Ty 1803

User Manual
Product No.: TY-1803

Version Number: A0
Product Introduction:
This product is a Bluetooth controller receiver, is
suitable for wireless controller connection to the console.
Insert the receiver into the PC or N-S console base, and
when it receives the Bluetooth controller signal you can
play the controller. One receiver can only be
connected to one Bluetooth controller. Once
successfully connected, the transparent light guide will
emit blue light. Besides, it can be automatically
reconnected again next time. This product is strong in
connection compatibility, small and portable, simple
and convenient to use.
Product Pictures:
Code Button
Transparent
light guide
USB male port
Function Introductions:
1. Code Button: It is used to switch the light display to
inform the receiver of the mode and state at this time.
When the product is inserted into the device, the LED
light flashes slowly, indicating that the product is in
the tie-back mode. At this time, press the button and
the product will enter the Bluetooth device pairing
mode. During the pairing, the transparent light guide at
the end of the product will be display light.
2. Transparent light guide: The light guide color is blue.
There are several different LED lighting modes according
to the working status.
2.1. The LED light blinking slowly: The Bluetooth device
is not connected, or enters the tie-back mode.
2.2. The LED light flash: The receiver enters the
pairing state and is being searched for connection.
2.3. The LED light steady on: The receiver is
successfully connected to Bluetooth device.
4 Compatible platforms and devices:

1. Compatible platform: PC, after successful connection,
it will enter the X-input mode by default, and you can
play on the game platform such as Steam; Android
TV box;
N-S Console base.
2. Compatible devices: P-4 Bluetooth controller; P-5
controller; X-One S/X Bluetooth controller (only
compatible with version 5.11.311.80 and lower version,
not support the latest version); N-S Pro controller.
3. One receiver can only be connected to one Bluetooth

controller. PC or N-S console base can be plugged
into multiple receivers at the same time.
5 Instructions for Bluetooth Connection of Receiver:

The connection mode of controller devices can refer
to the Bluetooth search steps. First, we need to open
the controller according to the operation mode
correspond- ing to the controller model, so that the
controller can enter the Bluetooth search mode.
Then plug the USB male connector of the receiver
into the USB interface of PC equipment or N-S
console base (When connecting the N-S console
base, you must enable the wired connection option
on the console. Otherwise, the receiver cannot be
used), and the LED will light flashes
slowly. Then press the code button once, and the LED
light turns to flash, and the receiver enters the pairing
mode. When the LED light stops flashing and turns to
steady on, it indicates that Bluetooth connection is
successful and can be used. This product has the
function of automatic memory device. If there is already
a connected controller device, pressing the pairing
button to connect it back automatically. Different types
of controller connection mode is as follows:
1. Description of Bluetooth connection of P-4
controller: When the controller is in normal power
status, press and hold the SHARE+PS key on the P-4
controller for 4-5 seconds. Then the controller
channel light will flash quickly, indicating that the
controller has entered the pairing state. Release the
key and the controller enters the Bluetooth search
mode. At this time, plug the receiver into the device,
press the pairing button of the receiver, and the LED
light of the receiver will flash quickly to enter the
pairing mode to connect.
2. Description of Bluetooth connection of X-One S/X

controller (only compatible with version 5.11.311.80 and
lower version, not support the latest version): When
the controller is in normal power status, press the X-B
key to wake up the controller, and the light of the
controller flashes slowly. Then press and hold the
pairing key at the front of the controller, and the light
will flash quickly, indicating that the controller has
entered the pairing mode. At this time, plug the
receiver into the device to be connected, and press the
pairing button of the receiver to enter the pairing mode
to search for the connection.
3. Description of Bluetooth connection of P-5
controller: When the controller is in normal power
status, press and hold the SHARE+PS key on the
controller for 4-5 seconds and the channel light of the
controller will flash quickly, indicating that the
controller has entered the pairing state. Release the
key, and the controller enters Bluetooth search mode.
At this time, plug the receiver into the device, press
the pairing button of the receiver and the LED light
will flash into the pairing mode to connect.
4. Description of Bluetooth connection of N-S Pro

