Professional Documents
Culture Documents
Analysis of Rate PMGSY Bridge-2021
Analysis of Rate PMGSY Bridge-2021
ANALYSIS OF RATES
2021
PMGSY
BRIDGE WORKS
FOREWORD
Roads arethe lifeline of any economy and a very vital infrastructure for the
rapid economic growth of any State. In fact, the development of important sectors of
economy such as Agriculture, Horticulture, Industry, Mining, Forestry and Tourism
depends upon the availability of a good extensive road network. Activities of social
development such as education, health, food security etc. also depend upon an
efficient road network. So the primary objective and aim of the Public Works
Department is to provide connectivity by way of providing good all weather roads to
all the habitations in the State in addition to meeting adequate standards of comforts
to the road users.
Himachal Pradesh is a hill state and given its difficult terrain, to provide road
connectivity to its people is a challenging task. As per the guidelines of PMGSY,
Himachal Pradesh Public Works Department has taken up this challenge boldly to
prbvide connectivity to the villages by way of constructing good quality of rural roads
connecting distant habitations to the mainstream.
Till now, Schedule of Rates 2016 was in operation in HPPWD for PMGSY
road and bridge works. However, it was decided in the year 2019 to revise the
PMGSY Scheditle of Rates by Ministry of Rural Roads Development, Govt. of India.
Accordingly, a technical committee of PWD officers was constituted and accordingly
Standard Schedule of Rates for PMGSY works has been prepared. This document
will also be extensively used by all the branches of HPPWD and other Govt.
agencies in the State. The basic rates of labour, material and machinery, as
applicable in Himachal Pradesh, have been taken into consideration for the analysis
of different items in this Schedule of Rates.
I wish to place on record the efforts made by HPPWD officers and officials in
bringing out this document in the present form.
Principal Secretary (
to the Govt. of Himaihal Pradesh.
Shimla 171002
PREFACE
Schedule of rates for PMGSY road works was made applicable in Himachal
Pradesh Public Works Department in the year 2016. Since then, there has been
considerable increase in labour wages and cost of materials. This escalation in prices
has been responsible in the ever widening gap between estimated cost and the
actual cost of construction.
The new schedule of rates 2021 is compatible with Book of specification (BOS)
for Rural Roads & Standard Data Book Published by Indian Road Congress.
Though every care has been taken to include all relevant items of the works
of roads and bridges (PMGSY works), however, in case rates for some additional
items of work are required; the same may be derived / analyzed on the basis of
Standard Data Book for PMGSY works and same may be adopted after approval from
the competent authority.
CO N T EN T S
Chapter Description P age
2 Foundation 19 - 224
CHAPTER - A
Rates approved by the Government of Himachal Pradesh vide notification No. Fin-
(PR)B(7)-33/2010 dated 16-04-2021.
1
ANNEXURE-B
USAGE RATES OF PLANT & MACHINERY
Description of machinery Output of Machine Av. Rate
Sr.No. Unit
Machine Activity Unit Output 2021
1 Air Compressor 210 cfm Supplying compressed air cfm 210 per hour 488.00
2 Batch mix HMP 40-60 TPH BM, DBM, SDBC, PM t/h 50 per hour 15000.00
3 Batch type HMP 30/40 TPH BM, DBM, SDBC, PM t/h 35 per hour 14488.00
Bitumen boiler oil fired
9 Electric generator set, 125 KVA Electricity generation KVA 100.00 per hour 1160.00
13 Hydraulic Excavator 0.9 cum Excavation cum/h 100.00 per hour 1080.00
14 Hydraulic self propelled chip
spreader Surface Dressing sqm/h 1500 per hour 1200.00
Pavement breaking &
15 Jack Hammer with tractor cum/h 05. to 1 per hour 700.00
rock drilling
Joint Cutting Machine with 2-3
16 Cutting of Joints h per hour 1227.00
blades
17 Mixall 6-10 t capacity Mixing of bituminous t/h 8.00 per hour 1776.00
materials
200.00 3513.00
18 Motor Grader Scarifier & levelling cum/h per hour
50.00 2318.00
19 Needle vibrator Vibrating cement cum/h 3.50 per hour 100.00
concrete mix
20 Paver finisher Laying/spreading t/h 75.00 per hour 4300.00
21 Plate compactor Compaction cum/h per hour 100.00
22 Plate vibrator Compaction cum/h per hour 100.00
2
Description of machinery Output of Machine Av. Rate
Sr.No. Unit
Machine Activity Unit Output 2021
3
Description of machinery Output of Machine Av. Rate
Sr.No. Unit
Machine Activity Unit Output 2021
4
ANNEXURE-C
BASIC RATES OF MATERIAL
Sr. No. Description Unit Av. Rate
5
Sr. No. Description Unit Av. Rate
6
Sr. No. Description Unit Av. Rate
7
Sr. No. Description Unit Av. Rate
8
Sr. No. Description Unit Av. Rate
119 HDPE pipes 75mm dia including 5 per cent wastage metre 218.00
120 Tube anchorage set complete with bearing plate, permanent wedges
etc each 481.00
121 MS plates for deviator (where deviator blocks are not provided) tonne 58919.00
122 v) Wooden packing cum 60000.00
123 MS Bolt and nuts kg 85.00
124 Polyester trinagular synthetic fibres kg 427.00
125 Galvanised steel wire crates of mesh size 100 mm x 100 mm woven
with 4mm dia. GI wire in rolls of required size. sqm 190.00
126 Permeable synthetic geotextile. sqm 180.00
127 4mm GI wire crates woven in mesh size of 100 mm x 100 mm. sqm 190.00
128 Admixture @ 0.4 per cent of cement kg 160.00
129 H.T. Strand for jacking tonne 138583.00
130 Sheathing duct. metre 245.00
131 i) Bitumen 80/100 or 60/70 or 30/40 tonne 40159.00
132 ii) Crusher stone dust cum 1156.00
133 Lime stone dust filler with calcium carbonate content. tonne 7725.00
134 Pre-coated stone chips of 9.5 mm nominal size. cum 1100.00
135 Corrosion resistant Structural steel including 5 per cent wastage Kg 115.00
136 GI pipe 100mm dia metre 800.00
137 GI bolt 10 mm Dia each 10.00
138 Galvanised MS flat clamp each 180.00
139 LDO for steam curing Litre 60.00
140 Helical pipes 600mm diameter metre 7000.00
141 Tie rods 20mm diameter each 120.00
Galvanised M.S plate 200 mm wide,12 mm thick @ 94.20 kg/sqm
142 kg 80.00
including 5 per cent wastage
143 Copper plate - kg 900.00
144 20 mm thick compressible fibre board 12 m long x 25 cm deep. sqm 500.00
145 Premoulded joint filler 12 m long,20 mm thick and 300 mm deep. sqm 1900.00
147 Polymer modified bitumen kg 61.26
148 Galvanised structural steel plate . kg 110.00
149 Supply of elastomeric slab seal expansion joint assembly manufactured
by using chloroprene, elastomer for elastomeric slab unit conforming to
clause 915.1 of IRC: 83 (part II), complete as per approved drawings metre 8500.00
and standard specification conforming to clause 2606 of MoRT&H
Specification
150 Galvanised angle sections 100mm x 100mm of 12mm thickness
weldable structural steel as per IS: 2062, 2 nos. of 12 m length each @ kg 105.00
17.7 kg/m and 5 per cent wastage.
151 Preformed continuous chloroprene elastomer or closed cell foam
sealing element with high tear strength, vulcanised in a single operation metre 19300.00
for the full length of a joint to ensure water tightness.
9
Sr. No. Description Unit Av. Rate
152 Supply of complete assembly of strip seal expansion joint comprising of
edge beams, anchorage, strip seal element and complete accessories metre 22000.00
as per approved specifications and drawings.
153 Supply of a modular strip/box seal joint assembly comprising of edge
beams, central beam,2 modules chloroprene seal, anchorage
elements, support and control system, all steel sections protected metre 25000.00
against corrosion and installed by the manufacturer or his authorised
representative.
154 Supply of a modular box/box seal joint assembly containing 3
modules/cells and comprising of edge beams, two central beams,
chloroprene seal, anchorage elements, support and control system, all metre 30000.00
steel sections protected against corrosion and installed by the
manufacturer or his authorised representative.
155 Cast steel rocker bearing assembly of 250 tonne design load capacity
duly painted complete with all its components as per drawing and each. 75000.00
specifications
156 Forged steel roller bearing of 250 tonne design load capacity duly
painted complete with all its components as per drawing and each. 110000.00
specifications
157 PTFE sliding plate bearing assembly of 80 tonnes design load capacity
duly painted complete with all its components as per drawing and each. 180000.00
Technical Specifications
158 Elastomeric bearing assembly consisting of 7 layers of elastomer
bonded to 6 nos. internal reinforcing steel laminates by the process of
vulcanisation, complete with all components as per drawing and
each. 90000.00
Technical Specifications.
159 Supply of sliding plate bearing of 80 tonne design capacity complete as
each. 55000.00
per drawings and Technical Specifications.
160 Pot type bearing assembly consisting of a metal piston supported by a
disc, PTFE pads providing sliding surfaces against stainless steel
mating together with cast steel assemblies/fabricated structural steel each. 180000.00
assemblies duly painted with all components as per clause 2006 and
complete as per drawings and Technical Specifications.
161 Bitumen VG-10 t 40159.00
162 Bitumen VG-30 t 40960.00
163 Bitumen (Durapave Emulsion CSS-2) t 48688.00
10
Chapter-I:
1. T he provision oftipperhasbeen m ade in hoursw here lead isknow n like disposalofthe m aterials
up to 1000 m .In case w here lead isvariable like carriage ofhot m ix orconcrete m ix from plant or
earth from borrow sareas,provision hasbeen m ade in term softone-kilom eter(T -km ),w hich can
be adopted asperactualconditions.
2. P rovision hasbeen m ade foratractortrolley instead oftipperw here dism antled m aterialsofsorts
orm aterialhaving m ore volume ascom pared w ith w eight are required to be transported. T his
arrangem ent w illbe econom ical.
3. T he cost of carriage w ill vary depending upon the riding surface of the road. P rovision has
accordingly been m ade considering surfaceroad,unsurfaced gravelroadsand kutchatracks.
5. W here loading isdone by m echanicalplant like HM P or batching plant and there isautom atic
loading in tippers,provision ofloading and un-loading hasbeen m ade at the rate of10 percent of
cost ofcarriage to account fortim e by the tipperforgetting loaded at the plant and un-loaded in
the paverorotherw ise at the site.
6 A lthough the m arket ratesfor supply of aggregate at site are generally taken for estim ation
purpose,rate forcrushing ofaggregate have also been analysed asm ost ofthe contractorsprefer
to crush theirow n aggregatesin case oflarge projectsexceeding R s.50 crore in value.
7. T he cost ofm aterialshallbe evaluated considering the cost atcrushing plantsand cost ofcarriage
including loading and unloading or the ratesforsupply at site depending upon system being
follow ed at particularlocations.T hese ratesshould be com pared w ith the ratesforow n crushing
and carriage by the construction agency.
11
CHAPTER-1
CARRIAGE OF MATERIALS
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
1.1 Loading and Unloading of Stone cum
Boulder/Stone aggregates / Sand/Kanker /
Moorum.
Placing tipper at loading point, loading with
front end loader, dumping, turning for return
trip, excluding time for haulage and return trip
Unit = cum
Taking output = 5.5 cum
Time required for
i) Positioning of tipper at loading point 1 Min
703.59
Add 1% labour cess 7.04
Cost for 5.5 cum = a+b+c 710.63
Rate per cum = (a+b+c)/ 5.5 129.21
Add 12% GST 15.50
Rate per cum 144.71
Note Unloading will be by tipping. say 145.00
1.2 Loading and Unloading of Boulders by
Manual Means
Unit = cum
Taking output = 5.5 cum
a) Labour
Mate day 0.110 350.00 38.50
Mazdoor for loading and unloading day 0.750 350.00 262.50
b) Machinery
Tipper 5.5 tonne capacity hour 0.750 570.00 427.50
c) Overhead charges @ 2.5 % on (a+b) 18.21
12
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
Cost for5.5 cum = a+b+c+d 829.60
Rate per cum = (a+b+c+d)/5.5 150.84
Add 12% GST 18.10
Rate per cum 168.94
Note Unloading will be by tipping. say 169.00
Time taken for empty return trip. hour 0.290 570.00 165.30
b) Overhead charges @ 2.5 % on (a) 9.83
c) Contractor's profit @ 10 % on (a+b) 40.31
443.45
Add 1% labour cess 4.43
cost for 100 t km = a+b+c 447.88
Rate per t.km = (a+b+c)/100 4.48
Add 12% GST 0.54
Rate per t.km 5.02
say 5.00
13
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
1.4 (ii) Unsurfaced Graveled Road
Speed with load: 20 km / hour
Speed for empty return trip :30 km / hour
a) Machinery
Tipper 10 tonnes capacity
Time taken for onward haulage with load hour 0.500 570.00 285.00
Time taken for empty return trip hour 0.330 570.00 188.10
b) Overhead charges @ 2.5 % on (a) 11.83
c) Contractor's profit @ 10 % on (a+b) 48.49
533.42
Add 1% labour cess 5.33
Cost for 100 t .km = a+b+c 538.75
Rate per t.Km = (a+b+c)/100 5.39
Add 12% GST 0.65
Rate per t.km 6.03
say 6.00
1.4 (iii) Katcha Track and Track in River
Bed/Nallah Bed and Choe Bed.
Speed with load :10 km / hour
Speed while returning empty:15 km / hour
a) Machinery
Tipper 10 tonnes capacity
Time taken for onward haulage hour 1.000 570.00 570.00
Time taken for empty return trip hour 0.670 570.00 381.90
b) Overhead charges @ 2.5 % on (a) 23.80
c) Contractor's profit @ 10 % on (a+b) 97.57
1073.27
Add 1% labour cess 10.73
Cost for 100 t .km = a+b+c 1084.00
Rate per t.Km = (a+b+c)/100 10.84
Add 12% GST 1.30
Rate per t.km 12.14
say 12.10
1.5 Hand Broken Stone Aggregates 63 mm
Nominal Size
Supply of quarried stone, hand breaking into
coarse aggregate 63 mm nominal size
(passing 80 mm and retained on 50 mm
sieve) and stacking as directed
Unit = cum
Taking output = 1 cum
a) Labour
Mate day 0.060 350.00 21.00
14
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
Mazdoor day 1.500 350.00 525.00
b) Material
Supply of quarried stone 150 - 200 mm cum 1.100 700.00 770.00
size
c) Overhead charges @ 2.5 % on (a+b) 32.90
15
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
Tipper 5.5 cum capacity Hour 20.000 570.00 11400.00
d) Overhead charges @ 2.5 % on 18249.20
(a+b+c)
e) Contractor's profit @ 10 % on 74821.72
(a+b+c+d)
823038.92
Add 1% labour cess 8230.39
Cost for 600 cum = a+b+c+d+e 831269.31
Rate per cum = (a+b+c+d+e)*0.95/600 1316.18
Add 12% GST 157.94
Rate per cum 1474.12
say 1474.00
Labour Rate 6916.00
Overhead charges 2.5 % 172.90
Contractor's profit @ 10% 708.89
7797.79
Add 1% labour cess 77.98
Rate per 600cum 7875.77
Rate per cum 12.47
Add 12% GST 1.50
Rate per cum 13.97
say 14.00
Note 1. 800 cum of stone boulders are needed to
get 600 cum of stone chips of size 13.2 mm.
2. 95 per cent of above cost will be attributed
to the production of 600 cum of stone chips
of 13.2 mm size and balance 5 per cent to
the production of stone dust which comes out
as a by-product.
3. The integrated stone crusher includes
primary and secondary crushing units.
1.7 Crushing of Stone Aggregates 20 mm
Nominal Size
Crushing of stone boulders of 150 mm size in
an integrated stone crushing unit of 200
tonnes per hour capacity comprising of
primary and secondary crushing units, belt
conveyor and vibrating screens to obtain
stone aggregates of 20 mm nominal size.
Unit = cum
Taking Output = 670 cum at crusher
location.
a) Labour
Mate day 0.760 350.00 266.00
Mazdoor Skilled day 2.000 350.00 700.00
Mazdoor including breaking of any size day 17.000 350.00 5950.00
boulder.
b) Material
16
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
Stone Boulder of size 150 mm and cum 800.000 700.00 560000.00
below
c) Machinery
Integrated stone crusher of 200 TPH Hour 6.000 20872.00 125232.00
including belt conveyor and vibrating
screens
Front end loader 1 cum bucket capacity Hour 20.000 1321.00 26420.00
17
Ref. to
Sr No Description Unit Quantity Rate Rs Cost Rs
MoRTH Spec.
Unit = cum
Taking Output = 750 cum at crusher
location.
a) Labour
Mate day 0.760 350.00 266.00
Mazdoor Skilled day 2.000 350.00 700.00
Mazdoor day 17.000 350.00 5950.00
b) Material
Stone Boulder of size 150 mm and cum 800.000 700.00 560000.00
below
c) Machinery
Integrated stone crusher of 200 TPH Hour 6.000 20872.00 125232.00
including belt conveyor and vibrating
screens
Front end loader 1 cum bucket capacity Hour 20.000 1321.00 26420.00
18
Chapter-2:
Foundation
P ream ble:
1. Excavation for structure hasbeen provided both by m anualand m echanical m eans. T he rate
relevant to aparticularsituation m ay be adopted.
2. T he earth excavated from foundation hasbeen proposed to be backfilled and balance quantity
utilized forroad w orklocally except form arshy soilw here disposalhasbeen provided.
4. In case rocks
,excavationhasbeenconsidered up to adepth of3 m only.
5. Em bedm ent of foundation in soft and hard rocks has been provided as required by the
specifications.
6. Dew atering hasbeen provided in excavationsforfoundations.In case dew atering isnot required
foraparticularsite condition,the sam e m ay be om itted.
7. M ixing ofcem ent concrete hasbeen considered both by using concrete m ixerand batching plant.
T he ratecan adopted depending upon availability ofequipm ent asapproved by the Engineer.
8. Concrete batching plant isgenerally placed w ithin one km ofthe bridge site.In case oflongerlead,
transportation cost m ay be w orked out based on tone km .
9. T he coarse and fine aggregate forcem ent concrete shallbe asperIS :383.
10. Description ofitem shasbeen given very briefly.R elevant clausesofM oR T &H S pecificationsm ay
be referred fordetailed specifications.
12. P neumatic sinking isaspecialized job. A llsafety precaution asperIS : 4138 are required to be
taken.M edicalS upervision forsuch w orkisconsidered very essential.Depth ofpneumaticsinking
hasbeen restricted to 30 m below norm alw aterlevel.
14. P ipe driving rigsincluding vibratory ham m ersare assumed to be selfcontained w ith pow erunits
and necessary accessoriesrequired fordriving.
19
15.T he quantity ofconcrete w hich isrequired to be stripped offup to am inim um height of6oo m m
above the designed top levelofthe pile hasbeen taken into account in the rate analysis.
16. T he am ount indicated for testing ofpilesisforthe base year2001-2002. Forsubsequent years
,
these are required to be escalated depending upon m arket situation.
17. T he leveling course bellow the pilecap isproposed w ith M 15 grade concrete.
18. S teelreinforcem ent forcem ent concrete w orksisrequired to be provided separately.T he rate for
the sam e hasbeen analysed.
19.A ppendix-4 ofIR C: 78-2000 m ay be referred regarding precautionsto be taken during sinking of
w ells.
20. In case ofblasting,during sinking ofw ells,the innerface ofthe curb isrequired to be protected
w ith the steelplatesofthicknessnot lessthan 10 m m up to top levelofw ellcurb. For height
above top ofcurb,the thicknessofsteelplate m ay be reduced to 6 m m .T hisextraheight ofsteel
lining should be lim ited to 3 m .
21. T he concrete m ix used in bottom plug shallhave m inim um cem ent content of330 kg/cum and a
slump ofabout 150 m m to perm it easy flow ofconcrete through trem ic to fill-up allcavities.
23. A leveling course of100 m m thicknessin M 10 (1 : 3 : 6) shallbe provided before laying open
foundations.
24. In case ofopen foundationsin rock,dew atering shallnot be perm itted from the tim e ofplacing of
concrete up to 24 hoursafterplacem ent.
25. In case of open foundation in rock,the trenches around the footing shall be filled-up w ith
concrete ofM 15 grade up to alevelof0.6m for hard rock and 1.5 m for soft rock above the
foundation level.T he portion above thism ay be filled by bouldersgrouted w ith cem ent.
26. W hen there are tw o orm ore com partm entsin aw ell,the low eredge ofthe cutting edge ofthe
m iddle stem sofsuch w ellsshallbe kept about 300 m m above that ofouterstem sto prevent
rocking.
27. T he w ell curb shall be in R CC of m ix not leaner than M 25 grade w ith m inim um steel
reinforcem ent of72 kg/cum excluding bond rods.
28. T he top ofthe bottom plug shallbe at least 300 m m above top ofcurb.
29. N o dew atering shallbe carried out w ithin 7 daysofcasting ofbottom plug.
20
30 In case of cem ent concrete piles
,the m inim um grade of concrete shallbe M 35 w ith m inim um
cem ent concrete of400 kg/cum.
31. T he top ofthe pile shallproject 50 m m into the pile cap and reinforcem ent ofpile shallbe fully
anchored in pilecap.
32. T he m inim um thicknessofpile cap should be alleast 0.6 m or1.5 tim esthe diam eterofthe pile
w hicheverism ore.
34. Concrete in driven cast-in-situ pilesshallbe cast up to am inim um height of600 m m above the
designed top levelofpiles ,w hich shallbe stripped offto obtain sound concrete eitherbefore final
set ofafter3 days.
21
CHAPTER-2
FOUNDATIONS
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.1 304 Excavation for Structures
Earth work in excavation of
foundation of structures as per
drawing and technical specification,
including setting out, construction of
shoring and bracing, removal of
stumps and other deleterious matter,
dressing of sides and bottom and
backfilling with approved material.
I Ordinary soil
Unit = cum
Taking output = 10 cum
A Manual Means
(i) Depth upto 3 m
a) Labour
Mate day 0.14 350.00 49.00
Mazdoor day 3.50 350.00 1225.00
b) Overhead charges @ 10 % on 127.40
(a)
c) Contractor's profit @ 10 % on 140.14
(a+b)
1541.54
Add 1% labour cess 15.42
Cost for 10 cum = a+b+c 1556.96
Rate per cum = (a+b+c)/10 155.70
Add 12% GST 18.68
Rate per Cum. 174.38
say 174.00
Labour Rate
Labour 1274.00
Overhead charges @ 10% 127.40
Contractors Profit @10% 140.14
1541.54
Add 1% labour cess 15.42
Cost for 10 cum 1556.96
Rate per cum 155.70
Add 12% GST 18.68
Rate per Cum. 174.38
say 174.00
22
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Note 1. Cost of dewatering may be added
where required upto, 10 per cent of
labour cost Assessment for
dewatering shall be made as per site
conditions.
2.The excavated earth can be used
partially for backfilling of foundation
pit and partly for road work except
for marshy soil. Hence cost of
disposal has not been added except
for marshy soil. This remark is
common to all cases of item 12.1
excluding marshy soil.
3.The cost of shoring and shuttering,
where needed, may be added @ 1
per cent on cost of excavation for
open foundation.
2.1 (I) A (ii) Depth 3 m to 6 m
a) Labour
Mate/Supervisor day 0.18 350.00 63.00
Mazdoor day 4.50 350.00 1575.00
b) Overhead charges @ 10 % on 163.80
(a)
c) Contractor's profit @ 10 % on 180.18
(a+b)
1981.98
Add 1% labour cess 19.82
Cost for 10 cum = a+b+c 2001.80
Rate per cum = (a+b+c)/10 200.18
Add 12% GST 24.02
Rate per Cum. 224.20
say 224.00
Note Cost of dewatering may be added
where required upto 15 per cent of
labour cost. Assessment for
dewatering shall be done as per
actual ground conditions.
Labour Rate
Labour 1638.00
Overhead charges @ 10% 163.80
Contractors Profit @10% 180.18
1981.98
Add 1% labour cess 19.82
Cost for 10 cum 2001.80
Rate per cum 200.18
Add 12% GST 24.02
23
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per Cum. 224.20
say 224.00
24
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
c) Overhead charges @ 10 % on 939.20
(a+b)
d) Contractor's profit @ 10 % on 1033.12
(a+b+c)
11364.32
Add 1% labour cess 113.64
Cost for 240 cum = a+b+c+d 11477.96
Rate per cum = (a+b+c+d)/240 47.82
Add 12% GST 5.74
Rate per Cum. 53.56
say 54.00
e) Labour Rate
Labour 2912.00
Overhead charges @ 10% 291.20
Contractors Profit @10% 101.92
3466.25
Add 1% labour cess 34.66
Cost for 240cum 3500.91
Rate per cum = e/240 14.59
Add 12% GST 1.75
Rate per Cum. 16.34
say 16.00
Cost of dewatering upto 5 per cent
of (a+b) may be added, where
required. Assessment for dewatering
shall be made as per site
conditions..
2.1 (I) B Note Depth 3 m to 6 m
(ii) Unit = cum
Taking output = 210 cum
a) Labour
Mate day 0.32 350.00 112.00
Mazdoor day 8.00 350.00 2800.00
b) Machinery
Hydraulic excavator 1.0 cum hour 6.00 1080.00 6480.00
bucket capacity
c) Overhead charges @ 10 % on 939.20
(a+b)
d) Contractor's profit @ 10 % on 1033.12
(a+b+c)
11364.32
Add 1% labour cess 113.64
Cost for 210 cum = a+b+c+d 11477.96
Rate per cum = (a+b+c+d)/210 54.66
Add 12% GST 6.56
Rate per Cum. 61.22
25
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 61.00
e) Labour Rate
Labour 2912.00
Overhead charges @ 10% 291.20
Contractors Profit @10% 320.32
3523.52
Add 1% labour cess 35.24
Cost for 210cum 3558.76
Rate per cum = e/210 16.95
Add 12% GST 2.03
Rate per Cum. 18.98
say 19.00
Cost of dewatering upto 7.5 per cent
of (a+b) may be added, where
required. Assessment for dewatering
shall be made as per site
conditions..
2.1 (I) B Note Depth above 6m
(iii) Unit = cum
Taking output = 180 cum
a) Labour
Mate day 0.40 350.00 140.00
Mazdoor day 10.00 350.00 3500.00
b) Machinery
Hydraulic excavator 1.0 cum hour 6.00 1080.00 6480.00
bucket capacity
c) Overhead charges @ 10 % on 1012.00
(a+b)
d) Contractor's profit @ 10 % on 1113.20
(a+b+c)
12245.20
Add 1% labour cess 122.45
Cost for 180 cum = a+b+c+d 12367.65
Rate per cum = (a+b+c+d)/180 68.71
Add 12% GST 8.25
Rate per Cum. 76.95
say 77.00
e) Labour Rate
Labour 3640.00
Overhead charges @ 10% 364.00
Contractors Profit @10% 400.40
4404.40
Add 1% labour cess 44.04
Cost for180cum 4448.44
Rate per cum = e/180 24.71
26
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 2.97
Rate per Cum. 27.68
say 28.00
Note 2.Labour provided for excavation by
mechanical means includes that
required for trimming of bottom and
side slopes.
2.1 Ordinary Rock (not requiring
blasting)
II Manual Means
A Depth upto 3 m
(i) Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.20 350.00 70.00
Mazdoor day 5.00 350.00 1750.00
b) Overhead charges @ 10 % on 182.00
(a)
c) Contractor's profit @ 10 % on 200.20
(a+b)
2202.20
Add 1% labour cess 22.02
Cost for 10 cum = a+b+c 2224.22
Labour Rate per cum = (a+b+c)/10 222.42
27
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
10483.44
Add 1% labour cess 104.83
Cost for 180 cum = a+b+c+d 10588.27
Rate per cum = (a+b+c+d)/180 58.82
Add 12% GST 7.06
Rate per Cum. 65.88
say 66.00
e) Labour Rate
Labour 2184.00
Overhead charges @ 10% 218.40
Contractors Profit @10% 240.24
2642.64
Add 1% labour cess 26.43
Cost for180cum 2669.07
Rate per cum = e/180 14.83
Add 12% GST 1.78
Rate per Cum. 16.61
say 17.00
1.Cost of dewatering upto 10 per
cent of (a+b), may be added, where
required Assessment for dewatering
shall be made as per site conditions.
28
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
5146.63
Add 1% labour cess 51.47
Cost for 10 cum = a+b+c+d+e 5198.10
Rate per cum = (a+b+c+d+e)/10 519.81
Add 12% GST 62.38
Rate per Cum. 582.19
say 582.00
e) Labour Rate
Labour 3198.42
Overhead charges @ 10% 319.84
Contractors Profit @10% 351.83
3870.08
Add 1% labour cess 38.70
Cost for10cum 3908.79
Rate per cum = e/10 390.88
Add 12% GST 46.91
Rate per Cum. 437.78
say 438.00
Cost of dewatering @ 10 per cent
of (a+b) may be added, where
required Assessment for dewatering
shall be made as per site conditions.
29
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour 1820.00
Overhead charges @ 10% 182.00
Contractors Profit @10% 200.20
2202.20
Add 1% labour cess 22.02
Cost for10cum 2224.22
Rate per cum = e/10 222.42
Add 12% GST 26.69
Rate per Cum. 249.11
say 249.00
1. Cost of dewatering upto10 per
cent of (a+b), may be added, where
required Assessment for dewatering
shall be made as per site conditions.
30
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for10cum 4448.44
Rate per cum = e/10 444.84
Add 12% GST 53.38
Rate per Cum. 498.23
say 498.00
1. Cost of dewatering @ 30 per cent
of (a), may be added, where
required Assessment for dewatering
shall be made as per site conditions.
32
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 249.00
2.2 304 Filling Annular Space Around
Footing in Rock
Unit = cum
Taking out put = 1 cum
Lean cement concrete 1:3:6 nominal
mix. Rate may be taken as per item
2.4.
2.3 304 Sand Filling in Foundation Trenches
as per Drawing & Technical
Specification
Unit = cum
Taking output = 1 cum
a) Labour
Mate day 0.01 350.00 3.50
Mazdoor day 0.30 350.00 105.00
b) Material
Sand (assuming 20 per cent cum 1.20 1167.00 1400.40
voids)
c) Overhead charges @ 10 % on 150.89
(a+b)
d) Contractor's profit @ 10 % on 165.98
(a+b+c)
1825.77
Add 1% labour cess 18.26
Rate per cum = a+b+c+d 1844.03
Add 12% GST 221.28
Rate per Cum. 2065.31
say 2065.00
Labour Rate
Labour 108.50
Overhead charges @ 10%= 10.85
Contractors Profit @10%= 11.94
131.29
Add 1% labour cess 1.31
Cost for 1cum 132.60
Rate per cum = 132.60
Add 12% GST 15.91
Rate per Cum. 148.51
say 149.00
2.4 2100 PCC 1:3:6 in Foundation
33
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Plain cement concrete 1:3:6 nominal
mix in foundation with crushed stone
aggregate 40 mm nominal size
mechanically mixed, placed in
foundation and compacted by
vibration including curing for 14
days.
Unit = cum
Taking output = 15 cum
a) Labour
Mate day 0.64 350.00 224.00
Mason day 1.00 505.17 505.17
Mazdoor day 15.00 350.00 5250.00
b) Material
40 mm Aggregate cum 13.50 954.00 12879.00
coarse Sand cum 6.75 1156.00 7803.00
cement tonne 3.45 6875.00 23718.75
Cost of water KL 18.00 102.00 1836.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Water tanker 6 KL capacity hour 2.00 500.00 1000.00
d) Overhead charges @ 10 % on 5909.59
(a+b+c)
e) Contractor's profit @ 10 % on 6500.55
(a+b+c+d)
71506.06
Add 1% labour cess 715.06
Cost for 15 cum = a+b+c+d+e 72221.12
Rate per cum = (a+b+c+d+e)/15 4814.74
Add 12% GST 577.77
Rate per Cum. 5392.51
say 5393.00
Labour Rate
Labour 5979.17
Overhead charges @ 10%= 597.92
Contractors Profit @10%= 657.71
7234.79
Add 1% labour cess 72.35
Cost for 15cum 7307.14
Rate per cum 487.14
Add 12% GST 58.46
Rate per Cum. 545.60
say 546.00
34
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Vibrator is a part of minor T & P
which is already included in
overhead charges of the contractor.
2.5 1300 Note Brick Masonry Work in Cement
Mortar 1:3 in Foundation complete
excluding Pointing and Plastering, as
per Drawing and Technical
Specifications.
Unit = cum
Taking output = 5 cum
a) Material
Bricks Ist class each 2500.00 7.00 17500.00
Cement mortar 1:3 (Rate as in cum 1.20 5049.00 6058.80
Item 12.6 A sub-analysis)
b) Labour
Mate day 0.48 350.00 168.00
Mason day 4.00 505.17 2020.67
Mazdoor day 8.00 350.00 2800.00
c) Overhead charges @ 10 % on 2854.75
(a+b)
d) Contractor's profit @ 10 % on 3140.22
(a+b+c)
34542.43
Add 1% labour cess 345.42
Cost for 5 cum = a+b+c+d 34887.86
Rate per cum (a+b+c+d)/5 6977.57
Add 12% GST 837.31
Rate per Cum. 7814.88
say 7815.00
Labour Rate
Labour 23558.80
Overhead charges @ 10%= 2355.88
Contractors Profit @10%= 2591.47
28506.15
Add 1% labour cess 285.06
Cost for 5cum 28791.21
Rate per cum 5758.24
Add 12% GST 690.99
Rate per Cum. 6449.23
say 6449.00
2.6 Sub- Cement Mortar 1:3 (1 cement : 3
analysis sand)
(A) Unit = 1 cum
Taking output = 1 cum
a) Materials
Cement tonne 0.51 6875.00 3506.25
35
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Sand cum 1.05 1156.00 1213.80
b) Labour
Mate day 0.04 350.00 14.00
Mazdoor day 0.90 350.00 315.00
Total Material and Labour = (a+b) say 5049.00
Sub- Cement Mortar1:2 (1cement :2 sand)
analysis
(Addl.) (B) Unit = 1 cum
Taking output = 1 cum
a) Materials
Cement tonne 0.67 6875.00 4620.00
Sand cum 0.93 1156.00 1075.08
b) Labour
Mate day 0.04 350.00 14.00
Mazdoor day 0.90 350.00 315.00
Total Material and Labour = (a+b) say 6024.00
36
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.7 1400 Stone Masonry Work in Cement
Mortar 1:3 in Foundation complete
as per Drawing and Technical
Specifications.
Unit = cum
Taking output = 5 cum
1405.4 Square Rubble Coursed Rubble
Masonry (first sort)
(A) a) Material
Stone cum 5.50 1368.00 7524.00
Through and bond stone each 35.00 25.00 875.00
(35no.x0.24mx0.24mx0.39m = 0.79
cu.m)
Cement mortar 1:3 (Rate as in cum 1.50 5049.00 7573.50
Item 12.6 A sub-analysis)
b) Labour
Mason day 7.50 505.17 1583.78
Mate day 0.66 350.00 231.00
Mazdoor day 9.00 350.00 3150.00
c) Overhead charges @ 10 % on 2093.73
(a+b)
d) Contractor's profit @ 10 % on 2303.10
(a+b+c)
25334.11
Add 1% labour cess 253.34
Cost for 5 cum = a+b+c+d 25587.45
Rate per cum (a+b+c+d)/5 5117.49
Add 12% GST 614.10
Rate per Cum. 5731.59
say 5732.00
Labour Rate
Labour 4964.78
Overhead charges @ 10% 496.48
Contractors Profit @10% 546.13
6007.38
Add 1% labour cess 60.07
Cost for 5cum 6067.46
Rate per cum 1213.49
Add 12% GST 145.62
Rate per Cum. 1359.11
say 1359.00
1405.3 Random Rubble Masonry
(B) ( coursed/uncoursed )
Unit = cum
Taking output = 5 cum
37
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a) Material
Stone cum 5.50 700.00 3850.00
Through and bond stone each 35.00 25.00 875.00
(35nos.x0.24mx0.24mx0.39m = 0.79
cu.m)
Cement mortar 1:3 (Rate as in cum 1.55 5049.00 7825.95
Item 12.6 A sub-analysis)
b) Labour
Mate day 0.62 350.00 217.00
Mason day 6.00 505.17 3031.00
Mazdoor day 9.00 350.00 3150.00
18948.95
c) Overhead charges @ 10 % on 1894.90
(a+b)
d) Contractor's profit @ 10 % on 2084.38
(a+b+c)
22928.23
Add 1% labour cess 229.28
Cost for 5 cum = a+b+c+d 23157.51
Rate per cum (a+b+c+d)/5 4631.50
Add 12% GST 555.78
Rate per Cum. 5187.28
say 5187.00
The labour already considered in
cement mortar has been taken into
account while proposing labour for
masonry works.
