FLYWHEEL HORSEPOWER @ 1950 rpm

D65EX/PX-12 142 KW 190 HP

OPERATING WEIGHT:
D65EX-12 STANDARD TRACK 19295 kg 42,540 lb
LONG TRACK 20030 kg 44,160 lb
D65PX-12 20315 kg 44,790 lb

WITH HYDROSTATIC STEERING SYSTEM

CRAWLER DOZER

Photo may include optional equipment

 D65EX-12, D65PX-12 Crawler Dozer
W ALK-A
WALK -AROUND
ROUND
The Komatsu S6D125E-2 turbocharged
diesel engine provides an output of 142 kW
190 HP with excellent productivity, while meeting
current emissions standards. Left hand joystick controls all tractor
motion. Right hand joystick controls all
blade movements.

Gull-wing engine side doors

for easy and safer servicing.

High capacity Semi-U Tilt dozer (for D65EX),

Straight Tilt dozer (for D65PX), combine the
highest power in its class with outstanding
productivity.

Blade tilt lines

completely protected.

Forward mounted pivot

Komatsu Torqflow transmission shafts isolate final drives
offers single lever control of speed (3 forward from blade loads.
and 3 reverse) and directional changes.

2
 D65EX/PX
CRAWLER DOZER
Electronic Monitoring System prevents
minor problems from developing into major ones. FLYWHEEL HORSEPOWER
@ 1950 rpm

D65EX/PX-12 142 kW 190 HP

Optional hexagonal, low noise cab OPERATING WEIGHT
with viscous damping mounts provides unsurpassed
operator comfort and visibility. D65EX-12:
Standard track 19295 kg 42,540 lb
Long track 20030 kg 44,160 lb
D65PX-12: 20315 kg 44,790 lb

BLADE CAPACITY

Semi-U Tilt Dozer:

D65EX-12: 5.61 m3 7.34 yd3

Straight Tilt Dozer

D65PX-12: 3.69 m3 4.83 yd3

Wet, multiple-disc brakes

eliminates brake-band adjustments
for maintenance-free operation.

Hydrostatic Steering System (HSS)

provides smooth, quick, and powerful control
in varying ground conditions.

Bolt-on segmented sprocket teeth

for easy in-the-field replacement
Modular power train for increased
serviceability and durability.
Photo may include optional equipment.

3
 O
OPERATOR
PERATOR’’S
S
C
COMPARTMENT
OMPARTMENT
All steering, direction, and speed changes are made by a left-hand single joystick control. If the operator wants to
move the machine forward and to the left, he simply moves the joystick forward and to the left. If he desires a gear change,
he merely twists his wrist. The machine responds to the movement of the lever providing the operator with the feeling of
natural control with Komatsu’s joystick.
Low-Noise Design the cab’s hexagonal design provides excellent front, side,
For smoother riding comfort, power train components and and rear visibility. The viscous dampening cab mounts
hydraulic control valves are mounted to the frame with suspension soften shocks for operator comfort and extends
rubber pads to soften vibration and shut out noise. Since component life.
the D65 employs joysticks, the walk-through operator com- Easy-to-Operate Work Equipment Control Lever
partment is uncluttered for smooth entry and exit.
With the Closed-center Load Sensing (CLSS) hydraulic
An adjustable seat with backrest is standard equipment.
system, blade lever stroke is directly proportional with blade
speed, regardless of the load and travel speed. This results
Three-stage height adjustable armrests
in superb, fine controllability.
Three-stage height adjustable arm rests and relocated fuel
control lever provide comfortable operation and increased Benefits of CLSS
leg space. ● More precise and responsive operation due to the
pressure compensation valve.
Hexagonal Pressurized Cab (Optional) ● Reduced fuel consumption by discharging only the
Air filters and a higher internal air pressure combine to required amount of oil from the pump.
prevent external dust from entering the cab. In addition, ● The work equipment moves smoothly for operations such
as side-cutting even when priority is given to steering.

