Catalog Beck

Inhoud
BECK IPC CHIP............................................................................................................................................ 2

IPC@CHIP® SC243 ..................................................................................................................................... 2
®
New IPC@CHIP SC23 / SC24 in the Module Housing .............................................................................. 5
®
IPC@CHIP SC1x5 ...................................................................................................................................... 8
®
IPC@CHIP SC123 / SC143 .................................................................................................................... 15
®
IPC@CHIP DK61 Development Kit ........................................................................................................ 19
®
IPC@CHIP DK241 Development Kit ...................................................................................................... 22
®
IPC@CHIP DK151 Development Kit ........................................................................................................ 23
®
IPC@CHIP DK55 Development Kit .......................................................................................................... 24
®
CODESYS für IPC@CHIP SC1x3 / SC2x ................................................................................................ 26
Paradigm C/C++ Beck IPC Edition.............................................................................................................. 28
com.tom .................................................................................................................................................29
IoT components off the shelf ....................................................................................................................... 29
Cloud & Portal Service ................................................................................................................................ 33
Datasheet: com.tom INDUSTRY 115.W ..................................................................................................... 35
Datasheet: com.tom INDUSTRY ................................................................................................................ 39
Smart Grid Interface Module: Increased reliability for smart energy supply ............................................. 48
Electric specification .................................................................................................................................... 50
1
BECK IPC CHIP

IPC@CHIP® SC243
As like SC1x3 and SC2x the SC243 is planned

with an optional CODESYS SP Runtime Lizence.
SC243
Package Module 60 mm x 56 mm;
2 x 120 PIN board-to-board
connector
CPU MPC5200B / 400 MHz
RAM Memory 64 MByte
(free) (~ 62 MB)
The IPC@CHIP® is a universal controller and Flash Memory 32 MByte

communication processor that stands out for its (free as Flash- (~ 26 MB)
user-friendly software and interface features. In Disk)
order to offer this level of convenience also in high- SRAM (battery 512 KB
end applications such as in motion control, high- powered)
speed closed-loop controllers, sophisticated MMIs
or the fast transport of large data sets, we are Ethernet 1 x 10/100BaseT (MAC)
expanding our IPC@CHIP® range with the new Serial 6 x TTL
IPC@CHIP® SC2x3 product family.
CAN 2 x CAN 2.0B
With 760 MIPS at a clock frequency 400 MHz, 32-
Other Interfaces 2 x USB1.1, 2 x I2C, SPI
bit and integrated Double Precision Floating Point
Unit, the new SC2x3 modules are predestined for I/O 40 free prog. PIO-Pins
demanding control and communication tasks. (GPIO), 7 x Timer (In-/Out,
PWM), LocalPlusBus,
Up to 64 MByte SDRAM and 32 MByte Flash offer ATA/IDE
sufficient memory for extensive applications. The
Flash memory can be expanded easily via SD card Supply Voltage 3,3V
and Compact Flash card. Power Dissipation max. 5W
Temerature -40 to 85 °C
Software Range
It is only the software that turns the Embedded
Controller into an IPC@CHIP®. That is why the
SC2x3 family also comes naturally with a pre-
installed multitasking real-time operating system. More Informations at http://www.beck-ipc.com
The IPC@CHIP® RTOS/32 offers a powerful
SC123/143-compatible API interface enabling your
application to conveniently utilise the functions of
the SC2x3 and the operating system.
A development system designed for the new

family, consisting of a development board and the
integrated C/C++ and CODESYS development
environment with integrated debugger is also
available for fast product development.
IS_SC2x3_EN_V8.PDF Beck IPC GmbH

© Copyright Beck IPC GmbH Nauborner Straße 184
35578 Wetzlar/Germany
2
Datasheet: SC243
The IPC@CHIP® SC2x3 family of Computer on Modules are
embedded processors built on Power Architecture™ technology
and are specially designed for demanding control, communication
and HMI tasks. The Freescale power processor offers 760 MIPS
processing performance and a high-speed Floating Point Unit –
ideal for fast data communication or complex control tasks for
example in the field of motion control.
It includes processor, RAM and FLASH memory, Ethernet MAC
and serial interfaces, a complete microcontroller interface with
address/data bus, programmable chip selects and GPIOs.
This ready to use embedded plattform comes with a preinstalled
realtime multitasking operating system with complete TCP/IP
stack, file system and a large application interface.
Technical data
Processor 32-Bit PowerPC MPC5200B
Working memory (SDRAM) 64 MB SDRAM (free user
space see API documentation)
Flash memory for operating 32 MB FLASH (free user space
system and internal File System see API documentation)
Low power SRAM 512kByte
Asynchronous serial 6xRS232/485/422 port (RxD,
TxD, RTS, CTS, DCD) + 512
byte FIFO
Ethernet 1 x MAC with MII
I/O 40 GPIO, 32-Bit A/D Local Plus
Bus, ATA/IDE
Supply voltage 3,3 V +/-5%
Power dissipation <5W
Operating temperature (TA) -40ºC to +85ºC
Operating system IPC@CHIP RTOS - PPC
Footprint Two 120 pin Board to Board
connectors, lead free/ RoHS
conform
DS_SC243_V3.PDF Beck IPC GmbH

© Beck IPC GmbH Nauborner Straße 184
Product: SC223/SC243 35578 Wetzlar/Germany
3
Features
» Floating Point Unit » One SPI-bus
» Six asynchronous serial ports » Two USB 1.1 host ports
» FLASH memory with min. » Two CAN2.0B ports
100.000 write cycles » Internal watchdog
» 10/100 Ethernet MAC » Eight independent
» Two I²C-busses programmable Timers
» Single 3,3V supply » Four dedicated Interrupt
» ATA/IDE Interface inputs
» GPIOs with interrupt » Low power SRAM
functionality powered by ext. battery
Package dimensions
Design and handling guidelines
It is recommended to use the ZT200 to Electrostatic

unplug the SC2x3 out of the socket. Sensitive Device
Ordering information
IPC@CHIP SC xxx yyy
Software licence
Flash size
Single Chip
SC243 00563963 SC243-IEC3 00570736

SC243-PIS 00570685
DS_SC243_V3.PDF Beck IPC GmbH

4
New IPC@CHIP® SC23 / SC24 in the Module Housing

Add-ons already available for SC123/SC143, such
as the WL01 wireless LAN module, can be
connected via the SPI interface.
Software compatible with SC12 and SC123
The SC23/SC24 is fully software compatible with

SC123/SC143. All hardware and software
functions can be used via the software API of the
IPC@CHIP® RTOS in the usual manner.
Projects that were created for SC12 and SC13 with
the Borland compiler have to be recompiled with
the Paradigm C/C++ compiler and adapted to the
different I/O interface as required.
As well as performance and the features of an A suitable CODESYS SP runtime system and a
embedded controller, easy handling with small and SC23/SC24 variant with integrated CODESYS
medium-sized quantities is a key factor for many runtime license are naturally also provided for
applications. IEC61131-3 programming.
The IPC@CHIP® SC23/SC24, which with its DIL32
module housing continues the success of the Fast entry with the DK55 development system
IPC@CHIP® SC12, is designed to target these
applications as well as featuring the state-of-the-art Like for all IPC@CHIP® series, a suitable
technology of the latest SC123/SC143 controller at development system is also available for the
the same time. SC23/SC24 which also contains the necessary
The SC23/SC24 is designed for use in a DIL32 software development environment in the form of
socket in exactly the same way as the SC12 and the Paradigm C/C++ compiler as well as the
SC13, and can therefore be easily exchanged development board.
during production and service.
Further information is available at www.beck-
High performance and convenient memory ipc.com.
features
The SC23/SC24 combines the CPU performance

and memory capabilities of the SC13 with the tried
and tested module housing of the SC12 and SC13. ®
IPC@CHIP SC23 / SC24
With its powerful 96 MHz processor, 8 MB RAM
memory and 2 MB (SC23) / 8 MB (SC23) Flash » SC186-EX with 96 MHz
memory it offers sufficient resources for state-of- » 8 MB DRAM
the-art control and communication applications. » 2 MB Flash (SC23) / 8 MB Flash (SC24)
» 1 x 10/100 MBit/Ethernet with PHY
Convenient range of interfaces » 3 RS232/TTL serial interfaces
» 2 x CAN2.0b with optional CANopen stack
The fast hardware SPI and I2C interfaces of the » 1 x USB1.1 Host or Device
2
SC123/SC243 were also implemented, allowing » 1 x hardware SPI, 1 x hardware I C
the connection local expansions such as AD/DA » 17 GPIO lines, 3 interrupt inputs, 2 prog. hardware
timers
converters and additional I/Os.
» Fast hardware SPI and hardware I2C for I/O and
Up to 17 universal GPIOs are provided for the memory expansion
direct control of local I/Os. » Supply voltage 3.3V / <1.5 Watt
As well as the I00Mbit/s Ethernet and up to three » Industrial temperature range -25..+85° C
serial interfaces, the SC23/SC24 comes with two » DIL32 module housing for DIL32 socket
CAN2.0b and one USB host/device interface for ®
» IPC@CHIP RTOS, TCP/IP, web server and C-API
communication and fieldbus connections. » CODESYS SP Full runtime system 2.3
The external Flash memory is connected via
MMC/SD cards using the SPI interface.
IS_SC2x_EN_V5.PDF Beck IPC GmbH

5
Datasheet: SC23/SC24
The SC23 / SC24 is an embedded web controller developed for
the industrial control and communication market.
It includes processor, RAM and FLASH memory, Ethernet and
several serial interfaces, system clock generation and GPIO.
This ready to use embedded platform comes with a preinstalled

stack, a file system and a large application interface.
Technical data
Processor SC186-EX/96 MHz
Working memory (SDRAM) 8MB SDRAM (free user space
see API documentation)
Flash memory for operating 2 or 8 MB FLASH (free user
system and internal File System space see API documentation)
Asynchronous serial 3xRS232/TTL port (RxD, TxD,
RTS, CTS with DMA)
Ethernet 1 x 10/100BaseT
I/O 17 GPIO
Storage temperature -55ºC to +125ºC
Operating system IPC@CHIP® RTOS
Footprint DIL32
Features
» three asynchronous serial » One SPI-bus (hardware)
ports » One USB 1.1 port (host
» FLASH memory with min. and device)
100.000 write cycles » Two CAN2.0B ports
» Full integrated 10/100Base-T » Internal watchdog with
transceiver (IEEE 802.3 power supervisory
standard)
» Two independent
» One I²C-bus (hardware) programmable Timers
» 25MHz crystal + PLL » Three Interrupt inputs
DS_SC2x_V7.PDF Beck IPC GmbH

