with long-
term capital structure rather than current assets and the short-term versus long-term borrowing
trade-off (D) is a financing decision unrelated to current assets.
37 Correct answer(s):
A Reducing the credit period extended to receivables
C Extending the period of credit taken from suppliers
D Reducing the production period
A business suffering from liquidity problems might consider:
• reducing the production period – not easy to do but it might be worth investigating different
machinery or different working methods.
• reducing the credit period extended to receivables.
• extending the period of credit taken from suppliers.
The business would not want pay its payables quicker (B) or to hold inventory for longer (E).
38 Correct answer(s):
A A lengthening of the cash operating cycle
D A rapid increase in sales
There is no reason to believe that the current ratio would increase (C) – there could be a rapid
increase in current assets (particularly receivables) but this would be often more than matched by a
commensurate increase in current liabilities (payables and bank overdraft). A lengthening cash
operating cycle (A) and a rapid increase in sales (D) are the classic signs of overtrading.
39 Correct answer(s):
B Insurance
C Opportunity cost of capital tied up
Holding costs include insurance (B) and the opportunity cost of capital tied up (C). (D) and (E) are
production costs, while clerical and administrative expenses are overheads.
40 Correct answer(s):
C Higher ordering costs and lower average inventory
41 Correct answer(s):
A The cost of holding one unit of inventory for one period
c is the cost of placing one order and d is the estimated usage of the inventory item over the period.
42 Correct answer(s):
C 1,600 boxes
EOQ = 1,600 boxes and the re-order interval = 40 days
Annual demand = 40 × 250 = 10,000 boxes = d
Order cost = £64 = c
Holding cost per year per unit = 25% of £2 = £0.50 = h
2cd 2 × 64 × 10,000
EOQ = = = 1,600 boxes
h 0.5
43 Correct answer(s):
C ABC system
The ABC system is the most suitable. It aims to reduce the work involved in inventory control in a
business which may have several thousand types of inventory items. It is a technique which divides
inventory into sub-classifications based on their annual usage and involves using different control
systems for each classification.
44 Correct answer(s):
D liquidity and profitability
All businesses face a trade-off between being profitable (providing a return) and being liquid
(staying in business).
45 Correct answer(s):
A Yes
Credit control in many businesses is managed jointly by the treasury management and recording
transactions (receivables ledger) departments, via a separate credit control department.
Correct answer(s):
C Yes
Treasury management involves managing cash surpluses and deficits by making short-term
investments, and also managing working capital from day to day so as to optimise cash flow,
including inventory, receivables (credit control) and payables management.
Correct answer(s):
F No
Management accounting will attend to capital investment appraisal.
46 Correct answer(s):
A Included
Correct answer(s):
47 Correct answer(s):
D 30.0%
If the company is offering a 10% discount for settling within the first month, then if it receives 45% of
gross sales value that must equate to 45 × 100/90 = 50% of invoices settling within that first month.
With bad debts of 20%, that leaves 30% to be collected in the second month.
48 Correct answer(s):
B £243,400
The closing receivables of £72,000 represent the customers who did not take advantage of the
discount available in December; the total invoicing on 30 November must therefore have been
£72,000 × 2 = £144,000. This means that from January to October invoicing was £276,000 –
£144,000 = £132,000.
Cash Discount
received allowed
£ £
Opening receivables taking discount (£56,000 × 0.5 × 0.9) 25,200 2,800
Opening receivables not taking discount (£56,000 × 0.5) 28,000 –
Sales in year taking discount (£132,000 × 0.5 × 0.9) 59,400 6,600
Sales in year not taking discount (£132,000 × 0.5) 66,000
November invoicing taking discount (£144,000 × 0.5 × 0.9) 64,800 7,200
243,400 16,600
2 Correct answer(s):
C Distributed to as many managers as possible
Reports should be communicated to the manager who has responsibility and authority to act on the
information. There is no point in distributing reports to managers who cannot act on the information
contained therein.
In this situation managers could suffer from information overload where they are supplied with so
much information that their attention is not drawn clearly to that which is specifically relevant to them.
Important information could be overlooked or simply ignored.
SAMPLE EXAM
3 Correct answer(s):
C Reporting only of variances which exceed a certain value
When reports are prepared using the exception principle, areas that are conforming to plan are
given less prominence in control reports, allowing managers to focus on areas requiring attention.
4 Correct answer(s):
B Reports should be clear and comprehensive.
D Based on the information contained in reports, managers may decide to do nothing.
Management reports should be sufficiently accurate for the purpose intended. Complete accuracy
might not be possible, or might take so long to attain that the value of the information is diminished
by its late arrival.
Although reports should distinguish between controllable and uncontrollable items it is incorrect to
say that uncontrollable items should not be included. Uncontrollable items might be included for
information rather than for action.
5 Correct answer(s):
C Revenue focused
Although managers might focus on the achievement of revenues in the context of a budget
constrained or profit conscious style of evaluation, ‘revenue focused’ is not a specific style identified
by Hopwood.
6 Correct answer(s):
A Budget constrained
7 Correct answer(s):
C Improve gross profit
A new budgetary planning and control system is not designed to improve actual performance levels.
It is designed to improve the control of actual performance, the coordination of activities, and the
communication of ideas and plans.
8 Correct answer(s):
B Rapid management response to changes in the trading environment
One of the advantages of decentralisation is the opportunity for a speeder response to problems
and situations as a result of divisional managers’ more detailed and ‘local’ knowledge.
Improved goal congruence is not an advantage of decentralisation. Once an organisation is
decentralised it might effectively divide into a number of self-interested segments.
The availability of objective performance measures is not an advantage of decentralisation. There are
often difficulties in setting suitable measures of performance in decentralised organisations.
Improved communication is not an advantage of decentralisation. There are often difficulties with
communication between managers in a decentralised organisation.
9 Correct answer(s):
B (1), (2) and (3) only
Apportioned head office costs are not controllable by the manager of an investment centre.
Discretionary fixed costs (those which do not have to be incurred in the short term, such as
advertising and training) are within the manager’s control since they can be increased or reduced at
fairly short notice.
The level of inventory in the division is a part of the capital invested in the division, which is usually
controllable by the manager of an investment centre. The manager also has control over the revenue
from sales within the organisation (transfer prices).
10 Correct answer(s):
B [C – F] – [(N + D + I + B) × R]
The fixed costs are labelled as controllable therefore they should be deducted from the contribution,
but the head office charges should not. The divisional manager cannot exercise control over the
latter costs and therefore should not be held responsible for them.
The divisional manager is responsible for the non-current assets and all of the current assets.
Although inventories of goods for sale are kept in central stores, the division calls off its requirements
on a monthly basis. The divisional manager is therefore responsible for the amount of inventory held.
12 Correct answer(s):
B The revised divisional ROI will be above 20% and the manager will not make a goal congruent
decision.
Revised profit £m
Current projection 4.5
Profit on sale of houses (£14m – £12m) 2.0
6.5
13 Correct answer(s):
B 19.3%
£
Original profits £300,000 × 18% 54,000
Profit on sale 5,000
Revised profit 59,000
£
Original net asset value 300,000
Less carrying amount of asset sold (15,000)
Plus cash received from sale of asset 20,000
305,000
14 Correct answer(s):
C Supplier
The supplier perspective is not one of the four perspectives of the balanced scorecard. Aspects of a
supplier relationship would be monitored, if appropriate, within the internal business perspective.
15 Correct answer(s):
B (2) only
(1) is false as the ROI and residual income might be used as one of the measures within the financial
perspective.
(2) is true as the residual income will increase because the additional imputed interest charge will
be lower than the additional profit generated.
(3) is false as the internal business perspective monitors what the business must be good at in order
to succeed, for example, the average set-up time or the speed with which inter-departmental
queries are handled.
(4) is false as a disadvantage of residual income (RI) is that it does not facilitate comparisons
between investment centres. The same absolute value of RI might be earned by two investment
centres but it is much easier for a larger investment centre to generate a given level of RI than it
is for a smaller investment centre.
16 Correct answer(s):
C A budget which shows the costs and revenues at different levels of activity
A flexible budget recognises different cost behaviour patterns and is designed to change as the
volume of activity changes.
A flexible budget includes both fixed and variable costs, and identifies them separately. Therefore,
the first statement is not correct. Any budget can be prepared using a spreadsheet model therefore
the last statement is not correct.
17 Correct answer(s):
D (2) only
Statement (1) is not correct. A fixed budget may be useful for control purposes where activity levels
are not prone to change, or where a significant proportion of costs is fixed, so that alterations in
activity levels do not affect the costs incurred.
Statement (2) is correct. Fixed and variable costs must be separately identified so that the allowance
for variable costs may be flexed according to the actual activity level.
Statement (3) is not correct. Budgetary control procedures can be used to monitor and control
income as well as expenditure.
18 Correct answer(s):
B £370,300
£
Substituting in 80% activity
Variable cost = 80 × £400 32,000
Total cost 62,000
Therefore fixed cost 30,000
£’000
Variable material 77 × £2,000 154.0
Variable labour 77 × £1,500 115.5
Production overhead
Variable 77 × £400 30.8
Fixed 30.0
Other overhead 40.0
370.3
If you selected £330,300 you did not include a fixed cost allowance for the other overhead. The
option of £373,300 ignores the fact that production overhead is a semi-variable cost and the option
of £377,300 simply multiplies the total cost for 70% activity by a factor of 1.1. This makes no
allowance for the fact that there is an element of fixed costs within production overhead, and other
overhead is wholly fixed.
SAMPLE EXAM
19 Correct answer(s):
B Investment centres have the highest degree of autonomy and cost centres have the lowest.
Cost centres have the lowest degree of autonomy with managers only able to control costs. Profit
centres have a higher degree of autonomy as managers can not only control costs but can also
control sales prices and revenue. Investment centres have the highest degree of autonomy as
managers can not only control costs and revenues but can also make investment decisions not open
to managers in either of the other two centres.
SAMPLE EXAM
20 Correct answer(s):
A P – [(F + S) × R]
Controllable residual income is defined as controllable profit less the ‘cost of capital’ used in the
business, to the extent that capital is controllable.
Controllable profit is not N (as management cannot control the head office management charges)
but is P.
21 Correct answer(s):
A Each manager should know the criteria used for evaluating his or her own performance.
Under a responsibility accounting system, it is imperative that each manager knows what is expected
of them. The criteria used for evaluation of their performance must therefore be known.
The statement ‘The details on the performance reports for individual managers should add up to the
totals on the report of their superior’ is not necessarily true and is certainly not required for a
responsibility accounting system.
The statement ‘Each employee should receive a separate performance report’ represents best
practice but this is not a feature of a responsibility accounting system.
The statement ‘Service department costs should be apportioned to the operating departments that
use the service’ is true but relates to a method of cost apportionment and is irrelevant when
considering a responsibility accounting system.
