Manual 000068729
Manual 000068729
Pages
User’s Guide
www.apple.com
034-2644-A
Printed in XXXX
K Apple Computer, Inc. Apple, the Apple logo, AppleWorks, iBook, iMovie,
© 2005 Apple Computer, Inc. All rights reserved. iTunes, Mac, Mac OS, PowerBook, and QuickTime are
trademarks of Apple Computer, Inc., registered in the
Under the copyright laws, this manual may not be
U.S. and other countries.
copied, in whole or in part, without the written consent
of Apple. Your rights to the software are governed by Finder, iPhoto, iWork, Pages, and Safari are trademarks
the accompanying software license agreement. of Apple Computer, Inc.
The Apple logo is a trademark of Apple Computer, Inc., AppleCare is a service mark of Apple Computer, Inc.,
registered in the U.S. and other countries. Use of the registered in the U.S. and other countries.
“keyboard” Apple logo (Option-Shift-K) for commercial
Adobe and Acrobat are trademarks or registered
purposes without the prior written consent of Apple
trademarks of Adobe Systems Incorporated in the U.S.
may constitute trademark infringement and unfair
and/or other countries.
competition in violation of federal and state laws.
Other company and product names mentioned herein
Every effort has been made to ensure that the
are trademarks of their respective companies. Mention
information in this manual is accurate. Apple is not
of third-party products is for informational purposes
responsible for printing or clerical errors.
only and constitutes neither an endorsement nor a
Apple recommendation. Apple assumes no responsibility
1 Infinite Loop with regard to the performance or use of these
Cupertino, CA 95014-2084 products.
408-996-1010
www.apple.com
Contents
3
75 Style Overrides
76 Finding and Replacing Styles
76 Modifying and Creating New Paragraph Styles
80 Modifying and Creating New Character Styles
83 Modifying and Creating New List Styles
4 Contents
137 Adjusting Size and Position of Objects
169 Chapter 10: Printing and Exporting Your Document to Other Formats
169 Printing Your Document
175 Exporting to Other Document Formats
187 Index
Contents 5
Welcome to Pages
Preface
Pages is a streamlined, yet powerful word-
processing application that gives everyone the
ability to easily create great-looking documents,
from a simple letter or invitation to a monthly
newsletter or three-panel brochure. This preface
provides an overview of the features of Pages and a
list of resources for learning to use it.
Pages makes it easy to compose and design a variety of documents on your
computer, from a simple memo, to a neatly structured school report, to a highly
designed, elegant brochure. With the Pages tools, you can easily change the layout
and look of any document as you work. Present your data using any of the tables or
charts built right into Pages. Incorporate a multitude of text and graphics types—you
can even include movies, hyperlinks, and audio if you intend to publish your
document online. Use the templates that come with Pages to create smart,
consistently styled documents. Or create your own to suit your specific needs. With
Pages, anything you write is a pleasure to read.
Your Pages document can be exported to several different file types, including HTML
for online viewing, PDF, and Microsoft Word.
7
Pages Features at a Glance
Easy to Use
Using the templates that come with Pages, it’s easy to create professional-looking
documents. Text and image placeholders let you customize document designs with
drag-and-drop ease. Import documents from Microsoft Word and AppleWorks. Or
create your own templates and share them with your colleagues.
Insert multiple-column
layouts.
User’s Guide
This guide (what you’re reading now) describes the features of Pages and shows you
how to use it. To see a full-color PDF file of this guide, choose Help > Pages User
Guide.
Chapter 1 of this guide describes the tools that are available in Pages, and Chapter 2
shows you a step-by-step workflow for creating a document. For more detailed
information about each step, refer to Chapters 3 through 10. If you want to learn how
to create your own templates, read Chapter 11.
Onscreen Help
To see the help, choose Help > Pages Help. You can browse through the table of
contents to find a specific topic, or enter a question in the search field to find an
answer about how to accomplish a task.
You can add the Help button to the Pages toolbar to make Pages Help available in a
single click. To learn about customizing the toolbar, see “The Toolbar” on page 22.
Note: To do many of the tasks in this book (and in Pages Help), you use menu
commands. The instructions look like this:
m Choose View > Zoom > Actual Size.
The first term after Choose is the menu you click; the next term is the item you choose
from that menu, as shown below.
Pages Tour
For an onscreen demonstration of what you can do with Pages, view the tour.
To see the onscreen tour:
m Choose Help > iWork Tour, and then follow the onscreen instructions.
Pages Templates
Pages comes with templates that illustrate the different layouts and styles you can
create. Type directly into the templates to create your own documents. You can also
use the designs and elements in these templates to enhance your own document by
copying and pasting bullets, chart styles, and background images, or by using the
same layouts and styles.
For more information, see “Step 1: Select a Document Type” on page 30.
Web Resources
Go to www.apple.com/pages to get the latest software updates and information. You
can also purchase Pages products on the web.
To find out about Pages products and get up-to-date information:
m Choose Help > Pages on the Web.
You can drag or place objects on a page, including imported graphics, movies, and
sound, or text boxes, charts, tables, and shapes that you create within Pages. New
pages are added automatically as you type into your document. You can also add pre-
formatted pages, before or after existing pages, by selecting from those available in
each template. For more information about this, see “Expanding the Template by
Adding Pages” on page 31.
In Pages templates, pages contain text and image placeholders, which demonstrate
the look of the finished document. You can replace the placeholder text with your
own text by just typing. You can replace placeholder images by dragging an image to
the placeholder. For more information about working with placeholder text and
images, see “Step 2: Add Text” on page 32, and “Step 5: Save and Share Your
Document” on page 45.
15
Customize the toolbar to
include the tools you use
most often.
Image placeholders
indicate the size and
placement of graphics in a
document template.
The Pages window displays the document you are working in. You can drag graphics
files, movie files, and sound files to the window to add them to your document.
As you work on your document, you may want to zoom in or out to get a better view
of what you are doing.
Layout View
In layout view you can see the outlines of the different text areas of your document,
including headers, footers, fixed text boxes, column widths, and the document body—
the main area of text in the document. With layout view turned on, document rulers
and alignment guides become visible.
To see layout view:
m Choose View > Show Layout.
When you type in the document body, the text automatically flows onto the next
page. Other text areas, such as headers, footers, and text boxes, do not expand onto
subsequent pages; they remain a fixed size and width.
An inline image
Footer
Placeholder Text
Placeholder text indicates where text goes and how it’s formatted in a template. A
new template will contain placeholder text, placeholder images, background images,
or other items that represent elements of the finished document. If you click the
placeholder text, the entire text area is selected. When you begin typing, the
placeholder text disappears and is replaced by what you type.
Image Placeholders
Similar to placeholder text, image placeholders are intended to indicate the size and
placement of graphics in a template. If you click one, selection handles appear. Drag
your own image to the placeholder to replace it.
Master Objects
Some objects appear on every page of a document as the document grows. These
objects are called “master objects.” If you cannot select an object in a template, it’s
probably a master object. To learn more, see “Adding a Repeated Background Image”
on page 101.
Tab
Page break
Column break
Layout break
Section break
You can also use rulers to help place objects precisely on a page, and you can use the
horizontal ruler to set tab stops, page margins, and column widths. For more
information about tab stops, page margins, and columns, see “Setting Tab Stops to
Align Text” on page 58, “Setting Page Margins” on page 92, and “Creating Columns”
on page 92. You can change units of measure that appear on the rulers to inches,
centimeters, points, or picas in Pages Preferences.
You can also turn on rulers without the other layout elements.
To make rulers visible without other layout elements:
m Choose View > Show Rulers, or press Command-R.
To change the ruler values:
m Choose Pages > Preferences, and choose a unit of measure from the Ruler Units pop-
up menu.
Pages Tools
The Toolbar
The Pages toolbar gives you one-click access to many of the actions you’ll use when
creating documents in Pages. As you work in Pages and get to know which
commands you use most often, you can add, remove, and rearrange toolbar buttons
to suit your working style.
If you frequently reconfigure the toolbar, you can add the Customize button to it.
Note: You can restore the default set of toolbar buttons by dragging the default set to
the toolbar. To learn what a button in the Customize dialog does, drag it to the toolbar
and then place the pointer over it until a help tag appears.
Click one of the buttons at the top to display its inspector pane. Clicking the fourth
button from the left, for example, displays the Text Inspector. You can have several
Inspector windows open at the same time.
To open another Inspector window:
m Choose View > New Inspector (or press the Option key while clicking Inspector in the
toolbar).
Shortcuts
You can use the keyboard to perform many of the Pages menu commands and tasks.
A comprehensive list of keyboard shortcuts is available in onscreen help.
To see the list of keyboard shortcuts:
m In Pages, choose Help > Pages Keyboard Shortcuts.
Many commands are also available in shortcut menus that you can access directly
from the object you are working with.
To open a shortcut menu:
m Press the Control key while you click an object.
Shortcut menus are especially useful for working with tables and charts.
You can also export Pages documents back to MS Word, PDF, Rich Text Format
(RTF), or simple HTML. For more information about importing and exporting
Microsoft Word documents, see “Exporting to Other Document Formats” on
page 175.
29
Step 1: Select a Document Type
To start a new Pages document, double-click the Pages icon. In the Template Chooser,
select a template that best suits the type of document you want to create. If you want
to begin in a document without any text or image placeholders, select Blank.
