Professional Documents
Culture Documents
Acids, Bases & Salts
Acids, Bases & Salts
CHEMISTRY |STD. X
ACIDS, BASES & SALTS
CHAPTER–2
Classification of acids
INTRODUCTION
(I) On the basis of their source acids are of two
A wide variety of materials consists essentially of type :
elements and compounds hav i ng diff erent (i) Mineral acids ; (ii) Organic acids
characteristics exist around us. Some of them are (i) Mineral Acids (Inorganic acids) :
sour, some are bitter, while some are salty in taste. The acids which are usually obtained from minerals
are known as inorganic acids.
Example : Sour and bitter tastes of food are due
Name Chemical Where found or used
to acids and bases, respectively, present in them. Formula
Acids react with bases to produce salt whose Hydrochloric acid HCl In purification of common salt,
in textile industry as bleaching
properties are different from acid and base. agent, to make aqua regia.
Nitric acid Hydrogen ion Nitrate ion Tartaric acid Present in tamarind.
(ii) On the Basis of their Basicity : (III) Classification on the basis of their strength –
"The basicity of an acid is the number of (i) Strong Acid :
replaceable hydrogen atoms present in a molecule The acid which undergoes complete ionisation in
that can be produced by the complete ionisation of aqueous solution are known as strong acids.
one molecule of that acid in aqueous solution." Example : Complete ionised
or HCl + Water H+(aq) + Cl –(aq)
H 2SO 4 + Water 2H+(aq) + SO42–(aq)
"Basicity of an acid is determined by number of
HNO 3 + Water H+(aq) + NO 3– (aq)
hydronium ions (H 3 O + /H + (aq)) produced per
(ii) Weak Acid :
molecule of an acid on ionisation."
The acid which undergoes partial or incomplete
(i) Monobasic Acids :
ionisation in aqueous solution are known as weak
The acid on ionisation produce one hydronium ion acids.
in aqueous solution.
Example :
CH3COOH + Water
CH3COO– (aq) + H+ (aq)
Hydrochloric acid (HCl) Hydrobromic acid (HBr) Acetic acid Acetate ion
Example : Sodium hydroxide (NaOH), Zinc oxide All the alkalies are bases but all bases are not
(ZnO), Copper oxide (CuO), Calcium hydroxide alkalies.
[Ca(OH)2], Aluminium hydroxide [Al(OH)3].
Examples : [Fe(OH)3] ferric hydroxide and cupric
The compounds which are either metallic oxides or hydroxide [Cu(OH) 2] are base, but not an alkali.
metallic hydroxides. Which combines with acids to
form salts and water only. CLASSIFICATION OF BASES
CuO + 2HCl CuCl 2 + H2O (I) Classification on the basis of their strength :
Base Acid Salt Water (i) Strong alkalies or bases :
NaOH + HCl NaCl + H2O The alkalies or bases which undergo almost
Base Acid Salt Water complete ionisation in aqueous solution are known
Mg(OH)2 + H2SO 4 MgSO 4 + 2H2O as strong alkalies or bases.
Examples :
Base Acid Salt Water
Complete ionised
Illustration 1 :
–
Classify the following acids and bases in the NaOH(aq.) Na+ (aq) + OH (aq)
categories of weak and strong : Sodium hydroxide
+ –
(i) HNO 3 (ii) H2SO 4 (iii) HClO 4 KOH(aq.) K (aq) + OH (aq)
(iv) KOH (v) CH3COOH (vi) NH4OH Potassium hydroxide
+2 –
Solution : Ba(OH)2 (aq.) Ba (aq) + 2OH (aq)
Weak acids (v), Barium hydroxide
Calcium hydroxide
Solution :
2
Mg OH 2 aq. Mg aq 2OH aq.
HCl + H2O H3O + + Cl – Magnesium hydroxide
or it can also be written as
(II) Classification on the basis of their concentration :
H2 O
HCl + –
H (aq) + Cl (aq) (i) Concentrated Base or Alkali : The bases or
alkalies which contain very small amount of water
Illustration 3.
is called concentrated bases or alkalies.
Which one of these has a higher concentration of
(ii) Dilute Base : The bases or alkali which contain
H+ ions ?
more amount of water is called a dilute bases or alkalies.
1M HCl or 1M CH3COOH
(III) Classification on the basis of their acidity :
Solution : Acidity of a base is determined by the number
1M HCl will have higher concentration of H + ions. o f hyd ro xyl (OH – ) i o ns pro du ced by per
molecule of a Base or Alkali on complete
ALKALIES dissociation in water.
Bases which completely dissolve in water are called "or"
alkalies. The "number of hydrogen ions of an acid with which
Examples : KOH, NaOH, Ca(OH)2 a molecule of that alkali or base react to produce
salt and water is known as acidity of an alkali or 3. CuO + (X) CuSO4 + H2O. Here (X) is
Base".
(A) CuSO4 (B) HCl (C) H2SO4 (D) HNO3
(i) Monoacidic Bases or Alkali :
4. Arrhenius acid gives
The base or alkali on complete ionisation produce
one hydroxyl (OH–) ion in aqueous solution. (A) H+ in water (B) OH– in water
(A) Carbonic acid (H2CO3) Example: Solid –Oxalic acid (COOH)2, Boric acid
(H3BO3)
(B) Sulphurous acid (H2SO3)
Liquid– Acetic acid (CH3COOH), Formic
(C) Formic acid (HCOOH) acid (HCOOH),
(D) Oxalic acid [(COOH)2] Sulphuric acid (H2SO 4)
Volatile liquid– Carbonic acid (H2CO3), solution, respectively. If you are given red litmus
Hydrochloric acid (HCl) paper, how will you identify the contents of each test
Nitric acid (HNO 3) tube ?
