STRUCTURAL

SHAPES
AVAILABLE INVENTORY

CUSTOM
PROFILES
INFINITE SOLUTIONS
Disclaimer:
All information in this catalog is given to the best of our knowledge and understanding.
Stainless Structurals is not responsible for the use of this product data.
We reserve the right to change or modify as needed without prior warning.

General Terms & Conditions can be found at www.stainless-structurals.com

Stainless Structurals America
Any duplication, even partial of the content of this information is prohibited.
PRODUCT CATALOG
 STAINLESS STEEL

EQUAL LEG ANGLES

Leg 1 Leg 2
tw tw Shape
h tw b tf
Cold Drawn Bright Surface 304/L
h h
EA 15x15x3 0.59 0.118 0.59 0.118
tf tf EA 25x25x3 0.98 0.118 0.98 0.118

EA 30x30x3 1.18 0.118 1.18 0.118

b b EA 40x40x3 1.57 0.118 1.57 0.118

HOT ROLLED LASER WELDED EA 50x50x3 1.97 0.118 1.97 0.118

-
COLD DRAWN Laser Welded
EA 5x5x1/4 5 0.25 5 0.25
Leg 1 Leg 2 EA 5x5x3/8 5 0.375 5 0.375
Shape
h tw b tf EA 5x5x1/2 5 0.5 5 0.5

Hot Rolled EA 6x6x1/4 6 0.25 6 0.25

EA 1/2x1/2x1/8 0.5 0.125 0.5 0.125 EA 6x6x3/8 6 0.375 6 0.375

EA 2X2X1/4 2 0.25 2 0.25 EA 6x6x1/2 6 0.5 6 0.5

EA 2X2X3/8 2 0.375 2 0.375 EA 8x8x3/8 8 0.375 8 0.375

EA 2-1/2×2-1/2×1/4 2.5 0.25 2.5 0.25 EA 8x8x1/2 8 0.5 8 0.5

EA 3X3X1/4 3 0.25 3 0.25 Duplex 2205 Laser Welded

EA 3X3X3/8 3 0.375 3 0.375 EA 2x2x1/4 2 0.25 2 0.25

EA 4X4X1/4 4 0.25 4 0.25 EA 3x3x1/4 3 0.25 3 0.25

EA 4X4X3/8 4 0.375 4 0.375 EA 3x3x3/8 3 0.375 3 0.375

EA 4X4X1/2 4 0.5 4 0.5 EA 4x4x1/4 3 0.25 4 0.25

EA 4x4x3/8 3 0.375 4 0.375

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

STAINLESS STEEL

UNEQUAL LEG ANGLES

Leg 1 Leg 2
tw tw Shape
h tw b tf
Hot Rolled
h h
UA 2x1x1/4 2 0.25 1 0.25
tf tf UA 3x1-1/2x1/4 3 0.25 1.5 0.25

UA 3x2x3/16 3 0.187 2 0.187

b b UA 3x2x1/4 3 0.25 2 0.25

HOT ROLLED LASER WELDED UA 3x2x3 /8 3 0.375 2 0.375

UA 4x3x1/4 4 0.25 3 0.25

UA 4x3x3/8 4 0.375 3 0.375

UA 5x3x1/4 5 0.25 3 0.25

UA 5x3x3/8 5 0.375 3 0.375

UA 6x3x3/8 6 0.375 3 0.375

UA 6x4x3/8 6 0.375 4 0.375

UA 6x4x1/2 6 0.5 4 0.5

Laser Welded
UA 6x3x1/4 6 0.25 3 0.25

UA 6x4x1/4 6 0.25 4 0.25

UA 8x4x1/4 8 0.25 4 0.25

UA 8x4x3/8 8 0.375 4 0.375

UA 8x4x1/2 8 0.375 4 0.375

UA 8x6x3/8 8 0.375 6 0.375

UA 8x6x1/2 8 0.5 6 0.5

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

STANDARD BEAMS

Leg 1 Leg 2
Shape
h tw b tf
tw tw
Hot Rolled or Extruded (Tapered)
h h
S 3x5.7 3 0.17 2.33 0.26
tf tf S 4x7.7 4 0.193 2.66 0.293

