ENERSYS
ENERSYS
RESERVE
Visit us at www.enersys-emea.com POWER EN-VFT-RS-016 - January 2014
Construction Installation & Operation Standards
• Positive plates designed to prolong service • Monoblocs are designed for installation in • In compliance with the requirements of the
life and enhance corrosion resistance cabinets or on stands, close to the point of international IEC 60896-21/22 standard
• Separators in low resistance microporous use. A separate battery room is not
• Classified as “Long Life” according to the
glass fibre. The electrolyte is absorbed within necessary
Eurobat Guide 1999
this material, preventing acid spills in case of • It is recommended that PowerSafe® V Front
• Designed to meet Telcordia® SR-4228
accidental damage Terminal batteries are installed on their base
requirements
• Case and lid in flame retardant ABS material, • Recommended float charge voltage:
• Recognised by UL (UL Standard 1989)
highly resistant to shocks and vibrations 2.280Vpc at 20°C (68°F)
2.265Vpc at 25°C (77°F) • Approved to be shipped as nonhazardous
• Terminal with brass insert for maximum
cargo in accordance with the requirements of
conductivity and with high compression • Six months shelf life at 20°C
IMDG (International Maritime code for
grommet for long life • Reduced maintenance: Dangerous Goods) and ICAO (International
• Self-regulating pressure relief valve prevents no water addition required Civil Aviation Organisation)
ingress of atmospheric oxygen
• The management system governing the
• Flame arrestors built into each bloc for manufacture of PowerSafe V-FT products is
increased operational safety ISO 9001 certified
General Specifications
Nominal Capacity (Ah) Nominal Dimensions (mm)
Outline Drawings
EnerSys World Headquarters 2366 Bernville Road, Reading, PA 19605, USA Tel: +1-610-208-1991 / +1-800-538-3627
EnerSys EMEA EH Europe GmbH, Löwenstrasse 32, 8001 Zurich, Switzerland
EnerSys Asia 152 Beach Road, Gateway East Building #11-03, Singapore 189721 Tel: +65 6508 1780
© 2014 EnerSys. All rights reserved.
Trademarks and logos are the property of EnerSys and its affiliates, except ISO, which is not the property of EnerSys
Subject to revisions without prior notice. E.&O.E.
www.enersys-emea.com EN-VFT-RS-016 - January 2014