(III) Indicator : ACTIVITY : Take small amount of finely chopped
Indicator is a chemical compound which is added onions along with some strips of clean cloth in a
to the solution in very small amount to detect their plastic bag. Tie up the bag tightly and leave it as
acidic or basic nature.” such in a refrigerator for a night. In the morning,
As they show colour change in acidic and basic take two of these strips and check their odour. Now
medium, they are also called acid-base indicators. put a few drops of dilute HCl solution on one strip
In other words, and a few drops of dilute NaOH solution on the
other. Rinse both the cloth strips with water and
An acid-base indicator is that substance which
again check their odour and note down in your note
possesses one colour in acidic medium and a
different colour in alkaline medium.” book. You will see that onion will give different
odour in HCl and NaOH.
Litmus
You can repeat the activity by taking dilute vanilla
– Litmus is a mixture of water soluble dyes extracted
essence. Smell dilute vanilla essence. Now take
from Lichens, especially Roccella tinctoria. It is the
most commonly used indicator to detect acids and some dilute HCl solution in one test tube and dilute
bases. NaOH solution in another test tube add a few drops
– Litmus solution is a purple coloured dye and most of dilute vanilla essence to both the test tubes and
commonly used in the laboratory. shake well. Check the odour once again. You will
feel different smells in both the test tubes.
– In the neutral solution, it has purple colour. In the
acidic solution, it turns red whereas in the basic Lastly, you can repeat the activity by taking clove
solution, it turns blue. oil in place of vanilla essence.
In nutshell: From this activity, we conclude that vanilla, onion
(i) An acid turns blue litmus into red or clove oil can also be used as olfactory indicators
since these change their odour in acidic and basic
(ii) A base or an alkali turns red litmus into blue.
media.
Effect of Indicator :
(IV) Effect on Skin : All strong mineral acids have a
They affect the indicators as given below corrosive action on skin and cause painful burns.
Example : Concentrated sulphuric acid stains the
Indicator Change in acidic medium
skin black.
Blue litmus paper Blue to Red
Concentrated nitric acid & hydrochloric acid stains
Methyl orange Orange to pink the skin yellow.
Phenolphthalein Remains colourless (V) Electrical Conductivity : All mineral acids are good
Turmeric paper Remains colourless conductors of electricity and conduct electricity in
their aqueous solution. On electrolysis, they
Carbonic acid (H2CO3) turns blue litmus to pink.
decompose liberating hydrogen at cathode.
Because this is weak mineral acid.
(2) Chemical Properties of Acids :
Litmus : A water soluble purple dye, extracted from (I) Reaction with metals :
certain lichens, a plant belonging to the division Dilute acids like hydrochloric acid (HCl), sulphuric
thallophyta and is commonly used as an indicator. acid (H2SO4) react with certain active metals to
The pH range for litmus is 4.5 – 8.3 at room evolve hydrogen gas and form their metallic salt.
temperature. Zn(s) + H2SO 4 ZnSO 4 (aq) + H2 (g)
QUESTION : You have been provided with three dilute
test tubes. One of them contains distilled water and 2Na(s) + 2HCl 2NaCl (aq) + H2 (g)
the other two contain an acidic solution and basic dilute
(bicarbonates) react with dilute acids to evolve CO2 Na2CO 3 (s) + 2HCl
2NaCl(aq) + H 2O (l) + CO 2(g)
gas and form salt. Sodium carbonate Sodium chloride
(III) Reaction with metallic oxides : Iron (II) Dilute Iron sulphate
Metal oxides react with dilute acids to form salt and sulphide
water. KHS + HCl KCl (aq) + H 2 S (g)
Activity : To study the reaction of dilute acid with Potassium Dilute Potassium chloride
metal oxides (or basic oxides). Hydrogen
sulphide
Materials required : Copper (II) oxide, Dilute
ZnS + H 2 SO 4 ZnSO 4 (aq) + H 2 S (g)
hydrochloric acid , Test tube
Zinc sulphide Dilute Zinc sulphate
Procedure : Take about 0.5g of copper (II) oxide
(bl ack i n colour) in a test tube.Add dil ute (VI) Reaction with metal chlorides :
hydrochloric acid dropwise with occasional shaking Metal chlorides react with concentrated acids to
till copper (II) oxide dissolves.Note the colour of the produce hydrogen chloride gas. Which give white
solution.Is not it bluish-green ? It is the solution of dense fumes with ammonia.
copper (II) chloride.
Conclusion : Acids react with metal oxides to 2NaCl (s) + conc. H 2 SO 4 Na2 SO4 (aq)+2HCl(g)
give the corresponding salt & water. Sodium Sodium
chloride sulphate
Na2O (s) + 2HNO 32NaNO 3(aq) + H2O (l)
Sodium Dilute Sodium 2KCl (s) + conc. H 2 SO 4 K2 SO4 (aq) + 2HCl(g)
oxide Nitrate Potassium Potassium
chloride sulphate
CuO (s) + 2HCl CuCl 2(aq) + H2O (l)
(VII) Reaction with metal nitrates :
Copper Dilute Copper
(II) oxide (II) chloride Metal nitrates react with concentrated acids to
produce more volatile nitric acid.
PbO (s) + 2HNO 3Pb(NO 3)2(aq) + H2O (l)
Lead Dilute Lead
2NaNO 3(s)+ conc. H2SO 4
Na2SO4 (aq)+ 2HNO 3
(II) oxide (II) Nitrate
Sodium Sodium
FeO (s) + 2HCl FeCl2(aq) + H2O (l) nitrate sulphate
Iron (II) oxide Dilute Iron (II) chloride (VIII) Reaction of Acid and Base with each other :
All metallic hydroxides (Bases) react with acids to
(IV) Reaction with metallic sulphites and hydrogen
sulphites : form their metallic salt and water. This reaction is
also known as acid-base neutralisation reaction.
Metallic sulphites and hydrogen sulphites react with
dilute acids to liberate sulphur dioxide. Activity : To study a reaction of an acid say,
hydrochloric acid with an alkali or base.
CaSO 3 (s) + H 2 SO 4 CaSO 4 (aq)+H 2 O()+SO 2 (g)
Materials required : Hydrochloric acid solution,
Calcium Dilute
sulphite sodium hydroxide solution, phenolpht halein
indicator, Boiling tube, dropper, trough.