Labour Rate
Labour 6398.00
Overhead charges @ 10% 639.80
Contractors Profit @10% 703.78
7741.58
Add 1% labour cess 77.42
Cost for 5cum 7819.00
Rate per cum 1563.80
Add 12% GST 187.66
Rate per Cum. 1751.46
say 1751.00
2.8 1500, Note Plain/Reinforced Cement Concrete
1700 & in Open Foundation complete as per
2100 Drawing and Technical
Specifications.
PCC Grade M15
A Unit = cum
Taking output = 15 cum
a) Material
38
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cement tonne 4.13 6875.00 28393.75
Coarse sand cum 6.75 1156.00 7803.00
40 mm Aggregate cum 8.10 954.00 7727.40
20 mm Aggregate cum 4.05 1298.00 5256.90
10 mm Aggregate cum 1.35 1298.00 1752.30
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 63 KVA hour 6.00 707.00 4242.00
Per Cum Basic Cost of Labour, 4356.00
Material & Machinery (a+b+c)
d) Formwork @ 4 per cent on 2613.36
cost of concrete i.e. cost of material,
labour and machinery
39
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 735.00
2.8 Note PCC Grade M20
B Unit : cum
Taking output = 15 cum
a) Material
Cement tonne 5.16 6875.00 35475.00
Coarse sand cum 6.75 1156.00 7803.00
40 mm Aggregate cum 5.40 954.00 5151.60
20 mm Aggregate cum 5.40 1298.00 7009.20
10 mm Aggregate cum 2.70 1298.00 3504.60
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Per Cum Basic Cost of Labour, 4859.00
Material & Machinery (a+b+c)
d) Formwork @ 4 per cent on 2915.29
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 7579.74
(a+b+c+d)
f) Contractor's profit @ 10 % on 8337.72
(a+b+c+d+e)
91714.90
Add 1% labour cess 917.15
Cost for 15 cum = a+b+c+d+e+f 92632.05
Rate per cum = (a+b+c+d+e+f)/15 6175.47
Add 12% GST 741.06
Rate per Cum. 6916.53
say 6917.00
Labour Rate
Labour 8058.75
Overhead charges @ 10% 805.88
Contractors Profit @10% 886.46
9751.09
Add 1% labour cess 97.51
Cost for 15cum 9751.09
Rate per cum 650.07
Add 12% GST 78.01
Rate per Cum. 728.08
say 728.00
40
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.8 RCC Grade M20
C Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 5.21 6875.00 35818.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Per Cum Basic Cost of Labour, 5006.00
Material & Machinery (a+b+c)
d) Formwork @ 4 per cent on 3003.34
(a+b+c)
e) Overhead charges @ 10 % on 7808.68
(a+b+c+d)
f) Contractor's profit @ 10 % on 8589.55
(a+b+c+d+e)
94485.08
Add 1% labour cess 944.85
Cost for 15 cum = a+b+c+d+e+f 95429.93
Rate per cum = ( a+b+c+d+e+f )/15 6362.00
42
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum 82.59
Add 12% GST 9.91
Rate per Cum. 92.50
say 92.00
2.8 With Batching Plant, Transit Mixer
and Concrete Pump
D Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 5.99 6875.00 41181.25
Coarse sand cum 6.75 1156.00 7803.00
40 mm Aggregate cum 5.40 954.00 5151.60
20 mm Aggregate cum 5.40 1298.00 7009.20
10 mm Aggregate cum 2.70 1298.00 3504.60
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Per Cum Basic Cost of Labour, 5240.00
Material & Machinery (a+b+c)
d) Formwork @ 3.75 per cent of 2947.07
(a+b+c)
e) Overhead charges @ 10 % on 8153.55
(a+b+c+d)
f) Contractor's profit @ 10 % on 8968.90
(a+b+c+d+e)
98657.91
Add 1% labour cess 986.58
Cost for 15 cum = a+b+c+d+e+f 99644.49
Rate per cum = ( a+b+c+d+e+f )/15 6642.97
44
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 10% 810.95
Contractors Profit @10% 892.05
9812.50
Add 1% labour cess 98.12
Cost for 120cum 9910.62
Rate per cum 82.59
Add 12% GST 9.91
Rate per Cum. 92.50
2.8 say 92.00
E Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 6.05 6875.00 41593.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Per Cum Basic Cost of Labour, 5391.00
Material & Machinery (a+b+c)
d) Formwork @ 3.75 per cent of 3032.19
a+b+c.
e) Overhead charges @ 10 % on 8389.07
(a+b+c+d)
f) Contractor's profit @ 10 % on 9227.98
(a+b+c+d+e)
101599.74
Add 1% labour cess 1016.00
cost of 15 cum = a+b+c+d+e+f 102615.74
Rate per cum (a+b+c+d+e+f )/15 6841.05
Add 12% GST 820.93
Rate per Cum. 7661.98
say 7662.00
Labour Rate
Labour 8058.75
Overhead charges @ 10 % 805.88
Contractors Profit @10% 886.46
9751.09
45
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 97.51
Cost for 15cum 9848.60
Rate per cum 656.57
Add 12% GST 78.79
Rate per Cum. 735.36
say 735.00
2.8 E With Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit: cum
Taking Output = 120 cum
a) Material
Cement tonne 48.38 6875.00 332612.50
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity 1 cum hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 9617.00
Material & Machinery (a+b+c)
d) Formwork @ 3.75 per cent on 43276.16
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 119730.72
(a+b+c+d)
f) Contractor's profit @ 10 % on 131703.79
(a+b+c+d+e)
1448741.67
Add 1% labour cess 14487.42
cost of 120 cum = a+b+c+d+e+f 1463229.08
Rate per cum (a+b+c+d+e+f )/120 12193.58
46
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour Rate
Labour 8109.50
Overhead charges @ 10% 810.95
Contractors Profit @10% 892.05
9812.50
Add 1% labour cess 98.12
Cost for 120cum 9910.62
Rate per cum 82.59
Add 12% GST 9.91
Rate per Cum. 92.50
say 92.00
2.8 PCC Grade M30
F Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 6.08 6875.00 41800.00
Coarse sand cum 6.75 1156.00 7803.00
40 mm Aggregate cum 5.40 954.00 5151.60
20 mm Aggregate cum 5.40 1298.00 7009.20
10 mm Aggregate cum 2.70 1298.00 3504.60
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Per Cum Basic Cost of Labour, 5281.00
Material & Machinery (a+b+c)
d) Formwork @ 3.50 per cent of 2772.25
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 8197.94
(a+b+c+d)
f) Contractor's profit @ 10 % on 9017.73
(a+b+c+d+e)
99195.07
Add 1% labour cess 991.95
cost of 15 cum = a+b+c+d+e+f 100187.03
Rate per cum (a+b+c+d+e+f )/15 6679.14
Add 12% GST 801.50
Rate per Cum. 7480.63
say 7481.00
47
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour Rate
Labour 8058.75
Overhead charges @ 10% 805.88
Contractors Profit @10% 886.46
9751.09
Add 1% labour cess 97.51
Cost for 15cum 9848.60
Rate per cum 656.57
Add 12% GST 78.79
Rate per Cum. 735.36
say 735.00
2.8 F Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit : cum
Taking Output = 120 cum
a) Material
Cement tonne 48.60 6875.00 334125.00
Coarse sand cum 54.00 1214.00 65556.00
40 mm Aggregate cum 43.20 954.00 41212.80
20 mm Aggregate cum 43.20 1298.00 56073.60
10 mm Aggregate cum 21.60 1298.00 28036.80
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 9506.00
Material & Machinery (a+b+c)
d) Formwork @ 3.50 per cent of 39923.89
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 118060.66
(a+b+c+d)
f) Contractor's profit @ 10 % on 129866.73
(a+b+c+d+e)
1428533.98
48
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 14285.34
cost of 120 cum = a+b+c+d+e+f 1442819.32
Rate per cum (a+b+c+d+e+f )/120 12023.49
49
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 1016.94
cost of 15 cum = a+b+c+d+e+f 102710.57
Rate per cum = (a+b+c+d+e+f)/15 6847.37
Add 12% GST 821.68
Rate per Cum. 7669.06
say 7669.00
Labour Rate
Labour 8058.75
Overhead charges @ 10% 805.88
Contractors Profit @10% 886.46
9751.09
Add 1% labour cess 97.51
Cost for 15cum 9848.60
Rate per cum 656.57
Add 12% GST 78.79
Rate per Cum. 735.36
say 735.00
2.8 G Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 48.80 6875.00 335500.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 9641.00
Material & Machinery (a+b+c)
d) Formwork @ 3.5 per cent of 40492.15
cost of concrete i.e. cost of material,
labour and machinery
50
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 119741.06
(a+b+c+d)
f) Contractor's profit @ 10 % on 131715.17
(a+b+c+d+e)
1448866.88
Add 1% labour cess 14488.67
cost of 120 cum = a+b+c+d+e+f 1463355.55
Rate per cum (a+b+c+d+e+f )/120 12194.63
Add 12% GST 1463.36
Rate per Cum. 13657.99
say 13658.00
Labour Rate
Labour 8109.50
Overhead charges @ 10% 851.50
Contractors Profit @10% 896.10
9857.10
Add 1% labour cess 98.57
Cost for 120cum 9857.10
Rate per cum 82.14
Add 12% GST 9.86
Rate per Cum. 92.00
say 92.00
2.8 RCC Grade M35
H Using Concrete Mixer
Case I Unit = cum
51
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 8526.70
(a+b+c+d)
f) Contractor's profit @ 10 % on 9379.37
(a+b+c+d+e)
103173.08
Add 1% labour cess 1031.73
cost of 15 cum = a+b+c+d+e+f 104204.81
Rate per cum = (a+b+c+d+e+f)/15 6946.99
Add 12% GST 833.64
Rate per Cum. 7780.63
say 7781.00
Labour Rate
Labour 8058.75
Overhead charges @ 10% 805.88
Contractors Profit @10% 886.46
9751.09
Add 1% labour cess 97.51
Cost for 15cum 9848.60
Rate per cum 656.57
Add 12% GST 78.79
Rate per Cum. 735.36
say 735.00
2.8 H Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit ; cum
Taking Output = 120 cum
a) Material
Cement tonne 50.64 6875.00 348150.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
52
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Per Cum Basic Cost of Labour, 9747.00
Material & Machinery (a+b+c)
d) Formwork @ 3 per cent on 35087.06
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 120465.56
(a+b+c+d)
f) Contractor's profit @ 10 % on 132512.11
(a+b+c+d+e)
1457633.22
Add 1% labour cess 14576.33
cost of 120 cum = a+b+c+d+e+f 1472209.55
Rate per cum = (a+b+c+d+e+f)/120 12268.41
53
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Labour
Mate day 0.40 350.00 140.00
Mazdoor for filling sand bags, day 15.00 350.00 5250.00
stitching and placing
c) Machinery
Crane with grab 1 cum capacity hour 20.00 1250.00 25000.00
54
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mazdoor for piling 8" dia ballies day 18.00 350.00 6300.00
for piling 8" dia ballies
Mazdoor for bracing with 2" dia day 12.00 350.00 4200.00
ballies
Mazdoor for filling sand bags, day 110.00 350.00 38500.00
stitching and placing
c) Machinery
Crane with grab 1 cum capacity hour 50.00 1250.00 62500.00
56
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Nuts & bolts Kg 20.00 0.85 17.00
b) Labour
(for cutting, bending, making holes,
joining, welding and erecting in
position)
Mate day 1.32 350.00 462.00
Fitter day 5.50 403.67 2220.17
Blacksmith day 5.50 505.17 2778.42
Welder day 5.50 505.17 2778.42
Mazdoor day 16.50 350.00 5775.00
Electrodes, cutting gas and other 5788.25
consumables @ 10 per cent of cost
of (a) above
c) Overhead charges @ 10 % on 7768.48
(a+b)
d) Contractor's profit @ 10 % on 8545.32
(a+b+c)
93998.55
Add 1% labour cess 939.99
Rate per MT (a+b+c+d) 94938.53
Add 12% GST 11392.62
Rate per MT. 106331.16
say 106331.00
Labour Rate
Labour 14014.00
Overhead charges @ 10% 1401.40
Contractors Profit @10% 1541.54
16956.94
Add 1% labour cess 169.57
Cost for 1 MT. 17126.51
Rate per MT. 17126.51
Add 12% GST 2055.18
Rate per MT. 19181.69
say 19182.00
2.11 1200, Plain/Reinforced Cement Concrete,
1500 & in Well Foundation complete as per
1700 Drawing and Technical Specification.
Unit = 1 cum
Taking output = 1 cum
Well curb
A RCC M20 Grade
(i) Same as for 12.8 (C) except for
formwork which shall be@ 20 per
cent of the cost of concrete instead
of 4 per cent.
57
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5006.00
Material & Machinery (a+b+c)
d) formwork @ 20 per cent of the 1001.20
cost of concrete
e) Overhead charges @ 10 % on 600.72
(a+b+c+d)
f) Contractor's profit @ 10 % on 660.79
(a+b+c+d+e)
7268.71
Add 1% labour cess 72.69
Rate per cum (a+b+c+d+e+f) 7341.40
Add 12% GST 880.97
Rate per cum. 8222.37
say 8222.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
58
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 A RCC M25 Grade
(ii) Same as for 12.8 (E) except for
formwork which shall be@ 20 per
cent of the cost of concrete instead
of 3.75 per cent.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5391.00
Material & Machinery (a+b+c)
d) formwork @ 20 per cent of the 1078.20
cost of concrete
e) Overhead charges @ 10 % on 646.92
(a+b+c+d)
f) Contractor's profit @ 10 % on 711.61
(a+b+c+d+e)
7827.73
Add 1% labour cess 78.28
Rate per cum (a+b+c+d+e+f) 7906.01
Add 12% GST 948.72
Rate per cum. 8854.73
say 8855.00
Labour Rate
Labour 3986.50
Overhead charges @ 5% 199.33
Contractors Profit @10% 418.58
4604.41
Add 1% labour cess 46.04
Cost for 15 cum 4650.45
Rate per cum 310.03
Add 12% GST 37.20
Rate per cum. 347.23
say 347.00
2.11 A (ii) RCC M25 Grade
Case II Per Cum Basic Cost of Labour, 9875.00
Material & Machinery (a+b+c)
d) formwork @ 20 per cent of the 1975.00
cost of concrete
e) Overhead charges @ 10 % on 1185.00
(a+b+c+d)
59
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 1303.50
(a+b+c+d+e)
14338.50
Add 1% labour cess 143.39
Rate per cum (a+b+c+d+e+f) 14481.89
Add 12% GST 1737.83
Rate per cum. 16219.71
say 16220.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 A RCC M35 Grade
(iii) Same as for 12.8 (H) except for
formwork which shall be@ 20 per
cent of the cost of concrete instead
of 3.0 per cent.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5519.00
Material & Machinery (a+b+c)
d) formwork @ 20 per cent of the 1103.80
cost of concrete
e) Overhead charges @ 10 % on 662.28
(a+b+c+d)
f) Contractor's profit @ 10 % on 728.51
(a+b+c+d+e)
8013.59
Add 1% labour cess 80.14
Rate per cum (a+b+c+d+e+f) 8093.72
Add 12% GST 971.25
Rate per cum. 9064.97
say 9065.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
60
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 A (iii) With Batching Plant, Transit Mixer
and Concrete Pump
Case II Per Cum Basic Cost of Labour, 10017.00
Material & Machinery (a+b+c)
d) formwork @ 20 per cent of the 2003.40
cost of concrete
e) Overhead charges @ 10 % on 1202.04
(a+b+c+d)
f) Contractor's profit @ 10 % on 1322.24
(a+b+c+d+e)
Rate per cum (a+b+c+d+e+f) 14544.68
Add 12% GST 1745.36
Rate per cum. 16290.05
say 16290.00
Note. If curb concrete is carried out within
steel liner, cost of formwork shall be
excluded.
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
61
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
5797.84
Add 1% labour cess 57.98
Rate per cum (a+b+c+d+e+f) 5855.81
Add 12% GST 702.70
Rate per cum. 6558.51
say 6559.00
Labour 3986.50
Overhead charges @ 10% 438.52
Contractors Profit @10% 442.50
4867.52
Add 1% labour cess 48.68
Cost for 15 cum 4916.19
Rate per cum 327.75
Add 12% GST 39.33
Rate per cum. 367.08
say 367.00
64
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Case II Per Cum Basic Cost of Labour, 9469.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 946.90
cost of concrete
e) Overhead charges @ 10 % on 1041.59
(a+b+c+d)
f) Contractor's profit @ 10 % on 1145.75
(a+b+c+d+e)
12603.24
Add 1% labour cess 126.03
Rate per cum (a+b+c+d+e+f) 12729.27
Add 12% GST 1527.51
Rate per cum. 14256.78
say 14257.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 B RCC M25 Grade
(v) Same as for 12.8 (E) except for
formwork which shall be @ 10 per
cent of the cost of concrete instead
of 3.5 per cent.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5391.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 539.10
cost of concrete
e) Overhead charges @ 10 % on 593.01
(a+b+c+d)
f) Contractor's profit @ 10 % on 652.31
(a+b+c+d+e)
7175.42
Add 1% labour cess 71.75
Rate per cum (a+b+c+d+e+f) 7247.18
Add 12% GST 869.66
Rate per cum. 8116.84
say 8117.00
Labour 3986.50
65
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 5% 199.33
Contractors Profit @10% 418.58
4604.41
Add 1% labour cess 46.04
Cost for 15 cum 4650.45
Rate per cum 310.03
Add 12% GST 37.20
Rate per cum. 347.23
say 347.00
66
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 580.91
(a+b+c+d)
f) Contractor's profit @ 10 % on 639.00
(a+b+c+d+e)
7029.01
Add 1% labour cess 70.29
Rate per cum (a+b+c+d+e+f) 7099.30
Add 12% GST 851.92
Rate per cum. 7951.22
say 7951.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 B (vi) With Batching Plant, Transit Mixer
and Concrete Pump
Case II Per Cum Basic Cost of Labour, 9506.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 950.60
cost of concrete
e) Overhead charges @ 10 % on 1045.66
(a+b+c+d)
f) Contractor's profit @ 10 % on 1150.23
(a+b+c+d+e)
12652.49
Add 1% labour cess 126.52
Rate per cum (a+b+c+d+e+f) 12779.01
Add 12% GST 1533.48
Rate per cum. 14312.49
say 14312.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
67
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum. 45.27
say 45.00
2.11 B RCC M30 Grade
(vii) Same as for 12.8 (G) except for
formwork which shall be @ 10 per
cent of the cost of concrete instead
of 3.5 per cent.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5414.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 541.40
cost of concrete
e) Overhead charges @ 10 % on 595.54
(a+b+c+d)
f) Contractor's profit @ 10 % on 655.09
(a+b+c+d+e)
7206.03
Add 1% labour cess 72.06
Rate per cum (a+b+c+d+e+f) 7278.09
Add 12% GST 873.37
Rate per cum. 8151.47
say 8151.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 B (vii) With Batching Plant, Transit Mixer
and Concrete Pump
Case II Per Cum Basic Cost of Labour, 9641.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 964.10
cost of concrete
e) Overhead charges @ 10 % on 1060.51
(a+b+c+d)
f) Contractor's profit @ 10 % on 1166.56
(a+b+c+d+e)
12832.17
Add 1% labour cess 128.32
Rate per cum (a+b+c+d+e+f) 12960.49
Add 12% GST 1555.26
68
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum. 14515.75
say 14516.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 B RCC M35 Grade
(viii) Same as for 12.8 (H) except for
formwork which shall be @ 10 per
cent of the cost of concrete instead
of 3 per cent.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5519.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 551.90
cost of concrete
e) Overhead charges @ 10 % on 607.09
(a+b+c+d)
f) Contractor's profit @ 10 % on 667.80
(a+b+c+d+e)
7345.79
Add 1% labour cess 73.46
Rate per cum (a+b+c+d+e+f) 7419.25
Add 12% GST 890.31
Rate per cum. 8309.56
say 8310.00
Labour Rate
Labour 3986.50
Overhead charges @ 5% 199.33
Contractors Profit @10% 418.58
4604.41
Add 1% labour cess 46.04
Cost for 15 cum 4650.45
Rate per cum 310.03
Add 12% GST 37.20
Rate per cum. 347.23
say 347.00
2.11 B With Batching Plant, Transit Mixer
(viii) and Concrete Pump
69
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Case II Per Cum Basic Cost of Labour, 10017.00
Material & Machinery (a+b+c)
d) formwork @ 10 per cent of the 1001.70
cost of concrete
e) Overhead charges @ 10 % on 1101.87
(a+b+c+d)
f) Contractor's profit @ 10 % on 1212.06
(a+b+c+d+e)
13332.63
Add 1% labour cess 133.33
Rate per cum (a+b+c+d+e+f) 13465.95
Add 12% GST 1615.91
Rate per cum. 15081.87
say 15082.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 B RCC M40 Grade
(ix) Using Batching Plant, Transit Mixer
and Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 51.60 6875.00 354750.00
Coarse Sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture kg 206.00 160.00 32960.00
b) Labour
Mate day 0.84 350.00 294.00
Meson day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
70
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity for tonne.k 300xL 1601.00 480300.00
lead beyond 1 km. m
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 80609
Material & Machinery (a+b+c)
d) Formwork @ 10 per cent on 120912.85
cost of concrete i.e. cost of material,
labour and machinery
e) Overhead charges @ 10 % on 133004.14
(a+b+c+d)
f) Contractor's profit @ 10 % on 146304.55
(a+b+c+d+e)
1609350.03
Add 1% labour cess 16093.50
cost of 120 cum = a+b+c+d+e+f 1625443.53
Rate per cum = (a+b+c+d+e+f)/120 13545.36
71
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
40 mm Aggregate cum 5.40 954.00 5151.60
20 mm Aggregate cum 5.40 1298.00 7009.20
10 mm Aggregate cum 2.70 1298.00 3504.60
Admixture Kg 18.60 160.00 2976.00
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Light Crane 3 tonnes capacity for hour 6.00 680.00 4080.00
handling tremie pipe
Per Cum Basic Cost of Labour, 5509.00
Material & Machinery (a+b+c)
Add 5 per cent of cost of material 3633.67
and labour towards cost of forming
sump, protective bunds, chiselling
and making arrangements for under
water concreting with tremie pipe..
73
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 10% 812.35
74
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 1088.36
cost of 15 cum = a+b+c+d+e 109924.62
75
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Per Cum Basic Cost of Labour, 9819.00
Material & Machinery (a+b+c)
Add 5 per cent of cost of material 28534.33
and labour towards cost of forming
sump, protective bunds, chiselling
and making arrangements for under
water concreting with tremie pipe..
76
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Light Crane of 3 tonnes capacity hour 6.00 680.00 4080.00
for handling tremie pipe
77
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture Kg 172.80 160.00 27648.00
b) Labour
Mate day 0.88 350.00 308.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity, tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 9863.00
Material & Machinery (a+b+c)
Add 5 per cent of cost of material 28795.58
and labour towards cost of forming
sump, protective bunds, chiselling
and making arrangements for under
water concreting with tremie pipe..
78
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 93.00
2.11 C PCC Grade M35
(iv) Using Concrete Mixer
Case I Unit = 1 cum
79
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Contractors Profit @10% 888.00
9768.03
Add 1% labour cess 97.68
Cost for 15 cum 9865.71
Rate per cum 657.71
Add 12% GST 78.93
Rate per cum. 736.64
say 737.00
2.11 C (iv) Using Batching Plant, Transit Mixer
and Crane/concrete pump
Case II Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 50.28 6875.00 345675.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture Kg 172.80 160.00 27648.00
b) Labour
Mate day 0.88 350.00 308.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity, tonne.k 300L 1601.00 480300.00
lead beyond 1 Km, L - lead in m
Kilometer
Concrete Pump hour 6.00 240.00 1440.00
Per Cum Basic Cost of Labour, 9957.00
Material & Machinery (a+b+c)
Add 5 per cent of cost of material 29359.33
and labour towards cost of forming
sump, protective bunds, chiselling
and making arrangements for under
water concreting with tremie pipe..
81
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Case II Per Cum Basic Cost of Labour, 9588.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 958.80
(a+b+c)
e) Contractor's profit @ 10 % on 1054.68
(a+b+c+d)
11601.48
Add 1% labour cess 116.01
Rate per cum = (a+b+c+d+e) 11717.49
Add 12% GST 1406.10
Rate per cum. 13123.59
say 13124.00
Labour Rate
Labour 3976.00
Overhead charges @ 10% 397.60
Contractors Profit @10% 437.36
4810.96
Add 1% labour cess 48.11
Cost for 120 cum 4859.07
Rate per cum 40.49
Add 12% GST 4.86
Rate per cum. 45.35
say 45.00
2.11 D Grade M25 PCC
(ii) Same as in bottom plug concrete,
excluding cost of forming sump,
protective bunds, chiseling etc.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5743.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 574.30
(a+b+c)
e) Contractor's profit @ 10 % on 631.73
(a+b+c+d)
6949.03
Add 1% labour cess 69.49
Rate per cum = (a+b+c+d+e) 7018.52
Add 12% GST 842.22
Rate per cum. 7860.74
say 7861.00
Labour Rate
Labour 3993.50
Overhead charges @ 10% 399.35
Contractors Profit @10% 439.29
4832.14
Add 1% labour cess 48.32
82
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 15 cum 4880.46
Rate per cum 325.36
Add 12% GST 39.04
Rate per cum. 364.41
say 364.00
2.11 D (ii) Using Batching Plant, Transit Mixer
and Crane/concrete pump
Case II Per Cum Basic Cost of Labour, 9819.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 981.90
(a+b+c)
e) Contractor's profit @ 10 % on 1080.09
(a+b+c+d)
11880.99
Add 1% labour cess 118.81
Rate per cum = (a+b+c+d+e) 11999.80
Add 12% GST 1439.98
Rate per cum. 13439.78
say 13440.00
Labour Rate
Labour 3976.00
Overhead charges @ 10% 397.60
Contractors Profit @10% 437.36
4810.96
Add 1% labour cess 48.11
Cost for 120 cum 4859.07
Rate per cum 40.49
Add 12% GST 4.86
Rate per cum. 45.35
say 45.00
2.11 D Grade M30 PCC
(iii) Same as in bottom plug concrete,
excluding cost of forming sump,
protective bunds, chiseling etc.
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5784.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 578.40
(a+b+c)
e) Contractor's profit @ 10 % on 636.24
(a+b+c+d)
6998.64
Add 1% labour cess 69.99
Rate per cum = (a+b+c+d+e) 7068.63
Add 12% GST 848.24
Rate per cum. 7916.86
83
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 7917.00
Labour Rate
Labour 3993.50
Overhead charges @ 10% 399.35
Contractors Profit @10% 439.29
4832.14
Add 1% labour cess 48.32
Cost for 15 cum 4880.46
Rate per cum 325.36
Add 12% GST 39.04
Rate per cum. 364.41
say 364.00
2.11 D (iii) Using Batching Plant, Transit Mixer
and Crane/concrete pump
Case II Per Cum Basic Cost of Labour, 9863.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 986.30
(a+b+c)
e) Contractor's profit @ 10 % on 1084.93
(a+b+c+d)
11934.23
Add 1% labour cess 119.34
Rate per cum = (a+b+c+d+e) 12053.57
Add 12% GST 1446.43
Rate per cum. 13500.00
say 13500.00
Labour Rate
Labour 3976.00
Overhead charges @ 10% 397.60
Contractors Profit @10% 437.36
4810.96
Add 1% labour cess 48.11
Cost for 120 cum 4859.07
Rate per cum 40.49
Add 12% GST 4.86
Rate per cum. 45.35
say 45.00
2.11 Top plug
E Grade M15 PCC
(i) Same as Item 12.8(a) excluding
formwork
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 4356.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 435.60
(a+b+c)
84
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Contractor's profit @ 10 % on 479.16
(a+b+c+d)
5270.76
Add 1% labour cess 52.71
Rate per cum = (a+b+c+d+e) 5323.47
Add 12% GST 638.82
Rate per cum. 5962.28
say 5962.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 E Grade M20 PCC
(ii) Same as Item 12.8(b) excluding
formwork
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 4859.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 485.90
(a+b+c)
e) Contractor's profit @ 10 % on 534.49
(a+b+c+d)
5879.39
Add 1% labour cess 58.79
Rate per cum = (a+b+c+d+e) 5938.18
Add 12% GST 712.58
Rate per cum. 6650.77
say 6651.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
85
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 364.00
2.11 E Grade M25 PCC
(iii) Same as Item 12.8 (d) excluding
formwork
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5240.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 524.00
(a+b+c)
e) Contractor's profit @ 10 % on 576.40
(a+b+c+d)
6340.40
Add 1% labour cess 63.40
Rate per cum = (a+b+c+d+e) 6403.80
Add 12% GST 768.46
Rate per cum. 7172.26
say 7172.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 E (iii) Using Batching Plant, Transit Mixer
and Crane/concrete pump
Case II Per Cum Basic Cost of Labour, 9469.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 946.90
(a+b+c)
e) Contractor's profit @ 10 % on 1041.59
(a+b+c+d)
11457.49
Add 1% labour cess 114.57
Rate per cum = (a+b+c+d+e) 11572.06
Add 12% GST 1388.65
Rate per cum. 12960.71
say 12961.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
86
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 E Grade M30 PCC
(iv) Same as Item 12.8(f) excluding
formwork
Using Concrete Mixer
Case I Per Cum Basic Cost of Labour, 5281.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 528.10
(a+b+c)
e) Contractor's profit @ 10 % on 580.91
(a+b+c+d)
6390.01
Add 1% labour cess 63.90
Rate per cum = (a+b+c+d+e) 6453.91
Add 12% GST 774.47
Rate per cum. 7228.38
say 7228.00
Labour Rate
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 E (iv) Using Batching Plant, Transit Mixer
and Crane/concrete pump
Case II Per Cum Basic Cost of Labour, 9506.00
Material & Machinery (a+b+c)
d) Overhead charges @ 10 % on 950.60
(a+b+c)
e) Contractor's profit @ 10 % on 1045.66
(a+b+c+d)
11502.26
Add 1% labour cess 115.02
Rate per cum = (a+b+c+d+e) 11617.28
Add 12% GST 1394.07
87
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum. 13011.36
say 13011.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 Well cap
F RCC Grade M20
(i) Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 5.12 6875.00 35200.00
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Form Work @ 4 per cent of 2978.59
a+b+c
d) Overhead charges @ 10 % on 7744.33
(a+b+c)
e) Contractor's profit @ 10 % on 8518.77
(a+b+c+d)
93706.44
Add 1% labour cess 937.06
cost of 15 cum = a+b+c+d+e 94643.51
Rate per cum = (a+b+c+d+e)/15 6309.57
Add 12% GST 757.15
Rate per cum. 7066.72
say 7067.00
Labour Rate
88
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour 3986.50
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 F (i) Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 40.92 6875.00 281325.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader (capacity 1 cum) hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m
)
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Lead beyond 1 Km, L - lead in tonne.k 300L 1601.00 480300.00
Kilometer m
Concrete Pump hour 6.00 240.00 1440.00
Formwork @ 4 per cent of 44109.74
(a+b+c)
d) Overhead charges @ 10 % on 114685.32
(a+b+c)
e) Contractor's profit @ 10 % on 126153.86
(a+b+c+d)
1387692.42
Add 1% labour cess 13876.92
cost of 120 cum = a+b+c+d+e 1401569.34
Rate per cum = (a+b+c+d+e)/120 11679.74
Add 12% GST 1401.57
89
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum. 13081.31
say 13081.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 F RCC Grade M25
(ii) Using Concrete Mixer
Case I Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 6.05 6875.00 41593.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
Form Work @ 3.75 per cent of 3032.19
a+b+c
d) Overhead charges @ 10 % on 8389.07
(a+b+c)
e) Contractor's profit @ 10 % on 9227.98
(a+b+c+d)
101507.74
Add 1% labour cess 1015.08
cost of 15 cum = a+b+c+d+e 102522.82
Rate per cum = (a+b+c+d+e)/15 6834.85
Add 12% GST 820.18
Rate per cum. 7655.04
say 7655.00
Labour Rate
Labour 3986.50
90
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 324.79
Add 12% GST 38.98
Rate per cum. 363.77
say 364.00
2.11 F (ii) Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 48.40 6875.00 332750.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader (capacity 1 cum) hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Lead beyond 1 Km, L - lead in tonne.k 300L 1601.00 480300.00
Kilometer m
Concrete Pump hour 6.00 240.00 1440.00
Formwork @ 3.75 per cent of ( 43281.32
a+b+c)
d) Overhead charges @ 10 % on 119744.98
(a+b+c)
e) Contractor's profit @ 10 % on 131719.48
(a+b+c+d)
1448914.28
Add 1% labour cess 14489.14
cost of 120 cum = a+b+c+d+e 1463403.42
Rate per cum = (a+b+c+d+e)/120 12195.03
91
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 13658.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 F RCC Grade M30
(iii) Using Concrete Mixer
Case I Unit = cum
92
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 10% 398.65
Contractors Profit @10% 438.52
4823.67
Add 1% labour cess 48.24
Cost for 15 cum 4871.90
Rate per cum 211.78
Add 12% GST 25.41
Rate per cum. 237.19
say 237.00
2.11 F (iii) Using Batching Plant, Transit Mixer
and Concrete Pump
Case II Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 48.79 6875.00 335431.25
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
95
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 13741.00
Where ever concrete is carried out
using batching plant, transit mixer,
concrete pump, Admixtures @ 0.4
per cent of weight of cement may
be added for achieving desired
slump of concrete.
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.11 F Note RCC M40 Grade
(v) Using Batching Plant, Transit Mixer
and Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 52.20 6875.00 358875.00
Coarse Sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture kg 206.00 160.00 32960.00
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader 1 cum capacity hour 6.00 1321.00 7926.00
Transit Mixer 4 cum capacity for hour 15.00 1601.00 24015.00
lead upto 1 km.
Transit Mixer 4 cum capacity for tonne.k 300.L 1601.00 480300.00
lead beyond 1 km. m
Concrete Pump hour 6.00 240.00 1440.00
Formwork @ 3 per cent on cost 36397.61
of concrete i.e. cost of material,
labour and machinery
96
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Overhead charges @ 10 % on 124965.11
(a+b+c)
e) Contractor's profit @ 10 % on 137461.62
(a+b+c+d)
1512077.84
Add 1% labour cess 15120.78
cost of 120 cum = a+b+c+d+e 1527198.62
Rate per cum = (a+b+c+d+e)/120 12726.66
Add 12% GST 1527.20
Rate per cum. 14253.85
say 14254.00
Labour Rate
Labour 3969.00
Overhead charges @ 10% 396.90
Contractors Profit @10% 436.59
4802.49
Add 1% labour cess 48.02
Cost for 120 cum 4850.51
Rate per cum 40.42
Add 12% GST 4.85
Rate per cum. 45.27
say 45.00
2.12 Section Sinking of 6 m external diameter well
1200 (other than pneumatic method of
sinking) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
Unit = Running Meter.
Taking output = 1 m
Diameter of well - 6 m.
Sandy Soil
A Depth below bed level upto 3.0 M
(i) Rate of sinking = 0.50 m per hour.
a) Labour
Mate day 0.12 350.00 42.00
Sinker ( skilled ) day 1.00 350.00 350.00
Sinking helper ( semi-skilled ) day 2.00 350.00 700.00
b) Machinery
Hire & running charges of crane hour 2.00 1096.00 2192.00
with grab bucket of 0.75 cum
capacity and accessories.
