Professional Documents
Culture Documents
Parasound C1 C2 Manual Supplement
Parasound C1 C2 Manual Supplement
VIDEO 2 ANALOG
PLIIX MUSIC VOL: -10
These settings are made on the Dolby/DTS setup page of the Audio Setup menu.
Note: Pro Logic IIx operates with the same menu settings you already made for Pro Logic II.
NEW SURROUND MODES continued 3
THX Operation
Video 1
• THX Surround EX: This adds additional AUDIO
sounds behind your listening area with Signal Dolby D 3/2.1
specially encoded DVDs. The panel display is Input Optical 1
“THX SURR EX” on the C 2 and “THX Surr EX”
Mode Direct
VIDEO
on the C 1. More detailed information about Signal Composite/NTSC
THX Surround EX may be found on page 17. Input Composite 1
THX Surr EX -35dB
|------------------------------|-----------------|
DVD DOLBY D 3/2. 1
THX SURR EX VOL: -35
Note: THX Surround EX, THX Ultra2 Cinema and THX Games will engage only when
both of the following conditions are met:
• Back channel speakers must be selected in the Speaker setup, Size setup menu.
• The selected mode must be DIRECT.
Only THX Cinema will engage when
other modes are selected. Video 1
AUDIO
Signal Dolby D 2/0
If you press the THX button and “INCOMPATIBLE Input Coaxial 1
SOURCE” appears, it means the mode is not Mode Dolby PLIIx Music
DIRECT, you have not selected back speakers or VIDEO
the input signal is not compatible. Signal No Signal
Input AUTO 1
-35dB
Incompatible source
DVD DOLBY D 2.0
INCOMPATIBLE SOURCE
Mode table
The following table was prepared for the C 1 and C 2 by THX Ltd. It shows you the surround
modes and THX modes which are available for each source, whether you have a 5.1 channel,
6.1 channel, or 7.1 channel speaker setup.
KEY: FOOTNOTES:
Non-THX default (bold text) 1 Re-Equalization - Front speakers
THX default (italics text) 2 Re-Equalization - Back speakers
Other allowed modes (plain text) 3 Timbre-Match
SB = Back speakers 4 Adaptive Decorrelation
Lt Rt = L total R total (of down-mixed channels) 5 ASA- Adaptive Speaker Array processing
Analog: L or L+R Mono + THX Cinema 1 Mono + THX Cinema 1 Mono + THX Cinema 1
DTS 1/0
Analog: Lt Rt or Stereo Mono + THX Cinema 1 Mono + THX Cinema 1 Mono + THX Cinema 1
Digital: Lt Rt or Stereo
- PCM Stereo Stereo Stereo
- AC-3 2/0 Stereo + THX Cinema 1 Stereo + THX Cinema 1 Stereo + THX Cinema 1
- DTS 2/0 Pro Logic II Movie PLII not applicable PLII not applicable
PLIIx not applicable Pro Logic IIx Movie Pro Logic IIx Movie
Pro Logic Pro Logic (SB = no output) Pro Logic (SB = no output)
Pro Logic + THX Cinema 1,3,4 Pro Logic + THX Cinema Pro Logic + THX Cinema
(SB = no output) 1,3,4 (SB = no output) 1,3,4
AC-3 5.1, No EX Flag Dolby Digital 5.1 Dolby Digital 5.1 Dolby Digital 5.1
(SB = no output) (SB = no output)
(EX or non-EX encoded) Dolby Digital 5.1 + Dolby Digital 5.1 + THX Cinema Dolby Digital 5.1 + THX Cinema
THX Cinema 1,3,4 (SB = no output) 1,3,4 (SB = no output) 1,3,4
Dolby Digital +
THX Ultra2 Cinema 1,3,4,5
Dolby Digital +
THX MusicMode 3,4,5”
Dolby Digital +
THX Games Mode 3,5”
AC-3 5.1, EX-Flagged Dolby Digital 5.1 (Direct) Dolby Digital + Dolby EX Dolby Digital + Dolby EX
DTS 5.1 DTS 5.1 Direct DTS 5.1 Direct DTS 5.1
(SB = no output) (SB = no output)
(non-ES encoded) DTS 5.1 + THX Cinema 1,3,4 DTS 5.1 + THX Cinema DTS 5.1 + THX Cinema
(SB = no output) 1,3,4 (SB = no output) 1,3,4
DTS-ES Matrix 6.1 DTS 5.1 Direct DTS-ES Matrix + Direct (5.1) DTS-ES Matrix + Direct (5.1)
DTS 5.1 + THX Cinema 1,3,4 DTS-ES Matrix 6.1 DTS-ES Matrix 6.1
+ Matrix + Matrix
DTS-ES Discrete 6.1 DTS 5.1 DTS-ES Discrete 6.1 DTS-ES Discrete 6.1
DTS 5.1 + THX Cinema 1,3,4 DTS-ES Discrete 6.1 + DTS-ES Discrete 6.1 +
THX Cinema 1,2,3 THX Cinema 1,2,3