By using a template with text or image placeholders, you can easily create a
professional-looking document, such as a school report, business letter, newsletter, or
brochure, without having to do all the design work. Each template includes preset
styles for titles, headings, tables, footnotes, bullets, and other formatting features.
If you don’t see the Template Chooser when you first open Pages, you can make it
appear by setting a preference in Pages Preferences. You can also set Pages to
automatically open a Blank document or the document template of your choice every
time you open it.
To make the Template Chooser appear, or set the default template for new
documents:
m Choose Pages > Preferences, and then select one of the following:
 To make the Template Chooser always appear when you open Pages, select “For
New Documents: Show Template Chooser dialog.”
Additional
pages: Choose a page
from the Pages pop-up
menu.
The new page is added immediately after the page where you placed the insertion
point.
If you are working with a template that includes text or image placeholders, you can
add text and graphics to the placeholder areas, as described below.
When you type, the placeholder text disappears and is replaced by whatever text you
are typing. The text you type behaves like regular text.
Text Boxes
Some placeholder text is contained in text boxes or table cells to preserve formatting.
When you click placeholder text that’s in a text box, a rectangular, gray border
appears around it.
Usually, text box borders are only visible when the text box or the text inside is
selected, or when you have layout view turned on. To learn how to change the look of
text boxes, see “Creating Callouts, Sidebars, and Highlighted Text” on page 65.
Tables
Some tables contain placeholder text. When you select text that’s inside a table cell, a
yellow rectangle appears around it.
Important: Text boxes and tables that contain placeholder text are part of the
template’s default design. To preserve the design, be careful not to press Delete after
you select the text box or table. Pressing Delete will remove the selected object from
the page. If you accidentally delete a text box or table, you can immediately recover it
by choosing Edit > Undo Delete (or pressing Command-Z). In general, if you make a
mistake or change your mind about something you’ve done, you can immediately
undo your last action by using the Undo command.
Columns
Occasionally, templates may contain placeholder text formatted in columns. It may be
easier to work with text columns if the document layout is visible, but you can also
hide the layout to see how the finished document will appear.
It may also help to see other formatting characters (invisibles) as you work, such as
tabs and paragraph breaks.
To show or hide invisibles:
m Choose View > Show Invisibles or Hide Invisibles.
Images can be cropped, resized, and rotated. They can also be grouped, which makes
it easy to reposition several graphics that you want to keep together. You can also
layer graphics, adjust their opacity, and add shadows to create interesting visual
effects. Fixed images can also be masked (cropped) so that only part of the image is
visible on the page. For more information about working with images, see Chapter 6,
“Working With Graphics and Other Media.” To learn about adjusting shadows and
opacity, see Chapter 7, “Changing Object Properties.”
To learn about adding simple shapes, tables, and charts, see “Adding Simple Shapes,
Tables, and Charts” on page 108.
Pages also displays position tags that indicate the X and Y coordinates of an object’s
top-left corner as you move the object around the page, or the object’s angle as you
rotate it. When you resize an object, size tags appear, displaying the object’s height
and width.
Rulers
You can show rulers to help you position objects on the page. Rulers indicate how far
an object is from the top of the page and the left edge of the page.
To show rulers:
m Choose View > Show Rulers.
To change the units of measure in the rulers:
1 Choose Pages > Preferences.
2 Choose an item from the Ruler Units pop-up menu. To display measurements as a
percentage of the distance across the page, select “Display ruler units as percentage.”
To place the ruler’s horizontal origin point at the center of the page:
m In Pages Preferences, select “Place origin at center of ruler.”
When you change ruler settings in Pages Preferences, the new settings apply to all
documents viewed in Pages, until you change the settings again.
If alignment guides are getting in the way as you work, you can temporarily hide
them.
To temporarily hide alignment guides:
m Hold down the Command key while dragging an object.
You can turn alignment guides and size and position tags on or off in Pages
Preferences. You can also make alignment guides appear only when object edges are
aligned, or only when object centers are aligned.
When you change alignment guide and tag settings in Pages Preferences, the new
settings apply to all documents viewed in Pages, until you change the settings again.
To change the behavior of alignment guides and tags displayed when you move
objects:
1 Choose Pages > Preferences.
2 To turn off size and position tags, deselect “Editing: Show size and position when
moving objects.”
You cannot modify an object that has been locked to its position on the page. To
unlock an object, choose Arrange > Unlock.
If you want to find or replace an entire phrase or other specific cases of a word, you
can use the Advanced pane of the Find & Replace window.
If you frequently use the Find & Replace window, you can add the Find button to the
Pages toolbar to make it available with a single click. To learn about customizing the
toolbar, see “The Toolbar” on page 22.
If you frequently use the Spelling window, you can add the Spelling button to the
Pages toolbar to make it available with a single click. To learn about customizing the
toolbar, see “The Toolbar” on page 22.
To turn the spell-checker off:
m Choose Edit > Spelling > Check Spelling as You Type to deselect it (make sure the
checkmark is not visible next to the menu command).
If you add movies or audio to your document, you can save them as part of your
Pages document so that you don’t have to transfer those files separately.
It’s a good idea to save your document often as you work.
To save your document:
1 Choose File > Save, or press Command-S.
2 Type a name for the document.
3 Click the disclosure triangle to the right of the Save As field.
4 Choose where you want to save the document.
5 If you plan to share the document between computers or with other users, do one or
more of the following:
 Select the “Copy audio and movies into document” checkbox if your document
contains movie or audio files.
If you don’t select this checkbox, then any audio or video files that you have
included in your document will not be carried along with it if you transfer your
document to another computer or send it to someone else. Documents that contain
media may have large file sizes.
 Select the “Copy template images into document” checkbox if you created your
document from a Pages template that contains an image.
If you don’t select this checkbox, then any image files that are part of the template
will not be carried along with your document if you transfer it to another computer
or send it to someone else. Documents that contain media may have large file sizes.
6 Click Save.
To learn about exporting your document in other file formats (including Microsoft
Word, HTML, rich text format, plain text, and PDF), see “Exporting to Other Document
Formats” on page 175.
For more information about printing, see “Printing Your Document” on page 169.
You can also do several of these tasks with a single click using toolbar buttons. You
can add the following buttons to the Pages toolbar:
 Superscript: Click to make selected text superscript.
 Subscript: Click to make selected text subscript.
47
 Smaller: Click repeatedly to make selected text smaller.
 Bigger: Click repeatedly to make selected text larger.
To learn about customizing the toolbar, see “The Toolbar” on page 22.
If you want to change to a different font, or if you frequently change text formatting, it
may be easier to use the Font panel and Text Inspector to format text. These tools are
described in the following sections.
You can also create engaging visual effects with text by changing its shadow color,
opacity, and orientation on the page. To learn more about these options, see
Chapter 7, “Changing Object Properties.”
You can change the appearance of any text in your document by selecting it and then
selecting options in the Font panel. When you make formatting changes in the Font
panel, the selected text changes right away, so you can try different formatting
options and quickly see what looks best.
To change the look and size of text:
1 In the Font panel, select a font style in the Family column and then select the typeface
in the Typeface column.
If you don't see all the font families you know are installed on your computer, select
All Fonts in the Collections column or type the name of the font you are looking for in
the search field at the bottom of the Font panel.
A preview of the selected font appears in the preview pane at the top of the Font
panel. If you don't see a preview pane, choose Show Preview from the Action pop-up
menu in the lower-left corner of the Font panel.
Select a character
category.
Select a symbol.
Double-click a symbol
to insert it in your
document.
4 Click an item in the list on the left to see the characters that are available in each
category.
5 Double-click the character or symbol on the right that you want to insert into your
document, or select the character and click Insert. If the character or symbol has
variations, they appear at the bottom of the window; double-click one to insert it in
your document.
You can also turn on smart quotes in your document, so that beginning and end
quotes are not identical.
To use smart quotes:
m Choose Pages > Preferences, and select the checkbox labeled “Use smart quotes.”
Horizontal alignment
buttons: Click to align
selected text left, right, center,
or to the left and right.
Vertical alignment
buttons: Click to align text to
the top, center, or bottom of a
fixed text box, shape, or table
cell.
Character and line
spacing: Drag to adjust
character, line, and paragraph
spacing for selected text.
You can align text in a fixed text box to the left, right, center, or justified (aligned to
both the right and left edges). Text in a fixed text box, table cell, or shape can also
“grow” from the top, center, or bottom of the text area.
To grow text from the top, center, or bottom of a text box, table cell, or shape:
1 Select the text box, table cell, or shape you want to change.
2 Click the vertical alignment buttons at the top of the Text Inspector.
To adjust the spacing between lines of text in a paragraph:
1 Place the cursor in the paragraph you want to change, or select several paragraphs.
2 In the Text Inspector, drag the Line slider to adjust the line spacing.
Dragging the slider to the left brings the selected lines closer together; dragging it to
the right moves them farther apart. You can also choose Single, Double, or Multiple
from the Line Spacing pop-up menu. Choosing Multiple lets you set line spacing
values between single and double, or greater than double.
To set precise point values for spacing between the lines of text in a paragraph:
1 Place the cursor in the paragraph you want to change, or select multiple paragraphs.
2 In the Text Inspector, choose a standard line spacing (Single, Double, Multiple), or At
Least or Between from the Line Spacing pop-up menu (beneath the Line field).