97
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Consumables in sinking @10 per 219.20
cent of (b)
c) Overhead charges @ 10 % on 350.32
(a+b)
d) Contractor's profit @ 10 % on 385.35
(a+b+c)
4238.87
Add 1% labour cess 42.39
Rate per metre = (a+b+c+d) 4281.26
Add 12% GST 513.75
Rate per m. 4795.01
say 4795.00
Labour Rate
Labour 1092.00
Overhead charges @ 10% 109.20
Contractors Profit @10% 120.12
1321.32
Add 1% labour cess 13.21
Cost for 1 m 1321.32
Rate per m 1321.32
Add 12% GST 158.56
Rate per m. 1479.88
say 1480.00
2.12 A Beyond 3m upto 10m depth
(ii) Rate of sinking = 0.33 m per hour.
a) Labour
Mate day 0.15 350.00 52.50
Sinker day 1.25 350.00 437.50
Sinking helper ( semi-skilled ) day 2.50 350.00 875.00
b) Machinery
Hire & running charges of crane hour 3.00 1096.00 3288.00
with grab bucket of 0.75 cum
capacity and accessories
Consumables in sinking @10 per 328.80
cent of (b)
c) Overhead charges @ 10 % on 498.18
(a+b)
d) Contractor's profit @ 10 % on 548.00
(a+b+c)
6027.98
Add 1% labour cess 60.28
Rate per metre = (a+b+c+d) 6088.26
Add 12% GST 730.59
Rate per m. 6818.85
say 6819.00
Labour Rate
98
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour 1365.00
Overhead charges @ 10% 136.50
Contractors Profit @10% 150.15
1651.65
Add 1% labour cess 16.52
Cost for 1 m 1668.17
Rate per m 1668.17
Add 12% GST 200.18
Rate per m. 1868.35
say 1868.00
2.12 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 7160.00
12th m 5% 7518.00
13th m 5% 7894.00
14th m 5% 8289.00
15th m 5% 8703.00
16th m 5% 9138.00
17th m 5% 9595.00
18th m 5% 10075.00
19th m 5% 10579.00
20th m 5% 11108.00
Total Cost from 10m upto 20m 90059.00
Avg Rate per metre 9006.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 1752.00
12th m 5% 1840.00
13th m 5% 1932.00
14th m 5% 2029.00
15th m 5% 2130.00
16th m 5% 2237.00
17th m 5% 2349.00
18th m 5% 2466.00
19th m 5% 2589.00
20th m 5% 2718.00
Total Cost from 10m upto 20m 22042.00
Avg Rate per metre 2204.00
99
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.12 A Beyond 20m upto 30 m
(iv) Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
100
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
101
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Avg Rate per metre 9822.00 11787.00
102
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
Air compressor with pneumatic hour 2.00 488.00 976.00
chisel attachment for cutting
hard clay.
Consumables in sinking @ 10 755.20
per cent of (b)
c) Overhead charges @ 10 % on 1103.72
(a+b)
d) Contractor's profit @ 10 % on 1214.09
(a+b+c)
13355.01
Add 1% labour cess 133.55
Rate per metre = (a+b+c+d) 13488.56
Add 12% GST 1618.63
Rate per m. 15107.19
say 15107.00
Labour Rate
Labour 2730.00
Overhead charges @ 10% 273.00
Contractors Profit @10% 300.30
3303.30
Add 1% labour cess 33.03
Cost for 1 m 3336.33
Rate per m 3336.33
Add 12% GST 400.36
Rate per m. 3736.69
say 3737.00
2.12 B Beyond 10 m upto 20 m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
b 11th m 5% 15862.00 16655.00
12th m 5% 16655.00 17488.00
13th m 5% 17488.00 18362.00
14th m 5% 18362.00 19280.00
15th m 5% 19280.00 20244.00
16th m 5% 20244.00 21256.00
17th m 5% 21256.00 22319.00
18th m 5% 22319.00 23435.00
103
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
19th m 5% 23435.00 24607.00
20th m 5% 24607.00 25837.00
Total Cost from 10m upto 20m 199508.00 209483.00
104
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
27th m 7.5% 73108.00 91385.00 95954.00
28th m 7.5% 78591.00 98239.00 103151.00
29th m 7.5% 84485.00 105606.00 110886.00
30th m 7.5% 90821.00 113526.00 119202.00
Total Cost from 20m upto 30m 670157.00 837698.00 879582.00
105
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
35th m 10% 146267.00 175520.00 184296.00
36th m 10% 160894.00 193073.00 202727.00
37th m 10% 176983.00 212380.00 222999.00
38th m 10% 194681.00 233617.00 245298.00
39th m 10% 214149.00 256979.00 269828.00
40th m 10% 235564.00 282677.00 296811.00
Total Cost from 30m upto 40m 1592186.00 1910624.00 2006156.00
Avg Rate per metre 159219.00 191062.00 200616.00
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
2.12
C Soft Rock
Taking output = 1 m
Depth in Soft rock strata up to 3m
Rate of sinking = 0.25 m per hour.
a) Labour
Mate day 0.92 350.00 322.00
Sinker ( skilled ) day 3.00 350.00 1050.00
Sinking helper ( semi-skilled ) day 20.00 350.00 7000.00
Diver day 0.50 421.17 210.58
b) Machinery
106
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Hire & running charges of crane hour 4.00 1096.00 4384.00
with grab bucket of 0.75 cum
capacity and accessories.
Air compressor with pneumatic hour 3.50 488.00 1708.00
breakers
Consumables in sinking @ 10 609.20
per cent of (b)
Add for dewatering @ of 5 per 764.19
cent of (a+b), if required
c) Overhead charges @ 10 % on 1604.80
(a+b)
d) Contractor's profit @ 10 % on 1765.28
(a+b+c)
19418.05
Add 1% labour cess 194.18
Rate per metre = (a+b+c+d) 19612.23
Add 12% GST 2353.47
Rate per m. 21965.69
say 21966.00
Labour Rate
Labour 8582.58
Overhead charges @ 10% 858.26
Contractors Profit @10% 944.08
10384.93
Add 1% labour cess 103.85
Cost for 1 m 10488.78
Rate per m 10488.78
Add 12% GST 1258.65
Rate per m. 11747.43
say 11747.00
2.12 Hard Rock (6m dia well )
D Unit = Running Meter
Taking output = 1 m
Depth in hard rock strata upto 3 m
a) Material
Gelatine 80 per cent Kg 4.00 98.00 392.00
Electric Detonators each 18.00 16.00 288.00
b) Labour
Mate day 1.56 350.00 546.00
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 12.00 350.00 4200.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
107
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
c) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
108
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
A Depth below bed level upto 3.0 M
(i) Rate of sinking = 0.30 m per hour.
a) Labour
Mate day 0.15 350.00 52.50
Sinker ( skilled ) day 1.25 350.00 437.50
Sinking helper ( semi-skilled ) day 2.50 350.00 875.00
b) Machinery
Hire & running charges of crane hour 3.25 1096.00 3562.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 356.20
cent of (b)
c) Overhead charges @ 10 % on 528.32
(a+b)
d) Contractor's profit @ 10 % on 528.32
(a+b+c)
6339.84
Add 1% labour cess 63.40
Rate per metre = (a+b+c+d) 6403.24
Labour Rate
Labour 1365.00
Overhead charges @ 10% 136.50
Contractors Profit @10% 150.15
1651.65
Add 1% labour cess 16.52
Cost for 1 m 1668.17
Rate per m 525.55
Add 12% GST 63.07
Rate per m. 588.62
say 589.00
2.13 A Beyond 3m upto 10m depth
(ii) Rate of sinking = 0.22 m per hour.
a) Labour
Mate day 0.18 350.00 63.00
Sinker day 1.50 350.00 525.00
Sinking helper ( semi-skilled ) day 3.00 350.00 1050.00
b) Machinery
Hire & running charges of crane hour 4.50 1096.00 4932.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 493.20
cent of (b)
c) Overhead charges @ 10 % on 706.32
(a+b)
109
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Contractor's profit @ 10 % on 776.95
(a+b+c)
8546.47
Add 1% labour cess 85.46
Rate per metre = (a+b+c+d) 8631.94
Add 12% GST 1035.83
Rate per m. 9667.77
say 9668.00
Labour Rate
Labour 1638.00
Overhead charges @ 10% 163.80
Contractors Profit @10% 180.18
1981.98
Add 1% labour cess 19.82
Cost for 1 m 2001.80
Rate per m 2001.80
Add 12% GST 240.22
Rate per m. 2242.02
say 2242.00
2.13 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 10151.00
12th m 5% 10659.00
13th m 5% 11192.00
14th m 5% 11752.00
0.165 15th m 5% 12340.00
16th m 5% 12957.00
17th m 5% 13605.00
18th m 5% 14285.00
19th m 5% 14999.00
20th m 5% 15749.00
Total Cost from 10m upto 20m 127689.00
Avg Rate per metre 12769.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 2354.00
12th m 5% 2472.00
13th m 5% 2596.00
14th m 5% 2726.00
110
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
15th m 5% 2862.00
16th m 5% 3005.00
17th m 5% 3155.00
18th m 5% 3313.00
19th m 5% 3479.00
20th m 5% 3653.00
Total Cost from 10m upto 20m 29615.00
Avg Rate per metre 2962.00
111
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
26th m 7.5% 5638.00 6766.00
27th m 7.5% 6061.00 7273.00
28th m 7.5% 6516.00 7819.00
29th m 7.5% 7005.00 8406.00
30th m 7.5% 7530.00 9036.00
Total Cost from 20m upto 30m 55562.00 66674.00
Avg Rate per metre 5556.00 6667.00
2.13 A Beyond 30m upto 40 m
(v) Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
112
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
38th m 10% 16140.00 19368.00
39th m 10% 17754.00 21305.00
40th m 10% 19529.00 23435.00
Total Cost from 30m upto 40m 132001.00 158402.00
Avg Rate per metre 13200.00 15840.00
114
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
13th m 5% 14357.00 15075.00
14th m 5% 15075.00 15829.00
15th m 5% 15829.00 16620.00
16th m 5% 16620.00 17451.00
17th m 5% 17451.00 18324.00
18th m 5% 18324.00 19240.00
19th m 5% 19240.00 20202.00
20th m 5% 20202.00 21212.00
Total Cost from 10m upto 20m 163793.00 171983.00
Avg Rate per metre 16379.00 17198.00
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
115
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b Add 25 per cent of cost for Including 25% Including 5% for
Kentledge including supports, for Kentledge dewatering, if
loading arrangement and Labour ). required
c 21st m 7.5% 21717.00 27146.00 28503.00
22nd 7.5% 23346.00 29183.00 30642.00
23rd m 7.5% 25097.00 31371.00 32940.00
24th m 7.5% 26979.00 33724.00 35410.00
25th m 7.5% 29002.00 36253.00 38066.00
26th m 7.5% 31177.00 38971.00 40920.00
27th m 7.5% 33515.00 41894.00 43989.00
28th m 7.5% 36029.00 45036.00 47288.00
29th m 7.5% 38731.00 48414.00 50835.00
30th m 7.5% 41636.00 52045.00 54647.00
Total Cost from 30m upto 40m 307229.00 384037.00 403240.00
Avg Rate per metre 30723.00 38404.00 40324.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
116
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
(v) Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
117
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
119
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.14 Section Sinking of 8 m external diameter well
1200 ( other than pneumatic method of
sinking ) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
b) Machinery
Hire & running charges of crane hour 4.00 1096.00 4384.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 438.40
cent of (b)
c) Overhead charges @ 10 % on 646.04
(a+b)
d) Contractor's profit @ 10 % on 710.64
(a+b+c)
7817.08
Add 1% labour cess 78.17
Rate per metre = (a+b+c+d) 7895.25
Add 12% GST 947.43
Rate per m. 8842.69
say 8843.00
Labour Rate
Labour 2746.02
Overhead charges @ 10% 274.60
Contractors Profit @10% 302.06
3322.68
Add 1% labour cess 33.23
Cost for 1 m 3355.91
Rate per m 3355.91
Add 12% GST 402.71
Rate per m. 3758.62
120
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 3759.00
2.14 A Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.20 m/hour
a) Labour
Mate day 0.25 350.00 87.50
Sinker day 1.75 350.00 612.50
Sinking helper ( semi-skilled ) day 3.50 350.00 1225.00
b) Machinery
Hire & running charges of crane hour 5.00 1096.00 5480.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 548.00
cent of (b)
c) Overhead charges @ 10 % on 795.30
(a+b)
d) Contractor's profit @ 10 % on 874.83
(a+b+c)
9623.13
Add 1% labour cess 96.23
Rate per metre = (a+b+c+d) 9719.36
Add 12% GST 1166.32
Rate per m. 10885.68
say 10886.00
Labour Rate
Labour 1925.00
Overhead charges @ 5% 96.25
Contractors Profit @10% 202.13
2223.38
Add 1% labour cess 22.23
Cost for 1 m 2223.38
Rate per m 2223.38
Add 12% GST 266.81
Rate per m. 2490.18
say 2490.00
2.14 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 10205.00
12th m 5% 10715.00
13th m 5% 11251.00
14th m 5% 11814.00
15th m 5% 12405.00
16th m 5% 13025.00
17th m 5% 13676.00
121
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
18th m 5% 14360.00
19th m 5% 15078.00
20th m 5% 15832.00
Total Cost from 10m upto 20m 128361.00
Avg Rate per metre 12836.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 2615.00
12th m 5% 2746.00
13th m 5% 2883.00
14th m 5% 3027.00
15th m 5% 3178.00
16th m 5% 3337.00
17th m 5% 3504.00
18th m 5% 3679.00
19th m 5% 3863.00
20th m 5% 4056.00
Total Cost from 10m upto 20m 32888.00
122
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
30th m 7.5% 32629.00 39155.00
Total Cost from 20m upto 30m 240766.00 288920.00
Avg Rate per metre 24077.00 28892.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
123
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
40th m 10% 84630.00 101556.00
Total Cost from 30m upto 40m 57201.90 68642.00
124
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Contractor's profit @ 10 % on 949.61
(a+b+c)
10445.69
Add 1% labour cess 104.46
Rate per metre = (a+b+c+d) 10550.14
Add 12% GST 1266.02
Rate per m. 11816.16
say 11816.00
Labour Rate
Labour 2002.00
Overhead charges @ 10% 200.20
Contractors Profit @10% 220.22
2422.42
Add 1% labour cess 24.22
Cost for 1 m 2446.64
Rate per m 2446.64
Add 12% GST 293.60
Rate per m. 2740.24
say 2740.00
2.14 B Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.17 m/hour
a) Labour
Mate day 0.32 350.00 112.00
Sinker day 2.50 350.00 875.00
Sinking helper ( semi-skilled ) day 4.50 350.00 1575.00
b) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
126
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
14th m 5% 4262.00 4475.00
15th m 5% 4475.00 4699.00
16th m 5% 4699.00 4934.00
17th m 5% 4934.00 5181.00
18th m 5% 5181.00 5440.00
19th m 5% 5440.00 5712.00
20th m 5% 5712.00 5998.00
Total Cost from 10m upto 20m 46310.00 48626.00
Avg Rate per metre 4631.00 4863.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
127
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 25 per cent of cost for Including 25% Including 5% for
Kentledge including supports, for Kentledge dewatering, if
loading arrangement and Labour ). required
21st m 7.5% 6140.00 7675.00 8059.00
22nd m 7.5% 6601.00 8251.00 8664.00
23rd m 7.5% 7096.00 8870.00 9314.00
24th m 7.5% 7628.00 9535.00 10012.00
25th m 7.5% 8200.00 10250.00 10763.00
26th m 7.5% 8815.00 11019.00 11570.00
27th m 7.5% 9476.00 11845.00 12437.00
28th m 7.5% 10187.00 12734.00 13371.00
29th m 7.5% 10951.00 13689.00 14373.00
30th m 7.5% 11772.00 14715.00 15451.00
Total Cost from 30m upto 40m 86866.00 108583.00 114014.00
Avg Rate per metre 8687.00 10858.00 11401.00
Labour Rate
Beyond 30m upto 40 m
128
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
129
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Contractor's profit @ 10 % on 1651.67
(a+b+c)
18168.36
Add 1% labour cess 181.68
Rate per metre = (a+b+c+d) 18350.05
Add 12% GST 2202.01
Rate per m. 20552.05
say 20552.00
Labour Rate
Labour 6259.17
Overhead charges @ 10% 625.92
Contractors Profit @10% 688.51
7573.59
Add 1% labour cess 75.74
Cost for 1 m 7649.33
Rate per m 7649.33
Add 12% GST 917.92
Rate per m. 8567.25
say 8567.00
2.14 Hard Rock ( 8m dia well )
D Unit = Running Meter
Taking output = 1 m
Depth in hard rock strata upto 3 m
Rate of sinking @ 0.17 m/hour
a) Material
Gelatine 80 per cent Kg 8.00 98.00 784.00
Electric Detonators each 32.00 16.00 512.00
b) Labour
Mate day 1.09 350.00 381.50
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 20.00 350.00 7000.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
c) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
130
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Consumables in sinking @ 10 958.24
per cent of cost of (b).
d) Overhead charges @ 10 % on 2024.54
(a+b+c)
e) Contractor's profit @ 10 % on 2226.99
(a+b+c+d)
24496.91
Add 1% labour cess 244.97
Rate per metre = (a+b+c+d+e) 24741.88
Add 12% GST 2969.03
Rate per m. 27710.90
say 27711.00
Labour Rate
Labour 3200.26
Overhead charges @ 10% 320.03
Contractors Profit @10% 352.03
3872.31
Add 1% labour cess 38.72
Cost for 1 m 3911.04
Rate per m 3911.04
Add 12% GST 469.32
Rate per m. 4380.36
say 4380.00
2.15 Section Sinking of 9 m external diameter well
1200 ( other than pneumatic method of
sinking ) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
b) Machinery
131
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Hire & running charges of crane hour 4.00 1096.00 4384.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 438.40
cent of (b)
c) Overhead charges @ 10 % on 655.14
(a+b)
d) Contractor's profit @ 10 % on 720.65
(a+b+c)
7927.19
Add 1% labour cess 79.27
Rate per metre = (a+b+c+d) 8006.47
Add 12% GST 960.78
Rate per m. 8967.24
say 8967.00
Labour Rate
Labour 1729.00
Overhead charges @ 10% 172.90
Contractors Profit @10% 190.19
2092.09
Add 1% labour cess 20.92
Cost for 1 m 2113.01
Rate per m 2113.01
Add 12% GST 253.56
Rate per m. 2366.57
say 2367.00
2.15 A Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.18 m/hour
a) Labour
Mate day 0.27 350.00 94.50
Sinker day 1.75 350.00 612.50
Sinking helper ( semi-skilled ) day 4.00 350.00 1400.00
b) Machinery
Hire & running charges of crane hour 5.50 1096.00 6028.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 602.80
cent of (b)
c) Overhead charges @ 10 % on 873.78
(a+b)
d) Contractor's profit @ 10 % on 961.16
(a+b+c)
10572.74
Add 1% labour cess 105.73
Rate per metre = (a+b+c+d) 10678.47
Add 12% GST 1281.42
132
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m. 11959.88
say 11960.00
Labour Rate
Labour 702.35
Overhead charges @ 10% 70.24
Contractors Profit @10% 77.26
849.84
Add 1% labour cess 8.50
Cost for 1 m 858.34
Rate per m 858.34
Add 12% GST 103.00
Rate per m. 961.34
say 961.00
2.15 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 11212.00
12th m 5% 11773.00
13th m 5% 12362.00
14th m 5% 12980.00
15th m 5% 13629.00
16th m 5% 14310.00
17th m 5% 15026.00
18th m 5% 15777.00
19th m 5% 16566.00
20th m 5% 17394.00
Total Cost from 10m upto 20m 141029.00
Avg Rate per metre 14103.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 1009.00
12th m 5% 1059.00
13th m 5% 1112.00
14th m 5% 1168.00
15th m 5% 1226.00
16th m 5% 1287.00
17th m 5% 1351.00
18th m 5% 1419.00
19th m 5% 1490.00
133
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
20th m 5% 1565.00
Total Cost from 10m upto 20m 12686.00
Avg Rate per metre 1269.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
134
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
29th m 7.5% 3001.00 3601.00
30th m 7.5% 3226.00 3871.00
Total Cost from 20m upto 30m 23803.00 28562.00
Avg Rate per metre 2380.00 2856.00
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
135
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
36th m 10% 5715.00 6858.00
37th m 10% 6287.00 7544.00
38th m 10% 6916.00 8299.00
39th m 10% 7608.00 9130.00
40th m 10% 8369.00 10043.00
Total Cost from 30m upto 40m 56560.00 67873.00
b) Machinery
Hire & running charges of crane hour 5.75 1096.00 6302.00
with grab bucket of 0.75 cum
capacity and accessories.
136
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 1 m 2669.07
Rate per m 2669.07
Add 12% GST 320.29
Rate per m. 2989.36
say 2989.00
2.15 B Beyond 3m upto 10m depth
(ii) Rate of sinking 0.15 m / hour
a) Labour
Mate day 0.34 350.00 119.00
Sinker day 2.50 350.00 875.00
Sinking helper ( semi-skilled ) day 5.00 350.00 1750.00
b) Machinery
Hire & running charges of crane hour 6.50 1096.00 7124.00
with grab bucket of 0.75 cum
capacity and accessories.
138
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
(iv) Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
139
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Avg Rate per metre 9303.00 11629.00 12210.00
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
140
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
40th m 10% 32704.00 39245.00 41207.00
Total Cost from 30m upto 40m 221044.00 265252.00 278514.00
Avg Rate per metre 22104.00 26525.00 27851.00
Labour 7071.40
Overhead charges @ 10% 707.14
Contractors Profit @10% 777.85
8556.39
Add 1% labour cess 85.56
Cost for 1 m 8641.96
Rate per m 8641.96
141
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 1037.04
Rate per m. 9679.00
say 9679.00
2.15 Hard Rock ( 9m dia well )
D Unit = Running Meter
Taking output = 1 m
Depth in hard rock strata upto 3 m
Rate of sinking 0.15 m / hour
a) Material
Gelatine 80 per cent Kg 10.00 98.00 980.00
Electric Detonators each 40.00 16.00 640.00
b) Labour
Mate day 1.17 350.00 409.50
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 22.00 350.00 7700.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
Diver day 1.00 421.17 421.17
c) Machinery
Hire & running charges of crane hour 7.00 1096.00 7672.00
with grab bucket of 0.75 cum
capacity and accessories.
Hire & running charges of hour 2.50 488.00 1220.00
compressor with pneumatic
breaker/Jack hammer for drilling.
142
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 129.85
Cost for 1 m 13115.07
Rate per m 13115.07
Add 12% GST 1573.81
Rate per m. 14688.88
say 14689.00
2.16 1200 Sinking of 10 m external diameter
well ( other than pneumatic method
of sinking ) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
143
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2202.20
Add 1% labour cess 22.02
Cost for 1 m 2224.22
Rate per m 2224.22
Add 12% GST 266.91
Rate per m. 2491.13
say 2491.00
2.16 A Beyond 3m upto 10m depth
(ii) Rate of sinking 0.17 m / hour
a) Labour
Mate day 0.31 350.00 108.50
Sinker day 2.00 350.00 700.00
Sinking helper ( semi-skilled ) day 4.25 350.00 1487.50
b) Machinery
Hire & running charges of crane hour 5.75 1096.00 6302.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 630.20
cent of (b)
c) Overhead charges @ 10 % on 922.82
(a+b)
d) Contractor's profit @ 10 % on 1015.10
(a+b+c)
11166.12
Add 1% labour cess 111.66
Rate per metre = (a+b+c+d) 11277.78
Add 12% GST 1353.33
Rate per m. 12631.12
say 12631.00
Labour Rate
Labour 2296.00
Overhead charges @ 10% 229.60
Contractors Profit @10% 252.56
2778.16
Add 1% labour cess 27.78
Cost for 1 m 2805.94
Rate per m 2805.94
Add 12% GST 336.71
Rate per m. 3142.65
say 3143.00
2.16 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 11842.00
144
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
12th m 5% 12434.00
13th m 5% 13056.00
14th m 5% 13709.00
15th m 5% 14394.00
16th m 5% 15114.00
17th m 5% 15870.00
18th m 5% 16664.00
19th m 5% 17497.00
20th m 5% 18372.00
Total Cost from 10m upto 20m 148952.00
Avg Rate per metre 14895.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 3300.00
12th m 5% 3465.00
13th m 5% 3638.00
14th m 5% 3820.00
15th m 5% 4011.00
16th m 5% 4212.00
17th m 5% 4423.00
18th m 5% 4644.00
19th m 5% 4876.00
20th m 5% 5120.00
Total Cost from 10m upto 20m 41509.00
Avg Rate per metre 4151.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
147
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Consumables in sinking @ 10 657.60
per cent of (b)
c) Overhead charges @ 10 % on 1012.11
(a+b)
d) Contractor's profit @ 10 % on 1113.32
(a+b+c)
12246.53
Add 1% labour cess 122.47
Rate per metre = (a+b+c+d) 12369.00
Add 12% GST 1484.28
Rate per m. 13853.28
say 13853.00
Labour Rate
Labour 2887.50
Overhead charges @ 10% 288.75
Contractors Profit @10% 317.63
3493.88
Add 1% labour cess 34.94
Cost for 1 m 3528.81
Rate per m 3528.81
Add 12% GST 423.46
Rate per m. 3952.27
say 3952.00
2.16 B Beyond 3m upto 10m depth
(ii) Rate of sinking 0.15m/hour.
a) Labour
Mate day 0.40 350.00 140.00
Sinker day 3.00 350.00 1050.00
Sinking helper ( semi-skilled ) day 5.50 350.00 1925.00
b) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
Air compressor with pneumatic hour 4.00 488.00 1952.00
chisel attachment for cutting
hard clay
Consumables in sinking @ 10 852.80
per cent of (b)
c) Overhead charges @ 10 % on 1249.58
(a+b)
d) Contractor's profit @ 10 % on 1374.54
(a+b+c)
15119.92
Add 1% labour cess 151.20
Rate per metre = (a+b+c+d) 15271.12
Add 12% GST 1832.53
148
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m. 17103.65
say 17104.00
Labour Rate
Labour 3115.00
Overhead charges @ 10% 311.50
Contractors Profit @10% 342.65
3769.15
Add 1% labour cess 37.69
Cost for 1 m 3806.84
Rate per m 3806.84
Add 12% GST 456.82
Rate per m. 4263.66
say 4264.00
2.16 B Beyond 10 m upto 20 m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for dewatering @ 5%
cost, if required. of cost, if required
11th m 5% 4477.00 4701.00
12th m 5% 4701.00 4936.00
149
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
13th m 5% 4936.00 5183.00
14th m 5% 5183.00 5442.00
15th m 5% 5442.00 5714.00
16th m 5% 5714.00 6000.00
17th m 5% 6000.00 6300.00
18th m 5% 6300.00 6615.00
19th m 5% 6615.00 6946.00
20th m 5% 6946.00 7293.00
Total Cost from 10m upto 20m 56314.00 59130.00
Avg Rate per metre 5631.00 5913.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
150
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 25 per cent of cost for Including 25% Including 5% for
Kentledge including supports, for Kentledge dewatering, if
loading arrangement and Labour ). required
21st m 7.5% 7467.00 9334.00 9801.00
22nd m 7.5% 8027.00 10034.00 10536.00
23rd m 7.5% 8629.00 10786.00 11325.00
24th m 7.5% 9276.00 11595.00 12175.00
25th m 7.5% 9972.00 12465.00 13088.00
26th m 7.5% 10720.00 13400.00 14070.00
27th m 7.5% 11524.00 14405.00 15125.00
28th m 7.5% 12388.00 15485.00 16259.00
29th m 7.5% 13317.00 16646.00 17478.00
30th m 7.5% 14316.00 17895.00 18790.00
Total Cost from 30m upto 40m 105636.00 132045.00 138647.00
Avg Rate per metre 10564.00 13205.00 13865.00
Labour Rate
Beyond 30m upto 40 m
151
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
152
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Contractor's profit @ 10 % on 2106.20
(a+b+c)
23168.19
Add 1% labour cess 231.68
Rate per metre = (a+b+c+d) 23399.87
Add 12% GST 2807.98
Rate per m. 26207.85
say 26208.00
Labour Rate
Labour 7890.63
Overhead charges @ 10% 789.06
Contractors Profit @10% 867.97
9547.67
Add 1% labour cess 95.48
Cost for 1 m 9643.14
Rate per m 9643.14
Add 12% GST 1157.18
Rate per m. 10800.32
say 10800.00
2.16 Hard Rock (10m dia well )
D Unit = Running Meter.
Taking output = 1 m
Depth in hard rock strata upto 3 m
Rate of sinking 0.12 m/ hour.
a) Material
Gelatine 80 per cent Kg 11.00 98.00 1078.00
Electric Detonators each. 44.00 16.00 704.00
b) Labour
Mate day 1.27 350.00 444.50
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 24.00 350.00 8400.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
c) Machinery
Hire & running charges of crane hour 8.50 1096.00 9316.00
with grab bucket of 0.75 cum
capacity and accessories.
Hire & running charges of hour 3.00 488.00 1464.00
compressor with pneumatic
breaker/Jack hammer or drill
Dewatering @ 5 per cent of cost 539.00
(c), if required.
Consumables in sinking @ 10 2236.44
per cent of cost of (b+c).
153
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Overhead charges @ 10 % on 2638.29
(a+b+c)
e) Contractor's profit @ 10 % on 2902.11
(a+b+c+d)
31923.26
Add 1% labour cess 319.23
Rate per metre = (a+b+c+d+e) 32242.49
Add 12% GST 3869.10
Rate per m. 36111.59
say 36112.00
Labour Rate
Labour 11045.42
Overhead charges @ 10% 1104.54
Contractors Profit @10% 1215.00
13364.95
Add 1% labour cess 133.65
Cost for 1 m 13498.60
Rate per m 13498.60
Add 12% GST 1619.83
Rate per m. 15118.43
say 15118.00
2.17 1200 Sinking of 11 m external diameter
well ( other than pneumatic method
of sinking ) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
154
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Consumables in sinking @10 per 657.60
cent of (b)
d) Overhead charges @ 10 % on 898.71
(a+b+c)
e) Contractor's profit @ 10 % on 988.58
(a+b+c+d)
10874.39
Add 1% labour cess 108.74
Cost for 0.5m = a+b+c+d 10983.13
Rate per metre = (a+b+c+d)/0.50 21966.27
Add 12% GST 2635.95
Rate per m. 24602.22
say 24602.00
Labour Rate
Labour 1753.50
Overhead charges @ 10% 175.35
Contractors Profit @10% 192.89
2121.74
Add 1% labour cess 21.22
Cost for 1 m 2142.95
Rate per m 2142.95
Add 12% GST 257.15
Rate per m. 2400.10
say 2400.00
2.17 A Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.13 m/hour
a) Labour
Mate day 0.32 350.00 112.00
Sinker day 2.00 350.00 700.00
Sinking helper (semi-skilled) day 4.50 350.00 1575.00
b) Machinery
Hire & running charges of crane hour 4.00 1096.00 4384.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 438.40
cent of (b)
c) Overhead charges @ 10 % on 720.94
(a+b+c)
d) Contractor's profit @ 10 % on 793.03
(a+b+c+d)
8723.37
Add 1% labour cess 87.23
Cost for 0.5m = a+b+c+d 8810.61
Rate per metre = (a+b+c+d)/0.50 17621.22
Add 12% GST 2114.55
155
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m. 19735.76
say 19736.00
Labour Rate
Labour 2387.00
Overhead charges @ 10% 238.70
Contractors Profit @10% 262.57
2888.27
Add 1% labour cess 28.88
Cost for 1 m 2917.15
Rate per m 2917.15
Add 12% GST 350.06
Rate per m. 3267.21
say 3267.00
2.17 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 18502.00
12th m 5% 19427.00
13th m 5% 20398.00
14th m 5% 21418.00
15th m 5% 22489.00
16th m 5% 23613.00
17th m 5% 24794.00
18th m 5% 26034.00
19th m 5% 27336.00
20th m 5% 28703.00
Total Cost from 10m upto 20m 232714.00
Avg Rate per metre 23271.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 3430.00
12th m 5% 3602.00
13th m 5% 3782.00
14th m 5% 3971.00
15th m 5% 4170.00
16th m 5% 4379.00
17th m 5% 4598.00
156
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
18th m 5% 4828.00
19th m 5% 5069.00
20th m 5% 5322.00
Total Cost from 10m upto 20m 43151.00
Avg Rate per metre 4315.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
158
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
36th m 10% 19432.00 23318.00
37th m 10% 21375.00 25650.00
38th m 10% 23513.00 28216.00
39th m 10% 25864.00 31037.00
40th m 10% 28450.00 34140.00
Total Cost from 30m upto 40m 192294.00 230753.00
Avg Rate per metre 19229.00 23075.00
159
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 1 m 2891.49
Rate per m 2891.49
Add 12% GST 346.98
Rate per m. 3238.47
say 3238.00
2.17 B Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.08 m/hour
a) Labour
Mate day 0.43 350.00 150.50
Sinker day 3.50 350.00 1225.00
Sinking helper (semi-skilled) day 5.75 350.00 2012.50
b) Machinery
Hire & running charges of crane hour 6.00 1096.00 6576.00
with grab bucket of 0.75 cum
capacity and accessories.
160
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
161
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
164
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 105.90
Cost for 1 m 10695.51
Rate per m 10695.51
Add 12% GST 1283.46
Rate per m. 11978.97
say 11979.00
2.17 Hard Rock (11m dia well )
D Unit = Running Meter.
Taking output = 0.50 m
Depth in hard rock upto 3 m
Rate of sinking @ 0.05 m/hour
a) Material
Gelatine 80 per cent Kg 12.00 98.00 1176.00
Electric Detonators each. 48.00 16.00 768.00
b) Labour
Mate day 1.35 350.00 472.50
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 26.00 350.00 9100.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
c) Machinery
Hire & running charges of crane hour 10.00 1096.00 10960.00
with grab bucket of 0.75 cum
capacity and accessories.
Hire & running charges of hour 3.50 488.00 1708.00
compressor with pneumatic
breaker/Jack hammer or drill
Dewatering @ 5 per cent of cost 633.40
(c), if required.
Consumables in sinking @ 10 2444.14
per cent of cost of (b+c).
d) Overhead charges @ 10 % on 2946.30
(a+b+c)
e) Contractor's profit @ 10 % on 3240.93
(a+b+c+d)
35650.18
Add 1% labour cess 356.50
Cost for 0.5m = a+b+c+d 36006.68
Rate per metre = (a+b+c+d)/0.50 72013.36
Add 12% GST 8641.60
Rate per m. 80654.97
say 80655.00
Labour Rate
Labour 11773.42
165
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Overhead charges @ 10% 1177.34
Contractors Profit @10% 1295.08
14245.83
Add 1% labour cess 142.46
Cost for 1 m 14388.29
Rate per m 14388.29
Add 12% GST 1726.59
Rate per m. 16114.88
say 16115.00
2.18 1200 Sinking of 12 m external diameter
well ( other than pneumatic method
of sinking ) through all types of strata
namely sandy soil, clayey soil and
rock as shown against each case,
complete as per drawing and
technical specifications. Depth of
sinking is reckoned from bed level.
166
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m. 51044.05
say 51044.00
Labour Rate
Labour 2089.50
Overhead charges @ 10% 208.95
Contractors Profit @10% 229.85
2528.30
Add 1% labour cess 25.28
Cost for 1 m 2553.58
Rate per m 2553.58
Add 12% GST 306.43
Rate per m. 2860.01
say 2860.00
2.18 A Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.038 m/hour
a) Labour
Mate day 0.37 350.00 129.50
Sinker day 2.50 350.00 875.00
Sinking helper (semi-skilled) day 4.75 350.00 1662.50
b) Machinery
Hire & running charges of crane hour 6.50 1096.00 7124.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 712.40
cent of (b)
c) Overhead charges @ 10 % on 1050.34
(a+b)
d) Contractor's profit @ 10 % on 1155.37
(a+b+c)
12709.11
Add 1% labour cess 127.09
Cost for 0.25m = a+b+c+d 12836.21
Rate per metre = (a+b+c+d)/0.25 51344.82
Add 12% GST 6161.38
Rate per m. 57506.20
say 57506.00
Labour Rate
Labour 2667.00
Overhead charges @ 10% 266.70
Contractors Profit @10% 293.37
3227.07
Add 1% labour cess 32.27
Cost for 1 m 3259.34
Rate per m 3259.34
167
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 391.12
Rate per m. 3650.46
say 3650.00
2.18 A Beyond 10m upto 20m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 60381.00
12th m 5% 63400.00
13th m 5% 66570.00
14th m 5% 69898.50
15th m 5% 73393.43
16th m 5% 77063.10
17th m 5% 80916.25
18th m 5% 84962.06
19th m 5% 89210.17
20th m 5% 93670.68
Total Cost from 10m upto 20m 759465.18
Avg Rate per metre 75947.00
Labour Rate
Beyond 10m upto 20m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 3833.00
12th m 5% 4025.00
13th m 5% 4226.25
14th m 5% 4437.56
15th m 5% 4659.44
16th m 5% 4892.41
17th m 5% 5137.03
18th m 5% 5393.88
19th m 5% 5663.58
20th m 5% 5946.76
Total Cost from 10m upto 20m 48214.92
Avg Rate per metre 4821.00
168
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a Add 20 per cent of cost for Including 20%
Kentledge including supports, for Kentledge
loading arrangement and Labour.
b 21st m 7.5% 100696.00 120835.00
22nd m 7.5% 108248.00 129898.00
23rd m 7.5% 116367.00 139640.00
24th m 7.5% 125095.00 150114.00
25th m 7.5% 134477.00 161372.00
26th m 7.5% 144563.00 173476.00
27th m 7.5% 155405.00 186486.00
28th m 7.5% 167060.00 200472.00
29th m 7.5% 179590.00 215508.00
30th m 7.5% 193059.00 231671.00
Total Cost from 20m upto 30m 1424560.00 1709472.00
Avg Rate per metre 142456.00 170947.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
169
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
(v) Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
170
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.18 Clayey Soil (12 m dia. Well )
B Unit = Running Meter.