S 5x10 5 0.214 3 0.326

b b S 6x12.5 6 0.232 3.33 0.359

HOT ROLLED LASER WELDED Laser Welded

S 3x7.50 3 0.349 2.51 0.26

S 4x9.50 4 0.326 2.8 0.293

S 6x17.25 6 0.465 3.57 0.359

S 8x18.4 8 0.271 4 0.425

S 8x23 8 0.441 4.17 0.425

S 10x25.4 10 0.311 4.66 0.491

S 10x35.0 10 0.594 4.94 0.491

S 12x31.8 12 0.35 5 0.544

S 12x35.0 12 0.428 5.08 0.544

S 12x40.8 12 0.462 5.25 0.659

S 12x50.0 12 0.687 5.48 0.659

S 15x42.9 15 0.411 5.5 0.622

S 15x50.0 15 0.55 5.64 0.622

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

WIDE FLANGE BEAMS

Web Flange
Shape
h tw b tf
tw
Laser Welded
h
W 8x24 7.93 0.245 6.5 0.4
tf W 8x28 8.06 0.285 6.54 0.465

W 8x31 8 0.285 8 0.435

b W 8x35 8.12 0.31 8.02 0.495

LASER WELDED W 8x40 8.25 0.36 8.07 0.56

W 8x48 8.5 0.4 8.11 0.685

Web Flange W 8x58 8.75 0.51 8.22 0.81
Shape
h tw b tf W 8x67 9 0.57 8.28 0.935

Laser Welded W 10x12 9.87 0.19 3.96 0.21

W 4x13 4.16 0.28 4.06 0.345 W 10x15 9.99 0.23 4 0.27

W 5x16 5.01 0.24 5 0.36 W 10x17 10.11 0.24 4.01 0.33

W 5x19 5.15 0.27 5.03 0.43 W 10x19 10.24 0.25 4.02 0.395

W 6x9 5.9 0.17 3.94 0.215 W 10x22 10.17 0.24 5.75 0.36

W 6x12 6.03 0.23 4 0.28 W 10x26 10.33 0.26 5.77 0.44

W 6x15 5.99 0.23 5.99 0.26 W 10x30 10.47 0.3 5.81 0.51

W 6x16 6.28 0.26 4.03 0.405 W 10x33 9.73 0.29 7.96 0.435

W 6x20 6.20 0.26 6.02 0.365 W 10x39 9.92 0.315 7.99 0.53

W 6x25 6.38 0.32 6.08 0.455 W 10x45 10.1 0.35 8.02 0.62

W 8x10 7.89 0.17 3.94 0.205 W 10x49 9.98 0.34 10 0.56

W 8x13 7.99 0.23 4 0.255 W 10x54 10.09 0.37 10.03 0.615

W 8x15 8.11 0.245 4.02 0.315 W 10x60 10.22 0.42 10.08 0.68

W 8x18 8.14 0.23 5.25 0.33 W 10x68 10.4 0.47 10.13 0.77

W 8x21 8.28 0.25 5.27 0.4 W 10x77 10.6 0.53 10.19 0.87

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

WIDE FLANGE BEAMS

Web Flange
Shape
h tw b tf
tw
Laser Welded
h
W 12x72 12.25 0.43 12.04 0.67
tf W 12x79 12.38 0.47 12.08 0.735

W 12x87 12.53 0.515 12.13 0.81

b W 12x96 12.71 0.55 12.16 0.9

LASER WELDED W 12x106 12.89 0.61 12.22 0.99

W 14x22 13.74 0.23 5 0.335

Web Flange W 14x26 13.91 0.255 5.03 0.42
Shape
h tw b tf W 14x30 13.84 0.27 6.73 0.385

Laser Welded W 14x34 13.98 0.285 6.75 0.455

W 10x88 10.84 0.605 10.27 0.99 W 14x38 14.1 0.31 6.77 0.515

W 12x14 11.91 0.2 3.97 0.225 W 14x43 13.66 0.305 8 0.53

W 12x16 11.99 0.22 3.99 0.265 W 14x48 13.79 0.34 8.03 0.595

W 12x19 12.16 0.235 4.01 0.35 W 14x53 13.92 0.37 8.06 0.66

W 12x22 12.31 0.26 4.03 0.425 W 14x61 13.89 0.375 10 0.645

W 12x26 12.22 0.23 6.49 0.38 W 14x68 14.04 0.415 10.04 0.72

W 12x30 12.34 0.26 6.52 0.44 W 14x74 14.17 0.45 10.07 0.785

W 12x35 12.5 0.3 6.56 0.52 W 14x82 14.31 0.51 10.13 0.855

W 12x40 11.94 0.295 8.01 0.515 W 14x90 14.02 0.44 14.52 0.71

W 12x45 12.06 0.335 8.05 0.575 W 14x99 14.16 0.485 14.57 0.78

W 12x50 12.19 0.37 8.08 0.64 W 14x109 14.32 0.525 14.61 0.86

W 12x53 12.06 0.345 10 0.575 W 14x120 14.48 0.59 14.67 0.94

W 12x58 12.19 0.36 10.01 0.64 W 16x26 15.69 0.25 5.5 0.345

W 12x65 12.12 0.39 12 0.605 W 16x31 15.88 0.275 5.53 0.44

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

WIDE FLANGE BEAMS

Web Flange Web Flange

Shape Shape
h tw b tf h tw b tf
Laser Welded Laser Welded
W 16x36 15.86 0.295 6.99 0.43 W 21x57 21.06 0.405 6.56 0.65