Product: SC23 / SC24 35578 Wetzlar/Germany
6
Pin Configuration
RXD1 1 32 PIO9 / PFI
TXD1 2 31 PIO0 / INT5# / TMRIN1
PIO12 / CTS1 3 30 PIO1 / INT3 / TMROUT1
RTS1 4 29 PIO10 / TMROUT0
PIO22 / TXD2 5 28 PIO11 / TMRIN0

®
PIO23 / RXD2 6 IPC@CHIP 27 PIO2 / INT1
PIO21 / CANRXD1 / CTS2 7 SC2x 26 RSTOUT#
PIO20 / CANTXD1 / RTS2 8 25 PIO31 / I²CCLK
PIO28 / SDI / RXD3 9 24 PIO13 / I²CDTA
PIO27 / SDO / TXD3 10 23 CANRXD0
PIO19 / SCK / RTS3 11 22 CANTXD0
PIO18 / SLVSEL / CTS3 12 21 TPRX-
USBP 13 20 TPRX+
USBN 14 19 TPTX-
VCC 15 18 TPTX+
GND 16 17 RESETIN / Traffic LED
Physical dimensions
20,10 x 42,30 x 12 mm
A DlL32 socket must be used within a Electrostatic

wave soldering process or a reflow Sensitive Device
soldering process.
The SC2x should not be plugged in the
socket during the soldering process.
Ordering information / Order-No.:

SC23 553944
SC23-IEC 553945
SC24 566821
SC24-IEC 566822
DS_SC2x_V7.PDF Beck IPC GmbH

Product: SC23 / SC24 35578 Wetzlar/Germany
7
IPC@CHIP SC1x5 ®
CAN 2 x CAN 2.0B

USB 2 x USB 2.0
SDIO Up to 2 x SDIO
I/O Up to 3 x I²C
Up to 3 x SPI
Up to 78 x GPIO
Up to 4 x Analogue IN
Up to 7 x PWM
Graphic 24-bit Parallel LCD port
The IPC@CHIP® SC1x5 is a universal and
embedded controller for industrial control Supply voltage Single 3.3V
applications and IoT communication tasks that is Power dissipation Typ. 1W
ready for immediate use. It stands out on account
of its user-friendly software and interface features. Temp. range -25 to 80 °C
All the important and proven hardware functions
and interfaces of the SC1x3 are also provided on Software
the SC1x5, together with a large number of
additional functions. The SC1x5 family is characterized by its flexibility
and the range of complementary software.
On the operating system side, two established and
The use of NOR flash ensures the requirements of proven solutions are available:
a durable and robust platform. A fast and reliable
@CHIP® RTOS-LNX and LINUX@CHIP.
FRAM (also FeRAM) provides the possibility to
save non-volatile data in the IPC@CHIP®. As
already with the SC1x3 family, a PHY and RMII
@CHIP® RTOS-LNX
interface provide a simple and flexible solution for
Ethernet. RTOS-LNX Is based on a Linux kernel with real-
time extension "PREEMPT RT". The benefits of
The appearance with CASTELLATIONS aims to the Linux kernel development and other open
ensure simple module design, 2 Layers are source projects will be used with it. The
feasible. It is easy to use in production, suitable for comprehensive RTOS-LNX API ensures
AOI. All components are selected for Long-term compatibility with the current and future IPC @
availability. CHIP® variants and keeps the complexity of a
Linux system away from the user. Additional
software solutions for Industrial, Smart grid and IoT
SC145 SC165 communication and application are available
Design SoM 25.5 mm x 25.5 mm; directly.
88-pin CASTELLATIONS,
38 auxiliary LGA pads All IPC@CHIP® variants with @CHIP-RTOS are
shipped with pre-installed OS.
CPU i.MX 6UltraLite 2
Cortex® A7 core @ 528MHz
RAM memory 128 MByte 512 MByte CODESYS Control for SC1x5
The runtime system "CODESYS Control for
Flash memory 64 MByte 256 MByte SC1x5" offers the user a variety of functions in
NOR Flash NOR Flash CODESYS for flexible use of SC1x5 and RTOS-
NV-RAM 8 kByte LNX functions. GPIO ports of SC1x5 can be used
flexibly with the CODESYS I/O driver. SPI and
Ethernet 1 x 10/100BaseT (PHY) I²C are available in flexible selection via
1 x RMII CODESYS libraries with function blocks. PWM
Serial Up to 6 x TTL and ADC I/O functions are flexibly available in
CODESYS as libraries with function blocks.
8
RTOS API functions are also available as LINUX@CHIP

CODESYS libraries with function blocks. Beck IPC GmbH provides support for the Yocto™
build system for the IPC@CHIP® SC1x5 platform.
Smart Grid Software for SC1x5 A LINUX@CHIP Meta layer and integrated recipes
For the IPC@CHIP® family the software stacks for bootloader and kernel is available. A cross-SDK
for the global IEC standards 60870-5-104 and is available free of charge as a virtual machine in
61850 are available. The complete adaptation of the download area. The BSP and necessary
the protocol stack on the @CHIP® RTOS and components are available on the Github platform,
the application programming interface (API) see https://github.com/beck-ipc
allows product developers to concentrate on the
actual development work of the device, that
drastically reducing the product development
time.
IoT protocol stack for SC1x5

The Kolibri - M2M Platform offers the perfect
solution for Live-data for of decentralized
systems. All components for an industrial IoT
application are available and synchronized.
The Kolibri Library for the IPC@CHIP® family
allows a easy implementation of a Kolibri-
Producer application. The library implements the
Kolibri protocol for communication with the Kolibri
Broker and provides the application an API
(application programming interface) for
configuration and transfer of data.
Modbus protocol stack

The IPC@CHIP® Modbus library supports the
implementation of Modbus based client/server or
master/slave communication via serial
RS232/RS485 lines (Modbus RTU) or TCP/IP
(Modbus TCP). Therefor the library supports:
Modbus RTU master
Modbus RTU slave
Modbus TCP client
Modbus TCP server
ONE Workbench for SC1x5

The ONE Workbench for IPC@CHIP® is a
comfortable integrated development environment
(IDE) for creating C and C++ applications for the
SC1x5. The workbench is based on the common
Eclipse framework and the CDT C/C++ editor
plug-in. It benefits from a large user community
which results in plenty of features for modern and
comfortable software development. The "ONE
Workbench for IPC@CHIP®" for Windows is
available free of charge in the download area.
More information is available at our website:

https://www.beck-ipc.com
9
Datasheet: SC1x5
The IPC@CHIP® SC1x5 is a ready to use embedded controller for
industrial control and IoT communication markets.
It includes a high performance processor on an ARM® Cortex A7
core, RAM and FLASH memory. The SC1x5 supports connections
to a variety of interfaces: two high-speed USB ports, two CAN
ports, two expansion card ports, and a variety of other popular
interfaces (such as UART, I2C, and SPI).
Technical data
Processor i.MX 6UltraLite 2
®
(Cortex A7 core @ 528MHz)
Working memory 128 MByte or 512 MByte DDR3
(for free user space, refer to API
documentation)
NV-RAM 8kByte F-RAM
Flash memory for operating 64 MByte or 256 MByte
system and internal file system NOR-Flash
(for free user space, refer to API
documentation)
Ethernet 2 x 10/100BaseT
(1 x external PHY required)
1)
Asynchronous serial Up to 6 x UART ports
1)
CAN Up to 2 x CAN 2.0B
USB 2 x USB 2.0, one as OTG
1)
I/O Up to 3 x I²C
Up to 3 x SPI
Up to 78 x GPIO
Up to 4 x Analogue IN
Up to 7 x PWM
SDIO 1) 1 x SDIO 3.0 prepared, 4 bit
1 x SDIO, 4 bit
Graphic 1) 24-bit Parallel LCD port, up to
WXGA (1366 x 768) at 60 Hz
Supply voltage Single 3,3V +/-5%
(use of USB requires additionally 5V)
RTC On board with crystal
Current consumption The values given are to be
seen as indicative values.
The consumption is typically
<300mA, strongly depends on
wiring options.
(e.g.: Application running, without ETH
and any additional Interface: 150mA
Application running with active ETH0,
no additional Interface in use: 200mA)
Operating Free-Air Temperature -25ºC to +80ºC
(TA) (Observe the details in the Hardware
Manual)
1)
Observe the software support for the different operating systems.
10

Operating system IPC@CHIP® RTOS-LNX
RTOS-LNX contains Open Source software,
distributed under different license terms (“GPL”,
“LGPL” and “FreeBSD”). For further details see
®
IPC@CHIP RTOS-LNX Documentation
section “Open-Source software”.
LINUX@CHIP
BSP and sample image based on Yocto Build
System with “Standard Linux Kernel”.
Footprint 88pin CASTELLATIONS,
38 auxiliary LGA pads
lead free/ RoHS conform
Features
» Easy to use in production, suitable » SDIO card interface
for AOI » USB 2.0
» Long-term availability » SPI / I²C interfaces
» Slight requirements for basic board, » GPIOs with interrupt functionality
2 Layers feasible » Two CAN2.0B ports
» 3,3 V single supply » RTC with crystal on board
» Up to four asynchronous serial » Main crystal on board
ports
» Non-volatile RAM
» Two Ethernet 10/100 MBit
» Two OS variants available
interfaces, one with PHY
11
Pin Configuration
?
(top view)
12
Package dimensions
Dimensions (L x W): 25.5 × 25.5 mm
Height: 3.5 mm
(top view, through module)
DESCRIPTION CASTELLATIONS LGA

Pad size 0.8 mm x 1.0 mm 1.5 mm x 1.5 mm
Pad pitch 1.0 mm 2.5 mm
Moisture sensitivity: J-STD-20C; Level 3 Electrostatic

Pb free reflow process: J-STD-20C; Sensitive Device
250°C+0°C
13
IPC@CHIP® SC 1x5 - yyyy

Type
Memory configuration
Single Chip - SoM
Memory configuration Working memory Flash memory NV-RAM

SC145 128 MByte DDR3 64 MByte NOR 8kByte F-RAM
SC165 512 MByte DDR3 256 MByte NOR 8kByte F-RAM
Orderable part numbers
IPC@CHIP® Type Fixed software licence, variant Part Number

