Professional Documents
Culture Documents
Brochure DT1-362
Brochure DT1-362
Grid Solutions
DT1-362
Dead Tank Circuit Breakers for 362 kV Options
The DT1-362 can be supplied with many
Thanks to its robust design, the DT1-362 is a highly reliable circuit breaker even under the most customized options such as:
severe operating conditions and is tested to meet or exceed IEEE/ANSI and IEC standards, including
the more difficult aspects of the IEEE/ANSI 2009 standards. Pre-Insertion Resistors
Point-On-Wave controller relay
Unique Performance Parallel surge arresters for reactor
The DT1-362 is suitable for applications up to nameplate ratings, including definite purpose ratings switching
and is qualified under the latest IEEE/ANSI and IEC standards as C2 class for capacitor switching (very
Composite or porcelain bushing insulators
low restrike probability) and reactor switching applications. Our spring-spring-operated mechanism
and extensive mechanical design testing to 10,000 operations and class M2 certification ensure On-line condition monitoring
trouble-free operation for the lifetime of the circuit breaker.
Wide phase spacing
Certified Quality
GE designs, manufactures, tests and delivers its circuit breakers in accordance with IEEE/ANSI and IEC
Main Characteristics
standards, maintaining a quality assurance system according to IS0-9001 and IS0-14001. The Advanced self-blast interrupters
competence center for dead tank circuit breakers is located in Charleroi, PA (USA). Leak resistant single-piece cast
aluminum enclosures
Leading Gas Testing Durable low energy
Every DT1-362 breaker produced by GE is subjected to a rigorous SF6 gas tightness testing protocol. spring/spring-operated mechanisms
0ur state-of-the-art testing system validates the gas integrity of every circuit breaker in the as
More than 100,000 circuit breakers
shipped condition with bushings installed. This proprietary system provides quantifiable evidence of
our <0.5% guaranteed leak rate in the exact configuration in which the breaker is delivered to you.
with self-blast interrupters and FK
spring/spring-operated mechanisms in
service since 1989
Enhanced Transportation, Installation and Maintenance
The circuit breaker design is optimized for quick and easy installation at site. Where truck shipments
are possible, individual poles are shipped with bushings and the operating mechanism assembled. In
Key Benefits
this case, site work involves installing the poles on the common supporting frame and making the SF6 gas tightness guarantee
necessary low voltage electrical connections. Each phase is factory set to the proper position,
eliminating the need for complex rigging at site. High performance ratings
Reliability under the most severe
The DT1-362 is factory tested and adjusted. It does not need any special tools for installation. The conditions
option of slip-over bushing current transformers is also available. Thanks to the low-energy
mechanism and lifetime lubricants, every circuit breaker in the DT1 series is virtually Design customization
maintenance-free. Virtually maintenance free
The DT1-362 is qualified for controlled switching of shunt capacitors, shunt reactors, Easy to install
transformers and unloaded lines with the addition of a point-on-wave controller relay. The DT1-362
can also be equipped with Pre-Insertion Resistors (PIR) and parallel surge arresters for reactor
switching.
Imagination at work
GEGridSolutions.com
For more information please contact
GE and the GE monogram are trademarks of General Electric Company.
GE
Grid Solutions GE reserves the right to make changes to specifications of products described at any time without
notice and without obligation to notify any person of such changes.
Imagination at work