Taking output = 0.25 meter.
Depth below bed level upto 3.0 M
171
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Machinery
Hire & running charges of crane hour 8.33 1096.00 9129.68
with grab bucket of 0.75 cum
capacity and accessories.
Air compressor with pneumatic hour 4.50 488.00 2196.00
chisel attachment for cutting
hard clay.
Consumables in sinking @ 10 1132.57
per cent of (b)
c) Overhead charges @ 10 % on 1603.87
(a+b)
d) Contractor's profit @ 10 % on 1764.26
(a+b+c)
19406.89
Add 1% labour cess 194.07
Cost for 0.25m = a+b+c+d 19600.95
Rate per metre = (a+b+c+d)/0.25 78403.82
Add 12% GST 9408.46
Rate per m. 87812.27
say 87812.00
Labour Rate
Labour 3580.50
Overhead charges @ 10% 358.05
Contractors Profit @10% 393.86
4332.41
Add 1% labour cess 43.32
Cost for 1 m 4375.73
Rate per m 4375.73
Add 12% GST 525.09
Rate per m. 4900.82
say 4901.00
2.18 B Beyond 10 m upto 20 m
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
172
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
16th m 5% 105068.00 110321.00
17th m 5% 110321.00 115837.00
18th m 5% 115837.00 121629.00
19th m 5% 121629.00 127710.00
20th m 5% 127710.00 134096.00
Total Cost from 10m upto 20m 1035456.00 1087228.00
Avg Rate per metre 103546.00 108723.00
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Labour Rate
Beyond 30m upto 40 m
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
176
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Gelatine80 per cent Kg 14.00 98.00 1372.00
Electric detonator each. 56.00 16.00 896.00
b) Labour
Mate day 1.44 350.00 504.00
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 28.00 350.00 9800.00
Mazdoor (Skilled) day 4.50 350.00 1575.00
c) Machinery
Hire & running charges of crane hour 12.50 1096.00 13700.00
with grab bucket of 0.75 cum
capacity and accessories.
Hire & running charges of hour 4.00 488.00 1952.00
compressor with pneumatic
breaker/Jack hammer or drill
Dewatering @ 5 per cent, if 782.60
required.
Consumables in sinking @ 10 1643.46
per cent of (c).
d) Overhead charges @ 10 % on 3302.60
(a+b+c)
e) Contractor's profit @ 10 % on 3632.86
(a+b+c+d)
39961.43
Add 1% labour cess 399.61
Cost for 0.25m = a+b+c+d+e 40361.05
Rate per metre = (a+b+c+d+e)/0.25 161444.18
177
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.19 1200 Sinking of Twin D Type well (other
than pneumatic method of sinking)
through all types of strata namely
sandy soil, clayey soil and rock as
shown against each case, complete
as per drawing and technical
specifications. Depth of sinking is
reckoned from bed level.
Unit = Running Meter
Taking output = 1 m
Dimensions of well.
Overall length = 12 m
Overall width = 6 m
Sandy Soil
A Depth from bed level upto 3.0 M
(i) Rate of sinking @ 0.18 m/hour
a) Labour
Mate day 0.20 350.00 70.00
Sinker ( skilled ) day 1.25 350.00 437.50
Sinking helper (semi-skilled) day 3.75 350.00 1312.50
b) Machinery
Hire & running charges of crane hour 5.50 1096.00 6028.00
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 602.80
cent of (b)
c) Overhead charges @ 10 % on 845.08
(a+b)
d) Contractor's profit @ 10 % on 929.59
(a+b+c)
10225.47
Add 1% labour cess 102.25
Rate per metre = (a+b+c+d) 10327.72
Add 12% GST 1239.33
Rate per m. 11567.05
say 11567.00
Labour Rate
Labour 1820.00
Overhead charges @ 10% 182.00
Contractors Profit @10% 200.20
2202.20
Add 1% labour cess 22.02
Cost for 1 m 2224.22
Rate per m 2224.22
178
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 266.91
Rate per m. 2491.13
say 2491.00
2.19 A Beyond 3m upto 10m depth
(ii) Rate of sinking @ 0.17 m/hour
a) Labour
Mate day 0.30 350.00 105.00
Sinker day 1.50 350.00 525.00
Sinking helper (semi-skilled) day 4.00 350.00 1400.00
b) Machinery
Hire & running charges of crane hour 5.88 1096.00 6444.48
with grab bucket of 0.75 cum
capacity and accessories.
Consumables in sinking @10 per 644.45
cent of (b)
c) Overhead charges @ 10 % on 911.89
(a+b)
d) Contractor's profit @ 10 % on 1003.08
(a+b+c)
11033.90
Add 1% labour cess 110.34
Rate per metre = (a+b+c+d) 11144.24
Add 12% GST 1337.31
Rate per m. 12481.55
say 12482.00
Labour Rate
Labour 2030.00
Overhead charges @ 5% 101.50
Contractors Profit @10% 213.15
2344.65
Add 1% labour cess 23.45
Cost for 1 m 2368.10
Rate per m 2368.10
Add 12% GST 284.17
Rate per m. 2652.27
2.19 A Cost from 10m upto 20m say 2652.00
(iii) Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
a 11th m 5% 11701.00
12th m 5% 12286.00
13th m 5% 12900.00
14th m 5% 13545.00
15th m 5% 14222.00
179
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
16th m 5% 14933.00
17th m 5% 15680.00
18th m 5% 16464.00
19th m 5% 17287.00
20th m 5% 18151.00
Total Cost from 10m upto 20m 147169.00
Avg Rate per metre 14717.00
Labour Rate
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
11th m 5% 2785.00
12th m 5% 2924.00
13th m 5% 3070.00
14th m 5% 3224.00
15th m 5% 3385.00
16th m 5% 3554.00
17th m 5% 3732.00
18th m 5% 3919.00
19th m 5% 4115.00
20th m 5% 4321.00
Total Cost from 10m upto 20m 35029.00
Avg Rate per metre 3503.00
180
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
30th m 7.5% 37408.00 44890.00
Total Cost from 20m upto 30m 276030.00 331236.00
Avg Rate per metre 27603.00 33124.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
181
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
39th m 10% 88207.00 105848.00
40th m 10% 97028.00 116434.00
Total Cost from 30m upto 40m 655810.00 786973.00
Avg Rate per metre 65581.00 78697.00
Labour Rate
Beyond 10 m upto 20 m
Add 5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
Add for dewatering @ 5 per cent of Including for
cost, if required. dewatering @
5% of cost, if
required
184
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
13th m 5% 4803.00 5043.00
14th m 5% 5043.00 5295.00
15th m 5% 5295.00 5560.00
16th m 5% 5560.00 5838.00
17th m 5% 5838.00 6130.00
18th m 5% 6130.00 6437.00
19th m 5% 6437.00 6759.00
20th m 5% 6759.00 7097.00
Total Cost from 10m upto 20m 54795.00 57536.00
Avg Rate per metre 5480.00 5754.00
Labour Rate
Beyond 20m upto 30 m
Add 7.5 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
185
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 25 per cent of cost for Including 25% Including 5% for
Kentledge including supports, for Kentledge dewatering, if
loading arrangement and Labour ). required
21st m 7.5% 7266.00 9083.00 9537.00
22nd m 7.5% 7811.00 9764.00 10252.00
23rd m 7.5% 8397.00 10496.00 11021.00
24th m 7.5% 9027.00 11284.00 11848.00
25th m 7.5% 9704.00 12130.00 12737.00
26th m 7.5% 10432.00 13040.00 13692.00
27th m 7.5% 11214.00 14018.00 14719.00
28th m 7.5% 12055.00 15069.00 15822.00
29th m 7.5% 12959.00 16199.00 17009.00
30th m 7.5% 13931.00 17414.00 18285.00
Total Cost from 30m upto 40m 102796.00 128497.00 134922.00
Avg Rate per metre 10280.00 12850.00 13492.00
Labour Rate
Beyond 30m upto 40 m
186
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 10 per cent for every additional
meter depth of sinking over the rate
of sinking for the previous meter
187
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Contractor's profit @ 10 % on 2385.28
(a+b+c)
26238.09
Add 1% labour cess 262.38
Rate per metre = (a+b+c+d) 26500.47
Add 12% GST 3180.06
Rate per m. 29680.53
say 29681.00
Labour Rate
Labour 7757.75
Overhead charges @ 10% 775.78
Contractors Profit @10% 853.35
9386.88
Add 1% labour cess 93.87
Cost for 1 m 9480.75
Rate per m 9480.75
Add 12% GST 1137.69
Rate per m. 10618.44
say 10618.00
2.19 Hard Rock (Twin D Type Well )
D Unit = Running Meter
Taking output = 1 m
Depth in hard rock strata upto 3 m
Rate of sinking @ 0.10 m/hour
a) Material
Geletine80 per cent Kg 10.00 98.00 980.00
Electric detonators each. 40.00 16.00 640.00
b) Labour
Mate day 1.34 350.00 469.00
Driller day 2.00 350.00 700.00
Blaster day 0.25 403.67 100.92
Mazdoor day 25.00 350.00 8750.00
Mazdoor (Skilled) day 4.25 350.00 1487.50
c) Machinery
Hire & running charges of crane hour 10.00 1096.00 10960.00
with grab bucket of 0.75 cum
capacity and accessories.
Hire & running charges of hour 3.00 488.00 1464.00
compressor with pneumatic
breaker/Jack hammer or drill
Dewatering @ 5 per cent of cost 1196.57
of (b+c), if required.
Consumables in sinking @ 10 1362.06
per cent of (b).
188
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Overhead charges @ 10 % on 2811.00
(a+b+c)
e) Contractor's profit @ 10 % on 3092.10
(a+b+c+d)
34013.15
Add 1% labour cess 340.13
Rate per metre = (a+b+c+d+e) 34353.29
Add 12% GST 4122.39
Rate per m. 38475.68
say 38476.00
Labour Rate
Labour 11507.42
Overhead charges @ 10% 1150.74
Contractors Profit @10% 1265.82
13923.97
Add 1% labour cess 139.24
Cost for 1 m 14063.21
Rate per m 14063.21
Add 12% GST 1687.59
Rate per m. 15750.80
say 15751.00
2.20 1200 Pneumatic sinking of wells with
equipment of approved design,
drawing and specifications worked
by competent and trained personnel
and comprising of compression and
decompression chambers, reducers,
two air locks separately for men and
plant & materials, arrangement for
supply of fresh air to working
chambers, check valves, exhaust
valves, shafts made from steel
plates of riveted construction not
less than 6 mm thick to withstand an
air pressure of 0.50 MPa, controlled
blasting of hard rock where required,
staircases and 1 m wide landing
plateforms with railing, arrangement
for compression and decompression,
electric lighting of 50 V maximum,
proper rooms for rest and medical
examinations and compliance with
safety precautions as per IS:4138,
all as per clause1207.6 of MoRTH
Specifications.
189
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Unit - 1 cum
Taking output = 5 cum
a) Material
M35 grade RCC corbel provided Cum 8.00 12484.00 99872.00
for supporting of equipment
(Dimensions as per ground
conditions). Rate may be
adopted vide Item 12.8 (H)
HYSD bar reinforcement in tonne 0.48 59875.00 28740.00
corbel
Blasting material
Gelatine 80 per cent Kg 1.50 98.00 147.00
Electric detonators each 6.00 16.00 96.00
b) Labour
Medical Officer day 0.50 0.00 0.00
Para medical personnel day 1.00 0.00 0.00
Mate day 1.86 350.00 651.00
Driller day 1.00 350.00 350.00
Blaster day 0.50 403.67 201.83
Mazdoor (for cutting, blasting, day 30.00 350.00 10500.00
cleaning, removal of Material
etc.)
Mazdoor (Skilled) (for fixation day 10.00 350.00 3500.00
and removal of adopter for air
lock, carrying out mechanical
and electrical operations and
repairs and other skilled jobs.)
Diver day 4.00 421.17 1684.67
c) Machinery
(i) Induction, deinduction and hour 6.00 11100.00 66600.00
erection of plant and equipment
including all components and
accessories for pneumatic
method of well sinking.
Induction and deinduction L.S 100000.00
Erection at site and L.S 150000.00
commissioning
Usage of plant and equipment hour 6.00 6290.00 37740.00
for pneumatic method of well
sinking
Air compressor 250 cfm, 2 nos. hour 2x6 488.00 5856.00
191
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
7.Depth of sinking shall be restricted
to 30 m.
Labour Rate
Labour 16887.50
Overhead charges @ 10% 1688.75
Contractors Profit @10% 1857.63
20433.88
Add 1% labour cess 204.34
Cost for 1 m 20638.21
Rate per m 20638.21
Add 12% GST 2476.59
Rate per m 23114.80
say 4623.00
2.21 1207 Sand Filling in Wells complete as per
Drawing and Technical
Specifications.
Unit = 1 cum
Taking output = 1 cum
a) Material
Sand (assuming 20 per cent cum 1.20 1167.00 1400.40
voids )
b) Labour
Mate day 0.01 350.00 3.50
Mazdoor day 0.30 350.00 105.00
c) Overhead charges @ 10 % on 150.89
(a+b)
d) Contractor's profit @ 10 % on 165.98
(a+b+c)
1825.77
Add 1% labour cess 18.26
Rate per cum (a+b+c+d) 1844.03
Add 12% GST 221.28
Rate per cum 2065.31
say 2065.00
Labour Rate
Labour 108.50
Overhead charges @ 5% 5.43
Contractors Profit @10% 11.39
125.32
Add 1% labour cess 1.25
Cost for 1 m 126.57
Rate per m 126.57
Add 12% GST 15.19
Rate per m 141.76
192
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 142.00
2.22 1200 & Providing Steel Liner 10 mm thick for
1900 Curbs and 6 mm thick for Steining of
Wells including Fabricating and
Setting out as per Detailed Drawing.
Unit = 1 MT
Taking output = 1 MT
a) Material
i) Structural steel including 5 per tonne 1.05 55110.00 57865.50
cent wastage
b) Labour
Mate day 1.24 350.00 434.00
Fitter day 6.00 403.67 2422.00
Blacksmith day 5.00 421.17 2105.83
Welder day 5.00 505.17 2525.83
Mazdoor day 10.00 350.00 3500.00
Electrodes, cutting gas and other 2893.28
consumables @ 5 per cent on
cost a (a) above.
c) Overhead charges @ 10 % on 7174.64
(a+b)
d) Contractor's profit @ 10 % on 7892.11
(a+b+c)
86813.19
Add 1% labour cess 868.13
Rate for per MT (a+b+c+d) 87681.33
Add 12% GST 10521.76
Rate per m 98203.09
say 98203.00
Labour Rate
Labour 10987.67
Overhead charges @ 10% 1098.77
Contractors Profit @10% 1208.64
13295.08
Add 1% labour cess 132.95
Cost for 1 m 13428.03
Rate per m 13428.03
Add 12% GST 1611.36
Rate per m 15039.39
say 15039.00
193
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.23 1100 & Bored cast-in-situ M35 grade R.C.C.
1700 Pile excluding Reinforcement
complete as per Drawing and
Technical Specifications and
removal of excavated earth with all
lifts and lead upto 1000 m.
Pile diameter-750 mm
Unit = meter
Taking output = 15 m
a) Materials
PCC Grade M35 cum 6.62 12343.00 81710.66
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
Concrete to be cast with a tremie
pipe 200mm dia.
b) Machinery( for boring and
construction )
Hire and running charges of hour 6.00 8327.00 49962.00
hydraulic piling rig with power
unit and complete accessories
including shifting from one bore
location to another.
Hire and running charges of light hour 0.50 680.00 340.00
crane for lowering reinforcement
cage
Hire and running charges of hour 6.00 Rate included
Bentonite pump in pilling rig
Loader I cum bucket capacity. hour 0.30 1321.00 396.30
Tipper 5.5 cum capacity for hour 0.30 570.00 171.00
disposal of muck from pile bore
hole
Bentonite kg 300.00 55.00 16500.00
c) Labour
Mate/Supervisor day 0.14 350.00 49.00
Mazdoor day 3.50 350.00 1225.00
d) Overhead charges @ 10 % on 6864.33
(b+c)
e) Contractor's profit @ 10 % on 7550.76
(b+c+d)
164769.05
Add 1% labour cess 1647.69
Cost for 15 m = a+b+c+d+d+e 166416.74
Rate per metre (a+b+c+d+e)/15 11094.45
Add 12% GST 1331.33
194
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m 12425.78
say 12426.00
Labour Rate
Labour 1493.35
Overhead charges @ 10% 149.34
Contractors Profit @10% 164.27
1806.95
Add 1% labour cess 18.07
Cost for 15 m 1825.02
Rate per m 121.67
Add 12% GST 14.60
Rate per m 136.27
say 136.00
2.24 Bored cast-in-situ M35 grade R.C.C.
1100,1600 Pile excluding Reinforcement
& 1700 complete as per Drawing and
Technical Specifications and
removal of excavated earth with all
lifts and lead upto 1000 m.
Pile diameter-1000 mm
Unit = meter
Taking output = 10 m
a) Materials
PCC Grade M35 cum 7.85 12343.00 96892.55
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
Concrete to be cast with a tremie
pipe 200mm dia.
b) Machinery( for boring and
construction )
Hire and running charges of hour 6.00 8327.00 49962.00
hydraulic piling rig with power
unit and complete accessories
including shifting from one bore
location to another.
Hire and running charges of light hour 0.50 680.00 340.00
crane for lowering reinforcement
cage
Hire and running charges of hour 6.00 Rate included
Bentonite pump in pilling rig
Loader I cum bucket capacity. hour 0.40 1321.00 528.40
Pile diameter-1200 mm
Unit = meter
Taking output = 9 m
a) Materials
PCC Grade M35 cum 10.17 12343.00 125528.31
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
Concrete to be cast with a tremie
pipe 200mm dia.
b) Machinery( for boring and
construction )
196
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Hire and running charges of hour 6.00 8327.00 49962.00
hydraulic piling rig with power
unit and complete accessories
including shifting from one bore
location to another.
Hire and running charges of light hour 0.50 680.00 340.00
crane for lowering reinforcement
cage
Hire and running charges of hour 6.00 Rate included
Bentonite pump in pilling rig
Loader I cum bucket capacity. hour 0.50 1321.00 660.50
Tipper 5.5 cum capacity for hour 0.50 570.00 285.00
disposal of muck from pile bore
hole
Bentonite kg 385.00 55.00 21175.00
c) Labour
Mate/Supervisor day 0.18 350.00 63.00
Mazdoor day 4.50 350.00 1575.00
d) Overhead charges @ 10 % on 7406.05
(b+c)
e) Contractor's profit @ 10 % on 8146.66
(b+c+d)
215141.52
Add 1% labour cess 2151.42
Cost for 9 m = a+b+c+d+d+e 217292.93
Rate per metre (a+b+c+d+e)/9 24143.66
Add 12% GST 2897.24
Rate per m 27040.90
say 27041.00
Labour Rate
Labour 1974.97
Overhead charges @ 10% 197.50
Contractors Profit @10% 217.25
2389.71
Add 1% labour cess 23.90
Cost for 9 m 2413.61
Rate per m 268.18
Add 12% GST 32.18
Rate per m 300.36
say 300.00
2.26 1100 & Driven cast-in-place vertical M35
1700 grade R.C.C. Pile excluding
Reinforcement complete as per
Drawing and & Technical
Specification
197
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Pile diameter - 750 mm
Unit = Running meter
Taking output = 40 metre
a) Materials
PCC Grade M35 cum 17.66 12343.00 217977.38
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
b) Materials Pile shoes
i) C.I. shoes for the pile Kg 160.00 85.00 13600.00
ii) M.S. clamps for shoe @ 35 Kg Kg 70.00 85.00 5950.00
per pile of 15 m
iii) Steel helmet and cushion Kg 50.00 114.00 5700.00
block on top of casing head
during driving
c) Machinery
Hire and running charges of hour 6.00 8327.00 49962.00
piling rig Including double acting
pile driving hammer complete
with power unit and
accessories..
Hiring and running charges for hour 0.50 680.00 340.00
light crane 5 tonnes lifting
capacity for lowering
reinforcement and handling steel
casing.
d) Labour
Mate/Supervisor day 0.12 350.00 42.00
Mazdoor day 3.00 350.00 1050.00
e) Overhead charges @ 10 % on 7664.40
(b+c+d)
f) Contractor's profit @ 10 % on 8430.84
(b+c+d+e)
310716.62
Add 1% labour cess 3107.17
Cost for 40 m = a+b+c+d+e 313823.79
Rate per metre (a+b+c+d+e)/40 7845.59
Add 12% GST 941.47
Rate per m 8787.07
say 8787.00
1.The quantity of concrete required
to be removed above the designed
top level of concrete, if any, will be
provided for in the rate analysis.
198
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Note 2.In case steel lining is included in
the design for driven cast-in-situ pile
and is planned to be retained, the
same may be included in the rate
analysis. In case the temporary steel
casing used during casting is
planned to be removed, an
additional cost @ 0.50 per cent of
cost of concrete may be provided to
cover its usage.
Labour Rate
Labour 1677.15
Overhead charges @ 10% 167.72
Contractors Profit @10% 184.49
2029.35
Add 1% labour cess 20.29
Cost for 140m 2049.65
Rate per m 51.24
Add 12% GST 6.15
Rate per m 57.39
say 57.00
2.27 1100 & Driven cast-in-place vertical M35
1700 grade R.C.C. Pile excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Pile diameter - 1000 mm
Unit = Running meter
Taking output = 30 metre
a) Materials
PCC Grade M35 cum 23.55 12343.00 290677.65
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
b) Materials Pile shoes
i) C.I. shoes for the pile Kg 160.00 85.00 13600.00
ii) M.S. clamps for shoe @ 35 Kg Kg 70.00 85.00 5950.00
per pile of 15 m
iii) Steel helmet and cushion Kg 50.00 114.00 5700.00
block on top of casing head
during driving
c) Machinery
199
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Hire and running charges of hour 6.00 8327.00 49962.00
piling rig Including double acting
pile driving hammer complete
with power unit and accessories.
200
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m 90.20
Add 12% GST 10.82
Rate per m 101.02
say 101.00
2.28 1100 & Driven cast-in-place vertical M35
1700 grade R.C.C. Pile excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Pile diameter - 1200 mm
Unit = Running meter
Taking output = 20 metre
a) Materials
PCC Grade M35 cum 22.61 12343.00 279075.23
Rate for concrete may be adopted
same as for bottom plug vide item
no. 12.11( C ) (IV)
b) Materials Pile shoes
i) C.I. shoes for the pile Kg 160.00 85.00 13600.00
ii) M.S. clamps for shoe @ 35 Kg Kg 70.00 85.00 5950.00
per pile of 15 m
201
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 2257.20
Rate per m 21067.19
say 21067.00
1.The quantity of concrete required
to be removed above the designed
top level of concrete, if any, will be
provided for in the rate analysis.
Note 2.In case steel lining is included in
the design for driven cast-in-situ pile
and is planned to be retained, the
same may be included in the rate
analysis. In case the temporary steel
casing used during casting is
planned to be removed, an
additional cost @ 0.50 per cent of
cost of concrete may be provided to
cover its usage.
Labour Rate
Labour 2387.15
Overhead charges @ 10% 238.72
Contractors Profit @10% 262.59
2888.45
Add 1% labour cess 28.88
Cost for 20 m 2917.34
Rate per m 97.24
Add 12% GST 11.67
Rate per m 108.91
say 109.00
2.29 1100 & Driven precast vertical M35 grade
1700 R.C.C. Piles excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Pile Diameter = 500 mm
Unit = Running Meter
Taking output = 60 m
a) Materials
RCC Grade M35 cum 11.78 12147.00 143091.66
Rate for concrete may be
adopted same as for bottom plug
vide item no. 12.11( F ) (IV)
202
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
c) Steel helmet and cushion Kg 30.00 114.00 3420.00
block on top of pile head during
driving.
c) Machinery
Crane20 t capacity hour 6.00 1100.00 6600.00
Vibrating Pile driving hammer hour 6.00 2500.00 15000.00
complete with power unit and
accessories.
d) Labour
Mate/Supervisor day 0.12 350.00 42.00
Mazdoor day 3.00 350.00 1050.00
Add 1 per cent of (a+b+c) for 2037.79
carriage of piles from casting
yard to work site and stacking,
and other imponderables during
installation.
203
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.30 1100 & Note Driven precast vertical M35 grade
1700 R.C.C. Piles excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Pile Diameter = 750 mm
Unit = Running Meter
Taking output = 50 m
a) Materials
RCC Grade M35 cum 22.08 12147.00 268205.76
Rate for concrete may be
adopted same as for bottom plug
vide item no. 12.11( F ) (IV)
204
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
The quantity of concrete required to
be removed above the designed top
level of concrete, if any, will be
provided for in the rate analysis.
Labour Rate
Labour 2186.30
Overhead charges @ 10% 218.63
Contractors Profit @10% 240.49
2645.42
Add 1% labour cess 26.45
Cost for 50 m 2671.88
Rate per m 53.44
Add 12% GST 6.41
Rate per m 59.85
say 60.00
2.31 1100 & Note Driven precast vertical M35 grade
1700 R.C.C. Piles excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Pile Diameter = 1000 mm
Unit = Running Meter
Taking output = 40 m
a) Materials
RCC Grade M35 cum 31.40 12147.00 381415.80
Rate for concrete may be
adopted same as for bottom plug
vide item no. 12.11( F ) (IV)
205
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1 per cent of (a+b+c) for 4377.86
carriage of piles from casting
yard to work site and stacking,
and other imponderables during
installation.
206
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b ) Material Pile shoes
a) C I shoes kg 240.00 85.00 20400.00
b) M. S shoes kg 105.00 135.00 14175.00
c) Steel helmet and cushion Kg 30.00 114.00 3420.00
block on top of pile head during
driving.
c) Machinery
Crane 10 tonne capacity hour 6.00 1096.00 6576.00
Vibrating Pile driving hammer hour 6.00 2500.00 15000.00
complete with power unit and
accessories.
d ) Labour
Mate/Supervisor day 0.12 350.00 42.00
Mazdoor day 3.00 350.00 1050.00
Add 1 per cent of (a+b+c) for 1262.57
carriage of piles from casting
yard to work site and stacking,
and other imponderables during
installation.
207
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m 48.61
say 49.00
2.33 1100 Note Driven precast vertical M35 grade
&1700 R.C.C. Piles excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Size of pile - 500 mm x 500 mm
Unit = Running Meter
Taking output = 50 m
a) Materials
RCC Grade M-35
Rate for concrete may be cum 12.50 12147.00 151837.50
adopted same as for bottom plug
vide item no. 12.11( F ) (IV)
208
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m 4846.07
say 4846.00
The quantity of concrete required to
be removed above the designed top
level of concrete, if any, will be
provided for in the rate analysis.
Labour Rate
Labour 2494.56
Overhead charges @ 5% 124.73
Contractors Profit @10% 261.93
2881.22
Add 1% labour cess 28.81
Cost for 50 m 2910.03
Rate per m 58.20
Add 12% GST 6.98
Rate per m 65.18
say 65.00
2.34 1100 Note Driven precast vertical M35 grade
&1700 R.C.C. Piles excluding
Reinforcement complete as per
Drawing and & Technical
Specification
Size of pile - 750 mm x 750 mm
Unit = Running Meter
Taking output = 40 m
a) Materials
RCC Grade M-35
Rate for concrete may be cum 22.50 12147.00 273307.50
adopted same as for bottom plug
vide item no. 13.11( F ) (IV)
b ) Material
Pile shoes
a) C I shoes kg 160.00 85.00 13600.00
b) M. S shoes kg 70.00 135.00 9450.00
c) Steel helmet and cushion Kg 30.00 114.00 3420.00
block on top of pile head during
driving.
c) Machinery
Crane 20 tonne capacity hour 6.00 1100.00 6600.00
Vibrating Pile driving hammer hour 6.00 2500.00 15000.00
complete with power unit and
accessories.
d ) Labour
Mate/Supervisor day 0.18 350.00 63.00
Mazdoor day 4.50 350.00 1575.00
209
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1 per cent of (a+b+c) for 3230.16
carriage of piles from casting
yard to work site and stacking,
and other imponderables during
installation.
210
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Crane 10 T capacity hour 6.00 1096.00 6576.00
Vibrating Pile driving hammer hour 6.00 2500.00 15000.00
complete with power unit and
other accessories.
c) Labour
Mate/Supervisor day 0.12 350.00 42.00
Mazdoor day 3.00 350.00 1050.00
Add 0.5 per cent of (a+b+c) 1777.66
for providing steel helmet on top
of pile head during driving,
stacking of piles at site, providing
anti-corrosion treatment and
other imponderables during
installation.
211
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a) Materials
Structural steel including 5 per tonnes 5.83 55110.00 321291.30
cent wastage @92.50 kg/m
b) Machinery
Crane 10 T capacity hour 6.00 1096.00 6576.00
Vibrating Pile driving hammer hour 6.00 2500.00 15000.00
complete with power unit and
accessories.
c) Labour
Mate/Supervisor day 0.14 350.00 49.00
Mazdoor day 3.50 350.00 1225.00
Add 0.5 per cent of (a+b+c) 1720.71
for providing steel helmet and
cushion block on top of pile head
during driving, stacking of piles
at site, providing anti-corrosive
treatment and other
imponderables during
installation.
d) Overhead charges @ 10 % on 34586.20
(a+b+c)
e) Contractor's profit @ 10 % on 38044.82
(a+b+c+d)
418493.03
Add 1% labour cess 4184.93
Cost for 60 m = a+b+c+d+e 422677.96
Rate per metre (a+b+c+d+e)/60 7044.63
Add 12% GST 845.36
Rate per m 7889.99
say 7890.00
Labour Rate
Labour 2994.71
Overhead charges @10% 299.47
Contractors Profit @10% 329.42
3623.59
Add 1% labour cess 36.24
Cost for 60 m 3659.83
Rate per m 61.00
Add 12% GST 7.32
Rate per m 68.32
say 68.00
2.37 1100 Pile Load Test on single Vertical Pile
in accordance with IS:2911(Part-IV)
Unit = 1 MT
212
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Taking output = 1 MT
a) Initial and routine load test tonne 1.00 500.00 300.00
b) Lateral load test tonne 1.00 7200.00 5000.00
Although, this item is incidental to
work and is not required to be
included in BOQ of contract, the
same is required to be added in the
estimate to assess cost of work.
2.38 1100, Note Cement Concrete for Reinforced
1500 Concrete in Pile Cap complete as
&1700 per Drawing and Technical
Specification
RCC Grade M20
A Unit = cum
Taking output = 15 cum
Using Concrete Mixer
(i) a) Material
Cement tonne 5.12 6875.00 35200.00
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 421.17 631.75
Mazdoor for concreting day 20.00 350.00 7000.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator (capacity 33 KVA) hour 6.00 630.00 3780.00
Formwork @ 4 per cent on cost 2988.11
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 7769.09
(a+b+c)
e) Contractor's profit @ 10 % on 8545.99
(a+b+c+d)
94005.94
Add 1% labour cess 940.06
Cost for 15 cum = a+b+c+d+e 94946.00
Rate per metre (a+b+c+d+e)/15 6329.73
Add 12% GST 759.57
213
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m 7089.30
say 7089.00
Labour Rate
Labour 8296.75
Overhead charges @ 10% 829.68
Contractors Profit @10% 912.64
10039.07
Add 1% labour cess 100.39
Cost for 15cum 10139.46
Rate per 1cum 675.96
Add 12% GST 81.12
Rate per cum 757.08
say 757.00
2.38A Using Batching Plant, Transit Mixer
and Concrete Pump
(ii) a) Material
Cement tonne 5.12 6875.00 35200.00
Coarse sand cum 6.75 1214.00 8194.50
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.16 350.00 56.00
Mason day 0.38 421.17 160.04
Mazdoor for concreting day 2.50 350.00 875.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Batching Plant @ 20 cum/hour hour 0.75 14488.00 10866.00
Generator 100 KVA hour 0.75 1160.00 870.00
Loader (capacity 1 cum) hour 0.75 1321.00 990.75
Transit Mixer ( capacity 4.0 cu.m )
Lead upto 1 Km hour 2.00 1601.00 3202.00
Lead beyond 1 Km, L - lead in tonne.k 37.5L 1601.00 60037.50
Kilometer m
Concrete Pump hour 0.75 240.00 180.00
Formwork @ 4 per cent on cost 5540.19
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 14404.50
(a+b+c)
e) Contractor's profit @ 10 % on 15844.95
(a+b+c+d)
214
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
174294.43
Add 1% labour cess 1742.94
Cost for 15 cum = a+b+c+d+e 176037.38
Rate per metre (a+b+c+d+e)/15 11735.83
Add 12% GST 1408.30
Rate per m 13144.12
say 13144.00
The value of a, b and c may be
taken as applicable i.e. either using
concrete mixer or batching plant.
Labour Rate
Labour 1441.04
Overhead charges @ 10% 144.10
Contractors Profit @10% 158.51
1743.66
Add 1% labour cess 17.44
Cost for 15cum 1761.10
Rate per 1cum 117.41
Add 12% GST 14.09
Rate per cum 131.50
say 131.00
2.38 Note RCC Grade M25
B Unit = cum
Taking output = 15 cum
Using Concrete Mixer
(i) a) Material
Cement tonne 5.99 6875.00 41181.25
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 421.17 631.75
Mazdoor for concreting day 20.00 350.00 7000.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator (capacity 33 KVA) hour 6.00 630.00 3780.00
215
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Formwork @ 4 per cent on cost 3227.36
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 8391.14
(a+b+c)
e) Contractor's profit @ 10 % on 9230.25
(a+b+c+d)
101532.75
Add 1% labour cess 1015.33
Cost for 15 cum = a+b+c+d+e 102548.07
Rate per metre (a+b+c+d+e)/15 6836.54
Add 12% GST 820.38
Rate per m 7656.92
say 7657.00
Labour Rate
Labour 8296.75
Overhead charges @ 10% 829.68
Contractors Profit @10% 912.64
10039.07
Add 1% labour cess 100.39
Cost for 15cum 10139.46
Rate per 1cum 675.96
Add 12% GST 81.12
Rate per cum 757.08
say 757.00
2.38B Using Batching Plant, Transit Mixer
and Concrete Pump
(ii) a) Material
Cement tonne 5.99 6875.00 41181.25
Coarse sand cum 6.75 1214.00 8194.50
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.16 350.00 56.00
Mason day 0.38 421.17 160.04
Mazdoor for concreting day 2.50 350.00 875.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Batching Plant @ 20 cum/hour hour 0.75 14488.00 10866.00
217
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 421.17 631.75
Mazdoor for concreting day 20.00 350.00 7000.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator (capacity 33 KVA) hour 6.00 630.00 3780.00
Formwork @ 4 per cent on cost 3257.61
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 8469.79
(a+b+c)
e) Contractor's profit @ 10 % on 9316.76
(a+b+c+d)
102484.41
Add 1% labour cess 1024.84
Cost for 15 cum = a+b+c+d+e 103509.25
Rate per c metre (a+b+c+d+e)/15 6900.62
218
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Labour
Mate day 0.16 350.00 56.00
Mason day 0.38 421.17 160.04
Mazdoor for concreting day 2.50 350.00 875.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Batching Plant @ 20 cum/hour hour 0.75 14488.00 10866.00
Generator 100 KVA hour 0.75 1160.00 870.00
Loader (capacity 1 cum) hour 0.75 1321.00 990.75
Transit Mixer ( capacity 4.0 cu.m )
Lead upto 1 Km hour 2.00 1601.00 3202.00
Lead beyond 1 Km, L - lead in tonne.k 37.5L 1601.00 60037.50
Kilometer m
Concrete Pump hour 0.75 240.00 180.00
Formwork @ 4 per cent on cost 5809.69
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 15105.20
(a+b+c)
e) Contractor's profit @ 10 % on 16615.72
(a+b+c+d)
182772.90
Add 1% labour cess 1827.73
Cost for 15 cum = a+b+c+d+e 184600.63
Rate per metre (a+b+c+d+e)/15 12306.71
Add 12% GST 1476.81
Rate per cum 13783.51
say 13784.00
The value of a, b and c may be
taken as applicable i.e. either using
concrete mixer or batching plant.