22 Correct answer(s):
C 17.9%
Residual income is calculated by comparing the actual return with the target return using the cost of
capital. The ranking of the three divisions based on return on investment is:
P - Third
Q - Second
R - First
To establish the ranking using residual income the following table is produced:
Cost of capital
Actual return using
ROI At 11.9% At 13.9% At 17.9% At 23.9%
P £132k £130.9k £152.9k £196.9k £262.9k
Q £156k £142.8k £166.8k £214.8k £286.8k
R £210k £178.5k £208.5k £268.5k £358.5k
The residual income at each cost of capital is calculated by subtracting the cost of capital from the
actual return:
Residual
income
At 11.9% At 13.9% At 17.9% At 23.9%
P 3rd 3rd 3rd 2nd
Q 2nd 2nd 2nd 1st
R 1st 1st 1st 3rd
The highest cost of capital where the rankings agree to the ROI rankings is therefore 17.9%.
23 Correct answer(s):
C ROI: No; RI: No
Current ROI is 400/2,000 = 20%
Project ROI = 30/200 = 15%, so reject as overall result would fall below 20%.
Project RI = 30 – (0.16 × 200) = (2), so reject
Failing to evaluate the project separately eg, combining it with existing results would produce an ROI
in excess of 16% and a positive RI which may have led you to say yes.
24 Correct answer(s):
B Capital employed: Gross book value; Accounting profit: Profit after charging depreciation on a
straight-line basis
To get a constant ROI both profits and capital should be constant. Reducing balance depreciation
would increase profits over the life. Net book value would decrease the capital figure.
25 Correct answer(s):
C (1) is correct and (2) is incorrect
Accounting information in the cloud can be accessed from anywhere, at any time, from a browser or
mobile device and can be accessed by multiple users at once.
Cloud applications are usually rented rather than purchased meaning that there are no upfront costs.
In addition to this, costs such as maintenance and software upgrades are borne by the supplier.
26 Correct answer(s):
A Management information quality is improved as best practice can be implemented
B There is a more consistent management of business data
Knowledge sharing in a SSC should lead to an improvement in quality of the service provided.
A SSC allows standard approaches to be adopted across the organisation leading to more consistent
management of business data.
27 Correct answer(s):
A Accounting software update manager
Although cloud accounting applications are designed for ease of use, a company will still need
trained accounting staff (option B), and it will still have its own internal management reporting
timetables to adhere to (option D). Internet access is vital for cloud accounting applications (option
D). However, it will no longer need to worry about the management of accounting software updates,
as the provider will include that in its subscription fee (option A).
28 Correct answer(s):
C Number of complaints about processing delays
F Percentage of reports issued to department heads on time
Options C and F focus on the internal customer. Number of complaints and reports delivered to
department heads on time will both measure customer satisfaction levels.
Cost per accounting transaction processed = financial perspective
Time saved updating payroll file for overtime payments = internal business perspective
Number of new projects set up = internal business perspective
Training days per employee = innovation and learning perspective
29 Correct answer(s):
D (3) only
The data collection system was simple, so no bias should have been introduced.
The data is presented in a simple table and is therefore not misleading.
The conclusion reached is flawed because it has not taken into account the fact that only 35% of
Division C customers responded to the survey.
30 Correct answer(s):
B Anchoring
The manager has relied on the first percentage increase that they came across and this amount has
anchored the decision.
31 Correct answer(s):
C (2) only
The chart scale starts at sales of £475,000 and so the image is misleading. If it were re-drawn starting
at zero, it would look like this:
This shows that there is not a significant difference in sales between the divisions.
2 Correct answer(s):
C 1 only
Statement 1 is correct. The use of standards is limited to situations where output can be measured.
Statement 2 is not correct. Standards can include allowances for inefficiencies in operations, through
the use of attainable standards.
Statement 3 is not correct. Standards and budgets are both used for planning and control purposes.
3 Correct answer(s):
D Actual prices are different from forecast prices
All of the other options given will give rise to a variance.
Forecast prices are merely a prediction of what prices might be in the future. Once these forecasts
are incorporated into budgets or standards, then they become formalised plans that the organisation
will aim to achieve. Differences between the actual results and the budgets or standards will cause
variances.
4 Correct answer(s):
C £328 adverse
Material price variance
£
8,200 kg did cost 6,888
But should have cost (×£0.80) 6,560
328 (A)
If you calculated the variance to be £286 you based your calculations on the materials issued to
production. However, the material inventory account is maintained at standard cost, therefore the
material price variance is calculated when the materials are purchased. If you selected £328
favourable you calculated the size of the variance correctly but you misinterpreted it as favourable.
SAMPLE EXAM
5 Correct answer(s):
B £152.00 adverse
If you selected £152 favourable you calculated the size of the variance correctly but you
misinterpreted it as favourable.
If you selected £159.60 adverse you evaluated the usage variance in kg at the actual price per kg,
instead of the standard price per kg.
The result of £280 adverse bases the calculation of standard usage on the budgeted production of
850 units. This is not comparing like with like. The comparison should be based on a flexed budget
for the actual production level.
SAMPLE EXAM
6 Correct answer(s):
B £672 adverse
Standard variable overhead cost per unit = £3,120/520 units = £6 per unit
£
Standard variable overhead cost for 560 units (×£6) 3,360
Actual variable overhead cost 4,032
672 adverse
If you selected £240 adverse you compared the standard cost for 560 units with the standard cost for
520 units. This indicates the volume effect of the change in output but it is not the variable
production overhead total variance.
If you selected £672 favourable you calculated the correct money value of the variance but you
misinterpreted its direction.
The variance of £912 adverse is the difference between the standard cost for 520 units and the actual
cost for 560 units. This is not a valid comparison for control purposes because of the different output
volumes.
7 Correct answer(s):
A £448 favourable
Standard variable production overhead cost per hour = £3,120/1,560 = £2 per hour
£
2,240 hours of variable production overhead should cost (×£2) 4,480
But did cost 4,032
448 (F)
If you selected £448 adverse you calculated the correct money value of the variance but you
misinterpreted its direction.
£672 adverse is the variable production overhead total variance.
The variance of £912 adverse is the difference between the standard cost for 520 units and the actual
cost for 560 units. This is not a valid comparison for control purposes because of the different output
volumes.
If you selected £1,008 adverse you valued the efficiency variance in hours at the actual variable
production overhead rate per hour.
If you selected £1,120 favourable you calculated the correct money value of the variance but you
misinterpreted its direction.
If you selected £1,360 adverse you based your calculation on the difference between the original
budgeted hours for 520 units and the actual hours worked for 560 units. This is not comparing like
with like. You should have flexed the allowance for comparison purposes.
9 Correct answer(s):
A £1,200 adverse
£
Budgeted fixed overhead cost £10 ×1,000 10,000
Actual fixed overhead cost 11,200
Fixed overhead expenditure variance 1,200 (A)
If you calculated the variance to be £800 you flexed the budget cost allowance for fixed overhead. By
definition, the budgeted expenditure on fixed overhead does not alter when the activity level
changes.
10 Correct answer(s):
A All sales variances and all marginal cost variances
Budgeted contribution is different from actual contribution because of all of the sales and marginal
cost variances which have arisen.
SAMPLE EXAM
11 Correct answer(s):
A £424,810
If you calculated the profit to be £435,650 you double-counted the material price variance, which
would be included within the material total variance.
If you selected £483,190 you added the adverse variances to the budgeted contribution and
deducted the favourable variances. However, an adverse variance will reduce the actual profit to a
result below the budgeted profit and vice versa for favourable variances.
If you selected £634,810 you forgot to deduct the budgeted fixed overhead.
12 Correct answer(s):
D 18,700
1,200 hours is the efficiency variance in terms of hours, and 17,500 is the actual number of hours
worked.
If you selected 16,300 hours you treated the efficiency variance as adverse instead of favourable.
13 Correct answer(s):
A £1.50
If you selected £1.70 you added the adverse variance per kg to the actual price instead of deducting
it. If the variance is adverse then the standard price must be lower than the actual.
If you selected £1.80 you based your unit rate calculations on the standard materials usage instead
of the actual materials purchased and used. The price variance is always based on actual quantities.
14 Correct answer(s):
B Both statements are incorrect
Favourable variances may not always be good. For example, a favourable materials variance might
be achieved by buying poorer quality material which means that the labour force have to spend
much longer working on the material leading to an adverse labour variance.
Variance reporting is the reporting of differences between the actual results and the flexed budget
not the original budget.
15 Correct answer(s):
B Uncontrollable
Uncontrollable variances are variances which have arisen by chance. They are random deviations.
Controllable variances result from a manager’s actions and decisions.
Marginal cost is the cost of producing one more unit of production.
16 Correct answer(s):
D 1, 2 and 4 only
All of these apart from personnel would influence the decision to investigate a variance as they
include cost/benefit considerations, whether the variance can be controlled and what the movement
of the variance suggests is a trend.
17 Correct answer(s):
B Achieving a lower output volume than budgeted
Variations in output volume should not affect usage of materials per unit produced. The calculation
of the usage variance is based on a flexed budget allowance for the actual volume achieved.
A high-quality material might reduce wastage or scrap levels that in turn would improve the materials
usage rate.
Lower quality control standards should lead to fewer items being rejected, a higher proportion of
successfully-completed items, and so an improvement in materials usage.
A reduction in material wastage rates will also improve the materials usage rate.
18 Correct answer(s):
A Adverse
If the standard material price was set too low then an adverse material price variance is likely to arise.
19 Correct answer(s):
B Working fewer hours than the flexed labour hours budget predicts
Variable overhead efficiency variance = (standard hours for actual output – actual hours) × standard
variable overhead rate per hour.
Of the options available, only working fewer hours than standard will result in a favourable variance.
Material usage and fixed overhead will have no impact on the efficiency variance. Since the variance
is evaluated at the standard rate per hour it will not be affected by the actual variable overhead cost
per hour.
20 Correct answer(s):
C Lower hourly rates than standard and lower than standard labour hours for the actual production
To be certain of a favourable labour total variance it would be necessary for both the labour rate
variance and the labour efficiency variance to be favourable.
All of the options will result in a favourable labour rate variance.
If labour hours are lower than budgeted it is possible that the labour efficiency variance will be
favourable, but not certain. The hours could be lower because production output was lower than
budgeted, not because labour were working efficiently. The efficiency variance could still be adverse
when the correct comparison is made with the flexed budget.
21 Correct answer(s):
A £1,250 adverse
If you calculated the variance to be £4,750 you compared the actual material cost for 1,250 units with
the budgeted cost for 1,000 units. This is not a valid comparison for control purposes.
22 Correct answer(s):
C 7.2% adverse
23 Correct answer(s):
B £50,000
£
Actual expenditure on overheads 108,000
Fixed overheads under budget 8,000
Budgeted expenditure on overheads 116,000
Less budgeted variable overhead expenditure
= actual expenditure (£3 × 22,000) 66,000
Budgeted fixed overhead expenditure 50,000
If you selected £34,000 you adjusted for the fixed overheads under budget by subtracting them
instead of adding them to the actual expenditure. £66,000 is the budgeted variable overhead
expenditure for the actual production and £116,000 is the total budgeted overhead for the period.
24 Correct answer(s):
D (Actual output) × (Standard machine hours per unit)
Absorption costing always uses the budgeted (or standard) production time, as flexed by the actual
output in a period. This means that the actual output is multiplied by the standard machine hours per
unit in order to establish a flexed budget of machine hours for the actual production. The value of
overheads absorbed would therefore be the absorption rate multiplied by this flexed budget.