W 16x40 16.01 0.305 7 0.505 W 21x62 20.99 0.4 8.24 0.615

W 16x45 16.13 0.345 7.04 0.565 W 21x68 21.13 0.43 8.27 0.685

W 16x50 16.26 0.38 7.07 0.63 W 21x73 21.24 0.455 8.3 0.74

W 16x57 16.43 0.43 7.12 0.715 W 21x83 21.43 0.515 8.36 0.835

W 16x67 16.33 0.395 10.24 0.665 W 21x93 21.62 0.58 8.42 0.93

W 16x77 16.52 0.455 10.3 0.76 W 21x101 21.36 0.5 12.29 0.8

W 16x89 16.75 0.525 10.37 0.875 W 21x111 21.51 0.55 12.34 0.875

W 16x100 16.97 0.585 10.43 0.985 W 21x122 21.68 0.6 12.39 0.96

W 18x35 17.7 0.3 6 0.425 W 24x55 23.57 0.395 7.01 0.505

W 18x40 17.9 0.315 6.02 0.525 W 24x62 23.74 0.43 7.04 0.59

W 18x46 18.06 0.36 6.06 0.605 W 24x68 23.73 0.415 8.97 0.585

W 18x50 17.99 0.355 7.5 0.57 W 24x76 23.92 0.44 8.99 0.68

W 18x55 18.11 0.39 7.53 0.63 W 24x84 24.1 0.47 9.02 0.77

W 18x60 18.24 0.415 7.56 0.695 W 24x94 24.31 0.515 9.07 0.875

W 18x65 18.35 0.45 7.59 0.75 W 24x104 24.06 0.5 12.75 0.75

W 18x71 18.47 0.495 7.64 0.81 W 24x117 24.26 0.55 12.8 0.85

W 18x76 18.21 0.425 11.04 0.68 W 24x131 24.48 0.605 12.86 0.96

W 18x86 18.39 0.48 11.09 0.77

W 18x97 18.59 0.535 11.15 0.87

W 18x106 18.73 0.59 11.2 0.94

W 21x44 20.66 0.35 6.5 0.45

W 21x50 20.83 0.38 6.53 0.535

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

STANDARD CHANNELS

Web Flange
Shape
tw tw h tw b tf
Laser Welded
h h
C 5x9.0 5 0.325 1.89 0.32
tf tf C 6x8.2 6 0.2 1.92 0.343

C 6x10.5 6 0.314 2.03 0.343

b b C 6x13.0 6 0.437 2.16 0.343

HOT ROLLED LASER WELDED C 7x9.8 7 0.21 2.09 0.366

C 7x12.25 7 0.314 2.19 0.366

Web Flange C 7x14.75 7 0.419 2.3 0.366
Shape
h tw b tf C 8x11.5 8 0.22 2.26 0.39
Hot Rolled (Tapered) C 8x13.75 8 0.303 2.34 0.39
C 3x4.1 3 0.17 1.41 0.273 C 8x18.75 8 0.487 2.53 0.39
C 4x5.4 4 0.184 1.58 0.296 C 9x13.4 9 0.233 2.43 0.413
C 4x7.25 4 0.321 1.72 0.296 C 9x15.0 9 0.285 2.49 0.413
C 5x6.7 5 0.19 1.75 0.32 C 9x20.0 9 0.448 2.65 0.413
C 5x9.0 5 0.325 1.89 0.32 C 10x15.3 10 0.24 2.6 0.436
C 6x8.2 6 0.2 1.92 0.343 C 10x20.0 10 0.379 2.74 0.436
C 6x10.5 6 0.314 2.03 0.343 C 10x25.0 10 0.526 2.89 0.436

Laser Welded C 10x30.0 10 0.673 3.03 0.436

C 3x4.1 3 0.17 1.41 0.273 C 12x20.7 12 0.282 2.94 0.501

C 3x5.0 3 0.258 1.5 0.273 C 12x25.0 12 0.387 3.05 0.501

C 3x6.0 3 0.356 1.6 0.273 C 12x30.0 12 0.51 3.17 0.501

C 4x5.4 4 0.184 1.58 0.296 C 15x33.9 15 0.4 3.4 0.65

C 4x7.25 4 0.321 1.72 0.296 C 15x40.0 15 0.52 3.52 0.65

C 5x6.7 5 0.19 1.75 0.32 C 15x50.0 15 0.716 3.72 0.65

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

BAR CHANNELS

Web Flange
Shape
tw tw h tw b tf
Hot Rolled (Tapered)
h h
BC 1x1/2x1/8 1 0.125 0.5 0.125
tf tf BC 1-1/4x1/2x1/8 1.25 0.125 0.5 0.125

