Sabre Samurai Manual
Sabre Samurai Manual
20
Sabre Samurai – Operator’s Manual
2 19
Sabre Samurai – Operator’s Manual
SAFETY
NOTE:
There is an extra Safety
Decal supplied with the
unit. Affix the decal to
your equipment in a
prominent position.
SAFETY DECAL
Make sure that all moving parts are free of debris before
operating. Check that the Samurai is securely mounted
before operating.
Keep yourself and others well clear of the Samurai while it
is running.
18 3
Sabre Samurai – Operator’s Manual
HYDRAULIC SAFETY
4 17
Sabre Samurai – Operator’s Manual
CUTTERBAR
16 5
Sabre Samurai – Operator’s Manual
IMPORTANT:
If the Samurai is being stored - do
NOT drain the hydraulic fluid from
the motor.
6 15
Sabre Samurai – Operator’s Manual
CUTTERBAR
CAUTION!
Stop the traction unit engine, set the park brake,
and disconnect the hydraulics from the
cutterbar motor before working on the
Samurai. The sickle sections are sharp - wear
heavy gloves when handling the cutterbar.
NOTE:
When replacing knives, use only
correct fasteners. See Parts List.
14 7
Sabre Samurai – Operator’s Manual
IMPORTANT:
Spacer - Knife Guide (part #087) running on
Screw Bearing (part #086) must be checked
Vertical frequently and replaced immediately if worn
or missing to avoid damage to Plate -
Mounting Sliding Cutterbar (part #188).
IMPORTANT:
When tightening hydraulic connections,
always use two wrenches to prevent damage
to hoses and fittings. Tighten fittings only
enough to eliminate leaks. Do NOT over
tighten.
Inverted
8 13
Sabre Samurai – Operator’s Manual
12 9
Sabre Samurai – Operator’s Manual
10 11