If you selected (planned output) × (standard machine hours per unit) then the result would be the
budgeted level of absorbed overhead rather than the actual absorbed overhead.
If you selected (actual output) × (actual machine hours per unit) then the result would include any
production efficiencies or inefficiencies in the actual machine hours and this would result in an
incorrect calculation of absorbed overhead.
If you selected (planned output) × (actual machine hours per unit) then you have reversed the
selections you should have made.
SAMPLE EXAM
25 Correct answer(s):
A £250 adverse
The cost of material purchased was £1,500/2,500 per kg, or 60p per kg. The standard cost is 50p per
kg, an adverse variance of 10p per kg. In February a total of 2,500 kg were purchased of which 2,300
kg were used and as there was no opening inventory 200 kg was left in closing inventory. If inventory
were valued at actual cost then some of the adverse price variance would be carried forward in
inventory. However, we are told that inventory is valued at standard cost and therefore the closing
inventory is valued at 50p per kg. This means that the whole of the price variance (2,500 kg × 10p =
£250) would be included in the February results. This variance is adverse as the price paid for the
material was higher than the standard.
If you selected £230 adverse then you had ignored the fact that the inventory is valued at standard
cost.
If you selected £230 favourable then you had ignored the fact that the inventory is valued at standard
cost and also misinterpreted the additional cost of the material to be a favourable variance.
26 Correct answer(s):
D Rise by £2,000
The first important consideration is to ignore the effect of the wage rise, because this did not arise
because of the decision to procure the superior quality material. The adverse labour rate variance
should therefore be discounted.
The favourable material usage variance arose because the superior material generated less waste.
However, the superior material was more expensive leading to the adverse material price variance,
and also could be converted by the workforce more efficiently, leading to the favourable labour
efficiency variance.
The answer is therefore 8,000F + 4,800F – 10,800A = 2,000F. A favourable cost variance means that
profits will rise.
If you selected a rise of £4,800 then you incorrectly ignored the labour efficiency and material price
variances.
If you selected a fall of £1,600 then you incorrectly also included the adverse labour rate variance of
£3,600.
If you selected a fall of £6,000 then you included the material price and usage variances but
incorrectly ignored the favourable labour efficiency variance.
SAMPLE EXAM
27 Correct answer(s):
D £160
The sales volume variance is defined as variance in sales volume × the budgeted unit contribution.
The volume variance is 100 units favourable.
The budgeted contribution was:
£16,000/10,000 = £1.60 per unit
The favourable sales volume variance is therefore £1.60 × 100 = £160
If you incorrectly calculated the sales volume variance as £180 then you used the actual contribution
per unit rather than the budgeted contribution per unit.
100 × £10.20 = £1,020 uses the standard selling price rather than contribution and
100 × £10.40 uses the actual selling price.
28 Correct answer(s):
D 135,000 hours
The labour efficiency variance (L) is defined as the variance in labour hours (V) × the standard rate
per hour (R), or
L=V×R
Or V = L/R
L = £10,000 (positive, as it is a favourable variance)
R = £2.00
Therefore V = £10,000/£2 = 5,000
The variance in labour hours is therefore 5,000 favourable meaning the actual hours taken were
5,000 lower than the standard. The actual hours were 130,000 therefore the standard hours were
130,000 + 5,000 = 135,000
29 Correct answer(s):
A Adverse
If sales prices were increased then market theory would predict a reduction in sales volumes as
potential purchasers switch to less expensive alternative products.
Correct answer(s):
E Favourable
If an advertising campaign were successful then it would encourage potential purchasers to try the
product and therefore an increase in sales volumes would be expected.
Correct answer(s):
I No impact
If labour pay rates increased then this would have no impact on sales volumes unless the increase in
costs were passed on by an increase in the sales price, which is not the case here.
30 Correct answer(s):
C Short-term bonus schemes
Short-term bonus schemes can put managers under pressure to avoid adverse variances. This may
lead them to produce budgets that are not genuine forecasts ie, incorporating budget slack, in order
to avoid adverse variances.
31 Correct answer(s):
D (1), (2) and (3)
There should be an equal chance of obtaining a favourable and adverse variance, so the fact that
they are all favourable might suggest that budgets and standards have been manipulated (eg,
budget slack).
Taking figures from the internet requires careful thought about its reliability.
The fact that some of the figures were manually entered, means that there is a possibility of human
error when inputting.
2 Correct answer(s):
A Total fixed costs/contribution per unit
B Contribution required to break even/contribution per unit
Breakeven point is the activity level at which there is neither a profit nor a loss. Alternatively, it is the
activity level at which total contribution equals fixed costs.
3 Correct answer(s):
B 3,000 units
Breakeven point = Fixed costs/Contribution per unit
= £30,000/(£15 – £5)
= 3,000 units
If you selected 2,000 units, you divided the fixed cost by the selling price, but remember that the
selling price also has to cover the variable cost.
The option of 4,000 units is the margin of safety, and if you selected 6,000 units you seem to have
divided the fixed cost by the variable cost per unit.
4 Correct answer(s):
A 20%
Breakeven point = Fixed costs/Contribution per unit
= £96,000/(£12 – £8)
= 24,000 units
Budgeted sales = 30,000 units
Margin of safety = 6,000 units
Expressed as a % of budget = 6,000/30,000 × 100% = 20%
If you selected 25%, you calculated the correct margin of safety in units, but you then expressed this
as a percentage of the breakeven point.
If you selected 73%, you divided the fixed cost by the selling price to determine the breakeven point,
but the selling price also has to cover the variable cost.
You should have been able to eliminate the option of 125%; the margin of safety expressed as a
percentage must always be less than 100%.
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 265
5 Correct answer(s):
B £100,000
Margin of safety = 20% × 5,000 units
= 1,000 units
Breakeven sales = Budget sales – Margin of safety
= (5,000 – 1,000) units
= 4,000 units
Breakeven sales volume = Total fixed costs/Contribution per unit
4,000 = Total fixed costs/£25
Total fixed costs = 4,000 × £25
= £100,000
If you selected £25,000 or £125,000, you calculated the monthly profit and contribution respectively,
rather than the fixed costs.
If you selected £150,000, you added the margin of safety to the budgeted sales to determine the
breakeven sales volume. If the margin of safety is positive, then the budgeted sales will always be
higher than breakeven sales.
6 Correct answer(s):
D 4,600 units
Sales units that will earn a required profit = (Fixed costs + Required profit)/Unit contribution =
(£11,125 + £11,875)/£5 = 4,600
If you selected 1,533 units, you divided the target contribution by the selling price, but the variable
costs must also be taken into account.
If you selected 2,225 units, you calculated the breakeven point.
If you selected 2,375 units, you divided the £11,875 target profit by the £5 contribution per unit. But
the fixed costs must be covered before any profit can be earned.
7 Correct answer(s):
D £196,000
Contribution ratio = 50% – 8%
= 42%
Sales required to earn target profit = (Fixed costs + Required profit)/Contribution ratio = (£23,520 +
£58,800)/0.42 = £196,000
If you selected £56,000, you calculated the breakeven point and did not allow for the target profit.
If you selected £140,000, you divided the £58,800 target profit by the contribution ratio, but the fixed
costs must be covered before any profit can be earned.
If you selected £164,640, you based your calculations on a contribution ratio of 50% and did not
allow for the other expenses which are 8% of sales.
8 Correct answer(s):
B 90,000
£
Total cost of 150,000 units (× £41.50) 6,225,000
Total cost of 100,000 units (× £47.50) 4,750,000
Variable cost of 50,000 units 1,475,000
Substituting £
Total cost of 100,000 units 4,750,000
Variable cost of 100,000 units (× £29.50) 2,950,000
Fixed costs 1,800,000
9 Correct answer(s):
A £330
Currently weekly contribution = 12% × £280,000 = £33,600
£
Extra contribution from 5% increase in sales = 5% × £33,600 1,680
Loss on product Z each week 3,000 × (1.90 – 2.20 – 0.15) (1,350)
Weekly increase in profit 330
If you selected £780, you forgot to allow for the variable cost of distributing the 3,000 units of Z.
If you selected £5,700, you made no allowances for the variable costs of either product Z or the extra
sales of other products.
The option of £12,650 is based on a 5% increase in revenue from the other products; however extra
variable costs will be incurred, therefore the gain will be a 5% increase in contribution.
10 Correct answer(s):
C 7,132
Current profit = Total contribution – Fixed costs
= (8,000 × £8) – £24,400
= £39,600
Required profit = £39,600
If the new production methods are implemented the required contribution will be:
Required contribution = Revised fixed costs + Required profit
= (£24,400 × 1.30) + £39,600
= £31,720 + £39,600
= £71,320
Required sales = Contribution required/Contribution per unit (revised)
= £71,320/(£15 – £5)
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 267
= 7,132 units
If you selected 3,960 units, you did not add the revised fixed costs to the required contribution
figure. The fixed costs must be covered before any profit can be earned.
If you selected 4,755 units, you divided the required contribution by the selling price, but this does
not take account of the need to cover the variable costs.
If you selected 8,915 units, you assumed that a £1 change in both the variable cost and the selling
price would leave the contribution per unit unaltered.
11 Correct answer(s):
B (1) and (3) only
Statement (1) is correct. The line which passes through the origin indicates the sales revenue at
various levels of activity. At an activity level of 10,000 units, the sales revenue is £100,000 therefore
the selling price is £10 per unit.
Statement (2) is incorrect. The sloping line which intercepts the vertical axis at £30,000 shows the
total cost at various levels of activity. The total cost for 10,000 units is £80,000, from which we
subtract the £30,000 fixed costs to derive the variable cost of 10,000 units, which is £50,000.
Therefore, the variable cost per unit is £5.
Statement (3) is correct. The fixed cost is the cost incurred at zero activity and is shown as a horizontal
line at £30,000.
Statement (4) is incorrect. The profit for 10,000 units is the difference between the sales value
(£100,000) and the total cost (£80,000) which amounts to £20,000.
SAMPLE EXAM
12 Correct answer(s):
B The sales revenue line passes through the origin.
C The total cost line cuts the vertical axis at the point which is equal to the period fixed costs.
Since sales revenue is zero when activity is zero the sales revenue line must pass through the origin.
When activity is zero the only cost incurred is the fixed cost. Therefore, the cost line cuts the vertical
axis at the point which is equal to the period fixed costs.
Statement A is incorrect because the fixed costs are depicted by a straight line parallel to the
horizontal axis.
Statement D is incorrect because the breakeven point is the point where the sales revenue line
crosses the total cost line.
13 Correct answer(s):
B Fixed costs in total are not changed by increases or decreases in production volume.
C Variable costs per unit are not changed by increases or decreases in production volume.
E Estimates of sales demand, prices and resources required for each product are known with
certainty.
Fixed costs in total are not changed by increases or decreases in production volume (so that the
profit-maximising and contribution-maximising output levels are the same).
Variable costs per unit are not changed by increases or decreases in production volume and
estimates of sales demand, prices and resources required for each product are known with certainty
(so that contribution per unit of scarce resource is constant).
