Poultry House Construction
Poultry House Construction
Poultry House Construction
Selection of location
Poultry house should be located away from residential and industrial area.
It should have proper road facilities.
It should have the basic amenities like water and electricity.
Availability of farm labourers at relatively cheaper wages.
Poultry house should be located in an elevated area and there should not be any water-logging.
It should have proper ventilation.
A small size poultry farm doesn’t require any special layout as it involves construction of only one house. The medium
and large size farms require special considerations for placement of building in the farm premises. The basic principles
to be observed for layout are
Layout should not allow visitors or outside vehicles near the birds.
The sheds should be so located that the fresh air first passes through the brooder shed, followed by grower and
layer sheds. This prevents the spread of diseases from layer houses to brooder house.
There should be a minimum distance of 50-100 feet between chick and grower shed and the distance between
grower and layer sheds should be of minimum 100 metre.
The egg store room, office room and the feed store room should be located near entrance to minimize the
movement of people around the poultry sheds.
The disposal pit and sick room should be constructed only at the extreme end of the site.
Different types of poultry houses
Brooder / chick house-It is used to brood and rear egg-type chicks from 0 to 8 weeks of age.
Grower house-It is used to grow egg-type birds from 9 to 18 weeks of age.
Brooders cum grower house-Here, the birds are reared from 0 to 18 weeks of age (entire brooding and growing
period of egg-type chicken).
Layer house-In which birds over 18 weeks of age are reared, usually up to 72 weeks of age.
Broiler house-In which broilers are reared up to 6 weeks of age.
Breeder house-In which both male and female breeders are maintained at appropriate sex ratio.
Environmentally controlled (EC) house-In which, entire environment is manipulated in such a way that is
optimum for the birds growth.
Size
Each broiler require one square foot of floor space while a layer requires two square feet of floor space under deep-litter
system of rearing. So the size of the house depends on the number of birds to be reared.
Length
The length of the house can be of any extent. The number of birds reared and availability of the land determines
the length of poultry house.
Width
The open sided poultry houses in tropical countries should have a width not more than 22 to 25 feet in order to
allow ample ventilation and aeration at the mid-portion. Sheds wider than this will not provide adequate ventilation
during the hot weather. If the width of the shed is more than 25 feet, ridge ventilation at the middle line of the roof top
with proper overhang is a must. Hot air and obnoxious gases which are lighter than air move upward and escape
through ridge ventilation. In environmentally controlled poultry houses, the width of the house may be even 40 feet or
more since the ventilation is controlled with the help of exhaust fans.
Height
The height of the sides from foundation to the roof line should be 6 to 7 feet (eaves height) and at the centre 10 to
12 feet. In case of cage houses, the height is decided by the type of cage arrangements (3 tier or 4 tier).
Foundation
Good foundation is essential to prevent seepage of water into the poultry sheds. The foundation of the house should of
concrete with 1 to 1.5 feet below the surface and 1 to 1.5 feet above the ground level.
Floor
The floor should be made of concrete with rat proof device and free from dampness. The floor of the house should be
extended 1.5 feet outside the wall on all sides to prevent rat and snake problems.
Doors
The door must be open outside in case of deep-litter poultry houses. The size of door is preferably 6 x 2.5 feet. At
the entry, a foot bath should be constructed to fill with a disinfectant.
Side walls
The side wall should be of 1-1.5 feet height, and generally at the level of bird’s back height. This side wall protects
the bird during rainy days or chill climate and also provides sufficient ventilation. In case of cage houses, no side wall is
needed.
Roof
The roof of the poultry house may be thatched, tiled, asbestos or concrete one depending upon the cost
involvement. Different types of roofs are Shed, Gable, half-monitor, full-monitor (Monitor), Flat concrete, Gambrel,
Gothic etc. Gable type is mostly preferred in tropical countries like India.
Overhang
The overhang of the roof should not be less than 3.5 feet in order to prevent the entry of rain water into the shed.
Lighting
Light should be provided at 7-8 feet above the ground level and must be hanged from ceiling. If incandescent
bulbs are used, the interval between two bulbs is 10 feet. In case of fluorescent lights (tube lights) the interval is 15 feet.
1. Availability of land
2. Cost of land
3. Type of farming activity
4. Climatic condition
5. Labour availability
Advantages
Disadvantages
2) Semi-intensive system
As the name indicates birds are half-way reared in houses and half-way on ground or range, i.e. birds are confined
to houses in night or as per need and they are also given access to runs. The houses are with solid floors while runs are
fields only. The success of rearing depends on maintenance of condition of runs to reduce the contamination. Runs can
also be used on turn basis. The stocking density rate on an average for adult birds is 750 per hectare. This system is
usually adopted for duck rearing. The feeding and watering facilities are provided in the pen.
