Group 15 NH AG Tractor Accessories & Implements
Group 15 NH AG Tractor Accessories & Implements
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 09/01/13 1
Loaders 09/01/13
110TL 3
235TLA 4
240TLA 5
250TL 6
270TL 7
Page 1 of 7
Loader Ordering and Pricing Information
eQuipment Ordering Codes Face Plate
Boomer 20/25 X X 235TL 550941102 730892026 FSTPK - FAST PICK 54 in. Bucket X X 54" X X $4,109.00
Boomer 40/50 250TLA 550941076 726582006 LDARMS - Loader Arms Only Loader Arm Only NO BUCKET X $4,047.00
Boomer 40/50 X X 250TLA 550941079 726583056 QALVLV - Quick Attach Less Valve Quick Attach less Valve 72 in. Bucket X X 72" X $6,339.00
Boomer 40/50 X X
Quick Attach less Valve/
250TLA 550941077 726639416 QALVMT - QUICK ATTACH KIT L VLV AND MNT 72 in. Bucket X X 72" $5,369.00
Boomer CVT mount
X X
3040/3045/3050
Boomer CVT
X X 250TL 550941093 726585046 CABCVT - Complete LDR QA kit for CVT Cab Fast Pick 72 in. Bucket X X 72" X X $7,240.00
3040/3045/3050
WORKMASTER 45/55 X X 270TL 550310489 726639005 LDARMS-ONLY THE LOADER ARMS FSTPK-FAST PICK 72 in. Bucket X X 72" X X $5,073.00
Page 2 of 7
-CP9R 01
Standard Equipment
TRACTOR COMPATIBILITY pivot point 2431
WORKMASTER™ 35
WORKMASTER™ 40 Maximum Rollback (degrees) 23
Maximum Dump Angle (degrees) 40
SPECIFICATIONS:
Maximum Lift Height (inches) @ Pivot Bucket Capacities
Pin 100.2 110TL Struck Heaped
Digging Depth (inches) 2.1 60" Bucket .34 cu yd. .42 cu yd.
Lift Capacity to maximum lift height 68" Bucket .37 cu yd. .44 cu yd.
(lbs.) 68" HD .38 cu yd. .47 cu ya.
@ bucket pivot point 1262
@ 19.7 in. (500mm) from bucket
pivot point 863 *Loader specifications may vary based
on tractor model, hydraulic system, tire
Lift Capacity to 59 in. (1.5m) (lbs.) size, etc.
@ bucket pivot point 1843
@ 19.7 in. (500mm) from bucket
pivot point 1540 WARRANTY
New Holland Standard Warranty Applies
Breakout Force (lbs.)
@ bucket pivot point 3338
@ 19.7 in. (500mm) from bucket
Page 3 of 7
-CP9R 01 0018 000 02-SEP-13
-CP9P 01
Standard Equipment
TRACTOR APPLICATION:
Boomer 20 & 25
Raising time: 2.4 sec
NOTE: Lowering time: 1.2 sec
Important Compatibility Information Bucket dumping time: 2.4 sec
- 235TL is only compatible with Boomer Bucket roll back time: 1.2 sec
20 & 25 compact tractors Max lift height (to bucket pivot pin):
80.7 in / 2050 mm
- To assure proper performance, see Max lift height (under level bucket):
Operator's Manual for recommended 75.6 in / 1920 mm
counterweighting Reach at max lift height:
25.2 in / 640 mm
Loader Specifications: Max dump angle:
Lift capacity (bucket pivot pin, max 51.0°
height): Bucket roll back angle:
1034 lbs / 470 kg 29.0°
Lift capacity (500 mm forward, max Digging depth:
height): 3.9 in / 100.0 mm
704 lbs / 320 kg Bucket width:
Lift capacity (bucket pivot pin, 1500 mm 54.0 in / 1371 mm
height):
1298 lbs / 590 kg Loader specifications may vary based
Lift capacity (500 mm forward, 1500 on tractor model, engine speed,
mm hydraulic system, tire type/
height): size, etc.
968 lbs / 440 kg
Breakout force (bucket pivot pin): Bucket Capacities
1672 lbs / 760 kg 235TL Struck Heaped
Breakout force (500 mm forward): 54" Bucket .20 cu yd. .24 cu yd.
1166 lbs / 530 kg
Bucket roll back force at ground level WARRANTY
(500 mm): New Holland Standard Warranty Applies
1298 lbs / 590 kg
Page 4 of 7
-CP9P 01 0018 000 02-SEP-13
-CP9J 01
Standard Equipment
Boomer™ 30/35 97.6 in / 2479.7 mm
Max lift height (under level bucket):
NOTE: 89.6 in / 2276.5 mm
Important Compatibility Information Clearance with bucket dumped:
-A configured model 240TLA is NOT 72.3 in / 1835.2 mm
compatible with other model tractors: Reach at max lift height:
(Boomer™ 2030/2035, T2210, T2220, 34.0 in#/ 863.6 mm
TC29DA, TC31DA, TC33DA, TC34DA, Max dump angle: 41.3 °
1725,1925,1530,1630,TC25,TC25D, Reach with bucket on ground:
TC29,TC29D,TC33,TC33D) 74.0 in / 1879.6 mm
-To assure proper performance, see Bucket roll back angle: 30.4 °
Operator's Manual for recommended Digging depth: 8.5 in / 215.9 mm
counterweighting Overall height in carrying position:
53.8 in / 1365.3 mm
Loader Specifications: Bucket width: 68.4 in / 1736.7 mm
Lift capacity (bucket pivot pin, max Bucket depth: 22.0 in / 558.8 mm
height): 1370lbs / 621kg Bucket height: 21.4 in / 542.9 mm
Lift capacity (500 mm forward, max Bucket length: 31.0 in / 787.4 mm
height): 1100 lbs / 499 kg Bucket weight: 260 lbs / 118 kg
Lift capacity (bucket pivot pin, 1500 mm Wheelbase: 65.0 in / 1651 mm
height): 1710 lbs / 776 kg Front tires: 25 x 8.50-14 R4
Lift capacity (500 mm forward, 1500 Rear tires: 43 x 16.00-20 R4
mm Loader specifications may vary based
height): 1290 lbs / 585 kg on tractor model, hydraulic system, tire
Breakout force (bucket pivot pin): size, etc.
2925 lbs / 1327 kg *NOTE: None of the 240TLA
Breakout force (500 mm forward): configurations come with mid mount
2250 lbs / 1021 kg valve, couplers or joystick as these items
Bucket roll back force at max height: are now standard on the Boomer™
2550 lbs / 1157 kg 30/35 tractors. If a mid mount valve,
Bucket roll back force at 1500 mm coupler or joystick is needed, these
height items must be ordered from parts.
(500 mm): 2610 lbs / 1184 kg
Bucket roll back force at ground level Loader Bucket Capacities
(500 mm): 1800 lbs / 816 kg
Raising time: 3.8 sec 240TL Struck Heaped
Lowering time: 1.7 sec 60” Bucket .38 cu yd. .47 cu yd
Lowering time (float): 2.2 sec 68" Bucket .43 cu yd. .53 cu yd
Bucket dumping time: 2.2 sec
Bucket roll back time: 1.7 sec WARRANTY
Max lift height (to bucket pivot pin): New Holland Standard Warranty Applies
Page 5 of 7
-CP9J 01 0018 000 02-SEP-13
-CP9B 06
Page 6 of 7
-CP9B 06 0018 000 02-SEP-13
-CP9B 09
TRACTOR COMPATIBILITY:
Reach @ Maximum Lift (inches) NA
WorkMaster™ 45/55 Bucket Rollback (degrees) 34
Bucket Dump Angle (degrees) 57
To assure proper performance, see
Operator's Manual for recommended Loader specifications may vary based
counterweighting. on tire size
Page 7 of 7
-CP9B 09 0018 000 02-SEP-13
Implement Index LATEST PAGE
Equipment Description REVISION NUMBER
Work EZ ™ I m p l e m e n t Mo d e l s :
915GBH BACKHOE
US PRICE LIST
(Telford, TN)
Standard Equipment
TRACTOR APPLICATION: WARRANTY
Boomer™ 20 / 25 New Holland Standard Warranty Applies
Page 1 of 87
-CP2C 01 0017 000 02-SEP-13
-CP2C 01
915GBH BACKHOE
US PRICE LIST
(Telford, TN)
Models
COMMERCIAL TECHNICAL TYPE HITCH AND SUBFRAME Weight List Price
MODEL
915GBH 551000420-915GBH B-HOE Subframe Cls 1 20/25 1,065 LB $7,092.00
80IN CL
BACKHOE OPTIONS
SUBFRAMES
HYDRAULICS
BUCKETS
Page 2 of 87
-CP2C 01 0017 000 02-SEP-13
-CP2C 01
915GBH BACKHOE
US PRICE LIST
(Telford, TN)
OTHER
Page 3 of 87
-CP2C 01 0017 000 02-SEP-13
-CP2C 01
915GBH BACKHOE
US PRICE LIST
(Telford, TN)
Factory Supplied Attachments
Order Code Description Weight List Price
Page 4 of 87
-CP2C 01 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Standard Equipment
TRACTOR APPLICATION:
Boomer 30, 35, 40, & 50 TRUCK LOADING PATTERN
Boomer CVT 3040, 3045, & 3050 28 Units (depending on size with
Compact WORKMASTER 35 & 40 buckets)
Utility WORKMASTER 45 & 55 Can be combined with other
T1510/T1520/T1530 (Current Inv.) products from source
Dealer pickup permitted
Page 5 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Models
COMMERCIAL MODEL Weight List Price
920GBH 872 LB $7,777.00
ATTACHMENT SECTION
REQUIRED OPTIONS
Page 6 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
SD_N5404 16 IN HD BUCKET
716494 16 in./406mm heavy-duty bucket 171 LB $554.00
(716494066)
Page 7 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
SD_N5408 24 IN HD BUCKET
716493 24 in./609mm heavy-duty bucket 214 LB $647.00
(716493046)
OPTIONAL EQUIPMENT
Page 8 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Factory Supplied Attachments
Order Code Description Weight List Price
Hydraulic Kits
717974006 HYD KIT CLS 2 30/35 HP 315 KG $173.00
Hydraulic kit for all BOOMER 30/35 Compact tractors
717975006 HYD KIT CLS 3 40/50 HP GEAR 35 KG $265.00
Hydraulic kit for BOOMER 40/50 Compact tractors
with a Gear Transmission
717976006 HYD KIT CLS 3 40/50 HP HST 35 KG $265.00
Hydraulic kit for BOOMER 40/50 Compact tractors
with a Hydrostatic Transmission
439056006 HYD Kit CLS 2 35/40 HP Economy 35 KG $173.00
Hydraulic kit for all WORKMASTER 35/40 Compact tractors
717914006 HYD KIT WM 20 KG $276.00
Hydraulic kit for all WORKMASTER 45/55 Utility tractors
716395001 HYDRAULIC KIT 41 KG $265.00
920, 930GH - T1510, 1520
715431026 HYD SNGL LEVR FAR 31& 35 12 KG $265.00
For Boomer™ 3040/3045/3050, T1530
Fits all Gear, HST, and CVT Models
Buckets
716398016 BUCKET-STD 9" 2 TEETH .87 CU. 46 KG $343.00
heaped For BH90 only.
716399026 BUCKET-STD 12" 3 TEETH 1.24 CU 72 KG $503.00
Cu. Ft. heaped
716494066 BUCKET-HD 16" 3 TEETH 1.76 CU 82 KG $554.00
1.76 Cu. Ft. heaped
Page 9 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 02
920GH BACKHOE
US PRICE LIST
Optional Equipment
716411016 11.0 GPM PUMP FOR UTILITY TRAC 54 KG $1,382.00
Order either 715743(006) or 716411(016). Do NOT order both.
716525026 BIG FOOT DIRT PADS 52 KG $162.00
12 in. square
716410016 STREET PAD 172,190,1102 5 KG $233.00
717916016 MECHANICAL THUMB 7.5/8.5/9.5 F 82 KG $594.00
Page 10 of 87
-CP1N 02 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Standard Equipment
TRACTOR APPLICATION:
Boomer 40, & 50 TRUCK LOADING PATTERN
Workmaster 45 & 55 28 Units (depending on size with
Boomer CVT 3040, 3045, & 3050 buckets)
T1510/T1520/T1530 (Current Inv.) Can be combined with other
products from source
Dealer pickup permitted
Page 11 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Models
COMMERCIAL MODEL Weight List Price
930GBH 900 LB $9,382.00
REQUIRED OPTIONS
Page 12 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
SD_N5404 16 IN HD BUCKET
716494 16 in./406mm heavy-duty bucket 171 LB $554.00
(716494066)
SD_N5408 24 IN HD BUCKET
716493 24 in./609mm heavy-duty bucket 214 LB $647.00
(716493046)
OPTIONAL EQUIPMENT
Page 13 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
Page 14 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
Factory Supplied Attachments
Order Code Description Weight List Price
Hydraulic Kits
717975006 HYD KIT CLS 3 40/50 HP GEAR 35 KG $265.00
Hydraulic kit for BOOMER 40/50 Compact tractors
with a Gear Transmission
717976006 HYD KIT CLS 3 40/50 HP HST 35 KG $265.00
Hydraulic kit for BOOMER 40/50 Compact tractors
with a Hydrostatic Transmission
717914006 HYD KIT WM 20 KG $276.00
Hydraulic kit for all WORKMASTER 45/55 Utility tractors
716395001 HYDRAULIC KIT 41 KG $265.00
920, 930GH - T1510, 1520
715431026 HYD SNGL LEVR FAR 31& 35 12 KG $265.00
For Boomer™ 3040/3045/3050, T1530
Fits all Gear, HST, and CVT Models
Buckets
716399026 BUCKET-STD 12" 3 TEETH 1.24 CU 72 KG $503.00
Cu. Ft. heaped
716494066 BUCKET-HD 16" 3 TEETH 1.76 CU 82 KG $554.00
1.76 Cu. Ft. heaped
716434036 BUCKET-STD 18" 4 TEETH 2.02 CU 84 KG $578.00
2.02 Cu. Ft. heaped
716493046 BUCKET-HD 24" 5 TEETH 2.82 CU 86 KG $647.00
2.82 Cu. Ft. heaped
Optional Equipment
716411016 11.0 GPM PUMP FOR UTILITY TRAC 54 KG $1,382.00
Order either 715743(006) or 716411(016). Do NOT order both.
716525026 BIG FOOT DIRT PADS 52 KG $162.00
12 in. square
716410016 STREET PAD 172,190,1102 5 KG $233.00
Page 15 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1N 03
930GH BACKHOE
US PRICE LIST
(Gibson City, Illinois)
717916016 MECHANICAL THUMB 7.5/8.5/9.5 F 82 KG $594.00
Page 16 of 87
-CP1N 03 0017 000 02-SEP-13
-CP1L 02
SHIPPING POINT:
Thetford Mines, Quebec, Canada
Page 17 of 87
-CP1L 02 0017 715 02-SEP-13
-CP1L 02
ATTACHMENT SECTION
REQUIRED OPTIONS
OPTIONAL EQUIPMENT
Page 18 of 87
-CP1L 02 0017 715 02-SEP-13
-CP1L 02
Optional Equipment
715679006 RUBBER BLADE EDGE 45 KG $258.00
for 60CBH
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
Page 19 of 87
-CP1L 02 0017 715 02-SEP-13
-CP1L 04
Page 20 of 87
-CP1L 04 0017 715 02-SEP-13
-CP1L 04
REQUIRED OPTIONS
OPTIONAL EQUIPMENT
Page 21 of 87
-CP1L 04 0017 715 02-SEP-13
-CP1L 04
Optional Equipment
715679026 Rubber Cutting Edge 60 KG $258.00
for 72CB or 72CBH
Ballast Box
717747006 Ballast box 1000 Lb Max 169 KG $611.00
(Category I) 1000 LB MAX
(Class III compact tractors)
Page 22 of 87
-CP1L 04 0017 715 02-SEP-13
-CP1C 01
Page 23 of 87
-CP1C 01 0017 001 02-SEP-13
-CP1C 01
COMPLETING PACKAGES
OPTIONAL EQUIPMENT
Page 24 of 87
-CP1C 01 0017 001 02-SEP-13
-CP1C 01
Optional Equipment
717231006 2"X6" SIDE CASTER WHL KIT 30 KG $313.00
6" X 3" on 526GR
(717231006)
439044006 Hydraulic Angling Kit Boomer 20/25 5 KG $583.00
For 526gr
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
Page 25 of 87
-CP1C 01 0017 001 02-SEP-13
-CP1C 03
Page 26 of 87
-CP1C 03 0017 001 02-SEP-13
-CP1C 03
COMPLETING PACKAGES
Page 27 of 87
-CP1C 03 0017 001 02-SEP-13
-CP1C 03
OPTIONAL EQUIPMENT
Page 28 of 87
-CP1C 03 0017 001 02-SEP-13
-CP1C 03
Optional Equipment
715677016 HYD ANGLING 60&72"(2.0,3.0) 10 KG $649.00
Fits 72CO on:
- Boomer™ 30/35/40/50,
- WORKMASTER 35/40
- Boomer™ 3040/3045/3050 Cab CVT
- T1510, T1520
(715677016)
717231016 2 X 6 side caster w/Wheel kit 47 KG $551.00
6" x 2" on 72COBA, 72COBB
(717231016)
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
717747006 Ballast box 1000 Lb Max 169 KG $611.00
(Category I) 1000 LB MAX
(Class III compact tractors)
Page 29 of 87
-CP1C 03 0017 001 02-SEP-13
-CP1M 01
Page 30 of 87
-CP1M 01 0017 000 02-SEP-13
-CP1M 01
ATTACHMENT SECTION
REQUIRED OPTIONS
Page 31 of 87
-CP1M 01 0017 000 02-SEP-13
-CP1M 01
Optional Equipment
716102006 ELECTRIC CHUTE ROTATION 5 KG $489.00
Includes motor, switch and wiring.
for 836GS and 50CS
716103006 ELECTRIC CHUTE DEFLECTOR 3 KG $659.00
Includes actuator, switch and wiring.
for 836GS and 50CS
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
Page 32 of 87
-CP1M 01 0017 000 02-SEP-13
-CP1M 03
Page 33 of 87
-CP1M 03 0017 000 02-SEP-13
-CP1M 03
OPTIONAL EQUIPMENT
Page 34 of 87
-CP1M 03 0017 000 02-SEP-13
-CP1M 03
Optional Equipment
716864026 Hyd chute deflector 15 KG $442.00
Includes one cylinder, brackets and mounting hardware.
for 63CS, 63CSH, 72CSH, 74CSH
717172016 HYDRAULIC CUTE ROTATION KIT 10 KG $989.00
Includes motor, flow restrictors, hose and quick couplers.
for 63CS, 63CSH, 72CSH, 74CSH
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
Page 35 of 87
-CP1M 03 0017 000 02-SEP-13
-CP1M 04
Page 36 of 87
-CP1M 04 0017 000 02-SEP-13
-CP1M 04
REQUIRED OPTIONS
OPTIONAL EQUIPMENT
Page 37 of 87
-CP1M 04 0017 000 02-SEP-13
-CP1M 04
Page 38 of 87
-CP1M 04 0017 000 02-SEP-13
-CP1M 04
Optional Equipment
715345006 3 Part Chute 45 KG $425.00
Replaces 2-part chute for additional adjustment.
for 63CS, 63CSH, 72CSH, 74CSH
716864026 Hyd chute deflector 15 KG $442.00
Includes one cylinder, brackets and mounting hardware.
for 63CS, 63CSH, 72CSH, 74CSH
717172016 HYDRAULIC CUTE ROTATION KIT 10 KG $989.00
Includes motor, flow restrictors, hose and quick couplers.
for 63CS, 63CSH, 72CSH, 74CSH
Ballast Box
717746006 BALLAST BOX 500 LB MAX 0.5,0.7 100 KG $235.00
500 LB Max
(Class .5, .75, 1, & 2 compact tractors)
Page 39 of 87
-CP1M 04 0017 000 02-SEP-13
-CP1M 05
Page 40 of 87
-CP1M 05 0017 000 02-SEP-13
-CP1M 05
REQUIRED OPTIONS
OPTIONAL EQUIPMENT
Page 41 of 87
-CP1M 05 0017 000 02-SEP-13
-CP1M 05
Page 42 of 87
-CP1M 05 0017 000 02-SEP-13
-CP1M 05
Optional Equipment
715345006 3 Part Chute 45 KG $425.00
Replaces 2-part chute for additional adjustment.
for 63CS, 63CSH, 72CSH, 74CSH
716864026 Hyd chute deflector 15 KG $442.00
Includes one cylinder, brackets and mounting hardware.
for 63CS, 63CSH, 72CSH, 74CSH
717172016 HYDRAULIC CUTE ROTATION KIT 10 KG $989.00
Includes motor, flow restrictors, hose and quick couplers.
for 63CS, 63CSH, 72CSH, 74CSH
716248006 Drift Cutter 28 KG $144.00
Yields an extra 5 inches in cutting width.
for 72CSHA
Ballast Box
717747006 Ballast box 1000 Lb Max 169 KG $611.00
(Category I) 1000 LB MAX
(Class III compact tractors)
Page 43 of 87
-CP1M 05 0017 000 02-SEP-13
-CP1M 06
Page 44 of 87
-CP1M 06 0017 000 02-SEP-13
-CP1M 06
REQUIRED OPTIONS
Page 45 of 87
-CP1M 06 0017 000 02-SEP-13
-CP1M 06
Required Options
715343046 Manual Roation 64-74-84IN 9 KG $209.00
64CSR - Serial Number YAWR00647 & Up
Required if hydraulic chute is not selected.
715342036 Hydraulic Rotation 64IN 52 KG $503.00
64CSR - Serial Number YAWR00647 & Up
Required if manual chute rotation is not selected. Includes
hydraulic cylinder. Hoses not inclued.
*one tractor rear remote valve is required for operation.