14 Correct answer(s):
A Material only
Sales demand is not a limiting factor because there is not sufficient material to satisfy the demand of
6,000 units.
There is sufficient labour to satisfy the demand of 6,000 units.
15 Correct answer(s):
A B then A then T
This answer ranks the products by contribution per kg of material (the limiting factor).
B A T Total
Maximum sales (units) 1,000 1,200 1,500 N/A
Material kg needed 1,000 2,400 4,500 7,900
Labour hours needed 2,000 2,400 4,500 8,900
B A T
Contribution per unit (£) £50 £60 £55
Kg of material per unit 1 2 3
Contribution per kg of material (£) £50 £30 £18.33
Rank by contribution per kg of material 1 2 3
16 Correct answer(s):
C Contribution: £600,000, Profit: Insufficient information to calculate
To maximise contribution, we must produce the product with the greatest contribution per £ spent
on labour.
X Y Z
£ per unit £ per unit £ per unit
Contribution per unit 50 40 60
Labour cost per unit 30 10 5
Contribution per £ of labour 1.67 4 12
Ranking 3 2 1
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 269
17 Correct answer(s):
B £660
Product M Product Q
Contribution per labour hour = (£85/6) = (£110/8)
= £14.17 = £13.75
Priority ranking 1 2
Optimum allocation of hours 6,000 9,000
(1,000 units) (1,125 units)
18 Correct answer(s):
C £2,240
Since product N does not feature in the optimum planned production this product must rank last in
utilising the raw material (you could check this for yourself). The optimum production with the
additional 1,000 kg would therefore be as follows:
kg used Contribution
£
(1,000 – 720) units of M (× (£1.25/£0.50)) 700 (280 × £4.50) 1,260
100 units of N (× (£1.50/£0.50)) 300 (100 × £4.80) 480
1,000 1,740
19 Correct answer(s):
D Alpha: produce 4,000 units, purchase 0 units; Beta: produce 2,000 units, purchase 2,000 units
The units subcontracted should be those which add least to the costs of Green Ltd. The cheapest
policy is to subcontract work which adds the least extra cost per machine hour saved.
Alpha Beta
£ £
Variable cost of internal manufacture 20 36
It is cheaper to buy Betas than to buy Alphas. Therefore, the priority for making the components in-
house will be to allocate the available hours to the manufacture of Alphas.
Hours
Production Hours per unit allocated
Component Units
Alpha 4,000 3 12,000
Beta 2,000 2 4,000
16,000
The remaining 2,000 units of Beta should be purchased from the sub-contractor.
SAMPLE EXAM
20 Correct answer(s):
C Aura: produce 233 units, purchase 167 units; Venta: produce 400 units, purchase 0 units
The units subcontracted should be those which add least to the costs of Blue plc. The cheapest
policy is to subcontract work which adds the least extra cost per machine hour saved.
Aura Venta
£ £
Variable cost of internal manufacture 360 360
Variable cost of buying 390 400
Extra variable cost of buying 30 40
It is cheaper to buy Auras than to buy Ventas. Therefore, the priority for making the components in-
house will be to allocate the available hours to the manufacture of Ventas.
Hours
Component Production Hours per unit allocated
Units
Venta 400 20 8,000
Aura 233 30 7,000
15,000
The remaining 167 units of Aura should be purchased from the sub-contractor.
ICAEW 2022 10: Breakeven analysis and limiting factor analysis 271
21 Correct answer(s):
D X: 4,000 units; Y: 3,000 units; Z: 4,500 units
This question relates to limiting factor analysis. The key to these questions is ranking the contribution
per unit of the limiting factor, in this case Grunch. In this question the contribution per unit of Grunch
will be calculated pre-fixed costs, as these will be constant whatever production schedule is chosen.
Product X: Contribution = £1.50 and £1.50/0.3 = £5 contribution per kg of Grunch
Product Y: Contribution = £1.60 and £1.60/0.40 = £4 contribution per kg of Grunch
Product Z: Contribution = £2.40 and £2.40/0.80 = £3 contribution per kg of Grunch
The ranking of the products is therefore X, Y, Z.
The production schedule that will maximise profit will therefore be:
4,000 units of X (maximum demand), utilising 4,000 × 0.3 kg of Grunch, ie, 1,200kg
3,000 units of Y (maximum demand), utilising 3,000 × 0.4 kg of Grunch, ie, 1,200kg
This is a total of 2,400 kg and therefore 3,600 kg of the 6,000 kg will be available to manufacture
Product Z. This will produce 3,600/0.8 units = 4,500 units.
Any other production schedule will not maximise profit.
SAMPLE EXAM
22 Correct answer(s):
D 11,967 units
The first step is to calculate the profit achieved in 20X7. Contribution is £120 per unit and 12,000
units were produced and sold generating £120 × 12,000 = £1,440,000. Fixed costs were £20 ×
10,000 (per the budget) = £200,000 meaning the net profit was £1,240,000.
In 20X8 the unit selling price will be £200 × 1.05 = £210. Unit variable costs will be £80 × 1.1 = £88.
The unit contribution is therefore (£210 – £88) = £122. In 20X8 fixed costs will be £200,000 × 1.1 =
£220,000.
Profits in 20X8 are the same as 20X7, ie, £1,240,000, meaning the contribution must be £1,240,000 +
£220,000 = £1,460,000. The number of units sold to generate this contribution will be
£1,460,000/£122 = 11,967.
If you calculated the number of units as 12,000 then you probably incorrectly calculated the fixed
costs in 20X7 as £20 × 12,000 = £240,000 and the 20X7 profits as £1,200,000. This would mean that
you calculated the 20X8 fixed costs as £240,000 × 1.1 = £264,000 and therefore the required
contribution in 20X8 as £1,464,000. At a unit contribution of £122 this would mean 12,000 units.
If you calculated the number of units as 11,639 then you probably also incorrectly calculated the
fixed costs in 20X7 as £20 × 12,000 = £240,000 and the 20X7 profits as £1,200,000. However, in
20X8 you correctly calculated the fixed costs as 10,000 × £20 × 1.1 = £220,000 and therefore the
required contribution in 20X8 as £1,420,000. At a unit contribution of £122 this would mean 11,639
units.
Cumulative
Cash flow cash flow
£ £
Initial investment (46,000) (46,000)
Year 1 27,000 (19,000)
Year 2 34,000 15,000
2 Correct answer(s):
B DPP = 2.4 years; NPV = £2,323
If you selected an NPV of £3,013 you treated the £5,000 cash flow as occurring in Year 1 and
discounted it. Cash flows occurring ‘now’ should not be discounted.
3 Correct answer(s):
D £42,000
4 Correct answer(s):
A The graph of the NPV against the discount rate has a negative slope.
D An estimate of the IRR requires the calculation of the NPV at two different discount rates.
As the discount rate increases, the NPV decreases. If the discount rate is viewed as the cost of capital,
the NPV will fall as financing the project becomes more expensive.
The NPV falls as the discount rate increases and so a lower discount rate of s% will result in a higher
NPV.
The interpolation and graphical methods both approximate as linear the behaviour of the IRR as
discount rates increase and decrease. In fact, the behaviour is curvilinear. Neither can therefore give
exact answers.
By calculating the NPV at two different discount rates, the IRR can generally be estimated by linear
interpolation.
6 Correct answer(s):
D £7,500
Discount factors (DCF) of 24% are not shown on the tables therefore it is necessary to calculate the
factors yourself.
If you selected £38,500 you discounted the initial investment but since this occurs at the beginning
of the project it should not be discounted.
If you selected £(84,000) you discounted each year’s cash flow by the factor for cash flows in the
following year.
7 Correct answer(s):
B £9,500
NPV = –£400,000 + (£300,000)/1.15 + (£200,000)/(1.15 × 1.17)
= £9,500
If you selected £2,500 or £12,000 you discounted both years’ cash flows at 17% and 15%
respectively.
If you selected £32,000 you used a discount factor of (1/1.17) for the year 2 cash flow instead of
(1/(1.17 × 1.15)).
The Year 2 cash flow has to be discounted twice: one year at 17% and one year at 15%.
8 Correct answer(s):
D Statement (1) = False; Statement (2) = True
ARR places equal value on all cash flows throughout a project’s life. NPV places less value on later
cash flows. Therefore, Statement (1) is false.
The IRR is the rate that equates PV of inflows with the PV of the initial outflow(s). If the IRR is greater
than the cost of capital, later cash flows have been discounted too much. Therefore, Statement (2) is
true.
9 Correct answer(s):
D (1), (2) and (3)
The decision rule is to accept all investments with a positive NPV. Therefore (1) is correct.
10 Correct answer(s):
C It quantifies the effect of the timing of cash flows through the investment
Although the payback period does take some account of the timing of cash flows, it does not
quantify the effect of the timing of cash flows within the payback period. Furthermore, the method
ignores the cash flows that occur after the end of the payback period.
11 Correct answer(s):
A It is based on objective accounting profits
B The calculation method of ARR is universally agreed
Neither of these factors are advantages of the ARR method of investment appraisal.
Accounting profits are not objective. They are subject to a number of different accounting policies.
The calculation method of ARR can be based either on the initial investment or on the average
investment. The basis is not universally agreed and this can make it difficult for managers to interpret
calculated ARRs.
12 Correct answer(s):
C £183,000
We need to calculate the terminal value of the project.
This is the present value of the cash flows without any revenue from the contract. The minimum
acceptable contract price is the terminal value (TV) at the end of Year 2.
TV × 10% discount factor for Year 2 = PV
TV = £150,696/0.826
= £182,441
If you selected £151,000, you calculated the correct present value of the cash flows but did not allow
for the fact that the contract revenue was to be received at the end of Year 2.
13 Correct answer(s):
B Project I because it has the higher net present value
The NPV method is superior to all the other criteria for investment appraisal.
14 Correct answer(s):
A Statement (1) = True; Statement (2) = True
Consider the following three projects.
Ranking under:
Payback (2 years) 1 (4 years) 2 (–) 3
NPV at 10% (£117) 1 (–£41) 2 (–£73) 3
IRR (+35%) 1 (0%) 2 (–8%) 3
15 Correct answer(s):
D £13,690
Present value of investment to be made in one year = £50,000/1.12
= £44,643
Present value of perpetuity stream beginning in one year = a/r
= £7,000/0.12
= £58,333
NPV of investment = £58,333 – £44,643
= £13,690
If you selected £7,440, you made the common mistake of failing to appreciate that the £a/r formula
finds the present value of a perpetuity stream one year before the first cash flow.
16 Correct answer(s):
B 25%
Net initial investment = £(305,000 – 61,000)
= £244,000
The IRR is the interest rate at which the NPV of the investment is zero.
PV of perpetuity = £61,000/r
The IRR is where £61,000/r = £244,000
IRR = £61,000/£244,000 = 25%
If you selected 20% you divided £61,000 by £305,000. This fails to take account of the fact that the
first inflow is simultaneous with the initial investment.
If you selected 400%, you calculated the £244,000 net investment correctly, but your final calculation
was ‘upside-down’.
If you selected 500% you combined both of the errors above.
17 Correct answer(s):
A 10%
The IRR is the discount rate that results in a zero NPV in the following calculation.
