Chapter - 13 Surface Areas and Volumes
Chapter - 13 Surface Areas and Volumes
(1)
SURFACE AREAS AND VOLUMES
13
The lateral surface area of the cuboid = Area of face AEHD + Area of face BFGC + Area of
face ABFE + Area of face DHGC
LSA (cuboid) = 2(b × h) + 2(l × h) = 2h(l + b)
Length of diagonal of a cuboid =√(l2 + b2 + h2)
4. If the length of each edge of a cube is 'a' units, then:
Lateral surface area = 4 × (edge)2
Total surface area = 6 × (edge)2
Volume = (edge)3
Diagonal of a cube =√3 × edge
(2)
SURFACE AREAS AND VOLUMES
13
(3)
SURFACE AREAS AND VOLUMES
13
Area of curved surface or lateral surface area = perimeter of the base x height = 2𝜋𝑟ℎ
Total surface area (including both ends) = 2𝜋𝑟ℎ + 𝜋𝑟 2 + 2𝜋𝑟 (ℎ + 𝑟)
Volume = Area of the base × height = 𝜋𝑟 2 ℎ
6. If R and r respectively denote the external and internal radii of a right circular hollow
cylinder and h denotes its height, then:
Area of each end = 𝜋𝑅 2 − 𝜋𝑟 2
Area of curved surface = 2𝜋 (𝑅 + 𝑟)ℎ
Total surface area = (Area of curved surface) + 2(Area of each end)
= 2𝜋 (𝑅 + 𝑟)ℎ + (𝜋𝑅2 − 𝜋𝑟 2 )
7. If r, h and l respectively denote the radius, height and slant height of a right circular
cone, then:
Slant height (ℓ) =√ℎ2 +𝑟 2
Area of curved surface = 𝜋rℓ = 𝜋r√ℎ2 +𝑟 2
Total surface area = Area of curved surface + Area of base = 𝜋rℓ + 𝜋𝑟 2 = 𝜋r(ℓ + r)
(4)
SURFACE AREAS AND VOLUMES
13
1
Volume = 𝜋𝑟 2 ℎ
3
(5)
SURFACE AREAS AND VOLUMES
13
(6)
SURFACE AREAS AND VOLUMES
13
Example: A solid is in the shape of a cone standing on a hemisphere with both their radii
being equal to 3 cm and the height of the cone is equal to 5 cm.
This can be visualised as follows:
(7)
SURFACE AREAS AND VOLUMES
13
(8)
SURFACE AREAS AND VOLUMES
13
If a right circular cone is sliced by a plane parallel to its base, then the part with the two
circular bases is called a Frustum.
(9)
SURFACE AREAS AND VOLUMES
13
(10)
SURFACE AREAS AND VOLUMES
13
Important Questions
Multiple Choice questions-
1. If the surface areas of two spheres are in ratio 16 : 9, then their volumes will be in
the ratio:
(a) 27 : 64
(b) 64 : 27
(c) 4 : 3
(d) 3 : 4
2. A cylinder, a cone and a hemisphere are of equal base and have the same height.
What is the ratio of their volumes?
(a) 3 : 1 : 2
(b) 3 : 2 : 1
(c) 1 : 2 : 3
(d) 1 : 3 : 2
3. If the area of three adjacent faces of cuboid are X, Y and Z respectively, then the
volume of cuboid is:
(a) XYZ
(b) 3XYZ
(c) √𝑥𝑦𝑧
(d) √3𝑥𝑦𝑧
4. The volumes of two spheres are in the ratio 27 : 8. The ratio of their curved surface
is:
(a) 9 : 4
(b) 4 : 9
(c) 3 : 2
(d) 2 : 3
(11)
SURFACE AREAS AND VOLUMES
13
5. The ratio of the volumes of two spheres is 8 : 27. If r and R are the radii of spheres
respectively, then (R – r): r is:
(a) 1 : 2
(b) 1 : 3
(c) 2 : 3
(d) 4 : 9
6. The radii of two cylinders are in the ratio 2 : 3 and their heights are in the ratio 5 : 3.
The ratio of their volumes is:
(a) 27 : 20
(b) 20 : 27
(c) 9 : 4
(d) 4 : 9
7. If the radius of base of a right circular cylinder is halved, keeping the height same,
the ratio of the volume of the reduced cylinder to that of the original cylinder is:
(a) 2 : 3
(b) 3 : 4
(c) 1 : 4
(d) 4 : 1
8. If the volumes of a cube is 1728 cm³, the length of its edge is equal to:
(a) 7 cm
(b) 12 cm
(c) 18 cm
(d) 19 cm
9. The volume (in cm³) of the largest right circular cone that can be cut off from a cube
of edge 4.2 cm is: .
