F5.301a Reviewed2 PDF

F5.301a.v2021-04-14.
q52
Exam Code: 301a
Exam Name: BIG-IP LTM Specialist: Architect Set-Up & Deploy
Certification Provider: F5
Free Question Number: 52
Version: v2021-04-14
# of views: 121
# of Questions views: 592
https://www.freecram.com/torrent/F5.301a.v2021-04-14.q52.html
NEW QUESTION: 1
A custom TCP application using a single server is being migrated to the LTM device. A
server is being added to the pool. The application is known to violate the TCP protocol
RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?
A. Performance (Layer 4)-pure layer A forwarding
B. forwarding (Layer 2) pure routing forwarding, pool cannot be specified
C. Stateless TCP protocol is not applicable
D. Standard-tcp profile exists, RFC verification will be performed
Answer: A (LEAVE A REPLY)
NEW QUESTION: 2
An LTM Specialist needs to load balance an application using an LTM device to meet the
requirements:
The application servers do NOT Support SSL, but client access to the application should
be secured.
Multiple requests from the same client should be sent to the same pool member.
All pool members will have roughly the same processing power, and traffic should be
distributed evenly.
The LTM device is NOT the pool members' default gateway.
which configuration should the LTM Specialist.
A. a performance L4 virtual server with a Client SSL profile and Source Address
persistence
B. A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie
persistance.
C. a performance 14 virtual server with a SNAT and cookie persistence
D. A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and
cookie persistence
E. A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie
persistence
Answer: B (LEAVE A REPLY)
NEW QUESTION: 3
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the
existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
A. 1
B. 3
C. 2
D. 4
Answer: C (LEAVE A REPLY)
NEW QUESTION: 4
Exhibit.
The three VLANS shown provide connectivity to backend servers. The backend servers
are being moved to unmanaged switches and require separate interfaces.
How should the F5 device interfaces be configured?
A. Create a Trunk interface and select VLAN_A, VLAN_B. and VLAN_C.
B. Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to
untagged. Create VLAN_C move interface 1.3 to untagged.
C. Create a Trunk interface and combined interface 1.1.1.2 and 1.3.
D. Create VLAN named VLAN_A enter 100 under Tag and move interface 1.1 to tagged
Create VLAN_B enter 200 and move interface 1.2 to tagged Create VLAN_C Center 300
and move interface 1.3 to tagged.
NEW QUESTION: 5
An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual
server type should be used?
A. Performance (HTTP)
B. Standard
C. Performance (Layer 4)
D. Stateless
NEW QUESTION: 6
An LTM Specialist has trouble with SNMP traps in the management network The ITM
Specialist takes the network capture shown to troubleshoot:
What should the UM Specialist change to capture packets related to this workflow?
A. the tcpdump filter expression
B. the interface
C. the verbose level
D. the port
NEW QUESTION: 7
A pool with a default connection limit is configured to use Round Robin as the load
balancing method. An LTM Specialist needs to ensure that the LTM device selects a
server with the fewest number of connections when new clients connect. Another pool is
using the same set of backend servers.
Which load balancing-method should the pool be changed to?
A. Weighted Least Connections (member)
B. Least Connections
C. Weighted Least Connections (node]
D. Least Connections
Answer: (SHOW ANSWER)
NEW QUESTION: 8
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in
(sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that
Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is
restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
A. Option D
B. Option A
C. Option B
D. Option C
NEW QUESTION: 9
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four
members, each with differing hardware platforms. All pool members are already assigned
to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?
A. Predictive member)
B. Round Robin
C. Observed (node)
D. Least Connections (node)
NEW QUESTION: 10
An LTM device configuration is as shown:
An LTM device configuration is as shown
What should be the two expected outcomes based on this configuration? (Choose two.)
A. A client session that has been idle for 16 minutes will be sent to the same pool member
B. A client session that has been idle for 20 minutes will be balanced to a new pool
member
C. A client session that has been idle for 12 minutes will be sent to the same pool member
D. A client session that has been idle for 48 minutes will be sent to the same pool
members
E. A client session that has been idle for 14 minutes will be balanced to a new pool
member
NEW QUESTION: 11
Exhibit.
The server team has recently configured the three new DNS servers shown for the data
center. No current DNS servers are currently configured on the LTM device.
Which command should be used to configure the LTM device to use the new DNS
servers?
A. tmsh create/systins name-servers add {192
168.1.2.192.168.100.1O0.192.168.2O0.2OO}
B. tmsh change /sysdns name-servers add
{192.168.1.2.192.168.100.100.192.168.200.200}
C. tmsh modify/sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
D. tmsh set/sysdns name-servers add {192.168.2.192.168.100.100.192.168.200.200}
Modify the configuration with modify, and create the configuration with create. Excluding B
and D, and the question is to modify the DNS pointer of E5 itself the need to use is modify.
NEW QUESTION: 12
An LTM Specialist needs to use a set of addresses to access an Internet website in an
outbound configuration.
Which feature should the LTM Specialist configure?
A. NAT pool
B. SNAT pool
C. NAT address
D. SNAT address
NEW QUESTION: 13
Consider the monitor configuration displayed below.
What is the status of a pool member that responds with ''200 OK''?
A. available
B. down
C. unknown
D. disabled
NEW QUESTION: 14
A new DNS virtual server has been configured. Testing reveals that DNS server has failed
to accept DNS over TCP. The configuration of the virtual server is as follows:
Which action should be taken to correct this issue?