18 Correct answer(s):
C 10% and 20%
Since there are only three cash flows the options can be tested by trial and error.
At 10%, (1,150 × 0.909) – (660 × 0.826) – 500 = 0.19
This is close to zero and probably eliminates the option of 13% but as a quick check:
At 13%, (1,150 × 0.885) – (660 × 0.783) – 500 = 0.97
This is not as close to zero therefore the option of 13% can be eliminated.
Since the cash flows are non-conventional there could be as many IRRs as there are sign changes, ie,
up to two IRRs. Therefore, a discount rate of 20% should also be checked.
At 20%, (1,150 × 0.833) – (660 × 0.694) – 500 = –0.09.
This is close to zero therefore the project has a second IRR of 20%.
If you selected 13%, you used the NPVs provided to calculate the IRR. This produces a less accurate
IRR than the trial and error process because it assumes that the NPV rises in linear fashion between
the two NPVs provided. It also fails to take account of the non-conventional cash flows and the
existence of two IRRs.
19 Correct answer(s):
D Zero, one or two
In general, it is possible for a project to have up to as many IRRs as there are sign changes in the cash
flows. Since the project’s cash flows have two sign changes there can be up to two IRRs.
The NPV profile could take various forms depending on the relative magnitudes of the cash flows, as
shown below.
NPV NPV
Zero IRRs One IRR
0 0
Discount rate, i
NPV NPV
One IRR if final
outflow is small Two IRRs
0 0
Discount rate, i
21 Correct answer(s):
C 6.25 years
The discounted payback period is calculated as follows:
Cumulative
Year Cashflow DCF Discounted cashflow discounted cashflow
£ £ £
0 (300,000) 1.000 (300,000) (300,000)
1–5 70,000 3.791 265,370 (34,630)
6 50,000 0.564 28,200 (6,430)
7 50,000 0.513 25,650 19,220
This means the discounted payback period is 6 + [£6,430/£25,650] years = 6.25 years
22 Correct answer(s):
A No change
A project’s IRR is the return at which the net present value (NPV) of the cash flows is zero. The IRR is
therefore independent of a company’s cost of capital. The revision to the cost of capital by the
project analyst will therefore not impact on the IRR, hence there is no change.
Correct answer(s):
E Increase
A project’s DPP is the period of time taken for the project’s cumulative discounted cash flows to turn
from the initial negative outflow to a cumulative positive position. The revision to the cost of capital
from 10% to 12% will reduce each future discounted cash inflow, and therefore increase the time
taken for the cumulative discounted cash flows to become positive.
SAMPLE EXAM
23 Correct answer(s):
D the initial cost of the investment outlay
24 Correct answer(s):
A The internal rate of return is always greater than the opportunity cost of capital.
As the net present value of the project’s cash flows is positive at the opportunity cost of capital, this
means that the project is viable and its IRR must be higher than the cost of capital.
If the internal rate of return of a project were sometimes lower than the opportunity cost of capital
then the net present value in those instances would be negative.
If the internal rate of return were always lower than the opportunity cost of capital then the net
present value would always be negative.
If the internal rate of return of a project were sometimes higher than the opportunity cost of capital
then this would imply that sometimes it would be lower.
SAMPLE EXAM
25 Correct answer(s):
B 8%
The best way to attempt this question is to draw graphs of the net present value of each project at
various discount rates. The IRR of each project tells us at what point the x-axis is crossed and the
number of changes in sign of the cash flows (from positive to negative or vice versa) tells us how
many changes in direction each graph will have. The starting sign (positive or negative) for the graph
can be easily established at a discount factor of 0% by adding the cash flows up.
The graphs of net present values for Projects X, Y and Z must look like this:
£ Project X
10% %
7% %
£ Project Z
5% 50%
The answer is 8% because at a discount factor of 8% the NPV of project X is positive (accepted),
project Y is also positive (accepted) and project Z is also positive (accepted).
Examining the other discount factors shows that:
At a discount factor of 12% the NPV of project X is negative (rejected), project Y is positive (accepted)
as is project Z.
At a discount factor of 6% the NPV of project X is positive (accepted), project Y is negative (rejected)
and project Z is positive (accepted).
At a discount factor of 4% the NPV of project X is positive (accepted), project Y is negative (rejected)
and project Z is also negative (rejected).
SAMPLE EXAM
26 Correct answer(s):
B 55%
The ARR in this question is defined as average annual profits divided by the average investment.
In Year 1 profits are –£2,000 less depreciation of (£60,000/10), ie, –£8,000
In Year 2 profits are £13,000 less depreciation of £6,000, ie, £7,000
In Year 3 profits are £20,000 less depreciation of £6,000, ie, £14,000
In Year 4 to 6 profits are £25,000 less depreciation of £6,000, ie, £19,000
In Year 7 to 10 profits are £30,000 less depreciation of £6,000, ie, £24,000
The average profits are therefore:
(–8,000 + 7,000 + 14,000 + (19,000 × 3) + (24,000 × 4))/10 = £166,000/10 = £16,600.
The investment in Year 1 is £60,000 and the investment in Year 10 is £nil. The average investment is
therefore (£60,000)/2 = £30,000.
The ARR is therefore £16,600/£30,000 = 55%
The average cash flow (rather than profit) = (16,600 + (60,000/10)) = £22,600
£22,600 ÷ £30,000 = 75%
£16,600 ÷ £60,000 = 28% ie, incorrect using the initial investment
27 Correct answer(s):
C £50,000
The cash flows for the project are:
T0 = –£200,000
T1 = +£20,000
T2 = +£25,000 and each year thereafter
The T0 outflow is not discounted.
The T1 inflow is discounted for one year at 8%, giving a NPV of £20,000/(1.08) = £18,519
Thereafter we have a perpetuity at a discount rate of 10% starting after one year. The perpetuity
factor is 1/0.1 = 10, and therefore the NPV is £25,000 × 10/1.08 = £231,481.
The NPV of the project is therefore (–£200,000 + £18,519 + £231,481) = £50,000
B incorrectly discounting the perpetuity back from T1 at 10% (rather than 8%) gives
£25,000 × 10/1.1 = £227,273 + £18,519 – £200,000
= £45,792 ie, £45,800
Discounting the perpetuity as (£25,000 × 10)/(1.1 × 1.08) = £210,438
+ £18,519 – £200,000 = £28,957 ie, £29,000
SAMPLE EXAM
28 Correct answer(s):
D £33,500
As the 10 annual inflows start immediately then in Year 0 the net outflow is actually –£150,000 +
£30,000 = –£120,000.
The NPV of this initial outflow is –£120,000.
The NPV of the nine remaining annual cash inflows (Years 1 to 9) of £30,000 each can be found from
the discount tables by taking the annuity factor for Years 1 to 9 at 10%. This is 5.759. Therefore, the
NPV of these cash inflows is £30,000 × 5.759 = £172,770.
The NPV of the outlay at the end of 10 years is –£50,000 × 0.386 = –£19,300.
The project NPV is therefore (–£120,000 + £172,770 – £19,300) = £33,470 or £33,500 to the nearest
£100.
If you incorrectly calculated the NPV as £15,100 (to the nearest £100) then you treated the 10 annual
inflows as being received in Years 1 to 10 rather than Years 0 to 9. This meant you calculated the NPV
as –£150,000 + £30,000 × 6.145 – £19,300 = £15,050.
If you incorrectly calculated the NPV as £31,600 (to the nearest £100) then you probably completed
every calculation correctly except the discounting of the final £50,000. You probably used a discount
factor of 0.424 rather than 0.386 meaning the NPV became £31,570 (£31,600 to the nearest £100).
SAMPLE EXAM
29 Correct answer(s):
D The average accounting rate of return is never less than zero.
Imagine there are no cash flows beyond Year 5 ie, outflow equals inflows exactly. The NPV at 20%
would be negative so A is ruled out. The IRR would be 0% so C is out. If cash flows occur beyond Year
5 there is no reason why the NPV could not be positive, so B is out.
31 Correct answer(s):
C Diagram C
Rate at which both NPVs are equal is between the IRRs and 15% (at which Y’s NPV is greater). Only C
shows this.
32 Correct answer(s):
D IRR = No change; Payback period = No change
Both the IRR and payback period do not involve the cost of capital in their calculation.
33 Correct answer(s):
B Statement (1) = True; Statement (2) = False
The project is normal ie, outflow and inflows which exceed the outflow, therefore it will have a single
IRR (statement (1) is true) and if the IRR is less than the cost of capital the NPV will be negative (think
about the normal NPV graph) so statement (2) is false.
34 Correct answer(s):
A IRR = Increase; Payback period = No change
As cash flows arise at the end of the year an increase in Year 3’s cash flow would not change the
three-year payback period. Higher cash flows require a greater discount rate to get a 0 NPV for the
IRR.
35 Correct answer(s):
B £(37,000)
NPV = (900,000 × 0.909) + 400,000 × 0.826 + 600,000 × 0.751 = (37,100)
If you got (41,000) you started the flows at t0 not t1. If you got positive NPVs you had your cash flow
signs reversed.
36 Correct answer(s):
B £95,800
1 January 20X3 is the same point in time as 31 December 20X2
75,000 × 1.08 = 81,000 at 31 December 20X1
85,000 × 1.08 = 91,800 at 31 December 20X2 plus 4,000 on that day = 95,800
£82,133 is the present value of the £95,800 terminal value.
1.1 Standard 1
Easy Opener 1
Dome 1
3
1.2 Fixed overhead absorption rate 3
3
1.3 Standard .5
Easy Opener .5
Dome .5
1.5
1.4 Standard revenue £414,000 1
Easy opener revenue £65,000 1
Dome revenue £112,500 1
Total marginal cost of sales (£233,500) 2
Total absorption cost of sales (£339,500) 2
Gross profit (£270,000) 1.5
Gross profit (£252,000) 1.5
10
1.5 Gross profit is exactly the same 2.5
2.5
Total 20
Dome £ 11,000
WORKINGS
(1) Standard
1,000 × (6 + 6 + 2)
(2) Easy Opener
1,000 × (2 + 2 + 1)
(3) Dome
1,000 × (5 + 4 + 2)
Dome: £ 8,000
The closing inventory value under marginal costing excludes the fixed overhead per unit. The
fixed overhead per unit therefore needs to be added onto the value under marginal to work
out the value under absorption costing.
Closing inventory under absorption costing = Closing inventory under marginal costing +
(number of units of closing inventory × overhead absorption rate per hour × number of labour
hours per unit)
WORKINGS
(1) Standard
19,500 + (6/10 × 15) × 1,500
(2) Easy Opener
3,000 + (2/10 × 15) × 500
(3) Dome
5,000 + (4/10 × 15) × 500
1.4 ** To work out the absorption cost of sales from the marginal cost of sales, we need to add the
fixed overheads for the period and the fixed overheads in the closing inventory units. Fixed
overheads for the period = £88,000. Fixed overheads in the closing inventory units = (1,500 ×
£15 × 6/10) + (500 × £15 × 2/10) + (500 × £15 × 4/10) = £18,000.