(5.1 channel) DTS 96/24 + THX Cinema 1,3,4DTS 96/24 + THX Cinema DTS 96/24 + THX Cinema
(5.1, SB = no output) 1,3,4 (SB = no output) 1,3,4
DTS 96/24 +
THX Ultra2 Cinema 1,3,4,5
DTS 96/24 +
THX MusicMode 3,4,5
DTS 96/24 +
THX Games Mode 3,5
KEY: FOOTNOTES:
Non-THX default (bold text) 1 Re-Equalization - Front speakers
THX default (italics text) 2 Re-Equalization - Back speakers
Other allowed modes (plain text) 3 Timbre-Match
SB = Back speakers 4 Adaptive Decorrelation
Lt Rt = L total R total (of down-mixed channels) 5 ASA- Adaptive Speaker Array processing
8 NEW CONTROLS
After the menu setup is concluded, any Bass or Treble adjustments you make while you’re lis-
tening will temporarily add to, or subtract from, their settings on the Audio setup page.
For example, if you had set Treble to +2dB in the Audio setup menu, then the first time you
press the remote’s + TRE key (on the C 1/C 2 page) it will increase to +3dB. Or the first time you
press the TRE – key on the remote it will reduce to +1dB.
NEW CONTROLS continued 9
What’s New
Higher Resolution
The original Bass and Treble tone controls were digitally processed with a 48 kHz sampling rate.
The Bass and Treble tone controls now operate
with a 96 kHz sampling rate to enable the highest
possible resolution. Higher resolution lets you make TONE CONTROLS
tonal adjustments without sacrificing overall quality BASS: 0DB
of sound and its ultimate detail and clarity.
Tone Frequency
The tone controls could previously boost or cut Tone controls
Bass and Treble in frequency ranges that were
fixed. Now you have a choice of three frequencies > Bass + 0dB
(technically known as “- 3 dB turnover points”) for Treble + 0dB
each tone control. Treble freq 6 kHz
With these tone frequency settings you can make Bass freq 80 Hz
more focused adjustments to optimize the way your
speakers and room work together. Exit
The upgraded tone control settings are found on
the setup Menu, Audio setup page, Tone controls
page, Bass Freq. and Treble Freq.
The Treble tone control now offers you a choice of three frequencies where the treble tone
control range is centered, 6 kHz, 8 kHz and 10 kHz.
- 6 kHz setting: The Treble tone control
will make the most noticeable increase or TONE CONTROLS
decrease in the high frequencies in your
TREBLE FREQ: 6KHZ
music and movies. This will affect how
penetrating the treble range sounds to you
because it includes treble frequencies in a
range which is more audible. It has a subtle
TONE CONTROLS
TREBLE FREQ: 8KHZ
effect on the upper part of the “presence”
range and increase at 6 kHz may improve the
intelligibility of dialogue.
- 8 kHz setting: The Treble tone control TONE CONTROLS
will have a less noticeable and more subtle TREBLE FREQ: 10KHZ
increase or decrease in the high frequencies
in your music and movies. You may prefer
this setting.
- 10 kHz setting: The Treble tone control will Tone controls
have the least impact on the perceived treble Bass + 0dB
of music or movies. You will probably hear Treble + 0dB
the effects of adjustments made at 10 kHz
more in terms of the “airiness” of a recording > Treble freq 10 kHz
than on its actual musical content. The 10 kHz Bass freq 80 Hz
setting is ideal for making older recordings
sound more spacious and detailed without Exit
changing their fundamental sonic balance. It
can also help reduce the ”edge” on poorly
made recordings which are overly “aggres-
sive” or have background hiss.
10 NEW CONTROLS continued
The upgraded Bass tone control offers you a choice of three frequencies where the bass tone
control range is centered, 80 Hz, 110 Hz and 140 Hz.
- 80 Hz setting: The Bass tone control will make the least noticeable impact on the low
frequencies in your music and movies.