Page 46 of 87
-CP1M 06 0017 000 02-SEP-13
-CP1Z 01
Standard Equipment
260GMS Side Discharge 266GMS Side Discharge
(717966166) (717966186)
Page 47 of 87
-CP1Z 01 0017 000 02-SEP-13
-CP1Z 01
Standard Equipment
limited turn angle:
Right Hand - 34 degrees
272GMS Side Discharge Left Hand - 35 degrees
Turf (R3) - Yes, limited turn angle:
TRACTOR APPLICATION: Right Hand - 34 degrees
Boomer 40 & 50 Left Hand - 35 degrees
(717966086) Galaxy Turf - NO
Page 48 of 87
-CP1Z 01 0017 000 02-SEP-13
-CP1Z 01
Models
COMMERCIAL MODEL Weight List Price
260GMS 538 $3,431.00
266GMS BMR/WM 443 LB $3,537.00
Includes the following Equipment
LINKAGE CLS 2 ECON (439054) $437.00
Page 49 of 87
-CP1Z 01 0017 000 02-SEP-13
-CP1Z 01
COMPLETING PACKAGES
COMPLETING PACKAGES
Page 50 of 87
-CP1Z 01 0017 000 02-SEP-13
-CP1Z 01
Page 51 of 87
-CP1Z 01 0017 000 02-SEP-13
-CP1A 01
SIZE:
310GM - 60" (717676006) ACCESSORIES
320GM - 72" (717676026) (Order through Service Parts)
330GM - 90" (717676046) Mulching Kits:
SIT110283 72" Rear Discharge
SIT110284 60" Rear Discharge
SPECIFICATIONS: SIT110285 90" Rear Discharge
Cutting Height Range 1 to 4" Anti-Scalp Kit (front adjustable roler):
3 Pt Mounted (floating hitch) Cat. 1 SIT00364 60" & 72"
Rear Discharge SIT00503 90"
Discharge Safety Chain Standard Pneumatic Tire Kit:
V Belt Drive Standard SIT110318 60" Set of 4
Solid Rubber Guage Wheels (fully SIT110319 72" Set of 4
rotating) 4 SIT110320 90" Set of 4
Standard PTO (RPM) 540 Note: All Pneumatic Tire Kits Include
Wheels and Forks
PTO HP Rating up to:
310GM - 30
320GM - 40
330GM - 60
Number of Blades
310GM - 3
320GM - 3
330GM - 5
Blade Speed (RPM)
Page 52 of 87
-CP1A 01 0017 000 02-SEP-13
-CP1A 01
Page 53 of 87
-CP1A 01 0017 000 02-SEP-13
-CP1T 01
Page 54 of 87
-CP1T 01 0017 000 02-SEP-13
-CP1T 01
716GCA - 60"
(717979016)
717GCA - 72"
(717979026)
716GCA - 60"
(717980016)
717GCA - 72"
(717980026)
SD_N6433 COATING
717991 Galvanized $109.00
Page 55 of 87
-CP1T 01 0017 000 02-SEP-13
-CP1T 01
(Distribution Center)
Medium-Duty - 738GCA
Heavy-Duty - 757GCA, 758GCA
(439026016)
Heavy-Duty - 768GCA
(439026026)
Heavy-Duty - 769GCA
(439026036)
Page 56 of 87
-CP1T 01 0017 000 02-SEP-13
-CP1T 01
714GCA ONLY
717979006 48" Front safety chains 27 KG $188.00
717980006 48" Rear safety chains 42 KG $188.00
716GCA ONLY
717979016 60" Front safety chains 29 KG $188.00
717980016 60" Rear safety chains 44 KG $188.00
717GCA ONLY
717979026 72" Front safety chains 33 KG $188.00
717980026 72" Rear safety chains 48 KG $188.00
Page 57 of 87
-CP1T 01 0017 000 02-SEP-13
-CP1T 02
Page 58 of 87
-CP1T 02 0017 000 02-SEP-13
-CP1T 02
SD_N6433 COATING
717991 Galvanized $270.00
Medium-Duty - 738GCA
Heavy-Duty - 757GCA, 758GCA
(439026016)
Heavy-Duty - 768GCA
(439026026)
Heavy-Duty - 769GCA
(439026036)
Page 59 of 87
-CP1T 02 0017 000 02-SEP-13
-CP1T 03
Page 60 of 87
-CP1T 03 0017 000 02-SEP-13
-CP1T 03
SD_N6433 COATING
717991 Galvanized $109.00
if MODEL is 769GCA 96in HD Rotary C $270.00
if MODEL is 768GCA 84in HD Rotary C-CATII $270.00
if MODEL is 758GCA 84in HD Rotary C $270.00
Medium-Duty - 738GCA
Heavy-Duty - 757GCA, 758GCA
(439026016)
Heavy-Duty - 768GCA
(439026026)
Heavy-Duty - 769GCA
(439026036)
if MODEL is 757GCA 72in RR3 Rot $125.00
if MODEL is 758GCA 84in HD Rotary C $125.00
if MODEL is 768GCA 84in HD Rotary C-CATII $170.00
if MODEL is 769GCA 96in HD Rotary C $227.00
Page 61 of 87
-CP1T 03 0017 000 02-SEP-13
-CP1T 04
Page 62 of 87
-CP1T 04 0017 000 02-SEP-13
-CP1T 04
Page 63 of 87
-CP1T 04 0017 000 02-SEP-13
-CP1T 04
Page 64 of 87
-CP1T 04 0017 000 02-SEP-13
-CP1T 04
(Distribution Center)
SD_N6433 COATING
717991 Galvanized $109.00
if MODEL is 770GCA 120in HD Pt Ridgid Rot $270.00
if MODEL is 770GCA 120in HD Pt Ridgid Rot $812.00
if MODEL is 780GCA 180in Pt Flex Rot C $812.00
if MODEL is 780GCB 780GCB $812.00
if MODEL is 780GCC $812.00
Page 65 of 87
-CP1T 04 0017 000 02-SEP-13
-CP1K 01
Page 66 of 87
-CP1K 01 0017 000 02-SEP-13
-CP1K 01
COMPLETING PACKAGES
Page 67 of 87
-CP1K 01 0017 000 02-SEP-13
-CP2A 01
(Distribution Center)
Standard Equipment
The WORK EZ® EZ Match™ Quick Hitch Heavy-duty steel construction
is designed to make changing from one Lower arms lock automatically
3-point hitch attachment to another quick Fast, easy attachment and release
and EZ! The upper hook easily slips into Designed to ASAE S278.7 Quick Hitch
position and simply lock the lower hooks standards
with quick flip of two handles - many
times from the comfort and convenience MODEL: WORK EZ® EZ Match™
of the tractor seat. Width (inches) - 28 center to center
(Hooks are 1 ⅛ " wide)
Many other New Holland products are Height (inches) - 24
quick hitch compatible - rear blades, box Weight (pounds) - 80
blades, landscape rakes, 6 ft Disc and Maximum Horsepower - 60
90" rear finishing mower.
WARRANTY
Designed for use on Category 1, 3-point New Holland Standard Warranty Applies
hitch tractors and implements
Models
Page 68 of 87
-CP2A 01 0017 000 02-SEP-13
-CP1W 01
WARRANTY
New Holland Standard Warranty Applies
Page 69 of 87
-CP1W 01 0017 000 02-SEP-13
-CP1W 01
SD_N6433 COATING
717991 Galvanized $95.00
Page 70 of 87
-CP1W 01 0017 000 02-SEP-13
-CP1W 02
Page 71 of 87
-CP1W 02 0017 000 02-SEP-13
-CP1W 02
Page 72 of 87
-CP1W 02 0017 000 02-SEP-13
-CP1W 03
Page 73 of 87
-CP1W 03 0017 000 02-SEP-13
-CP1W 03
Page 74 of 87
-CP1W 03 0017 000 02-SEP-13
-CP1W 04
Page 75 of 87
-CP1W 04 0017 000 02-SEP-13
-CP1W 04
WARRANTY
New Holland Standard Warranty Applies
Page 76 of 87
-CP1W 04 0017 000 02-SEP-13
-CP1W 04
Page 77 of 87
-CP1W 04 0017 000 02-SEP-13
-CP1X 01
Page 78 of 87
-CP1X 01 0017 000 02-SEP-13
-CP1X 01
Page 79 of 87
-CP1X 01 0017 000 02-SEP-13
-CP1X 02
WARRANTY
New Holland Standard Warranty Applies
Page 80 of 87
-CP1X 02 0017 000 02-SEP-13
-CP1X 02
Page 81 of 87
-CP1X 02 0017 000 02-SEP-13
-CP1X 03
Page 82 of 87
-CP1X 03 0017 000 02-SEP-13
-CP1X 03
Page 83 of 87
-CP1X 03 0017 000 02-SEP-13
-CP1U 01
(Distribution Center)
Standard Equipment
WORK EZ® Disk Harrow is designed MODEL: EZ78DC
to compliment compact and utility Size - 78 in.
tractors equipped with 3-point hitch and SPECIFICATIONS:
is Work EZ® - EZ Match™ compatible. Cutting Width (inches) - 70
This disk harrow combines overall Tractor Horsepower (max.) - 70
weight and notched blades (front and Hitch - Cat. I
rear) to aggressively cut and turn the soil, Overall Length (inches) - 60
regardless of residue conditions. Overall Width (inches) - 79
Maximum Cutting Depth (inches) - 6
WARRANTY Number of Disk Blades - 20 Notched
New Holland Standard Warranty Applies Blade (front and rear)
Disk Blade Size (inches) - 18 (diameter)
Disk Blade Spacing - 5 1/2" F, 6 1/2",
7 1/2" R
Bearing Lubrication -Sealed Bearings
Weight (pounds) - 679
Models
Page 84 of 87
-CP1U 01 0017 000 02-SEP-13
-CP1V 01
(Distribution Center)
Standard Equipment
WORK EZ® Landscape Rakes are EZ72LR
designed to compliment compact and Rake Width (inches) - 72
utility tractors equipped with 3-point hitch Rake Height (inches) - 15
and are also Work EZ® - EZ Match™ Hitch - Cat. I
compatible. These basic units offer a Tractor Horsepower (max.) - 50
choice of angle selection and provide 1 Rake Pivot (degrees) - 360°
inch tine spacing for precision soil Angle - 5 Forward/3 Reverse
preparation and leveling. Pivot King Pin (inches) - 1-1/4
Tine Spacing (inches) - 1
MODEL SPECIFICATIONS: Tine Size (inches) - 5/16 x 1
EZ60LR Tine Material - High Carbon Spring Steel
Rake Width (inches) - 60 Weight (pounds) - 219
Rake Height (inches) - 15
Hitch - Cat. I EZ84LR
Tractor Horsepower (max.) - 50 Rake Width (inches) - 84
Rake Pivot (degrees) - 360° Rake Height (inches) - 15
Angle - 5 Forward/3 Reverse Hitch - Cat. I
Pivot King Pin (inches) - 1-1/4 Tractor Horsepower (max.) - 50
Tine Spacing (inches) - 1 Rake Pivot (degrees) - 360°
Tine Size (inches) - 5/16 x 1 Angle - 5 Forward/3 Reverse
Tine Material - High Carbon Spring Steel Pivot King Pin (inches) - 1-1/4
Weight (pounds) - 195 Tine Spacing (inches) - 1
Tine Size (inches) - 5/16 x 1
Tine Material - High Carbon Spring Steel
Weight (pounds) - 276
Models
Page 85 of 87
-CP1V 01 0017 000 02-SEP-13
-CP2B 01
Standard Equipment
WORK EZ® Bale Carriers and Spears
are designed to compliment compact
and utility tractors equipped with 3-point
hitch for handling round and square hay
bales. The WORK EZ® Bale Carriers
and Spears are also Work EZ® - EZ
Match™ compatible.
WARRANTY
New Holland Standard Warranty Applies
MODEL: Work EZ® Bale Carrier MODEL: Work EZ® Bale Spear
Application - Standard duty Application - Standard duty
Weight - 155 lbs Weight - 98 lbs
Weight rating - 2000 lbs Weight rating - 2000 lbs
Tractor Horsepower (max) - 60 Tractor horsepower (max) - 60
Hitch - Cat. I Hitch - Cat. I
Hot dipped galvanized frame Hot dipped galvanized frame
NOTE: Fork tines go under bale Replaceable high carbon steel spear
Two welded bottom stabilizing spears
Models
COMMERCIAL MODEL Weight List Price
WORK EZ BALE CARRIER 88 LB $426.00
WORK EZ BALE SPEAR 155 LB $470.00
Page 86 of 87
-CP2B 01 0017 000 02-SEP-13
-CP2B 02
Standard Equipment
WORK EZ® Hay Spears are designed to
compliment most tractors and skid
steers that are Universal Quick Hitch
Compatible for handling round and
square hay bales.
WARRANTY
New Holland Standard Warranty Applies
MODEL: Work EZ® Single Bale Quick MODEL: Work EZ® Double Bale Quick
Attach Attach
Application - Standard duty Application - Standard duty
Weight - 153 lbs Weight - 168 lbs
Weight rating - 2000 lbs Weight rating - 2000 lbs
Tractor Horsepower (max) - 80 Tractor Horsepower (max) - 80
Hitch - Universal Q/A Hitch - Universal Q/A
Hot dipped galvanized frame Hot dipped galvanized frame
Replaceable high carbon steel spear Two replaceable high carbon steel
Two welded bottom stabilizing spears spears
One welded top stabilizing spear
Models
Page 87 of 87
-CP2B 02 0017 000 02-SEP-13
600TL Series Ag Loader Index
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 09/01/13 1
615TL/625TL 09/01/13 3
630TL 09/01/13 7
635TL 09/01/13 15
640TL 09/01/13 23
645TL 09/01/13 29
Page 1 of 42
Farm Loader Compatibility
COMPATIBILITY Self Leveling Option
Loader Platform Axle Configuration N- Non Self Leveling
M- Mechanical Self
Series Tractor Model ROPS CAB 2WD FWD SS Leveling
615TL WorkmasterTM 45 & 55 X X X N
625TL WorkmasterTM 65 & 75 X X X N
TT60A, TT75A N
630TL T4030F, T4040F ,T4050F, T4060F X X X X M/N
TD4040F X X M/N
T4020, T4030 X X X X M/N
TN60A, TN70A, TN75A X X X X M/N
TN60DA, TN70DA, TN75DA M/N
T4.75 X X X N
T4.75 X X X M/N
635TL T4040, T4050 X X X X M/N
TN85A, TN95A X X X X M/N
TN85DA, TN95DA X X X X M/N
TD5030 X X X X M/N
TD75D, TD80D X X X X M/N
T4.75 X X X M/N
640TL TD5050 X X X X M/N
TD95D X X X X M/N
T5040, T5050, T5060, T5070 X X X X M/N
T5.95, T5.105, T5.115 X X M/N
645TL TS6020, TS6030 X X X X M/N
TS6.100, TS6.110 X X X X M/N
655TL PowerStar T4.75 X X X M/N
Page 2 of 42
-CP9G 01
615TL/625TL LOADER
US PRICE LIST
(NIAGARA FALLS, CANADA)
Standard Equipment
Model 615TL Tractor Mounted Farm Loader specifications may vary with
Loader - For installation on the tractor model, hydraulic system, tire
WORKMASTER™ 45/55. size, etc.
SPECIFICATIONS – 625TL:
Maximum lift Height - in(mm) 126 (3190)
Dump Clearance - in(mm) 99 (2510)
Digging depth - in(mm) 4 (100)
Lift Capacity to max height at pivot pin -
lb (kg) 3250 (1474)
Lift Capacity to 59in. (1.5m) at pivot pin -
lb (kg) 3450 (1606)
Breakout Force at pivot point - lb (kg)
4670 (2118)
Reach @ maximum lift - in(mm)
31 (780)
Bucket Rollback 24°
Bucket Dump Angle 37°
Page 3 of 42
-CP9G 01 0018 000 04-SEP-13
-CP9G 01
615TL/625TL LOADER
US PRICE LIST
(NIAGARA FALLS, CANADA)
Models
COMMERCIAL MODEL VERSION Weight List Price
615TL Fast Pick 1,250 LB $6,410.00
615TL Standard 500 LB $3,208.00
625TL Fast Pick 1,300 LB $7,008.00
625TL Standard 560 LB $3,806.00
BRACKETS
MOUNTING KITS
HYDRAULIC KITS
LOADER VALVE
LOADER OPTIONS
GRILL GUARDS
Page 4 of 42
-CP9G 01 0018 000 04-SEP-13
-CP9G 01
615TL/625TL LOADER
US PRICE LIST
MATERIAL BUCKETS
SD_K5230 BUCKET
730417 84" Std Material Bucket Q/A $902.00
625 Only
0.59 yd struck capacity, 0.71 yd heaped capacity
Page 5 of 42
-CP9G 01 0018 000 04-SEP-13
-CP9G 01
615TL/625TL LOADER
US PRICE LIST
(NIAGARA FALLS, CANADA)
Factory Supplied Attachments
Order Code Description Weight List Price
Grill Guards
715824116 Grill Guards 35 KG $114.00
Workmaster(TM) 45/55
715824126 Grill Guards 37 KG $114.00
WorkMaster (TM) 65/75, TT60A/75A
713670006 48IN Fork 55IN Wide 2200 LB Cap SSL 270 LB $863.00
SS style Pallet Fork
48" fork, 55" wide 2,200 lb capacity
615TL/625TL
Page 6 of 42
-CP9G 01 0018 000 04-SEP-13
-CP9M 01
Standard Equipment
T4020, T4030, TNA/DA Series (3 cyl) T4030F, T4040F
Standard Axle Standard Axle
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSL/NSL - 9.9 MSL/NSL - 9.9
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 7.2 MSL/NSL - 7.2
Digging Depth (inches): Digging Depth (inches):
MSL/NSL - 5.9 MSL - 6.3 NSL - 5.9
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 2,552 pivot point (lbs.): MSL - 2,552
NSL - 1,782 NSL - 1,782
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 3,366 pivot point (lbs.): MSL - 3,366
NSL - 3,190 NSL - 3,190
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL - 3.7 MSL/NSL - 37.4
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL - 86.3 MSL/NSL - 82.3
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL/NSL - 42 MSL/NSL – 47
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 52 MSL/NSL - 47
TD4000F T4050F
Standard Axle Standard Axle
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSL/NSL - 9.8 MSL/NSL - 9.9
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 7.1 MSL/NSL - 7.2
Digging Depth (inches): Digging Depth (inches):
MSL/NSL - 6.3 MSL/NSL - 6.3
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 2,552 pivot point (lbs.): MSL - 2,552
NSL - 1,782 NSL - 1,782
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 3,366 pivot point (lbs.): MSL - 3,366
NSL - 3,190 NSL - 3,190
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL - MSL/NSL - 35.1
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL - 85.1 MSL/NSL - 82.7
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL/NSL - 49 MSL/NSL – 47
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 45 MSL/NSL - 47
Page 7 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
Standard Equipment
NOTE: IMPORTANT ORDERING
PowerStar T4.75 2WD & 4WD INFORMATION
Maximum Lift Height (feet): - This loader is compatible with the
MSL/NSL – 10.1 Factory Installed Mid Mounted Valves or
Dump Clearance (feet): the Loader Mounted Valves offered
MSL/NSL – 9.2 with this loader.
Digging Depth (inches):
MSL/NSL - 5.1
Lift Capacity @ 800mm from bucket LOADER COMPONENTS:
pivot point (lbs.): MSL - 2,491 Order the following to make up a
NSL - 1741 complete Model 630TL Quick-Attach
Breakout Force @ 800mm from bucket Loader:
pivot point (lbs.): MSL - 3,349 - (A) Basic Packaged Loader Non Self-
NSL - 3,169 Leveling Package: Includes boom, 4-bar
Reach @ Maximum Lift (inches): bucket linkage, bucket level indicator
MSL/NSL – 41.1 and parking stands.
Reach @ Ground Level (inches): Self-Leveling Package: Includes boom,
MSL/NSL – 85.8 MSL linkage, 4-bar bucket linkage,
Bucket Rollback Angle (degrees): bucket level indicator and parking
MSL/NSL - 44/43 stands.
Bucket Dump Angle (degrees): - (B) Mounting Kit
MSL/NSL - 50 - (C) Hydraulic Components: Loader
Mounted loader valve or Mid Mounted
loader valve ordered as FIO on tractor
*The Loader specifications provided and hydraulic hose package (included
are general specifications and with Loader Mounted loader valve).
may vary based on tractor model, - (D) Bucket(s) and Attachments
hydraulic system, tire size, etc. - (E) Extra Equipment
- (F) Miscellaneous
*See model compatibilty chart for full
tractor model compatibility. WARRANTY
New Holland - 1 Year Warranty
Page 8 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
630TL Euro Style Non Self Leveling 1,616 LB $3,280.00
630TL Euro Style Mechanical Self Leveling 1,761 LB $4,310.00
630TL Skid Steer Style Non Self Leveling 2,100 LB $3,280.00
630TL Skid Steer Style Mechanical Self Leveling 1,780 LB $4,310.00
BRACKETS
Page 9 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
REAR BRACKETS
HYDRAULIC KITS
Page 10 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
HOSE KITS
Page 11 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
LOADER OPTIONS
SOFT RIDE
OTHERS
MATERIAL BUCKETS
SD_K5230 BUCKET
730848 84" Std Material Bucket EUR $896.00
Euro Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730848006
730890 84" Std Material Bucket SSL $896.00
SSL Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730890006
Page 12 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
BALE HANDLING
Page 13 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 01
GRAPPLE BUCKETS
Page 14 of 42
-CP9M 01 0018 000 04-SEP-13
-CP9M 02
Standard Equipment
T4040, T4050, TNA/DA (4 Cylinder) PowerStar T4.75 4WD
Standard Axle Maximum Lift Height (feet):
PowerStar T4.75 4WD only MSL/NSL – 10.7
Maximum Lift Height (feet): Dump Clearance (feet):
MSL/NSL - 10.8 MSL/NSL – 8.0
Dump Clearance (feet): Digging Depth (inches):
MSL/NSL - 8.0 MSL/NSL – 7.1
Digging Depth (inches): Lift Capacity @ 800mm from bucket
MSL/NSL - 6.3 pivot point (lbs.): MSL - 2425
Lift Capacity @ 800mm from bucket NSL - 2006
pivot point (lbs.): MSL - 2,486 Breakout Force @ 800mm from bucket
NSL - 2,046 pivot point (lbs.): MSL - 3057
Breakout Force @ 800mm from bucket NSL - 3552
pivot point (lbs.): MSL - 3,080 Reach @ Maximum Lift (inches):
NSL - 3,564 MSL/NSL – 42.5
Reach @ Maximum Lift (inches): Reach @ Ground Level (inches):
MSL/NSL - 35.1 MSL/NSL – 89.4
Reach @ Ground Level (inches): Bucket Rollback Angle (degrees):
MSL/NSL - 88.3 MSL/NSL - 43
Bucket Rollback Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 45 MSL/NSL - 50
Bucket Dump Angle (degrees):
MSL/NSL - 47 *The Loader specifications provided
are general specifications and
TD5030, TD75D/80D may vary based on tractor model,
Standard Axle hydraulic system, tire size, etc.
Maximum Lift Height (feet):
MSL/NSL - 10.8
Dump Clearance (feet): *See model compatibilty chart for full
MSL/NSL - 7.9 tractor model compatibility.
Digging Depth (inches):
MSL/NSL - 5.9 NOTE: IMPORTANT ORDERING
Lift Capacity @ 800mm from bucket INFORMATION
pivot point (lbs.): MSL - 2,486 - This loader is compatible with the
NSL - 2,046 Factory Installed Mid Mounted Valves or
Breakout Force @ 800mm from bucket the Loader Mounted Valves offered
pivot point (lbs.): MSL - 3,080 with this loader.
NSL - 3,564
Reach @ Ground Level (inches): LOADER COMPONENTS:
MSL/NSL - 85.1 Order the following to make up a
Bucket Rollback Angle (degrees): complete Model 635TL Quick-Attach
MSL/NSL - 42 Loader:
Bucket Dump Angle (degrees): - (A) Basic Packaged Loader Non Self-
MSL/NSL - 50 Leveling Package: Includes boom, 4-bar
bucket linkage, bucket level indicator
Page 15 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
Standard Equipment
and parking stands. with Loader Mounted loader valve).
Self-Leveling Package: Includes boom, - (D) Bucket(s) and Attachments
MSL linkage, 4-bar bucket linkage, - (E) Extra Equipment
bucket level indicator and parking - (F) Miscellaneous
stands.
- (B) Mounting Kit WARRANTY
- (C) Hydraulic Components: Loader New Holland - 1 Year Warranty
Mounted loader valve or Mid Mounted
loader valve ordered as FIO on tractor
and hydraulic hose package (included
Page 16 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
635TL Euro Style Non Self Leveling 1,741 LB $3,586.00
635TL Euro Style Mechanical Self Leveling 1,866 LB $4,616.00
635TL Skid Steer Style Non Self Leveling 1,760 LB $3,586.00
635TL Skid Steer Style Mechanical Self Leveling 1,885 LB $4,616.00
BRACKETS
Page 17 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
REAR BRACKETS
HYDRAULIC KITS
HOSE KITS
Page 18 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
LOADER OPTIONS
SOFT RIDE
OTHERS
Page 19 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
MATERIAL BUCKETS
SD_K5230 BUCKET
730848 84" Std Material Bucket EUR $896.00
Euro Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730848006
730890 84" Std Material Bucket SSL $896.00
SSL Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730890006
Page 20 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 02
BALE HANDLING
GRAPPLE BUCKETS
Page 21 of 42
-CP9M 02 0018 000 04-SEP-13
-CP9M 03
Standard Equipment
T4.85, T4.95, T4.105 TD5050, TD95D
Maximum Lift Height (feet): Standard Axle
MSL/NSL - 11.4 Maximum Lift Height (feet):
Dump Clearance (feet): MSL/NSL - 11.4
MSL/NSL - 8.7 Dump Clearance (feet):
Digging Depth (inches): MSL/NSL - 8.7
MSL/NSL – 5.1 Digging Depth (inches):
Lift Capacity – Max height@ 800mm MSL/NSL - 6.3
from bucket pivot point (lbs.): Lift Capacity @ 800mm from bucket
MSL - 2,733, NSL - 2,266 pivot point (lbs.): MSL - 2,794
Breakout Force @ 800mm from NSL - 2,288
Bucket pivot point (lbs.): Breakout Force @ 800mm from bucket
MSL – 3306, NSL - 3747 pivot point (lbs.): MSL - 3,388
Reach @ Maximum Lift (inches): NSL - 3,850
MSL/NSL – 34.3 Reach @ Maximum Lift (inches):
Reach @ Ground Level (inches): MSL/NSL - 36.6
MSL/NSL – 89.8 Reach @ Ground Level (inches):
Bucket Rollback Angle (degrees): MSL/NSL - 87.9
MSL/NSL - 43 Bucket Rollback Angle (degrees):
Bucket Dump Angle (degrees): MSL/NSL - 43
MSL/NSL - 48 Bucket Dump Angle (degrees):
MSL/NSL - 50
T5000, TLA
Standard Axle *The Loader specifications provided
Maximum Lift Height (feet): are general specifications and
MSL/NSL - 11.4 may vary based on tractor model,
Dump Clearance (feet): hydraulic system, tire size, etc.
MSL/NSL - 8.7
Digging Depth (inches): *See model compatibilty chart for full
MSL/NSL - 6.3 tractor model compatibility.
Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 2,882 NOTE: IMPORTANT ORDERING
NSL - 2,354 INFORMATION
Breakout Force @ 800mm from bucket - This loader is compatible with the
pivot point (lbs.): MSL - 3,498 Factory Installed Mid Mounted Valves or
NSL - 3,982 the Loader Mounted Valves offered
Reach @ Maximum Lift (inches): with this loader.
MSL/NSL - 36.6
Reach @ Ground Level (inches): LOADER COMPONENTS:
MSL/NSL - 89.0 Order the following to make up a
Bucket Rollback Angle (degrees): complete Model 640TL Quick-Attach
MSL/NSL - 44 Loader:
Bucket Dump Angle (degrees): - (A) Basic Packaged Loader Non Self-
MSL/NSL - 49 Leveling Package: Includes boom, 4-bar
bucket linkage, bucket level indicator
Page 22 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
Standard Equipment
and parking stands. - (D) Bucket(s) and Attachments
Self-Leveling Package: Includes boom, - (E) Extra Equipment
MSL linkage, 4-bar bucket linkage, - (F) Miscellaneous
bucket level indicator and parking
stands. WARRANTY
- (B) Mounting Kit New Holland - 1 Year Warranty
- (C) Hydraulic Components: Loader
Mounted loader valve or Mid Mounted
loader valve ordered as FIO on tractor
and hydraulic hose package (included
with Loader Mounted loader valve).