BC 1-1/2x1/2x1/8 1.5 0.125 0.5 0.125

b b BC 1-1/2x3/4x1/8 1.5 0.125 0.75 0.125

HOT ROLLED HOT ROLLED Hot Rolled (Non Tapered)

BC 2x1x1/8 2 0.125 1 0.125

BC 2x1x3/16 2 0.1875 1 0.1875

BC 2x1x1/4 2 0.25 1 0.25

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

MISCELLANEOUS CHANNELS

Web Flange
Shape
tw tw h tw b tf
Hot Rolled (Non Tapered)
h h
MC 3x1-3/8x3/16 3 0.1875 1.38 0.1875
tf tf MC 3x1-1/2x3/16 3 0.1875 1.5 0.1875

MC 3x1-1/2x1/4 3 0.25 1.5 0.25

b b MC 4x1-3/4x1/4 4 0.25 1.75 0.25

HOT ROLLED LASER WELDED MC 4x2x1/4 4 0.25 2 0.25

Laser Welded
MC 6x3x1/4 6 0.25 3 0.25

MC 6x3x3/8 6 0.375 3 0.375

MC 6x12 6 0.31 2.5 0.375

MC 6x15.3 6 0.34 3.5 0.385

MC 8x4x1/4 8 0.25 4 0.25

MC 8x4x3/8 8 0.375 4 0.375

MC 8x18.7 8 0.353 2.98 0.5

MC 10x8.4 10 0.17 1.5 0.28

MC 12x10.6 12 0.19 1.5 0.309

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

TEE BARS

Web Flange
Shape
tw tw d tw bf tf
Laser Welded
h h
TB 2x2x1/4 2 0.25 2 0.25
tf tf TB 2-1/2x2-1/2x1/4 2.5 0.25 2.5 0.25

TB 3x3x1/4 3 0.25 3 0.25

b b TB 3x3x3/8 3 0.375 3 0.375

HOT ROLLED LASER WELDED TB 4x4x1/4 4 0.25 4 0.25

TB 4x4x3/8 4 0.375 4 0.375

Web Flange TB 5x5x1/4 5 0.25 5 0.25
Shape
d tw bf tf TB 5x5x3/8 5 0.375 5 0.375
Hot Rolled TB 5x5x1/2 5 0.5 5 0.5
TB 2x2x1/4 2 0.25 2 0.25 TB 6x6x1/4 6 0.25 6 0.25

Laser Welded TB 6x6x3/8 6 0.375 6 0.375

TB 3/4x3/4x3/16 0.75 0.187 0.75 0.187 TB 6x6x1/2 6 0.5 6 0.5

TB 1x1x1/8 1 0.125 1 0.125 TB 7x7x1/4 7 0.25 7 0.25

TB 1x1x3/16 1 0.187 1 0.187 TB 7x7x3/8 7 0.375 7 0.375

TB 1-1/2x1-1/2x3/16 1.5 0.187 1.5 0.187 TB 7x7x1/2 7 0.5 7 0.5

TB 1-1/2x1-1/2x1/4 1.5 0.25 1.5 0.25 TB 8x8x1/4 8 0.25 8 0.25

TB 1-3/4x1-3/4x3/16 1.75 0.187 1.75 0.187 TB 8x8x3/8 8 0.375 8 0.375

TB 2x2x3/16 2 0.187 2 0.187 TB 8x8x1/2 8 0 8 0.5

S I Z E S L I S T E D A B O V E A R E S TA N D A R D S T O C K S I Z E S . C U S T O M S I Z E S AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

TEES WT

Web Flange
Shape
h tw b tf
Laser Welded
WT 4×14 4.03 0.285 6.54 0.465
h tw
tf WT 4×7.5 4.05 0.245 4.01 0.315

WT 4×17.5 4.06 0.31 8.02 0.495

b WT 4×9 4.07 0.23 5.25 0.33

LASER WELDED WT 4×20 4.13 0.36 8.07 0.56

WT 4×10.5 4.14 0.25 5.27 0.4

Web Flange WT 4×24 4.25 0.4 8.11 0.685
Shape
h tw b tf WT 4×29 4.38 0.51 8.22 0.81