You can place tab stops where you want them in the document body or in text boxes.
To set a new tab stop:
m Click the horizontal ruler where you want to set the tab stop.
To change the tabs:
1 Select the text you want to adjust.
2 On the horizontal ruler, drag the blue tab icons to change the location of the tab
stops.
You can set off a paragraph by assigning it different indents than the rest of the
document. This is useful, for instance, when including a long quote in your text. You
can do this by setting paragraph indents in the Tabs pane of the Text Inspector, or by
dragging the margin icons in the document ruler.
To set paragraph indents using the Tabs pane of the Text Inspector:
1 Select the paragraph or paragraphs you want to change.
2 Enter a value in the Left field under Paragraph Indents.
3 Enter a value in the Right field under Paragraph Indents.
To change paragraph indents using the rulers:
1 Choose View > Show Rulers.
2 To change the right indent, drag the right indent icon (downward blue triangle on the
right side of the horizontal ruler) to the position where you want the right edge of the
body text to end.
3 To change the left margin, drag the left indent icon (downward blue triangle on the
left side of the ruler) to where you want the left edge of the body text to begin. To
change the left margin independently from the paragraph indent, hold down the
Option key as you drag.
4 To change the first line indent, drag the first line indent (blue rectangle) to where you
want the first line to start. If you want the first line to remain flush with the left
margin, make sure the rectangle aligns with the left indent icon. If you want to create
a hanging indent, drag the rectangle to the left of the left indent icon.
To create ordered lists (outlines), use the Harvard or Legal list styles.
To create an outline:
1 Place the cursor in the first line where you want to begin typing list text.
2 Click List in the toolbar, and then choose Harvard or Legal. You can also choose View >
Show Styles Drawer and select a style. (If you don’t see list styles in the Styles drawer,
click the button in the bottom-right corner of the Styles drawer. For more information,
see “Modifying and Creating New List Styles” on page 83.)
3 To indent text to the next list indentation level, choose Format > Text > Increase List
Indent Level (or click the right Indent Level arrow button in the List tab of the Text
Inspector).
You can also use table cells to hold callouts. To read about working with tables, see
Chapter 8, “Creating Tables.”
Text boxes are created as “fixed” text boxes, which means they are anchored to a
position on the page. Body text on the page will flow around them.
To add a fixed text box:
1 Click anywhere outside the text areas of your document so that the insertion point is
not visible.
2 Choose Insert > Text (or click Objects in the toolbar, and then select Text). A text box
appears on the page.
3 Press Command-Return to select the text box, and then drag it to position it where
you want on the page.
4 Click inside the text box to place the insertion point and type to enter text. The text
box does not grow automatically if you enter too much text.
5 Drag the selection handles to resize the text box and reveal any hidden text. (Or you
can create linked text boxes so that the overflow text flows continuously into another
text box. To read about linked text boxes, see “Linked Text Boxes” next.)
Note: To lock the text box to the page so it doesn’t accidentally get moved as you
work, choose Arrange > Lock.
To learn about changing the spacing between the text and the inside of the text box,
see “Formatting a Text Box or Shape” on page 69. To learn about changing the look of
a text box, see “Formatting a Text Box or Shape” on page 69.
A clipping indicator
shows the text extends
beyond the text box.
3 Click the blue square on the right side of the box to create a linked text box.
4 Drag the text boxes to reposition them. The flow of the text inside the boxes always
follows the order in which the boxes were created, regardless of where you position
them in the document.
To move linked text boxes:
1 Select all of them, then choose Edit > Copy.
2 Select the destination point and choose Edit > Paste.
Note: If you copy and paste a single linked box, you will create a single unlinked text
box, identical to the one you copied.
To select only the text in all the linked text boxes:
m Select text in the first box, and then press Command-A.
4 Click the Fill color well and select a color in the Colors window (for information about
the Colors window, see “Using Color and Image Fills” on page 127).
3 To resize the shape, select it and drag the selection handles. (If the insertion point is
inside the shape, press Command-Return to get out of text editing mode and select
the shape.)
You can format the text within a shape, but you cannot link shapes.
Use the Wrap Inspector to set how you want the text on the page to wrap around a
text box or shape. For more information about setting text wrapping around an
object, see “Wrapping Text Around an Object” on page 118.
You can format text boxes or rectangles in columns by selecting the text box or
rectangle and choosing the number of columns you want, just as you would format
columns in the document body. For more information about creating and formatting
columns, see “Creating Columns” on page 92. You can also place shapes, images, and
charts inside text boxes and shapes, and you can add tables inside text boxes. Objects
added inside text boxes and shapes can only be added as inline objects. To read
about adding in line objects, see “Working With Graphics” on page 105.
You can change the amount of space between text and the inside border of the text
box, shape, or table cell. This measurement is called the inset margin. The amount of
space you specify is applied equally around the text on all sides.
To set the spacing between text and the inside of a text box, shape, or table cell:
1 Select the text box, shape, or table cell. (If the insertion point is inside the object,
Command-Return to get out of text editing mode and select the object.)
2 Choose View > Show Inspector (or click Inspector in the toolbar), click the Text
Inspector button, and then click Text.
3 In the Text pane of the Text Inspector, drag the Inset Margin slider to the right to
increase the space between text and the inside border of the object, or type a
number in the Inset Margin box and press Return.
The simplest way to make sure that text styles are consistently used is to create styles,
which you can then apply to any text as you work. Templates include a variety of
styles that are suited to the type of document you are working in. The style names,
such as “Heading,” “Body,” or “Caption,” suggest where the style should be used. If you
are using a template, you can apply the preset styles where you need them.
71
When you import a document from Microsoft Word, any styles it contains are
imported into the Pages document and can then be used like any other styles created
within Pages.
You can add the Character button to the toolbar to make it possible to add or change
character styles from the Pages toolbar. To learn about customizing the toolbar, see
“The Toolbar” on page 22.
To apply a style to a paragraph:
m Select the paragraph or paragraphs you want to change, or select an entire text box
or shape that contains text. Then do one of the following:
 Click the Style button in the toolbar and choose the style you want to apply.
 Choose View > Show Styles Drawer to open the Styles drawer (or click Style in the
toolbar and choose Show Styles Drawer). In the Styles drawer, select the style you
want to apply.
You can add the Character button to the toolbar and use it to quickly change
character styles. To learn about customizing the toolbar, see “The Toolbar” on page 22.
To apply a list style:
1 Place the cursor wherever you want to begin typing your list, and then do one of the
following:
 Click the List button in the toolbar and choose the style you want to apply.
 Choose View > Show Styles Drawer to open the Styles drawer (or click Style in the
toolbar and choose Show Styles Drawer). In the Styles drawer, select the list style
you want to apply. If you don’t see the list styles, click the button in the bottom-
right corner.
2 Type your list, pressing Return to begin each new bulleted or numbered point.
If an imported style has the same name as a style in the open document and you do
not select the “Replace duplicates” checkbox, a number is appended to the name of
the imported style. For example, if you copy a style called “Body” to a document that
already contains a “Body” style, the imported style will be named “Body 2.”
Style Overrides
When you make changes to individual text attributes—for example, using the font
command in the Format menu to apply italics to a paragraph of text formatted with
Body style—without selecting a new style, you have created a style override. That is,
the text remains formatted in its original style (Body), but you have applied changes
(italics) on top of the default style attributes. When you select text to which you have
applied style overrides, the arrow next to the style name in the Styles drawer is red.
(The arrow next to a paragraph style name also appears red if you have selected text
with a character or list style applied.)
Overrides can occur when you change the font, typeface, size, or color of text, or
apply the text formatting options in the Text submenu of the Format menu, in the
Font panel, or in the Text Inspector.
If you apply style overrides to some text and then change your mind, you can easily
return the text to the default attributes of the paragraph style.
To remove style overrides:
1 Choose View > Show Styles Drawer (or click Style in the toolbar and choose Show
Styles Drawer).
2 Select the text you want to change.
3 In the Styles drawer, click the arrow to the right of the selected style and choose
Revert to Original Style (or double-click the style name). The selected text takes on the
default attributes of the selected style.
You can also modify a text style by copying the style from one instance of text, and
pasting it to some other text. This works for paragraph styles and character styles.
To copy and paste a paragraph or character style:
1 Place the insertion point in a paragraph or word whose style you want to copy, and
then choose Format > Copy Paragraph Style or Copy Character Style.
2 Place the insertion point in a paragraph or word you want to modify, and then choose
Format > Paste Paragraph Style or Paste Character Style.
The text takes on the new style, but its content is not altered.
If you frequently copy and paste styles, you can add the Copy Style and Paste Style
buttons to the toolbar. To learn about customizing the toolbar, see “The Toolbar” on
page 22.
If you don’t find a paragraph style with exactly the look you want in the Pages
templates, you can modify an existing style, or create a new style.
6 Click More in the Text Inspector to select more formatting options, as described
below:
Styles you modify or create are available only in the document you’re working in. They
can be imported into other documents or templates. To learn how, see page 74.
2 Type some text and select a font typeface and size. For more information, see “Using
the Font Panel to Format Text” on page 48.
3 Set the text color. For information about changing the color of text, see “Setting Text
Color in the Text Inspector” on page 57.
4 Set the character spacing. For more information about setting character spacing, see
“Setting Text Alignment and Spacing” on page 54.