A. change the profile set on the virtual server to TCP
B. add a TCP prone to the existing virtual server.
C. change the profile set on the virtual server To TCP/UDP
D. create a new virtual server with the service port of 53 and the protocol set to TC
Answer: D (LEAVE A REPLY)
NEW QUESTION: 15
An LTM Specialist to configure a backend server to be disabled it takes longer than 30
seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
A. Interval 10, timeout 31
B. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1.
C. Interval 10, timeout 30
D. Interval 30, timeout 30
NEW QUESTION: 16
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual
server.
What needs to be completed before applying that configuration change?
A. Make sure that the BIG-IP device is NOT operating under heavy load during peak times
B. Verify that the IP address of the SNAT pool are in the same subnet as the pool
members
C. Verify that the IP address of the SNAT pool are in the same VLAN as the pool
members.
SNAT does not need to in the same vlan or same network segment as the pool member,
as long as the route is reachable , excluding C and D he connection information of the
SNAT pool to avoid port exhaustion under high concurrency
D. Review connection for the selected SNAT pool and enlarge it if appropriate
Answer: D (LEAVE A REPLY)
Valid 301a Dumps shared by Fast2test.com for Helping Passing 301a Exam!
Fast2test.com now offer the newest 301a exam dumps, the Fast2test.com 301a exam
questions have been updated and answers have been corrected get the newest
Fast2test.com 301a dumps with Test Engine here: https://www.fast2test.com/301a-
premium-file.html (150 Q&As Dumps, 40%OFF Special Discount: freecram)
NEW QUESTION: 17
The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)
B)
C)
D)
A. Option D
B. Option C
C. Option B
D. Option A
NEW QUESTION: 18
When importing a PEM formatted SSL certificate, which text needs to appear first in the
file?
A. ...SSL CERTIFICATE....
B. ...BEGIN CERTIFICATE....
C. --START CERTIFICATE....
D. ...SECURITY CERTIFICATE....
NEW QUESTION: 19
Which Standard Virtual Server settings should an LTM Specialist use to load balance
across routed path of two different ISPs?
A. address translation disabled and port translation enabled
B. both address and port translation disabled
C. both address and port translation enabled
D. address translation enabled and port translation disabled
NEW QUESTION: 20
An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web
application. The security department has informed the LTM Specialist that the following
cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?
A. Server SSL
CB. Client SSL
B. SPDY profile
C. Rewrite profile
Require SSL and flow F5 to server, server ssl
NEW QUESTION: 21
Where does a LTM Specialist view all of the objects that are part of a deployed iApp?
A. iAPP> Application Policy > Objects
B. Local Traffic > Network Map > View Map
C. IAP > Application Service > Components
D. Local Traffic . Virtual Servers > Applications
NEW QUESTION: 22
Refer to the following iRule:
What is a complete list of profiles that must be applied to the virtual server for this iRule?
A. Fast L4 , HTTP, Stream
B. TCP, HTTP, Client SSL
