Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PRODUCT DATA SHEET

Sika® Antisol®-90
SYNTHETIC RESIN BASED, SOLVENT CONTAINING CONCRETE CURING COMPOUND

DESCRIPTION CHARACTERISTICS / ADVANTAGES


Sika® Antisol®-90 is a resin based, solvent containing li- ▪ 90% efficiency index
quid curing compound for the prevention of prema- ▪ Application by hand or power-driven equipment -
ture water loss in concrete. saves time, labour and money
Suitable for use in hot and tropical climatic conditions. ▪ Effective in all conditions of humidity and temperat-
ure
USES ▪ Single application, no further attention is required
▪ The finish and colour of concrete are not affected
Sika® Antisol®-90 is applied to fresh concrete surfaces once the compound has disintegrated under the in-
to form a fast drying, thin, flexible and tough impervi- fluence of ultra violet light or abrasion
ous membrane which protects the concrete from rap- Sika® Antisol®-90 provides the following beneficial
id water evaporation during initial curing stages, properties to concrete surfaces:
thereby assisting towards obtaining maximum ▪ Reduces incidence of plastic cracking
strength, durability and helping towards the elimina- ▪ Ensures achievement of desired strengths
tion of shrinkage cracks and surface dusting. ▪ Alleviates other costly methods such as hessian-wa-
Sika® Antisol®-90 is particularly useful in large areas of tering, etc.
exposed concrete such as: ▪ Reduces dusting
▪ Highways, runways and taxiways ▪ Minimises shrinkage
▪ Aprons and hardstandings
▪ Roof decks APPROVALS / CERTIFICATES
▪ Retaining walls
▪ Pre-stressed beams and piers Sika® Antisol®-90 follows the requirements of ASTM C
▪ Bridge decks, etc 309; Type 1; Class B

PRODUCT INFORMATION
Packaging 200 L drum
Appearance / Colour Yellowish to light brown liquid
Shelf life 12 months from the date of production if stored properly
Storage conditions Store properly in original, unopened and undamaged sealed packaging in
dry conditions at temperatures between +5 °C and +45 °C. Protect from dir-
ect sunlight and frost.
Density ~0.87 kg/l (+25 °C)

Product Data Sheet


Sika® Antisol®-90
April 2019, Version 01.01
021405031000000040

1/2
APPLICATION INFORMATION
Yield Sika® Antisol®-90 is applied at a rate of between 5.3–5.7 m² per litre, de-
pending on wind, humidity and temperature.

APPLICATION INSTRUCTIONS ECOLOGY, HEALTH AND SAFETY


APPLICATION For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
Sika® Antisol®-90 is supplied ready to use and should to the most recent Safety Data Sheet (SDS) containing
not be diluted with any forms of solvent. Stir well be- physical, ecological, toxicological and other safety-re-
fore use. Sika® Antisol®-90 is applied in a thin even lated data.
coat, using spray equipment, onto the fresh concrete
immediately after the free surface water has evapor- LEGAL NOTES
ated. After application of Antisol®-90, the area must
be protected from rain for at least 3 hours. The information, and, in particular, the recommenda-
Drying time is ~30 minutes (at +30 °C to +35 °C) tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
IMPORTANT CONSIDERATIONS rent knowledge and experience of the products when
properly stored, handled and applied under normal
▪ Regular cleaning of spray equipment, especially the conditions in accordance with Sika's recommenda-
nozzle is recommended tions. In practice, the differences in materials, sub-
▪ Sika® Antisol®-90 should only be used on surfaces ex- strates and actual site conditions are such that no war-
posed to normal weathering which will cause the ranty in respect of merchantability or of fitness for a
eventual disintegration of the membrane particular purpose, nor any liability arising out of any
▪ Disintegration of the membrane will depend on many legal relationship whatsoever, can be inferred either
factors such as consumption rate, UV exposure, sur- from this information, or from any written recom-
face absorption, etc. As a guide, this process will take mendations, or from any other advice offered. The
approximately 5 weeks user of the product must test the product’s suitability
▪ Where subsequent surface treatment is to be under- for the intended application and purpose. Sika re-
taken before total disintegration of the membrane, serves the right to change the properties of its
the Antisol film must be removed products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
BASIS OF PRODUCT DATA current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
All technical data stated in this Data Sheet are based Sheet for the product concerned, copies of which will
on laboratory tests. Actual measured data may vary be supplied on request.
due to circumstances beyond our control.

LOCAL RESTRICTIONS
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
uses.

SIKA NORTHERN GULF SIKA SOUTHERN GULF SIKA SAUDI ARABIA


Bahrain / Qatar / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel: +966 11 217 6532
[email protected] [email protected] [email protected]
gcc.sika.com gcc.sika.com gcc.sika.com

SikaAntisol-90-en-AE-(04-2019)-1-1.pdf

Product Data Sheet


Sika® Antisol®-90
April 2019, Version 01.01
021405031000000040

2/2

You might also like