CLSS for D65EX-12 and D65PX-12

Steering Work
Cylinder motor equipment

Cylinder

PPC

Servo valve Servo valve

Three-stage height
Photo may include optional equipment.
adjustable arm rests

4
 D65EX/PX
CRAWLER DOZER

Hydrostatic Steering System— Electronic

Smooth, Powerful Turning Monitoring
For models D65EX-12 and D65PX-12 the Hydraulic Steering System (HSS) distributes System
power to both tracks without power interruption on the inside track. When the machine turns
the outside track moves faster and the inside slower, for smooth, powerful turns. The left and right An electronic monitoring
system prevents minor
tracks can be counter-rotated for a minimum turning radius providing excellent maneuverability.
problems from developing
Shock-free steering reduces machine vibration and minimizes operator fatigue.
into major ones. All meters
● Turning while dozing—the machine turns by driving the left and right tracks under power and gauges are controlled by a
at different speeds allowing the machine to travel at the same speed as in straight dozing. microcomputer, which provides
a wide indication range for an
● Side-cutting—when side-loading the blade, straight travel can be maintained utilizing HSS. easier, more precise reading.
● On downhill slopes—the machine doesn’t require cross steering. The joystick
provides the same steering
response on downhill slopes
as on flat ground. Steering
Motor
● Grading—can be done efficiently
without damaging the ground, Right
Sprocket
because the inside track is not
locked during turning.

● Counter-rotates for exceptional Steering

Planetary
maneuverability. ● Charge Light
Bevel Gear
Left
Sprocket
● Engine Oil Pressure
Caution Light
Wet Disc Brakes
● Engine Water
Temperature
Caution Light
● Engine Water
Temperature Gauge
● Fuel Gauge
● Intake Air Heater Light
● Monitor Caution
Cancel Switch
● Monitor Caution Light
● Service Meter
● Transmission
Oil Temperature
Caution Light
● Transmission Oil
Temperature Gauge
● Transmission Gear Indicator

Steering Functions Blade Functions Ripper Functions

Forward and Lifting and (Optional)
reverse lowering Raise and
Right and left Tilting lower
steering

First, to second,
Left Hand to third shifting Right Hand

5
 U
UNDERCARRIAGE
NDERCARRIAGE
AND F
AND FRAME
RAME
Undercarriage
Low Drive and Long Track Undercarriage
Komatsu’s design is extraordinarily tough and offers excellent grading ability and stability.
Large-diameter bushings, increased track link heights, and improved oil-seals help to
increase undercarriage durability.

Improvements
Numerous improvements to increase undercarriage reliability and durability have been
incorporated. Serviceability has also been improved with the addition of remote greasing
of the equalizer bar center pin.

Addition of Long Track Version (EX Series)

A long track version (the same length of track on ground with PX models) has been
added to D65EX to increase operational stability.

Photo may include optional equipment

6
 D65EX/PX
CRAWLER DOZER

Frame
Flat Bottom Frame
A flat bottom frame, the monocoque track frames and
forward-mounted pivot shafts provide good maneuverability
in muddy terrain by preventing mud from building up under
the frame.

Modular Designed Power Train Units

The modular design allows easy removal and installation
of any individual unit for shorter downtime.

Wet, Multiple-Disc Brakes

Eliminates brake-band adjustments for
maintenance-free operation.

Durability
Because fewer components mean greater reliability, we’ve designed a simple hull frame
made of a thick, single plate. Track frames have a large-section construction for maximum
rigidity. Even the box-section construction of the blade back beam is reinforced, all with dura-
bility in mind.

Reservoir Test Ports

A radiator coolant reservoir makes it easier Oil pressure test ports for the power train
to check the coolant level and eliminates are centralized on the right hand side of the
frequent refilling. operator platform for easy access.

Wet, multiple-disc brakes eliminate

brake adjustment for maintenance-
free operation.

7
 E
ENGINE
NGINE AND
AND
T
TORQUE
ORQUE C
CONVERTER
ONVERTER

Komatsu S6D125E-2
Turbocharged Diesel Engine
Powerful Engine
A powerful S6D125E-2 turbocharged diesel engine
provides a massive output of 142 kW 190 HP. The
engine power is transmitted smoothly to the final
drives via a high-efficiency torque converter. This
engine also meets current emissions standards,
without sacrificing power or machine productivity.
Gull-Wing Engine Side Covers

A gas-spring cylinder opens the gull-wing engine side covers widely, allowing
the engine and auxiliary components to be easily checked.