Decreasing Bass at the 80 Hz setting can
compensate for room resonances that might Tone controls
exaggerate bass response and make it sound Bass + 0dB
too heavy. Increasing Bass at 80 Hz can Treble + 0dB
increase bass impact with the least added
“thickness” or unwelcome exaggeration. It Treble freq 6 kHz
has the least impact on mid-bass frequencies. > Bass freq 80 Hz
Exit
TONE CONTROLS
BASS FREQ: 80 HZ
Exit
TONE CONTROLS
BASS FREQ: 140 HZ
Conversely, decreasing Bass at the 140 Hz setting can reduce heavy bass “boominess”
that can occur when speaker placement, such as in a corner, gives too much of a boost
to low frequencies.
Note: All of these descriptions are generalizations. The effects of the new settings may be
quite different, depending on your speakers, your theater room, and where the speakers
are placed in it. We invite you to experiment with the Tone freq. settings.
TONE CONTROL RESPONSE CURVES 11
Lip Sync
The image you see on your screen and the sound
you hear must be properly synchronized. Since PRESET SETUP
matching the picture with the sound is most LIPSYNC: 25 MS
noticeable when actors are speaking, it is often
called Lip sync.
Video signals may be delayed when they are pro-
cessed within the DVD player, in an external line Preset setup
scalar, or in a High Definition TV. An example of Preset 1
such processing would be the de-interlacing that Treble + 0dB
converts a 480i (interlaced) signal to a 480p (pro- Bass + 0dB
gressive scan) signal, or converting a 480p signal Center + 0dB
into a 1080i signal. The result is that you will see Surround + 0dB
Subwoofer + 0dB
the picture a fraction of a second after you hear its > Lipsync 25 ms
corresponding sound. You can spot even a small
video delay when actors are speaking, and it can be
very annoying. Exit
Our Lip sync enables you to adjust and delay the
audio signals to synchronize the sound with the
delayed video signals. Adjustments are made in precise 1 mS (millisecond) steps, up to 150 mS.
You will find the Lip sync (shortened to Lipsync on the menu page) adjustment on the Audio
Setup menu page, Preset setup sub-menu page. The Lip Sync adjustment is made on the
Preset page so that you may “preset” five separate Lip Sync settings. Thus you can enjoy
precise correction for as many as five different source components. If you go to the Source
setup menu page you can associate a different Preset for sources (or assign the same preset
to more than one source).
Note: The factory setting for Lipsync is Off.
Bass Management
Review: The original bass management selects the
crossover frequency between the subwoofer and SIZE SETUP
other speakers (when they are set to “small”) in 10 SUB FREQ.: 45 HZ
Hz increments from 40 Hz to 140 Hz.
What’s New
The C 1 or C 2 second Zone will now be set up as if it was a sep-
arate device that can be selected on the MAIN MENU page. This
allows for discrete one button selection of second zone functions
at any time; it is different than the previous second zone function
described in the C 1 or C 2 Owner’s Guide.
First press the MAIN button; ZONE will appear in the device
display, along with C 1/C 2, T3 and the names of seven other
devices (which you can re-name and re-program for the compo-
nents you actually have in your theater).
Press the ZONE device key next, after which you must press
the ON button. This will activate the Zone function and will also
turn on the C 1 or C 2, but for its remote zone only. You will see
the page with the names of the ten source inputs that can be
selected for the second Zone.
When you are on the ZONE page, with the zone function on, the
remote handset’s VOL+ and VOL– buttons, MUTE button and
Source keys control these functions only in the second Zone,
without affecting the C 1 or C 2 main zone operation. If you press
the OFF button while ZONE is displayed, it will turn off the zone
function and turn off the C 1 or C 2 power if only the remote
zone was in use. It will not turn the off the C 1 or C 2 power if it
is playing in the main zone.
14 TECHNICALLY SPEAKING
Here is a Q&A about Pro Logic IIx, prepared by Dolby Labs and reprinted from the Dolby Labs
website, with permission.
2. Does Dolby Pro Logic IIx replace Dolby Pro Logic II?
No. Dolby Pro Logic IIx uses the same core technology as Dolby Pro Logic II, but extends its
functionality. Dolby Pro Logic II technology will continue as the primary surround decoder for
two to 5.1 channel material. Pro Logic IIx will be integrated by manufacturers into hardware
components that offer 6.1 or 7.1 output capability.
3. Why does Dolby Pro Logic IIx sound more natural than competing formats?
For a few reasons. One is the newly developed approach in steering logic design, which pro-
vides unprecedented smoothness and precise dynamics. Another is the lack of signal coloration
achieved by employing the simplest audio path, with as little filtering of the audio as possible.