Labour Rate
Labour 1441.04
Overhead charges @ 10% 144.10
Contractors Profit @10% 158.51
1743.66
Add 1% labour cess 17.44
Cost for 15cum 1761.10
Rate per 1cum 117.41
Add 12% GST 14.09
Rate per cum 131.50
219
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 131.00
2.38 Note RCC Grade M35
D Unit = cum
Taking output = 15 cum
Using Concrete Mixer
(i) a) Material
Cement tonne 6.33 6875.00 43518.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 421.17 631.75
Mazdoor day 20.00 350.00 7000.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator (capacity 33 KVA) hour 6.00 630.00 3780.00
Formwork @ 4 per cent on cost 3320.86
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 8634.24
(a+b+c)
e) Contractor's profit @ 10 % on 9497.66
(a+b+c+d)
104474.26
Add 1% labour cess 1044.74
Cost for 15 cum = a+b+c+d+e 105519.00
Rate per metre (a+b+c+d+e)/15 7034.60
Add 12% GST 844.15
Rate per cum 7878.75
say 7879.00
Labour Rate
Labour 8296.75
Overhead charges @ 10% 829.68
Contractors Profit @10% 912.64
10039.07
Add 1% labour cess 100.39
Cost for 15cum 10139.46
Rate per 1cum 675.96
220
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 81.12
Rate per cum 757.08
say 757.00
'2.38D Using Batching Plant, Transit Mixer
and Concrete Pump
(ii) a) Material
Cement tonne 6.33 6875.00 43518.75
Coarse sand cum 6.75 1214.00 8194.50
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.16 350.00 56.00
Mason day 0.38 421.17 160.04
Mazdoor for concreting day 2.50 350.00 875.00
Mazdoor for breaking pile head, day 1.00 350.00 350.00
bending bars, cleaning etc.
c) Machinery
Batching Plant @ 20 cum/hour hour 0.75 14488.00 10866.00
Generator 125 KVA hour 0.75 1160.00 870.00
Loader (capacity 1 cum) hour 0.75 1321.00 990.75
Transit Mixer ( capacity 4.0 cu.m )
Lead upto 1 Km hour 2.00 1601.00 3202.00
Lead beyond 1 Km, L - lead in tonne.k 37.5L 1601.00 60037.50
Kilometer m
Concrete Pump hour 0.75 240.00 180.00
Formwork @ 4 per cent on cost 5872.94
of concrete i.e. cost of a)
Material, b) Labour and c)
Machinery
d) Overhead charges @ 10 % on 15269.65
(a+b+c)
e) Contractor's profit @ 10 % on 16796.61
(a+b+c+d)
184762.75
Add 1% labour cess 1847.63
Cost for 15 cum = a+b+c+d+e 186610.37
Rate per metre (a+b+c+d+e)/15 12440.69
Add 12% GST 1492.88
Rate per cum 13933.57
say 13934.00
Labour Rate
Labour 1441.04
Overhead charges @ 10% 144.10
221
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Contractors Profit @10% 158.51
1743.66
Add 1% labour cess 17.44
Cost for 15cum 1761.10
Rate per 1cum 117.41
Add 12% GST 14.09
Rate per cum 131.50
say 131.00
2.39 1100&170 Levelling Course for Pile cap
0
Providing and laying of PCC M15
levelling course 100mm thick below
the pile cap.
Unit = cum
Taking output = 15 cum
a) Material
Cement tonne 4.13 6875.00 28393.75
Coarse sand cum 6.75 1156.00 7803.00
40 mm aggregate cum 8.10 954.00 7727.40
20 mm Aggregate cum 4.05 1298.00 5256.90
10 mm Aggregate cum 1.35 1298.00 1752.30
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 421.17 631.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 hour 6.00 350.00 2100.00
cum)
Generator 33 KVA hour 6.00 630.00 3780.00
d) Overhead charges @ 10 % on 6474.61
(a+b+c)
e) Contractor's profit @ 10 % on 7122.07
(a+b+c+d)
78342.78
Add 1% labour cess 783.43
Cost for 15 cum = a+b+c+d+e 79126.21
Rate per metre (a+b+c+d+e)/15 5275.08
Add 12% GST 633.01
Rate per cum 5908.09
say 5908.00
Labour Rate
Labour 7932.75
Overhead charges @ 10% 793.28
Contractors Profit @10% 872.60
222
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
9598.63
Add 1% labour cess 95.99
Cost for 15cum 9694.61
Rate per 1cum 646.31
Add 12% GST 77.56
Rate per cum 723.87
say 724.00
2.40 1600 Supplying, Fitting and Placing un-
coated HYSD bar Reinforcement in
Foundation complete as per Drawing
and Technical Specifications.
Unit = 1 MT
Taking output = 1 MT
a) Material
HYSD bars including5 per cent tonne 1.05 59875.00 62868.75
overlaps and wastage
Binding wire Kg 6.00 80.00 480.00
b) Labour for cutting, bending,
shifting to site, tying and placing in
position
Mate day 0.40 350.00 140.00
Blacksmith day 2.00 505.17 1010.33
Mazdoor day 6.00 350.00 2100.00
c) Overhead charges @ 10 % on 6659.91
(a+b)
d) Contractor's profit @ 10 % on 7325.90
(a+b+c)
80584.89
Add 1% labour cess 805.85
Rate for per MT (a+b+c+d) 81390.74
Add 12% GST 9766.89
Rate per MT 91157.63
say 91158.00
Labour Rate
Labour 3250.33
Overhead charges @ 10% 325.03
Contractors Profit @10% 357.54
3932.90
Add 1% labour cess 39.33
Cost for 1MT 3972.23
Rate per MT 3972.23
Add 12% GST 476.67
Rate per MT 4448.90
say 4449.00
223
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.41 1600 Supplying, fitting and placing un-
coated Mild steel reinforcement
complete in foundation as per
drawing and technical specification
Unit = 1 MT
Taking output = 1 MT
a) Material
MS bars including 5 per cent tonne 1.05 58000.00 60900.00
overlaps and wastage
Binding wire Kg 6.00 80.00 480.00
b) Labour for straightening,
cutting, bending, shifting to site,
tying and placing in position
Mate day 0.43 350.00 150.50
Blacksmith day 2.25 505.17 1136.63
Mazdoor day 6.50 350.00 2275.00
c) Overhead charges @ 10 % on 6494.21
(a+b)
d) Contractor's profit @ 10 % on 7143.63
(a+b+c)
78579.97
Add 1% labour cess 785.80
Rate for per MT (a+b+c+d) 79365.77
Add 12% GST 9523.89
Rate per MT 88889.66
say 88890.00
Labour Rate
Labour 3562.13
Overhead charges @ 10% 356.21
Contractors Profit @10% 391.83
4310.17
Add 1% labour cess 43.10
Cost for 1MT 4353.27
Rate per MT 4353.27
Add 12% GST 522.39
Rate per MT 4875.66
say 4876.00
224
Chapter-3:
S ubstructure
P ream ble:
1. A lthough,S ubstructure are generally constructed in cem ent concrete,the rate analysisfor
brickand stone m asonry in CM 1:3 have also been included w hichcan be adopted ifperm itted
by design.
2. T he cost ofform w orkw illvery w ith the height ofthe substructure.P rovision hasaccordingly
been m ade.
3. A sthe highergrade of concrete iscostlier,the provision m ade forform w ork on percentage
basishasbeen suitably adjusted to m ake it com parable w ith othergrades.
4. Bridge bearings , being com m ercial item s produced by specialized firm s w ith im ported
technology and parts ,the ratesforthe sam e are required to be ascertained from the m arket
forthe approved design and technicalspecifications.
5. Filterm ediaand backfilling behind abutm entsare required to be provided asperguidelines
given in IR C: 78-2000.
6. W eep holesshallbe provided asperClause 2706 ofM oR T &H S pecification.
7. Icase ofroller-cum rockerbearings ,only fullcircularrollersare to be provided.
8. A llbearingsshallbe set truly levelso asto have fulland even seating.
9. Forclastom eric bearingspads ,the concrete surface s hallbe leveled such that the variation is
not m ore than 1.5 m m from astraight edge placed in any direction acrossthe area.
10. T he bearing should be procured only from those m anufacturersw ho have been pre-qualified
by the M inistry ofR oad T ransport and Highw ays.
11. T he bottom sofgirdersresting on the bearing shallbe plane and truly horizontal.
12. Forspansin grade,the bearing shallbe placed horizontalby using sole platesforsuitably
designed R CC pedestals.
225
CHAPTER-3
SUB-STRUCTURE
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
3.1 1300 & Brick masonry work in 1:3 in sub-structure
2200 complete excluding pointing and plastering,
as per drawing and Technical Specifications
Unit = cum
Taking output = 1 cum
a) Material
Bricks Ist class each 500.00 7.00 3500.00
Cement mortar 1:3 (Rate as in Item 12.6 A sub- cum 0.24 5049.00 1211.76
analysis)
b) Labour
Mate day 0.06 350.00 21.00
Mason day 0.80 505.17 404.13
Mazdoor day 0.80 350.00 280.00
Add for scaffolding @ 5 per cent of cost of 270.84
material and labour
c) Overhead charges @ 10 % on (a+b) 568.77
d) Contractor's profit @ 10 % on (a+b+c) 625.65
1313.87
Add 1% labour cess 13.14
Cost for 1 cum 1327.01
Rate per cum 1327.01
Add 12% GST 159.24
Rate per cum 1486.25
say 1486.00
3.2 1300 & Pointing with cement mortar (1:3 ) on brick
2200 work in substructure as per Technical
Specifications
Unit = 10 sqm
Taking output = 10 sqm
a) Material
Cement mortar 1:3 (Rate as in Item 12.6 ) cum 0.03 5049.00 151.47
b) Labour
Mate day 0.04 350.00 14.00
Mason day 0.50 505.17 252.58
Mazdoor day 0.50 350.00 175.00
226
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
c) Overhead charges @ 10 % on (a+b) 59.31
d) Contractor's profit @ 10 % on (a+b+c) 65.24
717.59
Add 1% labour cess 7.18
Rate per 10 sqm (a+b+c+d) 724.77
Add 12% GST 86.97
Rate per 10 sqm 811.74
Rate per 1sqm 81.17
say 81.00
Note Scaffolding is already included in item 13.1
227
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Note 1.Scaffolding is already included in item
no. 13.1
2.The number of masons and Mazdoors
already catered in the cement mortar
have been taken into account while
providing these categories in brick
masonry, pointing and plastering.
4576.81
Add 1% labour cess 45.77
Rate per cum (a+b+c+d) 4622.58
Add 12% GST 554.71
Rate per cum 5177.29
say 5177.00
Labour Rate
Labour 1061.20
228
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add for scaffolding @ 5 per cent of cost labour 53.06
c) Overhead charges @ 10 % on (a+b) 111.43
d) Contractor's profit @ 10 % on (a+b+c) 122.57
1348.25
Add 1% labour cess 13.48
Cost for 1 cum 1361.74
Rate per cum 1361.74
Add 12% GST 163.41
Rate per cum 1525.15
say 1525.00
3.4 B Coursed rubble masonry (first sort )
Unit = cum
Taking output = 1 cum
a) Material
Stone cum 1.10 700.00 770.00
Through and bond stone each 7.00 25.00 175.00
(7no.x0.24mx0.24mx0.39m = 0.16 cu.m)
Cement mortar 1:3 (Rate as in Item 12.6) cum 0.30 5049.00 1514.70
b) Labour
Mate day 0.12 350.00 42.00
Mason day 1.50 505.17 757.75
Mazdoor day 1.50 350.00 525.00
Add for scaffolding @ 5 per cent of cost of 189.22
material and labour
c) Overhead charges @ 10 % on (a+b) 397.37
d) Contractor's profit @ 10 % on (a+b+c) 437.10
1548.69
Add 1% labour cess 15.49
Rate per cum (a+b+c+d) 4808.14
Add 12% GST 576.98
Rate per cum 5385.12
say 5385.00
229
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mason day 2.50 505.17 1262.92
Mazdoor day 2.50 350.00 875.00
Add for scaffolding @ 5 per cent of cost of a) 278.38
Material and b) Labour
c) Overhead charges @ 10 % on (a+b) 584.59
d) Contractor's profit @ 10 % on (a+b+c) 643.05
7073.59
Add 1% labour cess 70.74
Rate per cum (a+b+c+d) 7144.33
Add 12% GST 857.32
Rate per cum 8001.65
say 8002.00
Note The labour already considered in the cement
mortar have been taken into account while
providing these categories in the stone masonry
works.
230
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
3328.11
Add 1% labour cess 33.28
Cost for 15cum 3361.39
Rate per cum 224.09
Add 12% GST 26.89
Rate per cum 250.98
say 251.00
231
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum 7811.37
say 7811.00
232
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Per Cum Basic Cost of Labour, Material & 9469.00
Machinery (a+b+c) of Item 12.8 (D) Case II
d) formwork
Add 12 per cent of cost of material, labour and 12.00 1136.28
machinery (a+b+c) for Formwork
Add 2 per cent of cost of material, Labour and 2.00 189.38
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1079.47
(a+b+c+d)
f) Contractor's profit @ 10 % on 1187.41
(a+b+c+d+e)
13061.54
Add 1% labour cess 130.62
Rate per cum (a+b+c+d+e+f) 13192.15
Add 12% GST 1583.06
Rate per cum 14775.21
say 14775.00
3.5 C (r) Height above 10m
Same as Item 12.8 (D) with the following
changes: (i) Add 4 per cent of cost of material,
labour and machinery excluding form work to
cater for extra lift. (ii) The provision of form work
shall be 15 per cent instead of 3.75 per cent of
cost of material, labour and machinery.
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5240.00
Machinery (a+b+c) of Item 12.8 (D) Case I
d) formwork
Add 15 per cent of cost of material, labour and 15.00 786.00
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 209.60
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 623.56
(a+b+c+d)
f) Contractor's profit @ 10 % on 685.92
(a+b+c+d+e)
7545.08
Add 1% labour cess 75.45
Rate per cum (a+b+c+d+e+f) 7620.53
Add 12% GST 914.46
Rate per cum 8534.99
say 8535.00
233
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 15 per cent of cost of material, labour and 15.00 1420.35
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 378.76
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1126.81
(a+b+c+d)
f) Contractor's profit @ 10 % on 1239.49
(a+b+c+d+e)
13634.41
Add 1% labour cess 136.34
Rate per cum (a+b+c+d+e+f) 13770.76
Add 12% GST 1652.49
Rate per cum 15423.25
say 15423.00
3.5 D PCC Grade M30
(p) Height upto 5m
Same as Item 12.8 (F) upto 5 m height with the
only change that the provision of form work shall
be 10 per cent instead of 3.50 per cent of cost
of material, labour and machinery.
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5281.00
Machinery (a+b+c) of Item 12.8 (F) Case I
d) formwork
Add 10 per cent of cost of material, labour and 10.00 528.10
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 580.91
(a+b+c+d)
f) Contractor's profit @ 10 % on 639.00
(a+b+c+d+e)
7029.01
Add 1% labour cess 70.29
Rate per cum (a+b+c+d+e+f) 7099.30
Add 12% GST 851.92
Rate per cum 7951.22
say 7951.00
234
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum (a+b+c+d+e+f) 12779.01
Add 12% GST 1533.48
Rate per cum 14312.49
say 14312.00
235
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum 14832.95
say 14833.00
236
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
237
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12 per cent of cost of material, labour and 12.00 600.72
machinery (a+b+c) for Formwork
Add 2 per cent of cost of material, Labour and 2.00 100.12
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 570.68
(a+b+c+d)
f) Contractor's profit @ 10 % on 627.75
(a+b+c+d+e)
6905.28
Add 1% labour cess 69.05
Rate per cum (a+b+c+d+e+f) 6974.33
Add 12% GST 836.92
Rate per cum 7811.25
say 7811.00
3.5 E (q) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9232.00
Machinery (a+b+c) of Item 12.8 (C) Case II
d) formwork
Add 12 per cent of cost of material, labour and 12.00 1107.84
machinery (a+b+c) for Formwork
Add 2 per cent of cost of material, Labour and 2.00 184.64
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1052.45
(a+b+c+d)
f) Contractor's profit @ 10 % on 1157.69
(a+b+c+d+e)
12734.62
Add 1% labour cess 127.35
Rate per cum (a+b+c+d+e+f) 12861.97
Add 12% GST 1543.44
Rate per cum 14405.40
say 14405.00
3.5 E (r) Height above 10m
Same as Item 12.8 (C) with the following
changes: (i) Add 4 per cent of cost of material,
labour and machinery excluding form work to
cater for extra lift. (ii) The provision of form work
shall be 15 per cent instead of 4 per cent of
cost of material, labour and machinery.
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5006.00
Machinery (a+b+c) of Item 12.8 (C) Case I
d) formwork
Add 15 per cent of cost of material, labour and 15.00 750.90
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 200.24
machinery excluding formwork to cater for extra
lift
238
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 595.71
(a+b+c+d)
f) Contractor's profit @ 10 % on 655.29
(a+b+c+d+e)
7208.14
Add 1% labour cess 72.08
Rate per cum (a+b+c+d+e+f) 7280.22
Add 12% GST 873.63
Rate per cum 8153.85
say 8154.00
3.5 E (r) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9232.00
Machinery (a+b+c) of Item 12.8 (C) Case II
d) formwork
Add 15 per cent of cost of material, labour and 15.00 1384.80
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 369.28
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1098.61
(a+b+c+d)
f) Contractor's profit @ 10 % on 1208.47
(a+b+c+d+e)
13293.16
Add 1% labour cess 132.93
Rate per cum (a+b+c+d+e+f) 13426.09
Add 12% GST 1611.13
Rate per cum 15037.22
say 15037.00
3.5 F RCC Grade M25
(p) Height upto 5m
Same as Item 12.8 (E) upto 5m height,
excluding formwork. For cost of formwork, add
10 per cent of cost of material, labour and
machinery instead of 3.75 per cent .
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5391.00
Machinery (a+b+c) of Item 12.8 (E) Case I
d) formwork
Add 10 per cent of cost of material, labour and 10.00 539.10
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 593.01
(a+b+c+d)
f) Contractor's profit @ 10 % on 652.31
(a+b+c+d+e)
7175.42
Add 1% labour cess 71.75
Rate per cum (a+b+c+d+e+f) 7247.18
Add 12% GST 869.66
Rate per cum 8116.84
239
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 8117.00
3.5 F (p) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9875.00
Machinery (a+b+c) of Item 12.8 (E) Case II
d) formwork
Add 10 per cent of cost of material, labour and 10.00 987.50
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 1086.25
(a+b+c+d)
f) Contractor's profit @ 10 % on 1194.88
(a+b+c+d+e)
13143.63
Add 1% labour cess 131.44
Rate per cum (a+b+c+d+e+f) 13275.06
Add 12% GST 1593.01
Rate per cum 14868.07
say 14868.00
3.5 F (q) Height 5m to 10m
For height, upto 10m, add 1.8 per cent of cost
as above excluding formwork. For cost of
formwork add 11.8 per cent of cost of material,
labour and machinery
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5391.00
Machinery (a+b+c) of Item 12.8 (E) Case I
d) formwork
Add 11.8 per cent of cost of material, labour 11.80 636.14
and machinery (a+b+c) for Formwork
Add 1.8 per cent of cost of material, Labour 1.80 97.04
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 612.42
(a+b+c+d)
f) Contractor's profit @ 10 % on 673.66
(a+b+c+d+e)
7410.25
Add 1% labour cess 74.10
Rate per cum (a+b+c+d+e+f) 7484.36
Add 12% GST 898.12
Rate per cum 8382.48
say 8382.00
3.5 F (q) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9875.00
Machinery (a+b+c) of Item 12.8 (E) Case II
d) formwork
Add 11.8 per cent of cost of material, labour 11.80 1165.25
and machinery (a+b+c) for Formwork
240
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1.8 per cent of cost of material, Labour 1.80 177.75
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 1121.80
(a+b+c+d)
f) Contractor's profit @ 10 % on 1233.98
(a+b+c+d+e)
13573.78
Add 1% labour cess 135.74
Rate per cum (a+b+c+d+e+f) 13709.52
Add 12% GST 1645.14
Rate per cum 15354.66
say 15355.00
3.5 F (r) Height above 10m
For height, above 10m, add 4 per cent of cost
as above excluding formwork. For cost of
formwork add 15 per cent of cost of material,
labour and machinery
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5391.00
Machinery (a+b+c) of Item 12.8 (E) Case I
d) formwork
Add 15 per cent of cost of material, labour and 15.00 808.65
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 215.64
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 641.53
(a+b+c+d)
f) Contractor's profit @ 10 % on 705.68
(a+b+c+d+e)
7762.50
Add 1% labour cess 77.63
Rate per cum (a+b+c+d+e+f) 7840.13
Add 12% GST 940.82
Rate per cum 8780.94
say 8781.00
3.5 F (r) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9875.00
Machinery (a+b+c) of Item 12.8 (E) Case II
d) formwork
Add 15 per cent of cost of material, labour and 15.00 1481.25
machinery (a+b+c) for Formwork
Add 4 per cent of cost of material, Labour and 4.00 395.00
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1175.13
(a+b+c+d)
f) Contractor's profit @ 10 % on 1292.64
(a+b+c+d+e)
241
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
14219.01
Add 1% labour cess 142.19
Rate per cum (a+b+c+d+e+f) 14361.20
Add 12% GST 1723.34
Rate per cum 16084.55
say 16085.00
3.5 G RCC Grade M30
(p) Height upto 5m
Same as Item 12.8 (G) upto 5m height,
excluding formwork. For cost of formwork, add
10 per cent of cost of material, labour and
machinery instead of 3.5 per cent .
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5414.00
Machinery (a+b+c) of Item 12.8 (G) Case I
d) formwork
Add 10 per cent of cost of material, labour and 10.00 541.40
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 595.54
(a+b+c+d)
f) Contractor's profit @ 10 % on 655.09
(a+b+c+d+e)
7206.03
Add 1% labour cess 72.06
Rate perm (a+b+c+d+e+f) 7278.09
Add 12% GST 873.37
Rate per cum 8151.47
say 8151.00
3.5 G (p) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9641.00
Machinery (a+b+c) of Item 12.8 (G) Case II
d) formwork
Add 10 per cent of cost of material, labour and 10.00 964.10
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 1060.51
(a+b+c+d)
f) Contractor's profit @ 10 % on 1166.56
(a+b+c+d+e)
12832.17
Add 1% labour cess 128.32
Rate perm (a+b+c+d+e+f) 12960.49
Add 12% GST 1555.26
Rate per cum 14515.75
say 14516.00
3.5 G (q) Height 5m to 10m
For height, upto 10m, add 1.6 per cent of cost
as above excluding formwork. For cost of
formwork add 11.5 per cent of cost of material,
labour and machinery
242
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5414.00
Machinery (a+b+c) of Item 12.8 (G) Case I
d) formwork
Add 11.5 per cent of cost of material, labour 11.50 622.61
and machinery (a+b+c) for Formwork
Add 1.6 per cent of cost of material, Labour 1.60 86.62
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 612.32
(a+b+c+d)
f) Contractor's profit @ 10 % on 673.56
(a+b+c+d+e)
7409.11
Add 1% labour cess 74.09
Rate perm (a+b+c+d+e+f) 7483.20
Add 12% GST 897.98
Rate per cum 8381.19
say 8381.00
3.5 G (q) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9641.00
Machinery (a+b+c) of Item 12.8 (G) Case II
d) formwork
Add 11.5 per cent of cost of material, labour 11.50 1108.72
and machinery (a+b+c) for Formwork
Add 1.6 per cent of cost of material, Labour 1.60 154.26
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 1090.40
(a+b+c+d)
f) Contractor's profit @ 10 % on 1199.44
(a+b+c+d+e)
13193.80
Add 1% labour cess 131.94
Rate perm (a+b+c+d+e+f) 13325.74
Add 12% GST 1599.09
Rate per cum 14924.83
say 14925.00
3.5 G (r) Height above 10m
For height, above 10m, add 3.5 per cent of cost
as above excluding formwork. For cost of
formwork add 14 per cent of cost of material,
labour and machinery
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5414.00
Machinery (a+b+c) of Item 12.8 (G) Case I
d) formwork
Add 14 per cent of cost of material, labour and 14.00 757.96
machinery (a+b+c) for Formwork
243
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 3.5 per cent of cost of material, Labour 3.50 189.49
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 636.15
(a+b+c+d)
f) Contractor's profit @ 10 % on 699.76
(a+b+c+d+e)
7697.35
Add 1% labour cess 76.97
Rate perm (a+b+c+d+e+f) 7774.33
Add 12% GST 932.92
Rate per cum 8707.25
say 8707.00
3.5 G (r) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 9641.00
Machinery (a+b+c) of Item 12.8 (G) Case II
d) formwork
Add 14 per cent of cost of material, labour and 14.00 1349.74
machinery (a+b+c) for Formwork
Add 3.5 per cent of cost of material, Labour 3.50 337.44
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 1132.82
(a+b+c+d)
f) Contractor's profit @ 10 % on 1246.10
(a+b+c+d+e)
13707.09
Add 1% labour cess 137.07
Rate perm (a+b+c+d+e+f) 13844.16
Add 12% GST 1661.30
Rate per cum 15505.46
say 15505.00
3.5 H RCC Grade M35
(p) Height upto 5m
Same as Item 12.8 (H) upto 5m height,
excluding formwork. For cost of formwork, add
10 per cent of cost of material, labour and
machinery instead of 3 per cent .
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5519.00
Machinery (a+b+c) of Item 12.8 (H) Case I
d) formwork
Add 10 per cent of cost of material, labour and 10.00 551.90
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 607.09
(a+b+c+d)
f) Contractor's profit @ 10 % on 667.80
(a+b+c+d+e)
7345.79
Add 1% labour cess 73.46
244
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate perm (a+b+c+d+e+f) 7419.25
Add 12% GST 890.31
Rate per cum 8309.56
say 8310.00
3.5 H (p) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 10017.00
Machinery (a+b+c) of Item 12.8 (H) Case II
d) formwork
Add 10 per cent of cost of material, labour and 10.00 1001.70
machinery (a+b+c) for Formwork
e) Overhead charges @ 10 % on 1101.87
(a+b+c+d)
f) Contractor's profit @ 10 % on 1212.06
(a+b+c+d+e)
13332.63
Add 1% labour cess 133.33
Rate perm (a+b+c+d+e+f) 13465.95
Add 12% GST 1615.91
Rate per cum 15081.87
say 15082.00
3.5 H (q) Height 5m to 10m
For height, upto 10m, add 1.4 per cent of cost
as above excluding formwork. For cost of
formwork add 11 per cent of cost of material,
labour and machinery .
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5519.00
Machinery (a+b+c) of Item 12.8 (H) Case I
d) formwork
Add 11 per cent of cost of material, labour and 11.00 607.09
machinery (a+b+c) for Formwork
Add 1.4 per cent of cost of material, Labour 1.40 77.27
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 620.34
(a+b+c+d)
f) Contractor's profit @ 10 % on 682.37
(a+b+c+d+e)
7506.06
Add 1% labour cess 75.06
Rate perm (a+b+c+d+e+f) 7581.12
Add 12% GST 909.73
Rate per cum 8490.86
say 8491.00
3.5 H (q) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 10017.00
Machinery (a+b+c) of Item 12.8 (H) Case II
d) formwork
245
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 11 per cent of cost of material, labour and 11.00 1101.87
machinery (a+b+c) for Formwork
Add 1.4 per cent of cost of material, Labour 1.40 140.24
and machinery excluding formwork to cater for
extra lift
e) Overhead charges @ 10 % on 1125.91
(a+b+c+d)
f) Contractor's profit @ 10 % on 1238.50
(a+b+c+d+e)
13623.52
Add 1% labour cess 136.24
Rate perm (a+b+c+d+e+f) 13759.76
Add 12% GST 1651.17
Rate per cum 15410.93
say 15411.00
3.5 H (r) Height above 10m
For height, above 10m, add 3 per cent of cost
as above excluding formwork. For cost of
formwork add 13 per cent of cost of material,
labour and machinery
Case I Using concrete Mixer
Per Cum Basic Cost of Labour, Material & 5519.00
Machinery (a+b+c) of Item 12.8 (H) Case I
d) formwork
Add 13 per cent of cost of material, labour and 13.00 717.47
machinery (a+b+c) for Formwork
Add 3 per cent of cost of material, Labour and 3.00 165.57
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 640.20
(a+b+c+d)
f) Contractor's profit @ 10 % on 704.22
(a+b+c+d+e)
7746.47
Add 1% labour cess 77.46
Rate perm (a+b+c+d+e+f) 7823.93
Add 12% GST 938.87
Rate per cum 8762.81
say 8763.00
3.5 H (r) Case II With Batching Plant, Transit Mixer and
Concrete Pump
Per Cum Basic Cost of Labour, Material & 10017.00
Machinery (a+b+c) of Item 12.8 (H) Case II
d) formwork
Add 13 per cent of cost of material, labour and 13.00 1302.21
machinery (a+b+c) for Formwork
Add 3 per cent of cost of material, Labour and 3.00 300.51
machinery excluding formwork to cater for extra
lift
e) Overhead charges @ 10 % on 1161.97
(a+b+c+d)
246
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 1278.17
(a+b+c+d+e)
14059.86
Add 1% labour cess 140.60
Rate perm (a+b+c+d+e+f) 14200.46
Add 12% GST 1704.06
Rate per cum 15904.51
say 15905.00
Note The basic components of this analysis are the
same as those of items 13.8 (A to H). The only
changes are as under:
a) Ramps/Stairs: Extra expenditure on
structures which are more than 5 m high @ 2
per cent of cost for height upto 10 m and 4 per
cent for heights above 10 m will be involved for
approaching the work spot by providing higher
ramp/stair case for use by the working parties.
b) The above mentioned percentages have
been suitably modified for different categories as
cost for various categories varies, whereas effort
for access for same height will be similar. As the
cost of richer concrete is comparatively more,
the percentage to be added has been reduced
to maintain the same cost for extra efforts.
Output: MT
Taking output = 1 MT
a) Material
HYSD bars including 5 per cent overlaps and tonne 1.05 59875.00 62868.75
wastage
Binding wire kg 6.00 80.00 480.00
b) Labour for cutting, bending, shifting to
site, tying and placing in position
Mate day 0.34 350.00 119.00
Blacksmith day 2.00 505.17 1010.33
Mazdoor day 6.50 350.00 2275.00
c) Overhead charges @ 10 % on (a+b) 6675.31
d) Contractor's profit @ 10 % on (a+b+c) 7342.84
80771.23
Add 1% labour cess 807.71
Rate for per MT (a+b+c+d) 81578.94
Add 12% GST 9789.47
Rate per cum 91368.42
say 91368.00
Labour f:- 3404.33
247
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
c) Overhead charges @ 10 % on (a+b) 340.43
d) Contractor's profit @ 10 % on (a+b+c) 374.48
4119.24
Add 1% labour cess 41.19
Rate for per MT (a+b+c+d) 4160.44
Add 12% GST 499.25
Rate per MT 4659.69
say 4660.00
3.7 1600 & Supplying, fitting and placing Mild steel
2200 reinforcement complete in sub-structure as
per drawing and Technical Specification
Unit = MT
Taking output = 1 MT
a) Material
MS bars including 5 per cent overlaps and tonne 1.05 58000.00 60900.00
wastage
Binding wire kg 6.00 80.00 480.00
b) Labour for straightening, cutting,
bending, shifting to site, tying and placing in
position
Mate day 0.28 350.00 98.00
Blacksmith day 1.50 505.17 757.75
Mazdoor day 5.50 350.00 1925.00
c) Overhead charges @ 10 % on (a+b) 6416.08
d) Contractor's profit @ 10 % on (a+b+c) 7057.68
77634.51
Add 1% labour cess 776.35
Rate for per MT (a+b+c+d) 78410.85
Add 12% GST 9409.30
Rate per MT 87820.15
say 78411.00
3.8 2706 & Providing weep holes in Brick masonry /
2200 Plain / Reinforced concrete abutment, wing
wall / return wall with 100 mm dia AC pipe,
extending through the full width of the
structure with slope of 1V :20H towards
drawing foce. Complete as per drawing and
Technical Specifications
Unit = Nos.
Taking output = 30 Nos.
a) Material
AC pipe 100 mm dia. (including wastage @ 5 metre 31.50 150.00 4725.00
per cent )
Average length of weep hole is taken as one
metre for the purpose of estimating.
MS clamp each. 30.00 180.00 5400.00
248
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
collar for AC pipe (average) taking 10% of above each. 10.00 15.00 150.00
pipe rate
Cement mortar 1:3 (Rate as in Item 12.6) cum 0.05 5049.00 252.45
b) Labour
Mate day 0.03 350.00 10.50
Mason day 0.50 505.17 252.58
Mazdoor day 0.25 350.00 87.50
c) Overhead charges @ 10 % on (a+b) 1087.80
d) Contractor's profit @ 10 % on (a+b+c) 1196.58
13162.42
Add 1% labour cess 131.62
Cost for 30 m = a+b+c+d 13294.04
Rate per m (a+b+c+d)/30 443.13
Add 12% GST 53.18
Rate per M 496.31
say 496.00
Note 1. In case of stone masonry, the size of the
weep hole shall be 150 mm x 80 mm or circular
with 150 mm diameter.
2. For structure in stone masonry, the weep
holes shall be deemed to be included in the item
of stone masonry work and shall not be paid
separately.
3.9 710.1.4.of Back filling behind abutment, wing wall and
IRC:78 & return wall complete as per drawing and
2200 Technical Specification
Unit = cum
Taking output = 10 cum
A Granular material
a) Labour
Mate day 0.28 350.00 98.00
Mazdoor day 7.00 350.00 2450.00
b) Material
Granular material cum 12.00 376.00 4512.00
c) Machinery
Plate compactor/power rammer hour 2.50 100.00 250.00
Water Tanker hour 0.05 500.00 25.00
d) Overhead charges @ 10 % on (a+b+c) 733.50
e) Contractor's profit @ 10 % on 806.85
(a+b+c+d)
8875.35
Add 1% labour cess 88.75
Cost for 10 cum of granular backfill = 8964.10
a+b+c+d+e
Rate per cum = (a+b+c+d+e)/10 896.41
Add 12% GST 107.57
Rate per Cum 1003.98
249
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 1004.00
3.9 B Sandy material
a) Labour
Mate day 0.28 350.00 98.00
Mazdoor for filling, watering, ramming etc. day 7.00 350.00 2450.00
b) Material
Sand cum 12.00 1167.00 14004.00
c) Machinery
Plate compactor/power rammer hour 2.50 100.00 250.00
Water Tanker hour 0.06 500.00 30.00
d) Overhead charges @ 10 % on (a+b+c) 1683.20
e) Contractor's profit @ 10 % on 1851.52
(a+b+c+d)
20366.72
Add 1% labour cess 203.67
Cost for 10 cum of sandy backfill = a+b+c+d+e 20570.39
Rate per cum = (a+b+c+d+e)/10 2057.04
Add 12% GST 246.84
Rate per Cum 2303.88
say 2304.00
3.10 710.1.4.of Providing and laying of Filter media with
IRC:78 granular materials/stone crushed aggregates
and 2200 satisfying the requirements laid down in
clause 2504.2.2. of MoRTH specifications to
a thickness of not less than 600 mm with
smaller size towards the soil and bigger size
towards the wall and provided over the entire
surface behind abutment, wing wall and
return wall to the full height compacted to a
firm condition complete as per drawing and
Technical Specification.