SC145 0001 RTOS-LNX, no additional licence ..................... 00571076 1)
SC145 0002 CODESYS V3 Runtime license......................... 00571088 1)
SC145 0003 PIS-10 IEC 61850 license ................................. 00571173
SC145 0004 PIS-20 IEC 60870-5-104 license ...................... 00571174
SC145 0005 PIS-10 & PIS-20 license.................................... 00571175
SC145 FFFF No RTOS-LNX, Linux@CHIP ........................... 00571176 1)
SC165 0001 RTOS-LNX, no additional licence ..................... 00571172
SC165 FFFF No RTOS-LNX, Linux@CHIP ........................... 00571177
1)
MOQ: 24 pieces, all others with MOQ: 96 pieces.
MOQ (Minimum Order Quantity) = MPQ (Minimum Package Quantity)
14
IPC@CHIP SC123 / SC143 ®
lierten Echtzeit/Multitasking-Betriebssystem
IPC@CHIP®-RTOS und abwärtskompatibler API-
Schnittstelle ausgestattet und daher software-
kompatibel zu SC11 und SC13. Bestehende SC1x
Applikationen können nach einer Neuübersetzung
mit dem im Development-Kit enthaltenen neuen
Paradigm C/C++-Compiler weiterverwendet wer-
den.
Folgende Software-Funktionen sind zusätzlich in
das RTOS des SC123/SC143 integriert:
Als Erweiterung der Produktfamilie des • IPv6 (zusätzlich zu IPv4)
IPC@CHIP® bietet der SC123/SC143 mehr Per- • Sicherheitsprotokoll SSL, SSH und IPSec
formance, mehr Speicher und mehr Funktionalität
• PPPoE Protokoll
bei voller Software-Kompatibilität zu den beste-
henden SC11 und SC13 Controllern. • API für CAN-Controller (CANopen-Stack als
Option verfügbar)
Auch alle wichtigen und bewährten Hardware-
• API für grundlegende USB-Slave und –Host
funktionen und -schnittstellen des SC11/SC13 fin-
Funktionen, Unterstützung für USB-
den sich bei SC123/SC143 wieder und wurden um
Speichermedien (z.B. USB Sticks)
zahlreiche wichtige Funktionen ergänzt.
• nur noch eine RTOS-Version mit allen verfüg-
Die neue Bauform als BGA ist ausgerichtet auf baren Optionen (inkl. PPP und SNMP)
größere Stückzahlenvolumen in allen Bereichen
der industriellen Steuerung und Kommunikation. IEC 61131-3 Laufzeitsystem CODESYS SP
Das Laufzeitsystem basiert auf CODESYS SP 2.3
SC123 SC143
und steht als C-Library zur Verfügung, so dass in-
Bauform BGA177, 25x25x5mm dividuelle Anpassungen und Erweiterung leicht
CPU SC186-EX / 96 MHz möglich sind. Neben dem erweiterten Programm-
speicher für CODESYS-Projekte enthält das Lauf-
RAM-Speicher 8 MByte (ca. 7 MB) zeitsystem auch einen CANopen-Stack und unter-
(frei) stützt alle 4 seriellen Schnittstellen.
Flash- 2 MByte 8 MByte
IEC 61850Li (Lite implementation)
Speicher (frei (ca. 1 MB) (ca. 7 MB)
als Flash-Disk) IEC 61850 ist ein Informations-Management für die
Ethernet 1 x 10/100BaseT / PHY, Überwachung und Automatisierung von Energie-
1 x MII versorgungsanlagen.
Datenmodelle, Kommunikations-Services und der
Seriell 4 x TTL Geräte-Konfigurationssprache (SCL) sind reali-
CAN 2 x CAN 2.0B Master / Slave, siert. Alle Modelle aus den Bereichen Schutz- und
1 MBit/s Automatisierungstechnik in Schaltanlagen jeder
Spannungsebene und Ortsnetzstationen, Überwa-
sonstige USB1.1, I2C, SPI chung der Spannungsqualität, Wasserkraftwerke,
Schnittstellen Windenergieanlagen, dezentrale Energieerzeu-
I/O 31 frei prog. PIO-Pins (GPIO), gungsanlagen wie Photovoltaik, Kraft-Wärme-
3 x IRQ, 2 x externer DMA, Kopplung, Dieselgeneratoren, Batterien usw. sind
2 Timer Ein-/Ausgänge, 24-Bit mittels SCL direkt konfigurierbar.
Adressbus, 16-Bit Datenbus
Der IEC 61850 Software Stack PIS-10 kann als
Betriebsspg. 3,3V Client und als Server gestartet werden. Beide Ap-
Verlustleistung typ. 1 Watt plikationen können auf dem IPC@CHIP® zeit-
gleich koexistieren. Der Stack unterstützt IEC
Temp.-Bereich -25 bis 85 °C 61850 Services inklusive GOOSE und Übertra-
gung von Abtastwerten.
Software
Die Produkte IPC@CHIP® SC123 und SC143 sind Mehr Informationen finden Sie auf unserer Web-
wie die bekannten SC11/SC13 mit dem vorinstal- seite http://www.beck-ipc.com
IS_SC1x3_DE_V12.PDF Beck IPC GmbH

15
Datasheet: SC123 / SC143

The SC123/SC143 is an embedded web controller developed for
the industrial control and communication market.
It includes processor, RAM and FLASH memory, Ethernet and
serial interfaces, a complete microcontroller
interface with address/data bus, programmable chip selects and
GPIO.
This ready to use embedded plattform comes with a preinstalled
stack, a file system and a large application interface.
Technical data
Processor SC186-EX/96 MHz
Working memory (SDRAM) 8MB SDRAM (free user space
see API documentation)
Flash memory for operating 2 or 8 MB FLASH (free user
system and internal File System space see API documentation)
Asynchronous serial 4xRS232/TTL port (RxD, TxD,
RTS, CTS with DMA)
Ethernet 2 x 10/100BaseT (1xPHY +
1xMII)
I/O 31 GPIO, Intel 24 Bit Address,
16 Bit Data Bus
Operating system IPC@CHIP RTOS
Footprint PBGA177,1.27 Pitch, lead free/
RoHS conform
Features
» Eight programmable Chip » One SPI-bus (hardware)
Selects with 512-byte I/O » One USB 1.1 port (host
space and device)
» Four asynchronous serial » Two CAN2.0B ports
ports » Internal watchdog
» FLASH memory with min. » Four independent
100.000 write cycles external DMA channels
» Full integrated 10/100Base-T » Two independent
transceiver (IEEE 802.3 programmable Timers
standard)
» Three Interrupt inputs
» Four traffic LED outputs
» One I²C-bus (hardware)
DS_SC1x3_V7.PDF Beck IPC GmbH

16
Pin Configuration
Ball Grid Array Looking through Top of Package
Groups of signals:
VCC MII-Interface
GND Ethernet LEDs
Crystal, Reset CAN Bus
Adress-/Databus I²C Bus
Chip Selects, Interrupts, USB
Timer, etc.
Serial Ports Do not connect !
Ethernet

17
Package dimensions
2.34 REF
E1
E A1 Bal
e
2.34 REF
D1 D
Top View
Øb
Common Dimensions A1
Unit of Measure = mm
SYMBOL MIN NOM MAX
E 24.87 25 25 .13 A
E1 20,32 TYP
D 24.87 25 25 .13
D1 20,32 TYP
A - - 5 ,0
A1 0,28 - -
e 1,27 BSC
Øb 0,6 TYP
Moisture sensitivity: J-STD-20C; Level 3 Electrostatic

Pb free reflow process: J-STD-20C; Sensitive Device
250°C+0°C
IPC@CHIP SC xxx –F – yyy – LF

RoHs comaliant variant
Software licence
Unencapsulated variant (without housing)
Flash size
Single Chip
SC123-LF 00543257 SC123-IEC-LF 00543259
SC143-LF 00543258 SC143-IEC-LF 00543260

SC143-PIS-LF 00570582

18
IPC@CHIP DK61 Development Kit

®
The Development Kit for the IPC@CHIP® SC123 and SC143 Embedded Controller
DK61 Development Kit

The DK61 contains all the hardware and software
components required for the fast development of
custom applications:
• DK60 Development Board
• Paradigm C/C++ Compiler (Beck IPC edition
®
for IPC@CHIP ), RTOS Remote Debugger
and other tools
• CODESYS IEC61131-3 SDK for
SC123/SC143
• IEC 61850 stack (Client/Server, GOOSE) and
a configuration Tool based on SCL
• 100-240V / 24V plug-in power supply unit for
DK60 (with adapters for international use)
• 2 PC programming cable (RS232 and USB)
• Ethernet patch cable und cross over cable
• SD card
• Practical systainer
®
The IPC@CHIP DK61 Development Kit is a com-
plete development system for the new
®
IPC@CHIP SC123 and SC143 Embedded Con-
trollers.
In addition to the DK60 Development Board it also
contains the Paradigm C/C++ Compiler with the
®
IPC@CHIP RTOS Debugger and many other
tools required for creating C applications on the
SC123 and SC143 Embedded Controllers.
Despite the powerful hardware features of the De- DK60 Development Board
velopment Board, providing all the interfaces of the The development board provides on a double
SC123 and SC143, commissioning can be carried Eurocard all the functions required for working with
out easily in a few minutes thanks to the pre- the SC123/SC143 Embedded Controllers:
installed RTOS and the supplied “First Steps” • SC143-IEC Embedded Controller (96 MHz, 8
guide. MB RAM, 8 MB Flash)
The extensive hardware and software features • 2 x RS232 (Sub-D socket)
enable customized applications to be developed • 2 x RS232/TTL (connector)
quickly and efficiently. • 1 x USB1.1 (can be configured as host or de-
vice)
Programming and debugging are carried out via • 2 x CAN 2.0b
Ethernet as standard, and are also possible via • 2 x Ethernet 100Base-T
RS232 or USB. • MMC/SD and Compact Flash socket
The DK61 contains the CODESYS IEC61131-3 • Extension port for custom hardware expan-
software development kit for developing custom sions
IEC61131-3 PLC applications on the • Directly programmable I/O pins with LED indi-
SC123/SC143. cation
• Power Fail and Reset buttons
IEC 61850Li (Lite implementation) integrated
• Power supply, 24 VDC input
The IEC 61850-compliant PIS-10 software stack • Binding of real data to IEC 61850 models by
can be launched as a client and as a server. Both CID file loaded to controller
applications can coexist at the same time on the
IPC@CHIP®. The stack supports IEC 61850 ser- ®
Read more about the IPC@CHIP
vices including GOOSE and sampled values. product range at: http://www.beck-ipc.com
IS_DK61_EN_V8.PDF Beck IPC GmbH

