Atxk H14
Atxk H14
Features Applications
• Miniature package size 2.15 x 1.35 x 1.1mm • Frequency reference for real time clocks (RTCs)
• Frequency Stability options: ±3.8ppm over -10 to +60°C, • Portable & wearable electronics
±5.0ppm over -40 to +85°C, & ±8.0ppm over -40 to +105°C • Internet of Things (IoT)
• Output waveform CMOS • Consumer electronics
• Low power consumption • Timing synchronization for networks, servers, hubs, routers &
• Supply Voltage options: 3.3V, 2.5V, 1.8V switches
Symmetry @ ½ VDD 45 55 %
VOH 90%VDD
Output Voltage 10%VDD V
VOL
Output Load 15 pF CMOS
Output Waveform CMOS
“1” (VIH≥0.8*VDD) or Open: Oscillation;
Tri-state function V
“0” (VIL<0.2*VDD): No Oscillation/Hi Z
Note 1: All measurements made over specified operating temperature range, at nominal VDD, and 15pf load, unless otherwise specified.
Note 2: Operational voltage range: 1.5V to 3.63V
Note 3: Absolute maximum ratings are the values that must not be exceeded. This product may suffer damage if any one of these parameter
ratings is exceeded. Operation and characteristics are guaranteed only when the product is operated per the specification datasheet.
Note 4: VDD is a VDD value of recommended operating conditions.
Part Identification
ATXK-H14- - 32.768kHz - -
Packaging
Vdd (V) Blank: Bulk
C: 2.5V±5% T3: 3000pcs/reel
D: 1.8V±5%
E: 3.3V±5%
Mechanical Dimensions
Pin # Function
1 Output Enable
2 GND
3 Output
4 Vdd
Table 1
SnPb Eutectic Process
Classification Temperatures (Tc)
Package Volume mm3 Volume mm3
Thickness <350 >350
Table 2
Pb-Free Process
Classification Temperatures (Tc)
Package Volume mm3 Volume mm3 Volume mm3
Thickness <350 350-2000 >2000
<1.6 mm 260 °C 260 °C 260 °C
1.6 mm - 2.5 mm 260 °C 250 °C 245 °C
>2.5 mm 250 °C 245 °C 245 °C
Packaging
T3: 3,000pcs/reel
Dimensions: mm
ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products
are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life
and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact
Abracon LLC for more information.