5 Set the baseline shift, ligature, and language in the More pane of the Text Inspector.
For more information, see “Modifying and Creating New Paragraph Styles” on page 76.
6 In the Styles drawer, click the arrow to the right of the character style name, and select
one of the following:
a Redefine Style From Selection: Redefines the existing character style for the whole
document.
If you choose this, your formatting changes will apply to all other instances of this
style throughout the document.
b Create New Character Style From Selection: This doesn’t alter the existing style,
but creates a new style based on the formatting choices in the previous steps.
If you select this, you can choose which attributes you want to include as part of the
new character style. Click the disclosure triangle below the Name field in the “New
character style” dialog, and then select the attributes you want. Type a name for the
new style, and then click OK.
Use the List pane of the Text Inspector to modify or create new list styles. The
Inspector allows you to choose different bullets or numbering styles (for example,
Arabic numerals versus Roman numerals). For bullets, you can choose from a variety
of text symbols or images supplied by Pages, or you can use an image of your own, or
have no visible bullet at all.
To open the List pane of the Text Inspector:
1 Choose View > Show Inspector (or click the Inspector button in the toolbar).
2 Click the Text Inspector button, and then click List.
Choose bullets or
numbering.
Adjust bullet size and
position relative to text.
Adjust bullet indentation
relative to the first
paragraph indent.
2 Choose one of the following bullet or numbering styles from the Bullets & Numbering
pop-up menu in the List pane of the Text Inspector:
 No Bullet: Choose this if you don’t want visible bullets, but you want to be able to
specify the amount of indentation for levels in an ordered list.
 Text Bullet: Choose this to use a text character as the bullet. You can select one
from the list or type your own characters in the text field. Some fonts provide
symbols that can be used as interesting bullets. To use them, open the Character
Palette (choose Format > Font > Show Fonts, then choose Characters from the
Action pop-up menu). Select the bullet symbol in the Text Inspector, and then
double-click the symbol of your choice in the Character Palette. Then press the
Return key.
 Image Bullet: Choose this to use one of the available image bullets provided by
Pages, and then select one in the list.
 Custom Image: Choose this to use your own image as a bullet. Use the Open dialog
to locate and select the image file you want to use. (To change the image, click
Choose or drag a new image into the well.)
 Number: Choose this to create a numbered list. You must also choose a numbering
style. You can choose Arabic or Roman numerals, or letters.
Restart numbering, or
continue with previous
numbering.
Adjust number indentation
relative to page margin.
 Tiered Numbers: To read about Tiered Numbers, see “To modify a tiered list style
for ordered lists:” on page 86.
3 Format the bullets.
a To increase or reduce the size of a bullet, type a number in the Size field. Selecting
the “Scale with text” checkbox maintains the image-to-text size ratio of the bullets
even if you later change to the font size.
b To position the bullet symbol higher or lower relative to the text, type a number in
the Align box (or click the arrows).
c To set how far the bullets are indented from the margin, type a number in the Bullet
Indent field. A higher number indents the list further to the right.
d To set how far text is indented from the bullet, type a number in the Text Indent
field. A higher number indents the text further to the right.
5 Click the red arrow to the right of the selected style in the Styles drawer and choose
one of the following:
a Redefine Style From Selection: Redefines the existing list style for the entire
document.
If you choose this, your formatting changes will apply to all other instances of this
style throughout the document.
b Create New List Style From Selection: This doesn’t alter the existing style, but
creates a new style based on your formatting choices.
If you select this, type a name for the new style, and then click OK.
To modify a tiered list style for ordered lists:
1 Choose View > Show Styles Drawer (or click Style in the toolbar and choose Show
Styles Drawer), and select the ordered list (outline) style that best matches the one
you want to design. (Be sure the insertion point is visible on the page in order to
select a list style.)
2 Choose Tiered Numbers from the Bullets & Numbering pop-up menu in the List pane
of the Text Inspector.
3 Choose the numbering or lettering style that you want from the second pop-up
menu.
4 Click the right indent level arrow to advance to the second list indent level.
5 Choose the numbering or lettering style that you want for the second list indent level.
6 Repeat steps 4 and 5 until you have set numbering or lettering styles for up to nine
list indent levels.
7 Choose View > Show Styles Drawer (or click Style in the toolbar and choose Show
Styles Drawer).
Notice that one of the list styles is highlighted. This is the style that has been applied
to the selected text. (If the list styles are not visible, click the button in the bottom-
right of the Styles drawer.) The arrow to the right of the style name is red, indicating
that you have applied overrides to the style by modifying it.
8 Click the red arrow to the right of the list style name, and choose one of the following:
a Redefine Style From Selection: Redefines the existing list style for the entire
document.
If you choose this, your formatting changes will apply to all other instances of this
style throughout the document.
b Create New List Style From Selection: This doesn’t alter the existing style, but
creates a new style based on your formatting choices in the previous steps.
If you choose this, type a name for the new style, and then click OK.
89
The Document Inspector button
Use the TOC pane to set up
a table of contents for the
document. (See page 102.)
Use the Info pane to see
document statistics, such as
word count, date, and
keywords.
Use the Page Setup dialog
to specify paper size and
orientation.
Set up margins for the left,
right, top, and bottom
edges of the page. You can
set them separately for
documents with left- and
right-facing pages.
Choose a footnote style.
Formatting set in the Document Inspector applies to the entire document. If you
divide your document into sections (for example, chapters), you can apply different
formatting to different sections. You can also create a different first page, left page,
and right page layout for each section, or use different text column layouts in different
parts of the document. These settings are made in the Layout Inspector. To learn more
about creating sections in your document, see “Varying Document Formatting Using
Section Breaks” on page 99. To read about creating columns, see “Creating Columns”
on page 92.
Portrait orientation
(default for most
templates)
Landscape orientation
with the top of the page
on the left side of the
paper
Landscape orientation
with the top of the page
on the right side of the
paper
3 Choose a paper size from the Paper Size pop-up menu. If the paper size you want isn’t
available in the Paper Size pop-up menu, do the following:
a Choose Custom Paper Size from the Settings pop-up menu.
b Click New and type a name for the new paper size.
c Specify the paper’s height and width in the Paper Size fields, and specify the
printable area margins you want to use in the Printer Margins fields.
d Click Save.
e Choose Page Attributes from the Settings pop-up menu.
f Choose the new paper size you named from the Paper Size pop-up menu, and then
click OK. It will be near the bottom of the list.
Creating Columns
In Pages, you can vary the design on different pages of your document by creating
layouts, separated by layout breaks. A layout is part of a document in which you have
defined layout margins and columns. You can have multiple layouts in a section of
your document, or even on a single page.
You can lay out text in up to ten columns, adjusting relative column size and the
spacing between columns.
To create one to four columns of equal width:
m Click Columns in the toolbar and select the number of columns you want, up to four.
If the Columns button isn’t in the toolbar, or if you want more than four columns, you
must use the Layout Inspector. You must also use the Layout Inspector if you want to
make columns with unequal widths.
Once you have created the number of columns you want, you can resize them on the
fly using the document rulers, rather than entering column and gutter width values in
the Layout Inspector.
Using column breaks or layout breaks does not affect the headers, footers, page
numbering, or other formatting features specific to the document or section. (To read
about section formatting features, see “Varying Document Formatting Using Section
Breaks” on page 99.)
You can apply the formatting features described here to both single-column layouts
and multi-column layouts.
To create a column break:
1 Place the cursor after the word where you want to end the text flow.
2 Choose Insert > Column Break.
The text breaks where your cursor was inserted and continues in the next text
column. If you insert a column break in a single-column layout, the text continues at
the top of the next page.
When you show invisible formatting characters in your document, a column break
symbol appears like this:
3 Set the number of columns you want, and format them, in the Layout pane of the
Layout Inspector.
To change the layout margins of columns:
1 Choose View > Show Inspector (or click Inspector in the toolbar) and then click the
Layout Inspector button.
2 Click Layout in the Layout Inspector.
3 To change the outside margins of the column layout, enter values in the Left and
Right fields under Layout Margins.
4 To create space above and below the current column layout, enter values in the
Before and After fields under Layout Margins.
Note: The new margins cannot extend outside the page margins set for the
document.
To move a layout to the top of a page:
m Select the checkbox labeled “Layout starts on new page” in the Layout pane of the
Layout Inspector.
To learn about other document formatting options that are available by using facing
pages, see “Varying Document Formatting Using Section Breaks” on page 99.
Using Formatted Text Fields for the Page Numbers, Date, and
Time
Formatted text fields allow you to insert text that can be automatically updated. For
instance, inserting the date field shows the current date whenever you open the
document. Similarly, page number fields keep track of page numbers as you add or
delete pages. Pages provides formatted text fields for date, page number, and page
count—the total number of pages in the document. This is useful, for example, if you
want to label your pages “page 1 of 4.”
To add page numbers:
m Place the insertion point where you want the page number to appear, and then
choose Insert > Page Number.
To add the page count:
m Place the insertion point where you want the page count to appear, and then choose
Insert > Page Count.
To add and format the date and time:
1 Place the insertion point where you want the date and time to appear, and then
choose Insert > Date & Time.
2 Select a date and time format in the dialog.
Adding Footnotes
When you mark items to be footnoted, Pages automatically generates and formats
footnotes that appear at the bottom of the page. You can choose Arabic (1, 2, 3) or
Roman (i, ii, iii) numeral styles. You can also number footnotes continuously through
the document, or restart numbering for each document section or page.