4. What were the sonic goals in developing Dolby Pro Logic IIx?
• Improved surround envelopment
• Enhanced sense of spatial depth
• Improved directionality
• Larger listening area, commonly referred to as the “sweet spot”
• Compatibility of all native stereo and 5.1 channel content with 6.1 and 7.1 playback configurations
5. What are the key differences between Dolby Pro Logic IIx and other existing 6.1 channel
and 7.1 channel offerings?
• Dolby Pro Logic IIx is the only technology package that covers both 6.1 and 7.1 speaker
configurations.
• Dolby Pro Logic IIx maintains the sonic clarity of Dolby Pro Logic II across all sources and
output modes, ensuring unmatched aesthetic consistency and purity.
• Dolby Pro Logic IIx introduces no artificial coloration during playback. It remains true to the
artist’s intent.
7. Will manufacturers offer Dolby Pro Logic IIx in a 7.1 satellite/sub configuration?
Yes. With proper bass management executed within the surround controller, a 7.1 satellite /
subwoofer configuration — where all low frequencies are routed to the subwoofer —
is indeed possible.
TECHNICALLY SPEAKING continued 15
8. Will Dolby Pro Logic IIx process DTS 5.1 content, and is it compatible with DTS-ES discrete and
matrix-encoded software?
Processing of DTS content is an available option. While Dolby Pro Logic IIx technology is fully
compatible with DTS and DTS-ES, whether a product supports them is, of course, dependent
upon DSP capability and hardware design.
10. Is any front-channel information being mixed into the Rear speakers by Dolby Pro Logic IIx?
No.
11. What happens in signal processing behind the Center Width control?
When a logic decoder “steers” the Center signal, it is, in essence, removing Center channel sig-
nals from the Left and Right outputs. The Center Width control allows the amount of steering that
is applied to Center signals to be modified. It reduces the “hard Center channel” that sometimes
results from Center steering of stereo encoded soundtracks.
13. What are the differences between Music mode and Movie mode?
Surround programs are primarily mixed like movies. When shows are mixed in surround, they are
monitored through the surround decoder that will be used for playback in the cinema or home.
Movie mode is the reference decoder mode for any such surround-encoded program.
Music mode brings the benefits of a highly natural and balanced multichannel surround soundfield
to content that was not specifically encoded for surround playback.
17. Does Dolby have a preference for Rear and Back Surround speaker configurations?
Not necessarily, since different rooms often benefit from different solutions. However, direct
radiators often provide maximum clarity and detail and, therefore are often recommended.
18. Will you develop Dolby Pro Logic IIx matrix encoders for the entertainment industry?
Possibly. But it is worth noting that unlike Dolby Pro Logic II, which requires its own encoders to
achieve maximum benefit, Dolby Pro Logic IIx can be fully exploited using today’s encoding tools
and mixing consoles.
16 TECHNICALLY SPEAKING continued
19. What components are necessary to upgrade from Dolby Digital EX/Dolby Pro Logic II to Dolby
Pro Logic IIx?
Aside from an A/V processor equipped with the new Dolby Pro Logic IIx algorithm, you would
need an additional amplifier and an additional speaker matched to the existing back speaker for
full integration of Dolby Pro Logic IIx.
Most A/V receivers equipped with Dolby Pro Logic IIx, on the other hand, will include the addition-
al amplifier necessary to upgrade from 6.1 Dolby Digital EX to 7.1 channel Dolby Pro Logic IIx.
Re-Equalization
The tonal balance of a film soundtrack will be excessively bright and harsh when played back over
audio equipment in the home because film soundtracks were designed to be played back in large
movie theatres using very different professional equipment. Re-Equalization restores the correct
tonal balance for watching a movie soundtrack in a small home environment.
Timbre Matching
The human ear changes our perception of a sound depending on the direction from which the
sound is coming. In a movie theatre, there is an array of surround speakers so that the surround
information is all around you. In a home theatre, you use only two speakers located to the side
of your head. The Timbre Matching feature filters the information going to the surround
speakers so that they more closely match the tonal characteristics of the sound coming from
the front speakers. This ensures seamless panning between the front and surround speakers.