Page 23 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
640TL Euro Style Non Self Leveling 1,746 LB $4,208.00
640TL Euro Style Mechanical Self Leveling 1,976 LB $5,238.00
640TL Skid Steer Style Non Self Leveling 1,865 LB $4,208.00
640TL Skid Steer Style Mechanical Self Leveling 1,995 LB $5,238.00
BRACKETS
Page 24 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
HYDRAULIC KITS
HOSE KITS
Page 25 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
LOADER OPTIONS
SOFT RIDE
OTHERS
MATERIAL BUCKETS
SD_K5230 BUCKET
730848 84" Std Material Bucket EUR $896.00
Euro Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730848006
730890 84" Std Material Bucket SSL $896.00
SSL Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730890006
Page 26 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
BALE HANDLING
Page 27 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 03
GRAPPLE BUCKETS
Page 28 of 42
-CP9M 03 0018 000 04-SEP-13
-CP9M 04
Standard Equipment
TS6020, TS6030, TS6.110, TS6.120 NOTE: IMPORTANT ORDERING
Standard Axle INFORMATION
Maximum Lift Height (feet): - This loader is compatible with the
MSL/NSL - 12.0 Factory Installed Mid Mounted Valves or
Dump Clearance (feet): the Loader Mounted Valves offered
MSL/NSL - 9.3 with this loader.
Digging Depth (inches):
MSL/NSL - 6.3 LOADER COMPONENTS:
Lift Capacity @ 800mm from bucket Order the following to make up a
pivot point (lbs.): MSL - 2,970 complete Model 645TL Quick-Attach
NSL - 2,398 Loader:
Breakout Force @ 800mm from bucket - (A) Basic Packaged Loader Non Self-
pivot point (lbs.): MSL - 3,476 Leveling Package: Includes boom, 4-bar
NSL - 3,894 bucket linkage, bucket level indicator
Reach @ Maximum Lift (inches): and parking stands.
MSL/NSL - 35.5 Self-Leveling Package: Includes boom,
Reach @ Ground Level (inches): MSL linkage, 4-bar bucket linkage,
MSL/NSL - 89.4 bucket level indicator and parking
Bucket Rollback Angle (degrees): stands.
MSL/NSL - 43 - (B) Mounting Kit
Bucket Dump Angle (degrees): - (C) Hydraulic Components: Loader
MSL/NSL - 49 Mounted loader valve or Mid Mounted
loader valve ordered as FIO on tractor
*The Loader specifications provided and hydraulic hose package (included
are general specifications and with Loader Mounted loader valve).
may vary based on tractor model, - (D) Bucket(s) and Attachments
hydraulic system, tire size, etc. - (E) Extra Equipment
- (F) Miscellaneous
*See model compatibilty chart for full
tractor model compatibility. WARRANTY
New Holland - 1 Year Warranty
Page 29 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 04
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
645TL Euro Style Non Self Leveling 1,906 LB $4,717.00
645TL Euro Style Mechanical Self Leveling 2,036 LB $5,747.00
645TL Skid Steer Style Non Self Leveling 1,925 LB $4,717.00
645TL Skid Steer Style Mechanical Self Leveling 2,055 LB $5,747.00
BRACKETS
HYDRAULIC KITS
Page 30 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 04
HOSE KITS
LOADER OPTIONS
SOFT RIDE
Page 31 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 04
OTHERS
MATERIAL BUCKETS
SD_K5230 BUCKET
730848 84" Std Material Bucket EUR $896.00
Euro Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730848006
730890 84" Std Material Bucket SSL $896.00
SSL Style - 83" 19 cu. ft. Standard Material Bucket
0.71 yd struck capacity, 0.88 yd heaped capacity
730890006
Page 32 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 04
BALE HANDLING
Page 33 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 04
GRAPPLE BUCKETS
Page 34 of 42
-CP9M 04 0018 000 04-SEP-13
-CP9M 06
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
630TL Euro Style Non Self Leveling 1,616 LB $3,280.00
630TL Euro Style Mechanical Self Leveling 1,761 LB $4,310.00
630TL Skid Steer Style Non Self Leveling 2,100 LB $3,280.00
630TL Skid Steer Style Mechanical Self Leveling 1,780 LB $4,310.00
635TL Euro Style Non Self Leveling 1,741 LB $3,586.00
635TL Euro Style Mechanical Self Leveling 1,866 LB $4,616.00
635TL Skid Steer Style Non Self Leveling 1,760 LB $3,586.00
635TL Skid Steer Style Mechanical Self Leveling 1,885 LB $4,616.00
640TL Euro Style Non Self Leveling 1,746 LB $4,208.00
640TL Euro Style Mechanical Self Leveling 1,976 LB $5,238.00
640TL Skid Steer Style Non Self Leveling 1,865 LB $4,208.00
640TL Skid Steer Style Mechanical Self Leveling 1,995 LB $5,238.00
645TL Euro Style Non Self Leveling 1,906 LB $4,717.00
645TL Euro Style Mechanical Self Leveling 2,036 LB $5,747.00
645TL Skid Steer Style Non Self Leveling 1,925 LB $4,717.00
645TL Skid Steer Style Mechanical Self Leveling 2,055 LB $5,747.00
Page 35 of 42
-CP9M 06 0018 000 04-SEP-13
-CP9M 06
Pallet Forks
730849006 38IN PF 55W 2200LB EURO 270 KG $973.00
Euro Style - Pallet Fork
38" fork, 55" wide 2,200 lb capacity
(Same as 730849)
Bale Handling
715106026 Bale spike 132 KG $994.00
SSL Style - Bale Spike
(one long tine and one short tine maintains bale control)
(Same as 715106)
Page 36 of 42
-CP9M 06 0018 000 04-SEP-13
-CP9M 06
Grapple Buckets
716983046 Bolt-on Grapple 200 KG $2,787.00
Bolt on Grapple Assembly Kit
3 Grapple Claws
(Handles up to 5' diameter Round Bale)
Only Compatible with High Capacity Buckets
(730403, 730404, 717417, 717419, 730403006,
730404006, 717417006, 717419006)
(Same as 716983)
Other
716653196 Faceplate SSL-Black 175 KG $979.00
Complete SSL Style Faceplate (Black)
730887006 Faceplate Euro-Black 175 KG $979.00
Complete Euro Style Faceplate (Black)
Page 37 of 42
-CP9M 06 0018 000 04-SEP-13
-CP9M 07
Models
COMMERCIAL SPECIALTY LEVELING Weight List Price
MODEL
630TL Euro Style Non Self Leveling 1,616 LB $3,280.00
630TL Euro Style Mechanical Self Leveling 1,761 LB $4,310.00
630TL Skid Steer Style Non Self Leveling 2,100 LB $3,280.00
630TL Skid Steer Style Mechanical Self Leveling 1,780 LB $4,310.00
635TL Euro Style Non Self Leveling 1,741 LB $3,586.00
635TL Euro Style Mechanical Self Leveling 1,866 LB $4,616.00
635TL Skid Steer Style Non Self Leveling 1,760 LB $3,586.00
635TL Skid Steer Style Mechanical Self Leveling 1,885 LB $4,616.00
640TL Euro Style Non Self Leveling 1,746 LB $4,208.00
640TL Euro Style Mechanical Self Leveling 1,976 LB $5,238.00
640TL Skid Steer Style Non Self Leveling 1,865 LB $4,208.00
640TL Skid Steer Style Mechanical Self Leveling 1,995 LB $5,238.00
645TL Euro Style Non Self Leveling 1,906 LB $4,717.00
645TL Euro Style Mechanical Self Leveling 2,036 LB $5,747.00
645TL Skid Steer Style Non Self Leveling 1,925 LB $4,717.00
645TL Skid Steer Style Mechanical Self Leveling 2,055 LB $5,747.00
Page 38 of 42
-CP9M 07 0018 000 04-SEP-13
-CP9M 07
Front Brackets
730867006 Mnt kit-utility LT 146 KG $1,210.00
T4020 & T4030 Standard Axle
(does NOT include grill guard)
(Same as 730867)
730869006 Mnt kit-utility med 159 KG $1,210.00
T4040 & T4050 Standard Axle,
TN85A/DA, TN95A/DA (4 cylinder) Standard Axle
(does NOT include grill guard)
(Same as 730869)
Rear Brackets
717685006 Rear Brackets 75 KG $641.00
T4020 & T4030 Standard Axle
(Same as 717685)
730656006 Rear Brackets 145 KG $641.00
T4040 & T4050 Standard Axle,
TNA/TNDA Series (4 cylinder) Standard Axle
(Same as 730656)
Page 39 of 42
-CP9M 07 0018 000 04-SEP-13
-CP9M 07
Complete TPS
713691006 MNTG KIT-MED JESI 367 KG $1,403.00
T4.85, T4.95, T4.105 Jesi Production
Horizontial TPS Sideframe and Vertical TPS Upright
Does NOT inlclude grill guard (715824306)
Same as 713691
730878006 Mnt kt-utilty dlx A3 230 KG $1,403.00
TD5050, TD95D
Horizontal TPS Sideframe and Vertical TPS Upright
does NOT include grill guard uprights (715824266)
(Same as 730878)
730881006 Mnt kt-APL prem 203 KG $1,403.00
T5000 Series, TLA Series
Horizontal TPS Sideframe and Vertical TPS Upright
does NOT include grill guard uprights (715824256)
(Same as 730881)
730884006 Complete TPS Mount 220 KG $1,957.00
TS6, TS6000 Series
(Horizontal TPS Sideframe and Vertical TPS Upright
does NOT include grill guard)
(Same as 730884)
730885006 Mount Kit APH Complete 200 LB No Charge
TS6.110 & TS6.120
Horizontial TPS Sideframe and Vertical TPS Upright
(does NOT include grill guard)
same as 730885
Hose Kits
713680006 Hose Kit - Utility 75 24 KG $238.00
For T4.75, T4.85, T4.95, T4.105 tractor mounted valve
(same as 713680)
716880016 Hose kit-utility 11 KG $268.00
2 Function Mid Mounted Valve Hose Kit
T4000 Series, TNA Series
(Same as 716880)
730893006 Hose Kit - APL Prem 11 KG $268.00
2 Function Mid Mounted Valve Hose Kit
T5000 Series, TLA Series
(Same as 730893)
Page 40 of 42
-CP9M 07 0018 000 04-SEP-13
-CP9M 07
3 Function Diverter
730685006 3rd Function Diverter 32 KG $901.00
3rd Function Diverter Valve for
Non Self Leveling Loaders
(Same as 730685)
717565006 Joystick adapting kit for 3rd function 2 KG $159.00
Joystick handle kit includes new knob/push button
and required wiring. Electrical options:
- 3rd function diverter valve (730684, 730685,
730684006 or 730685006)
- Reference joystick handle kit description for DIA kits which
include the joystick handle kit.
NOTE: Required to operate 3rd function diverter when
tractor has a Factory Installed Joystick
(Same as 717565)
730684006 3rd Function Diverter_ 23 KG $901.00
3rd Function Diverter Valve for
Mechanical Self Leveling Loaders
(Same as 730684)
Soft Ride
730755006 Soft Ride 730755 11 KG $697.00
Soft Ride Kit
(Same as 730755)
Grill Guards
715824226 Grill Guard-Utility 15 KG $252.00
Grill Guard for T4000 Series, TNA/DA Series
715824306 Grille gd med Utility 35 KG $259.00
Vertical uprights for T4.75, T4.85, T4.95, T4.105
does not include grill guard insert which is 715824136
715824266 Grill Guard-Utility Deluxe 15 KG $252.00
Grill Guard for TD5000 Series, TD75D, TD80D, TD95D
715824256 Grill Guard-APL Premium 18 KG $252.00
Grill Guard for T5000 Series & TLA Series
715824286 Grill Guard 110/120 56 KG $252.00
Grill Guard for TS6000, TS6. Series
Page 41 of 42
-CP9M 07 0018 000 04-SEP-13
-CP9M 07
Other
717747006 Ballast box 1000 Lb Max 169 KG $629.00
Ballasting Box
Maximum 1,000 lbs capacity
(Same as 717747)
717748006 Ballast box 1500 Lb Max 243 KG $837.00
Ballasting Box
Maximum 1,500 lbs capacity
(Same as 717748)
Pallet Forks
713669006 48IN FK 55W 2200 EURO 270 LB $863.00
EURO Style - Pallet Fork
48" fork, 55" wide 2,200 lb capacity
630TL thru 645TL
713670006 48IN Fork 55IN Wide 2200 LB Cap SSL 270 LB $863.00
SS Style - Pallet Fork
48" fork, 55" wide 2,200 lb capacity
615TL/625TL
630TL thru 645TL
713672006 48IN Fork 55IN Wide 3500 LB Cap SSL 355 LB $950.00
SS Style - Pallet Fork
48" fork, 55" wide 2,200 lb capacity
630TL thru 645TL
Page 42 of 42
-CP9M 07 0018 000 04-SEP-13
IMPLEMENTS - "LARGE LOADERS" INDEX
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 09/01/13 1
Page 1 of 134
Farm Loader Compatibility
COMPATIBILITY
Platform Axle Configuration Self Leveling Option
Q-A Loader
N=Non Self-Leveling
Series
M=Mechanical
Tractor Model ROPS CAB 2WD FWD TerraglideTM FWD SuperSteerTM FWD
Page 2 of 134
Lift Cylinder & Frame Width Specifications
LOADER MODEL LIFT CYLINDERS BUCKET CYLINDERS LOADER FRAME WIDTH
Diameter (piston) Stroke Diameter (piston) Stroke (centerline)
in. mm in. mm in. mm in. mm in. mm
815 NSL 2.75 70 19.29 490 2.95 75 20.87 530 40.94 1040
815 MSL 2.55 65 19.29 490 2.95 75 15.94 405 40.94 1040
825 NSL 2.95 75 20.87 530 2.95 75 20.87 530 40.94 1040
825 MSL 2.55 65 20.87 530 2.95 75 18.11 460 40.94 1040
835 NSL 3.15 80 20.87 530 3.15 80 22.44 570 40.94 1040
835 MSL 2.95 75 20.87 530 3.15 80 18.11 460 40.94 1040
845 NSL 3.34 85 20.87 530 3.15 80 22.44 570 40.94 1040
845 MSL 3.15 80 20.87 530 3.15 80 18.11 460 40.94 1040
855 NSL 3.54 90 22.44 570 3.34 85 22.44 570 40.94 1040
855 MSL 3.34 85 22.44 570 3.34 85 18.11 460 40.94 1040
3.54 90 22.44 570 3.54 90 18.11 460 40.94 1040
865 MSL or or or or
3.74 95 22.44 570 3.93 100 18.11 460 40.94 1040
875 MSL 3.74 95 27.36 695 3.35/1.57 85/40 18.11 460 47.24 1200
885 MSL 3.93 100 26.22 666 3.93 100 18.11 460 55.12 1400
NSL = Less Mechanical Self‐Leveling
MSL = With Mechanical Self‐Leveling
Page 3 of 134
-CP9N 01
Standard Equipment
T4030F and T4040F T4020 and T4030
Standard Axle Standard Axle
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSL/NSL - 10.3 MSL/NSL - 10.5
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 7.1 MSL/NSL - 7.3
Digging Depth (inches): Digging Depth (inches):
MSL/NSL - 6.7 MSL/NSL - 5.1
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 3,124 pivot point (lbs.): MSL - 3,124
NSL - 2,772 NSL - 2,772
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 3,300 pivot point (lbs.): MSL - 3,300
NSL - 2,948 NSL - 2,948
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL - 35.1 MSL/NSL - 31.5
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL - 86.3 MSL/NSL - 92.6
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL/NSL - 47 MSL/NSL - 42
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 60 MSL/NSL - 62
Page 4 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
Standard Equipment
*The Loader specifications provided LOADER COMPONENTS:
are general specifications and Order the following to make up a
may vary based on tractor model, complete Model 815TL Quick-Attach
hydraulic system, tire size, etc. Loader:
- (A) Basic Packaged Loader Non Self-
*See model compatibilty chart for full Leveling Package: Includes boom, 4-bar
tractor model compatibility. bucket linkage, bucket level indicator,
parking stands and flat face hose
NOTE: IMPORTANT ORDERING couplers.
INFORMATION Self-Leveling Package: Includes boom,
- T4000F & T4000 Series tractors MSL linkage, 4-bar bucket linkage,
must be equipped with a mid mounted bucket level indicator, parking
or loader mounted valve and joystick stands and flat face hose couplers
to operate the Model 815TL loader. - (B) Mounting Kit
The mid mounted valve and joystick is - (C) Hydraulic Components: Loader
available as a Factory Installed Option Mounted loader valve or Mid Mounted
or throught CNH Parts. loader valve ordered as FIO on tractor
and hydraulic hose package (included
- CORE - Depot Stock with Loader Mounted loader valve).
- NON CORE - Factory Order - 3 months - (D) Bucket(s) and Attachments
- (E) Extra Equipment
- (F) Miscellaneous
WARRANTY
New Holland - 2 Year Warranty
Models
Page 5 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
SD_MD MODEL
815TL 815TL No Charge
BASE LOADER
BRACKETS
Page 6 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
REAR BRACKETS
HYDRAULIC KITS
T4000F Series
713616006
Page 7 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
713618006
713621 2 Function Multi Coupler $477.00
2 Funtion Multi Coupler Cap
Includes:
Multi Coupler 4 cap
Requires:
Loader mounted Loader Control Valve (LCV)
713621006
Page 8 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
OTHERS
Page 9 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
LOADER OPTIONS
SOFT RIDE
Page 10 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
MATERIAL BUCKETS
Page 11 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
BALE HANDLING
Page 12 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
GRAPPLE BUCKETS
OTHER
Page 13 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 01
Page 14 of 134
-CP9N 01 0018 000 04-SEP-13
-CP9N 02
Standard Equipment
T4020 and T4030
Maximum Lift Height (feet): T4030 - SuperSteer Axle
MSL/NSL - 11.3 Maximum Lift Height (feet):
Dump Clearance (feet): MSL/NSL - 11.3
MSL/NSL - 8.1 Dump Clearance (feet):
Digging Depth (inches): MSL/NSL - 8.1
MSL/NSL - 5.5 Digging Depth (inches):
Lift Capacity @ 800mm from bucket MSL/NSL - 5.1
pivot point (lbs.): MSL - 2,948 Lift Capacity @ 800mm from bucket
NSL - 3,366 pivot point (lbs.): MSL - 2,948
Breakout Force @ 800mm from bucket NSL - 3,366
pivot point (lbs.): MSL - 3,278 Breakout Force @ 800mm from bucket
NSL - 3,542 pivot point (lbs.): MSL - 3,278
Reach @ Maximum Lift (inches): NSL - 3,542
MSL/NSL - 29.2 Reach @ Maximum Lift (inches):
Reach @ Ground Level (inches): MSL/NSL - 37.4
MSL/NSL - 100.1 Reach @ Ground Level (inches):
Bucket Rollback Angle (degrees): MSL/NSL - 90.6
MSL/NSL - 47 Bucket Rollback Angle (degrees):
Bucket Dump Angle (degrees): MSL/NSL - 47
MSL/NSL - 54 Bucket Dump Angle (degrees):
MSL/NSL - 54
Page 15 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
Standard Equipment
T4.85, T4.95, T4.105 (4WD) TD5050
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSl/NSL - 11.2 Update MSL/NSL - 11.4
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 8.1 Update MSL/NSL - 8.3
Digging Depth (inches): Digging Depth (inches):
MSL/NSL – 7.1 MSL/NSL - 4.3
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL – 3,064 pivot point (lbs.): MSL - 2,954
NSL – 2,623 NSL - 3,366
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 3,196 pivot point (lbs.): MSL - 3,278
NSL – 2,910 NSL - 3,542
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL – 35.4 MSL/NSL - 30.7
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL – 90.5 MSL/NSL - 89.8
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL/NSL - 43 MSL/NSL - 44
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 60 MSL/NSL - 57
Page 16 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
Standard Equipment
*The Loader specifications provided complete Model 825TL Quick-Attach
are general specifications and Loader:
may vary based on tractor model, - (A) Basic Packaged Loader Non Self-
hydraulic system, tire size, etc. Leveling Package: Includes boom, 4-bar
bucket linkage, bucket level indicator
*See model compatibilty chart for full and parking stands. Self-Leveling
tractor model compatibility. Package: Includes boom,
MSL linkage, 4-bar bucket linkage,
NOTE: IMPORTANT ORDERING bucket level indicator and parking
INFORMATION stands.
- T4000, T5000, T5 & TD5000 Series
tractors must be equipped with a mid - (B) Mounting Kit
mounted or loader mounted valve and - (C) Hydraulic Components: Loader
joystick to operate the Model 825TL Mounted loader valve or Mid Mounted
loader. The mid mounted valve and loader valve ordered as FIO on tractor
joystick is available as a Factory Installed and hydraulic hose package (included
Option or through CNH Parts. with Loader Mounted loader valve).
- (D) Bucket(s) and Attachments
- CORE - Depot Stock - (E) Extra Equipment
- NON CORE - Factory Order - 3 months - (F) Miscellaneous
WARRANTY
New Holland - 2 Year Warranty
LOADER COMPONENTS:
Order the following to make up a
Models
Page 17 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
SD_MD MODEL
825TL 825TL $657.00
BASE LOADER
Page 18 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
BRACKETS
Page 19 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
REAR BRACKETS
Page 20 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
HYDRAULIC KITS
TD5000
713617006
T5000 Series
T4.85, T4.95, T4.105 Jesi Production
717517056
713689 MMV Hydraulic Hose Kit-2 func $513.00
2 Function Hose Kit for Tractor Mounted Loader Valve
Includes:
4 flat face female couplers and 4 hoses to tractor loader valve
T5 Series
(Same as 713689006)
Page 21 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
T5 Series
713687006
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
713618006
713621 2 Function Multi Coupler $477.00
2 Funtion Multi Coupler Cap
Includes:
Multi Coupler 4 cap
Requires:
Loader mounted Loader Control Valve (LCV)
713621006
Page 22 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
OTHERS
Page 23 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
LOADER OPTIONS
SOFT RIDE
Page 24 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
MATERIAL BUCKETS
Page 25 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
Page 26 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
BALE HANDLING
Page 27 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 02
GRAPPLE BUCKETS
OTHER
Page 28 of 134
-CP9N 02 0018 000 04-SEP-13
-CP9N 03
Standard Equipment
TD5050 TS6 Series - 4 Cyl
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSL/NSL - 12.1 MSL/NSL - 12.3
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 9.0 MSL/NSL - 9.2
Digging Depth (inches): Digging Depth (inches):
MSL/NSL - 6.3 MSL/NSL - 4.7
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 3,674 pivot point (lbs.): MSL - 3,131
NSL - 3,476 NSL - 2,932
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 4,092 pivot point (lbs.): MSL - 3,836
NSL - 3,718 NSL - 3,549
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL - 30.7 MSL/NSL - 33.5
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL - 93.8 MSL/NSL - 92.1
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL/NSL - 45 MSL/NSL - 46
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 58 MSL/NSL - 59
Page 29 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Standard Equipment
T6 / T6000 Delta, Plus, Elite - 4 Cyl NOTE: IMPORTANT ORDERING
Standard Axle INFORMATION
Maximum Lift Height (feet): - T5000, TD5000, TS6000, T6 & T6000
MSL/NSL - 12.2 Series tractors must be equipped
Dump Clearance (feet): with a mid mounted or loader mounted
MSL/NSL - 9.1 valve and joystick to operate the Model
Digging Depth (inches): 835TL loader. The mid mounted valve
MSL/NSL - 5.9 and joystick is available as a Factory
Lift Capacity @ 800mm from bucket Installed Option or through CNH Parts.
pivot point (lbs.): MSL - 3,806 - CORE - Depot Stock
NSL - 3,608 - NON CORE - Factory Order - 3 months
Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 4,246 LOADER COMPONENTS:
NSL - 3,850 Order the following to make up a
Reach @ Maximum Lift (inches): complete Model 835TL Quick-Attach
MSL/NSL - 39.1 Loader:
Reach @ Ground Level (inches): - (A) Basic Packaged Loader Non Self-
MSL/NSL - 91.8 Leveling Package: Includes boom, 4-bar
Bucket Rollback Angle (degrees): bucket linkage, bucket level indicator
MSL/NSL - 42 and parking stands. Self-Leveling
Bucket Dump Angle (degrees): Package: Includes boom, MSL linkage,
MSL/NSL - 61 4-
bar bucket linkage, bucket level indicator
*The Loader specifications provided and parking stands.
are general specifications and - (B) Mounting Kit
may vary based on tractor model, - (C) Hydraulic Components: Loader
hydraulic system, tire size, etc. Mounted loader valve or Mid Mounted
loader valve ordered as FIO on tractor
*See model compatibilty chart for full and hydraulic hose package (included
tractor model compatibility. with Loader Mounted loader valve).