19
IPC@CHIP® DK61 Development Kit

Version H03 – RoHS compliant
1. Lieferumfang 1. Content of delivery 1. Contenu de la livraison
• Development Board DK60 mit • Development Board DK60 with • Carte de développement DK60
Controller SC143-IEC-LF Controller SC143-IEC-LF avec Contrôleur SC143-IEC-LF
• Power Supply PSE10 • Power Supply PSE10 • Alimentation électrique PSE10
• Paradigm C/C++ Beck Edition CD • Paradigm C/C++ Beck Edition CD • Paradigm C/C++ Beck Edition CD
• CoDeSys Editior CD • CoDeSys Editior CD • CoDeSys Editior CD
• Nullmodem Kabel ZK14 • Nullmodem Cable ZK14 • Câble zéro modem ZK14
• USB 1.1 Kabel A/B mini • USB 1.1 Cable A/B mini • Câble USB 1.1 A/B mini
• Ethernet Patchkabel (grau) • Ethernet patch cable (grey) • Câble Ethernet droit (gris)
• Ethernet Crossover-Kabel (rot) • Ethernet cross over cable (red) • Câble Ethernet croisé (rouge)
• Secure Digital Speicher Karte • Secure Digital memory card • Carte Mémoire Secure Digital
2. Erste Schritte 2. Getting started 2. Premiers pas

Sie finden alle Informationen für eine Please download the complete Vous trouverez toutes les informations
einfache Inbetriebnahme unter: information package for an easy start- pour la mise en service à l’adresse :
www.beck-ipc.com/ipc/gettingstarted up from: www.beck-ipc.com/ipc/gettingstarted
Das Handbuch „Getting Started“ erklärt www.beck-ipc.com/ipc/gettingstarted Le manuel „Premiers pas“ explique la
die Inbetriebnahme des DK61. Bitte The manual “Getting Started” explains mise en service du DK61. Veuillez lire
lesen Sie das Handbuch sorgfältig und how the DK61 is put into operation. le manuel attentivement et suivre les
folgen Sie den Anweisungen zur Please read this document carefully consignes pour la mise en service.
Inbetriebnahme. and follow the instructions to put the
DK61 into operation.
3. CoDeSys IEC61131-3 3. CoDeSys IEC61131-3 programing 3. Programmation CoDeSys

Programmierung The Development Kit contains a IEC61131-3
Das Development Kit enthält einen SC143-IEC-LF, which includes a full Le kit de développement contient un
SC143-IEC-LF, der neben dem CoDeSys licence in addition to the SC143-IEC-LF qui comporte, outre le
Standard IPC@CHIP®-RTOS für standard IPC@CHIP®-RTOS for IPC@CHIP®-RTOS standard pour les
C/C++ Projekte zusätzlich eine C/C++ projects. projets C/C++, une licence complète
vollwertige Lizenz für CoDeSys- pour les projets CoDeSys.
Projekte enthält.
4. Technical documentation and 4. Documentation technique et
4. Technische Dokumentation und software logiciels
Software The technical documentation and Vous trouverez les documents
Die technischen Unterlagen und software for the DK61 and SC143 is techniques et les logiciels pour le
Software zum DK61 und zum SC143 available from: DK61 et le SC143 à l’adresse :
finden Sie unter: www.beck-ipc.com/ipc/download www.beck-ipc.com/ipc/download
www.beck-ipc.com/ipc/download
5. Exchange of experience with 5. Echange d’expériences avec
5. Erfahrungsaustausch mit anderen other users d’autre utilisateurs
Nutzern Please make use of the Nous vous prions de bien vouloir
Bitte nutzen Sie die Kommunikations- communication facilities provided via utiliser les possibilités de
möglichkeiten über unsere Newsgroup our news group to exchange communication qu’offrent notre forum
um Erfahrungen mit anderen Nutzern experience with other users. Visit the pour échanger vos expériences avec
auszutauschen. Sie finden die newsgroup at: d’autres utilisateurs. Vous trouverez le
Newsgroup unter: www.beck-ipc.com/forum forum à l’adresse :
www.beck-ipc.com/forum www.beck-ipc.com/forum
6. Technische Anmerkungen 6. Technical notes 6. Remarques techniques

a) Ethernet Kabel a) Ethernet cable a) Câble Ethernet
Bitte verwenden sie das graue Please use the grey patch cable for Veuillez utiliser le câble gris pour la
Patchkabel für die Verbindung the connection to a Hub/Switch. The connexion entre le DK60 et un
zwischen DK60 und einem Hub/ red Cross over cable shall be used for concentrateur/commutateur.
Switch. Das rote Crossover-Kabel ist a direct connection to a PC only. Le câble rouge n’est que pour une
nur für die Direktverbindung zwischen connexion direct entre le DK60 et
DK60 und einem PC geeignet. votre ordinateur.
b) Standard Konfiguration DK60 b) Standard Configuration DK60 b) Configuration standard DK60

Die folgende Abbildung zeigt die The following figure shows the La figure suivante montre la
Standard Konfiguration des DK60. Die standard configuration of the DK60. configuration standard du DK60. Les
Jumper sind wie folgt markiert: Jumpers are marked as follows: cavaliers sont marqués par un :
7. Allgemeine Nutzungsbedingungen 7. General conditions of use 7. Conditions générales d’utilisation

a) Anwendungsbereich a) Scope of application a) Domaine d’application L’utilisation
Die Nutzung des DK61 Development Use of the DK61 Development Kit is du kit de démarrage est autorisée
Kits ist ausschließlich unter den hier permissible solely on the conditions uniquement dans les
SUPPLEMENTARY_SHEET_DK61_V040.PDF Beck IPC GmbH

Version 4.0 (TN 695745) Grüninger Weg 24
© 2006 Beck IPC GmbH 35415 Pohlheim / Germany
20
genannten Bedingungen zulässig. Mit stated below. These conditions of use conditions mentionnées ci-dessous.
der Inbetriebnahme wird die Geltung shall be deemed as accepted with the Avec la mise en service, l’utilisateur
dieser Nutzungsbedingungen commissioning of the Development accepte ces conditions d’utilisation.
akzeptiert. Kit.
b) Exclusion de la garantie et
b) Ausschluss der Gewährleistung b) Exclusion of warranty and responsabilité
und Haftung liability Le produit présent est un système de
Bei dem vorliegenden Produkt handelt This product is a development system développement sans certification CE.
es sich um ein Entwicklungssystem without CE mark. Therefore the Le système doit par conséquent être
ohne CE-Freigabe. Das System darf system may only be used for utilisé exclusivement à des fins de
daher nur für Entwicklungszwecke development. Use of the Development développement. L’utilisation en dehors
eingesetzt werden. Die Nutzung Kit outside the specified environment de ce domaine d’application se fait au
außerhalb dieses Anwendungsgebietes is the responsibility of the user and risque et sous l’entière responsabilité
erfolgt auf Gefahr und Verantwortung shall be carried out at his or her own de l’utilisateur qui libère Beck de toute
des Nutzers und stellt Beck frei von risk, exempting Beck from any liability. responsabilité.
jeglicher Haftung. Claims by the user for compensation Les droits de garantie et de réparation
Gewährleistungs- und Schadensersatz- against Beck in conjunction with the de dommage de toute nature et
Ansprüche, gleich welcher Art und use of this product shall be excluded. quelque soit la base légale sont exclus
gleich aus welchem Rechtsgrund, sind dans ce contexte.
vor diesem Hintergrund Insofar that information, hardware,
ausgeschlossen. software and documentation is Dans la mesures où les informations,
transferred without charge, liability is le matériel, les logiciels et la
Sofern Informationen, Hardware, excluded for any material defects and documentation sont mis à la
Software und Dokumentation deficiencies in title of the information, disposition gratuitement, nous
unentgeltlich überlassen werden, ist hardware, software and récusons toute responsabilité pour les
eine Haftung für Sach- und documentation, in particular for their dommages matériels et les défauts
Rechtsmängel der Informationen, correctness or absence of faults, juridiques des informations, du
Hardware, Software und completeness and/or usability. matériel, les logiciels et de la
Dokumentation, insbesondere für deren documentation, notamment par
Richtigkeit, Fehlerfreiheit, Vollständig- rapport à leurs exactitude,
keit und/oder Verwendbarkeit d’éventuelles erreurs, leur caractère
ausgeschlossen. complet et/ou leur utilité.
1 Power supply
2 Power supply switch (optional)
3
Power LED
4
COM1 (COM) 8 9 10 12 13
1 4 5
5
COM0 (EXT)
6
COM2
7 3
COM3/SPI
8
USB Slave 2
9
USB Host
10 11
CAN0
11
CAN1 15
12
Ethernet I
13
Ethernet II
14
I2C
15
Expansion port
15 15
16
SC143-IEC-LF
16
17
SD/MMC 19 14 6
18
Compact Flash
19 20
Reset button
20
PFI button
21 7
8-Bit port switch
22
8-Bit port LED’s
15
18
17
21 22
Electrostatic Sensitive Device
SUPPLEMENTARY_SHEET_DK61_V040.PDF Beck IPC GmbH

Version 4.0 (TN 695745) Grüninger Weg 24
© 2006 Beck IPC GmbH 35415 Pohlheim / Germany
21

®
The Development Kit for the IPC@CHIP® SC243 Embedded Controller

• DB240 Development Board
®
• ONE – Workbench for the IPC@CHIP with
RTOS Remote Debugger and other tools
DK241 (with adapters for international use)
• 1 PC programming cable (RS232)
• Ethernet patch cable und cross over cable
• SD card
®
The IPC@CHIP DK241 Development Kit is a
complete development system for the new
®
IPC@CHIP SC243 Embedded Controllers.
DK241 Development Board
The development board provides on a double