controller:
When the controller is in normal power status, long press
the pairing button of Pro controller, and the LED light
inside the controller will start to flash slowly to enter the
pairing state. Plug the receiver into the device, press the
button of the receiver, and the LED light will flash quickly
into the pairing mode to connect.
6 Technical parameters:
1. Working Voltage: DC 5V
2. Working Current: ≤40mA
3. Bluetooth Version: 5.0
4. Bluetooth Distance: The effective distance is 8-10m
7 Notice:
In order to use this Bluetooth product correctly and
ensure its good performance, please read it carefully
and follow the instructions:
1. When using this product, please ensure that the
controller has Bluetooth wireless function and the
battery power is normal. If the controller is used in a
low power state, Bluetooth connection will be affected
and Bluetooth disconnection will occur.
2. When connecting the N-S console base, you
must enable the wired connection option on the
console. Otherwise, the receiver cannot be used.
3. After the Bluetooth connection is successful, the PC
console needs to be used on game platforms such
as Steam, and the controller cannot be directly on
the PC desktop.
4. At present, the product does not support vibration
transmission to P-5 controller, other controllers
support vibration transmission.
5. P-4 and P-5 controller gyro can be used on N-S
console, while X-B controller does not have gyro
function.
6. The product can be matched with a variety of
wireless Bluetooth controller to connect to PC
terminal or Android TV box. After successful
connection, X-input mode will be entered by default.
After long press PS (HOME) button for 3-4 seconds,
the LED on the receiver will change from steady to off.
Release the PS key to switch the mode to D-input
mode, which can be played on Steam and other
game platforms.
7. DO NOT seriously impact this product.
8. DO NOT contact benzene, thinner and
other chemicals.
9. Please keep away from strong magnetic fields
and electric fields.
10. Please avoid direct light or heating equipment.
使用说明书
产品型号: TY-1803 版本号: A0
产品简介:
本产品为一款蓝牙手柄接收器,适用于无线手柄连接主机使用，
将接收器插入到 PC 电脑主机或 N-S 主机底座，与蓝牙手柄配对
连接成功后，即可对手柄进行操控。下次再使用自动回连，一个
接收器连接一个蓝牙手柄，接收器工作时透明导光件发出蓝光。
此产品连接兼容性强，小巧便携，使用方式简单。
产品图片:
对码按键
透明导光件
USB 公头
功能介绍:
1. 对码按键 :用于切换灯光显示接收器此时所在的模式与
状态。产品插入设备, LED 慢闪处于回连模式，按压对码按键 ,
产品进入蓝牙设备配对模式，配对时产品尾部透明导光件有灯
光显示。
2. 透明导光件：导光件灯光显示颜色为蓝色，根据不同
的工作状态有以下几种不同的 LED 灯光模式。
2.1LED 灯光慢闪：表示未连接蓝牙设备，或进入回连状态搜
索模式。
2.2LED 灯光快闪：接收器进入配对状态，正在搜索设备进行
连接。
2.3LED 灯光常亮：表示接收器已经跟蓝牙设备成功连接。
4 本产品可支持平台及兼容设备如下：
1. 支持平台：电脑 PC 端，连接成功默认进入 X-input 模
式，可在电脑 Steam 等游戏平台游玩；安卓电视盒子；N-S 主
机底座。
2. 兼容设备：P-4 蓝牙手柄；P-5 手柄；X-One S/X 蓝牙
手柄（只有兼容版本 5.11.311.80 和较低的版本，不支持最新版
本）；N-S Pro 手柄；
3. 一个接受器只可连接一个蓝牙手柄，PC 电脑主机或 N-
S 主机底座可同时插入多个接收器使用。
5 蓝牙连接说明：
手柄设备连接方式参考其蓝牙搜索步骤。首先我们需要按照手柄
型号对应的操作方式将手柄开启，让手柄进入到蓝牙搜索模式。
然后将接收器插入到 PC 电脑主机或 N-S 主机底座的 USB 接口上
（在使用 N-S 主机底座时，需要开启主机上设置的有线连接选
项，否则无法使用），接收器的灯光为慢闪处于回连模式，此时
需要按压一下配对按键，接收器灯光显示为快闪，接收器进入配
对模式。当接收器停止闪烁,灯光显示常亮表示连接成功，手柄
可正常使用。本产品具有自动记忆设备功能，若已有连接过的
手柄设备，按一下配对键可自动回连，不同类型手柄连接方式
如下：
1.P-4 手柄蓝牙连接说明：
在手柄正常电量状态下，同时按住 P-4 手柄上的 SHARE+PS 键 4-
5 秒，原装手柄通道灯快速闪烁，表示已进入配对状态，释放按
键
，手柄进入蓝牙搜索模式。此时将接收器插到设备上面，按一下
接收器的配对按键，接收器 LED 灯快速闪烁进入配对模式即可
连接。
2. X-One S/X 手柄（只有兼容版本 5.11.311.80 和较低的