2 Kingsman Ltd
WORKINGS
(1) Sales
150 × 170
(2) Variable production costs
155 × (78 + 12 + 6)
(3) Fixed production costs absorbed
155 × 18
(4) Opening inventory
20 × (78 + 12 + 6 + 18) and 20 × (78 + 12 + 6)
(5) Closing inventory
25 × (78 + 12 + 6 + 18) and 25 × (78 + 12 + 6)
(6) Production cost of sales
Opg + prodn – clsg
(7) Under/over absorption
Absorbed overhead = 155 units × 18 = 2,790
Actual overhead = 1,200/6 × 18 = 3,600
2,790 – 3,600 = 810
(8) Variable selling, administration and distribution
2.50 × 150
(9) Fixed selling, administration and distribution
36,000/12 × 0.875
(10) Fixed production costs
1,200/6 × 18
3 Numan Ltd
3.3 £ 888
592/0.666667
5 × 48 × 0.9 + 3 × 16 + 3 × 6
4 Oaklea plc
WORKINGS
(1) Budgeted profit
400(600 – 310)
(2) Sales volume variance
(400 × 0.94 – 400)(600 – 280)
(3) Sales price variance
(620 – 600)400 × 0.94
(4) Materials price
(16,800/1,600 – 10)1,600
(5) Materials usage
(1,600 – 400 × 0.94 × 4)10
(6) Labour rate
(69,020/4,060 – 16)4,060
(7) Labour efficiency
(4,060 – 400 × 0.94 × 12)16
(8) Variable overhead expenditure
(17,255/4,060 – 4)4,060
(9) Variable overhead efficiency
(400 × 0.94 × 12 – 4,060)4
(10) Fixed overhead expenditure
13,050 – 400 × 30
(11) Actual profit
400 × 0.94 × 620 – 16,800 – 69,020 – 17,255 – 13,050
£
Sales revenue from 376 units should have been (× £600) 225,600
but was (376 × £620) 233,120
Sales price variance 7,520 (F)
£
1,600 kg should have cost (× £10) 16,000
but did cost 16,800
Material price variance 800 (A)
£
4,060 hours of work should have cost (× £16) 64,960
but did cost 69,020
Labour rate variance 4,060 (A)
£
4,060 hours of variable overhead should cost (× £4.00) 16,240
but did cost 17,255
Variable overhead expenditure variance 1,015 (A)
£
Budgeted fixed overhead (400 units × 12 hrs × £2.50) 12,000
Actual fixed overhead 13,050
Fixed overhead expenditure variance 1,050 (A)
Favourable Adverse
£ £ £
Budgeted profit 116,000
Sales volume variance 0 or – 7,680
Sales price variance 7,520 0 or –
Cost variances
Materials price 0 or – 800
Materials usage 0 or – 960
Labour rate 0 or – 4,060
Labour efficiency 7,232 0 or –
Variable overhead expenditure 0 or – 1,015
Variable overhead efficiency 1,808 0 or –
Fixed overhead expenditure 0 or – 1,050
Total variances 16,560 15,565 995
Actual profit 116,995
5 Basket Ltd
5.8 £26,000 1
Over-absorption 1
2
Total 20
5.2 £ 144
6 × 4 + 8 × 3 + 2 × 3 + £90*
*Hours worked relating to the Medium Hamper = 2,400 hours/3 = 800 hours
Fixed overhead cost per hour = £24,000/800 hours = £30 per hour
Fixed overhead cost per Medium Hamper = £30 × 3 = £90
5.3 £ 231
165 × 1.4
Fixed overhead cost relating to Large Hampers = (£85,000 – £24,000)/2 × 110% = £33,550
Fixed overhead cost per hour = £33,550/(800 hours × 78%) = £53.76 per hour
5.6 £ 105
84/0.8
6.1 £62,100 1
£56,250 1
£55,080 1
3
6.2 Percentage 3
3
6.3 £5,200 .5
£4,200 .5
£3,650 .5
1.5
6.4 Marginal sales revenue £144,000 1
Marginal sales revenue £159,000 1
Marginal sales revenue £133,000 1
Total marginal cost of sales (£226,750) 3
Total absorption cost of sales (£313,000) 2
Gross profit £127,950 1
Gross profit £123,000 1
10
6.5 Exactly the same 2.5
2.5
Total 20
PUH78: £ 56,250
YTF65: £ 55,080
WORKINGS
(1) AVX12
3,000 × 0.9 × (15 + 6 + 2)
(2) PUH78
2,500 × 0.9 × (14 + 8 + 3)
(3) YTF65
1,800 × 0.9 × (21 + 9 + 4)
6.2 Fixed overhead absorption rate = 148 (or 147) % of labour cost
PUH78 £ 4,200
WORKINGS
(1) AVX12
7,000 – 200 × (6/12) × 18
(2) PUH78
6,000 – 150 × (8/12) × 18
(3) YTF65
5,000 – 100 × (9/12) × 18
6.4
WORKINGS
(1) AVX12
45 × 3,200
(2) PUH78
60 × 2,650
(3) YTF65
70 × 1,900
(4) Total marginal cost of sales
313,000 – 81,300 – 4,950 ie, remove fixed overheads from absorption cost of sales
(5) Total absorption cost of sales
3,200 × 35 + 2,650 × 40 + 1,900 × 50
(6) Gross profit
Marginal higher by the 4,950 fixed overhead in opening inventory
6.5 Assuming the same actual production data and costs in October as for September, the gross
profit in October was exactly the same under absorption and marginal costing .
WORKINGS
(1) High load
(250 – 25) × (150 + 36 + 20)
(2) Standard load
(400 – 30) × (125 + 36 + 18)
(3) Low load
(500 – 10) × (100 + 30 + 16)
WORKINGS
(1) High load
4,600 – 20 × (36/10) × 6
(2) Standard load
6,000 – 30 × (36/10) × 6
(3) Low load
800 – 5 × (30/10) × 6
7.4
WORKINGS
(1) High load
270 × 320
(2) Standard load
230 × 430
(3) Low load
195 × 605
(4) Total marginal cost of sales
256,400 – 31,000 – 1,170 ie, remove fixed overheads from absorption cost of sales
(5) Total absorption cost of sales
320 × 230 + 430 × 200 + 605 × 160
(6) Gross profit
Marginal higher by the 1,170 fixed overhead in opening inventory
8.1
Absorption Marginal
£ £ £ £
Sales 132,000 132,000
Variable production
costs 46,200 46,200
Fixed production costs
absorbed 16,800 0
Opening inventory 8,250 6,050
Closing inventory (5,250) (3,850)
Production cost of sales (66,000) (48,400)
Under/over absorption 426 0
Variable selling, admin
and distribution (3,080) (3,080)
WORKINGS
(1) Sales
440 × 300
(2) Variable production costs
420 × (4 × 15 + 2.5 × 16 + 10)
(3) Fixed production costs absorbed
420 × 192,000/4,800
(4) Opening inventory
55 × (4 × 15 + 2.5 × 16 + 10 + 192,000/ 4,800) and 55 × (4 × 15 + 2.5 × 16 + 10)
(5) Closing inventory
35 × (4 × 15 + 2.5 × 16 + 10 + 192,000/ 4,800) and (35 × 4 × 15 + 2.5 × 16 + 10)
(6) Production cost of sales
Opg + prodn – clsg
(7) Under/over absorption
16,374 – 420 × (192,000/4,800)
(8) Variable selling, administration and distribution
7 × 440
(9) Fixed selling, administration and distribution
27,000/3 × 1.12
8.3 £ 7
80/0.75 = 106.67
80 × 1.25 = 100
9 Flag Ltd
9.1
Absorption Marginal
£ £ £ £
Sales 147,525 147,525
Variable
production
costs 46,200 46,200
Fixed production
costs
absorbed 16,800 0
Opening
inventory 1,725 1,265
Closing
inventory (1,500) (1,100)
Production cost
of sales (63,225) (46,365)
Under/over
absorption (800) 0
Variable sales,
admin and
distribution
costs (12,645) (12,645)
WORKINGS
(1) Sales
4,215 × 35
(2) Variable production costs
4,200 × (3.5 + 6.5 + 1)
(3) Fixed production costs absorbed
4,200 × 4
(4) Opening inventory
115 × (3.5 + 6.5 + 1 + 4) and 115 × (3.5 + 6.5 + 1)
(5) Closing inventory
100 × (3.5 + 6.5 + 1 + 4) and 100 × (3.5 + 6.5 + 1)
(6) Production cost of sales
Opening + Production – Closing
(7) Under/over absorption
(4,200 – 4,400) × 4
(8) Variable sales, administration and distribution costs
4,215 × 3
(9) Fixed sales, administration and distribution costs
12,000 × 1.04
(10) Fixed production costs
4,400 × 4
There is opening inventory but no closing inventory so profits must be reduced by overhead
being released from inventory.
9.3 51 %
10 Hexabeast plc
Budgeted contribution 2
Favourable Adverse
£ £ £
Budgeted contribution 111,600
Sales volume variance 8,370 0
Sales price variance 0 12,900
Variable cost variances
Materials price 0 1,161
Materials usage 3,096 0
Labour rate 0 2,376
Labour efficiency 5,940 0
Variable overhead rate 0 1,800
Variable overhead efficiency 1,485 0
Total variable cost variances 18,891 18,237 654
Fixed overhead budgeted (100,000)
Fixed overhead expenditure
variance 1,235
Actual profit 13,489
WORKINGS
(1) Budgeted contribution
1,200 × (199.50 – 24 – 66 – 16.50)
(2) Sales volume variance
(1,290 – 1,200) × (199.50 – 24 – 66 – 16.50)
(3) Sales price variance
10 × 1,290
(4) Materials price
(29,025/((2 – 0.2) × 1,290) – 12) × (2 – 0.2) × 1,290
£
Sales revenue from 1,290 units should have been (× £199.50) 257,355
but was (1,290 × £189.50) 244,455
Sales price variance 12,900 (A)
£
2,322 kg should have cost (× £12) 27,864
but did cost 29,025
Material price variance 1,161 (A)
£
3,600 hours of work should have cost (× £22) 79,200
but did cost (× £22 × 1.03) 81,576
Labour rate variance 2,376 (A)
£
3,600 hours of variable overhead should cost (× £5.50) 19,800
but did cost 21,600
Variable overhead expenditure variance 1,800 (A)
£
Budgeted fixed overhead (£300,000/3) 100,000
Actual fixed overhead 98,765
Fixed overhead expenditure variance 1,235 (F)
WORKINGS
(1) Budgeted contribution
1,200 × (105 – 40 – 24 – 16)
(2) Sales volume variance
(1.1 × 1,200 – 1,200) × (105 – 40 – 24 – 16)
(3) Sales price variance
–5 × 1,200 × 1.1
(4) Skilled labour rate
(2,200 adv – fav eff var below of 800) = –3,000
(5) Skilled labour efficiency
(1,200 × 1.1 × 4 – 5,200) × 10
(6) Materials price
(2,200 adv – fav usage var below of 1,080) = –3,280
(7) Materials usage
(1,200 × 1.1 × 4 – 5,100) × 6
(8) Variable overhead rate
(23,400/5,200 – 4) × 5,200
(9) Variable overhead efficiency
(5,200 – 1,200 × 1.1 × 4) × 4
(10) Budgeted fixed overheads
72,000/12
(11) Fixed overhead expenditure variance
5,500 – 6,000
(12) Actual profit
1,200 × 1.1 × (105 – 5) – (1,200 × 1.1 × 40 + 2,200) – (1,200 × 1.1 × 24 + 2,200) – 5,500 – 23,400
£
Sales revenue from 1,320 units should have been (× £105) 138,600
but was (1,320 × £100) 132,000
Sales price variance 6,600 (A)
Labour variances
The information in the question allows us to calculate the labour efficiency variance:
Labour efficiency variance
We are given the total variance in the question and now we know the efficiency variance. We can
calculate the rate variance because efficiency + rate = total variance.