NaHSO 3 (s) + HCl NaCl(aq)+H 2 O ()+SO 2 (g)
Procedure : Take about 5 mL of dilute solution of
Sodium Dilute
hydrogen
sodium hydroxide (NaOH) in a test tube. Add 2
sulphite drops of phenolphthalein indicator in it. The solution
(V) Reaction with metallic sulphides and hydrogen in the test tube turns pink. Now,add dilute solution
sulphides : of hydrochloric acid (HCl) when the pink colour of
the solution just disappears.
Now, add a drop of sodium hydroxide solution and Methyl orange Orange to yellow
shake the test tube to mix the solution. What do Phenolphthalein Colourless to pink
you see? The solution turns pink. Add a drop of HCl Turmeric paper Yellow to red brown
to the solution in the test tube. The pink colour
(4) Chemical Properties of Bases :
disappears. Keep repeating the addition of sodium
hydroxide and hydrochloric acid solution one after (I) Reaction with Metals :
the other and wat ch t he appearance and Bases react with some metals to liberate hydrogen
disappearance of pink colour. gas.
Conclusion : This experiment shows that the Zn (s) + 2NaOH Na2ZnO 2 (aq) + H2 (g)
addition of HCl solution destroys the alkaline nature Zinc Dilute Sodium Hydrogen
of NaOH.On the other hand,the addition of NaOH zincate gas
solution destroys the acidic nature of HCl.That is,
both NaOH and HCl appear to cancel the effect of 2Al (s)+ 2NaOH+2H2O () 2NaAlO 2+3H2 (g)
each other. Such a reaction between an acid and Dilute Dilute Sodium Hydrogen
alkali is called neutralisation. aluminate gas
(II) Reaction of Bases with Non-metallic oxide :
Illustration 5 :
Base react with non-metallic oxide to form their
W hat is a neutralisation reaction ? Give two
respective carbonates and water.
examples.
2NaOH (aq) + CO 2 (g) Na2 CO 3 (aq)+ H 2 O ()
Solution :
Sodium Carbon Sodium water
KOH (aq) + HCl KCl (aq) + H 2 O ()
hydroxide dioxide carbonate
Potassium Dilute Potassium
hydroxide chloride 2KOH (aq) + CO 2 (g) K 2 CO 3 (aq)+ H 2 O ()
Potassium Carbon Potassium water
NaOH (aq) + HCl NaCl (aq) + H 2 O ()
hydroxide dioxide carbonate
Sodium Dilute Sodium
hydroxide chloride Some of the alkalis like sodium hydroxide (NaOH)
are called deliquescence because they absorb
Ca(OH)2 (aq) + 2HNO 3 Ca(NO 3 )2 (aq)+2H 2 O ()
carbon dioxide from the air and its strength
Calcium Dilute Calcium
hydroxide nitrate decreases with time.
Mg(OH)2 (s) + H 2 SO 4 MgSO 4 (aq) + 2H2O () (III) Reaction of Bases with Acids :
Magnesium Dilute Magnesium
They neutralise the acids to form salt and water.
hydroxide sulphate
(I) Taste : They are sharp bitter in taste. NaOH (aq) + NH 4 Cl(g) NaCl (aq)+H 2 O ()+NH 3 (g)
(II) Effect on skin : They give a feeling of soapy touch Sodium Sodium
and all alkali have a mild corrosive action on skin. hydroxide chloride
(III) Effect on Indicator : They effect the indicators as Ca(OH)2 (aq) + 2NH4Cl(g) CaCl2 (aq) + 2H2O () +NH3 (g)
given below : Calcium Calcium
Indicator Change in acidic medium hydroxide chloride
(V) Reaction of Bases with Salt : 3. Iron filings were added to solution of copper
Bases react with salt solution to form another base sulphate. After 10 minutes, it was observed that the
and another salt. blue colour of the solution changed and layer got
deposited on iron filings. The colour of the solution
3NaOH (aq) + FeCl3 (aq) Fe(OH)3 (aq) +3NaCl(aq)
and that of the layer would respectively be
Sodium Iron (III) Iron (III)
(A) yellow and green
hydroxide chloride hydroxide
(B) brown and blue
Base–1 Salt–1 Base–2(Brown ppt.) Salt–2
(C) red and greenish blue
2NaOH (aq) + ZnSO 4 (aq) Zn(OH)2 (s) +Na2 SO 4 (aq)
(D) green and reddish brown
Sodium Zinc sulphate Zinc Sodium
4. Which of the following compounds is neutral to
hydroxide hydroxide sulphate
litmus?
(W hite ppt.)
(A) NaNO3 (B) CuSO4.5H2O
Comparison Between Properties of ACIDS & BASES
Acids Bases (C) NaHCO3 (D) Ca(OH)2
(i) Sour in taste. (i) Bitter in taste.
5. W hen dil ute hydrochlori c aci d is added to
(ii) The properties are due to (ii) The properties are due to
the presence of the presence of granulated zinc placed in a test tube, the
hydrogen ion (H+ ) in hydroxide ion (OH– ) in observation made is that
water solution of an water solution of a base.
(A) the surface of the metal turns shining
acid.
(iii) Turns blue litmus to red. (iii) Turns red litmus to blue. (B) the reaction mixture turns milky
(iv) Aqueous solution (iv) Aqueous solution
conducts electricity. conducts electricity.
(C) odour of chlorine is observed
(v) Reacts with active metals (v) Does not react with (D) a colourless and odourless gas is evolved with
like Na, K, Ca and Zn to metals except with Zn, Al bubbles.
give hy drogen gas. and Sn.