Laser Welded WT 4×33.5 4.5 0.57 8.28 0.935

WT 2×6.5 2.08 0.28 4.06 0.345 WT 5×16.5 4.87 0.29 7.96 0.435

WT 2.5×8 2.51 0.24 5 0.36 WT 5×6 4.93 0.19 3.96 0.21

WT 2.5×9.5 2.58 0.27 5.03 0.43 WT 5×19.5 4.96 0.315 7.99 0.53

WT 3×4.25 2.92 0.17 3.94 0.194 WT 5×24.5 4.99 0.34 10 0.56

WT 3×4.5 2.95 0.17 3.94 0.215 WT 5×7.5 5 0.23 4 0.27

WT 3×7.5 3 0.23 5.99 0.26 WT 5×8.5 5.05 0.24 4.01 0.33

WT 3×6 3.02 0.23 4 0.28 WT 5×22.5 5.05 0.35 8.02 0.62

WT 3×10 3.1 0.26 6.02 0.365 WT 5×27 5.05 0.37 10 0.615

WT 3×8 3.14 0.26 4.03 0.405 WT 5×11 5.09 0.24 5.75 0.36

WT 3×12.5 3.19 0.32 6.08 0.455 WT 5×30 5.11 0.42 10.1 0.68

WT 4×5 3.95 0.17 3.94 0.205 WT 5×9.5 5.12 0.25 4.02 0.395

WT 4×12 3.97 0.245 6.5 0.4 WT 5×13 5.17 0.26 5.77 0.44

WT 4×6.5 4 0.23 4 0.255 WT 5×34 5.2 0.47 10.1 0.77

WT 4×15.5 4 0.285 8 0.435 WT 5×15 5.24 0.3 5.81 0.51

W T S I Z E S A B O V E A R E AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

TEES WT

Web Flange Web Flange

Shape Shape
h tw b tf h tw b tf
Laser Welded Laser Welded
WT 5×38.5 5.3 0.53 10.2 0.87 WT 7×21.5 6.83 0.305 8 0.53

WT 5×44 5.42 0.605 10.3 0.99 WT 7×11 6.87 0.23 5 0.335

WT 5×50 5.55 0.68 10.3 1.12 WT 7×24 6.9 0.34 8.03 0.595

WT 6×7 5.96 0.2 3.97 0.225 WT 7×15 6.92 0.27 6.73 0.385

WT 6×20 5.97 0.295 8.01 0.515 WT 7×30.5 6.95 0.375 9.99 0.645

WT 6×8 6 0.22 3.99 0.265 WT 7×13 6.96 0.255 5.03 0.42

WT 6×22.5 6.03 0.335 8.05 0.575 WT 7×26.5 6.96 0.37 8.06 0.66

WT 6×26.5 6.03 0.345 9.99 0.575 WT 7×17 6.99 0.285 6.75 0.455

WT 6×32.5 6.06 0.39 12 0.605 WT 7×45 7.01 0.44 14.5 0.71

WT 6×9.5 6.08 0.235 4.01 0.35 WT 7×34 7.02 0.415 10 0.72

WT 6×25 6.1 0.37 8.08 0.64 WT 7×19 7.05 0.31 6.77 0.515

WT 6×29 6.1 0.36 10 0.64 WT 7×49.5 7.08 0.485 14.6 0.78

WT 6×13 6.11 0.23 6.49 0.38 WT 7×37 7.09 0.45 10.1 0.785

WT 6×36 6.13 0.43 12 0.67 WT 7×41 7.16 0.51 10.1 0.855

WT 6×11 6.16 0.26 4.03 0.425 WT 7×54.5 7.16 0.525 14.6 0.86

WT 6×15 6.17 0.26 6.52 0.44 WT 7×60 7.24 0.59 14.7 0.94

WT 6×39.5 6.19 0.47 12.1 0.735 WT 7×66 7.33 0.645 14.7 1.03

WT 6×17.5 6.25 0.3 6.56 0.52 WT 7×72.5 7.39 0.68 15.5 1.09

WT 6×43.5 6.27 0.515 12.1 0.81 WT 7×79.5 7.49 0.745 15.6 1.19

WT 6×48 6.36 0.55 12.2 0.9 WT 8×13 7.85 0.25 5.5 0.345

WT 6×53 6.45 0.61 12.2 0.99 WT 7×79.5 7.49 0.745 15.6 1.19

WT 6×60 6.56 0.71 12.3 1.11 WT 8×18 7.93 0.295 6.99 0.43

WT 6×68 6.71 0.79 12.4 1.25 WT 8×15.5 7.94 0.275 5.53 0.44

W T S I Z E S A B O V E A R E AVA I L A B L E U P O N R E Q U E S T.
 STAINLESS STEEL

TEES WT

Web Flange
Shape
h tw b tf
Laser Welded
WT 9×32.5 9.18 0.45 7.59 0.75
h tw
tf WT 9×35.5 9.23 0.495 7.64 0.81