C. Fast L4, HTTP
D. TCP, HTTP
NEW QUESTION: 23
Refer to the exhibit.
The http monitor is applied to a pool All members are enabled One pool member stops
responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?
A. Unavailable (Disabled)
B. Offline (Disabled)
C. Available (Enabled)
D. Unknown (Enabled)
NEW QUESTION: 24
Exhibit.
An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site.
The VS HTTP passes the client requests to the webservers. The webservers query the
database servers through the VS_DB. Initially, the LTM Specialist finds the database
servers directly return the packets to the webservers.
which setting must be enabled for the configuration to function correctly?
A. VS.HTTP auto last hop
B. VS_DB snat auto map
C. VS DB auto last hop
D. VS_HTTP snat auto map
NEW QUESTION: 25
An LTM Specialist is removing some of the load off an existing cluster by adding a adding
a third BIG-IP device to the device group. The new device can deliver twice the
performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available
capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?
A. HA Capacity
B. Load Aware
C. HA Group
D. Ordered List
NEW QUESTION: 26
An application is expected to maintain more than 100,000 concurrent TCP connections to
a single pool member.
What is an appropriate SNAT configuration in this situation?
A. A SNAT pool with 4 IP addresses
B. A static SNAT
C. A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000.
AT least two snaptips are required. Options B, C, and all have only IP, which is obviously
not enough
D. SNAT automap enabled
NEW QUESTION: 27
An application requires load balancing functionality. The application must be encrypted to
the client.
Certain content must be manipulated by the following IRule:
Which set of profiles must be applied to the virtual server?
A. TCP, HTTP server SSL Stream
B. TCP, HTTP, Client SSL, Stream
C. TCP, HTTP, OnceConnect, Stream
D. Fast L4, HTTP server SSL Stream
Client encryption is required , clientssl, irule contains HTTP events and stream execution,
http profile stream profile.
NEW QUESTION: 28
An LTM Specialist has multiple SNAT and virtual server objects configured as in the
bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to
192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?
A. VS_A&SNAT_B
B. VS_A & SNAT A
C. VS_ B & SNAT A
D. VS_B&SNAT_B
NEW QUESTION: 29
AN LIM Specialist must upgrade the VCMP Guest active/standby LTM pair from version
11.3 to 11.5.3 on two VCMP Hosts.
where should the LTM Specialist import the latest 11.5.3 ISO images?
A. to the VCMP Guest instances
B. to the primary VCMP Host and the active Guest instance
C. to both VCMP Hosts
D. to the secondary vCMP Host and the standby Guest instance
NEW QUESTION: 30
A pool has four members. Ail of the servers have been designed and configured with the
same application. Each client's request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even
load across all servers?
A. Ratio
B. Priority Group
C. Least Connections
D. Observed
NEW QUESTION: 31
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)
B)
C)
D)
A. Option
B. Option
C. Option
D. Option
NEW QUESTION: 32
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source

