WEST QURNA 1

Vendor Document Cover Sheet

INSTRUCTION: Vendor to complete shaded areas

Vendor Name: Khudairi Trading and Contracting DMCC

Wood Group Project No.: PSN14, PSN48 & PSN96

Wood Group Project Title: EFFLUENT WATER DISPOSAL WELL

Purchase Order No.: PO 4510056456

Package Description: DS6, DS7 & DS8 Effluent Water Injection Pump

Document Title: Mechanical Seal Drawing

Tag or Stockcode No.: IQD6-PAT684002, IQD7-PAT684002, IQD8-PAT684002

Vendors Revision
Vendors own Document Number Vendors Approval Signature
Revision Date
D3994-KTC-DMS-001 50 28.12.2020

Document Review Code:

REVIEWED WITH NO COMMENTS

✔ A
Document is acceptable. Work associated with the document may proceed. Include within final dossier as required.

REVIEWED WITH MINOR COMMENTS

B
Revise & resubmit. Work associated with the document may proceed subject to incorporation of changes indicated.

REVIEWED WITH MAJOR COMMENTS

C
Revise & resubmit. Work can not proceed until the document is returned with review code A or B as defined above.

INFORMATION ONLY
D
Document does not require review or was not reviewed. Any associated work may proceed.

Note: Permission to proceed does not constitute acceptance of design details, calculations, test methods or materials developed/selected by the
vendor and does not relieve the vendor from full compliance with full contractual or other obligations nor detract from any purchaser rights.

Checked By: (if applicable) Approved By:

Print Name: Print Name: Satish Krishnan

Signature & Date: Signature & Date: 05.01.2021

Revision

VDRL Total No. of Pages

Document Number:
Code (including cover sheet)

D 2 1 2 IQWQ-KU00B-VDMEC-00-0001 50

Form No: IMT-FRM-1049 © 2017 Wood Group Limited

Rev/Date: C3 16-Jun-2017 This document is uncontrolled once printed. Check iMAP for the current version.
 MODIFICATIONS:
DRAWING No. MAT'L
SPARES
DRAWING No. THESE COMMODITIES, TECHNOLOGY OR

ITEM
ISSUE DESCRIPTION MATERIAL
A ORIGINAL ISSUE: B)FINAL EARG 052218 C)CHANGED HARDWARE MATERIALS TO SDUPLEX EARG 061818 D) PUMPING RING P.N. REVIEWED, WAS TAB-3672. NOTE #13 SOFTWARE ARE EXPORTED FROM THE
CODE
UNITED STATES IN ACCORDANCE WITH THE QTY
UPDATED. JLG 11419 E) CUSTOMER COMMENTS APPLIED. JLG 112019 F) FLOW DIRECTION ARROWS ADDED. JLG 121619 G) ITEM 26 DELETED THEY WERE EYE BOLTS EXPORT ADMINISTRATION REGULATIONS.
GA-213905-1 H JRVG 022820 H) GCN #198220 ADDED JRVG 022820 DIVERSION CONTRARY TO THE U.S. LAW
PROHIBITED. 1 TAB-3665-0952 9221 PRIMARY RING SILICON CARBIDE 2 X
2 TAB-1910-3750 9221 MATING RING SILICON CARBIDE 2 X
GLAND END 3 0000242 3779 O-RING PERFLUOROELASTOMER 2 X
REMOVE RED PLASTIC PLUGS. 4 TAB-1429-3750 7510 ANTI-X-RING FILLED PTFE 2 X
VIEW
"LBO" (4x) STUDS 5/8" - 11 UNC
@90° C.C.
ON A 7.087" (180.00) D.B.C.
! INSTALL METAL PLUGS OR PIPING
AS SHOWN ON THIS SEAL DRAWING
GLAND END
VIEW
5
6
7
8
0000240
TAB-3669-0952
TAB-1428-3750
10854-SPR
3779
2852
2852
0690
O-RING
RETAINING SLEEVE
DISC
SPRING
PERFLUOROELASTOMER
SUPER DUPLEX SS
SUPER DUPLEX SS
ALLOY C-276
2
1
1
16
X

X
4.553 9 TAB-3668-0952 2852 RETAINER SUPER DUPLEX SS 1
4.523 10 TAB-3863-0008 0690 SPECIAL DOG POINT GRUBSCREW ALLOY C-276 4 X
115.65 11 TAB-3670-0952 2852 DISC SUPER DUPLEX SS 1
114.88 TO NEAREST OBSTRUCTION MIN 12 0000235 3779 O-RING PERFLUOROELASTOMER 1
4.392