版本，不支持最新版本）蓝牙连接说明：
在手柄正常电量状态下，先按 X-B 键唤醒手柄，手柄上的灯光
慢闪。然后按住手柄前端的配对键，手柄灯光进入快速闪烁，说
明此时手柄已进入配对模式。此时将接收器插到所需连接的设备
上面，按一下接收器的配对按键进入配对模式即可搜索连接。
3.P-5 手柄蓝牙连接说明：
在手柄正常电量状态下，同时按住手柄上的 SHARE+PS 键 4-5
秒，手柄通道灯快速闪烁，表示已进入配对状态，释放按键，手
柄进入蓝牙搜索模式。此时将接收器插到设备上面，按一下接收
器的配对按键,LED 快闪进入配对模式即可连接。
4.N-S Pro 手柄蓝牙连接说明：
在手柄正常电量状态下，长按 Pro 手柄的配对按键，手柄内侧
LED 灯开始慢闪进入配对状态，将接收器插到设备上面，按一
下接收器的按键，LED 灯快闪进入配对模式即可连接。
6 技术参数:
1.工作电压: DC 5V
2.工作电流: ≤40mA
3.蓝牙版本：蓝牙 5.0
4.蓝牙距离： 8-10M
7 注意事项:
为了使用者正确使用本产品，确保产品性能良好，请认真阅读并
遵守：
1.使用本产品,请确保手柄具备蓝牙无线功能且电池电量正常，如
手柄在低电状态使用会影响蓝牙连接，出现蓝牙断连现象。
2.在使用 N-S 主机底座时，需要开启主机上设置的有线连接选
项
，否则无法使用。
3.在使用 PC 电脑主机时，需要在 Steam 等游戏平台使用，直接
在电脑桌面是无法操控手柄的。
4.目前暂不支持震动传输到 P-5 手柄,其他手柄均支持震动传输。
5.P-4、P-5 手柄陀螺仪支持在 N-S 主机上使用，X-B 手柄无陀螺
仪功能。
6.可匹配多款多样的无线蓝牙手柄连接电脑 PC 端或安卓机顶
盒，连接成功默认进入 X-input 模式，长按 PS(HOME)键 3 到 4
秒，接收器上的 LED 会由常亮变为熄灭，松开长按的 PS 键，可
将模式进行切换为 D-input 模式，可在电脑 Steam 等游戏平台
游玩。 7.切勿严重撞击本蓝牙产品
8.切勿接触苯、稀释剂等化学药品
9.请避开直射光线或发热器具；
10.请不要靠近强磁场、电场。

Ty 1803

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ty 1803

Uploaded by

Copyright:

Available Formats

User Manual

Product No.: TY-1803

USB male port

4 Compatible platforms and devices:

3. One receiver can only be connected to one Bluetooth

5 Instructions for Bluetooth Connection of Receiver:

2. Description of Bluetooth connection of X-One S/X

4. Description of Bluetooth connection of N-S Pro

2. X-One S/X 手柄（只有兼容版本 5.11.311.80 和较低的

You might also like