- (D) Bucket(s) and Attachments
- (E) Extra Equipment
- (F) Miscellaneous
WARRANTY
New Holland - 2 Year Warranty
Models
Page 30 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
SD_MD MODEL
835TL 835TL $1,889.00
BASE LOADER
BRACKETS
Page 31 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Page 32 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
REAR BRACKETS
HYDRAULIC KITS
TS6000 Series
730804016
713633 2 Func Electro-Hydraulic Kit $3,167.00
2 Function Electronic Loader Mounted Valve Kit
Includes:
Joystick
2 function electronic loader mounted Loader Control Valve (LCV)
2 hoses from tractor to loader control valve
4 flat face female couplers and hoses to loader
Page 33 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Requires:
CCLS tractor hydraulics
3rd function live hose kit
TD5000
713617006
713640 Hyd Valve Kit 713640 $1,505.00
2 Function loader mounted valve, joystick, and hose kit
Includes:
Joystick
Loader mounted Loader Control Valve(LVC)
4 male flat face couplers integrated into the Loader Control Valve
2 hoses running from tractor to the Loader Control Valve
TS6 Series
713640006
Page 34 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
T5000 Series
T4.85, T4.95, T4.105 Jesi Production
717517056
713689 MMV Hydraulic Hose Kit-2 func $513.00
2 Function Hose Kit for Tractor Mounted Loader Valve
Includes:
4 flat face female couplers and 4 hoses to tractor loader valve
T5 Series
(Same as 713689006)
717518 Mech MMV Hyd Hose Kit 2 func $513.00
2 Function Hose Kit for Tractor Mounted Loader Valve
Includes:
4 flat face couplers and 4 hoses to tractor loader valve
T5000 Series
730899006
Page 35 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
T5 Series
713687006
713609 2 Func Mech MMV Hyd Hose Kit $732.00
2 function hose kit with Multi Coupler
Includes:
Multi-Coupler 4 base and 4 hoses to tractor mounted loader valve
Page 36 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
713618006
713620 Basic 3 Function Multi Coupler $909.00
3 function Multi Coupler Kit
Includes:
Multi Coupler 4 base
Mulit Coupler 4 cap
Multi Coupler 2 base (for live 3rd function)
Multi Coupler 2 cap (for live 3rd function)
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve with 3rd slice
3rd function live hose kit for the loader
713620006
Page 37 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Requires:
Loader mounted Loader Control Valve (LCV)
713621006
Page 38 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Page 39 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
OTHERS
same as 713661006
Page 40 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
LOADER OPTIONS
SOFT RIDE
Page 41 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
MATERIAL BUCKETS
Page 42 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Page 43 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
BALE HANDLING
GRAPPLE BUCKETS
Page 44 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
Page 45 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 03
OTHER
Page 46 of 134
-CP9N 03 0018 000 04-SEP-13
-CP9N 04
Standard Equipment
T6 / T6000 Delta, Plus, Elite - 4 Cyl T6 / T6000 Delta, Plus, Elite - 6 Cyl
SuperSteer SuperSteer
Maximum Lift Height (feet): Maximum Lift Height (feet):
MSL/NSL - 13.0 MSL/NSL - 13.0
Dump Clearance (feet): Dump Clearance (feet):
MSL/NSL - 9.8 MSL/NSL - 9.9
Digging Depth (inches): Digging Depth (inches):
MSL/NSL - 7.1 MSL/NSL - 7.1
Lift Capacity @ 800mm from bucket Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 4,686 pivot point (lbs.): MSL - 4,686
NSL - 3,938 NSL - 3,938
Breakout Force @ 800mm from bucket Breakout Force @ 800mm from bucket
pivot point (lbs.): MSL - 5,346 pivot point (lbs.): MSL - 5,346
NSL - 4,136 NSL - 4,136
Reach @ Maximum Lift (inches): Reach @ Maximum Lift (inches):
MSL/NSL - 39.8 MSL/NSL - 39.8
Reach @ Ground Level (inches): Reach @ Ground Level (inches):
MSL/NSL - 102.0 MSL/NSL - 100.9
Bucket Rollback Angle (degrees): Bucket Rollback Angle (degrees):
MSL - 46 NSL - 45 MSL/NSL - 45
Bucket Dump Angle (degrees): Bucket Dump Angle (degrees):
MSL/NSL - 56 MSL/NSL - 57
Page 47 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Standard Equipment
*The Loader specifications provided LOADER COMPONENTS:
are general specifications and Order the following to make up a
may vary based on tractor model, complete Model 845TL Quick-Attach
hydraulic system, tire size, etc. Loader:
- (A) Basic Packaged Loader Non Self-
*See model compatibilty chart for full Leveling Package: Includes boom, 4-bar
tractor model compatibility. bucket linkage, bucket level indicator
and parking stands. Self-Leveling
NOTE: IMPORTANT COMPATIBILITY Package: Includes boom,
INFORMATION MSL linkage, 4-bar bucket linkage,
- Loader is compatible with front bucket level indicator and parking
fenders. stands.
See Operator's Manual for additional - (B) Mounting Kit
information or restrictions. - (C) Hydraulic Components: Loader
- Front axle oscillation stops are included Mounted loader valve or Mid Mounted
with the loader mounting kit (if loader valve ordered as FIO on tractor
required). and hydraulic hose package (included
- Loader is not compatible with 16.9R30 with Loader Mounted loader valve).
front tires - (D) Bucket(s) and Attachments
- (E) Extra Equipment
NOTE: IMPORTANT ORDERING - (F) Miscellaneous
INFORMATION
- T6 & T6000 Series tractors WARRANTY
must be equipped with a mid mounted New Holland - 2 Year Warranty
or loader mounted valve and joystick to
operate the Model 845TL loader. The mid
mounted valve and joystick is available
as a Factory Installed Option or
through CNH Parts.
Models
Page 48 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
SD_MD MODEL
845TL 845TL $2,822.00
BASE LOADER
Page 49 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
BRACKETS
Page 50 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
HYDRAULIC KITS
Requires:
CCLS tractor hydraulics
3rd function live hose kit
Page 51 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
TS6 Series
713640006
Page 52 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Page 53 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
713618006
713620 Basic 3 Function Multi Coupler $909.00
3 function Multi Coupler Kit
Includes:
Multi Coupler 4 base
Mulit Coupler 4 cap
Multi Coupler 2 base (for live 3rd function)
Multi Coupler 2 cap (for live 3rd function)
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve with 3rd slice
3rd function live hose kit for the loader
713620006
Page 54 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Requires:
Loader mounted Loader Control Valve (LCV)
713621006
713611 3 Function Multi Coupler $391.00
3rd function Multi Coupler Cap
Includes:
Multi Coupler 2 cap (for live 3rd function)
Requires:
3rd function live hoses with flat face coupler kit for the loader
Loader mounted Loader Control Valve (LCV)
713611006
Page 55 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Page 56 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
OTHERS
same as 713661006
Page 57 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
LOADER OPTIONS
SOFT RIDE
Page 58 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
MATERIAL BUCKETS
Page 59 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
Page 60 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
BALE HANDLING
GRAPPLE BUCKETS
Page 61 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 04
OTHER
Page 62 of 134
-CP9N 04 0018 000 04-SEP-13
-CP9N 05
Standard Equipment
T6 / T6000 Delta, Plus, Elite - 6 Cyl T7.170-210 & T6000
Standard Axle RangeCommand/PowerCommand
Maximum Lift Height (feet): Standard Axle
MSL/NSL - 13.8 Maximum Lift Height (feet):
Dump Clearance (feet): MSL/NSL - 13.9
MSL/NSL - 10.7 Dump Clearance (feet):
Digging Depth (inches): MSL/NSL - 10.7
MSL/NSL - 6.7 Digging Depth (inches):
Lift Capacity @ 800mm from bucket MSL/NSL - 6.3
pivot point (lbs.): MSL - 5,720 Lift Capacity @ 800mm from bucket
NSL - 4,752 pivot point (lbs.): MSL - 5,522
Breakout Force @ 800mm from bucket NSL - 4,567
pivot point (lbs.): MSL - 5,962 Breakout Force @ 800mm from bucket
NSL - 4,730 pivot point (lbs.): MSL - 5,742
Reach @ Maximum Lift (inches): NSL - 4,576
MSL/NSL - 35.1 Reach @ Maximum Lift (inches):
Reach @ Ground Level (inches): MSL/NSL - 31.5/31.9
MSL/NSL - 109.1 Reach @ Ground Level (inches):
Bucket Rollback Angle (degrees): MSL/NSL - 108.4
MSL/NSL - 45# Bucket Rollback Angle (degrees):
Bucket Dump Angle (degrees): MSL/NSL - 44#
MSL/NSL - 52 Bucket Dump Angle (degrees):
MSL/NSL - 52
T6 / T6000 Delta, Plus, Elite - 6 Cyl
SuperSteer Axle *The Loader specifications provided
Maximum Lift Height (feet): are general specifications and
MSL/NSL - 13.8 may vary based on tractor model,
Dump Clearance (feet): hydraulic system, tire size, etc.
MSL/NSL - 10.7
Digging Depth (inches): *See model compatibilty chart for full
MSL/NSL - 6.7 tractor model compatibility.
Lift Capacity @ 800mm from bucket
pivot point (lbs.): MSL - 5,720 NOTE: IMPORTANT COMPATIBILITY
NSL - 4,752 INFORMATION
Breakout Force @ 800mm from bucket - Not compatible with T6000 Elite
pivot point (lbs.): MSL - 5,962 AutoShift.
NSL - 4,730 - Loader is compatible with front
Reach @ Maximum Lift (inches): fenders.
MSL/NSL - 35.1 See Operator's Manual for additional
Reach @ Ground Level (inches): information or restrictions.
MSL/NSL - 104.4 - Front axle oscillation stops are included
Bucket Rollback Angle (degrees): with the loader mounting kit (if
MSL/NSL - 45# required).
Bucket Dump Angle (degrees): - Loader is not compatible with 16.9R30
MSL/NSL - 52 front tires.
Page 63 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Standard Equipment
NOTE: IMPORTANT ORDERING Self-Leveling Package: Includes boom,
INFORMATION MSL linkage, 4-bar bucket linkage,
- T6, T6000, T7, & T7000 Series bucket level indicator and parking
tractors must be equipped with a mid stands.
mounted or loader mounted valve and - (B) Mounting Kit
joystick to operate the Model 855TL - (C) Hydraulic Components: Loader
loader. The mid mounted valve and Mounted loader valve or Mid Mounted
joystick loader valve ordered as FIO on tractor
is available as a Factory Installed Option and hydraulic hose package (included
or through CNH Parts. with Loader Mounted loader valve).
- CORE - Depot Stock - (D) Bucket(s) and Attachments
- NON CORE - Factory Order - 3 months - (E) Extra Equipment
- (F) Miscellaneous
LOADER COMPONENTS:
Order the following to make up a WARRANTY
complete Model 855TL Quick-Attach New Holland - 2 Year Warranty
Loader:
- (A) Basic Packaged Loader Non Self-
Leveling Package: Includes boom, 4-bar
bucket linkage, bucket level indicator
and parking stands.
Models
COMMERCIAL MODEL MODEL Weight List Price
855TL 855TL 4,254 LB $7,155.00
Page 64 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
SD_MD MODEL
855TL 855TL $3,524.00
BASE LOADER
726436046
726434 MSL SuperSteer 726434 $2,595.00
NON CORE
Euro Style Quick Attach
Multi Coupler 4 cap with 4 loader side hoses
SuperSteer™
726434046
726395 MSL 726395 $2,595.00
CORE
Euro Style Quick Attach
Multi Coupler 4 cap with 4 loader side hoses
726395046
726428 MSL SftRd/3LH 726428 $3,961.00
CORE
Euro Style Quick Attach
with Soft Ride / 3rd Live Hose /
Multi Coupler 4 cap with 4 loader side hoses and
Multi Coupler 2 cap with 2 loader side hoses
726428046
Page 65 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
BRACKETS
715453016
715451 Front mounting brackets 715451 $2,640.00
T7030, T7040, T7050, T7060, T7070
Standard and SuperSteer Axles
715451116
Vertical TPS Upright
730898 Aph 6 Cyl Std T4 Vertical $1,531.00
T6.155, T6.165, T6.175
Standard and SuperSteer Axles
(Vertical TPS Upright with grill guard to complete
factory installed Horizontal Sideframes)
730898006
Page 66 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
Page 67 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
REAR BRACKETS
HYDRAULIC KITS
Requires:
CCLS tractor hydraulics
3rd function live hose kit
Page 68 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Page 69 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Page 70 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
713618006
Page 71 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve with 3rd slice
3rd function live hose kit for the loader
713620006
713621 2 Function Multi Coupler $477.00
2 Funtion Multi Coupler Cap
Includes:
Multi Coupler 4 cap
Requires:
Loader mounted Loader Control Valve (LCV)
713621006
713611 3 Function Multi Coupler $391.00
3rd function Multi Coupler Cap
Includes:
Multi Coupler 2 cap (for live 3rd function)
Requires:
3rd function live hoses with flat face coupler kit for the loader
Loader mounted Loader Control Valve (LCV)
713611006
Page 72 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Page 73 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
OTHERS
same as 713661006
Page 74 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
LOADER OPTIONS
SOFT RIDE
Page 75 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
MATERIAL BUCKETS
Page 76 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Page 77 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
BALE HANDLING
GRAPPLE BUCKETS
Page 78 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
Page 79 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 05
OTHER
Page 80 of 134
-CP9N 05 0018 000 04-SEP-13
-CP9N 06
Standard Equipment
T7.220 - T270 & T7030 - T7070 - The following front and rear loader
Standard Axle mounting brackets will support your
Maximum Lift Height (feet): loader installation.
MSL - 14.9
Dump Clearance (feet): Important: T7 & T7000 Series
MSL - 11.7 tractors must be equipped with a mid
Digging Depth (inches): mounted valve and joystick to operate
MSL - 6.3 the Model 865TL loader. The
Lift Capacity @ 800mm from bucket mid mounted valve and joystick are
pivot point (lbs.): MSL - 4,774 available as a Factory Installed Option
Breakout Force @ 800mm from bucket or through CNH Parts.
pivot point (lbs.): MSL - 5,434
Reach @ Maximum Lift (inches): - CORE - Depot Stock
MSL - 32.3 - NON CORE - Factory Order - 3 months
Reach @ Ground Level (inches):
MSL - 113.1 LOADER COMPONENTS:
Bucket Rollback Angle (degrees): Order the following to make up a
MSL - 43# complete Model 865TL Quick-Attach
Bucket Dump Angle (degrees): Loader:
MSL - 53 - (A) Basic Packaged Loader Self-
Leveling Package: Includes boom, MSL
*The Loader specifications provided linkage, multi-coupler 4, 4-bar bucket
are general specifications and linkage, bucket level indicator and
may vary based on tractor model, parking stands.
hydraulic system, tire size, etc. - (B) Mounting Kit
*See model compatibilty chart for full - (C) Hydraulic Components:
tractor model compatibility. Mid Mounted loader valve ordered as FIO
on tractor and hydraulic hose package.
NOTE: IMPORTANT ORDERING - (D) Bucket(s) and Attachments
INFORMATION - (E) Extra Equipment
- T7.000 and T7000 series tractors - (F) Miscellaneous
offer a factory installed rear loader
mounting bracket option (without WARRANTY
ordering mid mounted valves). New Holland - 2 Year Warranty
Models
COMMERCIAL MODEL MODEL Weight List Price
865TL 865TL 3,791 LB $9,809.00
Page 81 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
SD_MD MODEL
865TL 865TL $6,178.00
BASE LOADER
Page 82 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
BRACKETS
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
Page 83 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
REAR BRACKETS
HYDRAULIC KITS
Page 84 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
OTHERS
same as 713661006
Page 85 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
LOADER OPTIONS
SOFT RIDE
Page 86 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
MATERIAL BUCKETS
Page 87 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
BALE HANDLING
Page 88 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
GRAPPLE BUCKETS
Page 89 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 06
OTHER
Page 90 of 134
-CP9N 06 0018 000 04-SEP-13
-CP9N 07
Standard Equipment
T7.220 - T270 & T7030 - T7070 T8000
Standard Axle SuperSteer Axle
Not Compatible with SuperSteer Maximum Lift Height (inches):
Maximum Lift Height (feet): MSL - 187
MSL- 16.2 Dump Clearance (inches):
Dump Clearance (feet): MSL - 150
MSL - 13.1 Digging Depth (inches):
Digging Depth (inches): MSL - 6
MSL - 6.7 Lift Capacity @ 800mm from bucket
Lift Capacity @ 800mm from bucket pivot point (lbs.): MSL - 5250
pivot point (lbs.): MSL - 6,248 Breakout Force @ 800mm from bucket
Breakout Force @ 800mm from bucket pivot point (lbs.): MSL - 7000
pivot point (lbs.): MSL - 7,150 Reach @ Maximum Lift (inches):
Reach @ Maximum Lift (inches): MSL - 65
MSL - 28.8 Reach @ Ground Level (inches):
Reach @ Ground Level (inches): MSL - 109
MSL - 117.0 Bucket Rollback Angle (degrees):
Bucket Rollback Angle (degrees): MSL - 38
MSL - 42# Bucket Dump Angle (degrees):
Bucket Dump Angle (degrees): MSL - 58
MSL - 51
Page 91 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
Standard Equipment
- CORE - Depot Stock - (B) Mounting Kit
- NON CORE - Factory Order - 3 months - (C) Hydraulic Components: Loader
Mounted valve (includes hose kit) or
LOADER COMPONENTS: rear hydraulic hose package .
Order the following to make up a - (D) Bucket(s) and Attachments
complete Model 875TL Quick-Attach - (E) Extra Equipment
Loader: - (F) Miscellaneous
- (A) Basic Packaged Loader Self-
Leveling Package: Includes boom, WARRANTY
MSL linkage, multi-coupler 4, 4-bar New Holland - 2 Year Warranty
bucket linkage, bucket level indicator
and parking stands.
Models
Page 92 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
SD_MD MODEL
875TL 875TL $9,487.00
BASE LOADER
BRACKETS
Page 93 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
HYDRAULIC KITS
T8000 series
NOTE: Tractor must be equipped with Power Beyond
730801006
730800 Loader Mount Valve_ElecHyd 2FN $3,245.00
2 Function Electronic Loader Mounted Valve Kit
Includes:
Joystick
2 function electronic loader mounted Loader Control Valve (LCV)
4 male couplers integrated into Loader Control Valve
2 hoses from tractor to Loader Control Valve
T8000 series
Programmable hydraulic flow.
NOTE: Tractor must be equipped with Power Beyond
730800006
Page 94 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
Page 95 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
OTHERS
same as 713661006
Page 96 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
LOADER OPTIONS
SOFT RIDE
Page 97 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
OTHERS
MATERIAL BUCKETS
Page 98 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
Page 99 of 134
-CP9N 07 0018 000 04-SEP-13
-CP9N 07
BALE HANDLING
GRAPPLE BUCKETS
OTHER
Standard Equipment
T8 Series NOTE: IMPORTANT ORDERING
Standard Axle INFORMATION
1400mm Standard Width - T8 Series tractors must be
Maximum Lift Height (feet): equipped with rear remotes to operate
MSL - 16.1 the Model 885TL loader.
Dump Clearance (feet): - The loader is operated by the optional
MSL - 12.8 factory Installed joystick programmed to
Digging Depth (inches): operate the rear remotes or by the rear
MSL - 9.4 remote switches with the use of a rear
Lift Capacity @ 800mm from bucket hydraulic hose kit.
pivot point (lbs.): MSL - 6,490
Breakout Force @ 800mm from bucket LOADER COMPONENTS:
pivot point (lbs.): MSL - 8,536 Order the following to make up a
Reach @ Maximum Lift (inches): complete Model 885TL Quick-Attach
MSL - 41.8 Loader:
Reach @ Ground Level (inches): - (A) Basic Packaged Loader Self-
MSL - 117.8 Leveling Package: Includes boom,
Bucket Rollback Angle (degrees): MSL linkage, multi-coupler 4, 4-bar
MSL - 43# bucket linkage, bucket level indicator
Bucket Dump Angle (degrees): and parking stands.
MSL - 50 - (B) Mounting Kit
- (C) Hydraulic Components: Rear
*The Loader specifications provided hydraulic hose kit.
are general specifications and - (D) Bucket(s) and Attachments
may vary based on tractor model, - (E) Extra Equipment
hydraulic system, tire size, etc. - (F) Miscellaneous
Models
SD_MD MODEL
885TL 885TL $10,307.00
BASE LOADER
BRACKETS
HYDRAULIC KITS
OTHERS
same as 713662
LOADER OPTIONS
SOFT RIDE
MATERIAL BUCKETS
BALE HANDLING
GRAPPLE BUCKETS
Models
COMMERCIAL MODEL MODEL Weight List Price
815TL 815TL 2,796 LB $3,631.00
825TL 825TL 3,154 LB $4,288.00
835TL 835TL 3,454 LB $5,520.00
845TL 845TL 3,654 LB $6,453.00
855TL 855TL 4,254 LB $7,155.00
865TL 865TL 3,791 LB $9,809.00
875TL 875TL 3,987 LB $13,118.00
885TL 885TL 4,254 LB $13,938.00
BALE HANDLING
713671006 48IN Fork 55IN Wide 3500 LB Cap EUR 355 LB $950.00
CORE Euro Style - Pallet Forks 48" fork, 55" wide
3500 lb capacity
For 815, 825, 835, 845, 855, 865 and 875TL
713672006 48IN Fork 55IN Wide 3500 LB Cap SSL 355 LB $950.00
CORE Euro Style - Pallet Forks 48" fork, 55" wide
3500 lb capacity
For 815TL, 825TL, 835TL
Models
COMMERCIAL MODEL MODEL Weight List Price
815TL 815TL 2,796 LB $3,631.00
825TL 825TL 3,154 LB $4,288.00
835TL 835TL 3,454 LB $5,520.00
845TL 845TL 3,654 LB $6,453.00
855TL 855TL 4,254 LB $7,155.00
865TL 865TL 3,791 LB $9,809.00
875TL 875TL 3,987 LB $13,118.00
885TL 885TL 4,254 LB $13,938.00
Front Brackets
717684006 Front frame set 525 KG $1,973.00
T4020, T4030
(Same as 717684)
717687006 FRONT FRAME SET, SS 435 KG $1,973.00
T4020, T4030 SuperSteer
(Same as 717687)
717683006 Front frame set 525 KG $1,973.00
T4040, T4050
(Same as 717683)
717686006 FRONT FRAME SET - SS 435 KG $1,973.00
T4040, T4050 SuperSteer
(Same as 717686)
730408006 Front Subframe 397 KG $1,973.00
TD5030
(Same as 730408)
717681006 Front frame set 588 KG $1,973.00
TD5050
(Same as 717681)
717688006 Front frame set 653 KG $1,973.00
T5040, T5050, T5060, T5070
(Same as 717688)
715456006 Front mounting brackets 518 KG $2,309.00
T6020, T6040, T6060 Delta, Plus, Elite
4 Cylinder
Standard and SuperSteer Axles
(Same as 715456)
715459006 Front mounting brackets 650 KG $2,309.00
T6030, T6050, T6070 Delta, Plus, Elite
6 Cylinder
Standard and SuperSteer Axles
(Same as 715459)
715453016 Front subframe set 950 KG $2,640.00
T6030, T6050, T6070, T6080
Elite RangeCommand / PowerCommand
Standard and SuperSteer Axles
and
T7.170, T7.185, T7.200, T7.210 ordered with
333822 rear loader bracket
Same as 715453016
715451116 Front subframe set 1,175 $2,640.00
T7030, T7040, T7050, T7060, T7070 KG
Standard and SuperSteer Axles
(Same as 715451)
Rear Brackets
717685006 Rear Brackets 75 KG $641.00
T4020, T4030
Standard and SuperSteer Axles
(Same as 717685)
730656006 Rear Brackets 145 KG $641.00
T4040, T4050
Standard and SuperSteer Axles
(Same as 730656)
717682006 Rear Brackets 124 KG $641.00
TD5030 & TD5050
(Same as 717682)
730655006 Rear Brackets 100 KG $641.00
T5040, T5050, T5060, T5070
(Same as 730655)
716454036 Rear Brackets 285 KG $641.00
T6010, T6020, T6040, T6060 Delta, Plus, Elite
4 Cylinder
Standard and SuperSteer Axles
716454036
715687036 Rear Brackets 285 KG $641.00
T6030, T6050, T6070 Delta, Plus, Elite
6 Cylinder
Standard and SuperSteer Axles
(Same as 715687)
715450026 Rear Brackets 21 KG $641.00
T6030, T6050, T6070, T6080
Elite RangeCommand / PowerCommand
Standard and SuperSteer Axles
715450026
716170006 Rear Brackets 265 KG $641.00
T7030, T7040, T7050, T7070
Standard and SuperSteer axles
(Same as 715617)
Complete Subframe
730410006 T4030/40F SUB FRAME ASSEMB 490 KG $1,973.00
T4030F & T4040F
One Piece Subframe
730409006 T4050 SERIES SUBFRAME ASSY. 90 KG $1,973.00
T4050F, T4060F
One Piece Subframe
730412006 TS6000 SERIES SUBFRAME ASSYEMBLY 570 KG $1,973.00
TS6000 Series
One Piece Subframe
(Same as 730412)
730809006 FRT RR BRKTS W GG 1,300 $3,238.00
T7.220 -T7.270 & T7040-T7070 KG
Standard Axle Only
Complete Subframe Set (Front and Rear)
with grill guard
(For use with 875TL ONLY)
(Same as 730809)
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
Complete TPS
713693006 BRIDGE T4 COMPLETE 379 KG $2,629.00
T4.85, T4.95, T4.105 Jesi Production
Horizontial TPS and Vertical TPS upright with grill guard
Same as 713693
865TL for
T7.220, T7.235, T7.250, T7.260, T7.270
T7030, T7040, T7050, T7060, T7070
T4000F Series
(Same as 713616)
713617006 Hydraulic Valve Set - 713617 80 KG $1,505.00
2 Function Loader Mounted valve, joystick & hose kit
Includes:
Joystick
Loader mounted Loader Control Valve
4 male couplers integrated into Loader Control Valve
2 hoses from tractor to Loader Control Valve
TD5000
(Same as 713617)
713640006 Hydraulic vlv set FA 80 KG $1,505.00
2 Function loader mounted valve, joystick, and hose kit
Includes:
Joystick
Loader mounted Loader Control Valve(LVC)
4 male flat face couplers integrated into the Loader Control Valve
2 hoses running from tractor to the Loader Control Valve
TS6.xxx Series
713640
TS6000 Series
(Same as 730804)
713633006 2 Func Hydraulic Set 90 KG $3,167.00
2 Function Electronic Loader Mounted Valve Kit
Includes:
Joystick
2 function electronic loader mounted Loader Control Valve (LCV)
2 hoses from tractor to loader control valve
4 flat face female couplers and hoses to loader
Requires:
CCLS tractor hydraulics
3rd function live hose kit
Requires:
CCLS tractor hydraulics
T8000 series
NOTE: Tractor must be equipped with Power Beyond
(Same as 730801)
730800006 Loader Mount Valve with Joystick 89 KG $3,245.00
2 Function Electronic Loader Mounted Valve Kit
Includes:
Joystick
2 function electronic loader mounted Loader Control Valve (LCV)
4 male couplers integrated into Loader Control Valve
2 hoses from tractor to Loader Control Valve
T8000 series
Programmable hydraulic flow.