Photo may include optional equipment

8
 D65EX/PX
CRAWLER DOZER

S
SPECIFICATIONS
PECIFICATIONS
ENGINE FINAL DRIVE
Model: Double-reduction final drives of spur gear and planetary gears to mini-
D65EX, PX-12 . . . . . . . . . . . . . . . . . . . . . . . Komatsu S6D125E-2 mize transmission of shocks to power train components. Segmented
Type . . . . . . . . . . . . . . . . 4-stroke cycle, water-cooled, emissionized, sprocket are bolt-on for easy in-the-field replacement.
direct injection
Aspiration:
D65EX, PX-12 . . . . . . . . . . . . . . . . . . . . . . . Turbocharged engine
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mm 4.92" STEERING
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mm 5.91" Joystick controls for all directional movements. Pushing the joystick
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 ltr 674 in3 forward results in forward machine travel, while pulling it rearward
Gross horsepower*: reverses the machine. Simply tilt the joystick to the left to make a
D65EX, PX-12 . . . . . . . . . . . . . . . . . 153 kW 205 HP @ 1950 rpm left turn. Tilt it to the right for a right turn.
Net flywheel horsepower*:
D65EX, PX-12 . . . . . . . . . . . . . . . . . 142 kW 190 HP @ 1950 rpm The Hydrostatic Steering System (HSS) is comprised of a hydraulic
Net maximum torque: pump and motor. This design allows for counter rotation under certain
D65EX, PX-12 . . . . . . . 981 N•m 100 kg•m 723 lb ft @ 1200 rpm ground conditions. Wet, multiple-disc, pedal-controlled service brakes
Direct injection fuel system. All-speed mechanical governor. Forced are spring-actuated and hydraulically-released. The directional and
lubrication driven by gear pump. Full-flow for lube purification. gear control joystick lock lever also applies the brakes.
Dry-type air cleaner with automatic dust evacuator and dust indica- Minimum turning radius*:
tor. 7.5 kW/24V electrical starter motor. 35 A/24V alternator. 140 D65EX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3"
Ah/2 x 12V batteries. D65EX-12 Long Track . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3"
D65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 m 8'10"
* Net flywheel horsepower output for standard engine (SAE J1349) *As measured by track marks on ground.
including air cleaner, alternator (not charging), water pump, lubricating
oil pump, fuel pump, muffler, and fan.

UNDERCARRIAGE
TORQFLOW TRANSMISSION Suspension . . . . . . . . . . . . . . . . . . . . . Oscillation with equalizer bar
and forward mounted pivot shafts
Komatsu’s TORQFLOW transmission consists of a water-cooled,
Track roller frame. . . . . . . . . . . . . . . . . . . Monocoque, large section,
3-element, 1-stage, 1-phase torque converter and a planetary gear,
durable construction
multiple-disc clutch transmission which is hydraulically actuated and
Number of carrier rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . 2
force-lubricated for optimum heat dissipation. Joystick control of
Track shoes. . . . . . . . . . . . . . . Lubricated tracks. Unique dust seals
gears (3 forward and 3 reverse) and directional steering changes.
for preventing entry of foreign abrasives into
Gearshift lock lever and neutral safety switch prevent machine
pin-to-bushing clearances for extended service.
from accidental starts.
Track tension is easily adjusted with a grease gun.

Travel speed Forward Reverse D65EX-12 D65EX-12 LT D65PX-12

1st 0–3.9 km/h 0–2.4 mph 0–5.0 km/h 0–3.1 mph Number of track rollers (each side) 7 8 8
2nd 0–6.8 km/h 0–4.2 mph 0–8.6 km/h 0–5.3 mph Number of shoes (each side) 39 45 45
3rd 0–10.6 km/h 0–6.6 mph 0–13.4 km/h 0–8.3 mph Grouser height mm in 65 2.6" 65 2.6" 65 2.6"
Shoe width (standard) mm in 510 20.1" 510 20.1" 915 36.0"
Ground contact area cm2 27285 33505 60115
D65EX/PX-12 in2 4,230 5,193 9,318
kg x 103
lb x 103