To add a footnote:
1 Place the insertion point at the end of the word where you want the footnote number
to appear.
2 Choose Insert > Footnote.
A footnote number appears and the insertion point moves to the corresponding
footnote field at the bottom of the page.
3 Type the footnote information.
You can format footnote text and footnote numbers independently of each other.
However, whichever footnote style you choose (Arabic or Roman numerals), it will be
the same throughout the document.
To select Arabic or Roman numerals for all footnotes:
1 Choose View > Show Inspector (or click Inspector in the toolbar), and then click the
Document Inspector button. Then click Document.
2 Choose “1,2,3” or “i, ii, ii” from the Format pop-up menu.
To restart footnote numbering:
m Choose Restart Each Page or Restart Each Section from the Numbering pop-up in the
Document pane of the Document Inspector. (To learn about dividing your document
into sections, see “Varying Document Formatting Using Section Breaks” on page 99.)
When you insert a section break, the new document section automatically “inherits”
all of the formatting and layout attributes of the previous section. To change these
attributes, use the Layout Inspector to set up new page numbering, headers and
footers, and margins.
Once you create a section break, changes made to the master objects, headers,
footers, or page numbering, will apply only to the section in which you make the
changes.
To make headers and footers different in one section of a document:
1 Place the insertion point in the document section you want to change.
2 Choose View > Show Inspector (or click Inspector in the toolbar), and then click the
Layout Inspector button.
To set up different first pages, or left- and right-facing pages, for a document
section:
1 To make the headers and footers on the first page unique, select the checkbox
labeled “First page is different” in the Section pane of the Layout Inspector, and then
change headers and footers.
2 To put different headers and footers on alternate pages, do the following:
a Select the checkbox labeled “Left and right pages are different” in the Section pane
of the Layout Inspector.
b If you want the first page of the section to always start on the left- or right-facing
page, choose Left Page or Right Page from the “Section starts on” pop-up menu.
Otherwise, choose Any Page.
Important: Master objects may not appear on every page, depending on whether
your document is divided into sections and which settings you have selected in the
Section pane of the Layout Inspector. If you want to have different master objects for
different parts of your document, you can divide your document into sections.
To add a master object:
1 Click outside the text flow of your document so that the insertion point is not visible.
2 Add a graphic object. You can add an imported image, drawn shape, table, chart, or
text box. To learn about how to add a graphic, see Chapter 6, “Working With Graphics
and Other Media.” Be sure the graphic is a “fixed object” (is not placed in line with the
text flow).
3 Position the graphic wherever you want it on the page.
4 Choose Format > Advanced > Move Object to Section Master. The selection handles
disappear from the object, so you can no longer select it.
To edit or move a master object, you must first make master objects selectable for the
entire document. Master objects look different from other objects because they have
blue selection handles.
Note: If the styles you select are not used anywhere in the document, you will see a
message that your table of contents is empty when you create the table of contents. If
you select styles that are used for a large amount of text in the document, your table
of contents will be too full. Take care to select the styles that denote topic headings,
captions, or other items you want listed in a table of contents.
4 In the #’s column, select the checkboxes of those styles whose entries you want to
have an associated page number.
In addition, Pages provides the tools to create basic shapes like triangles, rectangles,
and arrows, as well as versatile tables and charts. For more information about placing
simple shapes, tables, and charts, see “Adding Simple Shapes, Tables, and Charts” on
page 108.
105
About Inline Objects
Inline objects are embedded in the text flow. If you type more text above them,
they are pushed along as the text grows. The selection handles on the top of inline
objects are inactive. You cannot drag these handles to resize the object; you can
only resize it by dragging the active handles.
For inline objects, an anchor icon is also visible within the object’s container when
it’s selected.
Anchor icon
If you are placing a graphic or shape inside of another shape, text box, or table cell,
it can only be placed in line with the text. Inline images are automatically resized to
fit within the layout margins of the document. To move an inline object to a
different position within the text, select it and drag it until you see the insertion
point appear where you want to drop it.
You can convert objects from inline to fixed, and vice versa. To learn how, see
“Converting Between Fixed and Inline Objects” on page 110.
Text wraps differently around fixed and inline objects. To learn about text wrapping,
see “Wrapping Text Around an Object” on page 118.
m Place the insertion point wherever you want the image to appear, choose Insert >
Choose, and then select the file and click Insert.
To add an imported file as a fixed object, do one of the following:
m Drag the file from the Finder or Media Browser to the document window to bring it
into the document, staying outside of the main body text area. Then drag the file to
position it where you want it.
m Click outside the text areas in the document so that no insertion point is visible, and
then choose Insert > Choose. Select the file and click Insert.
Imported images can be resized and rotated to change their appearance on a page.
Fixed images can also be cropped (masked). You can also layer graphics, adjust their
opacity, and add shadows to create interesting visual effects. For more information
about working with graphics, see the relevant sections in this chapter. To learn about
adjusting shadow properties and opacity, see Chapter 7, “Changing Object Properties.”
You can modify the colors, opacity, outline, and shadows of shapes and text boxes
using the Graphic Inspector. For more information about setting a shape’s attributes,
see Chapter 7, “Changing Object Properties.” To learn about adding text inside a shape,
see “Putting Text Inside a Shape” on page 68.
You can change the number of rows and columns in a table, and change the table’s
design and formatting, using the Table Inspector. For more information about
designing tables, see Chapter 8, “Creating Tables.”
To change the way text wraps around the object, use the wrap controls in the Wrap
Inspector. For more information about text wrapping, see “Wrapping Text Around an
Object” on page 118.
PDF files also provide a great way to move tabular data from Excel or AppleWorks
documents into Pages. If you have extensively formatted tables in Excel or an
AppleWorks spreadsheet that you want to display in your document, you can save the
spreadsheet as a PDF file and then place that PDF file on a page as you would any
other external graphic file.
To convert an Excel or AppleWorks file to a PDF file:
1 In your Excel or AppleWorks spreadsheet, select the table range you want to display in
your document.
2 Choose File > Print.
3 Drag the window to center it over the part of the image you want to feature. Drag its
selection handles to resize it.
 To constrain the window’s proportions, hold down the Shift key as you drag the
selection handles.
 To rotate the window, hold down the Command key as you drag the selection
handles. (To learn more about manipulating objects using the selection handles, see
“Selecting, Dragging, and Resizing Objects” on page 115.)
4 Double-click the window to make the masked area invisible. The masked image has a
dotted line around its visible borders.
5 Drag the selection handles to resize or rotate the visible portion of the image, or drag
the entire image to reposition it on the page. The visible part of the image can also be
converted to an inline image by selecting “Moves with text” in the Wrap Inspector (see
“Adding Fixed and Inline Objects” on page 107 for more information).
If you frequently mask images, you can add the Mask button to the toolbar to work
more efficiently. To learn about customizing the toolbar, see “The Toolbar” on page 22.
If you frequently layer objects on the page, you can add the Front, Back, Forward, and
Backward buttons to the toolbar to work more efficiently. To learn about customizing
the toolbar, see “The Toolbar” on page 22.
To select a fixed object that’s behind text:
m Place the pointer outside the text area and drag across the page until the object’s
selection handles appear.
Note: If clicking an object doesn’t select it, or if it has blue selection handles, it’s a
master object. To read about master objects, see “Placing Master Objects” on
page 178.
To select all objects in a document:
 To select all the fixed objects in a document (excluding objects on the section
master), click outside the text area and press Command-A.
 To select all inline objects and text in a text area, place the insertion point in the text
area and press Command-A.
After you group or lock objects, you can’t edit the individual objects in the group until
you ungroup or unlock them.
To ungroup a grouped object:
m Select the object and choose Arrange > Ungroup.
To lock objects:
1 Hold down the Command (or Shift) key as you select the objects you want to lock.
2 Choose Arrange > Lock.
To unlock an object:
m Select the object and choose Arrange > Unlock.
If you frequently group and lock objects on the page, you can add the Group,
Ungroup, Lock, and Unlock buttons to the toolbar. To learn about customizing the
toolbar, see “The Toolbar” on page 22.
When you bring an alpha-channel image into Pages, there’s nothing else you have to
do to make the transparency work. Just place it, manipulate it, and move it to the
back or front as you would any other image.
Many PDF, TIFF, and PSD files contain alpha-channel graphics. You can create your own
alpha-channel images using applications such as Adobe Photoshop, Corel Draw,
Adobe Illustrator, and Adobe Acrobat. See the instructions that come with the
application to learn how to create alpha-channel images.
The settings in the Wrap Inspector affect fixed objects and inline objects differently.
To adjust text wrapping around a fixed object:
1 Select the object.
2 Select the checkbox labeled “Object causes wrap” in the Wrap Inspector.
4 To make the text wrap more tightly around an object with an alpha channel, click the
right Text Fit button. To make it wrap more loosely, click the left Text Fit button.
5 Enter a value in the Extra Space field to specify the minimum space you want to leave
between the object and the surrounding text.
6 If the object has transparent areas (an alpha channel), set the alpha-channel
percentage at which you want the text to appear through the transparency (for an
illustration, see “Working With Alpha-Channel Graphics” on page 118).
Object is centered
between lines of text.
4 To make the text wrap more tightly around an object with an alpha channel, click the
right Text Fit button. To make it wrap more loosely, click the left Text Fit button.