NOTE: Tractor must be equipped with Power Beyond
(Same as 730800)
T5000 Series
(Same as 717517)
T5000 Series
(Same as 730899)
713687006 HOSE KIT-4 HOSE 22 KG $732.00
2 Function Hose Kit for Tractor Mounted Loader Valve
Includes:
Multi-Coupler 4 Base and 4 hoses to tractor loader valve
T5 Series
(Same as 713687)
Multi Coupler
713618006 Multi-Coupler 4 7/8 in. 19 KG $663.00
Complete 2 funtion Multi Coupler Kit
Includes:
Multi-Coupler 4 base
Multi-Coupler 4 cap
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve
(Same as 713618)
Requires:
Hose kits with flat face couplers
Tractor mounted loader valve with 3rd slice
3rd function live hose kit for the loader
(Same as 71362)
713621006 Multi-Coupler 1-1/16 in. 10 KG $477.00
2 Funtion Multi Coupler Cap
Includes:
Multi Coupler 4 cap
Requires:
Loader mounted Loader Control Valve (LCV)
(Same as 713621)
713611006 MuitiCoupler 2 713611 10 KG $391.00
3rd function Multi Coupler Cap
Includes:
Multi Coupler 2 cap (for live 3rd function)
Requires:
Loader mounted Loader Control Valve (LCV)
(Same as 713611)
713632006 Adapt Kit w/4P Coupler 10 KG $156.00
Kit that allows new 805 Series loaders to be
connected to 800 Series loader mounted valves
or hose kit
713631006 4 Coupler Adapt Kit 7 Pin 10 KG $156.00
Flat face coupler kit that allows 800 Series
loaders to be connected to the new 805 Series
loader mounted valve or new 805 Series
hose kits
713630006 Multi-Coupler 4 Adapt Kit w/7 pin 10 KG $596.00
Multi coupler 4 adaptor kit allows 800 Series loaders
to be connected to the new 805 Series
loader-mounted valve or new 805 Series hose kits
(Same as 713603)
713604006 3 Func Live Hose Kit 713604 18 KG $518.00
3rd Function Live Hose Kit with Multi Coupler
Includes:
Multi Coupler 2 cap and 2 hoses to loader
Same as 713661
713636006 HYD FP LK EURO 713636 19 KG $537.00
Hydraulic Attachment Disconnect/Lock
Euro Style quick attach only
Includes separate push and hold button that works
with an electronic joystick or with the use of a
3rd function diverter valve (717698 or 717698016)
with a mechanical joystick
For 875TL
(Same as 713636)
713637006 HYD FP LK EURO 713637 19 KG $537.00
Hydraulic Attachment Disconnect/Lock
Euro Style quick attach only
Includes separate push and hold button that works
with an electronic joystick or with the use of a
3rd function diverter valve (717698 or 717698016)
with a mechanical joystick
For 885TL
(Same as 713637)
730790006 4th function electro-hydraulic kit 19 KG $736.00
4th function diverter valve
(Requires 3rd function diverter 717698 or 717698006
and joystick handle kit 713627 or 713627006)
(Same as 730790)
same as 713662
Soft Ride
717520046 Soft Ride Option F/840/850TL 7 KG $848.00
Soft Ride Kit
717520046 for 815TL, 825TL, 835TL
717520056 SOFTDRIVE OPTION F/860/870TL 11 KG $848.00
Soft Ride Kit
717520056 for 845TL, 855TL
713624006 SOFT RIDE 713624 12 KG $848.00
Soft Ride Kit for 865TL
(Same as 713624)
Grill Guard
715824136 Grill Guard 25 KG $305.00
Heavy Duty Grill Guard Insert
T4000, & T5000, TS6000, TS6.000
Will also work on the PowerStar T4.75
715824146 Heavy Duty Grill guard 45 KG $305.00
Heavy Duty Grill Guard
T6 & T6000 Series
715824156 Heavy Duty Grill guard 50 KG $305.00
Heavy Duty Grill Guard Insert
T7 & T7000 Series
715824166 Grill Guard Conversion Kit 88 KG $506.00
Heavy Duty Grill Guard Conversion Kit (uprights)
T6 & T6000 Series
715824176 Grill Guard Conversion Kit 143 KG $506.00
Heavy Duty Grill Guard Conversion Kit (uprights)
T7 & T7000 Series
Other Kits
716830016 FENDER RELOCATION KIT 16 KG $56.00
T8000 Fender relocation kit
(For use with SuperSteer axle when using 14.9x34
or smaller front tires on 72 or wider track setting)
(Same as 716830)
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Mowers
Models HM234/235/236 Economy Disc Mower 09/02/13 3-5
Models H6730/H6740/H6750/H6830 09/02/13 6-7
Tedders
ProTed™ Rotary Tedders 09/02/13 8-11
Windrow Mergers
Model H5410 Pull Behind Merger 09/02/13 12-14
Model H5420 Swing Tongue Merger 09/02/13 15-17
Model H5430 Swing Tongue Merger 09/02/13 18-20
Rakes
Models 256/258/260 Rolabar® Rake 09/02/13 21-22
Model 57 Mounted Rolabar® Rake 09/02/13 23
Model 216 Unitized Rake 09/02/13 24
ProRotor™ Rotary Rakes 09/02/13 25-30
ProCart™ Deluxe Carted W heel Rakes 09/02/13 31-33
Model HT152 W heel Rake 09/02/13 34-36
Model HT154 W heel Rake 09/02/13 37-39
Model H5980 Heavy-Duty W heel Rake 09/02/13 40-42
Mower-Conditioners
Discbine® Disc Mower-Conditioners
Models H7220/H7320 Side Pull 09/02/13 43-44
Models H7230/H7330 Side Pull 09/02/13 45-47
Models H7450/H7550 Center Pull 09/02/13 48-50
Models H7460/H7560 Center Pull 09/02/13 51-53
Models Discbine 313 Center Pull 09/02/13 54-56
Models Discbine 316 Center Pull 09/02/13 57-59
Haybine® Sickle Mower-Conditioners
Models 472/488 Side Pull 09/02/13 60-61
Model H7150 Center Pull 09/02/13 62
Page 1 of 187
HAYING EQUIPMENT INDEX - CROP PREPARATION (con't)
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Self-Propelled W indrowers
Model H8040 09/01/13 63-70
Model H8060 09/01/13 71-77
Model H8080 09/01/13 78-84
Model Speedrower 130 09/01/13 85-94
Model Speedrower 200 09/01/13 95-103
Model Speedrower 240 09/01/13 104-112
Speedrower Ballast Chart 09/01/13 113
DuraMerger 419 09/01/13 114-115
Page 2 of 187
-HT1L 01
Models
WHEEL KITS
LANGUAGE KITS
Models
LANGUAGE KITS
HAYTOOL OPTIONS
RAKE OPTIONS
SD_H6220 DEFLECTORS
726972 Anti-Wrap Deflectors
Anti-Wrap Deflector/ Fenders, attach to the wheel columns
providing additional protection against wrapping.
PT3417 kit of 4
PT3625 kit of 6
PT3836 kit of 8
if MODEL is PT3417 $276.00
if MODEL is PT3625 $439.00
if MODEL is PT3836 $494.00
MANUALS
OPERATORS
MISCELLANEOUS
LANGUAGE KITS
SD_03002 PTO FI
717758 PTO HYD DRIVE KIT $3,497.00
MISCELLANEOUS
LANGUAGE KITS
MISCELLANEOUS
LANGUAGE KITS
WARRANTY
New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price
256 RAKE Ground Drive - 90 Steel Tines 840 LB $7,064.00
258 RAKE Ground Drive - 100 Steel Tines 1,115 LB $8,177.00
260 RAKE Ground Drive-100 Rubber Tines 1,095 LB $9,717.00
COMPLETING PACKAGES
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price
57 RAKE With 90 Steel Tines 780 LB $6,107.00
COMPLETING PACKAGES
COMPLETING PACKAGES
LANGUAGE KITS
(Milwaukee, WI)
Standard Equipment
(2) 10-1/2 ft. Hydraulic Powered Rake 11L x 15 Tires
Baskets Adjustable Clevis Hitch and Jack Stand
Hydraulic Controlled Raking Width, Spring Suspended, 5-Bar Reel per
Hydraulic Basket Lift Basket
Hydraulic Flow Control Valve 220 Rubber Mounted Tines
Four Hose Tractor Hookup (two circuits) Sealed Ball Bearings on Tine Bars
Tractor Mounted Control Box Adjustable Basket Tilt
Unitized Trail Frame Stripper Bar Support
Single Basket Top Link Safety Tow Chain
Models
COMMERCIAL MODEL Weight Factory Data List Price
216 RAKE 2,960 LB $30,567.00
WHEEL KITS
LANGUAGE KITS
HAYTOOL OPTIONS
RAKE OPTIONS
LANGUAGE KITS
RAKE OPTIONS
LANGUAGE KITS
Models
WHEEL KITS
Models
HYDRAULIC KITS
WHEEL KITS
HAYTOOL OPTIONS
RAKING EXTENSIONS
LANGUAGE KITS
Models
COMPLETING PACKAGES
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price
H7230 3.2m Chevron Roll 4,340 LB $31,321.00
H7330 3.2m Flail 4,340 LB $29,737.00
COMPLETING PACKAGES
COMPLETING PACKAGES
SD_41039 HITCH
717936 Drawbar Hitch No Charge
Must select either drawbar or 2 point swivel for swivel hitch
machines.
717937 2 Point Hitch No Charge
Must select either 2 point or drawbar swivel for swivel hitch
machines.
PTO OPTIONS
LANGUAGE KITS
COMPLETING PACKAGES
CONDITIONER TYPE
DRAWBAR/TONGUE OPTIONS
SD_41030 HITCH
716533 2-point swivel hitch-installed 1,300 LB No Charge
716694 Drawbar swivel hitch-installed 1,300 LB No Charge
LANGUAGE KITS
COMPLETING PACKAGES
CONDITIONER TYPE
DRAWBAR/TONGUE OPTIONS
SD_41030 HITCH
716533 2-point swivel hitch-installed 1,300 LB No Charge
716694 Drawbar swivel hitch-installed 1,300 LB No Charge
LANGUAGE KITS
COMPLETING PACKAGES
HITCH OPTIONS
SD_41030 HITCH
716533 2-point swivel hitch-installed No Charge
ASAE Cat. III 3-Point Hitch Compatible
716694 Drawbar swivel hitch-installed No Charge
ASAE Cat. III Hitch Compatible. Drawbar swivel hitch
adapter not compatible with Cat. III HD drawbars.
Compatible with drawbar maximum width of 84 mm.
717752 Swivel Tongue less hitch ($550.00)
Allows the use of a 'take-off' hitch from a previous unit
that has been replaced by the alternative hitch from Service Parts
HAYTOOL OPTIONS
OPERATORS MANUAL
COMPLETING PACKAGES
HITCH OPTIONS
SD_41030 HITCH
716533 2-point swivel hitch-installed No Charge
ASAE Cat. III 3-Point Hitch Compatible
716694 Drawbar swivel hitch-installed No Charge
ASAE Cat. III Hitch Compatible. Drawbar swivel hitch
adapter not compatible with Cat. III HD drawbars.
Compatible with drawbar maximum width of 84 mm.
717752 Swivel Tongue less hitch ($550.00)
Allows the use of a 'take-off' hitch from a previous unit
that has been replaced by the alternative hitch from Service Parts
HAYTOOL OPTIONS
OPERATORS MANUAL
WARRANTY
New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price
472MC 7 ft. 3 in. Width Std Guards 2,460 LB $18,742.00
488MC 9 ft 3 in. Width Std Guards 3,040 LB $20,240.00
COMPLETING PACKAGES
COMPLETING PACKAGES
HYDRAULIC KITS
LANGUAGE KITS
Models
COMMERCIAL CONDITIONER TYPE WORKING WIDTH Weight Factory Data List Price
MODEL
H7150 1000 rpm PTO 14 ft. Header Mounting Kit 3,050 LB $17,266.00
COMPLETING PACKAGES
COMPLETING PACKAGES
REAR AXLE
SD_15001 AXLES
725179 Cab and rear axle suspension 255 LB No Charge
725180 Cab suspension only ($2,730.00)
DRIVE TIRES
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade 34 LB $2,116.00
Includes front and rear sunscreens,
four radiospeakers, automatic termperature
control, additional sound supression, and integrated noise
reduction acoustics.
H8060/H8080 also get head drive pump quiet plate
727018 Standard Cab package No Charge
SD_05072 MIRROR
725971 Standard mirrors No Charge
725972 Deluxe mirrors 30 LB $728.00
(Adjustable from inside cab)
SD_25010 DISPLAY
726908 Cab A-Pillar Display $628.00
SD_N6393 SEATS
726891 Cloth Seats No Charge
726892 Leather Seats $1,420.00
HYDRAULICS GROUP
LANGUAGE KITS
UNASSIGNED
LIGHTING
CONTROLS AND INSTRUMENTATION (2) Halogen, Cab Roof-mounted
Low-effort Ground Speed/forward- Roading Lights
neutral reverse control (4) Halogen, Cab Roof-mounted Work
Multifunction Handle with push button Lights
controls for: (2) Halogen, Rear Work Lights
Performance Monitor display selection (2) Halogen, Stubble Lights
Header raise/lower (2) Combination rear Tail Light/Brake
Header tilt control Lights
Reel raise/lower (draper headers) (2) Combination Turn signal/Hazard
Reel fore/aft (draper headers) Flashers
Header cut height (draper headers) Time Delay Cab Exit Light
Header lateral tilt (draper headers) 12 volt, Service Light Receptacle
Header Engagement/Reverser Controls
Header Flotation Adjustment
Disc Header Speed Adjustment
Remote head tilt control switch WARRANTY
Park Brake Control New Holland Standard Warranty Applies
Horn
Adjustable Position, Console Mounted
Performance Monitor, with 4-line NOTE: The H8060 can be ordered in 2
Display readout ways:
Major machine functions monitored 1. Order the base unit, desired
include: tires/wheels and any factory
engine oil pressure supplied options and field installed
engine coolant temperature completing packages needed.
engine rpm 2. Prairie Special packet which includes
battery voltage all options needed to harvest crops with
ground speed a draper head including double swath
fuel level capability.
engine/header hours
hydrostatic transmission charge oil See packet list for options included in
pressure the packet.
COMPLETING PACKAGES
REAR AXLE
SD_15001 AXLES
725179 Cab and rear axle suspension 255 LB No Charge
725180 Cab suspension only ($2,730.00)
DRIVE TIRES
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade 34 LB $2,116.00
Includes front and rear sunscreens,
four radiospeakers, automatic termperature
control, additional sound supression, and integrated noise
reduction acoustics.
H8060/H8080 also get head drive pump quiet plate
727018 Standard Cab package No Charge
SD_05072 MIRROR
725971 Standard mirrors No Charge
725972 Deluxe mirrors 30 LB $728.00
(Adjustable from inside cab)
SD_25010 DISPLAY
726908 Cab A-Pillar Display $628.00
SD_N6393 SEATS
726891 Cloth Seats No Charge
726892 Leather Seats $1,420.00
HYDRAULICS GROUP
LANGUAGE KITS
UNASSIGNED
COMPLETING PACKAGES
REAR AXLE
SD_15001 AXLES
725179 Cab and rear axle suspension 255 LB No Charge
725180 Cab suspension only ($2,730.00)
DRIVE TIRES
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade 34 LB $2,116.00
Includes front and rear sunscreens,
four radiospeakers, automatic termperature
control, additional sound supression, and integrated noise
reduction acoustics.
H8060/H8080 also get head drive pump quiet plate
727018 Standard Cab package No Charge
SD_05072 MIRROR
725971 Standard mirrors No Charge
725972 Deluxe mirrors 30 LB $728.00
(Adjustable from inside cab)
SD_25010 DISPLAY
726908 Cab A-Pillar Display $628.00
SD_N6393 SEATS
726891 Cloth Seats No Charge
726892 Leather Seats $1,420.00
HYDRAULICS GROUP
LANGUAGE KITS
UNASSIGNED
SPEEDROWER® 130
US PRICE LIST
(Grand Island, NE)
Standard Equipment
ENGINE
126 hp (94 kW)* New Holland 274 CID CAB
(4.5 L) Comfort Ride™ Cab including cab
4 Cylinder, Turbocharged Diesel Engine, Suspension and rear axle suspension
with air-to-air intercooler Curved, Tinted Glass with left-hand door
(meets Tier 3 emissions standards) entry
Mechanically Controlled Fuel Injection Adjustable Tilt/Telescopic Steering
System Column
Exhaust Aspirated Air Cleaner Fore/Aft Adjustable Right-hand Control
Engine Exhaust Muffler Console, moves with seat
Rotary Radiator Screen Cleaner Deluxe Fabric-covered, air-suspension
150 amp Alternator Operator's Seat, includes:
(1) 12-volt 925 CCA Low Maintenance Fore/aft isolator
Battery Lumbar and ride dampener adjust
120-gallon (454 L) Fuel Tank Retractable seat belt
Operator’s Presence Protection
*Manufacturer's Rating Per ECE R120 / System
ISO 14396 Front windshield wiper/washer
Instructor's Seat with seat belt
CHASSIS/DRIVELINE Beverage Cup Holder, Lighter and
Independent Rear Axle Suspension Ashtray
Two Speed Range Hydrostatic Air-Conditioner and Heater with manual
Transmission with top speed of 18 MPH temperature control
Heavy-duty, Double Reduction Planetary Dual Cab Air Filtration System, includes:
Final Drives (1) Fresh air external filter
Spring Applied, Hydraulically Released (1) In-cab recirculation filter
Park Brake (console switch controlled) Cab Interior Lighting Package, includes:
Adjustable Rear Axle with Forked (1) Center Dome Light,
support and 14L x 16.1, 8PR tires (1) Right-Hand Console Light
Fixed Speed Hydraulic Header Drive Delco AM/FM/weather band Radio
Less Header Drive Motor Includes auxiliary input socket
Hydraulic Poppet Style Couplers For for MP3 player, satellite radio or
Header Drive Motor Attachment portable CD player
HS Haybine® Head Power Reverser Radio-ready with AM/FM Antenna (2)
(in-cab control) Speakers and DIN Mounting Slot
Hydraulic Header Flotation (in-cab (2) Additional Radio (communications)
adjustable) Port Locations with DIN mounting
Hydraulic Header Tilt (in-cab control plus slots
LH remote tilt control switch) Business Band antenna ready
Manual Adjust Hay Windrow Shields (2) External Mount Rear View Mirrors
(used on non-draper machines only) (mechanical adjust)
Single Lever Header Transport Lock (1) In-cab Rearview Mirror
System (1) 12-volt Auxiliary Power Outlet
Standard head latch system EST (Electronic Service Tool) Diagnostic
Lockable Outside Storage Compartment Port
SPEEDROWER® 130
US PRICE LIST
(Grand Island, NE)
Standard Equipment
(2) Halogen, Cab Roof-mounted
CONTROLS AND INSTRUMENTATION Road Lights
Low-effort Ground Speed/forward- (4) Halogen, Cab Roof-mounted Work
neutral reverse control Lights
Multifunction Handle with push button (2) Halogen, Rear Work Lights
controls for: (2) Halogen, Stubble Lights
Performance Monitor display selection (2) Combination rear Tail Light/Brake
Header raise/lower Lights
Header tilt control (2) Combination Turn signal/Hazard
Reel raise/lower (draper headers) Flashers
Reel fore/aft (draper headers) Time Delay Cab Exit Light
Header cut height (draper headers) 12 volt, Service Light Receptacle
Header lateral tilt (draper headers)
Header Engagement/Reverser Controls Auto Guidance:
Header Flotation Adjustment IntelliSteer(TM) Auto Guidance Ready
Remote head tilt control switch
Park Brake Control WARRANTY
Horn New Holland Standard Warranty Applies
Adjustable Position, Console Mounted
Monitor Ready (need to choose
monitor) NOTE: The Speedrower 130 can be
Major machine functions monitored ordered in 5 ways:
include: 1. Order the base unit, desired
engine oil pressure tires/wheels and any factory
engine coolant temperature supplied options needed.
engine rpm 2. Western Special packet with R3 turf
battery voltage tires/wheels.
ground speed 3. Western Special packet with R4 ind.
fuel level tread lug tires/wheels.
engine/header hours 4. Prairie Special packet.
hydrostatic transmission charge oil (Includes double swath capability)
pressure 5. IntelliSteer Auto Guidance Complete -
Automatic engine shutdown protection: WAAS or OmniSTAR
low engine oil pressure
coolant overheat
low hydrostatic charge oil pressure See packet lists for options included in
each packet
LIGHTING
SPEEDROWER® 130
US PRICE LIST
(Grand Island, NE)
Models
SPEEDROWER® 130
US PRICE LIST
(Grand Island, NE)
SPEEDROWER® 130
US PRICE LIST
(Grand Island, NE)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
COMPLETING PACKAGES
REAR AXLE
SD_15001 AXLES
725179 Cab and rear axle suspension No Charge
725180 Cab suspension only ($2,703.00)
DRIVE TIRES
REAR TIRES
LIGHT KITS
SPEEDROWER® 130
US PRICE LIST
ADAPTER PACKAGES
ENGINE GROUP
SPEEDROWER® 130
US PRICE LIST
SD_25010 DISPLAY
726908 Cab A-Pillar Display 9000483P56 $628.00
Provides additional warning lights and gauges. Not compatable
with touch screen display
SD_N6393 SEATS
726891 Cloth Seats No Charge
726892 Leather Seats 9001093P40 $1,420.00
Leather-covered and heated operator's seat with air suspension.
Leather-covered foldable instructor's seat.
HYDRAULICS GROUP
WEIGHT GROUP
SPEEDROWER® 130
US PRICE LIST
AUTOGUIDANCE
SD_27047 AUTOGUIDANCE
726897 Autoguidance Ready No Charge
Included in base price.
1. Cab and chassis wiring.
2. Steering valve.
3. Mounting provisions for Navigation controller.
4. Mounting provisions for GPS 372 receiver.
5. Wiring connection for Touch Screen Display.
LANGUAGE KITS
SPEEDROWER® 130
US PRICE LIST
TRANSMISSION GROUP
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade $2,116.00
Includes front and rear sunscreens,
four radio speakers, automatic temperature
control, and additional integrated sound supression.
SD_05072 MIRROR
725972 Deluxe mirrors $728.00
Adjustable from inside the cab.
SPEEDROWER® 130
US PRICE LIST
* DuraMerger 419 not recommended with sickle header. If the Speedrower is equipped with a disc header,
the DuraMerger 419 can be left on the windrower and operated with a 16' or 18' sickle header.
# Models 720HD, 750HD, 770HD are not recommended for use with the Speedrower Series.
Weight Packages Weight Amount
1 0 lbs 0 kg Recommended for: 6‐cyl w/16' sickle or 16' or 18' sickle w/merger.
2 200 lbs 91 kg Recommended for: 4‐cyl w/12' sickle; 6‐cyl. w/18' sickle or 16' disc with merger.
3 400 lbs 182 kg Recommended for: 4‐cyl w/14' sickle; 6‐cyl. w/16' disc w/o merger or 25' draper.
4 800 lbs 364 kg Recommended for: 4‐cyl w/16' or 18' sickle or 25' draper; 6‐cyl. w/19' disc‐ w/ or w/o merger.
5 1100 lbs 500 kg Recommended for: 6‐cyl w/30' draper.