WT 9×38 9.11 0.425 11 0.68

b WT 9×43 9.2 0.48 11.1 0.77

LASER WELDED WT 9×48.5 9.3 0.535 11.1 0.87

WT 9×53 9.37 0.59 11.2 0.94

Web Flange WT 9×59.5 9.48 0.655 11.3 1.06
Shape
h tw b tf WT 9×65 9.63 0.67 11.2 1.2

Laser Welded WT 10.5×22 10.3 0.35 6.5 0.45

WT 8×20 8.01 0.305 7 0.505 WT 10.5×24 10.3 0.35 8.14 0.43

WY 8×22.5 8.07 0.345 7.04 0.565 WT 10.5×25 10.4 0.38 6.53 0.535

WT 8×25 8.13 0.38 7.07 0.63 WT 10.5×27.5 10.4 0.375 8.22 0.522

WT 8×33.5 8.16 0.395 10.2 0.665 WT 10.5×28.5 10.5 0.405 6.56 0.65

WT 8×28.5 8.22 0.43 7.12 0.715 WT 10.5×31 10.5 0.4 8.24 0.615

WT 8×38.5 8.26 0.455 10.3 0.76 WT 10.5×34 10.6 0.43 8.27 0.685

WT 8×44.5 8.38 0.525 10.4 0.875 WT 10.5×36.5 10.6 0.455 8.3 0.74

WT 8×50 8.48 0.585 10.4 0.985 WT 10.5×41.5 10.7 0.515 8.36 0.835

WT 9×17.5 8.85 0.3 6 0.425 WT 10.5×50.5 10.7 0.5 12.3 0.8

WT 9×20 8.95 0.315 6.02 0.525 WT 10.5×46.5 10.8 0.58 8.42 0.93

WT 9×25 8.99 0.355 7.5 0.57 WT 10.5×55.5 10.8 0.55 12.3 0.875

WT 9×23 9.03 0.36 6.06 0.605 WT 10.5×61 10.8 0.6 12.4 0.96

WT 9×27.5 9.06 0.39 7.53 0.63 WT 10.5×66 10.9 0.65 12.4 1.03

WT 9×30 9.12 0.415 7.56 0.695 WT 10.5×73.5 11 0.72 12.5 1.15

W T S I Z E S A B O V E A R E AVA I L A B L E U P O N R E Q U E S T.
STAINLESS STEEL

TEES WT

Web Flange Web Flange

Shape Shape
h tw b tf h tw b tf
Laser Welded Laser Welded
WT 12×27.5 11.8 0.395 7.01 0.505 WT 15×58 15 0.565 10.5 0.85