Based on precedence, which virtual server accepts this traffic?
A. MyVS3
B. MyVS2
C. MyvS1
D. MyVS4
NEW QUESTION: 33
An HTTP monitor is created and assigned to a pool with the following non-default
configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close
Receive String: Up The HTTP server sends the following response:
What is the resulting pool status?

A. Offline (Enabled)
B. Unknown (Disabled)
C. Unavailable (Enabled)
Available (Enabled)
NEW QUESTION: 34
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?
A. Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust,
Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device
Group.
B. Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type,
Establish Device Trust, Sync Device Trust, Create Device Group.
C. Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type.
Establish Device Trust, Create Device Group
D. Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type,
Establish Device Trust, Sync Device Trust, Create Device Group
NEW QUESTION: 35
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web
application traffic to the servers on the relative performance trend?
A. Least Connections
B. Predictive
C. Ratio
D. Least Sessions
NEW QUESTION: 36
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application.
The application uses a simple request response protocol where each request and
response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
A. use a Performance (Layer 4) Virtual Server
B. increase the connection limit for pool members
C. increase the idle Timeout in a custom TCP profile
D. assign a OneConnect profile
NEW QUESTION: 37
An LTM Administrator receives an email from the NOC stating that the switch connected to
the backend server was shut down for maintenance. The BIG-IP device handles only UDP
traffic. The BIG IP device did not fail over to a DR location when no pool members were
available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking
UP the pool member.
A tcpdump of the traffic shows the following output:
A list of the monitor configuration shows the following:

Which two modifications to the LTM configuration will mark this pool member down, when
the switch is down? (Choose two.)
A. add a reverse string to the game monitor
B. enable reverse and wait for the next connection
C. enable manuai-resume on the same monitor
D. increase the timeout to three times the interval
E. also assign a gatewayjcmp monitor to the pool
NEW QUESTION: 38
AN LTM Specialist needs to determine the delay between an LTM device and the internal
web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay?
(Choose two.)
A. Server latency
B. Methods
C. Client IP
The problem is to specify the server delay of the client
D. Response codes
E. User agents
Answer: A,C (LEAVE A REPLY)
NEW QUESTION: 39
An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool
members.
Which two virtual server types should be used to meet the requirements? (Choose two)
A. Stateless
B. Standard
C. Performance (Layer A)
D. Forwarding (Layer 2)
E. Forwarding (IP)
Answer: B,C (LEAVE A REPLY)
NEW QUESTION: 40
Four members in a server pool have similar hardware platforms. An LTM Specialist needs
the load balancing method that can select the server with the fewest entries in the
persistence table.
Which load balancing method should the LTM Specialist use?
A. Observed
B. Dynamic Ratio
C. Least Sessions
D. Leas Connections
Pay attention to the examination questions, the stem is to ask the session to keep the
minimum entries in the table.
NEW QUESTION: 41
An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests.
What is the maximum number of guests that the LTM Specialist should upgrade at once?
A. TWO
B. Eight
C. One
D. Four
Explanation
Each guest is independent, just like hardware upgrades. Can only upgrade one by one,
there is no way to upgrade at the same time.
NEW QUESTION: 42
A virtual server is configured to handle https traffic. The clientssl profile is configured to use
a2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a
4096-bit RSA key in the future.
What two effects will this change have on the BIG-IP device? (Choose two)
A. Decrease to 20% of licensed TPS
B. Increased of concurrent connection on client-side
C. Decrease to 90% of licensed TPS
D. Increase of TLS Renegotiation
E. Increase of CPU usage on the BIG-IP device
Answer: A,E (LEAVE A REPLY)
NEW QUESTION: 43
The http monitor is applied to a pool. All members are enabled. One server responds as
follows.
What is the resulting status of this poo! member?