(vi) Acidic properties (vi) Basic properties 6. Acetic acid was added to a solid X kept in a test
disappear when react disappears when react tube. A colourless and odourless gas was evolved.
with bases with acids The gas was passed through lime water which
(Neutralization). (Neutralization).
turned milky. It was concluded that
(vii) Reacts with carbonates (vii) Absorbs carbon dioxide to
to give carbon dioxide. f orm carbonate. (A) solid X is sodium hydroxide and the gas
(viii) Frequently corrosive to (viii) Frequently corrosive to evolved is CO2
skin skin and slippery in
(B) solid X is sodium bicarbonate and the gas
nature.
evolved is CO2
(ix) The pH value is less than (ix) The pH value is greater
7 at 25°C. than 7 at 25°C. (C) solid X is sodium acetate and the gas evolved
is CO2
Daily Practice Problem-2 (D) solid X is sodium chloride and the gas evolved
1. Phenolphthalein is is CO2.
(A) yellow in acidic medium, pink in basic medium 7. A blues litmus paper was first dipped in dil. HCl and
(B) pink in acidic medium, colourless in basic then in dil. NaOH solution. It was observed that the
medium colour of the litmus paper
(C) colourless in acidic medium, pink in basic
(A) changed to red
medium
(D) pink in acidic medium, yellow in basic medium (B) changed first to red and then to blue
2. Moist sodium bicarbonate was placed on a strip of (C) changed blue to colourless
pH paper. The colour of the strip
(A) turned blue (B) did not change (D) remained blue in both the solutions.
(C) turned green (D) turned light pink
8. W hich of the following metals can displace Connect the electrodes to a battery bulb through a
hydrogen from the aqueous solution of sodium key and a dry cell. Pour dilute hydrochloric acid into
hydroxide? the beaker and press the key. Did the bulb glow?
Perform similar experiment with all the given
(A) Mg (B) Cu (C) Al (D) Ag
solutions, and record your observation.
9. When two molecules of NaOH react with one
Observation :
molecule of sulphuric acid, one molecule of
Solution Bulb Bulb does Nature of
.....................and .....................molecules of water
glows not glow solution
are formed. Dil. Hydrochlori c × Conducting
acid
(A) sodium sulphate, 2 (B) sodium sulphite, 2 Dil.Sulphuric acid × Conducting
(C) sodium sulphate, 1 (D) sodium sulphate, 1 Dil.Sodium × Conducting
hydroxide
10. Mark the correct statement. Ethanol × Non-Conducting
(A) Both bases and alkalies are soluble in water. Glucose soluti on × Non-Conducting
(B) Alkalies are soluble in water but all bases are Conclusion : The solutions of acids and bases are
not. good conductors of electricity. The solution of
(C) C2H5OH is a base because it has OH group. glucose and ethanol are nonconductor of electricity.
(D) Bases are soluble in water but alkalies are not. A common thing for all the bases (or ) is that they
all produce hydroxide ions (OH–) when dissolved in
What do All Acids and Bases have in Common ?
water.
A common thing for all the acids is that they
For Example : NaOH, Mg(OH) 2, Ca(OH) 2 and
produce hydrogen ions [H+ (aq.)] when dissolved in
NH4OH are all bases because they dissolve in
water.
water to produce hydroxide ion (OH–)
For Example : Acids like HCl, H 2SO 4 , HNO 3 ,
CH3COOH etc. show acidic character because they ACIDS OR BASES (ALKALI) IN WATER
dissociate in aqueous solution to produce hydrogen SOLUTION
ions.
The acidic behaviour of acids is due to the
But all the compounds containing hydrogen are not
presence of hydrogen ions,H+(aq) ions,in them.The
acids such as glucose (C 6H 12O 6) and alcohol
acids produce hydrogen ions only in the presence
(C2H5OH) also contain hydrogen but they do not
of water. So, in the absence of water, a substance
show acidic character.
will not form hydrogen ions and hence will not show
Activity : To find the characteristics common
its acidic behaviour.
between acids and bases.
Activity : To show that acids furnish H+ (aq) ions
Materials required : Dilute hydrochloric acid,
only in the presence of water.
Dilute sulphuric acid, Dilute solution of sodium
hydroxide, Ethanol, Glucose solution & Beaker, Materials required : Common salt, Conc.
Carbon electrodes , Dry cells, bulb 1.5 V, Key. sulphuric acid, anhydrous calcium chloride, blue
Procedure : Take a beaker and place two carbon litmus paper, boiling tube, delivery tube packed with
electrodes into it. anhydrous calcium chloride.
Procedure : Take 0.5g of dry common salt in a
dry boiling tube. Add a few drops of concentrated
sulphuric acid over common salt in the boiling tube.
What do you see ? A colourless, irritating gas is
evolved. Fit a cork carrying a calcium chloride
Acid solution in water packed delivery tube into the mouth of the boiling
conducts electricity tube.
Bring a dry blue litmus paper near the opening of If we find quantitatively, the amount of H+(aq) / OH–
the calcium chloride tube. Observe, if there is any (aq) ions present in a solution, we can judge how
change in colour. Colour of the litmus paper strong an acid or a base is ?
remains unchanged. Now, bring a moistened blue We can do this by the help of a universal indicator,
litmus paper near the mouth of the calcium chloride which is a mixture of several indicators. The
tube. Do you observe any change in the colour of universal indicator shows different colours at
litmus paper ? Yes, blue litmus has changed to red. different concentration of hydrogen ions or pH
values in solution.
pH SCALE :
S.P.L. sorenson, a Danish Chemist in 1909
int roduced t he concept of m easuring the
concentration of hydrogen ions [H + (aq)] in a
particular solution., The p in pH stands for 'potenz'
in German, meaning power. On the pH scale we
Preparation of HCl gas
can measure pH from "0" (very acidic) to 14 (very
From the above activity, following conclusion can be alkaline).
drawn –-
Conclusion : Dry HCl gas on coming in contact
with dry blue litmus
paper does not produce H+ ions, and hence the
colour of litmus paper does not change. So,we can
say that separation of H+ ions from acid takes place
only in the presence of water.
Variation of pH with the change in concentration of
Important Point : Why should water be never H+(aq) and OH (aq) ions
added to dilution of an Acid ?
The concentration of H+ (aq) and OH– (aq) ions in
Ans. Mixing of water in acid is an exothermic pure water is 1 × 10–7 mol litre–1. This means that
process and more heat is produced with splashing all aqueous solutions contain both H+(aq) and OH–
of water. In order to avoid this, we must add acid (aq) ions. The product of concentration of H+(aq)
into water and not water into acid. and OH–(aq) in water is constant (equal to 1 × 10–
14 mol 2 litre–2 at 25°C) and is known as ionic
Moreover, acid must also be added to water in if H+(aq) > OH– (aq)
small lots and not in one instalment.