5 Enter a value in the Extra Space field to specify the minimum space you want to leave
between the object and the surrounding text.
6 If the object has transparent areas (an alpha channel), set the alpha-channel
percentage at which you want the text to appear through the transparency (for an
illustration, see “Working With Alpha-Channel Graphics” on page 118).
Pages accepts any QuickTime or iTunes file type, including the following:
 MOV
 FLASH
 MP3
 MP4
 AIFF
 AAC
Important: When you add a media file to a document, the file does not become part
of the Pages document. If you transfer your document to another computer without
also transferring the media file, it won’t appear in the document. Be sure to transfer all
media files to the computer or server from which the document will be viewed, or
include them when saving your document. (In the Save dialog, click the disclosure
triangle to the right of the Save field, and then select the checkbox labeled “Copy
audio and movies into document.”)
You can also specify which frame of the movie to display on the page (called the
“poster frame”) until the movie starts playing.
To set the movie poster frame:
1 Click the movie to select it.
2 In the QuickTime Inspector, drag the Poster Frame slider until the movie displays the
image you want.
Pages detects URLs and email addresses automatically as you type, and converts them
into hyperlinks. You can disable this feature if you want to.
To turn off automatic detection of URLs and email addresses as you type:
m Choose Pages > Preferences, and select the checkbox labeled “Automatically detect
email and web addresses”.
To add bookmarks to your document:
1 Select the text where you want to create the bookmark.
2 Choose Insert > Bookmark.
Click a bookmark to
jump to it in the
document; double-click it
to edit its name.
Click Add or Delete to
add new bookmarks or
delete a bookmark
selected in the list.
5 Choose the bookmark you want to link to from the Name pop-up menu.
To disable hypertext for editing:
m Select the checkbox labeled “Make all hyperlinks inactive” in the Hyperlink pane of the
Link Inspector.
You can also adjust an object’s opacity (transparency). You can even use fill and
opacity effects to modify individual bars or pie wedges in charts.
Selecting Colors
You use the Colors window to select color for text, shapes, backgrounds, and shadows
in Pages.
To open the Colors window:
 Choose View > Show Colors (or click Colors in the toolbar).
 Or click a color well in one of the inspector panes.
127
Click the magnifying glass
icon and then click any item
on the screen to match its
color.
You can use the color wheel in the Colors window to select colors. The color you
select appears in the box at the top of the Colors window. You can save that color for
future use by placing it in the color palette.
To select a color:
1 Click anywhere in the color wheel. The selected color is displayed in the color box at
the top of the Colors window.
2 To make the color lighter or darker, drag the slider on the right side of the Colors
window.
3 To make the color more transparent, drag the Opacity slider to the left or enter a
percentage value in the Opacity field.
To open the color palette:
m Drag the handle at the bottom of the Colors window.
To apply the colors you select in the Colors window to an object on the page, you
must place the color in the appropriate color well in an inspector pane.
To apply a color to an object on the page:
 Select a color well in one of the inspector panes and then click a color in the color
wheel.
 Or drag a color from the color palette or color box to a color well in one of the
inspector panes.
To match the color of another item on the screen:
1 Click the magnifying glass to the left of the color box in the Colors window.
2 Click the item on the screen whose color you want to match. The color appears in the
color box.
3 Select the item you want to color in the document window, and drag the color from
the color box to the item.
A tinted image fill places a transparent, colored mask over the fill image.
To set a tinted image fill for an object:
1 Select the object in which you want to place an image.
2 In the Graphic Inspector, choose Tinted Image Fill from the Fill pop-up menu, and
select an image.
3 Click the color well next to the Choose button, and then select a tint color in the
Colors window. Drag the Opacity slider in the Colors window to make the tint darker
or lighter. (If you drag the Opacity slider in the Graphic Inspector, it will change the
opacity of both the tint and the image.)
4 Choose the image scale from the pop-up menu, as described above.
5 To change the image, click Choose, select the image, and click Open (or drag the
image file from the Finder or Media Browser to the image well in the Graphic
Inspector).
3 To change the line thickness, type a value in the Stroke field (or click the arrows).
4 To change the line color, click the color well and select a color.
5 To give the line end points, such as arrowheads or circles, choose left and right end
points from the pop-up menus.
Note: The Insert menu and the Shapes pop-up menu (in the toolbar) include lines
with arrowheads.
You can set the position of lines and objects in the Metrics Inspector. See “Adjusting
Size and Position of Objects” on page 137.
Adding Shadows
Shadows give your page an appearance of depth. An object’s shadow appears on any
object behind it. You can create a variety of shadow effects, or remove the shadow
from an object.
Adjusting Opacity
You can create interesting effects by making objects more opaque or less opaque.
When you put a low-opacity object on top of another object, for example, the bottom
object shows through the top object. Depending on how high or low you set the
opacity, the objects beneath can be highly visible, partly obscured, or completely
blocked from view (at 100-percent opacity). You can change opacity settings for any
visual object on the page, including drawn shapes, pictures and other image files, and
movies. Set object opacity using the Graphic Inspector.
To change an object’s opacity:
1 Select the object.
2 In the Graphic Inspector, drag the Opacity slider.
The specified coordinates determine the position of the upper-left corner of the
object’s container box.
 The X value is measured from the left edge of the page.
 The Y value is measured from the top edge of the page.
If an object is rotated, the X and Y coordinates specify the upper-left corner of the
rotated container box.
Lines
For lines, size and position can only be adjusted in the Metrics Inspector if the lines
are fixed objects, not placed in line with text. (To read more about fixed objects versus
inline objects, see “Fixed Objects Versus Inline Objects” on page 105.)
When you enter X and Y coordinate values for line position in the Metrics Inspector,
the Start coordinates correspond to the end point of the line that’s on the upper left
side at the time the line first appears on the page. Even if you later flip or rotate the
line, the Start coordinates always correspond to the same end point of the line.
139
This layout, featured in
the Photo Journal
template, was made by
filling some table cells
with images, and others
with colors and text.
Adding a Table
Tables can be added in line with text or fixed on the page. (To learn about fixed and
inline objects, see “Fixed Objects Versus Inline Objects” on page 105.) Fixed tables
cannot span page boundaries, but inline tables can.
To add a table in line with text:
1 Place the insertion point wherever you want the table to appear in the text flow.
2 Choose Insert > Table (or click Objects in the toolbar and choose Table). The Table
Inspector opens.
3 To resize the table, drag the available selection handles.
To place a fixed table:
1 Click anywhere outside the text areas of the document so that no insertion point is
visible.
2 Choose Insert > Table (or click Objects in the toolbar and click Table). A table appears
on the page.
3 Drag the object to wherever you want it to appear on the page.
You can apply changes to an entire table at once (by selecting it) or to individual cells.
To place text or graphics inside table cells or groups of cells, you select only the cells
you want to work with. You can select table cells and borders using the following
shortcuts, or by using the selection buttons in the Table Inspector. To read about the
Table Inspector, see “Formatting Tables” on page 144.
To select the entire table, do one of the following:
 Click the table.
Formatting Tables
You can design tables in a variety of creative ways simply by changing the thickness
and color of cell borders, selectively removing cell borders, or merging and splitting
cells to create useful asymmetries within the table.
If a table spans multiple pages, columns, or text boxes, editing the text or changing
the look of the header row or column in one place changes it consistently throughout
the table.
To add a header row or column:
1 Select the table.
2 Choose Format > Table > Add Header Row or Add Header Column, or in the Table
Inspector, select the checkboxes labeled Header Row or Header Column.
Splitting cells divides each selected cell into two equal parts, horizontally (rows) or
vertically (columns). Both of the new cells have identical background colors or images.
Any text that was in the original cell remains in the top-most or left-most cell.
You can split and merge cells using menu commands, shortcut menus, or the Table
Inspector. To resize table cells, use the Table Inspector.
To merge table cells:
1 Select a group of two or more adjacent table cells. The group of cells you choose must
form a rectangle.
2 Choose Format > Table > Merge Cells.
You can also merge cells by clicking Merge Cells in the Table Inspector.
You can also split cells into rows or columns by clicking Split Rows or Split Columns in
the Table Inspector. You can repeat the split operation to create smaller and smaller
units within a table cell. To rejoin split cells, select them and choose Format > Table >
Merge Cells.
To resize table cells:
 Select the cells and enter values in the Column Width and Column Height fields of
the Table Inspector, and then press Return.
 Select cell borders and drag to resize.
To make all table cells the same size:
m Select the table and choose Format > Table > Distribute Rows Evenly and Distribute
Columns Evenly.
If there is too much text in a table cell, a clipping indicator appears at the bottom of
the cell.
To avoid clipping, you can drag the cell borders to resize them, or drag a selection
handle to resize the entire table. You can also make table rows automatically shrink or
expand in height to accommodate the text inside them.
To make table rows automatically grow or shrink to fit their contents:
m Select the table, and then select the checkbox labeled “Automatically resize to fit
content” in the Table Inspector.
You can specify the amount of space between text and its cell border using the Inset
Margin slider or field. The amount you specify is applied equally around the text on all
four sides.
To adjust the space around text within a table cell:
1 Click the cell (or select the whole table to apply the same setting to all cells).
2 In the Text pane of the Text Inspector, drag the Inset Margin slider to the right to
increase the space, or enter a value in the field and press Return.