In addition to the DK241 Development Board it Eurocard all the functions required for working with
also contains the ONE – Workbench for the the SC243 Embedded Controllers:
®
IPC@CHIP RTOS Debugger and many other • SC243 Embedded Controller (400 MHz, 64 MB
tools required for creating C applications on the RAM, 32 MB Flash)
SC243 Embedded Controllers. • 1 x Ethernet 100Base-T
Despite the powerful hardware features of the • 2 x RS232 (Sub-D socket)
Development Board, providing all the interfaces of • 4 x RS232/TTL (connector)
the SC243, commissioning can be carried out • 1 x USB1.1 Host
easily in a few minutes thanks to the pre-installed • 2 x CAN 2.0b
RTOS and the supplied “First Steps” guide. • MMC/SD and Compact Flash socket
• Extension port for custom hardware
expansions
The extensive hardware and software features • Directly programmable I/O pins with LED
enable customized applications to be developed indication
quickly and efficiently. • Reset button
Programming and debugging are carried out via • Power supply, 24 VDC input
Ethernet as standard, and are also possible via
RS232.
®
Read more about the IPC@CHIP product
range at: http://www.beck-ipc.com

22

®
The DK151 contains all the hardware components

required for the fast development of custom
applications:
• DB150 Development Board
• 100-240V / 24V plug-in power supply unit (with
adapters for international use)
• Null modem cable (RS232)
• Ethernet patch cable
• SD card
• USB micro-B Jack -> USB 2.0-A socket
The IPC@CHIP® DK151 Development Kit is a

complete development system for the embedded
controller IPC@CHIP® SC145 for industrial control
and IoT communication.
The IPC@CHIP® DK151 Development Kit contains

all hardware components, from the power supply
to the patch cable, for immediate commissioning.
Despite the powerful hardware features of the
Development Board, providing all the interfaces of
the SC145, commissioning can be carried out
DB150 Development Board
easily in a few minutes thanks to the pre-installed
RTOS-LNX and the supplied “First Steps” guide.
The development board provides on a double size
The PC based IDE (integrated development Eurocard all the functions required for working with
environment) "ONE-Workbench for IPC@CHIP®" is the SC145 Embedded Controllers:
available for download over the Internet at • IPC@CHIP® SC145
https://www.beck-ipc.com • 2 x Ethernet 100Base-T
• 2 x RS232 (Sub-D socket)
The extensive hardware and software features • 1 x RS485
enable customized applications to be developed • 2 x CAN (Sub-D socket)
quickly and efficiently. • 1 x USB OTG
Programming and debugging per default are • SD card socket
carried out via Ethernet. • Rechargeable Battery for RTC
• Socket for GM0x modem module
• Socket for Bluetooth and WiFi module
• Extension port for custom hardware
expansions
• SPI I/O-expander with DIP switch and LED´s
• Light Sensor VCNL4020
• Reset button
• PFI (power fail interrupt) button
• Power supply, 24 VDC input
®
Read more about the IPC@CHIP product
range at: https://www.beck-ipc.com
23

®

• DB54 development board
• SC23-IEC Embedded Controller (96 MHz, 8
MB RAM, 2 MB Flash)
• Paradigm C/C++ Compiler (Beck IPC edition
for IPC@CHIP®), RTOS Remote Debugger
and other tools
• CODESYS IEC61131-3 SDK for SC23
DB54 (with adapters for international use)
• 2 PC programming cables (RS232 and USB)
• Ethernet patch cable and crossover cable
• SD card
The IPC@CHIP® DK55 Development Kit is a
complete development system for the IPC@CHIP®
SC23 Embedded Controller. It contains all the
hardware and software components you require for
the fast evaluation and development of your
applications with the IPC@CHIP® SC23.
Thanks to the pre-installed RTOS and the

comprehensive “Getting Started” instructions, the
development board can be commissioned in a few
minutes.
DB54 Development Board
Simple creation of applications in C/C++ and The development board provides all the functions
IEC61131-3 that the SC23 Embedded Controller offers:
• Socket for SC23 Embedded Controller
As well as the DB54 development board with the • Ethernet 10/100Base-T
SC23 Controller the Development Kit also contains • 2 x RS232 (Sub-D socket)
the Paradigm C/C++ development environment for • 1 x CAN 2.0b (Sub-D socket and TTL signal on
Windows with a C/C++ compiler, a remote pin header)
debugger (via Ethernet) and many other tools. For • 1 x USB1.1 (can be configured as host or
creating C/C++ applications on the SC23 quickly device)
and simply.
• 1 x SPI, 1 x I2C bus
• MMC/SD socket
For the development of CODESYS IEC61131-3
applications, the Development Kit contains a • Extension port for custom hardware
CODESYS SP 2.3 Full RTS already adapted to the expansions
IPC@CHIP® that can be adapted to the individual • I/O port wit LEDs and Dip switch
requirements of custom applications with the help • 8 LED/8 dip switches for I/O simulation
of the supplied CODESYS Software Development • Freely programmable two-line text display for
Kit. outputting program information
• Power Fail and Reset buttons
The LC-display of the development board can be • Power supply, 24 VDC input
used for displaying program information and is an
application example for easy connection of text Read more about the IPC@CHIP® product
displays to the SC23, as well. range at: http://www.beck-ipc.com

24
Datasheet: DB54
Development Board
for IPC@CHIP SC23 Embedded Controller
Technical data
IPC@CHIP® Released for SC23-IEC Embedded
Embedded Controller Controller (not included)
Ethernet interface 10/100BaseT, RJ45 connectors
Serial interface 2 x RS232 (COM1, COM2), DSUB9
(asynchronous) connectors
1 x TTL (COM3), pin header
I²C interface I²C pin header
SPI interface SPI pin header (shared with COM3)
CAN interface 1 x CAN with CAN Transceiver ,
DSUB 9 connector
1 x CAN without CAN Transceiver,
pin header (shared with COM2)
USB Interface USB 1.1 Device / Host
SD/MMC interface SD/MMC Flash card interface for up
to 2 GB cards
I/O 8 way DIP Switch / 8 LED’s for
general purpose input / output
Display 2x16 Dot Matrix LCD
Extension pin headers extension pin headers with , PIO,
SPI, I²C and power supplys (8..30V
power supply, 5V, 3,3V)
Power-Fail emulation Push button for Power-Fail emulation
Reset Push button reset
Breadboard area for customer specific extensions
Supply voltage 24 VDC typical (8...30VDC)
Power consumption 1.7W
Operating temperature (TA) 0ºC to +55ºC
Size (BxLxH) 200mm x 157mm x 19mm
Weight 225g
RoHS compliant yes

Electrostatic Sensitive Device
Order-No.: 553946
DS_DB54_V2.PDF Beck IPC GmbH

Product: DB54 35578 Wetzlar/Germany
25
CODESYS für IPC@CHIP SC1x3 / SC2x ®
CODESYS V2.3 Programming System
The CODESYS IEC61131-3 programming system A complete CODESYS IEC Platform is composed
from 3S Smart Software Solutions GmbH is one of of a Target Support Package (TSP) and a PLC
the leading development tools for Programmable Run Time System (RTS).
Logic Controllers (PLC) and programmable
automation components.
The CODESYS V2.3 programming environment is

available free of charge from www.3s-
software.com or also from www.beck-ipc.com
CODESYS is an IEC-61131-3 programming tool

running on Windows. Al 5 languages defined in the CODESYS SP@CHIP
IEC norm are supported. Next to the programming
environment, the complete package contains The Run Time System “CODESYS SP@CHIP” is
manuals and an on-line help. The programming included inside the IPC@CHIP® variants (SC1x3-
tool is available in German, English and French IEC and SC2x-IEC). Further licences are not
language. Parts of the tool are also available in required.
other languages.
Next to the programming and configuration tools
CODESYS also includes a visualisation editor to
generate graphical representations with a direct
access to all IEC variables.
Integrated Visualisation functions:

Out of the graphical representations CODESYS is
also able to generate a Java-Applet that can be
represented by any browser through the integrated
web-server inside the IPC@CHIP®. For control
systems integrating the graphical add-on
IPC@CHIP® GC01 the generated graphical
representations can also be automatically
transformed in IEC61131-3 code and then
translated by the code generator for the
IPC@CHIP®.
Implemented on the IPC@CHIP® controller is the
CODESYS Runtime System version V2.3 Full.
IS_CODESYS_16Bit_EN_V03.PDF Beck IPC GmbH

26
CODESYS@CHIP SDK
Until now, the development of an IEC- The Internet capability and all further TCP/IP
programmable device required an elaborated services of the IPC@CHIP® remain fully available.
creation of a software tool or the complex and Using the CODESYS system libraries enables also
therefore cost-intensive implementation of a the access to the API-functions of the IPC@CHIP®
purchased software package. With the use of one RTOS.
of the IPC@CHIP® variants (SC1x3-IEC and SC2x-
IEC) this complexity disappears thanks to a pre-
implementation of the CODESYS SP@CHIP
Runtime System adapted in an optimal way to the
RTOS operating system.
With this solution you are not only able without any
complex development to develop programmable
devices; these are at the same time IEC-61131-3
and CAA-conform and therefore comply with
international standards.
For your hardware specific adaptation of the

CODESYS SP@CHIP Runtime System a software
development kit is available containing the runtime
system with all hardware independent interfaces
and functions as a c-library. Device specific drivers
and extensions can be added in a simple and
effective way as C/C++ functions to generate your
personal and device optimised run time system.
Using this SDK enables with a minimum of
Ready to use implemented run time systems (for
development the realisation of @CHIP based
our development boards) are available.
control products, programmable with CODESYS.
The SDK enables the generation of an adapted
Target Support Package required for the
CODESYS programming environment as well as
the CODESYS SP@CHIP Runtime System.
Further information is available on our website:
www.beck-ipc.com as well as www.3s-
software.com and www.automation-alliance.com.
In this way the hard and software functionalities of

your IPC@CHIP® based application are made
available to the CODESYS programmer including
the multitasking capabilities of the @CHIP-RTOS.
IS_CODESYS_16Bit_EN_V03.PDF Beck IPC GmbH

27
Paradigm C/C++ Beck IPC Edition

The state-of-the-art software development environment for the IPC@CHIP®
Visual Assist
Visual Assist is a powerful enhancement for the
Editor and supports you in automatic code
generation. Visual Assist intuitively completes your
functions, starts macros and offers suggestions for
code optimization. You just have to press the Tab
key at the start of a symbol and Visual Assist
completes the operation.
Borland C/C++ Paradigm C/C++

