Ford F 150 2005 Timing Drive Components Workshop Manual
Ford F 150 2005 Timing Drive Components Workshop Manual
Special Tool(s)
Compressor, Valve Spring
303-1039
Material
Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil WSS-M2C930-
XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor A
Oil CXO-5W20-LSP12) or equivalent
Hydraulic Chain Tensioner Retaining Clip —
1L3Z-6P250-AA
Removal
1. Remove the engine front cover. For additional information, refer to Engine Front Cover in this section.
4. NOTE: If the camshaft lobes are not exactly positioned as shown, the crankshaft will require one full additional rotation to 12 o'clock.
The No. 1 cylinder camshaft exhaust lobe must be coming up on the exhaust stroke. Verify by noting the position of the 2 intake camshaft lobes and the exhaust lobe on the No. 1
cylinder.
This is the cut pages sample. Download all 12 page(s) at: ManualPlace.com
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS52/~M... 4/12/2011