(H+ (aq) > 1 × 10–7 mol litre–1), then the solution
should be acidic
HOW STRONG ARE ACID OR BASE
SOLUTION and if H+(aq) < OH–(aq) or
Acids and bases on dilution with water, decreases H+(aq) < 1 × 10–7 mol litre–1, then the solution
the concentration of H+(aq) or OH–(aq) ions in the should be basic or alkaline.
acidic and basic solutions respectively.
pH OF SALT : Activity
Collect the following salt samples - sodium chloride, potassium nitrate , aluminium chloride, zinc sulphate,
copper sulphate, sodium acetate, sodium carbonate and sodium hydrogencarbonate.
Check their solubility in water.
Check the action of these solutions on litmus and find the pH using a pH paper.
Which of the salts are acidic, basic or neutral ?
Identify the acid or base used to form the salt.
Chlor-alkali process for obtaining sodium 4. Mixed salts contains two distinct cations or anion.
hydroxide – When we pass electricity through a Example - CaOCl2.
solution of sodium chloride, commonly called brine.
5. Double salts are stoichiometric combination of two
It decomposes to form sodium hydroxide according
simple salts Example K2SO4.Cr2(SO4)3.24H2O.
to the following equation–
Illustration 9 :
2NaCl(aq) + 2H2O(l) 2NaOH(aq) + Cl2(g) + H2(g)
What is the neutralisation reaction ? Give two
On electrolysis, chlorine gas is formed at anode and
examples.
hydrogen at cathode.Sodium hydroxide solution is
formed near the cathode. All these products are Solution :
commercially important. The process of production When an acid reacts with a base to form salt and
of sodium hydroxide from sodium chloride is known water, it is called neutralisation reaction. Two
as chlor-alkali process because of products formed examples are
– chlor for chlorine and alkali for sodium hydroxide.
(i) The reaction between hydrochloric acid and sodium
Pure salt hydroxide and (ii) the reaction between sodium
carbonate and sulphuric acid.
HCl + NaOH NaCl + H2O
CHLORINE
Produced
Produced produced during the electrolysis of aqueous sodium
NaOH
at at
cathode anode chloride (brine). This chlorine gas is used for the
manufacture of bleaching powder. Bleaching powder
is produced by the action of chlorine on dry slaked
Uses
Uses Uses
(As fuels, for
(In water treatment,
(in decreasing metals, in lime [Ca(OH)2]. Bleaching powder is represented as
swimming pools,
manufacturing the manufacture of soap
ammonia
and manufacturing
and detergents, paper making CaOCl 2, though the actual composition is quite
PVC, disinfectants,
for fertilisers) and artificial fibres)
CFCs, pesticides) complex.
Ca(OH)2 + Cl 2 CaOCl 2 + H2O
Hydrogen and Chlorine Chlorine and Sodium
Combine to give
Hydrochloric acid
hydroxide combine
to give Bleach
Slaked lime Bleaching powder
Uses of bleaching powder
Uses Uses
(In cleaning steel, in (In household bleaches,
the preparation and bleaching fabric) (a) For bleaching cotton and linen in the textile industry,
of ammonium chloride,
medicines) for bleaching wood pulp in paper factories and for
Illustration 8 : bleaching washed clothes in laundry.
What are the types of salts on the basis of nature (b) As an oxidising agent in many chemical industries,
of acid and base combined. and
Solution : (c) For disinfecting drinking water to make it free of
Salts may be of following types on the basis of germs.
nature of acid base combined. (iii) Baking soda : (NaHCO 3)
1. Acid Salts contains replaceable hydrogen, Example- The chemical name of baking soda is sodium
NaHSO4 . hydrogencarbonate or sodium bicarbonate. Baking
soda (or sodium bicarbonate) is represented by the
2. Basic salts contains replaceable hydroxyl group, formula NaHCO 3. The soda commonly used in the
Example = Pb(OH)NO3. kitchen for making tasty crispy pakoras is baking
3. Normal salts does not contain replaceable hydrogen soda. Sometime it is added for faster cooking. It is
or hydroxyl ion, Example NaCl. produced using sodium chloride as one of the raw
materials.
The chem ical f orm ula of washing soda is The salt containing water of crystallisation are called
Na2CO3·10H2O, (sodium carbonate decahydrate). hydrated salts.
Anhydrous sodium carbonate (Na2CO3) is generally Activity : To show that water of crystallisation can
called soda ash. Washing soda is manufactured by be removed by heating.
Solvay process. This process is also known as
Ammonia soda process. The raw material needed
for the process are sodium chloride, lime stone
(CaCO 3 ) and ammonia (NH 3 ). The reactions
involved are.
Step-I
Observe vapours being condensed in test tube. When mixed with a limited amount of water (50%
by mass), if forms a plastic mass, evolves heat and
Cool the crystals and add few drops of water into it.
quickly sets to a hard porous mass with in minutes.
Observation : Water vapours get condensed in a This is called the setting process.
test tube and colour of blue crystals changes into
During setting, a slight expansion in volume occurs.
white. On adding water to anhydrous copper
It is due to this that it fills the mould completely
sulphate it changes into blue again.
and gives sharp impression. The reaction during
Heat
CuSO 4·5H2O CuSO 4+ 5H2O process is
Blue vitriol W hite CaSO 4 .0.5H2O(s) + 1.5 H2O() CaSO4 . 2H2O(s)
Plaster of paris Water Gypsum (Hard mass)
Conclusion : Crystalline substances have water of
crystallization which is lost on heating. Uses of Plaster of Paris :
Water of crystallization – It is fixed number of Plaster of paris is used in making casts and
water molecules present in crystalline salt, eg., patterns for moulds and statue.
Blue vitriol CuSO 4 + 5H 2 O Green vitriol FeSO 4 +7H 2 O Plaster of paris is used as cement in ornamental
casting and for making decorative materials.