(a) 9.7
(b) 72.6
(12)
SURFACE AREAS AND VOLUMES
13
(c) 58.2
(d) 19.4
10. The circumference of the edge of hemispherical bowl is 132 cm. When π is taken
22
as , the capacity of bowl in cm³ is:
7
(a) 2772
(b) 924
(c) 19404
(d) 9702
2. A solid cone of radius r and height h is placed over a solid cylinder having
same base radius and height as that of a cone. What is the total surface
area of the combined solid?
4. A solid ball is exactly fitted inside the cubical box of side a. What is the
volume of the ball?
5. If two cubes of edge 5 cm each are joined end to end, find the surface area
of the resulting cuboid.
(13)
SURFACE AREAS AND VOLUMES
13
the bricks each of size 22.5 cm × 11.25 cm × 8.75 cm and it is assumed that
space is covered by the mortar. Find the number of bricks used to construct
the wall.
9. Volume and surface area of a solid hemisphere are numerically equal. What
is the diameter of hemisphere?
10. A cone, a hemisphere and a cylinder stand on equal bases and have the
same height. What is the ratio of their volumes?
Short Questions :
1. What is the ratio of the volume of a cube to that of a sphere which will fit inside
it?
2. The slant height of the frustum of a cone is 5 cm. If the difference between the
radii of its two circular ends is 4 cm, find the height of the frustum.
3. If the slant height of the frustum of a cone is 10 cm and the perimeters of its
circular base are 18 cm and 28 cm respectively. What is the curved surface area
of the frustum?
6. Two cubes each of volume 64 cm3 are joined end to end. Find the surface area
of the resulting cuboid.
8. The dimensions of a solid iron cuboid are 4.4 m × 2.6 m × 1.0 m. It is melted and
recast into a hollow cylindrical pipe of 30 cm inner radius and thickness 5 cm.
Find the length of the pipe.
(14)
SURFACE AREAS AND VOLUMES
13
OR
10. A hemispherical depression is cut out from one face of a cubical wooden block
such that the diameter l of the hemisphere is equal to the edge of the cube.
Determine the surface area of the remaining solid.
Long Questions :
1. A solid is in the shape of a cone standing on a hemisphere with both their radii
being equal to 7 cm and the height of the cone is equal to its diameter. Find
22
the volume of the solid. (Use π = )
7
25
2. A hemispherical tank, full of water, is emptied by a pipe at the rate of litres
7
per sec. How much time will it take to empty half the tank if the diameter of
the base of the tank is 3 m?
4. 150 spherical marbles, each of diameter 1.4 cm, are dropped in a cylindrical
vessel of diameter 7 cm containing some water, which are completely
immersed in water. Find the rise in the level of water in the vessel.
5. From a solid cylinder of height 2.8 cm and diameter 4.2 cm, a conical cavity of
the same height and same diameter is hollowed out. Find the total surface
22
area of the remaining solid. (Take π = )
7
(15)
SURFACE AREAS AND VOLUMES
13
i. Find the curved surface area of two identical cylindrical parts, if the diameter is
2.5cm and length of each part is 5cm.
a. 475cm2
b. 78.57cm2
c. 877cm2
d. 259.19cm2
190.93cm3
75cm3
77cm3
83.5cm3
4.75cm3
8.18cm3
2.76cm3
75cm3
17.5cm2
7.9cm2
19.64cm2
15.5cm2
(16)
SURFACE AREAS AND VOLUMES
13
v. Find the difference of volumes of bigger cylindrical part and total volume of the
two small hemispherical ends.