Power Shift Ground pressure kPa 55.9 48.1 27.5

kN

320 DRAWBAR PULL VS. SPEED. (Tractor) kgf/cm2 0.57 0.49 .28
64
30 MAXIMUM USABLE PULL DEPENDS ON psi 8.11 6.97 3.98
280 TRACTION AND WEIGHT OF TRACTOR
INCLUDING MOUNTED EQUIPMENT. Track gauge mm in 1880 6'2" 1880 6'2" 2050 6'9"
56
240 Length of track on ground mm ft.in 2675 8'9" 3285 10'9" 3285 10'9"
48
Drawbar pull

200 20
40
F1
160
32
F2
120
24
10
80
16 F3
40 8

0 0 0
0 2 4 6 8 10 12 14 km/h
0 2 4 6 8 MPH

Travel speed

9
 DIMENSIONS

I, I* H, H*

D C

G.L.
G
F M M
B E L
A K

FVD00585
Ground clearance . . . . . . . . . . . . . .405 mm 1'4"

D65EX-12 D65EX-12 LT D65PX-12

A 5440 mm 17'10" 5440 mm 17'10" 5520 mm 18’1"
B 1880 mm 6'2" 1880 mm 6'2" 2050 mm 6'9"
C 3165 mm 10'5" 3165 mm 10'5" 3165 mm 10'5"
D 2990 mm 9'10" 2990 mm 9'10" 2990 mm 9'10"
E 2675 mm 8'9" 3285 mm 10'9" 3285 mm 10'9"
F 510 mm 20.1" 510 mm 20.1" 915 mm 36.0"
G 65 mm 2.6" 65 mm 2.6" 65 mm 2.6"
H 1270 mm 4'2" 1270 mm 4'2" 1270 mm 4'2"
H* 1830 mm 6'0" 1830 mm 6'0" 1830 mm 6'0"
I 1490 mm 4'11" 1490 mm 4'11" 1490 mm 4'11"
I* 1600 mm 5'3" 1600 mm 5'3" 1600 mm 5'3"
J 2300 mm 7'7" 2300 mm 7'7" 2300 mm 7'7"
K 1220 mm 4'0" 1220 mm 4'0" N/A
L 2170 mm 7'1" 2170 mm 7'1" N/A
M 950 mm 3'1" 950 mm 3'1" N/A

Dimension with semi-U dozer and multi-shank ripper (D65EX/EX LT) and straight tilt
dozer (D65PX).
*ROPS canopy without cab.

COOLANT AND LUBRICANT

CAPACITY (REFILLING) OPERATING WEIGHT (APPROXIMATE)

Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ltr 13.7 U.S. gal Tractor weight:

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 ltr 107.3 U.S. gal Including rated capacity of lubricant, coolant, full fuel tank, operator
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ltr 10.0 U.S. gal and standard equipment.
Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 ltr 0.4 U.S. gal
Transmission, bevel gear, D65EX-12
and steering system . . . . . . . . . . . . . . . . . . . 48 ltr 12.7 U.S. gal Standard Track. . . . . . . . . . . . . . . . . . . . . . 15670 kg 34,550 lb
Final drive (each side) Long Track . . . . . . . . . . . . . . . . . . . . . . . . . 16405 kg 36,170 lb
D65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16950 kg 37,370 lb
D65EX-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 ltr 6.3 U.S. gal
D65PX-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ltr 7.1 U.S. gal Operating weight:
Including semi U-tilt dozer (E/EX) or straight tilt dozer (P/PX), ROPS
canopy, steel cab, operator, standard equipment, rated capacity of
lubricant, coolant, and full fuel tank.

D65EX-12
Standard Track. . . . . . . . . . . . . . . . . . . . . . 19295 kg 42,540 lb
Long Track . . . . . . . . . . . . . . . . . . . . . . . . . 20030 kg 44,160 lb
D65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20315 kg 44,790 lb

