IMT ILED Aquarius CIRCLE-H DS EN LR1
IMT ILED Aquarius CIRCLE-H DS EN LR1
IMT ILED Aquarius CIRCLE-H DS EN LR1
CIRCLE-H® Helideck
Lighting System
Helicopter deck signalisation lighting has now taken off into a new direction with the
IMT CIRCLE-H® Lighting System.
Throughout the industry, it is now fully agreed and accepted that the old method of illuminating
the TD/PM Circle and H with flood lights results in the common dangerous problem of creating
the disorientating “black hole” effect and at the same time being a source of glare to the
helicopter pilots.
Developed with close guidance from the CAA and in full accordance with the requirements of
CAP 437, IMT’s CIRCLE-H® TD/PM Lighting System provides the optimum solution to these
problems.
Cleanly and clearly indicating the TD/PM Circle and H, the IMT CIRCLE-H® is the only fully
certified system of its type – providing optimised safety – without compromise.
The unique integrated mounting plate is able to be customised to suit specific requirements and
with a choice of fixing and installation methods to suit all deck types, the CIRCLE-H® can be
installed as a stand-alone system or as a fully integrated total helideck lighting and status light
safety system solution.
The light characteristics of the CIRCLE-H® system are designed in
line with CAP 437 requirements, our CIRCLE-H® system has being
Precision machined
IMT understand and fully appreciate that it is not merely about the CIRCLE-H® system – but just as – if
not more importantly – that it is installed correctly and proficiently. Therefore, IMT have teamed up with
selected partners so as to be able to carry out pre installation surveys of helidecks – these surveys and
inspections are carried out by fully certified and competent personnel. When installation is taking place
off-shore and where the helideck is positioned such that working conditions are liable to be extreme and
exacting, then our approved survey and install teams have the following base skill sets as an absolute
minimum:
• CompEx
• BOSIET
• MIST
• Offshore medical
• IMT approved installer status
• Mechanical fixings approved installer status
• IRATA rope access accreditation lead by a level 3 accredited team member
• Helideck landing area awareness
With regard to “new build and yard” installation – then the necessity for an extreme working conditions
trained and fully certified install team is lessened somewhat. So, whatever your install requirements
are, be it off-shore, yard, full turnkey or supervised, then IMT has the solution to best fit your needs
and legal requirements. In preparation for installation and to ensure that all issues relating to correct
compliance of CAP437, ICAO Annexe 14 and IMO MODU are covered and adhered to, IMT can offer
a comprehensive and extensive on-site helideck survey and report service. If you would like further
information and advice as to how we can help you in the process of pre-qualifying and preparation for
CIRCLE-H® installation, then please contact us.
Drawings
580 580
580
145
145
145
225
225
24.50
24.50