45°
D 13 TAB-3673-0952 2852 PUMPING RING SCROLL (CCW ROTATION) SUPER DUPLEX SS 1
111.56 14 H-0800M-5093 2852 SLEEVE SUPER DUPLEX SS 1
4.175 15 H-0800M-5094 2852 INNER GLAND PLATE SUPER DUPLEX SS 1
106.05 TO COLLAR

63
16 H-0800M-5095 2852 OUTER GLAND PLATE SUPER DUPLEX SS 1
4.078 17 0000256 3779 O-RING PERFLUOROELASTOMER 2 X
103.57 TO STUDS 18 71081250035 0690 SOCKET HEAD SCREW ALLOY C-276 4 X
3.321 19 TAB-3671-0952 7510 GASKET FILLED PTFE 2 X
"LBI" 84.35 TO GLAND 20 TAB-3858-0952 0594 DRIVE COLLAR DUPLEX S.S. 1
2.756 2.529 21 11371600010 0236 GRUB SCREW HARD ALLOY STEEL 9 X
70.00 64.24 22 H-0000-5249 0570 SETTING WASHER 316L S.S. SINTERED 4 X
1.181 2.390 1.169 23 22252010000 0550 HEX HEAD SCREW 316 S.S. 4 X
30.00 60.70 29.69 24 0000112 3779 O-RING PERFLUOROELASTOMER 1 X
25 D-0375-501 2852 3/8-NPT PLUG SUPER DUPLEX SS 1 X

CW 25 15 24 16 (2x) 1/2" NPT

SHAFT 10.500 MARK "LBI" & "LBO"
O 266.70
ROTATION

18

O 8.567
217.60
17 RUHRPUMPEN IDENTIFICATION NUMBERS
DRAWING STATUS 23
PROJECT No.
PART No.
111000534
CUS 64006806
PURCHASE No. 112602723
INFORMATION ONLY
FOR CUSTOMER APPROVAL 22 SEE NOTE #13
TO MEET DELIVERY PROMISE ONE APPROVED
COPY MUST BE RETURNED WITHIN TWO SEAL ASS'Y NO. BILL OF MATERIALS NUMBER
WEEKS AFTER DATE OF PRINT. 5.5134
ASSEMBLY
FINAL
MANUFACTURING PROCESS HAS BEEN
O 5.5118
140.04 63
IN : TAB-3656
SEAL HEAD
STARTED ANY REQUESTED CHANGE WILL
AFFECT PRICE AND/OR DELIVERY
140.00 OUT: SPARES KIT
PROMISE BORE DESCRIPTION ITEMS NUMBER