175.50cm3
182.75cm3
76.85cm3
96cm3
2. Isha's father brought an ice-cream brick, empty cones and scoop to pour the ice-cream
into cones for all the family members. Dimensions of the ice-cream brick are (30 × 25 ×
10)cm? and radius of hemi-spherical scoop is 3.5cm. Also, the radius and height of cone
are 3.5cm and 15cm respectively.
a. 3
b. 7.5
c. 2.5
d. 4.5
a. 40.6cm3
b. 2509cm3
c. 89.83cm3
d. 20cm3
(17)
SURFACE AREAS AND VOLUMES
13
iii. Volume of a cone is:
a. 148cm3
b. 250.05cm3
c. 145.83cm3
d. 192.5cm3
iv. The minimum number of scoops required to fill one cone up to brim is:
a. 2
b. 3
c. 4
d. 5
v. The number of cones that can be filled up to brim using the whole brick is:
a. 15
b. 39
c. 40
d. 42
Assertion: If diameter of a sphere is decreased by 25%, then its curved surface area is
decreased by 43.75%.
(18)
SURFACE AREAS AND VOLUMES
13
(b) Both A and R are true and R is not the correct explanation of A.
(c) A is true but R is false.
(d) Both A and R is false.
Answer Key-
Multiple Choice questions-
1. (b) 64 : 27
2. (a) 3 : 1 : 2
3. (c) √𝑥𝑦𝑧
4. (a) 9 : 4
5. (a) 1 : 2
6. (b) 20 : 27
7. (c) 1 : 4
8. (b) 12 cm
9. (d) 19.
(19)
SURFACE AREAS AND VOLUMES
13
= curved surface area of cone + curved surface area of cylinder + area of the
base.
3. The resultant solid will be a sphere of radius r whose total surface area is 4πr2.
(20)
SURFACE AREAS AND VOLUMES
13
r = 21 cm
7
7. Space occupied with bricks = × volume of the wall
8
7
= × 270 × 300 × 350
8
8.
9. As per question
Short Answer :
1. Let edge of the cube be ‘a’.
Then, diameter of the sphere that will fit inside the given cube = a
2. Let r and R be radii of the circular ends of the frustum of the cone.
Then, R – r = 4, l = 5
We know, l2 = (R – r)2 + h2
(21)
SURFACE AREAS AND VOLUMES
13
⇒ 52 = 42 + h2 or h2 = 25 – 16 = 9
⇒ h = 3 cm
3. Let r and R be the radii of the two circular ends of the frustum of the cone.
4.
Let R and r be the radii of two circular ends respectively. Therefore, we have
⇒ 2πR = 18 = πR = 9
⇒ 2πr = 6 = πr = 3
= (9 + 3) × 4 = 12 × 4 = 48 cm2
5.
(22)
SURFACE AREAS AND VOLUMES
13
= Curved surface area of the cylindrical part + Curved surface area of
hemispherical part = (2πrh + 2πr2) = 2πr (h + r)
22
=2× × 7 (6 + 7)
7
= 2 × 22 × 13 = 572 cm2
6.
Let the length of each edge of the cube of volume 64 cm3 be x cm.
⇒ x2 = 64
⇒ x2 = 43
⇒ x = 4 cm
l = Length = (4 + 4) cm = 8 cm
= 2 (8 × 4 + 4 × 4 + 8 × 4)
= 2 (32 + 16 + 32)
= 160 cm2
(23)
SURFACE AREAS AND VOLUMES
13
9.
We have,
Let r be the radius of the base of cone and h be the height of conical part of the
toy.
Then, r = OB = 3.5 cm
h = OC = CD – OD = (15.5 – 3.5) cm = 12 cm
(24)
SURFACE AREAS AND VOLUMES
13
∴ Surface area of the remaining solid after cutting out the hemispherical
Long Answer :
1. Radius, r = 7 cm
2.
(25)
SURFACE AREAS AND VOLUMES
13
3. Radius of tank, r1 = 40 cm
2
Internal radius of cylindrical pipe, r2 = = 1 cm
2
= 40 × 60 × 30 = 72,000 cm
4.
(26)
SURFACE AREAS AND VOLUMES
13
5.
(27)
SURFACE AREAS AND VOLUMES
13
2. Answer:
(28)
SURFACE AREAS AND VOLUMES
13
(29)
SURFACE AREAS AND VOLUMES
13
(30)