Total variance = £800 (F) + price = £2,200 (A)
Rate variance = £2,200 (A) + £800 = £3,000 (A)
Material variances
The information in the question allows us to calculate the materials usage variance:
Materials usage variance
We are given the total variance in the question and now we know the usage variance. We can
calculate the price variance because usage + price = total variance.
Total variance = £1,080 (F) + price = £2,200 (A)
Price variance = £2,200 (A) + £1,080 = £3,280 (A)
Variable overhead expenditure variance
£
Budgeted fixed overhead (£72,000 / 12) 6,000
Actual fixed overhead 5,500
Fixed overhead expenditure variance 500 (F)
Favourable Adverse
£ £ £
Budgeted contribution 30,000
Sales volume variance 3,000 –
Sales price variance – 6,600
Variable cost variances
Skilled labour rate – 3,000
Skilled labour efficiency 800 –
Materials price – 3,280
Materials usage 1,080 –
Variable overhead rate – 2,600
Variable overhead efficiency 320 –
Total variances 5,200 15,480 –10,280
Budgeted fixed overheads –6,000
Fixed overhead expenditure
variance 500
Actual profit 14,220
12.1 2 × 8 + 2 × 2
£20
12.2 £ 37
12.3 £ 55
44 × 1.25
40/0.85
13 Kaytering plc
13.3 If the three additional items are allowed for in the appraisal of the take-away meals proposal,
they alone would result in an additional profit of £ 1,878 or 1,877 per week.
13.4 £ 30,790
Take away meal: 1,100 take away meals × 7 mins = 7,700 mins
Leaving (450 × 60 mins) – 7,700 mins = 19,300 mins available for restaurant meals
19,300 mins/18 mins = 1,072 restaurant meals
Total contribution = (1,072 × £20) + (1,100 × £8.50) = £30,790
13.6 £ 68,000
13.7 (£3,500)
13.8 18 %
13.9 11 or 12 %
14 Baybee plc
14.1 £ 620,250
14.2 Production units = sales units + closing inventory units – opening inventory units
Basic production = 220 + 60 – 50 = 230
Basic Deluxe
Production (units) 230 37
£
Materials £8 × 17 metres × 310 units = 42,160
Labour 75% × 310 units × 14 hours × £22 = 71,610
Labour overtime 25% × 310 units × 14 hours × £22 × 1.4 = 33,418
Total 147,188
14.4 Budgeted total fixed overheads for the Standard for February: £ 99,820
310 × 14 × 23
14.6
WORKINGS
(1) Cash sales
Cash sales are 25% of total sales.
(4) Labour
50% paid in production month (ie, month before sale) and 50% paid for in month of sale.
15 McCarthy plc
2
15.4 Number of units 3
3
15.5 Payback 1.5
1.5
15.6 IRR 2.5
2.5
15.7 ARR 3
3
15.8 NPV 2
2
Total 20
We know from the optimum planned production given in the question that we need 15,000
units of X and 4,000 more units of Y in order to fulfil demand.
Product Y is ranked more highly than product X so we want to use the available 20,000 on
Product Y first.
Product Y: 4,000 units ×× 3 kg = 12,000 kg
Leaving 20,000 kg – 12,000 kg = 8,000 kg available for Product X.
8,000 kg/4 kg = 2,000 units of Product X.
15.6 IRR: 18 %
10%
–800 + 280 × 2.487 + 360 × 0.683 = 142,240
20%
–800 + 280 × 2.106 + 360 × 0.482 = (36,800)
15.7 ARR: 18 %
Avg profit:
120 + 130 + 140 + 110/4 = 125
125/680 = 18.38
–680
+260 × 0.870
+270 × 0.756
+280 × 0.658
+(250 + 120) × 0.572 = 146,200
WORKINGS
(1) Cash sales
Cash sales are 30% of total sales
17 Treeze Ltd
17.2 £ 33
Barc Leaffe
Variable cost of making £15.00 £20.00
Variable cost of buying £17.00 £23.00
Extra variable cost of buying £2.00 £3.00
Labour hours saved by buying 0.25 0.40
Extra variable cost of buying per hour saved £8.00 £7.50
Priority for making in-house 1 2
17.5 2 years
Cumulative cash
Year Cash flow flow
£
0 (250,000) (250,000)
1 110,000 (140,000)
2 130,000 (10,000)
3 110,000 10,000/110,000 = 0.09
Payback = 2.09 years
17.6 19 %
Year Profit
£
1 52,500
2 72,500
3 52,500
17.7 £ 100,000
If the scrap value of £20,000 is incorrectly missed off in year 4, the NPV will be £87,790, ie,
£90,000 to the nearest £10,000.
17.8 £ 120,000
PV of net cash inflows of alternative machine = revised NPV of original machine plus initial
outlay of alternative machine = £67,840 + £274,800 = £342,640
Annuity for four years to obtain a PV of £342,640 = £342,640/2.855 = £120,014 (= cash inflow)
WORKINGS
(1) Cash sales
£
Oct 900 × 20% × £30 = 5,400
Nov 700 × 20% × £30 = 4,200
£
(800 × 80%) – 20 × £30 ×
Sep sales rec’d Oct 98%= 18,228
Oct sales rec’d Nov 900 × 80% × £30 × 98% = 21,168
Nov sales rec’d Dec 700 × 80% × £30 × 98% = 16,464
£
Oct 900 × £8 = 7,200
Nov 700 × £8 = 5,600
Dec 600 × £8 = 4,800
£
Nov sales produced in Oct 700 × £5 = 3,500
Dec sales produced in Nov 600 × £5 = 3,000
Jan sales produced in Dec 1,000 × £5 = 5,000
£
Oct 900 × £4 = 3,600
Nov 700 × £4 = 2,800
Dec 600 × £4 = 2,400
£
Oct 800 × £3 = 2,400
Nov 900 × £3 = 2,700
Dec 700 × £3 = 2,100
2 Correct answer(s):
A a selling and distribution cost
As the deliveries will only occur when a sale has been made it is therefore a selling and distribution
cost.
Prime cost is the name given to the total of all the direct production costs, not a cost incurred when
distributing goods after they have been sold.
Production overheads are the costs incurred in making goods which cannot be identified directly to
the goods made by the company, not a cost incurred when distributing goods after they have been
sold.
A direct production expense is incorrect. These are the expenses other than materials and labour
costs which are incurred in full as a direct consequence of making the product, not a cost incurred
when distributing goods after they have been sold.
3 Correct answer(s):
A £1,500
The fixed costs are those costs that remain unchanged irrespective of activity levels. The information
given in the question regarding the activity levels is therefore irrelevant.
£4,800 is incorrect. You have calculated the total costs incurred at the given activity level, not the
fixed costs.
£3,500 is incorrect. The fixed costs are those costs which are unaffected by changes in activity levels,
which could be calculated by considering the total costs if both production and sales levels were 0.
£3,300 is incorrect. You have calculated the total variable cost incurred at the given activity level, not
the fixed costs.
4 Correct answer(s):
A £3,150
Units Value
£
Opening inventory 600 3,600
Week 6 400 3,200
Week 8 100 900
1,100 7,700
6 Correct answer(s):
A When target costing is used, the selling price of a product or service determines its target cost.
B An activity-based costing (ABC) system makes some use of volume-related cost drivers.
The target cost is derived by deducting the required profit margin from the selling price.
An ABC system uses volume-related cost drivers such as machine hours as well as transaction related
cost drivers such as the number of quality control checks.
A JIT system tends to reduce storage costs because lower inventories are held, not increase them.
Life cycle costing does track costs that are incurred once production has ceased, since it tracks costs
over the whole of a product’s life cycle.
A product’s target cost is derived from a selling price which is determined by a consideration of
external market conditions.
7 Correct answer(s):
D £2,400
Idle time is 10% of the hours to be paid for. Hours to be paid for are therefore:
= 270/0.9 = 300 hours
Therefore, labour cost = 300 hours × £8 = £2,400
The answer of 300 is the number of hours to be paid for. This needs to be evaluated at the hourly
rate of £8.
If you selected £2,160, you made no allowance for the extra payment for idle time.
The answer of £2,376 is derived by simply adding 10% to the active hours. However, the idle time is
calculated as a percentage of the total hours paid for, not as a percentage of the active hours
worked.
8 Correct answer(s):
D £505
£
Direct materials (5 × £20) 100
Direct labour (14 × £8) 112
Variable overhead (14 × £3) 42
Fixed overhead (14 × £5*) 70
Other overhead (fixed per job) 80
Total cost of job 173 404
*Fixed production overhead absorption rate = £200,000/40,000 = £5 per direct labour hour
£404 is the total cost, but a profit margin should be added to this to determine the selling price. If
you selected £424, you added only £5 for fixed production overhead but this is the hourly rate,
which must be multiplied by the number of direct labour hours. If you selected £485, you calculated
20% of cost to determine the profit but the data states that profit is calculated as 20% of the sales
value.
9 Correct answer(s):
C £163.79
£ per unit
Material 15.00
Labour 52.05
Production overhead (£9.44 × 7 hours) 66.08
Total production cost 133.13
General overhead (£133.13 × 8%) 10.65
Total cost 143.78
Required return from the Super per unit (£136,200 × 0.14)/953 20.01
Required selling price 163.79
If you selected £102.62, you included only £9.44 for production overhead. This hourly rate should
have been multiplied by the number of machine hours to determine the total overhead absorbed.
If you selected £153.14, you forgot to include general overhead when you calculated the total cost.
If you selected £163.91, you added a mark up of 14% to the total cost, instead of determining a profit
per unit based on the 14% required return on the capital invested.
10 Correct answer(s):
A Division A: £900 profit; Division B: £360 profit
Division A Division B
£ £ £
External sales (180 × £14) 2,520 (90 × £20) 1,800
Transfer sales (90 × £(10 +
20%) 1,080
3,600 1,800
Transfer costs 1,080
Own costs (270 × 10) (2,700) (90 × £4) 360
(1,440)
Profit 900 360
If you calculated a £720 profit for division B, you forgot to include the division’s own costs in the
calculation.
11 Correct answer(s):
B A framework-based approach
The ICAEW Code of Ethics is a framework or ethics-based approach, which is the opposite of the
compliance, rule or tick-box approach seen in other jurisdictions such as the US.
12 Correct answer(s):
C The trend is 240 and the seasonal variation is +30.
