XTRM-3

Transformer Turns Ratio Meter

www.motwane.com
 Features
XTRM-3
Transformer Turns Ratio Meter Fully automatic, no manual balancing required
Testing single phase and three phase transformers
Motwane has introduced Transformer Turns Ratio Meter Automatic ratio measurement of transformer
XTRM-3. XTRM-3 measures the transformation ratio of vector group
single phase and three phase transformers using modern Calculation of ratio error
electronic techniques. This replaces the Ratio testers Rugged leads with distinct color code
using ‘current balancing bridge’ circuits, requiring manual Isolates test voltage automatically after test
‘null’ balancing. XTRM-3 incorporates breakthrough Facility to save 500 Test results
technology and design that gives accurate and reliable In- built printer
results repeatedly. It is micro controller operated user CE and EMC compatible
friendly and reliable tester. XTRM-3 incorporates a large IP 54 compatible
LCD screen for display of menu and results. The entire test
is done automatically and quickly. Operator enters the test
parameters and XTRM-3 takes over, applies the test
voltage, balances the bridge, takes the readings, and
displays the results on the LCD screen. The results can be
Applications
printed on built-in printer after the test is over. The
Turn Ratio testing of Single phase/ Three phase
windows based software is provided for easy operations
Auto Transformers, Power Transformers and
of the Turn Ratio Meter via USB communication port.
Distribution Transformers
LV and HV windings are automatically isolated after the
measurement is over. The XTRM-3 is a single unit design,
encased in an hard industrial cabinet, lightweight (only 10
kg), achieving portability.

MOTWANE
5K-PI Diagnostic Insulation Tester
 Shows the true electrical ratio as expected in operation
Technical Specification Software Details
Power supply : 100-240VAC,50/60 Hz Full Windows compatible software
Software is fully compatible with Microsoft
Measurement ratio : 1 : 10000
Type : Window based Software
Display : LCD
Interface : USB communication port
Accuracy : 0.5% (for Measurement ratio
Features : Remote Operation
up to 10000) : Data down loading
Test voltage : 200V AC : Analysis and report
Excitation Current : Upto 0.5A generation
Excitation Accuracy : ± 1mA
Printer : Built in Thermal printer
PC interface : USB
Report Storage : 500 reports
Environmental Specifications
Operating Temperature : 0 ºC to 50 ºC
Storage Temperature : -10 ºC to 60 ºC

Relative Humidity : ≤ 85%RH at 400 max (non

condensing)
Physical Specifications
Dimensions(L X W X H) : 284 x 425 x 155 mm
Weight : Approx. 10 Kg
Safety features
Trending of data can reveal vital information about
Safety in accordance with EN 61010-1 deterioration, the enables user to take informed decision
EMC in accordance with EN 61326-1 regarding maintenance.
CE Certified
Measurement CAT III 600V/ CAT IV 600V
Ingress Protection IP 54
Accessories
CAT II (1000V)/CAT III (600V) Reinforced insulation
Standard Accessories
Emergency stop
Mains Power Cord : 1 No.
Test Lead Set : 1 No.(5m long with
terminated alligator clips)
Thermal Paper roll : 1 No.
Instruction Manual : 1 No.
Calibration Certificate : 1 No.

Optional Accessories
10m Extension Cable Set : 1 No.
Software : 1 No.
USB Cable : 1 No.

MOTWANE
5K-PI Diagnostic Insulation Tester
Notes
1. The Instrument is accompanied with Test & calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy is
continuous improvement of its products. We therefore reserve the Right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of
the range to 95% of the range. 5. Accuracy Specified for temperature range of 250C ± 50C & 55% RH ± 10%