Glauber's salt Na2 SO 4 +10H 2 OW hite vitriol ZnSO 4 + 7H 2 O
Gypsum CaSO 4 + 2H 2 O Epsom salt MgSO 4 +7H 2 O Plaster of paris is used as a fire proofing material
and for making chalks.
Plaster of Paris : (CaSO4 1/2 H2O)
Plaster of pairs is used in hospitals for immobilising
Plaster of paris is hemihydrate (hemi means half
the affected part in case of bone fracture or strain.
and hydrate means water) of calcium sulphate. Its
molecular formula is CaSO4.1/2H2O or(CaSO4)2 .H2O Plaster of paris (POP) is used to fill small gaps on
walls & roofs.
In plaster of paris one molecule of water is shared
by two CaSO4 Illustration 10 :
As a base :
— Acid base reactions always proceed in the direction
HCl(aq) H2O(l)
H3O (aq) Cl (aq) from the stronger to weaker acid-base combination.
acid base For example,
As an acid : Water
H2SO4 NH3
NH4 HSO4
H2 O(I) NH3(aq)
NH4(aq) OH (aq)
stronger acid stronger base weaker acid weaker base
acid base
Lewis Concept of Acids and Bases
According to Lewis concept, an acid is a substance
Similarly, bicarbonate ion (HCO3–) behaves as an which can accept a pair of electrons, whereas a
acid and a base as : base is a substance which can donate a pair of
electrons i.e., acids are electron acceptors and
HCO3 aq NH3(aq) 2
NH4(aq) CO3 (aq) bases are electron donors.
acid base Chemical Species which can act as Lewis Acid
— Electron deficient neutral compounds i.e. molecules
HCl(aq) HCO3(aq)
H2CO3(aq) Cl (aq) in which central atom has incomplete octet,
acid base e.g., BF3, FeCl3, AlCl3, etc.
— All simple cations, e.g., H+, Mg2+, Ag+, Fe3+, etc.
All Arrhenius acids are also Bronsted acids but
— Molecules having a multiple bond between atoms
Arrhenius bases are not Bronsted bases.
of different electronegativities, e.g., SO3, CO2, etc.
CONJUGATE ACID-BASE PAIR — In coordinate complexes, metal atoms act as Lewis
In case of acid-base reaction, the reverse reaction is acid e.g., in Ni (CO)4, Ni acts as Lewis acid.
also an acid-base reaction. Every acid forms a — Molecules having a central atom with empty d-
conjugate base by the loss of a proton while every base orbitals, e.g., SiF4, SnCl4.
forms a conjugate acid by the gain of a proton (H+).
ILLUSTRATIONS Illustration 11 :
Find the Basicity of the following acids
Illustration 8 :
HCl, HNO 3, H2SO 4, H3PO 4, H3PO 3, H3PO 2
(i) Identify strong and weak acid from the following
Solution :
HCl, H2SO4 CH3 COOH, HCOOH, HNO3, C6H5COOH
HCl 1 H3PO 4 3
(ii) What do all Acids have in Common?
Solution : HNO 3 1 H3PO 3 2
(i) Strong Acid Weak Acid H2SO 4 2 H3PO 2 1
HCl C6H5COOH Illustration 12 :
HNO3, H2SO4 CH3COOH, HCOOH (i) The [H+] of an acid solution be 10-3 M. what is its
(ii) An acid is a substance which dissociates (or pH ?
ionizes) on dissolving in water to produce hydrogen
(ii) Find the pH of the given solution
ions [H+(aq) ions].
(iii) An aqueous solution has hydrogen ion concent-
For example, an aqueous solution of hydrochloric
ration [H+] = 1.0 × 10–7mol L–1. Calculate its pH
acid dissociates (or ionizes) to form hydrogen ions
value.
(along with chloride ions):
HCl (aq)
H (aq) Cl (aq) (iv) (a) The pH of NaOH solution is 10. What is the
Hydrochloric acid Hydrogen ion Chloride ion concentration of NaOH?
It is the presence of hydrogen ions [H+(aq) ions]
in hydrochloric acid solution which makes it behave (b) What is molar concentration of Ca(OH)2 if its
solution has pH 12?
like an acid.
Solution :
Illustration 9:
(i) What do you mean by active metals? (i) pH = – log [H+]= – log [10-3] = (–) (–3) log 10 = 3.
(ii) What is Antacid? (Please remember that log 10 = 1).
Solution : (ii) For neutral solution: pH = 7, and [H+] = 10–7
(i) Metals which can displace hydrogen from dilute For acidic solution: pH < 7 and [H+] > 10–7
acids are known as active metals
For basic solution: pH > 7 and [H+] < 10–7
e.g. Na, K, Zn, Fe, Ca, Mg etc.
Note : Just as the [H + ] of a solution can be
2Na(s) + 2HCl (dilute) 2NaCl(aq) + H2 (g)
expressed in terms of pH value, the [OH–] can be
(ii) Antacid is called as ‘Milk of Magnesia’ which
expressed as pOH.
is used to remove indigestion (caused by too
much hydrochloric acid in the stomach) is a Mathematically, pOH = – log [OH–] Moreover, [H+]
metal hydroxide called ‘magnesiumhydroxide’. [OH–] = 10–14 and pH + pOH = 14
Magnesium hydroxide is basic in nature. It Thus, if pH value of solution is known, its pOH
reacts with the excess hydrochloric acid value can be calculated.
present in the stomach and neutralizes it. (iii) [H+]=10–7molL–1 =10–7M
Illustration 10 : pH = – log [H+] = –log [10–7] = (–) (–7) log 10 = 7.