6 1400 lbs 636 kg Recommended for: 4‐cyl w/30' draper; 6‐cyl. w/36' draper.
7 1600 lbs 727 kg Recommended for: 4‐cyl w/36' draper; 6‐cyl. w/40' draper.
-HT2J 02
SPEEDROWER® 200
US PRICE LIST
(Grand Island, NE)
Standard Equipment
ENGINE LH remote control switch)
190 hp (142 kW)* New Holland NEF w/ tilt indicator on tilt cylinder
411 CID (6.7 L) 6 Cylinder, 8" Stroke Head Tilt Cylinder
Turbocharged Diesel Engine, with air-to- Manual Adjust Hay Windrow Shields
air intercooler (meets Tier 3 emissions (used on non-draper machines only)
standards) Single Lever Header Transport Lock
Electronically Controlled, High Pressure System
Common Rail Fuel Injection System Standard head latch system
Donaldson TopSpin™ Air Precleaner** Lockable Outside Storage Compartment
Engine Exhaust Muffler
Rotary Radiator Screen Cleaner CAB
150 amp Alternator Comfort Ride™ Cab including Cab
(2) 12-volt 650CCA Low Maintenance Suspension and rear axle suspension
Batteries Curved, Tinted Glass with left-hand door
120-gallon (454 L) Fuel Tank entry
*Manufacturer's Rating Per ECE R120 / Adjustable Tilt/Telescopic Steering
ISO 14396 Column
Fore/Aft Adjustable Right-hand Control
CHASSIS/DRIVELINE Console, moves with seat
Independent Rear Axle Suspension Deluxe Fabric-covered, air-suspension
Two Speed Range Hydrostatic Operator's Seat, includes:
Transmission with top speed of 18 MPH fore/aft isolator
Heavy-duty, Double Reduction Planetary lumbar and ride dampener adjustment
Final Drives retractable seat belt
Spring Applied, Hydraulically Released Operator’s Presence Protection System
Park Brake (console switch controlled) Front windshield wiper/washer
Heavy-duty Adjustable Rear Axle with Instructor's Seat with seat belt
Forked Arm Support, with 14L x 16.1, Cup Holder, Lighter and Ashtray
8 PR Rear Tires Air-Conditioner and Heater with manual
Variable Speed Hydrostatic Header Drive temperature control
Less Header Drive Motor Dual Cab Air Filtration System:
Hydraulic Poppet Couplers for header (1) Fresh air external filter
drive motor attachment for Draper (1) In-cab recirculation filter
Ready units only Cab Interior lighting package, includes:
Threaded fittings to hard plumb disc (1) Center Dome Light
heads for header drive motor (1) Right-Hand Console Light
attachment for Hay units only Delco AM/FM/weather band Radio
Head Power Reverser (in-cab control), Includes auxiliary input socket
for HS Haybine® heads, Discbine® for MP3 player, satellite radio or
heads, or Durabine heads portable CD player
Deluxe Hydraulic Header Flotation Radio-ready with AM/FM Antenna (2)
(flotation weight at each end of Speakers and DIN Mounting Slot
header (2) Additional Radio (communications)
independently controlled from cab) Port
Hydraulic Header Tilt (in-cab control plus Locations with DIN mounting slots
SPEEDROWER® 200
US PRICE LIST
(Grand Island, NE)
Standard Equipment
Business Band Antenna Ready for:
Windshield Wiper/Washer low engine oil pressure
(2) External Mount Rear View Mirrors coolant overheat
(mechanical adjust) low hydrostatic charge oil pressure
(1) In-cab Rearview Mirror Advanced Power Management System
(2) 12-volt Auxiliary Power Outlets
EST (Electronic Service Tool) Diagnostic LIGHTING
Port (2) Halogen, Cab Roof-mounted
Roading Lights
(4) Halogen, Cab Roof-mounted Work
CONTROLS AND INSTRUMENTATION Lights
Low-effort Ground Speed/forward- (2) Halogen, Rear Work Lights
neutral reverse control (2) Halogen, Stubble Lights
Multifunction Handle with push button (2) Combination rear Tail Light/Brake
controls for: Lights
Performance Monitor display selection (2) Combination Turn signal/Hazard
Header raise/lower Flashers
Header tilt control Time Delay Cab Exit Light
Reel raise/lower (draper headers) 12 volt, Service Light Receptacle
Reel fore/aft (draper headers)
Header cut height (draper headers) Auto Guidance:
Header lateral tilt (draper headers) IntelliSteer(TM) Auto Guidance Ready
Header Engagement/Reverser Controls
Header Flotation Adjustment WARRANTY
Disc Header Speed Adjustment New Holland Standard Warranty Applies
Remote head tilt control switch
Park Brake Control
Horn NOTE: The Speedrower 200 can be
Adjustable Position, Console Mounted ordered in 3 ways:
Monitor Ready (Monitor option 1. Order the base unit, desired
required) tires/wheels and any factory
Major machine functions monitored supplied options and field installed
include: completing packages needed.
engine oil pressure 2. Prairie Special packet which includes
engine coolant temperature all options needed to harvest crops with
engine rpm a draper head including double swath
battery voltage capability.
ground speed 3. IntelliSteer Auto Guidance Complete -
fuel level WAAS or OmniSTAR
engine/header hours
hydrostatic transmission charge oil See packet list for options included in
pressure the packet.
Automatic engine shutdown protection
SPEEDROWER® 200
US PRICE LIST
(Grand Island, NE)
Models
SPEEDROWER® 200
US PRICE LIST
(Grand Island, NE)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
DRIVE TIRES
REAR TIRES
LIGHT KITS
SPEEDROWER® 200
US PRICE LIST
ADAPTER PACKAGES
ENGINE GROUP
TRANSMISSION GROUP
SPEEDROWER® 200
US PRICE LIST
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade $2,116.00
Includes front and rear sunscreens,
four radio speakers, automatic temperature
control, and additional integrated sound supression.
SD_05072 MIRROR
725972 Deluxe mirrors $728.00
Adjustable from inside the cab.
SD_25010 DISPLAY
726908 Cab A-Pillar Display $628.00
Provides additional warning lights and gauges. Not compatable
with touch screen display
SD_N6393 SEATS
726891 Cloth Seats No Charge
SPEEDROWER® 200
US PRICE LIST
HYDRAULICS GROUP
WEIGHT GROUP
SPEEDROWER® 200
US PRICE LIST
AUTOGUIDANCE
SD_27047 AUTOGUIDANCE
726897 Autoguidance Ready No Charge
Included in base price.
1. Cab and chassis wiring.
2. Steering valve.
3. Mounting provisions for Navigation controller.
4. Mounting provisions for GPS 372 receiver.
5. Wiring connection for Touch Screen Display.
LANGUAGE KITS
SPEEDROWER® 200
US PRICE LIST
SPEEDROWER® 240
US PRICE LIST
(Grand Island, NE)
Standard Equipment
ENGINE indicator on the tilt cylinder
226 hp (169 kW)* New Holland NEF 8" stroke header tilt cylinder
411 CID (6.7 L) 6 Cylinder, Manual Adjust Hay Windrow Shields
Turbocharged Diesel Engine,with air-to- (used on non-draper machines only)
air intercooler (meets Tier 3 emissions Single Lever Header Transport Lock
standards) System
Electronically Controlled, High Pressure, Standard head latch system
Common Rail Fuel Injection System Large Diameter (2.75") Head Lift
Donaldson TopSpin™ Air Precleaner** Cylinders
Engine Exhaust Muffler Lockable Outside Storage Compartment
Rotary Radiator Screen Cleaner
150 amp Alternator CAB
(2) 12-volt 650CCA Low Maintenance Comfort Ride™ Cab including cab
Batteries Suspension and rear axle suspension
120-gallon (454 L) Fuel Tank Curved, Tinted Glass with left-hand door
*Manufacturer's Rating Per ECE R120 / entry
ISO 14396 Adjustable Tilt/Telescopic Steering
CHASSIS/DRIVELINE Column
Independent Rear Axle Suspension Fore/Aft Adjustable Right-hand Control
Two Speed Range Hydrostatic Console, moves with seat
Transmission with top speed of 18 MPH Deluxe Fabric-covered, air-suspension
Heavy-duty, Double Reduction Planetary Operator's Seat, includes:
Final Drives fore/aft isolator
Spring Applied, Hydraulically Released lumbar and ride dampener adjustment
Park Brake (console switch controlled) retractable seat belt
Heavy-duty Adjustable Rear Axle with Operator’s Presence Protection System
Forked Arm Support, with 14L x 16.1, Front windshield wiper/washer
8 PR Rear Tires Instructor's Seat with seat belt
Variable Speed Hydrostatic Header Drive Beverage Cup Holder, Lighter and
Less Header Drive Motor Ashtray
Hydraulic Poppet Couplers for header Air-Conditioner and Heater with manual
drive motor attachment for Draper temperature control
Ready units only. Dual Cab Air Filtration System:
Threaded fittings to hard plumb disc (1) Fresh air external filter
heads for header drive motor (1) In-cab recirculation filter
attachment for Hay units only Cab Interior lighting package, includes:
Head Power Reverser (in-cab control), (1) Center Dome Light
for HS Haybine® heads, Discbine® (1) Right-Hand Console Light
heads, or Durabine heads Delco AM/FM/weather band Radio
Deluxe Hydraulic Header Flotation Includes auxiliary input socket
(flotation weight at each end of for MP3 player, satellite radio or
header portable CD player
independently controlled from cab) Radio-ready with AM/FM Antenna (2)
Hydraulic Header Tilt (in-cab control plus Speakers and DIN Mounting Slot
LH remote control switch) with tilt (2) Additional Radio (communications)
SPEEDROWER® 240
US PRICE LIST
(Grand Island, NE)
Standard Equipment
Port for:
Locations with DIN mounting slots low engine oil pressure
Business Band antenna ready coolant overheat
Windshield Wiper/Washer low hydrostatic charge oil pressure
(2) External Mount Rear View Mirrors Advanced Power Management System
(mechanical adjust)
(1) In-cab Rearview Mirror LIGHTING
(2) 12-volt Auxiliary Power Outlets (2) Halogen, Cab Roof-mounted
EST (Electronic Service Tool) Diagnostic Roading Lights
Port (4) Halogen, Cab Roof-mounted Work
Lights
CONTROLS AND INSTRUMENTATION (2) Halogen, Rear Work Lights
Low-effort Ground Speed/forward- (2) Halogen, Stubble Lights
neutral reverse control (2) Combination rear Tail Light/Brake
Multifunction Handle with push button Lights
controls for: (2) Combination Turn signal/Hazard
Performance Monitor display selection Flashers
Header raise/lower Time Delay Cab Exit Light
Header tilt control 12 volt, Service Light Receptacle
Reel raise/lower (draper headers)
Reel fore/aft (draper headers) Auto Guidance:
Header cut height (draper headers) IntelliSteer(TM) Auto Guidance Ready
Header lateral tilt (draper headers)
Header Engagement/Reverser Controls WARRANTY
Header Flotation Adjustment New Holland Standard Warranty Applies
Disc Header Speed Adjustment
Remote head tilt control switch NOTE: The Speedrower 240 can be
Park Brake Control ordered in 3 ways:
Horn 1. Order the base unit, desired
Adjustable Position, Console Mounted tires/wheels and any factory
Monitor Ready. (Monitor option supplied options and field installed
required) completing packages needed.
Major machine functions monitored 2. Prairie Special packet which includes
include: all options needed to harvest crops with
engine oil pressure a draper head including double swath
engine coolant temperature capability.
engine rpm 3. IntelliSteer Auto Guidance Complete -
battery voltage WAAS or OmniSTAR
ground speed
fuel level See packet list for options included in
engine/header hours the packet.
hydrostatic transmission charge oil
pressure
Automatic engine shutdown protection
SPEEDROWER® 240
US PRICE LIST
(Grand Island, NE)
Models
SPEEDROWER® 240
US PRICE LIST
(Grand Island, NE)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
DRIVE TIRES
REAR TIRES
LIGHT KITS
SPEEDROWER® 240
US PRICE LIST
ADAPTER PACKAGES
ENGINE GROUP
TRANSMISSION GROUP
SPEEDROWER® 240
US PRICE LIST
CAB GROUP
SD_05009 CAB
725843 Deluxe Cab Upgrade $2,116.00
Includes front and rear sunscreens,
four radio speakers, automatic temperature
control, and additional integrated sound supression.
SD_05072 MIRROR
725972 Deluxe mirrors $728.00
Adjustable from inside the cab.
SD_25010 DISPLAY
726908 Cab A-Pillar Display $628.00
Provides additional warning lights and gauges. Not compatable
with touch screen display
SD_N6393 SEATS
726891 Cloth Seats No Charge
SPEEDROWER® 240
US PRICE LIST
HYDRAULICS GROUP
WEIGHT GROUP
SPEEDROWER® 240
US PRICE LIST
AUTOGUIDANCE
SD_27047 AUTOGUIDANCE
726897 Autoguidance Ready No Charge
Included in base price.
1. Cab and chassis wiring.
2. Steering valve.
3. Mounting provisions for Navigation controller.
4. Mounting provisions for GPS 372 receiver.
5. Wiring connection for Touch Screen Display.
LANGUAGE KITS
SPEEDROWER® 240
US PRICE LIST
* DuraMerger 419 is not recommended with sickle header. If the Speedrower is equipped
with a DuraMerger 419 for disc cutting, the merger can be left on the windrower and
operated with a 16' or 18' sickle header.*
* Models 720HD, 750HD, 770HD are not recommended with the Speedrower series*
Weight Packages:
1 0 lbs 0 kg Recommended for: 4‐cyl w/12' sickle; 6‐cyl w/16' sickle or 16' or 18' sickle w/merger, or 21' draper.
2 200 lbs 91 kg Recommended for: 4‐cyl w/14' or 16' sickle; 6‐cyl. w/18' sickle or 16' disc with merger. Min. and max. limits apply‐ see ballast matrix for details.
3 400 lbs 182 kg Recommended for: 4‐cyl w/18' sickle or 21' draper; 6‐cyl. w/16' disc w/o merger. Min. and max. limits apply‐ see ballast matrix for details.
4 800 lbs 364 kg Recommended for: 4‐cyl w/25' draper; 6‐cyl. w/19' disc‐ w/ or w/o merger. Min. and max. limits apply‐ see ballast matrix for details.
5 1100 lbs 500 kg Recommended for: 6‐cyl w/30' draper. Min. and max. limits apply‐ see ballast matrix for details.
6 1400 lbs 636 kg Recommended for: 4‐cyl w/30' draper; 6‐cyl. w/36' draper. Min. and max. limits apply‐ see ballast matrix for details.
7 1600 lbs 727 kg Recommended for: 4‐cyl w/36' draper; 6‐cyl. w/40' draper. Min. and max. limits apply‐ see ballast matrix for details.
DURAMERGER 419
US PRICE LIST
(Grand Island, NE)
Standard Equipment
SPECIFICATIONS DIMENSIONS
Crop Delivery Direction: Conveyor Frame Length:
Right side, behind right front tire 77.4 in.(1966.2mm)
Belt Construction: Conveyor Frame Width:
Two ply vulcanized endless 89 in (2260.5mm)
construction with vee-guide Conveyor Belt Width:
tracking rib on inner surface and 42 in. (1066.8mm)
lateral cleats on the outer surface Conveyor Belt Length
to positively move material (roll center to center):
Belt Tensioning: Adjustable spring 84.6 in (2150mm)
tension to minimize shock loading Belt Roller Diameter: 4" (101.6 mm)
Belt Tracking: Eye bolt adjustment at Ground Clearance, Operating:
front end of driver roll Adjustable; 5" (127mm)
Merger Conveyor Flotation: above ground recommended
Table can float upward and rearward Ground Clearance, Transport: 28" (711)
to minimize damage in the event of
contact with an obstruction or WINDROWER REQUIREMENTS
obstacle. HW5 Series, 6-cylinder models
(non- draper) and all H8000, 6-cylinder
HYDRAULIC SYSTEM models (except with dealer-installed
Pump Type:Engine-mounted, draper ready), Speedrower 200,
fixed-displacement Speedrower 240
Pump Capacity @ Rated Speed: Windrower Software 7.3 or higher
HW5 Series - 11.3 gpm (42.8 lpm) Auxiliary Hydraulic Drive Kit is required
H8000 Series - 15.1gpm (57.2 lpm) Select HW5 Series (dealer installed)
Relief Pressure:3000 psi (206.8 bar) or H8000 kit (factory or dealer-installed
Belt Drive Type:Fixed-displacement gear option)
motor drive through #50 chain Header Compatibility:
Motor Displacement: 1.76cu in (28.8cc) 750HD, 770HD, Durabine 416,
Conveyor Belt Speed Range: Durabine 419 disc headers
7-17mph (11.3 -27.4k/h) (models with crop flow augers)
Compatible with roll or LeaningEdge
OPERATOR CONTROLS (TM) flail conditioning systems
Raise/Lower: Propulsion handle-
mounted button control- fully up
or fully down
Belt Speed: Right-hand console
mounted, two-action On/Off switch
and variable speed toggle switch
Side Deflector: Propulsion handle-
mounted button control, variable
position control
Operator Feedback: Audible alarm
and warning messages on
4-line display
DURAMERGER 419
US PRICE LIST
(Grand Island, NE)
Standard Equipment
DuraMerger 419 allows you to place two (further forward at the left end)
windrows side by side, increasing when deployed for merging
forage crop volume for high capacity application.
harvesters.
Movable deflector and belt speed allows
In-cab on the go adjustments for operator to control distance crop is
merger belt speed and the deflector thrown.
position let you control the merger to
place the windrows as desired.
WARRANTY:
Laterally-mounted, draper-belt conveyor; New Holland Standard Warranty Applies
folds up under windrower belly frame
when not in use, allowing single
windrow or swath formation.
Models
WINDROWER REQUIREMENTS
COMPLETING PACKAGES
CONDITIONER TYPE
LANGUAGE KITS
Durabine™ 419
CUTTERBAR:
19’ 4” cutting width HYDRAULIC CONNECTION:
Hydrostatically driven head with two Includes threaded fitting to hard plumb
drive motors hydraulic hoses into windrower
12 disc MowMax™ II true modular hydraulic system
cutterbar
Two 18 degree cutting knives per 24.3” CONVENIENCE AND SAFETY:
(618mm) disc Two adjustable parking stands
ShockPro™ cutterbar drive train Standard Flashing and Turn Signal
protection system Lights
Polyethylene impact resistant hood Hinged shield w/over-center gas spring
liners Enclosed, plastic, telescoping PTO
shields
CROP FLOW AUGER: Overlapping curtains at each joint-
Full cutterbar length, 209.1” (5311mm) meets ISO 17103 standards
20” (508mm) diameter floating feed
auger WINDROWER REQUIREMENTS:
7” (178mm) deep flighting Recommended for use with HW365 and
Removable feed paddles H8080, Speedrower 240.
CONDITIONING SYSTEM:
Removable 102” wide conditioning
system module WARRANTY:
Chevron rubber intermeshing New Holland standard warranty applies
conditioning rolls – 10 3/8” diameter
938 rpm roll input speed @ full
cutterbar speed
Torsion-bar roll pressure system with
single crank handle adjustment
Rolls separate automatically on-the-go
to allow thick material to pass
Roll gap adjustment with one screw on
each end of the conditioner
Conditioning system drive: 4HB v-belt,
enclosed gears w/u-joints
Swath/windrow width from 38” to 96”
COMPLETING PACKAGES
CONDITIONER TYPE
WHEEL KITS
LANGUAGE KITS
CLOSURE KITS
Models
COMPLETING PACKAGES
COMPLETING PACKAGES
HYDRAULIC KITS
WHEEL KITS
LANGUAGE KITS
DRAPER BELTS
42 in. rubberized polyester,
with fiberglass reinforced, tie bar
connections
Moulded V-Guide belt tracking
Draper speed in-cab adjustable flow
control from 0 to 705 ft./minute
Rubber vulcanized drive rolls with
V-guide
COMPLETING PACKAGES
CUTTING SYSTEM
WARRANTY
New Holland Standard Warranty Applies
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
725575 UII Reel 5 bat plastic 1,124 LB ($1,430.00)
725054 UII reel, 6-bat, steel fingers 875 LB No Charge
(Recommended for green hay cutting)
OPTIONAL EQUIPMENT
OTHER EQUIPMENT
Castering Guage Wheels
Slow Speed On-farm Transport with
Tires/Wheels/ and Tongue
Draper Guard (former Hay Guard)
WARRANTY
New Holland Standard Warranty Applies
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
725575 UII Reel 5 bat plastic 1,124 LB No Charge
725054 UII reel, 6-bat, steel fingers 875 LB $1,520.00
(Recommended for green hay cutting)
726877 UII, 6-bat, steel, dbl drv $1,520.00
UII 6-bat, Steel, 30' Reel - Single Reel/Double Dr.
726878 UII, 5-bat, plastic, dbl drv No Charge
UII 5 Bat Plastic 30' Reel - Single Reel/Double Dr.
OPTIONAL EQUIPMENT
WARRANTY
New Holland Standard Warranty Applies
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
725575 UII Reel 5 bat plastic 1,124 LB ($192.00)
726192 UII w/ plastic tines 6BAT 640 LB No Charge
(For one-piece reel)
726879 UII splt, 5-bat, plstc,dbl drv ($192.00)
UII 5-bat, Plastic, 36' Reel - Split Reel/Double Dr.
726880 UII, 6-bat, plastic, dbl drv No Charge
UII 6-bat, Plastic, 36' Reel - Single Reel/Double Dr.