10
 D65EX/PX
CRAWLER DOZER

HYDRAULIC SYSTEM

Closed-center Load Sensing System (CLSS) designed for precise Control valves:
and responsive control and for efficient simultaneous operation. Spool control valve for semi-U tilt dozer and straight tilt dozer.
Positions:
Hydraulic control unit:
Blade lift . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
All spool control valves externally mounted beside the hydraulic
Blade tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
tank.
Spool control valve for angle dozer.
Type of pump:
Positions:
D65EX/PX . . . . . . . . . . . . . . . Variable displacement plunger-type
Blade lift . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
Capacity (discharge flow at rated engine rpm):
Additional control valve for multi-shank ripper
D65EX/D65PX . . . . . . . . . . . . . . . . . 210 ltr/min 55.5 U.S. gal/min
Positions:
Relief valve setting . . . . . . . . . . . . . 20.6 MPa 210 kg/cm2 2,990 psi
Ripper lift . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold, and lower
Hydraulic cylinders . . . . . . . . . . . . . . . . . . . . Double-acting, piston
Hydraulic oil capacity (refilling):
Semi-U tilt dozer. . . . . . . . . . . . . . . . . . . . . . 55.0 ltr 14.5 U.S. gal
Number of cylinders Bore Straight tilt dozer . . . . . . . . . . . . . . . . . . . . . 55.0 ltr 14.5 U.S. gal
Angle tilt dozer . . . . . . . . . . . . . . . . . . . . . . . 55.0 ltr 14.5 U.S. gal
Blade lift 2 95 mm 3.74"
Multi-shank ripper . . . . . . . . . . . . . . . . . . . . . 55.0 ltr 14.5 U.S. gal
Blade tilt 1 140 mm 5.51"
Ripper lift 1 140 mm 5.51"

DOZER EQUIPMENT

Use of high tensile strength steel in moldboard for strengthened blade construction.

Overall Length Blade Blade Max. Lift Max. Drop Max. Tilt Additional Weight Additional
With Dozer Capacity* Width x Height Above Ground Below Ground Adjustment Dozer Hydraulic control unit Ground
mm ft.in m3 yd3 mm ft.in mm ft.in mm ft.in mm ft.in Equipment EX/PX Pressure*2
D65EX-12 5440 5.61 3460 x 1425 1105 440 465 2280 720
10.8/0.11/1.56
Semi-U Tilt Dozer 17'10" 7.34 11'4" x 4'8" 3'8" 1'5" 1'6" 5,030 1,590
D65EX-12 5260 3.89 3415 x 1225 1105 440 460 2000 720
9.8/0.10/1.42
Straight Tilt Dozer 17'3" 5.09 11'2" x 4'0" 3'8" 1'5" 1'6" 4,410 1,590
D65EX-12 5470 3.55 3970 x 1100 1185 450 400 2280 650
10.8/0.11/1.56
Angle Dozer 17'11" 4.64 13'0" x 3'7" 3'11" 1'6" 1'4" 5,030 1,430
D65PX-12 5520 3.69 3970 x 1100 1105 540 450 2030 710
4.5/0.046/0.65
Straight Tilt Dozer 18'1" 4.83 13'0" x 3'7" 3'8" 1'9" 1'6" 4,480 1,570
Remarks:
* Blade capacities are based on the SAE recommendation practice J1265.
*2 Indicates additional ground pressure to D65EX/D65PX tractor. (unit: kPa/kgf/cm2/psi)

STANDARD EQUIPMENT FOR BASE MACHINE

● Air cleaner, double element with ● Intake pipe with precleaner ● Suspension seat, with high-back
dust indicator ● Lighting system, (includes 2 front, 1 rear) ● Track roller guard, center section
● Alternator, 35 ampere ● Locks, filler caps and covers (EX Long Track, PX)
● Backup alarm ● Mono-lever steering ● Track roller guard, end sections (EX)
● Batteries, 140 Ah/2 x 12V ● Muffler with curved exhaust pipe ● Track shoe assembly
● Blower cooling fan ● Pressure test ports for power train —Heavy-Duty sealed and lubricated track
● Decelerator pedal ● Radiator guard door, flat ● 510 mm 20" single grouser
● Electronic instrument monitor panel ● Radiator reserve tank shoe (EX, EX Long Track)
● Engine hood ● Rear cover ● 915 mm 36.0" single grouser shoe
● Engine side covers, gull-wing ● ROPS mounting brackets (PX)
● Fenders ● Seat belt, retractable ● Underguards, oil pan and transmission
● Front pull hook ● Starting motor, 7.5 kW/24V
● High mount foot rests ● Steering system:
–HSS (Hydrostatic Steering System)