(i) Is it true that non–metal oxides are acidic in
nature? (iv) (a) [H+] = 10–pH ;[OH–] = 10 pOH
(ii) What do you mean by alkali? NaOH is strong base, hence [OH–] = [NaOH]
Solution :
(i) Yes, because generally the reaction of non–metals In pH = 10, pOH = 4
oxides with bases form salts and water so it shows [OH–] = 10–4 = [NaOH]
that non–metal oxides are acidic in nature. (b) pH of Ca(OH)2 = 12
(ii) A base which is soluble in water is called an alkali.
pOH = 2
Some of the common water soluble bases (or
alkalis) are : Sodium hydroxide (NaOH), Potassium [OH–] = 10–2 M
hydroxide (KOH), Calcium hydroxide [Ca(OH)2]. [Ca(OH)2] = M = 0.5 × 10–2 M
NCERT SECTION
PRACTICE CORNER
1. You have been provided with three test tubes. One 10. How is the concentration of hydroxide ions (OH–)
of them contains distilled water and the other two affected when excess base is dissolved in a
contain an acidic solution and a basic solution, solution of sodium hydroxide?
respectively. If you are given only red litmus paper, 11. You have two solutions, A and B. The pH of solution
how will you identify the contents of each test A is 6 and pH of solution B is 8. Which solution
tubes? has more hydrogen ion concentration? Which of this
2. Why should curd and sour substances not be kept is acidic and which one is basic?
in brass and copper vessels? 12. What effect does the concentration of H+(aq) ions
3. Which gas is usually liberated when an acid reacts have on the nature of the solution?
with a metal? Illustrate with an example. How will 13. Do basic solutions also have H+(aq) ions? If yes,
you test for the presence of this gas? then why are these basic?
4. A metal compound A reacts with dilute hydrochloric 14. Under what soil condition do you think a farmer
acid to produce effervescence. The gas evolved would treat the soil of his fields with quick lime
extinguishes a burning candle. Write a balanced (calcium oxide) or slaked lime (calcium hydroxide)
chemical equation for the reaction if one of the or chalk (calcium carbonate) ?
compounds formed is calcium chloride. 15. W hat is the common name of the compound
5. Why do HCl, HNO3, etc. show acidic characters in CaOCl2?
aqueous solutions while solutions of compounds like
16. Name the substance which on treatment with
alcohol and glucose do not show acidic character? chlorine yields bleaching powder.
6. Why does an aqueous solution of acid conduct
17. Name the sodium compound which is used for
electricity? softening hard water.
7. Why does dry HCl gas not change the colour of the 18. What will happen if a solution of sodium hydrogen
dry litmus paper? carbonate is heated? Give the equation of the
8. While diluting an acid, why is it recommended that reaction involved.
the acid should be added to water and not water 19. Write an equation to show the reaction between
to the acid?
plaster of Paris and water.
9. How is the concentration of hydronium ions (H3O+)
20. A solution turns red litmus blue, its pH is likely to
affected when a solution of an acid is diluted? be
(a) 1 (b) 4 (c) 5 (d) 10
CORNER
8. Acetic acid is a weak acid because
EXERCISE -1 (A) its aqueous solution is acidic
(BASED ON JEE MAIN/NEET) (B) it is highly ionized
(C) it is weakly ionized
1. Which one of the following will turn red litmus blue?
(D) it contains – COOH group
(A) Vinegar (B) Baking soda solution
9. Partial neutralization of a polybasic acid gives
(C) Lemon juice (D) Soft drinks
(A) acid salt (B) basic salt
2. Which one of the following will turn blue litmus red?
(C) normal salt (D) double salt
(A) Vinegar
10. Which of the following can form more than one acid
(B) Lime water salt?
(C) Baking soda solution (A) CH3COOH (B) H3PO4
(D) Washing soda solution (C) CH3CH2COOH (D) ZnO
3. W hen zinc reacts with sodium hydroxide, the 11. A solution turns blue litmus red. The pH of the
products formed are solution is probably
17. Plaster of Paris is obtained 6. Which of the following gas(s) is (are) acidic?
(A) by adding water to calcium sulphate
(A) CO2 (B) SO2 (C) SO3 (D) CO
(B) by adding sulphuric acid to calcium hydroxide
(C) by heating gypsum to a very high temperature 7. Which of the following is (are) not acidic in nature?
(D) by heating gypsum to 120°C (A) Lime juice (B) Human blood
18. Which of the following is ‘quick lime’?
(C) Lime water (D) Antacid
(A) CaO (B) Ca(OH)2
(C) CaCO3 (D) CaCl2.6H2O 8. Which of the following statements is correct about
19. Which of these choices is considered to be a an aqueous solution of an acid and of a base?
Bronsted-Lowry base? (A) Higher the pH, stronger the acid
(A) Proton donor (B) Proton acceptor
(B) Higher than pH, weaker the acid
(C) Electron acceptor (D) None of these
20. In the reaction, CO32– + H2O HCO3–+ OH– water (C) Lower the pH, stronger the base
is a
(D) Lower the pH, weaker the base
(A) Bronsted acid (B) Bronsted base
9. Which among the following is(are) base(s)?
(C) conjugate acid (D) conjugate base
(A) NaOH (B) KOH (C) NH4OH (D) C2H5OH
EXERCISE -2
10. Sodium hydrogencarbonate when added to acetic
(BASED ON JEE ADVANCED/AIIMS) acid ev olv es a gas. W hich of the f ollowing
statements are true about the gas evolved?