Advantages
Disadvantages
3) Intensive system
Birds are totally confined to houses either on ground / floor or on wire-netting floor in cages or on slats. It is the
most efficient, convenient and economical system for modern poultry production with huge numbers.
Advantages
Disadvantages
Birds’ welfare is affected. They cannot perform the natural behaviour like roosting, spreading wings, scratching
the floor with legs etc.
Since they are not exposed to outside sunlight and feed sources, all the nutrients should be provided in balanced
manner to avoid nutritionally deficient diseases.
Chances for spreading of diseases are more.
In this system the birds are kept inside the house all the time. Arrangement for feed, water and nest are made inside
the house. The birds are kept on suitable litter material of about 3” to 5” depth. The word litter is used for fresh litter
material spread on the floor. Usually paddy husk, saw dust, ground nut hulls, chopped paddy straw or wood shavings
are used as litter materials. This arrangement saves labour involved in frequent cleaning of faecal matter (droppings),
however it needs periodical stirring. The litter is spread on the floor in layers of 2” height every fortnightly till the
required is achieved.
Advantages
Vit B2 and Vit B12 are made available to birds from the litter material by the bacterial action.
The welfare of birds is maintained to some extend
The deep litter manure is a useful fertilizer.
Lesser nuisance from flies when compared to cage system.
Disadvantages
Because of the direct contact between bird and litter, bacterial and parasitic disease may be a problem.
Respiratory problems may emerge due to dust from the litter.
The cost of litter is an additional expenditure on production cost.
Faults in ventilation can have more serious consequences than in the cage system
In a slatted floor, iron rods or wood reapers are used as floor, usually 2-3 feet above the ground level to facilitate fall of
droppings through slats. Wooden reapers or iron rods of 2” diameter can be used on lengthwise of the house with
interspaces of 1” between rods.
Advantages
Less floor space per bird is needed when compared to solid floor system.
Bedding is eliminated
Manure handling is avoided
Increased sanitation
Saving in labour
Soil borne infection is controlled
Disadvantages
This system is commonly practiced for rearing birds for hatching eggs production, particularly meat-type breeders. Here,
a part of the floor area is covered with slats. Usually, 60% of the floor area is covered with slats and rest with litter.
Feeders and waterers are arranged in both slat and litter area. In case of breeder flock, nest boxes are usually kept on
litter area.
Advantages
More eggs can be produced per unit of floor space than all solid floors.
Fertility is better with the slat cum litter house than with the all-slat house.
Disadvantages
Housing investment is higher with the slat cum litter house than with the all-litter house.
The separation of birds from the manure beneath the slats commonly results in fly problems.
Cage System
This system involves rearing of poultry on raised wire netting floor in smaller compartments, called cages, either fitted
with stands on floor of house or hanged from the roof. It has been proved very efficient for laying operations, right from
day-old to till disposal. At present, 75% of commercial layers in the world are kept in cages. Feeders and waterers are
attached to cages from outside except nipple waterers, for which pipeline is installed through or above cages. Auto-
operated feeding trolleys and egg collection belts can also be used in this rearing system. The droppings are either
collected in trays underneath cages or on belts or on the floor or deep pit under cages, depending on type of cages.
Advantages
Disadvantages
Types of cages
Based on the number of birds in a cage, it is classified as
a) M-type cages
b) L-type cages
Broiler cages
1) Brooder cage / chick cage
Brooder cage
2) Grower cage
Grower cage Grower cage
Specifications: Front feeding length : 30 inch
Front & Back height : 15 inch
Depth : 18 inch
No. of growers (9 to 18 weeks) accommodated per box : 10
3) Layer cage
Two types of stair-step layer cages are commonly used in open-sided poultry houses
A. Conventional cages
B. Reverse cages (Californian cages)
a).Conventional cages
Specifications for each box: Front feeding length : 15 inch
Front height : 18 inch
Back height : 15 inch
Depth : 18 inch
b).Reverse cages
Specifications for each box: Front feeding length : 18 inch
Front height : 18 inch
Back height : 15 inch
Depth : 15 inch
These cages can hold 3 to 4 birds. They are arranged either in 2-tier or 3-tier. A slope of 1/6 is provided in conventional
cages, where as in reverse cages the slope is 1/5.
1. More feeding space is available in reverse cages. So, all 4 birds can take feed at a time, where as in conventional
cages, 3 birds can take feed and the other one is waiting at the back.
2. Number of cracked eggs is less due to lesser rolling distance.
3. Better ventilation in reverse cages than conventional cages.
0-4 0.30 -
Meat-type chicken
4-8 0.75 -
Source:
http://www.agritech.tnau.ac.in/expert_system/poultry/Poultry%20House%20Construction.html