DATE OF PRINT: MAY / 22 / 2018 EQUIPMENT REFERENCE SEAL DATA

OEM: API PLAN: API CODE:
3 2 1 5 11 12 6 10 9 8 7 4 13 19 20 21 14 RUHRPUMPEN 02/53B 23A-PIP-080-02/53B
3.1496 EQUIPMENT TYPE: INSTRUCTION MANUAL REF.
6.565 O 3.1489
80.000
PUMP
MODEL, FRAME / SIZE MATERIAL CODE:
166.74 CARTRIDGE LENGTH
79.982 SCE, OH2 / 6X3X19 (A) X61 O58 1 X61 O58 H SDPLX/HC - INB
SHAFT SERIAL / DRAWING No.
141200218 REV. C X61 O58 1 X61 O58 H SDPLX/HC - OUT
FLOW CUSTOMER INFORMATION SERVICE DATA
CUSTOMER: FLUID:
DIRECTION KHUDAIRI TRADING AND CONTRACTING DMCC WATER (PRODUCED/EFFLUENT WATER)
P.O. NUMBER: PLANT ITEM NO: BARRIER FLUID:
P0-03993-01 D7-PAT684002_R03
PLAN 02 PLAN 53B 13. SPACER (ITEM #22) IS ONLY FOR THE PURPOSE OF PROPERLY LOCATING SEAL. AFTER GLAND PLATE, BEARING, AND SHAFT ARE LOCKED IN PLACE, END USER: CHAMBER PRESSURE:
TIGHTEN ALL SET SCREWS IN COLLAR, PRIOR TO UNIT STARTUP, ROTATE SPACERS CLEAR OF ROTATING PARTS AND LOCK IN PLACE WITH CAP SCREWS EXXONMODIL, IRAQ 8.8485 kg/cm²G E
DEAD-ENDED SEAL CHAMBER WITH NO D PROVIDED. LOCATION: SUCTION PRESSURE:
CIRCULATION OF FLUSHED FLUID
WATER-COOLED STUFFING-BOX JACKET DUBAI 4.41 NORM / 0.6 MAX kg/cm²A
PRESSURIZED EXTERNAL BLADDER 14. TO AVOID MOVEMENT OF THE SHAFT IN RELATION TO SEAL; SPOT FACE THE SHAFT UNDER MINIMUM OF TWO SERVICE: DISCHARGE PRESSURE:
AND THROAT BUSHING REQUIRED WHEN
TYPE RESERVOIR WITH FORCED EQUALLY SPACED SET SCREWS, WHEN IS AVAILABLE.
ESPECIFIED. EFFLUENT WATER INJECTION PUMP 39.08 kg/cm²G
CIRCULATION. REFERENCE DATA: PROCESS TEMPERATURE:
15. GLAND MUST BE IN CONTACT WITH HOUSING, DO NOT OVERSTRESS OV30198 P10 // 112602707 // TAB-3656 40 °C
THE FOLLOWING NOTES ARE IMPORTANT AND MUST BE OBSERVED FOR CORRECT SEAL INSTALLATION AND OPERATION SEAL FLUSH RATE: SHAFT SPEED: VAPOUR PRESSURE:
1. REMOVE ALL SHARP EDGES ON SHAFT & / OR SLEEVE BEFORE INSTALLATION OF SEAL. 11. VENT GAS ENTRAPMENT BEFORE STARTUP. FLUID SYSTEM DRG: 2960 RPM 0.02 kg/cm²A
6. WHEN SHAFT IS SLEEVED THROUGH STUFFING BOX, SLEEVE MUST BE LIQUID TIGHT THROUGH BORE. SPECIFIC GRAVITY: VISCOSITY:
12. ALL SHOULDERS OVER WHICH SEAL MUST PASS IPROJECTS NO:
2. SURFACE OF SHAFT OR SLEEVE ON WHICH SEAL IS INSTALLED MUST BE MACHINED TO
RA 0.002 FINISH OR BETTER.
7. SHAFT OR SLEEVE MUST BE CORROSION RESISTANT MATERIAL WITH A HARDNESS OF 125 BRINELL WHEN FITTING, TO BE PREPARED AS DIAGRAM 283530-MX01EN 1.120 1.12 cP
MINIMUM & BE MACHINED TO DIMENSIONS & TOLERANCES STATED. BELOW. DE / NDE DRG NO:
3. LUBRICATE SHAFT/SLEEVE & SEAL WEDGE RING/O-RING/BELLOW TO ASSIST SEAL SIZE: Ø80.00 mm
INSTALLATION OF SEAL WITH 8. END OF SEAL CHAMBER & AXIS OF SHAFT MUST BE AT 90° TO EACH OTHER WITHIN 0.002 F.I.M. BREAK 0.040
DEFINITION SEAL TYPE: 3648BB DUAL CARTRIDGE
4. FOR NON-CARTRIDGE SEALS, LUBRICATE MATING RING(SEAT), SEALING MEMBER, AND SCALE DATE DRAWN CHECKED APPROVED DESIGN AUTH.
9. DUAL PRESSURIZED SEAL, PRESSURE IN SEAL CHAMBER MUST BE MAINTAINED AT 30 PSI MINIMUM
.002
HOUSING TO ASSIST INSTALLATION.
ABOVE MAXIMUM PRESSURE GENERATED AT INNER SEAL.
5. FLUID MUST BE CIRCULATED AROUNG PRIMARY RING (SEAL)/THROUGH 20 NONE 040918 EARG JBM JRMB MX01EN
MATING RING (SEAT) ( AT NOT LESS THAN 4 GPM ) IN ORDER TO REMOVE HEAT 10. FOR NON-CARTRIDGE SEALS, PRIOR TO COMPLETING SEAL INSTALLATION, WIPE LAPPED SURFACES OF RAD ° DRAWING No. ISSUE
GENERATED, OR SEAL FAILURE MAY OCCUR. MATING RING (SEAT) & PRIMARY RING (SEAL FACE) PERFECTLY CLEAN.
ALL DIMENSIONS ARE INCHES UNLESS OTHERWISE SPECIFIED.
All intellectual property rights (including but not limited to copyright and design rights whether registered or unregistered) in relation to this drawing together with the information contained in this drawing (including but not limited to know-how and confidential information) is
proprietary to John Crane. Reproduction (whether in whole or in part) or use in any way whatsoever of this drawing or of any information contained therein is prohibited except with the prior written consent of John Crane. All rights in relation to this drawing are reserved.
GA-213905-1 H
A1