1. Which of the following is (are) strong acid(s).
(A) It turns lime water milky
(A) H2SO4 (B) CH3COOH
(C) HNO3 (D) HCl (B) It extinguishes a burning splinter
2. The salts which will give basic solution on dissolving (C) It dissolves in a solution of sodium hydroxide
in water are : (D) It has a pungent odour
(A) KCl (B) NH4Cl
11. Which of the following is/are mineral acid(s)?
(C) Na2CO3 (D) CH3COONa
(A) Hydrochloric acid (B) Citric acid
3. The salts whose aqueous solution will have a pH
of more than 7 will be : (C) Sulphuric acid (D) Nitric acid
(A) K2CO3 (B) NaHCO3 (C) NaCl (D) NH4Cl
12. Which of the following is(are) true when HCl(g) is
4. The salts whose aqueous solution will affect litmus passed through water?
paper are :
(A) It does not ionise in the solution as it is a
(A) potassium sulphate (B) sodium carbonate
covalent compound
(C) ammonium sulphate (D) sodium acetate
(B) It ionises in the solution
5. What happens when a solution of an acid is mixed
with a solution of a base in a test tube? (C) It gives both hydrogen and hydroxyl ion in the
(A) The temperature of the solution increases solution
(B) The temperature of the solution decreases (D) It forms hydronium ion in the solution due to
(C) The temperature of the solution remains the the combination of hydrogen ion with water
same molecule
1. Column-I Column-II
(A) HCl (p) Strong, acid
(B) HCN (q) Weak acid
(C) NaOH (r) Weak base
(D) NH4OH (s) Strong base
2. Column-I Column-II
(A) KNO3 (p) Nitric acid, silver hydroxide
(B) AgNO3 (q) Hydrochloric acid, Magnesium hydroxide
(C) MgCl2 (r) Carbonic acid, Ammonium
(D) (NH4)2CO3 (s) Nitric acid, Potassium hydroxide
3. Column-I Column-II
(A) Acid-base indicator (p) Na2SO4
(B) Acid used in soft drinks (q) Phenolphthalein
(C) Salt formed by neutralisation (r) Carbonic acid
of strong acid and weak base
(D) Salt whose aqueous solution (s) CuSO4
is neutral
4. Column-I Column-II
Solution pH
(A) Vinegar (p) 6.8
(B) Milk (q) 7.4
(C) Human blood (r) 2.4 - 3.4
(D) Lime water (s) 10.5
5. Column-I Column-II
Anhydrous salt Water of crystallisation
(A) CaSO4 (p) 5H2O
(B) CuSO4 (q) 10H2O
(C) FeSO4 (r) 2H2O
(D) Na2SO4 (s) 7H2O
6. Column-I Column-II
(A) Baking soda (p) NaCl
(B) Washing soda (q) NaOH
(C) Caustic soda (r) Na2CO3
(D) Common salt (s) NaHCO3
7. Column-I Column-II
(A) Simple buffer (p) CH3COONa + CH3COOH
(B) Acidic buffer (q) NH4OH + NH4Cl
(C) Basic buffer (r) CH3COONH4
(D) Basic solution (s) CH3COONa
8. Column-I Column-II
(A) Mono basic (p) KOH
(B) Dibasic (q) Ca(OH)2
(C) Diacidic (r) H2SO4
(D) Monoacidic (s) HNO3
9. Column-I Column-II
Salt solution pH
(A) Na2SO4 (p) < 7
(B) NH4Cl (q) 7
(C) Na2CO3 (r) = 7
(D) CH3COONH4 (s) > 7
10. Column-I Column-II
(A) Metal + acid (p) Water
(B) Acid + base (q) Hydronium ion
(C) Metal carbonate + acid (r) Hydrogen gas
(D) Acid + water (s) Carbon dioxide
5. Assertion : A solution of pH = 1 has hydrogen ion 4. The pH of 10–5 M NaOH solution is.
concentration 3 times than that of 5. A solution has pH = 2
solution of pH=3. It is diluted 10 times what is the pH of the solution
after dilution.
1
Reason : pH = log PASSAGE COMPREHENSION
[H3O ]
6. Assertion : Strength of the acid or the base PASSAGE 1 : The following reactions are occurring
increases with dilution. in a process used for manufacture of sodium
Reason : Ionisati on of an acid or a base carbonate.
increases with dilution. Heat
(A) B CO 2
7. Assertion : W hen rain is accompanied by a
thunderstorm, the collected rain water
(B) + H2O C
will have pH value slightly lower than
that of rain water without (C) + NH4Cl (D) (a gas which is soluble in water)
thunderstorm. (D) + H2O (E) solution
Reason : Tem perature increases due to (E) + CO2 (F)
thunderstorm and so [H+] increases. (F) + NaCl (G) + (H)
8. Assertion : Acetic acid does not act as an acid in Heat
benzene solution. (G) Na2CO3 CO2 H2O
Reason : Benzene does not accept proton. Answer the following questions :
9. Assertion : H 3 PO 4 and H 2SO 4 are known as 1. The name of the process is
polybasic acids. (A) Solvay (B) Salt cake
Reason : They have two or more than two (C) Haber (D) Chlor-alkali
protons per molecule of the acid. 2. (A) is
(A) Ca(HCO3)2 (B) NaHCO3
INTEGER ANSWER TYPE : (C) CaCO3 (D) Ca(OH)2
This section contain 5 questions. The answer to 3. (C) is
each of the questions is a single digit integer, (A) Ca(OH)2 (B) NaOH
ranging from 0 to 9. (C) CaO (D) CaCO3
If the correct answers to questions numbers X,Y, Z 4. (E) is
and W (say) are 6, 0, 9 and 2 respectively, then the (A) NaOH (B) NaCl (C) NH4OH (D) NH4Cl
correct darkening of bubbles will look like the 5. (F) is
following. (A) NH4HCO3 (B) Na2CO3
(C) NaHCO3 (D) (NH4)2CO3
X Y Z W 6. (G) is
0 0 0 0 (A) NaCl (B) NH4Cl
1 1 1 1 (C) NH4OH (D) NaHCO3
2 2 2 2
3 3 3 3
PASSAGE 2 : A solid compounds X on heating
4 4 4 4 gives CO 2 gas and a solid residue. The residue
5 5 5 5 mixed with water forms Y. On passing an excess of
6 6 6 6
7 7 7 7 CO 2 through Y in water a clear solution Z is
8 8 8 8 obtained.
9 9 9 9
1. Identify the compound X.
(A) CaCO3 (B) Na2CO3
1. Calculate the pH of 10–5 KOH solution (C) CaO (D) Ca(OH)2
2. Equal volumes of solutions with pH = 4 and pH = 2. Identify the compound Y.
10 are mixed. The pH of the resulting solution is. (A) CaCl2 (B) CaO (C) Ca(OH)2 (D) CO2
3. A solution of HCl has pH = 5. If one mL of it is
3. Identify the compound Z.
diluted to 1 litre. The pH of resulting solution will
(A) Ca(HCO3)2 (B) Ca(OH)2
be.
(C) CaCO3 (D) CaO
Important Notes