WT 12×31 11.9 0.43 7.04 0.59 WT 15×62 15.1 0.585 10.5 0.93

WT 12×34 11.9 0.415 8.97 0.585 WT 15×66 15.2 0.615 10.5 1

WT 12×38 12 0.44 8.99 0.68 WT 15×86.5 15.2 0.655 15 1.07

WT 12×52 12 0.5 12.8 0.75 WT 15×74 15.3 0.65 10.5 1.18

WT 12×42 12.1 0.47 9.02 0.77 WT 15×95.5 15.3 0.71 15 1.19

WT 12×58.5 12.1 0.55 12.8 0.85 WT 16.5×59 16.4 0.55 11.5 0.74

WT 12×47 12.2 0.515 9.07 0.875 WT 16.5×65 16.5 0.58 11.5 0.855

WT 12×65.5 12.2 0.605 12.9 0.96 WT 16.5×70.5 16.7 0.605 11.5 0.96

WT 12×51.5 12.3 0.55 9 0.98 WT 16.5×76 16.7 0.635 11.6 1.06

WT 12×73 12.4 0.65 12.9 1.09 WT 16.5×100.5 16.8 0.715 15.7 1.15

WT 12×81 12.5 0.705 13 1.22 WT 16.5×84.5 16.9 0.67 11.5 1.22

WT 13.5×42 13.4 0.46 9.96 0.64 WT 18×67.5 17.8 0.6 12 0.79

WT 13.5×47 13.5 0.49 9.99 0.745 WT 18×75 17.9 0.625 12 0.94

WT 13.5×51 13.5 0.515 10 0.83 WT 18×80 18 0.65 12 1.02

WT 13.5×57 13.6 0.57 10.1 0.93 WT 18×85 18.1 0.68 12 1.1

WT 13.5×73 13.7 0.605 14 0.975 WT 18×91 18.2 0.725 12.1 1.18

WT 13.5×64.5 13.8 0.61 10 1.1 WT 20×74.5 19.1 0.63 11.8 0.83

WT 13.5×80.5 13.8 0.66 14 1.08 WT 20×83.5 19.3 0.65 11.8 1.02

WT 13.5×89 13.9 0.725 14.1 1.19 WT 20×99.5 19.3 0.65 15.8 1.07

WT 15×45 14.8 0.47 10.4 0.61 WT 20×91.5 19.5 0.65 11.8 1.22

WT 15×49.5 14.8 0.52 10.5 0.67 WT 20×107.5 19.5 0.65 15.8 1.22

WT 15×54 14.9 0.545 10.5 0.76 WT 22×115 21.5 0.71 15.8 1.22

W T S I Z E S A B O V E A R E AVA I L A B L E U P O N R E Q U E S T.
 TECHNICAL CAPABILITIES

We can produce both standard and custom profiles within the following size parameters

Production Parameters
h h b b ID L L. th th
Profiles
min. max. min. max. min. min. max. min. max.
Beams 1 36 0.75 20 1.75 1 720 0.125 1.5

Tees 0.75 36 0.75 20 N/A 1 720 0.125 1.5

Angles 0.75 36 0.75 20 N/A 1 720 0.125 1.5

Channels 0.75 36 0.75 20 0.5 1 720 0.125 1.5

Tubes 0.75 36 0.75 20 1 1 720 0.125 1.5

FOR SIZES OUTSIDE THIS RANGE, PLEASE CONTACT OUR SALES TEAM
FOR FURTHER DISCUSSION ON PROFILE POSSIBILITIES.

CUSTOM STAINLESS TUBES OR ANY OTHER SHAPE

CAN BE MANUFACTURED TO YOUR EXACT SPECIFICATIONS

POSSIBILITIES ARE ENDLESS

S TA I N L E S S S T R U C T U R A L S L L C - 5 7 5 C O N R O E PA R K W E S T D R I V E - C O N R O E , T X 7 7 3 0 3
TECHNICAL CAPABILITIES

Grade

Channels, Tees, Applicable AISI - 304/304L AISI - 316/316L

Beams and Angle Bars Standards UNS - S30400 UNS - S31600

LASER WELDED ASTM A1069 X X

ASTM A276 X X

HOT ROLLED ASTM A479/A479M X X

ASME SA479 X X

Chemical Values (¹ ) (2)

Grade C Si Mn Ni Cr Mo S P N Cu Co
304/304L 0.03 1.0 2.0 8-12 18-20 1.0 0.030 0.045 0.10 1 Report

316/316L 0.03 1.0 2.0 10-14 16-18 2-3 0.030 0.045 0.10 0.75 Report
¹ Maximum values unless shown as a range
( )

² Ti is allowable in amounts up to 0.5%

( )

Minimum Mechanical Properties

Grade T [KSI] YS(¹) [KSI] EL(¹) [%] RA(¹) [%] HB

304/304L
75 30 30 50 140-241
316/316L
¹ Minimum values unless shown as a range
( )

LASER WELDED STANDARDS SPECIFICATION

Designation: A1069-19 Designation: A1123-22

Standard Specification for Standard Specification for
Laser-Welded Laser and Laser-Hybrid
Stainless Steel Bars, Welded Carbon Steel,
Plates, and Shapes Sharp Cornered Profile (SCP),
Built-Up, Square, Rectangular and
Special Shape Tube

STANDARD PRODUCTS CONDITIONS

• Condition: Hot Rolled, Annealed & Pickled
• Laser welded and Hot rolled standard sections are produced according to ASTM A484 tolerances.
• Intergranular corrosion test according to ASTM A262 practices A, C & E (where applicable)
• Material free of contamination from mercury or metals at ambient temperature

S TA I N L E S S S T R U C T U R A L S L L C - 5 7 5 C O N R O E PA R K W E S T D R I V E - C O N R O E , T X 7 7 3 0 3
 FINISHING CAPABILITIES

BEAD BLASTED & PICKLED

Our standard mill finish is created by micro bead blasting and
pickling our laser fused sections and structurals. This finish is
typically non-directional in appearance and has a uniform matte
surface with low reflectivity.

NON - DIRECTIONAL FINISH

Also known as an angel hair, vibration, or random orbital finish; a
non-directional finish has a random orbital appearance as opposed
to a linear brushed finish. Architects favor the non-directional finish
because of its unique appearance and ease of rehabilitation in the
field.

#4 FINISH
A general-purpose, brushed finish imparted by 120-220 grit abrasive
belts. This brushed finish has a linear, directional appearance paral-
lel to the length of the laser fused section.
We offer the following #4 variations:
• Commercial #4 : achieved with abrasive belts through 120 grit
• True #4 : achieved with abrasive belts through 180 grit
• Sanitary #4 (aka Dairy #4) : achieved with abrasive belts through
220 grit
• Common end-uses: architectural, building/construction, manu-
facturing and fabrication.