1 240
3 210
4 250
TS = T + SV
SV = TS – T = 270 – 240 = 30
13 Correct answer(s):
A (1) and (2) are correct
Sources of big data (such as customers’ conversations in social media about different products or
services) can provide businesses with a better understanding of customer behaviour and customer
needs. In turn, this can help businesses to develop products and services which meet customers’
needs more effectively. Therefore statement (1) is correct.
Statement (2) is correct. One of the current problems with big data is that there is a lack of skilled
data analysts in the labour market.
14 Correct answer(s):
B A manager’s advertising budget is disproportionately large in comparison with the budgeted
revenue to be generated.
As long as the advertising budget is a realistic plan of the expenditure necessary to achieve the
company’s objectives, the disproportionate amount of expenditure is not an example of budget bias.
The manager might perhaps be responsible for a new product or service and the company is
budgeting to spend heavily on advertising to increase consumer awareness.
The other three examples are all incidences of budget bias, ie, the manipulation of budgetary plans
in a way which distorts the planning and control process.
15 Correct answer(s):
16 Correct answer(s):
D 16%
Imputed interest is £1,280,000 – £480,000 = £800,000. With interest at 10%, capital must be £8
million. ROI = £1,280,000/£8,000,000 = 16%.
If you got 6% you did RI/capital. If you got 10% you did interest/capital. If you got 22% you did profit
+ RI/capital.
17 Correct answer(s):
B K, L and M only
Current profit = 0.2 × £1.2m = £240,000
Current plus K (highest ROI > 20%) ROI = (240 + 100)/(1,200 + 300) = 22.66%
Current plus K plus L (ROI > 22.66%) ROI = (240 + 100 + 210)/(1,200 + 300 + 700) = 25%
Current plus K, L, M (ROI > 25%) ROI = (240 + 100 + 210 + 130)/(1,200 + 300 + 700 + 500) = 25.2%,
so do not add N as ROI < 25.2%
18 Correct answer(s):
B 11,160 kg
Total standard cost of 11,280 kg = £46,248
Standard cost per kg = £46,248/11,280 = £4.10 per kg
Usage variance in kg = £492/4.10 = 120 kg
11,280 kg were used. There was an adverse usage variance of 120 kg and so (11,280 – 120) kg =
11,160 should have been used.
If you selected 10,788 kg, you deducted the money value of the usage variance from the actual
quantity used. You were correct to deduct the variance, but you should first have converted it to a
quantity of material.
11,280 kg is the actual material used, which cannot be the same as standard because there is a
usage variance.
If you selected 11,400 kg, you added the usage variance to the actual usage, instead of subtracting
it. The variance is adverse, therefore standard usage must be lower than actual usage.
19 Correct answer(s):
B £1,130 favourable
£
13,450 hours should have cost (× £8.40) 112,980
But did cost 111,850
Direct labour rate variance 1,130 (F)
If you selected £415.80 (A), you valued the labour efficiency in hours at the actual rate instead of the
standard rate.
If you selected £420 (F), you calculated the correct money value of the variance but you
misinterpreted its direction.
The option of £710 favourable is the direct labour total variance.
20 Correct answer(s):
D Sales price variance = £1,800 favourable; Sales volume variance = £900 adverse
If you calculated a sales price variance of £2,000 favourable you simply calculated the extra sales
revenue that would have been achieved if the budgeted sales volume had been sold at the higher
price. Variances must be based on a flexed budget for the actual volume achieved.
21 Correct answer(s):
C Omitted variable
It has been assumed that the adverse labour efficiency variance was the fault of the production
manager’s team. However, it could be that the cheaper materials purchased in June were of a lower
quality than usual, and this made them more difficult to work with, leading to rejected products. The
bias is therefore related to incorrect causality ie, omitted variable bias.
22 Correct answer(s):
B (1) and (2) only
Data can be accessed from anywhere with an internet connection. This may exclude rural areas and
aeroplanes.
Cloud accounting can help businesses to stay up to date with latest technological advances as
software updates are done automatically by the cloud accounting supplier.
Statement (3) is incorrect. One of the potential risks of cloud accounting is a security breach,
including data loss and theft and privacy issues.
23 Correct answer(s):
A Percentage of employment contracts sent out without errors
Options B, C and D relate to the speed of work, or the number of transactions completed, rather than
the accuracy of that completion. Only option A is concerned with making sure that the output is
accurate.
24 Correct answer(s):
A 2,000
Breakeven point = Fixed costs/Contribution ratio
= £76,800/0.40
= £192,000
Actual sales = £224,000
Margin of safety = £224,000 – £192,000
= £32,000
Margin of safety in units = £32,000/£16
= 2,000 units
If you selected 12,000 units you calculated the breakeven point in units, but forgot to take the next
step to calculate the margin of safety.
14,000 is the actual sales in units and 32,000 is the margin of safety in terms of sales value.
25 Correct answer(s):
C £300,000
Total fixed costs = £137,500 + £27,500
= £165,000
Contribution ratio = £275,000/£500,000
26 Correct answer(s):
B £5,700
We begin by calculating the contribution per unit of limiting factor.
Priority
ranking
Scratch = £6/2 = £3 per labour hour 1
Purr = £7/3 = £2.33 per labour hour 3
Buzz = £8/3 = £2.66 per labour hour 2
Hours Contribution
Production priorities 1st Scratch
(700 units × 2 hours) 1,400 (700 × £6) £4,200
2nd Buzz
(400 units × 3 hours) 1,200 (400 × £8) £3,200
2,600 7,400
Less fixed costs (1,700)
Maximum profit
achievable £5,700
If you selected £5,062, you allocated the available hours according to the contribution earned per
unit of product. However, this does not take account of the limiting factor.
If you selected £6,100, you allocated all the available hours to Scratch, the product which earns the
highest contribution per hour. However, the maximum demand for Scratch is 700 units. Once that
demand has been met the remainder of the available hours must be allocated to Buzz, the next
product in the priority ranking.
£13,000 is the profit earned from satisfying the maximum demand for each product, but there are
insufficient labour hours available to manufacture this volume of output.
27 Correct answer(s):
A X: 130 units; Y: 840 units; Z: 100 units
X Y Z
Unit contribution £82 £108 £100
Kg required per unit 2 kg 1 kg 3 kg
Contribution per kg £41 £108 £33.33
Ranking 2 1 3
If you decided not to produce any units of Z you took no account of the requirement to produce 100
units of Z.
If you decided not to produce any units of X you ranked the products on the basis of unit profit and
took no account of the contract.
If you decided to produce only one unit of X you ranked the products on the basis of contribution
per unit.
28 Correct answer(s):
C £4,561
Using cumulative present value tables:
We require the 15% factor for Years 3–7.
29 Correct answer(s):
A £111,700
Present value of replacement cost in five years’ time = £750,000 × 0.621
= £465,750
Annual investment required = £465,750/(1 + discount factor for four years at 10%)
= £465,750/(1 + 3.170)
= £111,691
If you selected £197,800, you did not take account of the fact that the first amount will be invested
immediately and thus should not be discounted.
30 Correct answer(s):
C IRR: No change; DPP: Increase
The IRR does not use the cost of capital in its calculation. If the cost of capital increases the present
value of inflows decreases and the DPP gets longer.
32 Correct answer(s):
C The NPV approach is superior if discount rates are expected to vary over the life of the project.
Variable discount rates can be incorporated easily into NPV calculations, but not into IRR calculations.
The methods only give the same accept or reject decision when the cash flows are conventional.
There may be several IRRs that decision makers must be aware of to avoid making the wrong
decision.
NPV is technically superior to IRR and easier to calculate. It is unlikely that the NPV and ARR will be
confused. However, the ARR can be confused with IRR because both measures are expressed in
percentage terms.
r n
1 1
r[1−
(1 + r)n ]
1% 1 0.990 0.990
2 0.980 1.970
3 0.971 2.941
4 0.961 3.902
5 0.951 4.853
6 0.942 5.795
7 0.933 6.728
8 0.923 7.652
9 0.914 8.566
10 0.905 9.471
5% 1 0.952 0.952
2 0.907 1.859
3 0.864 2.723
4 0.823 3.546
5 0.784 4.329
6 0.746 5.076
7 0.711 5.786
8 0.677 6.463
9 0.645 7.108
10 0.614 7.722
2 0.826 1.736
3 0.751 2.487
4 0.683 3.170
5 0.621 3.791
6 0.564 4.355
7 0.513 4.868
8 0.467 5.335
r n
1 1
r[1−
(1 + r)n ]
9 0.424 5.759
10 0.386 6.145
2 0.756 1.626
3 0.658 2.283
4 0.572 2.855
5 0.497 3.352
6 0.432 3.784
7 0.376 4.160
8 0.327 4.487
9 0.284 4.772
10 0.247 5.019
2 0.694 1.528
3 0.579 2.106
4 0.482 2.589
5 0.402 2.991
6 0.335 3.326
7 0.279 3.605
8 0.233 3.837
9 0.194 4.031
10 0.162 4.192
Exam format
The Mock Exam should consist of 33 questions in total. There will be 32 objective-test questions
(80% of the marks) which will be of three types:
• Multiple choice – select one from four options A, B, C or D (see Chapter 1 Q1)
• Multi-part multiple choice – select 1one from two or three options, for two or more question parts
(see Chapter 1 Q23)
• Multiple response – select two or three responses from four or more options (see Chapter 1 Q24).
20% of the marks are allocated in one scenario-based question. This will cover a single syllabus area,
either: costing and pricing; budgeting and forecasting; performance management; or management
decision making.
The exam is 1.5 hours long and at least 55 marks are required to pass this exam.
Total 100 33
The following matrix contains two sets of questions, selected from within this Question Bank.
Each one contains an appropriate balance of questions which form a ‘sample exam’ for you to
attempt. Note that the question topics listed here are only examples of the nature of questions which
may be included – the actual exam questions may be on different topics.
1 Ch 1; Q1 Ch 1; Q2
2 Ch 1; Q5 Ch 1; Q27
3 Ch 2; Q4 Ch 6; Q25
4 Ch 2; Q11 Ch 6; Q49
5 Ch 3; Q28 Ch 6; Q50
6 Ch 3; Q35 Ch 6; Q13
7 Ch 5; Q1 Ch 6; Q60
8 Ch 5; Q4 Ch 6; Q68
9 Ch 5; Q19 Ch 7; Q3
10 Ch 1; Q28 Ch 7; Q21
11 Ch 6, Q26 Ch 7; Q42
12 Ch 6; Q48 Ch 7; Q16
13 Ch 6; Q22 Ch 8; Q3
14 Ch 6; Q12 Ch 8; Q4
15 Ch 6; Q59 Ch 8; Q22
16 Ch 6; Q65 Ch 8; Q23
17 Ch 7; Q2 Ch 8; Q17
18 Ch 7; Q20 Ch 9; Q6
19 Ch 7; Q35 Ch 9; Q7
20 Ch 7; Q15 Ch 9; Q9
21 Ch 8; Q25 Ch 8; Q27
22 Ch 8; Q26 Ch 8; Q28
23 Ch 10; Q3 Ch 10; Q5
24 Ch 10; Q4 Ch 10; Q6
27 Ch 11; Q1 Ch 11; Q2
28 Ch 11; Q3 Ch 11; Q6
30 Ch 11; Q4 Ch 11; Q5