The Beck IPC Edition of the Paradigm C/C++ 5.02 Beck Edition
Compiler is a state-of-the-art integrated SC13/11/12 Support x x

development environment (IDE) for creating C and SC1x3/SC2x Support x
®
C++ programs for the IPC@CHIP controller Graphic IDE (Windows) x x
family. Integrated IPC@CHIP®
Debugger
x
The Paradigm C/C++ Compiler supports the 24-bit ®
® IPC@CHIP Debugger
address mode required for the new IPC@CHIP Support
x x
SC123/SC143 and SC23/SC24 series. Compared Code optimization -12% code size
to the Borland Compiler V5.02 however, the Visual Assist x
Paradigm also offers some benefits for the Eval. version available 40 days
®
IPC@CHIP with a 20-bit address space (SC13, Compatible with future
Windows versions
x
SC11 and SC12).
A clear benefit for you is the fact that the Paradigm Support via Beck IPC
(Internet Newsgroup,…)
x x
Compiler not only offers ensured use on future
Windows versions but also generates program
code for SC13, SC11 and SC12 that is up to 12%
Minimum system requirements
more compact – a real benefit for every customer!
• PC with Pentium III processor
• Microsoft Windows NT/2000/XP
Other benefit: Compatibility
• 256 MByte RAM
The Paradigm C/C++ Compiler is source code
• 100 MByte hard disk memory
compatible with the Borland C/C++ Compiler
Version 5.02. Existing source codes can be
Support - We are always there for you!
accepted without the need for any modifications.
Technical support for this product is provided
The Paradigm Compiler also works with the Beck
® exclusively by Beck IPC GmbH. Also take
Remote Debugger for IPC@CHIP . Changing
advantage of our newsgroup forum for exchanging
from Borland 5.02 to the Paradigm Compiler can
information with other users at:
therefore be carried out without any problem.
http://www.beck-ipc.com/forum.
RTOS API documentation and C library
® License
The IPC@CHIP RTOS API documentation is ®
The Beck Edition generates code for IPC@CHIP
incorporated in the Help system of the
Controllers exclusively. Other controllers are not
development environment. The API C libraries
supported. The Beck IPC Edition is available as a
come also already integrated and are thus
single-user license with a USB Key.
available directly to the user for developing the
application.
Further information: http://www.beck-ipc.com
IS_Paradigm_Compiler_EN_V5.PDF Beck IPC GmbH

28
Live Data
Get your com.tom today from www.com-tom.de
com.tom
IoT components
off the shelf
Realtime Internet Protocol

Kolibri
Streaming Automation
Beck IPC GmbH
2015.IoT.V1.EN
Nauborner Straße 184
35578 Wetzlar MADE
Germany
[email protected]
IN
www.beck-ipc.com GERMANY
Everything you need for your personal Internet of Things 29
IoT Reference Model Components

Cloud:
- realtime in-memory database

- load balancer
Collaboration & Processes - dynamic user interface
Customer Application
7 (Involving People & Business Processes) -
-
streaming automation
streaming analytics
- history database
- report generator
Application
6 (Reporting, Analytics, Control) Firewall
-
-
alarm manager
HMI generator
Load balancer
Portal UI Broker Applications
Data storage
Data Abstraction Hardware:
5 (Aggregation & Access)
- edge computing devices
- various industrial interfaces
Data Accumulation - realtime fieldbus connection
4 (Storage) Cloud Service, APPs and Service - amazing IoT as a chip platform
Software:
Edge Computing
3 (Data Element Analysis & - local CODESYS PLC
Transformation) - WEB PLC
- realtime Linux based operating
Connectivity Embedded system
2 (Communication & Processing Units) Devices Components - unbeatable Eclipse based
development tool
Physical Devices & Controllers Customer Application

1 (The “Things” in IoT)
B laCK . I
Software
RTOS-LNX (.R)
(continued) Get your com.tom
today from
com.tom
- @CHIP®-RTOS-LNX real-time www.com-tom.de The lol Edge
multitasking operating system
- CIC++ programming Controller
- ONE-Workbench: Eclipse-based
integrated development environment
with Cloud Portal
- Rich API with long-term compatibility
w
0
Beek IPC GmbH >'
Nauborner Stra e 184
35578 Wetzlar • MADE
Germany
[email protected]
• IN
www.beck-ipc.com • GERMANY N
Hardware Software
com.tom INDUSTRY features: All com.tom products are available with
- SC145 Embedded Controller these software variants:
- Ethernet (10/1OOBase-T)
- Serial interface (RS232/RS485) WEB-PLC (.W)
- CAN interface CODESYS (.C)
- microSD card slot
- Micro USB (USB 2.0) - @CHIP®-RTOS-LNX real-time
CTI 100.0108 multitasking operating system
Optional:
- UMTS modem - lnternal web server for setup and
- Wi-Fi (IEEE 802.11 a/b/g/n) + Bluetooth configuration (no external tools
- lntegrated 4-port Ethernet switch required)
- Digital inputs & outputs - Secure local and remote updates
- Analog inputs & outputs - lntegrated PLC:
- RTD inputs (PT1OO/PT1000)
• WEB-PLC: Visual programming
- M-Bus
editor running on the internal
- Wireless M-Bus*
web server
- PROFIBUS DP slave
CTI 100.UMTS • CODESYS: CODESYS Control
- PROFINET 10 device
- EtherNet/lP adapter SoftPLC v3.5 RTS with WebVisu
- EtherCAT master* - Security:
- CANopen master*
• Firewall
• OpenVPN client
com.tom GRAPHIC features: • IPsec*
- SC145 Embedded Controller - DHCP server
- 2 Ethernet ports (10/1OOBase-T)
- Wi-Fi (IEEE 802.11 a/b/g/n) + Bluetooth - NAT routing
- Serial interface (RS485) - CODESYS network variables
- CAN interface - SNMP manager
- 4.3" or 7" TFT with capacitive touch - OPC-UA server
- Panel or in wall mounting CTG 210.WLAN.DIS4C
- Modbus TCP client/server
- Modbus RTU master/slave
- loT communication interface using
*in development Kolibri technology
32
com.tom PORTAL UI Get your com.tom com.tom

The following features are included: today from Cloud & Portal
-
-
individual com.tom cloud server projects
map view for simple navigation
www.com-tom.de Service
- visualization (editor is integrated in the
Portal, no extra software)
- generation of reports in tabular form
(with CSV export) or as trend graph • Monitoring
- alarm management
- user management with alarm email • Reporting
and alarm SMS
- management of data points (nodes) • Alarming
- monitoring of connected com.tom
devices (keep alive) • Trending
• Localization
Cloud
for Industry
2015.CLOUD.V2.EN
Beck IPC GmbH
Nauborner Straße 184
35578 Wetzlar MADE
Germany
[email protected]
IN
www.beck-ipc.com GERMANY
com.tom Cloud Server 33
Platform for secure transmission, visualization and storage of process and configuration data.
Features Operations
Communication: The system can be operated in a public
or private IT environment. While using
- firewall/proxy friendly protocol (TCP port 443) the Beck operated instance of the
- full-duplex communication channel (WebSockets com.tom Cloud system following options
based) can be offered:
- keep-alive mechanism with offline detection
- low traffic (optimized for mobile networks) - professional hosting in a
- low latency (event-driven data transmission) state-of-the-art data center
- remote procedure call (RPC) support - located in Germany, operated by a
german company
- scalable virtual data center
Security: (private cloud)
- high availability
- end-to-end encryption (TLS) of the complete - permanent monitoring of service
communication availability and quality
- authentication: mandatory - service level agreement
- password policy (length, complexity, black list) - emergency hotline (24/7)
- authorization: fine-grained permission system for - several business models available:
data access - on premise
- SaaS (Software as a Service)
- PaaS (Platform as a Service)
Data model:
Cloud Server
- data types: boolean, integer (8/16/32/64 bit,
signed/unsigned), floating point (32/64 bit), string
(UTF-8), byte array
- flexible event-trigger configuration
- QoS levels (at most once, at least once, exactly
once, data log)
- scaling and formatting of values
- storage of historical data
34
Datasheet: com.tom INDUSTRY 115.W

The com.tom INDUSTRY 115.W is a ready-to-use gateway and
edge cloud controller for the rapid development of IoT
applications.
The device includes a local web server for parametrization,

programming logic (WEB-PLC, visual programming editor) and
alarm functions.
With the WEB-PLC editor and the integrated com.tom PORTAL

communication these devices offer turnkey solutions for process
data acquisition, process automation and remote service.
Technical data
IPC@CHIP® SC145 Embedded Controller
32-bit processor with 528 MHz
128 MB RAM (DDR3)
64 MB flash disk
Real-time clock Backed by a lithium rechargeable
battery
Ethernet interface 2 x 10/100BaseT
RJ45 connectors
Link and traffic LED indicators
Serial interface 1 x RS485
5.08/02 connector
SD card interface 1 x microSD card
SD / SDHC
Push/push slot
Supply voltage 24 VDC (-15%/+15%)
5.08/03 connector
Active current 50 mA (max)
Software
Operating System IPC@CHIP® RTOS-LNX Real-time
operating system
WEB-PLC editor and runtime Visual programming editor running on
the internal web server
Quick I/O mapping editor
Up to 1024 I/O values
Up to 256 portal variables
WEB-PLC diagram Up to 512 function units, I/O values,
portal variables and constants
IPO cycle time: 10 to 1000 ms
DS_CTI-115.W_V02.pdf Beck IPC GmbH

35
WEB-PLC function units Data type converters:

Bool, Uint8, Sint8, Uint16, Sint16,
Uint32, Uint64, Sint32, Sint64,
Float32, Float64, String
Binary:
AND, OR, XOR
Bits and bytes:
Extract, Pack, Put Bit, Shift Register,
Unpack
Controllers:
On/Off, P, Shade
Messages:
Send, Receive
Numerical:
Addition, Subtraction, Multiplication,
Division, Minimum, Maximum, Min
Acc, Max Acc, Average, Counter,
Compare, Signal Limiter, Signal
Converter, Signal Smoother, Signal
Tracker
Special:
First Cycle, OpenVPN, Portal Status
Storage, Selection, Edge Detection:
Demultiplexer, Multiplexer, RS
Flipflop, T Flipflop, Trigger, Analog
Trigger, Load Profile, State Machines
Timing:
Local Clock, Local Clock Timer, UTC
Clock, UTC Clock Timer, Stop Watch,
TON, TOFF, TP, Timer, Compare
Time, Time Switches
WEB-PLC additional functions Event log:
System events are logged to a circular
buffer in RAM with timestamp,
message and event type
Simple Network Time Protocol
(SNTP) synchronization of the system
clock
OpenVPN client:
Integrate the com.tom device into a
virtual private network
DHCP server:
Up to 100 clients, up to 20 static
leases
NAT:
Route traffic between a local (internal)
and a global (external) network, up to
1000 mappings, up to 50 static
mappings
Firewall:
Filter incoming traffic, up to 1000 rules
(including dynamic rules for outgoing
traffic), up to 50 static rules
Messages:

36
Send and receive short messages (up

to 10 templates respectively)
Modbus RTU master/slave:
Up to 32 devices and 512 values (up
to 1024 values including array
members)
Modbus TCP client/server:
Up to 32 devices and 512 values (up
to 1024 values including array
members)
CODESYS network variables:
Up to 32 lists and 512 values
SNMP manager:
Up to 32 agents and 512 values Trap
receiver
COM server:
According to RFC 2217
Time switches:
Up to 8 switches, crontab format
MicroBrowser interface
Local or remote installation of updates
(firmware or configuration)
Export:
Export the diagram and/or the settings
of the com.tom device as an update
package
OPC-UA server Micro Embedded Device Server
Profile
- User Token – User Name
Password Server Facet
- SecurityPolicies – None,
Basic128Rsa15, Basci256Sha256
- UA-TCP UA-SC UA-Binary
- Embedded DataChange
Subscription Server Facet
Up to 32 groups, 512 values, 1024
scalar values or array elements
Up to 4 concurrent client connections
com.tom PORTAL communication Transferred information:
- Device information
- Portal round trip times
- Update URL, trigger and status
- OpenVPN activation and status
- Event log messages
- I/O values
- Portal variables

37
Environmental data
Operating and storage humidity 5% to 95% relative humidity,
non-condensing
Protection class IP20
Mechanical data
Size (W x L x H) 37 x 97 x 62 mm
Material Plastic housing
Mounting DIN rail mounting
Compliance and Conformity

CE, RoHS/WEEE
- EMC emission IEC 61000-6-3
- EMC immunity IEC 61000-6-2
- Low Voltage Directive IEC 62368-1
- Protection Rating IEC 60529: IP20

38
Datasheet: com.tom INDUSTRY

The com.tom INDUSTRY devices are ready-to-use gateways and
edge cloud controllers for the rapid development of industrial IoT
application specific solutions.
There are many variants of the com.tom gateway with various

combinations of communication interfaces, communication
protocols, industrial Ethernet and fieldbuses.
All gateway variants support:
• Ethernet
• Modbus TCP client/server
• Modbus RTU master/slave
• OPC-UA server (in Q4/2017)
• CODESYS network variables
• SNMP manager
• OpenVPN client
• com.tom PORTAL client
• WEB-PLC programming logic
The features below are supported by specific gateway variants:
• 4-port Ethernet switch

• UMTS modem (GPS optional)
• Wi-Fi + Bluetooth
• M-Bus
• PROFINET IO Device
• PROFIBUS DP Slave
• EtherNet/IP Adapter
• Digital inputs/outputs
• Analog inputs/outputs
• RTD (resistance thermometer) inputs
The devices include a local web server for parametrization,

programming logic (WEB-PLC, visual programming editor) and
alarm functions.
With the WEB-PLC editor and the integrated com.tom PORTAL

communication these devices offer turnkey solutions for process
data acquisition, process automation and remote service.
DS_comtom_INDUSTRY_V07.pdf Beck IPC GmbH

39
Technical data
IPC@CHIP® SC145 Embedded Controller
32-bit processor with 528 MHz
128 MB RAM (DDR3)
64 MB flash disk
Real-time clock Backed by a lithium rechargeable
battery
Ethernet interface 1 x 10/100BaseT
RJ45 connector
Serial interface 1 x RS232/RS485 (selectable)
Weidmüller BL 3.50/08 connector
USB interface 1 x USB 2.0
Micro USB (type B) connector
OTG support
(future use)
SD card interface 1 x microSD card
SD / SDHC
Push/push slot
CAN interface 1 x CAN
Supply voltage 24 VDC (-15%/+15%)
Technical data - Ethernet switch

Ethernet interface 4-port Ethernet switch
10/100BaseT
RJ45 connectors
GPJ port Port ETH1.3/GPJ may be used to
supply power and connectivity for a
com.tom GRAPHIC device
Supply voltage (GPJ) 24 VDC (-15%/+15%)
Required only if a com.tom GRAPHIC
device is connected to ETH1.3/GPJ
Active current (GPJ) < 0.5 A
Technical data - UMTS modem

Frequencies GSM / GPRS / EDGE Quad band:
850 / 900 / 1800 / 1900 MHz
Frequencies UMTS / HSPA+ Seven band:
800 / 850 / 900 / AWS 1700 / 1900 /
2100 MHz
SIM card Full-size (1FF)
Push/push slot on the back
Antenna interface SMA female

40
Technical data - WLAN modem

Standards IEEE 802.11 a/b/g/n
Dual band (2.4 GHz, 5 GHz)
Modes Wi-Fi client
Wi-Fi access point (in Q4/2017)
Security WPA/WPA2-PSK
Antenna interface SMA female
Technical data - Digital I/O (DIO8)

Digital inputs 4 x sink
24 V DC, 5 mA (typ)
TRUE: 15 V DC min
FALSE: 5 V DC max
no potential isolation
Digital outputs 4 x Transistor (high-side)
24 V DC, 500 mA (max)
short-circuit and overload resistant
Connector Weidmüller BL 3.50/10
Technical data - Digital I/O (DIO32)

Digital inputs 16 x sink
24 V DC, 5 mA (typ)
TRUE: 15 V DC min
FALSE: 5 V DC max
Digital outputs 16 x Transistor (high-side)
24 V DC, 500 mA (max)
Connector 2 x Weidmüller BL 3.50/20
Technical data - Analog/Digital I/O (MIO16)

Digital inputs/outputs 8 x channels (input or output).
When used as an output the signal
can be read back via the input
function.
Inputs:
8 x sink (max)
24 V DC, 5 mA (typ)
TRUE: 15 V DC min
FALSE: 5 V DC max
Outputs:
8 x Transistor (high-side)
24 V DC, 500 mA (max)

41
Analog inputs 8 channels (voltage or current)

input type configurable per channel:
0 – 10 V / 4 – 20 mA (+/- 3%)
Technical data - Analog/Digital/RTD I/O (MIO12)

Digital inputs/outputs 4 x channels (input or output).
When used as an output the signal
can be read back via the input
function.
Inputs:
4 x sink (max)
24 V DC, 5 mA (typ)
TRUE: 15 V DC min
FALSE: 5 V DC max
Outputs:
4 x Transistor (high-side)
24 V DC, 500 mA (max)
Analog inputs 4 channels (voltage or current)
input type configurable per channel:
0 – 10 V / 4 – 20 mA (+/- 3%)
Analog outputs 2 channels
0 – 10 V, 10 mA (nom)
RTD inputs 2 x resistance thermometers (2-wire)
PT100 / PT500 / PT1000
Technical data - PROFINET (PN)

PROFINET interface 2-port PROFINET IRT switch
10/100BaseT
Connector 2 x RJ45
Profiles PROFINET I/O
LED indicators Module status / network status
Technical data - PROFIBUS (PB)

PROFIBUS interface PROFIBUS DP-V0 / DP-V1
Connector D-Sub9

42
Technical data - EtherNet/IP (EIP)

EtherNet/IP interface 2-port cut-through switch
10/100BaseT
Connector 2 x RJ45
Profiles Generic device
Technical data - M-Bus (MBUS)

M-Bus interface 1 channel
up to 64 devices
max. distance 5 km, 300 bit/s, AWG15
Digital S0 inputs 2 channels
10 mA, max. frequency 50 Hz
Digital outputs 2 channels (transistor, high side)
24 V DC, max. 500 mA
Software
Operating System IPC@CHIP® RTOS-LNX Real-time
operating system
WEB-PLC editor and runtime Visual programming editor running on
the internal web server
I/O mapping editor
Up to 8192 I/O values
Up to 1024 portal variables
WEB-PLC diagram Up to 2048 function units, I/O values,
portal variables and constants
IPO cycle time: 10 to 1000 ms
WEB-PLC function units Data type converters:
Bool, Uint8, Sint8, Uint16, Sint16,
Uint32, Sint32, Float32, Float64,
String
Binary:
AND, OR, XOR
Bits and bytes:
Extract, Pack, Put Bit, Shift Register,
Unpack
Controllers:
On/Off, P, Shade
Messages:
Send, Receive
Numerical:
Subtraction, Multiplication, Division,

43
Minimum, Maximum, Min Acc, Max

Acc, Average, Counter, Compare,
Signal Limiter, Signal Converter,
Signal Smoother, Signal Tracker
Special:
First Cycle, OpenVPN, Portal Status
Storage, Selection, Edge Detection:
Demultiplexer, Multiplexer, RS
Flipflop, T Flipflop, Trigger, Analog
Trigger, Load Profile, State Machines
Timing:
Local Clock, UTC Clock, Stop Watch,
TON, TOFF, TP, Timer, Compare
Time, Time Switches
WEB-PLC additional functions Event log:
System events are logged to a circular
buffer in RAM with timestamp,
message and event type
Simple Network Time Protocol
(SNTP) synchronization of the system
clock
OpenVPN client:
Integrate the com.tom device into a
virtual private network
DHCP server:
Up to 100 clients, up to 20 static
leases
NAT:
Route traffic between a local (internal)
and a global (external) network, up to
1000 mappings, up to 50 static
mappings
Firewall:
Filter incoming traffic, up to 1000 rules
(including dynamic rules for outgoing
traffic), up to 50 static rules
Messages:
Send and receive short messages (up
to 10 templates respectively)
Modbus RTU master/slave:
Up to 128 devices and 4096 values
(up to 8192 values including array
members)
Modbus TCP client/server:
(up to 8192 values including array
members)
CANopen slave:
Up to 1024 values (up to 4096 values
including array members)
PROFIBUS DP slave:
Up to 48 modules, up to 244 values
(per direction) with a total size of 244
bytes (per direction)

