Checklist For Changing Central Line Dressing
Checklist For Changing Central Line Dressing
1. Obtains sterile central line dressing kit and mask for patient.
2. Explains the procedure to patient and places a mask on
patient. If patient cannot tolerate a mask, directs him to turn
his head to the opposite side from the insertion site.
3. Places patient in a semi-Fowler’s position if tolerated;
lowers the siderail, and puts the bed at a working height.
4. Dons mask and clean procedure gloves and carefully
removes the old dressing by lifting and removing tape in the
direction of the catheter insertion. Remove catheter
stabilization device if used.
5. Inspects catheter, insertion site and surrounding skin for
complications.
6. Removes gloves and performs hand hygiene.
7. Sets up a sterile field and opens and arranges dressing
kit supplies.
8. Cleans the insertion site with an antiseptic swab.
a. If using chlorhexidine-containing products (preferred),
uses a back-and-forth motion and friction for at least 30
seconds
b. If using alcohol or 2% tincture of iodine,
starts at the insertion site and works outward
2 to 3 inches in a circular pattern.
9. Allows site to dry; does not fan
10. Applies a new sterile catheter stabilization device, if one
is available.
11. Labels the dressing with the date changed, time, and
initials.
12. Removes mask and gloves and mask from patient.
13. Places patient in a comfortable position, raises siderail, and
places call light so it is accessible.
14. Disposes of supplies into the appropriate receptacles.
Unsatisfactory (Must document how the staff was unsatisfactory on the reverse side of this form)