A. Offline (Disabled)
B. Offline (Enabled)
C. Unavailable (Disabled)
D. Available (Enabled)
The first picture "Send String" and "Receive String" are not clear. Send String should be
"GOOD", the response packet does not contain this keyword. Receive Disable String is
completely unclear. If the response packet contains the content of Receive Disable String
at this time, it will be Available (Disabled), If the content of Receive Disable String is not
included, then Offline (Enabled).
NEW QUESTION: 44
TWO LTM devices are in the same Device Group and configured for Ac live/Standby
Failover. The LTM Specialist observes that the HA Active and Standby device constantly
changes state. All network links use the default route domain A dedicated fiber ink is used
for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
A. The HA network is using the default routing domain.
B. The HA network is using multicast IP.
C. The HA network is not configured for mirroring.
D. The HA network latency is too high.
NEW QUESTION: 45
A pool is contoured with four members. A user has a current connection established with
10.18.1.40. The virtual server has a persistence Profile configured.
A. 10.18.1.40
B. 10.18.1.10
C. 10.18.1.30
D. 10.18.1.20
NEW QUESTION: 46
An LTM Specialist needs to assign a health monitor to a pool with two pool members
10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP.
The health of the application depends on the health of an another server (10 10 10 100)
that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health
monitors' (Choose two)
A. a custom TCP monitor that works on port 8080
B. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
C. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
D. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
E. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
F. a custom TCP monitor that works on port 9080,
Answer: A,B (LEAVE A REPLY)
NEW QUESTION: 47
An application is sensitive to packet loss and unexpected session termination. A pair of
LTM devices is configured in an Active/Standby high availability configuration. SNATS are
NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained
between the client and server during an LTM device failover event while maintaining
maximum uptime? (Choose two.)
A. configure a OneConnect profile to mirror connections
B. configure a VLAN and primary mirroring address for mirror traffic
C. enable Mirroring for a virtual server and persistence profile
D. enable Clone Pools for a virtual server and a persistence profile
E. configure a serial failover cable for mirror traffic
Answer: B,C (LEAVE A REPLY)
NEW QUESTION: 48
An application is being load balanced through the LTM device using the configuration
displayed below.
The network has been re-engineered to NAT all client connection. As a result, all client
connections are hitting the same pool member.
Which changes should the LTM Specialist make in order to restore load balancing
functionality wile maintaining session persistence?
A. Change the virtual server to Standard add an http profile, and change the persistence
profile to Cookie persistence
B. Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to
hash source Address
C. Leave the virtual server type set Performance (Layer 4) and change the persistence
type to hash
D. Change the virtual server type to Standard, add an http profile, and change the
persistence profile to Destination Address
NEW QUESTION: 49
To improve application security, an LTM Specialist must configure a BIG application
access. The BIG IP system to authenticate the client certificate before permitting
application access. The BIG-IP system must also support the ability to red to redirect users
to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client
Certificate option?
A. Request
B. Require
C. Demand
D. ignore
NEW QUESTION: 50
A web server's default gateway is the network router. The LTM Specialist needs to
introduce an LTM device to load balance to the web servers without changing the server's
default gateway.
Which deployment method and settings should the LTM Specialist use to ensure correct
traffic flow and that the web servers can obtain the actual con IP addresses?
A. SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP
headers
B. SNAT deployment with automap configured
C. route deployment without SNAT configuration
D. route deployment with Automap configured and X-Forwarded-For inserted in HTTP
headers
NEW QUESTION: 51
An LTM Specialist needs to provide statistics regarding the round-trip time between the
clients and the servers.
Which metric should be part of the analytics profile to provide that information?
A. Max TPS and Throughout
B. Response Codes
C. Page Load Time
D. User Sessions
NEW QUESTION: 52
An LI M device is experiencing a high volume of traffic. The virtual server is struggling
under the load. The problem appears to be on the server side connections. The virtual
server is accepting connections . The virtual server is accepting connections on https and
is configured with an SSL profile and http pool.
What should be added to increase the performance of the device?
A. a One Connect profile
B. smaller key to the SSL profile
C. a SPDY profile
D. an HTTP Compression profile

F5.301a Reviewed2 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

F5.301a Reviewed2 PDF

Uploaded by

Copyright:

Available Formats

F5.301a.v2021-04-14.

Which action should be taken to correct this issue?

HTTP traffic is destined to the 10 10.20.1 server from the source

What is the resulting pool status?

A list of the monitor configuration shows the following:

What is the resulting status of this poo! member?

You might also like