Unit = cum
Taking output = 10 cum.
a) Labour
Mate day 0.32 350.00 112.00
Mazdoor for filling, watering, ramming etc. day 7.00 350.00 2450.00
Mazdoor (Skilled) day 1.00 350.00 350.00
b) Material
Filter media of stone aggregate conforming to cum 12.00 600.00 7200.00
clause 2504.2.2. of MoRTH specifications.
c) Machinery
Water Tanker of 6 KL capacity hour 0.06 500.00 30.00
d) Overhead charges @ 10 % on (a+b+c) 1014.20
250
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
cost for 10 cum of Fiter Media = a+b+c+d+e 12394.54
92318.16
Add 1% labour cess 923.18
cost for 250 tonnes capacity bearing = a+b+c+d 93241.34
Rate per tonne capacity = (a+b+c+d)/250 372.97
Add 12% GST 44.76
Rate per Tonne . 417.72
say 418.00
3.12 2000 , Supplying, fitting and fixing in position true
1000 & to line and level forged steel roller bearing
2200 conforming to IRC: 83(Pt.-1) section IX and
clause 2003 of MoRTH specifications
complete including all accessories as per
drawing and Technical Specifications.
251
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mate day 0.06 350.00 21.00
Mazdoor day 1.00 350.00 350.00
Mazdoor (Skilled) day 0.50 350.00 175.00
b) Material
Forged steel roller bearing of 250 tonne design each. 1.00 110000.00 110000.00
load capacity duly painted complete with all its
components as per drawing and specifications
Add 1 per cent of cost of bearing assembly for 1100.00
foundation anchorage bolts, lifting
arrangements, grease and other consumables.
c) Overhead charges @ 10 % on (a+b) 11164.60
d) Contractor's profit @ 10 % on (a+b+c) 12281.06
135091.66
Add 1% labour cess 1350.92
cost for 250 tonnes capacity bearing = a+b+c+d 136442.58
Rate per tonne capacity = (a+b+c+d)/250 545.77
Add 12% GST 65.49
Rate per Tonne . 611.26
say 611.00
3.13 2000 & Supplying, fitting and fixing in position true
2200 to line and level sliding plate bearing with
PTFE surface sliding on stainless steel
complete including all accessories as per
drawing and Technical Specifications and
BS: 5400, section 9.1 & 9.2 (for PTFE) and
clause 2004 of MoRTH Specifications.
220638.66
Add 1% labour cess 2206.39
cost for 80 tonnes capacity bearing = a+b+c+d 222845.05
252
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per tonne capacity = (a+b+c+d)/80 2785.56
110649.66
Add 1% labour cess 1106.50
cost for 19200cc of elastomeric bearing = 111756.16
a+b+c+d
Rate per cc of elastomeric bearing = 5.82
(a+b+c+d)/19200
Add 12% GST 0.70
Rate per cc of elastomeric bearing 6.52
say 7.00
3.15 2000 & Supplying, fitting and fixing in position true
2200 to line and level sliding plate bearing with
stainless steel plate sliding on stainless
steel plate with mild steel matrix complete
including all accessories as per drawing and
Technical Specifications.
Unit: one tonne capacity
Considering the sliding bearing of 80 tonnes
design capacity for this analysis.
253
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a) Labour
Mate day 0.04 350.00 14.00
Mazdoor day 0.75 350.00 262.50
Mazdoor (Skilled) day 0.35 350.00 122.50
b) Material
Supply of sliding plate bearing of 80 tonne each. 1.00 55000.00 55000.00
design capacity complete as per drawings and
Technical Specifications.
Add 1 per cent of cost of bearing assembly for 550.00
foundation anchorage bolts and consumables.
c) Overhead charges @ 10 % on (a+b) 5594.90
d) Contractor's profit @ 10 % on (a+b+c) 6154.39
67698.29
Add 1% labour cess 676.98
cost for 80 tonnes of capacity bearing = 68375.27
a+b+c+d
854.69
Add 12% GST 102.56
Rate for 80 tonnes of capacity bearing 957.25
say 957.00
3.16 2000 & Supplying, fitting and fixing in position true
2200 to line and level POT-PTFE bearing
consisting of a metal piston supported by a
disc or unreinforced elastomer confined
within a metal cylinder, sealing rings, dust
seals, PTFE surface sliding against stainless
steel mating surface, complete assembly to
be of cast steel/fabricated structural steel,
metal and elastomer elements to be as per
IRC: 83 part-I & II respectively and other
parts conforming to BS: 5400, section 9.1 &
9.2 and clause 2006 of MoRTH Specifications
complete as per drawing and approved
Technical Specifications.
254
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Pot type bearing assembly consisting of a metal each. 1.00 180000.00 180000.00
piston supported by a disc, PTFE pads providing
sliding surfaces against stainless steel mating
together with cast steel assemblies/fabricated
structural steel assemblies duly painted with all
components as per clause 2006 and complete
as per drawings and Technical Specifications.
220858.88
Add 1% labour cess 2208.59
cost for 250 tonnes capacity bearing = a+b+c+d 223067.47
Rate per tonne capacity = (a+b+c+d)/250 892.27
Add 12% GST 107.07
Rate per tonne capacity 999.34
say 999.00
255
Chapter-4:
S uperstructure
P ream ble:
T he item m ay be selected asper approved design. In case the thicknessof w earing coat is
different from that analysed,the rate forthe desired thicknessm ay be w orked out on pro-rata
basis.
2. T he rate analysishasbeen done both forR CC railing and M .S .R ailing,w hichcan be adopted asper
approved design.
3. T he length ofdrainage spout hasbeen provided in such aw ay that it isconnected to the drainage
system on the ground in case ofFlyoversand there isno splashing ofw ateron the structure in
case ofbridges.
4. T he rate foranti-corrosive treatm ent isrequired to be ascertained from firm specialized in this
concern CircularN o. R W /N H-34041/44/91-S&R dated 21-03-2000 ofM inistry ofR oad T ransport
and Highw ay m ay be referred forfurtherdetails.
5. Expansion joints involving m ovem ents exceeding 40 m m are specialized readym ade item s ,
com m ercially produced by reputed firm sw ith im ported technology and parts.T he ratesforsuch
jointsare required to be ascertained from the firm sper-qualified by the M inistry.
6. T he rate analysisforpre-cast and pre-tensioned girdershasalso been included.
7. T he rate analysisforprestressed cem ent concrete ofM -60 grade also been included w hich can be
adopted forbridgesw ith innovative design / construction.
8. M oR T &H letterN o.R W /N H-34059/I/96 S &R dated 1.1.2000 and subsequent corrigendum dated
25.1.2001 m ay be referred for detailed specifications and provisions for various types of
expansion joints.
9. S upply ofnew type ofexpansion jointsm ay be obtained on the basisofcom petitive bidding from
am ongst the supplierspre-qualified by the M inistry ofR oad T ransport and Highw ays. Further,a
w arranty of10 yearsoftrouble free perform ance m ay be insisted from the suppliers.
10. For bridge, having w ide desk/span length of m ore than 120 m or/and involving com plex
m ovem ents/ rotationsin different directions/ planes ,provision of special type of m odular
expansion jointssuch as sw iveljointsare required for w hich specialized in thisfield m ay be
consulted.S uchcasesw illrequire priorapprovalofM inistry.
256
CHAPTER-4
SUPER-STRUCTURE
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4.1 1500 &1600 Furnishing and Placing Reinforced/
1700 Prestressed cement concrete in super-
structure as per drawing and Technical
Specification
A RCC Grade M20
Case I Using Concrete Mixer
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 5.12 6875.00 35200.00
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 350.00 2100.00
Generator 33 KVA hour 6.00 630.00 3780.00
Basic Cost of Labour, Material & 74465.00
Machinery (a+b+c) for 15 cum
For formwork and staging add the
following:
4.1A Case I (i) For solid slab super-structure, 20-30 per
cent of (a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
d) Formwork and staging 20 per cent 20.00 14893.00
of (a+b+c)
e) Overhead charges @ 10 % on 8935.80
(a+b+c+d)
f) Contractor's profit @ 10 % on 9829.38
(a+b+c+d+e)
108123.18
Add 1% labour cess 1081.23
Cost for 15 cum = a+b+c+d+e+f 109204.41
Rate per cum = (a+b+c+d+e+f)/15 7280.29
Add 12% GST 873.64
Rate per Cum 8153.93
say 8154.00
4.1A Case I (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
257
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Formwork and staging 25 per cent 25.00 18616.25
of (a+b+c)
e) Overhead charges @ 10 % on 9308.13
(a+b+c+d)
f) Contractor's profit @ 10 % on 10238.94
(a+b+c+d+e)
112628.31
Add 1% labour cess 1126.28
Cost for 15 cum = a+b+c+d+e+f 113754.60
Rate per cum = (a+b+c+d+e+f)/15 7583.64
Add 12% GST 910.04
Rate per Cum 8493.68
say 8494.00
4.1A Case I (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 22339.50
of (a+b+c)
e) Overhead charges @ 10 % on 9680.45
(a+b+c+d)
f) Contractor's profit @ 10 % on 10648.50
(a+b+c+d+e)
117133.45
Add 1% labour cess 1171.33
Cost for 15 cum = a+b+c+d+e+f 118304.78
Rate per cum = (a+b+c+d+e+f)/15 7886.99
Add 12% GST 946.44
Rate per Cum 8833.42
say 8833.00
4.1A Case I (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
d) Formwork and staging 25 per cent 25.00 18616.25
of (a+b+c)
e) Overhead charges @ 10 % on 9308.13
(a+b+c+d)
f) Contractor's profit @ 10 % on 10238.94
(a+b+c+d+e)
112628.31
Add 1% labour cess 1126.28
Cost for 15 cum = a+b+c+d+e+f 113754.60
Rate per cum = (a+b+c+d+e+f)/15 7583.64
Add 12% GST 910.04
Rate per Cum 8493.68
say 8494.00
4.1A Case I (ii) (q) Height 5m to 10m
258
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 22339.50
of (a+b+c)
e) Overhead charges @ 10 % on 9680.45
(a+b+c+d)
f) Contractor's profit @ 10 % on 10648.50
(a+b+c+d+e)
117133.45
Add 1% labour cess 1171.33
Cost for 15 cum = a+b+c+d+e+f 118304.78
Rate per cum = (a+b+c+d+e+f)/15 7886.99
Add 12% GST 946.44
Rate per Cum 8833.42
say 8833.00
4.1A Case I (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 74465.00
(a+b+c) for 15 cum
d) Formwork and staging 35 per cent 35.00 26062.75
of (a+b+c)
e) Overhead charges @ 10 % on 10052.78
(a+b+c+d)
f) Contractor's profit @ 10 % on 11058.05
(a+b+c+d+e)
121638.58
Add 1% labour cess 1216.39
Cost for 15 cum = a+b+c+d+e+f 122854.96
Rate per cum = (a+b+c+d+e+f)/15 8190.33
Add 12% GST 982.84
Rate per Cum 9173.17
say 9173.00
4.1A Case II Using Batching Plant, Transit Mixer and
Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 40.92 6875.00 281325.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
259
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
260
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 143356.72
(a+b+c+d)
f) Contractor's profit @ 10 % on 157692.39
(a+b+c+d+e)
1734616.31
Add 1% labour cess 17346.16
Cost for 120 cum = a+b+c+d+e+f 1751962.48
Rate per cum = (a+b+c+d+e+f)/120 14599.69
Add 12% GST 1751.96
Rate per Cum 16351.65
say 16352.00
4.1A Case II (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1102744.00
(a+b+c) for 120 cum
d) Formwork and staging 25 per cent 25.00 275686.00
of (a+b+c)
e) Overhead charges @ 10 % on 137843.00
(a+b+c+d)
f) Contractor's profit @ 10 % on 151627.30
(a+b+c+d+e)
1667900.30
Add 1% labour cess 16679.00
Cost for 120 cum = a+b+c+d+e+f 1684579.30
Rate per cum = (a+b+c+d+e+f)/120 14038.16
Add 12% GST 1684.58
Rate per Cum 15722.74
say 15723.00
4.1A Case II (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1102744.00
(a+b+c) for 120 cum
d) Formwork and staging 30 per cent 30.00 330823.20
of (a+b+c)
e) Overhead charges @ 10 % on 143356.72
(a+b+c+d)
f) Contractor's profit @ 10 % on 157692.39
(a+b+c+d+e)
1734616.31
Add 1% labour cess 17346.16
Cost for 120 cum = a+b+c+d+e+f 1751962.48
Rate per cum = (a+b+c+d+e+f)/120 14599.69
Add 12% GST 1751.96
Rate per Cum 16351.65
say 16352.00
4.1A Case II (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1102744.00
(a+b+c) for 120 cum
261
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Formwork and staging 35 per cent 35.00 385960.40
of (a+b+c)
e) Overhead charges @ 10 % on 148870.44
(a+b+c+d)
f) Contractor's profit @ 10 % on 163757.48
(a+b+c+d+e)
1801332.32
Add 1% labour cess 18013.32
Cost for 120 cum = a+b+c+d+e+f 1819345.65
Rate per cum = (a+b+c+d+e+f)/120 15161.21
Add 12% GST 1819.35
Rate per Cum 16980.56
say 16981.00
4.1 B RCC Grade M25
Case I Using Concrete Mixer
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 5.99 6875.00 41181.25
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.86 350.00 301.00
Mason day 1.50 505.17 757.75
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 350.00 2100.00
262
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum = (a+b+c+d+e+f)/15 7865.04
Add 12% GST 943.81
Rate per Cum 8808.85
say 8809.00
4.1B Case I (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 80446.00
(a+b+c) for 15 cum
d) Formwork and staging 25 per cent 25.00 20111.50
of (a+b+c)
e) Overhead charges @ 10 % on 10055.75
(a+b+c+d)
f) Contractor's profit @ 10 % on 11061.33
(a+b+c+d+e)
121674.58
Add 1% labour cess 1216.75
Cost for 15 cum = a+b+c+d+e+f 122891.32
Rate per cum = (a+b+c+d+e+f)/15 8192.75
Add 12% GST 983.13
Rate per Cum 9175.89
say 9176.00
4.1B Case I (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 80446.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 24133.80
of (a+b+c)
e) Overhead charges @ 10 % on 10457.98
(a+b+c+d)
f) Contractor's profit @ 10 % on 11503.78
(a+b+c+d+e)
126541.56
Add 1% labour cess 1265.42
Cost for 15 cum = a+b+c+d+e+f 127806.97
Rate per cum = (a+b+c+d+e+f)/15 8520.46
Add 12% GST 1022.46
Rate per Cum 9542.92
say 9543.00
4.1B Case I (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 80446.00
(a+b+c) for 15 cum
d) Formwork and staging 25 per cent 25.00 20111.50
of (a+b+c)
e) Overhead charges @ 10 % on 10055.75
(a+b+c+d)
f) Contractor's profit @ 10 % on 11061.33
(a+b+c+d+e)
121674.58
Add 1% labour cess 1216.75
263
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 15 cum = a+b+c+d+e+f 122891.32
Rate per cum = (a+b+c+d+e+f)/15 8192.75
Add 12% GST 983.13
Rate per Cum 9175.89
say 9176.00
4.1B Case I (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 80446.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 24133.80
of (a+b+c)
e) Overhead charges @ 10 % on 10457.98
(a+b+c+d)
f) Contractor's profit @ 10 % on 11503.78
(a+b+c+d+e)
126541.56
Add 1% labour cess 1265.42
Cost for 15 cum = a+b+c+d+e+f 127806.97
Rate per cum = (a+b+c+d+e+f)/15 8520.46
Add 12% GST 1022.46
Rate per Cum 9542.92
say 9543.00
4.1B Case I (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 80446.00
(a+b+c) for 15 cum
d) Formwork and staging 35 per cent 35.00 28156.10
of (a+b+c)
e) Overhead charges @ 10 % on 10860.21
(a+b+c+d)
f) Contractor's profit @ 10 % on 11946.23
(a+b+c+d+e)
131408.54
Add 1% labour cess 1314.09
Cost for 15 cum = a+b+c+d+e+f 132722.63
Rate per cum = (a+b+c+d+e+f)/15 8848.18
Add 12% GST 1061.78
Rate per Cum 9909.96
say 9910.00
4.1B Case II Using Batching Plant, Transit Mixer and
Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 47.95 6875.00 329656.25
Coarse sand cum 54.20 1214.00 65798.80
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
264
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mate day 0.84 350.00 294.00
Mason day 3.00 505.17 1515.50
Mazdoor day 18.00 350.00 6300.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
265
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per Cum 16415.30
say 16415.00
4.1B Case II (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1151318.00
(a+b+c) for 120 cum
d) Formwork and staging 30 per cent 30.00 345395.40
of (a+b+c)
e) Overhead charges @ 10 % on 149671.34
(a+b+c+d)
f) Contractor's profit @ 10 % on 164638.47
(a+b+c+d+e)
1811023.21
Add 1% labour cess 18110.23
Cost for 120 cum = a+b+c+d+e+f 1829133.45
Rate per cum = (a+b+c+d+e+f)/120 15242.78
Add 12% GST 1829.13
Rate per Cum 17071.91
say 17072.00
4.1B Case II (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1151318.00
(a+b+c) for 120 cum
d) Formwork and staging 25 per cent 25.00 287829.50
of (a+b+c)
e) Overhead charges @ 10 % on 143914.75
(a+b+c+d)
f) Contractor's profit @ 10 % on 158306.23
(a+b+c+d+e)
1741368.48
Add 1% labour cess 17413.68
Cost for 120 cum = a+b+c+d+e+f 1758782.16
Rate per cum = (a+b+c+d+e+f)/120 14656.52
Add 12% GST 1758.78
Rate per Cum 16415.30
say 16415.00
4.1B Case II (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1151318.00
(a+b+c) for 120 cum
d) Formwork and staging 30 per cent 30.00 345395.40
of (a+b+c)
e) Overhead charges @ 10 % on 149671.34
(a+b+c+d)
f) Contractor's profit @ 10 % on 164638.47
(a+b+c+d+e)
1811023.21
Add 1% labour cess 18110.23
Cost for 120 cum = a+b+c+d+e+f 1829133.45
Rate per cum = (a+b+c+d+e+f)/120 15242.78
266
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 1829.13
Rate per Cum 17071.91
say 17072.00
4.1B Case II (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1151318.00
(a+b+c) for 120 cum
d) Formwork and staging 35 per cent 35.00 402961.30
of (a+b+c)
e) Overhead charges @ 10 % on 155427.93
(a+b+c+d)
f) Contractor's profit @ 10 % on 170970.72
(a+b+c+d+e)
1880677.95
Add 1% labour cess 18806.78
Cost for 120 cum = a+b+c+d+e+f 1899484.73
Rate per cum = (a+b+c+d+e+f)/120 15829.04
Add 12% GST 1899.48
Rate per Cum 17728.52
say 17729.00
4.1 C RCC Grade M 30
Case I Using Concrete Mixer
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 6.10 6875.00 41937.50
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 505.17 757.75
Mazdoor day 21.00 350.00 7350.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 350.00 2100.00
267
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 9788.04
(a+b+c+d)
f) Contractor's profit @ 10 % on 10766.84
(a+b+c+d+e)
118435.28
Add 1% labour cess 1184.35
Cost for 15 cum = a+b+c+d+e+f 119619.64
Rate per cum = (a+b+c+d+e+f)/15 7974.64
Add 12% GST 956.96
Rate per Cum 8931.60
say 8932.00
4.1C Case I (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 81567.00
(a+b+c) for 15 cum
d) Formwork and staging 25 per cent 25.00 20391.75
of (a+b+c)
e) Overhead charges @ 10 % on 10195.88
(a+b+c+d)
f) Contractor's profit @ 10 % on 11215.46
(a+b+c+d+e)
123370.09
Add 1% labour cess 1233.70
Cost for 15 cum = a+b+c+d+e+f 124603.79
Rate per cum = (a+b+c+d+e+f)/15 8306.92
Add 12% GST 996.83
Rate per Cum 9303.75
say 9304.00
4.1C Case I (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 81567.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 24470.10
of (a+b+c)
e) Overhead charges @ 10 % on 10603.71
(a+b+c+d)
f) Contractor's profit @ 10 % on 11664.08
(a+b+c+d+e)
128304.89
Add 1% labour cess 1283.05
Cost for 15 cum = a+b+c+d+e+f 129587.94
Rate per cum = (a+b+c+d+e+f)/15 8639.20
Add 12% GST 1036.70
Rate per Cum 9675.90
say 9676.00
4.1C Case I (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 81567.00
(a+b+c) for 15 cum
268
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
d) Formwork and staging 25 per cent 25.00 20391.75
of (a+b+c)
e) Overhead charges @ 10 % on 10195.88
(a+b+c+d)
f) Contractor's profit @ 10 % on 11215.46
(a+b+c+d+e)
123370.09
Add 1% labour cess 1233.70
Cost for 15 cum = a+b+c+d+e+f 124603.79
Rate per cum = (a+b+c+d+e+f)/15 8306.92
Add 12% GST 996.83
Rate per Cum 9303.75
say 9304.00
4.1C Case I (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 81567.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 24470.10
of (a+b+c)
e) Overhead charges @ 10 % on 10603.71
(a+b+c+d)
f) Contractor's profit @ 10 % on 11664.08
(a+b+c+d+e)
128304.89
Add 1% labour cess 1283.05
Cost for 15 cum = a+b+c+d+e+f 129587.94
Rate per cum = (a+b+c+d+e+f)/15 8639.20
Add 12% GST 1036.70
Rate per Cum 9675.90
say 9676.00
4.1C Case I (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 81567.00
(a+b+c) for 15 cum
d) Formwork and staging 35 per cent 35.00 28548.45
of (a+b+c)
e) Overhead charges @ 10 % on 11011.55
(a+b+c+d)
f) Contractor's profit @ 10 % on 12112.70
(a+b+c+d+e)
133239.69
Add 1% labour cess 1332.40
Cost for 15 cum = a+b+c+d+e+f 134572.09
Rate per cum = (a+b+c+d+e+f)/15 8971.47
Add 12% GST 1076.58
Rate per Cum 10048.05
say 10048.00
4.1C Case II Using Batching Plant, Transit Mixer and
Concrete Pump.
Unit = cum
Taking output = 120 cum
269
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a) Material
Cement tonne 48.79 6875.00 335431.25
Coarse sand cum 54.60 1214.00 66284.40
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.88 350.00 308.00
Mason day 3.00 505.17 1515.50
Mazdoor day 19.00 350.00 6650.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
270
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 159217.16
(a+b+c+d+e)
1751388.79
Add 1% labour cess 17513.89
Cost for 120 cum = a+b+c+d+e+f 1768902.68
Rate per cum = (a+b+c+d+e+f)/120 14740.86
Add 12% GST 1768.90
Rate per Cum 16509.76
say 16510.00
4.1C Case II (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1157943.00
(a+b+c) for 120 cum
d) Formwork and staging 30 per cent 30.00 347382.90
of (a+b+c)
e) Overhead charges @ 10 % on 150532.59
(a+b+c+d)
f) Contractor's profit @ 10 % on 165585.85
(a+b+c+d+e)
1821444.34
Add 1% labour cess 18214.44
Cost for 120 cum = a+b+c+d+e+f 1839658.78
Rate per cum = (a+b+c+d+e+f)/120 15330.49
Add 12% GST 1839.66
Rate per Cum 17170.15
say 17170.00
4.1C Case II (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1157943.00
(a+b+c) for 120 cum
d) Formwork and staging 25 per cent 25.00 289485.75
of (a+b+c)
e) Overhead charges @ 10 % on 144742.88
(a+b+c+d)
f) Contractor's profit @ 10 % on 159217.16
(a+b+c+d+e)
1751388.79
Add 1% labour cess 17513.89
Cost for 120 cum = a+b+c+d+e+f 1768902.68
Rate per cum = (a+b+c+d+e+f)/120 14740.86
Add 12% GST 1768.90
Rate per Cum 16509.76
say 16510.00
4.1C Case II (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1157943.00
(a+b+c) for 120 cum
d) Formwork and staging 30 per cent 30.00 347382.90
of (a+b+c)
271
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
e) Overhead charges @ 10 % on 150532.59
(a+b+c+d)
f) Contractor's profit @ 10 % on 165585.85
(a+b+c+d+e)
1821444.34
Add 1% labour cess 18214.44
Cost for 120 cum = a+b+c+d+e+f 1839658.78
Rate per cum = (a+b+c+d+e+f)/120 15330.49
Add 12% GST 1839.66
Rate per Cum 17170.15
say 17170.00
4.1C Case II (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1157943.00
(a+b+c) for 120 cum
d) Formwork and staging 35 per cent 35.00 405280.05
of (a+b+c)
e) Overhead charges @ 10 % on 156322.31
(a+b+c+d)
f) Contractor's profit @ 10 % on 171954.54
(a+b+c+d+e)
1891499.89
Add 1% labour cess 18915.00
Cost for 120 cum = a+b+c+d+e+f 1910414.89
Rate per cum = (a+b+c+d+e+f)/120 15920.12
Add 12% GST 1910.41
Rate per Cum 17830.54
say 17831.00
4.1 D RCC/PSC Grade M35
Case I Using Concrete Mixer.
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 6.33 6875.00 43518.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
10 mm Aggregate cum 5.40 1298.00 7009.20
b) Labour
Mate day 0.90 350.00 315.00
Mason day 1.50 505.17 757.75
Mazdoor day 21.00 350.00 7350.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 350.00 2100.00
272
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
For formwork and staging add the
following:
4.1D Case I (i) For solid slab super-structure, 18-28 per
cent of (a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 18 per cent 18.00 14966.64
of (a+b+c)
e) Overhead charges @ 10 % on 9811.46
(a+b+c+d)
f) Contractor's profit @ 10 % on 10792.61
(a+b+c+d+e)
118718.71
Add 1% labour cess 1187.19
Cost for 15 cum = a+b+c+d+e+f 119905.90
Rate per cum = (a+b+c+d+e+f)/15 7993.73
Add 12% GST 959.25
Rate per Cum 8952.97
say 8953.00
4.1D Case I (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 23 per cent 23.00 19124.04
of (a+b+c)
e) Overhead charges @ 10 % on 10227.20
(a+b+c+d)
f) Contractor's profit @ 10 % on 11249.92
(a+b+c+d+e)
123749.17
Add 1% labour cess 1237.49
Cost for 15 cum = a+b+c+d+e+f 124986.66
Rate per cum = (a+b+c+d+e+f)/15 8332.44
Add 12% GST 999.89
Rate per Cum 9332.34
say 9332.00
4.1D Case I (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 28 per cent 28.00 23281.44
of (a+b+c)
e) Overhead charges @ 10 % on 10642.94
(a+b+c+d)
f) Contractor's profit @ 10 % on 11707.24
(a+b+c+d+e)
128779.62
Add 1% labour cess 1287.80
Cost for 15 cum = a+b+c+d+e+f 130067.42
Rate per cum = (a+b+c+d+e+f)/15 8671.16
273
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 1040.54
Rate per Cum 9711.70
say 9712.00
4.1D Case I (ii) For T-beam & slab, 23-33 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 23 per cent 23.00 19124.04
of (a+b+c)
e) Overhead charges @ 10 % on 10227.20
(a+b+c+d)
f) Contractor's profit @ 10 % on 11249.92
(a+b+c+d+e)
123749.17
Add 1% labour cess 1237.49
Cost for 15 cum = a+b+c+d+e+f 124986.66
Rate per cum = (a+b+c+d+e+f)/15 8332.44
Add 12% GST 999.89
Rate per Cum 9332.34
say 9332.00
4.1D Case I (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 28 per cent 28.00 23281.44
of (a+b+c)
e) Overhead charges @ 10 % on 10642.94
(a+b+c+d)
f) Contractor's profit @ 10 % on 11707.24
(a+b+c+d+e)
128779.62
Add 1% labour cess 1287.80
Cost for 15 cum = a+b+c+d+e+f 130067.42
Rate per cum = (a+b+c+d+e+f)/15 8671.16
Add 12% GST 1040.54
Rate per Cum 9711.70
say 9712.00
4.1D Case I (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 83148.00
(a+b+c) for 15 cum
d) Formwork and staging 33 per cent 33.00 27438.84
of (a+b+c)
e) Overhead charges @ 10 % on 11058.68
(a+b+c+d)
f) Contractor's profit @ 10 % on 12164.55
(a+b+c+d+e)
133810.08
Add 1% labour cess 1338.10
Cost for 15 cum = a+b+c+d+e+f 135148.18
274
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum = (a+b+c+d+e+f)/15 9009.88
Add 12% GST 1081.19
Rate per Cum 10091.06
say 10091.00
4.1D Case I (iii) For box girder and balanced cantilever, 38-
58 per cent of cost of concrete.
275
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 1589.62
Cost for 15 cum = a+b+c+d+e+f 160551.97
Rate per cum = (a+b+c+d+e+f)/15 10703.46
Add 12% GST 1284.42
Rate per Cum 11987.88
say 11988.00
Case II Using Batching Plant, Transit Mixer and
Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 50.64 6875.00 348150.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
b) Labour
Mate day 0.88 350.00 308.00
Mason day 3.00 505.17 1515.50
Mazdoor day 19.00 350.00 6650.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
276
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum = (a+b+c+d+e+f)/120 14059.46
Add 12% GST 1687.13
Rate per Cum 15746.59
say 15747.00
4.1D Case II (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 23 per cent 23.00 269084.59
of (a+b+c)
e) Overhead charges @ 10 % on 143901.76
(a+b+c+d)
f) Contractor's profit @ 10 % on 158291.93
(a+b+c+d+e)
1741211.28
Add 1% labour cess 17412.11
Cost for 120 cum = a+b+c+d+e+f 1758623.40
Rate per cum = (a+b+c+d+e+f)/120 14655.19
Add 12% GST 1758.62
Rate per Cum 16413.82
say 16414.00
4.1D Case II (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 28 per cent 28.00 327581.24
of (a+b+c)
e) Overhead charges @ 10 % on 149751.42
(a+b+c+d)
f) Contractor's profit @ 10 % on 164726.57
(a+b+c+d+e)
1811992.23
Add 1% labour cess 18119.92
Cost for 120 cum = a+b+c+d+e+f 1830112.15
Rate per cum = (a+b+c+d+e+f)/120 15250.93
Add 12% GST 1830.11
Rate per Cum 17081.05
say 17081.00
4.1D Case II (ii) For T-beam & slab, 23-33 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 23 per cent 23.00 269084.59
of (a+b+c)
e) Overhead charges @ 10 % on 143901.76
(a+b+c+d)
f) Contractor's profit @ 10 % on 158291.93
(a+b+c+d+e)
1741211.28
Add 1% labour cess 17412.11
277
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 120 cum = a+b+c+d+e+f 1758623.40
Rate per cum = (a+b+c+d+e+f)/120 14655.19
Add 12% GST 1758.62
Rate per Cum 16413.82
say 16414.00
4.1D Case II (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 28 per cent 28.00 327581.24
of (a+b+c)
e) Overhead charges @ 10 % on 149751.42
(a+b+c+d)
f) Contractor's profit @ 10 % on 164726.57
(a+b+c+d+e)
1811992.23
Add 1% labour cess 18119.92
Cost for 120 cum = a+b+c+d+e+f 1830112.15
Rate per cum = (a+b+c+d+e+f)/120 15250.93
Add 12% GST 1830.11
Rate per Cum 17081.05
say 17081.00
4.1D Case II (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 33 per cent 33.00 386077.89
of (a+b+c)
e) Overhead charges @ 10 % on 155601.09
(a+b+c+d)
f) Contractor's profit @ 10 % on 171161.20
(a+b+c+d+e)
1882773.18
Add 1% labour cess 18827.73
Cost for 120 cum = a+b+c+d+e+f 1901600.91
Rate per cum = (a+b+c+d+e+f)/120 15846.67
Add 12% GST 1901.60
Rate per Cum 17748.28
say 17748.00
4.1D Case II (iii) For box girder and balanced cantilever, 38-
58 per cent of cost of concrete.
278
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
1953554.12
Add 1% labour cess 19535.54
Cost for 120 cum = a+b+c+d+e+f 1973089.66
Rate per cum = (a+b+c+d+e+f)/120 16442.41
Add 12% GST 1973.09
Rate per Cum 18415.50
say 18416.00
4.1D Case II (iii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 48 per cent 48.00 561567.84
of (a+b+c)
e) Overhead charges @ 10 % on 173150.08
(a+b+c+d)
f) Contractor's profit @ 10 % on 190465.09
(a+b+c+d+e)
2095116.02
Add 1% labour cess 20951.16
Cost for 120 cum = a+b+c+d+e+f 2116067.18
Rate per cum = (a+b+c+d+e+f)/120 17633.89
Add 12% GST 2116.07
Rate per Cum 19749.96
say 19750.00
4.1D Case II (iii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1169933.00
(a+b+c) for 120 cum
d) Formwork and staging 58 per cent 58.00 678561.14
of (a+b+c)
e) Overhead charges @ 10 % on 184849.41
(a+b+c+d)
f) Contractor's profit @ 10 % on 203334.36
(a+b+c+d+e)
2236677.91
Add 1% labour cess 22366.78
Cost for 120 cum = a+b+c+d+e+f 2259044.69
Rate per cum = (a+b+c+d+e+f)/120 18825.37
Add 12% GST 2259.04
Rate per Cum 21084.42
say 21084.00
4.1 E PSC Grade M-40
Case 1 Using concrete mixer.