S TA I N L E S S S T R U C T U R A L S L L C - 5 7 5 C O N R O E PA R K W E S T D R I V E - C O N R O E , T X 7 7 3 0 3
FINISHING CAPABILITIES

#6 FINISH
A finer brushed finish than a #4 finish imparted by 240-320 grit
abrasive belts after successive passes with lower grit abrasive
belts. Like a #4 finish, a #6 finish has a linear, directional
appearance parallel to the length of the laser fused section.
A #6 finish has a lower reflectivity than a #4 finish due to the
finer grit lines imparted by the finer abrasive belts. Common
end-uses: architectural, building/construction, food & beverage,
pharmaceutical, environmental, and chemical.

#8 MIRROR FINISH
The most reflective finish available on our laser fused sections. A #8
mirror finish is achieved through multi-step, successive fine grinding
operations with abrasive belts through 800 grit followed by buffing
operations. The ultimate look is that of a mirror but some underlying grit
lines may be visible upon close inspection on structural products. Since
the underlying grit lines are almost completely removed, there is no
linear or brushed look on the laser fused section’s surface. Architects
commonly request #8 mirror finishes on our laser fused section
because of the finish’s reflectivity, beauty, flexibility, and durability.

RA FINISHES
A Roughness Average (RA) Finish is a specialty finish similar in ap-
pearance to brushed finishes except that RA Finishes are confirmed
by measurement and tooling. RA Finishes can be measured and
certified using a profilometer, which measures the average deviation
of grit lines from an imaginary centerline to determine the surface’s
smoothness. Engineers commonly request RA Finishes on our laser
fused sections because the ultimate finish is not subjective but in-
stead can be confirmed through tooling.
Common end-uses: pharmaceutical, food & beverage, chemical, oil
& gas, and environmental.

S TA I N L E S S S T R U C T U R A L S L L C - 5 7 5 C O N R O E PA R K W E S T D R I V E - C O N R O E , T X 7 7 3 0 3
 FABRICATION

EXAMPLES OF PRODUCED SECTIONS

b= 20“

h= 36“
C U S TO M S E C T I O N S
(A N Y T H I N G T H AT F I T S I N A 20” X 36” R E C TA N G U L A R S H A P E)

EXAMPLES OF PRODUCED SECTIONS

Stainless Steel: 304/304L; 316/316L; 317L; 310S; 309;
Commmonly 321; 410; 2205; 2507; 904L
manufactured grades
Carbon Steel: A36; Gr.50

Lengths 5“ – 600“

Cut-to-length Level I: -0/+4“; Level II: -0/+1“; level III: -0/+0.25”

Holes / Slots Any size, as small as material thickness

Coping / cut outs Drawing assessment needed before confirmation

S TA I N L E S S S T R U C T U R A L S L L C - 5 7 5 C O N R O E PA R K W E S T D R I V E - C O N R O E , T X 7 7 3 0 3
Sustainable Solutions
with Steel Profiles

Virtual Or In-Person
Lunch and Learn

1 AIA Credit

1 HSW Credit

1 PDH Credit

Description:
Sustainability is at the forefront of the architecture, engineering and construction industries.
Material selection is key in not only sustainability, but also social responsibility. Stainless and Carbon Steel
profiles provide sustainable solutions in striking designs in architecturally exposed structures, with a unique
focus on resiliency and durability. This course is designed for architects, engineers, fabricators and metal
enthusiasts. We will go in-depth on the different applications and benefits of using steel and stainless steel
profiles in your designs, with a heavy emphasis on steel production technologies, sustainability, case studies,
and material selection. After completion, designers will know how and why to apply sustainable steel solutions
to their projects.

Learning Objectives:
Overview of the different production methods of steel profiles with an in-depth look at Laser Welding
and how this technology produces carbon & stainless steel profiles for AESS requirements and more.
Review of the available resources to aid in material selection and the specifications for carbon and
stainless steel profiles in sustainable designs.
Summarize the advantages of using steel profiles in your designs regarding sustainability, environmental
benefits, green initiatives, and HSW benefits.
Discuss the different types of carbon and stainless steel alloys and finishes available and look at which
alloys and finishes are best for different environments.
Review of specific case studies showing the sustainable solutions that laser welded steel profiles
provide in architecture, engineering and construction applications.
SUSTAINABLE STEEL SOLUTIONS

Producing and supplying sharp cornered steel structural shapes and custom
profiles for the Architecture, Engineering and Construction industries.

LASER WELDING TECHNOLOGY CUSTOM PROFILES

575 Conroe Park West Drive | Conroe, TX 77303 | Phone 936.538.7600

www.stainless-structurals.com