OPTIONAL EQUIPMENT
Standard Equipment
25 ft. (7.6m) cutting width DRAPER BELTS
42 in. rubberized polyester, with
CROP DISCHARGE OPENING WIDTHS: fiberglass reinforced, tie bar
Center-delivery opening- 56-72" (1.42- connections
1.83) Moulded V-Guide belt tracking
*back panel opening can be increased Draper speed in-cab adjustable flow
to 80" by removing extension panels at control from 0 to 750 ft./minute
each side of the center opening* Rubber vulcanized drive rolls with
Double-swath side opening - 55-65 in. V-guide
(1.37-1.65m) Belt angle - 15 degrees at 2 degree tilt
Double-swath includes hydraulic deck
shift REEL
UII reel with end-tine package
KNIFE DRIVE Chain reduction Hydraulic Drive with 60
Single Knife cu. in. (.74L) motor
Schumacher ProDrive knife drive system, Reel shipped fully assembled
hydraulically driven using windrower Reel speed 10 to 75 rpm (for harvest
hydraulic system speeds up to 11.5 mph)
1400 strokes per minute Hydraulic Reel Lift
Knife stroke - 3.35 in. (85mm) In-cab controlled auto reel-speed for
groundspeed synchronization
CUTTING SYSTEMS
Schumacher EasyCut OTHER EQUIPMENT
system with spring steel guards; bolt- Slow Speed On-farm Transport with
on plated knife sections; and Tires/Wheels/ and Tongue
Rollerguide knifeback guide system Draper Guard (former Hay Guard)
Tilt Angle Range: 2-8 degrees
Min. Cut Height: 0.75 in (19mm) at 8 WARRANTY
degrees tilt New Holland Standard Warranty Applies
Models
COMMERCIAL KNIFE REEL DELIVERY Weight Factory Data List Price
MODEL
DURASWATH 425HB Single Knife SINGLE REEL STD DECK 4,675 LB $46,006.00
DURASWATH 425HB Single Knife SINGLE REEL DOUBLE SWATH 4,675 LB $51,024.00
DURASWATH 425HB Double Knife SINGLE REEL STD DECK 4,675 LB $50,712.00
DURASWATH 425HB Double Knife SINGLE REEL DOUBLE SWATH 4,675 LB $55,730.00
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
449338 UII SNGL STEEL 6 BAT $968.00
449339 UII SNGL PLASTIC 6 BAT No Charge
449352 HCC SNGL PLASTIC 6B FOVER ($440.00)
TRANSPORT
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles $1,206.00
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
LANGUAGE KITS
OPTIONAL EQUIPMENT
Standard Equipment
30 ft. (9.1m) cutting width DRAPER BELTS
42 in. rubberized polyester, with
CROP DISCHARGE OPENING WIDTHS: fiberglass reinforced, tie bar
Center-delivery opening- 56-72" (1.42- connections
1.83) Moulded V-Guide belt tracking
*back panel opening can be increased Draper speed in-cab adjustable flow
to 80" by removing extension panels at control from 0 to 750 ft./minute
each side of the center opening* Rubber vulcanized drive rolls with
Double-swath side opening - 55-65 in. V-guide
(1.37-1.65m) Belt angle - 15 degrees at 2 degree tilt
Double-swath includes hydraulic deck
shift REEL
UII reel with end-tine package
KNIFE DRIVE Chain reduction Hydraulic Drive with 60
Single Knife cu. in. (.74L) motor
Schumacher ProDrive knife drive system, Reel shipped fully assembled
hydraulically driven using windrower Reel speed 10 to 75 rpm (for harvest
hydraulic system speeds up to 11.5 mph)
1400 strokes per minute Hydraulic Reel Lift
Knife stroke - 3.35 in. (85mm) In-cab controlled auto reel-speed for
groundspeed synchronization
CUTTING SYSTEMS
Schumacher EasyCut OTHER EQUIPMENT
system with spring steel guards; bolt- Slow Speed On-farm Transport with
on plated knife sections; and Tires/Wheels/ and Tongue
Rollerguide knifeback guide system Draper Guard (former Hay Guard)
Tilt Angle Range: 2-8 degrees
Min. Cut Height: 0.75 in (19mm) at 8 WARRANTY
degrees tilt New Holland Standard Warranty Applies
Models
COMMERCIAL KNIFE REEL DELIVERY Weight Factory Data List Price
MODEL
DURASWATH 430HB Single Knife SINGLE REEL STD DECK 5,631 LB $52,429.00
DURASWATH 430HB Single Knife SINGLE REEL DOUBLE SWATH 5,631 LB $54,785.00
DURASWATH 430HB Double Knife SINGLE REEL STD DECK 5,631 LB $55,221.00
DURASWATH 430HB Double Knife SINGLE REEL DOUBLE SWATH 5,631 LB $57,577.00
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
449338 UII SNGL STEEL 6 BAT $968.00
449339 UII SNGL PLASTIC 6 BAT No Charge
449352 HCC SNGL PLASTIC 6B FOVER ($440.00)
WHEEL KITS
TRANSPORT
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles $1,206.00
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
LANGUAGE KITS
OPTIONAL EQUIPMENT
Standard Equipment
36 ft. (11m) cutting width DRAPER BELTS
42 in. rubberized polyester, with
CROP DISCHARGE OPENING WIDTHS: fiberglass reinforced, tie bar
Center-delivery opening- 56-72" (1.42- connections
1.83) Moulded V-Guide belt tracking
*back panel opening can be increased Draper speed in-cab adjustable flow
to 80" by removing extension panels at control from 0 to 750 ft./minute
each side of the center opening* Rubber vulcanized drive rolls with
Double-swath side opening - 55-65 in. V-guide
(1.37-1.65m) Belt angle - 15 degrees at 2 degree tilt
Double-swath includes hydraulic deck
shift REEL
UII reel with end-tine package
KNIFE DRIVE Chain reduction Hydraulic Drive with 60
Single Knife cu. in. (.74L) motor
Schumacher ProDrive knife drive system, Reel shipped fully assembled
hydraulically driven using windrower Reel speed 10 to 75 rpm (for harvest
hydraulic system speeds up to 11.5 mph)
1400 strokes per minute Hydraulic Reel Lift
Knife stroke - 3.35 in. (85mm) In-cab controlled auto reel-speed for
groundspeed synchronization
CUTTING SYSTEMS
Schumacher EasyCut OTHER EQUIPMENT
system with spring steel guards; bolt- Slow Speed On-farm Transport with
on plated knife sections; and Tires/Wheels/ and Tongue
Rollerguide knifeback guide system Draper Guard (former Hay Guard)
Tilt Angle Range: 2-8 degrees
Min. Cut Height: 0.75 in (19mm) at 8 WARRANTY
degrees tilt New Holland Standard Warranty Applies
Models
COMMERCIAL KNIFE REEL DELIVERY Weight Factory Data List Price
MODEL
DURASWATH 436HB Double Knife SINGLE REEL STD DECK 6,702 LB $64,158.00
DURASWATH 436HB Double Knife SINGLE REEL DOUBLE SWATH 6,702 LB $66,581.00
DURASWATH 436HB Double Knife SPLIT REEL STD DECK 6,702 LB $70,576.00
DURASWATH 436HB Double Knife SPLIT REEL DOUBLE SWATH 6,702 LB $72,999.00
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
449339 UII SNGL PLASTIC 6 BAT No Charge
449340 UII SPLIT PLASTIC 6 BAT No Charge
449352 HCC SNGL PLASTIC 6B FOVER ($1,128.00)
449353 HCC SPLIT PLASTIC 6B FOVER ($5,680.00)
WHEEL KITS
TRANSPORT
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles $1,206.00
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
LANGUAGE KITS
OPTIONAL EQUIPMENT
Standard Equipment
40 ft. (12.1m) cutting width DRAPER BELTS
42 in. rubberized polyester, with
CROP DISCHARGE OPENING WIDTHS: fiberglass reinforced, tie bar
Center-delivery opening- 56-72" (1.42- connections
1.83) Moulded V-Guide belt tracking
*back panel opening can be increased Draper speed in-cab adjustable flow
to 80" by removing extension panels at control from 0 to 750 ft./minute
each side of the center opening* Rubber vulcanized drive rolls with
Double-swath side opening - 55-65 in. V-guide
(1.37-1.65m) Belt angle - 15 degrees at 2 degree tilt
Double-swath includes hydraulic deck
shift REEL
UII reel with end-tine package
KNIFE DRIVE Chain reduction Hydraulic Drive with 60
Single Knife cu. in. (.74L) motor
Schumacher ProDrive knife drive system, Reel shipped fully assembled
hydraulically driven using windrower Reel speed 10 to 75 rpm (for harvest
hydraulic system speeds up to 11.5 mph)
1400 strokes per minute Hydraulic Reel Lift
Knife stroke - 3.35 in. (85mm) In-cab controlled auto reel-speed for
groundspeed synchronization
CUTTING SYSTEMS
Schumacher EasyCut OTHER EQUIPMENT
system with spring steel guards; bolt- Slow Speed On-farm Transport with
on plated knife sections; and Tires/Wheels/ and Tongue
Rollerguide knifeback guide system Draper Guard (former Hay Guard)
Tilt Angle Range: 2-8 degrees
Min. Cut Height: 0.75 in (19mm) at 8 *Only compatible with Speedrower
degrees tilt 200/240
WARRANTY
New Holland Standard Warranty Applies
Models
COMMERCIAL KNIFE REEL DELIVERY Weight Factory Data List Price
MODEL
DURASWATH 440HB Double Knife SPLIT REEL STD DECK 7,300 LB $69,441.00
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
SD_H5601 REEL
449340 UII SPLIT PLASTIC 6 BAT No Charge
WHEEL KITS
TRANSPORT
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles $1,206.00
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
LANGUAGE KITS
OPTIONAL EQUIPMENT
COMPLETING PACKAGES
CONDITIONER TYPE
LANGUAGE KITS
Models
COMMERCIAL MODEL HYD HEADER TILT Weight Factory Data List Price
BF2330 Hyd Header Tilt 940 LB $4,692.00
MISC.
MEGACUTTER™ 512
US PRICE LIST
(Port of Entry)
Standard Equipment
New Holland MegaCutter™ mounted -Semi-Swinging V-tine Concept allows
triple mower-conditioners offer big the flail tines to pass obstructions
capacity, maximum efficiency, and and prevent the tines from swinging
more versatility for today's large livestock overcenter maintaing the proper
operations and custom harvesters. position for crop pickup.
MEGACUTTER™ 512
US PRICE LIST
(Port of Entry)
Standard Equipment
MegaCutter 512 SPECIFICATIONS OPTIONAL EQUIPMENT
Cutting Width 11ft. 10 in. (3.5m) -MegaCutter 512
Cutting Height 2 to 4 in. Cat 2 Front A-Frame Hitch Num.
Discs 9 1 3/8-21 Spline PTO Yoke Headland
Lift 16 in. (40cm) Flat or 3/4" (20mm) Skid Shoes PTO
Speed 1000 RPM Crop Divider Kit
PTO Rotation CW or CCW
PTO Coupler 1 3/8 - 6 Spline *MUST ORDER Cat 2 Front A-Frame
Power Req. 90hp(70kw) 726639 hitch if the tractor is not already
Transport Width 10 ft. 11in. (3.4m) equipped.*
Hitch A-frame
Hitch Category Cat-II **Available to be ordered as a 'stand
Hydraulic Req. 1 SA Valve alone unit'. Required to indicate on PO
Weight 2976 lbs(1350kg) line in eQuipment when ordering:
"Stand Alone Unit".**
HEAD DRIVELINE
Friction Slip Clutch and Overrunning WARRANTY
Clutch -New Holland Standard Warranty
Applies
Models
MEGACUTTER™ 512
US PRICE LIST
(Port of Entry)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
MEGACUTTER OPTIONS
MEGACUTTER OPTIONS
MANUALS
MEGACUTTER™ 512
US PRICE LIST
(Port of Entry)
Factory Supplied Attachments
MEGACUTTER™ 530
US PRICE LIST
(Port of Entry)
Standard Equipment
New Holland MegaCutter™ mounted -Multi-Speed Rotor and adjustable
triple mower-conditioners offer big conditioning hood provides a wide
capacity, maximum efficiency, and range of conditioning intensities to
more versatility for today's large livestock suited both delicate legumes and
operations and custom harvesters. more robust grass crops.
MEGACUTTER™ 530
US PRICE LIST
(Port of Entry)
Standard Equipment
MegaCutter 530 SPECIFICATIONS INDIVIDUAL HEAD DRIVELINES
Cutting Width 29 ft. 6 in. (9.0m) Independent Friction Slip Clutch
Cutting Height 2 to 4 in. Independent Overrunning Clutch
Num. Discs 16 (8x2)
Headland Lift 24 in. (60cm) OPTIONAL EQUIPMENT
PTO Speed 1000 RPM -MegaCutter 530
PTO Coupler 1 3/8 - 21 Spline 1 3/4-20 Spline PTO Yoke
Power Req. 210hp (155kw) Flat or 3/4" (20mm) Skid Shoes
Hitch Cat II & III Flip Over Wide Spread Kit
Hydraulic Req. Crop Divider Kit
Num. Valves 1 DA and 1 SA
Flow Rate 6.5-13.25 gpm WARRANTY
(25-50 lpm) -New Holland Standard Warranty
Presure 2175-2900 psi Applies
150-200 bar
Weight 7090lbs(3216kg)
Elec. Req. 12V 3-PIN & 7-PIN
lighting connector
Models
MEGACUTTER™ 530
US PRICE LIST
(Port of Entry)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
MEGACUTTER OPTIONS
MEGACUTTER™ 530
US PRICE LIST
(Port of Entry)
MANUALS
MEGACUTTER™ 530
US PRICE LIST
(Port of Entry)
Factory Supplied Attachments
Part Number Description H7220 H7320 H7230 H7330 H7450 H7550 H7460 H7560
84267895 W ide Thin Fin kit X X X X X X
84294045 Steel chevron conditioning roll (top) X
84294042 Steel chevron conditioning roll (bottom) X
84294053 Steel chevron conditioning roll (top) X X
84294055 Steel chevron conditioning roll (bottom) X X
86533312 1-3/4 in., 20-tooth spline yoke for 1000 rpm primary PTO X X
1-3/4 in., 20-tooth spline yoke for 1000 rpm primary PTO on
86539412 standard tongue models X X
86560326 1-3/4 in., 20-tooth spline yoke for 1000 rpm primary PTO w/ X X X X
86578390 Two-point swivel hitch category 3 attachment pins X X X X
HF141130DS Quick-Hitch bushing adapter kit (2-pt. swivel hitch only) X X X X
86603195 Crop guide - for down and tangled crop; installs on right side X X X X
ShockPRO™ hub repair kit, MowMax true modular cutterbar X X X X X X X X
87580643
715264006 Hydraulic header tilt kit X X
High stubble kit (includes 8 skid shoes) - increases cutting
715289026 height by 1.3 inches (33mm) X X X X X X X X
540 rpm PTO primary PTO assembly X X
715290026
715291016 1000 rpm PTO primary PTO assembly X X
Tire bumper extension (for standard tongue models only)
required with some tractors to prevent primary PTO damage
716422001 X X
86538996 Low speed rotor kit - for 730 rpm rotor speed X
86605015 Low speed rotor kit - for 726 rpm rotor speed X X
716536026 Low speed rotor kit - for 718 rpm rotor speed X
716537036 Textured hood liner kit X
716537046 Textured hood liner kit X X
716537056 Textured hood liner kit X
Tow bar for 2-point hitch swivel hitch models; includes safety
716548006 tow chain kit and hardware X X X X X X
87532974 Corner marker kit - for better visibility of the header ends for X X X X
717002026 Crop dividers - pair of 2 dividers for each end of header X X X X
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
MODEL HS SICKLE HEAD DRIVE ADAPTER KITS
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
Part Number
CAB RELATED KITS
87027859 1 X X X X X X
84247852 Rotary beacon (requires 87027859 mounting kit) 1 X X X X X X
Panoramic external rearview mirror (1). Can be attached to
existing electric adjust mirror support on either side of cab.
For use with electric adjust mirrors only; not compatible with
84814470 standard external cab mirrors. 1 X X X X X X
Front cab window sun screen kit. Included in factory installed
82004428 deluxe cab upgrade package (725843076) 0.5 X X X X X X
Rear cab window sun screen kit. Included in factory installed
86627943 deluxe cab upgrade package (725843076) 0.5 X X X X X X
Premium radio speaker kit. Upgrades 2 existing speakers
84081897 and adds 2 additional speakers. 1 X X X X X X
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
Standard rear axle weight carrier bracket (300 lb/136 kg) for
H8000 Series only. W eight carrier only, does not include
ballast weights. Suitcase weights recommended are part
number 718215036, front ballast weights for compact tractors
(100 lbs. each). Recommend 6 ballast weights for 30-foot
heads and 8 ballast weights for 36-foot heads.
87581795 4 X X X
Air suspension rear axle weight carrier bracket (400 lb/181 kg)
for H8000 Series only. W eight carrier only, does not include
ballast weights. Suitcase weights recommended are part
number 718215036, front ballast weights for compact tractors
(100 lbs. each). Recommend 6 ballast weights for 30-foot
heads and 8 ballast weights for 36-foot heads.
87628996 3 X X X
84545478 Ballast W eights - individual 50 lb plates for rear ballast X X X
Approx
Install
Time
Part Number Description (Hrs.) H8040 H8060 H8080 SR130 SR200 SR240
MISCELLANEOUS KITS
Part Number
Swath roller hitch receiver kit. Includes a weld-on hitch
receiver (2 in. by 2 in. or 5.08cm by 5.08cm). Hitch extension
must be procured locally. Only for use in towing a swath roller
in field operation having a maximum roller weight of 1000 lbs.
(453 kg) and maximum vertical load of 150 lbs. (68 kg).
87634089 0.5 X X X X X X
84059809 Service light (magnetic base with 32 ft. cord and 12v plug) 0.05 X X X X X X
717236006 Deluxe head tilt indicator kit 1 X X
Head lift arm quick latch kit. Replaces the standard manually
87560864 installed head attaching lift arm locking pins. 0.3 X X
Head lift arm quick latch kit. Replaces the standard manually
84598213 installed head attaching lift arm locking pins. 0.3 X X X X
Approx.
Install
Time Durabine™ Durabine™
Part Number Description (Hrs.) 720HD 750HD 770HD 720TD** 820TD** 416 419
84294053 Steel chevron conditioning roll (top) 2 X X X X X X
84294055 Steel chevron conditioning roll (bottom) 2 X X X X X X
Slatted steel conditioner rolls (for aggressive conditioning of
cane-type crops). Order two to complete a machine. Refer
to Service Bulletin 2000/7 - H5 for additional parts and
86594327 installation requirements. 4 X X X X X X
37 - tooth driven sprocket for auger drive on model 750HD
86620746 Specialty Head only. Reduces auger speed by 10%. 0.3 X
87010547 Auger flighting reinforcement kit 4 X
High contact conditioning rolls (order quantity of 2 to
complete a head). Compatible with 2355, 2358, 750HD and
87379229 770HD heads. Allow 4 months order lead time. 5 X X X X
87580643 Standard MowMax™ ShockPRO™ hub replacement kit 0.15 X X X X X
715289026 High stubble kit (includes 8 skid shoes) - increases cutting 1.5 X X X X X
715301056 Gauge wheels (set of 2) 0.6 X X
716537046 Textured liner kit - provides more aggressive conditioning 0.5 X
716695036 Push bar and divider kit (for tall crops) 0.5 X X X X X
87524917 Rolling crop dividers- kit of 2 disc; 2 required for each end 1 X X X X X
Corner marker kit - for better visibility of the head ends for
87532974 operation and transport 0.5 X X X X X X X
717002026 Crop dividers - pair of 2 dividers; one for each end of head 0.5 X X X X X
60-inch opening closure kit (required for use when the
717701006 conditioner module is removed). 0.5 X X
83-inch opening closure kit (required for use when the
717702006 conditioner module is removed). 0.5 X X
Conversion kit to attach MY2002 to MY2004 (serial number
656825 to 1130516) model 2355 disc head to HW -5 or
H8000 Series W indrower. Refer to ASIST for more
87059188 conversion information. 3.5
Fits all prior model 2300 series Discbine heads. Order quantity to match
87602273
ShockPRO™ retrofit kit (retrofits 2 discs) For small disc .3 per number of discs to retrofit. Discs with an external input drive shaft do not get
modular cutterbars. disc a ShockPRO hub. Quantity of 1 retrofits two discs.
84393813 MowMax™ II ShockPRO Hub replacement hub kit 0.15 X X
84395614 Rolling crop dividers- kit of 3 discs; 3 required for each end 0.5 X X
60-inch opening closure kit (required for use when the
84360151 conditioner module is removed). 1.0 X X
83-inch opening closure kit (required for use when the
84360482 conditioner module is removed). 1.0 X X
Approx.
Install 2330BF
Time Adapter
Part Number Description (Hrs.) HS12 HS14 HS16 HS18 Frame
84294036 Steel chevron conditioning roll (top) 2 X X X X
84294055 Steel chevron conditioning roll (bottom) 2 X X X X
Left-hand wear plate (for conditioner throat opening when in
86540464 abrasive soil conditioners). 0.3 X X X X
Right-hand wear plate (for conditioner throat opening when in
86540465 abrasive soil conditioners). 0.3
Slatted steel conditioner rolls (for aggressive conditioning of
cane-type crops). Order two to complete a machine. Refer
to Service Bulletin 2000/7-H5 for additional parts and
86594327 installation requirements. 4 X X X X
86614722 Stainless steel replacement floor center inserts (must order 0.3 X X X X
86614719 Outer stainless repair kit (qty. 2 left and right) 0.3 X
86614720 Outer stainless repair kit (qty. 2 left and right) 0.3 X
86614721 Outer stainless repair kit (qty. 2 left and right) 0.3 X
Push bar extension kit (for tall or cane-type crops).
86637579 For SP W indrower applications only. 1 X X X X
87010392 Reel truss kit 1 X X X
87010393 Reel truss kit 1 X
High contact conditioning rolls (order quantity of 3 to
complete a head). Compatible with 2200 series, 2300 series
87379229 and HS heads. Allow 4 months order lead time. 5 X X X X
87399670 Stub guard conversion kit 6.5 X X
87399912 Stub guard conversion kit 6.5 X X
715295006 Crop dividers (right and left included) 1.5 X X X X
715301066 Gauge wheels (set of 4). 1 X X X
Hydraulic reel drive kit for SP W indrower applications only.
Must be used in combination with SP W indrower hydraulic
716961076 reel kit to be functional. 2 X X X X
Adapter kit to adapt an HS series head to prior model 1475,
716988016 serial number 673016 and below 2 X X X
Kit to adapt an HS series head to prior model HW 300, serial
number 661082 and below; model HW 320, serial number
667225 and below or model 2450/2550. If the base unit does
not have the head reverser kit installed, order return hose
716988006 (part number 870103333). 2 X X X X
716990006 Completing Kit for 12- and 14-foot HS series heads 1 X
716991006 Completing Kit for 16- and 18-foot HS series heads 1 X
86643154 Closure Kit (Recommended for low volume hay) 1.5 X
715318001 Hydraulic head tilt kit for HS Haybine heads 1.5 X
Approx.
Install
Time
Part Number Description (Hrs.) HB0030 HB36
87681712 Junior Deck kit for double swath heads 1.5 X X
87681713 Side draper deck extension kit for center delivery units 2.5 X X
Cross auger kit for high volume crops such as Canola: prior
87734208 to s/n 25W S075481 3
Cross auger kit for high volume crops such as Canola: after
87755892 s/n 25W S085304 3
Cross auger kit for high volume crops such as Canola: prior
87734209 to s/n 30W S075507 3 X
Cross auger kit for high volume crops such as Canola: after
87755893 s/n 30W S085230 3 X
Cross auger kit for high volume crops such as Canola: prior
87734210 to s/n 36W S075510 3 X
Cross auger kit for high volume crops such as Canola: after
87755894 s/n 36W S85229 3 X
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 9/2/2013 1
*Small Square Balers
BC5050 (14'' x 18'' bale) 9/2/2013 2-3
BC5060 (14'' x 18'' bale) 9/2/2013 4-5
BC5070 (14'' x 18'' bale) 9/2/2013 6-8
BC5080 (16'' x 18'' bale) 9/2/2013 9 - 10
72 Belt-Type Bale Thrower 9/2/2013 11
* Weights defined as shipping weight includes crate weight when item is crate shipped
Page 1 of 56
-B2AB 01
Models
COMMERCIAL MODEL TWINE-WIRE Weight Factory Data List Price
BC5050 Twine 3,020 LB $21,595.00
COMPLETING PACKAGES
WAGON HITCH
HYDRAULIC KITS
LIGHT KITS
LANGUAGE KITS
Models
COMMERCIAL MODEL TWINE-WIRE Weight Factory Data List Price
BC5060 Twine 3,230 LB $23,371.00
BC5060 Wire 3,230 LB $24,342.00
COMPLETING PACKAGES
WAGON HITCH
HYDRAULIC KITS
LIGHT KITS
LANGUAGE KITS
Models
COMPLETING PACKAGES
WAGON HITCH
SD_41039 HITCH
715236 Clevis hitch 20 LB No Charge
For Hayliner Units Only
715243 Ball hitch 33 LB $200.00
HYDRAULIC KITS
LIGHT KITS
LANGUAGE KITS
Models
WAGON HITCH
SD_41039 HITCH
715243 Ball hitch 33 LB $200.00
LIGHT KITS
LANGUAGE KITS
Models
COMMERCIAL MODEL Weight Factory Data List Price
72 FOR BC5050 958 LB $7,527.00
72 FOR BC5060,BC5070 958 LB $7,527.00
LANGUAGE KITS
BIGBALER 330
US PRICE LIST
(PORT OF ENTRY)
Standard Equipment
BIGBALER 330 KEY SALES FEATURES: automatic reengagement
Next generation of New Holland "Silage - Speed 99 rpm
Ready” professional-grade large square - Width 31.5 in (800MM)
balers offer up to 20% more capacity - Diameter 26 in (650 mm)
with 48 sprokes per min and up to 5%
greater bale density compared to CROP CUTTER™ SYSTEM
BB9000 Series balers. - Direct transfer of crop to pre
The MaxiSweep™ pickup features new compression chamber.
s-shaped side sheets, over-shot and - Knives Hydraulically Engaged from
undershot feed augers, and a Tractor.
powered feed assist roller to keep - Full access knife drawer slides to left
crop moving into the feeder channel side of baler.
for high-capacity baling operations. - Blanking Plates Replace Knives are not
in use.
BALE DIMENSIONS - Automatic rest knives are protected
Width 35.4 in. (900mm) by springs
Height 31.5 in. (800mm) - Short Cut Rotor Package STANDARD:
Max. Length 108 in. (2500mm) - (19) Hard-faced knives with short
cut spacing of 1.5 in. (39mm).
MAXISWEEP™ PICKUP - Medium Cut Rotor Package OPTION:
- Full width feed assist roller with - (9) Hard-faced knives with medium
overshot-undershot augers at both cut spacing of 3.1 in. (79mm).
ends, "S" shaped side-sheets, and
spring suspended roller windguard STUFFER SYSTEMS
for smooth feeding of over width - Gearbox Driven Stuffer Assembly
windrows. - Standard Model
- Windguard and pickup gauge wheels - Forks type w/ 4 tines
adjust without tools. - Packer Cutter Model
-Fork type w/ 6 tines
PICKUP DIMENSIONS/STD. FEATURES - Rotor Cutter Model
- 77 in. flare-to-flare - Forks type w/ 4 tines
- 70 in. tine-to-tine
- Gauge wheels (2) 15 x 6.00-6, 4PR PRE-CHARGE CHAMBER
- Standard Crop Flares - Chamber fill crop sensor plates and
- Curved Steel Coil Tines SmartFill™ right/left driving indicator
- Profiled 2mm pickup guards/bands system.