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 6.45 6875.00 44343.75
Coarse sand cum 6.75 1156.00 7803.00
20 mm Aggregate cum 8.10 1298.00 10513.80
279
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
10 mm Aggregate cum 5.40 1298.00 7009.20
Admixture @ 0.4 per cent of cement kg 25.80 160.00 4128.00
b) Labour
Mate day 0.96 350.00 336.00
Mason day 2.00 505.17 1010.33
Mazdoor day 22.00 350.00 7700.00
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 350.00 2100.00
280
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4.1E Case I (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 88725.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 26617.50
of (a+b+c)
e) Overhead charges @ 10 % on 11534.25
(a+b+c+d)
f) Contractor's profit @ 10 % on 12687.68
(a+b+c+d+e)
139564.43
Add 1% labour cess 1395.64
Cost for 15 cum = a+b+c+d+e+f 140960.07
Rate per cum = (a+b+c+d+e+f)/15 9397.34
Add 12% GST 1127.68
Rate per Cum 10525.02
say 10525.00
4.1E Case I (ii) For T-beam & slab, 25-35 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 88725.00
(a+b+c) for 15 cum
d) Formwork and staging 25 per cent 25.00 22181.25
of (a+b+c)
e) Overhead charges @ 10 % on 11090.63
(a+b+c+d)
f) Contractor's profit @ 10 % on 12199.69
(a+b+c+d+e)
134196.56
Add 1% labour cess 1341.97
Cost for 15 cum = a+b+c+d+e+f 135538.53
Rate per cum = (a+b+c+d+e+f)/15 9035.90
Add 12% GST 1084.31
Rate per Cum 10120.21
say 10120.00
4.1E Case I (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 88725.00
(a+b+c) for 15 cum
d) Formwork and staging 30 per cent 30.00 26617.50
of (a+b+c)
e) Overhead charges @ 10 % on 11534.25
(a+b+c+d)
f) Contractor's profit @ 10 % on 12687.68
(a+b+c+d+e)
139564.43
Add 1% labour cess 1395.64
Cost for 15 cum = a+b+c+d+e+f 140960.07
Rate per cum = (a+b+c+d+e+f)/15 9397.34
Add 12% GST 1127.68
Rate per Cum 10525.02
281
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
say 10525.00
4.1E Case I (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 88725.00
(a+b+c) for 15 cum
d) Formwork and staging 35 per cent 35.00 31053.75
of (a+b+c)
e) Overhead charges @ 10 % on 11977.88
(a+b+c+d)
f) Contractor's profit @ 10 % on 13175.66
(a+b+c+d+e)
144932.29
Add 1% labour cess 1449.32
Cost for 15 cum = a+b+c+d+e+f 146381.61
Rate per cum = (a+b+c+d+e+f)/15 9758.77
Add 12% GST 1171.05
Rate per Cum 10929.83
say 10930.00
4.1E Case II Using Batching Plant, Transit Mixer and
Concrete Pump
Unit = cum
Taking output = 120 cum
a) Material
Cement tonne 51.60 6875.00 354750.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture @ 0.4 per cent of cement kg 206.40 160.00 33024.00
b) Labour
Mate day 0.94 350.00 329.00
Mason day 3.50 505.17 1768.08
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
282
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4.1E Case II (i) For solid/voided slab super-structure, 18-
28 per cent of (a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 18 per cent 18.00 217832.58
of (a+b+c)
e) Overhead charges @ 10 % on 142801.36
(a+b+c+d)
f) Contractor's profit @ 10 % on 157081.49
(a+b+c+d+e)
1727896.43
Add 1% labour cess 17278.96
Cost for 120 cum = a+b+c+d+e+f 1745175.40
Rate per cum = (a+b+c+d+e+f)/120 14543.13
Add 12% GST 1745.18
Rate per Cum 16288.30
say 16288.00
4.1E (q) Height 5m to 10m
Case
II (i)
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 23 per cent 23.00 278341.63
of (a+b+c)
e) Overhead charges @ 10 % on 148852.26
(a+b+c+d)
f) Contractor's profit @ 10 % on 163737.49
(a+b+c+d+e)
1801112.38
Add 1% labour cess 18011.12
Cost for 120 cum = a+b+c+d+e+f 1819123.51
Rate per cum = (a+b+c+d+e+f)/120 15159.36
Add 12% GST 1819.12
Rate per Cum 16978.49
say 16978.00
4.1E Case II (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 28 per cent 28.00 338850.68
of (a+b+c)
e) Overhead charges @ 10 % on 154903.17
(a+b+c+d)
f) Contractor's profit @ 10 % on 170393.48
(a+b+c+d+e)
1874328.33
Add 1% labour cess 18743.28
Cost for 120 cum = a+b+c+d+e+f 1893071.62
Rate per cum = (a+b+c+d+e+f)/120 15775.60
Add 12% GST 1893.07
283
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per Cum 17668.67
say 17669.00
4.1E Case II (ii) For T-beam & slab, 23-33 per cent of
(a+b+c)
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 23 per cent 23.00 278341.63
of (a+b+c)
e) Overhead charges @ 10 % on 148852.26
(a+b+c+d)
f) Contractor's profit @ 10 % on 163737.49
(a+b+c+d+e)
1801112.38
Add 1% labour cess 18011.12
Cost for 120 cum = a+b+c+d+e+f 1819123.51
Rate per cum = (a+b+c+d+e+f)/120 15159.36
Add 12% GST 1819.12
Rate per Cum 16978.49
say 16978.00
4.1E Case II (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 28 per cent 28.00 338850.68
of (a+b+c)
e) Overhead charges @ 10 % on 154903.17
(a+b+c+d)
f) Contractor's profit @ 10 % on 170393.48
(a+b+c+d+e)
1874328.33
Add 1% labour cess 18743.28
Cost for 120 cum = a+b+c+d+e+f 1893071.62
Rate per cum = (a+b+c+d+e+f)/120 15775.60
Add 12% GST 1893.07
Rate per Cum 17668.67
say 17669.00
4.1E Case II (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 33 per cent 33.00 399359.73
of (a+b+c)
e) Overhead charges @ 10 % on 160954.07
(a+b+c+d)
f) Contractor's profit @ 10 % on 177049.48
(a+b+c+d+e)
1947544.28
Add 1% labour cess 19475.44
Cost for 120 cum = a+b+c+d+e+f 1967019.73
Rate per cum = (a+b+c+d+e+f)/120 16391.83
284
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 1967.02
Rate per Cum 18358.85
say 18359.00
4.1E Case II (iii) For cast-in-situ box girder, segment
construction and balanced cantilever, 38-
58 per cent of cost of concrete.
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 38 per cent 38.00 459868.78
of (a+b+c)
e) Overhead charges @ 10 % on 167004.98
(a+b+c+d)
f) Contractor's profit @ 10 % on 183705.48
(a+b+c+d+e)
2020760.23
Add 1% labour cess 20207.60
Cost for 120 cum = a+b+c+d+e+f 2040967.84
Rate per cum = (a+b+c+d+e+f)/120 17008.07
Add 12% GST 2040.97
Rate per Cum 19049.03
say 19049.00
4.1E Case II (iii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 48 per cent 48.00 580886.88
of (a+b+c)
e) Overhead charges @ 10 % on 179106.79
(a+b+c+d)
f) Contractor's profit @ 10 % on 197017.47
(a+b+c+d+e)
2167192.13
Add 1% labour cess 21671.92
Cost for 120 cum = a+b+c+d+e+f 2188864.06
Rate per cum = (a+b+c+d+e+f)/120 18240.53
Add 12% GST 2188.86
Rate per Cum 20429.40
say 20429.00
4.1E Case II (iii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1210181.00
(a+b+c) for 120 cum
d) Formwork and staging 58 per cent 58.00 701904.98
of (a+b+c)
e) Overhead charges @ 10 % on 191208.60
(a+b+c+d)
f) Contractor's profit @ 10 % on 210329.46
(a+b+c+d+e)
2313624.04
Add 1% labour cess 23136.24
285
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 120 cum = a+b+c+d+e+f 2336760.28
Rate per cum = (a+b+c+d+e+f)/120 19473.00
Add 12% GST 2336.76
Rate per Cum 21809.76
say 21810.00
4.1F F PSC Grade M-45
Unit = 1 cum
Taking output = 120 cum
a) Material
Cement tonne 55.80 6875.00 383625.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture @ 0.4 per cent of cement kg 223.20 160.00 35712.00
b) Labour
Mate day 0.94 350.00 329.00
Mason day 3.50 505.17 1768.08
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
286
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per cum = (a+b+c+d+e+f)/120 14669.51
Add 12% GST 1760.34
Rate per Cum 16429.85
say 16430.00
4.1F (i) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 21 per cent 21.00 260766.24
of (a+b+c)
e) Overhead charges @ 10 % on 150251.02
(a+b+c+d)
f) Contractor's profit @ 10 % on 165276.13
(a+b+c+d+e)
1818037.39
Add 1% labour cess 18180.37
Cost for 120 cum = a+b+c+d+e+f 1836217.76
Rate per cum = (a+b+c+d+e+f)/120 15301.81
Add 12% GST 1836.22
Rate per Cum 17138.03
say 17138.00
4.1F (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 26 per cent 26.00 322853.44
of (a+b+c)
e) Overhead charges @ 10 % on 156459.74
(a+b+c+d)
f) Contractor's profit @ 10 % on 172105.72
(a+b+c+d+e)
1893162.90
Add 1% labour cess 18931.63
Cost for 120 cum = a+b+c+d+e+f 1912094.53
Rate per cum = (a+b+c+d+e+f)/120 15934.12
Add 12% GST 1912.09
Rate per Cum 17846.22
say 17846.00
4.1F (ii) For T-beam & slab including launching of
precast girders by launching truss upto 40
m span, 21-31 per cent of cost of
concrete.
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 21 per cent 21.00 260766.24
of (a+b+c)
e) Overhead charges @ 10 % on 150251.02
(a+b+c+d)
f) Contractor's profit @ 10 % on 165276.13
(a+b+c+d+e)
287
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
1818037.39
Add 1% labour cess 18180.37
Cost for 120 cum = a+b+c+d+e+f 1836217.76
Rate per cum = (a+b+c+d+e+f)/120 15301.81
Add 12% GST 1836.22
Rate per Cum 17138.03
say 17138.00
4.1F (ii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 26 per cent 26.00 322853.44
of (a+b+c)
e) Overhead charges @ 10 % on 156459.74
(a+b+c+d)
f) Contractor's profit @ 10 % on 172105.72
(a+b+c+d+e)
1893162.90
Add 1% labour cess 18931.63
Cost for 120 cum = a+b+c+d+e+f 1912094.53
Rate per cum = (a+b+c+d+e+f)/120 15934.12
Add 12% GST 1912.09
Rate per Cum 17846.22
say 17846.00
4.1F (ii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 31 per cent 31.00 384940.64
of (a+b+c)
e) Overhead charges @ 10 % on 162668.46
(a+b+c+d)
f) Contractor's profit @ 10 % on 178935.31
(a+b+c+d+e)
1968288.41
Add 1% labour cess 19682.88
Cost for 120 cum = a+b+c+d+e+f 1987971.30
Rate per cum = (a+b+c+d+e+f)/120 16566.43
Add 12% GST 1987.97
Rate per Cum 18554.40
say 18554.00
4.1F (iii) For cast-in-situ box girder, segmental
construction and balanced cantilever, 36-
56 per cent of cost of concrete.
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 36 per cent 36.00 447027.84
of (a+b+c)
e) Overhead charges @ 10 % on 168877.18
(a+b+c+d)
288
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 185764.90
(a+b+c+d+e)
2043413.93
Add 1% labour cess 20434.14
Cost for 120 cum = a+b+c+d+e+f 2063848.07
Rate per cum = (a+b+c+d+e+f)/120 17198.73
Add 12% GST 2063.85
Rate per Cum 19262.58
say 19263.00
4.1F (iii) (q) Height 5m to 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 46 per cent 46.00 571202.24
of (a+b+c)
e) Overhead charges @ 10 % on 181294.62
(a+b+c+d)
f) Contractor's profit @ 10 % on 199424.09
(a+b+c+d+e)
2193664.95
Add 1% labour cess 21936.65
Cost for 120 cum = a+b+c+d+e+f 2215601.60
Rate per cum = (a+b+c+d+e+f)/120 18463.35
Add 12% GST 2215.60
Rate per Cum 20678.95
say 20679.00
4.1F (iii) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1241744.00
(a+b+c) for 120 cum
d) Formwork and staging 56 per cent 56.00 695376.64
of (a+b+c)
e) Overhead charges @ 10 % on 193712.06
(a+b+c+d)
f) Contractor's profit @ 10 % on 213083.27
(a+b+c+d+e)
2343915.97
Add 1% labour cess 23439.16
Cost for 120 cum = a+b+c+d+e+f 2367355.13
Rate per cum = (a+b+c+d+e+f)/120 19727.96
Add 12% GST 2367.36
Rate per Cum 22095.31
say 22095.00
4.1 G PSC Grade M-50
Unit = 1 cum
Taking output = 120 cum
a) Material
Cement tonne 58.80 6875.00 404250.00
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
289
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture @ 0.4 per cent of cement kg 235.20 160.00 37632.00
b) Labour
Mate day 0.94 350.00 329.00
Mason day 3.50 505.17 1768.08
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
290
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 201654.10
(a+b+c+d+e)
2218195.05
Add 1% labour cess 22181.95
Cost for 120 cum = a+b+c+d+e+f 2240377.00
Rate per cum = (a+b+c+d+e+f)/120 18669.81
Add 12% GST 2240.38
Rate per Cum 20910.19
say 20910.00
4.1G (i) (r) Height above 10m
Basic Cost of Labour, Material & Machinery 1264289.00
(a+b+c) for 120 cum
d) Formwork and staging 55 per cent 55.00 695358.95
of (a+b+c)
e) Overhead charges @ 10 % on 195964.80
(a+b+c+d)
f) Contractor's profit @ 10 % on 215561.27
(a+b+c+d+e)
2371174.02
Add 1% labour cess 23711.74
Cost for 120 cum = a+b+c+d+e+f 2394885.76
Rate per cum = (a+b+c+d+e+f)/120 19957.38
Add 12% GST 2394.89
Rate per Cum 22352.27
say 22352.00
4.1 H PSC Grade M- 55
Unit = 1 cum
Taking output = 120 cum
a) Material
Cement tonne 63.50 6875.00 436562.50
Coarse sand cum 54.00 1214.00 65556.00
20 mm Aggregate cum 64.80 1298.00 84110.40
10 mm Aggregate cum 43.20 1298.00 56073.60
Admixture @ 0.4 per cent of cement kg 254.00 160.00 40640.00
b) Labour
Mate day 0.94 350.00 329.00
Mason day 3.50 505.17 1768.08
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Batching Plant @ 20 cum/hour hour 6.00 14488.00 86928.00
Generator 100 KVA hour 6.00 1160.00 6960.00
Loader hour 6.00 1321.00 7926.00
Transit Mixer ( capacity 4.0 cu.m )
Transit Mixer 4 cum capacity lead upto1 hour 15.00 1601.00 24015.00
Km
291
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Lead beyond 1 Km, L - lead in Kilometer tonne.km 300L 1601.00 480300.00
292
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
f) Contractor's profit @ 10 % on 221583.33
(a+b+c+d+e)
2437416.68
Add 1% labour cess 24374.17
Cost for 120 cum = a+b+c+d+e+f 2461790.85
Rate per cum = (a+b+c+d+e+f)/120 20514.92
Add 12% GST 2461.79
Rate per Cum 22976.71
say 22977.00
Note 1.Where ever concrete is carried out using
batching plant, transit mixer, concrete pump,
admixers conforming IS: 9103 @ 0.4 per cent
of weight of cement may be added for
achieving desired slump of concrete.
2. Cement provided for various components
of the super structure is for estimating
purpose only. Actual quantity of cement will
be as per approved mix design. Similarly, the
provision for coarse and fine aggregates is for
estimating purpose and the exact quantity
shall be as per the mix design.
3. The items like needle and surface vibrators
are part of minor T & P which is already
covered under the overhead charges. As
such these items have not been added
separately in the rate analysis.
4.2 1600 Supplying, fitting and placing HYSD bar
reinforcement in super-structure complete
as per drawing and technical
specifications
Unit = 1 MT
Taking output = 1 MT
a) Material
HYSD bars including 5 per cent for laps tonne 1.05 59875.00 62868.75
and wastage
Binding wire Kg 8.00 80.00 640.00
b) Labour for cutting, bending, tying
and placing in position
Mate day 0.44 350.00 154.00
Blacksmith day 3.00 505.17 1515.50
Mazdoor day 8.00 350.00 2800.00
Basic Cost of Labour & Material (a+b) 67979.00
293
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 12% GST 9969.15
Rate per Cum 93045.37
say 93045.00
4.3 1800 High tensile steel wires/strands including
all accessories for stressing, stressing
operations and grouting complete as per
drawing and Technical Specifications
Unit = 1 MT
Taking output = 0.377 MT
Details of cost for 12T13 strand 40 m long
cable (weight = 0.377 MT)
a) Material
H.T. Strand @ 9.42 kg/m including 2 per tonne 0.39 138583.00 53354.46
cent for wastage and extra length for
jacking
Sheathing duct ID 66 mm along with 5 metre 42.00 245.00 10290.00
per cent extra length 40 x 1.05 = 42 m.
Tube anchorage set complete with each 2.00 481.00 962.00
bearing plate, permanent wedges etc
Cement for grouting including 3 per cent tonne 0.125 6875.00 859.38
wastage @ 3.00 kg/m = 3 x 1.03 x 40 =
123.60 kg (say, = 125 kg)
Add 0.50 per cent cost of material for 3273.29
Spacers, Insulation tape and
miscellaneous items
b) Labour
i) For making and fixing cables,
anchorages
Mate day 0.16 350.00 56.00
Blacksmith day 1.00 505.17 505.17
Mazdoor day 3.00 350.00 1050.00
ii) For prestressing
Mate/Supervisor day 0.05 350.00 17.50
Prestressing operator / Fitter day 0.25 403.67 100.92
Mazdoor day 1.00 350.00 350.00
iii) For grouting
Mate/Supervisor day 0.05 350.00 17.50
Mason day 0.25 505.17 126.29
Mazdoor day 1.00 350.00 350.00
c) Machinery
Stressing jack with pump hour 2.50 328.00 820.00
Grouting pump with agitator hour 1.00 682.00 682.00
Generator 33 KVA. hour 3.50 630.00 2205.00
d) Overhead charges @ 10 % on 628.04
(a+b+c)
e) Contractor's profit @ 10 % on 690.84
(a+b+c+d)
294
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
76338.38
Add 1% labour cess 763.38
Cost for 0.377 MT (a+b+c+d+e) 77101.76
Rate per MT = (a+b+c+d+e)/0.377 204513.95
Add 12% GST 24541.67
Rate per Cum 229055.62
say 229056.00
Note Cost of HT steel has been taken for delivery
at site. Hence carriage has not been
considered.
4.4 2702 Providing and laying Cement concrete
wearing coat M-30 grade including
reinforcement complete as per drawing
and Technical Specifications
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concrete M30 Grade Refer cum 1.00 9650.00 9650.00
relevant item of concrete in Item 14.1
excluding formwork
HYSD bar reinforcement Rate as per tonne 0.075 67979.00 5098.43
item No 14.2(Excluding OH & CP)
b) Labour
Mazdoor for cleaning deck slab concrete day 0.15 350.00 52.50
surface.
c) Overhead charges @ 10 % on (a+b) 1480.09
295
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Providing and laying 12 mm thick mastic
asphalt wearing course on top of deck
slab excluding prime coat with paving
grade bitumen meeting the requirements
given in table 500-29, prepared by using
mastic cooker and laid to required level
and slope after cleaning the surface,
including providing antiskid surface with
bitumen precoated fine grained hard
stone chipping of 9.5 mm nominal size at
the rate of 0.005cum per 10 sqm and at an
approximate spacing of 10 cm center to
center in both directions, pressed into
surface when the temperature of surfaces
not less than 100 deg. C, protruding 1 mm
to 4 mm over mastic surface, all complete
as per clause 515.
Unit = sqm
Taking output = 72.46 sqm (2
tonnes)(0.869 cum) assuming a density of
2.3 tonnes/cum.
a) Labour
Mate day 0.49 350.00 171.50
Mazdoor day 11.00 350.00 3850.00
Mazdoor (Skilled) day 1.25 350.00 437.50
b) Machinery
Mechanical broom @ 1250 sqm per hour hour 0.06 528.00 31.68
296
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
iii) Lime stone dust filler with calcium tonne 0.36 7725.00 2781.00
carbonate content not less than 80
per cent by weight @ 17.92 per cent
by weight of mix = 2 x 17.92/100 = 0.36
297
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4.6 2703, 1500, Construction of precast RCC railing of
1600 & 1700 M30 Grade, aggregate size not exceeding
12 mm, true to line and grade, tolerance of
vertical RCC post not to exceed 1 in 500,
centre to centre spacing between vertical
post not to exceed 2000 mm, leaving
adequate space between vertical post for
expansion, complete as per approved
drawings and technical specifications.
Unit = 1 RM
Taking output = 2 x 24 m span = 48 m
a) Material
Cement concreteM30 Grade Refer cum 4.09 9650.00 39487.80
relevant item of concrete in Item 14.1(C)
by using batching plant, excluding
formwork i.e. per cum basic cost (a+b+c)
298
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
4.7 2703, 1500, Construction of RCC railing of M30 Grade
1600 & 1700 in-situ with 20 mm nominal size
aggregate, true to line and grade,
tolerance of vertical RCC post not to
exceed 1 in 500, centre to centre spacing
between vertical post not to exceed 2000
mm, leaving adequate space between
vertical post for expansion, complete as
per approved drawings and technical
specifications.
Unit = 1 RM
Taking output = 2 x 24 m span = 48 m.
a) Material
Cement concreteM30 Grade Refer cum 4.092 9650.00 39487.80
relevant item of concrete in Item 14.1(C)
by using batching plant, excluding
formwork i.e. per cum basic cost (a+b+c)
299
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Unit = 1 RM
Taking output = 2 x 50 m span = 100 m
a) Material:
1) ISMC 100 = 2.806 x 1.05 = 2.946 MT tonne 2.95 55110.00 162354.06
300
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mate day 0.02 350.00 7.00
Skilled (Blacksmith, welder etc.) day 0.02 505.17 10.10
Mazdoor day 0.02 350.00 7.00
For fixing in position
Mate day 0.01 350.00 3.50
Mason day 0.01 505.17 5.05
Mazdoor day 0.20 350.00 70.00
Add @ 5 per cent of cost of material and 101.33
labour for electrodes, cutting gas,
sealant, anti-corrosive bituminous paint,
mild steel grating etc.
c) Overhead charges @ 10 % on (a+b) 212.80
d) Contractor's profit @ 10 % on 234.08
(a+b+c)
2574.87
Add 1% labour cess 25.75
Rate per metre (a+b+c+d) 2600.61
Add 12% GST 312.07
Rate per m 2912.69
say 2913.00
Note 1. In case of viaducts in urban areas, the
drainage spouts should be connected
with suitably located pipelines to
discharge the surface run-off to drains
provided at ground level.
2. In case of bridges, sufficient length of
G.I Pipe shall be provided to ensure that
there is no splashing of water from the
drainage spout on the structure.
4.10 2700 PCC M15 Grade leveling course below
approach slab complete as per drawing
and Technical specification
Unit = 1 cum
Taking output = 1 cum
Material
Concrete, Rate as per item No. 12.8 (A) cum 1.00 5271.00 5271.00
excluding formworks
Rate per cum say 5271.00
4.11 1500,1600,1 Reinforced cement concrete approach
700 & 2704 slab including reinforcement and
formwork complete as per drawing and
Technical specification
Unit = 1 cum
Taking output = 1 cum
a) Material
301
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cement concreteM30 Grade Refer cum 1.00 9641.00 9641.00
relevant item of concrete in item
12.8(G)by using batching plant,
excluding formwork i.e. per cum basic
cost (a+b+c) (Excluding OH & CP)
( Refer relevant item of concrete in item 192.82
No. 13.8 (G) except that form work may
be added at the rate of 2 per cent of
cost against 3.5 per cent provided in the
foundation concrete.
HYSD bar reinforcement Rate as per tonne 0.05 67979.00 3398.95
item No 14.2(Excluding OH & CP)
b) Overhead charges @ 10 % on (a) 1323.28
c) Contractor's profit @ 10 % on(a+b) 1455.60
16011.65
Add 1% labour cess 160.12
Rate per cum (a+b+c) 16171.77
Add 12% GST 1940.61
Rate per cum 18112.38
say 18112.00
Note The grade of reinforced cement concrete may
be adopted as M30 for severe conditions and
M25 for moderate conditions.
302
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
a) Material
Cement tonne 0.47 6875.00 3231.25
Coarse sand cum 0.45 1214.00 546.30
20 mm Aggregate cum 0.54 1298.00 700.92
10 mm Aggregate cum 0.36 1298.00 467.28
Admixture @ 0.4 per cent of cement Kg 1.88 160.00 300.80
b) Labour
(i) Cutting, bending, making reinforcement
cage, placing in position, binding etc.
complete
Taking quantity of steel 100 Kg/cum of
concrete including laps and wastage
Mate day 0.06 350.00 21.00
Mazdoor (Skilled) day 0.35 350.00 122.50
Mazdoor day 1.40 350.00 490.00
(ii) Cable cutting and threading in position
including binding by insulation tape with
HDPE pipes etc., prestessing and cutting
of extra length of HT strand after de-
stressing.
Taking quantity of HT strand 60 Kg/cum
Mate day 0.02 350.00 7.00
Mazdoor (Skilled) day 0.14 350.00 49.00
Mazdoor day 0.50 350.00 175.00
(iii) Erection and dismantling of shuttering
303
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mate day 0.01 350.00 3.50
Mazdoor day 0.35 350.00 122.50
(vi) Handling of precast girder, stacking in
stockyard and again loading in trailor
304
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Taking output = 1 RM
a) Material
Helical pipes 600mm diameter metre 1.00 7000.00 7000.00
Tie rods 20mm diameter each 1.00 120.00 120.00
Consumables for sealing joints etc.@ 5 per 356.00
cent of cost of material
b) Labour
Mate day 0.01 350.00 3.50
Fitter day 0.05 403.67 20.18
Mazdoor day 0.20 350.00 70.00
c) Overhead charges @ 10 % on (a+b) 756.97
d) Contractor's profit @ 10 % on 832.67
(a+b+c)
9159.32
Add 1% labour cess 91.59
Rate per cum (a+b+c+d) 9250.91
Add 12% GST 1110.11
Rate per cum 10361.02
say 10361.00
4.15 800 Crash Barriers
The rate analysis for rigid crash barrier in
reinforced cement concrete, semi-rigid crash
barrier with metal beam and flexible crash
barrier with wire ropes have been made and
included in chapter-8 on Traffic and
Transportation.
4.16 800 Painting on concrete surface
Providing and applying 2 coats of water
based cement paint to unplastered
concrete surface after cleaning the
surface of dirt, dust, oil, grease,
efflorescence and applying paint @ of 1
litre for 2 sqm.
Unit = sqm
Taking output = 10 sqm
a) Labour
Mate day 0.01 350.00 3.50
Painter day 0.25 403.67 100.92
Mazdoor (Skilled) day 0.25 350.00 87.50
b) Material
Water based paint of approved quality for Litres 5.00 410.00 2050.00
cement concrete surface
c) Overhead charges @ 10 % on (a+b) 224.19
305
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 27.13
Cost for 10 sqm (a+b+c+d) 2739.85
Rate per sqm (a+b+c+d)/10 273.98
Add 12% GST 32.88
Rate per sqm 306.86
say 307.00
4.17 2604 Burried Joint
Providing and laying a burried expansion
joint, expansion gap being 20 mm,
covered with 12 mm thick, 200 mm wide
galvanised weldable structural steel plate
as per IS: 2062, placed symmetrical to
centre line of the joint, resting freely over
the top surface of the deck concrete,
welding of 8 mm dia. 100 mm long
galvanised nails spaced 300 mm c/c along
the centre line of the plate, all as specified
in clause 2604.
Unit = Running meter
Taking output = 12 m
a) Labour
Mate day 0.02 350.00 7.00
Mazdoor day 0.40 350.00 140.00
Mazdoor (Skilled) day 0.20 350.00 70.00
b) Material
Galvanised M.S plate 200 mm wide,12 kg 237.50 110.00 26125.00
mm thick @ 94.20 kg/sqm including 5
per cent wastage
Add 1 per cent of cost of steel plate 261.25
cutting, welding consumables and
galvanised nails.
c) Overhead charges @ 10 % on (a+b) 2660.33
d) Contractor's profit @ 10 % on 2926.36
(a+b+c)
32189.93
Add 1% labour cess 321.90
Cost for 12 m = (a+b+c+d) 32511.83
Rate per m = (a+b+c+d)/12 2709.32
Add 12% GST 325.12
Rate per m 3034.44
say 3034.00
Note Guidelines laid down vide the MoRTH circular
No. RW/NH-34059/1/96-S&R dated
30.11.2000 and subsequent corrigendum
dated 25.01.2001 may be reffered for
expansion joints.
4.18 2605 Filler joint
306
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
(i) Providing & fixing 2 mm thick corrugated
copper plate in expansion joint complete
as per drawing & Technical Specification.
307
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 19.03
Cost for 12 m = (a+b+c+d) 1922.12
Rate per m = (a+b+c+d)/12 160.18
Add 12% GST 19.22
Rate per m 179.40
say 179.00
4.18 (iii) Providing and fixing in position 20 mm
thick premoulded joint filler in expansion
joint for fixed ends of simply supported
spans not exceeding 10 m to cater for a
horizontal movement upto 20 mm,
covered with sealant complete as per
drawing and technical specifications.
308
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Volume 12 x 0.1 x 0.01 = 0.012 cum
Weight 0.012 x 1400 = 16.8kg
Bitumen t 0.001 40159.00 40.16
16.8 x 0.06 = 1 kg
c) Overhead charges @ 10 % on (a+b) 27.10
309
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
2.4 Galvanised structural steel plate 200 mm kg 113.00 110.00 12430.00
wide,6 mm thick, 12 m long (2.4 sqm) @
47.10 kg/sqm including 5 per cent
wastage
Add 1 per cent for welding and foam 186.02
caulking/backer rod and other
incidentals.
c) Machinery
Mastic cooker 1 tonne capacity hour 1.00 109.00 109.00
Smooth 3-wheeled steel roller 8-10 hour 0.50 1432.00 716.00
capacity
d) Overhead charges @ 10 % on 1961.29
(a+b+c)
e) Contractor's profit @ 10 % on 2157.42
(a+b+c+d)
23731.57
Add 1% labour cess 237.32
Cost for 12 m asphalt plug joint = 23968.89
(a+b+c+d+e)
Rate per m = (a+b+c+d+e)/12 1997.41
Add 12% GST 239.69
Rate per m 2237.10
say 2237.00
Note The nominal size of aggregates shall be 12.5
mm for depth of joint upto 75 mm and 20 mm
for joints of depth more than 75 mm.
4.20 2606 Elastomeric Slab Steel Expansion Joint
Providing and laying of an elastomeric
slab steel expansion joint, catering to
right or skew (less than 20 deg.,
moderately curved with maximum
horizontal movement upto 50 mm,
complete as per approved drawings and
standard specifications to be installed by
the manufacturer/supplier or their
authorised representative ensuring
compliance to the manufacturer's
instructions for installation and clause
2606 of MoRTH specifications for road &
bridge works.
Unit = Running meter
Taking output = 12 m
a) Labour
Mate day 0.06 350.00 21.00
Mazdoor day 1.00 350.00 350.00
Mazdoor (Skilled) day 0.50 350.00 175.00
b) Material
310
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Supply of elastomeric slab seal metre 12.00 8500.00 102000.00
expansion joint assembly manufactured
by using chloroprene, elastomer for
elastomeric slab unit conforming to
clause 915.1 of IRC: 83 (part II),
complete as per approved drawings and
standard specification conforming to
clause 2606 of MoRT&H Specification
311
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Preformed continuous chloroprene metre 12.00 19300.00 231600.00
elastomer or closed cell foam sealing
element with high tear strength,
vulcanised in a single operation for the
full length of a joint to ensure water
tightness.
Add 1 per cent of cost of sealing 2316.00
element for lubricant-cum-adhesive and
other consumables.
c) Overhead charges @ 10 % on (a+b) 28577.30
d) Contractor's profit @ 10 % on 31435.03
(a+b+c)
345785.31
Add 1% labour cess 3457.85
Cost for 12 m = (a+b+c+d) 349243.16
Rate per m = (a+b+c+d)/12 29103.60
Add 12% GST 3492.43
Rate per m 32596.03
say 32596.00
Note 1. The installation shall be done by the
manufacturer or his authorised
representative to the satisfaction of the
Engineer.
2. The concreting for joining the
expansion joint assembly with the deck
has not been included in this analysis as
the same is catered in the quantities of
RCC deck.
3. The anchoring bars of the expansion
joint assembly shall be welded to the main
reinforcement of the deck.
4.22 2607 Strip Seal Expansion Joint
Providing and laying of a strip seal
expansion joint catering to maximum
horizontal movement upto 70 mm,
complete as per approved drawings and
standard specifications to be installed by
the manufacturer/supplier or their
authorised representative ensuring
compliance to the manufacturer's
instructions for installation.
Unit = Running meter
Taking output = 12 m
a) Labour
Mate day 0.05 350.00 17.50
Mazdoor day 1.00 350.00 350.00
Mazdoor (Skilled) day 0.25 350.00 87.50
b) Material
312
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Supply of complete assembly of strip metre 12.00 22000.00 264000.00
seal expansion joint comprising of edge
beams, anchorage, strip seal element
and complete accessories as per
approved specifications and drawings.
313
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Supply of a modular strip/box seal joint metre 12.00 25000.00 300000.00
assembly comprising of edge beams,
central beam,2 modules chloroprene
seal, anchorage elements, support and
control system, all steel sections
protected against corrosion and installed
by the manufacturer or his authorised
representative.
c) Overhead charges @ 10 % on (a+b) 30050.96
314
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Supply of a modular box / box seal joint metre 12.00 30000.00 360000.00
assembly containing 3 modules / cells and
comprising of edge beams, two central
beams, chloroprene seal, anchorage
elements, support and control system, all
steel sections protected against corrosion
and installed by the manufacturer or his
authorised representative.
c) Overhead charges @ 10 % on (a+b) 36063.70
d) Contractor's profit @ 10 % on 39670.07
(a+b+c)
436370.77
Add 1% labour cess 4363.71
Cost for 12 m Modular strip/box seal joint = 440734.48
(a+b+c+d)
Rate per m = (a+b+c+d)/12 36727.87
Add 12% GST 4407.34
Rate per m 41135.22
say 41135.00
Note 1. The installation shall be done by the
manufacturer or his authorised
representative to the satisfaction of the
Engineer.
2. The concreting for joining the
expansion joint assembly with the deck
has not been included in this analysis as
the same is catered in the quantities of
RCC deck.
3. The anchoring bars of the expansion
joint assembly shall be welded to the main
reinforcement of the deck.
315
Chapter-5:
316
CHAPTER - 5
RIVER TRAINING AND PROTECTION WORKS
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
5.1 2503 Providing and laying boulders apron on river
bed for protection against scour with stone
boulders weighing not less than 40 kg each
complete as per drawing and Technical
specification.
A Boulder Laid Dry Without Wire Crates.
Unit = cum
Taking output = 1 cum
a) Material
Stone cum 1.00 700.00 700.00
Stone Spalls cum 0.20 700.00 140.00
b) Labour
Mate day 0.04 350.00 14.00
Mason day 0.35 505.17 176.81
Mazdoor * day 0.75 350.00 262.50
c) Overhead charges @ 10 % on (a+b) 129.33
d) Contractor's profit @ 10 % on (a+b+c) 142.26
1564.90
Add 1% labour cess 15.65
Rate per cum = (a+b+c+d) 1580.55
Add 12% GST 189.67
Rate per cum 1770.22
say 1770.00
* Including excavation for trimming for preparation
of bed.
Note Nominal excavation required for preparation of
bed has been taken into account while making
provision for labour.
5.2 2503 Boulder Apron Laid in Wire Crates
Providing and laying of boulder apron laid in wire
crates made with 4mm dia GI wire conforming to
IS: 280 & IS:4826 in 100mm x 100mm mesh
(weaved diagonally) including 10 per cent extra
for laps and joints laid with stone boulders
weighing not less than 40 kg each.
Unit = cum
Taking output = 3 mx1.5mx1.25m = 5.63 cum
a) Material
4mm GI wire crates woven in mesh size of sqm 22.00 190.00 4180.00
100 mm x 100 mm.
Stone cum 5.63 700.00 3941.00
Stone Spalls cum 1.13 700.00 791.00
b) Labour
Mate day 0.18 350.00 63.00
317
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mazdoor (Skilled) day 1.50 350.00 525.00
Mazdoor day *3.00 350.00 1050.0
c) Overhead charges @ 10 % on (a+b) 1055.0
d) Contractor's profit @ 10 % on (a+b+c) 1160.50
12765.50
Add 1% labour cess 127.66
Cost for 5.63 cum = a+b+c+d 12893.16
Rate per cum = (a+b+c+d)/5.63 2290.08
Add 12% GST 274.81
Rate per cum 2564.89
say 2565.00
* Including excavation for trimming for preparation
of bed.
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case
readymade rolls are not available, GI wire 4mm
dia. @ 32 kg per 10 sqm may be provided. In
that case 2 per cent of the cost of GI wire may
be added for weaving the wire crates.
318
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mate day 0.04 350.00 14.00
Mason day 0.35 505.17 176.81
Mazdoor day 0.75 350.00 262.50
c) Overhead charges @ 10 % on (a+b) 129.33
d) Contractor's profit @ 10 % on (a+b+c) 142.26
1564.90
Add 1% labour cess 15.65
Rate per cum = (a+b+c+d) 1580.55
Add 12% GST 189.67
Rate per cum 1770.22
say 1770.00
5.4 B Cement Concrete Blocks of size 0.3x0.3 x0.3
m cast in cement concrete of Grade M15
Unit = cum
Taking output = 1 cum
Concrete Grade M15 Rate as per item No. cum 1.00 5481.00 5481.00
12.8 (A)
Add 2 per cent of cost to account for 109.62
nominal surface reinforcement and filling of
granular material in recesses between
blocks.
Rate per cum 5590.62
say 5591.00
5.5 2504 Providing and laying Filter material
underneath pitching in slopes complete as
per drawing and Technical specification
Unit = cum
Taking output = 1 cum
a) Material
Graded stone aggregate of required size cum 1.20 600.00 720.00
b) Labour
Mate day 0.05 350.00 17.50
Mazdoor (Skilled) day 0.25 350.00 87.50
Mazdoor * day 1.00 350.00 350.00
c) Overhead charges @ 10 % on (a+b) 117.50
d) Contractor's profit @ 10 % on (a+b+c) 129.25
1421.75
Add 1% labour cess 14.22
Rate per cum = (a+b+c+d) 1435.97
Add 12% GST 172.32
Rate per cum 1608.28
say 1608.00
Includes Mazdoor required for trimming of slope
to proper profile and preparation of bed.