Adaptive Decorrelation
In a movie theatre, a large number of surround speakers help create an enveloping surround sound
experience, but in a home theatre there are usually only two speakers. This can make the surround
speakers sound like headphones that lack spaciousness and envelopment. The surround sounds will
also collapse into the closest speaker as you move away from the middle seating position. Adaptive
Decorrelation slightly changes one surround channel’s time and phase relationship with respect
to the other surround channel. This expands the listening position and creates — with only two
speakers — the same spacious surround experience as in a movie theatre.
TECHNICALLY SPEAKING continued 17
THX Ultra2
Before any home theatre component can be THX Ultra2 certified, it must incorporate all the
features above and also pass a rigorous series of quality and performance tests. Only then can
a product feature the THX Ultra2 logo, which is your guarantee that the Home Theatre products
you purchase will give you superb performance for many years to come. THX Ultra2 requirements
cover every aspect of the product including pre-amplifier performance and operation, and
hundreds of other parameters in both the digital and analog domain.
THX Surround EX
THX Surround EX — Dolby Digital Surround EX is a joint development of Dolby Laboratories and
the THX Ltd.
In a movie theater, film soundtracks that have been encoded with Dolby Digital Surround EX
technology are able to reproduce an extra channel which has been added during the mixing of the
program. This channel, called Surround Back, places sounds behind the listener in addition to the
currently available front left, front center, front right, surround right, surround left and subwoofer
channels. This additional channel provides the opportunity for more detailed imaging behind the
listener and brings more depth, spacious ambience and sound localization than ever before.
Movies that were created using the Dolby Digital Surround EX technology, when released into the
home consumer market may exhibit wording to that effect on the packaging. A list of movies
created using this technology can be found on the Dolby web site at www.dolby.com.
Only surround controller products bearing the THX Surround EX logo, when in the THX Surround
EX mode, faithfully reproduce this new technology in the home.
Bass Mixing
In the bass output setup menu page, you have the flexibility to choose how bass information is
distributed to your speakers only if you have large front left and right speakers and a subwoofer
as part of your home theatre speaker system.
By selecting Enhanced Bass or Ebass [as it is called on the Model 7100], you will send the bass fre-
quencies from the front left and right channels to the front left, right speakers AND the subwoofer.
When Ebass is not selected, bass frequencies from the front left and front right channels stay in the
front left and front right speakers and not sent to the subwoofer. Bass going to the subwoofer will
only come from the LFE channel and any of the channels with speakers that you have designated as
“Small.” This selection is preferred by THX. To decide which setting is best for your room, once you
have positioned all of your speakers, choose the option which gives you the most solid sounding bass.
THX Music
For the replay of multi-channel music the THX MusicMode should be selected. In this mode THX
ASA processing is applied to the surround channels of all 5.1 encoded music sources such as
DTS, Dolby Digital and DVD-Audio to provide a wide stable rear soundstage.
THX Games
For the replay of multi-channel game audio the THX Games Mode should be selected. In this
mode THX ASA processing is applied to the surround channels of all 5.1 channel encoded game
sources such as analog, PCM, DTS and Dolby Digital. This accurately places all game audio sur-
round information, providing a full 360 degree playback environment. THX Games Mode is unique
as it gives you a smooth transition of audio in all points of the surround field.
Dialogue Normalization
Dialogue Normalization (Dial Norm) is a feature of Dolby Digital, which is used to keep the pro-
grams at the same average listening level so the user does not have to change the volume con-
trol between Dolby Digital programs.
When playing back software which has been encoded in Dolby Digital, sometimes you may see
a brief message in the front panel display which will read “Dial Norm X dB” (X being a numeric
value). The display is showing how the program level relates with THX calibration level. If you
want to play the program at calibrated theatrical levels, you may wish to adjust the volume. For
example, if you see the following message: “Dial Norm + 4 dB” in the front panel display, to
keep the overall output level at THX calibrated loudness, just turn down the volume control by 4
dB. However, unlike a movie theater where the playback loudness is preset, you can choose your
preferred volume setting for best enjoyment.
Licensing Acknowledgments
Manufactured under license from Dolby Laboratories. ”Dolby,“ ”Pro Logic,“ and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS”, “DTS-ES Extended Surround” and Neo:6” are trademarks of Digital Theater Systems,
Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights Reserved.
Manufactured under license from THX, Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Ultra2 and THX are trademarks or registered trademarks of THX Ltd. Surround EX is a
trademark of Dolby Laboratories, Inc. Used under authorization.
THX and Ultra2 are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved.
We invite you to visit www.parasound.com for the most up-to-date information
on your unit and to find out about other Parasound products. Learn why
Parasound has been a quality and value favorite of magazine reviewers, sound