BIGBALER 330
US PRICE LIST
(PORT OF ENTRY)
Standard Equipment
direct from gearbox
POWER REQUIREMENTS
KNOTTING & TWINE CAPACITY - Standard Model
- (4) Heavy Duty Double-Tie Knotters 102 PTO hp minimum
- Knotter Drive - gearbox and shaft 120 PTO hp recommended
- (2) Knotter Fans
- Twine Capacity - 32 balls - Packer Cutter Model
110 PTO hp minimum
MONITORS: 130 PTO hp recommended
- Virtual Terminal Capability (ISOBUS)
for use with IntelliView™ III or IV - Rotor Cutter Model
monitors. 130 PTO hp minimum
- Bale Drop Indicator (roller chute only) 145 PTO hp recommended
WARRANTY
New Holland Standard Warranty Applies
BIGBALER 330
US PRICE LIST
(PORT OF ENTRY)
Models
COMMERCIAL MODEL FEEDING SYSTEM Weight Factory Data List Price
BIGBALER 330R Rotor Cutter SEE CHART $129,192.00
BIGBALER 330P Packer Cutter SEE CHART $121,105.00
BIGBALER 330S Standard SEE CHART $113,665.00
COMPLETING PACKAGES
SD_15001 AXLES
422090 Lg Steer Tandem Axle w/hyd br $11,819.00
422237 Large Steer Tandem Axle $10,326.00
722446 AutoSteer tandem axle w/hyd br $10,399.00
722448 AutoSteer tandem axle $8,905.00
722007 Single axle w/hyd br $2,977.00
722325 Single Axle No Charge
P. T. O. OPTIONS
SD_03011 PTO
722001 1-3/8 in. 21 spline No Charge
722376 1-3/4in. 20 spline No Charge
BIGBALER 330
US PRICE LIST
(PORT OF ENTRY)
BALE CHUTES
CAMERA
SD_21014 CAMERAS
712828 Camera Kit FI $1,218.00
LIGHT KITS
MISCELLANEOUS
SD_39042 BUMPER
422170 Bumper FF $319.00
BIGBALER 330
US PRICE LIST
(PORT OF ENTRY)
OPERATOR'S MANUALS
BIGBALER 340
US PRICE LIST
(PORT OF ENTRY)
Standard Equipment
BIGBALER 340 KEY SALES FEATURES:
Next generation of New Holland "Silage PRECHAMBER FEEDING SYSTEMS
Ready” professional-grade large square -Standard Model
balers offer up to 20% more capacity - 3 Packer forks w/ 9 tines
with 48 sprokes per min and up to 5% - Rotor Cutter Model
greater bale density compared to - "W" style rotor with paired offset
BB9000 Series balers. lobes and cutout clutch with
The MaxiSweep™ pickup features new automatic reengagement
s-shaped side sheets, over-shot and - Speed 99 rpm
undershot feed augers, and a - Width 47.2 in (1200mm)
powered feed assist roller to keep - Diameter 26 in (650 mm)
crop moving into the feeder channel
for high-capacity baling operations. CROP CUTTER™ SYSTEM
- Direct transfer of crop to pre
BALE DIMENSIONS compression chamber.
Width 47.2 in. (1200mm) - Knives Hydraulically Engaged from
Height 35.4 in. (900mm) Tractor.
Max. Length 108 in. (2500mm) - Full access knife drawer slides to left
side of baler.
MAXISWEEP™ PICKUP - Blanking Plates Replace Knives are not
-Full width feed assist roller with in use.
overshot-undershot augers at both - Automatic rest knives are protected
ends, "S" shaped side-sheets, and by springs
spring suspended roller windguard - Short Cut Rotor Package STANDARD:
for smooth feeding of over width - (29) Hard-faced knives with short
windrows. cut spacing of 1.5 in. (39mm).
-Windguard and pickup gauge wheels - Medium Cut Rotor Package OPTION:
adjust without tools. - (15) Hard-faced knives with
medium cut spacing of 3.1 in.
PICKUP DIMENSIONS/STD. FEATURES (79mm).
- Standard Model
- 88 in. flare-to-flare STUFFER SYSTEMS
- 81 in tine-to-tine - Gearbox Driven Stuffer Assembly
- Gauge wheels (2) 15 x 6.00-6, 4PR - Standard & Rotor Model
- Standard Crop Flares - Forks type w/ 4 tines
- Curved Steel Coil Tines
- Profiled 2mm pickup guards/bands PRE-CHARGE CHAMBER
- Chamber fill crop sensor plates and
- Rotor Cutter Model SmartFill™ right/left driving indicator
- 92.6 in. flare-to-flare system.
- 86.6 in tine-to-tine
- Gauge wheels (2) 15 x 6.00-6, 4PR CHAMBER & PLUNGER
- Standard Crop Flares - Bale Density System - adjustable,
- Curved Steel Coil Tines Automatic
- Profiled 2mm pickup guards/bands - Full Bale & Partial Bale Eject-tractor
BIGBALER 340
US PRICE LIST
(PORT OF ENTRY)
Standard Equipment
remotes required for operation
- Plunger Speed - 48 SPM
- Plunger Stroke - 28 in. (710mm) POWER REQUIREMENTS
- Plunger Drive - triple reduction drive - Standard Model
direct from gearbox 122 PTO hp minimum
140 PTO hp recommended
KNOTTING & TWINE CAPACITY
- (6) Heavy Duty Double-Tie Knotters - Rotor Cutter Model
- Knotter Drive - gearbox and shaft 150 PTO hp minimum
- (3) Knotter Fans 165 PTO hp recommended
- Twine Capacity - 32 balls
HYDRAULIC REQUIREMENTS
MONITORS: - (1) Single Acting for pickup lift
- Virtual Terminal Capability (ISOBUS) - (1) Double Acting for bale
for use with IntelliView™ III or IV ejector/tandem axle
monitors. - (1) Double Acting Remote Valve to
- Bale Drop Indicator (roller chute only) operate cutter knife system
BIGBALER 340
US PRICE LIST
(PORT OF ENTRY)
Models
COMMERCIAL MODEL FEEDING SYSTEM Weight Factory Data List Price
BIGBALER 340S Standard SEE CHART $139,188.00
BIGBALER 340R Rotor Cutter SEE CHART $155,485.00
COMPLETING PACKAGES
SD_15001 AXLES
422090 Lg Steer Tandem Axle w/hyd br $11,819.00
422237 Large Steer Tandem Axle $10,326.00
722446 AutoSteer tandem axle w/hyd br $10,399.00
722448 AutoSteer tandem axle $8,905.00
722007 Single axle w/hyd br $2,977.00
722325 Single Axle No Charge
P. T. O. OPTIONS
SD_03011 PTO
722376 1-3/4in. 20 spline No Charge
BIGBALER 340
US PRICE LIST
(PORT OF ENTRY)
BALE CHUTES
CAMERA
SD_21014 CAMERAS
712828 Camera Kit FI $1,218.00
LIGHT KITS
MISCELLANEOUS
SD_39042 BUMPER
422170 Bumper FF $319.00
BIGBALER 340
US PRICE LIST
(PORT OF ENTRY)
OPERATOR'S MANUALS
TIRES
27 x 9.50 x 15, 4 PR
COMPLETING PACKAGES
LANGUAGE KITS
COMPLETING PACKAGES
COMPLETING PACKAGES
GAUGE WHEELS
MANUALS
OPERATORS
COMPLETING PACKAGES
HYDRAULIC KITS
LANGUAGE KITS
COMPLETING PACKAGES
HYDRAULIC KITS
LANGUAGE KITS
COMPLETING PACKAGES
HYDRAULIC KITS
LANGUAGE KITS
HYDRAULIC KITS
WHEEL KITS
LANGUAGE KITS
COMPLETING PACKAGES
PTO OPTIONS
SD_03011 PTO
726527 540 RPM 80 LB No Charge
726528 1000 RPM 101 LB No Charge
LANGUAGE KITS
COMPLETING PACKAGES
SD_B6101 BELTS
726664 MRT Laced Belt No Charge
726802 Premium Laced Belt $1,248.00
PTO OPTIONS
SD_03011 PTO
726527 540 RPM No Charge
726528 1000 RPM No Charge
HYDRAULIC KITS
GAUGE WHEELS
MANUALS
OPERATORS
COMPLETING PACKAGES
SD_B6101 BELTS
726664 MRT Laced Belt ($1,248.00)
726802 Premium Laced Belt No Charge
726803 Endless Belt $2,135.00
PTO OPTIONS
SD_03011 PTO
726527 540 RPM (WPU Only) No Charg e
726528 1000 RPM (WPU Only) No Charge
726871 540 RPM Gearbox-COC $417.00
726872 1,000 RPM Gearbox-COC $1,097.00
GAUGE WHEELS
MANUALS
OPERATORS
*Manufacturer's Rating
Page 50 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - LARGE SQUARE BALERS
BigBaler 330 BigBaler 330 BigBaler 330 BigBaler 340 BigBaler 340
Part Number Description Standard Packer Rotor Standard Rotor
87485071 Roller Bale Chute X X X
87485072 Roller Bale Chute X X
710686024 Mounting Bracket (T6000/T7000) X X X X X
84229181 ISO Cat III (D39) Drawbar Kit - Ball only (39mm hole for 38mm pin) X X X X X
VT Power Supply Cable (for ISOBUS tractors with less then 30 amp
84111712 outlet) X X X X X
Fill flow kit (for standard models only-raised bottom liner pre-
84067141 compression chamber for difficult silage conditions) X
Fill flow kit (for standard models only-raised bottom liner pre-
84067373 compression chamber for difficult silage conditions) X
Top fill improvement in extreme silage (may affect other crops) for
84110457 Rotor Cut units only X X
Rotor side filler plates in extreme silage conditions for Rotor Cut units
84193332 only X X
Top & side liners pre-chamber in extreme silage conditions for Rotor
84193336 Cut units only X X
Needle cleaning Kit - Dual plunger tines to remove grass from
84112219 needles. Spec. silage conditions X X X
Needle cleaning Kit - Dual plunger tines to remove grass from
84112218 needles. Spec. silage conditions X X
Needle slot baffle Kit (4 knotters) - Reduces stalk (corn, sudan grass
84206215 and sugar cane) interference with knotting X X X
Needle slot baffle Kit (6 knotters) - Reduces stalk (corn, sudan grass
84206216 and sugar cane) interference with knotting X X
84391586 Knotter & needle lights kit FI X X X X X
84220384 Pick-up lights (2 LED) kit FI X X X X X
84263301 Rear Bumper-FI X X X
84263302 Rear Bumper-FI X X
84358647 Right Hand Side Top Handrail-FI X X X X X
84373293 Hand cleaning device + Storage box-FI X X X X X
84363931 Cut-out clutch kit-replaces pick-up plate style slipclutch (RC only) X X
84391581 Individual mistie sensor kit (4 knotters) X X X
84391592 Individual mistie sensor kit (6 knotters) X X
Bottom filler plate-(Low friction plastic plate bottom pre compression
84472837 chamber-standard baler only)-FI X
Bottom filler plate-(Low friction plastic plate bottom pre compression
84470839 chamber-standard baler only)-FI X
84483311 Rotary Beacon X X X X X
Page 51 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - LARGE SQUARE BALERS
BigBaler 330 BigBaler 330 BigBaler 330 BigBaler 340 BigBaler 340
Part Number Description Standard Packer Rotor Standard Rotor
84197176 K80 Ball hitch(80mm ball with spoon-type hitche end and bolts)- FI X X X X X
Top & side liners pre-chamber for improved flow in pre-chamber
84416338 (silage) X X
84110679 Kit 6 ABR knives(Hard faced knives for packer cutter)-FI X
Knife Drawer for 19 knives-(Upgrade from 9 knife drawer. No knives
84220363 included)-FI X X X
Knife Drawer for 29 knives-(Upgrade from 15 knife drawer. No knives
84220382 included)-FI X X
84600138 Mechanical Bale counter X X X X X
84427553 Bale weight system-must have 2-piece bale chute FI X X X
84427554 Bale weight system-must have 2-piece bale chute FI X X
High Performance Pick - up declutch kit-(stops pick-up instantly after
stuffer shearbolt breakage to reduce material build-up in pre-
84220222 chamber) X X
Electric bale length kit-(bale length setting and knotter trip from tractor
47401965 cab)-FI X X X X X
84358141 Camera Kit FI X X X X X
Upper feeder guards-(split upper feeder guards for stalky crops such
84517152 as corn stalks, sudan grass and sugar cane-standard units only)-FI X
Upper feeder guards-(split upper feeder guards for stalky crops such
84517150 as corn stalks, sudan grass and sugar cane-standard units only)-FI X
84577231 GPS Receiver kit-FI X X X X X
Four additional bale ejector tines at the rear of the bale case, two per
side, for extra grip to remove short slick materials such as straw and
47496858 later season silages-FI X X X X X
47531409 Twine box LED light kit-FI X X X X X
Page 52 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - ROUND BALERS
RollBelt™
Part Number Description BR7050 450 Utility BR7060 BR7070 BR7080 BR7090
87347870 Hyd Pickup Lift FI Round Balers (1.2 m, 1.5m, 1.8m pu only) X X X X
715030036 Crop Saver Whl Bdl (1.5m non-stuffer pu only) X X X X
87040143 Double Spring Kit X
717644006 Hyd Bale Ramp Kit 5x6 X
717644016 Hyd Bale Ramp Kit 4x6 X
87347926 Universal Control Box Mounting X X X X X X
87347920 Fire Extinguisher Kit X X
86635322 6-bar Pick p Conversion Kit (1.2m and 1.5m non-stuffer only) X
87016426 Left-Hand Pick Up Flotation Wheel X X
86642510 Bale Ramp kit (BR7060 Standard unit only) X
87588787 Chain Oiler Kit X X X X
84134365 Control Box Mounting Kit X
Dual Cam Kit for 1.5m pickup (for single cam non-silage
86900293 models) X X
87347749 External Expeller Roll Kit - 4' wide units X
87347750 External Expeller Roll Kit - 5' wide units X
Front Twine Box Kit to add 5 balls of twine (non-net models
87012393 only) X
Front Twine Box Kit to add 6 balls of twine (non-net models
87012399 only) X X
87012822 Green Feed Windguard Kit (1.5m non-stuffer pu only) X X X
Hydraulic Rotor Reverse Kit (for 7060NC and 7070NC
87619225 models only) Requires four (4) tractor remotes X X
87014799 Hydraulic Diverter Valve Kit (for tractors with only 3 remotes) X X
87347868 In-feed discs (standard on silage and 5x6 balers) X X X
87347783 Serpentine Roll Scaper Kit - 4' wide units X X
87347782 Serpentine Roll Scaper Kit - 5' wide units X X
87347817 Starter Roll Rake Kit X X
86642652 Trash Baffle Kit X
87024169 Monitor Kit (for BR7060 Standard unit only) X
84131631 PTO Support/Drawbar Pin Kit X X X X
Roller Windguard kit (Rotor Cutter models 7060NC and
87758500 7070NC only) X X
Page 53 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - ROUND BALERS
RollBelt™
Part Number Description BR7050 450 Utility BR7060 BR7070 BR7080 BR7090
87608707 4' Twine Kit (to add twine to net only baler) X
84134364 Bale Counter Kit (for RB450 Utility unit only) X
87757525 Bale Counter Kit (for BR7060 Standard unit only) X
87716797 Pickup Hand Crank Kit (for 2m XtraSweep models only) X X X
87012422 Apron Declutch Kit X
Gearbox Changeover Kit 540 rpm to 1000 rpm conversion
87702277 (non rotor units only) X X X X
87702276 Gearbox Changeover Kit 1000 rpm to 540 rpm conversion X
86635361 Spiral Back Wrap Roll X
87040143 Extra Spring for Bale Ramp (without axle mount) X
87692774 5' Twine Kit (to add twine to net only baler) X
87741422 Rubber Tine Conversion kit (64 tines) X X X
84204325 Pickup Gage Wheel X
84134364 Bale Counter Kit (for Roll-Belt 450 units only) X
84134360 Lacing Cable Kit CNH X
84134361 In-feed Disc Kit CNH X
84134365 Control Box Mount Kit CNH X
84134363 Heavy-duty Lacing Cable Kit X
84134362 Fire Extinguisher Kit CNH X
84134336 Standard Net Wrap Kit X
84134345 Deluxe Net Wrap Kit X
Page 54 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - ROLL-BELT 560 ROUND BALERS
Page 55 of 56
PARTS DIVISION SUPPLIED ACCESSORIES FOR CROP PACKAGING - BALEWAGONS
Page 56 of 56
MATERIAL HANDLING INDEX
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 9/2/2013 1
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
130 88 cu. ft. with T-Rod Apron 1,500 LB $10,141.00
LANGUAGE KITS
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
145 110 cu. ft. with T-Rod Apron 1,760 LB $10,550.00
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
155 132 cu. ft. with T-Rod Apron 1,960 LB $11,444.00
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
165 156 cu. ft. with T-Rod Apron 2,460 LB $12,043.00
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
185 170 cu. ft. Mech T-Rod Apron 2,820 LB $14,957.00
COMPLETING PACKAGES
LANGUAGE KITS
Models
COMMERCIAL MODEL Capacity Weight Factory Data List Price
195 272 cu. ft. Mech Single Apron 4,360 LB $17,285.00
COMPLETING PACKAGES
LANGUAGE KITS
LANGUAGE KITS
SD 03011 PTO
726843 1000 PTO 1-3/8IN 60 LB No Charge
For use on 425V & 2000S only
LANGUAGE KITS
SD_03011 PTO
726843 1000 PTO 1-3/8IN 60 LB $502.00
For use on 425V, 2000S only
540 PTO for use on 2600S only 55 LB $570.00
SD_12003 AXLES
726840 HD TANDEM AXL 10 BLT 800 LB $2,275.00
3400S only
(Marshfield, WI)
2600S TIRES
8503899 425X22.5 800 LB $1,356.00
3400S TIRES
8504899 445RX22.5 800 LB $1,603.00
8505899 21.5LX16.1-18 PR 1,000 LB $3,878.00
3400S for HD Tandem Axle Only
8506899 49X19X20 $4,239.00
8507899 700/50X22.5 1,200 LB $7,043.00
425V or 2600S TIRES
8502899 19LX16.1-10 P8502899 800 LB $2,326.00
SD M6201 SCALE
726850 Load Cells for DIGI-STAR SCALE (must order monitor below)
DuraTank 3400S $5,341.00
DuraTank 2000S $3,466.00
DuraTank 2600S $4,249.00
726851 Load Cells for DIGI-STAR SCALE-HD AXL (must order monitor below) $8,880.00
Only available on DuraTank™ 3400S w/ HD Axle Option
DIGI-STAR SCALE MONITORS (must order load cells above)
727094 GT400 Monitor $1,021.00
727095 GT460 Monitor with GPS system $2,805.00
727092 Automatic Start/Stop Function for NT460 SCALE w/GPS and Autolog $3,170.00
Only available on NT460 Scale
XM6201X NO SCALE No Charge
Part Number Description 130 145 155 165 185 195 M2080 M2090 2000S 2600S
715327003 Upper Beater NH 130 X
715328001 Fine Manure Slurry Pan NH 130 X
715329001 Front Splash Guard NH 130 X
715330001 Hydraulic Endgate NH 130 X
715331001 Slowdown speed apron kit all spreader models X X X X X
715327001 Upper Beater NH 145/155/165/185 X X X X
715328002 Fine Manure Slurry Pan NH 145/155/165/185 X X X X
715330002 Hydraulic Endgate NH 145/155 X X
715332002 Slurry Sides base kit NH 145 X
715329002 Splash guard NH 145/155/165/185 X X X X
715334001 Hydraulic Apron Control all apreader models X X X X X
715335001 Slurry Side Completing Bundle NH 155 X
715330003 Hydraulic Fluid Manure Endgate NH 165/185 X X
715335002 Slurry Sides Completing Bundle NH 165 X
715335003 Slurry Sides Completing Bundle NH 185 X
715327002 Upper Beater NH 195 X
715328003 Fine Manure Slurry Pan NH 195 X
715329003 Splash guard NH 195 X
715330004 Hydraulic Endgate NH 195 X
86978832 Tail Light Kit X X X X X X
856563 PTO front assembly to convert 540 rpm to 1000 rpm X X X X
86545182 Sheave Weld Assembly to convert 540 rpm to 1000 rpm X X X X
84221962 540 PTO Assembly (includes PTO shaft, sprocket and chains) X X
87048181 Electric Apron Control Kit X X
84359196 1000 RPM PTO X
47576405 540 RPM PTO X
Page 23 of 23
PULL-TYPE FORAGE INDEX
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Index 09/02/13 1
Forage Harvesters
Models 790, FP230, FP240 09/02/13 2-8
Flail Harvester
Model 38 Crop Choppertm 09/02/13 15
Forage Blower
Model F62B 09/02/13 16
Page 1 of 20
-FH1A 01
Models
COMMERCIAL ELECTRICAL PTO Weight Factory Data List Price
MODEL CONTROLS
790 No Metalert 540 rpm 2,850 LB $30,137.00
790 No Metalert 1000 rpm 2,850 LB $30,137.00
790 With Metalert 540 rpm 2,850 LB $35,552.00
790 With Metalert 1000 rpm 2,850 LB $35,552.00
Page 2 of 20
-FH1A 01 0021 000 02-SEP-13
-FH1A 01
WAGON HITCH
HYDRAULIC KITS
SPOUT EXTENSION
LANGUAGE KITS
Page 3 of 20
-FH1A 01 0021 000 02-SEP-13
-FH1C 01
Models
COMMERCIAL AXLE CROP ELECTRICAL Weight Factory Data List Price
MODEL PROCESSOR CONTROLS
FP230 Single Axle No Crop Processor With Metalert 4,750 LB $44,130.00
FP230 Single Axle With Crop Processor With Metalert 4,750 LB $57,626.00
FP230 Tandem Axle No Crop Processor With Metalert 4,750 LB $46,708.00
FP230 Tandem Axle With Crop Processor With Metalert 4,750 LB $60,204.00
Page 4 of 20
-FH1C 01 0021 000 02-SEP-13
-FH1C 01
COMPLETING PACKAGES
PTO OPTIONS
SD_03011 PTO
725223 1-3/4 in. 20 spline PTO 72 LB No Charge
725222 1-3/8 in. 21 spline PTO 77 LB No Charge
WAGON HITCH
SPOUT EXTENSION
Page 5 of 20
-FH1C 01 0021 000 02-SEP-13
-FH1C 01
LANGUAGE KITS
Page 6 of 20
-FH1C 01 0021 000 02-SEP-13
-FH1B 01
Models
COMMERCIAL AXLE CROP PROCESSOR Weight Factory Data List Price
MODEL
FP240 Single Axle No Crop Processor 5,550 LB $50,786.00
FP240 Single Axle With Crop Processor 5,550 LB $65,075.00
FP240 Tandem Axle No Crop Processor 5,550 LB $52,823.00
FP240 Tandem Axle With Crop Processor 5,550 LB $67,112.00
Page 7 of 20
-FH1B 01 0021 000 02-SEP-13
-FH1B 01
COMPLETING PACKAGES
PTO OPTIONS
SD_03011 PTO
725223 1-3/4 in. 20 spline PTO 72 LB No Charge
725222 1-3/8 in. 21 spline PTO 77 LB No Charge
WAGON HITCH
SPOUT EXTENSION
LANGUAGE KITS
Page 8 of 20
-FH1B 01 0021 000 02-SEP-13
-FH1G 01
Models
COMMERCIAL MODEL Weight Factory Data List Price
890W 800 LB $5,275.00
COMPLETING PACKAGES
COMPLETING PACKAGES
LANGUAGE KITS
Page 9 of 20
-FH1G 01 0021 000 02-SEP-13
-FH1G 02
Models
COMMERCIAL MODEL Weight Factory Data List Price
27P 1,100 LB $7,626.00
COMPLETING PACKAGES
COMPLETING PACKAGES
LANGUAGE KITS
Page 10 of 20
-FH1G 02 0021 000 02-SEP-13
-FH1G 03
Models
COMMERCIAL MODEL Weight Factory Data List Price
29P 1,200 LB $11,327.00
Includes the following Equipment
Finger Feed Auger (716278) $1,695.00
Page 11 of 20
-FH1G 03 0021 000 02-SEP-13
-FH1G 04
Models
COMMERCIAL MODEL Weight Factory Data List Price
824 900 LB $9,616.00
COMPLETING PACKAGES
COMPLETING PACKAGES
Page 12 of 20
-FH1G 04 0021 000 02-SEP-13
-FH1G 04
CONVERSION KITS
LANGUAGE KITS
Page 13 of 20
-FH1G 04 0021 000 02-SEP-13
-FH1G 05
Models
COMMERCIAL MODEL Weight Factory Data List Price
3PN 2,120 LB $19,843.00
LANGUAGE KITS
Page 14 of 20
-FH1G 05 0021 000 02-SEP-13
-FH1E 01
(Laredo, TX)
Standard Equipment
40 Free Swinging Double-Edged Rotor Hydraulic Lift Brackets
Knives Adjustable Trailer Hitch
3 Cutterhead Knives 27 x 7.50-15, 4 PR Implement Tires
Rock Shield
Spout Assembly WARRANTY
Adjustable Blower Paddles New Holland Standard Warranty Applies
Manual Controls
Slip Clutch Protection
Retractable Jack
Models
COMMERCIAL MODEL Weight Factory Data List Price
38CC 2,215 LB $18,233.00
LANGUAGE KITS
Page 15 of 20
-FH1E 01 0021 000 02-SEP-13
-FH1F 01
(Armstrong, IA)
Standard Equipment
60 in. Diameter Fan (8 paddles) WARRANTY
Adjustable Removable Wheels, New Holland Standard Warranty Applies
Feed Height 20.5 in. to 27.5 in.
Heavy-Duty Shearbolt Protected PTO
Integral Shielded
Adjustable Fan w/Replaceable Paddles
Water Inlet
12 in. Diameter Auger w/ 30° Angle Feed
540 rpm Drive
Models
COMMERCIAL MODEL Weight Factory Data List Price
F62 1,775 LB $12,237.00
Page 16 of 20
-FH1F 01 0021 000 02-SEP-13
PARTS DIVISION SUPPLIED ACCESSORIES FOR PT FORAGE
3PN HEADER
712262001 Crop Guide Kit
716235001 Skid Shoe Extension Kit
86520487 Filler Plate kit (ear corn loss)
27P HEADER
Page 19 of 20