5.6 700 & 2504 Geotextile Filter
319
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Laying of a geotextile filter between pitching and
embankment slopes on which pitching is laid to
prevent escape of the embankment material
through the voids of the stone pitching/cement
concrete blocks as well as to allow free
movement of water without creating any uplift
head on the pitching.
Unit = sqm
Taking output = 10 sqm.
a) Labour
Mate day 0.02 350.00 7.00
Mazdoor day 0.30 350.00 105.00
Mazdoor (Skilled) day 0.10 350.00 35.00
b) Material
Permeable synthetic geotextile including 5 sqm 11.00 180.00 1980.00
per cent for overlap and wastage
c) Overhead charges @ 10 % on (a+b) 212.70
d) Contractor's profit @ 10 % on (a+b+c) 233.97
2573.67
Add 1% labour cess 25.74
Cost for 10 sqm = a+b+c+d 2599.41
Rate per sqm = (a+b+c+d)/10 259.94
Add 12% GST 31.19
Rate per sqm 291.13
say 291.00
5.7 2504.4 Toe protection
A toe wall for toe protection can either be in dry
rubble masonry in case of dry rubble pitching or
pitching with stones in wire crates or it can be in
PCC M15 nominal mix if cement concert block
have been used for pitching . Rates for toe wall
can be adopted from respective clauses
depending upon approved design. The rate for
excavation for foundation, dry rubble masonry
and PCC M15 have been analysed and given in
respective chapters.
320
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Add for cement concrete bedding (M15 cum 0.33 4356.00 1437.48
Nominal mix) vide Item 12.8 (A) excluding OH
& CP . Quantity shall be adopted as per
design ( Assume Rubble stone Flooring
thickness 300mm and cement concrete
bedding thickness 100mm)
5475.74
Add 1% labour cess 54.76
Rate per cum = (a+b+c+d+e+f) 5530.50
Add 12% GST 663.66
Rate per cum 6194.15
say 6194.00
* Includes cement mortar for laying and filling of
joints.
5.8 B Cement Concrete blocks Grade M15
Concrete Grade M15 block. (Rate as per item cum 1.00 5481.00 5481.00
No. 12.8 (A) including OH & CP.
Add for cement concrete bedding (M15 Nominal cum 0.33 5481.00 1808.73
mix) vide Item 12.8 (A) including OH & CP.
Quantity shall be adopted as per design (
Assume Cement Concrete blocks thickness
300mm and cement concrete bedding thickness
100mm)
Add 1 per cent of cost to account for excavation 72.90
for preparation of bed.
Rate per cum 7362.63
say 7363.00
5.9 2506 Dry Rubble Flooring
Construction of dry rubble flooring at cross
drainage works for relatively less important
works.
Unit = cum
Taking output = 1 cum
a) Material
Stone cum 1.00 700.00 700.00
Stone Spalls cum 0.20 700.00 140.00
321
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Labour
Mate day 0.10 350.00 35.00
Mason day 0.50 505.17 252.58
mazdoor day 1.50 350.00 525.00
Add 1 per cent of (b) for trimming and 8.13
preparation of base.
c) Overhead charges @ 10 % on (a+b) 166.07
d) Contractor's profit @ 10 % on (a+b+c) 182.68
2009.46
Add 1% labour cess 20.09
Rate per cum = (a+b+c+d) 2029.55
Add 12% GST 243.55
Rate per cum 2273.10
say 2273.00
5.10 2507.2 Curtain wall complete as per drawing and
Technical specification
A Stone masonry in cement mortar (1:3)
Coursed rubble masonry (1st sort) cum 1.00 5600.00 5600.00
Rate same as per item No. 12.7 (A) including
OH & CP
Rate per cum say 5600.00
or
5.10 B Cement concrete Grade M15
Concrete Grade M15 Rate as per item No. cum 1.00 5481.00 5481.00
12.8 (A) including OH & CP
Rate per cum say 5481.00
Note Other items like excavation for foundation, filling
behind wall, filter media, weep holes etc. shall
be added separately as per approved design.
1630.03
322
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 1% labour cess 16.30
Rate per cum = (a+b+c+d) 1646.33
Add 12% GST 197.56
Rate per cum 1843.89
say 1844.00
5.12 2503.3 Gabian Structure for Retaining Earth
Providing and construction of a gabian structure
for retaining earth with segments of wire crates
of size 7 m x 3 m x 0.6 m each divided into 1.5
m compartments by cross netting, made from 4
mm galvanised steel wire @ 32 kg per 10 sqm
having minimum tensile strength of 300 Mpa
conforming to IS:280 and galvanizing coating
conforming to IS:4826, woven into mesh with
double twist, mesh size not exceeding 100 x 100
mm, filled with boulders with least dimension of
200 mm, all loose ends to be tied with 4 mm
galvanised steel wire
Unit = cum
Taking output = 7 x 3 x 0.6 = 12.60 cum
a) Labour
Mate day 0.28 350.00 98.00
Mazdoor day 5.00 350.00 1750.00
Mazdoor (Skilled) day 2.00 350.00 700.00
b) Material
Galvanised steel wire crates of mesh size sqm 61.00 190.00 11590.00
100 mm x 100 mm woven with 4mm dia. GI
wire in rolls of required size.
Stone boulders with least dimension of 200 cum 12.60 700.00 8820.00
mm
Stone spalls of minimum size 25 mm cum 2.52 700.00 1764.00
c) Overhead charges @ 10 % on (a+b) 2472.20
d) Contractor's profit @ 10 % on (a+b+c) 2719.42
29913.62
Add 1% labour cess 299.14
Cost for 12.60 cum (a+b+c+d) 30212.76
Rate per cum (a+b+c+d)/12.60 2397.84
Add 12% GST 287.74
Rate per cum 2685.58
say 2686.00
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case
readymade rolls are not available, GI wire 4mm
dia. @ 32 kg per 10 sqm may be provided. In
that case 2 per cent of the cost of GI wire may
be added for weaving the wire crates.
323
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
5.13 2503.3 Gabian Structure for Erosion Control, River
Training Works and Protection works
22583.44
Add 1% labour cess 225.83
Cost for 6.00 cum (a+b+c+d) 22809.27
Rate per cum (a+b+c+d) / 6.00 3801.55
Add 12% GST 456.19
Rate per cum 4257.73
say 4258.00
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case
readymade rolls are not available, GI wire 4mm
dia. @ 32 kg per 10 sqm may be provided. In
that case 2 per cent of the cost of GI wire may
be added for weaving the wire crates.
324
Chapter-6:
R epairand R ehabilitation
P ream ble:
1. R em ovalof cem ent concrete w earing coat and asphaltic w earing coat hasbeen proposed
w ith pneumatic breakers.
2. T he rate forexternalpre-stressing hasbeen analysed forthree different spansof25,50 and
100 m .
3. S ealing ofcrackshasbeen proposed w ith cem ent grout,cem ent m ortar(1 :1)grout and epoxy
grout by injecting w ith grout pump through nipples.
4. Bonding ofnew concrete w ith old concrete isproposed w ith epoxy resin.
5. T he repairand replacem ent offollow ing structureshasbeen included:
A ) Bridge bearings
B) Expansion Joints
C) Concrete R ailing
D) M ild steelrailing
E) Crash barrier.
325
CHAPTER - 6
REPAIR AND REHABILITATION
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
6.1 2809 Removal of existing cement concrete wearing coat
including its disposal complete as per Technical
Specification without causing any detrimental effect to
any part of the bridge structure and removal of
dismantled material with all lifts and lead upto 1000 m
Unit = Sq m ( Thickness 75 mm)
Taking output = 10 sqm
a) Labour
Mate day 0.06 350.00 21.00
Mazdoor day 1.00 350.00 350.00
b) Machinery
Air Compressor 250 cfm with pneumatic breaker/jack hour 1.00 488.00 488.00
hammer along with accessories.
Tractor-trolley. hour 0.50 581.00 290.50
c) Overhead charges @ 10 % on (a+b) 114.95
d) Contractor's profit @ 10 % on (a+b+c) 126.45
1390.90
Add 1% labour cess 13.91
Cost for 10 sqm = (a+d+c+d) 1390.90
Rate per sqm = (a+b+c+d)/10 139.09
Add 12% GST 16.69
Rate per sqm 155.78
say 156.00
6.2 2809 Removal of existing asphaltic wearing coat comprising
of 50 mm thick asphaltic concert laid over 12 mm thick
mastic asphalt including disposal with all lift and lead
upto 1000 m.
Unit = Sq m
Taking output = 10 sqm
a) Labour
Mate day 0.03 350.00 10.50
Mazdoor day 0.75 350.00 262.50
b) Machinery
Air Compressor 250 cfm with pneumatic breaker. hour 0.75 488.00 366.00
Tractor-trolley. hour 0.40 581.00 232.40
c) Overhead charges @ 10 % on (a+b) 87.14
d) Contractor's profit @ 10 % on (a+b+c) 95.85
1054.39
Add 1% labour cess 10.54
Cost for 10 sqm = (a+d+c+d) 1064.94
Rate per sqm = (a+b+c+d)/10 106.49
Add 12% GST 12.78
Rate per sqm 119.27
say 119.00
6.3 2807 Guniting concrete surface with cement mortar applied
with compressor after cleaning surface and spraying
with epoxy complete as per Technical Specification
Unit = Sq m
Taking output = 1 sqm
Assuming thickness 25 mm
a) Material
326
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cement kg 16.00 6.88 110.00
Graded sand cum 0.04 1156.00 46.24
Wire mesh 50mm x 50mm size of 3mm wire kg 2.00 155.00 310.00
Epoxy kg 0.67 17.00 11.39
Accelerator compound for guniting @ 4 per cent of kg 0.64 160.00 102.40
weight of cement
Add 2 per cent of cost of material for miscellaneous 11.60
consumables like nozzles, wire brush, cotton waste etc.
b) Labour
Mate day 0.01 350.00 3.50
Mason day 0.04 505.17 20.21
Mazdoor day 0.14 350.00 49.00
c) Machinery
Compressor with guniting equipment along with hour 0.10 488.00 48.80
accessories
d) Overhead charges @ 10 % on (a+b+c) 71.31
e) Contractor's profit @ 10 % on (a+b+c+d) 78.45
862.90
Add 1% labour cess 8.63
Rate per sqm = (a+b+c+d+e) 871.53
Add 12% GST 104.58
Rate per sqm 976.11
say 976.00
6.4 2800 Providing and inserting nipples with approved fixing
compound after drilling holes for grouting as per
Technical Specifications including subsequent
cutting/removal and sealing of the hole as necessary of
nipples after completion of grouting with Cement/Epoxy
Unit = Number
Taking output = 1 No.
a) Material
Nipples each 1.00 155.00 155.00
Cement, fixing compound and consumables @ 15 per 23.25
cent of cost of nipple
b) Labour
Mate day 0.01 350.00 3.50
Mazdoor (Skilled) labour for drilling day 0.08 350.00 28.00
Mazdoor (Skilled) labour for fixing nipple and sealing day 0.08 350.00 28.00
inlets
Mazdoor for cutting and removing of nipples day 0.04 350.00 14.00
Add 10 per cent of labour cost for drilling holes etc 7.35
c) Overhead charges @ 10 % on (a+b) 25.91
d) Contractor's profit @ 10 % on (a+b+c) 28.50
313.51
Add 1% labour cess 3.14
Rate per No. = (a+b+c+d) 316.65
Add 12% GST 38.00
Rate per No. 354.64
say 355.00
6.5 2806 Sealing of cracks/porous concrete by injection process
through nipples/Grouting complete as per Technical
Specification.
A Cement Grout
327
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Unit = kg
Taking output = 1 kg
a) Material
Cement including 10 per cent wastage kg 1.10 6.88 7.56
Admixtures (anti shrinkage compound) @ 20 per cent 1.51
of cost of cement
b) Labour
Mate day 0.08 350.00 28.00
Mazdoor (Skilled) day 0.10 350.00 35.00
Mazdoor day 0.10 350.00 35.00
c) Machinery
Grout pump with agitator and accessories hour 0.10 682.00 68.20
d) Overhead charges @ 10 % on (a+b+c) 17.53
e) Contractor's profit @ 10 % on (a+b+c+d) 19.28
212.08
Add 1% labour cess 2.12
Rate per kg = (a+b+c+d+e) 214.20
Add 12% GST 25.70
Rate per Kg. 239.91
say 240.00
B Cement Mortar (1:1) Grouting
Unit = kg
Taking output = 1 kg
a) Material
Cement including 10 per cent wastage kg 0.55 6.88 3.78
Sand including 10 per cent wastage kg 0.55 0.77 0.42
Admixtures (anti shrinkage compound) @ 20 per cent 0.76
of cost of cement
b) Labour
Mate day 0.08 350.00 28.00
Mazdoor (Skilled) day 0.10 350.00 35.00
Mazdoor day 0.10 350.00 35.00
c) Machinery
Grout pump with agitator and accessories hour 0.10 682.00 68.20
d) Overhead charges @ 10 % on (a+b+c) 17.12
e) Contractor's profit @ 10 % on (a+b+c+d) 18.83
207.11
Add 1% labour cess 2.07
Rate per kg = (a+b+c+d+e) 209.18
Add 12% GST 25.10
Rate per Kg. 234.28
say 234.00
6.6 2800 Patching of damaged concrete surface with polymer
concrete and curing compounds, initiator and promoter,
available in present formulations, to be applied as per
instructions of manufacturer and as approved by the
Engineer.
Unit = sqm
Taking output = 10 sqm for an average thickness of
25mm.
a) Labour
Mate day 0.06 350.00 21.00
Mazdoor (Skilled) day 0.75 350.00 262.50
Mazdoor day 0.75 350.00 262.50
328
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Material
Pre-packed polymer concrete based on epoxy system kg 315.00 17.00 5355.00
complete with curing compound, intiator and promoter
including 5 per cent wastage.
c) Machinery
Grout pump with agitator and accessories hour 2.00 682.00 1364.00
d) Overhead charges @ 10 % on (a+b+c) 726.50
e) Contractor's profit @ 10 % on (a+b+c+d) 799.15
8790.65
Add 1% labour cess 87.91
Cost for 10 sqm = a+b+c+d+e 8878.56
Rate per sqm = (a+b+c+d+e)/10 887.86
Add 12% GST 106.54
Rate per Kg. 994.40
say 994.00
Note This item is a proprietory item available in market as pre-
packed polymer concrete and is required to be applied as per
instructions of the manufacturer.
6.7 2803 Sealing of crack / porous concrete with Epoxy Grout by
injection through nipples complete as per clause 2803.1.
Unit = kg
Taking output = 1 kg
a) Material
Epoxy including 10 per cent wastage kg 1.10 17.00 18.70
b) Labour
Mate day 0.08 350.00 28.00
Mazdoor (Skilled) day 0.10 350.00 35.00
Mazdoor day 0.10 350.00 35.00
c) Machinery
Epoxy Injection gun hour 0.10 809.00 80.90
d) Overhead charges @ 10 % on (a+b+c) 19.76
e) Contractor's profit @ 10 % on (a+b+c+d) 21.74
239.10
Add 1% labour cess 2.39
Rate per kg = (a+b+c+d+e) 241.49
Add 12% GST 28.98
Rate per Kg. 270.47
say 270.00
6.8 2804 Applying epoxy mortar over leached, honey combed and
spalled concrete surface and exposed steel
reinforcement complete as per Technical Specification
Unit = sqm
Taking output = 10 sqm
Assume average 10mm thickness of epoxy mortar
a) Material
Epoxy resin-hardener mix for prime coat kg 2.50 1784.00 4460.00
Epoxy mortar kg 2.20 2738.00 6023.60
Epoxy resin -hardener mix for seal coat. kg 2.00 1784.00 3568.00
Add 3 per cent cost of material for other consumables 421.55
like acetone etc and to cover wastage.
b) Labour
Mate day 0.04 350.00 14.00
Mazdoor (Skilled) day 0.50 350.00 175.00
329
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Mazdoor day 0.50 350.00 175.00
c) Overhead charges @ 10 % on (a+b) 1483.71
d) Contractor's profit @ 10 % on (a+b+c) 1632.09
17952.95
Add 1% labour cess 179.53
Cost for 10 sqm = a+b+c+d 18132.48
Rate per sqm = (a+b+c+d)/10 1813.25
Add 12% GST 217.59
Rate per sqm. 2030.84
say 2031.00
6.9 2807 Removal of defective concrete, cleaning the surface
thoroughly, applying the shotcrete mixture mechanically
with compressed air under pressure, comprising of
cement, sand, coarse aggregates, water and quick
setting compound in the proportion as per clause
2807.1., sand and coarse aggregates conforming to IS:
383 and table 1 of IS: 9012 respectively, water cement
ratio ranging from 0.35 to 0.50, density of gunite not less
than 2000 kg/cum, strength not less than 25 Mpa and
workmanship conforming to clause 2807.6.
unit: sqm
Taking output = 10 sqm, 40 mm average thickness.
a) Labour
Mate day 0.04 350.00 14.00
Mazdoor day 0.50 350.00 175.00
Mazdoor (Skilled) day 0.50 350.00 175.00
b) Machinery
Air compressor 250 cfm hour 1.00 488.00 488.00
Shotcreteing equipment hour 1.00 488.00 488.00
water tanker 6 KL capacity hour 0.02 500.00 10.00
c) Material
Cement kg 120.00 6.88 825.00
Sand cum 0.15 1156.00 173.40
Coarse aggregate of size 4.75mm cum 0.15 883.00 132.45
Quick setting compound kg 2.50 106.00 265.00
Water KL 0.10 102.00 10.20
d) Overhead charges @ 10 % on (a+b+c) 275.61
e) Contractor's profit @ 10 % on (a+b+c+d) 303.17
3334.82
Add 1% labour cess 33.35
Cost for 10 sqm = a+b+c+d+e 3368.17
Rate per sqm = (a+b+c+d+e)/10 336.82
Add 12% GST 40.42
Rate per sqm. 377.23
say 377.00
6.10 2800 Applying pre-packed cement based polymer mortar of
strength 45 Mpa at 28 days for replacement of spalled
concrete
Unit = sqm
Taking output = 10 sqm
Assumed thickness - 10 mm
a) Material
Acrylic polymer bonding coat Litre 1.40 289.00 404.60
330
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
pre-packed cement based polymer mortar of strength 45 kg 12.00 17.00 204.00
Mpa at 28 days
Add 3 per cent of (a ) above for wastage. 18.26
b) Labour
Mate day 0.04 350.00 14.00
Mazdoor (Skilled) day 0.50 350.00 175.00
Mazdoor day 0.50 350.00 175.00
c) Overhead charges @ 10 % on (a+b) 99.09
d) Contractor's profit @ 10 % on (a+b+c) 108.99
1198.94
Add 1% labour cess 11.99
Cost for 10 sqm = a+b+c+d 1210.93
Rate per sqm = (a+b+c+d)/10 121.09
Add 12% GST 14.53
Rate per sqm. 135.62
say 136.00
6.11 2805 Eproxy bonding of new concrete to old concrete
Unit = sqm
Taking output = 10 sqm
a) Material
Epoxy resin with pot life not less than 60-90 minutes and kg 8.00 1784.00 14272.00
satisfying testing as per clause 2803.9
Add 3 per cent of (a ) above for wastage. 428.16
b) Labour
Mate day 0.04 350.00 14.00
Mazdoor (Skilled) day 0.50 350.00 175.00
Mazdoor day 0.50 350.00 175.00
c) Overhead charges @ 10 % on (a+b) 1506.42
d) Contractor's profit @ 10 % on (a+b+c) 1657.06
18227.63
Add 1% labour cess 182.28
Cost for 10 sqm = a+b+c+d 18409.91
Rate per sqm = (a+b+c+d)/10 1840.99
Add 12% GST 220.92
Rate per sqm. 2061.91
say 2062.00
6.12 2810 Providing external prestressing with high tensile steel
wires/strands including drilling for passage of
prestessing steel, all accessories for stressing and
stressing operation and grouting complete as per
drawing and Technical Specification
Span assumed: 25 m
No. of cables: 4 no.
No. of anchorages : 8 no.
Unit = MT
Taking output = 1 MT
Assume 12.7mm dia. Strand in 12T13 system. Weight-9.42
kg/m of cable.
a) Material
HTS strand including 5 per cent wastage and extra tonne 1.05 138583 145512.15
length for jacking
HDPE pipes 75mm dia including 5 per cent wastage metre 112.00 218.00 24416.00
Cement for grouting kg 400.00 6.88 2750.00
Tube anchorage set complete with bearing plate, each 8.00 481.00 3848.00
permanent wedges etc
331
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Epoxy kg 6.00 17.00 102.00
MS plates for deviator (where deviator blocks are not tonne 2.10 55110.0 115731.00
provided)
Add 20 per cent cost of material for other materials like 58471.83
lead sheet, sleeves, deviator fixtures etc.
b) Labour
i) For making holes in the structure .
Mate day 0.24 350.00 84.00
Mazdoor Semi-skilled) day 3.00 350.00 1050.00
Mazdoor day 3.00 350.00 1050.00
ii) For making and fixing anchorages for cables and
placement of cables .
Mate day 0.44 350.00 154.00
Blacksmith day 3.00 505.17 1515.50
Mazdoor day 8.00 350.00 2800.00
iii) For prestressing
Mate/Supervisor day 0.13 350.00 45.50
Fitter day 0.70 403.67 282.57
Mazdoor day 2.65 350.00 927.50
iv) For grouting
Mate/Supervisor day 0.13 350.00 45.50
Mason day 0.70 505.17 353.62
Mazdoor day 2.65 350.00 927.50
c) Machinery
Stressing jack with pump hour 4.00 328.00 1312.00
Grouting pump with agitator hour 1.35 682.00 920.70
d) Overhead charges @ 10 % on (a+b+c) 36229.94
e) Contractor's profit @ 10 % on (a+b+c+d) 39852.93
438382.23
Add 1% labour cess 4383.82
Rate per MT = (a+b+c+d+e) 442766.05
Add 12% GST 53131.93
Rate per MT. 495897.98
say 495898.00
6.13 2810 Providing external prestressing with high tensile steel
wires/strands including drilling for passage of
prestessing steel, all accessories for stressing and
stressing operation and grouting complete as per
drawing and Technical Specification
Span assumed: 50 m
No. of cables: 4 no.
No. of anchorages : 8 no.
Unit = MT
Taking output = 3.10 MT
Assume 12.7mm dia. Strand in 19T13 system. Weight-14.73
kg/m of cable.
a) Material
HTS strand including 5 per cent wastage and extra tonne 3.10 138583.00 429607.30
length for jacking
HDPE pipes 90mm dia including 5 per cent wastage metre 224.00 264.00 59136.00
Cement for grouting tonne 1.01 6875.00 6943.75
Tube anchorage set complete with bearing plate, each 8.00 481.00 3848.00
permanent wedges etc
Epoxy kg 10.00 17.00 170.00
MS plates for deviator (where deviator blocks are not tonne 7.00 55110.00 385770.00
provided)
332
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Add 20 per cent cost of material for other materials like 177095.01
lead sheet, sleeves, deviator fixtures etc.
b) Labour
i) For making holes in the structure .
Mate day 0.08 350.00 28.00
Mazdoor Semi-skilled) day 8.00 350.00 2800.00
Mazdoor day 8.00 350.00 2800.00
ii) For making and fixing anchorages for cables and
placement of cables .
Mate day 1.28 350.00 448.00
Blacksmith day 7.00 505.17 3536.17
Mazdoor day 25.00 350.00 8750.00
iii) For prestressing
Mate/Supervisor day 0.20 350.00 70.00
Fitter day 1.00 403.67 403.67
Mazdoor day 4.00 350.00 1400.00
iv) For grouting
Mate/Supervisor day 0.26 350.00 91.00
Mason day 1.50 505.17 757.75
Mazdoor day 5.00 350.00 1750.00
c) Machinery
Stressing jack with pump hour 7.00 328.00 2296.00
Grouting pump with agitator hour 3.00 682.00 2046.00
d) Overhead charges @ 10 % on (a+b+c) 108974.66
e) Contractor's profit @ 10 % on (a+b+c+d) 119872.13
1318593.44
Add 1% labour cess 13185.93
Cost for 3.10 MT = a+b+c+d+e 1331779.37
Rate per MT = (a+b+c+d+e)/3.10 429606.25
Add 12% GST 51552.75
Rate per MT. 481159.00
say 481159.00
6.14 2810 Providing external prestressing with high tensile steel
wires/strands including drilling for passage of
prestessing steel, all accessories for stressing and
stressing operation and grouting complete as per
drawing and Technical Specification
Span assumed: 100 m
No. of cables: 6 no.
No. of anchorages : 12 no.
Unit = MT
Taking output = 9.28 MT
Assume 12.7mm dia. Strand in 19T13 system. Weight-14.73
kg/m of cable.
a) Material
HTS strand including 5 per cent wastage and extra tonne 9.28 138583.00 1286050.24
length for jacking
HDPE pipes 90 mm dia including 5 per cent wastage metre 672.00 264.00 177408.00
Cement for grouting tonne 3.04 6875.00 20900.00
Tube anchorage set complete with bearing plate, each 12.00 481.00 5772.00
permanent wedges etc
Epoxy kg 14.00 17.00 238.00
MS plates for deviator (where deviator blocks are not tonne 20.00 55110.00 1102200.00
provided)
Add 20 per cent cost of material for other materials like 518513.65
lead sheet, sleeves, deviator fixtures etc.
333
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
b) Labour
i) For making holes in the structure .
Mate day 1.72 350.00 602.00
Mazdoor Semi-skilled) day 18.00 350.00 6300.00
Mazdoor day 25.00 350.00 8750.00
ii) For making and fixing anchorages for cables and
placement of cables .
Mate day 4.00 350.00 1400.00
Blacksmith day 20.00 505.17 10103.33
Mazdoor day 80.00 350.00 28000.00
iii) For prestressing
Mate/Supervisor day 0.30 350.00 105.00
Fitter day 1.50 403.67 605.50
Mazdoor day 6.00 350.00 2100.00
iv) For grouting
Mate/Supervisor day 1.00 350.00 350.00
Mason day 5.00 505.17 2525.83
Mazdoor day 20.00 350.00 7000.00
c) Machinery
Stressing jack with pump hour 10.00 328.00 3280.00
Grouting pump with agitator hour 10.00 682.00 6820.00
d) Overhead charges @ 10 % on (a+b+c) 318902.36
e) Contractor's profit @ 10 % on (a+b+c+d) 350792.59
3858718.50
Add 1% labour cess 38587.19
Cost for 9.28 MT = a+b+c+d+e 3897305.69
Rate per MT = (a+b+c+d+e)/9.28 397684.25
Add 12% GST 47722.11
Rate per MT. 445406.36
say 445406.00
6.15 2808 Replacement of Bearings complete as per Technical
Specification
Unit = No
Taking output = 3 No.
Lifting of superstructure span by jacking up from below i.e. by
placing the jacks on pier/abutment caps for span length of
30m.
a) Lifting of span
i) Hire charges for jack of 40 tonne lifting capacity. Day 3.00 546.00 1638.00
Mate day 0.64 350.00 224.00
Mazdoor (Skilled) day 4.00 350.00 1400.00
Mazdoor day 12.00 350.00 4200.00
v) Wooden packing cum 0.15 60000.00 9000.00
b) Replacement of bearing
Cost of bearing. each 3.00 75000.00 225000.00
c) Overhead charges @ 10 % on (a+b) 24146.20
d) Contractor's profit @ 10 % on (a+b+c) 26560.82
292169.02
Add 1% labour cess 2921.69
Cost of repair of 3 bearings = a+b+c+d 295090.71
Rate of repair per bearing = (a+b+c+d)/3 98363.57
Add 12% GST 11803.63
Rate per MT. 110167.20
say 110167.00
334
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Note The work entails replacement of all the bearings on one side
of the span.
6.16 2808 Rectification of Bearings as per Technical Specifications
Unit = 1 No
Taking output = 3 No.
a) Lifting of superstructure span by jacking up from
below i.e. by placing the jacks on pier/abutment caps for
span length of 30m.
i) Hire charges for jack of 40 tonne lifting capacity. each 3.00 546.00 1638.00
ii) Mate day 0.64 350.00 224.00
iii) Mazdoor (Skilled) day 4.00 350.00 1400.00
iv) Mazdoor day 12.00 350.00 4200.00
v) Wooden packing cum 0.15 60000.00 9000.00
b) Cost of parts to be replaced for 3 bearings. each 3.00 25000.00 75000.00
c) Overhead charges @ 10 % on (a+b) 9146.20
d) Contractor's profit @ 10 % on (a+b+c) 10060.82
110669.02
Add 1% labour cess 1106.69
Cost of repair of 3 bearings = a+b+c+d 111775.71
Rate of repair per bearing = (a+b+c+d)/3 37258.57
Add 12% GST 4471.03
Rate of repair per bearing 41729.60
say 41730.00
Note The rectification of 3 bearings included in this analysis are on
the same side of the span.
6.17 Replacement of Expansion Joints complete as per
drawings
Unit -1 RM
Taking output = 12 RM
a) Material
Epoxy for bonding new concrete to old concrete @ 0.8 kg 9.60 17.00 163.20
kg/sqm
M-30 grade cement concrete excluding OH & CP (Rate cum 3.60 11579.00 41684.40
as per items 14.1 C (i)
b) Labour
Removal of old expansion joint including breaking of
concrete, cutting of lugs and shifting of broken material etc.
Mate day 0.26 350.00 91.00
Mazdoor day 6.00 350.00 2100.00
Mazdoor (Skilled) day 0.50 350.00 175.00
c) Overhead charges @ 10 % on (a+b) 4421.36
d) Contractor's profit @ 10 % on (a+b+c) 4863.50
53498.46
Add 1% labour cess 534.98
Cost for replacement of 12 RM = a+b+c+d 54033.44
Rate per RM = (a+b+c+d)/12 4502.79
Add 12% GST 540.33
Rate per RM 5043.12
say 5043.00
Note The rate for the installation of new expansion joints may be
taken from the chapter on superstructure. Broken concrete
will have to be replaced which has been included in this
analysis.
6.18 Replacement of Damaged Concrete Railing.
335
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Unit = RM
Taking output = 10 RM
a) Labour
Labour for dismantling old railing and disposal of dismantled
material.
Mate day 0.20 350.00 70.00
Mazdoor day 5.00 350.00 1750.00
b) Machinery
Tractor-trolley for disposal of dismantled material hour 1.00 581.00 581.00
c) Overhead charges @ 10 % on (a+b) 240.10
d) Contractor's profit @ 10 % on (a+b+c) 264.11
2905.21
Add 1% labour cess 29.05
Cost for 10 m = a+b+c+d 2934.26
Rate per metre = (a+b+c+d)/10 293.43
Add 12% GST 35.21
Rate per M 328.64
say 329.00
Note The rate for the provision of new railing may be adopted from
the chapter on superstructure.
6.19 Replacement of Crash Barrier.
Unit = RM
Taking output = 10 M
a) Labour
Labour for dismantling old railing and disposal of dismantled
material.
Mate day 0.40 350.00 140.00
Mazdoor day 10.00 350.00 3500.00
b) Machinery
Tractor-trolley for disposal of dismantled material hour 1.00 581.00 581.00
c) Overhead charges @ 10 % on (a+b) 422.10
d) Contractor's profit @ 10 % on (a+b+c) 464.31
5107.41
Add 1% labour cess 51.07
Cost for 10 m = a+b+c+d 5158.48
Rate per metre = (a+b+c+d)/10 515.85
Add 12% GST 61.90
Rate per M 577.75
say 578.00
Note The rate for the construction of new crash barrier may be
adopted from chapter 8 on Traffic and Transportation.
6.20 Replacement of Damaged Mild Steel Railing
Unit = RM
Taking output = 10 M
a) Labour
Labour for dismantling old railing and disposal of dismantled
material.
Mate day 0.16 350.00 56.00
Mazdoor day 4.00 350.00 1400.00
b) Machinery
Tractor-trolley for disposal of dismantled material hour 1.00 581.00 581.00
c) Overhead charges @ 10 % on (a+b) 203.70
d) Contractor's profit @ 10 % on (a+b+c) 224.07
2464.77
Add 1% labour cess 24.65
336
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Cost for 10 m = a+b+c+d 2489.42
Rate per metre = (a+b+c+d)/10 248.94
Add 12% GST 29.87
Rate per M 278.81
say 279.00
6.21 Repair of Crash Barrier
Repair of concrete crash barrier with cement concert of M-30
grade by cutting and trimming the damaged portion to a
regular shape, cleaning the area to be repaired thoroughly,
applying cement concert after erection of proper form work.
Unit = Running meter.
Taking output = 10 M.
It is assumed that damage is to the extent of 10 per cent of
the volume of concrete .This will require 0.30 cum of
concrete.
a) Manpower*
Mate day 0.04 350.00 14.00
Mazdoor day 1.00 350.00 350.00
* For dismantling and trimming the surface to a regular shape
and removal of damaged material.
b) Material
M-30 grade cement concrete excluding OH & CP (Rate cum 0.30 11579.00 3473.70
as per items 14.1 C (i)
This may be priced based on the rate given the chapter of
superstructure.
c) Overhead charges @ 10 % on (a) 36.40
d) Contractor's profit @ 10 % on (a+c) 40.04
3914.14
Add 1% labour cess 39.14
Cost for 10 m = a+b+c+d 3953.28
Rate per m = (a+b+c+d)/10 395.33
Add 12% GST 47.44
Rate per M 442.77
say 443.00
6.22 Repair of RCC Railing
Carrying out repair of RCC M30 railing to bring it to the
original shape.
Unit = Running meter.
Taking output = 10 M.
It is assumed that damage is to the extent of 10 per cent .
a) Material
M-30 grade cement concrete excluding OH & CP (Rate cum 0.10 11579.00 1157.90
as per items 14.1 C (i)
HYSD bar reinforcement Rate as per item No tonne 0.01 67979.00 883.73
14.2(Excluding OH & CP)
b) Labour*
Mate day 0.016 350.00 5.60
mazdoor day 0.20 350.00 70.00
* For dismantling and trimming the surface to a regular shape
and removal of damaged material.
c) Overhead charges @ 10 % on (b) 7.56
d) Contractor's profit @ 10 % on (b+c) 8.32
2133.10
Add 1% labour cess 21.33
Cost for 10 m = a+b+c+d 2154.43
337
Ref. to
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
Spec.
Rate per m = (a+b+c+d)/10 215.44
Add 12% GST 25.85
Rate per M 241.30
say 241.00
6.23 Repair of Steel Railing
Repair of steel railing to bring it to the original shape
It is assumed that the damage to the steel railing is to the
extent of 10 per cent .
Unit = Running meter.
Taking output = 10 M.
a) Material
Mild steel ISMC series kg 29.00 55.11 1598.19
Flat iron kg 10.00 55.11 551.10
MS Bolt and nuts kg 1.00 85.00 85.00
Add 5 per cent of cost of material for painting. 111.71
b) Labour
Mate day 0.016 350.00 5.60
Mazdoor (Skilled) day 0.20 350.00 70.00
Mazdoor day 0.20 350.00 70.00
c) Overhead charges @ 10 % on (a+b) 249.16
d) Contractor's profit @ 10 % on (a+b+c) 274.08
3014.84
Add 1% labour cess 30.15
Cost of repair for10m = a+b+c+d 3044.99
Cost of meter = (a+b+c+d)/10 304.50
Add 12% GST 36.54
Rate per M 341.04
say 341.00
6.24 Extra for providing and mixing polyester trinagular synthetic
fibres in specified ratio 6-18mm length, melting point 240-260
degree centigrade and having specifiv gravity of 1.33-1.40 as
per IS-456 ammendment August 2007 & IRC 44-2008 @ 125
gramme/50kg of cement bag in all types of CC, RCC,
plastering and flooring work etc.
Unit = Per Tonne.
Detail of cost for 1 bag of cement 50kg weight.
a) Material
Polyester trinagular synthetic fibres kg 0.13 427.00 53.38
Carriage & labour for mixing. L.S. 8.00
61.38
b) Overhead charges @ 10 % on (a) 6.14
d) Contractor's profit @ 10 % on (a+b) 6.75
74.26
Add 1% labour cess 0.74
Cost of mixing fibre in 1 bag (50kg) of cement. 75.01
Cost of mixing the fibre per tonne of cement.meter = 1500.13
(a+b+c+d)/10
Add 12% GST 180.02
Rate per M 1680.14
say 1680.00
338