About Charts
Charts show the relationship of two types of data with respect to each other. For
example, if you chart business growth over time, you are showing the relationship
between the size of the business versus the passage of years. If you chart voting
results among different demographic groups, you are showing the relationship
between the number of people who voted a certain way versus their demographic
affiliation. When you enter data for a chart, the two different types of data are
represented as data series and data sets.
In a business chart, an example of a data series could be one region’s profits over four
successive years; the data sets could be all of the regions’ profits for only one of those
years. In the illustration below, the data series (each region’s profits) are in rows, and
the data sets (each year’s profits) are in columns. Each individual value (for example,
17 for Region 1, 2004) is a data point.
153
These squares indicate
which color represents
each data series.
The colored squares next to the row labels (Region 1 and Region 2) show which color
represents each data series in the chart.
The illustration below shows how this data looks as a column chart.
In this chart, the data series are represented by rows in the Chart Data Editor. The data
points are represented as a series of dark-colored bars and a series of light-colored
bars.
The illustration below shows the same data, but with the data sets and data series
transposed.
For this chart, the data series are represented by columns in the Chart Data Editor
pictured earlier. There are now four data series represented as four different-colored
bars.
Data series are represented differently in the different kinds of charts provided by
Pages.
 In column charts and bar charts, a data series is represented by a series of bars in
the same color (as shown above).
 In a line chart (also called a graph), a data series is represented by a single line.
 In an area chart, a data series is represented by an area shape.
 In a pie chart, only a single data set—the first data point in each series—is
represented on the chart (whichever is listed first in the Chart Data Editor).
To copy data from another spreadsheet into the Chart Data Editor:
1 Open the spreadsheet with the data you want, and select all the relevant cells.
2 Choose Edit > Copy (or press Command-C).
3 Select the top cell in the first column of the Chart Data Editor.
4 Choose Edit > Paste (or press Command-V).
To edit the names of rows and columns, or the data in a cell:
m Double-click a cell or a row or column label and type.
To reorder rows or columns in the Chart Data Editor:
m Drag a row or column label and to a new position.
To add rows or columns in the Chart Data Editor, do one of the following:
 Click Add Row or Add Column to place a row above the selected row or a column to
the left of the selected column. If no row or column is selected, the new row or
column appears at the bottom or right edge of the table. (To see the new row or
column, you may have to press the Return key or the Tab key, or expand the Chart
Data Editor window.)
 Select any blank cell, type your data, and press Return. A new row or column is
automatically created.
To delete rows or columns:
m Select the row or column label and press Delete.
You can also select the legend and press Delete; you can always display the legend
again by selecting the Show Legend checkbox.
For information about changing text colors, see “Formatting Text Size and
Appearance” on page 47.
For vertical bar charts (column charts), line charts, and area charts, the Y-axis is the
value axis and the X-axis is the series axis; for horizontal bar charts, the X-axis is the
value axis. Pop-up menus are pictured below as they appear when a column chart is
selected.
To place grid labels and tick marks along an axis:
1 Select the chart.
2 In the Chart Inspector, click the Axis button if it is not already selected.
3 To add grid labels and tick marks along the series axis, choose an option from the X-
Axis pop-up menu. (For horizontal bar charts, choose from among these same options
in the Y-Axis pop-up menu.)
4 To add grid labels and tick marks to the value axis, choose from the Y-Axis pop-up
menu. (For horizontal bar charts, choose from among these same options in the X-
Axis pop-up menu.)
5 To change the position of data point values, choose an option from the Data Point
Settings pop-up menu.
6 Use the Font panel (Format > Font > Show Fonts) to choose a font, font size, and style
for the data point labels.
For pie charts, you can show data point labels as a percentage of the whole or as
absolute values by selecting or deselecting “Show Pie Values as Percentages” in the
Data Point Settings pop-up menu. You can also show the series names.
Some chart styles offer further options for formatting series elements. See the
following sections for information about special formatting options for pie charts, bar
charts, line charts, and area charts.
Pie Charts
For pie charts, Pages charts only the first data set in the Chart Data Editor (the first
data point for each data series). If the data series are in rows in the Chart Data Editor,
only the first column is charted; if the data series are in columns in the Chart Data
Editor, only the first row is charted. Thus, one pie chart represents a single data set,
and each wedge is one element in that set. Other data sets in the Chart Data Editor
are maintained, but they are not displayed in the pie chart. You can chart any data set
by moving it to the first position in its row or column.
To select individual pie wedges:
1 Select the chart, then click to select a single wedge.
2 To select additional wedges, do one of the following:
 To select all the wedges, choose Edit >Select All (or press Command-A).
 To select noncontiguous wedges, hold down the Command key as you select each
wedge.
 To select a continuous range of wedges, select the first wedge, then hold down the
Shift key as you select the last wedge.
You can also type a number in the Explode field, or use the arrows to increase or
decrease the number.
You can also change the opacity of the chart and individual chart elements, such as
the legend. (For more information, see “Adjusting Opacity” on page 135.)
To rotate a pie chart:
m Select the chart and drag the Rotation Angle wheel in the Series pane of the Chart
Inspector, or type a value in the Rotation Angle field.
Bar and Column Charts
You can apply shadows to individual data series or to the entire chart. You can adjust
the opacity for the chart as a whole or for individual series (but not individual bars).
You can also adjust the spacing between data sets or individual bars.
To adjust spacing between individual bars or data sets:
1 Select the chart.
2 In the Chart Inspector, click the Series button if it is not already selected.
3 To change the space between bars, type a value (or click the arrows) in the “Gap
between bars” field.
4 To change the space between data sets, type a value in the “Gap between sets” field.
The value is the percentage of the bar thickness. Decreasing the space between the
bars makes them thicker. You can also move the pointer near a bar edge until it
becomes a double-headed arrow, then drag to make the bars thicker or thinner.
To put a shadow on each bar:
1 Select the chart or a data series.
2 In the Series pane of the Chart Inspector, choose Individual from the Shadow pop-up
menu.
If you select one data series and choose an item from the Shadow pop-up menu, the
choice applies to all series in the chart.
3 In the Graphic Inspector, set shadow attributes. (For more information, see “Adding
Shadows” on page 133.)
To adjust the opacity of a chart:
m Select the chart and drag the Opacity slider in the Graphic Inspector. For more
information, see “Adjusting Opacity” on page 135.
3 Fill the symbol by choosing one of the options in the Symbol Fill pop-up menu.
To set the line color and shadow:
m Use the Stroke and Shadow controls in the Graphic Inspector.
For more information about using the Graphic Inspector to set line color, shadow, and
the fill for data point symbols, see Chapter 7, “Changing Object Properties.”
169
3 Choose a standard paper size from the Paper Size pop-up menu. If you want to set a
custom paper size, do the following:
a Choose Custom Paper Size from the Settings pop-up menu.
b Click New and type a name for the new paper size.
c Specify the paper’s height and width in the Paper Size fields, and specify the
printable area margins you want to use in the Printer Margins fields.
d Click Save.
e Choose Page Attributes from the Settings pop-up menu.
f Select the new paper size you named in the Paper Size pop-up menu. It will be near
the bottom of the list.
g Click OK.
Landscape orientation
with the top of the page
on the right side of the
paper
To be sure everything is laid out the way you expect, it’s a good idea to preview a
document before you print it out.
To preview a document for printing:
1 Choose File > Print, and then click the Preview button in the Print dialog.
Preview shows what individual document pages will look like when printed. It doesn’t
show the effects of some layout options, such as borders. (For more information about
layout options, see “Setting a Print Layout and Other Options” on page 172.)
2 Select the checkbox labeled Soft Proof at the bottom-left corner of the Preview
window to take your printer’s capabilities into account. For example, if you’re printing
a color document to a black-and-white printer, selecting Soft Proof previews the
document in black and white.
3 Click Print to print your document directly from the Preview window.
For information about using Preview, see Preview Help. (Choose Help > Preview Help
when the Preview window is active.)
2 Choose the number of pages you want to appear on each sheet from the “Pages per
Sheet” pop-up menu.
3 Select a layout direction.
4 Choose the line style you want to separate each printed page from the Border pop-up
menu.
To print double-sided:
m Choose Layout from the pop-up menu beneath the Presets pop-up menu, and then
select one of the following:
 Long-Edge Binding: Prints the pages to be bound lengthwise.
 Short-Edge Binding: Prints the pages to be bound on the short side of the paper.
Note: Not all printers can print double-sided. Check the documentation that came
with your printer.
To save your printing options as a preset:
m Choose Save As from the Presets pop-up menu in the Print dialog and type a name for
the preset.
The templates that come with Pages provide ideas for page designs, and also define
the look of charts, tables, and text. Within each template, the following attributes can
be defined:
 Page orientation
 Page margins
 Page numbering
 Background graphics (watermarks)
 A variety of text styles, including body text, headers, footers, callouts, and so on
 Table of contents styles
 Bullet and numbering styles
 Object fills and line styles for drawn objects
 Chart colors and styles
 Look of tables
 Additional template page designs
You can modify any of these attributes to create your own templates. Creating your
own template can also be as simple as selecting an existing template and adding your
company logo to the page.
177
If you want to design a new template from scratch, begin with a Blank template. It
may be useful to proceed through all of the sections in this chapter in order.
Once the object has been placed on the section master, it cannot be selected, so you
can’t accidentally move it. If you want to move it or make changes to it, you can make
it selectable.