11
 OPTIONAL EQUIPMENT

● Air conditioner ● Heater and defroster ● ROPS canopy with sweep

● AR track assembly (abrasion ● Hitch type drawbar ● Suspension seat, reclining with
resistant bushings) ● Hydraulics for ripper (EX, EX LT) fabric material (cab only)
● Cab ● Hydraulics for tilt dozer ● Track roller guard, full length
● Cab accessories ● Light working, cab additional ● Underguard, heavy-duty
—Cup holder ● Radiator core protective grid ● Vandalism protection cover
—Lunch box holder ● Rigid type drawbar for instrument panel
—Rear view mirror ● ROPS canopy ● Water separator

ROPS CANOPY STEEL CAB MULTI-SHANK RIPPER

● Additional weight 420 kg 930 lb ● Additional weight 285 kg 630 lb (for D65EX/EX LT)
● Meets ISO 3741, SAE J1040 APR88, ● All-weather, enclosed pressurized cab ● Additional weight (including hydraulic
and ISO 3449 FOPS standards. ● Dimensions: control unit): 1680 kg 3,700 lb
● Roof dimensions: —Length: 1765 mm 5'9" ● Beam length: 2170 mm 7'1"
—Length: 1830 mm 6'0" —Width: 1720 mm 5'8" ● Maximum digging depth: 595 mm 1'11"
—Width: 1600 mm 5'3" —Height: 1625 mm 5'4" ● Maximum lift above ground: 640 mm 2'1"
—Height from operator compartment —Height from floor to ceiling:
floor: 1700 mm 5'7" 1515 mm 5'0"

● Additional ground pressure ● Additional ground pressure ● Additional ground pressure

D65EX D65EX D65EX
1.5 kPa/0.015 kg/cm2/0.21 psi 1.0 kPa/0.010 kg/cm2/0.14 psi 5.9 kPa/0.06 kg/cm2/0.85 psi
D65EX Long Track D65EX Long Track D65EX Long Track
1.3 kPa/0.013 kg/cm2/0.18 psi 0.9 kPa/0.009 kg/cm2/0.13 psi 4.9 kPa/0.05 kg/cm2/0.71 psi
D65PX D65PX
0.7 kPa/0.007 kg/cm2/0.10 psi 0.6 kPa/0.006 kg/cm2/0.09 psi

ROPS CANOPY FOR CAB SHOES

● Additional weight 340 kg 750 lb
● Meets ISO 3471, SAE J1040, SAE J395 Models Shoe Additional weight Ground contact Additional ground
area pressure to tractor
ROPS and ISO 3449 FOPS standards
560 mm 22.0" -3.9 kPa
● Roof dimensions: single-grouser +120 kg 29960 cm2 -0.04 kg/cm2
—Length: 1270 mm 4'2" +260 lb 4,644 in2
shoe -0.57 psi
—Width: 1490 mm 4'11" D65EX 610 mm 24.0" -7.8 kPa
—Height from operator compartment +230 kg 32635 cm2
Standard single-grouser -0.08 kg/cm2
floor: 1705 mm 5'7" +510 lb 5,058 in2
Track shoe -1.14 psi
D65EX
660 mm 26.0" -11.8 kPa
1.2 kPa/0.012 kg/cm2/0.17 psi +360 kg 35310 cm2
single-grouser -0.12 kg/cm2
D65EX Long Track +790 lb 5,473 in2
shoe -1.71 psi
1.0 kPa/0.010 kg/cm2/0.14 psi
560 mm 22.0" -3.9 kPa
D65PX +140 kg 36790 cm2
D65EX single-grouser -0.04 kg/cm2
0.6 kPa/0.006 kg/cm2/0.09 psi +310 lb 5,702 in2
shoe -0.57 psi
Long Track 610 mm 24.0" -6.9 kPa
+270 kg 40075 cm2
single-grouser -0.07 kg/cm2
shoe +600 lb 6,212 in2 -1.00 psi
950 mm 37.4" -1.0 kPa
+50 kg 62420 cm2
D65PX circular-arc -0.01 kg/cm2
+110 lb 9,675 in2
shoe -0.14 psi

AESS575-00 ©2002 Komatsu Printed in USA DK2(5M)C DataKom 2/02 (EV-1)

Komatsu America International Company

440 N. Fairway Dr., Vernon Hills, IL 60061

www.KomatsuAmerica.com Materials and specifications are subject to change without notice

is a trademark of Komatsu Ltd. Japan