44
PROFINET IO device:
Up to 128 modules, up to 1308 values
EtherNet/IP adapter:
Up to 128 groups, up to 1448 values
M-Bus:
CODESYS network variables:
Up to 128 lists and 4096 values
SNMP manager:
Up to 128 agents and 4096 values
Trap receiver
COM server:
According to RFC 2217
Time switches:
Up to 8 switches, crontab format
MicroBrowser interface
Remote or local update via com.tom
PORTAL, local web server or
microSD card
Export:
Export the diagram and/or the settings
of the com.tom device as an update
package
com.tom PORTAL communication Transferred information:
- Device information
- Portal round trip times
- Update URL, trigger and status
- OpenVPN activation and status
- Cell modem SIM id and RSSI
- GPS coordinates
- Event log messages
- I/O values
- Portal variables

45
Environmental data
On request: -20°C to +60°C
Storage temperature -20°C to +60°C
Operating and storage humidity 5% to 85% relative humidity,
non-condensing
Protection class IP20
Mechanical data
Sizes (W x L x H) 46 x 105 x 78 mm
65 x 105 x 78 mm
Material Powder-coated steel sheet
RAL 7021, dull finish
Mounting DIN rail mounting
Compliance and Conformity

CE, R&TTE, RoHS/WEEE
- EMC emission IEC 61000-6-3
- EMC immunity IEC 61000-6-2
- Low Voltage Directive IEC 62368-1
- Protection Rating IEC 60529: IP20
- R&TTE Directive EN 301 489-1/-7, EN 301 511
Order information
CTI 100.W 00571144
CTI 100.UMTS.W 00571146
CTI 100.WLAN.W 00571178
CTI 140.W 00571145
CTI 140.UMTS.W 00571149
CTI 140.WLAN.W 00571179
CTI 100.DIO8.W 00571154
CTI 100.DIO8.UMTS.W 00571155
CTI 100.DIO8.WLAN.W 00571180
CTI 140.DIO8.W 00571181
CTI 140.DIO8.UMTS.W 00571182
CTI 140.DIO8.WLAN.W 00571183
CTI 100.DIO32.W 00571223
CTI 100.DIO32.UMTS.W 00571224
CTI 100.DIO32.WLAN.W 00571225
CTI 140.DIO32.W 00571226
CTI 140.DIO32.UMTS.W 00571227
CTI 140.DIO32.WLAN.W 00571228

46
CTI 100.MIO12.W 00571188

CTI 100.MIO12.UMTS.W 00571189
CTI 100.MIO12.WLAN.W 00571190
CTI 140.MIO12.W 00571191
CTI 140.MIO12.UMTS.W 00571192
CTI 140.MIO12.WLAN.W 00571193
CTI 100.MIO16.W 00571156
CTI 100.MIO16.UMTS.W 00571150
CTI 100.MIO16.WLAN.W 00571194
CTI 140.MIO16.W 00571195
CTI 140.MIO16.UMTS.W 00571196
CTI 140.MIO16.WLAN.W 00571197
CTI 100.MBUS.W 00571147
CTI 100.MBUS.UMTS.W 00571157
CTI 100.MBUS.WLAN.W 00571198
CTI 140.MBUS.W 00571199
CTI 140.MBUS.UMTS.W 00571200
CTI 140.MBUS.WLAN.W 00571201
CTI 100.PB.W 00571148
CTI 100.PB.UMTS.W 00571160
CTI 100.PB.WLAN.W 00571202
CTI 140.PB.W 00571203
CTI 140.PB.UMTS.W 00571204
CTI 140.PB.WLAN.W 00571205
CTI 100.PN.W 00571158
CTI 100.PN.UMTS.W 00571159
CTI 100.PN.WLAN.W 00571206
CTI 140.PN.W 00571207
CTI 140.PN.UMTS.W 00571208
CTI 140.PN.WLAN.W 00571209
CTI 100.EIP.W 00571151
CTI 100.EIP.UMTS.W 00571152
CTI 100.EIP.WLAN.W 00571184
CTI 140.EIP.W 00571185
CTI 140.EIP.UMTS.W 00571186
CTI 140.EIP.WLAN.W 00571187

47
Smart Grid Interface ri
Module: Increased SGIM

Smart Grid Interface Module
reliability for smart

energy supply
48
System features
3-phase monitoring of up to 10 low-voltage connections

Voltage, current, grid frequency, phase angle
Active, reactive and apparent power, current metering
Monitoring of switchgear cabinet temperature and humidity
Internet connection via LAN, OFC, UMTS
Availability of measurement data on portal server
DIN-compliant mounting to 185 mm busbar system of a
distribution enclosure or to a mounting panel
Industrial standard solution for comprehensive roll-out
Installation in live systems and plug-&-play commissioning
Modular design for maximum flexibility
Installation slots for measuring sensors
Installation slots for universal IOs
Investment protection thanks to upgradable features
Metering of voltage, current and

performance values
Data logs acc. to IEC 60870-5-104
Integrated current transformer connection
Configuration and data evaluation

via web tool
Integrated mobile communications gateway

for uncomplicated data transfer
Customer-specific alerts via SMS or email
Technical changes reserved 7

54
Electric specification
Power supply Additional specifications
Input: 1x 230V (L1) (100..240V) Power supply for external devices
50Hz, CAT IV Voltage +12V or +24V
Power consumption: <25VA Max. power 5W
Measurement Sensor for temperature and humidity

Voltage
Method Lx – N IO Module (1
Resolution 0.1 V 2 x relay contact
Value types average, minimum, maximum Contact voltage 250VAC CAT II
Sensor range max 300V Max. contact current 3A
Min. averaging time 60 s
Accuracy class 0,5 8 x NPN digital input (sourcing input)
UHmax +12V
Current Rogowski UHmin +5V9
with SGIM-Rogowski sensor set ULmax +3V9
Resolution 0.1 A Imax 5 mA
Sensor range to 15kA (1
Value types average, minimum, maximum only if optional modules are installed
Accuracy class 0.5 + RC accuray Norms and standards
class 1.0 with SGIM Rogowski
set SGIM conformity to EU regulations
• EMC Regulation 2014/30/EU
Current Transformer • Low Voltage Regulation 2014/35/EU
Resolution depending on CT (0,1mA x D) •
Secondary rated current 1A • Radio Equipment Directive (RED) 2014/53/EU
Restriction of Hazardous Substances (RoHS 2)
Sensor range 1,2 x CTCurrent Directive 2011/65/EU
Value types average, minimum, maximum
Accuracy class 0.5 + CT accuracy Measurement and monitoring according
to EN 61557-12
•
Grid frequency • active power (P) and active energy (E)
• reactive power (S) and reactive energy (E)
Resolution 0.01 Hz apparent power (Q) and apparent energy (E)
Value types average, minimum, maximum • grid frequency (f)
Min. averaging time 60 s • effective value (RMS) of line current (I) and
neutral line current (measured and calculated)
Power • value (RMS) of voltage (U)
effective
Active, reactive, apparent power
Min. averaging time 60 s active power
900 s (reactive-,
apparent power)
Energy (electric work)

reactive, active and
apparent power consumption and supply
Power quality
THD voltage, THD current Beck IPC GmbH
Value types average, minimum, maximum Nauborner Straße 184
Min. averaging time 900 s 35578 Wetzlar
Germany MADE
[email protected] IN
2018.SGIM.V3.EN
www.beck-ipc.com
www.com-tom.de GERMANY

Catalog Beck

Uploaded by

Copyright:

Available Formats

Catalog Beck

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Beck

Uploaded by

Copyright:

Available Formats

Inhoud

BECK IPC CHIP............................................................................................................................................ 2

BECK IPC CHIP

As like SC1x3 and SC2x the SC243 is planned

The IPC@CHIP® is a universal controller and Flash Memory 32 MByte

A development system designed for the new

IS_SC2x3_EN_V8.PDF Beck IPC GmbH

DS_SC243_V3.PDF Beck IPC GmbH

Design and handling guidelines

It is recommended to use the ZT200 to Electrostatic

IPC@CHIP SC xxx yyy

SC243 00563963 SC243-IEC3 00570736

DS_SC243_V3.PDF Beck IPC GmbH

New IPC@CHIP® SC23 / SC24 in the Module Housing

Software compatible with SC12 and SC123

The SC23/SC24 is fully software compatible with

The SC23/SC24 combines the CPU performance

IS_SC2x_EN_V5.PDF Beck IPC GmbH

This ready to use embedded platform comes with a preinstalled

DS_SC2x_V7.PDF Beck IPC GmbH

TXD1 2 31 PIO0 / INT5# / TMRIN1

PIO12 / CTS1 3 30 PIO1 / INT3 / TMROUT1

RTS1 4 29 PIO10 / TMROUT0

PIO22 / TXD2 5 28 PIO11 / TMRIN0

PIO21 / CANRXD1 / CTS2 7 SC2x 26 RSTOUT#

PIO20 / CANTXD1 / RTS2 8 25 PIO31 / I²CCLK

PIO28 / SDI / RXD3 9 24 PIO13 / I²CDTA

PIO27 / SDO / TXD3 10 23 CANRXD0

PIO19 / SCK / RTS3 11 22 CANTXD0

PIO18 / SLVSEL / CTS3 12 21 TPRX-

GND 16 17 RESETIN / Traffic LED

Design and handling guidelines

A DlL32 socket must be used within a Electrostatic

Ordering information / Order-No.:

DS_SC2x_V7.PDF Beck IPC GmbH

CAN 2 x CAN 2.0B

RTOS API functions are also available as LINUX@CHIP

IoT protocol stack for SC1x5

Modbus protocol stack

ONE Workbench for SC1x5

More information is available at our website:

Storage temperature -40ºC to +125ºC

(top view, through module)

DESCRIPTION CASTELLATIONS LGA

Design and handling guidelines

Moisture sensitivity: J-STD-20C; Level 3 Electrostatic

IPC@CHIP® SC 1x5 - yyyy

Memory configuration Working memory Flash memory NV-RAM

Orderable part numbers

IPC@CHIP® Type Fixed software licence, variant Part Number

IPC@CHIP SC123 / SC143 ®

IS_SC1x3_DE_V12.PDF Beck IPC GmbH

Datasheet: SC123 / SC143

DS_SC1x3_V7.PDF Beck IPC GmbH

Ball Grid Array Looking through Top of Package

DS_SC1x3_V7.PDF Beck IPC GmbH

Design and handling guidelines

Moisture sensitivity: J-STD-20C; Level 3 Electrostatic

IPC@CHIP SC xxx –F – yyy – LF