To edit a master object:
m Choose Format > Advanced > Make Master Objects Selectable, and then select the
object you want and edit it.
You can customize any of these for the template you are creating, or you can use the
defaults that already exist in the template you started with (including the Blank
template).
To learn about creating paragraph styles, character styles, and list styles, see
Chapter 4, “Working With Styles.” To learn about creating styles for the table of
contents, see “Styling a Table of Contents” on page 103.
You can set default attributes for text boxes, shapes, tables, and graphics by placing
one of each of these items on a page, formatting it the way you want, and then using
the Format menu commands to define these new attributes as the defaults.
Defining Attributes for Text Boxes and Shapes
Setting the default attributes for text boxes and for shapes is very similar. Design text
boxes and shapes just the way you want them, with your preferred fonts, colors,
opacity, shadows, and so on. (Because line length and orientation cannot be defined
within a template, line attributes—such as color, thickness, and opacity—must be set
separately.)
To set default styles for text boxes and shapes:
1 Place a fixed text box and a shape on the page. To read about placing a fixed text box,
see “Creating Callouts, Sidebars, and Highlighted Text” on page 65. To read about
placing drawn objects, see “Adding Simple Shapes, Tables, and Charts” on page 108.
2 Type text into the box and shape and then select the text and set its attributes. To
read about setting text attributes, see “Formatting Text Size and Appearance” on
page 47.
3 Select the text box and the shape, and set attributes for both (for example, fill color
and outline style). To read about setting object properties, see Chapter 7, “Changing
Object Properties.”
4 For the text box and the shape, set text wrapping in the Wrap Inspector. To read about
setting text wrapping, see “Wrapping Text Around an Object” on page 118.
5 Select the shape or text box and choose Format > Advanced > Define Default Shape
Style or Define Default Text Box Style.
6 Delete the text box and shape from the page.
2 Select a page title and click the up or down arrow buttons to change its position in
the list.
Click the Delete button to remove it from the list.
3 Click Done.
You can create a new Template category by creating a new folder in the following
location:
Index
> symbol (in menu bullets transposing data series/
commands) 12 modifying 84 sets 153
checking spelling 42
A C clipping indicator 66, 68,
accent marks 51 callouts 147
adding pages 31 defining defaults 181 color
aligning text 55 capitalization 54 gradient 130
alignment Center Tab icon 59 object fill 130
of bulleted text 85 characters of text 50, 57
of text 54, 58 formatting 48 opacity 128
alignment guides 20 typing special 52 selecting 128
alternate pages character spacing 57 Colors window 25, 127
different headers/ character style ColorSync 174
footers 100 creating 82 column break 94
anchor point icon 19 modifying 81 symbol 94
AppleWorks 29 Chart Data Editor 157 column charts 166
area charts 168 adding/deleting rows/ columns 92
columns 158 changing outside
B editing rows and margins 95
bar charts 166 columns 158 changing the number
baseline 54 charts of 95
baseline shift 79 adding 156 formatting 93
bookmarks defining defaults 182 starting at top of
about 124 editing data 157 page 95
adding and using 125 formatting copying text 39
breaks appearance 159 cropping. See masking
column 94 formatting axes and images
layout 18, 94 labels 161 custom template 186
section 99 placing 109 cutting text 39
bulleted lists show/hide legend 159
creating 62
187
D about 107 to webpages 124
date field 97 adding 35 types 124
decimal tab converting 110 hyphenation 79
changing character 61 resizing 115
Decimal Tab icon 59 Font panel I
default template 30 about 24 image placeholders. See
deleting text 39 formatting text 48 placeholder
dictionary fonts 49 graphics
changing 43 color 50 images
language 79 size 49 adding fixed 35
document typeface 49 adding inline 35
planning 25 footers fill 130
printing 46, 169 adding 97 masking 111
saving 45 footnotes iMovie 113
document layout formatting 99 importing
show and hide 34 inserting 98 AppleWorks 29
numbering 90, 98 Microsoft Word 29
E formatted text fields 97 indent
formatting marks See hanging 62
email addresses 125
invisibles indenting list items 64
exporting documents 175
Info pane 90
F G inline object
graph. See charts. See also about 106
facing pages
images adding 35
new document
graphics converting 110
section 100
importing files 107 resizing 115
setting up 90, 96
inset margin 69
file
saving 45 H inspectors
headers and footers about 23
file types
discontinuous 99 invisibles 19
list of graphic types 105
help, onscreen 12 showing and hiding 34
list of movie/sound
HTML 175 iPhoto 113
types 122
hyperlinks iTunes 113
finding and replacing
text 39, 40 creating 124
finding text 39, 40 disabling for K
first page editing 126 keyboard layouts
setting up unique 100 to bookmarks 126 viewing 52
fixed object 35 to email messages 124
188 Index
L setting for locking/unlocking 38
landscape 91 document 90 moving backward/
language 79 masking images 111 forward 116
changing 43 master graphics 101, 178 moving fixed 115
layout 92 master object 99, 101 moving inline 115
show and hide 34 master objects 178 opacity 135
starting at top of about 18 rotating 115
page 95 media selecting all 116
layout break 18, 94 importing files 107 selecting behind
symbol 95 Media Browser 113 text 116
layout view 17 about 34 shadows 134
leader lines 61 Metrics Inspector 136 text wrapping 119
Left Tab icon 59 Microsoft Word 29, 175 opacity 135
ligature 54, 79 exporting to 175 ordered lists 63
line break creating 63
lists 63 N orientation, page 91
line break icon 19 new document original size 138
line charts 168 selection 30 orphan lines 78
line spacing Non-breaking space outlines
before/after icon 19 creating 62
paragraphs 57 numbering pages 96, 97 outlines See ordered lists
setting 56 outline style
linked text boxes 66 O modifying 86
lists object
bulleted 62 locking/unlocking 117 P
indenting 64 text wrapping 121 page
line break 63 objects orientation 91, 169
numbered 62 adjusting position 137 setting margins 92
list style adjusting size 137 page break icon 19
modifying 84, 86 constrain page layouts
locking objects 38 proportions 137 creating and
fixed 35 capturing 184
M flip horizontally/ managing 184
magnifying the view 17 vertically 116 page numbering 96, 97
margins flipping and discontinuous 99, 100
page 92 rotating 137 pages, additional 31
paragraph 61 grouping/ Page Setup 91, 169
ungrouping 117 paragraph
Index 189
background color 51 R modifying character 81
borders 67 rich text format 175 modifying
fill color 67 Right Tab icon 59 paragraph 77
indent 62 RTF 175 modifying tiered list
margins 61 rulers 20 (outline) 86
paragraph break icon 19 changing units 20, 36 overrides 75
paragraph fill 79 showing 36 Styles drawer
paragraph formatting about 21
using hyphenation 90 S subscript 47
using ligatures 90 saving documents 45
superscript 47
paragraph style scaling an image 131
symbols
creating new 80 section break 99
inserting in text 52
modifying 77 shadows 134
PDF 110, 175 text 51 T
pie charts 164 shapes tab icon 19
placeholder graphics 15, aligning text 55 table
18, 34, 184 inserting text in 68 adding rows and
placeholder text placing 109 columns 144
about 18, 32 shortcut menu 25, 144 cells, aligning text 55
creating 183 shortcuts cells, automatically fit
editing 183 keyboard 25 contents 147
using 32 menus 25 cells, deleting
plain text 175 sidebars contents 144
portrait orientation 91 defining defaults 181 cells, formatting
position tags 36 size tags 36 borders 149
presets 173 smart quotes 53 cells, inset margins 149
printing space icon 19 cells, merging 146
adjusting color 174 cells, resizing 147
spacing text 54
cover page 172 cells, selecting 142
special characters/
creating presets 173 cells, selecting
symbols 52
document 46, 169 spelling 42 borders 143
double-sided 173 strikethrough text 50 cells, splitting 147
odd/even pages styles cells, text
only 172 applying 73 alignment 148
paper size 169 copying and pasting 76 delete rows and
reverse order 172 importing 74 columns 145
print preview 46 modifying bulleted/ editing text 143
numbered 84
190 Index
header rows and Text Inspector
columns 146 List pane 83
number of rows and Tabs pane 59, 60
columns 145 Text pane 55
placing 109, 140 text placeholders. See
setting defaults 182 placeholder text
Table Inspector 144 text wrapping 118
table of contents tiered numbers 86
formatting 103 time field 97
generating 102 tinted image fill 132
pane 90 toolbar
tabs customizing 22
changing decimal 61 tracking 54
changing default 59 typography settings 50,
tab stops 54
deleting 61 Typography window 54
setting 58, 60
Template Chooser 30 U
text underlining text 50
alignment 55 Undo command 33
alignment and URL detection 125
spacing 54
capitalization 47 V
color 50 view
copying 39 layout 17
cutting 39 zooming in/out 17
deleting 39
formatting 48 W
raising or lowering 47 watermarks 101, 178
shadows 51 widow lines 78
size 49 Wrap Inspector 118
strikethrough lines 50
underlines 50 Z
text box
zooming in/out of
aligning text 55
document 17
defining defaults 181
formatting 69
linked 66
Index 191
4-2644.Cover 12/6/04 1:53 PM Page 1
Pages
User’s Guide
www.apple.com
034-2644-A
Printed in XXXX